If any of these utilities detect a bad superblock magic, call
check_plausibility to see if blkid can identify the passed-in argument
as something else (xfs, partition, etc.) in the hopes of catching a
user error.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
ext2fs_flush2() unconditionally writes the block group descriptors to
disk even if the underlying FS isn't marked dirty. This causes the
following error message on a fsck -n run:
e2fsck 1.43-WIP (09-Jul-2014)
Pass 1: Checking inodes, blocks, and sizes
Pass 2: Checking directory structure
Pass 3: Checking directory connectivity
Pass 4: Checking reference counts
Pass 5: Checking group summary information
Error writing block 2 (Attempt to write block to filesystem resulted in short write). Ignore error? no
Error writing block 2 (Attempt to write block to filesystem resulted in short write). Ignore error? no
Error writing file system info: Attempt to write block to filesystem resulted in short write
Since ext2fs_close2() only calls flush if the dirty flag is set,
modify e2fsck to exhibit the same behavior so that we don't spit out
write errors for a read only check.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
A user who sees the message
***** REBOOT LINUX *****
or
***** FILE SYSTEM WAS MODIFIED *****
might think that e2fsck was complete even though we haven't finished
writing out the superblock or bitmap blocks, and then either forcibly
reboot or power cycle the box, or yank the USB key out while the
storage device is still being written (before e2fsck exits).
So rearrange the exit path of e2fsck so that we flush out the dirty
superblock/bg descriptors/bitmaps before we print the final message.
Also clean up this code so that the flow of control is easier to
understand, and add error checking to catch any errors (normally
caused by I/O errors writing to the disk) for these final writebacks.
Addresses-Debian-Bugs: #757543, #757544
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: Dan Jacobson <jidanni@jidanni.org>
Add regression tests to examine how e2fsck deals with MMP blocks with
(a) a bad magic number; and (b) an incorrect checksum.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When we call ext2fs_close_free at the end of main(), we need to supply
the address of ctx->fs, because the subsequent e2fsck_free_context
call will try to access ctx->fs (which is now set to a freed block) to
see if it should free the directory block list. This is clearly not
desirable, so fix the problem.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
If e2fsck knows the bitmaps are bad at the exit (probably because they
were bad at the start and have not been fixed), don't offer to
recreate the journal because doing so causes e2fsck to abort a second
time.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
After a journal replay, we close and reopen the file system so that
any changes in the superblock can get reflected in the libext2fs's
internal data structures. We need to save the flags passed to
ext2fs_open() that we used when we originally opened the file system.
Otherwise we will end up not be able to repair a file system which
requires a journal replay and which has bigalloc enabled or which has
more than 2**32 blocks; e2fsck will abort with the error message:
fsck.ext4: Filesystem too large to use legacy bitmaps while trying to re-open
Addresses-Debian-Bug: 744953
Cc: Андрей Василишин <a.vasilishin@kpi.ua>
Cc: Jon Severinsson <jon@severinsson.net>
Cc: 744953@bugs.debian.org
Currently there are many uses of ext2fs_close() which might be wrong.
First of all ext2fs_close() does not set the ext2_filsys pointer to NULL
so the caller is responsible for clearing it, however there are some
cases there we do not do it.
Second of all very small number of users of ext2fs_close() actually
check the return value. If there is a problem in ext2fs_close() it will
not even free the ext2_filsys structure, but majority of users expect it
to do so.
To fix both problems this commit introduces a new helper
ext2fs_close_free() which will not only check for the return value and
free the ext2_filsys structure if the call to ext2fs_close2() failed,
but it will also set the ext2_filsys pointer to NULL.
Replace every use of ext2fs_close() in e2fsprogs tools with
ext2fs_close_free() - there is no real reason to keep using
ext2fs_close().
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
The phrases "mounted" and "in use" were filled in untranslated into
the messages. But it is better to gettextize entire sentences, and
not synthesize them from fragments.
Signed-off-by: Benno Schulenberg <bensberg@justemail.net>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
If there are any PREEN_OK problems fixed in check_super_block(), don't
skip checking the full file system.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
There is no reason to use e2fsck_global_ctx in
e2fsck_set_bitmap_type(), since we can get the context structure from
fs->priv_data.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The e2fsck_global_ctx varible was only being set if HAVE_SIGNAL_H is
defined. There are systems, such as Android, where this is not true.
This was causing e2fsck_set_bitmap_type() to seg fault since
e2fsck_global_ctx was not NULL.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reported-by: JP Abgrall <jpa@google.com>
Mostly by adding static and removing excess extern qualifiers. Also
convert a few remaining non-ANSI function declarations to ANSI.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Compiling with LLVM generates a large number of warnings due
to the use of _() for wrapping strings for i18n:
warning: format string is not a string literal
(potentially insecure) [-Wformat-security]
./nls-enable.h:4:14: note: expanded from macro '_'
#define _(a) (gettext (a))
^~~~~~~~~~~~
These warnings are fixed by using "%s" as the format string,
and then _() is used as the string argument.
Signed-off-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
We need to store some error codes using an int to keep recovery.c as
close as possible to the recovery.c source file in the kernel.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Fix all the places where we should be using a blk64_t instead of a
blk_t. These fixes are more severe because 64bit values could be
truncated silently.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
In try_open_fs(), if ext2fs_open2() returns an error, do not try to
access the struct ext2_filesys. The previous check 'if (ret_fs)' was
always true, but even 'if (*ret_fs)' might be incorrect in some cases,
so check 'retval==0' instead.
Signed-off-by: Nickolai Zeldovich <nickolai@csail.mit.edu>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Check and handle MMP checksum problems by resetting the block.
Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Use the helper function to determine if group descriptors have a
checksum. Ensure that metadata_csum and uninit_bg flags are not set
simultaneously, as part of pass 0.
Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
If e2fsck finds a superblock with an invalid checksum, try the
backups.
Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
In addition to the free blocks and free inodes, also print the number
of blocks and inodes in the verbose statistics.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Disks have gotten bigger, so 8 digits might not be enough. Allow for
12 digits worth of blocks, which is more than enough for 3 petabytes.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Add report_time, report_verbose, and report_features options to
e2fsck.conf which enable additional, more verbose reporting by e2fsck.
This is useful for large cloud installations where there are a large
number file systems being managed, and where it may not be obvious
from the e2fsck log files exactly how a particular file system is
configured.
The report_time and report_verbose options, which are the same as the
-tt and -v command line options, respectively, are useful because they
are options specific to e2fsck, and the fsck program does not have a
way of passing certain options only to a specific /sbin/fsck.<fstype>
program.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Previously e2fsck would only allow a mounted file system to be checked
if it was the root file system and it was mounted read-only. Now
allow any file system mounted read-only if the -f option is specified.
This makes it easier to test how e2fsck handles checking file systems
which are mounted without having to test on the root file system.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This reverts commit 47c1b8e166.
The original reason for this commit was to speed up boots for hard
drives. However, I've measured the time difference on a 1TB laptop
drive, and it's not significant: 70ms vs 10ms when running e2fsck on a
clean file system.
The problem with this optimization is that we don't notice if the
journal superblock has a non-zero s_errno field. If we don't transfer
the error indicator from the journal superblock to the file system
superblock, then the kernel will transfer it when the file system is
remounted read-write, causing scary messages to appear in the syslog.
(And since there was a bug in the kernel code which didn't clear the
error indicator in the journal superblock, it would never get
cleared.)
Reported-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Commit 732e26b98e added checks to
prevent e2fsck from being run in filesystem-modifying mode against
a mounted or otherwise busy device, due to several bug reports of
users doing this even with the verbose warnings in check_mount().
However, it also prevented e2fsck from checking a mounted root
filesystem, which will prevent the node from booting. Once again
allow e2fsck to run against the mounted root filesystem if it is
also mounted read-only at the time.
Signed-off-by: Andreas Dilger <adilger@whamcloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Currently, if e2fsck is run without the "-n" flag (i.e. it
might modify the filesystem), there is no guarantee that it will
open the filesystem with the EXCLUSIVE flag (i.e. O_EXCL) to
prevent the block device from being checked (in most cases this
means mounted, but it could also be an MD/LVM member device).
Conversely, if e2fsck is run with "-n" (i.e. read-only), and
/etc/mtab or /proc/mounts does not report the block device as
mounted then e2fsck thinks the filesystem is unmounted. In this
case, e2fsck incorrectly sets the EXCLUSIVE flag, which causes
the check to fail, even though e2fsck is running read-only.
To fix this, do not open with EXCLUSIVE if it is a read-only check,
and always open with EXCLUSIVE if the filesystem might be changed.
This also prevents filesystem mounts while e2fsck is running.
Also refuse allow e2fsck to run at all if the filesystem is BUSY.
The e2fsck check_mount() was checking for MOUNTED, but not BUSY,
and it should refuse to run outright if the block device is BUSY.
The previous MOUNTED heuristics pre-date the O_EXCL reservation
by the kernel, so there could be uncertainty due to stale /etc/mtab
data, but with newer kernels a busy device should never be modified.
Signed-off-by: Andreas Dilger <adilger@whamcloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Currently fsck recomputes quotas and overwrites quota files
whenever its run. This causes unnecessary modification of
filesystem even when quotas were never inconsistent. We also
lose the limits information because of this. With this patch,
e2fsck compares the computed quotas to the on-disk quotas
(while updating the in-memory limits) and writes out the
quota inode only if it is inconsistent.
Signed-off-by: Aditya Kali <adityakali@google.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Change autoconf to test for setmntent() and use that to decide whether
to use getmntent() and setmntent(), since some systems don't have
setmntent() but they do have the mntent.h header file.
Also, remove the includes of mntent.h from e2fsck and mke2fs and other
places where it is not needed.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Theodore Ts'o