define(MULTIARCH_HEADERS,ifdef(`DO_MULTIARCH', Multi-Arch: same Pre-Depends: ${misc:Pre-Depends},REMOVE_ME))dnl define(UTIL_LINUX_NG_DEFINES, ifdef(`UTIL_LINUX_NG', ``libblkid-dev (>= 2.16), uuid-dev (>= 2.16),''))dnl Source: e2fsprogs Section: admin Priority: required Maintainer: Theodore Y. Ts'o Build-Depends: gettext, texinfo, pkg-config, gcc-multilib [mips mipsel], libfuse-dev [linux-any kfreebsd-any], libattr1-dev, debhelper (>= 9.0), UTIL_LINUX_NG_DEFINES m4 Standards-Version: 3.9.8 Homepage: http://e2fsprogs.sourceforge.net ifdef(`FUSE2FS',`` Package: fuse2fs Priority: optional Depends: ${shlibs:Depends}, ${misc:Depends} Architecture: linux-any kfreebsd-any Description: ext2 / ext3 / ext4 file system driver for FUSE fuse2fs is a FUSE file system client that supports reading and writing from devices or image files containing ext2, ext3, and ext4 file systems. '')dnl ifdef(`E2FSCK_STATIC',`` Package: e2fsck-static Priority: optional Depends: ${misc:Depends} Recommends: sash | bash-static | zsh-static | busybox-static | zsh30-static Architecture: any Description: statically-linked version of the ext2/ext3/ext4 filesystem checker This may be of some help to you if your filesystem gets corrupted enough to break the shared libraries used by the dynamically linked checker. . This binary takes much more space than its dynamic counterpart located in e2fsprogs, though. . You may want to install a statically-linked shell as well, to be able to run this program if something like your C library gets corrupted. '')dnl Package: libcomerr2 Section: libs Provides: libcomerr-kth-compat Depends: ${shlibs:Depends}, ${misc:Depends} Replaces: e2fsprogs (<< 1.34-1) Architecture: any MULTIARCH_HEADERS Description: common error description library libcomerr is an attempt to present a common error-handling mechanism to manipulate the most common form of error code in a fashion that does not have the problems identified with mechanisms commonly in use. Package: comerr-dev Section: libdevel Priority: extra Depends: libc6-dev | libc-dev, libcomerr2 (= ${mainBinary}), ${misc:Depends} Suggests: doc-base Replaces: e2fslibs-dev (<< 1.33-2), libkrb5-dev (<< 1.3) Architecture: any Description: common error description library - headers and static libraries libcom_err is an attempt to present a common error-handling mechanism to manipulate the most common form of error code in a fashion that does not have the problems identified with mechanisms commonly in use. . This package contains the development environment for the com_err library. Package: libss2 Section: libs Depends: libcomerr2, ${shlibs:Depends}, ${misc:Depends} Replaces: e2fsprogs (<< 1.34-1) Architecture: any MULTIARCH_HEADERS Description: command-line interface parsing library libss provides a simple command-line interface parser which will accept input from the user, parse the command into an argv argument vector, and then dispatch it to a handler function. . It was originally inspired by the Multics SubSystem library. Package: ss-dev Section: libdevel Priority: extra Depends: libc6-dev | libc-dev, libss2 (= ${mainBinary}), comerr-dev, ${misc:Depends} Architecture: any Description: command-line interface parsing library - headers and static libraries This package includes a tool that parses a command table to generate a simple command-line interface parser, the include files needed to compile and use it, and the static libs. . It was originally inspired by the Multics SubSystem library. . This package contains the development environment for the ss library. ifdef(`UTIL_LINUX_NG',,`` Package: libuuid1 Section: libs Depends: passwd, ${shlibs:Depends}, ${misc:Depends} Recommends: uuid-runtime Replaces: e2fsprogs (<< 1.34-1) Architecture: any MULTIARCH_HEADERS Description: Universally Unique ID library The libuuid library generates and parses 128-bit universally unique ids (UUIDs). A UUID is an identifier that is unique across both space and time, with respect to the space of all UUIDs. A UUID can be used for multiple purposes, from tagging objects with an extremely short lifetime, to reliably identifying very persistent objects across a network. . See RFC 4122 for more information. Package: uuid-runtime Section: libs Priority: optional Depends: passwd, libuuid1 (>> 1.40.3-1), ${shlibs:Depends}, ${misc:Depends} Replaces: e2fsprogs (<= 1.40.3-1ubuntu1) Architecture: any Description: runtime components for the Universally Unique ID library The libuuid library generates and parses 128-bit universally unique ids (UUIDs). A UUID is an identifier that is unique across both space and time, with respect to the space of all UUIDs. A UUID can be used for multiple purposes, from tagging objects with an extremely short lifetime, to reliably identifying very persistent objects across a network. . See RFC 4122 for more information. . This package contains the uuidgen program and the uuidd daemon. . The uuidd daemon is used to generate UUIDs, especially time-based UUID’s, in a secure and guaranteed-unique fashion, even in the face of large numbers of threads trying to grab UUID’s running on different CPU’s. It is used by libuuid as well as the uuidgen program. ifdef(`UDEB_PKGS',`` Package: libuuid1-udeb Package-Type: udeb Section: debian-installer Priority: optional Depends: ${shlibs:Depends} Architecture: any Description: stripped down universally unique id library, for debian-installer libuuid generates and parses 128-bit universally unique ids (UUIDs). See RFC 4122 for more information. . This is a minimal package for debian-installer. '')dnl Package: uuid-dev Section: libdevel Priority: extra Depends: libc6-dev | libc-dev, libuuid1 (= ${mainBinary}), ${misc:Depends} Replaces: e2fslibs-dev (<< 1.15) Architecture: any Description: universally unique id library - headers and static libraries libuuid generates and parses 128-bit universally unique ids (UUIDs). See RFC 4122 for more information. . This package contains the development environment for the uuid library. Package: libblkid1 Section: libs Depends: ${shlibs:Depends}, ${misc:Depends} Architecture: any Description: block device id library The blkid library which allows system programs like fsck and mount to quickly and easily find block devices by filesystem UUID and LABEL. This allows system administrators to avoid specifying filesystems by hard-coded device names, but via a logical naming system instead. ifdef(`UDEB_PKGS',`` Package: libblkid1-udeb Package-Type: udeb Section: debian-installer Priority: optional Depends: ${shlibs:Depends}, ${misc:Depends} Architecture: any Description: stripped down block device id library, for debian-installer The blkid library which allows system programs like fsck and mount to quickly and easily find block devices by filesystem UUID and LABEL. This allows system administrators to avoid specifiying filesystems by hard-coded device names, but via a logical naming system instead. . This is a minimal package for debian-installer. '')dnl Package: libblkid-dev Section: libdevel Priority: extra Depends: libc6-dev | libc-dev, libblkid1 (= ${binary:Version}), ${misc:Depends} Architecture: any Description: block device id library - headers and static libraries The blkid library which allows system programs like fsck and mount to quickly and easily find block devices by filesystem UUID and LABEL. This allows system administrators to avoid specifiying filesystems by hard-coded device names, but via a logical naming system instead. . This package contains the development environment for the blkid library. '')dnl ifdef(`UDEB_PKGS',`` Package: e2fsprogs-udeb Package-Type: udeb Section: debian-installer Priority: optional Depends: ${shlibs:Depends}, ${misc:Depends} Architecture: any Description: stripped-down versions of e2fsprogs, for debian-installer This package is an e2fsprogs package built for a reduced size, so that it can help to save space in debian-installer. . Don'''``t attempt to install this package, it has no support for a couple of features you surely want. Anyway it should refuse to install. '')dnl Package: e2fslibs Section: libs Depends: ${shlibs:Depends}, ${misc:Depends} Replaces: e2fsprogs (<< 1.34-1) Provides: libext2fs2, libe2p2 Architecture: any MULTIARCH_HEADERS Description: ext2/ext3/ext4 file system libraries The ext2, ext3 and ext4 file systems are successors of the original ext ("extended") file system. They are the main file system types used for hard disks on Debian and other Linux systems. . This package provides the ext2fs and e2p libraries, for userspace software that directly accesses extended file systems. Programs that use libext2fs include e2fsck, mke2fs, and tune2fs. Programs that use libe2p include dumpe2fs, chattr, and lsattr. Package: e2fslibs-dev Section: libdevel Priority: extra Depends: libc6-dev | libc-dev, comerr-dev, e2fslibs (= ${binary:Version}), ${misc:Depends} Suggests: doc-base Provides: ext2fs-dev, e2p-dev Replaces: libkrb5-dev (<< 1.3) Architecture: any Description: ext2/ext3/ext4 file system libraries - headers and static libraries The ext2, ext3 and ext4 file systems are successors of the original ext ("extended") file system. They are the main file system types used for hard disks on Debian and other Linux systems. . This package contains the development environment for the ext2fs and e2p libraries. Package: e2fsprogs Essential: yes ifdef(`UTIL_LINUX_NG', ``Pre-Depends: ${shlibs:Depends}, ${misc:Depends}, util-linux (>= 2.15~rc1-1) '', ``Pre-Depends: ${shlibs:Depends}, ${misc:Depends} '')dnl Multi-Arch: foreign Suggests: gpart, parted, fuse2fs, e2fsck-static Conflicts: dump (<< 0.4b4-4), quota (<< 1.55-8.1), initscripts (<< 2.85-4), sysvinit (<< 2.85-4) Replaces: hurd (<= 20040301-1), libblkid1 (<< 1.38+1.39-WIP-2005.12.10-2), libuuid1 (<< 1.38+1.39-WIP-2005.12.10-2) Architecture: any Description: ext2/ext3/ext4 file system utilities The ext2, ext3 and ext4 file systems are successors of the original ext ("extended") file system. They are the main file system types used for hard disks on Debian and other Linux systems. . This package contains programs for creating, checking, and maintaining ext2/3/4-based file systems. It also includes the "badblocks" program, which can be used to scan for bad blocks on a disk or other storage device. ifdef(`USE_DBGSYM',,`` Package: e2fsprogs-dbg Section: debug Priority: extra Depends: e2fsprogs (= ${binary:Version}), ${misc:Depends} Architecture: any Description: debugging information for e2fsprogs This package includes the debug information useful for debugging e2fsprogs and its libraries, contained in the e2fsprogs and e2fsck-static packages. The debug information is used for execution tracing and core dump analysis. '') ifdef(`USE_DBGSYM',,ifdef(`UTIL_LINUX_NG',,`` Package: uuid-runtime-dbg Section: debug Priority: extra Depends: uuid-runtime (= ${binary:Version}), ${misc:Depends} Architecture: any Description: debugging information for uuid-runtime This package includes the debug information useful for debugging the uuid runtime programs, contained in the uuid-runtime package. The debugging information is used for execution tracing and core dump analysis. ''))dnl ifdef(`USE_DBGSYM',,`` Package: e2fslibs-dbg Section: debug Priority: extra Depends: e2fslibs (= ${binary:Version}), ${misc:Depends} Architecture: any Description: debugging information for e2fslibs This package includes the debug information useful for debugging the ext2fs and e2p libraries, contained in the e2fslibs package. The debug information is used for execution tracing and core dump analysis. Package: libcomerr2-dbg Section: debug Priority: extra Depends: libcomerr2 (= ${binary:Version}), ${misc:Depends} Architecture: any Description: debugging information for libcomerr2 This package includes the debug information useful for debugging the com_err library, contained in the libcomerr2 package. The debugging information is used for execution tracing and core dump analysis. Package: libss2-dbg Section: debug Priority: extra Depends: libss2 (= ${binary:Version}), ${misc:Depends} Architecture: any Description: debugging information for libss2 This package includes the debug information useful for debugging the ss library, contained in the libss2 package. The debug information is used for execution tracing and core dump analysis. '')dnl ifdef(`USE_DBGSYM',,ifdef(`UTIL_LINUX_NG',,`` Package: libblkid1-dbg Section: debug Priority: extra Depends: libblkid1 (= ${binary:Version}), ${misc:Depends} Architecture: any Description: debugging information for libblkid1 This package includes the debug information useful for debugging the blkid library, contained in the libblkid1 package. The debug information is used for execution tracing and core dump analysis. Package: libuuid1-dbg Section: debug Priority: extra Depends: libuuid1 (= ${binary:Version}), ${misc:Depends} Architecture: any Description: debugging information for libuuid1 This package includes the debug information useful for debugging the UUID library, contained in the libuuid1 package. The debug information is used for execution tracing and core dump analysis. ''))dnl