vitalif
/
e2fsprogs
mirror of https://github.com/vitalif/e2fsprogs
1
0
Fork 0
Code Issues Releases Wiki Activity
e2fsprogs/resize/ChangeLog

703 lines
22 KiB
Plaintext
Raw Blame History

2006-06-24 Theodore Ts'o <tytso@mit.edu>
* Release of E2fsprogs 1.40
2007-06-12 Theodore Tso <tytso@mit.edu>
* resize2fs.c (resize_fs): Clear the EXT2_FLAG_MASTER_SB_ONLY flag
to make sure the superblock changes are written out to the
backup superblocks.
2007-05-22 Theodore Tso <tytso@mit.edu>
* sim_progress.c (ext2fs_progress_init): Fix type-punning warning.
* resize2fs.h: #include the e2p.h header file to get the function
prototypes.
* resize2fs.c (adjust_fs_info): Declare new_inodes as an unsigned
long long to avoid gcc -Wall complaints on 64-bit
platforms.
(adjust_fs_info): Fix signed vs unsigned complaint.
* online.c (online_resize_fs): Mark flags parameter as unused.
Make new_desc_blocks be an unsigned long to fix signed
vs. unsigned comparsions, and fix up the printf format
* main.c (main): Fix signed vs. unsigned comparison
2007-05-18 Theodore Tso <tytso@mit.edu>
* main.c (determine_fs_stride): Use the superblock s_raid_stride
if it is set; save the hueristically determined stride to
the superblock if it is not set.
2007-03-18 Theodore Tso <tytso@mit.edu>
* resize2fs.c (check_and_change_inodes): Check to make sure the
inode write was sucessful.
2006-12-22 Theodore Tso <tytso@mit.edu>
* main.c (main): Use the new {add,remove}_error_table comerr
interfaces instead of initialize_*_error_table.
2006-10-01 Theodore Tso <tytso@mit.edu>
* online.c (online_resize_fs): Check to make sure the filesystem
has a resize inode if it is needed to grow the filesystem.
Print the correct error message if the kernel returns an
ENOTTY error to the group extend ioctl.
(Addresses Debian bug #380548)
2006-08-30 Eric Sandeen <esandeen@redhat.com>
* online.c (online_resize_fs): use div_ceil for r_frac calculation.
* resize2fs.c (adjust_fs_info): avoid overflow in blk calculation
when figuring new reserved blocks count.
2006-08-30 Eric Sandeen <esandeen@redhat.com>
* resize2fs.c (adjust_fs_info): Disallow > 2^32 indoes at resize time.
2006-08-30 Eric Sandeen <esandeen@redhat.com>
* online.c (online_resize_fs): Fix printf formats.
2006-08-30 Eric Sandeen <esandeen@redhat.com>
* resize2fs.c (mark_table_blocks): Remove unused variable.
2006-08-30 Theodore Tso <tytso@mit.edu>
* resize2fs.c (adjust_fs_info), online.c (online_resize_fs): Use
e2p_percent to properly calculate the number of reserved
blocks without worrying about overflow.
* resize2fs.c (ext2fs_calculate_summary_stats): Fix potential
overflow problems when the number of blocks is close to
2**31.
* resize2fs.c (adjust_fs_info): Use ext2fs_div_ceil() instead of a
using an open-coded expression which was subject to
overflows.
2006-05-22 Theodore Tso <tytso@mit.edu>
* resize2fs.8.in: Fixed spelling mistake (Addresses Debian Bug:
#368393)
2006-05-21 Theodore Tso <tytso@mit.edu>
* resize2fs.8.in: Clarify man page to indicate that supports ext2
and ext3 filesystems, and add reference to LVM.
(Addresses Debian Bug: #368179)
2006-05-14 Theodore Tso <tytso@mit.edu>
* main.c (main, determine_fs_stride), resize2fs.8.in: Add a new
option (-S) to resize2fs which allows the user to specify
the RAID stride parameter to be used on new block groups.
In addition, add code so that resize2fs can automatically
determine the RAID stride parameter that had been
previously used on the filesystem.
2006-03-18 Theodore Ts'o <tytso@mit.edu>
* main.c, resize2fs.c: Change printf statements to use %u instead
of %d when printing block numbers.
* main.c (main): If the filesystem is mounted, open it in
read-only mode since the userspace program should not try
to modify it directly. If the filesystem is not mounted,
open it in exclusive mode to avoid potential problems
(such as someone trying to mount the filesystem while it
is being resized).
2006-03-17 Theodore Ts'o <tytso@mit.edu>
* resize2fs.8.in: Update manpage to document that that resize2fs
can expand a mounted filesystem.
* online.c (online_resize_fs): New file which contains the on-line
resizing code.
* main.c (main): If the filesystem to be resized is already
mounted, determine the mountpoint, and call online_resize_fs().
* resize2fs.c (adjust_fs_info, adjust_superblock): Factor out code
which only adjusts the in-memory data structures from the
code which writes to the disk, since the former can be
used by the on-line resizing code.
* resize2fs.h: Add function prototypes for online_resize_fs() and
adjust_fs_info().
* Makefile.in (RESIZE_OBJS): Add online.o to list of files to be built.
2005-12-29 Theodore Ts'o <tytso@mit.edu>
* resize2fs.c (mark_table_blocks): Remove unused variables to
clean up gcc -Wall complaints.
* main.c (main): If the filesystem being resized is a regular
file, truncate or expand the file to match the new
filesystem size. (Addresses Debian Bug: #271607)
2005-08-08 Theodore Ts'o <tytso@mit.edu>
* resize2fs.c (move_itables): Fix fencepost error caught by valgrind.
(adjust_superblock): Clear the newly allocated descriptor
blocks when we allocate them to avoid false positives from
valgrind (and so that the unusued descriptors at the tail
end of the newly allocated descriptor blocks are zero'ed
out, include of random garbage).
2006-06-30 Theodore Ts'o <tytso@mit.edu>
* Release of E2fsprogs 1.38
2005-05-09 Theodore Ts'o <tytso@mit.edu>
* resize2fs.c (fix_resize_inode): Don't bother to translate
debugging printf's.
* main.c: Fix case on usage message, and remove _() from messages
from a version string that doesn't need translation.
2005-03-21 Theodore Ts'o <tytso@mit.edu>
* Release of E2fsprogs 1.37
2006-02-05 Theodore Ts'o <tytso@mit.edu>
* Release of E2fsprogs 1.36
2005-01-26 Theodore Ts'o <tytso@mit.edu>
* resize2fs.c: Fix bug where we don't release the blocks belonging
to the old inode table blocks when we move the inode
table. (Addresses Debian Bug: #290894)
2005-01-05 Theodore Ts'o <tytso@mit.edu>
* main.c (main): Use parse_num_blocks() from the e2p library to
parse the number of blocks from the command line.
2004-12-16 Theodore Ts'o <tytso@mit.edu>
* resize2fs.c (resize_fs): Call ext2fs_create_resize_inode to
fill in the necessary fields in the resize inode.
(adjust_superblock): Reserve blocks that are needed for
on-line resizing if that feature is enabled.
2004-12-14 Theodore Ts'o <tytso@mit.edu>
* Makefile.in: Move strip command to install-strip target.
Use Linux-kernel-style makefile output for "make install"
* Makefile.in (installdirs): Use $(MKINSTALLDIRS) macro
2004-11-30 Theodore Ts'o <tytso@mit.edu>
* main.c: If there is a question mark in the device name,
separate out the options to the IO layer, and pass it on
to ext2fs_open2().
* Makefile.in: Use Linux-kernel-style makefile output to make it
easier to see errors/warnings.
2004-09-17 Theodore Ts'o <tytso@mit.edu>
* resize2fs.c (check_and_change_inodes): Fix debugging printf to
mask off the high 256 bits of dirent->name_len (which is
where the file type information is stored). (Addresses
Debian Bug #271605)
2004-04-03 Theodore Ts'o <tytso@mit.edu>
* Makefile.in: Update the modtime even if subst doesn't need to
update the resize2fs man page, to avoid always re-running
subst, especially since there are no dependencies on the
man page.
2004-02-28 Theodore Ts'o <tytso@mit.edu>
* Release of E2fsprogs 1.35
2003-12-07 Theodore Ts'o <tytso@mit.edu>
* main.c, resize2fs.c: Fix gcc -Wall nitpicks.
2003-08-24 Theodore Ts'o <tytso@mit.edu>
* resize2fs.8.in: Adjust description line so that apropos
"ext2" or "ext3" will find the man page. (Addresses
Debian Bug #206845)
2003-08-01 Philipp Thomas <pthomas@suse.de>
* extent.c, resize2fs.c, sim_progress.c: ext2fs_getmem(),
ext2fs_free_mem(), and ext2fs_resize_mem() all now take a
'void *' instead of a 'void **' in order to avoid pointer
aliasing problems with GCC 3.x.
2003-07-25 Theodore Ts'o <tytso@mit.edu>
* Release of E2fsprogs 1.34
2003-07-08 Theodore Ts'o <tytso@mit.edu>
* main.c (main): Round the default size of the filesystem to be an
even multiple of the pagesize to work around a potential
Linux kernel bug.
2003-06-24 <tytso@snap.thunk.org>
* resize2fs.c (block_mover): Don't move blocks associated with the
bad blocks inode. Instead, just remove them from the
badblocks list. (Note this means that shrinking and then
enlarging a filesystem is not a reversible operation;
information about bad blocks in the part of the filesystem
which is to be chopped off is discarded.)
2003-06-08 Theodore Ts'o <tytso@mit.edu>
* resize2fs.8.in: Make explicit that you need to run resize2fs
after using fdisk to adjust the partition size when
expanding the filesystem. (Addresses Debian Bug #195616)
2003-05-13 root <tytso@mit.edu>
* main.c (main): Add the ability to specify units to the size
parameter, and make the error and information messages
display explicitly the blocksize used by the filesystem,
to avoid confusion. (Addresses Debian bug: #189814)
2003-05-03 Theodore Ts'o <tytso@mit.edu>
* main.c (main): Add calls to setup functions for NLS support.
* Makefile.in: Add $(LIBINTL) to the link line so we can support
using the internal gettext library.
* resize2fs.h: Add #ifndef protection around LOCALEDIR definition.
2003-04-21 Theodore Ts'o <tytso@mit.edu>
* Release of E2fsprogs 1.33
2003-04-21 Theodore Ts'o <tytso@mit.edu>
* Makefile.in: Use DYLD_LIBRAY_PATH so that "make check" works on
Darwin systems when building with shared libraries.
2003-03-06 <tytso@mit.edu>
* resize2fs.c (blocks_to_move): Bug fix; we were incorrectly
moving the block and inode bitmaps for sparse superblock
filesystems. (Address Debian bug #174766)
2002-11-09 Theodore Ts'o <tytso@mit.edu>
* Release of E2fsprogs 1.32
2002-11-08 Theodore Ts'o <tytso@mit.edu>
* Release of E2fsprogs 1.31
2002-10-31 Theodore Ts'o <tytso@mit.edu>
* Release of E2fsprogs 1.30
2002-10-31 Theodore Ts'o <tytso@mit.edu>
* resize2fs.c (inode_scan_and_fix, check_and_change_inodes): When
moving an inode, set the ctime field so that people using
dump/restore will backup the changed inode. Also update
the mtime and ctime of directories which get updated when
we need to move an inode.
2002-10-30 Theodore Ts'o <tytso@mit.edu>
* Makefile.in (install): Search all compression extensions when
deleting old man pages.
* resize2fs.c (adjust_superblock, mark_table_blocks,
blocks_to_move): Add support for resizing filesystems that
use the meta block group layout.
* main.c (main): Fixed bug that erroneously (and
needlessly) checked the incompat feature flag field
against the supported ro_compat feature set.
2002-10-03 Theodore Ts'o <tytso@mit.edu>
* resize2fs.8.in: Fix typo in man page.
2001-09-24 Theodore Tso <tytso@mit.edu>
* Release of E2fsprogs 1.29
2001-08-31 Theodore Tso <tytso@thunk.org>
* Release of E2fsprogs 1.28
2002-08-16 Theodore Ts'o <tytso@mit.edu>
* resize2fs.c (inode_scan_and_fix): Add code to move the extended
attribute block.
2002-07-26 Theodore Ts'o <tytso@mit.edu>
* resize2fs.c (block_mover): If there are no blocks to move,
release the bmap table. This significantly speeds up
resize2fs when shrinking or expanding a filesystem by a
very small number of blocks (which EVMS will do).
2002-05-28 <tytso@mit.edu>
* main.c (main): If the filesystem has errors or is not valid,
then require an e2fsck -f run be done on the filesystem
more.
2002-04-09 <tytso@snap.thunk.org>
* main.c (main): If resize_fs returns an error, don't print the
message stating that the filesystem was resized.
2002-03-31 <tytso@mit.edu>
* main.c (main): If we are resizing a plain file which is smaller
than the requested size, then we will attempt to
transparently extend the filesize in a sparse fashion by
writing a block at the end of the requested part of the
filesystem.
* main.c (main), resize2fs.c (resize_fs), resize2fs.h: Change the
function prototype of resize_fs() so that it can modify
the new_size parameter with the actual new size of the
filesystem after the resize operation. (This can
sometimes be less than the requested new size if there
isn't enough space to create the necessary block group
metadata for that last bit of disk space.) Resize2fs now
prints the actual new size of the filesystem when it finishes.
2002-03-08 Theodore Tso <tytso@mit.edu>
* Release of E2fsprogs 1.27
2002-03-07 Theodore Tso <tytso@mit.edu>
* resize2fs.c (process_block, inode_scan_and_fix,
check_and_change_inodes): Fix gcc -Wall complaints in
debug code.
* Makefile.in (check): Use LD_LIBRARY_PATH to run test programs.
(From Philipp Thomas <pthomas@suse.de>)
2002-02-24 Theodore Tso <tytso@mit.edu>
* Makefile.in (install): Remove any compressed man pages before
installing the man pages.
2002-02-03 Theodore Tso <tytso@thunk.org>
* Release of E2fsprogs 1.26
2001-09-20 Theodore Tso <tytso@thunk.org>
* Release of E2fsprogs 1.25
2001-09-02 Theodore Tso <tytso@thunk.org>
* Release of E2fsprogs 1.24a
2001-08-30 Theodore Tso <tytso@thunk.org>
* Release of E2fsprogs 1.24
2001-08-15 Theodore Tso <tytso@valinux.com>
* Release of E2fsprogs 1.23
2001-06-23 Theodore Tso <tytso@valinux.com>
* Release of E2fsprogs 1.22
2001-06-15 Theodore Tso <tytso@valinux.com>
* Release of E2fsprogs 1.21
2001-06-01 Theodore Tso <tytso@valinux.com>
* Makefile.in: Move include/asm/types.h.in to
lib/ext2fs/ext2_types.h.in.
2001-05-25 Theodore Tso <tytso@valinux.com>
* Release of E2fsprogs 1.20
2001-05-14 Theodore Tso <tytso@valinux.com>
* resize2fs.h: Change location of ext2_fs.h to be ext2fs/ext2_fs.h
2001-01-11 <tytso@snap.thunk.org>
* main.c (main): Use ext2fs_sync_device() instead of calling the
BLKFLSBUF ioctl directly.
* extent.c, main.c, resize2fs.c: Change ino_t to ext2_ino_t.
2001-01-01 <tytso@snap.thunk.org>
* main.c (main): Replace use of struct ext2fs_sb with struct
ext2_super_block.
2000-12-08 <tytso@snap.thunk.org>
* Makefile.in: Fix so that top-level "make check" works correctly.
2000-07-13 <tytso@valinux.com>
* Release of E2fsprogs 1.19
2000-07-05 <tytso@snap.thunk.org>
* Makefile.in (install): Install resize2fs in /sbin, not /usr/sbin.
2000-06-12 Theodore Ts'o <tytso@valinux.com>
* main.c, resize2fs.c, resize2fs.h, extent.c: Add NLS support.
2000-04-06 Theodore Ts'o <tytso@valinux.com>
* Update copyright of files in preparation for release of
resize2fs. Also removed the (obsolete) beta-test check
that had been in the code, as well as the old spec files
used to package the separate distribution of resize2fs.
* Makefile.in: No longer build resize2fs.static, since there's no
real point in it any more.
2000-04-03 Theodore Ts'o <tytso@valinux.com>
* main.c: For platforms that don't define optarg.h, manually
define optarg and optind.
2000-02-02 Theodore Ts'o <tytso@valinux.com>
* resize2fs.h: Remove unneeded #include of linux/fs.h
* main.c: Fix gcc -Wall bug. main() should return an int.
1999-11-19 <tytso@valinux.com>
* Makefile.in (distclean): Remove TAGS and Makefile.in.old from
the source directory.
1999-11-10 <tytso@valinux.com>
* Release of E2fsprogs 1.18
1999-10-26 <tytso@valinux.com>
* Release of E2fsprogs 1.17
1999-10-22 <tytso@valinux.com>
* Release of E2fsprogs 1.16
1999-07-18 Theodore Ts'o <tytso@rsts-11.mit.edu>
* Release of E2fsprogs 1.15
1999-01-09 Theodore Ts'o <tytso@rsts-11.mit.edu>
* Release of E2fsprogs 1.14
1998-12-15 Theodore Ts'o <tytso@rsts-11.mit.edu>
* Release of E2fsprogs 1.13
1998-12-03 Theodore Ts'o <tytso@rsts-11.mit.edu>
* Makefile.in: Updated dependencies.
1998-09-29 Theodore Ts'o <tytso@rsts-11.mit.edu>
* main.c (main): Print a feedback message stating the new size of
the filesystem when we're through.
1998-09-02 Theodore Ts'o <tytso@rsts-11.mit.edu>
* resize2fs.c: Rename max to max_groups and max_dirs to avoid
possible conflicts with a cpp macro named "max".
1998-07-26 Theodore Ts'o <tytso@rsts-11.mit.edu>
* resize2fs.h: Protect include of unistd.h with HAVE_UNISTD_H.
1998-07-09 Theodore Ts'o <tytso@rsts-11.mit.edu>
* Release of E2fsprogs 1.12
1998-06-10 Theodore Ts'o <tytso@rsts-11.mit.edu>
* resize2fs.c (process_block): Change blkcnt_t to be e2_blkcnt_t
to avoid collision with LFS API.
1998-04-28 Theodore Ts'o <tytso@rsts-11.mit.edu>
* extent.c (ext2fs_create_extent_table): Use ext2fs_free_mem
instead of free().
(extent_cmp): Use EXT2_QSORT_TYPE to define the appropriate
return type for comparison functions for qsort.
1998-04-26 Theodore Ts'o <tytso@rsts-11.mit.edu>
* resize2fs.c (adjust_superblock):
* extent.c (ext2fs_add_extent_entry): Update functions to
pass the old size of the memory to be resized to
ext2fs_resize_mem().
1998-03-30 Theodore Ts'o <tytso@rsts-11.mit.edu>
* Makefile.in: Change to use new installation directory variables
convention. Fix uninstall rules to take $(DESTDIR) into
account. Remove cat8dir from the installdirs target,
since modern man package don't necessarily put the cat
directory in /usr/man/cat?.
1998-03-29 Theodore Ts'o <tytso@rsts-11.mit.edu>
* extent.c (extent_cmp): Add const to cast to prevent -Wall warning.
* main.c (check_mount): Rename function argument to prevent -Wall
warning.
1998-03-24 Theodore Ts'o <tytso@rsts-11.mit.edu>
* main.c (main): Check to make sure we can really resize this
filesystem. If there are compatible feature sets that we
don't support, we need to abort.
* resize2fs.c: Change to use the new prototype required by
block_iterate2 (which uses blkcnt_t for the blockcount).
1998-03-20 Theodore Ts'o <tytso@rsts-11.mit.edu>
* resize2fs.c (inode_scan_and_fix): If we are expanding the
filesystem, temporarily set
rfs->old_fs->super->s_blocks_count to ultimate size of the
filesystem, to avoid catching an error on the block
iterator.
Mon Mar 9 12:02:47 1998 Theodore Ts'o <tytso@rsts-11.mit.edu>
* main.c: Use a local version.h file.
Sat Mar 7 18:18:04 1998 Theodore Ts'o <tytso@rsts-11.mit.edu>
* Makefile.in: Change the name of the complete source file that we
built (that includes resize2fs) to be
e2fsprogs-ALL-<version>.tar.gz. Don't link with libuuid,
since it's not needed.
* main.c (main): Add copyright notice.
* resize2fs.c (blocks_to_move): Create the meta_bmap using the old
filesystem, not the new filesystem.
(get_new_block): Don't try checking the old block bitmap
if the block we're testing is beyond the boundaries of the
old filesystem.
Fri Feb 27 01:02:50 1998 Theodore Ts'o <tytso@rsts-11.mit.edu>
* Makefile.in: Add rule to build a static version of resize2fs.
Update dependency rules.
* main.c: #include ../version.h, instead of using a hard-coded
version string.
Tue Feb 24 15:22:52 1998 Theodore Ts'o <tytso@rsts-11.mit.edu>
* Change the progress function to return an errcode_t; this allows
the progress function to return a error indicating a
user-requested cancel.
1998-02-20 Theodore Y. Ts'o <tytso@edt.mit.edu>
* main.c (check_mount, main): Resize2fs now checks the size of the
partition, and uses this as a default new_size of the
partition if one is not specified. Resize2fs will not let
you resize a mounted partition.
* resize2fs.c: Change how the progress function for the INODE_SCAN
pass is performed, so that the maximum size is never zero.
* resize2fs.8.in: Updated man page.
Mon Feb 16 17:13:01 1998 Theodore Ts'o <tytso@rsts-11.mit.edu>
* resize2fs.c, resize2fs.h, main.c, ext2_block_move.c,
ext2_inode_move.c: Major reoganization of how resizing
works. Functions in ext2_block_move.c, and
ext2_inode_move.c moved into resize2fs.c. Multiple passes
in those two files also combined into a single inode
scanning pass. Made the inode table moving function
better handling the case where it needs to abort
mid-operation. When moving blocks around, made the block
allocation function preferentially avoid the old group
descriptor blocks, to make resize2fs more robust.
Fri Feb 13 17:15:43 1998 Theodore Ts'o <tytso@rsts-11.mit.edu>
* resize2fs.c, resize2fs.h, ext2_block_move.c, ext2_inode_move.c,
main.c: Reorganize how the progress functions are called.
Mon Jan 19 09:12:28 1998 Theodore Ts'o <tytso@rsts-11.mit.edu>
* resize2fs.h: If EXT2_FLAT_INCLUDES is defined, then assume all
of the ext2-specific header files are in a flat directory.
* ext2_block_move.c, ext2_inode_move.c, extent.c, resize2fs.c,
resize2fs.h: Rename variables named "new" to "new_block",
"new_inode", or "new_loc" to avoid C++ reserved word
clash.
* ext2_block_move.c, ext2_inode_move.c, extent.c, resize2fs.c,
sim_progress.c: Use ext2fs_get_memory(),
ext2fs_free_memory(), et. al., instead of malloc() and
free().
* ext2_block_move.c, ext2_inode_move.c, extent.c: Explicitly cast
all assignments from void * to be compatible with C++.
Mon Dec 29 19:09:45 1997 Theodore Ts'o <tytso@rsts-11.mit.edu>
* banalysis.c, banalysis.h, ext2_inode_move.c, ext2_block_move.c:
Change private to priv_data to avoid C++ namespace clash.
Mon Nov 3 14:45:06 1997 Theodore Ts'o <tytso@rsts-11.mit.edu>
* resize2fs.h: Remove STDC magic, since everyone is STDC these days.
* resize2fs.c, ext2_block_move.c ext2_inode_move.c: Only include
printf statements if RESIZE2FS_DEBUG is defined.
* main.c: Don't read in the bitmaps since resize2fs.c does that.
Sun Oct 19 20:40:42 1997 Theodore Ts'o <tytso@rsts-11.mit.edu>
* resize2fs.h: Add #ifdef's for HAVE_SYS_TYPES_H and HAVE_SYS_TIME_H.
Wed Sep 3 17:31:49 1997 Theodore Y. Ts'o <tytso@edt.mit.edu>
* resize2fs.h: Add #include for errno.h
Tue Jun 17 01:33:20 1997 Theodore Ts'o <tytso@rsts-11.mit.edu>
* Release of E2fsprogs 1.11
Reference in New Issue View Git Blame Copy Permalink