**NOTE:** When [migrating from v2 with no v3 data](https://github.com/etcd-io/etcd/issues/9480), etcd server v3.2+ panics when etcd restores from existing snapshots but no v3 `ETCD_DATA_DIR/member/snap/db` file. This happens when the server had migrated from v2 with no previous v3 data. This also prevents accidental v3 data loss (e.g. `db` file might have been moved). etcd requires that post v3 migration can only happen with v3 data. Do not upgrade to newer v3 versions until v3.0 server contains v3 data.
**NOTE:** if you enable auth and use lease(lease ttl is small), it has a high probability to encounter [issue](https://github.com/etcd-io/etcd/issues/11689) that will result in data inconsistency. It is strongly recommended upgrading to 3.2.31+ firstly to fix this problem, and then upgrade to 3.3. In addition, if the user without permission sends a `LeaseRevoke` request to the 3.3 node during the upgrade process, it may still cause data corruption, so it is best to ensure that your environment doesn't exist such abnormal calls before upgrading, see [#11691](https://github.com/etcd-io/etcd/pull/11691) for detail.
Changed `--auto-compaction-retention` flag to [accept string values](https://github.com/etcd-io/etcd/pull/8563) with [finer granularity](https://github.com/etcd-io/etcd/issues/8503). Now that `--auto-compaction-retention` accepts string values, etcd configuration YAML file `auto-compaction-retention` field must be changed to `string` type. Previously, `--config-file etcd.config.yaml` can have `auto-compaction-retention: 24` field, now must be `auto-compaction-retention: "24"` or `auto-compaction-retention: "24h"`. If configured as `--auto-compaction-mode periodic --auto-compaction-retention "24h"`, the time duration value for `--auto-compaction-retention` flag must be valid for [`time.ParseDuration`](https://golang.org/pkg/time/#ParseDuration) function in Go.
`etcdserver.EtcdServer` has changed the type of its member field `*etcdserver.ServerConfig` to `etcdserver.ServerConfig`. And `etcdserver.NewServer` now takes `etcdserver.ServerConfig`, instead of `*etcdserver.ServerConfig`.
Before and after (e.g. [k8s.io/kubernetes/test/e2e_node/services/etcd.go](https://github.com/kubernetes/kubernetes/blob/release-1.8/test/e2e_node/services/etcd.go#L50-L55))
**Note that this field has been renamed to `embed.Config.LogOutputs` in `[]string` type in v3.4. Please see [v3.4 upgrade guide](https://github.com/etcd-io/etcd/blob/master/Documentation/upgrades/upgrade_3_4.md) for more details.**
**Note that `embed.Config.SetupLogging` method has been deprecated in v3.4. Please see [v3.4 upgrade guide](https://github.com/etcd-io/etcd/blob/master/Documentation/upgrades/upgrade_3_4.md) for more details.**
Note that in v3.3.0-rc.0, v3.3.0-rc.1, and v3.3.0-rc.2, `etcdhttp.Health` has boolean type `"health"` and `"errors"` fields. For backward compatibilities, we reverted `"health"` field to `string` type and removed `"errors"` field. Further health information will be provided in separate APIs.
3.3 now allows custom request size limits for both server and **client side**. In previous versions(v3.2.10, v3.2.11), client response size was limited to only 4 MiB.
err.Error() == "rpc error: code = ResourceExhausted desc = grpc: received message larger than max (5240509 vs. 3145728)"
```
**If not specified, client-side send limit defaults to 2 MiB (1.5 MiB + gRPC overhead bytes) and receive limit to `math.MaxInt32`**. Please see [clientv3 godoc](https://godoc.org/github.com/coreos/etcd/clientv3#Config) for more detail.
3.3 changes the function signatures of `clientv3` gRPC client wrapper. This change was needed to support [custom `grpc.CallOption` on message size limits](https://github.com/etcd-io/etcd/pull/9047).
Previously, clientv3 `Snapshot` API returned raw [`grpc/*status.statusError`] type error. v3.3 now translates those errors to corresponding public error types, to be consistent with other APIs.
Before
```go
import "context"
// reading snapshot with canceled context should error out
`clientv3` has deprecated `golang.org/x/net/context`. If a project vendors `golang.org/x/net/context` in other code (e.g. etcd generated protocol buffer code) and imports `github.com/coreos/etcd/clientv3`, it requires Go 1.9+ to compile.
`grpclog.Logger` has been deprecated in favor of [`grpclog.LoggerV2`](https://github.com/grpc/grpc-go/blob/master/grpclog/loggerv2.go). `clientv3.Logger` is now `grpclog.LoggerV2`.
Previously, `grpc.ErrClientConnTimeout` error is returned on client dial time-outs. 3.3 instead returns `context.DeadlineExceeded` (see [#8504](https://github.com/etcd-io/etcd/issues/8504)).
etcd now uses [`gcr.io/etcd-development/etcd`](https://gcr.io/etcd-development/etcd) as a primary container registry, and [`quay.io/coreos/etcd`](https://quay.io/coreos/etcd) as secondary.
[v3.3.14](https://github.com/etcd-io/etcd/releases/tag/v3.3.14) had to include some features from 3.4, while trying to minimize the difference between client balancer implementation. This release fixes ["kube-apiserver 1.13.x refuses to work when first etcd-server is not available" (kubernetes#72102)](https://github.com/kubernetes/kubernetes/issues/72102).
`grpc.ErrClientConnClosing` has been [deprecated in gRPC >= 1.10](https://github.com/grpc/grpc-go/pull/1854).
```diff
import (
+ "go.etcd.io/etcd/clientv3"
"google.golang.org/grpc"
+ "google.golang.org/grpc/codes"
+ "google.golang.org/grpc/status"
)
_, err := kvc.Get(ctx, "a")
-if err == grpc.ErrClientConnClosing {
+if clientv3.IsConnCanceled(err) {
// or
+s, ok := status.FromError(err)
+if ok {
+ if s.Code() == codes.Canceled
```
[The new client balancer](https://github.com/etcd-io/etcd/blob/master/Documentation/learning/design-client.md) uses an asynchronous resolver to pass endpoints to the gRPC dial function. As a result, [v3.3.14](https://github.com/etcd-io/etcd/releases/tag/v3.3.14) or later requires `grpc.WithBlock` dial option to wait until the underlying connection is up.
```diff
import (
"time"
"go.etcd.io/etcd/clientv3"
+ "google.golang.org/grpc"
)
+// "grpc.WithBlock()" to block until the underlying connection is up
To upgrade an existing etcd deployment to 3.3, the running cluster must be 3.2 or greater. If it's before 3.2, please [upgrade to 3.2](upgrade_3_2.md) before upgrading to 3.3.
Also, to ensure a smooth rolling upgrade, the running cluster must be healthy. Check the health of the cluster by using the `etcdctl endpoint health` command before proceeding.
#### Preparation
Before upgrading etcd, always test the services relying on etcd in a staging environment before deploying the upgrade to the production environment.
Before beginning, [backup the etcd data](../op-guide/maintenance.md#snapshot-backup). Should something go wrong with the upgrade, it is possible to use this backup to [downgrade](#downgrade) back to existing etcd version. Please note that the `snapshot` command only backs up the v3 data. For v2 data, see [backing up v2 datastore](../v2/admin_guide.md#backing-up-the-datastore).
#### Mixed versions
While upgrading, an etcd cluster supports mixed versions of etcd members, and operates with the protocol of the lowest common version. The cluster is only considered upgraded once all of its members are upgraded to version 3.3. Internally, etcd members negotiate with each other to determine the overall cluster version, which controls the reported version and the supported features.
#### Limitations
Note: If the cluster only has v3 data and no v2 data, it is not subject to this limitation.
If the cluster is serving a v2 data set larger than 50MB, each newly upgraded member may take up to two minutes to catch up with the existing cluster. Check the size of a recent snapshot to estimate the total data size. In other words, it is safest to wait for 2 minutes between upgrading each member.
For a much larger total data size, 100MB or more , this one-time process might take even more time. Administrators of very large etcd clusters of this magnitude can feel free to contact the [etcd team][etcd-contact] before upgrading, and we'll be happy to provide advice on the procedure.
#### Downgrade
If all members have been upgraded to v3.3, the cluster will be upgraded to v3.3, and downgrade from this completed state is **not possible**. If any single member is still v3.2, however, the cluster and its operations remains "v3.2", and it is possible from this mixed cluster state to return to using a v3.2 etcd binary on all members.
Please [backup the data directory](../op-guide/maintenance.md#snapshot-backup) of all etcd members to make downgrading the cluster possible even after it has been completely upgraded.
### Upgrade procedure
This example shows how to upgrade a 3-member v3.2 ectd cluster running on a local machine.
#### 1. Check upgrade requirements
Is the cluster healthy and running v3.2.x?
```
$ ETCDCTL_API=3 etcdctl endpoint health --endpoints=localhost:2379,localhost:22379,localhost:32379
localhost:2379 is healthy: successfully committed proposal: took = 6.600684ms
localhost:22379 is healthy: successfully committed proposal: took = 8.540064ms
localhost:32379 is healthy: successfully committed proposal: took = 8.763432ms
$ curl http://localhost:2379/version
{"etcdserver":"3.2.7","etcdcluster":"3.2.0"}
```
#### 2. Stop the existing etcd process
When each etcd process is stopped, expected errors will be logged by other cluster members. This is normal since a cluster member connection has been (temporarily) broken:
```
14:13:31.491746 I | raft: c89feb932daef420 [term 3] received MsgTimeoutNow from 6d4f535bae3ab960 and starts an election to get leadership.
14:13:31.491769 I | raft: c89feb932daef420 became candidate at term 4
14:13:31.491788 I | raft: c89feb932daef420 received MsgVoteResp from c89feb932daef420 at term 4
14:13:31.491797 I | raft: c89feb932daef420 [logterm: 3, index: 9] sent MsgVote request to 6d4f535bae3ab960 at term 4
14:13:31.491805 I | raft: c89feb932daef420 [logterm: 3, index: 9] sent MsgVote request to 9eda174c7df8a033 at term 4
14:13:31.491815 I | raft: raft.node: c89feb932daef420 lost leader 6d4f535bae3ab960 at term 4
14:13:31.524084 I | raft: c89feb932daef420 received MsgVoteResp from 6d4f535bae3ab960 at term 4
14:13:31.524108 I | raft: c89feb932daef420 [quorum:2] has received 2 MsgVoteResp votes and 0 vote rejections
14:13:31.524123 I | raft: c89feb932daef420 became leader at term 4
14:13:31.524136 I | raft: raft.node: c89feb932daef420 elected leader c89feb932daef420 at term 4
14:13:31.592650 W | rafthttp: lost the TCP streaming connection with peer 6d4f535bae3ab960 (stream MsgApp v2 reader)
14:13:31.592825 W | rafthttp: lost the TCP streaming connection with peer 6d4f535bae3ab960 (stream Message reader)
14:13:31.693275 E | rafthttp: failed to dial 6d4f535bae3ab960 on stream Message (dial tcp [::1]:2380: getsockopt: connection refused)
14:13:31.693289 I | rafthttp: peer 6d4f535bae3ab960 became inactive
14:13:31.936678 W | rafthttp: lost the TCP streaming connection with peer 6d4f535bae3ab960 (stream Message writer)
```
It's a good idea at this point to [backup the etcd data](../op-guide/maintenance.md#snapshot-backup) to provide a downgrade path should any problems occur:
```
$ etcdctl snapshot save backup.db
```
#### 3. Drop-in etcd v3.3 binary and start the new etcd process
The new v3.3 etcd will publish its information to the cluster:
```
14:14:25.363225 I | etcdserver: published {Name:s1 ClientURLs:[http://localhost:2379]} to cluster a9ededbffcb1b1f1
```
Verify that each member, and then the entire cluster, becomes healthy with the new v3.3 etcd binary:
```
$ ETCDCTL_API=3 /etcdctl endpoint health --endpoints=localhost:2379,localhost:22379,localhost:32379
localhost:22379 is healthy: successfully committed proposal: took = 5.540129ms
localhost:32379 is healthy: successfully committed proposal: took = 7.321771ms
localhost:2379 is healthy: successfully committed proposal: took = 10.629901ms
```
Upgraded members will log warnings like the following until the entire cluster is upgraded. This is expected and will cease after all etcd cluster members are upgraded to v3.3:
```
14:15:17.071804 W | etcdserver: member c89feb932daef420 has a higher version 3.3.0
14:15:21.073110 W | etcdserver: the local etcd version 3.2.7 is not up-to-date
14:15:21.073142 W | etcdserver: member 6d4f535bae3ab960 has a higher version 3.3.0
14:15:21.073157 W | etcdserver: the local etcd version 3.2.7 is not up-to-date
14:15:21.073164 W | etcdserver: member c89feb932daef420 has a higher version 3.3.0
```
#### 4. Repeat step 2 to step 3 for all other members
#### 5. Finish
When all members are upgraded, the cluster will report upgrading to 3.3 successfully:
```
14:15:54.536901 N | etcdserver/membership: updated the cluster version from 3.2 to 3.3
14:15:54.537035 I | etcdserver/api: enabled capabilities for version 3.3
```
```
$ ETCDCTL_API=3 /etcdctl endpoint health --endpoints=localhost:2379,localhost:22379,localhost:32379
localhost:2379 is healthy: successfully committed proposal: took = 2.312897ms
localhost:22379 is healthy: successfully committed proposal: took = 2.553476ms
localhost:32379 is healthy: successfully committed proposal: took = 2.517902ms