version: bump up to v3.0.17+git

Was triggering cancelation errors on outstanding KeepAlives if Grant
had to retry.

.devcontainer/devcontainer.json

@@ -1,23 +0,0 @@
-// For format details, see https://aka.ms/devcontainer.json. For config options, see the
-// README at: https://github.com/devcontainers/templates/tree/main/src/go
-{
-	"name": "Go",
-	
-	// Or use a Dockerfile or Docker Compose file. More info: https://containers.dev/guide/dockerfile
-	"image": "mcr.microsoft.com/devcontainers/go:1.19-bullseye",
-
-	// Features to add to the dev container. More info: https://containers.dev/features.
-	"features": {
-		  "ghcr.io/devcontainers/features/docker-in-docker:2": {},
-		  "ghcr.io/devcontainers/features/github-cli:1": {}
-	},
-
-	// Use 'forwardPorts' to make a list of ports inside the container available locally.
-	"forwardPorts": [2379, 2380],
-
-	// Use 'postCreateCommand' to run commands after the container is created.
-	"postCreateCommand": "make build"
-
-	// Configure tool-specific properties.
-	// "customizations": {},
-}

.dockerignore

@@ -0,0 +1 @@
+.git

.github/ISSUE_TEMPLATE.md

@@ -0,0 +1,8 @@
+# Bug reporting
+
+A good bug report has some very specific qualities, so please read over our short document on
+[reporting bugs][report_bugs] before you submit your bug report. 
+
+To ask a question, go ahead and ignore this.
+
+[report_bugs]: ../Documentation/reporting_bugs.md

.github/ISSUE_TEMPLATE/bug-report.yml

@@ -1,102 +0,0 @@
----
-name: Bug Report
-description: Report a bug encountered while operating etcd
-labels:
-  - type/bug
-body:
-  - type: checkboxes
-    id: confirmations
-    attributes:
-      label: Bug report criteria
-      description: Please confirm this bug report meets the following criteria.
-      options:
-        - label: This bug report is not security related, security issues should be disclosed privately via security@etcd.io.
-        - label: This is not a support request, support requests should be raised in the etcd [discussion forums](https://github.com/etcd-io/etcd/discussions).
-        - label: You have read the etcd [bug reporting guidelines](https://github.com/etcd-io/etcd/blob/main/Documentation/contributor-guide/reporting_bugs.md).
-        - label: Existing open issues along with etcd [frequently asked questions](https://etcd.io/docs/latest/faq) have been checked and this is not a duplicate.
-
-  - type: markdown
-    attributes:
-      value: |
-        Please fill the form below and provide as much information as possible.
-        Not doing so may result in your bug not being addressed in a timely manner.
-
-  - type: textarea
-    id: problem
-    attributes:
-      label: What happened?
-    validations:
-      required: true
-
-  - type: textarea
-    id: expected
-    attributes:
-      label: What did you expect to happen?
-    validations:
-      required: true
-
-  - type: textarea
-    id: repro
-    attributes:
-      label: How can we reproduce it (as minimally and precisely as possible)?
-    validations:
-      required: true
-
-  - type: textarea
-    id: additional
-    attributes:
-      label: Anything else we need to know?
-
-  - type: textarea
-    id: etcdVersion
-    attributes:
-      label: Etcd version (please run commands below)
-      value: |
-        <details>
-
-        ```console
-        $ etcd --version
-        # paste output here
-
-        $ etcdctl version
-        # paste output here
-        ```
-
-        </details>
-    validations:
-      required: true
-
-  - type: textarea
-    id: config
-    attributes:
-      label: Etcd configuration (command line flags or environment variables)
-      value: |
-        <details>
-
-        # paste your configuration here
-
-        </details>
-
-  - type: textarea
-    id: etcdDebugInformation
-    attributes:
-      label: Etcd debug information (please run commands below, feel free to obfuscate the IP address or FQDN in the output)
-      value: |
-        <details>
-
-        ```console
-        $ etcdctl member list -w table
-        # paste output here
-
-        $ etcdctl --endpoints=<member list> endpoint status -w table
-        # paste output here
-        ```
-
-        </details>
-
-  - type: textarea
-    id: logs
-    attributes:
-      label: Relevant log output
-      description: Please copy and paste any relevant log output. This will be automatically formatted into code, so no need for backticks.
-      render: Shell

.github/ISSUE_TEMPLATE/config.yml

@@ -1,6 +0,0 @@
----
-blank_issues_enabled: false
-contact_links:
-  - name: Question
-    url: https://github.com/etcd-io/etcd/discussions
-    about: Question relating to Etcd

.github/ISSUE_TEMPLATE/feature-request.yml

@@ -1,19 +0,0 @@
----
-name: Feature request
-description: Provide idea for a new feature
-labels:
-  - type/feature
-body:
-  - type: textarea
-    id: feature
-    attributes:
-      label: What would you like to be added?
-    validations:
-      required: true
-
-  - type: textarea
-    id: rationale
-    attributes:
-      label: Why is this needed?
-    validations:
-      required: true

.github/ISSUE_TEMPLATE/membership-request.yml

@@ -1,31 +0,0 @@
----
-name: Membership nomination
-description: Nominate new etcd members
-labels:
-  - area/community
-body:
-  - type: textarea
-    id: feature
-    attributes:
-      label: Who would you like to nominate?
-    validations:
-      required: true
-
-  - id: requirements
-    type: checkboxes
-    attributes:
-      label: Requirements
-      options:
-        - label: I have reviewed the [community membership guidelines](https://github.com/etcd-io/etcd/blob/main/Documentation/contributor-guide/community-membership.md)
-          required: true
-        - label: The members are actively contributing to 1 or more etcd subprojects
-          required: true
-        - label: The members are being sponsored by two current reviewers or a current maintainer.
-          required: true
-
-  - type: textarea
-    id: rationale
-    attributes:
-      label: How do the new members meet the regular active contribution requirements?
-    validations:
-      required: true

.github/ISSUE_TEMPLATE/test-flake.yml

@@ -1,34 +0,0 @@
----
-name: Flaking Test
-description: Report flaky tests
-labels:
-  - type/flake
-body:
-  - type: textarea
-    id: workflows
-    attributes:
-      label: Which github workflows are flaking?
-    validations:
-      required: true
-
-  - type: textarea
-    id: tests
-    attributes:
-      label: Which tests are flaking?
-    validations:
-      required: true
-
-  - type: input
-    id: link
-    attributes:
-      label: Github Action link
-
-  - type: textarea
-    id: reason
-    attributes:
-      label: Reason for failure (if possible)
-
-  - type: textarea
-    id: additional
-    attributes:
-      label: Anything else we need to know?

.github/PULL_REQUEST_TEMPLATE.md

@@ -1,2 +1,5 @@
+# Contributing guidelines
 
-Please read https://github.com/etcd-io/etcd/blob/main/CONTRIBUTING.md#contribution-flow.
+Please read our [contribution workflow][contributing] before submitting a pull request.
+
+[contributing]: ../CONTRIBUTING.md#contribution-flow

.github/SECURITY.md

@@ -1,2 +0,0 @@
-
-Please read https://github.com/etcd-io/etcd/blob/main/security/README.md.

.github/dependabot.yml

@@ -1,21 +0,0 @@
----
-version: 2
-updates:
-  - package-ecosystem: github-actions
-    directory: /
-    schedule:
-      interval: weekly
-
-  - package-ecosystem: gomod
-    directory: /
-    schedule:
-      interval: weekly
-    allow:
-      - dependency-type: all
-
-  - package-ecosystem: gomod
-    directory: /tools/mod # Not linked from /go.mod
-    schedule:
-      interval: weekly
-    allow:
-      - dependency-type: all

.github/stale.yml

@@ -1,56 +0,0 @@
----
-# Configuration for probot-stale - https://github.com/probot/stale
-
-# Number of days of inactivity before an Issue or Pull Request becomes stale
-daysUntilStale: 90
-
-# Number of days of inactivity before an Issue or Pull Request with the stale label is closed.
-# Set to false to disable. If disabled, issues still need to be closed manually, but will remain marked as stale.
-daysUntilClose: 21
-
-# Only issues or pull requests with all of these labels are check if stale. Defaults to `[]` (disabled)
-onlyLabels: []
-
-# Issues or Pull Requests with these labels will never be considered stale. Set to `[]` to disable
-exemptLabels:
-  - "stage/tracked"
-
-# Set to true to ignore issues in a project (defaults to false)
-exemptProjects: false
-
-# Set to true to ignore issues in a milestone (defaults to false)
-exemptMilestones: false
-
-# Set to true to ignore issues with an assignee (defaults to false)
-exemptAssignees: false
-
-# Label to use when marking as stale
-staleLabel: stale
-
-# Comment to post when marking as stale. Set to `false` to disable
-markComment: This issue has been automatically marked as stale because it has not had recent activity. It will be closed after 21 days if no further activity occurs. Thank you for your contributions.
-# Comment to post when removing the stale label.
-# unmarkComment: >
-#   Your comment here.
-
-# Comment to post when closing a stale Issue or Pull Request.
-# closeComment: >
-#   Your comment here.
-
-# Limit the number of actions per hour, from 1-30. Default is 30
-limitPerRun: 30
-
-# Limit to only `issues` or `pulls`
-# only: issues
-
-# Optionally, specify configuration settings that are specific to just 'issues' or 'pulls':
-# pulls:
-#   daysUntilStale: 30
-#   markComment: >
-#     This pull request has been automatically marked as stale because it has not had
-#     recent activity. It will be closed if no further activity occurs. Thank you
-#     for your contributions.
-
-# issues:
-#   exemptLabels:
-#     - confirmed

.github/workflows/build.yaml

@@ -1,67 +0,0 @@
----
-name: Build
-on: [push, pull_request]
-permissions: read-all
-
-jobs:
-  build:
-    runs-on: ubuntu-latest
-    strategy:
-      fail-fast: false
-      matrix:
-        target:
-          - linux-amd64
-          - linux-386
-          - darwin-amd64
-          - darwin-arm64
-          - windows-amd64
-          - linux-arm
-          - linux-arm64
-          - linux-ppc64le
-          - linux-s390x
-    steps:
-      - uses: actions/checkout@c85c95e3d7251135ab7dc9ce3241c5835cc595a9 # v3.5.3
-      - id: goversion
-        run: echo "goversion=$(cat .go-version)" >> "$GITHUB_OUTPUT"
-      - uses: actions/setup-go@fac708d6674e30b6ba41289acaab6d4b75aa0753 # v4.0.1
-        with:
-          go-version: ${{ steps.goversion.outputs.goversion }}
-      - env:
-          TARGET: ${{ matrix.target }}
-        run: |
-          set -euo pipefail
-
-          echo "${TARGET}"
-          case "${TARGET}" in
-            linux-amd64)
-              GOOS=linux GOARCH=amd64 make build
-              ;;
-            linux-386)
-              GOOS=linux GOARCH=386 make build
-              ;;
-            darwin-amd64)
-              GOOS=darwin GOARCH=amd64 make build
-              ;;
-            darwin-arm64)
-              GOOS=darwin GOARCH=arm64 make build
-              ;;
-            windows-amd64)
-              GOOS=windows GOARCH=amd64 make build
-              ;;
-            linux-arm)
-              GOOS=linux GOARCH=arm make build
-              ;;
-            linux-arm64)
-              GOOS=linux GOARCH=arm64 make build
-              ;;
-            linux-ppc64le)
-              GOOS=linux GOARCH=ppc64le make build
-              ;;
-            linux-s390x)
-              GOOS=linux GOARCH=s390x make build
-              ;;
-            *)
-              echo "Failed to find target"
-              exit 1
-              ;;
-          esac

.github/workflows/codeql-analysis.yml

@@ -1,55 +0,0 @@
----
-# For most projects, this workflow file will not need changing; you simply need
-# to commit it to your repository.
-#
-# You may wish to alter this file to override the set of languages analyzed,
-# or to provide custom queries or build logic.
-#
-# ******** NOTE ********
-# We have attempted to detect the languages in your repository. Please check
-# the `language` matrix defined below to confirm you have the correct set of
-# supported CodeQL languages.
-#
-name: "CodeQL"
-on:
-  push:
-    branches: [main, release-3.4, release-3.5, release-3.6]
-  pull_request:
-    # The branches below must be a subset of the branches above
-    branches: [main]
-  schedule:
-    - cron: '20 14 * * 5'
-permissions: read-all
-jobs:
-  analyze:
-    name: Analyze
-    runs-on: ubuntu-latest
-    permissions:
-      actions: read
-      contents: read
-      security-events: write
-    strategy:
-      fail-fast: false
-      matrix:
-        # CodeQL supports [ 'cpp', 'csharp', 'go', 'java', 'javascript', 'python' ]
-        # Learn more:
-        # https://docs.github.com/en/free-pro-team@latest/github/finding-security-vulnerabilities-and-errors-in-your-code/configuring-code-scanning#changing-the-languages-that-are-analyzed
-        language: ['go']
-    steps:
-      - name: Checkout repository
-        uses: actions/checkout@c85c95e3d7251135ab7dc9ce3241c5835cc595a9 # v3.5.3
-      # Initializes the CodeQL tools for scanning.
-      - name: Initialize CodeQL
-        uses: github/codeql-action/init@6c089f53dd51dc3fc7e599c3cb5356453a52ca9e # v2.20.0
-        with:
-          # If you wish to specify custom queries, you can do so here or in a config file.
-          # By default, queries listed here will override any specified in a config file.
-          # Prefix the list here with "+" to use these queries and those in the config file.
-          # queries: ./path/to/local/query, your-org/your-repo/queries@main
-          languages: ${{ matrix.language }}
-      # Autobuild attempts to build any compiled languages  (C/C++, C#, or Java).
-      # If this step fails, then you should remove it and run the build manually (see below)
-      - name: Autobuild
-        uses: github/codeql-action/autobuild@6c089f53dd51dc3fc7e599c3cb5356453a52ca9e # v2.20.0
-      - name: Perform CodeQL Analysis
-        uses: github/codeql-action/analyze@6c089f53dd51dc3fc7e599c3cb5356453a52ca9e # v2.20.0

.github/workflows/contrib.yaml

@@ -1,18 +0,0 @@
----
-name: Test contrib/mixin
-on: [push, pull_request]
-permissions: read-all
-jobs:
-  test:
-    runs-on: ubuntu-latest
-    steps:
-      - uses: actions/checkout@c85c95e3d7251135ab7dc9ce3241c5835cc595a9 # v3.5.3
-      - id: goversion
-        run: echo "goversion=$(cat .go-version)" >> "$GITHUB_OUTPUT"
-      - uses: actions/setup-go@fac708d6674e30b6ba41289acaab6d4b75aa0753 # v4.0.1
-        with:
-          go-version: ${{ steps.goversion.outputs.goversion }}
-      - run: |
-          set -euo pipefail
-
-          make -C contrib/mixin tools test

.github/workflows/coverage.yaml

@@ -1,32 +0,0 @@
----
-name: Coverage
-on: [push]
-permissions: read-all
-jobs:
-  coverage:
-    runs-on: ubuntu-latest
-    strategy:
-      fail-fast: false
-      matrix:
-        target:
-          - linux-amd64-coverage
-    steps:
-      - uses: actions/checkout@c85c95e3d7251135ab7dc9ce3241c5835cc595a9 # v3.5.3
-      - id: goversion
-        run: echo "goversion=$(cat .go-version)" >> "$GITHUB_OUTPUT"
-      - uses: actions/setup-go@fac708d6674e30b6ba41289acaab6d4b75aa0753 # v4.0.1
-        with:
-          go-version: ${{ steps.goversion.outputs.goversion }}
-      - env:
-          TARGET: ${{ matrix.target }}
-        run: |
-          mkdir "${TARGET}"
-          case "${TARGET}" in
-            linux-amd64-coverage)
-              GOARCH=amd64 ./scripts/codecov_upload.sh
-              ;;
-            *)
-              echo "Failed to find target"
-              exit 1
-              ;;
-          esac

.github/workflows/e2e-arm64.yaml

@@ -1,45 +0,0 @@
----
-name: E2E-arm64
-on:
-  schedule:
-    - cron: '0 1 * * *' # runs daily at 1am.
-permissions: read-all
-jobs:
-  test:
-    # this is to prevent the job to run at forked projects
-    if: github.repository == 'etcd-io/etcd'
-    runs-on: [self-hosted, Linux, ARM64]
-    container: golang:1.19-bullseye
-    defaults:
-      run:
-        shell: bash
-    strategy:
-      fail-fast: true
-      matrix:
-        target:
-          - linux-arm64-e2e
-    steps:
-      - uses: actions/checkout@c85c95e3d7251135ab7dc9ce3241c5835cc595a9 # v3.5.3
-      # https://github.com/actions/checkout/issues/1169
-      - run: git config --system --add safe.directory '*'
-      - id: goversion
-        run: echo "goversion=$(cat .go-version)" >> "$GITHUB_OUTPUT"
-      - uses: actions/setup-go@fac708d6674e30b6ba41289acaab6d4b75aa0753 # v4.0.1
-        with:
-          go-version: ${{ steps.goversion.outputs.goversion }}
-      - env:
-          TARGET: ${{ matrix.target }}
-        run: |
-          set -euo pipefail
-          go clean -testcache
-
-          echo "${TARGET}"
-          case "${TARGET}" in
-            linux-arm64-e2e)
-              GOOS=linux GOARCH=arm64 CPU=4 EXPECT_DEBUG=true RACE=true make test-e2e-release
-              ;;
-            *)
-              echo "Failed to find target"
-              exit 1
-              ;;
-          esac

.github/workflows/e2e.yaml

@@ -1,39 +0,0 @@
----
-name: E2E
-on: [push, pull_request]
-permissions: read-all
-jobs:
-  test:
-    runs-on: ubuntu-latest
-    strategy:
-      fail-fast: true
-      matrix:
-        target:
-          - linux-amd64-e2e
-          - linux-386-e2e
-    steps:
-      - uses: actions/checkout@c85c95e3d7251135ab7dc9ce3241c5835cc595a9 # v3.5.3
-      - id: goversion
-        run: echo "goversion=$(cat .go-version)" >> "$GITHUB_OUTPUT"
-      - uses: actions/setup-go@fac708d6674e30b6ba41289acaab6d4b75aa0753 # v4.0.1
-        with:
-          go-version: ${{ steps.goversion.outputs.goversion }}
-      - env:
-          TARGET: ${{ matrix.target }}
-        run: |
-          set -euo pipefail
-          go clean -testcache
-
-          echo "${TARGET}"
-          case "${TARGET}" in
-            linux-amd64-e2e)
-              VERBOSE=1 GOOS=linux GOARCH=amd64 CPU=4 EXPECT_DEBUG=true RACE=true make test-e2e-release
-              ;;
-            linux-386-e2e)
-              VERBOSE=1 GOOS=linux GOARCH=386 CPU=4 EXPECT_DEBUG=true RACE=true make test-e2e
-              ;;
-            *)
-              echo "Failed to find target"
-              exit 1
-              ;;
-          esac

.github/workflows/fuzzing.yaml

@@ -1,26 +0,0 @@
----
-name: Fuzzing v3rpc
-on: [push, pull_request]
-permissions: read-all
-jobs:
-  fuzzing:
-    runs-on: ubuntu-latest
-    strategy:
-      fail-fast: false
-    env:
-      TARGET_PATH: ./server/etcdserver/api/v3rpc
-    steps:
-      - uses: actions/checkout@c85c95e3d7251135ab7dc9ce3241c5835cc595a9 # v3.5.3
-      - id: goversion
-        run: echo "goversion=$(cat .go-version)" >> "$GITHUB_OUTPUT"
-      - uses: actions/setup-go@fac708d6674e30b6ba41289acaab6d4b75aa0753 # v4.0.1
-        with:
-          go-version: ${{ steps.goversion.outputs.goversion }}
-      - run: |
-          set -euo pipefail
-
-          GOARCH=amd64 CPU=4 make fuzz
-      - uses: actions/upload-artifact@0b7f8abb1508181956e8e162db84b466c27e18ce # v3.1.2
-        if: failure()
-        with:
-          path: "${{env.TARGET_PATH}}/testdata/fuzz/**/*"

.github/workflows/govuln.yaml

@@ -1,19 +0,0 @@
----
-name: Go Vulnerability Checker
-on: [push, pull_request]
-permissions: read-all
-jobs:
-  test:
-    runs-on: ubuntu-latest
-    steps:
-      - uses: actions/checkout@c85c95e3d7251135ab7dc9ce3241c5835cc595a9 # v3.5.3
-      - id: goversion
-        run: echo "goversion=$(cat .go-version)" >> "$GITHUB_OUTPUT"
-      - uses: actions/setup-go@fac708d6674e30b6ba41289acaab6d4b75aa0753 # v4.0.1
-        with:
-          go-version: ${{ steps.goversion.outputs.goversion }}
-      - run: date
-      - run: |
-          set -euo pipefail
-
-          go install golang.org/x/vuln/cmd/govulncheck@latest && govulncheck ./...

.github/workflows/grpcproxy.yaml

@@ -1,38 +0,0 @@
----
-name: grpcProxy-tests
-on: [push, pull_request]
-permissions: read-all
-jobs:
-  test:
-    runs-on: ubuntu-latest
-    strategy:
-      fail-fast: true
-      matrix:
-        target:
-          - linux-amd64-grpcproxy-integration
-          - linux-amd64-grpcproxy-e2e
-    steps:
-      - uses: actions/checkout@c85c95e3d7251135ab7dc9ce3241c5835cc595a9 # v3.5.3
-      - id: goversion
-        run: echo "goversion=$(cat .go-version)" >> "$GITHUB_OUTPUT"
-      - uses: actions/setup-go@fac708d6674e30b6ba41289acaab6d4b75aa0753 # v4.0.1
-        with:
-          go-version: ${{ steps.goversion.outputs.goversion }}
-      - env:
-          TARGET: ${{ matrix.target }}
-        run: |
-          set -euo pipefail
-
-          echo "${TARGET}"
-          case "${TARGET}" in
-            linux-amd64-grpcproxy-integration)
-              GOOS=linux GOARCH=amd64 CPU=4 RACE=true make test-grpcproxy-integration
-              ;;
-            linux-amd64-grpcproxy-e2e)
-              GOOS=linux GOARCH=amd64 CPU=4 RACE=true make test-grpcproxy-e2e
-              ;;
-            *)
-              echo "Failed to find target"
-              exit 1
-              ;;
-          esac

.github/workflows/measure-test-flakiness.yaml

@@ -1,23 +0,0 @@
----
-name: Measure Test Flakiness
-
-on:
-  schedule:
-    - cron: "0 0 * * 0" # run every Sunday at midnight
-
-permissions: read-all
-
-jobs:
-  measure-test-flakiness:
-    name: Measure Test Flakiness
-    runs-on: ubuntu-latest
-    steps:
-      - uses: actions/checkout@c85c95e3d7251135ab7dc9ce3241c5835cc595a9 # v3.5.3
-      - env:
-          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
-        run: |
-          set -euo pipefail
-
-          ./scripts/measure-test-flakiness.sh
-          make bin/etcd-test-analyzer
-          bin/etcd-test-analyzer run -token $GITHUB_TOKEN -max-age=168h -workflow Tests -branch main

.github/workflows/release.yaml

@@ -1,34 +0,0 @@
----
-name: Release
-on: [push, pull_request]
-permissions: read-all
-jobs:
-  main:
-    runs-on: ubuntu-latest
-    steps:
-      - uses: actions/checkout@c85c95e3d7251135ab7dc9ce3241c5835cc595a9 # v3.5.3
-      - id: goversion
-        run: echo "goversion=$(cat .go-version)" >> "$GITHUB_OUTPUT"
-      - uses: actions/setup-go@fac708d6674e30b6ba41289acaab6d4b75aa0753 # v4.0.1
-        with:
-          go-version: ${{ steps.goversion.outputs.goversion }}
-      - name: release
-        run: |
-          set -euo pipefail
-
-          git config --global user.email "github-action@etcd.io"
-          git config --global user.name "Github Action"
-          gpg --batch --gen-key <<EOF
-          %no-protection
-          Key-Type: 1
-          Key-Length: 2048
-          Subkey-Type: 1
-          Subkey-Length: 2048
-          Name-Real: Github Action
-          Name-Email: github-action@etcd.io
-          Expire-Date: 0
-          EOF
-          DRY_RUN=true ./scripts/release.sh --no-upload --no-docker-push --in-place 3.6.99
-      - name: test-image
-        run: |
-          VERSION=3.6.99 ./scripts/test_images.sh

.github/workflows/robustness-nightly.yaml

@@ -1,39 +0,0 @@
----
-name: Robustness Nightly
-permissions: read-all
-on:
-  # schedules always run against the main branch, hence we have to create separate jobs
-  # with individual checkout actions for each of the active release branches
-  schedule:
-    - cron: '25 9 * * *' # runs every day at 09:25 UTC
-jobs:
-  main:
-    # GHA has a maximum amount of 6h execution time, we try to get done within 3h
-    uses: ./.github/workflows/robustness-template.yaml
-    with:
-      etcdBranch: main
-      count: 100
-      testTimeout: 200m
-      artifactName: main
-  main-arm64:
-    uses: ./.github/workflows/robustness-template-arm64.yaml
-    with:
-      etcdBranch: main
-      count: 100
-      testTimeout: 200m
-      artifactName: main-arm64
-      runs-on: "['self-hosted', 'Linux', 'ARM64']"
-  release-35:
-    uses: ./.github/workflows/robustness-template.yaml
-    with:
-      etcdBranch: release-3.5
-      count: 100
-      testTimeout: 200m
-      artifactName: release-35
-  release-34:
-    uses: ./.github/workflows/robustness-template.yaml
-    with:
-      etcdBranch: release-3.4
-      count: 100
-      testTimeout: 200m
-      artifactName: release-34

.github/workflows/robustness-template-arm64.yaml

@@ -1,72 +0,0 @@
----
-name: Reusable Robustness Workflow
-on:
-  workflow_call:
-    inputs:
-      etcdBranch:
-        required: true
-        type: string
-      count:
-        required: true
-        type: number
-      testTimeout:
-        required: false
-        type: string
-        default: '30m'
-      artifactName:
-        required: true
-        type: string
-      runs-on:
-        required: false
-        type: string
-        default: "['ubuntu-latest']"
-permissions: read-all
-
-jobs:
-  test:
-    timeout-minutes: 210
-    runs-on: ${{ fromJson(inputs.runs-on) }}
-    container: golang:1.19-bullseye
-    defaults:
-      run:
-        shell: bash
-    steps:
-      - uses: actions/checkout@c85c95e3d7251135ab7dc9ce3241c5835cc595a9 # v3.5.3
-      # https://github.com/actions/checkout/issues/1169
-      - run: git config --system --add safe.directory '*'
-      - id: goversion
-        run: echo "goversion=$(cat .go-version)" >> "$GITHUB_OUTPUT"
-      - uses: actions/setup-go@fac708d6674e30b6ba41289acaab6d4b75aa0753 # v4.0.1
-        with:
-          go-version: ${{ steps.goversion.outputs.goversion }}
-      - name: test-robustness
-        env:
-          ETCD_BRANCH: "${{ inputs.etcdBranch }}"
-        run: |
-          set -euo pipefail
-          go clean -testcache
-
-          # Use --failfast to avoid overriding report generated by failed test
-          GO_TEST_FLAGS="-v --count ${{ inputs.count }} --timeout ${{ inputs.testTimeout }} --failfast --run TestRobustness"
-          case "${ETCD_BRANCH}" in
-            release-3.5)
-              EXPECT_DEBUG=true GO_TEST_FLAGS=${GO_TEST_FLAGS} RESULTS_DIR=/tmp/results make test-robustness-release-3.5
-              ;;
-            release-3.4)
-              EXPECT_DEBUG=true GO_TEST_FLAGS=${GO_TEST_FLAGS} RESULTS_DIR=/tmp/results make test-robustness-release-3.4
-              ;;
-            main)
-              make gofail-enable
-              make build
-              EXPECT_DEBUG=true GO_TEST_FLAGS=${GO_TEST_FLAGS} RESULTS_DIR=/tmp/results make test-robustness
-              ;;
-            *)
-              echo "Failed to find target ${ETCD_BRANCH}"
-              exit 1
-              ;;
-          esac
-      - uses: actions/upload-artifact@0b7f8abb1508181956e8e162db84b466c27e18ce
-        if: always()
-        with:
-          name: ${{ inputs.artifactName }}
-          path: /tmp/results/*

.github/workflows/robustness-template.yaml

@@ -1,65 +0,0 @@
----
-name: Reusable Robustness Workflow
-on:
-  workflow_call:
-    inputs:
-      etcdBranch:
-        required: true
-        type: string
-      count:
-        required: true
-        type: number
-      testTimeout:
-        required: false
-        type: string
-        default: '30m'
-      artifactName:
-        required: true
-        type: string
-      runs-on:
-        required: false
-        type: string
-        default: "['ubuntu-latest']"
-permissions: read-all
-jobs:
-  test:
-    timeout-minutes: 210
-    runs-on: ${{ fromJson(inputs.runs-on) }}
-    steps:
-      - uses: actions/checkout@c85c95e3d7251135ab7dc9ce3241c5835cc595a9 # v3.5.3
-      - id: goversion
-        run: echo "goversion=$(cat .go-version)" >> "$GITHUB_OUTPUT"
-      - uses: actions/setup-go@fac708d6674e30b6ba41289acaab6d4b75aa0753 # v4.0.1
-        with:
-          go-version: ${{ steps.goversion.outputs.goversion }}
-      - name: test-robustness
-        env:
-          ETCD_BRANCH: "${{ inputs.etcdBranch }}"
-        run: |
-          set -euo pipefail
-          go clean -testcache
-
-          # Use --failfast to avoid overriding report generated by failed test
-          GO_TEST_FLAGS="-v --count ${{ inputs.count }} --timeout ${{ inputs.testTimeout }} --failfast --run TestRobustness"
-          case "${ETCD_BRANCH}" in
-            release-3.5)
-              EXPECT_DEBUG=true GO_TEST_FLAGS=${GO_TEST_FLAGS} RESULTS_DIR=/tmp/results make test-robustness-release-3.5
-              ;;
-            release-3.4)
-              EXPECT_DEBUG=true GO_TEST_FLAGS=${GO_TEST_FLAGS} RESULTS_DIR=/tmp/results make test-robustness-release-3.4
-              ;;
-            main)
-              make gofail-enable
-              make build
-              EXPECT_DEBUG=true GO_TEST_FLAGS=${GO_TEST_FLAGS} RESULTS_DIR=/tmp/results make test-robustness
-              ;;
-            *)
-              echo "Failed to find target ${ETCD_BRANCH}"
-              exit 1
-              ;;
-          esac
-      - uses: actions/upload-artifact@0b7f8abb1508181956e8e162db84b466c27e18ce
-        if: always()
-        with:
-          name: ${{ inputs.artifactName }}
-          path: /tmp/results/*

.github/workflows/robustness.yaml

@@ -1,12 +0,0 @@
----
-name: Robustness
-on: [push, pull_request]
-permissions: read-all
-jobs:
-  main:
-    uses: ./.github/workflows/robustness-template.yaml
-    with:
-      etcdBranch: main
-      count: 15
-      testTimeout: 30m
-      artifactName: main

.github/workflows/scorecards.yml

@@ -1,55 +0,0 @@
----
-name: Scorecards supply-chain security
-on:
-  # Only the default branch is supported.
-  branch_protection_rule:
-  schedule:
-    - cron: '45 1 * * 0'
-  push:
-    branches: ["main"]
-
-# Declare default permissions as read only.
-permissions: read-all
-
-jobs:
-  analysis:
-    name: Scorecards analysis
-    runs-on: ubuntu-latest
-    permissions:
-      # Needed to upload the results to code-scanning dashboard.
-      security-events: write
-      # Used to receive a badge.
-      id-token: write
-
-    steps:
-      - name: "Checkout code"
-        uses: actions/checkout@c85c95e3d7251135ab7dc9ce3241c5835cc595a9 # tag=v3.0.0
-        with:
-          persist-credentials: false
-
-      - name: "Run analysis"
-        uses: ossf/scorecard-action@80e868c13c90f172d68d1f4501dee99e2479f7af # tag=v2.1.3
-        with:
-          results_file: results.sarif
-          results_format: sarif
-
-          # Publish the results for public repositories to enable scorecard badges. For more details, see
-          # https://github.com/ossf/scorecard-action#publishing-results.
-          # For private repositories, `publish_results` will automatically be set to `false`, regardless
-          # of the value entered here.
-          publish_results: true
-
-      # Upload the results as artifacts (optional). Commenting out will disable uploads of run results in SARIF
-      # format to the repository Actions tab.
-      - name: "Upload artifact"
-        uses: actions/upload-artifact@0b7f8abb1508181956e8e162db84b466c27e18ce # tag=v3.0.0
-        with:
-          name: SARIF file
-          path: results.sarif
-          retention-days: 5
-
-      # Upload the results to GitHub's code scanning dashboard.
-      - name: "Upload to code-scanning"
-        uses: github/codeql-action/upload-sarif@6c089f53dd51dc3fc7e599c3cb5356453a52ca9e # tag=v1.0.26
-        with:
-          sarif_file: results.sarif

.github/workflows/static-analysis.yaml

@@ -1,32 +0,0 @@
----
-name: Static Analysis
-on: [push, pull_request]
-permissions: read-all
-jobs:
-  run:
-    runs-on: ubuntu-latest
-    steps:
-      - uses: actions/checkout@c85c95e3d7251135ab7dc9ce3241c5835cc595a9 # v3.5.3
-      - id: goversion
-        run: echo "goversion=$(cat .go-version)" >> "$GITHUB_OUTPUT"
-      - uses: actions/setup-go@fac708d6674e30b6ba41289acaab6d4b75aa0753 # v4.0.1
-        with:
-          go-version: ${{ steps.goversion.outputs.goversion }}
-      - name: golangci-lint
-        uses: golangci/golangci-lint-action@639cd343e1d3b897ff35927a75193d57cfcba299 # v3.6.0
-        with:
-          version: v1.49.0
-          args: --config tools/.golangci.yaml
-      - name: protoc
-        uses: arduino/setup-protoc@149f6c87b92550901b26acd1632e11c3662e381f # v1.3.0
-        with:
-          version: '3.14.0'
-          repo-token: ${{ secrets.GITHUB_TOKEN }}
-      - run: |
-          set -euo pipefail
-
-          make verify
-      - run: |
-          set -euo pipefail
-
-          make fix

.github/workflows/tests-arm64.yaml

@@ -1,62 +0,0 @@
----
-name: Tests-arm64
-on:
-  schedule:
-    - cron: '30 1 * * *' # runs daily at 1:30 am.
-permissions: read-all
-jobs:
-  test:
-    # this is to prevent the job to run at forked projects
-    if: github.repository == 'etcd-io/etcd'
-    runs-on: [self-hosted, Linux, ARM64]
-    container: golang:1.19-bullseye
-    defaults:
-      run:
-        shell: bash
-    strategy:
-      fail-fast: false
-      matrix:
-        target:
-          - linux-arm64-integration-1-cpu
-          - linux-arm64-integration-2-cpu
-          - linux-arm64-integration-4-cpu
-          - linux-arm64-unit-4-cpu-race
-    steps:
-      - uses: actions/checkout@c85c95e3d7251135ab7dc9ce3241c5835cc595a9 # v3.5.3
-      # https://github.com/actions/checkout/issues/1169
-      - run: git config --system --add safe.directory '*'
-      - id: goversion
-        run: echo "goversion=$(cat .go-version)" >> "$GITHUB_OUTPUT"
-      - uses: actions/setup-go@fac708d6674e30b6ba41289acaab6d4b75aa0753 # v4.0.1
-        with:
-          go-version: ${{ steps.goversion.outputs.goversion }}
-      - env:
-          TARGET: ${{ matrix.target }}
-        run: |
-          set -euo pipefail
-          go clean -testcache
-
-          mkdir "${TARGET}"
-          export JUNIT_REPORT_DIR=$(realpath ${TARGET})
-          case "${TARGET}" in
-            linux-arm64-integration-1-cpu)
-              GOOS=linux GOARCH=arm64 CPU=1 make test-integration
-              ;;
-            linux-arm64-integration-2-cpu)
-              GOOS=linux GOARCH=arm64 CPU=2 make test-integration
-              ;;
-            linux-arm64-integration-4-cpu)
-              GOOS=linux GOARCH=arm64 CPU=4 make test-integration
-              ;;
-            linux-arm64-unit-4-cpu-race)
-              GOOS=linux GOARCH=arm64 CPU=4 RACE=true GO_TEST_FLAGS='-p=2' make test-unit
-              ;;
-            *)
-              echo "Failed to find target"
-              exit 1
-              ;;
-          esac
-      - uses: actions/upload-artifact@0b7f8abb1508181956e8e162db84b466c27e18ce # v3.1.2
-        if: always()
-        with:
-          path: ./**/junit_*.xml

.github/workflows/tests.yaml

@@ -1,56 +0,0 @@
----
-name: Tests
-on: [push, pull_request]
-permissions: read-all
-jobs:
-  test:
-    runs-on: ubuntu-latest
-    strategy:
-      fail-fast: false
-      matrix:
-        target:
-          - linux-amd64-integration-1-cpu
-          - linux-amd64-integration-2-cpu
-          - linux-amd64-integration-4-cpu
-          - linux-amd64-unit-4-cpu-race
-          - linux-386-unit-1-cpu
-    steps:
-      - uses: actions/checkout@c85c95e3d7251135ab7dc9ce3241c5835cc595a9 # v3.5.3
-      - id: goversion
-        run: echo "goversion=$(cat .go-version)" >> "$GITHUB_OUTPUT"
-      - uses: actions/setup-go@fac708d6674e30b6ba41289acaab6d4b75aa0753 # v4.0.1
-        with:
-          go-version: ${{ steps.goversion.outputs.goversion }}
-      - env:
-          TARGET: ${{ matrix.target }}
-        run: |
-          set -euo pipefail
-          go clean -testcache
-
-          mkdir "${TARGET}"
-          export JUNIT_REPORT_DIR=$(realpath ${TARGET})
-          case "${TARGET}" in
-            linux-amd64-integration-1-cpu)
-              GOOS=linux GOARCH=amd64 CPU=1 make test-integration
-              ;;
-            linux-amd64-integration-2-cpu)
-              GOOS=linux GOARCH=amd64 CPU=2 make test-integration
-              ;;
-            linux-amd64-integration-4-cpu)
-              GOOS=linux GOARCH=amd64 CPU=4 make test-integration
-              ;;
-            linux-amd64-unit-4-cpu-race)
-              GOOS=linux GOARCH=amd64 CPU=4 RACE=true GO_TEST_FLAGS='-p=2' make test-unit
-              ;;
-            linux-386-unit-1-cpu)
-              GOOS=linux GOARCH=386 CPU=1 GO_TEST_FLAGS='-p=4' make test-unit
-              ;;
-            *)
-              echo "Failed to find target"
-              exit 1
-              ;;
-          esac
-      - uses: actions/upload-artifact@0b7f8abb1508181956e8e162db84b466c27e18ce # v3.1.2
-        if: always()
-        with:
-          path: ./**/junit_*.xml

.gitignore

@@ -1,37 +1,13 @@
-/agent-*
 /coverage
-/covdir
 /gopath
-/gopath.proto
-/release
+/go-bindata
+/machine*
 /bin
+.vagrant
 *.etcd
-*.log
-*.swp
 /etcd
+*.swp
 /hack/insta-discovery/.env
-*.coverprofile
 *.test
+tools/functional-tester/docker/bin
 hack/tls-setup/certs
-.idea
-*.iml
-/contrib/mixin/manifests
-/contrib/raftexample/raftexample
-/contrib/raftexample/raftexample-*
-/vendor
-/tests/e2e/default.proxy
-*.tmp
-*.bak
-.gobincache/
-.DS_Store
-/Documentation/dev-guide/api_reference_v3.md
-/Documentation/dev-guide/api_concurrency_reference_v3.md
-
-/tools/etcd-dump-db/etcd-dump-db
-/tools/etcd-dump-logs/etcd-dump-logs
-/tools/etcd-dump-metrics/etcd-dump-metrics
-/tools/local-tester/bridge/bridge
-/tools/proto-annotations/proto-annotations
-/tools/benchmark/benchmark
-/out
-/etcd-dump-logs

.go-version

@@ -1 +0,0 @@
-1.19.10

.godir

@@ -0,0 +1 @@
+github.com/coreos/etcd

.travis.yml

@@ -0,0 +1,54 @@
+dist: trusty
+language: go
+go_import_path: github.com/coreos/etcd
+sudo: false
+
+go:
+  - 1.6.4
+
+env:
+  global:
+   - GO15VENDOREXPERIMENT=1
+  matrix:
+   - TARGET=amd64
+   - TARGET=arm64
+   - TARGET=arm
+   - TARGET=ppc64le
+
+matrix:
+  fast_finish: true
+  allow_failures:
+    - go: tip
+  exclude:
+  - go: 1.6
+    env: TARGET=arm64
+  - go: tip
+    env: TARGET=arm
+  - go: tip
+    env: TARGET=arm64
+  - go: tip
+    env: TARGET=ppc64le
+
+addons:
+  apt:
+    packages:
+    - libpcap-dev
+    - libaspell-dev
+    - libhunspell-dev
+
+before_install:
+ - go get -v github.com/chzchzchz/goword
+ - go get -v honnef.co/go/simple/cmd/gosimple
+ - go get -v honnef.co/go/unused/cmd/unused
+
+# disable godep restore override
+install:
+ - pushd cmd/ && go get -t -v ./... && popd
+
+script:
+ - >
+    if [ "${TARGET}" == "amd64" ]; then
+      GOARCH="${TARGET}" ./test;
+    else
+      GOARCH="${TARGET}" ./build;
+    fi

ADOPTERS.md

@@ -1,250 +0,0 @@
----
-title: Production users
----
-
-This document tracks people and use cases for etcd in production. By creating a list of production use cases we hope to build a community of advisors that we can reach out to with experience using various etcd applications, operation environments, and cluster sizes. The etcd development team may reach out periodically to check-in on how etcd is working in the field and update this list.
-
-## All Kubernetes Users
-
-- *Application*: https://kubernetes.io/
-- *Environments*: AWS, OpenStack, Azure, Google Cloud, Huawei Cloud, Bare Metal, etc
-
-**This is a meta user; please feel free to document specific Kubernetes clusters!**
-
-All Kubernetes clusters use etcd as their primary data store. This means etcd's users include such companies as [Niantic, Inc Pokemon Go](https://cloudplatform.googleblog.com/2016/09/bringing-Pokemon-GO-to-life-on-Google-Cloud.html), [Box](https://blog.box.com/blog/kubernetes-box-microservices-maximum-velocity/), [CoreOS](https://coreos.com/tectonic), [Ticketmaster](https://www.youtube.com/watch?v=wqXVKneP0Hg), [Salesforce](https://www.salesforce.com) and many many more.
-
-## discovery.etcd.io
-
-- *Application*: https://github.com/coreos/discovery.etcd.io
-- *Launched*: Feb. 2014
-- *Cluster Size*: 5 members, 5 discovery proxies
-- *Order of Data Size*: 100s of Megabytes
-- *Operator*: CoreOS, brandon.philips@coreos.com
-- *Environment*: AWS
-- *Backups*: Periodic async to S3
-
-discovery.etcd.io is the longest continuously running etcd backed service that we know about. It is the basis of automatic cluster bootstrap and was launched in Feb. 2014: https://coreos.com/blog/etcd-0.3.0-released/.
-
-## OpenTable
-
-- *Application*: OpenTable internal service discovery and cluster configuration management
-- *Launched*: May 2014
-- *Cluster Size*: 3 members each in 6 independent clusters; approximately 50 nodes reading / writing
-- *Order of Data Size*: 10s of MB
-- *Operator*: OpenTable, Inc; sschlansker@opentable.com
-- *Environment*: AWS, VMWare
-- *Backups*: None, all data can be re-created if necessary.
-
-## cycoresys.com
-
-- *Application*: multiple
-- *Launched*: Jul. 2014
-- *Cluster Size*: 3 members, _n_ proxies
-- *Order of Data Size*: 100s of kilobytes
-- *Operator*: CyCore Systems, Inc, sys@cycoresys.com
-- *Environment*: Baremetal
-- *Backups*: Periodic sync to Ceph RadosGW and DigitalOcean VM
-
-CyCore Systems provides architecture and engineering for computing systems.  This cluster provides microservices, virtual machines, databases, storage clusters to a number of clients.  It is built on CoreOS machines, with each machine in the cluster running etcd as a peer or proxy.
-
-## Radius Intelligence
-
-- *Application*: multiple internal tools, Kubernetes clusters, bootstrappable system configs
-- *Launched*: June 2015
-- *Cluster Size*: 2 clusters of 5 and 3 members; approximately a dozen nodes read/write
-- *Order of Data Size*: 100s of kilobytes
-- *Operator*: Radius Intelligence; jcderr@radius.com
-- *Environment*: AWS, CoreOS, Kubernetes
-- *Backups*: None, all data can be recreated if necessary.
-
-Radius Intelligence uses Kubernetes running CoreOS to containerize and scale internal toolsets. Examples include running [JetBrains TeamCity][teamcity] and internal AWS security and cost reporting tools. etcd clusters back these clusters as well as provide some basic environment bootstrapping configuration keys.
-
-## Vonage
-
-- *Application*: kubernetes, vault backend, system configuration for microservices, scheduling, locks (future - service discovery)
-- *Launched*: August 2015
-- *Cluster Size*: 2 clusters of 5 members in 2 DCs, n local proxies 1-to-1 with microservice, (ssl and SRV look up)
-- *Order of Data Size*: kilobytes
-- *Operator*: Vonage [devAdmin][raoofm]
-- *Environment*: VMWare, AWS
-- *Backups*: Daily snapshots on VMs. Backups done for upgrades.
-
-## PD
-
-- *Application*: embed etcd
-- *Launched*: Mar 2016
-- *Cluster Size*: 3 or 5 members
-- *Order of Data Size*: megabytes
-- *Operator*: PingCAP, Inc.
-- *Environment*: Bare Metal, AWS, etc.
-- *Backups*: None.
-
-PD(Placement Driver) is the central controller in the TiDB cluster. It saves the cluster meta information, schedule the data, allocate the global unique timestamp for the distributed transaction, etc. It embeds etcd to supply high availability and auto failover.
-
-## Huawei
-
-- *Application*: System configuration for overlay network (Canal)
-- *Launched*: June 2016
-- *Cluster Size*: 3 members for each cluster
-- *Order of Data Size*: kilobytes
-- *Operator*: Huawei Euler Department
-- *Environment*: [Huawei Cloud](http://www.hwclouds.com/product/cce.html)
-- *Backups*: None, all data can be recreated if necessary.
-
-[teamcity]: https://www.jetbrains.com/teamcity/
-[raoofm]:https://github.com/raoofm
-
-## Qiniu Cloud
-
-- *Application*: system configuration for microservices, distributed locks
-- *Launched*: Jan. 2016
-- *Cluster Size*: 3 members each with several clusters
-- *Order of Data Size*: kilobytes
-- *Operator*: Pandora, chenchao@qiniu.com
-- *Environment*: Baremetal
-- *Backups*: None, all data can be recreated if necessary
-
-## QingCloud
-
-- *Application*: [QingCloud][qingcloud] appcenter cluster for service discovery as [metad][metad] backend.
-- *Launched*: December 2016
-- *Cluster Size*: 1 cluster of 3 members per user.
-- *Order of Data Size*: kilobytes
-- *Operator*: [yunify][yunify]
-- *Environment*: QingCloud IaaS
-- *Backups*: None, all data can be recreated if necessary.
-
-[metad]:https://github.com/yunify/metad
-[yunify]:https://github.com/yunify
-[qingcloud]:https://qingcloud.com/
-
-
-## Yandex
-
-- *Application*: system configuration for services, service discovery
-- *Launched*: March 2016
-- *Cluster Size*: 3 clusters of 5 members
-- *Order of Data Size*: several gigabytes
-- *Operator*: Yandex; [nekto0n][nekto0n]
-- *Environment*: Bare Metal
-- *Backups*: None
-
-[nekto0n]:https://github.com/nekto0n
-
-## Tencent Games
-
-- *Application*: Meta data and configuration data for service discovery, Kubernetes, etc.
-- *Launched*: Jan. 2015
-- *Cluster Size*: 3 members each with 10s of clusters
-- *Order of Data Size*: 10s of Megabytes
-- *Operator*: Tencent Game Operations Department
-- *Environment*: Baremetal
-- *Backups*: Periodic sync to backup server
-
-In Tencent games, we use Docker and Kubernetes to deploy and run our applications, and use etcd to save meta data for service discovery, Kubernetes, etc.
-
-## Hyper.sh
-
-- *Application*: Kubernetes, distributed locks, etc.
-- *Launched*: April 2016
-- *Cluster Size*: 1 cluster of 3 members
-- *Order of Data Size*: 10s of MB
-- *Operator*: Hyper.sh
-- *Environment*: Baremetal
-- *Backups*: None, all data can be recreated if necessary.
-
-In [hyper.sh][hyper.sh], the container service is backed by [hypernetes][hypernetes], a multi-tenant kubernetes distro. Moreover, we use etcd to coordinate the multiple manage services and store global meta data.
-
-[hypernetes]:https://github.com/hyperhq/hypernetes
-[Hyper.sh]:https://www.hyper.sh
-
-## Meitu
-- *Application*: system configuration for services, service discovery, kubernetes in test environment
-- *Launched*: October 2015
-- *Cluster Size*: 1 cluster of 3 members
-- *Order of Data Size*: megabytes
-- *Operator*: Meitu, hxj@meitu.com, [shafreeck][shafreeck]
-- *Environment*: Bare Metal
-- *Backups*: None, all data can be recreated if necessary.
-
-[shafreeck]:https://github.com/shafreeck
-
-## Grab
-- *Application*: system configuration for services, service discovery
-- *Launched*: June 2016
-- *Cluster Size*: 1 cluster of 7 members
-- *Order of Data Size*: megabytes
-- *Operator*: Grab, [taxitan][taxitan], [reterVision][reterVision]
-- *Environment*: AWS
-- *Backups*: None, all data can be recreated if necessary.
-
-[taxitan]:https://github.com/taxitan
-[reterVision]:https://github.com/reterVision
-
-## DaoCloud.io
-
-- *Application*: container management
-- *Launched*: Sep. 2015
-- *Cluster Size*: 1000+ deployments, each deployment contains a 3 node cluster.
-- *Order of Data Size*: 100s of Megabytes
-- *Operator*: daocloud.io
-- *Environment*: Baremetal and virtual machines
-- *Backups*: None, all data can be recreated if necessary.
-
-In [DaoCloud][DaoCloud], we use Docker and Swarm to deploy and run our applications, and we use etcd to save metadata for service discovery.
-
-[DaoCloud]:https://www.daocloud.io
-
-## Branch.io
-
-- *Application*: Kubernetes
-- *Launched*: April 2016
-- *Cluster Size*: Multiple clusters, multiple sizes
-- *Order of Data Size*: 100s of Megabytes
-- *Operator*: branch.io
-- *Environment*: AWS, Kubernetes
-- *Backups*: EBS volume backups
-
-At [Branch][branch], we use kubernetes heavily as our core microservice platform for staging and production.
-
-[branch]: https://branch.io
-
-## Baidu Waimai
-
-- *Application*: SkyDNS, Kubernetes, UDC, CMDB and other distributed systems
-- *Launched*: April. 2016
-- *Cluster Size*: 3 clusters of 5 members
-- *Order of Data Size*: several gigabytes
-- *Operator*: Baidu Waimai Operations Department
-- *Environment*: CentOS 6.5
-- *Backups*: backup scripts
-
-## Salesforce.com
-
-- *Application*: Kubernetes
-- *Launched*: Jan 2017
-- *Cluster Size*: Multiple clusters of 3 members
-- *Order of Data Size*: 100s of Megabytes
-- *Operator*: Salesforce.com (krmayankk@github)
-- *Environment*: BareMetal
-- *Backups*: None, all data can be recreated
-
-## Hosted Graphite
-
-- *Application*: Service discovery, locking, ephemeral application data
-- *Launched*: January 2017
-- *Cluster Size*: 2 clusters of 7 members
-- *Order of Data Size*: Megabytes
-- *Operator*: Hosted Graphite (sre@hostedgraphite.com)
-- *Environment*: Bare Metal
-- *Backups*: None, all data is considered ephemeral.
-
-## Transwarp
-
-- *Application*: Transwarp Data Cloud, Transwarp Operating System, Transwarp Data Hub, Sophon
-- *Launched*: January 2016
-- *Cluster Size*: Multiple clusters, multiple sizes
-- *Order of Data Size*: Megabytes
-- *Operator*: Trasnwarp Operating System
-- *Environment*: Bare Metal, Container
-- *Backups*: backup scripts

CHANGELOG/CHANGELOG-2.3.md

@@ -1,16 +0,0 @@
-
-
-<hr>
-
-
-## [v2.3.8](https://github.com/etcd-io/etcd/releases/tag/v2.3.8) (2017-02-17)
-
-See [code changes](https://github.com/etcd-io/etcd/compare/v2.3.7...v2.3.8).
-
-### Go
-
-- Compile with [*Go 1.7.5*](https://golang.org/doc/devel/release.html#go1.7).
-
-
-<hr>
-

CHANGELOG/CHANGELOG-3.0.md

@@ -1,291 +0,0 @@
-
-
-<hr>
-
-
-## [v3.0.16](https://github.com/etcd-io/etcd/releases/tag/v3.0.16) (2016-11-13)
-
-See [code changes](https://github.com/etcd-io/etcd/compare/v3.0.15...v3.0.16) and [v3.0 upgrade guide](https://etcd.io/docs/latest/upgrades/upgrade_3_0/) for any breaking changes.
-
-**Again, before running upgrades from any previous release, please make sure to read change logs below and [v3.0 upgrade guide](https://etcd.io/docs/latest/upgrades/upgrade_3_0/).**
-
-### Go
-
-- Compile with [*Go 1.6.4*](https://golang.org/doc/devel/release.html#go1.6).
-
-
-<hr>
-
-
-## [v3.0.15](https://github.com/etcd-io/etcd/releases/tag/v3.0.15) (2016-11-11)
-
-See [code changes](https://github.com/etcd-io/etcd/compare/v3.0.14...v3.0.15) and [v3.0 upgrade guide](https://etcd.io/docs/latest/upgrades/upgrade_3_0/) for any breaking changes.
-
-**Again, before running upgrades from any previous release, please make sure to read change logs below and [v3.0 upgrade guide](https://etcd.io/docs/latest/upgrades/upgrade_3_0/).**
-
-### Fixed
-
-- Fix cancel watch request with wrong range end.
-
-### Go
-
-- Compile with [*Go 1.6.3*](https://golang.org/doc/devel/release.html#go1.6).
-
-
-<hr>
-
-
-## [v3.0.14](https://github.com/etcd-io/etcd/releases/tag/v3.0.14) (2016-11-04)
-
-See [code changes](https://github.com/etcd-io/etcd/compare/v3.0.13...v3.0.14) and [v3.0 upgrade guide](https://etcd.io/docs/latest/upgrades/upgrade_3_0/) for any breaking changes.
-
-**Again, before running upgrades from any previous release, please make sure to read change logs below and [v3.0 upgrade guide](https://etcd.io/docs/latest/upgrades/upgrade_3_0/).**
-
-### Added
-
-- v3 `etcdctl migrate` command now supports `--no-ttl` flag to discard keys on transform.
-
-### Go
-
-- Compile with [*Go 1.6.3*](https://golang.org/doc/devel/release.html#go1.6).
-
-
-<hr>
-
-
-## [v3.0.13](https://github.com/etcd-io/etcd/releases/tag/v3.0.13) (2016-10-24)
-
-See [code changes](https://github.com/etcd-io/etcd/compare/v3.0.12...v3.0.13) and [v3.0 upgrade guide](https://etcd.io/docs/latest/upgrades/upgrade_3_0/) for any breaking changes.
-
-**Again, before running upgrades from any previous release, please make sure to read change logs below and [v3.0 upgrade guide](https://etcd.io/docs/latest/upgrades/upgrade_3_0/).**
-
-### Go
-
-- Compile with [*Go 1.6.3*](https://golang.org/doc/devel/release.html#go1.6).
-
-
-<hr>
-
-
-## [v3.0.12](https://github.com/etcd-io/etcd/releases/tag/v3.0.12) (2016-10-07)
-
-See [code changes](https://github.com/etcd-io/etcd/compare/v3.0.11...v3.0.12) and [v3.0 upgrade guide](https://etcd.io/docs/latest/upgrades/upgrade_3_0/) for any breaking changes.
-
-**Again, before running upgrades from any previous release, please make sure to read change logs below and [v3.0 upgrade guide](https://etcd.io/docs/latest/upgrades/upgrade_3_0/).**
-
-### Go
-
-- Compile with [*Go 1.6.3*](https://golang.org/doc/devel/release.html#go1.6).
-
-
-<hr>
-
-
-## [v3.0.11](https://github.com/etcd-io/etcd/releases/tag/v3.0.11) (2016-10-07)
-
-See [code changes](https://github.com/etcd-io/etcd/compare/v3.0.10...v3.0.11) and [v3.0 upgrade guide](https://etcd.io/docs/latest/upgrades/upgrade_3_0/) for any breaking changes.
-
-**Again, before running upgrades from any previous release, please make sure to read change logs below and [v3.0 upgrade guide](https://etcd.io/docs/latest/upgrades/upgrade_3_0/).**
-
-### Added
-
-- Server returns previous key-value (optional)
-  - `clientv3.WithPrevKV` option
-  - v3 etcdctl `put,watch,del --prev-kv` flag
-
-### Go
-
-- Compile with [*Go 1.6.3*](https://golang.org/doc/devel/release.html#go1.6).
-
-
-<hr>
-
-
-## [v3.0.10](https://github.com/etcd-io/etcd/releases/tag/v3.0.10) (2016-09-23)
-
-See [code changes](https://github.com/etcd-io/etcd/compare/v3.0.9...v3.0.10) and [v3.0 upgrade guide](https://etcd.io/docs/latest/upgrades/upgrade_3_0/) for any breaking changes.
-
-**Again, before running upgrades from any previous release, please make sure to read change logs below and [v3.0 upgrade guide](https://etcd.io/docs/latest/upgrades/upgrade_3_0/).**
-
-### Go
-
-- Compile with [*Go 1.6.3*](https://golang.org/doc/devel/release.html#go1.6).
-
-
-<hr>
-
-
-## [v3.0.9](https://github.com/etcd-io/etcd/releases/tag/v3.0.9) (2016-09-15)
-
-See [code changes](https://github.com/etcd-io/etcd/compare/v3.0.8...v3.0.9) and [v3.0 upgrade guide](https://etcd.io/docs/latest/upgrades/upgrade_3_0/) for any breaking changes.
-
-**Again, before running upgrades from any previous release, please make sure to read change logs below and [v3.0 upgrade guide](https://etcd.io/docs/latest/upgrades/upgrade_3_0/).**
-
-### Added
-
-- Warn on domain names on listen URLs (v3.2 will reject domain names).
-
-### Go
-
-- Compile with [*Go 1.6.3*](https://golang.org/doc/devel/release.html#go1.6).
-
-
-<hr>
-
-
-## [v3.0.8](https://github.com/etcd-io/etcd/releases/tag/v3.0.8) (2016-09-09)
-
-See [code changes](https://github.com/etcd-io/etcd/compare/v3.0.7...v3.0.8) and [v3.0 upgrade guide](https://etcd.io/docs/latest/upgrades/upgrade_3_0/) for any breaking changes.
-
-**Again, before running upgrades from any previous release, please make sure to read change logs below and [v3.0 upgrade guide](https://etcd.io/docs/latest/upgrades/upgrade_3_0/).**
-
-### Other
-
-- Allow only IP addresses in listen URLs (domain names are rejected).
-
-### Go
-
-- Compile with [*Go 1.6.3*](https://golang.org/doc/devel/release.html#go1.6).
-
-
-<hr>
-
-
-## [v3.0.7](https://github.com/etcd-io/etcd/releases/tag/v3.0.7) (2016-08-31)
-
-See [code changes](https://github.com/etcd-io/etcd/compare/v3.0.6...v3.0.7) and [v3.0 upgrade guide](https://etcd.io/docs/latest/upgrades/upgrade_3_0/) for any breaking changes.
-
-**Again, before running upgrades from any previous release, please make sure to read change logs below and [v3.0 upgrade guide](https://etcd.io/docs/latest/upgrades/upgrade_3_0/).**
-
-### Other
-
-- SRV records only allow A records (RFC 2052).
-
-### Go
-
-- Compile with [*Go 1.6.3*](https://golang.org/doc/devel/release.html#go1.6).
-
-
-<hr>
-
-
-## [v3.0.6](https://github.com/etcd-io/etcd/releases/tag/v3.0.6) (2016-08-19)
-
-See [code changes](https://github.com/etcd-io/etcd/compare/v3.0.5...v3.0.6) and [v3.0 upgrade guide](https://etcd.io/docs/latest/upgrades/upgrade_3_0/) for any breaking changes.
-
-**Again, before running upgrades from any previous release, please make sure to read change logs below and [v3.0 upgrade guide](https://etcd.io/docs/latest/upgrades/upgrade_3_0/).**
-
-### Go
-
-- Compile with [*Go 1.6.3*](https://golang.org/doc/devel/release.html#go1.6).
-
-
-<hr>
-
-
-## [v3.0.5](https://github.com/etcd-io/etcd/releases/tag/v3.0.5) (2016-08-19)
-
-See [code changes](https://github.com/etcd-io/etcd/compare/v3.0.4...v3.0.5) and [v3.0 upgrade guide](https://etcd.io/docs/latest/upgrades/upgrade_3_0/) for any breaking changes.
-
-**Again, before running upgrades from any previous release, please make sure to read change logs below and [v3.0 upgrade guide](https://etcd.io/docs/latest/upgrades/upgrade_3_0/).**
-
-### Other
-
-- SRV records (e.g., infra1.example.com) must match the discovery domain (i.e., example.com) if no custom certificate authority is given.
-
-### Go
-
-- Compile with [*Go 1.6.3*](https://golang.org/doc/devel/release.html#go1.6).
-
-
-<hr>
-
-
-## [v3.0.4](https://github.com/etcd-io/etcd/releases/tag/v3.0.4) (2016-07-27)
-
-See [code changes](https://github.com/etcd-io/etcd/compare/v3.0.3...v3.0.4) and [v3.0 upgrade guide](https://etcd.io/docs/latest/upgrades/upgrade_3_0/) for any breaking changes.
-
-**Again, before running upgrades from any previous release, please make sure to read change logs below and [v3.0 upgrade guide](https://etcd.io/docs/latest/upgrades/upgrade_3_0/).**
-
-### Added
-
-- v2 `etcdctl ls` command now supports `--output=json`.
-- Add /var/lib/etcd directory to etcd official Docker image.
-
-### Other
-
-- v2 auth can now use common name from TLS certificate when `--client-cert-auth` is enabled.
-
-### Go
-
-- Compile with [*Go 1.6.3*](https://golang.org/doc/devel/release.html#go1.6).
-
-
-<hr>
-
-
-## [v3.0.3](https://github.com/etcd-io/etcd/releases/tag/v3.0.3) (2016-07-15)
-
-See [code changes](https://github.com/etcd-io/etcd/compare/v3.0.2...v3.0.3) and [v3.0 upgrade guide](https://etcd.io/docs/latest/upgrades/upgrade_3_0/) for any breaking changes.
-
-**Again, before running upgrades from any previous release, please make sure to read change logs below and [v3.0 upgrade guide](https://etcd.io/docs/latest/upgrades/upgrade_3_0/).**
-
-### Other
-
-- Revert Dockerfile to use `CMD`, instead of `ENTRYPOINT`, to support `etcdctl` run.
-  - Docker commands for v3.0.2 won't work without specifying executable binary paths.
-- v3 etcdctl default endpoints are now `127.0.0.1:2379`.
-
-### Go
-
-- Compile with [*Go 1.6.2*](https://golang.org/doc/devel/release.html#go1.6).
-
-
-<hr>
-
-
-## [v3.0.2](https://github.com/etcd-io/etcd/releases/tag/v3.0.2) (2016-07-08)
-
-See [code changes](https://github.com/etcd-io/etcd/compare/v3.0.1...v3.0.2) and [v3.0 upgrade guide](https://etcd.io/docs/latest/upgrades/upgrade_3_0/) for any breaking changes.
-
-**Again, before running upgrades from any previous release, please make sure to read change logs below and [v3.0 upgrade guide](https://etcd.io/docs/latest/upgrades/upgrade_3_0/).**
-
-### Other
-
-- Dockerfile uses `ENTRYPOINT`, instead of `CMD`, to run etcd without binary path specified.
-
-### Go
-
-- Compile with [*Go 1.6.2*](https://golang.org/doc/devel/release.html#go1.6).
-
-
-<hr>
-
-
-## [v3.0.1](https://github.com/etcd-io/etcd/releases/tag/v3.0.1) (2016-07-01)
-
-See [code changes](https://github.com/etcd-io/etcd/compare/v3.0.0...v3.0.1) and [v3.0 upgrade guide](https://etcd.io/docs/latest/upgrades/upgrade_3_0/) for any breaking changes.
-
-**Again, before running upgrades from any previous release, please make sure to read change logs below and [v3.0 upgrade guide](https://etcd.io/docs/latest/upgrades/upgrade_3_0/).**
-
-### Go
-
-- Compile with [*Go 1.6.2*](https://golang.org/doc/devel/release.html#go1.6).
-
-
-<hr>
-
-
-## [v3.0.0](https://github.com/etcd-io/etcd/releases/tag/v3.0.0) (2016-06-30)
-
-See [code changes](https://github.com/etcd-io/etcd/compare/v2.3.0...v3.0.0) and [v3.0 upgrade guide](https://etcd.io/docs/latest/upgrades/upgrade_3_0/) for any breaking changes.
-
-**Again, before running upgrades from any previous release, please make sure to read change logs below and [v3.0 upgrade guide](https://etcd.io/docs/latest/upgrades/upgrade_3_0/).**
-
-### Go
-
-- Compile with [*Go 1.6.2*](https://golang.org/doc/devel/release.html#go1.6).
-
-
-<hr>
-

CHANGELOG/CHANGELOG-3.1.md

@@ -1,574 +0,0 @@
-
-
-Previous change logs can be found at [CHANGELOG-3.0](https://github.com/etcd-io/etcd/blob/main/CHANGELOG/CHANGELOG-3.0.md).
-
-<hr>
-
-## [v3.1.21](https://github.com/etcd-io/etcd/releases/tag/v3.1.21) (2019-TBD)
-
-### etcdctl v3
-
-- [Strip out insecure endpoints from DNS SRV records when using discovery](https://github.com/etcd-io/etcd/pull/10443) with etcdctl v2
-- Add [`etcdctl endpoint health --write-out` support](https://github.com/etcd-io/etcd/pull/9540).
-  - Previously, [`etcdctl endpoint health --write-out json` did not work](https://github.com/etcd-io/etcd/issues/9532).
-  - The command output is changed. Previously, if endpoint is unreachable, the command output is
-  "\<endpoint\> is unhealthy: failed to connect: \<error message\>". This change unified the error message, all error types
-  now have the same output "\<endpoint\> is unhealthy: failed to commit proposal: \<error message\>".
-
-### Metrics, Monitoring
-
-See [List of metrics](https://github.com/etcd-io/etcd/tree/main/Documentation/metrics) for all metrics per release.
-
-Note that any `etcd_debugging_*` metrics are experimental and subject to change.
-
-- Fix bug where [db_compaction_total_duration_milliseconds metric incorrectly measured duration as 0](https://github.com/etcd-io/etcd/pull/10646).
-
-<hr>
-
-## [v3.1.20](https://github.com/etcd-io/etcd/releases/tag/v3.1.20) (2018-10-10)
-
-See [code changes](https://github.com/etcd-io/etcd/compare/v3.1.19...v3.1.20) and [v3.1 upgrade guide](https://etcd.io/docs/latest/upgrades/upgrade_3_1/) for any breaking changes.
-
-**Again, before running upgrades from any previous release, please make sure to read change logs below and [v3.1 upgrade guide](https://etcd.io/docs/latest/upgrades/upgrade_3_1/).**
-
-### Improved
-
-- Improve ["became inactive" warning log](https://github.com/etcd-io/etcd/pull/10024), which indicates message send to a peer failed.
-- Improve [read index wait timeout warning log](https://github.com/etcd-io/etcd/pull/10026), which indicates that local node might have slow network.
-- Add [gRPC interceptor for debugging logs](https://github.com/etcd-io/etcd/pull/9990); enable `etcd --debug` flag to see per-request debug information.
-- Add [consistency check in snapshot status](https://github.com/etcd-io/etcd/pull/10109). If consistency check on snapshot file fails, `snapshot status` returns `"snapshot file integrity check failed..."` error.
-
-### Metrics, Monitoring
-
-See [List of metrics](https://github.com/etcd-io/etcd/tree/main/Documentation/metrics) for all metrics per release.
-
-Note that any `etcd_debugging_*` metrics are experimental and subject to change.
-
-- Improve [`etcd_network_peer_round_trip_time_seconds`](https://github.com/etcd-io/etcd/pull/10155) Prometheus metric to track leader heartbeats.
-  - Previously, it only samples the TCP connection for snapshot messages.
-- Display all registered [gRPC metrics at start](https://github.com/etcd-io/etcd/pull/10034).
-- Add [`etcd_snap_db_fsync_duration_seconds_count`](https://github.com/etcd-io/etcd/pull/9997) Prometheus metric.
-- Add [`etcd_snap_db_save_total_duration_seconds_bucket`](https://github.com/etcd-io/etcd/pull/9997) Prometheus metric.
-- Add [`etcd_network_snapshot_send_success`](https://github.com/etcd-io/etcd/pull/9997) Prometheus metric.
-- Add [`etcd_network_snapshot_send_failures`](https://github.com/etcd-io/etcd/pull/9997) Prometheus metric.
-- Add [`etcd_network_snapshot_send_total_duration_seconds`](https://github.com/etcd-io/etcd/pull/9997) Prometheus metric.
-- Add [`etcd_network_snapshot_receive_success`](https://github.com/etcd-io/etcd/pull/9997) Prometheus metric.
-- Add [`etcd_network_snapshot_receive_failures`](https://github.com/etcd-io/etcd/pull/9997) Prometheus metric.
-- Add [`etcd_network_snapshot_receive_total_duration_seconds`](https://github.com/etcd-io/etcd/pull/9997) Prometheus metric.
-- Add [`etcd_server_id`](https://github.com/etcd-io/etcd/pull/9998) Prometheus metric.
-- Add [`etcd_server_health_success`](https://github.com/etcd-io/etcd/pull/10156) Prometheus metric.
-- Add [`etcd_server_health_failures`](https://github.com/etcd-io/etcd/pull/10156) Prometheus metric.
-- Add [`etcd_server_read_indexes_failed_total`](https://github.com/etcd-io/etcd/pull/10094) Prometheus metric.
-
-### client v3
-
-- Fix logic on [release lock key if cancelled](https://github.com/etcd-io/etcd/pull/10153) in `clientv3/concurrency` package.
-
-### Go
-
-- Compile with [*Go 1.8.7*](https://golang.org/doc/devel/release.html#go1.8).
-
-
-<hr>
-
-
-## [v3.1.19](https://github.com/etcd-io/etcd/releases/tag/v3.1.19) (2018-07-24)
-
-See [code changes](https://github.com/etcd-io/etcd/compare/v3.1.18...v3.1.19) and [v3.1 upgrade guide](https://etcd.io/docs/latest/upgrades/upgrade_3_1/) for any breaking changes.
-
-**Again, before running upgrades from any previous release, please make sure to read change logs below and [v3.1 upgrade guide](https://etcd.io/docs/latest/upgrades/upgrade_3_1/).**
-
-### Improved
-
-- Improve [Raft Read Index timeout warning messages](https://github.com/etcd-io/etcd/pull/9897).
-
-### Metrics, Monitoring
-
-See [List of metrics](https://github.com/etcd-io/etcd/tree/main/Documentation/metrics) for all metrics per release.
-
-Note that any `etcd_debugging_*` metrics are experimental and subject to change.
-
-- Add [`etcd_server_go_version`](https://github.com/etcd-io/etcd/pull/9957) Prometheus metric.
-- Add [`etcd_server_slow_read_indexes_total`](https://github.com/etcd-io/etcd/pull/9897) Prometheus metric.
-- Add [`etcd_server_quota_backend_bytes`](https://github.com/etcd-io/etcd/pull/9820) Prometheus metric.
-  - Use it with `etcd_mvcc_db_total_size_in_bytes` and `etcd_mvcc_db_total_size_in_use_in_bytes`.
-  - `etcd_server_quota_backend_bytes 2.147483648e+09` means current quota size is 2 GB.
-  - `etcd_mvcc_db_total_size_in_bytes 20480` means current physically allocated DB size is 20 KB.
-  - `etcd_mvcc_db_total_size_in_use_in_bytes 16384` means future DB size if defragment operation is complete.
-  - `etcd_mvcc_db_total_size_in_bytes - etcd_mvcc_db_total_size_in_use_in_bytes` is the number of bytes that can be saved on disk with defragment operation.
-- Add [`etcd_mvcc_db_total_size_in_bytes`](https://github.com/etcd-io/etcd/pull/9819) Prometheus metric.
-  - In addition to [`etcd_debugging_mvcc_db_total_size_in_bytes`](https://github.com/etcd-io/etcd/pull/9819).
-- Add [`etcd_mvcc_db_total_size_in_use_in_bytes`](https://github.com/etcd-io/etcd/pull/9256) Prometheus metric.
-  - Use it with `etcd_mvcc_db_total_size_in_bytes` and `etcd_mvcc_db_total_size_in_use_in_bytes`.
-  - `etcd_server_quota_backend_bytes 2.147483648e+09` means current quota size is 2 GB.
-  - `etcd_mvcc_db_total_size_in_bytes 20480` means current physically allocated DB size is 20 KB.
-  - `etcd_mvcc_db_total_size_in_use_in_bytes 16384` means future DB size if defragment operation is complete.
-  - `etcd_mvcc_db_total_size_in_bytes - etcd_mvcc_db_total_size_in_use_in_bytes` is the number of bytes that can be saved on disk with defragment operation.
-
-### client v3
-
-- Fix [lease keepalive interval updates when response queue is full](https://github.com/etcd-io/etcd/pull/9952).
-  - If `<-chan *clientv3LeaseKeepAliveResponse` from `clientv3.Lease.KeepAlive` was never consumed or channel is full, client was [sending keepalive request every 500ms](https://github.com/etcd-io/etcd/issues/9911) instead of expected rate of every "TTL / 3" duration.
-
-### Go
-
-- Compile with [*Go 1.8.7*](https://golang.org/doc/devel/release.html#go1.8).
-
-
-<hr>
-
-
-## [v3.1.18](https://github.com/etcd-io/etcd/releases/tag/v3.1.18) (2018-06-15)
-
-See [code changes](https://github.com/etcd-io/etcd/compare/v3.1.17...v3.1.18) and [v3.1 upgrade guide](https://etcd.io/docs/latest/upgrades/upgrade_3_1/) for any breaking changes.
-
-**Again, before running upgrades from any previous release, please make sure to read change logs below and [v3.1 upgrade guide](https://etcd.io/docs/latest/upgrades/upgrade_3_1/).**
-
-### Metrics, Monitoring
-
-See [List of metrics](https://github.com/etcd-io/etcd/tree/main/Documentation/metrics) for all metrics per release.
-
-Note that any `etcd_debugging_*` metrics are experimental and subject to change.
-
-- Add [`etcd_server_version`](https://github.com/etcd-io/etcd/pull/8960) Prometheus metric.
-  - To replace [Kubernetes `etcd-version-monitor`](https://github.com/etcd-io/etcd/issues/8948).
-
-### Go
-
-- Compile with [*Go 1.8.7*](https://golang.org/doc/devel/release.html#go1.8).
-
-
-<hr>
-
-
-## [v3.1.17](https://github.com/etcd-io/etcd/releases/tag/v3.1.17) (2018-06-06)
-
-See [code changes](https://github.com/etcd-io/etcd/compare/v3.1.16...v3.1.17) and [v3.1 upgrade guide](https://etcd.io/docs/latest/upgrades/upgrade_3_1/) for any breaking changes.
-
-**Again, before running upgrades from any previous release, please make sure to read change logs below and [v3.1 upgrade guide](https://etcd.io/docs/latest/upgrades/upgrade_3_1/).**
-
-### etcd server
-
-- Fix [v3 snapshot recovery](https://github.com/etcd-io/etcd/issues/7628).
-  - A follower receives a leader snapshot to be persisted as a `[SNAPSHOT-INDEX].snap.db` file on disk.
-  - Now, server [ensures that the incoming snapshot be persisted on disk before loading it](https://github.com/etcd-io/etcd/pull/7876).
-  - Otherwise, index mismatch happens and triggers server-side panic (e.g. newer WAL entry with outdated snapshot index).
-
-### Go
-
-- Compile with [*Go 1.8.7*](https://golang.org/doc/devel/release.html#go1.8).
-
-
-<hr>
-
-
-## [v3.1.16](https://github.com/etcd-io/etcd/releases/tag/v3.1.16) (2018-05-31)
-
-See [code changes](https://github.com/etcd-io/etcd/compare/v3.1.15...v3.1.16) and [v3.1 upgrade guide](https://etcd.io/docs/latest/upgrades/upgrade_3_1/) for any breaking changes.
-
-**Again, before running upgrades from any previous release, please make sure to read change logs below and [v3.1 upgrade guide](https://etcd.io/docs/latest/upgrades/upgrade_3_1/).**
-
-### etcd server
-
-- Fix [`mvcc` server panic from restore operation](https://github.com/etcd-io/etcd/pull/9775).
-  - Let's assume that a watcher had been requested with a future revision X and sent to node A that became network-partitioned thereafter. Meanwhile, cluster makes progress. Then when the partition gets removed, the leader sends a snapshot to node A. Previously if the snapshot's latest revision is still lower than the watch revision X,  **etcd server panicked** during snapshot restore operation.
-  - Now, this server-side panic has been fixed.
-
-### Go
-
-- Compile with [*Go 1.8.7*](https://golang.org/doc/devel/release.html#go1.8).
-
-
-<hr>
-
-
-## [v3.1.15](https://github.com/etcd-io/etcd/releases/tag/v3.1.15) (2018-05-09)
-
-See [code changes](https://github.com/etcd-io/etcd/compare/v3.1.14...v3.1.15) and [v3.1 upgrade guide](https://etcd.io/docs/latest/upgrades/upgrade_3_1/) for any breaking changes.
-
-**Again, before running upgrades from any previous release, please make sure to read change logs below and [v3.1 upgrade guide](https://etcd.io/docs/latest/upgrades/upgrade_3_1/).**
-
-### etcd server
-
-- Purge old [`*.snap.db` snapshot files](https://github.com/etcd-io/etcd/pull/7967).
-  - Previously, etcd did not respect `--max-snapshots` flag to purge old `*.snap.db` files.
-  - Now, etcd purges old `*.snap.db` files to keep maximum `--max-snapshots` number of files on disk.
-
-### Go
-
-- Compile with [*Go 1.8.7*](https://golang.org/doc/devel/release.html#go1.8).
-
-
-<hr>
-
-
-## [v3.1.14](https://github.com/etcd-io/etcd/releases/tag/v3.1.14) (2018-04-24)
-
-See [code changes](https://github.com/etcd-io/etcd/compare/v3.1.13...v3.1.14) and [v3.1 upgrade guide](https://etcd.io/docs/latest/upgrades/upgrade_3_1/) for any breaking changes.
-
-**Again, before running upgrades from any previous release, please make sure to read change logs below and [v3.1 upgrade guide](https://etcd.io/docs/latest/upgrades/upgrade_3_1/).**
-
-### Metrics, Monitoring
-
-See [List of metrics](https://github.com/etcd-io/etcd/tree/main/Documentation/metrics) for all metrics per release.
-
-Note that any `etcd_debugging_*` metrics are experimental and subject to change.
-
-- Add [`etcd_server_is_leader`](https://github.com/etcd-io/etcd/pull/9587) Prometheus metric.
-
-### etcd server
-
-- Add [`--initial-election-tick-advance`](https://github.com/etcd-io/etcd/pull/9591) flag to configure initial election tick fast-forward.
-  - By default, `--initial-election-tick-advance=true`, then local member fast-forwards election ticks to speed up "initial" leader election trigger.
-  - This benefits the case of larger election ticks. For instance, cross datacenter deployment may require longer election timeout of 10-second. If true, local node does not need wait up to 10-second. Instead, forwards its election ticks to 8-second, and have only 2-second left before leader election.
-  - Major assumptions are that: cluster has no active leader thus advancing ticks enables faster leader election. Or cluster already has an established leader, and rejoining follower is likely to receive heartbeats from the leader after tick advance and before election timeout.
-  - However, when network from leader to rejoining follower is congested, and the follower does not receive leader heartbeat within left election ticks, disruptive election has to happen thus affecting cluster availabilities.
-  - Now, this can be disabled by setting `--initial-election-tick-advance=false`.
-  - Disabling this would slow down initial bootstrap process for cross datacenter deployments. Make tradeoffs by configuring `--initial-election-tick-advance` at the cost of slow initial bootstrap.
-  - If single-node, it advances ticks regardless.
-  - Address [disruptive rejoining follower node](https://github.com/etcd-io/etcd/issues/9333).
-
-### Go
-
-- Compile with [*Go 1.8.7*](https://golang.org/doc/devel/release.html#go1.8).
-
-
-<hr>
-
-
-## [v3.1.13](https://github.com/etcd-io/etcd/releases/tag/v3.1.13) (2018-03-29)
-
-See [code changes](https://github.com/etcd-io/etcd/compare/v3.1.12...v3.1.13) and [v3.1 upgrade guide](https://etcd.io/docs/latest/upgrades/upgrade_3_1/) for any breaking changes.
-
-**Again, before running upgrades from any previous release, please make sure to read change logs below and [v3.1 upgrade guide](https://etcd.io/docs/latest/upgrades/upgrade_3_1/).**
-
-### Improved
-
-- Adjust [election timeout on server restart](https://github.com/etcd-io/etcd/pull/9415) to reduce [disruptive rejoining servers](https://github.com/etcd-io/etcd/issues/9333).
-  - Previously, etcd fast-forwards election ticks on server start, with only one tick left for leader election. This is to speed up start phase, without having to wait until all election ticks elapse. Advancing election ticks is useful for cross datacenter deployments with larger election timeouts. However, it was affecting cluster availability if the last tick elapses before leader contacts the restarted node.
-  - Now, when etcd restarts, it adjusts election ticks with more than one tick left, thus more time for leader to prevent disruptive restart.
-
-### Metrics, Monitoring
-
-See [List of metrics](https://github.com/etcd-io/etcd/tree/main/Documentation/metrics) for all metrics per release.
-
-Note that any `etcd_debugging_*` metrics are experimental and subject to change.
-
-- Add missing [`etcd_network_peer_sent_failures_total` count](https://github.com/etcd-io/etcd/pull/9437).
-
-### Go
-
-- Compile with [*Go 1.8.7*](https://golang.org/doc/devel/release.html#go1.8).
-
-
-<hr>
-
-
-## [v3.1.12](https://github.com/etcd-io/etcd/releases/tag/v3.1.12) (2018-03-08)
-
-See [code changes](https://github.com/etcd-io/etcd/compare/v3.1.11...v3.1.12) and [v3.1 upgrade guide](https://etcd.io/docs/latest/upgrades/upgrade_3_1/) for any breaking changes.
-
-**Again, before running upgrades from any previous release, please make sure to read change logs below and [v3.1 upgrade guide](https://etcd.io/docs/latest/upgrades/upgrade_3_1/).**
-
-### etcd server
-
-- Fix [`mvcc` "unsynced" watcher restore operation](https://github.com/etcd-io/etcd/pull/9297).
-  - "unsynced" watcher is watcher that needs to be in sync with events that have happened.
-  - That is, "unsynced" watcher is the slow watcher that was requested on old revision.
-  - "unsynced" watcher restore operation was not correctly populating its underlying watcher group.
-  - Which possibly causes [missing events from "unsynced" watchers](https://github.com/etcd-io/etcd/issues/9086).
-  - A node gets network partitioned with a watcher on a future revision, and falls behind receiving a leader snapshot after partition gets removed. When applying this snapshot, etcd watch storage moves current synced watchers to unsynced since sync watchers might have become stale during network partition. And reset synced watcher group to restart watcher routines. Previously, there was a bug when moving from synced watcher group to unsynced, thus client would miss events when the watcher was requested to the network-partitioned node.
-
-### Go
-
-- Compile with [*Go 1.8.7*](https://golang.org/doc/devel/release.html#go1.8).
-
-
-<hr>
-
-
-## [v3.1.11](https://github.com/etcd-io/etcd/releases/tag/v3.1.11) (2017-11-28)
-
-See [code changes](https://github.com/etcd-io/etcd/compare/v3.1.10...v3.1.11) and [v3.1 upgrade guide](https://etcd.io/docs/latest/upgrades/upgrade_3_1/) for any breaking changes.
-
-**Again, before running upgrades from any previous release, please make sure to read change logs below and [v3.1 upgrade guide](https://etcd.io/docs/latest/upgrades/upgrade_3_1/).**
-
-### etcd server
-
-- [#8411](https://github.com/etcd-io/etcd/issues/8411),[#8806](https://github.com/etcd-io/etcd/pull/8806) backport "mvcc: sending events after restore"
-- [#8009](https://github.com/etcd-io/etcd/issues/8009),[#8902](https://github.com/etcd-io/etcd/pull/8902) backport coreos/bbolt v1.3.1-coreos.5
-
-### Go
-
-- Compile with [*Go 1.8.5*](https://golang.org/doc/devel/release.html#go1.8).
-
-
-<hr>
-
-
-## [v3.1.10](https://github.com/etcd-io/etcd/releases/tag/v3.1.10) (2017-07-14)
-
-See [code changes](https://github.com/etcd-io/etcd/compare/v3.1.9...v3.1.10) and [v3.1 upgrade guide](https://etcd.io/docs/latest/upgrades/upgrade_3_1/) for any breaking changes.
-
-**Again, before running upgrades from any previous release, please make sure to read change logs below and [v3.1 upgrade guide](https://etcd.io/docs/latest/upgrades/upgrade_3_1/).**
-
-### Added
-
-- Tag docker images with minor versions.
-  - e.g. `docker pull quay.io/coreos/etcd:v3.1` to fetch latest v3.1 versions.
-
-### Go
-
-- Compile with [*Go 1.8.3*](https://golang.org/doc/devel/release.html#go1.8).
-  - Fix panic on `net/http.CloseNotify`
-
-
-<hr>
-
-
-## [v3.1.9](https://github.com/etcd-io/etcd/releases/tag/v3.1.9) (2017-06-09)
-
-See [code changes](https://github.com/etcd-io/etcd/compare/v3.1.8...v3.1.9) and [v3.1 upgrade guide](https://etcd.io/docs/latest/upgrades/upgrade_3_1/) for any breaking changes.
-
-**Again, before running upgrades from any previous release, please make sure to read change logs below and [v3.1 upgrade guide](https://etcd.io/docs/latest/upgrades/upgrade_3_1/).**
-
-### etcd server
-
-- Allow v2 snapshot over 512MB.
-
-### Go
-
-- Compile with [*Go 1.7.6*](https://golang.org/doc/devel/release.html#go1.7).
-
-
-<hr>
-
-
-## [v3.1.8](https://github.com/etcd-io/etcd/releases/tag/v3.1.8) (2017-05-19)
-
-See [code changes](https://github.com/etcd-io/etcd/compare/v3.1.7...v3.1.8) and [v3.1 upgrade guide](https://etcd.io/docs/latest/upgrades/upgrade_3_1/) for any breaking changes.
-
-**Again, before running upgrades from any previous release, please make sure to read change logs below and [v3.1 upgrade guide](https://etcd.io/docs/latest/upgrades/upgrade_3_1/).**
-
-### Go
-
-- Compile with [*Go 1.7.5*](https://golang.org/doc/devel/release.html#go1.7).
-
-
-<hr>
-
-
-## [v3.1.7](https://github.com/etcd-io/etcd/releases/tag/v3.1.7) (2017-04-28)
-
-See [code changes](https://github.com/etcd-io/etcd/compare/v3.1.6...v3.1.7) and [v3.1 upgrade guide](https://etcd.io/docs/latest/upgrades/upgrade_3_1/) for any breaking changes.
-
-**Again, before running upgrades from any previous release, please make sure to read change logs below and [v3.1 upgrade guide](https://etcd.io/docs/latest/upgrades/upgrade_3_1/).**
-
-### Go
-
-- Compile with [*Go 1.7.5*](https://golang.org/doc/devel/release.html#go1.7).
-
-
-<hr>
-
-
-## [v3.1.6](https://github.com/etcd-io/etcd/releases/tag/v3.1.6) (2017-04-19)
-
-See [code changes](https://github.com/etcd-io/etcd/compare/v3.1.5...v3.1.6) and [v3.1 upgrade guide](https://etcd.io/docs/latest/upgrades/upgrade_3_1/) for any breaking changes.
-
-**Again, before running upgrades from any previous release, please make sure to read change logs below and [v3.1 upgrade guide](https://etcd.io/docs/latest/upgrades/upgrade_3_1/).**
-
-### etcd server
-
-- Fill in Auth API response header.
-- Remove auth check in Status API.
-
-### Go
-
-- Compile with [*Go 1.7.5*](https://golang.org/doc/devel/release.html#go1.7).
-
-
-<hr>
-
-
-## [v3.1.5](https://github.com/etcd-io/etcd/releases/tag/v3.1.5) (2017-03-27)
-
-See [code changes](https://github.com/etcd-io/etcd/compare/v3.1.4...v3.1.5) and [v3.1 upgrade guide](https://etcd.io/docs/latest/upgrades/upgrade_3_1/) for any breaking changes.
-
-**Again, before running upgrades from any previous release, please make sure to read change logs below and [v3.1 upgrade guide](https://etcd.io/docs/latest/upgrades/upgrade_3_1/).**
-
-### etcd server
-
-- Fix raft memory leak issue.
-- Fix Windows file path issues.
-
-### Other
-
-- Add `/etc/nsswitch.conf` file to alpine-based Docker image.
-
-### Go
-
-- Compile with [*Go 1.7.5*](https://golang.org/doc/devel/release.html#go1.7).
-
-
-<hr>
-
-
-## [v3.1.4](https://github.com/etcd-io/etcd/releases/tag/v3.1.4) (2017-03-22)
-
-See [code changes](https://github.com/etcd-io/etcd/compare/v3.1.3...v3.1.4) and [v3.1 upgrade guide](https://etcd.io/docs/latest/upgrades/upgrade_3_1/) for any breaking changes.
-
-**Again, before running upgrades from any previous release, please make sure to read change logs below and [v3.1 upgrade guide](https://etcd.io/docs/latest/upgrades/upgrade_3_1/).**
-
-### Go
-
-- Compile with [*Go 1.7.5*](https://golang.org/doc/devel/release.html#go1.7).
-
-
-<hr>
-
-
-## [v3.1.3](https://github.com/etcd-io/etcd/releases/tag/v3.1.3) (2017-03-10)
-
-See [code changes](https://github.com/etcd-io/etcd/compare/v3.1.2...v3.1.3) and [v3.1 upgrade guide](https://etcd.io/docs/latest/upgrades/upgrade_3_1/) for any breaking changes.
-
-**Again, before running upgrades from any previous release, please make sure to read change logs below and [v3.1 upgrade guide](https://etcd.io/docs/latest/upgrades/upgrade_3_1/).**
-
-### etcd gateway
-
-- Fix `etcd gateway` schema handling in DNS discovery.
-- Fix sd_notify behaviors in `gateway`, `grpc-proxy`.
-
-### gRPC Proxy
-
-- Fix sd_notify behaviors in `gateway`, `grpc-proxy`.
-
-### Other
-
-- Use machine default host when advertise URLs are default values(`localhost:2379,2380`) AND if listen URL is `0.0.0.0`.
-
-### Go
-
-- Compile with [*Go 1.7.5*](https://golang.org/doc/devel/release.html#go1.7).
-
-
-<hr>
-
-
-## [v3.1.2](https://github.com/etcd-io/etcd/releases/tag/v3.1.2) (2017-02-24)
-
-See [code changes](https://github.com/etcd-io/etcd/compare/v3.1.1...v3.1.2) and [v3.1 upgrade guide](https://etcd.io/docs/latest/upgrades/upgrade_3_1/) for any breaking changes.
-
-**Again, before running upgrades from any previous release, please make sure to read change logs below and [v3.1 upgrade guide](https://etcd.io/docs/latest/upgrades/upgrade_3_1/).**
-
-### etcd gateway
-
-- Fix `etcd gateway` with multiple endpoints.
-
-### Other
-
-- Use IPv4 default host, by default (when IPv4 and IPv6 are available).
-
-### Go
-
-- Compile with [*Go 1.7.5*](https://golang.org/doc/devel/release.html#go1.7).
-
-
-<hr>
-
-
-## [v3.1.1](https://github.com/etcd-io/etcd/releases/tag/v3.1.1) (2017-02-17)
-
-See [code changes](https://github.com/etcd-io/etcd/compare/v3.1.0...v3.1.1) and [v3.1 upgrade guide](https://etcd.io/docs/latest/upgrades/upgrade_3_1/) for any breaking changes.
-
-**Again, before running upgrades from any previous release, please make sure to read change logs below and [v3.1 upgrade guide](https://etcd.io/docs/latest/upgrades/upgrade_3_1/).**
-
-### Go
-
-- Compile with [*Go 1.7.5*](https://golang.org/doc/devel/release.html#go1.7).
-
-
-<hr>
-
-
-## [v3.1.0](https://github.com/etcd-io/etcd/releases/tag/v3.1.0) (2017-01-20)
-
-See [code changes](https://github.com/etcd-io/etcd/compare/v3.0.0...v3.1.0) and [v3.1 upgrade guide](https://etcd.io/docs/latest/upgrades/upgrade_3_1/) for any breaking changes.
-
-**Again, before running upgrades from any previous release, please make sure to read change logs below and [v3.1 upgrade guide](https://etcd.io/docs/latest/upgrades/upgrade_3_1/).**
-
-### Improved
-
-- Faster linearizable reads (implements Raft [read-index](https://github.com/etcd-io/etcd/pull/6212)).
-- v3 authentication API is now stable.
-
-### Breaking Changes
-
-- Deprecated following gRPC metrics in favor of [go-grpc-prometheus](https://github.com/grpc-ecosystem/go-grpc-prometheus).
-  - `etcd_grpc_requests_total`
-  - `etcd_grpc_requests_failed_total`
-  - `etcd_grpc_active_streams`
-  - `etcd_grpc_unary_requests_duration_seconds`
-
-### Dependency
-
-- Upgrade [`github.com/ugorji/go/codec`](https://github.com/ugorji/go) to [**`ugorji/go@9c7f9b7`**](https://github.com/ugorji/go/commit/9c7f9b7a2bc3a520f7c7b30b34b7f85f47fe27b6), and [regenerate v2 `client`](https://github.com/etcd-io/etcd/pull/6945).
-
-### Security, Authentication
-
-See [security doc](https://etcd.io/docs/latest/op-guide/security/) for more details.
-
-- SRV records (e.g., infra1.example.com) must match the discovery domain (i.e., example.com) if no custom certificate authority is given.
-  - `TLSConfig.ServerName` is ignored with user-provided certificates for backwards compatibility; to be deprecated.
-  - For example, `etcd --discovery-srv=example.com` will only authenticate peers/clients when the provided certs have root domain `example.com` as an entry in Subject Alternative Name (SAN) field.
-
-### etcd server
-
-- Automatic leadership transfer when leader steps down.
-- etcd flags
-  - `--strict-reconfig-check` flag is set by default.
-  - Add `--log-output` flag.
-  - Add `--metrics` flag.
-- etcd uses default route IP if advertise URL is not given.
-- Cluster rejects removing members if quorum will be lost.
-- Discovery now has upper limit for waiting on retries.
-- Warn on binding listeners through domain names; to be deprecated.
-- v3.0 and v3.1 with `--auto-compaction-retention=10` run periodic compaction on v3 key-value store for every 10-hour.
-  - Compactor only supports periodic compaction.
-  - Compactor records latest revisions every 5-minute, until it reaches the first compaction period (e.g. 10-hour).
-  - In order to retain key-value history of last compaction period, it uses the last revision that was fetched before compaction period, from the revision records that were collected every 5-minute.
-  - When `--auto-compaction-retention=10`, compactor uses revision 100 for compact revision where revision 100 is the latest revision fetched from 10 hours ago.
-  - If compaction succeeds or requested revision has already been compacted, it resets period timer and starts over with new historical revision records (e.g. restart revision collect and compact for the next 10-hour period).
-  - If compaction fails, it retries in 5 minutes.
-
-### client v3
-
-- Add `SetEndpoints` method; update endpoints at runtime.
-- Add `Sync` method; auto-update endpoints at runtime.
-- Add `Lease TimeToLive` API; fetch lease information.
-- replace Config.Logger field with global logger.
-- Get API responses are sorted in ascending order by default.
-
-### etcdctl v3
-
-- Add `lease timetolive` command.
-- Add `--print-value-only` flag to get command.
-- Add `--dest-prefix` flag to make-mirror command.
-- `get` command responses are sorted in ascending order by default.
-
-### gRPC Proxy
-
-- Experimental gRPC proxy feature.
-
-### Other
-
-- `recipes` now conform to sessions defined in `clientv3/concurrency`.
-- ACI has symlinks to `/usr/local/bin/etcd*`.
-
-### Go
-
-- Compile with [*Go 1.7.4*](https://golang.org/doc/devel/release.html#go1.7).
-
-
-<hr>
-

CHANGELOG/CHANGELOG-3.5.md

@@ -1,508 +0,0 @@
-
-
-Previous change logs can be found at [CHANGELOG-3.4](https://github.com/etcd-io/etcd/blob/main/CHANGELOG/CHANGELOG-3.4.md).
-
-<hr>
-
-## v3.5.10 (tbd)
-
-### etcd server
-- Fix [corruption check may get a `ErrCompacted` error when server has just been compacted](https://github.com/etcd-io/etcd/pull/16048)
-- Improve [Lease put performance for the case that auth is disabled or the user is admin](https://github.com/etcd-io/etcd/pull/16019)
-
-### etcd grpc-proxy
-- Fix [Memberlist results not updated when proxy node down](https://github.com/etcd-io/etcd/pull/15907).
-
-<hr>
-
-## v3.5.9 (2023-05-11)
-
-### etcd server
-- Fix [LeaseTimeToLive API may return keys to clients which have no read permission on the keys](https://github.com/etcd-io/etcd/pull/15815).
-
-### Dependencies
-- Compile binaries using [go 1.19.9](https://github.com/etcd-io/etcd/pull/15822).
-
-<hr>
-
-## v3.5.8 (2023-04-13)
-
-### etcd server
-- Add [`etcd --tls-min-version --tls-max-version`](https://github.com/etcd-io/etcd/pull/15483) to enable support for TLS 1.3.
-- Add [`etcd --listen-client-http-urls`](https://github.com/etcd-io/etcd/pull/15589) flag to support separating http server from grpc one, thus giving full immunity to [watch stream starvation under high read load](https://github.com/etcd-io/etcd/issues/15402).
-- Change [http2 frame scheduler to random algorithm](https://github.com/etcd-io/etcd/pull/15452)
-- Fix [Watch response traveling back in time when reconnecting member downloads snapshot from the leader](https://github.com/etcd-io/etcd/pull/15515)
-- Fix [race when starting both secure & insecure gRPC servers on the same address](https://github.com/etcd-io/etcd/pull/15517)
-- Fix [server/auth: disallow creating empty permission ranges](https://github.com/etcd-io/etcd/pull/15619)
-- Fix [aligning zap log timestamp resolution to microseconds](https://github.com/etcd-io/etcd/pull/15240). Etcd now uses zap timestamp format: `2006-01-02T15:04:05.999999Z0700` (microsecond instead of milliseconds precision).
-- Fix [wsproxy did not print log in JSON format](https://github.com/etcd-io/etcd/pull/15661).
-- Fix [CVE-2021-28235](https://nvd.nist.gov/vuln/detail/CVE-2021-28235) by [clearing password after authenticating the user](https://github.com/etcd-io/etcd/pull/15653).
-- Fix [etcdserver may panic when parsing a JWT token without username or revision](https://github.com/etcd-io/etcd/pull/15676).
-- Fix [Requested watcher progress notifications are not synchronised with stream](https://github.com/etcd-io/etcd/pull/15695).
-
-### Package `netutil`
-- Fix [consistently format IPv6 addresses for comparison](https://github.com/etcd-io/etcd/pull/15187).
-
-### Package `clientv3`
-- Fix [etcd might send duplicated events to watch clients](https://github.com/etcd-io/etcd/pull/15274).
-
-### Dependencies
-- Recommend [Go 1.19+](https://github.com/etcd-io/etcd/pull/15337).
-- Compile binaries using [go to 1.19.8](https://github.com/etcd-io/etcd/pull/15651)
-- Upgrade [golang.org/x/net to v0.7.0](https://github.com/etcd-io/etcd/pull/15337)
-- Upgrade [bbolt to v1.3.7](https://github.com/etcd-io/etcd/pull/15222).
-
-### Docker image
-- [Remove nsswitch.conf from docker image](https://github.com/etcd-io/etcd/pull/15161)
-- Fix [etcd docker images all tagged with amd64 architecture](https://github.com/etcd-io/etcd/pull/15612)
-
-<hr>
-
-## v3.5.7 (2023-01-20)
-
-### etcd server
-- Fix [Remove memberID from data corrupt alarm](https://github.com/etcd-io/etcd/pull/14852).
-- Fix [Allow non mutating requests pass through quotaKVServer when NOSPACE](https://github.com/etcd-io/etcd/pull/14884).
-- Fix [nil pointer panic for readonly txn due to nil response](https://github.com/etcd-io/etcd/pull/14899).
-- Fix [The last record which was partially synced to disk isn't automatically repaired](https://github.com/etcd-io/etcd/pull/15069).
-- Fix [etcdserver might promote a non-started learner](https://github.com/etcd-io/etcd/pull/15096).
-
-### Package `clientv3`
-- Reverted the fix to [auth invalid token and old revision errors in watch](https://github.com/etcd-io/etcd/pull/14995).
-
-### Dependencies
-- Recommend [Go 1.17+](https://github.com/etcd-io/etcd/pull/15019).
-- Compile binaries using [Go 1.17.13](https://github.com/etcd-io/etcd/pull/15019)
-- Bumped [some dependencies](https://github.com/etcd-io/etcd/pull/15018) to address some HIGH Vulnerabilities.
-
-### Docker image
-- Use [distroless base image](https://github.com/etcd-io/etcd/pull/15016) to address critical Vulnerabilities.
-- Updated [base image from base-debian11 to static-debian11 and removed dependency on busybox](https://github.com/etcd-io/etcd/pull/15037).
-
-<hr>
-
-## v3.5.6 (2022-11-21)
-
-### etcd server
-- Fix [auth invalid token and old revision errors in watch](https://github.com/etcd-io/etcd/pull/14547)
-- Fix [avoid closing a watch with ID 0 incorrectly](https://github.com/etcd-io/etcd/pull/14563)
-- Fix [auth: fix data consistency issue caused by recovery from snapshot](https://github.com/etcd-io/etcd/pull/14648)
-- Fix [revision might be inconsistency between members when etcd crashes during processing defragmentation operation](https://github.com/etcd-io/etcd/pull/14733)
-- Fix [timestamp in inconsistent format](https://github.com/etcd-io/etcd/pull/14799)
-- Fix [Failed resolving host due to lost DNS record](https://github.com/etcd-io/etcd/pull/14573)
-
-### Package `clientv3`
-- Fix [Add backoff before retry when watch stream returns unavailable](https://github.com/etcd-io/etcd/pull/14582).
-- Fix [stack overflow error in double barrier](https://github.com/etcd-io/etcd/pull/14658)
-- Fix [Refreshing token on CommonName based authentication causes segmentation violation in client](https://github.com/etcd-io/etcd/pull/14790).
-
-### etcd grpc-proxy
-- Add [`etcd grpc-proxy start --listen-cipher-suites`](https://github.com/etcd-io/etcd/pull/14500) flag to support adding configurable cipher list.
-
-<hr>
-
-## v3.5.5 (2022-09-15)
-
-### Deprecations
-- Deprecated [SetKeepAlive and SetKeepAlivePeriod in limitListenerConn](https://github.com/etcd-io/etcd/pull/14366).
-
-### Package `clientv3`
-- Fix [do not overwrite authTokenBundle on dial](https://github.com/etcd-io/etcd/pull/14132).
-- Fix [IsOptsWithPrefix returns false even if WithPrefix() is included](https://github.com/etcd-io/etcd/pull/14187).
-
-### etcd server
-- [Build official darwin/arm64 artifacts](https://github.com/etcd-io/etcd/pull/14436).
-- Add [`etcd --max-concurrent-streams`](https://github.com/etcd-io/etcd/pull/14219) flag to configure the max concurrent streams each client can open at a time, and defaults to math.MaxUint32.
-- Add [`etcd --experimental-compact-hash-check-enabled --experimental-compact-hash-check-time`](https://github.com/etcd-io/etcd/issues/14039) flags to support enabling reliable corruption detection on compacted revisions.
-- Fix [unexpected error during txn](https://github.com/etcd-io/etcd/issues/14110).
-- Fix [lease leak issue due to tokenProvider isn't enabled when restoring auth store from a snapshot](https://github.com/etcd-io/etcd/pull/13205).
-- Fix [the race condition between goroutine and channel on the same leases to be revoked](https://github.com/etcd-io/etcd/pull/14087).
-- Fix [lessor may continue to schedule checkpoint after stepping down leader role](https://github.com/etcd-io/etcd/pull/14087).
-- Fix [Restrict the max size of each WAL entry to the remaining size of the WAL file](https://github.com/etcd-io/etcd/pull/14127).
-- Fix [Protect rangePermCache with a RW lock correctly](https://github.com/etcd-io/etcd/pull/14227)
-- Fix [memberID equals zero in corruption alarm](https://github.com/etcd-io/etcd/pull/14272)
-- Fix [Durability API guarantee broken in single node cluster](https://github.com/etcd-io/etcd/pull/14424)
-- Fix [etcd fails to start after performing alarm list operation and then power off/on](https://github.com/etcd-io/etcd/pull/14429)
-- Fix [authentication data not loaded on member startup](https://github.com/etcd-io/etcd/pull/14409)
-
-### etcdctl v3
-
-- Fix [etcdctl move-leader may fail for multiple endpoints](https://github.com/etcd-io/etcd/pull/14434)
-
-
-### Other
-- [Bump golang.org/x/crypto to latest version](https://github.com/etcd-io/etcd/pull/13996) to address [CVE-2022-27191](https://github.com/advisories/GHSA-8c26-wmh5-6g9v).
-- [Bump OpenTelemetry to 1.0.1 and gRPC to 1.41.0](https://github.com/etcd-io/etcd/pull/14312).
-
-<hr>
-
-## v3.5.4 (2022-04-24)
-
-### etcd server
-- Fix [etcd panic on startup (auth enabled)](https://github.com/etcd-io/etcd/pull/13946)
-
-### package `client/pkg/v3`
-
-- [Revert the change of trimming the trailing dot from SRV.Target](https://github.com/etcd-io/etcd/pull/13950) returned by DNS lookup
-
-
-<hr>
-
-## v3.5.3 (2022-04-13)
-
-### etcd server
-- Fix [Provide a better liveness probe for when etcd runs as a Kubernetes pod](https://github.com/etcd-io/etcd/pull/13706)
-- Fix [inconsistent log format](https://github.com/etcd-io/etcd/pull/13864)
-- Fix [Inconsistent revision and data occurs](https://github.com/etcd-io/etcd/pull/13908)
-- Fix [Etcdserver is still in progress of processing LeaseGrantRequest when it receives a LeaseKeepAliveRequest on the same leaseID](https://github.com/etcd-io/etcd/pull/13932)
-- Fix [consistent_index coming from snapshot is overwritten by the old local value](https://github.com/etcd-io/etcd/pull/13933)
-- [Update container base image snapshot](https://github.com/etcd-io/etcd/pull/13862)
-- Fix [Defrag unsets backend options](https://github.com/etcd-io/etcd/pull/13701).
-
-### package `client/pkg/v3`
-
-- [Trim the suffix dot from the target](https://github.com/etcd-io/etcd/pull/13714) in SRV records returned by DNS lookup
-
-### etcdctl v3
-
-- [Always print the raft_term in decimal](https://github.com/etcd-io/etcd/pull/13727) when displaying member list in json.
-
-<hr>
-
-## [v3.5.2](https://github.com/etcd-io/etcd/releases/tag/v3.5.2) (2022-02-01)
-
-See [code changes](https://github.com/etcd-io/etcd/compare/v3.5.1...v3.5.2) and [v3.5 upgrade guide](https://etcd.io/docs/latest/upgrades/upgrade_3_5/) for any breaking changes.
-
-### etcd server
-- Fix [exclude the same alarm type activated by multiple peers](https://github.com/etcd-io/etcd/pull/13476).
-- Add [`etcd --experimental-enable-lease-checkpoint-persist`](https://github.com/etcd-io/etcd/pull/13508) flag to enable checkpoint persisting.
-- Fix [Lease checkpoints don't prevent to reset ttl on leader change](https://github.com/etcd-io/etcd/pull/13508), requires enabling checkpoint persisting.
-- Fix [assertion failed due to tx closed when recovering v3 backend from a snapshot db](https://github.com/etcd-io/etcd/pull/13501)
-- Fix [segmentation violation(SIGSEGV) error due to premature unlocking of watchableStore](https://github.com/etcd-io/etcd/pull/13541)
-
-<hr>
-
-## [v3.5.1](https://github.com/etcd-io/etcd/releases/tag/v3.5.1) (2021-10-15)
-
-See [code changes](https://github.com/etcd-io/etcd/compare/v3.5.0...v3.5.1) and [v3.5 upgrade guide](https://etcd.io/docs/latest/upgrades/upgrade_3_5/) for any breaking changes.
-
-### etcd server
-
-- Fix [self-signed-cert-validity parameter cannot be specified in the config file](https://github.com/etcd-io/etcd/pull/13237).
-- Fix [ensure that cluster members stored in v2store and backend are in sync](https://github.com/etcd-io/etcd/pull/13348)
-
-### etcd client
-
-- [Fix etcd client sends invalid :authority header](https://github.com/etcd-io/etcd/issues/13192)
-
-### package clientv3
-
-- Endpoints self identify now as `etcd-endpoints://{id}/{authority}` where authority is based on first endpoint passed, for example `etcd-endpoints://0xc0009d8540/localhost:2079`
-
-### Other
-
-- Updated [base image](https://github.com/etcd-io/etcd/pull/13386) from `debian:buster-v1.4.0` to `debian:bullseye-20210927` to fix the following critical CVEs:
-  - [CVE-2021-3711](https://nvd.nist.gov/vuln/detail/CVE-2021-3711): miscalculation of a buffer size in openssl's SM2 decryption
-  - [CVE-2021-35942](https://nvd.nist.gov/vuln/detail/CVE-2021-35942): integer overflow flaw in glibc
-  - [CVE-2019-9893](https://nvd.nist.gov/vuln/detail/CVE-2019-9893): incorrect syscall argument generation in libseccomp
-  - [CVE-2021-36159](https://nvd.nist.gov/vuln/detail/CVE-2021-36159): libfetch in apk-tools mishandles numeric strings in FTP and HTTP protocols to allow out of bound reads.
-
-<hr>
-
-## v3.5.0 (2021-06)
-
-See [code changes](https://github.com/etcd-io/etcd/compare/v3.4.0...v3.5.0) and [v3.5 upgrade guide](https://etcd.io/docs/latest/upgrades/upgrade_3_5/) for any breaking changes.
-
-- [v3.5.0](https://github.com/etcd-io/etcd/releases/tag/v3.5.0) (2021 TBD), see [code changes](https://github.com/etcd-io/etcd/compare/v3.5.0-rc.1...v3.5.0).
-- [v3.5.0-rc.1](https://github.com/etcd-io/etcd/releases/tag/v3.5.0-rc.1) (2021-06-10), see [code changes](https://github.com/etcd-io/etcd/compare/v3.5.0-rc.0...v3.5.0-rc.1).
-- [v3.5.0-rc.0](https://github.com/etcd-io/etcd/releases/tag/v3.5.0-rc.0) (2021-06-04), see [code changes](https://github.com/etcd-io/etcd/compare/v3.5.0-beta.4...v3.5.0-rc.0).
-- [v3.5.0-beta.4](https://github.com/etcd-io/etcd/releases/tag/v3.5.0-beta.4) (2021-05-26), see [code changes](https://github.com/etcd-io/etcd/compare/v3.5.0-beta.3...v3.5.0-beta.4).
-- [v3.5.0-beta.3](https://github.com/etcd-io/etcd/releases/tag/v3.5.0-beta.3) (2021-05-18), see [code changes](https://github.com/etcd-io/etcd/compare/v3.5.0-beta.2...v3.5.0-beta.3).
-- [v3.5.0-beta.2](https://github.com/etcd-io/etcd/releases/tag/v3.5.0-beta.2) (2021-05-18), see [code changes](https://github.com/etcd-io/etcd/compare/v3.5.0-beta.1...v3.5.0-beta.2).
-- [v3.5.0-beta.1](https://github.com/etcd-io/etcd/releases/tag/v3.5.0-beta.1) (2021-05-18), see [code changes](https://github.com/etcd-io/etcd/compare/v3.4.0...v3.5.0-beta.1).
-
-**Again, before running upgrades from any previous release, please make sure to read change logs below and [v3.5 upgrade guide](https://etcd.io/docs/latest/upgrades/upgrade_3_5/).**
-
-### Breaking Changes
-
-- `go.etcd.io/etcd` Go packages have moved to `go.etcd.io/etcd/{api,pkg,raft,client,etcdctl,server,raft,tests}/v3` to follow the [Go modules](https://github.com/golang/go/wiki/Modules) conventions
-- `go.etcd.io/clientv3/snapshot` SnapshotManager class have moved to `go.etcd.io/clientv3/etcdctl`.
-   The method `snapshot.Save` to download a snapshot from the remote server was preserved in 'go.etcd.io/clientv3/snapshot`.
-- `go.etcd.io/client' package got migrated to 'go.etcd.io/client/v2'.
-- Changed behavior of clientv3 API [MemberList](https://github.com/etcd-io/etcd/pull/11639).
-  - Previously, it is directly served with server's local data, which could be stale.
-  - Now, it is served with linearizable guarantee. If the server is disconnected from quorum, `MemberList` call will fail.
-- [gRPC gateway](https://github.com/grpc-ecosystem/grpc-gateway) only supports [`/v3`](TODO) endpoint.
-  - Deprecated [`/v3beta`](https://github.com/etcd-io/etcd/pull/9298).
-  - `curl -L http://localhost:2379/v3beta/kv/put -X POST -d '{"key": "Zm9v", "value": "YmFy"}'` doesn't work in v3.5. Use `curl -L http://localhost:2379/v3/kv/put -X POST -d '{"key": "Zm9v", "value": "YmFy"}'` instead.
-- **`etcd --experimental-enable-v2v3` flag remains experimental and to be deprecated.**
-  - v2 storage emulation feature will be deprecated in the next release.
-  - etcd 3.5 is the last version that supports V2 API. Flags `--enable-v2` and `--experimental-enable-v2v3` [are now deprecated](https://github.com/etcd-io/etcd/pull/12940) and will be removed in etcd v3.6 release.
-- **`etcd --experimental-backend-bbolt-freelist-type` flag has been deprecated.** Use **`etcd --backend-bbolt-freelist-type`** instead. The default type is hashmap and it is stable now.
-- **`etcd --debug` flag has been deprecated.** Use **`etcd --log-level=debug`** instead.
-- Remove [`embed.Config.Debug`](https://github.com/etcd-io/etcd/pull/10947).
-- **`etcd --log-output` flag has been deprecated.** Use **`etcd --log-outputs`** instead.
-- **`etcd --logger=zap --log-outputs=stderr`** is now the default.
-- **`etcd --logger=capnslog` flag value has been deprecated.**
-- **`etcd --logger=zap --log-outputs=default` flag value is not supported.**.
-  - Use `etcd --logger=zap --log-outputs=stderr`.
-  - Or, use `etcd --logger=zap --log-outputs=systemd/journal` to send logs to the local systemd journal.
-  - Previously, if etcd parent process ID (PPID) is 1 (e.g. run with systemd), `etcd --logger=capnslog --log-outputs=default` redirects server logs to local systemd journal. And if write to journald fails, it writes to `os.Stderr` as a fallback.
-  - However, even with PPID 1, it can fail to dial systemd journal (e.g. run embedded etcd with Docker container). Then, [every single log write will fail](https://github.com/etcd-io/etcd/pull/9729) and fall back to `os.Stderr`, which is inefficient.
-  - To avoid this problem, systemd journal logging must be configured manually.
-- **`etcd --log-outputs=stderr`** is now the default.
-- **`etcd --log-package-levels` flag for `capnslog` has been deprecated.** Now, **`etcd --logger=zap --log-outputs=stderr`** is the default.
-- **`[CLIENT-URL]/config/local/log` endpoint has been deprecated, as is `etcd --log-package-levels` flag.**
-  - `curl http://127.0.0.1:2379/config/local/log -XPUT -d '{"Level":"DEBUG"}'` won't work.
-  - Please use `etcd --logger=zap --log-outputs=stderr` instead.
-- Deprecated `etcd_debugging_mvcc_db_total_size_in_bytes` Prometheus metric. Use `etcd_mvcc_db_total_size_in_bytes` instead.
-- Deprecated `etcd_debugging_mvcc_put_total` Prometheus metric. Use `etcd_mvcc_put_total` instead.
-- Deprecated `etcd_debugging_mvcc_delete_total` Prometheus metric. Use `etcd_mvcc_delete_total` instead.
-- Deprecated `etcd_debugging_mvcc_txn_total` Prometheus metric. Use `etcd_mvcc_txn_total` instead.
-- Deprecated `etcd_debugging_mvcc_range_total` Prometheus metric. Use `etcd_mvcc_range_total` instead.
-- Main branch `/version` outputs `3.5.0-pre`, instead of `3.4.0+git`.
-- Changed `proxy` package function signature to [support structured logger](https://github.com/etcd-io/etcd/pull/11614).
-  - Previously, `NewClusterProxy(c *clientv3.Client, advaddr string, prefix string) (pb.ClusterServer, <-chan struct{})`, now `NewClusterProxy(lg *zap.Logger, c *clientv3.Client, advaddr string, prefix string) (pb.ClusterServer, <-chan struct{})`.
-  - Previously, `Register(c *clientv3.Client, prefix string, addr string, ttl int)`, now `Register(lg *zap.Logger, c *clientv3.Client, prefix string, addr string, ttl int) <-chan struct{}`.
-  - Previously, `NewHandler(t *http.Transport, urlsFunc GetProxyURLs, failureWait time.Duration, refreshInterval time.Duration) http.Handler`, now `NewHandler(lg *zap.Logger, t *http.Transport, urlsFunc GetProxyURLs, failureWait time.Duration, refreshInterval time.Duration) http.Handler`.
-- Changed `pkg/flags` function signature to [support structured logger](https://github.com/etcd-io/etcd/pull/11616).
-  - Previously, `SetFlagsFromEnv(prefix string, fs *flag.FlagSet) error`, now `SetFlagsFromEnv(lg *zap.Logger, prefix string, fs *flag.FlagSet) error`.
-  - Previously, `SetPflagsFromEnv(prefix string, fs *pflag.FlagSet) error`, now `SetPflagsFromEnv(lg *zap.Logger, prefix string, fs *pflag.FlagSet) error`.
-- ClientV3 supports [grpc resolver API](https://github.com/etcd-io/etcd/blob/main/client/v3/naming/resolver/resolver.go).
-  - Endpoints can be managed using [endpoints.Manager](https://github.com/etcd-io/etcd/blob/main/client/v3/naming/endpoints/endpoints.go)
-  - Previously supported [GRPCResolver was decomissioned](https://github.com/etcd-io/etcd/pull/12675). Use [resolver](https://github.com/etcd-io/etcd/blob/main/client/v3/naming/resolver/resolver.go) instead.
-- Turned on [--pre-vote by default](https://github.com/etcd-io/etcd/pull/12770). Should prevent disrupting RAFT leader by an individual member.
-- [ETCD_CLIENT_DEBUG env](https://github.com/etcd-io/etcd/pull/12786): Now supports log levels (debug, info, warn, error, dpanic, panic, fatal). Only when set, overrides application-wide grpc logging settings.
-- [Embed Etcd.Close()](https://github.com/etcd-io/etcd/pull/12828) needs to called exactly once and closes Etcd.Err() stream.
-- [Embed Etcd does not override global/grpc logger](https://github.com/etcd-io/etcd/pull/12861) be default any longer. If desired, please call `embed.Config::SetupGlobalLoggers()` explicitly. 
-- [Embed Etcd custom logger should be configured using simpler builder `NewZapLoggerBuilder`](https://github.com/etcd-io/etcd/pull/12973).
-- Client errors of `context cancelled` or `context deadline exceeded` are exposed as `codes.Canceled` and `codes.DeadlineExceeded`, instead of `codes.Unknown`.
-
-
-### Storage format changes
-- [WAL log's snapshots persists raftpb.ConfState](https://github.com/etcd-io/etcd/pull/12735)
-- [Backend persists raftpb.ConfState](https://github.com/etcd-io/etcd/pull/12962) in the `meta` bucket `confState` key.
-- [Backend persists applied term](https://github.com/etcd-io/etcd/pull/) in the `meta` bucket.
-- Backend persists `downgrade` in the `cluster` bucket
-
-### Security
-
-- Add [`TLS_ECDHE_RSA_WITH_CHACHA20_POLY1305_SHA256` and `TLS_ECDHE_ECDSA_WITH_CHACHA20_POLY1305_SHA256` to `etcd --cipher-suites`](https://github.com/etcd-io/etcd/pull/11864).
-- Changed [the format of WAL entries related to auth for not keeping password as a plain text](https://github.com/etcd-io/etcd/pull/11943).
-- Add third party [Security Audit Report](https://github.com/etcd-io/etcd/pull/12201).
-- A [log warning](https://github.com/etcd-io/etcd/pull/12242) is added when etcd uses any existing directory that has a permission different than 700 on Linux and 777 on Windows.
-- Add optional [`ClientCertFile` and `ClientKeyFile`](https://github.com/etcd-io/etcd/pull/12705) options for peer and client tls configuration when split certificates are used.
-
-### Metrics, Monitoring
-
-See [List of metrics](https://etcd.io/docs/latest/metrics/) for all metrics per release.
-
-Note that any `etcd_debugging_*` metrics are experimental and subject to change.
-
-- Deprecated `etcd_debugging_mvcc_db_total_size_in_bytes` Prometheus metric. Use `etcd_mvcc_db_total_size_in_bytes` instead.
-- Deprecated `etcd_debugging_mvcc_put_total` Prometheus metric. Use `etcd_mvcc_put_total` instead.
-- Deprecated `etcd_debugging_mvcc_delete_total` Prometheus metric. Use `etcd_mvcc_delete_total` instead.
-- Deprecated `etcd_debugging_mvcc_txn_total` Prometheus metric. Use `etcd_mvcc_txn_total` instead.
-- Deprecated `etcd_debugging_mvcc_range_total` Prometheus metric. Use `etcd_mvcc_range_total` instead.
-- Add [`etcd_debugging_mvcc_current_revision`](https://github.com/etcd-io/etcd/pull/11126) Prometheus metric.
-- Add [`etcd_debugging_mvcc_compact_revision`](https://github.com/etcd-io/etcd/pull/11126) Prometheus metric.
-- Change [`etcd_cluster_version`](https://github.com/etcd-io/etcd/pull/11254) Prometheus metrics to include only major and minor version.
-- Add [`etcd_debugging_mvcc_total_put_size_in_bytes`](https://github.com/etcd-io/etcd/pull/11374) Prometheus metric.
-- Add [`etcd_server_client_requests_total` with `"type"` and `"client_api_version"` labels](https://github.com/etcd-io/etcd/pull/11687).
-- Add [`etcd_wal_write_bytes_total`](https://github.com/etcd-io/etcd/pull/11738).
-- Add [`etcd_debugging_auth_revision`](https://github.com/etcd-io/etcd/commit/f14d2a087f7b0fd6f7980b95b5e0b945109c95f3).
-- Add [`os_fd_used` and `os_fd_limit` to monitor current OS file descriptors](https://github.com/etcd-io/etcd/pull/12214).
-- Add [`etcd_disk_defrag_inflight`](https://github.com/etcd-io/etcd/pull/13395).
-
-### etcd server
-
-  - Add [don't attempt to grant nil permission to a role](https://github.com/etcd-io/etcd/pull/13086).
-  - Add [don't activate alarms w/missing AlarmType](https://github.com/etcd-io/etcd/pull/13084).
-  - Add [`TLS_ECDHE_RSA_WITH_CHACHA20_POLY1305_SHA256` and `TLS_ECDHE_ECDSA_WITH_CHACHA20_POLY1305_SHA256` to `etcd --cipher-suites`](https://github.com/etcd-io/etcd/pull/11864).
-  - Automatically [create parent directory if it does not exist](https://github.com/etcd-io/etcd/pull/9626) (fix [issue#9609](https://github.com/etcd-io/etcd/issues/9609)).
-  - v4.0 will configure `etcd --enable-v2=true --enable-v2v3=/aaa` to enable v2 API server that is backed by **v3 storage**.
-- [`etcd --backend-bbolt-freelist-type`] flag is now stable.
-  - `etcd --experimental-backend-bbolt-freelist-type` has been deprecated.
-- Support [downgrade API](https://github.com/etcd-io/etcd/pull/11715).
-- Deprecate v2 apply on cluster version. [Use v3 request to set cluster version and recover cluster version from v3 backend](https://github.com/etcd-io/etcd/pull/11427).
-- [Use v2 api to update cluster version to support mixed version cluster during upgrade](https://github.com/etcd-io/etcd/pull/12988).
-- [Fix corruption bug in defrag](https://github.com/etcd-io/etcd/pull/11613).
-- Fix [quorum protection logic when promoting a learner](https://github.com/etcd-io/etcd/pull/11640).
-- Improve [peer corruption checker](https://github.com/etcd-io/etcd/pull/11621) to work when peer mTLS is enabled.
-- Log [`[CLIENT-PORT]/health` check in server side](https://github.com/etcd-io/etcd/pull/11704).
-- Log [successful etcd server-side health check in debug level](https://github.com/etcd-io/etcd/pull/12677).
-- Improve [compaction performance when latest index is greater than 1-million](https://github.com/etcd-io/etcd/pull/11734).
-- [Refactor consistentindex](https://github.com/etcd-io/etcd/pull/11699).
-- [Add log when etcdserver failed to apply command](https://github.com/etcd-io/etcd/pull/11670).
-- Improve [count-only range performance](https://github.com/etcd-io/etcd/pull/11771).
-- Remove [redundant storage restore operation to shorten the startup time](https://github.com/etcd-io/etcd/pull/11779).
-  - With 40 million key test data,it can shorten the startup time from 5 min to 2.5 min.
-- [Fix deadlock bug in mvcc](https://github.com/etcd-io/etcd/pull/11817).
-- Fix [inconsistency between WAL and server snapshot](https://github.com/etcd-io/etcd/pull/11888).
-  - Previously, server restore fails if it had crashed after persisting raft hard state but before saving snapshot.
-  - See https://github.com/etcd-io/etcd/issues/10219 for more.
-  - Add [missing CRC checksum check in WAL validate method otherwise causes panic](https://github.com/etcd-io/etcd/pull/11924).
-  - See https://github.com/etcd-io/etcd/issues/11918.
-- Improve logging around snapshot send and receive.
-- [Push down RangeOptions.limit argv into index tree to reduce memory overhead](https://github.com/etcd-io/etcd/pull/11990).
-- Add [reason field for /health response](https://github.com/etcd-io/etcd/pull/11983).
-- Add [exclude alarms from health check conditionally](https://github.com/etcd-io/etcd/pull/12880).
-- Add [`etcd --unsafe-no-fsync`](https://github.com/etcd-io/etcd/pull/11946) flag.
-  - Setting the flag disables all uses of fsync, which is unsafe and will cause data loss. This flag makes it possible to run an etcd node for testing and development without placing lots of load on the file system.
-- Add [`etcd --auth-token-ttl`](https://github.com/etcd-io/etcd/pull/11980) flag to customize `simpleTokenTTL` settings.
-- Improve [`runtime.FDUsage` call pattern to reduce objects malloc of Memory Usage and CPU Usage](https://github.com/etcd-io/etcd/pull/11986).
-- Improve [mvcc.watchResponse channel Memory Usage](https://github.com/etcd-io/etcd/pull/11987).
-- Log [expensive request info in UnaryInterceptor](https://github.com/etcd-io/etcd/pull/12086).
-- [Fix invalid Go type in etcdserverpb](https://github.com/etcd-io/etcd/pull/12000).
-- [Improve healthcheck by using v3 range request and its corresponding timeout](https://github.com/etcd-io/etcd/pull/12195).
-- Add [`etcd --experimental-watch-progress-notify-interval`](https://github.com/etcd-io/etcd/pull/12216) flag to make watch progress notify interval configurable.
-- Fix [server panic in slow writes warnings](https://github.com/etcd-io/etcd/issues/12197).
-  - Fixed via [PR#12238](https://github.com/etcd-io/etcd/pull/12238).
-- [Fix server panic](https://github.com/etcd-io/etcd/pull/12288) when force-new-cluster flag is enabled in a cluster which had learner node.
-- Add [`etcd --self-signed-cert-validity`](https://github.com/etcd-io/etcd/pull/12429) flag to support setting certificate expiration time.
-  - Notice, certificates generated by etcd are valid for 1 year by default when specifying the auto-tls or peer-auto-tls option.
-- Add [`etcd --experimental-warning-apply-duration`](https://github.com/etcd-io/etcd/pull/12448) flag which allows apply duration threshold to be configurable.
-- Add [`etcd --experimental-memory-mlock`](https://github.com/etcd-io/etcd/pull/TODO) flag which prevents etcd memory pages to be swapped out.
-- Add [`etcd --socket-reuse-port`](https://github.com/etcd-io/etcd/pull/12702) flag
-  - Setting this flag enables `SO_REUSEPORT` which allows rebind of a port already in use. User should take caution when using this flag to ensure flock is properly enforced.
-- Add [`etcd --socket-reuse-address`](https://github.com/etcd-io/etcd/pull/12702) flag
-  - Setting this flag enables `SO_REUSEADDR` which allows binding to an address in `TIME_WAIT` state, improving etcd restart time.
-- Reduce [around 30% memory allocation by logging range response size without marshal](https://github.com/etcd-io/etcd/pull/12871).
-- `ETCD_VERIFY="all"` environment triggers [additional verification of consistency](https://github.com/etcd-io/etcd/pull/12901) of etcd data-dir files.
-- Add [`etcd --enable-log-rotation`](https://github.com/etcd-io/etcd/pull/12774) boolean flag which enables log rotation if true.
-- Add [`etcd --log-rotation-config-json`](https://github.com/etcd-io/etcd/pull/12774) flag which allows passthrough of JSON config to configure log rotation for a file output target.
-- Add experimental distributed tracing boolean flag [`--experimental-enable-distributed-tracing`](https://github.com/etcd-io/etcd/pull/12919) which enables tracing.
-- Add [`etcd --experimental-distributed-tracing-address`](https://github.com/etcd-io/etcd/pull/12919) string flag which allows configuring the OpenTelemetry collector address.
-- Add [`etcd --experimental-distributed-tracing-service-name`](https://github.com/etcd-io/etcd/pull/12919) string flag which allows changing the default "etcd" service name.
-- Add [`etcd --experimental-distributed-tracing-instance-id`](https://github.com/etcd-io/etcd/pull/12919) string flag which configures an instance ID, which must be unique per etcd instance.
-- Add [`--experimental-bootstrap-defrag-threshold-megabytes`](https://github.com/etcd-io/etcd/pull/12941) which configures a threshold for the unused db size and etcdserver will automatically perform defragmentation on bootstrap when it exceeds this value. The functionality is disabled if the value is 0.
-
-### Package `runtime`
-
-- Optimize [`runtime.FDUsage` by removing unnecessary sorting](https://github.com/etcd-io/etcd/pull/12214).
-
-### Package `embed`
-
-- Remove [`embed.Config.Debug`](https://github.com/etcd-io/etcd/pull/10947).
-  - Use `embed.Config.LogLevel` instead.
-- Add [`embed.Config.ZapLoggerBuilder`](https://github.com/etcd-io/etcd/pull/11147) to allow creating a custom zap logger.
-- Replace [global `*zap.Logger` with etcd server logger object](https://github.com/etcd-io/etcd/pull/12212).
-- Add [`embed.Config.EnableLogRotation`](https://github.com/etcd-io/etcd/pull/12774) which enables log rotation if true.
-- Add [`embed.Config.LogRotationConfigJSON`](https://github.com/etcd-io/etcd/pull/12774) to allow passthrough of JSON config to configure log rotation for a file output target.
-- Add [`embed.Config.ExperimentalEnableDistributedTracing`](https://github.com/etcd-io/etcd/pull/12919) which enables experimental distributed tracing if true.
-- Add [`embed.Config.ExperimentalDistributedTracingAddress`](https://github.com/etcd-io/etcd/pull/12919) which allows overriding default collector address.
-- Add [`embed.Config.ExperimentalDistributedTracingServiceName`](https://github.com/etcd-io/etcd/pull/12919) which allows overriding default "etcd" service name.
-- Add [`embed.Config.ExperimentalDistributedTracingServiceInstanceID`](https://github.com/etcd-io/etcd/pull/12919) which allows configuring an instance ID, which must be uniquer per etcd instance.
-
-### Package `clientv3`
-
-- Remove [excessive watch cancel logging messages](https://github.com/etcd-io/etcd/pull/12187).
-  - See [kubernetes/kubernetes#93450](https://github.com/kubernetes/kubernetes/issues/93450).
-- Add [`TryLock`](https://github.com/etcd-io/etcd/pull/11104) method to `clientv3/concurrency/Mutex`. A non-blocking method on `Mutex` which does not wait to get lock on the Mutex, returns immediately if Mutex is locked by another session.
-- Fix [client balancer failover against multiple endpoints](https://github.com/etcd-io/etcd/pull/11184).
-  - Fix [`"kube-apiserver: failover on multi-member etcd cluster fails certificate check on DNS mismatch"`](https://github.com/kubernetes/kubernetes/issues/83028).
-- Fix [IPv6 endpoint parsing in client](https://github.com/etcd-io/etcd/pull/11211).
-  - Fix ["1.16: etcd client does not parse IPv6 addresses correctly when members are joining" (kubernetes#83550)](https://github.com/kubernetes/kubernetes/issues/83550).
-- Fix [errors caused by grpc changing balancer/resolver API](https://github.com/etcd-io/etcd/pull/11564). This change is compatible with grpc >= [v1.26.0](https://github.com/grpc/grpc-go/releases/tag/v1.26.0), but is not compatible with < v1.26.0 version.
-- Use [ServerName as the authority](https://github.com/etcd-io/etcd/pull/11574) after bumping to grpc v1.26.0. Remove workaround in [#11184](https://github.com/etcd-io/etcd/pull/11184).
-- Fix [`"hasleader"` metadata embedding](https://github.com/etcd-io/etcd/pull/11687).
-  - Previously, `clientv3.WithRequireLeader(ctx)` was overwriting existing context keys.
-- Fix [watch leak caused by lazy cancellation](https://github.com/etcd-io/etcd/pull/11850). When clients cancel their watches, a cancel request will now be immediately sent to the server instead of waiting for the next watch event.
-- Make sure [save snapshot downloads checksum for integrity checks](https://github.com/etcd-io/etcd/pull/11896).
-- Fix [auth token invalid after watch reconnects](https://github.com/etcd-io/etcd/pull/12264). Get AuthToken automatically when clientConn is ready.
-- Improve [clientv3:get AuthToken gracefully without extra connection](https://github.com/etcd-io/etcd/pull/12165).
-- Changed [clientv3 dialing code](https://github.com/etcd-io/etcd/pull/12671) to use grpc resolver API instead of custom balancer.
-  - Endpoints self identify now as `etcd-endpoints://{id}/#initially={list of endpoints}` e.g. `etcd-endpoints://0xc0009d8540/#initially=[localhost:2079]`
-- Make sure [save snapshot downloads checksum for integrity checks](https://github.com/etcd-io/etcd/pull/11896).
-
-### Package `lease`
-
-- Fix [memory leak in follower nodes](https://github.com/etcd-io/etcd/pull/11731).
-  - https://github.com/etcd-io/etcd/issues/11495
-  - https://github.com/etcd-io/etcd/issues/11730
-- Make sure [grant/revoke won't be applied repeatedly after restarting etcd](https://github.com/etcd-io/etcd/pull/11935).
-
-### Package `wal`
-
-- Add [`etcd_wal_write_bytes_total`](https://github.com/etcd-io/etcd/pull/11738).
-- Handle [out-of-range slice bound in `ReadAll` and entry limit in `decodeRecord`](https://github.com/etcd-io/etcd/pull/11793).
-
-### etcdctl v3
-
-- Fix `etcdctl member add` command to prevent potential timeout. ([PR#11194](https://github.com/etcd-io/etcd/pull/11194) and [PR#11638](https://github.com/etcd-io/etcd/pull/11638))
-- Add [`etcdctl watch --progress-notify`](https://github.com/etcd-io/etcd/pull/11462) flag.
-- Add [`etcdctl auth status`](https://github.com/etcd-io/etcd/pull/11536) command to check if authentication is enabled
-- Add [`etcdctl get --count-only`](https://github.com/etcd-io/etcd/pull/11743) flag for output type `fields`.
-- Add [`etcdctl member list -w=json --hex`](https://github.com/etcd-io/etcd/pull/11812) flag to print memberListResponse in hex format json.
-- Changed [`etcdctl lock <lockname> exec-command`](https://github.com/etcd-io/etcd/pull/12829) to return exit code of exec-command.
-- [New tool: `etcdutl`](https://github.com/etcd-io/etcd/pull/12971) incorporated functionality of: `etcdctl snapshot status|restore`, `etcdctl backup`, `etcdctl defrag --data-dir ...`.
-- [ETCDCTL_API=3 `etcdctl migrate`](https://github.com/etcd-io/etcd/pull/12971) has been decommissioned. Use etcd <=v3.4 to restore v2 storage.
-
-### gRPC gateway
-
-- [gRPC gateway](https://github.com/grpc-ecosystem/grpc-gateway) only supports [`/v3`](TODO) endpoint.
-  - Deprecated [`/v3beta`](https://github.com/etcd-io/etcd/pull/9298).
-  - `curl -L http://localhost:2379/v3beta/kv/put -X POST -d '{"key": "Zm9v", "value": "YmFy"}'` does work in v3.5. Use `curl -L http://localhost:2379/v3/kv/put -X POST -d '{"key": "Zm9v", "value": "YmFy"}'` instead.
-- Set [`enable-grpc-gateway`](https://github.com/etcd-io/etcd/pull/12297) flag to true when using a config file to keep the defaults the same as the command line configuration.
-
-### gRPC Proxy
-
-- Fix [`panic on error`](https://github.com/etcd-io/etcd/pull/11694) for metrics handler.
-- Add [gRPC keepalive related flags](https://github.com/etcd-io/etcd/pull/11711) `grpc-keepalive-min-time`, `grpc-keepalive-interval` and `grpc-keepalive-timeout`.
-- [Fix grpc watch proxy hangs when failed to cancel a watcher](https://github.com/etcd-io/etcd/pull/12030) .
-- Add [metrics handler for grpcproxy self](https://github.com/etcd-io/etcd/pull/12107).
-- Add [health handler for grpcproxy self](https://github.com/etcd-io/etcd/pull/12114).
-
-### Auth
-
-- Fix [NoPassword check when adding user through GRPC gateway](https://github.com/etcd-io/etcd/pull/11418) ([issue#11414](https://github.com/etcd-io/etcd/issues/11414))
-- Fix bug where [some auth related messages are logged at wrong level](https://github.com/etcd-io/etcd/pull/11586)
-- [Fix a data corruption bug by saving consistent index](https://github.com/etcd-io/etcd/pull/11652).
-- [Improve checkPassword performance](https://github.com/etcd-io/etcd/pull/11735).
-- [Add authRevision field in AuthStatus](https://github.com/etcd-io/etcd/pull/11659).
-- Fix [a bug of not refreshing expired tokens](https://github.com/etcd-io/etcd/pull/13308).
-- 
-### API
-
-- Add [`/v3/auth/status`](https://github.com/etcd-io/etcd/pull/11536) endpoint to check if authentication is enabled
-- [Add `Linearizable` field to `etcdserverpb.MemberListRequest`](https://github.com/etcd-io/etcd/pull/11639).
-- [Learner support Snapshot RPC](https://github.com/etcd-io/etcd/pull/12890/).
-
-### Package `netutil`
-
-- Remove [`netutil.DropPort/RecoverPort/SetLatency/RemoveLatency`](https://github.com/etcd-io/etcd/pull/12491).
-  - These are not used anymore. They were only used for older versions of functional testing.
-  - Removed to adhere to best security practices, minimize arbitrary shell invocation.
-
-### `tools/etcd-dump-metrics`
-
-- Implement [input validation to prevent arbitrary shell invocation](https://github.com/etcd-io/etcd/pull/12491).
-
-### Dependency
-
-- Upgrade [`google.golang.org/grpc`](https://github.com/grpc/grpc-go/releases) from [**`v1.23.0`**](https://github.com/grpc/grpc-go/releases/tag/v1.23.0) to [**`v1.37.0`**](https://github.com/grpc/grpc-go/releases/tag/v1.37.0).
-- Upgrade [`go.uber.org/zap`](https://github.com/uber-go/zap/releases) from [**`v1.14.1`**](https://github.com/uber-go/zap/releases/tag/v1.14.1) to [**`v1.16.0`**](https://github.com/uber-go/zap/releases/tag/v1.16.0).
-
-### Platforms
-
-- etcd now [officially supports `arm64`](https://github.com/etcd-io/etcd/pull/12929).
-  - See https://github.com/etcd-io/etcd/pull/12928 for adding automated tests with `arm64` EC2 instances (Graviton 2).
-  - See https://github.com/etcd-io/website/pull/273 for new platform support tier policies.
-
-### Release
-
-- Add s390x build support ([PR#11548](https://github.com/etcd-io/etcd/pull/11548) and [PR#11358](https://github.com/etcd-io/etcd/pull/11358))
-
-### Go
-
-- Require [*Go 1.16+*](https://github.com/etcd-io/etcd/pull/11110).
-- Compile with [*Go 1.16+*](https://golang.org/doc/devel/release.html#go1.16)
-- etcd uses [go modules](https://github.com/etcd-io/etcd/pull/12279) (instead of vendor dir) to track dependencies.
-
-### Project Governance
-
-- The etcd team has added, a well defined and openly discussed, project [governance](https://github.com/etcd-io/etcd/pull/11175).
-
-
-<hr>
-

CHANGELOG/CHANGELOG-3.6.md

@@ -1,103 +0,0 @@
-
-
-Previous change logs can be found at [CHANGELOG-3.5](https://github.com/etcd-io/etcd/blob/main/CHANGELOG/CHANGELOG-3.5.md).
-
-<hr>
-
-## v3.6.0 (TBD)
-
-See [code changes](https://github.com/etcd-io/etcd/compare/v3.5.0...v3.6.0).
-
-### Breaking Changes
-
-- `etcd` will no longer start on data dir created by newer versions (for example etcd v3.6 will not run on v3.7+ data dir). To downgrade data dir please check out `etcdutl migrate` command.
-- `etcd` doesn't support serving client requests on the peer listen endpoints (--listen-peer-urls). See [pull/13565](https://github.com/etcd-io/etcd/pull/13565).
-- `etcdctl` will sleep(2s) in case of range delete without `--range` flag. See [pull/13747](https://github.com/etcd-io/etcd/pull/13747)
-- Applications which depend on etcd v3.6 packages must be built with go version >= v1.18.
-
-### Deprecations
-
-- Deprecated [V2 discovery](https://etcd.io/docs/v3.5/dev-internal/discovery_protocol/).
-- Deprecated [SetKeepAlive and SetKeepAlivePeriod in limitListenerConn](https://github.com/etcd-io/etcd/pull/14356).
-- Removed [etcdctl defrag --data-dir](https://github.com/etcd-io/etcd/pull/13793).
-- Removed [etcdctl snapshot status](https://github.com/etcd-io/etcd/pull/13809).
-- Removed [etcdctl snapshot restore](https://github.com/etcd-io/etcd/pull/13809).
-- Removed [etcdutl snapshot save](https://github.com/etcd-io/etcd/pull/13809).
-
-
-### etcdctl v3
-
-- Add command to generate [shell completion](https://github.com/etcd-io/etcd/pull/13133).
-- When print endpoint status, [show db size in use](https://github.com/etcd-io/etcd/pull/13639)
-- [Always print the raft_term in decimal](https://github.com/etcd-io/etcd/pull/13711) when displaying member list in json.
-- [Add one more field `storageVersion`](https://github.com/etcd-io/etcd/pull/13773) into the response of command `etcdctl endpoint status`.
-- Add [`--max-txn-ops`](https://github.com/etcd-io/etcd/pull/14340) flag to make-mirror command.
-- Add [`--consistency`](https://github.com/etcd-io/etcd/pull/15261) flag to member list command.
-- Display [field `hash_revision`](https://github.com/etcd-io/etcd/pull/14812) for `etcdctl endpoint hash` command.
-
-### etcdutl v3
-
-- Add command to generate [shell completion](https://github.com/etcd-io/etcd/pull/13142).
-- Add `migrate` command for downgrading/upgrading etcd data dir files.
-
-### Package `clientv3`
-
-- [Support serializable `MemberList` operation](https://github.com/etcd-io/etcd/pull/15261).
-
-### Package `server`
-
-- Package `mvcc` was moved to `storage/mvcc`
-- Package `mvcc/backend` was moved to `storage/backend`
-- Package `mvcc/buckets` was moved to `storage/schema`
-- Package `wal` was moved to `storage/wal`
-- Package `datadir` was moved to `storage/datadir`
-
-### Package `raft`
-- Send empty `MsgApp` when entry in-flight limits are exceeded. See [pull/14633](https://github.com/etcd-io/etcd/pull/14633).
-- Add [MaxInflightBytes](https://github.com/etcd-io/etcd/pull/14624) setting in `raft.Config` for better flow control of entries.
-- [Decouple raft from etcd](https://github.com/etcd-io/etcd/issues/14713). Migrated raft to a separate [repository](https://github.com/etcd-io/raft), and renamed raft module to `go.etcd.io/raft/v3`.
-
-### etcd server
-
-- Add [`etcd --log-format`](https://github.com/etcd-io/etcd/pull/13339) flag to support log format.
-- Add [`etcd --experimental-max-learners`](https://github.com/etcd-io/etcd/pull/13377) flag to allow configuration of learner max membership.
-- Add [`etcd --experimental-enable-lease-checkpoint-persist`](https://github.com/etcd-io/etcd/pull/13508) flag to handle upgrade from v3.5.2 clusters with this feature enabled.
-- Add [`etcdctl make-mirror --rev`](https://github.com/etcd-io/etcd/pull/13519) flag to support incremental mirror.
-- Add [`etcd --experimental-wait-cluster-ready-timeout`](https://github.com/etcd-io/etcd/pull/13525) flag to wait for cluster to be ready before serving client requests.
-- Add [v3 discovery](https://github.com/etcd-io/etcd/pull/13635) to bootstrap a new etcd cluster.
-- Add [field `storage`](https://github.com/etcd-io/etcd/pull/13772) into the response body of endpoint `/version`.
-- Add [`etcd --max-concurrent-streams`](https://github.com/etcd-io/etcd/pull/14169) flag to configure the max concurrent streams each client can open at a time, and defaults to math.MaxUint32.
-- Add [`etcd grpc-proxy --experimental-enable-grpc-logging`](https://github.com/etcd-io/etcd/pull/14266) flag to logging all grpc requests and responses.
-- Add [`etcd --experimental-compact-hash-check-enabled --experimental-compact-hash-check-time`](https://github.com/etcd-io/etcd/issues/14039) flags to support enabling reliable corruption detection on compacted revisions.
-- Add [Protection on maintenance request when auth is enabled](https://github.com/etcd-io/etcd/pull/14663).
-- Graduated [`--experimental-warning-unary-request-duration` to `--warning-unary-request-duration`](https://github.com/etcd-io/etcd/pull/14414). Note the experimental flag is deprecated and will be decommissioned in v3.7.
-- Add [field `hash_revision` into `HashKVResponse`](https://github.com/etcd-io/etcd/pull/14537).
-- Add [`etcd --experimental-snapshot-catch-up-entries`](https://github.com/etcd-io/etcd/pull/15033) flag to configure number of entries for a slow follower to catch up after compacting the the raft storage entries and defaults to 5k. 
-- Decreased [`--snapshot-count` default value from 100,000 to 10,000](https://github.com/etcd-io/etcd/pull/15408)
-- Add [`etcd --tls-min-version --tls-max-version`](https://github.com/etcd-io/etcd/pull/15156) to enable support for TLS 1.3.
-
-### etcd grpc-proxy
-
-- Add [`etcd grpc-proxy start --endpoints-auto-sync-interval`](https://github.com/etcd-io/etcd/pull/14354) flag to enable and configure interval of auto sync of endpoints with server.
-- Add [`etcd grpc-proxy start --listen-cipher-suites`](https://github.com/etcd-io/etcd/pull/14308) flag to support adding configurable cipher list.
-
-### tools/benchmark
-
-- [Add etcd client autoSync flag](https://github.com/etcd-io/etcd/pull/13416)
-
-### Metrics, Monitoring
-
-See [List of metrics](https://etcd.io/docs/latest/metrics/) for all metrics per release.
-
-- Add [`etcd_disk_defrag_inflight`](https://github.com/etcd-io/etcd/pull/13371).
-- Add [`etcd_debugging_server_alarms`](https://github.com/etcd-io/etcd/pull/14276).
-
-### Go
-- Require [Go 1.19+](https://github.com/etcd-io/etcd/pull/14463).
-- Compile with [Go 1.19+](https://golang.org/doc/devel/release.html#go1.19). Please refer to [gc-guide](https://go.dev/doc/gc-guide) to configure `GOGC` and `GOMEMLIMIT` properly. 
-
-### Other
-
-- Use Distroless as base image to make the image less vulnerable and reduce image size.
-
-<hr>

CHANGELOG/CHANGELOG-4.0.md

@@ -1,44 +0,0 @@
-
-
-Previous change logs can be found at [CHANGELOG-3.x](https://github.com/etcd-io/etcd/blob/main/CHANGELOG/CHANGELOG-3.x.md).
-
-<hr>
-
-## v4.0.0 (TBD)
-
-See [code changes](https://github.com/etcd-io/etcd/compare/v3.5.0...v4.0.0) and [v4.0 upgrade guide](https://etcd.io/docs/latest/upgrades/upgrade_4_0/) for any breaking changes.
-
-**Again, before running upgrades from any previous release, please make sure to read change logs below and [v4.0 upgrade guide](https://etcd.io/docs/latest/upgrades/upgrade_4_0/).**
-
-### Breaking Changes
-
-- [Secure etcd by default](https://github.com/etcd-io/etcd/issues/9475)?
-- Deprecate [`etcd --proxy*`](TODO) flags; **no more v2 proxy**.
-- Deprecate [v2 storage backend](https://github.com/etcd-io/etcd/issues/9232); **no more v2 store**.
-  - v2 API is still supported via [v2 emulation](TODO).
-- Deprecate [`etcdctl backup`](TODO) command.
-- `clientv3.Client.KeepAlive(ctx context.Context, id LeaseID) (<-chan *LeaseKeepAliveResponse, error)` is now [`clientv4.Client.KeepAlive(ctx context.Context, id LeaseID) <-chan *LeaseKeepAliveResponse`](TODO).
-  - Similar to `Watch`, [`KeepAlive` does not return errors](https://github.com/etcd-io/etcd/issues/7488).
-  - If there's an unknown server error, kill all open channels and create a new stream on the next `KeepAlive` call.
-- Rename `github.com/coreos/client` to `github.com/coreos/clientv2`.
-- [`etcd --experimental-initial-corrupt-check`](TODO) has been  deprecated.
-  - Use [`etcd --initial-corrupt-check`](TODO) instead.
-- [`etcd --experimental-corrupt-check-time`](TODO) has been  deprecated.
-  - Use [`etcd --corrupt-check-time`](TODO) instead.
-- Enable TLS 1.13, deprecate TLS cipher suites.
-
-### etcd server
-
-- [`etcd --initial-corrupt-check`](TODO) flag is now stable (`etcd --experimental-initial-corrupt-check` has been  deprecated).
-  - `etcd --initial-corrupt-check=true` by default, to check cluster database hashes before serving client/peer traffic.
-- [`etcd --corrupt-check-time`](TODO) flag is now stable (`etcd --experimental-corrupt-check-time` has been  deprecated).
-  - `etcd --corrupt-check-time=12h` by default, to check cluster database hashes for every 12-hour.
-- Enable TLS 1.13, deprecate TLS cipher suites.
-
-### Go
-
-- Require [*Go 2*](https://blog.golang.org/go2draft).
-
-
-<hr>
-

CHANGELOG/README.md

@@ -1,21 +0,0 @@
-# Change logs
-
-## Production recommendation
-
-The minimum recommended etcd versions to run in **production** are v3.4.22+ and v3.5.6+. Refer to the [versioning policy](https://etcd.io/docs/v3.5/op-guide/versioning/) for more details.
-
-### v3.5 data corruption issue 
-
-Running etcd v3.5.2, v3.5.1 and v3.5.0 under high load can cause a data corruption issue.
-If etcd process is killed, occasionally some committed transactions are not reflected on all the members.
-Recommendation is to upgrade to v3.5.4+.
-
-If you have encountered data corruption, please follow instructions on https://etcd.io/docs/v3.5/op-guide/data_corruption/.
-
-## Change log rules
-1. Each patch release only includes changes against previous patch release.
-For example, the change log of v3.5.5 should only include items which are new to v3.5.4.
-2. For the first release (e.g. 3.4.0, 3.5.0, 3.6.0, 4.0.0 etc.) for each minor or major 
-version, it only includes changes which are new to the first release of previous minor
-or major version. For example, v3.5.0 should only include items which are new to v3.4.0,
-and v3.6.0 should only include items which are new to v3.5.0.

CONTRIBUTING.md

@@ -1,148 +1,70 @@
 # How to contribute
 
-etcd is Apache 2.0 licensed and accepts contributions via GitHub pull requests.
-This document outlines basics of contributing to etcd.
+etcd is Apache 2.0 licensed and accepts contributions via GitHub pull requests. This document outlines some of the conventions on commit message formatting, contact points for developers and other resources to make getting your contribution into etcd easier.
+
+# Email and chat
+
+- Email: [etcd-dev](https://groups.google.com/forum/?hl=en#!forum/etcd-dev)
+- IRC: #[coreos](irc://irc.freenode.org:6667/#coreos) IRC channel on freenode.org
+
+## Getting started
+
+- Fork the repository on GitHub
+- Read the README.md for build instructions
+
+## Reporting bugs and creating issues
+
+Reporting bugs is one of the best ways to contribute. However, a good bug report
+has some very specific qualities, so please read over our short document on
+[reporting bugs](https://github.com/coreos/etcd/blob/master/Documentation/reporting_bugs.md)
+before you submit your bug report. This document might contain links known
+issues, another good reason to take a look there, before reporting your bug.
+
+## Contribution flow
 
 This is a rough outline of what a contributor's workflow looks like:
-* [Find something to work on](#Find-something-to-work-on)
-* [Setup development environment](#Setup-development-environment)
-* [Implement your change](#Implement-your-change)
-* [Commit your change](#Commit-your-change)
-* [Create a pull request](#Create-a-pull-request)
-* [Get your pull request reviewed](#Get-your-pull-request-reviewed)
 
-If you have any questions about, please reach out using one of the methods listed in [contact].
+- Create a topic branch from where you want to base your work. This is usually master.
+- Make commits of logical units.
+- Make sure your commit messages are in the proper format (see below).
+- Push your changes to a topic branch in your fork of the repository.
+- Submit a pull request to coreos/etcd.
+- Your PR must receive a LGTM from two maintainers found in the MAINTAINERS file.
 
-[contact]: ./README.md#Contact
+Thanks for your contributions!
 
-## Learn more about etcd
+### Code style
 
-Before making a change please look through resources below to learn more about etcd and tools used for development.
+The coding style suggested by the Golang community is used in etcd. See the [style doc](https://github.com/golang/go/wiki/CodeReviewComments) for details.
 
-* Please learn about [Git](https://github.com/git-guides) version control system used in etcd.
-* Read the [etcd learning resources](https://etcd.io/docs/v3.5/learning/)
-* Read the [etcd community membership](/Documentation/contributor-guide/community-membership.md)
-* Watch [etcd deep dive](https://www.youtube.com/watch?v=D2pm6ufIt98&t=927s)
-* Watch [etcd code walk through](https://www.youtube.com/watch?v=H3XaSF6wF7w)
+Please follow this style to make etcd easy to review, maintain and develop.
 
-## Find something to work on
+### Format of the commit message
 
-All the work in etcd project is tracked in [github issue tracker].
-Issues should be properly labeled making it easy to find something for you.
+We follow a rough convention for commit messages that is designed to answer two
+questions: what changed and why. The subject line should feature the what and
+the body of the commit should describe the why.
 
-Depending on your interest and experience you should check different labels:
-* If you are just starting, check issues labeled with [good first issue].
-* When you feel more conformable in your contributions, checkout [help wanted].
-* Advanced contributors can try to help with issues labeled [priority/important] covering most relevant work at the time.
+```
+scripts: add the test-cluster command
 
-If any of aforementioned labels don't have unassigned issues, please [contact] one of the [maintainers] asking to triage more issues.
+this uses tmux to setup a test cluster that you can easily kill and
+start for debugging.
 
-[github issue tracker]: https://github.com/etcd-io/etcd/issues
-[good first issue]: https://github.com/etcd-io/etcd/labels/good%20first%20issue
-[help wanted]: https://github.com/etcd-io/etcd/labels/help%20wanted
-[maintainers]: https://github.com/etcd-io/etcd/blob/main/MAINTAINERS
-[priority/important]: https://github.com/etcd-io/etcd/labels/priority%2Fimportant
-
-## Setup development environment
-
-The etcd project supports two options for development:
-
- 1. Manually setup local environment.
- 2. Automatically setup [devcontainer](https://containers.dev).
-
-For both options the only supported architecture is `linux-amd64`. Bug reports for other environments will generally be ignored. Supporting new environments requires introduction of proper tests and mainter support that is currently lacking in the etcd project.
-
-If you would like etcd to support your preferred environment you can [file an issue].
-
-### Option 1 - Manually setup local environment
-
-This is the original etcd development environment, is most supported and is backwards compatible for development of older etcd versions.
-
-Follow the steps below to setup the environment:
-
-- [Clone the repository](https://docs.github.com/en/repositories/creating-and-managing-repositories/cloning-a-repository)
-- Install Go by following [installation](https://go.dev/doc/install). Please check minimal go version in [go.mod file](./go.mod#L3).
-- Install build tools (`make`):
-  - For debian based distributions you can run `sudo apt-get install build-essential`
-- Verify that everything is installed by running `make build`
-
-Note: `make build` runs with `-v`. Other build flags can be added through env `GO_BUILD_FLAGS`, **if required**. Eg.,
-```console
-GO_BUILD_FLAGS="-buildmode=pie" make build
+Fixes #38
 ```
 
-### Option 2 - Automatically setup devcontainer
+The format can be described more formally as follows:
 
-This is a more recently added environmnent that aims to make it faster for new contributors to get started with etcd. This option is supported for etcd versions 3.6 onwards.
-
-This option can be [used locally](https://code.visualstudio.com/docs/devcontainers/tutorial) on a system running Visual Studio Code and Docker, or in a remote cloud based [Codespaces](https://github.com/features/codespaces) environment.
-
-To get started, create a codespace for this repository by clicking this 👇
-
-[![Open in GitHub Codespaces](https://github.com/codespaces/badge.svg)](https://github.com/codespaces/new?hide_repo_select=true&ref=main&repo=11225014)
-
-A codespace will open in a web-based version of Visual Studio Code. The [dev container](.devcontainer/devcontainer.json) is fully configured with software needed for this project.
-
-**Note**: Dev containers is an open spec which is supported by [GitHub Codespaces](https://github.com/codespaces) and [other tools](https://containers.dev/supporting).
-
-[file an issue]: https://github.com/etcd-io/etcd/issues/new/choose
-
-## Implement your change
-
-etcd code should follow coding style suggested by the Golang community.
-See the [style doc](https://github.com/golang/go/wiki/CodeReviewComments) for details.
-
-Please ensure that your change passes static analysis (requires [golangci-lint](https://golangci-lint.run/usage/install/)):
-- `make verify` to verify if all checks pass.
-- `make verify-*` to verify a single check, for example `make verify-bom` to verify if bill-of-materials.json file is up-to-date.
-- `make fix` to fix all checks.
-- `make fix-*` to fix a single checks, for example `make fix-bom` to update bill-of-materials.json.
-
-Please ensure that your change passes tests.
-- `make test-unit` to run unit tests.
-- `make test-integration` to run integration tests.
-- `make test-e2e` to run e2e tests.
-
-All changes are expected to come with unit test.
-All new features are expected to have either e2e or integration tests.
-
-## Commit your change
-
-etcd follows a rough convention for commit messages:
-* First line:
-  * Should start name of package (for example `etcdserver`, `etcdctl`) followed by `:` character.
-  * Describe the `what` behind the change
-* Optionally author might provide the `why` behind the change in the main commit message body.
-* Last line should be `Signed-off-by: firstname lastname <email@example.com>` (can be automatically generate by providing `--signoff` to git commit command).
-
-Example of commit message:
 ```
-etcdserver: add grpc interceptor to log info on incoming requests
-
-To improve debuggability of etcd v3. Added a grpc interceptor to log
-info on incoming requests to etcd server. The log output includes
-remote client info, request content (with value field redacted), request
-handling latency, response size, etc. Uses zap logger if available,
-otherwise uses capnslog.
-
-Signed-off-by: FirstName LastName <github@github.com>
+<subsystem>: <what changed>
+<BLANK LINE>
+<why this change was made>
+<BLANK LINE>
+<footer>
 ```
 
-## Create a pull request
-
-Please follow [making a pull request](https://docs.github.com/en/get-started/quickstart/contributing-to-projects#making-a-pull-request) guide.
-
-If you are still working on the pull request, you can convert it to draft by clicking `Convert to draft` link just below list of reviewers.
-
-Multiple small PRs are preferred over single large ones (>500 lines of code).
-
-## Get your pull request reviewed
-
-Before requesting review please ensure that all GitHub checks were successful.
-It might happen that some unrelated tests on your PR are failing, due to their flakiness.
-In such cases please [file an issue] to deflake the problematic test and ask one of [maintainers] to rerun the tests.
-
-If all checks were successful feel free to reach out for review from people that were involved in the original discussion or [maintainers].
-Depending on complexity of the PR it might require between 1 and 2 maintainers to approve your change before merging.
-
-Thanks for contributing!
+The first line is the subject and should be no longer than 70 characters, the
+second line is always blank, and other lines should be wrapped at 80 characters.
+This allows the message to be easier to read on GitHub as well as in various
+git tools.

Dockerfile

@@ -1,14 +1,6 @@
-ARG ARCH=amd64
-FROM --platform=linux/${ARCH} gcr.io/distroless/static-debian11
-
-ADD etcd /usr/local/bin/
-ADD etcdctl /usr/local/bin/
-ADD etcdutl /usr/local/bin/
-
-WORKDIR /var/etcd/
-WORKDIR /var/lib/etcd/
-
+FROM golang
+ADD . /go/src/github.com/coreos/etcd
+ADD cmd/vendor /go/src/github.com/coreos/etcd/vendor
+RUN go install github.com/coreos/etcd
 EXPOSE 2379 2380
-
-# Define default command.
-CMD ["/usr/local/bin/etcd"]
+ENTRYPOINT ["etcd"]

Dockerfile-release

@@ -0,0 +1,11 @@
+FROM alpine:latest
+
+ADD etcd /usr/local/bin/
+ADD etcdctl /usr/local/bin/
+RUN mkdir -p /var/etcd/
+RUN mkdir -p /var/lib/etcd/
+
+EXPOSE 2379 2380
+
+# Define default command.
+CMD ["/usr/local/bin/etcd"]

Documentation/README.md

@@ -1,4 +0,0 @@
-This directory includes etcd project internal documentation for new and existing contributors.
-
-For user and developer documentation please go to [etcd.io](https://etcd.io/),
-which is developed in [website](https://github.com/etcd-io/website/) repo.

Documentation/benchmarks/README.md

@@ -0,0 +1,18 @@
+# Benchmarks
+
+etcd benchmarks will be published regularly and tracked for each release below:
+
+- [etcd v2.1.0-alpha][2.1]
+- [etcd v2.2.0-rc][2.2]
+- [etcd v3 demo][3.0]
+
+# Memory Usage Benchmarks
+
+It records expected memory usage in different scenarios.
+
+- [etcd v2.2.0-rc][2.2-mem]
+
+[2.1]: etcd-2-1-0-alpha-benchmarks.md
+[2.2]: etcd-2-2-0-rc-benchmarks.md
+[2.2-mem]: etcd-2-2-0-rc-memory-benchmarks.md
+[3.0]: etcd-3-demo-benchmarks.md

Documentation/benchmarks/etcd-2-1-0-alpha-benchmarks.md

@@ -0,0 +1,52 @@
+## Physical machines
+
+GCE n1-highcpu-2 machine type
+
+- 1x dedicated local SSD mounted under /var/lib/etcd
+- 1x dedicated slow disk for the OS
+- 1.8 GB memory
+- 2x CPUs
+- etcd version 2.1.0 alpha
+
+## etcd Cluster
+
+3 etcd members, each runs on a single machine
+
+## Testing
+
+Bootstrap another machine and use the [boom HTTP benchmark tool][boom] to send requests to each etcd member. Check the [benchmark hacking guide][hack-benchmark] for detailed instructions.
+
+## Performance
+
+### reading one single key
+
+| key size in bytes | number of clients | target etcd server | read QPS | 90th Percentile Latency (ms) |
+|-------------------|-------------------|--------------------|----------|---------------|
+| 64                | 1                 | leader only        | 1534     | 0.7        |
+| 64                | 64                | leader only        | 10125    | 9.1      |
+| 64                | 256               | leader only        | 13892    | 27.1      |
+| 256               | 1                 | leader only        | 1530     | 0.8       |
+| 256               | 64                | leader only        | 10106    | 10.1      |
+| 256               | 256               | leader only        | 14667    | 27.0      |
+| 64                | 64                | all servers        | 24200    | 3.9      |
+| 64                | 256               | all servers        | 33300    | 11.8      |
+| 256               | 64                | all servers        | 24800    | 3.9      |
+| 256               | 256               | all servers        | 33000    | 11.5      |
+
+### writing one single key
+
+| key size in bytes | number of clients | target etcd server | write QPS | 90th Percentile Latency (ms) |
+|-------------------|-------------------|--------------------|-----------|---------------|
+| 64                | 1                 | leader only        | 60        | 21.4 |
+| 64                | 64                | leader only        | 1742      | 46.8 |
+| 64                | 256               | leader only        | 3982      | 90.5 |
+| 256               | 1                 | leader only        | 58        | 20.3 |
+| 256               | 64                | leader only        | 1770      | 47.8 |
+| 256               | 256               | leader only        | 4157      | 105.3 |
+| 64                | 64                | all servers        | 1028      | 123.4 |
+| 64                | 256               | all servers        | 3260      | 123.8 |
+| 256               | 64                | all servers        | 1033      | 121.5 |
+| 256               | 256               | all servers        | 3061      | 119.3 |
+
+[boom]: https://github.com/rakyll/boom
+[hack-benchmark]: /hack/benchmark/

Documentation/benchmarks/etcd-2-2-0-benchmarks.md

@@ -0,0 +1,69 @@
+# Benchmarking etcd v2.2.0
+
+## Physical Machines
+
+GCE n1-highcpu-2 machine type
+
+- 1x dedicated local SSD mounted as etcd data directory
+- 1x dedicated slow disk for the OS
+- 1.8 GB memory
+- 2x CPUs
+
+## etcd Cluster
+
+3 etcd 2.2.0 members, each runs on a single machine.
+
+Detailed versions:
+
+```
+etcd Version: 2.2.0
+Git SHA: e4561dd
+Go Version: go1.5
+Go OS/Arch: linux/amd64
+```
+
+## Testing
+
+Bootstrap another machine, outside of the etcd cluster, and run the [`boom` HTTP benchmark tool](https://github.com/rakyll/boom) with a connection reuse patch to send requests to each etcd cluster member. See the [benchmark instructions](../../hack/benchmark/) for the patch and the steps to reproduce our procedures.
+
+The performance is calulated through results of 100 benchmark rounds.
+
+## Performance
+
+### Single Key Read Performance
+
+| key size in bytes | number of clients | target etcd server | average read QPS | read QPS stddev | average 90th Percentile Latency (ms) | latency stddev |
+|-------------------|-------------------|--------------------|------------------|-----------------|--------------------------------------|----------------|
+| 64 | 1 | leader only | 2303 | 200 | 0.49 | 0.06 |
+| 64 | 64 | leader only | 15048 | 685 | 7.60 | 0.46 |
+| 64 | 256 | leader only | 14508 | 434 | 29.76 | 1.05 |
+| 256 | 1 | leader only | 2162 | 214 | 0.52 | 0.06 |
+| 256 | 64 | leader only | 14789 | 792 | 7.69| 0.48 |
+| 256 | 256 | leader only | 14424 | 512 | 29.92 | 1.42 |
+| 64 | 64 | all servers | 45752 | 2048 | 2.47 | 0.14 |
+| 64 | 256 | all servers | 46592 | 1273 | 10.14 | 0.59 |
+| 256 | 64 | all servers | 45332 | 1847 | 2.48| 0.12 |
+| 256 | 256 | all servers | 46485 | 1340 | 10.18 | 0.74 |
+
+### Single Key Write Performance
+
+| key size in bytes | number of clients | target etcd server | average write QPS | write QPS stddev | average 90th Percentile Latency (ms) | latency stddev |
+|-------------------|-------------------|--------------------|------------------|-----------------|--------------------------------------|----------------|
+| 64 | 1 | leader only | 55 | 4 | 24.51 | 13.26 |
+| 64 | 64 | leader only | 2139 | 125 | 35.23 | 3.40 |
+| 64 | 256 | leader only | 4581 | 581 | 70.53 | 10.22 |
+| 256 | 1 | leader only | 56 | 4 | 22.37| 4.33 |
+| 256 | 64 | leader only | 2052 | 151 | 36.83 | 4.20 |
+| 256 | 256 | leader only | 4442 | 560 | 71.59 | 10.03 |
+| 64 | 64 | all servers | 1625 | 85 | 58.51 | 5.14 |
+| 64 | 256 | all servers | 4461 | 298 | 89.47 | 36.48 |
+| 256 | 64 | all servers | 1599 | 94 | 60.11| 6.43 |
+| 256 | 256 | all servers | 4315 | 193 | 88.98 | 7.01 |
+
+## Performance Changes
+
+- Because etcd now records metrics for each API call, read QPS performance seems to see a minor decrease in most scenarios. This minimal performance impact was judged a reasonable investment for the breadth of monitoring and debugging information returned.
+
+- Write QPS to cluster leaders seems to be increased by a small margin. This is because the main loop and entry apply loops were decoupled in the etcd raft logic, eliminating several blocks between them.
+
+- Write QPS to all members seems to be increased by a significant margin, because followers now receive the latest commit index sooner, and commit proposals more quickly.

Documentation/benchmarks/etcd-2-2-0-rc-benchmarks.md

@@ -0,0 +1,72 @@
+## Physical machines
+
+GCE n1-highcpu-2 machine type
+
+- 1x dedicated local SSD mounted under /var/lib/etcd
+- 1x dedicated slow disk for the OS
+- 1.8 GB memory
+- 2x CPUs
+
+## etcd Cluster
+
+3 etcd 2.2.0-rc members, each runs on a single machine.
+
+Detailed versions:
+
+```
+etcd Version: 2.2.0-alpha.1+git
+Git SHA: 59a5a7e
+Go Version: go1.4.2
+Go OS/Arch: linux/amd64
+```
+
+Also, we use 3 etcd 2.1.0 alpha-stage members to form cluster to get base performance. etcd's commit head is at [c7146bd5][c7146bd5], which is the same as the one that we use in [etcd 2.1 benchmark][etcd-2.1-benchmark].
+
+## Testing
+
+Bootstrap another machine and use the [boom HTTP benchmark tool][boom] to send requests to each etcd member. Check the [benchmark hacking guide][hack-benchmark] for detailed instructions.
+
+## Performance
+
+### reading one single key
+
+| key size in bytes | number of clients | target etcd server | read QPS | 90th Percentile Latency (ms) |
+|-------------------|-------------------|--------------------|----------|---------------|
+| 64                | 1                 | leader only        | 2804 (-5%) | 0.4 (+0%) |
+| 64                | 64                | leader only        | 17816 (+0%) | 5.7 (-6%) |
+| 64                | 256               | leader only        | 18667 (-6%) | 20.4 (+2%) |
+| 256               | 1                 | leader only        | 2181 (-15%) | 0.5 (+25%) |
+| 256               | 64                | leader only        | 17435 (-7%) | 6.0 (+9%) |
+| 256               | 256               | leader only        | 18180 (-8%) | 21.3 (+3%) |
+| 64                | 64                | all servers        | 46965 (-4%) | 2.1 (+0%) |
+| 64                | 256               | all servers        | 55286 (-6%) | 7.4 (+6%) |
+| 256               | 64                | all servers        | 46603 (-6%) | 2.1 (+5%) |
+| 256               | 256               | all servers        | 55291 (-6%) | 7.3 (+4%) |
+
+### writing one single key
+
+| key size in bytes | number of clients | target etcd server | write QPS | 90th Percentile Latency (ms) |
+|-------------------|-------------------|--------------------|-----------|---------------|
+| 64                | 1                 | leader only        | 76 (+22%)  | 19.4 (-15%) |
+| 64                | 64                | leader only        | 2461 (+45%) | 31.8 (-32%) |
+| 64                | 256               | leader only        | 4275 (+1%) | 69.6 (-10%) |
+| 256               | 1                 | leader only        | 64 (+20%)  | 16.7 (-30%) |
+| 256               | 64                | leader only        | 2385 (+30%) | 31.5 (-19%) |
+| 256               | 256               | leader only        | 4353 (-3%) | 74.0 (+9%) |
+| 64                | 64                | all servers        | 2005 (+81%) | 49.8 (-55%) |
+| 64                | 256               | all servers        | 4868 (+35%) | 81.5 (-40%) |
+| 256               | 64                | all servers        | 1925 (+72%) | 47.7 (-59%) |
+| 256               | 256               | all servers        | 4975 (+36%) | 70.3 (-36%) |
+
+### performance changes explanation
+
+- read QPS in most scenarios is decreased by 5~8%. The reason is that etcd records store metrics for each store operation. The metrics is important for monitoring and debugging, so this is acceptable.
+
+- write QPS to leader is increased by 20~30%. This is because we decouple raft main loop and entry apply loop, which avoids them blocking each other.
+
+- write QPS to all servers is increased by 30~80% because follower could receive latest commit index earlier and commit proposals faster.
+
+[boom]: https://github.com/rakyll/boom
+[c7146bd5]: https://github.com/coreos/etcd/commits/c7146bd5f2c73716091262edc638401bb8229144
+[etcd-2.1-benchmark]: etcd-2-1-0-alpha-benchmarks.md
+[hack-benchmark]: /hack/benchmark/

Documentation/benchmarks/etcd-2-2-0-rc-memory-benchmarks.md

@@ -0,0 +1,47 @@
+## Physical machine
+
+GCE n1-standard-2 machine type
+
+- 1x dedicated local SSD mounted under /var/lib/etcd
+- 1x dedicated slow disk for the OS
+- 7.5 GB memory
+- 2x CPUs
+
+## etcd
+
+```
+etcd Version: 2.2.0-rc.0+git
+Git SHA: 103cb5c
+Go Version: go1.5
+Go OS/Arch: linux/amd64
+```
+
+## Testing
+
+Start 3-member etcd cluster, each of which uses 2 cores.
+
+The length of key name is always 64 bytes, which is a reasonable length of average key bytes.
+
+## Memory Maximal Usage
+
+- etcd may use maximal memory if one follower is dead and the leader keeps sending snapshots.
+- `max RSS` is the maximal memory usage recorded in 3 runs.
+
+| value bytes | key number  | data size(MB) | max RSS(MB) | max RSS/data rate on leader |
+|-------------|-------------|---------------|-------------|-----------------------------|
+| 128  | 50000  | 6 | 433 | 72x |
+| 128  | 100000 | 12 | 659 | 54x |
+| 128  | 200000 | 24 | 1466 | 61x |
+| 1024 | 50000  | 48 | 1253 | 26x |
+| 1024 | 100000 | 96 | 2344 | 24x |
+| 1024 | 200000 | 192 | 4361 | 22x |
+
+## Data Size Threshold
+
+- When etcd reaches data size threshold, it may trigger leader election easily and drop part of proposals.
+- At most cases, etcd cluster should work smoothly if it doesn't hit the threshold. If it doesn't work well due to insufficient resources, you need to decrease its data size.
+
+| value bytes | key number limitation | suggested data size threshold(MB) | consumed RSS(MB) |
+|-------------|-----------------------|-----------------------------------|------------------|
+| 128 | 400K | 48 | 2400 |
+| 1024 | 300K | 292 | 6500 |

Documentation/benchmarks/etcd-3-demo-benchmarks.md

@@ -0,0 +1,42 @@
+## Physical machines
+
+GCE n1-highcpu-2 machine type
+
+- 1x dedicated local SSD mounted under /var/lib/etcd
+- 1x dedicated slow disk for the OS
+- 1.8 GB memory
+- 2x CPUs
+- etcd version 2.2.0
+
+## etcd Cluster
+
+1 etcd member running in v3 demo mode
+
+## Testing
+
+Use [etcd v3 benchmark tool][etcd-v3-benchmark].
+
+## Performance
+
+### reading one single key
+
+| key size in bytes | number of clients | read QPS | 90th Percentile Latency (ms) |
+|-------------------|-------------------|----------|---------------|
+| 256               | 1                 | 2716  | 0.4      |
+| 256               | 64                | 16623 | 6.1      |
+| 256               | 256               | 16622 | 21.7     |
+
+The performance is nearly the same as the one with empty server handler.
+
+### reading one single key after putting
+
+| key size in bytes | number of clients | read QPS | 90th Percentile Latency (ms) |
+|-------------------|-------------------|----------|---------------|
+| 256               | 1                 | 2269  | 0.5      |
+| 256               | 64                | 13582 | 8.6      |
+| 256               | 256               | 13262 | 47.5     |
+
+The performance with empty server handler is not affected by one put. So the
+performance downgrade should be caused by storage package.
+
+[etcd-v3-benchmark]: /tools/benchmark/

Documentation/benchmarks/etcd-3-watch-memory-benchmark.md

@@ -0,0 +1,77 @@
+# Watch Memory Usage Benchmark
+
+*NOTE*: The watch features are under active development, and their memory usage may change as that development progresses. We do not expect it to significantly increase beyond the figures stated below.
+
+A primary goal of etcd is supporting a very large number of watchers doing a massively large amount of watching. etcd aims to support O(10k) clients, O(100K) watch streams (O(10) streams per client) and O(10M) total watchings (O(100) watching per stream). The memory consumed by each individual watching accounts for the largest portion of etcd's overall usage, and is therefore the focus of current and future optimizations.
+
+
+Three related components of etcd watch consume physical memory: each `grpc.Conn`, each watch stream, and each instance of the watching activity. `grpc.Conn` maintains the actual TCP connection and other gRPC connection state. Each `grpc.Conn` consumes O(10kb) of memory, and might have multiple watch streams attached. 
+
+Each watch stream is an independent HTTP2 connection which consumes another O(10kb) of memory. 
+Multiple watchings might share one watch stream. 
+
+Watching is the actual struct that tracks the changes on the key-value store. Each watching should only consume < O(1kb).
+
+```
+                                          +-------+
+                                          | watch |
+                              +---------> | foo   |
+                              |           +-------+
+                       +------+-----+
+                       |   stream   |
+      +--------------> |            |
+      |                +------+-----+     +-------+
+      |                       |           | watch |
+      |                       +---------> | bar   |
++-----+------+                            +-------+
+|            |         +------------+
+|   conn     +-------> |   stream   |
+|            |         |            |
++-----+------+         +------------+
+      |
+      |
+      |
+      |                +------------+
+      +--------------> |   stream   |
+                       |            |
+                       +------------+
+```
+
+The theoretical memory consumption of watch can be approximated with the formula:
+`memory = c1 * number_of_conn + c2 * avg_number_of_stream_per_conn + c3 * avg_number_of_watch_stream`
+
+## Testing Environment
+
+etcd version
+- git head https://github.com/coreos/etcd/commit/185097ffaa627b909007e772c175e8fefac17af3
+
+GCE n1-standard-2 machine type
+- 7.5 GB memory
+- 2x CPUs
+
+## Overall memory usage
+
+The overall memory usage captures how much [RSS][rss] etcd consumes with the client watchers. While the result may vary by as much as 10%, it is still meaningful, since the goal is to learn about the rough memory usage and the pattern of allocations.
+
+With the benchmark result, we can calculate roughly that `c1 = 17kb`, `c2 = 18kb` and `c3 = 350bytes`. So each additional client connection consumes 17kb of memory and each additional stream consumes 18kb of memory, and each additional watching only cause 350bytes. A single etcd server can maintain millions of watchings with a few GB of memory in normal case.
+
+
+| clients | streams per client | watchings per stream | total watching | memory usage |
+|---------|---------|-----------|----------------|--------------|
+| 1k |  1 |   1 |   1k |   50MB |
+| 2k |  1 |   1 |   2k |   90MB |
+| 5k |  1 |   1 |   5k |  200MB |
+| 1k | 10 |   1 |  10k |  217MB |
+| 2k | 10 |   1 |  20k |  417MB |
+| 5k | 10 |   1 |  50k |  980MB |
+| 1k | 50 |   1 |  50k | 1001MB |
+| 2k | 50 |   1 | 100k | 1960MB |
+| 5k | 50 |   1 | 250k | 4700MB |
+| 1k | 50 |  10 | 500k | 1171MB |
+| 2k | 50 |  10 |   1M | 2371MB |
+| 5k | 50 |  10 | 2.5M | 5710MB |
+| 1k | 50 | 100 |   5M | 2380MB |
+| 2k | 50 | 100 |  10M | 4672MB |
+| 5k | 50 | 100 |  25M |  *OOM* |
+
+[rss]: https://en.wikipedia.org/wiki/Resident_set_size

Documentation/benchmarks/etcd-storage-memory-benchmark.md

@@ -0,0 +1,98 @@
+# Storage Memory Usage Benchmark
+
+<!---todo: link storage to storage design doc-->
+Two components of etcd storage consume physical memory. The etcd process allocates an *in-memory index* to speed key lookup. The process's *page cache*, managed by the operating system, stores recently-accessed data from disk for quick re-use.
+
+The in-memory index holds all the keys in a [B-tree][btree] data structure, along with pointers to the on-disk data (the values). Each key in the B-tree may contain multiple pointers, pointing to different versions of its values. The theoretical memory consumption of the in-memory index can hence be approximated with the formula:
+
+`N * (c1 + avg_key_size) + N * (avg_versions_of_key) * (c2 + size_of_pointer)`
+
+where `c1` is the key metadata overhead and `c2` is the version metadata overhead.
+
+The graph shows the detailed structure of the in-memory index B-tree.
+
+```
+
+
+                                In mem index
+
+                               +------------+
+                               | key || ... |
+  +--------------+             |     ||     |
+  |              |             +------------+
+  |              |             | v1  || ... |
+  |   disk    <----------------|     ||     | Tree Node
+  |              |             +------------+
+  |              |             | v2  || ... |
+  |           <----------------+     ||     |
+  |              |             +------------+
+  +--------------+       +-----+    |   |   |
+                         |     |    |   |   |
+                         |     +------------+
+                         |
+                         |
+                         ^
+                      ------+
+                      | ... |
+                      |     |
+                      +-----+
+                      | ... | Tree Node
+                      |     |
+                      +-----+
+                      | ... |
+                      |     |
+                      ------+
+```
+
+[Page cache memory][pagecache] is managed by the operating system and is not covered in detail in this document.
+
+## Testing Environment
+
+etcd version
+- git head https://github.com/coreos/etcd/commit/776e9fb7be7eee5e6b58ab977c8887b4fe4d48db
+
+GCE n1-standard-2 machine type
+
+- 7.5 GB memory
+- 2x CPUs
+
+## In-memory index memory usage
+
+In this test, we only benchmark the memory usage of the in-memory index. The goal is to find `c1` and `c2` mentioned above and to understand the hard limit of memory consumption of the storage.
+
+We calculate the memory usage consumption via the Go runtime.ReadMemStats. We calculate the total allocated bytes difference before creating the index and after creating the index. It cannot perfectly reflect the memory usage of the in-memory index itself but can show the rough consumption pattern. 
+
+| N    | versions | key size | memory usage |
+|------|----------|----------|--------------|
+| 100K | 1        | 64bytes  | 22MB         |
+| 100K | 5        | 64bytes  | 39MB         |
+| 1M   | 1        | 64bytes  | 218MB        |
+| 1M   | 5        | 64bytes  | 432MB        |
+| 100K | 1        | 256bytes | 41MB         |
+| 100K | 5        | 256bytes | 65MB         |
+| 1M   | 1        | 256bytes | 409MB        |
+| 1M   | 5        | 256bytes | 506MB        |
+
+
+Based on the result, we can calculate `c1=120bytes`, `c2=30bytes`. We only need two sets of data to calculate `c1` and `c2`, since they are the only unknown variable in the formula. The `c1=120bytes` and `c2=30bytes` are the average value of the 4 sets of `c1` and `c2` we calculated. The key metadata overhead is still relatively nontrivial (50%) for small key-value pairs. However, this is a significant improvement over the old store, which had at least 1000% overhead.
+
+## Overall memory usage
+
+The overall memory usage captures how much RSS etcd consumes with the storage. The value size should have very little impact on the overall memory usage of etcd, since we keep values on disk and only retain hot values in memory, managed by the OS page cache.
+
+| N    | versions | key size | value size | memory usage |
+|------|----------|----------|------------|--------------|
+| 100K | 1        | 64bytes  | 256bytes   | 40MB         |
+| 100K | 5        | 64bytes  | 256bytes   | 89MB         |
+| 1M   | 1        | 64bytes  | 256bytes   | 470MB        |
+| 1M   | 5        | 64bytes  | 256bytes   | 880MB        |
+| 100K | 1        | 64bytes  | 1KB        | 102MB        |
+| 100K | 5        | 64bytes  | 1KB        | 164MB        |
+| 1M   | 1        | 64bytes  | 1KB        | 587MB        |
+| 1M   | 5        | 64bytes  | 1KB        | 836MB        |
+
+Based on the result, we know the value size does not significantly impact the memory consumption. There is some minor increase due to more data held in the OS page cache.
+
+[btree]: https://en.wikipedia.org/wiki/B-tree
+[pagecache]: https://en.wikipedia.org/wiki/Page_cache
+

Documentation/branch_management.md

@@ -0,0 +1,26 @@
+# Branch management
+
+## Guide
+
+* New development occurs on the [master branch][master].
+* Master branch should always have a green build!
+* Backwards-compatible bug fixes should target the master branch and subsequently be ported to stable branches.
+* Once the master branch is ready for release, it will be tagged and become the new stable branch.
+
+The etcd team has adopted a *rolling release model* and supports one stable version of etcd.
+
+### Master branch
+
+The `master` branch is our development branch. All new features land here first.
+
+To try new and experimental features, pull `master` and play with it. Note that `master` may not be stable because new features may introduce bugs.
+
+Before the release of the next stable version, feature PRs will be frozen. We will focus on the testing, bug-fix and documentation for one to two weeks.
+
+### Stable branches
+
+All branches with prefix `release-` are considered _stable_ branches.
+
+After every minor release (http://semver.org/), we will have a new stable branch for that release. We will keep fixing the backwards-compatible bugs for the latest stable release, but not previous releases. The _patch_ release, incorporating any bug fixes, will be once every two weeks, given any patches.
+
+[master]: https://github.com/coreos/etcd/tree/master

Documentation/contributor-guide/branch_management.md

@@ -1,27 +0,0 @@
-# Branch management
-
-## Guide
-
-* New development occurs on the [main branch][main].
-* Main branch should always have a green build!
-* Backwards-compatible bug fixes should target the main branch and subsequently be ported to stable branches.
-* Once the main branch is ready for release, it will be tagged and become the new stable branch.
-
-The etcd team has adopted a *rolling release model* and supports two stable versions of etcd.
-
-### Main branch
-
-The `main` branch is our development branch. All new features land here first.
-
-To try new and experimental features, pull `main` and play with it. Note that `main` may not be stable because new features may introduce bugs.
-
-Before the release of the next stable version, feature PRs will be frozen. A [release manager](./release.md/#release-management) will be assigned to major/minor version and will lead the etcd community in test, bug-fix and documentation of the release for one to two weeks.
-
-### Stable branches
-
-All branches with prefix `release-` are considered _stable_ branches.
-
-After every minor release ([semver.org](https://semver.org/)), we will have a new stable branch for that release, managed by a [patch release manager](./release.md/#release-management). We will keep fixing the backwards-compatible bugs for the latest two stable releases. A _patch_ release to each supported release branch, incorporating any bug fixes, will be once every two weeks, given any patches.
-
-[main]: https://github.com/etcd-io/etcd/tree/main
-

Documentation/contributor-guide/community-membership.md

@@ -1,168 +0,0 @@
-# Community membership
-
-This doc outlines the various responsibilities of contributor roles in etcd. 
-
-| Role       | Responsibilities                             | Requirements                                                  | Defined by                           |
-|------------|----------------------------------------------|---------------------------------------------------------------|--------------------------------------|
-| Member     | Active contributor in the community          | Sponsored by 2 reviewers and multiple contributions           | etcd GitHub org member               |
-| Reviewer   | Review contributions from other members      | History of review and authorship                              | [MAINTAINERS] file reviewer entry    |
-| Maintainer | Set direction and priorities for the project | Demonstrated responsibility and excellent technical judgement | [MAINTAINERS] file maintainers entry |
-
-## New contributors
-
-New contributors should be welcomed to the community by existing members,
-helped with PR workflow, and directed to relevant documentation and
-communication channels.
-
-## Established community members
-
-Established community members are expected to demonstrate their adherence to the
-principles in this document, familiarity with project organization, roles,
-policies, procedures, conventions, etc., and technical and/or writing ability.
-Role-specific expectations, responsibilities, and requirements are enumerated
-below.
-
-## Member
-
-Members are continuously active contributors in the community.  They can have
-issues and PRs assigned to them. Members are expected to remain active 
-contributors to the community.
-
-**Defined by:** Member of the etcd GitHub organization.
-
-### Requirements
-
-- Enabled [two-factor authentication] on their GitHub account
-- Have made multiple contributions to the project or community.  Contribution may include, but is not limited to:
-    - Authoring or reviewing PRs on GitHub. At least one PR must be **merged**.
-    - Filing or commenting on issues on GitHub
-    - Contributing to community discussions (e.g. meetings, Slack, email discussion
-      forums, Stack Overflow)
-- Subscribed to [etcd-dev@googlegroups.com]
-- Have read the [contributor guide]
-- Sponsored by one active maintainer or two reviewers.
-    - Sponsors must be from multiple member companies to demonstrate integration across community.
-    - With no objections from other maintainers
-- Open a [membership nomination] issue against the etcd-io/etcd repo
-    - Ensure your sponsors are @mentioned on the issue
-    - Make sure that the list of contributions included is representative of your work on the project.
-- Members can be removed by a supermajority of the maintainers or can resign by notifying
-  the maintainers.
-
-### Responsibilities and privileges
-
-- Responsive to issues and PRs assigned to them
-- Granted "triage access" to etcd project
-- Active owner of code they have contributed (unless ownership is explicitly transferred)
-    - Code is well tested
-    - Tests consistently pass
-    - Addresses bugs or issues discovered after code is accepted
-
-**Note:** members who frequently contribute code are expected to proactively
-perform code reviews and work towards becoming a *reviewer*.
-
-## Reviewers
-
-Reviewers are contributors who have demonstrated greater skill in
-reviewing the code from other contributors. They are knowledgeable about both 
-the codebase and software engineering principles. Their LGTM counts towards
-merging a code change into the project. A reviewer is generally on the ladder towards
-maintainership. 
-
-**Defined by:** *reviewers* entry in the [MAINTAINERS] file.
-
-### Requirements
-
-- member for at least 3 months.
-- Primary reviewer for at least 5 PRs to the codebase.
-- Reviewed or contributed at least 20 substantial PRs to the codebase.
-- Knowledgeable about the codebase.
-- Sponsored by two active maintainers.
-    - Sponsors must be from multiple member companies to demonstrate integration across community.
-    - With no objections from other maintainers
-- Reviewers can be removed by a supermajority of the maintainers or can resign by notifying
-  the maintainers.
-
-### Responsibilities and privileges
-
-- Code reviewer status may be a precondition to accepting large code contributions
-- Responsible for project quality control via code reviews
-    - Focus on code quality and correctness, including testing and factoring
-    - May also review for more holistic issues, but not a requirement
-- Expected to be responsive to review requests
-- Assigned PRs to review related to area of expertise
-- Assigned test bugs related to area of expertise
-- Granted "triage access" to etcd project
-
-## Maintainers
-
-Maintainers are first and foremost contributors that have shown they
-are committed to the long term success of a project. Maintainership is about building
-trust with the current maintainers and being a person that they can
-depend on to make decisions in the best interest of the project in a consistent manner.
-
-**Defined by:** *maintainers* entry in the [MAINTAINERS] file.
-
-### Requirements
-
-- Deep understanding of the technical goals and direction of the project
-- Deep understanding of the technical domain of the project
-- Sustained contributions to design and direction by doing all of:
-    - Authoring and reviewing proposals
-    - Initiating, contributing and resolving discussions (emails, GitHub issues, meetings)
-    - Identifying subtle or complex issues in designs and implementation PRs
-- Directly contributed to the project through implementation and / or review
-- Sponsored by two active maintainers and elected by supermajority
-    - Sponsors must be from multiple member companies to demonstrate integration across community.
-- To become a maintainer send an email with your candidacy to [etcd-maintainers-private@googlegroups.com]
-    - Ensure your sponsors are @mentioned on the email
-    - Include a list of contributions representative of your work on the project.
-    - Existing maintainers vote will privately and respond to the email with either acceptance or with feedback for suggested improvement.
-- With your membership approved you are expected to:
-  - Open a PR and add an entry to the [MAINTAINERS] file
-  - Subscribe to [etcd-maintainers@googlegroups.com] and [etcd-maintainers-private@googlegroups.com]
-  - Request to join to [etcd-maintainer teams of etcd organization of GitHub](https://github.com/orgs/etcd-io/teams/maintainers-etcd)
-  - Request to join to the private slack channel for etcd maintainers on [kubernetes slack](http://slack.kubernetes.io/)
-  - Request access to etcd-development GCP project where we publish releases
-  - Request access to passwords shared between maintainers
-
-### Responsibilities and privileges
-
-- Make and approve technical design decisions
-- Set technical direction and priorities
-- Define milestones and releases
-- Mentor and guide reviewers, and contributors to the project.
-- Participate when called upon in the [security disclosure and release process]
-- Ensure continued health of the project
-    - Adequate test coverage to confidently release
-    - Tests are passing reliably (i.e. not flaky) and are fixed when they fail
-- Ensure a healthy process for discussion and decision making is in place.
-- Work with other maintainers to maintain the project's overall health and success holistically
-
-### Retiring
-
-Life priorities, interests, and passions can change. Maintainers can retire and
-move to [emeritus maintainers]. If a maintainer needs to step down, they should
-inform other maintainers, if possible, help find someone to pick up the related
-work. At the very least, ensure the related work can be continued. Afterward
-they can remove themselves from list of existing maintainers.
-
-If a maintainer has not been performing their duties for period of 12 months,
-they can be removed by other maintainers. In that case inactive maintainer will
-be first notified via an email. If situation doesn't improve, they will be
-removed. If an emeritus maintainer wants to regain an active role, they can do
-so by renewing their contributions. Active maintainers should welcome such a move.
-Retiring of other maintainers or regaining the status should require approval
-of at least two active maintainers.
-
-## Acknowledgements
-
-Contributor roles and responsibilities were written based on [Kubernetes community membership]
-
-[MAINTAINERS]: /MAINTAINERS
-[contributor guide]: /CONTRIBUTING.md
-[membership nomination]:https://github.com/etcd-io/etcd/issues/new?assignees=&labels=area%2Fcommunity&template=membership-request.yml 
-[Kubernetes community membership]: https://github.com/kubernetes/community/blob/master/community-membership.md
-[emeritus maintainers]: /README.md#etcd-emeritus-maintainers
-[security disclosure and release process]: /security/README.md
-[two-factor authentication]: https://docs.github.com/en/authentication/securing-your-account-with-two-factor-authentication-2fa/about-two-factor-authentication

Documentation/contributor-guide/dependency_management.md

@@ -1,102 +0,0 @@
-Dependency management
-======
-
-# Table of Contents
-- **[Main branch](#main-branch)**
-    - [Dependencies used in workflows](#dependencies-used-in-workflows)
-    - [Bumping order](#bumping-order)
-    - [Steps to bump a dependency](#steps-to-bump-a-dependency)
-    - [Indirect dependencies](#indirect-dependencies)
-    - [About gRPC](#about-grpc)
-    - [Rotation worksheet](#rotation-worksheet)
-- **[Stable branches](#stable-branches)**
-
-# Main branch
-
-The dependabot is enabled & [configured](https://github.com/etcd-io/etcd/blob/main/.github/dependabot.yml) to
-manage dependencies for etcd `main` branch. But dependabot doesn't work well for multi-module repository like `etcd`,
-see [dependabot-core/issues/6678](https://github.com/dependabot/dependabot-core/issues/6678). 
-Usually human intervention is required each time when dependabot automatically opens some PRs to bump dependencies.
-Please see guidance below.
-
-## Dependencies used in workflows
-The PRs which automatically bump dependencies (see examples below) used in workflows are fine, and can be approved & merged directly as long as all checks are successful.
-- [build(deps): bump github/codeql-action from 2.2.11 to 2.2.12](https://github.com/etcd-io/etcd/pull/15736)
-- [build(deps): bump actions/checkout from 3.5.0 to 3.5.2](https://github.com/etcd-io/etcd/pull/15735)
-- [build(deps): bump ossf/scorecard-action from 2.1.2 to 2.1.3](https://github.com/etcd-io/etcd/pull/15607)
-
-## Bumping order
-When multiple etcd modules depend on the same package, please bump the package version for all the modules in the correct order. The rule is simple:
-if module A depends on module B, then bump the dependency for module B before module A. If the two modules do not depend on each other, then
-it doesn't matter to bump which module first. For example, multiple modules depend on `github.com/spf13/cobra`, we need to bump the dependency
-in the following order,
-- go.etcd.io/etcd/pkg/v3
-- go.etcd.io/etcd/server/v3
-- go.etcd.io/etcd/etcdctl/v3
-- go.etcd.io/etcd/etcdutl/v3
-- go.etcd.io/etcd/tests/v3
-- go.etcd.io/etcd/v3
-- go.etcd.io/etcd/tools/v3
-For more details about etcd Golang modules, please check https://etcd.io/docs/next/dev-internal/modules/
-
-Note the module `go.etcd.io/etcd/tools/v3` doesn't depend on any other modules, nor by any other modules, so it doesn't matter when to bump dependencies for it.
-
-## Steps to bump a dependency
-Use the `github.com/spf13/cobra` as an example, follow steps below to bump it from 1.6.1 to 1.7.0 for module `go.etcd.io/etcd/etcdctl/v3`,
-```
-$ cd ${ETCD_ROOT_DIR}/etcdctl
-$ go get github.com/spf13/cobra@v1.7.0
-$ go mod tidy
-$ cd ..
-$ ./scripts/fix.sh
-```
-
-Execute the same steps for all other modules. When you finish bumping the dependency for all modules, then commit the change,
-```
-$ git add .
-$ git commit --signoff -m "dependency: bump github.com/spf13/cobra from 1.6.1 to 1.7.0"
-```
-
-Please close the related PRs which were automatically opened by dependabot. 
-
-When you bump multiple dependencies in one PR, it's recommended to create a separate commit for each dependency. But it isn't a must; for example,
-you can get all dependencies bumping for the module `go.etcd.io/etcd/tools/v3` included in one commit.
-
-## Indirect dependencies
-Usually we don't bump a dependency if all modules just indirectly depend on it, such as `github.com/go-logr/logr`.
-
-If an indirect dependency (e.g. `D1`) causes any CVE or bugs which affect etcd, usually the module (e.g. `M1`, not part of etcd, but used by etcd)
-which depends on it should bump the dependency (`D1`), and then etcd just needs to bump `M1`. However, if the module (`M1`) somehow doesn't
-bump the problematic dependency, then etcd can still bump it (`D1`) directly following the same steps above. But as a long-term solution, etcd should 
-try to remove the dependency on such module (`M1`) that lack maintenance.
-
-For mixed cases, in which some modules directly while others indirectly depend on a dependency, we have multiple options,
-- Bump the dependency for all modules, no matter it's direct or indirect dependency.
-- Bump the dependency only for modules which directly depend on it.
-
-We should try to follow the first way, and temporarily fall back to the second one if we run into any issue on the first way. Eventually we
-should fix the issue and ensure all modules depend on the same version of the dependency.
-
-## Known incompatible dependency updates
-
-### arduino/setup-protoc
-Please refer to [build(deps): bump arduino/setup-protoc from 1.3.0 to 2.0.0](https://github.com/etcd-io/etcd/pull/16016)
-
-### About gRPC
-There is a compatible issue between etcd and gRPC 1.52.0, and there is a pending PR [pull/15131](https://github.com/etcd-io/etcd/pull/15131).
-
-The plan is to remove the dependency on some grpc-go's experimental API firstly, afterwards try to bump it again. Please get more details in
-[issues/15145](https://github.com/etcd-io/etcd/issues/15145).
-
-`go.opentelemetry.io/otel` version update is indirectly blocked due to this gRPC issue. Please get more details in [pull/15810](https://github.com/etcd-io/etcd/pull/15810).
-
-## Rotation worksheet
-The dependabot scheduling interval is weekly; it means dependabot will automatically raise a bunch of PRs per week.
-Usually human intervention is required each time. We have a [rotation worksheet](https://docs.google.com/spreadsheets/d/1DDWzbcOx1p32MhyelaPZ_SfYtAD6xRsrtGRZ9QXPOyQ/edit#gid=0),
-and everyone is welcome to participate; you just need to register your name in the worksheet.
-
-# Stable branches
-Usually we don't proactively bump dependencies for stable releases unless there are any CVEs or bugs that affect etcd.
-
-If we have to do it, then follow the same guidance above. Note that there is no `./scripts/fix.sh` in release-3.4, so no need to
-execute it for 3.4.

Documentation/contributor-guide/features.md

@@ -1,83 +0,0 @@
-# Features 
-
-This document provides an overview of etcd features and general development guidelines for adding and deprecating them. The project maintainers can override these guidelines per the need of the project following the project governance.
-
-## Overview
-
-The etcd features fall into three stages, experimental, stable, and unsafe.
-
-### Experimental
-
-Any new feature is usually added as an experimental feature. An experimental feature is characterized as below:
-- Might be buggy due to a lack of user testing. Enabling the feature may not work as expected.
-- Disabled by default when added initially.
-- Support for such a feature may be dropped at any time without notice
-    - Feature related issues may be given lower priorities.
-    - It can be removed in the next minor or major release without following the feature deprecation policy unless it graduates to the stable future.
-
-### Stable
-
-A stable feature is characterized as below:
-- Supported as part of the supported releases of etcd.
-- May be enabled by default.
-- Discontinuation of support must follow the feature deprecation policy.
-
-### Unsafe
-
-Unsafe features are rare and listed under the `Unsafe feature:` section in the etcd usage documentation. By default, they are disabled. They should be used with caution following documentation. An unsafe feature can be removed in the next minor or major release without following feature deprecation policy.
-
-## Development Guidelines
-
-### Adding a new feature
-
-Any new enhancements to the etcd are typically added as an experimental feature. The general development requirements are listed below. They can be somewhat flexible depending on the scope of the feature and review discussions, and will evolve over time.
-- Open an issue
-    - It must provide a clear need for the proposed feature.
-    - It should list development work items as checkboxes. There must be one work item towards future graduation to the stable future.
-    - Label the issue with `type/feature` and `experimental`.
-    - Keep the issue open for tracking purpose until a decision is made on graduation.
-- Open a Pull Request (PR)
-    - Provide unit tests. Integreation tests are also recommended as possible.
-    - Provide robust e2e test coverage. If the feature being added is complicated or quickly needed, maintainers can decide to go with e2e tests for basic coverage initially and have robust coverage added at the later time before feature graduation to the stable feature.
-    - Provide logs for proper debugging.
-    - Provide metrics and benchmarks as needed.
-    - The Feature should be disabled by default.
-    - Any configuration flags related to the implementation of the feature must be prefixed with `experimental` e.g. `--experimental-feature-name`.
-    - Add a CHANGELOG entry.
-- At least two maintainers must approve feature requirements and related code changes.
-
-### Graduating an Experimental feature to Stable
-
-It is important that experimental features don't get stuck in that stage. They should be revisited and moved to the stable stage following the graduation steps as described here.
-
-#### Locate graduation candidate
-Decide if an experimental feature is ready for graduation to the stable stage.
-- Find the issue that was used to enable the experimental feature initially. One way to find such issues is to search for issues with `type/feature` and `experimental` labels.
-- Fix any known open issues against the feature.
-- Make sure the feature was enabled for at least one previous release. Check the PR(s) reference from the issue to see when the feature related code changes were merged.
-
-#### Provide implementation
-If an experimental feature is found ready for graduation to the stable stage, open a Pull Request (PR) with the following changes.
-- Add robust e2e tests if not already provided.
-- Add a new stable feature flag identical to the experimental feature flag but without the `--experimental` prefix.
-- Deprecate the experimental feature following the [feature deprecation policy](#Deprecating-a-feature).
-- Implementation must ensure that both the graduated and deprecated experimental feature flags work as expected. Note that both these flags will co-exist for the timeframe described in the feature deprecation policy.
-- Enable the graduated feature by default if needed.
-
-At least two maintainers must approve the work. Patch releases should not be considered for graduation.
-
-### Deprecating a feature
-
-#### Experimental
-An experimental feature deprecates when it graduates to the stable stage.
-- Add a deprecation message in the documentation of the experimental feature with a recommendation to use related stable feature. e.g. `DEPRECATED. Use <feature-name> instead.`
-- Add a `deprecated` label in the issue that was initially used to enable the experimental feature.
-
-#### Stable
-As the project evolves, a stable feature may sometimes need to be deprecated and removed. Such a situation should be handled using the steps below:
-- Create an issue for tracking purpose.
-- Add a deprecation message in the feature usage documentation before a planned release for feature deprecation. e.g. `To be deprecated in <release>.`. If a new feature replaces the `To be deprecated` feature, then also provide a message saying so. e.g. `Use <feature-name> instead.`.
-- Deprecate the feature in the planned release with a message as part of the feature usage documentation. e.g. `DEPRECATED`. If a new feature replaces the deprecated feature, then also provide a message saying so. e.g. `DEPRECATED. Use <feature-name> instead.`.
-- Add a `deprecated` label in the related issue.
-
-Remove the deprecated feature in the following release. Close any related issue(s). At least two maintainers must approve the work. Patch releases should not be considered for deprecation.

Documentation/contributor-guide/local_cluster.md

@@ -1,150 +0,0 @@
-# Set up local cluster
-
-For testing and development deployments, the quickest and easiest way is to configure a local cluster. For a production deployment, refer to the [clustering][clustering] section.
-
-## Local standalone cluster
-
-### Starting a cluster
-
-Run the following to deploy an etcd cluster as a standalone cluster:
-
-```
-$ ./etcd
-...
-```
-
-If the `etcd` binary is not present in the current working directory, it might be located either at `$GOPATH/bin/etcd` or at `/usr/local/bin/etcd`. Run the command appropriately.
-
-The running etcd member listens on `localhost:2379` for client requests.
-
-### Interacting with the cluster
-
-Use `etcdctl` to interact with the running cluster:
-
-1. Store an example key-value pair in the cluster:
-
-    ```
-      $ ./etcdctl put foo bar
-      OK
-    ```
-
-    If OK is printed, storing key-value pair is successful.
-
-2. Retrieve the value of `foo`:
-
-    ```
-    $ ./etcdctl get foo
-    bar
-    ```
-
-    If `bar` is returned, interaction with the etcd cluster is working as expected.
-
-## Local multi-member cluster
-
-### Starting a cluster
-
-A `Procfile` at the base of the etcd git repository is provided to easily configure a local multi-member cluster. To start a multi-member cluster, navigate to the root of the etcd source tree and perform the following:
-
-1. Install `goreman` to control Procfile-based applications:
-
-    ```
-    $ go install github.com/mattn/goreman@latest
-    ```
-   The installation will place executables in the $GOPATH/bin. If $GOPATH environment variable is not set, the tool will be installed into the $HOME/go/bin. Make sure that $PATH is set accordingly in your environment.
-
-2. Start a cluster with `goreman` using etcd's stock Procfile:
-
-    ```
-    $ goreman -f Procfile start
-    ```
-
-    The members start running. They listen on `localhost:2379`, `localhost:22379`, and `localhost:32379` respectively for client requests.
-
-### Interacting with the cluster
-
-Use `etcdctl` to interact with the running cluster:
-
-1. Print the list of members:
-
-    ```
-    $ etcdctl --write-out=table --endpoints=localhost:2379 member list
-    ```
-    The list of etcd members are displayed as follows:
-
-    ```
-    +------------------+---------+--------+------------------------+------------------------+
-    |        ID        | STATUS  |  NAME  |       PEER ADDRS       |      CLIENT ADDRS      |
-    +------------------+---------+--------+------------------------+------------------------+
-    | 8211f1d0f64f3269 | started | infra1 | http://127.0.0.1:2380  | http://127.0.0.1:2379  |
-    | 91bc3c398fb3c146 | started | infra2 | http://127.0.0.1:22380 | http://127.0.0.1:22379 |
-    | fd422379fda50e48 | started | infra3 | http://127.0.0.1:32380 | http://127.0.0.1:32379 |
-    +------------------+---------+--------+------------------------+------------------------+
-    ```
-
-2. Store an example key-value pair in the cluster:
-
-    ```
-    $ etcdctl put foo bar
-    OK
-    ```
-
-    If OK is printed, storing key-value pair is successful.
-
-### Testing fault tolerance
-
-To exercise etcd's fault tolerance, kill a member and attempt to retrieve the key.
-
-1. Identify the process name of the member to be stopped.
-
-    The `Procfile` lists the properties of the multi-member cluster. For example, consider the member with the process name, `etcd2`.
-
-2. Stop the member:
-
-    ```
-    # kill etcd2
-    $ goreman run stop etcd2
-    ```
-
-3. Store a key:
-
-    ```
-    $ etcdctl put key hello
-    OK
-    ```
-
-4.  Retrieve the key that is stored in the previous step:
-
-    ```
-    $ etcdctl get key
-    hello
-    ```
-
-5. Retrieve a key from the stopped member:
-
-    ```
-    $ etcdctl --endpoints=localhost:22379 get key
-    ```
-
-    The command should display an error caused by connection failure:
-
-    ```
-    2017/06/18 23:07:35 grpc: Conn.resetTransport failed to create client transport: connection error: desc = "transport: dial tcp 127.0.0.1:22379: getsockopt: connection refused"; Reconnecting to "localhost:22379"
-    Error:  grpc: timed out trying to connect
-    ```
-6. Restart the stopped member:
-
-    ```
-    $ goreman run restart etcd2
-    ```
-
-7. Get the key from the restarted member:
-
-    ```
-    $ etcdctl --endpoints=localhost:22379 get key
-    hello
-    ```
-
-    Restarting the member re-establish the connection. `etcdctl` will now be able to retrieve the key successfully. To learn more about interacting with etcd, read [interacting with etcd section][interacting].
-
-[clustering]: https://etcd.io/docs/latest/op-guide/clustering/
-[interacting]: https://etcd.io/docs/latest/dev-guide/interacting_v3/

Documentation/contributor-guide/logging.md

@@ -1,33 +0,0 @@
-# Logging Conventions
-
-etcd uses the [zap][zap] library for logging application output categorized into *levels*. A log message's level is determined according to these conventions:
-
-* Debug: Everything is still fine, but even common operations may be logged, and less helpful but more quantity of notices. Usually not used in production.
-  * Examples:
-    * Send a normal message to a remote peer
-    * Write a log entry to disk
-
-* Info: Normal, working log information, everything is fine, but helpful notices for auditing or common operations. Should rather not be logged more frequently than once per a few seconds in normal server's operation.
-  * Examples:
-    * Startup configuration
-    * Start to do snapshot
-
-* Warning: (Hopefully) Temporary conditions that may cause errors, but may work fine. A replica disappearing (that may reconnect) is a warning.
-  * Examples:
-    * Failure to send raft message to a remote peer
-    * Failure to receive heartbeat message within the configured election timeout
-
-* Error: Data has been lost, a request has failed for a bad reason, or a required resource has been lost.
-  * Examples:
-    * Failure to allocate disk space for WAL
-
-* Panic: Unrecoverable or unexpected error situation that requires stopping execution.
-  * Examples:
-    * Failure to create the database
-
-* Fatal: Unrecoverable or unexpected error situation that requires immediate exit. Mostly used in the test.
-  * Examples:
-    * Failure to find the data directory
-    * Failure to run a test function
-
-[zap]: https://github.com/uber-go/zap

Documentation/contributor-guide/modules.md

@@ -1,91 +0,0 @@
-# Golang modules
-
-The etcd project (since version 3.5) is organized into multiple
-[golang modules](https://golang.org/ref/mod) hosted  in a [single repository](https://golang.org/ref/mod#vcs-dir).
-
-![modules graph](modules.svg)
-
-There are following modules:
-
-  - **go.etcd.io/etcd/api/v3** - contains API definitions
-  (like protos & proto-generated libraries) that defines communication protocol
-  between etcd clients and server.
-
-  - **go.etcd.io/etcd/pkg/v3** - collection of utility packages used by etcd
-  without being specific to etcd itself. A package belongs here
-  only if it could possibly be moved out into its own repository in the future.
-  Please avoid adding here code that has a lot of dependencies on its own, as
-  they automatically becoming dependencies of the client library
-  (that we want to keep lightweight).
-
-  - **go.etcd.io/etcd/client/v3** - client library used to contact etcd over
-  the network (grpc). Recommended for all new usage of etcd.
-
-  - **go.etcd.io/raft/v3** - implementation of distributed consensus
-  protocol. Should have no etcd specific code. Hosted in a separate repository:
-  https://github.com/etcd-io/raft.
-
-  - **go.etcd.io/etcd/server/v3** - etcd implementation.
-  The code in this package is etcd internal and should not be consumed
-  by external projects. The package layout and API can change within the minor versions.
-
-  - **go.etcd.io/etcd/etcdctl/v3** - a command line tool to access and manage etcd.
-
-  - **go.etcd.io/etcd/tests/v3** - a module that contains all integration tests of etcd.
-    Notice: All unit-tests (fast and not requiring cross-module dependencies)
-    should be kept in the local modules to the code under the test.
-
-  - **go.etcd.io/bbolt** - implementation of persistent b-tree.
-    Hosted in a separate repository: https://github.com/etcd-io/bbolt.
-
-
-### Operations
-
-1. All etcd modules should be released in the same versions, e.g.
-   `go.etcd.io/etcd/client/v3@v3.5.10` must depend on `go.etcd.io/etcd/api/v3@v3.5.10`.
-
-   The consistent updating of versions can by performed using:
-   ```shell script
-   % DRY_RUN=false TARGET_VERSION="v3.5.10" ./scripts/release_mod.sh update_versions
-   ```
-2. The released modules should be tagged according to https://golang.org/ref/mod#vcs-version rules,
-   i.e. each module should get its own tag.
-   The tagging can be performed using:
-   ```shell script
-   % DRY_RUN=false REMOTE_REPO="origin" ./scripts/release_mod.sh push_mod_tags
-   ```
-
-3. All etcd modules should depend on the same versions of underlying dependencies.
-   This can be verified using:
-   ```shell script
-   % PASSES="dep" ./test.sh
-   ```
-
-4. The go.mod files must not contain dependencies not being used and must
-   conform to `go mod tidy` format.
-   This is being verified by:
-   ```
-   % PASSES="mod_tidy" ./test.sh
-   ```
-
-5. To trigger actions across all modules (e.g. auto-format all files), please
-   use/expand the following script:
-   ```shell script
-   % ./scripts/fix.sh
-   ```
-
-### Future
-
-As a North Star, we would like to evaluate etcd modules towards following model:
-
-![modules graph](modules-future.svg)
-
-This assumes:
-  - Splitting etcdmigrate/etcdadm out of etcdctl binary.
-    Thanks to this etcdctl would become clearly a command-line wrapper
-    around network client API,
-    while etcdmigrate/etcdadm would support direct physical operations on the
-    etcd storage files.
-  - Splitting etcd-proxy out of ./etcd binary, as it contains more experimental code
-    so carries additional risk & dependencies.
-  - Deprecation of support for v2 protocol.

Documentation/contributor-guide/release.md

@@ -1,75 +0,0 @@
-# Release
-
-The guide talks about how to release a new version of etcd.
-
-The procedure includes some manual steps for sanity checking, but it can probably be further scripted. Please keep this document up-to-date if making changes to the release process.
-
-## Release management
-
-etcd community members are assigned to manage the release each etcd major/minor version as well as manage patches
-and to each stable release branch. The managers are responsible for communicating the timelines and status of each
-release and for ensuring the stability of the release branch.
-
-| Releases               | Manager                                                     |
-|------------------------|-------------------------------------------------------------|
-| 3.4 patch (post 3.4.0) | Benjamin Wang [@ahrtr](https://github.com/ahrtr)            |
-| 3.5 patch (post 3.5.0) | Marek Siarkowicz [@serathius](https://github.com/serathius) |
-
-All releases version numbers follow the format of [semantic versioning 2.0.0](http://semver.org/).
-
-### Major, minor version release, or its pre-release
-
-- Ensure the relevant milestone on GitHub is complete. All referenced issues should be closed, or moved elsewhere.
-- Ensure the latest upgrade documentation is available.
-- Bump [hardcoded MinClusterVerion in the repository](https://github.com/etcd-io/etcd/blob/v3.4.15/version/version.go#L29), if necessary.
-- Add feature capability maps for the new version, if necessary.
-
-### Patch version release
-
-- To request a backport, devlopers submit cherrypick PRs targeting the release branch. The commits should not include merge commits. The commits should be restricted to bug fixes and security patches.
-- The cherrypick PRs should target the appropriate release branch (`base:release-<major>-<minor>`). `hack/patch/cherrypick.sh` may be used to automatically generate cherrypick PRs.
-- The release patch manager reviews the cherrypick PRs. Please discuss carefully what is backported to the patch release. Each patch release should be strictly better than it's predecessor.
-- The release patch manager will cherry-pick these commits starting from the oldest one into stable branch.
-
-## Write release note
-
-- Write introduction for the new release. For example, what major bug we fix, what new features we introduce or what performance improvement we make.
-- Put `[GH XXXX]` at the head of change line to reference Pull Request that introduces the change. Moreover, add a link on it to jump to the Pull Request.
-- Find PRs with `release-note` label and explain them in `NEWS` file, as a straightforward summary of changes for end-users.
-
-## Build and push the release artifacts
-
-- Ensure `docker` is available.
-
-Run release script in root directory:
-
-```
-DRY_RUN=false ./scripts/release.sh ${VERSION}
-```
-
-It generates all release binaries and images under directory ./release.
-Binaries are pushed to gcr.io and images are pushed to quay.io and gcr.io.
-
-## Publish release page in GitHub
-
-- Set release title as the version name.
-- Follow the format of previous release pages.
-- Attach the generated binaries and signatures.
-- Select whether it is a pre-release.
-- Publish the release!
-
-## Announce to the etcd-dev Googlegroup
-
-- Follow the format of [previous release emails](https://groups.google.com/forum/#!forum/etcd-dev).
-- Make sure to include a list of authors that contributed since the previous release - something like the following might be handy:
-
-```
-git log ...${PREV_VERSION} --pretty=format:"%an" | sort | uniq | tr '\n' ',' | sed -e 's#,#, #g' -e 's#, $##'
-```
-
-- Send email to etcd-dev@googlegroups.com
-
-## Post release
-
-- Create new stable branch through `git push origin ${VERSION_MAJOR}.${VERSION_MINOR}` if this is a major stable release. This assumes `origin` corresponds to "https://github.com/etcd-io/etcd".
-- Bump [hardcoded Version in the repository](https://github.com/etcd-io/etcd/blob/v3.4.15/version/version.go#L30) to the version `${VERSION}+git`.

Documentation/contributor-guide/reporting_bugs.md

@@ -1,45 +0,0 @@
-# Reporting bugs
-
-If any part of the etcd project has bugs or documentation mistakes, please let us know by [opening an issue][etcd-issue]. We treat bugs and mistakes very seriously and believe no issue is too small. Before creating a bug report, please check that an issue reporting the same problem does not already exist.
-
-To make the bug report accurate and easy to understand, please try to create bug reports that are:
-
-- Specific. Include as much details as possible: which version, what environment, what configuration, etc. If the bug is related to running the etcd server, please attach the etcd log (the starting log with etcd configuration is especially important).
-
-- Reproducible. Include the steps to reproduce the problem. We understand some issues might be hard to reproduce, please includes the steps that might lead to the problem. If possible, please attach the affected etcd data dir and stack strace to the bug report.
-
-- Isolated. Please try to isolate and reproduce the bug with minimum dependencies. It would significantly slow down the speed to fix a bug if too many dependencies are involved in a bug report. Debugging external systems that rely on etcd is out of scope, but we are happy to provide guidance in the right direction or help with using etcd itself.
-
-- Unique. Do not duplicate existing bug report.
-
-- Scoped. One bug per report. Do not follow up with another bug inside one report.
-
-It may be worthwhile to read [Elika Etemad’s article on filing good bug reports][filing-good-bugs] before creating a bug report.
-
-We might ask for further information to locate a bug. A duplicated bug report will be closed.
-
-## Frequently asked questions
-
-### How to get a stack trace
-
-``` bash
-$ kill -QUIT $PID
-```
-
-### How to get etcd version
-
-``` bash
-$ etcd --version
-```
-
-### How to get etcd configuration and log when it runs as systemd service ‘etcd2.service’
-
-``` bash
-$ sudo systemctl cat etcd2
-$ sudo journalctl -u etcd2
-```
-
-Due to an upstream systemd bug, journald may miss the last few log lines when its processes exit. If journalctl says etcd stopped without fatal or panic message, try `sudo journalctl -f -t etcd2` to get full log.
-
-[etcd-issue]: https://github.com/etcd-io/etcd/issues/new
-[filing-good-bugs]: http://fantasai.inkedblade.net/style/talks/filing-good-bugs/

Documentation/contributor-guide/triage_issues.md

@@ -1,180 +0,0 @@
-# Issue triage guidelines
-
-## Purpose
-
-Speed up issue management.
-
-The `etcd` issues are listed at <https://github.com/etcd-io/etcd/issues> and are identified with labels. For example, an issue that is identified as a bug will be set to label `type/bug`.
-
-The etcd project uses labels to indicate common attributes such as `area`, `type` and `priority` of incoming issues.
-
-New issues will often start out without any labels, but typically `etcd` maintainers, reviewers and members will add labels by following these triage guidelines. The detailed list of labels can be found at <https://github.com/etcd-io/etcd/labels>.
-
-## Scope
-
-This document serves as the primary guidelines for triaging incoming issues in `etcd`.
-
-All contributors are encouraged and welcome to help manage issues which will help reduce burden on project maintainers, though the work and responsibilities discussed in this document are created with `etcd` project reviewers and members in mind as these individuals will have triage access to the etcd project which is a requirement for actions like applying labels or closing issues.
-
-Refer to [etcd community membership](https://github.com/etcd-io/etcd/blob/main/Documentation/contributor-guide/community-membership.md) for guidance on becoming and etcd project member or reviewer.
-
-## Step 1 - Find an issue to triage
-
-To get started you can use the following recommended issue searches to identify issues that are in need of triage:
-
-* [Issues that have no labels](https://github.com/etcd-io/etcd/issues?q=is%3Aissue+is%3Aopen+sort%3Aupdated+no%3Alabel)
-* [Issues created recently](https://github.com/etcd-io/etcd/issues?q=is%3Aissue+is%3Aopen+)
-* [Issues not assigned but linked pr](https://github.com/etcd-io/etcd/issues?q=is%3Aopen+is%3Aissue+no%3Aassignee+linked%3Apr)
-* [Issues with no comments](https://github.com/etcd-io/etcd/issues?q=is%3Aopen+is%3Aissue+comments%3A0+)
-* [Issues with help wanted](https://github.com/etcd-io/etcd/issues?q=is%3Aopen+is%3Aissue+label%3A%22help+wanted%22+)
-
-## Step 2 - Check the issue is valid
-
-Before we start adding labels or trying to work out a priority, our first triage step needs to be working out if the issue actually belongs to the etcd project and is not a duplicate.
-
-### Issues that don't belong to etcd
-
-Sometime issues are reported that actually belongs to other projects that `etcd` use. For example, `grpc` or `golang` issues. Such issues should be addressed by asking reporter to open issues in appropriate other project.
-
-These issues can generally be closed unless a maintainer and issue reporter see a need to keep it open for tracking purpose. If you have triage permissions please close it, alternatively mention the @etcd-io/members group to request a member with triage access close the issue.
-
-### Duplicate issues
-
-If an issue is a duplicate, add a comment stating so along with a reference for the original issue and if you have triage permissions please close it, alternatively mention the @etcd-io/members group to request a member with triage access close the issue.
-
-## Step 3 - Apply the appropriate type label
-
-Adding a `type` label to an issue helps create visibility on the health of the project and helps contributors identify potential priorities, i.e. addressing existing bugs or test flakes before implementing new features.
-
-### Support requests
-
-As a general rule the focus for etcd support is to address common themes in a broad way that helps all users, i.e. through channels like known issues, frequently asked questions and high quality documentation. To make the best use of project members time we should avoid providing 1:1 support if a broad approach is available.
-
-Some people mistakenly use our GitHub bug report or feature request templates to file support requests. Usually they are asking for help operating or configuring some aspect of etcd. Support requests for etcd should instead be raised as [discussions](https://github.com/etcd-io/etcd/discussions).
-
-Common types of support requests are:
-
- 1. Questions about configuring or operating existing well documented etcd features, for example <https://github.com/etcd-io/etcd/issues/15945>. Note - If an existing feature is not well documented please apply the `area/documentation` label and propose documentation improvements that would prevent future users from stumbling on the problem again.
-
- 2. Bug reports or questions about unspported versions of etcd, for example <https://github.com/etcd-io/etcd/issues/15796>. When responding to these issues please refer to our [supported versions documentation](https://etcd.io/docs/latest/op-guide/versioning) and encourage the reporter to upgrade to a recent patch release of a supported version as soon as possible. We should limit the effort supporting users that do not make the effort to run a supported version of etcd or ensure their version is patched.
-
- 3. Bug reports that do not provide a complete list of steps to reproduce issue and/or contributors are not able to reproduce the issue, for example <https://github.com/etcd-io/etcd/issues/15740>. We should limit the effort we put into reproducing issues ourselves and motivate users to provide necessary information to accept the bug report.
-
- 4. General questions that are filed using feature request or bug report issue templates, for example <https://github.com/etcd-io/etcd/issues/15914>. Note - These types of requests may surface good additions to our [frequently asked questions](https://etcd.io/docs/v3.5/faq).
-
-If you identify that an issue is a support request please:
-
- 1. Add the `type/support` or `type/question` label.
-
- 2. Add the following comment to inform the issue creator that discussions should be used instead and that this issue will be converted to a discussion.
-
-    > Thank you for your question, this support issue will be moved to our [Discussion Forums](https://github.com/etcd-io/etcd/discussions).
-    >
-    > We are trying to consolidate the channels to which questions for help/support are posted so that we can improve our efficiency in responding to your requests, and to make it easier for you to find answers to frequently asked questions and how to address common use cases.
-    >
-    > We regularly see messages posted in multiple forums, with the full response thread only in one place or, worse, spread across multiple forums. Also, the large volume of support issues on GitHub is making it difficult for us to use issues to identify real bugs.
-    >
-    > Members of the etcd community use Discussion Forums to field support requests. Before posting a new question, please search these for answers to similar questions, and also familiarize yourself with:
-    >
-    > 1. [user documentation](https://etcd.io/docs/latest)
-    > 2. [frequently asked questions](https://etcd.io/docs/v3.5/faq)
-    >  
-    > Again, thanks for using etcd and raising this question.
-    >
-    > The etcd team
-
- 3. Finally, click `Convert to discussion` on the right hand panel, selecting the appropriate discussion category.
-
-### Bug reports
-
-If an issue has been raised as a bug it should already have the `type/bug` label, however if this is missing for an issue you determine to be a bug please add the label manually.
-
-The next step is to validate if the issue is indeed a bug. If not, add a comment with findings and close trivial issue. For non-trivial issue, wait to hear back from issue reporter and see if there is any objection. If issue reporter does not reply in 30 days, close the issue.
-
-If the problem can not be reproduced or requires more information, leave a comment for the issue reporter as soon as possible while the issue will be fresh for the issue reporter.
-
-### Feature requests
-
-New feature requests should be created via the etcd feature request template and in theory already have the `type/feature` label, however if this is missing for an issue you determine to be a feature please add the label manually.
-
-### Test flakes
-
-Test flakes are a specific type of bug that the etcd project tracks seperately as these are a priority to address. These should be created via the test flake template and in theory already have the `type/flake` label, however if this is missing for an issue you determine to be related to a flaking test please add the label manually.
-
-## Step 4 - Define the areas impacted
-
-Adding an `area` label to an issue helps create visibility on which areas of the etcd project require attention and helps contributors find issues to work on relating to their particular skills or knowledge of the etcd codebase.
-
-If an issue crosses multiple domains please add additional `area` labels to reflect that.
-
-Below is a brief summary of the area labels in active use by the etcd project along with any notes on their use:
-
-| Label                   | Notes                                                         |
-| ---                     | ---                                                           |
-| area/external           | Tracking label for issues raised that are external to etcd.   |
-| area/community          |                                                               |
-| area/raft               |                                                               |
-| area/clientv3           |                                                               |
-| area/performance        |                                                               |
-| area/security           |                                                               |
-| area/tls                |                                                               |
-| area/auth               |                                                               |
-| area/etcdctl            |                                                               |
-| area/etcdutl            |                                                               |
-| area/contrib            | Not to be confused with `area/community` this label is specifically used for issues relating to community maintained scripts or files in the `contrib/` directory which aren't part of the core etcd project. |
-| area/documentation      |                                                               |
-| area/tooling            | Generally used in relation to the third party / external utilities or tools that are used in various stages of the etcd build, test or release process, for example tooling to create sboms.          |
-| area/testing            |                                                               |
-| area/robustness-testing |                                                               |
-
-## Step 5 - Prioritise the issue
-
-Placeholder.
-
-## Step 6 - Support new contributors
-
-As part of the `etcd` triage process once the `kind` and `area` have been determined, please consider if the issue would be suitable for a less experienced contributor. The `good first issue` label is a subset of the `help wanted` label, indicating that members have committed to providing extra assistance for new contributors. All `good first issue` items also have the `help wanted` label.
-
-### Help wanted
-
-Items marked with the `help wanted` label need to ensure that they meet these criteria:
-
-* **Low Barrier to Entry** - It should be easy for new contributors.
-
-* **Clear** - The task is agreed upon and does not require further discussions in the community.
-
-* **Goldilocks priority** - The priority should not be so high that a core contributor should do it, but not too low that it isn’t useful enough for a core contributor to spend time reviewing it, answering questions, helping get it into a release, etc.
-
-### Good first issue
-
-Items marked with `good first issue` are intended for first-time contributors. It indicates that members will keep an eye out for these pull requests and shepherd it through our processes.
-
-New contributors should not be left to find an approver, ping for reviews, decipher test commands, or identify that their build failed due to a flake. It is important to make new contributors feel welcome and valued. We should assure them that they will have an extra level of help with their first contribution.
-
-After a contributor has successfully completed one or two `good first issue` items, they should be ready to move on to `help wanted` items.
-
-* **No Barrier to Entry** - The task is something that a new contributor can tackle without advanced setup or domain knowledge.
-
-* **Solution Explained** - The recommended solution is clearly described in the issue.
-
-* **Gives Examples** - Link to examples of similar implementations so new contributors have a reference guide for their changes.
-
-* **Identifies Relevant Code** - The relevant code and tests to be changed should be linked in the issue.
-
-* **Ready to Test** - There should be existing tests that can be modified, or existing test cases fit to be copied. If the area of code doesn’t have tests, before labeling the issue, add a test fixture. This prep often makes a great help wanted task!
-
-## Step 7 - Follow up
-
-Once initial triage has been completed, issues need to be re-evaluated over time to ensure they don't become stale incorrectly.
-
-### Track important issues
-
-If an issue is at risk of being closed by stale bot in future, but is an important issuefor the etcd project, then please apply the `stage/tracked` label and remove any `stale` labels that exist. This will ensure the project does not lose sight of the issue.
-
-### Close incomplete issues
-
-Issues that lack enough information from the issue reporter should be closed if issue reporter do not provide information in 30 days. Issues can always be re-opened at a later date if new information is provided.
-
-### Check for incomplete work
-
-If an issue owned by a developer has no pull request created in 30 days, contact the issue owner and kindly ask about the status of their work, or to release ownership on the issue if needed.

Documentation/contributor-guide/triage_prs.md

@@ -1,28 +0,0 @@
-# PR management
-
-## Purpose
-
-Speed up PR management.
-
-The `etcd` PRs are listed at https://github.com/etcd-io/etcd/pulls
-A PR can have various labels, milestone, reviewer etc. The detailed list of labels can be found at
-https://github.com/kubernetes/kubernetes/labels
-
-Following are few example searches on PR for convenience:
-* [Open PRS for milestone etcd-v3.6](https://github.com/etcd-io/etcd/pulls?utf8=%E2%9C%93&q=is%3Apr+is%3Aopen+milestone%3Aetcd-v3.6)
-* [PRs under investigation](https://github.com/etcd-io/etcd/labels/Investigating)
-
-## Scope
-
-These guidelines serves as a primary document for managing PRs in `etcd`. Everyone is welcome to help manage PRs but the work and responsibilities discussed in this document is created with `etcd` maintainers and active contributors in mind.
-
-## Handle inactive PRs
-Poke PR owner if review comments are not addressed in 15 days. If PR owner does not reply in 90 days, update the PR with a new commit if possible. If not, inactive PR should be closed after 180 days.
-
-## Poke reviewer if needed
-
-Reviewers are responsive in a timely fashion, but considering everyone is busy, give them some time after requesting review if quick response is not provided. If response is not provided in 10 days, feel free to contact them via adding a comment in the PR or sending an email or message on the Slack.
-
-## Verify important labels are in place
-
-Make sure that appropriate reviewers are added to the PR. Also, make sure that a milestone is identified. If any of these or other important labels are missing, add them. If a correct label cannot be decided, leave a comment for the maintainers to do so as needed.

Documentation/demo.md

@@ -0,0 +1,454 @@
+# Demo
+
+This series of examples shows the basic procedures for working with an etcd cluster.
+
+## Set up a cluster
+
+<img src="https://storage.googleapis.com/etcd/demo/01_etcd_clustering_2016051001.gif" alt="01_etcd_clustering_2016050601"/>
+
+On each etcd node, specify the cluster members:
+
+```
+TOKEN=token-01
+CLUSTER_STATE=new
+NAME_1=machine-1
+NAME_2=machine-2
+NAME_3=machine-3
+HOST_1=10.240.0.17
+HOST_2=10.240.0.18
+HOST_3=10.240.0.19
+CLUSTER=${NAME_1}=http://${HOST_1}:2380,${NAME_2}=http://${HOST_2}:2380,${NAME_3}=http://${HOST_3}:2380
+```
+
+Run this on each machine:
+
+```
+# For machine 1
+THIS_NAME=${NAME_1}
+THIS_IP=${HOST_1}
+etcd --data-dir=data.etcd --name ${THIS_NAME} \
+	--initial-advertise-peer-urls http://${THIS_IP}:2380 --listen-peer-urls http://${THIS_IP}:2380 \
+	--advertise-client-urls http://${THIS_IP}:2379 --listen-client-urls http://${THIS_IP}:2379 \
+	--initial-cluster ${CLUSTER} \
+	--initial-cluster-state ${CLUSTER_STATE} --initial-cluster-token ${TOKEN}
+
+# For machine 2
+THIS_NAME=${NAME_2}
+THIS_IP=${HOST_2}
+etcd --data-dir=data.etcd --name ${THIS_NAME} \
+	--initial-advertise-peer-urls http://${THIS_IP}:2380 --listen-peer-urls http://${THIS_IP}:2380 \
+	--advertise-client-urls http://${THIS_IP}:2379 --listen-client-urls http://${THIS_IP}:2379 \
+	--initial-cluster ${CLUSTER} \
+	--initial-cluster-state ${CLUSTER_STATE} --initial-cluster-token ${TOKEN}
+
+# For machine 3
+THIS_NAME=${NAME_3}
+THIS_IP=${HOST_3}
+etcd --data-dir=data.etcd --name ${THIS_NAME} \
+	--initial-advertise-peer-urls http://${THIS_IP}:2380 --listen-peer-urls http://${THIS_IP}:2380 \
+	--advertise-client-urls http://${THIS_IP}:2379 --listen-client-urls http://${THIS_IP}:2379 \
+	--initial-cluster ${CLUSTER} \
+	--initial-cluster-state ${CLUSTER_STATE} --initial-cluster-token ${TOKEN}
+```
+
+Or use our public discovery service:
+
+```
+curl https://discovery.etcd.io/new?size=3
+https://discovery.etcd.io/a81b5818e67a6ea83e9d4daea5ecbc92
+
+# grab this token
+TOKEN=token-01
+CLUSTER_STATE=new
+NAME_1=machine-1
+NAME_2=machine-2
+NAME_3=machine-3
+HOST_1=10.240.0.17
+HOST_2=10.240.0.18
+HOST_3=10.240.0.19
+DISCOVERY=https://discovery.etcd.io/a81b5818e67a6ea83e9d4daea5ecbc92
+
+THIS_NAME=${NAME_1}
+THIS_IP=${HOST_1}
+etcd --data-dir=data.etcd --name ${THIS_NAME} \
+	--initial-advertise-peer-urls http://${THIS_IP}:2380 --listen-peer-urls http://${THIS_IP}:2380 \
+	--advertise-client-urls http://${THIS_IP}:2379 --listen-client-urls http://${THIS_IP}:2379 \
+	--discovery ${DISCOVERY} \
+	--initial-cluster-state ${CLUSTER_STATE} --initial-cluster-token ${TOKEN}
+
+THIS_NAME=${NAME_2}
+THIS_IP=${HOST_2}
+etcd --data-dir=data.etcd --name ${THIS_NAME} \
+	--initial-advertise-peer-urls http://${THIS_IP}:2380 --listen-peer-urls http://${THIS_IP}:2380 \
+	--advertise-client-urls http://${THIS_IP}:2379 --listen-client-urls http://${THIS_IP}:2379 \
+	--discovery ${DISCOVERY} \
+	--initial-cluster-state ${CLUSTER_STATE} --initial-cluster-token ${TOKEN}
+
+THIS_NAME=${NAME_3}
+THIS_IP=${HOST_3}
+etcd --data-dir=data.etcd --name ${THIS_NAME} \
+	--initial-advertise-peer-urls http://${THIS_IP}:2380 --listen-peer-urls http://${THIS_IP}:2380 \
+	--advertise-client-urls http://${THIS_IP}:2379 --listen-client-urls http://${THIS_IP}:2379 \
+	--discovery ${DISCOVERY} \
+	--initial-cluster-state ${CLUSTER_STATE} --initial-cluster-token ${TOKEN}
+```
+
+Now etcd is ready! To connect to etcd with etcdctl:
+
+```
+export ETCDCTL_API=3
+HOST_1=10.240.0.17
+HOST_2=10.240.0.18
+HOST_3=10.240.0.19
+ENDPOINTS=$HOST_1:2379,$HOST_2:2379,$HOST_3:2379
+
+etcdctl --endpoints=$ENDPOINTS member list
+```
+
+
+## Access etcd
+
+<img src="https://storage.googleapis.com/etcd/demo/02_etcdctl_access_etcd_2016051001.gif" alt="02_etcdctl_access_etcd_2016051001"/>
+
+`put` command to write:
+
+```
+etcdctl --endpoints=$ENDPOINTS put foo "Hello World!"
+```
+
+`get` to read from etcd:
+
+```
+etcdctl --endpoints=$ENDPOINTS get foo
+etcdctl --endpoints=$ENDPOINTS --write-out="json" get foo
+```
+
+
+## Get by prefix
+
+<img src="https://storage.googleapis.com/etcd/demo/03_etcdctl_get_by_prefix_2016050501.gif" alt="03_etcdctl_get_by_prefix_2016050501"/>
+
+```
+etcdctl --endpoints=$ENDPOINTS put web1 value1
+etcdctl --endpoints=$ENDPOINTS put web2 value2
+etcdctl --endpoints=$ENDPOINTS put web3 value3
+
+etcdctl --endpoints=$ENDPOINTS get web --prefix
+```
+
+
+## Delete
+
+<img src="https://storage.googleapis.com/etcd/demo/04_etcdctl_delete_2016050601.gif" alt="04_etcdctl_delete_2016050601"/>
+
+```
+etcdctl --endpoints=$ENDPOINTS put key myvalue
+etcdctl --endpoints=$ENDPOINTS del key
+
+etcdctl --endpoints=$ENDPOINTS put k1 value1
+etcdctl --endpoints=$ENDPOINTS put k2 value2
+etcdctl --endpoints=$ENDPOINTS del k --prefix
+```
+
+
+## Transactional write
+
+`txn` to wrap multiple requests into one transaction:
+
+<img src="https://storage.googleapis.com/etcd/demo/05_etcdctl_transaction_2016050501.gif" alt="05_etcdctl_transaction_2016050501"/>
+
+```
+etcdctl --endpoints=$ENDPOINTS put user1 bad
+etcdctl --endpoints=$ENDPOINTS txn --interactive
+
+compares:
+value("user1") = "bad"      
+
+success requests (get, put, delete):
+del user1  
+
+failure requests (get, put, delete):
+put user1 good
+```
+
+
+## Watch
+
+`watch` to get notified of future changes:
+
+<img src="https://storage.googleapis.com/etcd/demo/06_etcdctl_watch_2016050501.gif" alt="06_etcdctl_watch_2016050501"/>
+
+```
+etcdctl --endpoints=$ENDPOINTS watch stock1
+etcdctl --endpoints=$ENDPOINTS put stock1 1000
+
+etcdctl --endpoints=$ENDPOINTS watch stock --prefix
+etcdctl --endpoints=$ENDPOINTS put stock1 10
+etcdctl --endpoints=$ENDPOINTS put stock2 20
+```
+
+
+## Lease
+
+`lease` to write with TTL:
+
+<img src="https://storage.googleapis.com/etcd/demo/07_etcdctl_lease_2016050501.gif" alt="07_etcdctl_lease_2016050501"/>
+
+```
+etcdctl --endpoints=$ENDPOINTS lease grant 300
+# lease 2be7547fbc6a5afa granted with TTL(300s)
+
+etcdctl --endpoints=$ENDPOINTS put sample value --lease=2be7547fbc6a5afa
+etcdctl --endpoints=$ENDPOINTS get sample
+
+etcdctl --endpoints=$ENDPOINTS lease keep-alive 2be7547fbc6a5afa
+etcdctl --endpoints=$ENDPOINTS lease revoke 2be7547fbc6a5afa
+# or after 300 seconds
+etcdctl --endpoints=$ENDPOINTS get sample
+```
+
+
+## Distributed locks
+
+`lock` for distributed lock:
+
+<img src="https://storage.googleapis.com/etcd/demo/08_etcdctl_lock_2016050501.gif" alt="08_etcdctl_lock_2016050501"/>
+
+```
+etcdctl --endpoints=$ENDPOINTS lock mutex1
+
+# another client with the same name blocks
+etcdctl --endpoints=$ENDPOINTS lock mutex1
+```
+
+
+## Elections
+
+`elect` for leader election:
+
+<img src="https://storage.googleapis.com/etcd/demo/09_etcdctl_elect_2016050501.gif" alt="09_etcdctl_elect_2016050501"/>
+
+```
+etcdctl --endpoints=$ENDPOINTS elect one p1
+
+# another client with the same name blocks
+etcdctl --endpoints=$ENDPOINTS elect one p2
+```
+
+
+## Cluster status
+
+Specify the initial cluster configuration for each machine:
+
+<img src="https://storage.googleapis.com/etcd/demo/10_etcdctl_endpoint_2016050501.gif" alt="10_etcdctl_endpoint_2016050501"/>
+
+```
+etcdctl --write-out=table --endpoints=$ENDPOINTS endpoint status
+
++------------------+------------------+---------+---------+-----------+-----------+------------+
+|     ENDPOINT     |        ID        | VERSION | DB SIZE | IS LEADER | RAFT TERM | RAFT INDEX |
++------------------+------------------+---------+---------+-----------+-----------+------------+
+| 10.240.0.17:2379 | 4917a7ab173fabe7 | 3.0.0   | 45 kB   | true      |         4 |      16726 |
+| 10.240.0.18:2379 | 59796ba9cd1bcd72 | 3.0.0   | 45 kB   | false     |         4 |      16726 |
+| 10.240.0.19:2379 | 94df724b66343e6c | 3.0.0   | 45 kB   | false     |         4 |      16726 |
++------------------+------------------+---------+---------+-----------+-----------+------------+
+```
+
+```
+etcdctl --endpoints=$ENDPOINTS endpoint health
+
+10.240.0.17:2379 is healthy: successfully committed proposal: took = 3.345431ms
+10.240.0.19:2379 is healthy: successfully committed proposal: took = 3.767967ms
+10.240.0.18:2379 is healthy: successfully committed proposal: took = 4.025451ms
+```
+
+
+## Snapshot
+
+`snapshot` to save point-in-time snapshot of etcd database:
+
+<img src="https://storage.googleapis.com/etcd/demo/11_etcdctl_snapshot_2016051001.gif" alt="11_etcdctl_snapshot_2016051001"/>
+
+```
+etcdctl --endpoints=$ENDPOINTS snapshot save my.db
+
+Snapshot saved at my.db
+```
+
+```
+etcdctl --write-out=table --endpoints=$ENDPOINTS snapshot status my.db
+
++---------+----------+------------+------------+
+|  HASH   | REVISION | TOTAL KEYS | TOTAL SIZE |
++---------+----------+------------+------------+
+| c55e8b8 |        9 |         13 | 25 kB      |
++---------+----------+------------+------------+
+```
+
+
+## Migrate
+
+`migrate` to transform etcd v2 to v3 data:
+
+<img src="https://storage.googleapis.com/etcd/demo/12_etcdctl_migrate_2016061602.gif" alt="12_etcdctl_migrate_2016061602"/>
+
+```
+# write key in etcd version 2 store
+export ETCDCTL_API=2
+etcdctl --endpoints=http://$ENDPOINT set foo bar
+
+# read key in etcd v2
+etcdctl --endpoints=$ENDPOINTS --output="json" get foo
+
+# stop etcd node to migrate, one by one
+
+# migrate v2 data
+export ETCDCTL_API=3
+etcdctl --endpoints=$ENDPOINT migrate --data-dir="default.etcd" --wal-dir="default.etcd/member/wal"
+
+# restart etcd node after migrate, one by one
+
+# confirm that the key got migrated
+etcdctl --endpoints=$ENDPOINTS get /foo
+```
+
+
+## Member
+
+`member` to add,remove,update membership:
+
+<img src="https://storage.googleapis.com/etcd/demo/13_etcdctl_member_2016062301.gif" alt="13_etcdctl_member_2016062301"/>
+
+```
+# For each machine
+TOKEN=my-etcd-token-1
+CLUSTER_STATE=new
+NAME_1=etcd-node-1
+NAME_2=etcd-node-2
+NAME_3=etcd-node-3
+HOST_1=10.240.0.13
+HOST_2=10.240.0.14
+HOST_3=10.240.0.15
+CLUSTER=${NAME_1}=http://${HOST_1}:2380,${NAME_2}=http://${HOST_2}:2380,${NAME_3}=http://${HOST_3}:2380
+
+# For node 1
+THIS_NAME=${NAME_1}
+THIS_IP=${HOST_1}
+etcd --data-dir=data.etcd --name ${THIS_NAME} \
+	--initial-advertise-peer-urls http://${THIS_IP}:2380 \
+	--listen-peer-urls http://${THIS_IP}:2380 \
+	--advertise-client-urls http://${THIS_IP}:2379 \
+	--listen-client-urls http://${THIS_IP}:2379 \
+	--initial-cluster ${CLUSTER} \
+	--initial-cluster-state ${CLUSTER_STATE} \
+	--initial-cluster-token ${TOKEN}
+
+# For node 2
+THIS_NAME=${NAME_2}
+THIS_IP=${HOST_2}
+etcd --data-dir=data.etcd --name ${THIS_NAME} \
+	--initial-advertise-peer-urls http://${THIS_IP}:2380 \
+	--listen-peer-urls http://${THIS_IP}:2380 \
+	--advertise-client-urls http://${THIS_IP}:2379 \
+	--listen-client-urls http://${THIS_IP}:2379 \
+	--initial-cluster ${CLUSTER} \
+	--initial-cluster-state ${CLUSTER_STATE} \
+	--initial-cluster-token ${TOKEN}
+
+# For node 3
+THIS_NAME=${NAME_3}
+THIS_IP=${HOST_3}
+etcd --data-dir=data.etcd --name ${THIS_NAME} \
+	--initial-advertise-peer-urls http://${THIS_IP}:2380 \
+	--listen-peer-urls http://${THIS_IP}:2380 \
+	--advertise-client-urls http://${THIS_IP}:2379 \
+	--listen-client-urls http://${THIS_IP}:2379 \
+	--initial-cluster ${CLUSTER} \
+	--initial-cluster-state ${CLUSTER_STATE} \
+	--initial-cluster-token ${TOKEN}
+```
+
+Then replace a member with `member remove` and `member add` commands:
+
+```
+# get member ID
+export ETCDCTL_API=3
+HOST_1=10.240.0.13
+HOST_2=10.240.0.14
+HOST_3=10.240.0.15
+etcdctl --endpoints=${HOST_1}:2379,${HOST_2}:2379,${HOST_3}:2379 member list
+
+# remove the member
+MEMBER_ID=278c654c9a6dfd3b
+etcdctl --endpoints=${HOST_1}:2379,${HOST_2}:2379,${HOST_3}:2379 \
+	member remove ${MEMBER_ID}
+
+# add a new member (node 4)
+export ETCDCTL_API=3
+NAME_1=etcd-node-1
+NAME_2=etcd-node-2
+NAME_4=etcd-node-4
+HOST_1=10.240.0.13
+HOST_2=10.240.0.14
+HOST_4=10.240.0.16 # new member
+etcdctl --endpoints=${HOST_1}:2379,${HOST_2}:2379 \
+	member add ${NAME_4} \
+	--peer-urls=http://${HOST_4}:2380
+```
+
+Next, start the new member with `--initial-cluster-state existing` flag:
+
+```
+# [WARNING] If the new member starts from the same disk space,
+# make sure to remove the data directory of the old member
+#
+# restart with 'existing' flag
+TOKEN=my-etcd-token-1
+CLUSTER_STATE=existing
+NAME_1=etcd-node-1
+NAME_2=etcd-node-2
+NAME_4=etcd-node-4
+HOST_1=10.240.0.13
+HOST_2=10.240.0.14
+HOST_4=10.240.0.16 # new member
+CLUSTER=${NAME_1}=http://${HOST_1}:2380,${NAME_2}=http://${HOST_2}:2380,${NAME_4}=http://${HOST_4}:2380
+
+THIS_NAME=${NAME_4}
+THIS_IP=${HOST_4}
+etcd --data-dir=data.etcd --name ${THIS_NAME} \
+	--initial-advertise-peer-urls http://${THIS_IP}:2380 \
+	--listen-peer-urls http://${THIS_IP}:2380 \
+	--advertise-client-urls http://${THIS_IP}:2379 \
+	--listen-client-urls http://${THIS_IP}:2379 \
+	--initial-cluster ${CLUSTER} \
+	--initial-cluster-state ${CLUSTER_STATE} \
+	--initial-cluster-token ${TOKEN}
+```
+
+
+## Auth
+
+`auth`,`user`,`role` for authentication:
+
+<img src="https://storage.googleapis.com/etcd/demo/14_etcdctl_auth_2016062301.gif" alt="14_etcdctl_auth_2016062301"/>
+
+```
+export ETCDCTL_API=3
+ENDPOINTS=localhost:2379
+
+etcdctl --endpoints=${ENDPOINTS} role add root
+etcdctl --endpoints=${ENDPOINTS} role grant-permission root readwrite foo
+etcdctl --endpoints=${ENDPOINTS} role get root
+
+etcdctl --endpoints=${ENDPOINTS} user add root
+etcdctl --endpoints=${ENDPOINTS} user grant-role root root
+etcdctl --endpoints=${ENDPOINTS} user get root
+
+etcdctl --endpoints=${ENDPOINTS} auth enable
+# now all client requests go through auth
+
+etcdctl --endpoints=${ENDPOINTS} --user=root:123 put foo bar
+etcdctl --endpoints=${ENDPOINTS} get foo
+etcdctl --endpoints=${ENDPOINTS} --user=root:123 get foo
+etcdctl --endpoints=${ENDPOINTS} --user=root:123 get foo1
+```

Documentation/dev-guide/api_grpc_gateway.md

@@ -0,0 +1,38 @@
+
+## Why grpc-gateway
+
+etcd v3 uses [gRPC][grpc] for its messaging protocol. The etcd project includes a gRPC-based [Go client][go-client] and a command line utility, [etcdctl][etcdctl], for communicating with an etcd cluster through gRPC. For languages with no gRPC support, etcd provides a JSON [grpc-gateway][grpc-gateway]. This gateway serves a RESTful proxy that translates HTTP/JSON requests into gRPC messages.
+
+
+## Using grpc-gateway
+
+The gateway accepts a [JSON mapping][json-mapping] for etcd's [protocol buffer][api-ref] message definitions. Note that `key` and `value` fields are defined as byte arrays and therefore must be base64 encoded in JSON.
+
+```bash
+<<COMMENT
+https://www.base64encode.org/
+foo is 'Zm9v' in Base64
+bar is 'YmFy'
+COMMENT
+
+curl -L http://localhost:2379/v3alpha/kv/put \
+	-X POST -d '{"key": "Zm9v", "value": "YmFy"}'
+
+curl -L http://localhost:2379/v3alpha/kv/range \
+	-X POST -d '{"key": "Zm9v"}'
+```
+
+
+## Swagger
+
+Generated [Swagger][swagger] API definitions can be found at [rpc.swagger.json][swagger-doc].
+
+[api-ref]: ./api_reference_v3.md
+[go-client]: https://github.com/coreos/etcd/tree/master/clientv3
+[etcdctl]: https://github.com/coreos/etcd/tree/master/etcdctl
+[grpc]: http://www.grpc.io/
+[grpc-gateway]: https://github.com/grpc-ecosystem/grpc-gateway
+[json-mapping]: https://developers.google.com/protocol-buffers/docs/proto3#json
+[swagger]: http://swagger.io/
+[swagger-doc]: apispec/swagger/rpc.swagger.json
+

Documentation/dev-guide/api_reference_v3.md

@@ -0,0 +1,835 @@
+### etcd API Reference
+
+
+This is a generated documentation. Please read the proto files for more.
+
+
+##### service `Auth` (etcdserver/etcdserverpb/rpc.proto)
+
+| Method | Request Type | Response Type | Description |
+| ------ | ------------ | ------------- | ----------- |
+| AuthEnable | AuthEnableRequest | AuthEnableResponse | AuthEnable enables authentication. |
+| AuthDisable | AuthDisableRequest | AuthDisableResponse | AuthDisable disables authentication. |
+| Authenticate | AuthenticateRequest | AuthenticateResponse | Authenticate processes an authenticate request. |
+| UserAdd | AuthUserAddRequest | AuthUserAddResponse | UserAdd adds a new user. |
+| UserGet | AuthUserGetRequest | AuthUserGetResponse | UserGet gets detailed user information. |
+| UserList | AuthUserListRequest | AuthUserListResponse | UserList gets a list of all users. |
+| UserDelete | AuthUserDeleteRequest | AuthUserDeleteResponse | UserDelete deletes a specified user. |
+| UserChangePassword | AuthUserChangePasswordRequest | AuthUserChangePasswordResponse | UserChangePassword changes the password of a specified user. |
+| UserGrantRole | AuthUserGrantRoleRequest | AuthUserGrantRoleResponse | UserGrant grants a role to a specified user. |
+| UserRevokeRole | AuthUserRevokeRoleRequest | AuthUserRevokeRoleResponse | UserRevokeRole revokes a role of specified user. |
+| RoleAdd | AuthRoleAddRequest | AuthRoleAddResponse | RoleAdd adds a new role. |
+| RoleGet | AuthRoleGetRequest | AuthRoleGetResponse | RoleGet gets detailed role information. |
+| RoleList | AuthRoleListRequest | AuthRoleListResponse | RoleList gets lists of all roles. |
+| RoleDelete | AuthRoleDeleteRequest | AuthRoleDeleteResponse | RoleDelete deletes a specified role. |
+| RoleGrantPermission | AuthRoleGrantPermissionRequest | AuthRoleGrantPermissionResponse | RoleGrantPermission grants a permission of a specified key or range to a specified role. |
+| RoleRevokePermission | AuthRoleRevokePermissionRequest | AuthRoleRevokePermissionResponse | RoleRevokePermission revokes a key or range permission of a specified role. |
+
+
+
+##### service `Cluster` (etcdserver/etcdserverpb/rpc.proto)
+
+| Method | Request Type | Response Type | Description |
+| ------ | ------------ | ------------- | ----------- |
+| MemberAdd | MemberAddRequest | MemberAddResponse | MemberAdd adds a member into the cluster. |
+| MemberRemove | MemberRemoveRequest | MemberRemoveResponse | MemberRemove removes an existing member from the cluster. |
+| MemberUpdate | MemberUpdateRequest | MemberUpdateResponse | MemberUpdate updates the member configuration. |
+| MemberList | MemberListRequest | MemberListResponse | MemberList lists all the members in the cluster. |
+
+
+
+##### service `KV` (etcdserver/etcdserverpb/rpc.proto)
+
+for grpc-gateway
+
+| Method | Request Type | Response Type | Description |
+| ------ | ------------ | ------------- | ----------- |
+| Range | RangeRequest | RangeResponse | Range gets the keys in the range from the key-value store. |
+| Put | PutRequest | PutResponse | Put puts the given key into the key-value store. A put request increments the revision of the key-value store and generates one event in the event history. |
+| DeleteRange | DeleteRangeRequest | DeleteRangeResponse | DeleteRange deletes the given range from the key-value store. A delete request increments the revision of the key-value store and generates a delete event in the event history for every deleted key. |
+| Txn | TxnRequest | TxnResponse | Txn processes multiple requests in a single transaction. A txn request increments the revision of the key-value store and generates events with the same revision for every completed request. It is not allowed to modify the same key several times within one txn. |
+| Compact | CompactionRequest | CompactionResponse | Compact compacts the event history in the etcd key-value store. The key-value store should be periodically compacted or the event history will continue to grow indefinitely. |
+
+
+
+##### service `Lease` (etcdserver/etcdserverpb/rpc.proto)
+
+| Method | Request Type | Response Type | Description |
+| ------ | ------------ | ------------- | ----------- |
+| LeaseGrant | LeaseGrantRequest | LeaseGrantResponse | LeaseGrant creates a lease which expires if the server does not receive a keepAlive within a given time to live period. All keys attached to the lease will be expired and deleted if the lease expires. Each expired key generates a delete event in the event history. |
+| LeaseRevoke | LeaseRevokeRequest | LeaseRevokeResponse | LeaseRevoke revokes a lease. All keys attached to the lease will expire and be deleted. |
+| LeaseKeepAlive | LeaseKeepAliveRequest | LeaseKeepAliveResponse | LeaseKeepAlive keeps the lease alive by streaming keep alive requests from the client to the server and streaming keep alive responses from the server to the client. |
+
+
+
+##### service `Maintenance` (etcdserver/etcdserverpb/rpc.proto)
+
+| Method | Request Type | Response Type | Description |
+| ------ | ------------ | ------------- | ----------- |
+| Alarm | AlarmRequest | AlarmResponse | Alarm activates, deactivates, and queries alarms regarding cluster health. |
+| Status | StatusRequest | StatusResponse | Status gets the status of the member. |
+| Defragment | DefragmentRequest | DefragmentResponse | Defragment defragments a member's backend database to recover storage space. |
+| Hash | HashRequest | HashResponse | Hash returns the hash of the local KV state for consistency checking purpose. This is designed for testing; do not use this in production when there are ongoing transactions. |
+| Snapshot | SnapshotRequest | SnapshotResponse | Snapshot sends a snapshot of the entire backend from a member over a stream to a client. |
+
+
+
+##### service `Watch` (etcdserver/etcdserverpb/rpc.proto)
+
+| Method | Request Type | Response Type | Description |
+| ------ | ------------ | ------------- | ----------- |
+| Watch | WatchRequest | WatchResponse | Watch watches for events happening or that have happened. Both input and output are streams; the input stream is for creating and canceling watchers and the output stream sends events. One watch RPC can watch on multiple key ranges, streaming events for several watches at once. The entire event history can be watched starting from the last compaction revision. |
+
+
+
+##### message `AlarmMember` (etcdserver/etcdserverpb/rpc.proto)
+
+| Field | Description | Type |
+| ----- | ----------- | ---- |
+| memberID | memberID is the ID of the member associated with the raised alarm. | uint64 |
+| alarm | alarm is the type of alarm which has been raised. | AlarmType |
+
+
+
+##### message `AlarmRequest` (etcdserver/etcdserverpb/rpc.proto)
+
+default, used to query if any alarm is active space quota is exhausted
+
+| Field | Description | Type |
+| ----- | ----------- | ---- |
+| action | action is the kind of alarm request to issue. The action may GET alarm statuses, ACTIVATE an alarm, or DEACTIVATE a raised alarm. | AlarmAction |
+| memberID | memberID is the ID of the member associated with the alarm. If memberID is 0, the alarm request covers all members. | uint64 |
+| alarm | alarm is the type of alarm to consider for this request. | AlarmType |
+
+
+
+##### message `AlarmResponse` (etcdserver/etcdserverpb/rpc.proto)
+
+| Field | Description | Type |
+| ----- | ----------- | ---- |
+| header |  | ResponseHeader |
+| alarms | alarms is a list of alarms associated with the alarm request. | (slice of) AlarmMember |
+
+
+
+##### message `AuthDisableRequest` (etcdserver/etcdserverpb/rpc.proto)
+
+Empty field.
+
+
+
+##### message `AuthDisableResponse` (etcdserver/etcdserverpb/rpc.proto)
+
+| Field | Description | Type |
+| ----- | ----------- | ---- |
+| header |  | ResponseHeader |
+
+
+
+##### message `AuthEnableRequest` (etcdserver/etcdserverpb/rpc.proto)
+
+Empty field.
+
+
+
+##### message `AuthEnableResponse` (etcdserver/etcdserverpb/rpc.proto)
+
+| Field | Description | Type |
+| ----- | ----------- | ---- |
+| header |  | ResponseHeader |
+
+
+
+##### message `AuthRoleAddRequest` (etcdserver/etcdserverpb/rpc.proto)
+
+| Field | Description | Type |
+| ----- | ----------- | ---- |
+| name | name is the name of the role to add to the authentication system. | string |
+
+
+
+##### message `AuthRoleAddResponse` (etcdserver/etcdserverpb/rpc.proto)
+
+| Field | Description | Type |
+| ----- | ----------- | ---- |
+| header |  | ResponseHeader |
+
+
+
+##### message `AuthRoleDeleteRequest` (etcdserver/etcdserverpb/rpc.proto)
+
+| Field | Description | Type |
+| ----- | ----------- | ---- |
+| role |  | string |
+
+
+
+##### message `AuthRoleDeleteResponse` (etcdserver/etcdserverpb/rpc.proto)
+
+| Field | Description | Type |
+| ----- | ----------- | ---- |
+| header |  | ResponseHeader |
+
+
+
+##### message `AuthRoleGetRequest` (etcdserver/etcdserverpb/rpc.proto)
+
+| Field | Description | Type |
+| ----- | ----------- | ---- |
+| role |  | string |
+
+
+
+##### message `AuthRoleGetResponse` (etcdserver/etcdserverpb/rpc.proto)
+
+| Field | Description | Type |
+| ----- | ----------- | ---- |
+| header |  | ResponseHeader |
+| perm |  | (slice of) authpb.Permission |
+
+
+
+##### message `AuthRoleGrantPermissionRequest` (etcdserver/etcdserverpb/rpc.proto)
+
+| Field | Description | Type |
+| ----- | ----------- | ---- |
+| name | name is the name of the role which will be granted the permission. | string |
+| perm | perm is the permission to grant to the role. | authpb.Permission |
+
+
+
+##### message `AuthRoleGrantPermissionResponse` (etcdserver/etcdserverpb/rpc.proto)
+
+| Field | Description | Type |
+| ----- | ----------- | ---- |
+| header |  | ResponseHeader |
+
+
+
+##### message `AuthRoleListRequest` (etcdserver/etcdserverpb/rpc.proto)
+
+Empty field.
+
+
+
+##### message `AuthRoleListResponse` (etcdserver/etcdserverpb/rpc.proto)
+
+| Field | Description | Type |
+| ----- | ----------- | ---- |
+| header |  | ResponseHeader |
+| roles |  | (slice of) string |
+
+
+
+##### message `AuthRoleRevokePermissionRequest` (etcdserver/etcdserverpb/rpc.proto)
+
+| Field | Description | Type |
+| ----- | ----------- | ---- |
+| role |  | string |
+| key |  | string |
+| range_end |  | string |
+
+
+
+##### message `AuthRoleRevokePermissionResponse` (etcdserver/etcdserverpb/rpc.proto)
+
+| Field | Description | Type |
+| ----- | ----------- | ---- |
+| header |  | ResponseHeader |
+
+
+
+##### message `AuthUserAddRequest` (etcdserver/etcdserverpb/rpc.proto)
+
+| Field | Description | Type |
+| ----- | ----------- | ---- |
+| name |  | string |
+| password |  | string |
+
+
+
+##### message `AuthUserAddResponse` (etcdserver/etcdserverpb/rpc.proto)
+
+| Field | Description | Type |
+| ----- | ----------- | ---- |
+| header |  | ResponseHeader |
+
+
+
+##### message `AuthUserChangePasswordRequest` (etcdserver/etcdserverpb/rpc.proto)
+
+| Field | Description | Type |
+| ----- | ----------- | ---- |
+| name | name is the name of the user whose password is being changed. | string |
+| password | password is the new password for the user. | string |
+
+
+
+##### message `AuthUserChangePasswordResponse` (etcdserver/etcdserverpb/rpc.proto)
+
+| Field | Description | Type |
+| ----- | ----------- | ---- |
+| header |  | ResponseHeader |
+
+
+
+##### message `AuthUserDeleteRequest` (etcdserver/etcdserverpb/rpc.proto)
+
+| Field | Description | Type |
+| ----- | ----------- | ---- |
+| name | name is the name of the user to delete. | string |
+
+
+
+##### message `AuthUserDeleteResponse` (etcdserver/etcdserverpb/rpc.proto)
+
+| Field | Description | Type |
+| ----- | ----------- | ---- |
+| header |  | ResponseHeader |
+
+
+
+##### message `AuthUserGetRequest` (etcdserver/etcdserverpb/rpc.proto)
+
+| Field | Description | Type |
+| ----- | ----------- | ---- |
+| name |  | string |
+
+
+
+##### message `AuthUserGetResponse` (etcdserver/etcdserverpb/rpc.proto)
+
+| Field | Description | Type |
+| ----- | ----------- | ---- |
+| header |  | ResponseHeader |
+| roles |  | (slice of) string |
+
+
+
+##### message `AuthUserGrantRoleRequest` (etcdserver/etcdserverpb/rpc.proto)
+
+| Field | Description | Type |
+| ----- | ----------- | ---- |
+| user | user is the name of the user which should be granted a given role. | string |
+| role | role is the name of the role to grant to the user. | string |
+
+
+
+##### message `AuthUserGrantRoleResponse` (etcdserver/etcdserverpb/rpc.proto)
+
+| Field | Description | Type |
+| ----- | ----------- | ---- |
+| header |  | ResponseHeader |
+
+
+
+##### message `AuthUserListRequest` (etcdserver/etcdserverpb/rpc.proto)
+
+Empty field.
+
+
+
+##### message `AuthUserListResponse` (etcdserver/etcdserverpb/rpc.proto)
+
+| Field | Description | Type |
+| ----- | ----------- | ---- |
+| header |  | ResponseHeader |
+| users |  | (slice of) string |
+
+
+
+##### message `AuthUserRevokeRoleRequest` (etcdserver/etcdserverpb/rpc.proto)
+
+| Field | Description | Type |
+| ----- | ----------- | ---- |
+| name |  | string |
+| role |  | string |
+
+
+
+##### message `AuthUserRevokeRoleResponse` (etcdserver/etcdserverpb/rpc.proto)
+
+| Field | Description | Type |
+| ----- | ----------- | ---- |
+| header |  | ResponseHeader |
+
+
+
+##### message `AuthenticateRequest` (etcdserver/etcdserverpb/rpc.proto)
+
+| Field | Description | Type |
+| ----- | ----------- | ---- |
+| name |  | string |
+| password |  | string |
+
+
+
+##### message `AuthenticateResponse` (etcdserver/etcdserverpb/rpc.proto)
+
+| Field | Description | Type |
+| ----- | ----------- | ---- |
+| header |  | ResponseHeader |
+| token | token is an authorized token that can be used in succeeding RPCs | string |
+
+
+
+##### message `CompactionRequest` (etcdserver/etcdserverpb/rpc.proto)
+
+CompactionRequest compacts the key-value store up to a given revision. All superseded keys with a revision less than the compaction revision will be removed.
+
+| Field | Description | Type |
+| ----- | ----------- | ---- |
+| revision | revision is the key-value store revision for the compaction operation. | int64 |
+| physical | physical is set so the RPC will wait until the compaction is physically applied to the local database such that compacted entries are totally removed from the backend database. | bool |
+
+
+
+##### message `CompactionResponse` (etcdserver/etcdserverpb/rpc.proto)
+
+| Field | Description | Type |
+| ----- | ----------- | ---- |
+| header |  | ResponseHeader |
+
+
+
+##### message `Compare` (etcdserver/etcdserverpb/rpc.proto)
+
+| Field | Description | Type |
+| ----- | ----------- | ---- |
+| result | result is logical comparison operation for this comparison. | CompareResult |
+| target | target is the key-value field to inspect for the comparison. | CompareTarget |
+| key | key is the subject key for the comparison operation. | bytes |
+| target_union |  | oneof |
+| version | version is the version of the given key | int64 |
+| create_revision | create_revision is the creation revision of the given key | int64 |
+| mod_revision | mod_revision is the last modified revision of the given key. | int64 |
+| value | value is the value of the given key, in bytes. | bytes |
+
+
+
+##### message `DefragmentRequest` (etcdserver/etcdserverpb/rpc.proto)
+
+Empty field.
+
+
+
+##### message `DefragmentResponse` (etcdserver/etcdserverpb/rpc.proto)
+
+| Field | Description | Type |
+| ----- | ----------- | ---- |
+| header |  | ResponseHeader |
+
+
+
+##### message `DeleteRangeRequest` (etcdserver/etcdserverpb/rpc.proto)
+
+| Field | Description | Type |
+| ----- | ----------- | ---- |
+| key | key is the first key to delete in the range. | bytes |
+| range_end | range_end is the key following the last key to delete for the range [key, range_end). If range_end is not given, the range is defined to contain only the key argument. If range_end is '\0', the range is all keys greater than or equal to the key argument. | bytes |
+| prev_kv | If prev_kv is set, etcd gets the previous key-value pairs before deleting it. The previous key-value pairs will be returned in the delte response. | bool |
+
+
+
+##### message `DeleteRangeResponse` (etcdserver/etcdserverpb/rpc.proto)
+
+| Field | Description | Type |
+| ----- | ----------- | ---- |
+| header |  | ResponseHeader |
+| deleted | deleted is the number of keys deleted by the delete range request. | int64 |
+| prev_kvs | if prev_kv is set in the request, the previous key-value pairs will be returned. | (slice of) mvccpb.KeyValue |
+
+
+
+##### message `HashRequest` (etcdserver/etcdserverpb/rpc.proto)
+
+Empty field.
+
+
+
+##### message `HashResponse` (etcdserver/etcdserverpb/rpc.proto)
+
+| Field | Description | Type |
+| ----- | ----------- | ---- |
+| header |  | ResponseHeader |
+| hash | hash is the hash value computed from the responding member's key-value store. | uint32 |
+
+
+
+##### message `LeaseGrantRequest` (etcdserver/etcdserverpb/rpc.proto)
+
+| Field | Description | Type |
+| ----- | ----------- | ---- |
+| TTL | TTL is the advisory time-to-live in seconds. | int64 |
+| ID | ID is the requested ID for the lease. If ID is set to 0, the lessor chooses an ID. | int64 |
+
+
+
+##### message `LeaseGrantResponse` (etcdserver/etcdserverpb/rpc.proto)
+
+| Field | Description | Type |
+| ----- | ----------- | ---- |
+| header |  | ResponseHeader |
+| ID | ID is the lease ID for the granted lease. | int64 |
+| TTL | TTL is the server chosen lease time-to-live in seconds. | int64 |
+| error |  | string |
+
+
+
+##### message `LeaseKeepAliveRequest` (etcdserver/etcdserverpb/rpc.proto)
+
+| Field | Description | Type |
+| ----- | ----------- | ---- |
+| ID | ID is the lease ID for the lease to keep alive. | int64 |
+
+
+
+##### message `LeaseKeepAliveResponse` (etcdserver/etcdserverpb/rpc.proto)
+
+| Field | Description | Type |
+| ----- | ----------- | ---- |
+| header |  | ResponseHeader |
+| ID | ID is the lease ID from the keep alive request. | int64 |
+| TTL | TTL is the new time-to-live for the lease. | int64 |
+
+
+
+##### message `LeaseRevokeRequest` (etcdserver/etcdserverpb/rpc.proto)
+
+| Field | Description | Type |
+| ----- | ----------- | ---- |
+| ID | ID is the lease ID to revoke. When the ID is revoked, all associated keys will be deleted. | int64 |
+
+
+
+##### message `LeaseRevokeResponse` (etcdserver/etcdserverpb/rpc.proto)
+
+| Field | Description | Type |
+| ----- | ----------- | ---- |
+| header |  | ResponseHeader |
+
+
+
+##### message `Member` (etcdserver/etcdserverpb/rpc.proto)
+
+| Field | Description | Type |
+| ----- | ----------- | ---- |
+| ID | ID is the member ID for this member. | uint64 |
+| name | name is the human-readable name of the member. If the member is not started, the name will be an empty string. | string |
+| peerURLs | peerURLs is the list of URLs the member exposes to the cluster for communication. | (slice of) string |
+| clientURLs | clientURLs is the list of URLs the member exposes to clients for communication. If the member is not started, clientURLs will be empty. | (slice of) string |
+
+
+
+##### message `MemberAddRequest` (etcdserver/etcdserverpb/rpc.proto)
+
+| Field | Description | Type |
+| ----- | ----------- | ---- |
+| peerURLs | peerURLs is the list of URLs the added member will use to communicate with the cluster. | (slice of) string |
+
+
+
+##### message `MemberAddResponse` (etcdserver/etcdserverpb/rpc.proto)
+
+| Field | Description | Type |
+| ----- | ----------- | ---- |
+| header |  | ResponseHeader |
+| member | member is the member information for the added member. | Member |
+
+
+
+##### message `MemberListRequest` (etcdserver/etcdserverpb/rpc.proto)
+
+Empty field.
+
+
+
+##### message `MemberListResponse` (etcdserver/etcdserverpb/rpc.proto)
+
+| Field | Description | Type |
+| ----- | ----------- | ---- |
+| header |  | ResponseHeader |
+| members | members is a list of all members associated with the cluster. | (slice of) Member |
+
+
+
+##### message `MemberRemoveRequest` (etcdserver/etcdserverpb/rpc.proto)
+
+| Field | Description | Type |
+| ----- | ----------- | ---- |
+| ID | ID is the member ID of the member to remove. | uint64 |
+
+
+
+##### message `MemberRemoveResponse` (etcdserver/etcdserverpb/rpc.proto)
+
+| Field | Description | Type |
+| ----- | ----------- | ---- |
+| header |  | ResponseHeader |
+
+
+
+##### message `MemberUpdateRequest` (etcdserver/etcdserverpb/rpc.proto)
+
+| Field | Description | Type |
+| ----- | ----------- | ---- |
+| ID | ID is the member ID of the member to update. | uint64 |
+| peerURLs | peerURLs is the new list of URLs the member will use to communicate with the cluster. | (slice of) string |
+
+
+
+##### message `MemberUpdateResponse` (etcdserver/etcdserverpb/rpc.proto)
+
+| Field | Description | Type |
+| ----- | ----------- | ---- |
+| header |  | ResponseHeader |
+
+
+
+##### message `PutRequest` (etcdserver/etcdserverpb/rpc.proto)
+
+| Field | Description | Type |
+| ----- | ----------- | ---- |
+| key | key is the key, in bytes, to put into the key-value store. | bytes |
+| value | value is the value, in bytes, to associate with the key in the key-value store. | bytes |
+| lease | lease is the lease ID to associate with the key in the key-value store. A lease value of 0 indicates no lease. | int64 |
+| prev_kv | If prev_kv is set, etcd gets the previous key-value pair before changing it. The previous key-value pair will be returned in the put response. | bool |
+
+
+
+##### message `PutResponse` (etcdserver/etcdserverpb/rpc.proto)
+
+| Field | Description | Type |
+| ----- | ----------- | ---- |
+| header |  | ResponseHeader |
+| prev_kv | if prev_kv is set in the request, the previous key-value pair will be returned. | mvccpb.KeyValue |
+
+
+
+##### message `RangeRequest` (etcdserver/etcdserverpb/rpc.proto)
+
+| Field | Description | Type |
+| ----- | ----------- | ---- |
+| key | default, no sorting lowest target value first highest target value first key is the first key for the range. If range_end is not given, the request only looks up key. | bytes |
+| range_end | range_end is the upper bound on the requested range [key, range_end). If range_end is '\0', the range is all keys >= key. If the range_end is one bit larger than the given key, then the range requests get the all keys with the prefix (the given key). If both key and range_end are '\0', then range requests returns all keys. | bytes |
+| limit | limit is a limit on the number of keys returned for the request. | int64 |
+| revision | revision is the point-in-time of the key-value store to use for the range. If revision is less or equal to zero, the range is over the newest key-value store. If the revision has been compacted, ErrCompacted is returned as a response. | int64 |
+| sort_order | sort_order is the order for returned sorted results. | SortOrder |
+| sort_target | sort_target is the key-value field to use for sorting. | SortTarget |
+| serializable | serializable sets the range request to use serializable member-local reads. Range requests are linearizable by default; linearizable requests have higher latency and lower throughput than serializable requests but reflect the current consensus of the cluster. For better performance, in exchange for possible stale reads, a serializable range request is served locally without needing to reach consensus with other nodes in the cluster. | bool |
+| keys_only | keys_only when set returns only the keys and not the values. | bool |
+| count_only | count_only when set returns only the count of the keys in the range. | bool |
+
+
+
+##### message `RangeResponse` (etcdserver/etcdserverpb/rpc.proto)
+
+| Field | Description | Type |
+| ----- | ----------- | ---- |
+| header |  | ResponseHeader |
+| kvs | kvs is the list of key-value pairs matched by the range request. kvs is empty when count is requested. | (slice of) mvccpb.KeyValue |
+| more | more indicates if there are more keys to return in the requested range. | bool |
+| count | count is set to the number of keys within the range when requested. | int64 |
+
+
+
+##### message `RequestOp` (etcdserver/etcdserverpb/rpc.proto)
+
+| Field | Description | Type |
+| ----- | ----------- | ---- |
+| request | request is a union of request types accepted by a transaction. | oneof |
+| request_range |  | RangeRequest |
+| request_put |  | PutRequest |
+| request_delete_range |  | DeleteRangeRequest |
+
+
+
+##### message `ResponseHeader` (etcdserver/etcdserverpb/rpc.proto)
+
+| Field | Description | Type |
+| ----- | ----------- | ---- |
+| cluster_id | cluster_id is the ID of the cluster which sent the response. | uint64 |
+| member_id | member_id is the ID of the member which sent the response. | uint64 |
+| revision | revision is the key-value store revision when the request was applied. | int64 |
+| raft_term | raft_term is the raft term when the request was applied. | uint64 |
+
+
+
+##### message `ResponseOp` (etcdserver/etcdserverpb/rpc.proto)
+
+| Field | Description | Type |
+| ----- | ----------- | ---- |
+| response | response is a union of response types returned by a transaction. | oneof |
+| response_range |  | RangeResponse |
+| response_put |  | PutResponse |
+| response_delete_range |  | DeleteRangeResponse |
+
+
+
+##### message `SnapshotRequest` (etcdserver/etcdserverpb/rpc.proto)
+
+Empty field.
+
+
+
+##### message `SnapshotResponse` (etcdserver/etcdserverpb/rpc.proto)
+
+| Field | Description | Type |
+| ----- | ----------- | ---- |
+| header | header has the current key-value store information. The first header in the snapshot stream indicates the point in time of the snapshot. | ResponseHeader |
+| remaining_bytes | remaining_bytes is the number of blob bytes to be sent after this message | uint64 |
+| blob | blob contains the next chunk of the snapshot in the snapshot stream. | bytes |
+
+
+
+##### message `StatusRequest` (etcdserver/etcdserverpb/rpc.proto)
+
+Empty field.
+
+
+
+##### message `StatusResponse` (etcdserver/etcdserverpb/rpc.proto)
+
+| Field | Description | Type |
+| ----- | ----------- | ---- |
+| header |  | ResponseHeader |
+| version | version is the cluster protocol version used by the responding member. | string |
+| dbSize | dbSize is the size of the backend database, in bytes, of the responding member. | int64 |
+| leader | leader is the member ID which the responding member believes is the current leader. | uint64 |
+| raftIndex | raftIndex is the current raft index of the responding member. | uint64 |
+| raftTerm | raftTerm is the current raft term of the responding member. | uint64 |
+
+
+
+##### message `TxnRequest` (etcdserver/etcdserverpb/rpc.proto)
+
+From google paxosdb paper: Our implementation hinges around a powerful primitive which we call MultiOp. All other database operations except for iteration are implemented as a single call to MultiOp. A MultiOp is applied atomically and consists of three components: 1. A list of tests called guard. Each test in guard checks a single entry in the database. It may check for the absence or presence of a value, or compare with a given value. Two different tests in the guard may apply to the same or different entries in the database. All tests in the guard are applied and MultiOp returns the results. If all tests are true, MultiOp executes t op (see item 2 below), otherwise it executes f op (see item 3 below). 2. A list of database operations called t op. Each operation in the list is either an insert, delete, or lookup operation, and applies to a single database entry. Two different operations in the list may apply to the same or different entries in the database. These operations are executed if guard evaluates to true. 3. A list of database operations called f op. Like t op, but executed if guard evaluates to false.
+
+| Field | Description | Type |
+| ----- | ----------- | ---- |
+| compare | compare is a list of predicates representing a conjunction of terms. If the comparisons succeed, then the success requests will be processed in order, and the response will contain their respective responses in order. If the comparisons fail, then the failure requests will be processed in order, and the response will contain their respective responses in order. | (slice of) Compare |
+| success | success is a list of requests which will be applied when compare evaluates to true. | (slice of) RequestOp |
+| failure | failure is a list of requests which will be applied when compare evaluates to false. | (slice of) RequestOp |
+
+
+
+##### message `TxnResponse` (etcdserver/etcdserverpb/rpc.proto)
+
+| Field | Description | Type |
+| ----- | ----------- | ---- |
+| header |  | ResponseHeader |
+| succeeded | succeeded is set to true if the compare evaluated to true or false otherwise. | bool |
+| responses | responses is a list of responses corresponding to the results from applying success if succeeded is true or failure if succeeded is false. | (slice of) ResponseOp |
+
+
+
+##### message `WatchCancelRequest` (etcdserver/etcdserverpb/rpc.proto)
+
+| Field | Description | Type |
+| ----- | ----------- | ---- |
+| watch_id | watch_id is the watcher id to cancel so that no more events are transmitted. | int64 |
+
+
+
+##### message `WatchCreateRequest` (etcdserver/etcdserverpb/rpc.proto)
+
+| Field | Description | Type |
+| ----- | ----------- | ---- |
+| key | key is the key to register for watching. | bytes |
+| range_end | range_end is the end of the range [key, range_end) to watch. If range_end is not given, only the key argument is watched. If range_end is equal to '\0', all keys greater than or equal to the key argument are watched. | bytes |
+| start_revision | start_revision is an optional revision to watch from (inclusive). No start_revision is "now". | int64 |
+| progress_notify | progress_notify is set so that the etcd server will periodically send a WatchResponse with no events to the new watcher if there are no recent events. It is useful when clients wish to recover a disconnected watcher starting from a recent known revision. The etcd server may decide how often it will send notifications based on current load. | bool |
+| prev_kv | If prev_kv is set, created watcher gets the previous KV before the event happens. If the previous KV is already compacted, nothing will be returned. | bool |
+
+
+
+##### message `WatchRequest` (etcdserver/etcdserverpb/rpc.proto)
+
+| Field | Description | Type |
+| ----- | ----------- | ---- |
+| request_union | request_union is a request to either create a new watcher or cancel an existing watcher. | oneof |
+| create_request |  | WatchCreateRequest |
+| cancel_request |  | WatchCancelRequest |
+
+
+
+##### message `WatchResponse` (etcdserver/etcdserverpb/rpc.proto)
+
+| Field | Description | Type |
+| ----- | ----------- | ---- |
+| header |  | ResponseHeader |
+| watch_id | watch_id is the ID of the watcher that corresponds to the response. | int64 |
+| created | created is set to true if the response is for a create watch request. The client should record the watch_id and expect to receive events for the created watcher from the same stream. All events sent to the created watcher will attach with the same watch_id. | bool |
+| canceled | canceled is set to true if the response is for a cancel watch request. No further events will be sent to the canceled watcher. | bool |
+| compact_revision | compact_revision is set to the minimum index if a watcher tries to watch at a compacted index.  This happens when creating a watcher at a compacted revision or the watcher cannot catch up with the progress of the key-value store.  The client should treat the watcher as canceled and should not try to create any watcher with the same start_revision again. | int64 |
+| events |  | (slice of) mvccpb.Event |
+
+
+
+##### message `Event` (mvcc/mvccpb/kv.proto)
+
+| Field | Description | Type |
+| ----- | ----------- | ---- |
+| type | type is the kind of event. If type is a PUT, it indicates new data has been stored to the key. If type is a DELETE, it indicates the key was deleted. | EventType |
+| kv | kv holds the KeyValue for the event. A PUT event contains current kv pair. A PUT event with kv.Version=1 indicates the creation of a key. A DELETE/EXPIRE event contains the deleted key with its modification revision set to the revision of deletion. | KeyValue |
+| prev_kv | prev_kv holds the key-value pair before the event happens. | KeyValue |
+
+
+
+##### message `KeyValue` (mvcc/mvccpb/kv.proto)
+
+| Field | Description | Type |
+| ----- | ----------- | ---- |
+| key | key is the key in bytes. An empty key is not allowed. | bytes |
+| create_revision | create_revision is the revision of last creation on this key. | int64 |
+| mod_revision | mod_revision is the revision of last modification on this key. | int64 |
+| version | version is the version of the key. A deletion resets the version to zero and any modification of the key increases its version. | int64 |
+| value | value is the value held by the key, in bytes. | bytes |
+| lease | lease is the ID of the lease that attached to key. When the attached lease expires, the key will be deleted. If lease is 0, then no lease is attached to the key. | int64 |
+
+
+
+##### message `Lease` (lease/leasepb/lease.proto)
+
+| Field | Description | Type |
+| ----- | ----------- | ---- |
+| ID |  | int64 |
+| TTL |  | int64 |
+
+
+
+##### message `Permission` (auth/authpb/auth.proto)
+
+Permission is a single entity
+
+| Field | Description | Type |
+| ----- | ----------- | ---- |
+| permType |  | Type |
+| key |  | bytes |
+| range_end |  | bytes |
+
+
+
+##### message `Role` (auth/authpb/auth.proto)
+
+Role is a single entry in the bucket authRoles
+
+| Field | Description | Type |
+| ----- | ----------- | ---- |
+| name |  | bytes |
+| keyPermission |  | (slice of) Permission |
+
+
+
+##### message `User` (auth/authpb/auth.proto)
+
+User is a single entry in the bucket authUsers
+
+| Field | Description | Type |
+| ----- | ----------- | ---- |
+| name |  | bytes |
+| password |  | bytes |
+| roles |  | (slice of) string |
+
+
+

Documentation/dev-guide/apispec/swagger/v3election.swagger.json

@@ -1,430 +0,0 @@
-{
-  "swagger": "2.0",
-  "info": {
-    "title": "server/etcdserver/api/v3election/v3electionpb/v3election.proto",
-    "version": "version not set"
-  },
-  "consumes": [
-    "application/json"
-  ],
-  "produces": [
-    "application/json"
-  ],
-  "paths": {
-    "/v3/election/campaign": {
-      "post": {
-        "summary": "Campaign waits to acquire leadership in an election, returning a LeaderKey\nrepresenting the leadership if successful. The LeaderKey can then be used\nto issue new values on the election, transactionally guard API requests on\nleadership still being held, and resign from the election.",
-        "operationId": "Election_Campaign",
-        "responses": {
-          "200": {
-            "description": "A successful response.",
-            "schema": {
-              "$ref": "#/definitions/v3electionpbCampaignResponse"
-            }
-          },
-          "default": {
-            "description": "An unexpected error response.",
-            "schema": {
-              "$ref": "#/definitions/runtimeError"
-            }
-          }
-        },
-        "parameters": [
-          {
-            "name": "body",
-            "in": "body",
-            "required": true,
-            "schema": {
-              "$ref": "#/definitions/v3electionpbCampaignRequest"
-            }
-          }
-        ],
-        "tags": [
-          "Election"
-        ]
-      }
-    },
-    "/v3/election/leader": {
-      "post": {
-        "summary": "Leader returns the current election proclamation, if any.",
-        "operationId": "Election_Leader",
-        "responses": {
-          "200": {
-            "description": "A successful response.",
-            "schema": {
-              "$ref": "#/definitions/v3electionpbLeaderResponse"
-            }
-          },
-          "default": {
-            "description": "An unexpected error response.",
-            "schema": {
-              "$ref": "#/definitions/runtimeError"
-            }
-          }
-        },
-        "parameters": [
-          {
-            "name": "body",
-            "in": "body",
-            "required": true,
-            "schema": {
-              "$ref": "#/definitions/v3electionpbLeaderRequest"
-            }
-          }
-        ],
-        "tags": [
-          "Election"
-        ]
-      }
-    },
-    "/v3/election/observe": {
-      "post": {
-        "summary": "Observe streams election proclamations in-order as made by the election's\nelected leaders.",
-        "operationId": "Election_Observe",
-        "responses": {
-          "200": {
-            "description": "A successful response.(streaming responses)",
-            "schema": {
-              "type": "object",
-              "properties": {
-                "result": {
-                  "$ref": "#/definitions/v3electionpbLeaderResponse"
-                },
-                "error": {
-                  "$ref": "#/definitions/runtimeStreamError"
-                }
-              },
-              "title": "Stream result of v3electionpbLeaderResponse"
-            }
-          },
-          "default": {
-            "description": "An unexpected error response.",
-            "schema": {
-              "$ref": "#/definitions/runtimeError"
-            }
-          }
-        },
-        "parameters": [
-          {
-            "name": "body",
-            "in": "body",
-            "required": true,
-            "schema": {
-              "$ref": "#/definitions/v3electionpbLeaderRequest"
-            }
-          }
-        ],
-        "tags": [
-          "Election"
-        ]
-      }
-    },
-    "/v3/election/proclaim": {
-      "post": {
-        "summary": "Proclaim updates the leader's posted value with a new value.",
-        "operationId": "Election_Proclaim",
-        "responses": {
-          "200": {
-            "description": "A successful response.",
-            "schema": {
-              "$ref": "#/definitions/v3electionpbProclaimResponse"
-            }
-          },
-          "default": {
-            "description": "An unexpected error response.",
-            "schema": {
-              "$ref": "#/definitions/runtimeError"
-            }
-          }
-        },
-        "parameters": [
-          {
-            "name": "body",
-            "in": "body",
-            "required": true,
-            "schema": {
-              "$ref": "#/definitions/v3electionpbProclaimRequest"
-            }
-          }
-        ],
-        "tags": [
-          "Election"
-        ]
-      }
-    },
-    "/v3/election/resign": {
-      "post": {
-        "summary": "Resign releases election leadership so other campaigners may acquire\nleadership on the election.",
-        "operationId": "Election_Resign",
-        "responses": {
-          "200": {
-            "description": "A successful response.",
-            "schema": {
-              "$ref": "#/definitions/v3electionpbResignResponse"
-            }
-          },
-          "default": {
-            "description": "An unexpected error response.",
-            "schema": {
-              "$ref": "#/definitions/runtimeError"
-            }
-          }
-        },
-        "parameters": [
-          {
-            "name": "body",
-            "in": "body",
-            "required": true,
-            "schema": {
-              "$ref": "#/definitions/v3electionpbResignRequest"
-            }
-          }
-        ],
-        "tags": [
-          "Election"
-        ]
-      }
-    }
-  },
-  "definitions": {
-    "etcdserverpbResponseHeader": {
-      "type": "object",
-      "properties": {
-        "cluster_id": {
-          "type": "string",
-          "format": "uint64",
-          "description": "cluster_id is the ID of the cluster which sent the response."
-        },
-        "member_id": {
-          "type": "string",
-          "format": "uint64",
-          "description": "member_id is the ID of the member which sent the response."
-        },
-        "revision": {
-          "type": "string",
-          "format": "int64",
-          "description": "revision is the key-value store revision when the request was applied, and it's\nunset (so 0) in case of calls not interacting with key-value store.\nFor watch progress responses, the header.revision indicates progress. All future events\nreceived in this stream are guaranteed to have a higher revision number than the\nheader.revision number."
-        },
-        "raft_term": {
-          "type": "string",
-          "format": "uint64",
-          "description": "raft_term is the raft term when the request was applied."
-        }
-      }
-    },
-    "mvccpbKeyValue": {
-      "type": "object",
-      "properties": {
-        "key": {
-          "type": "string",
-          "format": "byte",
-          "description": "key is the key in bytes. An empty key is not allowed."
-        },
-        "create_revision": {
-          "type": "string",
-          "format": "int64",
-          "description": "create_revision is the revision of last creation on this key."
-        },
-        "mod_revision": {
-          "type": "string",
-          "format": "int64",
-          "description": "mod_revision is the revision of last modification on this key."
-        },
-        "version": {
-          "type": "string",
-          "format": "int64",
-          "description": "version is the version of the key. A deletion resets\nthe version to zero and any modification of the key\nincreases its version."
-        },
-        "value": {
-          "type": "string",
-          "format": "byte",
-          "description": "value is the value held by the key, in bytes."
-        },
-        "lease": {
-          "type": "string",
-          "format": "int64",
-          "description": "lease is the ID of the lease that attached to key.\nWhen the attached lease expires, the key will be deleted.\nIf lease is 0, then no lease is attached to the key."
-        }
-      }
-    },
-    "protobufAny": {
-      "type": "object",
-      "properties": {
-        "type_url": {
-          "type": "string",
-          "description": "A URL/resource name that uniquely identifies the type of the serialized\nprotocol buffer message. This string must contain at least\none \"/\" character. The last segment of the URL's path must represent\nthe fully qualified name of the type (as in\n`path/google.protobuf.Duration`). The name should be in a canonical form\n(e.g., leading \".\" is not accepted).\n\nIn practice, teams usually precompile into the binary all types that they\nexpect it to use in the context of Any. However, for URLs which use the\nscheme `http`, `https`, or no scheme, one can optionally set up a type\nserver that maps type URLs to message definitions as follows:\n\n* If no scheme is provided, `https` is assumed.\n* An HTTP GET on the URL must yield a [google.protobuf.Type][]\n  value in binary format, or produce an error.\n* Applications are allowed to cache lookup results based on the\n  URL, or have them precompiled into a binary to avoid any\n  lookup. Therefore, binary compatibility needs to be preserved\n  on changes to types. (Use versioned type names to manage\n  breaking changes.)\n\nNote: this functionality is not currently available in the official\nprotobuf release, and it is not used for type URLs beginning with\ntype.googleapis.com.\n\nSchemes other than `http`, `https` (or the empty scheme) might be\nused with implementation specific semantics."
-        },
-        "value": {
-          "type": "string",
-          "format": "byte",
-          "description": "Must be a valid serialized protocol buffer of the above specified type."
-        }
-      },
-      "description": "`Any` contains an arbitrary serialized protocol buffer message along with a\nURL that describes the type of the serialized message.\n\nProtobuf library provides support to pack/unpack Any values in the form\nof utility functions or additional generated methods of the Any type.\n\nExample 1: Pack and unpack a message in C++.\n\n    Foo foo = ...;\n    Any any;\n    any.PackFrom(foo);\n    ...\n    if (any.UnpackTo(\u0026foo)) {\n      ...\n    }\n\nExample 2: Pack and unpack a message in Java.\n\n    Foo foo = ...;\n    Any any = Any.pack(foo);\n    ...\n    if (any.is(Foo.class)) {\n      foo = any.unpack(Foo.class);\n    }\n\n Example 3: Pack and unpack a message in Python.\n\n    foo = Foo(...)\n    any = Any()\n    any.Pack(foo)\n    ...\n    if any.Is(Foo.DESCRIPTOR):\n      any.Unpack(foo)\n      ...\n\n Example 4: Pack and unpack a message in Go\n\n     foo := \u0026pb.Foo{...}\n     any, err := ptypes.MarshalAny(foo)\n     ...\n     foo := \u0026pb.Foo{}\n     if err := ptypes.UnmarshalAny(any, foo); err != nil {\n       ...\n     }\n\nThe pack methods provided by protobuf library will by default use\n'type.googleapis.com/full.type.name' as the type URL and the unpack\nmethods only use the fully qualified type name after the last '/'\nin the type URL, for example \"foo.bar.com/x/y.z\" will yield type\nname \"y.z\".\n\n\nJSON\n====\nThe JSON representation of an `Any` value uses the regular\nrepresentation of the deserialized, embedded message, with an\nadditional field `@type` which contains the type URL. Example:\n\n    package google.profile;\n    message Person {\n      string first_name = 1;\n      string last_name = 2;\n    }\n\n    {\n      \"@type\": \"type.googleapis.com/google.profile.Person\",\n      \"firstName\": \u003cstring\u003e,\n      \"lastName\": \u003cstring\u003e\n    }\n\nIf the embedded message type is well-known and has a custom JSON\nrepresentation, that representation will be embedded adding a field\n`value` which holds the custom JSON in addition to the `@type`\nfield. Example (for message [google.protobuf.Duration][]):\n\n    {\n      \"@type\": \"type.googleapis.com/google.protobuf.Duration\",\n      \"value\": \"1.212s\"\n    }"
-    },
-    "runtimeError": {
-      "type": "object",
-      "properties": {
-        "error": {
-          "type": "string"
-        },
-        "code": {
-          "type": "integer",
-          "format": "int32"
-        },
-        "message": {
-          "type": "string"
-        },
-        "details": {
-          "type": "array",
-          "items": {
-            "$ref": "#/definitions/protobufAny"
-          }
-        }
-      }
-    },
-    "runtimeStreamError": {
-      "type": "object",
-      "properties": {
-        "grpc_code": {
-          "type": "integer",
-          "format": "int32"
-        },
-        "http_code": {
-          "type": "integer",
-          "format": "int32"
-        },
-        "message": {
-          "type": "string"
-        },
-        "http_status": {
-          "type": "string"
-        },
-        "details": {
-          "type": "array",
-          "items": {
-            "$ref": "#/definitions/protobufAny"
-          }
-        }
-      }
-    },
-    "v3electionpbCampaignRequest": {
-      "type": "object",
-      "properties": {
-        "name": {
-          "type": "string",
-          "format": "byte",
-          "description": "name is the election's identifier for the campaign."
-        },
-        "lease": {
-          "type": "string",
-          "format": "int64",
-          "description": "lease is the ID of the lease attached to leadership of the election. If the\nlease expires or is revoked before resigning leadership, then the\nleadership is transferred to the next campaigner, if any."
-        },
-        "value": {
-          "type": "string",
-          "format": "byte",
-          "description": "value is the initial proclaimed value set when the campaigner wins the\nelection."
-        }
-      }
-    },
-    "v3electionpbCampaignResponse": {
-      "type": "object",
-      "properties": {
-        "header": {
-          "$ref": "#/definitions/etcdserverpbResponseHeader"
-        },
-        "leader": {
-          "$ref": "#/definitions/v3electionpbLeaderKey",
-          "description": "leader describes the resources used for holding leadereship of the election."
-        }
-      }
-    },
-    "v3electionpbLeaderKey": {
-      "type": "object",
-      "properties": {
-        "name": {
-          "type": "string",
-          "format": "byte",
-          "description": "name is the election identifier that correponds to the leadership key."
-        },
-        "key": {
-          "type": "string",
-          "format": "byte",
-          "description": "key is an opaque key representing the ownership of the election. If the key\nis deleted, then leadership is lost."
-        },
-        "rev": {
-          "type": "string",
-          "format": "int64",
-          "description": "rev is the creation revision of the key. It can be used to test for ownership\nof an election during transactions by testing the key's creation revision\nmatches rev."
-        },
-        "lease": {
-          "type": "string",
-          "format": "int64",
-          "description": "lease is the lease ID of the election leader."
-        }
-      }
-    },
-    "v3electionpbLeaderRequest": {
-      "type": "object",
-      "properties": {
-        "name": {
-          "type": "string",
-          "format": "byte",
-          "description": "name is the election identifier for the leadership information."
-        }
-      }
-    },
-    "v3electionpbLeaderResponse": {
-      "type": "object",
-      "properties": {
-        "header": {
-          "$ref": "#/definitions/etcdserverpbResponseHeader"
-        },
-        "kv": {
-          "$ref": "#/definitions/mvccpbKeyValue",
-          "description": "kv is the key-value pair representing the latest leader update."
-        }
-      }
-    },
-    "v3electionpbProclaimRequest": {
-      "type": "object",
-      "properties": {
-        "leader": {
-          "$ref": "#/definitions/v3electionpbLeaderKey",
-          "description": "leader is the leadership hold on the election."
-        },
-        "value": {
-          "type": "string",
-          "format": "byte",
-          "description": "value is an update meant to overwrite the leader's current value."
-        }
-      }
-    },
-    "v3electionpbProclaimResponse": {
-      "type": "object",
-      "properties": {
-        "header": {
-          "$ref": "#/definitions/etcdserverpbResponseHeader"
-        }
-      }
-    },
-    "v3electionpbResignRequest": {
-      "type": "object",
-      "properties": {
-        "leader": {
-          "$ref": "#/definitions/v3electionpbLeaderKey",
-          "description": "leader is the leadership to relinquish by resignation."
-        }
-      }
-    },
-    "v3electionpbResignResponse": {
-      "type": "object",
-      "properties": {
-        "header": {
-          "$ref": "#/definitions/etcdserverpbResponseHeader"
-        }
-      }
-    }
-  }
-}

Documentation/dev-guide/apispec/swagger/v3lock.swagger.json

@@ -1,190 +0,0 @@
-{
-  "swagger": "2.0",
-  "info": {
-    "title": "server/etcdserver/api/v3lock/v3lockpb/v3lock.proto",
-    "version": "version not set"
-  },
-  "consumes": [
-    "application/json"
-  ],
-  "produces": [
-    "application/json"
-  ],
-  "paths": {
-    "/v3/lock/lock": {
-      "post": {
-        "summary": "Lock acquires a distributed shared lock on a given named lock.\nOn success, it will return a unique key that exists so long as the\nlock is held by the caller. This key can be used in conjunction with\ntransactions to safely ensure updates to etcd only occur while holding\nlock ownership. The lock is held until Unlock is called on the key or the\nlease associate with the owner expires.",
-        "operationId": "Lock_Lock",
-        "responses": {
-          "200": {
-            "description": "A successful response.",
-            "schema": {
-              "$ref": "#/definitions/v3lockpbLockResponse"
-            }
-          },
-          "default": {
-            "description": "An unexpected error response.",
-            "schema": {
-              "$ref": "#/definitions/runtimeError"
-            }
-          }
-        },
-        "parameters": [
-          {
-            "name": "body",
-            "in": "body",
-            "required": true,
-            "schema": {
-              "$ref": "#/definitions/v3lockpbLockRequest"
-            }
-          }
-        ],
-        "tags": [
-          "Lock"
-        ]
-      }
-    },
-    "/v3/lock/unlock": {
-      "post": {
-        "summary": "Unlock takes a key returned by Lock and releases the hold on lock. The\nnext Lock caller waiting for the lock will then be woken up and given\nownership of the lock.",
-        "operationId": "Lock_Unlock",
-        "responses": {
-          "200": {
-            "description": "A successful response.",
-            "schema": {
-              "$ref": "#/definitions/v3lockpbUnlockResponse"
-            }
-          },
-          "default": {
-            "description": "An unexpected error response.",
-            "schema": {
-              "$ref": "#/definitions/runtimeError"
-            }
-          }
-        },
-        "parameters": [
-          {
-            "name": "body",
-            "in": "body",
-            "required": true,
-            "schema": {
-              "$ref": "#/definitions/v3lockpbUnlockRequest"
-            }
-          }
-        ],
-        "tags": [
-          "Lock"
-        ]
-      }
-    }
-  },
-  "definitions": {
-    "etcdserverpbResponseHeader": {
-      "type": "object",
-      "properties": {
-        "cluster_id": {
-          "type": "string",
-          "format": "uint64",
-          "description": "cluster_id is the ID of the cluster which sent the response."
-        },
-        "member_id": {
-          "type": "string",
-          "format": "uint64",
-          "description": "member_id is the ID of the member which sent the response."
-        },
-        "revision": {
-          "type": "string",
-          "format": "int64",
-          "description": "revision is the key-value store revision when the request was applied, and it's\nunset (so 0) in case of calls not interacting with key-value store.\nFor watch progress responses, the header.revision indicates progress. All future events\nreceived in this stream are guaranteed to have a higher revision number than the\nheader.revision number."
-        },
-        "raft_term": {
-          "type": "string",
-          "format": "uint64",
-          "description": "raft_term is the raft term when the request was applied."
-        }
-      }
-    },
-    "protobufAny": {
-      "type": "object",
-      "properties": {
-        "type_url": {
-          "type": "string",
-          "description": "A URL/resource name that uniquely identifies the type of the serialized\nprotocol buffer message. This string must contain at least\none \"/\" character. The last segment of the URL's path must represent\nthe fully qualified name of the type (as in\n`path/google.protobuf.Duration`). The name should be in a canonical form\n(e.g., leading \".\" is not accepted).\n\nIn practice, teams usually precompile into the binary all types that they\nexpect it to use in the context of Any. However, for URLs which use the\nscheme `http`, `https`, or no scheme, one can optionally set up a type\nserver that maps type URLs to message definitions as follows:\n\n* If no scheme is provided, `https` is assumed.\n* An HTTP GET on the URL must yield a [google.protobuf.Type][]\n  value in binary format, or produce an error.\n* Applications are allowed to cache lookup results based on the\n  URL, or have them precompiled into a binary to avoid any\n  lookup. Therefore, binary compatibility needs to be preserved\n  on changes to types. (Use versioned type names to manage\n  breaking changes.)\n\nNote: this functionality is not currently available in the official\nprotobuf release, and it is not used for type URLs beginning with\ntype.googleapis.com.\n\nSchemes other than `http`, `https` (or the empty scheme) might be\nused with implementation specific semantics."
-        },
-        "value": {
-          "type": "string",
-          "format": "byte",
-          "description": "Must be a valid serialized protocol buffer of the above specified type."
-        }
-      },
-      "description": "`Any` contains an arbitrary serialized protocol buffer message along with a\nURL that describes the type of the serialized message.\n\nProtobuf library provides support to pack/unpack Any values in the form\nof utility functions or additional generated methods of the Any type.\n\nExample 1: Pack and unpack a message in C++.\n\n    Foo foo = ...;\n    Any any;\n    any.PackFrom(foo);\n    ...\n    if (any.UnpackTo(\u0026foo)) {\n      ...\n    }\n\nExample 2: Pack and unpack a message in Java.\n\n    Foo foo = ...;\n    Any any = Any.pack(foo);\n    ...\n    if (any.is(Foo.class)) {\n      foo = any.unpack(Foo.class);\n    }\n\n Example 3: Pack and unpack a message in Python.\n\n    foo = Foo(...)\n    any = Any()\n    any.Pack(foo)\n    ...\n    if any.Is(Foo.DESCRIPTOR):\n      any.Unpack(foo)\n      ...\n\n Example 4: Pack and unpack a message in Go\n\n     foo := \u0026pb.Foo{...}\n     any, err := ptypes.MarshalAny(foo)\n     ...\n     foo := \u0026pb.Foo{}\n     if err := ptypes.UnmarshalAny(any, foo); err != nil {\n       ...\n     }\n\nThe pack methods provided by protobuf library will by default use\n'type.googleapis.com/full.type.name' as the type URL and the unpack\nmethods only use the fully qualified type name after the last '/'\nin the type URL, for example \"foo.bar.com/x/y.z\" will yield type\nname \"y.z\".\n\n\nJSON\n====\nThe JSON representation of an `Any` value uses the regular\nrepresentation of the deserialized, embedded message, with an\nadditional field `@type` which contains the type URL. Example:\n\n    package google.profile;\n    message Person {\n      string first_name = 1;\n      string last_name = 2;\n    }\n\n    {\n      \"@type\": \"type.googleapis.com/google.profile.Person\",\n      \"firstName\": \u003cstring\u003e,\n      \"lastName\": \u003cstring\u003e\n    }\n\nIf the embedded message type is well-known and has a custom JSON\nrepresentation, that representation will be embedded adding a field\n`value` which holds the custom JSON in addition to the `@type`\nfield. Example (for message [google.protobuf.Duration][]):\n\n    {\n      \"@type\": \"type.googleapis.com/google.protobuf.Duration\",\n      \"value\": \"1.212s\"\n    }"
-    },
-    "runtimeError": {
-      "type": "object",
-      "properties": {
-        "error": {
-          "type": "string"
-        },
-        "code": {
-          "type": "integer",
-          "format": "int32"
-        },
-        "message": {
-          "type": "string"
-        },
-        "details": {
-          "type": "array",
-          "items": {
-            "$ref": "#/definitions/protobufAny"
-          }
-        }
-      }
-    },
-    "v3lockpbLockRequest": {
-      "type": "object",
-      "properties": {
-        "name": {
-          "type": "string",
-          "format": "byte",
-          "description": "name is the identifier for the distributed shared lock to be acquired."
-        },
-        "lease": {
-          "type": "string",
-          "format": "int64",
-          "description": "lease is the ID of the lease that will be attached to ownership of the\nlock. If the lease expires or is revoked and currently holds the lock,\nthe lock is automatically released. Calls to Lock with the same lease will\nbe treated as a single acquisition; locking twice with the same lease is a\nno-op."
-        }
-      }
-    },
-    "v3lockpbLockResponse": {
-      "type": "object",
-      "properties": {
-        "header": {
-          "$ref": "#/definitions/etcdserverpbResponseHeader"
-        },
-        "key": {
-          "type": "string",
-          "format": "byte",
-          "description": "key is a key that will exist on etcd for the duration that the Lock caller\nowns the lock. Users should not modify this key or the lock may exhibit\nundefined behavior."
-        }
-      }
-    },
-    "v3lockpbUnlockRequest": {
-      "type": "object",
-      "properties": {
-        "key": {
-          "type": "string",
-          "format": "byte",
-          "description": "key is the lock ownership key granted by Lock."
-        }
-      }
-    },
-    "v3lockpbUnlockResponse": {
-      "type": "object",
-      "properties": {
-        "header": {
-          "$ref": "#/definitions/etcdserverpbResponseHeader"
-        }
-      }
-    }
-  }
-}

Documentation/dev-guide/experimental_apis.md

@@ -0,0 +1,8 @@
+# Experimental APIs and features
+
+For the most part, the etcd project is stable, but we are still moving fast! We believe in the release fast philosophy. We want to get early feedback on features still in development and stabilizing. Thus, there are, and will be more, experimental features and APIs. We plan to improve these features based on the early feedback from the community, or abandon them if there is little interest, in the next few releases. If you are running a production system, please do not rely on any experimental features or APIs.
+
+## The current experimental API/features are:
+
+- v3 auth API: expect to be stable in 3.1 release
+- etcd gateway: expect to be stable in 3.1 release

Documentation/dev-guide/interacting_v3.md

@@ -0,0 +1,243 @@
+# Interacting with etcd
+
+Users mostly interact with etcd by putting or getting the value of a key. This section describes how to do that by using etcdctl, a command line tool for interacting with etcd server. The concepts described here should apply to the gRPC APIs or client library APIs.
+
+By default, etcdctl talks to the etcd server with the v2 API for backward compatibility. For etcdctl to speak to etcd using the v3 API, the API version must be set to version 3 via the `ETCDCTL_API` environment variable.
+
+``` bash
+export ETCDCTL_API=3
+```
+
+## Write a key
+
+Applications store keys into the etcd cluster by writing to keys. Every stored key is replicated to all etcd cluster members through the Raft protocol to achieve consistency and reliability.
+
+Here is the command to set the value of key `foo` to `bar`:
+
+``` bash
+$ etcdctl put foo bar
+OK
+```
+
+## Read keys
+
+Applications can read values of keys from an etcd cluster. Queries may read a single key, or a range of keys. 
+
+Suppose the etcd cluster has stored the following keys:
+
+```
+foo = bar
+foo1 = bar1
+foo3 = bar3
+```
+
+Here is the command to read the value of key `foo`:
+
+```bash
+$ etcdctl get foo
+foo
+bar
+```
+
+Here is the command to range over the keys from `foo` to `foo9`:
+
+```bash
+$ etcdctl get foo foo9
+foo
+bar
+foo1
+bar1
+foo3
+bar3
+```
+
+## Read past version of keys
+
+Applications may want to read superseded versions of a key. For example, an application may wish to roll back to an old configuration by accessing an earlier version of a key. Alternatively, an application may want a consistent view over multiple keys through multiple requests by accessing key history.
+Since every modification to the etcd cluster key-value store increments the global revision of an etcd cluster, an application can read superseded keys by providing an older etcd revision.
+
+Suppose an etcd cluster already has the following keys:
+
+``` bash
+$ etcdctl put foo bar         # revision = 2
+$ etcdctl put foo1 bar1       # revision = 3
+$ etcdctl put foo bar_new     # revision = 4 
+$ etcdctl put foo1 bar1_new   # revision = 5
+```
+
+Here are an example to access the past versions of keys:
+
+```bash
+$ etcdctl get foo foo9 # access the most recent versions of keys
+foo
+bar_new
+foo1
+bar1_new
+
+$ etcdctl get --rev=4 foo foo9 # access the versions of keys at revision 4
+foo
+bar_new
+foo1
+bar1
+
+$ etcdctl get --rev=3 foo foo9 # access the versions of keys at revision 3
+foo
+bar
+foo1
+bar1
+
+$ etcdctl get --rev=2 foo foo9 # access the versions of keys at revision 2
+foo
+bar
+
+$ etcdctl get --rev=1 foo foo9 # access the versions of keys at revision 1
+```
+
+## Delete keys
+
+Applications can delete a key or a range of keys from an etcd cluster.
+
+Here is the command to delete key `foo`:
+
+```bash
+$ etcdctl del foo
+1 # one key is deleted
+```
+
+Here is the command to delete keys ranging from `foo` to `foo9`:
+
+```bash
+$ etcdctl del foo foo9
+2 # two keys are deleted
+```
+
+## Watch key changes
+
+Applications can watch on a key or a range of keys to monitor for any updates.
+
+Here is the command to watch on key `foo`:
+
+```bash
+$ etcdctl watch foo 
+# in another terminal: etcdctl put foo bar
+foo
+bar
+```
+
+Here is the command to watch on a range key from `foo` to `foo9`:
+
+```bash
+$ etcdctl watch foo foo9
+# in another terminal: etcdctl put foo bar
+foo
+bar
+# in another terminal: etcdctl put foo1 bar1
+foo1
+bar1
+```
+
+## Watch historical changes of keys
+
+Applications may want to watch for historical changes of keys in etcd. For example, an application may wish to receive all the modifications of a key; if the application stays connected to etcd, then `watch` is good enough. However, if the application or etcd fails, a change may happen during the failure, and the application will not receive the update in real time. To guarantee the update is delivered, the application must be able to watch for historical changes to keys. To do this, an application can specify a historical revision on a watch, just like reading past version of keys.
+
+Suppose we finished the following sequence of operations:
+
+``` bash
+etcdctl put foo bar         # revision = 2
+etcdctl put foo1 bar1       # revision = 3
+etcdctl put foo bar_new     # revision = 4 
+etcdctl put foo1 bar1_new   # revision = 5
+```
+
+Here is an example to watch the historical changes:
+```bash
+# watch for changes on key `foo` since revision 2
+$ etcdctl watch --rev=2 foo
+PUT
+foo
+bar
+PUT
+foo
+bar_new
+
+# watch for changes on key `foo` since revision 3
+$ etcdctl watch --rev=3 foo
+PUT
+foo
+bar_new
+```
+
+## Compacted revisions
+
+As we mentioned, etcd keeps revisions so that applications can read past versions of keys. However, to avoid accumulating an unbounded amount of history, it is important to compact past revisions. After compacting, etcd removes historical revisions, releasing resources for future use. All superseded data with revisions before the compacted revision will be unavailable.
+
+Here is the command to compact the revisions:
+
+```bash
+$ etcdctl compact 5
+compacted revision 5
+
+# any revisions before the compacted one are not accessible
+$ etcdctl get --rev=4 foo
+Error:  rpc error: code = 11 desc = etcdserver: mvcc: required revision has been compacted
+```
+
+## Grant leases
+
+Applications can grant leases for keys from an etcd cluster. When a key is attached to a lease, its lifetime is bound to the lease's lifetime which in turn is governed by a time-to-live (TTL). Each lease has a minimum time-to-live (TTL) value specified by the application at grant time. The lease's actual TTL value is at least the minimum TTL and is chosen by the etcd cluster. Once a lease's TTL elapses, the lease expires and all attached keys are deleted.
+
+Here is the command to grant a lease:
+
+```
+# grant a lease with 10 second TTL
+$ etcdctl lease grant 10
+lease 32695410dcc0ca06 granted with TTL(10s)
+
+# attach key foo to lease 32695410dcc0ca06
+$ etcdctl put --lease=32695410dcc0ca06 foo bar
+OK
+```
+
+## Revoke leases
+
+Applications revoke leases by lease ID. Revoking a lease deletes all of its attached keys.
+
+Suppose we finished the following sequence of operations:
+
+```
+$ etcdctl lease grant 10
+lease 32695410dcc0ca06 granted with TTL(10s)
+$ etcdctl put --lease=32695410dcc0ca06 foo bar
+OK
+```
+
+Here is the command to revoke the same lease:
+
+```
+$ etcdctl lease revoke 32695410dcc0ca06
+lease 32695410dcc0ca06 revoked
+
+$ etcdctl get foo
+# empty response since foo is deleted due to lease revocation
+```
+
+## Keep leases alive
+
+Applications can keep a lease alive by refreshing its TTL so it does not expire.
+
+Suppose we finished the following sequence of operations:
+
+```
+$ etcdctl lease grant 10
+lease 32695410dcc0ca06 granted with TTL(10s)
+```
+
+Here is the command to keep the same lease alive:
+
+```
+$ etcdctl lease keep-alive 32695410dcc0ca0
+lease 32695410dcc0ca0 keepalived with TTL(100)
+lease 32695410dcc0ca0 keepalived with TTL(100)
+lease 32695410dcc0ca0 keepalived with TTL(100)
+...
+```

Documentation/dev-guide/local_cluster.md

@@ -0,0 +1,90 @@
+# Setup a local cluster
+
+For testing and development deployments, the quickest and easiest way is to set up a local cluster. For a production deployment, refer to the [clustering][clustering] section.
+
+## Local standalone cluster
+
+Deploying an etcd cluster as a standalone cluster is straightforward. Start it with just one command:
+
+```
+$ ./etcd
+...
+```
+
+The started etcd member listens on `localhost:2379` for client requests.
+
+To interact with the started cluster by using etcdctl:
+
+```
+# use API version 3
+$ export ETCDCTL_API=3
+
+$ ./etcdctl put foo bar
+OK
+
+$ ./etcdctl get foo
+bar
+```
+
+## Local multi-member cluster
+
+A Procfile is provided to easily set up a local multi-member cluster. Start a multi-member cluster with a few commands:
+
+```
+# install goreman program to control Profile-based applications.
+$ go get github.com/mattn/goreman
+$ goreman -f Procfile start
+...
+```
+
+The started members listen on `localhost:12379`, `localhost:22379`, and `localhost:32379` for client requests respectively.
+
+To interact with the started cluster by using etcdctl:
+
+```
+# use API version 3
+$ export ETCDCTL_API=3
+
+$ etcdctl --write-out=table --endpoints=localhost:12379 member list
++------------------+---------+--------+------------------------+------------------------+
+|        ID        | STATUS  |  NAME  |       PEER ADDRS       |      CLIENT ADDRS      |
++------------------+---------+--------+------------------------+------------------------+
+| 8211f1d0f64f3269 | started | infra1 | http://127.0.0.1:12380 | http://127.0.0.1:12379 |
+| 91bc3c398fb3c146 | started | infra2 | http://127.0.0.1:22380 | http://127.0.0.1:22379 |
+| fd422379fda50e48 | started | infra3 | http://127.0.0.1:32380 | http://127.0.0.1:32379 |
++------------------+---------+--------+------------------------+------------------------+
+
+$ etcdctl --endpoints=localhost:12379 put foo bar
+OK
+```
+
+To exercise etcd's fault tolerance, kill a member:
+
+```
+# kill etcd2
+$ goreman run stop etcd2
+
+$ etcdctl --endpoints=localhost:12379 put key hello
+OK
+
+$ etcdctl --endpoints=localhost:12379 get key
+hello
+
+# try to get key from the killed member
+$ etcdctl --endpoints=localhost:22379 get key
+2016/04/18 23:07:35 grpc: Conn.resetTransport failed to create client transport: connection error: desc = "transport: dial tcp 127.0.0.1:22379: getsockopt: connection refused"; Reconnecting to "localhost:22379"
+Error:  grpc: timed out trying to connect
+
+# restart the killed member
+$ goreman run restart etcd2
+
+# get the key from restarted member
+$ etcdctl --endpoints=localhost:22379 get key
+hello
+```
+
+To learn more about interacting with etcd, read [interacting with etcd section][interacting].
+
+[interacting]: ./interacting_v3.md
+[clustering]: ../op-guide/clustering.md
+

Documentation/dev-internal/discovery_protocol.md

@@ -0,0 +1,113 @@
+# Discovery service protocol
+
+Discovery service protocol helps new etcd member to discover all other members in cluster bootstrap phase using a shared discovery URL.
+
+Discovery service protocol is _only_ used in cluster bootstrap phase, and cannot be used for runtime reconfiguration or cluster monitoring.
+
+The protocol uses a new discovery token to bootstrap one _unique_ etcd cluster. Remember that one discovery token can represent only one etcd cluster. As long as discovery protocol on this token starts, even if it fails halfway, it must not be used to bootstrap another etcd cluster.
+
+The rest of this article will walk through the discovery process with examples that correspond to a self-hosted discovery cluster. The public discovery service, discovery.etcd.io, functions the same way, but with a layer of polish to abstract away ugly URLs, generate UUIDs automatically, and provide some protections against excessive requests. At its core, the public discovery service still uses an etcd cluster as the data store as described in this document.
+
+## Protocol workflow
+
+The idea of discovery protocol is to use an internal etcd cluster to coordinate bootstrap of a new cluster. First, all new members interact with discovery service and help to generate the expected member list. Then each new member bootstraps its server using this list, which performs the same functionality as -initial-cluster flag.
+
+In the following example workflow, we will list each step of protocol in curl format for ease of understanding.
+
+By convention the etcd discovery protocol uses the key prefix `_etcd/registry`. If `http://example.com` hosts an etcd cluster for discovery service, a full URL to discovery keyspace will be `http://example.com/v2/keys/_etcd/registry`. We will use this as the URL prefix in the example.
+
+### Creating a new discovery token
+
+Generate a unique token that will identify the new cluster. This will be used as a unique prefix in discovery keyspace in the following steps. An easy way to do this is to use `uuidgen`:
+
+```
+UUID=$(uuidgen)
+```
+
+### Specifying the expected cluster size
+
+The discovery token expects a cluster size that must be specified. The size is used by the discovery service to know when it has found all members that will initially form the cluster.
+
+```
+curl -X PUT http://example.com/v2/keys/_etcd/registry/${UUID}/_config/size -d value=${cluster_size}
+```
+
+Usually the cluster size is 3, 5 or 7. Check [optimal cluster size][cluster-size] for more details.
+
+### Bringing up etcd processes
+
+Given the discovery URL, use it as `-discovery` flag and bring up etcd processes. Every etcd process will follow this next few steps internally if given a `-discovery` flag.
+
+### Registering itself
+
+The first thing for etcd process is to register itself into the discovery URL as a member. This is done by creating member ID as a key in the discovery URL.
+
+```
+curl -X PUT http://example.com/v2/keys/_etcd/registry/${UUID}/${member_id}?prevExist=false -d value="${member_name}=${member_peer_url_1}&${member_name}=${member_peer_url_2}"
+```
+
+### Checking the status
+
+It checks the expected cluster size and registration status in discovery URL, and decides what the next action is.
+
+```
+curl -X GET http://example.com/v2/keys/_etcd/registry/${UUID}/_config/size
+curl -X GET http://example.com/v2/keys/_etcd/registry/${UUID}
+```
+
+If registered members are still not enough, it will wait for left members to appear.
+
+If the number of registered members is bigger than the expected size N, it treats the first N registered members as the member list for the cluster. If the member itself is in the member list, the discovery procedure succeeds and it fetches all peers through the member list. If it is not in the member list, the discovery procedure finishes with the failure that the cluster has been full.
+
+In etcd implementation, the member may check the cluster status even before registering itself. So it could fail quickly if the cluster has been full.
+
+### Waiting for all members
+
+The wait process is described in detail in the [etcd API documentation][api].
+
+```
+curl -X GET http://example.com/v2/keys/_etcd/registry/${UUID}?wait=true&waitIndex=${current_etcd_index}
+```
+
+It keeps waiting until finding all members.
+
+## Public discovery service
+
+CoreOS Inc. hosts a public discovery service at https://discovery.etcd.io/ , which provides some nice features for ease of use.
+
+### Mask key prefix
+
+Public discovery service will redirect `https://discovery.etcd.io/${UUID}` to etcd cluster behind for the key at `/v2/keys/_etcd/registry`. It masks register key prefix for short and readable discovery url.
+
+### Get new token
+
+```
+GET /new
+
+Sent query:
+	size=${cluster_size}
+Possible status codes:
+	200 OK
+	400 Bad Request
+200 Body:
+	generated discovery url
+```
+
+The generation process in the service follows the steps from [Creating a New Discovery Token][new-discovery-token] to [Specifying the Expected Cluster Size][expected-cluster-size].
+
+### Check discovery status
+
+```
+GET /${UUID}
+```
+
+The status for this discovery token, including the machines that have been registered, can be checked by requesting the value of the UUID.
+
+### Open-source repository
+
+The repository is located at https://github.com/coreos/discovery.etcd.io. It could be used to build a custom discovery service.
+
+[api]: ../v2/api.md#waiting-for-a-change
+[cluster-size]: ../v2/admin_guide.md#optimal-cluster-size
+[expected-cluster-size]: #specifying-the-expected-cluster-size
+[new-discovery-token]: #creating-a-new-discovery-token

Documentation/dev-internal/logging.md

@@ -0,0 +1,29 @@
+# Logging conventions
+
+etcd uses the [capnslog][capnslog] library for logging application output categorized into *levels*. A log message's level is determined according to these conventions:
+
+* Error: Data has been lost, a request has failed for a bad reason, or a required resource has been lost
+  * Examples: 
+    * A failure to allocate disk space for WAL
+
+* Warning: (Hopefully) Temporary conditions that may cause errors, but may work fine. A replica disappearing (that may reconnect) is a warning.
+  * Examples:
+    * Failure to send raft message to a remote peer
+    * Failure to receive heartbeat message within the configured election timeout
+
+* Notice: Normal, but important (uncommon) log information.
+  * Examples:
+    * Add a new node into the cluster
+    * Add a new user into auth subsystem
+
+* Info: Normal, working log information, everything is fine, but helpful notices for auditing or common operations.
+  * Examples:
+    * Startup configuration
+    * Start to do snapshot
+
+* Debug: Everything is still fine, but even common operations may be logged, and less helpful but more quantity of notices.
+  * Examples:
+    * Send a normal message to a remote peer
+    * Write a log entry to disk
+
+[capnslog]: [https://github.com/coreos/pkg/tree/master/capnslog]

Documentation/dev-internal/release.md

@@ -0,0 +1,109 @@
+# etcd release guide
+
+The guide talks about how to release a new version of etcd.
+
+The procedure includes some manual steps for sanity checking but it can probably be further scripted. Please keep this document up-to-date if making changes to the release process. 
+
+## Prepare release
+
+Set desired version as environment variable for following steps. Here is an example to release 2.3.0:
+
+```
+export VERSION=v2.3.0
+export PREV_VERSION=v2.2.5
+```
+
+All releases version numbers follow the format of [semantic versioning 2.0.0](http://semver.org/).
+
+### Major, minor version release, or its pre-release
+
+- Ensure the relevant milestone on GitHub is complete. All referenced issues should be closed, or moved elsewhere.
+- Remove this release from [roadmap](https://github.com/coreos/etcd/blob/master/ROADMAP.md), if necessary.
+- Ensure the latest upgrade documentation is available.
+- Bump [hardcoded MinClusterVerion in the repository](https://github.com/coreos/etcd/blob/master/version/version.go#L29), if necessary.
+- Add feature capability maps for the new version, if necessary.
+
+### Patch version release
+
+- Discuss about commits that are backported to the patch release. The commits should not include merge commits.
+- Cherry-pick these commits starting from the oldest one into stable branch.
+
+## Write release note
+
+- Write introduction for the new release. For example, what major bug we fix, what new features we introduce or what performance improvement we make.
+- Write changelog for the last release. ChangeLog should be straightforward and easy to understand for the end-user.
+- Put `[GH XXXX]` at the head of change line to reference Pull Request that introduces the change. Moreover, add a link on it to jump to the Pull Request.
+
+## Tag version
+
+- Bump [hardcoded Version in the repository](https://github.com/coreos/etcd/blob/master/version/version.go#L30) to the latest version `${VERSION}`.
+- Ensure all tests on CI system are passed.
+- Manually check etcd is buildable in Linux, Darwin and Windows.
+- Manually check upgrade etcd cluster of previous minor version works well.
+- Manually check new features work well.
+- Add a signed tag through `git tag -s ${VERSION}`.
+- Sanity check tag correctness through `git show tags/$VERSION`.
+- Push the tag to GitHub through `git push origin tags/$VERSION`. This assumes `origin` corresponds to "https://github.com/coreos/etcd".
+
+## Build release binaries and images
+
+- Ensure `actool` is available, or installing it through `go get github.com/appc/spec/actool`.
+- Ensure `docker` is available.
+
+Run release script in root directory:
+
+```
+./scripts/release.sh ${VERSION}
+```
+
+It generates all release binaries and images under directory ./release.
+
+## Sign binaries and images
+
+etcd project key must be used to sign the generated binaries and images.`$SUBKEYID` is the key ID of etcd project Yubikey. Connect the key and run `gpg2 --card-status` to get the ID.
+
+The following commands are used for public release sign:
+
+```
+cd release
+for i in etcd-*{.zip,.tar.gz}; do gpg2 --default-key $SUBKEYID --armor --output ${i}.asc --detach-sign ${i}; done
+for i in etcd-*{.zip,.tar.gz}; do gpg2 --verify ${i}.asc ${i}; done
+```
+
+The public key for GPG signing can be found at [CoreOS Application Signing Key](https://coreos.com/security/app-signing-key)
+
+
+## Publish release page in GitHub
+
+- Set release title as the version name.
+- Follow the format of previous release pages.
+- Attach the generated binaries, aci image and signatures.
+- Select whether it is a pre-release.
+- Publish the release!
+
+## Publish docker image in Quay.io
+
+- Push docker image:
+
+```
+docker login quay.io
+docker push quay.io/coreos/etcd:${VERSION}
+```
+
+- Add `latest` tag to the new image on [quay.io](https://quay.io/repository/coreos/etcd?tag=latest&tab=tags) if this is a stable release.
+
+## Announce to the etcd-dev Googlegroup
+
+- Follow the format of [previous release emails](https://groups.google.com/forum/#!forum/etcd-dev).
+- Make sure to include a list of authors that contributed since the previous release - something like the following might be handy:
+
+```
+git log ...${PREV_VERSION} --pretty=format:"%an" | sort | uniq | tr '\n' ',' | sed -e 's#,#, #g' -e 's#, $##'
+```
+
+- Send email to etcd-dev@googlegroups.com
+
+## Post release
+
+- Create new stable branch through `git push origin ${VERSION_MAJOR}.${VERSION_MINOR}` if this is a major stable release. This assumes `origin` corresponds to "https://github.com/coreos/etcd".
+- Bump [hardcoded Version in the repository](https://github.com/coreos/etcd/blob/master/version/version.go#L30) to the version `${VERSION}+git`.

Documentation/dl_build.md

@@ -0,0 +1,56 @@
+# Download and build
+
+## System requirements
+
+The etcd performance benchmarks run etcd on 8 vCPU, 16GB RAM, 50GB SSD GCE instances, but any relatively modern machine with low latency storage and a few gigabytes of memory should suffice for most use cases. Applications with large v2 data stores will require more memory than a large v3 data store since data is kept in anonymous memory instead of memory mapped from a file. than For running etcd on a cloud provider, we suggest at least a medium instance on AWS or a standard-1 instance on GCE.
+
+## Download the pre-built binary
+
+The easiest way to get etcd is to use one of the pre-built release binaries which are available for OSX, Linux, Windows, appc, and Docker. Instructions for using these binaries are on the [GitHub releases page][github-release].
+
+## Build the latest version
+
+For those wanting to try the very latest version, build etcd from the `master` branch.
+[Go](https://golang.org/) version 1.6+ (with HTTP2 support) is required to build the latest version of etcd.
+
+Here are the commands to build an etcd binary from the `master` branch:
+
+```
+# go is required
+$ go version
+go version go1.6 darwin/amd64
+
+# GOPATH should be set correctly
+$ echo $GOPATH
+/Users/example/go
+
+$ mkdir -p $GOPATH/src/github.com/coreos
+$ cd $GOPATH/src/github.com/coreos
+$ git clone github.com:coreos/etcd.git
+$ cd etcd
+$ ./build
+$ ./bin/etcd
+...
+```
+
+## Test the installation
+
+Check the etcd binary is built correctly by starting etcd and setting a key.
+
+Start etcd:
+
+```
+$ ./bin/etcd
+```
+
+Set a key:
+
+```
+$ ETCDCTL_API=3 ./bin/etcdctl put foo bar
+OK
+```
+
+If OK is printed, then etcd is working!
+
+[github-release]: https://github.com/coreos/etcd/releases/
+[go]: https://golang.org/doc/install

Documentation/docs.md

@@ -0,0 +1,73 @@
+# Documentation
+
+etcd is a distributed key-value store designed to reliably and quickly preserve and provide access to critical data. It enables reliable distributed coordination through distributed locking, leader elections, and write barriers. An etcd cluster is intended for high availability and permanent data storage and retrieval.
+
+## Getting started
+
+New etcd users and developers should get started by [downloading and building][download_build] etcd. After getting etcd, follow this [quick demo][demo] to see the basics of creating and working with an etcd cluster.
+
+## Developing with etcd
+
+The easiest way to get started using etcd as a distributed key-value store is to [set up a local cluster][local_cluster].
+
+ - [Setting up local clusters][local_cluster]
+ - [Interacting with etcd][interacting]
+ - [API references][api_ref]
+ - [gRPC gateway][api_grpc_gateway]
+ - [Experimental features and APIs][experimental]
+
+## Operating etcd clusters
+
+Administrators who need to create reliable and scalable key-value stores for the developers they support should begin with a [cluster on multiple machines][clustering].
+
+ - [Setting up clusters][clustering]
+ - [Run etcd clusters inside containers][container]
+ - [Configuration][conf]
+ - [Security][security]
+ - Monitoring
+ - [Maintenance][maintenance]
+ - [Understand failures][failures]
+ - [Disaster recovery][recovery]
+ - [Performance][performance]
+ - [Versioning][versioning]
+ - [Supported platform][supported_platform]
+
+## Learning
+
+To learn more about the concepts and internals behind etcd, read the following pages:
+
+ - Why etcd (TODO)
+ - [Understand data model][data_model]
+ - [Understand APIs][understand_apis]
+ - [Glossary][glossary]
+ - Internals (TODO)
+
+## Upgrading and compatibility
+
+ - [Migrate applications from using API v2 to API v3][v2_migration]
+ - [Updating v2.3 to v3.0][v3_upgrade]
+
+## Troubleshooting
+
+[api_ref]: dev-guide/api_reference_v3.md
+[api_grpc_gateway]: dev-guide/api_grpc_gateway.md
+[clustering]: op-guide/clustering.md
+[conf]: op-guide/configuration.md
+[data_model]: learning/data_model.md
+[demo]: demo.md
+[download_build]: dl_build.md
+[failures]: op-guide/failures.md
+[glossary]: learning/glossary.md
+[interacting]: dev-guide/interacting_v3.md
+[local_cluster]: dev-guide/local_cluster.md
+[performance]: op-guide/performance.md
+[recovery]: op-guide/recovery.md
+[maintenance]: op-guide/maintenance.md
+[security]: op-guide/security.md
+[v2_migration]: op-guide/v2-migration.md
+[container]: op-guide/container.md
+[understand_apis]: learning/api.md
+[versioning]: op-guide/versioning.md
+[supported_platform]: op-guide/supported-platform.md
+[experimental]: dev-guide/experimental_apis.md
+[v3_upgrade]: upgrades/upgrade_3_0.md

Documentation/infra-guide/arm64-infra.md

@@ -1,68 +0,0 @@
-# etcd arm64 test infrastructure
-
-## Infrastructure summary
-
-All etcd project pipelines run via github actions. The etcd project currently maintains dedicated infrastructure for running `arm64` continuous integration testing. This is required because currently github actions runner virtual machines are only offered as `x64`.
-
-The infrastructure consists of two `c3.large.arm` bare metal servers kindly provided by [Equinix Metal](https://www.equinix.com/) via the [CNCF Community Infrastructure Lab].
-
-| Hostname                      | IP             | Operating System   | Region        |
-|-------------------------------|----------------|--------------------|---------------|
-| etcd-c3-large-arm64-runner-01 | 86.109.7.233   | Ubuntu 22.04.1 LTS | Washington DC |
-| etcd-c3-large-arm64-runner-02 | 147.28.151.226 | Ubuntu 22.04.1 LTS | Washington DC |
-
-## Infrastructure support
-
-The etcd project aims to self manage and resolve issues with project infrastructure internally where possible, however if situations emerge where we need to engage support from Equinix Metal we can open an issue under the [CNCF Community Infrastructure Lab] project or contact the [Equinix Metal support team](https://deploy.equinix.com/support). If the situation is urgent contact @vielmetti directly who can provide further assistance or escalation points.
-
-## Granting infrastructure access
-
-Etcd arm64 test infrastructure access is closely controlled to ensure the infrastructure is secure and protect the integrity of the etcd project.
-
-Access to the infrastructure is defined by the infra admins table below:
-
-| Name                      | Github         | K8s Slack          | Email              |
-|---------------------------|----------------|--------------------|--------------------|
-| Marek Siarkowicz          | @serathius     | @ Serathius        | Ref MAINTAINERS.md |
-| Benjamin Wang             | @ahrtr         | @ Benjamin Wang    | Ref MAINTAINERS.md |
-| Davanum Srinivas          | @dimns         | @ Dims             | davanum@gmail.com  |
-| Chao Chen                 | @chaochn47     | @ Chao Chen        | chaochn@amazon.com |
-| James Blair               | @jmhbnz        | @ James Blair      | etcd@jamma.life    |
-
-Individuals in this table are granted access to the infrastructure in two ways:
-
-### 1. Equinix metal web console access
-
-An etcd project exists under the CNCF organisation in the Equinix Metal web console. The direct url to the etcd console is <https://console.equinix.com/projects/1b8c1eb7-983c-4b40-97e0-e317406e232e>.
-
-When a new person is added to the infra admins table, an existing member or etcd maintainer should raise an issue in the [CNCF Community Infrastructure Labs](https://github.com/cncf/cluster/issues) to ensure they are granted web console access.
-
-### 2. Server ssh access
-
-Infra admins can ssh directly to the servers with a dedicated user account for each person, usernames are based on github handles for easy recognition in logs. These infra admins will be able to elevate to the `root` user when necessary via `sudo`.
-
-Access to machines via ssh is strictly via individual ssh key based authentication, and is not permitted directly to the `root` user. Password authentication is never to be used for etcd infrastructure ssh authentication.
-
-When a new member is added to the infra admins table, and existing member with ssh access should complete the following actions on all etcd servers:
-
-- create the new user via `sudo adduser <username>`.
-- add their public key to `/home/<username>/.ssh/authorized_keys` file. Note: Public keys are to be retrieved via github only, example: <https://github.com/jmhbnz.keys>.
-- add the new user to machine sudoers file via `usermod -aG sudo <username>`.
-
-## Revoking infrastructure access
-
-When a member is removed from the infra admins table existing members must review servers and ensure their user access to etcd infrastructure is revoked by removing the members `/home/<username>/.ssh/authorized_keys` entries.
-
-Note: When revoking access do not delete a user or their home directory from servers, as access may need to be reinstated in future.
-
-### Regular access review
-
-On a regular at least quarterly basis members of the infra admins team are responsible for verifying that no unneccessary infrastructure access exists by reviewing membership of the table above and existing server access.
-
-## Provisioning new machines
-
-If the etcd project needs new `arm64` infrastructure we can open an issue with the [CNCF Community Infrastructure Lab]. An example etcd request is [here](https://github.com/cncf/cluster/issues/227).
-
-Note: `arm64` compute capacity is not currently available in all regions, this can be checked with [metal-cli](https://github.com/equinix/metal-cli) `metal capacity get | grep arm`.
-
-[CNCF Community Infrastructure Lab]: https://github.com/cncf/cluster/issues

Documentation/learning/api.md

@@ -0,0 +1,57 @@
+# etcd3 API
+
+NOTE: this doc is not finished!
+
+## Response header
+
+All Responses from etcd API have a [response header][response_header] attached. The response header includes the metadata of the response.
+
+```proto
+message ResponseHeader {
+  uint64 cluster_id = 1;
+  uint64 member_id = 2;
+  int64 revision = 3;
+  uint64 raft_term = 4;
+}
+```
+
+* Cluster_ID - the ID of the cluster that generates the response
+* Member_ID - the ID of the member that generates the response
+* Revision - the revision of the key-value store when the response is generated
+* Raft_Term - the Raft term of the member when the response is generated
+
+An application may read the Cluster_ID (Member_ID) field to ensure it is communicating with the intended cluster (member).
+
+Applications can use the `Revision` to know the latest revision of the key-value store. This is especially useful when applications specify a historical revision to make time `travel query` and wishes to know the latest revision at the time of the request.
+
+Applications can use `Raft_Term` to detect when the cluster completes a new leader election.
+
+## Key-Value API
+
+Key-Value API is used to manipulate key-value pairs stored inside etcd. The key-value API is defined as a [gRPC service][kv-service]. The Key-Value pair is defined as structured data in [protobuf format][kv-proto].
+
+### Key-Value pair
+
+A key-value pair is the smallest unit that the key-value API can manipulate. Each key-value pair has a number of fields:
+
+```protobuf
+message KeyValue {
+  bytes key = 1;
+  int64 create_revision = 2;
+  int64 mod_revision = 3;
+  int64 version = 4;
+  bytes value = 5;
+  int64 lease = 6;
+}
+```
+
+* Key - key in bytes. An empty key is not allowed.
+* Value - value in bytes.
+* Version - version is the version of the key. A deletion resets the version to zero and any modification of the key increases its version.
+* Create_Revision - revision of the last creation on the key.
+* Mod_Revision - revision of the last modification on the key.
+* Lease - the ID of the lease attached to the key. If lease is 0, then no lease is attached to the key.
+
+[kv-proto]: https://github.com/coreos/etcd/blob/master/mvcc/mvccpb/kv.proto
+[kv-service]: https://github.com/coreos/etcd/blob/master/etcdserver/etcdserverpb/rpc.proto
+[response_header]: https://github.com/coreos/etcd/blob/master/etcdserver/etcdserverpb/rpc.proto

Documentation/learning/api_guarantees.md

@@ -0,0 +1,63 @@
+# KV API guarantees
+
+etcd is a consistent and durable key value store with mini-transaction(TODO: link to txn doc when we have it) support. The key value store is exposed through the KV APIs. etcd tries to ensure the strongest consistency and durability guarantees for a distributed system. This specification enumerates the KV API guarantees made by etcd.
+
+### APIs to consider
+
+* Read APIs
+    * range
+    * watch
+* Write APIs
+    * put
+    * delete
+* Combination (read-modify-write) APIs
+    * txn
+
+### etcd specific definitions
+
+#### Operation completed
+
+An etcd operation is considered complete when it is committed through consensus, and therefore “executed” -- permanently stored -- by the etcd storage engine. The client knows an operation is completed when it receives a response from the etcd server. Note that the client may be uncertain about the status of an operation if it times out, or there is a network disruption between the client and the etcd member. etcd may also abort operations when there is a leader election. etcd does not send `abort` responses to  clients’ outstanding requests in this event.
+
+#### Revision
+
+An etcd operation that modifies the key value store is assigned with a single increasing revision. A transaction operation might modifies the key value store multiple times, but only one revision is assigned. The revision attribute of a key value pair that modified by the operation has the same value as the revision of the operation. The revision can be used as a logical clock for key value store. A key value pair that has a larger revision is modified after a key value pair with a smaller revision. Two key value pairs that have the same revision are modified by an operation "concurrently".
+
+### Guarantees provided
+
+#### Atomicity
+
+All API requests are atomic; an operation either completes entirely or not at all. For watch requests, all events generated by one operation will be in one watch response. Watch never observes partial events for a single operation.
+
+#### Consistency
+
+All API calls ensure [sequential consistency][seq_consistency], the strongest consistency guarantee available from distributed systems. No matter which etcd member server a client makes requests to, a client reads the same events in the same order. If two members complete the same number of operations, the state of the two members is consistent.
+
+For watch operations, etcd guarantees to return the same value for the same key across all members for the same revision. For range operations, etcd has a similar guarantee for [linearized][Linearizability] access; serialized access may be behind the quorum state, so that the later revision is not yet available.
+
+As with all distributed systems, it is impossible for etcd to ensure [strict consistency][strict_consistency]. etcd does not guarantee that it will return to a read the “most recent” value (as measured by a wall clock when a request is completed) available on any cluster member.
+
+#### Isolation
+
+etcd ensures [serializable isolation][serializable_isolation], which is the highest isolation level available in distributed systems. Read operations will never observe any intermediate data.
+
+#### Durability
+
+Any completed operations are durable. All accessible data is also durable data. A read will never return data that has not been made durable.
+
+#### Linearizability
+
+Linearizability (also known as Atomic Consistency or External Consistency) is a consistency level between strict consistency and sequential consistency. 
+
+For linearizability, suppose each operation receives a timestamp from a loosely synchronized global clock. Operations are linearized if and only if they always complete as though they were executed in a sequential order and each operation appears to complete in the order specified by the program. Likewise, if an operation’s timestamp precedes another, that operation must also precede the other operation in the sequence.
+
+For example, consider a client completing a write at time point 1 (*t1*). A client issuing a read at *t2* (for *t2* > *t1*) should receive a value at least as recent as the previous write, completed at *t1*. However, the read might actually complete only by *t3*, and the returned value, current at *t2* when the read began, might be "stale" by *t3*.
+
+etcd does not ensure linearizability for watch operations. Users are expected to verify the revision of watch responses to ensure correct ordering.
+
+etcd ensures linearizability for all other operations by default. Linearizability comes with a cost, however, because linearized requests must go through the Raft consensus process. To obtain lower latencies and higher throughput for read requests, clients can configure a request’s consistency mode to `serializable`, which may access stale data with respect to quorum, but removes the performance penalty of linearized accesses' reliance on live consensus.
+
+[seq_consistency]: https://en.wikipedia.org/wiki/Consistency_model#Sequential_consistency
+[strict_consistency]: https://en.wikipedia.org/wiki/Consistency_model#Strict_consistency
+[serializable_isolation]: https://en.wikipedia.org/wiki/Isolation_(database_systems)#Serializable
+[Linearizability]: #Linearizability

Documentation/learning/data_model.md

@@ -0,0 +1,25 @@
+# Data model
+
+etcd is designed to reliably store infrequently updated data and provide reliable watch queries. etcd exposes previous versions of key-value pairs to support inexpensive snapshots and watch history events (“time travel queries”). A persistent, multi-version, concurrency-control data model is a good fit for these use cases.
+
+etcd stores data in a multiversion [persistent][persistent-ds] key-value store. The persistent key-value store preserves the previous version of a key-value pair when its value is superseded with new data. The key-value store is effectively immutable; its operations do not update the structure in-place, but instead always generates a new updated structure. All past versions of keys are still accessible and watchable after modification. To prevent the data store from growing indefinitely over time from maintaining old versions, the store may be compacted to shed the oldest versions of superseded data.
+
+### Logical view
+
+The store’s logical view is a flat binary key space. The key space has a lexically sorted index on byte string keys so range queries are inexpensive.
+
+The key space maintains multiple revisions. Each atomic mutative operation (e.g., a transaction operation may contain multiple operations) creates a new revision on the key space. All data held by previous revisions remains unchanged. Old versions of key can still be accessed through previous revisions. Likewise, revisions are indexed as well; ranging over revisions with watchers is efficient. If the store is compacted to recover space, revisions before the compact revision will be removed.
+
+A key’s lifetime spans a generation. Each key may have one or multiple generations. Creating a key increments the generation of that key, starting at 1 if the key never existed. Deleting a key generates a key tombstone, concluding the key’s current generation. Each modification of a key creates a new version of the key. Once a compaction happens, any generation ended before the given revision will be removed and values set before the compaction revision except the latest one will be removed.
+
+### Physical view
+
+etcd stores the physical data as key-value pairs in a persistent [b+tree][b+tree]. Each revision of the store’s state only contains the delta from its previous revision to be efficient. A single revision may correspond to multiple keys in the tree. 
+
+The key of key-value pair is a 3-tuple (major, sub, type). Major is the store revision holding the key. Sub differentiates among  keys within the same revision. Type is an optional suffix for special value (e.g., `t` if the value contains a tombstone). The value of the key-value pair contains the modification from previous revision, thus one delta from previous revision. The b+tree is ordered by key in lexical byte-order. Ranged lookups over revision deltas are fast; this enables quickly finding modifications from one specific revision to another. Compaction removes out-of-date keys-value pairs.
+
+etcd also keeps a secondary in-memory [btree][btree] index to speed up range queries over keys. The keys in the btree index are the keys of the store exposed to user. The value is a pointer to the modification of the persistent b+tree. Compaction removes dead pointers.
+
+[persistent-ds]: https://en.wikipedia.org/wiki/Persistent_data_structure
+[btree]: https://en.wikipedia.org/wiki/B-tree
+[b+tree]: https://en.wikipedia.org/wiki/B%2B_tree

Documentation/learning/glossary.md

@@ -0,0 +1,35 @@
+# Glossary
+
+This document defines the various terms used in etcd documentation, command line and source code.
+
+## Node
+
+Node is an instance of raft state machine.
+
+It has a unique identification, and records other nodes' progress internally when it is the leader.
+
+## Member
+
+Member is an instance of etcd. It hosts a node, and provides service to clients.
+
+## Cluster
+
+Cluster consists of several members.
+
+The node in each member follows raft consensus protocol to replicate logs. Cluster receives proposals from members, commits them and apply to local store.
+
+## Peer
+
+Peer is another member of the same cluster.
+
+## Proposal
+
+A proposal is a request (for example a write request, a configuration change request) that needs to go through raft protocol.
+
+## Client
+
+Client is a caller of the cluster's HTTP API.
+
+## Machine (deprecated)
+
+The alternative of Member in etcd before 2.0

Documentation/libraries-and-tools.md

@@ -0,0 +1,135 @@
+# Libraries and tools
+
+**Tools**
+
+- [etcdctl](https://github.com/coreos/etcd/tree/master/etcdctl) - A command line client for etcd
+- [etcd-backup](https://github.com/fanhattan/etcd-backup) - A powerful command line utility for dumping/restoring etcd - Supports v2
+- [etcd-dump](https://npmjs.org/package/etcd-dump) - Command line utility for dumping/restoring etcd.
+- [etcd-fs](https://github.com/xetorthio/etcd-fs) - FUSE filesystem for etcd
+- [etcddir](https://github.com/rekby/etcddir) - Realtime sync etcd and local directory. Work with windows and linux.
+- [etcd-browser](https://github.com/henszey/etcd-browser) - A web-based key/value editor for etcd using AngularJS
+- [etcd-lock](https://github.com/datawisesystems/etcd-lock) - Master election & distributed r/w lock implementation using etcd - Supports v2
+- [etcd-console](https://github.com/matishsiao/etcd-console) - A web-base key/value editor for etcd using PHP
+- [etcd-viewer](https://github.com/nikfoundas/etcd-viewer) - An etcd key-value store editor/viewer written in Java
+- [etcdtool](https://github.com/mickep76/etcdtool) - Export/Import/Edit etcd directory as JSON/YAML/TOML and Validate directory using JSON schema
+- [etcd-rest](https://github.com/mickep76/etcd-rest) - Create generic REST API in Go using etcd as a backend with validation using JSON schema
+- [etcdsh](https://github.com/kamilhark/etcdsh) - A command line client with support of command history and tab completion. Supports v2
+
+**Go libraries**
+
+- [etcd/clientv3](https://github.com/coreos/etcd/blob/master/clientv3) - the officially maintained Go client for v3
+- [etcd/client](https://github.com/coreos/etcd/blob/master/client) - the officially maintained Go client for v2
+- [go-etcd](https://github.com/coreos/go-etcd) - the deprecated official client. May be useful for older (<2.0.0) versions of etcd.
+
+**Java libraries**
+
+- [boonproject/etcd](https://github.com/boonproject/boon/blob/master/etcd/README.md) - Supports v2, Async/Sync and waits
+- [justinsb/jetcd](https://github.com/justinsb/jetcd)
+- [diwakergupta/jetcd](https://github.com/diwakergupta/jetcd) - Supports v2
+- [jurmous/etcd4j](https://github.com/jurmous/etcd4j) - Supports v2, Async/Sync, waits and SSL
+- [AdoHe/etcd4j](http://github.com/AdoHe/etcd4j) - Supports v2 (enhance for real production cluster)
+- [cdancy/etcd-rest](https://github.com/cdancy/etcd-rest) - Uses jclouds to provide a complete implementation of v2 API.
+
+**Scala libraries**
+
+- [maciej/etcd-client](https://github.com/maciej/etcd-client) - Supports v2. Akka HTTP-based fully async client
+
+**Python libraries**
+
+- [jplana/python-etcd](https://github.com/jplana/python-etcd) - Supports v2
+- [russellhaering/txetcd](https://github.com/russellhaering/txetcd) - a Twisted Python library
+- [cholcombe973/autodock](https://github.com/cholcombe973/autodock) - A docker deployment automation tool
+- [lisael/aioetcd](https://github.com/lisael/aioetcd) - (Python 3.4+) Asyncio coroutines client (Supports v2)
+
+**Node libraries**
+
+- [stianeikeland/node-etcd](https://github.com/stianeikeland/node-etcd) - Supports v2 (w Coffeescript)
+- [lavagetto/nodejs-etcd](https://github.com/lavagetto/nodejs-etcd) - Supports v2
+- [deedubs/node-etcd-config](https://github.com/deedubs/node-etcd-config) - Supports v2
+
+**Ruby libraries**
+
+- [iconara/etcd-rb](https://github.com/iconara/etcd-rb)
+- [jpfuentes2/etcd-ruby](https://github.com/jpfuentes2/etcd-ruby)
+- [ranjib/etcd-ruby](https://github.com/ranjib/etcd-ruby) - Supports v2
+
+**C libraries**
+
+- [jdarcy/etcd-api](https://github.com/jdarcy/etcd-api) - Supports v2
+- [shafreeck/cetcd](https://github.com/shafreeck/cetcd) - Supports v2
+
+**C++ libraries**
+- [edwardcapriolo/etcdcpp](https://github.com/edwardcapriolo/etcdcpp) - Supports v2
+- [suryanathan/etcdcpp](https://github.com/suryanathan/etcdcpp) - Supports v2 (with waits)
+
+**Clojure libraries**
+
+- [aterreno/etcd-clojure](https://github.com/aterreno/etcd-clojure)
+- [dwwoelfel/cetcd](https://github.com/dwwoelfel/cetcd) - Supports v2
+- [rthomas/clj-etcd](https://github.com/rthomas/clj-etcd) - Supports v2
+
+**Erlang libraries**
+
+- [marshall-lee/etcd.erl](https://github.com/marshall-lee/etcd.erl)
+
+**.Net Libraries**
+
+- [wangjia184/etcdnet](https://github.com/wangjia184/etcdnet) - Supports v2
+- [drusellers/etcetera](https://github.com/drusellers/etcetera)
+
+**PHP Libraries**
+
+- [linkorb/etcd-php](https://github.com/linkorb/etcd-php)
+
+**Haskell libraries**
+
+- [wereHamster/etcd-hs](https://github.com/wereHamster/etcd-hs)
+
+**R libraries**
+
+- [ropensci/etseed](https://github.com/ropensci/etseed)
+
+**Tcl libraries**
+
+- [efrecon/etcd-tcl](https://github.com/efrecon/etcd-tcl) - Supports v2, except wait.
+
+**Gradle Plugins**
+
+- [gradle-etcd-rest-plugin](https://github.com/cdancy/gradle-etcd-rest-plugin) - Supports v2
+
+**Chef Integration**
+
+- [coderanger/etcd-chef](https://github.com/coderanger/etcd-chef)
+
+**Chef Cookbook**
+
+- [spheromak/etcd-cookbook](https://github.com/spheromak/etcd-cookbook)
+
+**BOSH Releases**
+
+- [cloudfoundry-community/etcd-boshrelease](https://github.com/cloudfoundry-community/etcd-boshrelease)
+- [cloudfoundry/cf-release](https://github.com/cloudfoundry/cf-release/tree/master/jobs/etcd)
+
+**Projects using etcd**
+
+- [binocarlos/yoda](https://github.com/binocarlos/yoda) - etcd + ZeroMQ
+- [calavera/active-proxy](https://github.com/calavera/active-proxy) - HTTP Proxy configured with etcd
+- [derekchiang/etcdplus](https://github.com/derekchiang/etcdplus) - A set of distributed synchronization primitives built upon etcd
+- [go-discover](https://github.com/flynn/go-discover) - service discovery in Go
+- [gleicon/goreman](https://github.com/gleicon/goreman/tree/etcd) - Branch of the Go Foreman clone with etcd support
+- [garethr/hiera-etcd](https://github.com/garethr/hiera-etcd) - Puppet hiera backend using etcd
+- [mattn/etcd-vim](https://github.com/mattn/etcd-vim) - SET and GET keys from inside vim
+- [mattn/etcdenv](https://github.com/mattn/etcdenv) - "env" shebang with etcd integration
+- [kelseyhightower/confd](https://github.com/kelseyhightower/confd) - Manage local app config files using templates and data from etcd
+- [configdb](https://git.autistici.org/ai/configdb/tree/master) - A REST relational abstraction on top of arbitrary database backends, aimed at storing configs and inventories.
+- [scrz](https://github.com/scrz/scrz) - Container manager, stores configuration in etcd.
+- [fleet](https://github.com/coreos/fleet) - Distributed init system
+- [kubernetes/kubernetes](https://github.com/kubernetes/kubernetes) - Container cluster manager introduced by Google.
+- [mailgun/vulcand](https://github.com/mailgun/vulcand) - HTTP proxy that uses etcd as a configuration backend.
+- [duedil-ltd/discodns](https://github.com/duedil-ltd/discodns) - Simple DNS nameserver using etcd as a database for names and records.
+- [skynetservices/skydns](https://github.com/skynetservices/skydns) - RFC compliant DNS server
+- [xordataexchange/crypt](https://github.com/xordataexchange/crypt) - Securely store values in etcd using GPG encryption
+- [spf13/viper](https://github.com/spf13/viper) - Go configuration library, reads values from ENV, pflags, files, and etcd with optional encryption
+- [lytics/metafora](https://github.com/lytics/metafora) - Go distributed task library
+- [ryandoyle/nss-etcd](https://github.com/ryandoyle/nss-etcd) - A GNU libc NSS module for resolving names from etcd.
+- [Gru](https://github.com/dnaeon/gru) - Orchestration made easy with Go

Documentation/metrics.md

@@ -0,0 +1,136 @@
+# Metrics
+
+etcd uses [Prometheus][prometheus] for metrics reporting. The metrics can be used for real-time monitoring and debugging. etcd does not persist its metrics; if a member restarts, the metrics will be reset.
+
+The simplest way to see the available metrics is to cURL the metrics endpoint `/metrics`. The format is described [here](http://prometheus.io/docs/instrumenting/exposition_formats/).
+
+Follow the [Prometheus getting started doc][prometheus-getting-started] to spin up a Prometheus server to collect etcd metrics.
+
+The naming of metrics follows the suggested [Prometheus best practices][prometheus-naming]. A metric name has an `etcd` or `etcd_debugging` prefix as its namespace and a subsystem prefix (for example `wal` and `etcdserver`).
+
+## etcd namespace metrics
+
+The metrics under the `etcd` prefix are for monitoring and alerting. They are stable high level metrics. If there is any change of these metrics, it will be included in release notes.
+
+Metrics that are etcd2 related are documented [v2 metrics guide][v2-http-metrics].
+
+### Server
+
+These metrics describe the status of the etcd server. In order to detect outages or problems for troubleshooting, the server metrics of every production etcd cluster should be closely monitored.
+
+All these metrics are prefixed with `etcd_server_`
+
+| Name                      | Description                                              | Type    |
+|---------------------------|----------------------------------------------------------|---------|
+| has_leader                | Whether or not a leader exists. 1 is existence, 0 is not.| Gauge   |
+| leader_changes_seen_total | The number of leader changes seen.                       | Counter |
+| proposals_committed_total | The total number of consensus proposals committed.       | Gauge   |
+| proposals_applied_total   | The total number of consensus proposals applied.         | Gauge   |
+| proposals_pending         | The current number of pending proposals.                 | Gauge   |
+| proposals_failed_total    | The total number of failed proposals seen.               | Counter |
+
+`has_leader` indicates whether the member has a leader. If a member does not have a leader, it is
+totally unavailable. If all the members in the cluster do not have any leader, the entire cluster
+is totally unavailable.
+
+`leader_changes_seen_total` counts the number of leader changes the member has seen since its start. Rapid leadership changes impact the performance of etcd significantly. It also signals that the leader is unstable, perhaps due to network connectivity issues or excessive load hitting the etcd cluster.
+
+`proposals_committed_total` records the total number of consensus proposals committed. This gauge should increase over time if the cluster is healthy. Several healthy members of an etcd cluster may have different total committed proposals at once. This discrepancy may be due to recovering from peers after starting, lagging behind the leader, or being the leader and therefore having the most commits. It is important to monitor this metric across all the members in the cluster; a consistently large lag between a single member and its leader indicates that member is slow or unhealthy.
+
+`proposals_applied_total` records the total number of consensus proposals applied. The etcd server applies every committed proposal asynchronously. The difference between `proposals_committed_total` and `proposals_applied_total` should usually be small (within a few thousands even under high load). If the difference between them continues to rise, it indicates that the etcd server is overloaded. This might happen when applying expensive queries like heavy range queries or large txn operations.
+
+`proposals_pending` indicates how many proposals are queued to commit. Rising pending proposals suggests there is a high client load or the member cannot commit proposals.
+
+`proposals_failed_total` are normally related to two issues: temporary failures related to a leader election or longer downtime caused by a loss of quorum in the cluster.
+
+### Disk
+
+These metrics describe the status of the disk operations.
+
+All these metrics are prefixed with `etcd_disk_`.
+
+| Name                               | Description                                           | Type      |
+|------------------------------------|-------------------------------------------------------|-----------|
+| wal_fsync_duration_seconds         | The latency distributions of fsync called by wal      | Histogram |
+| backend_commit_duration_seconds    | The latency distributions of commit called by backend.| Histogram |
+
+A `wal_fsync` is called when etcd persists its log entries to disk before applying them.
+
+A `backend_commit` is called when etcd commits an incremental snapshot of its most recent changes to disk.
+
+High disk operation latencies (`wal_fsync_duration_seconds` or `backend_commit_duration_seconds`) often indicate disk issues. It may cause high request latency or make the cluster unstable.
+
+### Network
+
+These metrics describe the status of the network.
+
+All these metrics are prefixed with `etcd_network_`
+
+| Name                      | Description                                                        | Type          |
+|---------------------------|--------------------------------------------------------------------|---------------|
+| peer_sent_bytes_total           | The total number of bytes sent to the peer with ID `To`.         | Counter(To)   |
+| peer_received_bytes_total       | The total number of bytes received from the peer with ID `From`. | Counter(From) |
+| peer_round_trip_time_seconds    | Round-Trip-Time histogram between peers.                         | Histogram(To) |
+| client_grpc_sent_bytes_total    | The total number of bytes sent to grpc clients.                  | Counter   |
+| client_grpc_received_bytes_total| The total number of bytes received to grpc clients.              | Counter   |
+
+`peer_sent_bytes_total` counts the total number of bytes sent to a specific peer. Usually the leader member sends more data than other members since it is responsible for transmitting replicated data.
+
+`peer_received_bytes_total` counts the total number of bytes received from a specific peer. Usually follower members receive data only from the leader member.
+
+### gRPC requests
+
+These metrics describe the requests served by a specific etcd member: total received requests, total failed requests, and processing latency. They are useful for tracking user-generated traffic hitting the etcd cluster.
+
+All these metrics are prefixed with `etcd_grpc_`
+
+| Name                           | Description                                                                         | Type                   |
+|--------------------------------|-------------------------------------------------------------------------------------|------------------------|
+| requests_total                 | Total number of received requests                                                   | Counter(method)        |
+| requests_failed_total                   | Total number of failed requests.                                                    | Counter(method,error)  |
+| unary_requests_duration_seconds     | Bucketed handling duration of the requests.                                         | Histogram(method)      |
+
+
+Example Prometheus queries that may be useful from these metrics (across all etcd members):
+ 
+ * `sum(rate(etcd_grpc_requests_failed_total{job="etcd"}[1m]) by (grpc_method) / sum(rate(etcd_grpc_total{job="etcd"})[1m]) by (grpc_method)` 
+    
+    Shows the fraction of events that failed by gRPC method across all members, across a time window of `1m`.
+ 
+ * `sum(rate(etcd_grpc_requests_total{job="etcd",grpc_method="PUT"})[1m]) by (grpc_method)`
+    
+    Shows the rate of PUT requests across all members, across a time window of `1m`.
+    
+ * `histogram_quantile(0.9, sum(rate(etcd_grpc_unary_requests_duration_seconds{job="etcd",grpc_method="PUT"}[5m]) ) by (le))`
+    
+    Show the 0.90-tile latency (in seconds) of PUT request handling across all members, with a window of `5m`. 
+
+## etcd_debugging namespace metrics
+
+The metrics under the `etcd_debugging` prefix are for debugging. They are very implementation dependent and volatile. They might be changed or removed without any warning in new etcd releases. Some of the metrics might be moved to the `etcd` prefix when they become more stable.
+
+
+### Snapshot
+
+| Name                                       | Description                                                | Type      |
+|--------------------------------------------|------------------------------------------------------------|-----------|
+| snapshot_save_total_duration_seconds      | The total latency distributions of save called by snapshot | Histogram |
+
+Abnormally high snapshot duration (`snapshot_save_total_duration_seconds`) indicates disk issues and might cause the cluster to be unstable.
+
+## Prometheus supplied metrics
+
+The Prometheus client library provides a number of metrics under the `go` and `process` namespaces. There are a few that are particlarly interesting.
+
+| Name                              | Description                                | Type         |
+|-----------------------------------|--------------------------------------------|--------------|
+| process_open_fds                  | Number of open file descriptors.           | Gauge        |
+| process_max_fds                   | Maximum number of open file descriptors.   | Gauge        |
+
+Heavy file descriptor (`process_open_fds`) usage (i.e., near the process's file descriptor limit, `process_max_fds`) indicates a potential file descriptor exhaustion issue. If the file descriptors are exhausted, etcd may panic because it cannot create new WAL files.
+
+[glossary-proposal]: learning/glossary.md#proposal
+[prometheus]: http://prometheus.io/
+[prometheus-getting-started]: http://prometheus.io/docs/introduction/getting_started/
+[prometheus-naming]: http://prometheus.io/docs/practices/naming/
+[v2-http-metrics]: v2/metrics.md#http-requests

Documentation/op-guide/clustering.md

@@ -0,0 +1,474 @@
+# Clustering Guide
+
+## Overview
+
+Starting an etcd cluster statically requires that each member knows another in the cluster. In a number of cases, the IPs of the cluster members may be unknown ahead of time. In these cases, the etcd cluster can be bootstrapped with the help of a discovery service.
+
+Once an etcd cluster is up and running, adding or removing members is done via [runtime reconfiguration][runtime-conf]. To better understand the design behind runtime reconfiguration, we suggest reading [the runtime configuration design document][runtime-reconf-design].
+
+This guide will cover the following mechanisms for bootstrapping an etcd cluster:
+
+* [Static](#static)
+* [etcd Discovery](#etcd-discovery)
+* [DNS Discovery](#dns-discovery)
+
+Each of the bootstrapping mechanisms will be used to create a three machine etcd cluster with the following details:
+
+|Name|Address|Hostname|
+|------|---------|------------------|
+|infra0|10.0.1.10|infra0.example.com|
+|infra1|10.0.1.11|infra1.example.com|
+|infra2|10.0.1.12|infra2.example.com|
+
+## Static
+
+As we know the cluster members, their addresses and the size of the cluster before starting, we can use an offline bootstrap configuration by setting the `initial-cluster` flag. Each machine will get either the following environment variables or command line:
+
+```
+ETCD_INITIAL_CLUSTER="infra0=http://10.0.1.10:2380,infra1=http://10.0.1.11:2380,infra2=http://10.0.1.12:2380"
+ETCD_INITIAL_CLUSTER_STATE=new
+```
+
+```
+--initial-cluster infra0=http://10.0.1.10:2380,infra1=http://10.0.1.11:2380,infra2=http://10.0.1.12:2380 \
+--initial-cluster-state new
+```
+
+Note that the URLs specified in `initial-cluster` are the _advertised peer URLs_, i.e. they should match the value of `initial-advertise-peer-urls` on the respective nodes.
+
+If spinning up multiple clusters (or creating and destroying a single cluster) with same configuration for testing purpose, it is highly recommended that each cluster is given a unique `initial-cluster-token`. By doing this, etcd can generate unique cluster IDs and member IDs for the clusters even if they otherwise have the exact same configuration. This can protect etcd from cross-cluster-interaction, which might corrupt the clusters.
+
+etcd listens on [`listen-client-urls`][conf-listen-client] to accept client traffic. etcd member advertises the URLs specified in [`advertise-client-urls`][conf-adv-client] to other members, proxies, clients. Please make sure the `advertise-client-urls` are reachable from intended clients. A common mistake is setting `advertise-client-urls` to localhost or leave it as default if the remote clients should reach etcd.
+
+On each machine, start etcd with these flags:
+
+```
+$ etcd --name infra0 --initial-advertise-peer-urls http://10.0.1.10:2380 \
+  --listen-peer-urls http://10.0.1.10:2380 \
+  --listen-client-urls http://10.0.1.10:2379,http://127.0.0.1:2379 \
+  --advertise-client-urls http://10.0.1.10:2379 \
+  --initial-cluster-token etcd-cluster-1 \
+  --initial-cluster infra0=http://10.0.1.10:2380,infra1=http://10.0.1.11:2380,infra2=http://10.0.1.12:2380 \
+  --initial-cluster-state new
+```
+```
+$ etcd --name infra1 --initial-advertise-peer-urls http://10.0.1.11:2380 \
+  --listen-peer-urls http://10.0.1.11:2380 \
+  --listen-client-urls http://10.0.1.11:2379,http://127.0.0.1:2379 \
+  --advertise-client-urls http://10.0.1.11:2379 \
+  --initial-cluster-token etcd-cluster-1 \
+  --initial-cluster infra0=http://10.0.1.10:2380,infra1=http://10.0.1.11:2380,infra2=http://10.0.1.12:2380 \
+  --initial-cluster-state new
+```
+```
+$ etcd --name infra2 --initial-advertise-peer-urls http://10.0.1.12:2380 \
+  --listen-peer-urls http://10.0.1.12:2380 \
+  --listen-client-urls http://10.0.1.12:2379,http://127.0.0.1:2379 \
+  --advertise-client-urls http://10.0.1.12:2379 \
+  --initial-cluster-token etcd-cluster-1 \
+  --initial-cluster infra0=http://10.0.1.10:2380,infra1=http://10.0.1.11:2380,infra2=http://10.0.1.12:2380 \
+  --initial-cluster-state new
+```
+
+The command line parameters starting with `--initial-cluster` will be ignored on subsequent runs of etcd. Feel free to remove the environment variables or command line flags after the initial bootstrap process. If the configuration needs changes later (for example, adding or removing members to/from the cluster), see the [runtime configuration][runtime-conf] guide.
+
+### TLS
+
+etcd supports encrypted communication through the TLS protocol. TLS channels can be used for encrypted internal cluster communication between peers as well as encrypted client traffic. This section provides examples for setting up a cluster with peer and client TLS. Additional information detailing etcd's TLS support can be found in the [security guide][security-guide].
+
+#### Self-signed certificates
+
+A cluster using self-signed certificates both encrypts traffic and authenticates its connections. To start a cluster with self-signed certificates, each cluster member should have a unique key pair (`member.crt`, `member.key`) signed by a shared cluster CA certificate (`ca.crt`) for both peer connections and client connections. Certificates may be generated by following the etcd [TLS setup][tls-setup] example.
+
+On each machine, etcd would be started with these flags:
+
+```
+$ etcd --name infra0 --initial-advertise-peer-urls http://10.0.1.10:2380 \
+  --listen-peer-urls https://10.0.1.10:2380 \
+  --listen-client-urls https://10.0.1.10:2379,https://127.0.0.1:2379 \
+  --advertise-client-urls https://10.0.1.10:2379 \
+  --initial-cluster-token etcd-cluster-1 \
+  --initial-cluster infra0=https://10.0.1.10:2380,infra1=https://10.0.1.11:2380,infra2=https://10.0.1.12:2380 \
+  --initial-cluster-state new \
+  --client-cert-auth --trusted-ca-file=/path/to/ca-client.crt \
+  --cert-file=/path/to/infra0-client.crt --key-file=/path/to/infra0-client.key \
+  --peer-client-cert-auth --peer-trusted-ca-file=ca-peer.crt \
+  --peer-cert-file=/path/to/infra0-peer.crt --peer-key-file=/path/to/infra0-peer.key
+```
+```
+$ etcd --name infra1 --initial-advertise-peer-urls https://10.0.1.11:2380 \
+  --listen-peer-urls https://10.0.1.11:2380 \
+  --listen-client-urls https://10.0.1.11:2379,https://127.0.0.1:2379 \
+  --advertise-client-urls https://10.0.1.11:2379 \
+  --initial-cluster-token etcd-cluster-1 \
+  --initial-cluster infra0=https://10.0.1.10:2380,infra1=https://10.0.1.11:2380,infra2=https://10.0.1.12:2380 \
+  --initial-cluster-state new \
+  --client-cert-auth --trusted-ca-file=/path/to/ca-client.crt \
+  --cert-file=/path/to/infra1-client.crt --key-file=/path/to/infra1-client.key \
+  --peer-client-cert-auth --peer-trusted-ca-file=ca-peer.crt \
+  --peer-cert-file=/path/to/infra1-peer.crt --peer-key-file=/path/to/infra1-peer.key
+```
+```
+$ etcd --name infra2 --initial-advertise-peer-urls https://10.0.1.12:2380 \
+  --listen-peer-urls https://10.0.1.12:2380 \
+  --listen-client-urls https://10.0.1.12:2379,https://127.0.0.1:2379 \
+  --advertise-client-urls https://10.0.1.12:2379 \
+  --initial-cluster-token etcd-cluster-1 \
+  --initial-cluster infra0=https://10.0.1.10:2380,infra1=https://10.0.1.11:2380,infra2=https://10.0.1.12:2380 \
+  --initial-cluster-state new \
+  --client-cert-auth --trusted-ca-file=/path/to/ca-client.crt \
+  --cert-file=/path/to/infra2-client.crt --key-file=/path/to/infra2-client.key \
+  --peer-client-cert-auth --peer-trusted-ca-file=ca-peer.crt \
+  --peer-cert-file=/path/to/infra2-peer.crt --peer-key-file=/path/to/infra2-peer.key
+```
+
+#### Automatic certificates
+
+If the cluster needs encrypted communication but does not require authenticated connections, etcd can be configured to automatically generate its keys. On initialization, each member creates its own set of keys based on its advertised IP addresses and hosts.
+
+On each machine, etcd would be started with these flag:
+
+```
+$ etcd --name infra0 --initial-advertise-peer-urls https://10.0.1.10:2380 \
+  --listen-peer-urls https://10.0.1.10:2380 \
+  --listen-client-urls https://10.0.1.10:2379,https://127.0.0.1:2379 \
+  --advertise-client-urls https://10.0.1.10:2379 \
+  --initial-cluster-token etcd-cluster-1 \
+  --initial-cluster infra0=https://10.0.1.10:2380,infra1=https://10.0.1.11:2380,infra2=https://10.0.1.12:2380 \
+  --initial-cluster-state new \
+  --auto-tls \
+  --peer-auto-tls
+```
+```
+$ etcd --name infra1 --initial-advertise-peer-urls https://10.0.1.11:2380 \
+  --listen-peer-urls https://10.0.1.11:2380 \
+  --listen-client-urls https://10.0.1.11:2379,https://127.0.0.1:2379 \
+  --advertise-client-urls https://10.0.1.11:2379 \
+  --initial-cluster-token etcd-cluster-1 \
+  --initial-cluster infra0=https://10.0.1.10:2380,infra1=https://10.0.1.11:2380,infra2=https://10.0.1.12:2380 \
+  --initial-cluster-state new \
+  --auto-tls \
+  --peer-auto-tls
+```
+```
+$ etcd --name infra2 --initial-advertise-peer-urls https://10.0.1.12:2380 \
+  --listen-peer-urls https://10.0.1.12:2380 \
+  --listen-client-urls https://10.0.1.12:2379,https://127.0.0.1:2379 \
+  --advertise-client-urls https://10.0.1.12:2379 \
+  --initial-cluster-token etcd-cluster-1 \
+  --initial-cluster infra0=https://10.0.1.10:2380,infra1=https://10.0.1.11:2380,infra2=https://10.0.1.12:2380 \
+  --initial-cluster-state new \
+  --auto-tls \
+  --peer-auto-tls
+```
+
+### Error cases
+
+In the following example, we have not included our new host in the list of enumerated nodes. If this is a new cluster, the node _must_ be added to the list of initial cluster members.
+
+```
+$ etcd --name infra1 --initial-advertise-peer-urls http://10.0.1.11:2380 \
+  --listen-peer-urls https://10.0.1.11:2380 \
+  --listen-client-urls http://10.0.1.11:2379,http://127.0.0.1:2379 \
+  --advertise-client-urls http://10.0.1.11:2379 \
+  --initial-cluster infra0=http://10.0.1.10:2380 \
+  --initial-cluster-state new
+etcd: infra1 not listed in the initial cluster config
+exit 1
+```
+
+In this example, we are attempting to map a node (infra0) on a different address (127.0.0.1:2380) than its enumerated address in the cluster list (10.0.1.10:2380). If this node is to listen on multiple addresses, all addresses _must_ be reflected in the "initial-cluster" configuration directive.
+
+```
+$ etcd --name infra0 --initial-advertise-peer-urls http://127.0.0.1:2380 \
+  --listen-peer-urls http://10.0.1.10:2380 \
+  --listen-client-urls http://10.0.1.10:2379,http://127.0.0.1:2379 \
+  --advertise-client-urls http://10.0.1.10:2379 \
+  --initial-cluster infra0=http://10.0.1.10:2380,infra1=http://10.0.1.11:2380,infra2=http://10.0.1.12:2380 \
+  --initial-cluster-state=new
+etcd: error setting up initial cluster: infra0 has different advertised URLs in the cluster and advertised peer URLs list
+exit 1
+```
+
+If a peer is configured with a different set of configuration arguments and attempts to join this cluster, etcd will report a cluster ID mismatch will exit.
+
+```
+$ etcd --name infra3 --initial-advertise-peer-urls http://10.0.1.13:2380 \
+  --listen-peer-urls http://10.0.1.13:2380 \
+  --listen-client-urls http://10.0.1.13:2379,http://127.0.0.1:2379 \
+  --advertise-client-urls http://10.0.1.13:2379 \
+  --initial-cluster infra0=http://10.0.1.10:2380,infra1=http://10.0.1.11:2380,infra3=http://10.0.1.13:2380 \
+  --initial-cluster-state=new
+etcd: conflicting cluster ID to the target cluster (c6ab534d07e8fcc4 != bc25ea2a74fb18b0). Exiting.
+exit 1
+```
+
+## Discovery
+
+In a number of cases, the IPs of the cluster peers may not be known ahead of time. This is common when utilizing cloud providers or when the network uses DHCP. In these cases, rather than specifying a static configuration, use an existing etcd cluster to bootstrap a new one. We call this process "discovery".
+
+There two methods that can be used for discovery:
+
+* etcd discovery service
+* DNS SRV records
+
+### etcd discovery
+
+To better understand the design about discovery service protocol, we suggest reading the discovery service protocol [documentation][discovery-proto].
+
+#### Lifetime of a discovery URL
+
+A discovery URL identifies a unique etcd cluster. Instead of reusing a discovery URL, always create discovery URLs for new clusters.
+
+Moreover, discovery URLs should ONLY be used for the initial bootstrapping of a cluster. To change cluster membership after the cluster is already running, see the [runtime reconfiguration][runtime-conf] guide.
+
+#### Custom etcd discovery service
+
+Discovery uses an existing cluster to bootstrap itself. If using a private etcd cluster, can create a URL like so:
+
+```
+$ curl -X PUT https://myetcd.local/v2/keys/discovery/6c007a14875d53d9bf0ef5a6fc0257c817f0fb83/_config/size -d value=3
+```
+
+By setting the size key to the URL, a discovery URL is created with an expected cluster size of 3.
+
+The URL to use in this case will be `https://myetcd.local/v2/keys/discovery/6c007a14875d53d9bf0ef5a6fc0257c817f0fb83` and the etcd members will use the `https://myetcd.local/v2/keys/discovery/6c007a14875d53d9bf0ef5a6fc0257c817f0fb83` directory for registration as they start.
+
+**Each member must have a different name flag specified. `Hostname` or `machine-id` can be a good choice. Or discovery will fail due to duplicated name.**
+
+Now we start etcd with those relevant flags for each member:
+
+```
+$ etcd --name infra0 --initial-advertise-peer-urls http://10.0.1.10:2380 \
+  --listen-peer-urls http://10.0.1.10:2380 \
+  --listen-client-urls http://10.0.1.10:2379,http://127.0.0.1:2379 \
+  --advertise-client-urls http://10.0.1.10:2379 \
+  --discovery https://myetcd.local/v2/keys/discovery/6c007a14875d53d9bf0ef5a6fc0257c817f0fb83
+```
+```
+$ etcd --name infra1 --initial-advertise-peer-urls http://10.0.1.11:2380 \
+  --listen-peer-urls http://10.0.1.11:2380 \
+  --listen-client-urls http://10.0.1.11:2379,http://127.0.0.1:2379 \
+  --advertise-client-urls http://10.0.1.11:2379 \
+  --discovery https://myetcd.local/v2/keys/discovery/6c007a14875d53d9bf0ef5a6fc0257c817f0fb83
+```
+```
+$ etcd --name infra2 --initial-advertise-peer-urls http://10.0.1.12:2380 \
+  --listen-peer-urls http://10.0.1.12:2380 \
+  --listen-client-urls http://10.0.1.12:2379,http://127.0.0.1:2379 \
+  --advertise-client-urls http://10.0.1.12:2379 \
+  --discovery https://myetcd.local/v2/keys/discovery/6c007a14875d53d9bf0ef5a6fc0257c817f0fb83
+```
+
+This will cause each member to register itself with the custom etcd discovery service and begin the cluster once all machines have been registered.
+
+#### Public etcd discovery service
+
+If no exiting cluster is available, use the public discovery service hosted at `discovery.etcd.io`.  To create a private discovery URL using the "new" endpoint, use the command:
+
+```
+$ curl https://discovery.etcd.io/new?size=3
+https://discovery.etcd.io/3e86b59982e49066c5d813af1c2e2579cbf573de
+```
+
+This will create the cluster with an initial expected size of 3 members. If no size is specified, a default of 3 is used.
+
+```
+ETCD_DISCOVERY=https://discovery.etcd.io/3e86b59982e49066c5d813af1c2e2579cbf573de
+```
+
+```
+--discovery https://discovery.etcd.io/3e86b59982e49066c5d813af1c2e2579cbf573de
+```
+
+**Each member must have a different name flag specified. `Hostname` or `machine-id` can be a good choice. Or discovery will fail due to duplicated name.**
+
+Now we start etcd with those relevant flags for each member:
+
+```
+$ etcd --name infra0 --initial-advertise-peer-urls http://10.0.1.10:2380 \
+  --listen-peer-urls http://10.0.1.10:2380 \
+  --listen-client-urls http://10.0.1.10:2379,http://127.0.0.1:2379 \
+  --advertise-client-urls http://10.0.1.10:2379 \
+  --discovery https://discovery.etcd.io/3e86b59982e49066c5d813af1c2e2579cbf573de
+```
+```
+$ etcd --name infra1 --initial-advertise-peer-urls http://10.0.1.11:2380 \
+  --listen-peer-urls http://10.0.1.11:2380 \
+  --listen-client-urls http://10.0.1.11:2379,http://127.0.0.1:2379 \
+  --advertise-client-urls http://10.0.1.11:2379 \
+  --discovery https://discovery.etcd.io/3e86b59982e49066c5d813af1c2e2579cbf573de
+```
+```
+$ etcd --name infra2 --initial-advertise-peer-urls http://10.0.1.12:2380 \
+  --listen-peer-urls http://10.0.1.12:2380 \
+  --listen-client-urls http://10.0.1.12:2379,http://127.0.0.1:2379 \
+  --advertise-client-urls http://10.0.1.12:2379 \
+  --discovery https://discovery.etcd.io/3e86b59982e49066c5d813af1c2e2579cbf573de
+```
+
+This will cause each member to register itself with the discovery service and begin the cluster once all members have been registered.
+
+Use the environment variable `ETCD_DISCOVERY_PROXY` to cause etcd to use an HTTP proxy to connect to the discovery service.
+
+#### Error and warning cases
+
+##### Discovery server errors
+
+
+```
+$ etcd --name infra0 --initial-advertise-peer-urls http://10.0.1.10:2380 \
+  --listen-peer-urls http://10.0.1.10:2380 \
+  --listen-client-urls http://10.0.1.10:2379,http://127.0.0.1:2379 \
+  --advertise-client-urls http://10.0.1.10:2379 \
+  --discovery https://discovery.etcd.io/3e86b59982e49066c5d813af1c2e2579cbf573de
+etcd: error: the cluster doesn’t have a size configuration value in https://discovery.etcd.io/3e86b59982e49066c5d813af1c2e2579cbf573de/_config
+exit 1
+```
+
+##### Warnings
+
+This is a harmless warning indicating the discovery URL will be ignored on this machine.
+
+```
+$ etcd --name infra0 --initial-advertise-peer-urls http://10.0.1.10:2380 \
+  --listen-peer-urls http://10.0.1.10:2380 \
+  --listen-client-urls http://10.0.1.10:2379,http://127.0.0.1:2379 \
+  --advertise-client-urls http://10.0.1.10:2379 \
+  --discovery https://discovery.etcd.io/3e86b59982e49066c5d813af1c2e2579cbf573de
+etcdserver: discovery token ignored since a cluster has already been initialized. Valid log found at /var/lib/etcd
+```
+
+### DNS discovery
+
+DNS [SRV records][rfc-srv] can be used as a discovery mechanism.
+The `-discovery-srv` flag can be used to set the DNS domain name where the discovery SRV records can be found.
+The following DNS SRV records are looked up in the listed order:
+
+* _etcd-server-ssl._tcp.example.com
+* _etcd-server._tcp.example.com
+
+If `_etcd-server-ssl._tcp.example.com` is found then etcd will attempt the bootstrapping process over TLS.
+
+To help clients discover the etcd cluster, the following DNS SRV records are looked up in the listed order:
+
+* _etcd-client._tcp.example.com
+* _etcd-client-ssl._tcp.example.com
+
+If `_etcd-client-ssl._tcp.example.com` is found, clients will attempt to communicate with the etcd cluster over SSL/TLS.
+
+If etcd is using TLS without a custom certificate authority, the discovery domain (e.g., example.com) must match the SRV record domain (e.g., infra1.example.com). This is to mitigate attacks that forge SRV records to point to a different domain; the domain would have a valid certificate under PKI but be controlled by an unknown third party.
+
+#### Create DNS SRV records
+
+```
+$ dig +noall +answer SRV _etcd-server._tcp.example.com
+_etcd-server._tcp.example.com. 300 IN  SRV  0 0 2380 infra0.example.com.
+_etcd-server._tcp.example.com. 300 IN  SRV  0 0 2380 infra1.example.com.
+_etcd-server._tcp.example.com. 300 IN  SRV  0 0 2380 infra2.example.com.
+```
+
+```
+$ dig +noall +answer SRV _etcd-client._tcp.example.com
+_etcd-client._tcp.example.com. 300 IN SRV 0 0 2379 infra0.example.com.
+_etcd-client._tcp.example.com. 300 IN SRV 0 0 2379 infra1.example.com.
+_etcd-client._tcp.example.com. 300 IN SRV 0 0 2379 infra2.example.com.
+```
+
+```
+$ dig +noall +answer infra0.example.com infra1.example.com infra2.example.com
+infra0.example.com.  300  IN  A  10.0.1.10
+infra1.example.com.  300  IN  A  10.0.1.11
+infra2.example.com.  300  IN  A  10.0.1.12
+```
+
+#### Bootstrap the etcd cluster using DNS
+
+etcd cluster members can listen on domain names or IP address, the bootstrap process will resolve DNS A records.
+
+The resolved address in `--initial-advertise-peer-urls` *must match* one of the resolved addresses in the SRV targets. The etcd member reads the resolved address to find out if it belongs to the cluster defined in the SRV records.
+
+```
+$ etcd --name infra0 \
+--discovery-srv example.com \
+--initial-advertise-peer-urls http://infra0.example.com:2380 \
+--initial-cluster-token etcd-cluster-1 \
+--initial-cluster-state new \
+--advertise-client-urls http://infra0.example.com:2379 \
+--listen-client-urls http://infra0.example.com:2379 \
+--listen-peer-urls http://infra0.example.com:2380
+```
+
+```
+$ etcd --name infra1 \
+--discovery-srv example.com \
+--initial-advertise-peer-urls http://infra1.example.com:2380 \
+--initial-cluster-token etcd-cluster-1 \
+--initial-cluster-state new \
+--advertise-client-urls http://infra1.example.com:2379 \
+--listen-client-urls http://infra1.example.com:2379 \
+--listen-peer-urls http://infra1.example.com:2380
+```
+
+```
+$ etcd --name infra2 \
+--discovery-srv example.com \
+--initial-advertise-peer-urls http://infra2.example.com:2380 \
+--initial-cluster-token etcd-cluster-1 \
+--initial-cluster-state new \
+--advertise-client-urls http://infra2.example.com:2379 \
+--listen-client-urls http://infra2.example.com:2379 \
+--listen-peer-urls http://infra2.example.com:2380
+```
+
+The cluster can also bootstrap using IP addresses instead of domain names:
+
+```
+$ etcd --name infra0 \
+--discovery-srv example.com \
+--initial-advertise-peer-urls http://10.0.1.10:2380 \
+--initial-cluster-token etcd-cluster-1 \
+--initial-cluster-state new \
+--advertise-client-urls http://10.0.1.10:2379 \
+--listen-client-urls http://10.0.1.10:2379 \
+--listen-peer-urls http://10.0.1.10:2380
+```
+
+```
+$ etcd --name infra1 \
+--discovery-srv example.com \
+--initial-advertise-peer-urls http://10.0.1.11:2380 \
+--initial-cluster-token etcd-cluster-1 \
+--initial-cluster-state new \
+--advertise-client-urls http://10.0.1.11:2379 \
+--listen-client-urls http://10.0.1.11:2379 \
+--listen-peer-urls http://10.0.1.11:2380
+```
+
+```
+$ etcd --name infra2 \
+--discovery-srv example.com \
+--initial-advertise-peer-urls http://10.0.1.12:2380 \
+--initial-cluster-token etcd-cluster-1 \
+--initial-cluster-state new \
+--advertise-client-urls http://10.0.1.12:2379 \
+--listen-client-urls http://10.0.1.12:2379 \
+--listen-peer-urls http://10.0.1.12:2380
+```
+
+### Proxy
+
+When the `--proxy` flag is set, etcd runs in [proxy mode][proxy]. This proxy mode only supports the etcd v2 API; there are no plans to support the v3 API. Instead, for v3 API support, there will be a new proxy with enhanced features following the etcd 3.0 release.
+
+To setup an etcd cluster with proxies of v2 API, please read the the [clustering doc in etcd 2.3 release][clustering_etcd2].
+
+[conf-adv-client]: configuration.md#--advertise-client-urls
+[conf-listen-client]: configuration.md#--listen-client-urls
+[discovery-proto]: ../dev-internal/discovery_protocol.md
+[rfc-srv]: http://www.ietf.org/rfc/rfc2052.txt
+[runtime-conf]: runtime-configuration.md
+[runtime-reconf-design]: runtime-reconf-design.md
+[proxy]: https://github.com/coreos/etcd/blob/release-2.3/Documentation/proxy.md
+[clustering_etcd2]: https://github.com/coreos/etcd/blob/release-2.3/Documentation/clustering.md
+[security-guide]: security.md
+[tls-setup]: /hack/tls-setup

Documentation/op-guide/configuration.md

@@ -0,0 +1,290 @@
+# Configuration flags
+
+etcd is configurable through command-line flags and environment variables. Options set on the command line take precedence over those from the environment.
+
+The format of environment variable for flag `--my-flag` is `ETCD_MY_FLAG`. It applies to all flags.
+
+The [official etcd ports][iana-ports] are 2379 for client requests and 2380 for peer communication. The etcd ports can be set to accept TLS traffic, non-TLS traffic, or both TLS and non-TLS traffic.
+
+To start etcd automatically using custom settings at startup in Linux, using a [systemd][systemd-intro] unit is highly recommended.
+
+## Member flags
+
+### --name
++ Human-readable name for this member.
++ default: "default"
++ env variable: ETCD_NAME
++ This value is referenced as this node's own entries listed in the `--initial-cluster` flag (e.g., `default=http://localhost:2380`). This needs to match the key used in the flag if using [static bootstrapping][build-cluster]. When using discovery, each member must have a unique name. `Hostname` or `machine-id` can be a good choice.
+
+### --data-dir
++ Path to the data directory.
++ default: "${name}.etcd"
++ env variable: ETCD_DATA_DIR
+
+### --wal-dir
++ Path to the dedicated wal directory. If this flag is set, etcd will write the WAL files to the walDir rather than the dataDir. This allows a dedicated disk to be used, and helps avoid io competition between logging and other IO operations.
++ default: ""
++ env variable: ETCD_WAL_DIR
+
+### --snapshot-count
++ Number of committed transactions to trigger a snapshot to disk.
++ default: "10000"
++ env variable: ETCD_SNAPSHOT_COUNT
+
+### --heartbeat-interval
++ Time (in milliseconds) of a heartbeat interval.
++ default: "100"
++ env variable: ETCD_HEARTBEAT_INTERVAL
+
+### --election-timeout
++ Time (in milliseconds) for an election to timeout. See [Documentation/tuning.md][tuning] for details.
++ default: "1000"
++ env variable: ETCD_ELECTION_TIMEOUT
+
+### --listen-peer-urls
++ List of URLs to listen on for peer traffic. This flag tells the etcd to accept incoming requests from its peers on the specified scheme://IP:port combinations. Scheme can be either http or https.If 0.0.0.0 is specified as the IP, etcd listens to the given port on all interfaces. If an IP address is given as well as a port, etcd will listen on the given port and interface. Multiple URLs may be used to specify a number of addresses and ports to listen on. The etcd will respond to requests from any of the listed addresses and ports.
++ default: "http://localhost:2380"
++ env variable: ETCD_LISTEN_PEER_URLS
++ example: "http://10.0.0.1:2380"
++ invalid example: "http://example.com:2380" (domain name is invalid for binding)
+
+### --listen-client-urls
++ List of URLs to listen on for client traffic. This flag tells the etcd to accept incoming requests from the clients on the specified scheme://IP:port combinations. Scheme can be either http or https. If 0.0.0.0 is specified as the IP, etcd listens to the given port on all interfaces. If an IP address is given as well as a port, etcd will listen on the given port and interface. Multiple URLs may be used to specify a number of addresses and ports to listen on. The etcd will respond to requests from any of the listed addresses and ports.
++ default: "http://localhost:2379"
++ env variable: ETCD_LISTEN_CLIENT_URLS
++ example: "http://10.0.0.1:2379"
++ invalid example: "http://example.com:2379" (domain name is invalid for binding)
+
+### --max-snapshots
++ Maximum number of snapshot files to retain (0 is unlimited)
++ default: 5
++ env variable: ETCD_MAX_SNAPSHOTS
++ The default for users on Windows is unlimited, and manual purging down to 5 (or some preference for safety) is recommended.
+
+### --max-wals
++ Maximum number of wal files to retain (0 is unlimited)
++ default: 5
++ env variable: ETCD_MAX_WALS
++ The default for users on Windows is unlimited, and manual purging down to 5 (or some preference for safety) is recommended.
+
+### --cors
++ Comma-separated white list of origins for CORS (cross-origin resource sharing).
++ default: none
++ env variable: ETCD_CORS
+
+## Clustering flags
+
+`--initial` prefix flags are used in bootstrapping ([static bootstrap][build-cluster], [discovery-service bootstrap][discovery] or [runtime reconfiguration][reconfig]) a new member, and ignored when restarting an existing member.
+
+`--discovery` prefix flags need to be set when using [discovery service][discovery].
+
+### --initial-advertise-peer-urls
+
++ List of this member's peer URLs to advertise to the rest of the cluster. These addresses are used for communicating etcd data around the cluster. At least one must be routable to all cluster members. These URLs can contain domain names.
++ default: "http://localhost:2380"
++ env variable: ETCD_INITIAL_ADVERTISE_PEER_URLS
++ example: "http://example.com:2380, http://10.0.0.1:2380"
+
+### --initial-cluster
++ Initial cluster configuration for bootstrapping.
++ default: "default=http://localhost:2380"
++ env variable: ETCD_INITIAL_CLUSTER
++ The key is the value of the `--name` flag for each node provided. The default uses `default` for the key because this is the default for the `--name` flag.
+
+### --initial-cluster-state
++ Initial cluster state ("new" or "existing"). Set to `new` for all members present during initial static or DNS bootstrapping. If this option is set to `existing`, etcd will attempt to join the existing cluster. If the wrong value is set, etcd will attempt to start but fail safely.
++ default: "new"
++ env variable: ETCD_INITIAL_CLUSTER_STATE
+
+[static bootstrap]: clustering.md#static
+
+### --initial-cluster-token
++ Initial cluster token for the etcd cluster during bootstrap.
++ default: "etcd-cluster"
++ env variable: ETCD_INITIAL_CLUSTER_TOKEN
+
+### --advertise-client-urls
++ List of this member's client URLs to advertise to the rest of the cluster. These URLs can contain domain names.
++ default: "http://localhost:2379"
++ env variable: ETCD_ADVERTISE_CLIENT_URLS
++ example: "http://example.com:2379, http://10.0.0.1:2379"
++ Be careful if advertising URLs such as http://localhost:2379 from a cluster member and are using the proxy feature of etcd. This will cause loops, because the proxy will be forwarding requests to itself until its resources (memory, file descriptors) are eventually depleted.
+
+### --discovery
++ Discovery URL used to bootstrap the cluster.
++ default: none
++ env variable: ETCD_DISCOVERY
+
+### --discovery-srv
++ DNS srv domain used to bootstrap the cluster.
++ default: none
++ env variable: ETCD_DISCOVERY_SRV
+
+### --discovery-fallback
++ Expected behavior ("exit" or "proxy") when discovery services fails. "proxy" supports v2 API only.
++ default: "proxy"
++ env variable: ETCD_DISCOVERY_FALLBACK
+
+### --discovery-proxy
++ HTTP proxy to use for traffic to discovery service.
++ default: none
++ env variable: ETCD_DISCOVERY_PROXY
+
+### --strict-reconfig-check
++ Reject reconfiguration requests that would cause quorum loss.
++ default: false
++ env variable: ETCD_STRICT_RECONFIG_CHECK
+
+### --auto-compaction-retention
++ Auto compaction retention for mvcc key value store in hour. 0 means disable auto compaction.
++ default: 0
++ env variable: ETCD_AUTO_COMPACTION_RETENTION
+
+## Proxy flags
+
+`--proxy` prefix flags configures etcd to run in [proxy mode][proxy]. "proxy" supports v2 API only.
+
+### --proxy
++ Proxy mode setting ("off", "readonly" or "on").
++ default: "off"
++ env variable: ETCD_PROXY
+
+### --proxy-failure-wait
++ Time (in milliseconds) an endpoint will be held in a failed state before being reconsidered for proxied requests.
++ default: 5000
++ env variable: ETCD_PROXY_FAILURE_WAIT
+
+### --proxy-refresh-interval
++ Time (in milliseconds) of the endpoints refresh interval.
++ default: 30000
++ env variable: ETCD_PROXY_REFRESH_INTERVAL
+
+### --proxy-dial-timeout
++ Time (in milliseconds) for a dial to timeout or 0 to disable the timeout
++ default: 1000
++ env variable: ETCD_PROXY_DIAL_TIMEOUT
+
+### --proxy-write-timeout
++ Time (in milliseconds) for a write to timeout or 0 to disable the timeout.
++ default: 5000
++ env variable: ETCD_PROXY_WRITE_TIMEOUT
+
+### --proxy-read-timeout
++ Time (in milliseconds) for a read to timeout or 0 to disable the timeout.
++ Don't change this value if using watches because use long polling requests.
++ default: 0
++ env variable: ETCD_PROXY_READ_TIMEOUT
+
+## Security flags
+
+The security flags help to [build a secure etcd cluster][security].
+
+### --ca-file [DEPRECATED]
++ Path to the client server TLS CA file. `--ca-file ca.crt` could be replaced by `--trusted-ca-file ca.crt --client-cert-auth` and etcd will perform the same.
++ default: none
++ env variable: ETCD_CA_FILE
+
+### --cert-file
++ Path to the client server TLS cert file.
++ default: none
++ env variable: ETCD_CERT_FILE
+
+### --key-file
++ Path to the client server TLS key file.
++ default: none
++ env variable: ETCD_KEY_FILE
+
+### --client-cert-auth
++ Enable client cert authentication.
++ default: false
++ env variable: ETCD_CLIENT_CERT_AUTH
+
+### --trusted-ca-file
++ Path to the client server TLS trusted CA key file.
++ default: none
++ env variable: ETCD_TRUSTED_CA_FILE
+
+### --auto-tls
++ Client TLS using generated certificates
++ default: false
++ env variable: ETCD_AUTO_TLS
+
+### --peer-ca-file [DEPRECATED]
++ Path to the peer server TLS CA file. `--peer-ca-file ca.crt` could be replaced by `--peer-trusted-ca-file ca.crt --peer-client-cert-auth` and etcd will perform the same.
++ default: none
++ env variable: ETCD_PEER_CA_FILE
+
+### --peer-cert-file
++ Path to the peer server TLS cert file.
++ default: none
++ env variable: ETCD_PEER_CERT_FILE
+
+### --peer-key-file
++ Path to the peer server TLS key file.
++ default: none
++ env variable: ETCD_PEER_KEY_FILE
+
+### --peer-client-cert-auth
++ Enable peer client cert authentication.
++ default: false
++ env variable: ETCD_PEER_CLIENT_CERT_AUTH
+
+### --peer-trusted-ca-file
++ Path to the peer server TLS trusted CA file.
++ default: none
++ env variable: ETCD_PEER_TRUSTED_CA_FILE
+
+### --peer-auto-tls
++ Peer TLS using generated certificates
++ default: false
++ env variable: ETCD_PEER_AUTO_TLS
+
+## Logging flags
+
+### --debug
++ Drop the default log level to DEBUG for all subpackages.
++ default: false (INFO for all packages)
++ env variable: ETCD_DEBUG
+
+### --log-package-levels
++ Set individual etcd subpackages to specific log levels. An example being `etcdserver=WARNING,security=DEBUG` 
++ default: none (INFO for all packages)
++ env variable: ETCD_LOG_PACKAGE_LEVELS
+
+
+## Unsafe flags
+
+Please be CAUTIOUS when using unsafe flags because it will break the guarantees given by the consensus protocol.
+For example, it may panic if other members in the cluster are still alive.
+Follow the instructions when using these flags.
+
+### --force-new-cluster
++ Force to create a new one-member cluster. It commits configuration changes forcing to remove all existing members in the cluster and add itself. It needs to be set to [restore a backup][restore].
++ default: false
++ env variable: ETCD_FORCE_NEW_CLUSTER
+
+## Miscellaneous flags
+
+### --version
++ Print the version and exit.
++ default: false
+
+### --config-file
++ Load server configuration from a file.
++ default: none
+
+## Profiling flags
+
+### --enable-pprof
++ Enable runtime profiling data via HTTP server. Address is at client URL + "/debug/pprof"
++ default: false
+
+[build-cluster]: clustering.md#static
+[reconfig]: runtime-configuration.md
+[discovery]: clustering.md#discovery
+[iana-ports]: https://www.iana.org/assignments/service-names-port-numbers/service-names-port-numbers.xhtml?search=etcd
+[proxy]: ../v2/proxy.md
+[restore]: ../v2/admin_guide.md#restoring-a-backup
+[security]: security.md
+[systemd-intro]: http://freedesktop.org/wiki/Software/systemd/
+[tuning]: ../tuning.md#time-parameters

Documentation/op-guide/container.md

@@ -0,0 +1,61 @@
+# Run etcd clusters inside containers
+
+The following guide shows how to run etcd with rkt and Docker using the [static bootstrap process](clustering.md#static).
+
+## Docker
+
+In order to expose the etcd API to clients outside of Docker host, use the host IP address of the container. Please see [`docker inspect`](https://docs.docker.com/engine/reference/commandline/inspect) for more detail on how to get the IP address. Alternatively, specify `--net=host` flag to `docker run` command to skip placing the container inside of a separate network stack.
+
+```
+# For each machine
+ETCD_VERSION=v3.0.0
+TOKEN=my-etcd-token
+CLUSTER_STATE=new
+NAME_1=etcd-node-0
+NAME_2=etcd-node-1
+NAME_3=etcd-node-2
+HOST_1=10.20.30.1
+HOST_2=10.20.30.2
+HOST_3=10.20.30.3
+CLUSTER=${NAME_1}=http://${HOST_1}:2380,${NAME_2}=http://${HOST_2}:2380,${NAME_3}=http://${HOST_3}:2380
+
+# For node 1
+THIS_NAME=${NAME_1}
+THIS_IP=${HOST_1}
+sudo docker run --net=host --name etcd quay.io/coreos/etcd:${ETCD_VERSION} \
+	/usr/local/bin/etcd \
+    --data-dir=data.etcd --name ${THIS_NAME} \
+	--initial-advertise-peer-urls http://${THIS_IP}:2380 --listen-peer-urls http://${THIS_IP}:2380 \
+	--advertise-client-urls http://${THIS_IP}:2379 --listen-client-urls http://${THIS_IP}:2379 \
+	--initial-cluster ${CLUSTER} \
+	--initial-cluster-state ${CLUSTER_STATE} --initial-cluster-token ${TOKEN}
+
+# For node 2
+THIS_NAME=${NAME_2}
+THIS_IP=${HOST_2}
+sudo docker run --net=host --name etcd quay.io/coreos/etcd:${ETCD_VERSION} \
+	/usr/local/bin/etcd \
+    --data-dir=data.etcd --name ${THIS_NAME} \
+	--initial-advertise-peer-urls http://${THIS_IP}:2380 --listen-peer-urls http://${THIS_IP}:2380 \
+	--advertise-client-urls http://${THIS_IP}:2379 --listen-client-urls http://${THIS_IP}:2379 \
+	--initial-cluster ${CLUSTER} \
+	--initial-cluster-state ${CLUSTER_STATE} --initial-cluster-token ${TOKEN}
+
+# For node 3
+THIS_NAME=${NAME_3}
+THIS_IP=${HOST_3}
+sudo docker run --net=host --name etcd quay.io/coreos/etcd:${ETCD_VERSION} \
+	/usr/local/bin/etcd \
+    --data-dir=data.etcd --name ${THIS_NAME} \
+	--initial-advertise-peer-urls http://${THIS_IP}:2380 --listen-peer-urls http://${THIS_IP}:2380 \
+	--advertise-client-urls http://${THIS_IP}:2379 --listen-client-urls http://${THIS_IP}:2379 \
+	--initial-cluster ${CLUSTER} \
+	--initial-cluster-state ${CLUSTER_STATE} --initial-cluster-token ${TOKEN}
+```
+
+To run `etcdctl` using API version 3:
+
+```
+docker exec etcd /bin/sh -c "export ETCDCTL_API=3 && /usr/local/bin/etcdctl put foo bar"
+```
+

Documentation/op-guide/failures.md

@@ -0,0 +1,44 @@
+# Understand failures
+
+Failures are common in a large deployment of machines. A machine fails when its hardware or software malfunctions. Multiple machines fail together when there are power failures or network issues. Multiple kinds of failures can also happen at once; it is almost impossible to enumerate all possible failure cases. 
+
+In this section, we catalog kinds of failures and discuss how etcd is designed to tolerate these failures. Most users, if not all, can map a particular failure into one kind of failure. To prepare for rare or [unrecoverable failures][unrecoverable], always [back up][backup] the etcd cluster.
+
+## Minor followers failure
+
+When fewer than half of the followers fail, the etcd cluster can still accept requests and make progress without any major disruption. For example, two follower failures will not affect a five member etcd cluster’s operation. However, clients will lose connectivity to the failed members. Client libraries should hide these interruptions from users for read requests by automatically reconnecting to other members. Operators should expect the system load on the other members to increase due to the reconnections.
+
+## Leader failure
+
+When a leader fails, the etcd cluster automatically elects a new leader. The election does not happen instantly once the leader fails. It takes about an election timeout to elect a new leader since the failure detection model is timeout based. 
+
+During the leader election the cluster cannot process any writes. Write requests sent during the election are queued for processing until a new leader is elected.
+
+Writes already sent to the old leader but not yet committed may be lost. The new leader has the power to rewrite any uncommitted entries from the previous leader. From the user perspective, some write requests might time out after a new leader election. However, no committed writes are ever lost.
+
+The new leader extends timeouts automatically for all leases. This mechanism ensures a lease will not expire before the granted TTL even if it was granted by the old leader. 
+
+## Majority failure
+
+When the majority members of the cluster fail, the etcd cluster fails and cannot accept more writes.
+
+The etcd cluster can only recover from a majority failure once the majority of members become available. If a majority of members cannot come back online, then the operator must start [disaster recovery][unrecoverable] to recover the cluster.
+
+Once a majority of members works, the etcd cluster elects a new leader automatically and returns to a healthy state. The new leader extends timeouts automatically for all leases. This mechanism ensures no lease expires due to server side unavailability.
+
+## Network partition
+
+A network partition is similar to a minor followers failure or a leader failure. A network partition divides the etcd cluster into two parts; one with a member majority and the other with a member minority. The majority side becomes the available cluster and the minority side is unavailable; there is no “split-brain” in etcd. 
+
+If the leader is on the majority side, then from the majority point of view the failure is a minority follower failure. If the leader is on the minority side, then it is a leader failure. The leader on the minority side steps down and the majority side elects a new leader.
+
+Once the network partition clears, the minority side automatically recognizes the leader from the majority side and recovers its state. 
+
+## Failure during bootstrapping
+
+A cluster bootstrap is only successful if all required members successfully start. If any failure happens during bootstrapping, remove the data directories on all members and re-bootstrap the cluster with a new cluster-token or new discovery token.
+
+Of course, it is possible to recover a failed bootstrapped cluster like recovering a running cluster. However, it almost always takes more time and resources to recover that cluster than bootstrapping a new one, since there is no data to recover.
+
+[backup]: maintenance.md#snapshot-backup
+[unrecoverable]: recovery.md#disaster-recovery

Documentation/op-guide/maintenance.md

@@ -0,0 +1,115 @@
+# Maintenance
+
+## Overview
+
+An etcd cluster needs periodic maintenance to remain reliable. Depending on an etcd application's needs, this maintenance can usually be automated and performed without downtime or significantly degraded performance.
+
+All etcd maintenance manages storage resources consumed by the etcd keyspace. Failure to adequately control the keyspace size is guarded by storage space quotas; if an etcd member runs low on space, a quota will trigger cluster-wide alarms which will put the system into a limited-operation maintenance mode. To avoid running out of space for writes to the keyspace, the etcd keyspace history must be compacted. Storage space itself may be reclaimed by defragmenting etcd members. Finally, periodic snapshot backups of etcd member state makes it possible to recover any unintended logical data loss or corruption caused by operational error.
+
+## History compaction
+
+Since etcd keeps an exact history of its keyspace, this history should be periodically compacted to avoid performance degradation and eventual storage space exhaustion. Compacting the keyspace history drops all information about keys superseded prior to a given keyspace revision. The space used by these keys then becomes available for additional writes to the keyspace.
+
+The keyspace can be compacted automatically with `etcd`'s time windowed history retention policy, or manually with `etcdctl`. The `etcdctl` method provides fine-grained control over the compacting process whereas automatic compacting fits applications that only need key history for some length of time.
+
+`etcd` can be set to automatically compact the keyspace with the `--auto-compaction` option with a period of hours:
+
+```sh
+# keep one hour of history
+$ etcd --auto-compaction-retention=1
+```
+
+An `etcdctl` initiated compaction works as follows:
+
+```sh
+# compact up to revision 3
+$ etcdctl compact 3
+
+```
+
+Revisions prior to the compaction revision become inaccessible:
+
+```sh
+$ etcdctl get --rev=2 somekey
+Error:  rpc error: code = 11 desc = etcdserver: mvcc: required revision has been compacted
+```
+
+## Defragmentation
+
+After compacting the keyspace, the backend database may exhibit internal fragmentation. Any internal fragmentation is space that is free to use by the backend but still consumes storage space. The process of defragmentation releases this storage space back to the file system. Defragmentation is issued on a per-member so that cluster-wide latency spikes may be avoided.
+
+Compacting old revisions internally fragments `etcd` by leaving gaps in backend database. Fragmented space is available for use by `etcd` but unavailable to the host filesystem.
+
+To defragment an etcd member, use the `etcdctl defrag` command:
+
+```sh
+$ etcdctl defrag
+Finished defragmenting etcd member[127.0.0.1:2379]
+```
+
+## Space quota
+
+The space quota in `etcd` ensures the cluster operates in a reliable fashion. Without a space quota, `etcd` may suffer from poor performance if the keyspace grows excessively large, or it may simply run out of storage space, leading to unpredictable cluster behavior. If the keyspace's backend database for any member exceeds the space quota, `etcd` raises a cluster-wide alarm that puts the cluster into a maintenance mode which only accepts key reads and deletes. After freeing enough space in the keyspace, the alarm can be disarmed and the cluster will resume normal operation.
+
+By default, `etcd` sets a conservative space quota suitable for most applications, but it may be configured on the command line, in bytes:
+
+```sh
+# set a very small 16MB quota
+$ etcd --quota-backend-bytes=16777216
+```
+
+The space quota can be triggered with a loop:
+
+```sh
+# fill keyspace
+$ while [ 1 ]; do dd if=/dev/urandom bs=1024 count=1024  | etcdctl put key  || break; done
+...
+Error:  rpc error: code = 8 desc = etcdserver: mvcc: database space exceeded
+# confirm quota space is exceeded
+$ etcdctl --write-out=table endpoint status
++----------------+------------------+-----------+---------+-----------+-----------+------------+
+|    ENDPOINT    |        ID        |  VERSION  | DB SIZE | IS LEADER | RAFT TERM | RAFT INDEX |
++----------------+------------------+-----------+---------+-----------+-----------+------------+
+| 127.0.0.1:2379 | bf9071f4639c75cc | 2.3.0+git | 18 MB   | true      |         2 |       3332 |
++----------------+------------------+-----------+---------+-----------+-----------+------------+
+# confirm alarm is raised
+$ etcdctl alarm list
+memberID:13803658152347727308 alarm:NOSPACE 
+```
+
+Removing excessive keyspace data will put the cluster back within the quota limits so the alarm can be disarmed:
+
+```sh
+# get current revision
+$ etcdctl --endpoints=:2379 endpoint status
+[{"Endpoint":"127.0.0.1:2379","Status":{"header":{"cluster_id":8925027824743593106,"member_id":13803658152347727308,"revision":1516,"raft_term":2},"version":"2.3.0+git","dbSize":17973248,"leader":13803658152347727308,"raftIndex":6359,"raftTerm":2}}]
+# compact away all old revisions
+$ etdctl compact 1516
+compacted revision 1516
+# defragment away excessive space
+$ etcdctl defrag
+Finished defragmenting etcd member[127.0.0.1:2379]
+# disarm alarm
+$ etcdctl alarm disarm
+memberID:13803658152347727308 alarm:NOSPACE 
+# test puts are allowed again
+$ etdctl put newkey 123
+OK
+```
+
+## Snapshot backup
+
+Snapshotting the `etcd` cluster on a regular basis serves as a durable backup for an etcd keyspace. By taking periodic snapshots of an etcd member's backend database, an `etcd` cluster can be recovered to a point in time with a known good state.
+
+A snapshot is taken with `etcdctl`:
+
+```sh
+$ etcdctl snapshot save backup.db
+$ etcdctl --write-out=table snapshot status backup.db
++----------+----------+------------+------------+
+|   HASH   | REVISION | TOTAL KEYS | TOTAL SIZE |
++----------+----------+------------+------------+
+| fe01cf57 |       10 |          7 | 2.1 MB     |
++----------+----------+------------+------------+
+
+```

Documentation/op-guide/performance.md

@@ -0,0 +1,74 @@
+# Performance
+
+## Understanding performance
+
+etcd provides stable, sustained high performance. Two factors define performance: latency and throughput. Latency is the time taken to complete an operation. Throughput is the total operations completed within some time period. Usually average latency increases as the overall throughput increases when etcd accepts concurrent client requests. In common cloud environments, like a standard `n-4` on Google Compute Engine (GCE) or a comparable machine type on AWS, a three member etcd cluster finishes a request in less than one millisecond under light load, and can complete more than 30,000 requests per second under heavy load.
+
+etcd uses the Raft consensus algorithm to replicate requests among members and reach agreement. Consensus performance, especially commit latency, is limited by two physical constraints: network IO latency and disk IO latency. The minimum time to finish an etcd request is the network Round Trip Time (RTT) between members, plus the time `fdatasync` requires to commit the data to permanant storage. The RTT within a datacenter may be as long as several hundred microseconds. A typical RTT within the United States is around 50ms, and can be as slow as 400ms between continents. The typical fdatasync latency for a spinning disk is about 10ms. For SSDs, the latency is often lower than 1ms. To increase throughput, etcd batches multiple requests together and submits them to Raft. This batching policy lets etcd attain high throughput despite heavy load.
+
+There are other sub-systems which impact the overall performance of etcd. Each serialized etcd request must run through etcd’s boltdb-backed MVCC storage engine, which usually takes tens of microseconds to finish. Periodically etcd incrementally snapshots its recently applied requests, merging them back with the previous on-disk snapshot. This process may lead to a latency spike. Although this is usually not a problem on SSDs, it may double the observed latency on HDD. Likewise, inflight compactions can impact etcd’s performance. Fortunately, the impact is often insignificant since the compaction is staggered so it does not compete for resources with regular requests. The RPC system, gRPC, gives etcd a well-defined, extensible API, but it also introduces additional latency, especially for local reads.
+
+## Benchmarks
+
+Benchmarking etcd performance can be done with the [benchmark](https://github.com/coreos/etcd/tree/master/tools/benchmark) CLI tool included with etcd.
+
+For some baseline performance numbers, we consider a three member etcd cluster with the following hardware configuration:
+
+- Google Cloud Compute Engine
+- 3 machines of 8 vCPUs + 16GB Memory + 50GB SSD
+- 1 machine(client) of 16 vCPUs + 30GB Memory + 50GB SSD
+- Ubuntu 15.10
+- etcd v3 master branch (commit SHA d8f325d), Go 1.6.2
+
+With this configuration, etcd can approximately write:
+
+| Number of keys | Key size in bytes | Value size in bytes | Number of connections | Number of clients | Target etcd server | Average write QPS | Average latency per request | Memory |
+|----------------|-------------------|---------------------|-----------------------|-------------------|--------------------|-------------------|-----------------------------|--------|
+| 10,000 | 8 | 256 | 1 | 1 | leader only | 525 | 2ms | 35 MB |
+| 100,000 | 8 | 256 | 100 | 1000 | leader only | 25,000 | 30ms | 35 MB |
+| 100,000 | 8 | 256 | 100 | 1000 | all members | 33,000 | 25ms | 35 MB |
+
+Sample commands are:
+
+```
+# assuming IP_1 is leader, write requests to the leader
+benchmark --endpoints={IP_1} --conns=1 --clients=1 \
+    put --key-size=8 --sequential-keys --total=10000 --val-size=256
+benchmark --endpoints={IP_1} --conns=100 --clients=1000 \
+    put --key-size=8 --sequential-keys --total=100000 --val-size=256
+
+# write to all members
+benchmark --endpoints={IP_1},{IP_2},{IP_3} --conns=100 --clients=1000 \
+    put --key-size=8 --sequential-keys --total=100000 --val-size=256
+```
+
+Linearizable read requests go through a quorum of cluster members for consensus to fetch the most recent data. Serializable read requests are cheaper than linearizable reads since they are served by any single etcd member, instead of a quorum of members, in exchange for possibly serving stale data. etcd can read: 
+
+| Number of requests | Key size in bytes | Value size in bytes | Number of connections | Number of clients | Consistency | Average latency per request | Average read QPS |
+|--------------------|-------------------|---------------------|-----------------------|-------------------|-------------|-----------------------------|------------------|
+| 10,000 | 8 | 256 | 1 | 1 | Linearizable | 2ms | 560 |
+| 10,000 | 8 | 256 | 1 | 1 | Serializable | 0.4ms | 7,500 |
+| 100,000 | 8 | 256 | 100 | 1000 | Linearizable | 15ms | 43,000 |
+| 100,000 | 8 | 256 | 100 | 1000 | Serializable | 9ms | 93,000 |
+
+Sample commands are:
+
+```
+# Linearizable read requests
+benchmark --endpoints={IP_1},{IP_2},{IP_3} --conns=1 --clients=1 \
+    range YOUR_KEY --consistency=l --total=10000
+benchmark --endpoints={IP_1},{IP_2},{IP_3} --conns=100 --clients=1000 \
+    range YOUR_KEY --consistency=l --total=100000
+
+# Serializable read requests for each member and sum up the numbers
+for endpoint in {IP_1} {IP_2} {IP_3}; do
+    benchmark --endpoints=$endpoint --conns=1 --clients=1 \
+        range YOUR_KEY --consistency=s --total=10000
+done
+for endpoint in {IP_1} {IP_2} {IP_3}; do
+    benchmark --endpoints=$endpoint --conns=100 --clients=1000 \
+        range YOUR_KEY --consistency=s --total=100000
+done
+```
+
+We encourage running the benchmark test when setting up an etcd cluster for the first time in a new environment to ensure the cluster achieves adequate performance; cluster latency and throughput can be sensitive to minor environment differences.

Documentation/op-guide/recovery.md

@@ -0,0 +1,63 @@
+## Disaster recovery
+
+etcd is designed to withstand machine failures. An etcd cluster automatically recovers from temporary failures (e.g., machine reboots) and tolerates up to *(N-1)/2* permanent failures for a cluster of N members. When a member permanently fails, whether due to hardware failure or disk corruption, it loses access to the cluster. If the cluster permanently loses more than *(N-1)/2* members then it disastrously fails, irrevocably losing quorum. Once quorum is lost, the cluster cannot reach consensus and therefore cannot continue accepting updates.
+
+To recover from disastrous failure, etcd v3 provides snapshot and restore facilities to recreate the cluster without v3 key data loss. To recover v2 keys, refer to the [v2 admin guide][v2_recover].
+
+[v2_recover]: ../v2/admin_guide.md#disaster-recovery
+
+### Snapshotting the keyspace
+
+Recovering a cluster first needs a snapshot of the keyspace from an etcd member. A snapshot may either be taken from a live member with the `etcdctl snapshot save` command or by copying the `member/snap/db` file from an etcd data directory. For example, the following command snapshots the keyspace served by `$ENDPOINT` to the file `snapshot.db`:
+
+```sh
+$ etcdctl --endpoints $ENDPOINT snapshot save snapshot.db
+```
+
+### Restoring a cluster
+
+To restore a cluster, all that is needed is a single snapshot "db" file. A cluster restore with `etcdctl snapshot restore` creates new etcd data directories; all members should restore using the same snapshot. Restoring overwrites some snapshot metadata (specifically, the member ID and cluster ID); the member loses its former identity. This metadata overwrite prevents the new member from inadvertently joining an existing cluster. Therefore in order to start a cluster from a snapshot, the restore must start a new logical cluster.
+
+Snapshot integrity may be optionally verified at restore time. If the snapshot is taken with `etcdctl snapshot save`, it will have an integrity hash that is checked by `etcdctl snapshot restore`. If the snapshot is copied from the data directory, there is no integrity hash and it will only restore by using `--skip-hash-check`.
+
+A restore initializes a new member of a new cluster, with a fresh cluster configuration using `etcd`'s cluster configuration flags, but preserves the contents of the etcd keyspace. Continuing from the previous example, the following creates new etcd data directories (`m1.etcd`, `m2.etcd`, `m3.etcd`) for a three member cluster:
+
+```sh
+$ etcdctl snapshot restore snapshot.db \
+  --name m1 \
+  --initial-cluster m1=http:/host1:2380,m2=http://host2:2380,m3=http://host3:2380 \
+  --initial-cluster-token etcd-cluster-1 \
+  --initial-advertise-peer-urls http://host1:2380
+$ etcdctl snapshot restore snapshot.db \
+  --name m2 \
+  --initial-cluster m1=http:/host1:2380,m2=http://host2:2380,m3=http://host3:2380 \
+  --initial-cluster-token etcd-cluster-1 \
+  --initial-advertise-peer-urls http://host2:2380
+$ etcdctl snapshot restore snapshot.db \
+  --name m3 \
+  --initial-cluster m1=http:/host1:2380,m2=http://host2:2380,m3=http://host3:2380 \
+  --initial-cluster-token etcd-cluster-1 \
+  --initial-advertise-peer-urls http://host3:2380
+```
+
+Next, start `etcd` with the new data directories:
+
+```sh
+$ etcd \
+  --name m1 \
+  --listen-client-urls http://host1:2379 \
+  --advertise-client-urls http://host1:2379 \
+  --listen-peer-urls http://host1:2380 &
+$ etcd \
+  --name m2 \
+  --listen-client-urls http://host2:2379 \
+  --advertise-client-urls http://host2:2379 \
+  --listen-peer-urls http://host2:2380 &
+$ etcd \
+  --name m3 \
+  --listen-client-urls http://host3:2379 \
+  --advertise-client-urls http://host3:2379 \
+  --listen-peer-urls http://host3:2380 &
+```
+
+Now the restored etcd cluster should be available and serving the keyspace given by the snapshot.