f-stack/freebsd/arm/allwinner/axp209reg.h

161 lines
5.2 KiB
C

/*-
* Copyright (c) 2016 Emmanuel Vadot <manu@freeebsd.org>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* $FreeBSD$
*/
#ifndef _AXP209REG_H_
#define _AXP209REG_H_
/* Power State Register */
#define AXP209_PSR 0x00
#define AXP209_PSR_ACIN 0x80
#define AXP209_PSR_ACIN_SHIFT 7
#define AXP209_PSR_VBUS 0x20
#define AXP209_PSR_VBUS_SHIFT 5
/* Shutdown and battery control */
#define AXP209_SHUTBAT 0x32
#define AXP209_SHUTBAT_SHUTDOWN 0x80
/* Voltage/Current Monitor */
#define AXP209_ACIN_VOLTAGE 0x56
#define AXP209_ACIN_CURRENT 0x58
#define AXP209_VBUS_VOLTAGE 0x5A
#define AXP209_VBUS_CURRENT 0x5C
#define AXP209_BAT_VOLTAGE 0x78
#define AXP209_BAT_CHARGE_CURRENT 0x7A
#define AXP209_BAT_DISCHARGE_CURRENT 0x7C
#define AXP209_VOLT_STEP 1700
#define AXP209_BATVOLT_STEP 1100
#define AXP209_ACCURRENT_STEP 625
#define AXP209_VBUSCURRENT_STEP 375
#define AXP209_BATCURRENT_STEP 500
/* Temperature monitor */
#define AXP209_TEMPMON 0x5e
#define AXP209_TEMPMON_MIN 1447 /* -144.7C */
/* Sensors conversion macros */
#define AXP209_SENSOR_H(a) ((a) << 4)
#define AXP209_SENSOR_L(a) ((a) & 0xf)
#define AXP209_SENSOR_BAT_H(a) ((a) << 5)
#define AXP209_SENSOR_BAT_L(a) ((a) & 0x1f)
#define AXP209_0C_TO_K 2732
/* ADC Sensors */
#define AXP209_ADC_ENABLE1 0x82
#define AXP209_ADC_ENABLE2 0x83
#define AXP209_ADC1_BATVOLT (1 << 7)
#define AXP209_ADC1_BATCURRENT (1 << 6)
#define AXP209_ADC1_ACVOLT (1 << 5)
#define AXP209_ADC1_ACCURRENT (1 << 4)
#define AXP209_ADC1_VBUSVOLT (1 << 3)
#define AXP209_ADC1_VBUSCURRENT (1 << 2)
/* Interrupt related registers */
#define AXP209_IRQ1_ENABLE 0x40
#define AXP209_IRQ1_STATUS 0x48
#define AXP209_IRQ1_AC_OVERVOLT (1 << 7)
#define AXP209_IRQ1_AC_CONN (1 << 6)
#define AXP209_IRQ1_AC_DISCONN (1 << 5)
#define AXP209_IRQ1_VBUS_OVERVOLT (1 << 4)
#define AXP209_IRQ1_VBUS_CONN (1 << 3)
#define AXP209_IRQ1_VBUS_DISCONN (1 << 2)
#define AXP209_IRQ1_VBUS_LOW (1 << 1)
#define AXP209_IRQ2_ENABLE 0x41
#define AXP209_IRQ2_STATUS 0x49
#define AXP209_IRQ2_BATT_CONN (1 << 7)
#define AXP209_IRQ2_BATT_DISCONN (1 << 6)
#define AXP209_IRQ2_BATT_CHARGE_ACCT_ON (1 << 5)
#define AXP209_IRQ2_BATT_CHARGE_ACCT_OFF (1 << 4)
#define AXP209_IRQ2_BATT_CHARGING (1 << 3)
#define AXP209_IRQ2_BATT_CHARGED (1 << 2)
#define AXP209_IRQ2_BATT_TEMP_OVER (1 << 1)
#define AXP209_IRQ2_BATT_TEMP_LOW (1 << 0)
#define AXP209_IRQ3_ENABLE 0x42
#define AXP209_IRQ3_STATUS 0x4A
#define AXP209_IRQ3_TEMP_OVER (1 << 7)
#define AXP209_IRQ3_CHARGE_CURRENT_LOW (1 << 6)
#define AXP209_IRQ3_DCDC2_LOW (1 << 4)
#define AXP209_IRQ3_DCDC3_LOW (1 << 3)
#define AXP209_IRQ3_LDO3_LOW (1 << 2)
#define AXP209_IRQ3_PEK_SHORT (1 << 1)
#define AXP209_IRQ3_PEK_LONG (1 << 0)
#define AXP209_IRQ4_ENABLE 0x43
#define AXP209_IRQ4_STATUS 0x4B
#define AXP209_IRQ4_NOE_START (1 << 7)
#define AXP209_IRQ4_NOE_SHUT (1 << 6)
#define AXP209_IRQ4_VBUS_VALID (1 << 5)
#define AXP209_IRQ4_VBUS_INVALID (1 << 4)
#define AXP209_IRQ4_VBUS_SESSION (1 << 3)
#define AXP209_IRQ4_VBUS_SESSION_END (1 << 2)
#define AXP209_IRQ4_APS_LOW_1 (1 << 1)
#define AXP209_IRQ4_APS_LOW_2 (1 << 0)
#define AXP209_IRQ5_ENABLE 0x44
#define AXP209_IRQ5_STATUS 0x4C
#define AXP209_IRQ5_TIMER_EXPIRE (1 << 7)
#define AXP209_IRQ5_PEK_RISE_EDGE (1 << 6)
#define AXP209_IRQ5_PEK_FALL_EDGE (1 << 5)
#define AXP209_IRQ5_GPIO3 (1 << 3)
#define AXP209_IRQ5_GPIO2 (1 << 2)
#define AXP209_IRQ5_GPIO1 (1 << 1)
#define AXP209_IRQ5_GPIO0 (1 << 0)
#define AXP209_IRQ_ACK 0xff
/* GPIOs registers */
#define AXP209_GPIO_FUNC_MASK 0x7
#define AXP209_GPIO_FUNC_DRVLO 0x0
#define AXP209_GPIO_FUNC_DRVHI 0x1
#define AXP209_GPIO_FUNC_INPUT 0x2
#define AXP209_GPIO0_CTRL 0x90
#define AXP209_GPIO1_CTRL 0x92
#define AXP209_GPIO2_CTRL 0x93
#define AXP209_GPIO_STATUS 0x94
#define AXP209_GPIO_DATA(x) (1 << (x + 4))
enum axp209_sensor {
AXP209_TEMP,
AXP209_ACVOLT,
AXP209_ACCURRENT,
AXP209_VBUSVOLT,
AXP209_VBUSCURRENT,
AXP209_BATVOLT,
AXP209_BATCHARGECURRENT,
AXP209_BATDISCHARGECURRENT,
};
#endif /* _AXP209REG_H_ */