f-stack/freebsd/contrib/octeon-sdk/cvmx-helper-npi.c

180 lines
5.7 KiB
C

/***********************license start***************
* Copyright (c) 2003-2010 Cavium Inc. (support@cavium.com). All rights
* reserved.
*
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are
* met:
*
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
*
* * Redistributions in binary form must reproduce the above
* copyright notice, this list of conditions and the following
* disclaimer in the documentation and/or other materials provided
* with the distribution.
* * Neither the name of Cavium Inc. nor the names of
* its contributors may be used to endorse or promote products
* derived from this software without specific prior written
* permission.
* This Software, including technical data, may be subject to U.S. export control
* laws, including the U.S. Export Administration Act and its associated
* regulations, and may be subject to export or import regulations in other
* countries.
* TO THE MAXIMUM EXTENT PERMITTED BY LAW, THE SOFTWARE IS PROVIDED "AS IS"
* AND WITH ALL FAULTS AND CAVIUM INC. MAKES NO PROMISES, REPRESENTATIONS OR
* WARRANTIES, EITHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, WITH RESPECT TO
* THE SOFTWARE, INCLUDING ITS CONDITION, ITS CONFORMITY TO ANY REPRESENTATION OR
* DESCRIPTION, OR THE EXISTENCE OF ANY LATENT OR PATENT DEFECTS, AND CAVIUM
* SPECIFICALLY DISCLAIMS ALL IMPLIED (IF ANY) WARRANTIES OF TITLE,
* MERCHANTABILITY, NONINFRINGEMENT, FITNESS FOR A PARTICULAR PURPOSE, LACK OF
* VIRUSES, ACCURACY OR COMPLETENESS, QUIET ENJOYMENT, QUIET POSSESSION OR
* CORRESPONDENCE TO DESCRIPTION. THE ENTIRE RISK ARISING OUT OF USE OR
* PERFORMANCE OF THE SOFTWARE LIES WITH YOU.
***********************license end**************************************/
/**
* @file
*
* Functions for NPI initialization, configuration,
* and monitoring.
*
* <hr>$Revision: 70030 $<hr>
*/
#ifdef CVMX_BUILD_FOR_LINUX_KERNEL
#include <asm/octeon/cvmx.h>
#include <asm/octeon/cvmx-config.h>
#ifdef CVMX_ENABLE_PKO_FUNCTIONS
#include <asm/octeon/cvmx-helper.h>
#include <asm/octeon/cvmx-pko.h>
#include <asm/octeon/cvmx-pexp-defs.h>
#include <asm/octeon/cvmx-sli-defs.h>
#endif
#include <asm/octeon/cvmx-pip-defs.h>
#else
#if !defined(__FreeBSD__) || !defined(_KERNEL)
#include "executive-config.h"
#include "cvmx-config.h"
#include "cvmx.h"
#include "cvmx-pko.h"
#ifdef CVMX_ENABLE_PKO_FUNCTIONS
#include "cvmx-helper.h"
#endif
#else
#include "cvmx.h"
#include "cvmx-pko.h"
#include "cvmx-helper.h"
#endif
#endif
#ifdef CVMX_ENABLE_PKO_FUNCTIONS
/**
* @INTERNAL
* Probe a NPI interface and determine the number of ports
* connected to it. The NPI interface should still be down
* after this call.
*
* @param interface Interface to probe
*
* @return Number of ports on the interface. Zero to disable.
*/
int __cvmx_helper_npi_probe(int interface)
{
#if CVMX_PKO_QUEUES_PER_PORT_PCI > 0
if (OCTEON_IS_MODEL(OCTEON_CN68XX))
return 32;
#if 0
/* Technically CN30XX, CN31XX, and CN50XX contain packet engines, but
nobody ever uses them. Since this is the case, we disable them here */
else if (OCTEON_IS_MODEL(OCTEON_CN31XX) || OCTEON_IS_MODEL(OCTEON_CN50XX))
return 2;
else if (OCTEON_IS_MODEL(OCTEON_CN30XX))
return 1;
#endif
else if (!(OCTEON_IS_MODEL(OCTEON_CN52XX_PASS1_X) || OCTEON_IS_MODEL(OCTEON_CN56XX_PASS1_X) || OCTEON_IS_MODEL(OCTEON_CN31XX) || OCTEON_IS_MODEL(OCTEON_CN50XX) || OCTEON_IS_MODEL(OCTEON_CN30XX)))
return 4; /* The packet engines didn't exist before cn56xx pass 2 */
#endif
return 0;
}
/**
* @INTERNAL
* Bringup and enable a NPI interface. After this call packet
* I/O should be fully functional. This is called with IPD
* enabled but PKO disabled.
*
* @param interface Interface to bring up
*
* @return Zero on success, negative on failure
*/
int __cvmx_helper_npi_enable(int interface)
{
int num_ports = cvmx_helper_ports_on_interface(interface);
/* On CN50XX, CN52XX, and CN56XX we need to disable length checking
so packet < 64 bytes and jumbo frames don't get errors */
if (!OCTEON_IS_MODEL(OCTEON_CN3XXX) && !OCTEON_IS_MODEL(OCTEON_CN58XX))
{
int port;
for (port=0; port<num_ports; port++)
{
cvmx_pip_prt_cfgx_t port_cfg;
int ipd_port = (OCTEON_IS_MODEL(OCTEON_CN68XX)) ?
cvmx_helper_get_pknd(interface, port) :
cvmx_helper_get_ipd_port(interface, port);
port_cfg.u64 = cvmx_read_csr(CVMX_PIP_PRT_CFGX(ipd_port));
port_cfg.s.lenerr_en = 0;
port_cfg.s.maxerr_en = 0;
port_cfg.s.minerr_en = 0;
cvmx_write_csr(CVMX_PIP_PRT_CFGX(ipd_port), port_cfg.u64);
if (OCTEON_IS_MODEL(OCTEON_CN68XX))
{
/*
* Set up pknd and bpid
*/
cvmx_sli_portx_pkind_t config;
config.u64 = cvmx_read_csr(CVMX_PEXP_SLI_PORTX_PKIND(port));
config.s.bpkind = cvmx_helper_get_bpid(interface, port);
config.s.pkind = cvmx_helper_get_pknd(interface, port);
cvmx_write_csr(CVMX_PEXP_SLI_PORTX_PKIND(port), config.u64);
}
}
}
if (OCTEON_IS_MODEL(OCTEON_CN68XX))
{
/*
* Set up pko pipes.
*/
cvmx_sli_tx_pipe_t config;
config.u64 = cvmx_read_csr(CVMX_PEXP_SLI_TX_PIPE);
config.s.base = __cvmx_pko_get_pipe (interface, 0);
#ifdef CVMX_HELPER_NPI_MAX_PIPES
config.s.nump = CVMX_HELPER_NPI_MAX_PIPES;
#else
config.s.nump = num_ports;
#endif
cvmx_write_csr(CVMX_PEXP_SLI_TX_PIPE, config.u64);
}
/* Enables are controlled by the remote host, so nothing to do here */
return 0;
}
#endif /* CVMX_ENABLE_PKO_FUNCTIONS */