vitalif
/
f-stack
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
f-stack/freebsd/contrib/octeon-sdk/cvmx-helper-spi.c

278 lines
8.4 KiB
C
Raw Permalink Blame History

/***********************license start***************
* Copyright (c) 2003-2010 Cavium Inc. (support@cavium.com). All rights
* reserved.
*
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are
* met:
*
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
*
* * Redistributions in binary form must reproduce the above
* copyright notice, this list of conditions and the following
* disclaimer in the documentation and/or other materials provided
* with the distribution.
* * Neither the name of Cavium Inc. nor the names of
* its contributors may be used to endorse or promote products
* derived from this software without specific prior written
* permission.
* This Software, including technical data, may be subject to U.S. export control
* laws, including the U.S. Export Administration Act and its associated
* regulations, and may be subject to export or import regulations in other
* countries.
* TO THE MAXIMUM EXTENT PERMITTED BY LAW, THE SOFTWARE IS PROVIDED "AS IS"
* AND WITH ALL FAULTS AND CAVIUM INC. MAKES NO PROMISES, REPRESENTATIONS OR
* WARRANTIES, EITHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, WITH RESPECT TO
* THE SOFTWARE, INCLUDING ITS CONDITION, ITS CONFORMITY TO ANY REPRESENTATION OR
* DESCRIPTION, OR THE EXISTENCE OF ANY LATENT OR PATENT DEFECTS, AND CAVIUM
* SPECIFICALLY DISCLAIMS ALL IMPLIED (IF ANY) WARRANTIES OF TITLE,
* MERCHANTABILITY, NONINFRINGEMENT, FITNESS FOR A PARTICULAR PURPOSE, LACK OF
* VIRUSES, ACCURACY OR COMPLETENESS, QUIET ENJOYMENT, QUIET POSSESSION OR
* CORRESPONDENCE TO DESCRIPTION. THE ENTIRE RISK ARISING OUT OF USE OR
* PERFORMANCE OF THE SOFTWARE LIES WITH YOU.
***********************license end**************************************/
/**
* @file
*
* Functions for SPI initialization, configuration,
* and monitoring.
*
* <hr>$Revision: 70030 $<hr>
*/
#ifdef CVMX_BUILD_FOR_LINUX_KERNEL
#include <asm/octeon/cvmx.h>
#include <asm/octeon/cvmx-config.h>
#ifdef CVMX_ENABLE_PKO_FUNCTIONS
#include <asm/octeon/cvmx-spi.h>
#include <asm/octeon/cvmx-helper.h>
#endif
#include <asm/octeon/cvmx-pko-defs.h>
#include <asm/octeon/cvmx-pip-defs.h>
#else
#if !defined(__FreeBSD__) || !defined(_KERNEL)
#include "executive-config.h"
#include "cvmx-config.h"
#ifdef CVMX_ENABLE_PKO_FUNCTIONS
#include "cvmx.h"
#include "cvmx-spi.h"
#include "cvmx-sysinfo.h"
#include "cvmx-helper.h"
#endif
#else
#include "cvmx.h"
#include "cvmx-spi.h"
#include "cvmx-sysinfo.h"
#include "cvmx-helper.h"
#endif
#endif
#ifdef CVMX_ENABLE_PKO_FUNCTIONS
/* CVMX_HELPER_SPI_TIMEOUT is used to determine how long the SPI initialization
routines wait for SPI training. You can override the value using
executive-config.h if necessary */
#ifndef CVMX_HELPER_SPI_TIMEOUT
#define CVMX_HELPER_SPI_TIMEOUT 10
#endif
int __cvmx_helper_spi_enumerate(int interface)
{
#if defined(OCTEON_VENDOR_LANNER)
if (cvmx_sysinfo_get()->board_type == CVMX_BOARD_TYPE_CUST_LANNER_MR955)
{
cvmx_pko_reg_crc_enable_t enable;
enable.u64 = cvmx_read_csr(CVMX_PKO_REG_CRC_ENABLE);
enable.s.enable &= 0xffff << (16 - (interface*16));
cvmx_write_csr(CVMX_PKO_REG_CRC_ENABLE, enable.u64);
if (interface == 1)
return 12;
/* XXX This is not entirely true. */
return 0;
}
#endif
#if defined(OCTEON_VENDOR_RADISYS)
if (cvmx_sysinfo_get()->board_type == CVMX_BOARD_TYPE_CUST_RADISYS_RSYS4GBE) {
if (interface == 0)
return 13;
if (interface == 1)
return 8;
return 0;
}
#endif
if ((cvmx_sysinfo_get()->board_type != CVMX_BOARD_TYPE_SIM) &&
cvmx_spi4000_is_present(interface))
return 10;
else
return 16;
}
/**
* @INTERNAL
* Probe a SPI interface and determine the number of ports
* connected to it. The SPI interface should still be down after
* this call.
*
* @param interface Interface to probe
*
* @return Number of ports on the interface. Zero to disable.
*/
int __cvmx_helper_spi_probe(int interface)
{
int num_ports = __cvmx_helper_spi_enumerate(interface);
if (num_ports == 16) {
cvmx_pko_reg_crc_enable_t enable;
/*
* Unlike the SPI4000, most SPI devices don't
* automatically put on the L2 CRC. For everything
* except for the SPI4000 have PKO append the L2 CRC
* to the packet
*/
enable.u64 = cvmx_read_csr(CVMX_PKO_REG_CRC_ENABLE);
enable.s.enable |= 0xffff << (interface*16);
cvmx_write_csr(CVMX_PKO_REG_CRC_ENABLE, enable.u64);
}
__cvmx_helper_setup_gmx(interface, num_ports);
return num_ports;
}
/**
* @INTERNAL
* Bringup and enable a SPI interface. After this call packet I/O
* should be fully functional. This is called with IPD enabled but
* PKO disabled.
*
* @param interface Interface to bring up
*
* @return Zero on success, negative on failure
*/
int __cvmx_helper_spi_enable(int interface)
{
/* Normally the ethernet L2 CRC is checked and stripped in the GMX block.
When you are using SPI, this isn' the case and IPD needs to check
the L2 CRC */
int num_ports = cvmx_helper_ports_on_interface(interface);
int ipd_port;
for (ipd_port=interface*16; ipd_port<interface*16+num_ports; ipd_port++)
{
cvmx_pip_prt_cfgx_t port_config;
port_config.u64 = cvmx_read_csr(CVMX_PIP_PRT_CFGX(ipd_port));
port_config.s.crc_en = 1;
#ifdef OCTEON_VENDOR_RADISYS
/*
* Incoming packets on the RSYS4GBE have the FCS stripped.
*/
if (cvmx_sysinfo_get()->board_type == CVMX_BOARD_TYPE_CUST_RADISYS_RSYS4GBE)
port_config.s.crc_en = 0;
#endif
cvmx_write_csr(CVMX_PIP_PRT_CFGX(ipd_port), port_config.u64);
}
if (cvmx_sysinfo_get()->board_type != CVMX_BOARD_TYPE_SIM)
{
cvmx_spi_start_interface(interface, CVMX_SPI_MODE_DUPLEX, CVMX_HELPER_SPI_TIMEOUT, num_ports);
if (cvmx_spi4000_is_present(interface))
cvmx_spi4000_initialize(interface);
}
return 0;
}
/**
* @INTERNAL
* Return the link state of an IPD/PKO port as returned by
* auto negotiation. The result of this function may not match
* Octeon's link config if auto negotiation has changed since
* the last call to cvmx_helper_link_set().
*
* @param ipd_port IPD/PKO port to query
*
* @return Link state
*/
cvmx_helper_link_info_t __cvmx_helper_spi_link_get(int ipd_port)
{
cvmx_helper_link_info_t result;
int interface = cvmx_helper_get_interface_num(ipd_port);
int index = cvmx_helper_get_interface_index_num(ipd_port);
result.u64 = 0;
if (cvmx_sysinfo_get()->board_type == CVMX_BOARD_TYPE_SIM)
{
/* The simulator gives you a simulated full duplex link */
result.s.link_up = 1;
result.s.full_duplex = 1;
result.s.speed = 10000;
}
else if (cvmx_spi4000_is_present(interface))
{
cvmx_gmxx_rxx_rx_inbnd_t inband = cvmx_spi4000_check_speed(interface, index);
result.s.link_up = inband.s.status;
result.s.full_duplex = inband.s.duplex;
switch (inband.s.speed)
{
case 0: /* 10 Mbps */
result.s.speed = 10;
break;
case 1: /* 100 Mbps */
result.s.speed = 100;
break;
case 2: /* 1 Gbps */
result.s.speed = 1000;
break;
case 3: /* Illegal */
result.s.speed = 0;
result.s.link_up = 0;
break;
}
}
else
{
/* For generic SPI we can't determine the link, just return some
sane results */
result.s.link_up = 1;
result.s.full_duplex = 1;
result.s.speed = 10000;
}
return result;
}
/**
* @INTERNAL
* Configure an IPD/PKO port for the specified link state. This
* function does not influence auto negotiation at the PHY level.
* The passed link state must always match the link state returned
* by cvmx_helper_link_get(). It is normally best to use
* cvmx_helper_link_autoconf() instead.
*
* @param ipd_port IPD/PKO port to configure
* @param link_info The new link state
*
* @return Zero on success, negative on failure
*/
int __cvmx_helper_spi_link_set(int ipd_port, cvmx_helper_link_info_t link_info)
{
/* Nothing to do. If we have a SPI4000 then the setup was already performed
by cvmx_spi4000_check_speed(). If not then there isn't any link
info */
return 0;
}
#endif /* CVMX_ENABLE_PKO_FUNCTIONS */
Reference in New Issue View Git Blame Copy Permalink