f-stack/freebsd/arm/allwinner/a10_mmc.h

200 lines
7.8 KiB
C

/*-
* Copyright (c) 2013 Alexander Fedorov <alexander.fedorov@rtlservice.com>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $FreeBSD$
*/
#ifndef _A10_MMC_H_
#define _A10_MMC_H_
#define A10_MMC_GCTRL 0x00 /* Global Control Register */
#define A10_MMC_CLKCR 0x04 /* Clock Control Register */
#define A10_MMC_TIMEOUT 0x08 /* Timeout Register */
#define A10_MMC_WIDTH 0x0C /* Bus Width Register */
#define A10_MMC_BLKSZ 0x10 /* Block Size Register */
#define A10_MMC_BCNTR 0x14 /* Byte Count Register */
#define A10_MMC_CMDR 0x18 /* Command Register */
#define A10_MMC_CARG 0x1C /* Argument Register */
#define A10_MMC_RESP0 0x20 /* Response Register 0 */
#define A10_MMC_RESP1 0x24 /* Response Register 1 */
#define A10_MMC_RESP2 0x28 /* Response Register 2 */
#define A10_MMC_RESP3 0x2C /* Response Register 3 */
#define A10_MMC_IMASK 0x30 /* Interrupt Mask Register */
#define A10_MMC_MISTA 0x34 /* Masked Interrupt Status Register */
#define A10_MMC_RINTR 0x38 /* Raw Interrupt Status Register */
#define A10_MMC_STAS 0x3C /* Status Register */
#define A10_MMC_FTRGL 0x40 /* FIFO Threshold Watermark Register */
#define A10_MMC_FUNS 0x44 /* Function Select Register */
#define A10_MMC_CBCR 0x48 /* CIU Byte Count Register */
#define A10_MMC_BBCR 0x4C /* BIU Byte Count Register */
#define A10_MMC_DBGC 0x50 /* Debug Enable Register */
#define A10_MMC_DMAC 0x80 /* IDMAC Control Register */
#define A10_MMC_DLBA 0x84 /* IDMAC Desc List Base Address Reg */
#define A10_MMC_IDST 0x88 /* IDMAC Status Register */
#define A10_MMC_IDIE 0x8C /* IDMAC Interrupt Enable Register */
#define A10_MMC_CHDA 0x90
#define A10_MMC_CBDA 0x94
#define A10_MMC_FIFO 0x100 /* FIFO Access Address (A10/A20) */
#define A31_MMC_FIFO 0x200 /* FIFO Access Address (A31) */
/* A10_MMC_GCTRL */
#define A10_MMC_SOFT_RESET (1U << 0)
#define A10_MMC_FIFO_RESET (1U << 1)
#define A10_MMC_DMA_RESET (1U << 2)
#define A10_MMC_INT_ENABLE (1U << 4)
#define A10_MMC_DMA_ENABLE (1U << 5)
#define A10_MMC_DEBOUNCE_ENABLE (1U << 8)
#define A10_MMC_DDR_MODE (1U << 10)
#define A10_MMC_ACCESS_BY_AHB (1U << 31)
#define A10_MMC_RESET \
(A10_MMC_SOFT_RESET | A10_MMC_FIFO_RESET | A10_MMC_DMA_RESET)
/* A10_MMC_CLKCR */
#define A10_MMC_CARD_CLK_ON (1U << 16)
#define A10_MMC_LOW_POWER_ON (1U << 17)
#define A10_MMC_CLKCR_DIV 0xff
/* A10_MMC_WIDTH */
#define A10_MMC_WIDTH1 0
#define A10_MMC_WIDTH4 1
#define A10_MMC_WIDTH8 2
/* A10_MMC_CMDR */
#define A10_MMC_RESP_EXP (1U << 6)
#define A10_MMC_LONG_RESP (1U << 7)
#define A10_MMC_CHECK_RESP_CRC (1U << 8)
#define A10_MMC_DATA_EXP (1U << 9)
#define A10_MMC_WRITE (1U << 10)
#define A10_MMC_SEQ_MODE (1U << 11)
#define A10_MMC_SEND_AUTOSTOP (1U << 12)
#define A10_MMC_WAIT_PREOVER (1U << 13)
#define A10_MMC_STOP_ABORT_CMD (1U << 14)
#define A10_MMC_SEND_INIT_SEQ (1U << 15)
#define A10_MMC_UPCLK_ONLY (1U << 21)
#define A10_MMC_RDCEATADEV (1U << 22)
#define A10_MMC_CCS_EXP (1U << 23)
#define A10_MMC_ENB_BOOT (1U << 24)
#define A10_MMC_ALT_BOOT_OPT (1U << 25)
#define A10_MMC_BOOT_ACK_EXP (1U << 26)
#define A10_MMC_DISABLE_BOOT (1U << 27)
#define A10_MMC_VOL_SWITCH (1U << 28)
#define A10_MMC_START (1U << 31)
/* A10_MMC_IMASK and A10_MMC_RINTR */
#define A10_MMC_RESP_ERR (1U << 1)
#define A10_MMC_CMD_DONE (1U << 2)
#define A10_MMC_DATA_OVER (1U << 3)
#define A10_MMC_TX_DATA_REQ (1U << 4)
#define A10_MMC_RX_DATA_REQ (1U << 5)
#define A10_MMC_RESP_CRC_ERR (1U << 6)
#define A10_MMC_DATA_CRC_ERR (1U << 7)
#define A10_MMC_RESP_TIMEOUT (1U << 8)
#define A10_MMC_ACK_RECV (1U << 8)
#define A10_MMC_DATA_TIMEOUT (1U << 9)
#define A10_MMC_BOOT_START (1U << 9)
#define A10_MMC_DATA_STARVE (1U << 10)
#define A10_MMC_VOL_CHG_DONE (1U << 10)
#define A10_MMC_FIFO_RUN_ERR (1U << 11)
#define A10_MMC_HARDW_LOCKED (1U << 12)
#define A10_MMC_START_BIT_ERR (1U << 13)
#define A10_MMC_AUTOCMD_DONE (1U << 14)
#define A10_MMC_END_BIT_ERR (1U << 15)
#define A10_MMC_SDIO_INT (1U << 16)
#define A10_MMC_CARD_INSERT (1U << 30)
#define A10_MMC_CARD_REMOVE (1U << 31)
#define A10_MMC_INT_ERR_BIT \
(A10_MMC_RESP_ERR | A10_MMC_RESP_CRC_ERR | \
A10_MMC_DATA_CRC_ERR | A10_MMC_RESP_TIMEOUT | \
A10_MMC_FIFO_RUN_ERR | A10_MMC_HARDW_LOCKED | \
A10_MMC_START_BIT_ERR | A10_MMC_END_BIT_ERR)
/* A10_MMC_STAS */
#define A10_MMC_RX_WLFLAG (1U << 0)
#define A10_MMC_TX_WLFLAG (1U << 1)
#define A10_MMC_FIFO_EMPTY (1U << 2)
#define A10_MMC_FIFO_FULL (1U << 3)
#define A10_MMC_CARD_PRESENT (1U << 8)
#define A10_MMC_CARD_DATA_BUSY (1U << 9)
#define A10_MMC_DATA_FSM_BUSY (1U << 10)
#define A10_MMC_DMA_REQ (1U << 31)
#define A10_MMC_FIFO_SIZE 16
/* A10_MMC_FUNS */
#define A10_MMC_CE_ATA_ON (0xceaaU << 16)
#define A10_MMC_SEND_IRQ_RESP (1U << 0)
#define A10_MMC_SDIO_RD_WAIT (1U << 1)
#define A10_MMC_ABT_RD_DATA (1U << 2)
#define A10_MMC_SEND_CC_SD (1U << 8)
#define A10_MMC_SEND_AUTOSTOP_CC_SD (1U << 9)
#define A10_MMC_CE_ATA_DEV_INT_ENB (1U << 10)
/* IDMA CONTROLLER BUS MOD BIT FIELD */
#define A10_MMC_IDMAC_SOFT_RST (1U << 0)
#define A10_MMC_IDMAC_FIX_BURST (1U << 1)
#define A10_MMC_IDMAC_IDMA_ON (1U << 7)
#define A10_MMC_IDMAC_REFETCH_DES (1U << 31)
/* A10_MMC_IDST */
#define A10_MMC_IDMAC_TRANSMIT_INT (1U << 0)
#define A10_MMC_IDMAC_RECEIVE_INT (1U << 1)
#define A10_MMC_IDMAC_FATAL_BUS_ERR (1U << 2)
#define A10_MMC_IDMAC_DES_INVALID (1U << 4)
#define A10_MMC_IDMAC_CARD_ERR_SUM (1U << 5)
#define A10_MMC_IDMAC_NORMAL_INT_SUM (1U << 8)
#define A10_MMC_IDMAC_ABNORMAL_INT_SUM (1U << 9)
#define A10_MMC_IDMAC_HOST_ABT_INTX (1U << 10)
#define A10_MMC_IDMAC_HOST_ABT_INRX (1U << 10)
#define A10_MMC_IDMAC_IDLE (0U << 13)
#define A10_MMC_IDMAC_SUSPEND (1U << 13)
#define A10_MMC_IDMAC_DESC_RD (2U << 13)
#define A10_MMC_IDMAC_DESC_CHECK (3U << 13)
#define A10_MMC_IDMAC_RD_REQ_WAIT (4U << 13)
#define A10_MMC_IDMAC_WR_REQ_WAIT (5U << 13)
#define A10_MMC_IDMAC_RD (6U << 13)
#define A10_MMC_IDMAC_WR (7U << 13)
#define A10_MMC_IDMAC_DESC_CLOSE (8U << 13)
#define A10_MMC_IDMAC_ERROR \
(A10_MMC_IDMAC_FATAL_BUS_ERR | A10_MMC_IDMAC_CARD_ERR_SUM | \
A10_MMC_IDMAC_DES_INVALID | A10_MMC_IDMAC_ABNORMAL_INT_SUM)
#define A10_MMC_IDMAC_COMPLETE \
(A10_MMC_IDMAC_TRANSMIT_INT | A10_MMC_IDMAC_RECEIVE_INT)
/* The DMA descriptor table. */
struct a10_mmc_dma_desc {
uint32_t config;
#define A10_MMC_DMA_CONFIG_DIC (1U << 1)
#define A10_MMC_DMA_CONFIG_LD (1U << 2)
#define A10_MMC_DMA_CONFIG_FD (1U << 3)
#define A10_MMC_DMA_CONFIG_CH (1U << 4)
#define A10_MMC_DMA_CONFIG_ER (1U << 5)
#define A10_MMC_DMA_CONFIG_CES (1U << 30)
#define A10_MMC_DMA_CONFIG_OWN (1U << 31)
uint32_t buf_size;
uint32_t buf_addr;
uint32_t next;
};
#endif /* _A10_MMC_H_ */