590 lines
22 KiB
C
590 lines
22 KiB
C
/***********************license start***************
|
|
* Copyright (c) 2003-2010 Cavium Inc. (support@cavium.com). All rights
|
|
* reserved.
|
|
*
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions are
|
|
* met:
|
|
*
|
|
* * Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
*
|
|
* * Redistributions in binary form must reproduce the above
|
|
* copyright notice, this list of conditions and the following
|
|
* disclaimer in the documentation and/or other materials provided
|
|
* with the distribution.
|
|
|
|
* * Neither the name of Cavium Inc. nor the names of
|
|
* its contributors may be used to endorse or promote products
|
|
* derived from this software without specific prior written
|
|
* permission.
|
|
|
|
* This Software, including technical data, may be subject to U.S. export control
|
|
* laws, including the U.S. Export Administration Act and its associated
|
|
* regulations, and may be subject to export or import regulations in other
|
|
* countries.
|
|
|
|
* TO THE MAXIMUM EXTENT PERMITTED BY LAW, THE SOFTWARE IS PROVIDED "AS IS"
|
|
* AND WITH ALL FAULTS AND CAVIUM INC. MAKES NO PROMISES, REPRESENTATIONS OR
|
|
* WARRANTIES, EITHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, WITH RESPECT TO
|
|
* THE SOFTWARE, INCLUDING ITS CONDITION, ITS CONFORMITY TO ANY REPRESENTATION OR
|
|
* DESCRIPTION, OR THE EXISTENCE OF ANY LATENT OR PATENT DEFECTS, AND CAVIUM
|
|
* SPECIFICALLY DISCLAIMS ALL IMPLIED (IF ANY) WARRANTIES OF TITLE,
|
|
* MERCHANTABILITY, NONINFRINGEMENT, FITNESS FOR A PARTICULAR PURPOSE, LACK OF
|
|
* VIRUSES, ACCURACY OR COMPLETENESS, QUIET ENJOYMENT, QUIET POSSESSION OR
|
|
* CORRESPONDENCE TO DESCRIPTION. THE ENTIRE RISK ARISING OUT OF USE OR
|
|
* PERFORMANCE OF THE SOFTWARE LIES WITH YOU.
|
|
***********************license end**************************************/
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
#include <stdio.h>
|
|
#include <stdint.h>
|
|
#include <stdlib.h>
|
|
#include <string.h>
|
|
#include "executive-config.h"
|
|
#include "cvmx-config.h"
|
|
#include "cvmx.h"
|
|
#include "cvmx-spinlock.h"
|
|
#include <octeon-app-init.h>
|
|
#include "cvmx-sysinfo.h"
|
|
#include "cvmx-bootmem.h"
|
|
#include "cvmx-uart.h"
|
|
#include "cvmx-coremask.h"
|
|
#include "cvmx-core.h"
|
|
#include "cvmx-interrupt.h"
|
|
#include "cvmx-ebt3000.h"
|
|
#include "cvmx-sim-magic.h"
|
|
#include "cvmx-debug.h"
|
|
#include "cvmx-qlm.h"
|
|
#include "cvmx-scratch.h"
|
|
#include "cvmx-helper-cfg.h"
|
|
#include "cvmx-helper-jtag.h"
|
|
#include <octeon_mem_map.h>
|
|
#include "libfdt.h"
|
|
int cvmx_debug_uart = -1;
|
|
|
|
/**
|
|
* @file
|
|
*
|
|
* Main entry point for all simple executive based programs.
|
|
*/
|
|
|
|
|
|
extern void cvmx_interrupt_initialize(void);
|
|
|
|
|
|
|
|
/**
|
|
* Main entry point for all simple executive based programs.
|
|
* This is the first C function called. It completes
|
|
* initialization, calls main, and performs C level cleanup.
|
|
*
|
|
* @param app_desc_addr
|
|
* Address of the application description structure passed
|
|
* brom the boot loader.
|
|
*/
|
|
EXTERN_ASM void __cvmx_app_init(uint64_t app_desc_addr);
|
|
|
|
|
|
/**
|
|
* Set up sysinfo structure from boot descriptor versions 6 and higher.
|
|
* In these versions, the interesting data in not in the boot info structure
|
|
* defined by the toolchain, but is in the cvmx_bootinfo structure defined in
|
|
* the simple exec.
|
|
*
|
|
* @param app_desc_ptr
|
|
* pointer to boot descriptor block
|
|
*
|
|
* @param sys_info_ptr
|
|
* pointer to sysinfo structure to fill in
|
|
*/
|
|
static void process_boot_desc_ver_6(octeon_boot_descriptor_t *app_desc_ptr, cvmx_sysinfo_t *sys_info_ptr)
|
|
{
|
|
cvmx_bootinfo_t *cvmx_bootinfo_ptr = CASTPTR(cvmx_bootinfo_t, app_desc_ptr->cvmx_desc_vaddr);
|
|
|
|
/* copy application information for simple exec use */
|
|
/* Populate the sys_info structure from the boot descriptor block created by the bootloader.
|
|
** The boot descriptor block is put in the top of the heap, so it will be overwritten when the
|
|
** heap is fully used. Information that is to be used must be copied before that.
|
|
** Applications should only use the sys_info structure, not the boot descriptor
|
|
*/
|
|
if (cvmx_bootinfo_ptr->major_version == 1)
|
|
{
|
|
sys_info_ptr->core_mask = cvmx_bootinfo_ptr->core_mask;
|
|
sys_info_ptr->heap_base = cvmx_bootinfo_ptr->heap_base;
|
|
sys_info_ptr->heap_size = cvmx_bootinfo_ptr->heap_end - cvmx_bootinfo_ptr->heap_base;
|
|
sys_info_ptr->stack_top = cvmx_bootinfo_ptr->stack_top;
|
|
sys_info_ptr->stack_size = cvmx_bootinfo_ptr->stack_size;
|
|
sys_info_ptr->init_core = cvmx_get_core_num();
|
|
sys_info_ptr->phy_mem_desc_addr = cvmx_bootinfo_ptr->phy_mem_desc_addr;
|
|
sys_info_ptr->exception_base_addr = cvmx_bootinfo_ptr->exception_base_addr;
|
|
sys_info_ptr->cpu_clock_hz = cvmx_bootinfo_ptr->eclock_hz;
|
|
sys_info_ptr->dram_data_rate_hz = cvmx_bootinfo_ptr->dclock_hz * 2;
|
|
|
|
sys_info_ptr->board_type = cvmx_bootinfo_ptr->board_type;
|
|
sys_info_ptr->board_rev_major = cvmx_bootinfo_ptr->board_rev_major;
|
|
sys_info_ptr->board_rev_minor = cvmx_bootinfo_ptr->board_rev_minor;
|
|
memcpy(sys_info_ptr->mac_addr_base, cvmx_bootinfo_ptr->mac_addr_base, 6);
|
|
sys_info_ptr->mac_addr_count = cvmx_bootinfo_ptr->mac_addr_count;
|
|
memcpy(sys_info_ptr->board_serial_number, cvmx_bootinfo_ptr->board_serial_number, CVMX_BOOTINFO_OCTEON_SERIAL_LEN);
|
|
sys_info_ptr->console_uart_num = 0;
|
|
if (cvmx_bootinfo_ptr->flags & OCTEON_BL_FLAG_CONSOLE_UART1)
|
|
sys_info_ptr->console_uart_num = 1;
|
|
|
|
if (cvmx_bootinfo_ptr->dram_size > 32*1024*1024)
|
|
sys_info_ptr->system_dram_size = (uint64_t)cvmx_bootinfo_ptr->dram_size; /* older bootloaders incorrectly gave this in bytes, so don't convert */
|
|
else
|
|
sys_info_ptr->system_dram_size = (uint64_t)cvmx_bootinfo_ptr->dram_size * 1024 * 1024; /* convert from Megabytes to bytes */
|
|
if (cvmx_bootinfo_ptr->minor_version >= 1)
|
|
{
|
|
sys_info_ptr->compact_flash_common_base_addr = cvmx_bootinfo_ptr->compact_flash_common_base_addr;
|
|
sys_info_ptr->compact_flash_attribute_base_addr = cvmx_bootinfo_ptr->compact_flash_attribute_base_addr;
|
|
sys_info_ptr->led_display_base_addr = cvmx_bootinfo_ptr->led_display_base_addr;
|
|
}
|
|
else if (sys_info_ptr->board_type == CVMX_BOARD_TYPE_EBT3000 ||
|
|
sys_info_ptr->board_type == CVMX_BOARD_TYPE_EBT5800 ||
|
|
sys_info_ptr->board_type == CVMX_BOARD_TYPE_EBT5810)
|
|
{
|
|
/* Default these variables so that users of structure can be the same no
|
|
** matter what version fo boot info block the bootloader passes */
|
|
sys_info_ptr->compact_flash_common_base_addr = 0x1d000000 + 0x800;
|
|
sys_info_ptr->compact_flash_attribute_base_addr = 0x1d010000;
|
|
if (sys_info_ptr->board_rev_major == 1)
|
|
sys_info_ptr->led_display_base_addr = 0x1d020000;
|
|
else
|
|
sys_info_ptr->led_display_base_addr = 0x1d020000 + 0xf8;
|
|
}
|
|
else
|
|
{
|
|
sys_info_ptr->compact_flash_common_base_addr = 0;
|
|
sys_info_ptr->compact_flash_attribute_base_addr = 0;
|
|
sys_info_ptr->led_display_base_addr = 0;
|
|
}
|
|
|
|
if (cvmx_bootinfo_ptr->minor_version >= 2)
|
|
{
|
|
sys_info_ptr->dfa_ref_clock_hz = cvmx_bootinfo_ptr->dfa_ref_clock_hz;
|
|
sys_info_ptr->bootloader_config_flags = cvmx_bootinfo_ptr->config_flags;
|
|
}
|
|
else
|
|
{
|
|
sys_info_ptr->dfa_ref_clock_hz = 0;
|
|
sys_info_ptr->bootloader_config_flags = 0;
|
|
if (app_desc_ptr->flags & OCTEON_BL_FLAG_DEBUG)
|
|
sys_info_ptr->bootloader_config_flags |= CVMX_BOOTINFO_CFG_FLAG_DEBUG;
|
|
if (app_desc_ptr->flags & OCTEON_BL_FLAG_NO_MAGIC)
|
|
sys_info_ptr->bootloader_config_flags |= CVMX_BOOTINFO_CFG_FLAG_NO_MAGIC;
|
|
}
|
|
|
|
}
|
|
else
|
|
{
|
|
printf("ERROR: Incompatible CVMX descriptor passed by bootloader: %d.%d\n",
|
|
(int)cvmx_bootinfo_ptr->major_version, (int)cvmx_bootinfo_ptr->minor_version);
|
|
exit(-1);
|
|
}
|
|
if ((cvmx_bootinfo_ptr->minor_version >= 3) && (cvmx_bootinfo_ptr->fdt_addr != 0))
|
|
{
|
|
sys_info_ptr->fdt_addr = UNMAPPED_PTR(cvmx_bootinfo_ptr->fdt_addr);
|
|
if (fdt_check_header((const void *)sys_info_ptr->fdt_addr))
|
|
{
|
|
printf("ERROR : Corrupt Device Tree.\n");
|
|
exit(-1);
|
|
}
|
|
printf("Using device tree\n");
|
|
}
|
|
else
|
|
{
|
|
sys_info_ptr->fdt_addr = 0;
|
|
}
|
|
}
|
|
|
|
|
|
/**
|
|
* Interrupt handler for calling exit on Control-C interrupts.
|
|
*
|
|
* @param irq_number IRQ interrupt number
|
|
* @param registers CPU registers at the time of the interrupt
|
|
* @param user_arg Unused user argument
|
|
*/
|
|
static void process_break_interrupt(int irq_number, uint64_t registers[32], void *user_arg)
|
|
{
|
|
/* Exclude new functionality when building with older toolchains */
|
|
#if OCTEON_APP_INIT_H_VERSION >= 3
|
|
int uart = irq_number - CVMX_IRQ_UART0;
|
|
cvmx_uart_lsr_t lsrval;
|
|
|
|
/* Check for a Control-C interrupt from the console. This loop will eat
|
|
all input received on the uart */
|
|
lsrval.u64 = cvmx_read_csr(CVMX_MIO_UARTX_LSR(uart));
|
|
while (lsrval.s.dr)
|
|
{
|
|
int c = cvmx_read_csr(CVMX_MIO_UARTX_RBR(uart));
|
|
if (c == '\003')
|
|
{
|
|
register uint64_t tmp;
|
|
|
|
/* Wait for an another Control-C if right now we have no
|
|
access to the console. After this point we hold the
|
|
lock and use a different lock to synchronize between
|
|
the memfile dumps from different cores. As a
|
|
consequence regular printfs *don't* work after this
|
|
point! */
|
|
if (__octeon_uart_trylock () == 1)
|
|
return;
|
|
|
|
/* Pulse MCD0 signal on Ctrl-C to stop all the cores. Also
|
|
set the MCD0 to be not masked by this core so we know
|
|
the signal is received by someone */
|
|
asm volatile (
|
|
"dmfc0 %0, $22\n"
|
|
"ori %0, %0, 0x1110\n"
|
|
"dmtc0 %0, $22\n"
|
|
: "=r" (tmp));
|
|
}
|
|
lsrval.u64 = cvmx_read_csr(CVMX_MIO_UARTX_LSR(uart));
|
|
}
|
|
#endif
|
|
}
|
|
|
|
/**
|
|
* This is the debug exception handler with "break". Before calling exit to
|
|
* dump the profile-feedback output it releases the lock on the console.
|
|
* This way if there is buffered data in stdout it can still be flushed.
|
|
* stdio is required to flush all output during an fread.
|
|
*/
|
|
|
|
static void exit_on_break(void)
|
|
{
|
|
#if OCTEON_APP_INIT_H_VERSION >= 4
|
|
unsigned int coremask = cvmx_sysinfo_get()->core_mask;
|
|
|
|
cvmx_coremask_barrier_sync(coremask);
|
|
if (cvmx_coremask_first_core(coremask))
|
|
__octeon_uart_unlock();
|
|
#endif
|
|
|
|
exit(0);
|
|
}
|
|
|
|
/* Add string signature to applications so that we can easily tell what
|
|
** Octeon revision they were compiled for. Don't make static to avoid unused
|
|
** variable warning. */
|
|
#define xstr(s) str(s)
|
|
#define str(s) #s
|
|
|
|
int octeon_model_version_check(uint32_t chip_id);
|
|
|
|
#define OMS xstr(OCTEON_MODEL)
|
|
char octeon_rev_signature[] =
|
|
#ifdef USE_RUNTIME_MODEL_CHECKS
|
|
"Compiled for runtime Octeon model checking";
|
|
#else
|
|
"Compiled for Octeon processor id: "OMS;
|
|
#endif
|
|
|
|
#define OCTEON_BL_FLAG_HPLUG_CORES (1 << 6)
|
|
void __cvmx_app_init(uint64_t app_desc_addr)
|
|
{
|
|
/* App descriptor used by bootloader */
|
|
octeon_boot_descriptor_t *app_desc_ptr = CASTPTR(octeon_boot_descriptor_t, app_desc_addr);
|
|
|
|
/* app info structure used by the simple exec */
|
|
cvmx_sysinfo_t *sys_info_ptr = cvmx_sysinfo_get();
|
|
int breakflag = 0;
|
|
|
|
//printf("coremask=%08x flags=%08x \n", app_desc_ptr->core_mask, app_desc_ptr->flags);
|
|
if (cvmx_coremask_first_core(app_desc_ptr->core_mask))
|
|
{
|
|
/* Intialize the bootmem allocator with the descriptor that was provided by
|
|
* the bootloader
|
|
* IMPORTANT: All printfs must happen after this since PCI console uses named
|
|
* blocks.
|
|
*/
|
|
cvmx_bootmem_init(CASTPTR(cvmx_bootinfo_t, app_desc_ptr->cvmx_desc_vaddr)->phy_mem_desc_addr);
|
|
|
|
/* do once per application setup */
|
|
if (app_desc_ptr->desc_version < 6)
|
|
{
|
|
printf("Obsolete bootloader, can't run application\n");
|
|
exit(-1);
|
|
}
|
|
else
|
|
{
|
|
/* Handle all newer versions here.... */
|
|
if (app_desc_ptr->desc_version > 7)
|
|
{
|
|
printf("Warning: newer boot descripter version than expected\n");
|
|
}
|
|
process_boot_desc_ver_6(app_desc_ptr,sys_info_ptr);
|
|
|
|
}
|
|
|
|
/*
|
|
* set up the feature map and config.
|
|
*/
|
|
octeon_feature_init();
|
|
|
|
__cvmx_helper_cfg_init();
|
|
}
|
|
/* The flags varibale get copied over at some places and tracing the origins
|
|
found that
|
|
** In octeon_setup_boot_desc_block
|
|
. cvmx_bootinfo_array[core].flags is initialized and the various bits are set
|
|
. cvmx_bootinfo_array[core].flags gets copied to boot_desc[core].flags
|
|
. Then boot_desc then get copied over to the end of the application heap and
|
|
boot_info_block_array[core].boot_descr_addr is set to point to the boot_desc
|
|
in heap.
|
|
** In start_app boot_vect->boot_info_addr->boot_desc_addr is referenced and passed on
|
|
to octeon_setup_crt0_tlb() and this puts it into r16
|
|
** In ctr0.S of the toolchain r16 is picked up and passed on as a parameter to
|
|
__cvmx_app_init
|
|
|
|
Note : boot_vect->boot_info_addr points to boot_info_block_array[core] and this
|
|
pointer is setup in octeon_setup_boot_vector()
|
|
*/
|
|
|
|
if (!(app_desc_ptr->flags & OCTEON_BL_FLAG_HPLUG_CORES))
|
|
cvmx_coremask_barrier_sync(app_desc_ptr->core_mask);
|
|
|
|
|
|
breakflag = sys_info_ptr->bootloader_config_flags & CVMX_BOOTINFO_CFG_FLAG_BREAK;
|
|
|
|
/* No need to initialize bootmem, interrupts, interrupt handler and error handler
|
|
if version does not match. */
|
|
if (cvmx_coremask_first_core(sys_info_ptr->core_mask))
|
|
{
|
|
/* Check to make sure the Chip version matches the configured version */
|
|
uint32_t chip_id = cvmx_get_proc_id();
|
|
/* Make sure we can properly run on this chip */
|
|
octeon_model_version_check(chip_id);
|
|
}
|
|
cvmx_interrupt_initialize();
|
|
if (cvmx_coremask_first_core(sys_info_ptr->core_mask))
|
|
{
|
|
int break_uart = 0;
|
|
unsigned int i;
|
|
|
|
if (breakflag && cvmx_debug_booted())
|
|
{
|
|
printf("ERROR: Using debug and break together in not supported.\n");
|
|
while (1)
|
|
;
|
|
}
|
|
|
|
/* Search through the arguments for a break=X or a debug=X. */
|
|
for (i = 0; i < app_desc_ptr->argc; i++)
|
|
{
|
|
const char *argv = CASTPTR(const char, CVMX_ADD_SEG32(CVMX_MIPS32_SPACE_KSEG0, app_desc_ptr->argv[i]));
|
|
if (strncmp(argv, "break=", 6) == 0)
|
|
break_uart = atoi(argv + 6);
|
|
else if (strncmp(argv, "debug=", 6) == 0)
|
|
cvmx_debug_uart = atoi(argv + 6);
|
|
}
|
|
|
|
if (breakflag)
|
|
{
|
|
int32_t *trampoline = CASTPTR(int32_t, CVMX_ADD_SEG32(CVMX_MIPS32_SPACE_KSEG0, BOOTLOADER_DEBUG_TRAMPOLINE));
|
|
/* On debug exception, call exit_on_break from all cores. */
|
|
*trampoline = (int32_t)(long)&exit_on_break;
|
|
cvmx_uart_enable_intr(break_uart, process_break_interrupt);
|
|
}
|
|
}
|
|
if ( !(app_desc_ptr->flags & OCTEON_BL_FLAG_HPLUG_CORES))
|
|
cvmx_coremask_barrier_sync(app_desc_ptr->core_mask);
|
|
|
|
/* Clear BEV now that we have installed exception handlers. */
|
|
uint64_t tmp;
|
|
asm volatile (
|
|
" .set push \n"
|
|
" .set mips64 \n"
|
|
" .set noreorder \n"
|
|
" .set noat \n"
|
|
" mfc0 %[tmp], $12, 0 \n"
|
|
" li $at, 1 << 22 \n"
|
|
" not $at, $at \n"
|
|
" and %[tmp], $at \n"
|
|
" mtc0 %[tmp], $12, 0 \n"
|
|
" .set pop \n"
|
|
: [tmp] "=&r" (tmp) : );
|
|
|
|
/* Set all cores to stop on MCD0 signals */
|
|
asm volatile(
|
|
"dmfc0 %0, $22, 0\n"
|
|
"or %0, %0, 0x1100\n"
|
|
"dmtc0 %0, $22, 0\n" : "=r" (tmp));
|
|
|
|
CVMX_SYNC;
|
|
/* Now intialize the debug exception handler as BEV is cleared. */
|
|
if ((!breakflag) && (!(app_desc_ptr->flags & OCTEON_BL_FLAG_HPLUG_CORES)))
|
|
cvmx_debug_init();
|
|
|
|
/* Synchronise all cores at this point */
|
|
if ( !(app_desc_ptr->flags & OCTEON_BL_FLAG_HPLUG_CORES))
|
|
cvmx_coremask_barrier_sync(app_desc_ptr->core_mask);
|
|
|
|
}
|
|
|
|
int cvmx_user_app_init(void)
|
|
{
|
|
uint64_t bist_val;
|
|
uint64_t mask;
|
|
int bist_errors = 0;
|
|
uint64_t tmp;
|
|
uint64_t base_addr;
|
|
|
|
|
|
/* Put message on LED display */
|
|
if (cvmx_sysinfo_get()->board_type != CVMX_BOARD_TYPE_SIM)
|
|
ebt3000_str_write("CVMX ");
|
|
|
|
/* Check BIST results for COP0 registers, some values only meaningful in pass 2 */
|
|
CVMX_MF_CACHE_ERR(bist_val);
|
|
mask = (0x3fULL<<32); // Icache;BHT;AES;HSH/GFM;LRU;register file
|
|
bist_val &= mask;
|
|
if (bist_val)
|
|
{
|
|
printf("BIST FAILURE: COP0_CACHE_ERR: 0x%llx\n", (unsigned long long)bist_val);
|
|
bist_errors++;
|
|
}
|
|
|
|
mask = 0xfc00000000000000ull;
|
|
CVMX_MF_CVM_MEM_CTL(bist_val);
|
|
bist_val &= mask;
|
|
if (bist_val)
|
|
{
|
|
printf("BIST FAILURE: COP0_CVM_MEM_CTL: 0x%llx\n", (unsigned long long)bist_val);
|
|
bist_errors++;
|
|
}
|
|
|
|
/* Set up 4 cache lines of local memory, make available from Kernel space */
|
|
CVMX_MF_CVM_MEM_CTL(tmp);
|
|
tmp &= ~0x1ffull;
|
|
tmp |= 0x104ull;
|
|
/* Set WBTHRESH=4 as per Core-14752 errata in cn63xxp1.X. */
|
|
if (OCTEON_IS_MODEL(OCTEON_CN63XX_PASS1_X))
|
|
{
|
|
tmp &= ~(0xfull << 11);
|
|
tmp |= 4 << 11;
|
|
}
|
|
CVMX_MT_CVM_MEM_CTL(tmp);
|
|
|
|
if (OCTEON_IS_MODEL(OCTEON_CN63XX_PASS2_X))
|
|
{
|
|
/* Clear the lines of scratch memory configured, for
|
|
** 63XX pass 2 errata Core-15169. */
|
|
uint64_t addr;
|
|
unsigned num_lines;
|
|
CVMX_MF_CVM_MEM_CTL(tmp);
|
|
num_lines = tmp & 0x3f;
|
|
for (addr = 0; addr < CVMX_CACHE_LINE_SIZE * num_lines; addr += 8)
|
|
cvmx_scratch_write64(addr, 0);
|
|
}
|
|
|
|
#if CVMX_USE_1_TO_1_TLB_MAPPINGS
|
|
|
|
/* Check to see if the bootloader is indicating that the application is outside
|
|
** of the 0x10000000 0x20000000 range, in which case we can't use 1-1 mappings */
|
|
if (cvmx_sysinfo_get()->bootloader_config_flags & CVMX_BOOTINFO_CFG_FLAG_OVERSIZE_TLB_MAPPING)
|
|
{
|
|
printf("ERROR: 1-1 TLB mappings configured and oversize application loaded.\n");
|
|
printf("ERROR: Either 1-1 TLB mappings must be disabled or application size reduced.\n");
|
|
exit(-1);
|
|
}
|
|
|
|
/* Create 1-1 Mappings for all DRAM up to 8 gigs, excluding the low 1 Megabyte. This area
|
|
** is reserved for the bootloader and exception vectors. By not mapping this area, NULL pointer
|
|
** dereferences will be caught with TLB exceptions. Exception handlers should be written
|
|
** using XKPHYS or KSEG0 addresses. */
|
|
#if CVMX_NULL_POINTER_PROTECT
|
|
/* Exclude low 1 MByte from mapping to detect NULL pointer accesses.
|
|
** The only down side of this is it uses more TLB mappings */
|
|
cvmx_core_add_fixed_tlb_mapping_bits(0x0, 0x0, 0x100000 | TLB_DIRTY | TLB_VALID | TLB_GLOBAL, CVMX_TLB_PAGEMASK_1M);
|
|
cvmx_core_add_fixed_tlb_mapping(0x200000, 0x200000, 0x300000, CVMX_TLB_PAGEMASK_1M);
|
|
cvmx_core_add_fixed_tlb_mapping(0x400000, 0x400000, 0x500000, CVMX_TLB_PAGEMASK_1M);
|
|
cvmx_core_add_fixed_tlb_mapping(0x600000, 0x600000, 0x700000, CVMX_TLB_PAGEMASK_1M);
|
|
|
|
cvmx_core_add_fixed_tlb_mapping(0x800000, 0x800000, 0xC00000, CVMX_TLB_PAGEMASK_4M);
|
|
cvmx_core_add_fixed_tlb_mapping(0x1000000, 0x1000000, 0x1400000, CVMX_TLB_PAGEMASK_4M);
|
|
cvmx_core_add_fixed_tlb_mapping(0x1800000, 0x1800000, 0x1c00000, CVMX_TLB_PAGEMASK_4M);
|
|
|
|
cvmx_core_add_fixed_tlb_mapping(0x2000000, 0x2000000, 0x3000000, CVMX_TLB_PAGEMASK_16M);
|
|
cvmx_core_add_fixed_tlb_mapping(0x4000000, 0x4000000, 0x5000000, CVMX_TLB_PAGEMASK_16M);
|
|
cvmx_core_add_fixed_tlb_mapping(0x6000000, 0x6000000, 0x7000000, CVMX_TLB_PAGEMASK_16M);
|
|
#else
|
|
/* Map entire low 128 Megs, including 0x0 */
|
|
cvmx_core_add_fixed_tlb_mapping(0x0, 0x0, 0x4000000ULL, CVMX_TLB_PAGEMASK_64M);
|
|
#endif
|
|
cvmx_core_add_fixed_tlb_mapping(0x8000000ULL, 0x8000000ULL, 0xc000000ULL, CVMX_TLB_PAGEMASK_64M);
|
|
|
|
if (OCTEON_IS_MODEL(OCTEON_CN6XXX))
|
|
{
|
|
for (base_addr = 0x20000000ULL; base_addr < (cvmx_sysinfo_get()->system_dram_size + 0x10000000ULL); base_addr += 0x20000000ULL)
|
|
{
|
|
if (0 > cvmx_core_add_fixed_tlb_mapping(base_addr, base_addr, base_addr + 0x10000000ULL, CVMX_TLB_PAGEMASK_256M))
|
|
{
|
|
printf("ERROR adding 1-1 TLB mapping for address 0x%llx\n", (unsigned long long)base_addr);
|
|
/* Exit from here, as expected memory mappings aren't set
|
|
up if this fails */
|
|
exit(-1);
|
|
}
|
|
}
|
|
}
|
|
else
|
|
{
|
|
/* Create 1-1 mapping for next 256 megs
|
|
** bottom page is not valid */
|
|
cvmx_core_add_fixed_tlb_mapping_bits(0x400000000ULL, 0, 0x410000000ULL | TLB_DIRTY | TLB_VALID | TLB_GLOBAL, CVMX_TLB_PAGEMASK_256M);
|
|
|
|
/* Map from 0.5 up to the installed memory size in 512 MByte chunks. If this loop runs out of memory,
|
|
** the NULL pointer detection can be disabled to free up more TLB entries. */
|
|
if (cvmx_sysinfo_get()->system_dram_size > 0x20000000ULL)
|
|
{
|
|
for (base_addr = 0x20000000ULL; base_addr <= (cvmx_sysinfo_get()->system_dram_size - 0x20000000ULL); base_addr += 0x20000000ULL)
|
|
{
|
|
if (0 > cvmx_core_add_fixed_tlb_mapping(base_addr, base_addr, base_addr + 0x10000000ULL, CVMX_TLB_PAGEMASK_256M))
|
|
{
|
|
printf("ERROR adding 1-1 TLB mapping for address 0x%llx\n", (unsigned long long)base_addr);
|
|
/* Exit from here, as expected memory mappings
|
|
aren't set up if this fails */
|
|
exit(-1);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
#endif
|
|
|
|
|
|
cvmx_sysinfo_t *sys_info_ptr = cvmx_sysinfo_get();
|
|
cvmx_bootmem_init(sys_info_ptr->phy_mem_desc_addr);
|
|
|
|
/* Initialize QLM and JTAG settings. Also apply any erratas. */
|
|
if (cvmx_coremask_first_core(cvmx_sysinfo_get()->core_mask))
|
|
cvmx_qlm_init();
|
|
|
|
return(0);
|
|
}
|
|
|
|
void __cvmx_app_exit(void)
|
|
{
|
|
cvmx_debug_finish();
|
|
|
|
if (cvmx_sysinfo_get()->board_type == CVMX_BOARD_TYPE_SIM)
|
|
{
|
|
CVMX_BREAK;
|
|
}
|
|
/* Hang forever, until more appropriate stand alone simple executive
|
|
exit() is implemented */
|
|
|
|
while (1);
|
|
}
|
|
|
|
|
|
|