775 lines
19 KiB
C
775 lines
19 KiB
C
/*-
|
|
* Copyright (c) 1990 The Regents of the University of California.
|
|
* Copyright (c) 2010 Alexander Motin <mav@FreeBSD.org>
|
|
* All rights reserved.
|
|
*
|
|
* This code is derived from software contributed to Berkeley by
|
|
* William Jolitz and Don Ahn.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 4. Neither the name of the University nor the names of its contributors
|
|
* may be used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*
|
|
* from: @(#)clock.c 7.2 (Berkeley) 5/12/91
|
|
*/
|
|
|
|
#include <sys/cdefs.h>
|
|
__FBSDID("$FreeBSD$");
|
|
|
|
/*
|
|
* Routines to handle clock hardware.
|
|
*/
|
|
|
|
#include "opt_clock.h"
|
|
#include "opt_isa.h"
|
|
#include "opt_mca.h"
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/bus.h>
|
|
#include <sys/lock.h>
|
|
#include <sys/kdb.h>
|
|
#include <sys/mutex.h>
|
|
#include <sys/proc.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/module.h>
|
|
#include <sys/rman.h>
|
|
#include <sys/sched.h>
|
|
#include <sys/smp.h>
|
|
#include <sys/sysctl.h>
|
|
#include <sys/timeet.h>
|
|
#include <sys/timetc.h>
|
|
|
|
#include <machine/clock.h>
|
|
#include <machine/cpu.h>
|
|
#include <machine/intr_machdep.h>
|
|
#include <machine/ppireg.h>
|
|
#include <machine/timerreg.h>
|
|
#include <x86/init.h>
|
|
|
|
#ifdef PC98
|
|
#include <pc98/pc98/pc98_machdep.h>
|
|
#else
|
|
#include <isa/rtc.h>
|
|
#endif
|
|
#ifdef DEV_ISA
|
|
#ifdef PC98
|
|
#include <pc98/cbus/cbus.h>
|
|
#else
|
|
#include <isa/isareg.h>
|
|
#endif
|
|
#include <isa/isavar.h>
|
|
#endif
|
|
|
|
#ifdef DEV_MCA
|
|
#include <i386/bios/mca_machdep.h>
|
|
#endif
|
|
|
|
int clkintr_pending;
|
|
#ifndef TIMER_FREQ
|
|
#ifdef PC98
|
|
#define TIMER_FREQ 2457600
|
|
#else
|
|
#define TIMER_FREQ 1193182
|
|
#endif
|
|
#endif
|
|
u_int i8254_freq = TIMER_FREQ;
|
|
TUNABLE_INT("hw.i8254.freq", &i8254_freq);
|
|
int i8254_max_count;
|
|
static int i8254_timecounter = 1;
|
|
|
|
struct mtx clock_lock;
|
|
static struct intsrc *i8254_intsrc;
|
|
static uint16_t i8254_lastcount;
|
|
static uint16_t i8254_offset;
|
|
static int (*i8254_pending)(struct intsrc *);
|
|
static int i8254_ticked;
|
|
|
|
struct attimer_softc {
|
|
int intr_en;
|
|
int port_rid, intr_rid;
|
|
struct resource *port_res;
|
|
struct resource *intr_res;
|
|
#ifdef PC98
|
|
int port_rid2;
|
|
struct resource *port_res2;
|
|
#endif
|
|
void *intr_handler;
|
|
struct timecounter tc;
|
|
struct eventtimer et;
|
|
int mode;
|
|
#define MODE_STOP 0
|
|
#define MODE_PERIODIC 1
|
|
#define MODE_ONESHOT 2
|
|
uint32_t period;
|
|
};
|
|
static struct attimer_softc *attimer_sc = NULL;
|
|
|
|
static int timer0_period = -2;
|
|
static int timer0_mode = 0xffff;
|
|
static int timer0_last = 0xffff;
|
|
|
|
/* Values for timerX_state: */
|
|
#define RELEASED 0
|
|
#define RELEASE_PENDING 1
|
|
#define ACQUIRED 2
|
|
#define ACQUIRE_PENDING 3
|
|
|
|
static u_char timer2_state;
|
|
|
|
static unsigned i8254_get_timecount(struct timecounter *tc);
|
|
static void set_i8254_freq(int mode, uint32_t period);
|
|
|
|
void
|
|
clock_init(void)
|
|
{
|
|
/* Init the clock lock */
|
|
mtx_init(&clock_lock, "clk", NULL, MTX_SPIN | MTX_NOPROFILE);
|
|
/* Init the clock in order to use DELAY */
|
|
init_ops.early_clock_source_init();
|
|
}
|
|
|
|
static int
|
|
clkintr(void *arg)
|
|
{
|
|
struct attimer_softc *sc = (struct attimer_softc *)arg;
|
|
|
|
if (i8254_timecounter && sc->period != 0) {
|
|
mtx_lock_spin(&clock_lock);
|
|
if (i8254_ticked)
|
|
i8254_ticked = 0;
|
|
else {
|
|
i8254_offset += i8254_max_count;
|
|
i8254_lastcount = 0;
|
|
}
|
|
clkintr_pending = 0;
|
|
mtx_unlock_spin(&clock_lock);
|
|
}
|
|
|
|
if (sc->et.et_active && sc->mode != MODE_STOP)
|
|
sc->et.et_event_cb(&sc->et, sc->et.et_arg);
|
|
|
|
#ifdef DEV_MCA
|
|
/* Reset clock interrupt by asserting bit 7 of port 0x61 */
|
|
if (MCA_system)
|
|
outb(0x61, inb(0x61) | 0x80);
|
|
#endif
|
|
return (FILTER_HANDLED);
|
|
}
|
|
|
|
int
|
|
timer_spkr_acquire(void)
|
|
{
|
|
int mode;
|
|
|
|
#ifdef PC98
|
|
mode = TIMER_SEL1 | TIMER_SQWAVE | TIMER_16BIT;
|
|
#else
|
|
mode = TIMER_SEL2 | TIMER_SQWAVE | TIMER_16BIT;
|
|
#endif
|
|
|
|
if (timer2_state != RELEASED)
|
|
return (-1);
|
|
timer2_state = ACQUIRED;
|
|
|
|
/*
|
|
* This access to the timer registers is as atomic as possible
|
|
* because it is a single instruction. We could do better if we
|
|
* knew the rate. Use of splclock() limits glitches to 10-100us,
|
|
* and this is probably good enough for timer2, so we aren't as
|
|
* careful with it as with timer0.
|
|
*/
|
|
#ifdef PC98
|
|
outb(TIMER_MODE, TIMER_SEL1 | (mode & 0x3f));
|
|
#else
|
|
outb(TIMER_MODE, TIMER_SEL2 | (mode & 0x3f));
|
|
#endif
|
|
ppi_spkr_on(); /* enable counter2 output to speaker */
|
|
return (0);
|
|
}
|
|
|
|
int
|
|
timer_spkr_release(void)
|
|
{
|
|
|
|
if (timer2_state != ACQUIRED)
|
|
return (-1);
|
|
timer2_state = RELEASED;
|
|
#ifdef PC98
|
|
outb(TIMER_MODE, TIMER_SEL1 | TIMER_SQWAVE | TIMER_16BIT);
|
|
#else
|
|
outb(TIMER_MODE, TIMER_SEL2 | TIMER_SQWAVE | TIMER_16BIT);
|
|
#endif
|
|
ppi_spkr_off(); /* disable counter2 output to speaker */
|
|
return (0);
|
|
}
|
|
|
|
void
|
|
timer_spkr_setfreq(int freq)
|
|
{
|
|
|
|
freq = i8254_freq / freq;
|
|
mtx_lock_spin(&clock_lock);
|
|
#ifdef PC98
|
|
outb(TIMER_CNTR1, freq & 0xff);
|
|
outb(TIMER_CNTR1, freq >> 8);
|
|
#else
|
|
outb(TIMER_CNTR2, freq & 0xff);
|
|
outb(TIMER_CNTR2, freq >> 8);
|
|
#endif
|
|
mtx_unlock_spin(&clock_lock);
|
|
}
|
|
|
|
static int
|
|
getit(void)
|
|
{
|
|
int high, low;
|
|
|
|
mtx_lock_spin(&clock_lock);
|
|
|
|
/* Select timer0 and latch counter value. */
|
|
outb(TIMER_MODE, TIMER_SEL0 | TIMER_LATCH);
|
|
|
|
low = inb(TIMER_CNTR0);
|
|
high = inb(TIMER_CNTR0);
|
|
|
|
mtx_unlock_spin(&clock_lock);
|
|
return ((high << 8) | low);
|
|
}
|
|
|
|
/*
|
|
* Wait "n" microseconds.
|
|
* Relies on timer 1 counting down from (i8254_freq / hz)
|
|
* Note: timer had better have been programmed before this is first used!
|
|
*/
|
|
void
|
|
i8254_delay(int n)
|
|
{
|
|
int delta, prev_tick, tick, ticks_left;
|
|
#ifdef DELAYDEBUG
|
|
int getit_calls = 1;
|
|
int n1;
|
|
static int state = 0;
|
|
|
|
if (state == 0) {
|
|
state = 1;
|
|
for (n1 = 1; n1 <= 10000000; n1 *= 10)
|
|
DELAY(n1);
|
|
state = 2;
|
|
}
|
|
if (state == 1)
|
|
printf("DELAY(%d)...", n);
|
|
#endif
|
|
/*
|
|
* Read the counter first, so that the rest of the setup overhead is
|
|
* counted. Guess the initial overhead is 20 usec (on most systems it
|
|
* takes about 1.5 usec for each of the i/o's in getit(). The loop
|
|
* takes about 6 usec on a 486/33 and 13 usec on a 386/20. The
|
|
* multiplications and divisions to scale the count take a while).
|
|
*
|
|
* However, if ddb is active then use a fake counter since reading
|
|
* the i8254 counter involves acquiring a lock. ddb must not do
|
|
* locking for many reasons, but it calls here for at least atkbd
|
|
* input.
|
|
*/
|
|
#ifdef KDB
|
|
if (kdb_active)
|
|
prev_tick = 1;
|
|
else
|
|
#endif
|
|
prev_tick = getit();
|
|
n -= 0; /* XXX actually guess no initial overhead */
|
|
/*
|
|
* Calculate (n * (i8254_freq / 1e6)) without using floating point
|
|
* and without any avoidable overflows.
|
|
*/
|
|
if (n <= 0)
|
|
ticks_left = 0;
|
|
else if (n < 256)
|
|
/*
|
|
* Use fixed point to avoid a slow division by 1000000.
|
|
* 39099 = 1193182 * 2^15 / 10^6 rounded to nearest.
|
|
* 2^15 is the first power of 2 that gives exact results
|
|
* for n between 0 and 256.
|
|
*/
|
|
ticks_left = ((u_int)n * 39099 + (1 << 15) - 1) >> 15;
|
|
else
|
|
/*
|
|
* Don't bother using fixed point, although gcc-2.7.2
|
|
* generates particularly poor code for the long long
|
|
* division, since even the slow way will complete long
|
|
* before the delay is up (unless we're interrupted).
|
|
*/
|
|
ticks_left = ((u_int)n * (long long)i8254_freq + 999999)
|
|
/ 1000000;
|
|
|
|
while (ticks_left > 0) {
|
|
#ifdef KDB
|
|
if (kdb_active) {
|
|
#ifdef PC98
|
|
outb(0x5f, 0);
|
|
#else
|
|
inb(0x84);
|
|
#endif
|
|
tick = prev_tick - 1;
|
|
if (tick <= 0)
|
|
tick = i8254_max_count;
|
|
} else
|
|
#endif
|
|
tick = getit();
|
|
#ifdef DELAYDEBUG
|
|
++getit_calls;
|
|
#endif
|
|
delta = prev_tick - tick;
|
|
prev_tick = tick;
|
|
if (delta < 0) {
|
|
delta += i8254_max_count;
|
|
/*
|
|
* Guard against i8254_max_count being wrong.
|
|
* This shouldn't happen in normal operation,
|
|
* but it may happen if set_i8254_freq() is
|
|
* traced.
|
|
*/
|
|
if (delta < 0)
|
|
delta = 0;
|
|
}
|
|
ticks_left -= delta;
|
|
}
|
|
#ifdef DELAYDEBUG
|
|
if (state == 1)
|
|
printf(" %d calls to getit() at %d usec each\n",
|
|
getit_calls, (n + 5) / getit_calls);
|
|
#endif
|
|
}
|
|
|
|
static void
|
|
set_i8254_freq(int mode, uint32_t period)
|
|
{
|
|
int new_count, new_mode;
|
|
|
|
mtx_lock_spin(&clock_lock);
|
|
if (mode == MODE_STOP) {
|
|
if (i8254_timecounter) {
|
|
mode = MODE_PERIODIC;
|
|
new_count = 0x10000;
|
|
} else
|
|
new_count = -1;
|
|
} else {
|
|
new_count = min(((uint64_t)i8254_freq * period +
|
|
0x80000000LLU) >> 32, 0x10000);
|
|
}
|
|
if (new_count == timer0_period)
|
|
goto out;
|
|
i8254_max_count = ((new_count & ~0xffff) != 0) ? 0xffff : new_count;
|
|
timer0_period = (mode == MODE_PERIODIC) ? new_count : -1;
|
|
switch (mode) {
|
|
case MODE_STOP:
|
|
new_mode = TIMER_SEL0 | TIMER_INTTC | TIMER_16BIT;
|
|
outb(TIMER_MODE, new_mode);
|
|
outb(TIMER_CNTR0, 0);
|
|
outb(TIMER_CNTR0, 0);
|
|
break;
|
|
case MODE_PERIODIC:
|
|
new_mode = TIMER_SEL0 | TIMER_RATEGEN | TIMER_16BIT;
|
|
outb(TIMER_MODE, new_mode);
|
|
outb(TIMER_CNTR0, new_count & 0xff);
|
|
outb(TIMER_CNTR0, new_count >> 8);
|
|
break;
|
|
case MODE_ONESHOT:
|
|
if (new_count < 256 && timer0_last < 256) {
|
|
new_mode = TIMER_SEL0 | TIMER_INTTC | TIMER_LSB;
|
|
if (new_mode != timer0_mode)
|
|
outb(TIMER_MODE, new_mode);
|
|
outb(TIMER_CNTR0, new_count & 0xff);
|
|
break;
|
|
}
|
|
new_mode = TIMER_SEL0 | TIMER_INTTC | TIMER_16BIT;
|
|
if (new_mode != timer0_mode)
|
|
outb(TIMER_MODE, new_mode);
|
|
outb(TIMER_CNTR0, new_count & 0xff);
|
|
outb(TIMER_CNTR0, new_count >> 8);
|
|
break;
|
|
default:
|
|
panic("set_i8254_freq: unknown operational mode");
|
|
}
|
|
timer0_mode = new_mode;
|
|
timer0_last = new_count;
|
|
out:
|
|
mtx_unlock_spin(&clock_lock);
|
|
}
|
|
|
|
static void
|
|
i8254_restore(void)
|
|
{
|
|
|
|
timer0_period = -2;
|
|
timer0_mode = 0xffff;
|
|
timer0_last = 0xffff;
|
|
if (attimer_sc != NULL)
|
|
set_i8254_freq(attimer_sc->mode, attimer_sc->period);
|
|
else
|
|
set_i8254_freq(MODE_STOP, 0);
|
|
}
|
|
|
|
#ifndef __amd64__
|
|
/*
|
|
* Restore all the timers non-atomically (XXX: should be atomically).
|
|
*
|
|
* This function is called from pmtimer_resume() to restore all the timers.
|
|
* This should not be necessary, but there are broken laptops that do not
|
|
* restore all the timers on resume. The APM spec was at best vague on the
|
|
* subject.
|
|
* pmtimer is used only with the old APM power management, and not with
|
|
* acpi, which is required for amd64, so skip it in that case.
|
|
*/
|
|
void
|
|
timer_restore(void)
|
|
{
|
|
|
|
i8254_restore(); /* restore i8254_freq and hz */
|
|
#ifndef PC98
|
|
atrtc_restore(); /* reenable RTC interrupts */
|
|
#endif
|
|
}
|
|
#endif
|
|
|
|
/* This is separate from startrtclock() so that it can be called early. */
|
|
void
|
|
i8254_init(void)
|
|
{
|
|
|
|
#ifdef PC98
|
|
if (pc98_machine_type & M_8M)
|
|
i8254_freq = 1996800L; /* 1.9968 MHz */
|
|
#endif
|
|
set_i8254_freq(MODE_STOP, 0);
|
|
}
|
|
|
|
void
|
|
startrtclock()
|
|
{
|
|
|
|
init_TSC();
|
|
}
|
|
|
|
void
|
|
cpu_initclocks(void)
|
|
{
|
|
#ifdef EARLY_AP_STARTUP
|
|
struct thread *td;
|
|
int i;
|
|
|
|
td = curthread;
|
|
cpu_initclocks_bsp();
|
|
CPU_FOREACH(i) {
|
|
if (i == 0)
|
|
continue;
|
|
thread_lock(td);
|
|
sched_bind(td, i);
|
|
thread_unlock(td);
|
|
cpu_initclocks_ap();
|
|
}
|
|
thread_lock(td);
|
|
if (sched_is_bound(td))
|
|
sched_unbind(td);
|
|
thread_unlock(td);
|
|
#else
|
|
cpu_initclocks_bsp();
|
|
#endif
|
|
}
|
|
|
|
static int
|
|
sysctl_machdep_i8254_freq(SYSCTL_HANDLER_ARGS)
|
|
{
|
|
int error;
|
|
u_int freq;
|
|
|
|
/*
|
|
* Use `i8254' instead of `timer' in external names because `timer'
|
|
* is too generic. Should use it everywhere.
|
|
*/
|
|
freq = i8254_freq;
|
|
error = sysctl_handle_int(oidp, &freq, 0, req);
|
|
if (error == 0 && req->newptr != NULL) {
|
|
i8254_freq = freq;
|
|
if (attimer_sc != NULL) {
|
|
set_i8254_freq(attimer_sc->mode, attimer_sc->period);
|
|
attimer_sc->tc.tc_frequency = freq;
|
|
} else {
|
|
set_i8254_freq(MODE_STOP, 0);
|
|
}
|
|
}
|
|
return (error);
|
|
}
|
|
|
|
SYSCTL_PROC(_machdep, OID_AUTO, i8254_freq, CTLTYPE_INT | CTLFLAG_RW,
|
|
0, sizeof(u_int), sysctl_machdep_i8254_freq, "IU",
|
|
"i8254 timer frequency");
|
|
|
|
static unsigned
|
|
i8254_get_timecount(struct timecounter *tc)
|
|
{
|
|
device_t dev = (device_t)tc->tc_priv;
|
|
struct attimer_softc *sc = device_get_softc(dev);
|
|
register_t flags;
|
|
uint16_t count;
|
|
u_int high, low;
|
|
|
|
if (sc->period == 0)
|
|
return (i8254_max_count - getit());
|
|
|
|
#ifdef __amd64__
|
|
flags = read_rflags();
|
|
#else
|
|
flags = read_eflags();
|
|
#endif
|
|
mtx_lock_spin(&clock_lock);
|
|
|
|
/* Select timer0 and latch counter value. */
|
|
outb(TIMER_MODE, TIMER_SEL0 | TIMER_LATCH);
|
|
|
|
low = inb(TIMER_CNTR0);
|
|
high = inb(TIMER_CNTR0);
|
|
count = i8254_max_count - ((high << 8) | low);
|
|
if (count < i8254_lastcount ||
|
|
(!i8254_ticked && (clkintr_pending ||
|
|
((count < 20 || (!(flags & PSL_I) &&
|
|
count < i8254_max_count / 2u)) &&
|
|
i8254_pending != NULL && i8254_pending(i8254_intsrc))))) {
|
|
i8254_ticked = 1;
|
|
i8254_offset += i8254_max_count;
|
|
}
|
|
i8254_lastcount = count;
|
|
count += i8254_offset;
|
|
mtx_unlock_spin(&clock_lock);
|
|
return (count);
|
|
}
|
|
|
|
static int
|
|
attimer_start(struct eventtimer *et, sbintime_t first, sbintime_t period)
|
|
{
|
|
device_t dev = (device_t)et->et_priv;
|
|
struct attimer_softc *sc = device_get_softc(dev);
|
|
|
|
if (period != 0) {
|
|
sc->mode = MODE_PERIODIC;
|
|
sc->period = period;
|
|
} else {
|
|
sc->mode = MODE_ONESHOT;
|
|
sc->period = first;
|
|
}
|
|
if (!sc->intr_en) {
|
|
i8254_intsrc->is_pic->pic_enable_source(i8254_intsrc);
|
|
sc->intr_en = 1;
|
|
}
|
|
set_i8254_freq(sc->mode, sc->period);
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
attimer_stop(struct eventtimer *et)
|
|
{
|
|
device_t dev = (device_t)et->et_priv;
|
|
struct attimer_softc *sc = device_get_softc(dev);
|
|
|
|
sc->mode = MODE_STOP;
|
|
sc->period = 0;
|
|
set_i8254_freq(sc->mode, sc->period);
|
|
return (0);
|
|
}
|
|
|
|
#ifdef DEV_ISA
|
|
/*
|
|
* Attach to the ISA PnP descriptors for the timer
|
|
*/
|
|
static struct isa_pnp_id attimer_ids[] = {
|
|
{ 0x0001d041 /* PNP0100 */, "AT timer" },
|
|
{ 0 }
|
|
};
|
|
|
|
#ifdef PC98
|
|
static void
|
|
pc98_alloc_resource(device_t dev)
|
|
{
|
|
static bus_addr_t iat1[] = {0, 2, 4, 6};
|
|
static bus_addr_t iat2[] = {0, 4};
|
|
struct attimer_softc *sc;
|
|
|
|
sc = device_get_softc(dev);
|
|
|
|
sc->port_rid = 0;
|
|
bus_set_resource(dev, SYS_RES_IOPORT, sc->port_rid, IO_TIMER1, 1);
|
|
sc->port_res = isa_alloc_resourcev(dev, SYS_RES_IOPORT,
|
|
&sc->port_rid, iat1, 4, RF_ACTIVE);
|
|
if (sc->port_res == NULL)
|
|
device_printf(dev, "Warning: Couldn't map I/O.\n");
|
|
else
|
|
isa_load_resourcev(sc->port_res, iat1, 4);
|
|
|
|
sc->port_rid2 = 4;
|
|
bus_set_resource(dev, SYS_RES_IOPORT, sc->port_rid2, TIMER_CNTR1, 1);
|
|
sc->port_res2 = isa_alloc_resourcev(dev, SYS_RES_IOPORT,
|
|
&sc->port_rid2, iat2, 2, RF_ACTIVE);
|
|
if (sc->port_res2 == NULL)
|
|
device_printf(dev, "Warning: Couldn't map I/O.\n");
|
|
else
|
|
isa_load_resourcev(sc->port_res2, iat2, 2);
|
|
}
|
|
|
|
static void
|
|
pc98_release_resource(device_t dev)
|
|
{
|
|
struct attimer_softc *sc;
|
|
|
|
sc = device_get_softc(dev);
|
|
|
|
if (sc->port_res)
|
|
bus_release_resource(dev, SYS_RES_IOPORT, sc->port_rid,
|
|
sc->port_res);
|
|
if (sc->port_res2)
|
|
bus_release_resource(dev, SYS_RES_IOPORT, sc->port_rid2,
|
|
sc->port_res2);
|
|
}
|
|
#endif
|
|
|
|
static int
|
|
attimer_probe(device_t dev)
|
|
{
|
|
int result;
|
|
|
|
result = ISA_PNP_PROBE(device_get_parent(dev), dev, attimer_ids);
|
|
/* ENOENT means no PnP-ID, device is hinted. */
|
|
if (result == ENOENT) {
|
|
device_set_desc(dev, "AT timer");
|
|
#ifdef PC98
|
|
/* To print resources correctly. */
|
|
pc98_alloc_resource(dev);
|
|
pc98_release_resource(dev);
|
|
#endif
|
|
return (BUS_PROBE_LOW_PRIORITY);
|
|
}
|
|
return (result);
|
|
}
|
|
|
|
static int
|
|
attimer_attach(device_t dev)
|
|
{
|
|
struct attimer_softc *sc;
|
|
rman_res_t s;
|
|
int i;
|
|
|
|
attimer_sc = sc = device_get_softc(dev);
|
|
bzero(sc, sizeof(struct attimer_softc));
|
|
#ifdef PC98
|
|
pc98_alloc_resource(dev);
|
|
#else
|
|
if (!(sc->port_res = bus_alloc_resource(dev, SYS_RES_IOPORT,
|
|
&sc->port_rid, IO_TIMER1, IO_TIMER1 + 3, 4, RF_ACTIVE)))
|
|
device_printf(dev,"Warning: Couldn't map I/O.\n");
|
|
#endif
|
|
i8254_intsrc = intr_lookup_source(0);
|
|
if (i8254_intsrc != NULL)
|
|
i8254_pending = i8254_intsrc->is_pic->pic_source_pending;
|
|
resource_int_value(device_get_name(dev), device_get_unit(dev),
|
|
"timecounter", &i8254_timecounter);
|
|
set_i8254_freq(MODE_STOP, 0);
|
|
if (i8254_timecounter) {
|
|
sc->tc.tc_get_timecount = i8254_get_timecount;
|
|
sc->tc.tc_counter_mask = 0xffff;
|
|
sc->tc.tc_frequency = i8254_freq;
|
|
sc->tc.tc_name = "i8254";
|
|
sc->tc.tc_quality = 0;
|
|
sc->tc.tc_priv = dev;
|
|
tc_init(&sc->tc);
|
|
}
|
|
if (resource_int_value(device_get_name(dev), device_get_unit(dev),
|
|
"clock", &i) != 0 || i != 0) {
|
|
sc->intr_rid = 0;
|
|
while (bus_get_resource(dev, SYS_RES_IRQ, sc->intr_rid,
|
|
&s, NULL) == 0 && s != 0)
|
|
sc->intr_rid++;
|
|
if (!(sc->intr_res = bus_alloc_resource(dev, SYS_RES_IRQ,
|
|
&sc->intr_rid, 0, 0, 1, RF_ACTIVE))) {
|
|
device_printf(dev,"Can't map interrupt.\n");
|
|
return (0);
|
|
}
|
|
/* Dirty hack, to make bus_setup_intr to not enable source. */
|
|
i8254_intsrc->is_handlers++;
|
|
if ((bus_setup_intr(dev, sc->intr_res,
|
|
INTR_MPSAFE | INTR_TYPE_CLK,
|
|
(driver_filter_t *)clkintr, NULL,
|
|
sc, &sc->intr_handler))) {
|
|
device_printf(dev, "Can't setup interrupt.\n");
|
|
i8254_intsrc->is_handlers--;
|
|
return (0);
|
|
}
|
|
i8254_intsrc->is_handlers--;
|
|
i8254_intsrc->is_pic->pic_enable_intr(i8254_intsrc);
|
|
sc->et.et_name = "i8254";
|
|
sc->et.et_flags = ET_FLAGS_PERIODIC;
|
|
if (!i8254_timecounter)
|
|
sc->et.et_flags |= ET_FLAGS_ONESHOT;
|
|
sc->et.et_quality = 100;
|
|
sc->et.et_frequency = i8254_freq;
|
|
sc->et.et_min_period = (0x0002LLU << 32) / i8254_freq;
|
|
sc->et.et_max_period = (0xfffeLLU << 32) / i8254_freq;
|
|
sc->et.et_start = attimer_start;
|
|
sc->et.et_stop = attimer_stop;
|
|
sc->et.et_priv = dev;
|
|
et_register(&sc->et);
|
|
}
|
|
return(0);
|
|
}
|
|
|
|
static int
|
|
attimer_resume(device_t dev)
|
|
{
|
|
|
|
i8254_restore();
|
|
return (0);
|
|
}
|
|
|
|
static device_method_t attimer_methods[] = {
|
|
/* Device interface */
|
|
DEVMETHOD(device_probe, attimer_probe),
|
|
DEVMETHOD(device_attach, attimer_attach),
|
|
DEVMETHOD(device_detach, bus_generic_detach),
|
|
DEVMETHOD(device_shutdown, bus_generic_shutdown),
|
|
DEVMETHOD(device_suspend, bus_generic_suspend),
|
|
DEVMETHOD(device_resume, attimer_resume),
|
|
{ 0, 0 }
|
|
};
|
|
|
|
static driver_t attimer_driver = {
|
|
"attimer",
|
|
attimer_methods,
|
|
sizeof(struct attimer_softc),
|
|
};
|
|
|
|
static devclass_t attimer_devclass;
|
|
|
|
DRIVER_MODULE(attimer, isa, attimer_driver, attimer_devclass, 0, 0);
|
|
DRIVER_MODULE(attimer, acpi, attimer_driver, attimer_devclass, 0, 0);
|
|
|
|
#endif /* DEV_ISA */
|