Remove default os.ModeDevice in ConvertFileMode

connection.go

@@ -39,19 +39,17 @@ var contextKey interface{} = contextKeyType(0)
 //
 // As of 2015-03-26, the behavior in the kernel is:
 //
-//   - (https://tinyurl.com/2eakn5e9, https://tinyurl.com/mry9e33d) Set the
-//     local variable ra_pages to be init_response->max_readahead divided by
-//     the page size.
+//   - (http://goo.gl/bQ1f1i, http://goo.gl/HwBrR6) Set the local variable
+//     ra_pages to be init_response->max_readahead divided by the page size.
 //
-//   - (https://tinyurl.com/2eakn5e9, https://tinyurl.com/mbpshk8h) Set
-//     backing_dev_info::ra_pages to the min of that value and what was sent in
-//     the request's max_readahead field.
+//   - (http://goo.gl/gcIsSh, http://goo.gl/LKV2vA) Set
+//     backing_dev_info::ra_pages to the min of that value and what was sent
+//     in the request's max_readahead field.
 //
-//   - (https://tinyurl.com/57hpfu4x) Use backing_dev_info::ra_pages when
-//     deciding how much to read ahead.
+//   - (http://goo.gl/u2SqzH) Use backing_dev_info::ra_pages when deciding
+//     how much to read ahead.
 //
-//   - (https://tinyurl.com/ywhfcfte) Don't read ahead at all if that field is
-//     zero.
+//   - (http://goo.gl/JnhbdL) Don't read ahead at all if that field is zero.
 //
 // Reading a page at a time is a drag. Ask for a larger size.
 const maxReadahead = 1 << 20
@@ -196,17 +194,13 @@ func (c *Connection) Init() error {
 		initOp.Flags |= fusekernel.InitNoOpendirSupport
 	}
 
-	// Tell the Kernel to allow sending parallel lookup and readdir operations.
-	if c.cfg.EnableParallelDirOps {
-		initOp.Flags |= fusekernel.InitParallelDirOps
-	}
-
 	// Tell the kernel to do readdirplus (readdir+lookup in one call)
 	if c.cfg.UseReadDirPlus && readdirplusSupport {
 		initOp.Flags |= fusekernel.InitDoReaddirplus
 	}
 
-	return c.Reply(ctx, nil)
+	c.Reply(ctx, nil)
+	return nil
 }
 
 // Log information for an operation with the given ID. calldepth is the depth
@@ -321,13 +315,13 @@ func (c *Connection) handleInterrupt(fuseID uint64) {
 	defer c.mu.Unlock()
 
 	// NOTE(jacobsa): fuse.txt in the Linux kernel documentation
-	// (https://tinyurl.com/2r4ajuwd) defines the kernel <-> userspace protocol
-	// for interrupts.
+	// (https://goo.gl/H55Dnr) defines the kernel <-> userspace protocol for
+	// interrupts.
 	//
 	// In particular, my reading of it is that an interrupt request cannot be
 	// delivered to userspace before the original request. The part about the
 	// race and EAGAIN appears to be aimed at userspace programs that
-	// concurrently process requests (https://tinyurl.com/3euehwfb).
+	// concurrently process requests (cf. http://goo.gl/BES2rs).
 	//
 	// So in this method if we can't find the ID to be interrupted, it means that
 	// the request has already been replied to.
@@ -386,11 +380,6 @@ func (c *Connection) writeMessage(outMsg *buffer.OutMessage) error {
 	var n int
 	expectedLen := outMsg.Len()
 	if outMsg.Sglist != nil {
-		if fusekernel.IsPlatformFuseT {
-			// writev is not atomic on macos, restrict to fuse-t platform
-			writeLock.Lock()
-			defer writeLock.Unlock()
-		}
 		n, err = writev(int(c.dev.Fd()), outMsg.Sglist)
 	} else {
 		// Avoid the retry loop in os.File.Write.
@@ -399,12 +388,8 @@ func (c *Connection) writeMessage(outMsg *buffer.OutMessage) error {
 	if err == nil && n != expectedLen {
 		err = fmt.Errorf("Wrote %d bytes; expected %d", n, expectedLen)
 	}
-	if err != nil {
-		writeErrMsg := fmt.Sprintf("writeMessage: %v %v", err, outMsg.OutHeaderBytes())
-		if c.errorLogger != nil {
-			c.errorLogger.Print(writeErrMsg)
-		}
-		return fmt.Errorf(writeErrMsg)
+	if err != nil && c.errorLogger != nil {
+		c.errorLogger.Printf("writeMessage: %v %v", err, outMsg.OutHeaderBytes())
 	}
 	outMsg.Sglist = nil
 	return err
@@ -481,7 +466,7 @@ func (c *Connection) shouldLogError(
 			return false
 		}
 	case *fuseops.GetXattrOp, *fuseops.ListXattrOp:
-		if err == syscall.ENOSYS || err == syscall.ENODATA || err == syscall.ERANGE {
+		if err == syscall.ENODATA || err == syscall.ERANGE {
 			return false
 		}
 	case *unknownOp:
@@ -494,13 +479,11 @@ func (c *Connection) shouldLogError(
 	return true
 }
 
-var writeLock sync.Mutex
-
 // Reply replies to an op previously read using ReadOp, with the supplied error
 // (or nil if successful). The context must be the context returned by ReadOp.
 //
 // LOCKS_EXCLUDED(c.mu)
-func (c *Connection) Reply(ctx context.Context, opErr error) error {
+func (c *Connection) Reply(ctx context.Context, opErr error) {
 	// Extract the state we stuffed in earlier.
 	var key interface{} = contextKey
 	foo := ctx.Value(key)
@@ -514,25 +497,16 @@ func (c *Connection) Reply(ctx context.Context, opErr error) error {
 	outMsg := state.outMsg
 	fuseID := inMsg.Header().Unique
 
-	defer func() {
-		// Invoke any callbacks set by the FUSE server after the response to the kernel is
-		// complete and before the inMessage and outMessage memory buffers have been freed.
-		callback := c.callbackForOp(op)
-		if callback != nil {
-			callback()
-		}
-
-		// Make sure we destroy the messages when we're done.
 	suppressReuse := false
 	if wr, ok := op.(*fuseops.WriteFileOp); ok {
 		suppressReuse = wr.SuppressReuse
 	}
 
+	// Make sure we destroy the messages when we're done.
 	if !suppressReuse {
-			c.putInMessage(inMsg)
+		defer c.putInMessage(inMsg)
 	}
-		c.putOutMessage(outMsg)
-	}()
+	defer c.putOutMessage(outMsg)
 
 	// Clean up state for this op.
 	c.finishOp(inMsg.Header().Opcode, inMsg.Header().Unique)
@@ -540,7 +514,7 @@ func (c *Connection) Reply(ctx context.Context, opErr error) error {
 	// Debug logging
 	if c.debugLogger != nil {
 		if opErr == nil {
-			c.debugLog(fuseID, 1, "-> %s", describeResponse(op))
+			c.debugLog(fuseID, 1, "-> OK (%s)", describeResponse(op))
 		} else {
 			c.debugLog(fuseID, 1, "-> Error: %q", opErr.Error())
 		}
@@ -557,18 +531,6 @@ func (c *Connection) Reply(ctx context.Context, opErr error) error {
 	if !noResponse {
 		c.writeMessage(outMsg)
 	}
-
-	return nil
-}
-
-func (c *Connection) callbackForOp(op interface{}) func() {
-	switch o := op.(type) {
-	case *fuseops.ReadFileOp:
-		return o.Callback
-	case *fuseops.WriteFileOp:
-		return o.Callback
-	}
-	return nil
 }
 
 // Send a notification to the kernel

conversions.go

@@ -53,23 +53,13 @@ func convertInMessage(
 		o = &fuseops.LookUpInodeOp{
 			Parent:    fuseops.InodeID(inMsg.Header().Nodeid),
 			Name:      string(buf[:n-1]),
-			OpContext: fuseops.OpContext{
-				FuseID: inMsg.Header().Unique,
-				Pid:    inMsg.Header().Pid,
-				Uid:    inMsg.Header().Uid,
-				Gid:    inMsg.Header().Gid,
-			},
+			OpContext: fuseops.OpContext{Pid: inMsg.Header().Pid},
 		}
 
 	case fusekernel.OpGetattr:
 		o = &fuseops.GetInodeAttributesOp{
 			Inode:     fuseops.InodeID(inMsg.Header().Nodeid),
-			OpContext: fuseops.OpContext{
-				FuseID: inMsg.Header().Unique,
-				Pid:    inMsg.Header().Pid,
-				Uid:    inMsg.Header().Uid,
-				Gid:    inMsg.Header().Gid,
-			},
+			OpContext: fuseops.OpContext{Pid: inMsg.Header().Pid},
 		}
 
 	case fusekernel.OpSetattr:
@@ -81,12 +71,7 @@ func convertInMessage(
 
 		to := &fuseops.SetInodeAttributesOp{
 			Inode:     fuseops.InodeID(inMsg.Header().Nodeid),
-			OpContext: fuseops.OpContext{
-				FuseID: inMsg.Header().Unique,
-				Pid:    inMsg.Header().Pid,
-				Uid:    inMsg.Header().Uid,
-				Gid:    inMsg.Header().Gid,
-			},
+			OpContext: fuseops.OpContext{Pid: inMsg.Header().Pid},
 		}
 		o = to
 
@@ -133,12 +118,7 @@ func convertInMessage(
 		o = &fuseops.ForgetInodeOp{
 			Inode:     fuseops.InodeID(inMsg.Header().Nodeid),
 			N:         in.Nlookup,
-			OpContext: fuseops.OpContext{
-				FuseID: inMsg.Header().Unique,
-				Pid:    inMsg.Header().Pid,
-				Uid:    inMsg.Header().Uid,
-				Gid:    inMsg.Header().Gid,
-			},
+			OpContext: fuseops.OpContext{Pid: inMsg.Header().Pid},
 		}
 
 	case fusekernel.OpBatchForget:
@@ -164,12 +144,7 @@ func convertInMessage(
 
 		o = &fuseops.BatchForgetOp{
 			Entries:   entries,
-			OpContext: fuseops.OpContext{
-				FuseID: inMsg.Header().Unique,
-				Pid:    inMsg.Header().Pid,
-				Uid:    inMsg.Header().Uid,
-				Gid:    inMsg.Header().Gid,
-			},
+			OpContext: fuseops.OpContext{Pid: inMsg.Header().Pid},
 		}
 
 	case fusekernel.OpMkdir:
@@ -190,18 +165,13 @@ func convertInMessage(
 			Name:   string(name),
 
 			// On Linux, vfs_mkdir calls through to the inode with at most
-			// permissions and sticky bits set (https://tinyurl.com/3djx8498), and
-			// fuse passes that on directly (https://tinyurl.com/exezw647). In other
-			// words, the fact that this is a directory is implicit in the fact that
-			// the opcode is mkdir. But we want the correct mode to go through, so
-			// ensure that os.ModeDir is set.
+			// permissions and sticky bits set (cf. https://goo.gl/WxgQXk), and fuse
+			// passes that on directly (cf. https://goo.gl/f31aMo). In other words,
+			// the fact that this is a directory is implicit in the fact that the
+			// opcode is mkdir. But we want the correct mode to go through, so ensure
+			// that os.ModeDir is set.
 			Mode:      fuseops.ConvertFileMode(in.Mode) | os.ModeDir,
-			OpContext: fuseops.OpContext{
-				FuseID: inMsg.Header().Unique,
-				Pid:    inMsg.Header().Pid,
-				Uid:    inMsg.Header().Uid,
-				Gid:    inMsg.Header().Gid,
-			},
+			OpContext: fuseops.OpContext{Pid: inMsg.Header().Pid},
 		}
 
 	case fusekernel.OpMknod:
@@ -222,12 +192,7 @@ func convertInMessage(
 			Name:      string(name),
 			Mode:      fuseops.ConvertFileMode(in.Mode),
 			Rdev:      in.Rdev,
-			OpContext: fuseops.OpContext{
-				FuseID: inMsg.Header().Unique,
-				Pid:    inMsg.Header().Pid,
-				Uid:    inMsg.Header().Uid,
-				Gid:    inMsg.Header().Gid,
-			},
+			OpContext: fuseops.OpContext{Pid: inMsg.Header().Pid},
 		}
 
 	case fusekernel.OpCreate:
@@ -247,12 +212,7 @@ func convertInMessage(
 			Parent:    fuseops.InodeID(inMsg.Header().Nodeid),
 			Name:      string(name),
 			Mode:      fuseops.ConvertFileMode(in.Mode),
-			OpContext: fuseops.OpContext{
-				FuseID: inMsg.Header().Unique,
-				Pid:    inMsg.Header().Pid,
-				Uid:    inMsg.Header().Uid,
-				Gid:    inMsg.Header().Gid,
-			},
+			OpContext: fuseops.OpContext{Pid: inMsg.Header().Pid},
 		}
 
 	case fusekernel.OpSymlink:
@@ -271,12 +231,7 @@ func convertInMessage(
 			Parent:    fuseops.InodeID(inMsg.Header().Nodeid),
 			Name:      string(newName),
 			Target:    string(target),
-			OpContext: fuseops.OpContext{
-				FuseID: inMsg.Header().Unique,
-				Pid:    inMsg.Header().Pid,
-				Uid:    inMsg.Header().Uid,
-				Gid:    inMsg.Header().Gid,
-			},
+			OpContext: fuseops.OpContext{Pid: inMsg.Header().Pid},
 		}
 
 	case fusekernel.OpRename:
@@ -318,12 +273,7 @@ func convertInMessage(
 			OldName:   string(oldName),
 			NewParent: fuseops.InodeID(in.Newdir),
 			NewName:   string(newName),
-			OpContext: fuseops.OpContext{
-				FuseID: inMsg.Header().Unique,
-				Pid:    inMsg.Header().Pid,
-				Uid:    inMsg.Header().Uid,
-				Gid:    inMsg.Header().Gid,
-			},
+			OpContext: fuseops.OpContext{Pid: inMsg.Header().Pid},
 		}
 
 	case fusekernel.OpUnlink:
@@ -336,12 +286,7 @@ func convertInMessage(
 		o = &fuseops.UnlinkOp{
 			Parent:    fuseops.InodeID(inMsg.Header().Nodeid),
 			Name:      string(buf[:n-1]),
-			OpContext: fuseops.OpContext{
-				FuseID: inMsg.Header().Unique,
-				Pid:    inMsg.Header().Pid,
-				Uid:    inMsg.Header().Uid,
-				Gid:    inMsg.Header().Gid,
-			},
+			OpContext: fuseops.OpContext{Pid: inMsg.Header().Pid},
 		}
 
 	case fusekernel.OpRmdir:
@@ -354,12 +299,7 @@ func convertInMessage(
 		o = &fuseops.RmDirOp{
 			Parent:    fuseops.InodeID(inMsg.Header().Nodeid),
 			Name:      string(buf[:n-1]),
-			OpContext: fuseops.OpContext{
-				FuseID: inMsg.Header().Unique,
-				Pid:    inMsg.Header().Pid,
-				Uid:    inMsg.Header().Uid,
-				Gid:    inMsg.Header().Gid,
-			},
+			OpContext: fuseops.OpContext{Pid: inMsg.Header().Pid},
 		}
 
 	case fusekernel.OpOpen:
@@ -372,23 +312,13 @@ func convertInMessage(
 		o = &fuseops.OpenFileOp{
 			Inode:     fuseops.InodeID(inMsg.Header().Nodeid),
 			OpenFlags: fusekernel.OpenFlags(in.Flags),
-			OpContext: fuseops.OpContext{
-				FuseID: inMsg.Header().Unique,
-				Pid:    inMsg.Header().Pid,
-				Uid:    inMsg.Header().Uid,
-				Gid:    inMsg.Header().Gid,
-			},
+			OpContext: fuseops.OpContext{Pid: inMsg.Header().Pid},
 		}
 
 	case fusekernel.OpOpendir:
 		o = &fuseops.OpenDirOp{
 			Inode:     fuseops.InodeID(inMsg.Header().Nodeid),
-			OpContext: fuseops.OpContext{
-				FuseID: inMsg.Header().Unique,
-				Pid:    inMsg.Header().Pid,
-				Uid:    inMsg.Header().Uid,
-				Gid:    inMsg.Header().Gid,
-			},
+			OpContext: fuseops.OpContext{Pid: inMsg.Header().Pid},
 		}
 
 	case fusekernel.OpRead:
@@ -402,12 +332,7 @@ func convertInMessage(
 			Handle:    fuseops.HandleID(in.Fh),
 			Offset:    int64(in.Offset),
 			Size:      int64(in.Size),
-			OpContext: fuseops.OpContext{
-				FuseID: inMsg.Header().Unique,
-				Pid:    inMsg.Header().Pid,
-				Uid:    inMsg.Header().Uid,
-				Gid:    inMsg.Header().Gid,
-			},
+			OpContext: fuseops.OpContext{Pid: inMsg.Header().Pid},
 		}
 		if !config.UseVectoredRead {
 			// Use part of the incoming message storage as the read buffer
@@ -429,12 +354,7 @@ func convertInMessage(
 			Handle:    fuseops.HandleID(in.Fh),
 			Offset:    fuseops.DirOffset(in.Offset),
 			Plus:      inMsg.Header().Opcode == fusekernel.OpReaddirplus,
-			OpContext: fuseops.OpContext{
-				FuseID: inMsg.Header().Unique,
-				Pid:    inMsg.Header().Pid,
-				Uid:    inMsg.Header().Uid,
-				Gid:    inMsg.Header().Gid,
-			},
+			OpContext: fuseops.OpContext{Pid: inMsg.Header().Pid},
 		}
 		o = to
 
@@ -458,12 +378,7 @@ func convertInMessage(
 
 		o = &fuseops.ReleaseFileHandleOp{
 			Handle:    fuseops.HandleID(in.Fh),
-			OpContext: fuseops.OpContext{
-				FuseID: inMsg.Header().Unique,
-				Pid:    inMsg.Header().Pid,
-				Uid:    inMsg.Header().Uid,
-				Gid:    inMsg.Header().Gid,
-			},
+			OpContext: fuseops.OpContext{Pid: inMsg.Header().Pid},
 		}
 
 	case fusekernel.OpReleasedir:
@@ -475,12 +390,7 @@ func convertInMessage(
 
 		o = &fuseops.ReleaseDirHandleOp{
 			Handle:    fuseops.HandleID(in.Fh),
-			OpContext: fuseops.OpContext{
-				FuseID: inMsg.Header().Unique,
-				Pid:    inMsg.Header().Pid,
-				Uid:    inMsg.Header().Uid,
-				Gid:    inMsg.Header().Gid,
-			},
+			OpContext: fuseops.OpContext{Pid: inMsg.Header().Pid},
 		}
 
 	case fusekernel.OpWrite:
@@ -499,41 +409,19 @@ func convertInMessage(
 			Handle:    fuseops.HandleID(in.Fh),
 			Data:      buf,
 			Offset:    int64(in.Offset),
-			OpContext: fuseops.OpContext{
-				FuseID: inMsg.Header().Unique,
-				Pid:    inMsg.Header().Pid,
-				Uid:    inMsg.Header().Uid,
-				Gid:    inMsg.Header().Gid,
-			},
+			OpContext: fuseops.OpContext{Pid: inMsg.Header().Pid},
 		}
 
 	case fusekernel.OpFsync, fusekernel.OpFsyncdir:
 		type input fusekernel.FsyncIn
 		in := (*input)(inMsg.Consume(unsafe.Sizeof(input{})))
 		if in == nil {
-			return nil, errors.New("Corrupt OpFsync/OpFsyncdir")
+			return nil, errors.New("Corrupt OpFsync")
 		}
 
 		o = &fuseops.SyncFileOp{
 			Inode:     fuseops.InodeID(inMsg.Header().Nodeid),
 			Handle:    fuseops.HandleID(in.Fh),
-			OpContext: fuseops.OpContext{
-				FuseID: inMsg.Header().Unique,
-				Pid:    inMsg.Header().Pid,
-				Uid:    inMsg.Header().Uid,
-				Gid:    inMsg.Header().Gid,
-			},
-		}
-
-	case fusekernel.OpSyncFS:
-		type input fusekernel.SyncFSIn
-		in := (*input)(inMsg.Consume(unsafe.Sizeof(input{})))
-		if in == nil {
-			return nil, errors.New("Corrupt OpSyncFS")
-		}
-
-		o = &fuseops.SyncFSOp{
-			Inode:     fuseops.InodeID(inMsg.Header().Nodeid),
 			OpContext: fuseops.OpContext{Pid: inMsg.Header().Pid},
 		}
 
@@ -547,23 +435,13 @@ func convertInMessage(
 		o = &fuseops.FlushFileOp{
 			Inode:     fuseops.InodeID(inMsg.Header().Nodeid),
 			Handle:    fuseops.HandleID(in.Fh),
-			OpContext: fuseops.OpContext{
-				FuseID: inMsg.Header().Unique,
-				Pid:    inMsg.Header().Pid,
-				Uid:    inMsg.Header().Uid,
-				Gid:    inMsg.Header().Gid,
-			},
+			OpContext: fuseops.OpContext{Pid: inMsg.Header().Pid},
 		}
 
 	case fusekernel.OpReadlink:
 		o = &fuseops.ReadSymlinkOp{
 			Inode:     fuseops.InodeID(inMsg.Header().Nodeid),
-			OpContext: fuseops.OpContext{
-				FuseID: inMsg.Header().Unique,
-				Pid:    inMsg.Header().Pid,
-				Uid:    inMsg.Header().Uid,
-				Gid:    inMsg.Header().Gid,
-			},
+			OpContext: fuseops.OpContext{Pid: inMsg.Header().Pid},
 		}
 
 	case fusekernel.OpStatfs:
@@ -614,12 +492,7 @@ func convertInMessage(
 			Parent:    fuseops.InodeID(inMsg.Header().Nodeid),
 			Name:      string(name),
 			Target:    fuseops.InodeID(in.Oldnodeid),
-			OpContext: fuseops.OpContext{
-				FuseID: inMsg.Header().Unique,
-				Pid:    inMsg.Header().Pid,
-				Uid:    inMsg.Header().Uid,
-				Gid:    inMsg.Header().Gid,
-			},
+			OpContext: fuseops.OpContext{Pid: inMsg.Header().Pid},
 		}
 
 	case fusekernel.OpRemovexattr:
@@ -632,12 +505,7 @@ func convertInMessage(
 		o = &fuseops.RemoveXattrOp{
 			Inode:     fuseops.InodeID(inMsg.Header().Nodeid),
 			Name:      string(buf[:n-1]),
-			OpContext: fuseops.OpContext{
-				FuseID: inMsg.Header().Unique,
-				Pid:    inMsg.Header().Pid,
-				Uid:    inMsg.Header().Uid,
-				Gid:    inMsg.Header().Gid,
-			},
+			OpContext: fuseops.OpContext{Pid: inMsg.Header().Pid},
 		}
 
 	case fusekernel.OpGetxattr:
@@ -657,12 +525,7 @@ func convertInMessage(
 		to := &fuseops.GetXattrOp{
 			Inode:     fuseops.InodeID(inMsg.Header().Nodeid),
 			Name:      string(name),
-			OpContext: fuseops.OpContext{
-				FuseID: inMsg.Header().Unique,
-				Pid:    inMsg.Header().Pid,
-				Uid:    inMsg.Header().Uid,
-				Gid:    inMsg.Header().Gid,
-			},
+			OpContext: fuseops.OpContext{Pid: inMsg.Header().Pid},
 		}
 		o = to
 
@@ -690,12 +553,7 @@ func convertInMessage(
 
 		to := &fuseops.ListXattrOp{
 			Inode:     fuseops.InodeID(inMsg.Header().Nodeid),
-			OpContext: fuseops.OpContext{
-				FuseID: inMsg.Header().Unique,
-				Pid:    inMsg.Header().Pid,
-				Uid:    inMsg.Header().Uid,
-				Gid:    inMsg.Header().Gid,
-			},
+			OpContext: fuseops.OpContext{Pid: inMsg.Header().Pid},
 		}
 		o = to
 
@@ -734,12 +592,7 @@ func convertInMessage(
 			Name:      string(name),
 			Value:     value,
 			Flags:     in.Flags,
-			OpContext: fuseops.OpContext{
-				FuseID: inMsg.Header().Unique,
-				Pid:    inMsg.Header().Pid,
-				Uid:    inMsg.Header().Uid,
-				Gid:    inMsg.Header().Gid,
-			},
+			OpContext: fuseops.OpContext{Pid: inMsg.Header().Pid},
 		}
 	case fusekernel.OpFallocate:
 		type input fusekernel.FallocateIn
@@ -754,12 +607,7 @@ func convertInMessage(
 			Offset:    in.Offset,
 			Length:    in.Length,
 			Mode:      in.Mode,
-			OpContext: fuseops.OpContext{
-				FuseID: inMsg.Header().Unique,
-				Pid:    inMsg.Header().Pid,
-				Uid:    inMsg.Header().Uid,
-				Gid:    inMsg.Header().Gid,
-			},
+			OpContext: fuseops.OpContext{Pid: inMsg.Header().Pid},
 		}
 
 	case fusekernel.OpPoll:
@@ -935,14 +783,6 @@ func (c *Connection) kernelResponseForOp(
 		out := (*fusekernel.OpenOut)(m.Grow(int(unsafe.Sizeof(fusekernel.OpenOut{}))))
 		out.Fh = uint64(o.Handle)
 
-		if o.CacheDir {
-			out.OpenFlags |= uint32(fusekernel.OpenCacheDir)
-		}
-
-		if o.KeepCache {
-			out.OpenFlags |= uint32(fusekernel.OpenKeepCache)
-		}
-
 	case *fuseops.ReadDirOp:
 		// convertInMessage already set up the destination buffer to be at the end
 		// of the out message. We need only shrink to the right size based on how
@@ -997,7 +837,7 @@ func (c *Connection) kernelResponseForOp(
 		out.St.Ffree = o.InodesFree
 		out.St.Namelen = 255
 
-		// The posix spec for sys/statvfs.h (https://tinyurl.com/2juj6ah6) defines the
+		// The posix spec for sys/statvfs.h (http://goo.gl/LktgrF) defines the
 		// following fields of statvfs, among others:
 		//
 		//     f_bsize    File system block size.
@@ -1007,7 +847,7 @@ func (c *Connection) kernelResponseForOp(
 		// It appears as though f_bsize was the only thing supported by most unixes
 		// originally, but then f_frsize was added when new sorts of file systems
 		// came about. Quoth The Linux Programming Interface by Michael Kerrisk
-		// (https://tinyurl.com/5n8mjtws):
+		// (https://goo.gl/5LZMxQ):
 		//
 		//     For most Linux file systems, the values of f_bsize and f_frsize are
 		//     the same. However, some file systems support the notion of block
@@ -1051,9 +891,6 @@ func (c *Connection) kernelResponseForOp(
 	case *fuseops.FallocateOp:
 		// Empty response
 
-	case *fuseops.SyncFSOp:
-		// Empty response
-
 	case *initOp:
 		out := (*fusekernel.InitOut)(m.Grow(int(unsafe.Sizeof(fusekernel.InitOut{}))))
 

debug.go

@@ -115,9 +115,6 @@ func describeRequest(op interface{}) (s string) {
 		addComponent("offset %d", typed.Offset)
 		addComponent("length %d", typed.Length)
 		addComponent("mode %d", typed.Mode)
-
-	case *fuseops.ReleaseFileHandleOp:
-		addComponent("handle %d", typed.Handle)
 	}
 
 	// Use just the name if there is no extra info.
@@ -144,10 +141,6 @@ func describeResponse(op interface{}) string {
 			addComponent("inode %v", entry.Child)
 		}
 	}
-	switch typed := op.(type) {
-	case *fuseops.OpenFileOp:
-		addComponent("handle %d", typed.Handle)
-	}
 
-	return fmt.Sprintf("%s (%s)", opName(op), strings.Join(components, ", "))
+	return fmt.Sprintf("%s", strings.Join(components, ", "))
 }

fuseops/conv.go

@@ -49,7 +49,7 @@ func ConvertAttributes(
 	out.Blocks = (in.Size + 512 - 1) / 512
 
 	// Set the mode.
-	out.Mode = ConvertGoMode(in.Mode)
+	out.Mode = ConvertGolangMode(in.Mode)
 
 	if out.Mode & (syscall.S_IFCHR | syscall.S_IFBLK) != 0 {
 		out.Rdev = in.Rdev
@@ -60,10 +60,9 @@ func ConvertAttributes(
 // consumption by the fuse kernel module.
 func ConvertExpirationTime(t time.Time) (secs uint64, nsecs uint32) {
 	// Fuse represents durations as unsigned 64-bit counts of seconds and 32-bit
-	// counts of nanoseconds (https://tinyurl.com/4muvkr6k). So negative
-	// durations are right out. There is no need to cap the positive magnitude,
-	// because 2^64 seconds is well longer than the 2^63 ns range of
-	// time.Duration.
+	// counts of nanoseconds (cf. http://goo.gl/EJupJV). So negative durations
+	// are right out. There is no need to cap the positive magnitude, because
+	// 2^64 seconds is well longer than the 2^63 ns range of time.Duration.
 	d := t.Sub(time.Now())
 	if d > 0 {
 		secs = uint64(d / time.Second)

fuseops/filemode.go

@@ -5,8 +5,6 @@ import (
 	"syscall"
 )
 
-// ConvertFileMode returns an os.FileMode with the Go mode and permission bits
-// set according to the Linux mode and permission bits.
 func ConvertFileMode(unixMode uint32) os.FileMode {
 	mode := os.FileMode(unixMode & 0777)
 	switch unixMode & syscall.S_IFMT {
@@ -39,9 +37,7 @@ func ConvertFileMode(unixMode uint32) os.FileMode {
 	return mode
 }
 
-// ConvertGoMode returns an integer with the Linux mode and permission bits
-// set according to the Go mode and permission bits.
-func ConvertGoMode(inMode os.FileMode) uint32 {
+func ConvertGolangMode(inMode os.FileMode) uint32 {
 	outMode := uint32(inMode) & 0777
 	switch {
 	default:

fuseops/ops.go

@@ -28,35 +28,25 @@ import (
 // OpContext contains extra context that may be needed by some file systems.
 // See https://libfuse.github.io/doxygen/structfuse__context.html as a reference.
 type OpContext struct {
-	// FuseID is the Unique identifier for each operation from the kernel.
-	FuseID uint64
-
 	// PID of the process that is invoking the operation.
 	// Not filled in case of a writepage operation.
 	Pid uint32
-
-	// UID of the process that is invoking the operation.
-	// Not filled in case of a writepage operation.
-	Uid uint32
-
-	// GID of the process that is invoking the operation.
-	// Not filled in case of a writepage operation.
-	Gid uint32
 }
 
 // Return statistics about the file system's capacity and available resources.
 //
 // Called by statfs(2) and friends:
 //
-//   - (https://tinyurl.com/234ppacj) sys_statfs called user_statfs, which calls
+//   - (https://goo.gl/Xi1lDr) sys_statfs called user_statfs, which calls
 //     vfs_statfs, which calls statfs_by_dentry.
 //
-//   - (https://tinyurl.com/u6keadjz) statfs_by_dentry calls the superblock
+//   - (https://goo.gl/VAIOwU) statfs_by_dentry calls the superblock
 //     operation statfs, which in our case points at
-//     fuse_statfs (https://tinyurl.com/mr45wd28)
+//     fuse_statfs (cf. https://goo.gl/L7BTM3)
 //
-//   - (https://tinyurl.com/3wt3dw3c) fuse_statfs sends a statfs op, then uses
-//     convert_fuse_statfs to convert the response in a straightforward manner.
+//   - (https://goo.gl/Zn7Sgl) fuse_statfs sends a statfs op, then uses
+//     convert_fuse_statfs to convert the response in a straightforward
+//     manner.
 //
 // This op is particularly important on OS X: if you don't implement it, the
 // file system will not successfully mount. If you don't model a sane amount of
@@ -67,15 +57,15 @@ type StatFSOp struct {
 	// system's capacity and space availability.
 	//
 	// On Linux this is surfaced as statfs::f_frsize, matching the posix standard
-	// (https://tinyurl.com/2juj6ah6), which says that f_blocks and friends are
-	// in units of f_frsize. On OS X this is surfaced as statfs::f_bsize, which
-	// plays the same roll.
+	// (http://goo.gl/LktgrF), which says that f_blocks and friends are in units
+	// of f_frsize. On OS X this is surfaced as statfs::f_bsize, which plays the
+	// same roll.
 	//
 	// It appears as though the original intent of statvfs::f_frsize in the posix
 	// standard was to support a smaller addressable unit than statvfs::f_bsize
 	// (cf. The Linux Programming Interface by Michael Kerrisk,
-	// https://tinyurl.com/5n8mjtws). Therefore users should probably arrange for
-	// this to be no larger than IoSize.
+	// https://goo.gl/5LZMxQ). Therefore users should probably arrange for this
+	// to be no larger than IoSize.
 	//
 	// On Linux this can be any value, and will be faithfully returned to the
 	// caller of statfs(2) (see the code walk above). On OS X it appears that
@@ -193,22 +183,20 @@ type SetInodeAttributesOp struct {
 // contain a note of this (but see also the note about the root inode below).
 // For example, LookUpInodeOp and MkDirOp. The authoritative source is the
 // libfuse documentation, which states that any op that returns
-// fuse_reply_entry fuse_reply_create implicitly increments
-// (https://tinyurl.com/2xd5zssm).
+// fuse_reply_entry fuse_reply_create implicitly increments (cf.
+// http://goo.gl/o5C7Dx).
 //
 // If the reference count hits zero, the file system can forget about that ID
 // entirely, and even re-use it in future responses. The kernel guarantees that
 // it will not otherwise use it again.
 //
 // The reference count corresponds to fuse_inode::nlookup
-// (https://tinyurl.com/ycka69ck). Some examples of where the kernel
-// manipulates it:
+// (http://goo.gl/ut48S4). Some examples of where the kernel manipulates it:
 //
-//   - (https://tinyurl.com/s8dz2ays) Any caller to fuse_iget increases the
-//     count.
-//   - (https://tinyurl.com/mu37ceua) fuse_lookup_name calls fuse_iget.
-//   - (https://tinyurl.com/2nyhhnsh) fuse_create_open calls fuse_iget.
-//   - (https://tinyurl.com/mnjpu3a9) fuse_dentry_revalidate increments after
+//   - (http://goo.gl/vPD9Oh) Any caller to fuse_iget increases the count.
+//   - (http://goo.gl/B6tTTC) fuse_lookup_name calls fuse_iget.
+//   - (http://goo.gl/IlcxWv) fuse_create_open calls fuse_iget.
+//   - (http://goo.gl/VQMQul) fuse_dentry_revalidate increments after
 //     revalidating.
 //
 // In contrast to all other inodes, RootInodeID begins with an implicit
@@ -216,13 +204,12 @@ type SetInodeAttributesOp struct {
 // could be no such op, because the root cannot be referred to by name.) Code
 // walk:
 //
-//   - (https://tinyurl.com/yf8m2drx) fuse_fill_super calls
-//     fuse_get_root_inode.
+//   - (http://goo.gl/gWAheU) fuse_fill_super calls fuse_get_root_inode.
 //
-//   - (https://tinyurl.com/35f86asu) fuse_get_root_inode calls fuse_iget
-//     without sending any particular request.
+//   - (http://goo.gl/AoLsbb) fuse_get_root_inode calls fuse_iget without
+//     sending any particular request.
 //
-//   - (https://tinyurl.com/s8dz2ays) fuse_iget increments nlookup.
+//   - (http://goo.gl/vPD9Oh) fuse_iget increments nlookup.
 //
 // File systems should tolerate but not rely on receiving forget ops for
 // remaining inodes when the file system unmounts, including the root inode.
@@ -272,11 +259,10 @@ type BatchForgetOp struct {
 //
 // The Linux kernel appears to verify the name doesn't already exist (mkdir
 // calls mkdirat calls user_path_create calls filename_create, which verifies:
-// https://tinyurl.com/24yw46mf). Indeed, the tests in samples/memfs that call
-// in parallel appear to bear this out. But osxfuse does not appear to
-// guarantee this (https://tinyurl.com/22587hcf). And if names may be created
-// outside of the kernel's control, it doesn't matter what the kernel does
-// anyway.
+// http://goo.gl/FZpLu5). Indeed, the tests in samples/memfs that call in
+// parallel appear to bear this out. But osxfuse does not appear to guarantee
+// this (cf. https://goo.gl/PqzZDv). And if names may be created outside of the
+// kernel's control, it doesn't matter what the kernel does anyway.
 //
 // Therefore the file system should return EEXIST if the name already exists.
 type MkDirOp struct {
@@ -297,14 +283,14 @@ type MkDirOp struct {
 
 // Create a file inode as a child of an existing directory inode. The kernel
 // sends this in response to a mknod(2) call. It may also send it in special
-// cases such as an NFS export (https://tinyurl.com/5dwxr7c9). It is more typical
+// cases such as an NFS export (cf. https://goo.gl/HiLfnK). It is more typical
 // to see CreateFileOp, which is received for an open(2) that creates a file.
 //
 // The Linux kernel appears to verify the name doesn't already exist (mknod
 // calls sys_mknodat calls user_path_create calls filename_create, which
-// verifies: https://tinyurl.com/24yw46mf). But osxfuse may not guarantee this,
-// as with mkdir(2). And if names may be created outside of the kernel's
-// control, it doesn't matter what the kernel does anyway.
+// verifies: http://goo.gl/FZpLu5). But osxfuse may not guarantee this, as with
+// mkdir(2). And if names may be created outside of the kernel's control, it
+// doesn't matter what the kernel does anyway.
 //
 // Therefore the file system should return EEXIST if the name already exists.
 type MkNodeOp struct {
@@ -330,10 +316,10 @@ type MkNodeOp struct {
 //
 // The kernel sends this when the user asks to open a file with the O_CREAT
 // flag and the kernel has observed that the file doesn't exist. (See for
-// example lookup_open, https://tinyurl.com/49899mvb). However, osxfuse doesn't
-// appear to make this check atomically (https://tinyurl.com/22587hcf). And if
-// names may be created outside of the kernel's control, it doesn't matter what
-// the kernel does anyway.
+// example lookup_open, http://goo.gl/PlqE9d). However, osxfuse doesn't appear
+// to make this check atomically (cf. https://goo.gl/PqzZDv). And if names may
+// be created outside of the kernel's control, it doesn't matter what the
+// kernel does anyway.
 //
 // Therefore the file system should return EEXIST if the name already exists.
 type CreateFileOp struct {
@@ -411,8 +397,8 @@ type CreateLinkOp struct {
 // Rename a file or directory, given the IDs of the original parent directory
 // and the new one (which may be the same).
 //
-// In Linux, this is called by vfs_rename (https://tinyurl.com/2xbx9kr2), which
-// is called by sys_renameat2 (https://tinyurl.com/4zyak2kt).
+// In Linux, this is called by vfs_rename (https://goo.gl/eERItT), which is
+// called by sys_renameat2 (https://goo.gl/fCC9qC).
 //
 // The kernel takes care of ensuring that the source and destination are not
 // identical (in which case it does nothing), that the rename is not across
@@ -421,7 +407,7 @@ type CreateLinkOp struct {
 //
 //   - If the new name is an existing directory, the file system must ensure it
 //     is empty before replacing it, returning ENOTEMPTY otherwise. (This is
-//     per the posix spec: https://tinyurl.com/5n865nx9)
+//     per the posix spec: http://goo.gl/4XtT79)
 //
 //   - The rename must be atomic from the point of view of an observer of the
 //     new name. That is, if the new name already exists, there must be no
@@ -429,9 +415,9 @@ type CreateLinkOp struct {
 //
 //   - It is okay for the new name to be modified before the old name is
 //     removed; these need not be atomic. In fact, the Linux man page
-//     explicitly says this is likely (https://tinyurl.com/mdpbpjmr).
+//     explicitly says this is likely (cf. https://goo.gl/Y1wVZc).
 //
-//   - Linux bends over backwards (https://tinyurl.com/3hmt7puy) to ensure that
+//   - Linux bends over backwards (https://goo.gl/pLDn3r) to ensure that
 //     neither the old nor the new parent can be concurrently modified. But
 //     it's not clear whether OS X does this, and in any case it doesn't matter
 //     for file systems that may be modified remotely. Therefore a careful file
@@ -460,7 +446,7 @@ type RenameOp struct {
 //
 // The file system is responsible for checking that the directory is empty.
 //
-// Sample implementation in ext2: ext2_rmdir (https://tinyurl.com/bajkpcf9)
+// Sample implementation in ext2: ext2_rmdir (http://goo.gl/B9QmFf)
 type RmDirOp struct {
 	// The ID of parent directory inode, and the name of the directory being
 	// removed within it.
@@ -474,7 +460,7 @@ type RmDirOp struct {
 // ForgetInodeOp. It may still be referenced before then if a user still has
 // the file open.
 //
-// Sample implementation in ext2: ext2_unlink (https://tinyurl.com/3wpwedcp)
+// Sample implementation in ext2: ext2_unlink (http://goo.gl/hY6r6C)
 type UnlinkOp struct {
 	// The ID of parent directory inode, and the name of the entry being removed
 	// within it.
@@ -507,14 +493,6 @@ type OpenDirOp struct {
 	// a later call to ReleaseDirHandle.
 	Handle    HandleID
 	OpContext OpContext
-
-	// CacheDir conveys to the kernel to cache the response of next
-	// ReadDirOp as page cache. Once cached, listing on that directory will be
-	// served from the kernel until invalidated.
-	CacheDir bool
-
-	// KeepCache instructs the kernel to not invalidate the data cache on open calls.
-	KeepCache bool
 }
 
 // Read entries from a directory previously opened with OpenDir.
@@ -534,51 +512,47 @@ type ReadDirOp struct {
 	// at zero and is set by llseek and by the final consumed result returned by
 	// each call to ReadDir:
 	//
-	//  *  (https://tinyurl.com/3ueykmaj) iterate_dir, which is called by
-	//     getdents(2) and readdir(2), sets dir_context::pos to file::f_pos
-	//     before calling f_op->iterate, and then does the opposite assignment
-	//     afterward.
+	//  *  (http://goo.gl/2nWJPL) iterate_dir, which is called by getdents(2) and
+	//     readdir(2), sets dir_context::pos to file::f_pos before calling
+	//     f_op->iterate, and then does the opposite assignment afterward.
 	//
-	//  *  (https://tinyurl.com/a8urhfy9) fuse_readdir, which implements iterate
-	//     for fuse directories, passes dir_context::pos as the offset to
-	//     fuse_read_fill, which passes it on to user-space. fuse_readdir later
-	//     calls parse_dirfile with the same context.
+	//  *  (http://goo.gl/rTQVSL) fuse_readdir, which implements iterate for fuse
+	//     directories, passes dir_context::pos as the offset to fuse_read_fill,
+	//     which passes it on to user-space. fuse_readdir later calls
+	//     parse_dirfile with the same context.
 	//
-	//  *  (https://tinyurl.com/5cev5fn4) For each returned result (except
-	//     perhaps the last, which may be truncated by the page boundary),
-	//     parse_dirfile updates dir_context::pos with fuse_dirent::off.
+	//  *  (http://goo.gl/vU5ukv) For each returned result (except perhaps the
+	//     last, which may be truncated by the page boundary), parse_dirfile
+	//     updates dir_context::pos with fuse_dirent::off.
 	//
 	// It is affected by the Posix directory stream interfaces in the following
 	// manner:
 	//
-	//  *  (https://tinyurl.com/2pjv5jvz, https://tinyurl.com/2r6h4mkj) opendir
-	//     initially causes filepos to be set to zero.
+	//  *  (http://goo.gl/fQhbyn, http://goo.gl/ns1kDF) opendir initially causes
+	//     filepos to be set to zero.
 	//
-	//  *  (https://tinyurl.com/2yvcbcpv, https://tinyurl.com/bddezwp4) readdir
-	//     allows the user to iterate through the directory one entry at a time.
-	//     As each entry is consumed, its d_off field is stored in
-	//     __dirstream::filepos.
+	//  *  (http://goo.gl/ezNKyR, http://goo.gl/xOmDv0) readdir allows the user
+	//     to iterate through the directory one entry at a time. As each entry is
+	//     consumed, its d_off field is stored in __dirstream::filepos.
 	//
-	//  *  (https://tinyurl.com/2pfbfe9v, https://tinyurl.com/4wtat58a) telldir
-	//     allows the user to obtain the d_off field from the most recently
-	//     returned entry.
+	//  *  (http://goo.gl/WEOXG8, http://goo.gl/rjSXl3) telldir allows the user
+	//     to obtain the d_off field from the most recently returned entry.
 	//
-	//  *  (https://tinyurl.com/bdynryef, https://tinyurl.com/4hysrnb8) seekdir
-	//     allows the user to seek backward to an offset previously returned by
-	//     telldir. It stores the new offset in filepos, and calls llseek to
-	//     update the kernel's struct file.
+	//  *  (http://goo.gl/WG3nDZ, http://goo.gl/Lp0U6W) seekdir allows the user
+	//     to seek backward to an offset previously returned by telldir. It
+	//     stores the new offset in filepos, and calls llseek to update the
+	//     kernel's struct file.
 	//
-	//  *  (https://tinyurl.com/5n8dkb44, https://tinyurl.com/3jnn5nnn) rewinddir
-	//     allows the user to go back to the beginning of the directory,
-	//     obtaining a fresh view. It updates filepos and calls llseek to update
-	//     the kernel's struct file.
+	//  *  (http://goo.gl/gONQhz, http://goo.gl/VlrQkc) rewinddir allows the user
+	//     to go back to the beginning of the directory, obtaining a fresh view.
+	//     It updates filepos and calls llseek to update the kernel's struct
+	//     file.
 	//
 	// Unfortunately, FUSE offers no way to intercept seeks
-	// (https://tinyurl.com/4bm2sfjd), so there is no way to cause seekdir or
-	// rewinddir to fail. Additionally, there is no way to distinguish an
-	// explicit rewinddir followed by readdir from the initial readdir, or a
-	// rewinddir from a seekdir to the value returned by telldir just after
-	// opendir.
+	// (http://goo.gl/H6gEXa), so there is no way to cause seekdir or rewinddir
+	// to fail. Additionally, there is no way to distinguish an explicit
+	// rewinddir followed by readdir from the initial readdir, or a rewinddir
+	// from a seekdir to the value returned by telldir just after opendir.
 	//
 	// Luckily, Posix is vague about what the user will see if they seek
 	// backwards, and requires the user not to seek to an old offset after a
@@ -597,9 +571,9 @@ type ReadDirOp struct {
 	// The destination buffer, whose length gives the size of the read.
 	//
 	// The output data should consist of a sequence of FUSE directory entries in
-	// the format generated by fuse_add_direntry (https://tinyurl.com/3r9t7d2p),
-	// which is consumed by parse_dirfile (https://tinyurl.com/bevwty74). Use
-	// fuseutil.WriteDirent or fuseutil.WriteDirentPlus to generate this data.
+	// the format generated by fuse_add_direntry (http://goo.gl/qCcHCV), which is
+	// consumed by parse_dirfile (http://goo.gl/2WUmD2). Use fuseutil.WriteDirent
+	// or fuseutil.WriteDirentPlus to generate this data.
 	//
 	// Each entry returned exposes a directory offset to the user that may later
 	// show up in ReadDirRequest.Offset. See notes on that field for more
@@ -612,10 +586,10 @@ type ReadDirOp struct {
 	// entries available or the final entry would not fit.
 	//
 	// Zero means that the end of the directory has been reached. This is
-	// unambiguous because NAME_MAX (https://tinyurl.com/4r2b68jp) plus the size
-	// of fuse_dirent (https://tinyurl.com/mp43bu8) plus the 8-byte alignment of
-	// FUSE_DIRENT_ALIGN (https://tinyurl.com/3m3ewu7h) is less than the read
-	// size of PAGE_SIZE used by fuse_readdir (https://tinyurl.com/mrwxsfxw).
+	// unambiguous because NAME_MAX (https://goo.gl/ZxzKaE) plus the size of
+	// fuse_dirent (https://goo.gl/WO8s3F) plus the 8-byte alignment of
+	// FUSE_DIRENT_ALIGN (http://goo.gl/UziWvH) is less than the read size of
+	// PAGE_SIZE used by fuse_readdir (cf. https://goo.gl/VajtS2).
 	BytesRead int
 	OpContext OpContext
 }
@@ -627,8 +601,7 @@ type ReadDirOp struct {
 // The kernel guarantees that the handle ID will not be used in further ops
 // sent to the file system (unless it is reissued by the file system).
 //
-// Errors from this op are ignored by the kernel
-// (https://tinyurl.com/2aaccyzk).
+// Errors from this op are ignored by the kernel (cf. http://goo.gl/RL38Do).
 type ReleaseDirHandleOp struct {
 	// The handle ID to be released. The kernel guarantees that this ID will not
 	// be used in further calls to the file system (unless it is reissued by the
@@ -661,15 +634,15 @@ type OpenFileOp struct {
 	Handle HandleID
 
 	// By default, fuse invalidates the kernel's page cache for an inode when a
-	// new file handle is opened for that inode (https://tinyurl.com/yyb497zy).
-	// The intent appears to be to allow users to "see" content that has changed
+	// new file handle is opened for that inode (cf. https://goo.gl/2rZ9uk). The
+	// intent appears to be to allow users to "see" content that has changed
 	// remotely on a networked file system by re-opening the file.
 	//
 	// For file systems where this is not a concern because all modifications for
 	// a particular inode go through the kernel, set this field to true to
 	// disable this behavior.
 	//
-	// (More discussion: https://tinyurl.com/4znxvzwh)
+	// (More discussion: http://goo.gl/cafzWF)
 	//
 	// Note that on OS X it appears that the behavior is always as if this field
 	// is set to true, regardless of its value, at least for files opened in the
@@ -718,21 +691,15 @@ type ReadFileOp struct {
 	// Set by the file system: the number of bytes read.
 	//
 	// The FUSE documentation requires that exactly the requested number of bytes
-	// be returned, except in the case of EOF or error
-	// (https://tinyurl.com/2mzewn35). This appears to be because it uses file
-	// mmapping machinery (https://tinyurl.com/avxy3dvm) to read a page at a
-	// time. It appears to understand where EOF is by checking the inode size
-	// (https://tinyurl.com/2eteerzt), returned by a previous call to
-	// LookUpInode, GetInodeAttributes, etc.
+	// be returned, except in the case of EOF or error (http://goo.gl/ZgfBkF).
+	// This appears to be because it uses file mmapping machinery
+	// (http://goo.gl/SGxnaN) to read a page at a time. It appears to understand
+	// where EOF is by checking the inode size (http://goo.gl/0BkqKD), returned
+	// by a previous call to LookUpInode, GetInodeAttributes, etc.
 	//
 	// If direct IO is enabled, semantics should match those of read(2).
 	BytesRead int
 	OpContext OpContext
-
-	// If set, this function will be invoked after the operation response has been
-	// sent to the kernel and before the buffers containing the response data are
-	// freed.
-	Callback func()
 }
 
 // Write data to a file previously opened with CreateFile or OpenFile.
@@ -742,22 +709,21 @@ type ReadFileOp struct {
 // page via the FUSE VFS layer, causing this op to be sent:
 //
 //   - The kernel calls address_space_operations::writepage when a dirty page
-//     needs to be written to backing store (https://tinyurl.com/yck2sf5u).
-//     Fuse sets this to fuse_writepage (https://tinyurl.com/5n989f8p).
+//     needs to be written to backing store (cf. http://goo.gl/Ezbewg). Fuse
+//     sets this to fuse_writepage (cf. http://goo.gl/IeNvLT).
 //
-//   - (https://tinyurl.com/mvn6zv3j) fuse_writepage calls
-//     fuse_writepage_locked.
+//   - (http://goo.gl/Eestuy) fuse_writepage calls fuse_writepage_locked.
 //
-//   - (https://tinyurl.com/2wn8scwb) fuse_writepage_locked makes a write
-//     request to the userspace server.
+//   - (http://goo.gl/RqYIxY) fuse_writepage_locked makes a write request to
+//     the userspace server.
 //
 // Note that the kernel *will* ensure that writes are received and acknowledged
 // by the file system before sending a FlushFileOp when closing the file
 // descriptor to which they were written. Cf. the notes on
 // fuse.MountConfig.DisableWritebackCaching.
 //
-// (See also https://tinyurl.com/5dchkdtx, fuse-devel thread "Fuse guarantees
-// on concurrent requests".)
+// (See also http://goo.gl/ocdTdM, fuse-devel thread "Fuse guarantees on
+// concurrent requests".)
 type WriteFileOp struct {
 	// The file inode that we are modifying, and the handle previously returned
 	// by CreateFile or OpenFile when opening that inode.
@@ -789,9 +755,9 @@ type WriteFileOp struct {
 	// The data to write.
 	//
 	// The FUSE documentation requires that exactly the number of bytes supplied
-	// be written, except on error (https://tinyurl.com/yuruk5tx). This appears
-	// to be because it uses file mmapping machinery
-	// (https://tinyurl.com/avxy3dvm) to write a page at a time.
+	// be written, except on error (http://goo.gl/KUpwwn). This appears to be
+	// because it uses file mmapping machinery (http://goo.gl/SGxnaN) to write a
+	// page at a time.
 	Data []byte
 
 	// Set by the file system: "no reuse" flag.
@@ -805,25 +771,20 @@ type WriteFileOp struct {
 	SuppressReuse bool
 
 	OpContext OpContext
-
-	// If set, this function will be invoked after the operation response has been
-	// sent to the kernel and before the buffers containing the response data are
-	// freed.
-	Callback func()
 }
 
 // Synchronize the current contents of an open file to storage.
 //
 // vfs.txt documents this as being called for by the fsync(2) system call
-// (https://tinyurl.com/y2kdrfzw). Code walk for that case:
+// (cf. http://goo.gl/j9X8nB). Code walk for that case:
 //
-//   - (https://tinyurl.com/2s44cefz) sys_fsync calls do_fsync, calls
-//     vfs_fsync, calls vfs_fsync_range.
+//   - (http://goo.gl/IQkWZa) sys_fsync calls do_fsync, calls vfs_fsync, calls
+//     vfs_fsync_range.
 //
-//   - (https://tinyurl.com/bdhhfam5) vfs_fsync_range calls f_op->fsync.
+//   - (http://goo.gl/5L2SMy) vfs_fsync_range calls f_op->fsync.
 //
-// Note that this is also sent by fdatasync(2) (https://tinyurl.com/ja5wtszf),
-// and may be sent for msync(2) with the MS_SYNC flag (see the notes on
+// Note that this is also sent by fdatasync(2) (cf. http://goo.gl/01R7rF), and
+// may be sent for msync(2) with the MS_SYNC flag (see the notes on
 // FlushFileOp).
 //
 // See also: FlushFileOp, which may perform a similar function when closing a
@@ -838,42 +799,39 @@ type SyncFileOp struct {
 // Flush the current state of an open file to storage upon closing a file
 // descriptor.
 //
-// vfs.txt documents this as being sent for each close(2) system call
-// (https://tinyurl.com/r4ujfxkc). Code walk for that case:
+// vfs.txt documents this as being sent for each close(2) system call (cf.
+// http://goo.gl/FSkbrq). Code walk for that case:
 //
-//   - (https://tinyurl.com/2kzyyjcu) sys_close calls __close_fd, calls
-//     filp_close.
-
-//   - (https://tinyurl.com/4zdxrz52) filp_close calls f_op->flush
-//     (fuse_flush).
+//   - (http://goo.gl/e3lv0e) sys_close calls __close_fd, calls filp_close.
+//   - (http://goo.gl/nI8fxD) filp_close calls f_op->flush (fuse_flush).
 //
 // But note that this is also sent in other contexts where a file descriptor is
-// closed, such as dup2(2) (https://tinyurl.com/5bj3z3f5). In the case of
-// close(2), a flush error is returned to the user. For dup2(2), it is not.
+// closed, such as dup2(2) (cf. http://goo.gl/NQDvFS). In the case of close(2),
+// a flush error is returned to the user. For dup2(2), it is not.
 //
 // One potentially significant case where this may not be sent is mmap'd files,
 // where the behavior is complicated:
 //
-//   - munmap(2) does not cause flushes (https://tinyurl.com/ycy9z2jb).
+//   - munmap(2) does not cause flushes (cf. http://goo.gl/j8B9g0).
 //
-//   - On OS X, if a user modifies a mapped file via the mapping before closing
-//     the file with close(2), the WriteFileOps for the modifications may not
-//     be received before the FlushFileOp for the close(2) (cf.
+//   - On OS X, if a user modifies a mapped file via the mapping before
+//     closing the file with close(2), the WriteFileOps for the modifications
+//     may not be received before the FlushFileOp for the close(2) (cf.
 //     https://github.com/osxfuse/osxfuse/issues/202). It appears that this may
-//     be fixed in osxfuse 3 (https://tinyurl.com/2ne2jv8u).
+//     be fixed in osxfuse 3 (cf. https://goo.gl/rtvbko).
 //
-//   - However, you safely can arrange for writes via a mapping to be flushed
-//     by calling msync(2) followed by close(2). On OS X msync(2) will cause a
-//     WriteFileOps to go through and close(2) will cause a FlushFile as usual
-//     (https://tinyurl.com/2p9b4axf). On Linux, msync(2) does nothing unless
-//     you set the MS_SYNC flag, in which case it causes a SyncFileOp to be
-//     sent (https://tinyurl.com/2y3d9hhj).
+//   - However, you safely can arrange for writes via a mapping to be
+//     flushed by calling msync(2) followed by close(2). On OS X msync(2)
+//     will cause a WriteFileOps to go through and close(2) will cause a
+//     FlushFile as usual (cf. http://goo.gl/kVmNcx). On Linux, msync(2) does
+//     nothing unless you set the MS_SYNC flag, in which case it causes a
+//     SyncFileOp to be sent (cf. http://goo.gl/P3mErk).
 //
 // In summary: if you make data durable in both FlushFile and SyncFile, then
 // your users can get safe behavior from mapped files on both operating systems
 // by calling msync(2) with MS_SYNC, followed by munmap(2), followed by
-// close(2). On Linux, the msync(2) is optional (cf.
-// https://tinyurl.com/unesszdp and the notes on WriteFileOp).
+// close(2). On Linux, the msync(2) is optional (cf. http://goo.gl/EIhAxv and
+// the notes on WriteFileOp).
 //
 // Because of cases like dup2(2), FlushFileOps are not necessarily one to one
 // with OpenFileOps. They should not be used for reference counting, and the
@@ -900,8 +858,7 @@ type FlushFileOp struct {
 // The kernel guarantees that the handle ID will not be used in further calls
 // to the file system (unless it is reissued by the file system).
 //
-// Errors from this op are ignored by the kernel
-// (https://tinyurl.com/2aaccyzk).
+// Errors from this op are ignored by the kernel (cf. http://goo.gl/RL38Do).
 type ReleaseFileHandleOp struct {
 	// The handle ID to be released. The kernel guarantees that this ID will not
 	// be used in further calls to the file system (unless it is reissued by the
@@ -1026,11 +983,6 @@ type FallocateOp struct {
 	OpContext OpContext
 }
 
-type SyncFSOp struct {
-	Inode     InodeID
-	OpContext OpContext
-}
-
 // Request notifications when the file system user calls poll/select or
 // similar operations on a file.
 type PollOp struct {

fuseops/simple_types.go

@@ -27,7 +27,7 @@ import (
 // RootInodeID.
 //
 // This corresponds to struct inode::i_no in the VFS layer.
-// (https://tinyurl.com/23sr9svd)
+// (Cf. http://goo.gl/tvYyQt)
 type InodeID uint64
 
 // RootInodeID is a distinguished inode ID that identifies the root of the file
@@ -57,7 +57,7 @@ func init() {
 }
 
 // InodeAttributes contains attributes for a file or directory inode. It
-// corresponds to struct inode (https://tinyurl.com/23sr9svd).
+// corresponds to struct inode (cf. http://goo.gl/tvYyQt).
 type InodeAttributes struct {
 	Size uint64
 
@@ -70,20 +70,20 @@ type InodeAttributes struct {
 	// Note that in contrast to the defaults for FUSE, this package mounts file
 	// systems in a manner such that the kernel checks inode permissions in the
 	// standard posix way. This is implemented by setting the default_permissions
-	// mount option (https://tinyurl.com/ytun2zsn, https://tinyurl.com/52hz9vya).
+	// mount option (cf. http://goo.gl/1LxOop and http://goo.gl/1pTjuk).
 	//
 	// For example, in the case of mkdir:
 	//
-	//  *  (https://tinyurl.com/4yp9bu3h) sys_mkdirat calls inode_permission.
+	//  *  (http://goo.gl/JkdxDI) sys_mkdirat calls inode_permission.
 	//
 	//  *  (...) inode_permission eventually calls do_inode_permission.
 	//
-	//  *  (https://tinyurl.com/5f9k2eya) calls i_op->permission, which is
-	//     fuse_permission (https://tinyurl.com/4kevbw27).
+	//  *  (http://goo.gl/aGCsmZ) calls i_op->permission, which is
+	//     fuse_permission (cf. http://goo.gl/VZ9beH).
 	//
-	//  *  (https://tinyurl.com/nfea3pwj) fuse_permission doesn't do anything at
-	//     all for several code paths if FUSE_DEFAULT_PERMISSIONS is unset. In
-	//     contrast, if that flag *is* set, then it calls generic_permission.
+	//  *  (http://goo.gl/5kqUKO) fuse_permission doesn't do anything at all for
+	//     several code paths if FUSE_DEFAULT_PERMISSIONS is unset. In contrast,
+	//     if that flag *is* set, then it calls generic_permission.
 	//
 	Mode os.FileMode
 
@@ -117,15 +117,15 @@ func (a *InodeAttributes) DebugString() string {
 // when an ID is reused.
 //
 // This corresponds to struct inode::i_generation in the VFS layer.
-// (https://tinyurl.com/23sr9svd)
+// (Cf. http://goo.gl/tvYyQt)
 //
 // Some related reading:
 //
 //	http://fuse.sourceforge.net/doxygen/structfuse__entry__param.html
 //	http://stackoverflow.com/q/11071996/1505451
-//	https://tinyurl.com/yn7wmcmy
+//	http://goo.gl/CqvwyX
 //	http://julipedia.meroh.net/2005/09/nfs-file-handles.html
-//	https://tinyurl.com/2c8vsfrs
+//	http://goo.gl/wvo3MB
 type GenerationNumber uint64
 
 // HandleID is an opaque 64-bit number used to identify a particular open
@@ -160,7 +160,7 @@ type ChildInodeEntry struct {
 	// Ownership information in particular must be set to something reasonable or
 	// by default root will own everything and unprivileged users won't be able
 	// to do anything useful. In traditional file systems in the kernel, the
-	// function inode_init_owner (https://tinyurl.com/5yfdrfdf) contains the
+	// function inode_init_owner (http://goo.gl/5qavg8) contains the
 	// standards-compliant logic for this.
 	Attributes InodeAttributes
 
@@ -169,19 +169,16 @@ type ChildInodeEntry struct {
 	//
 	// For example, this is the abridged call chain for fstat(2):
 	//
-	//  *  (https://tinyurl.com/bdd6ek3c) fstat calls vfs_fstat.
-	//  *  (https://tinyurl.com/3enne935) vfs_fstat eventuall calls
-	//     vfs_getattr_nosec.
-	//  *  (https://tinyurl.com/y5rkhzx4) vfs_getattr_nosec calls i_op->getattr.
-	//  *  (https://tinyurl.com/33hawubc) fuse_getattr calls
-	//     fuse_update_attributes.
-	//  *  (https://tinyurl.com/ywhhshxt) fuse_update_attributes uses the values
-	//      in the struct inode if allowed, otherwise calling out to the
-	//      user-space code.
+	//  *  (http://goo.gl/tKBH1p) fstat calls vfs_fstat.
+	//  *  (http://goo.gl/3HeITq) vfs_fstat eventuall calls vfs_getattr_nosec.
+	//  *  (http://goo.gl/DccFQr) vfs_getattr_nosec calls i_op->getattr.
+	//  *  (http://goo.gl/dpKkst) fuse_getattr calls fuse_update_attributes.
+	//  *  (http://goo.gl/yNlqPw) fuse_update_attributes uses the values in the
+	//     struct inode if allowed, otherwise calling out to the user-space code.
 	//
 	// In addition to obvious cases like fstat, this is also used in more subtle
-	// cases like updating size information before seeking
-	// (https://tinyurl.com/hv2jabnh) or reading (https://tinyurl.com/bdkpz96v).
+	// cases like updating size information before seeking (http://goo.gl/2nnMFa)
+	// or reading (http://goo.gl/FQSWs8).
 	//
 	// Most 'real' file systems do not set inode_operations::getattr, and
 	// therefore vfs_getattr_nosec calls generic_fillattr which simply grabs the
@@ -208,18 +205,16 @@ type ChildInodeEntry struct {
 	// As in the discussion of attribute caching above, unlike real file systems,
 	// FUSE file systems may spontaneously change their name -> inode mapping.
 	// Therefore the FUSE VFS layer uses dentry_operations::d_revalidate
-	// (https://tinyurl.com/ydb8ncrk) to intercept lookups and revalidate by
-	// calling the user-space LookUpInode method. However the latter may be slow,
-	// so it caches the entries until the time defined by this field.
+	// (http://goo.gl/dVea0h) to intercept lookups and revalidate by calling the
+	// user-space LookUpInode method. However the latter may be slow, so it
+	// caches the entries until the time defined by this field.
 	//
 	// Example code walk:
 	//
-	//     * (https://tinyurl.com/crddueft) lookup_dcache calls d_revalidate if
-	//       enabled.
-	//
-	//     * (https://tinyurl.com/bdsxacjy) fuse_dentry_revalidate just uses the
-	//       dentry's inode if fuse_dentry_time(entry) hasn't passed. Otherwise
-	//       it sends a lookup request.
+	//     * (http://goo.gl/M2G3tO) lookup_dcache calls d_revalidate if enabled.
+	//     * (http://goo.gl/ef0Elu) fuse_dentry_revalidate just uses the dentry's
+	//     inode if fuse_dentry_time(entry) hasn't passed. Otherwise it sends a
+	//     lookup request.
 	//
 	// Leave at the zero value to disable caching.
 	//

fusetesting/readdir.go

@@ -30,7 +30,7 @@ func (f sortedEntries) Swap(i, j int)      { f[i], f[j] = f[j], f[i] }
 // Read the directory with the given name and return a list of directory
 // entries, sorted by name.
 //
-// Unlike ioutil.ReadDir (https://tinyurl.com/yft8kkxb), this function does not
+// Unlike ioutil.ReadDir (cf. http://goo.gl/i0nNP4), this function does not
 // silently ignore "file not found" errors when stat'ing the names read from
 // the directory.
 func ReadDirPicky(dirname string) (entries []os.FileInfo, err error) {

fusetesting/stat_linux.go

@@ -28,7 +28,7 @@ func extractBirthtime(sys interface{}) (birthtime time.Time, ok bool) {
 }
 
 func extractNlink(sys interface{}) (nlink uint64, ok bool) {
-	return uint64(sys.(*syscall.Stat_t).Nlink), true
+	return sys.(*syscall.Stat_t).Nlink, true
 }
 
 func getTimes(stat *syscall.Stat_t) (atime, ctime, mtime time.Time) {

fuseutil/dirent.go

@@ -64,9 +64,9 @@ func WriteDirent(buf []byte, d Dirent) (n int) {
 // Returns zero if the entry would not fit.
 func WriteDirentPlus(buf []byte, e *fuseops.ChildInodeEntry, d Dirent) (n int) {
 	// We want to write bytes with the layout of fuse_dirent
-	// (https://tinyurl.com/4k7y2h9r) in host order. The struct must be aligned
-	// according to FUSE_DIRENT_ALIGN (https://tinyurl.com/3m3ewu7h), which
-	// dictates 8-byte alignment.
+	// (http://goo.gl/BmFxob) in host order. The struct must be aligned according
+	// to FUSE_DIRENT_ALIGN (http://goo.gl/UziWvH), which dictates 8-byte
+	// alignment.
 	type fuse_dirent struct {
 		ino     uint64
 		off     uint64

fuseutil/file_system.go

@@ -63,7 +63,6 @@ type FileSystem interface {
 	ListXattr(context.Context, *fuseops.ListXattrOp) error
 	SetXattr(context.Context, *fuseops.SetXattrOp) error
 	Fallocate(context.Context, *fuseops.FallocateOp) error
-	SyncFS(context.Context, *fuseops.SyncFSOp) error
 	Poll(context.Context, *fuseops.PollOp) error
 
 	SetConnection(*fuse.Connection)
@@ -85,8 +84,8 @@ type FileSystem interface {
 //
 // (It is safe to naively process ops concurrently because the kernel
 // guarantees to serialize operations that the user expects to happen in order,
-// cf. https://tinyurl.com/bddm85v5, fuse-devel thread "Fuse guarantees on
-// concurrent requests").
+// cf. http://goo.gl/jnkHPO, fuse-devel thread "Fuse guarantees on concurrent
+// requests").
 func NewFileSystemServer(fs FileSystem) fuse.Server {
 	return &fileSystemServer{
 		fs: fs,
@@ -243,9 +242,6 @@ func (s *fileSystemServer) handleOp(
 	case *fuseops.FallocateOp:
 		err = s.fs.Fallocate(ctx, typed)
 
-	case *fuseops.SyncFSOp:
-		err = s.fs.SyncFS(ctx, typed)
-
 	case *fuseops.PollOp:
 		err = s.fs.Poll(ctx, typed)
 	}

fuseutil/not_implemented_file_system.go

@@ -204,12 +204,6 @@ func (fs *NotImplementedFileSystem) Fallocate(
 	return fuse.ENOSYS
 }
 
-func (fs *NotImplementedFileSystem) SyncFS(
-	ctx context.Context,
-	op *fuseops.SyncFSOp) error {
-	return fuse.ENOSYS
-}
-
 func (fs *NotImplementedFileSystem) Poll(
 	ctx context.Context,
 	op *fuseops.PollOp) error {

go.mod

@@ -1,19 +1,17 @@
 module github.com/jacobsa/fuse
 
-go 1.20
+go 1.18
 
 require (
 	github.com/detailyang/go-fallocate v0.0.0-20180908115635-432fa640bd2e
 	github.com/jacobsa/oglematchers v0.0.0-20150720000706-141901ea67cd
+	github.com/jacobsa/oglemock v0.0.0-20150831005832-e94d794d06ff // indirect
 	github.com/jacobsa/ogletest v0.0.0-20170503003838-80d50a735a11
+	github.com/jacobsa/reqtrace v0.0.0-20150505043853-245c9e0234cb // indirect
 	github.com/jacobsa/syncutil v0.0.0-20180201203307-228ac8e5a6c3
 	github.com/jacobsa/timeutil v0.0.0-20170205232429-577e5acbbcf6
 	github.com/kylelemons/godebug v1.1.0
-	golang.org/x/net v0.23.0
-	golang.org/x/sys v0.18.0
-)
-
-require (
-	github.com/jacobsa/oglemock v0.0.0-20150831005832-e94d794d06ff // indirect
-	github.com/jacobsa/reqtrace v0.0.0-20150505043853-245c9e0234cb // indirect
+	golang.org/x/crypto v0.0.0-20220525230936-793ad666bf5e // indirect
+	golang.org/x/net v0.0.0-20220526153639-5463443f8c37
+	golang.org/x/sys v0.0.0-20220520151302-bc2c85ada10a
 )

go.sum

@@ -14,7 +14,25 @@ github.com/jacobsa/timeutil v0.0.0-20170205232429-577e5acbbcf6 h1:XKHJmHcgU9glxk
 github.com/jacobsa/timeutil v0.0.0-20170205232429-577e5acbbcf6/go.mod h1:JEWKD6V8xETMW+DEv+IQVz++f8Cn8O/X0HPeDY3qNis=
 github.com/kylelemons/godebug v1.1.0 h1:RPNrshWIDI6G2gRW9EHilWtl7Z6Sb1BR0xunSBf0SNc=
 github.com/kylelemons/godebug v1.1.0/go.mod h1:9/0rRGxNHcop5bhtWyNeEfOS8JIWk580+fNqagV/RAw=
-golang.org/x/net v0.23.0 h1:7EYJ93RZ9vYSZAIb2x3lnuvqO5zneoD6IvWjuhfxjTs=
-golang.org/x/net v0.23.0/go.mod h1:JKghWKKOSdJwpW2GEx0Ja7fmaKnMsbu+MWVZTokSYmg=
-golang.org/x/sys v0.18.0 h1:DBdB3niSjOA/O0blCZBqDefyWNYveAYMNF1Wum0DYQ4=
-golang.org/x/sys v0.18.0/go.mod h1:/VUhepiaJMQUp4+oa/7Zr1D23ma6VTLIYjOOTFZPUcA=
+golang.org/x/crypto v0.0.0-20190308221718-c2843e01d9a2/go.mod h1:djNgcEr1/C05ACkg1iLfiJU5Ep61QUkGW8qpdssI0+w=
+golang.org/x/crypto v0.0.0-20220525230936-793ad666bf5e h1:T8NU3HyQ8ClP4SEE+KbFlg6n0NhuTsN4MyznaarGsZM=
+golang.org/x/crypto v0.0.0-20220525230936-793ad666bf5e/go.mod h1:IxCIyHEi3zRg3s0A5j5BB6A9Jmi73HwBIUl50j+osU4=
+golang.org/x/net v0.0.0-20200301022130-244492dfa37a h1:GuSPYbZzB5/dcLNCwLQLsg3obCJtX9IJhpXkvY7kzk0=
+golang.org/x/net v0.0.0-20200301022130-244492dfa37a/go.mod h1:z5CRVTTTmAJ677TzLLGU+0bjPO0LkuOLi4/5GtJWs/s=
+golang.org/x/net v0.0.0-20211112202133-69e39bad7dc2/go.mod h1:9nx3DQGgdP8bBQD5qxJ1jj9UTztislL4KSBs9R2vV5Y=
+golang.org/x/net v0.0.0-20220526153639-5463443f8c37 h1:lUkvobShwKsOesNfWWlCS5q7fnbG1MEliIzwu886fn8=
+golang.org/x/net v0.0.0-20220526153639-5463443f8c37/go.mod h1:XRhObCWvk6IyKnWLug+ECip1KBveYUHfp+8e9klMJ9c=
+golang.org/x/sys v0.0.0-20190215142949-d0b11bdaac8a/go.mod h1:STP8DvDyc/dI5b8T5hshtkjS+E42TnysNCUPdjciGhY=
+golang.org/x/sys v0.0.0-20200302150141-5c8b2ff67527 h1:uYVVQ9WP/Ds2ROhcaGPeIdVq0RIXVLwsHlnvJ+cT1So=
+golang.org/x/sys v0.0.0-20200302150141-5c8b2ff67527/go.mod h1:h1NjWce9XRLGQEsW7wpKNCjG9DtNlClVuFLEZdDNbEs=
+golang.org/x/sys v0.0.0-20201119102817-f84b799fce68/go.mod h1:h1NjWce9XRLGQEsW7wpKNCjG9DtNlClVuFLEZdDNbEs=
+golang.org/x/sys v0.0.0-20210423082822-04245dca01da/go.mod h1:h1NjWce9XRLGQEsW7wpKNCjG9DtNlClVuFLEZdDNbEs=
+golang.org/x/sys v0.0.0-20210615035016-665e8c7367d1/go.mod h1:oPkhp1MJrh7nUepCBck5+mAzfO9JrbApNNgaTdGDITg=
+golang.org/x/sys v0.0.0-20220520151302-bc2c85ada10a h1:dGzPydgVsqGcTRVwiLJ1jVbufYwmzD3LfVPLKsKg+0k=
+golang.org/x/sys v0.0.0-20220520151302-bc2c85ada10a/go.mod h1:oPkhp1MJrh7nUepCBck5+mAzfO9JrbApNNgaTdGDITg=
+golang.org/x/term v0.0.0-20201126162022-7de9c90e9dd1/go.mod h1:bj7SfCRtBDWHUb9snDiAeCFNEtKQo2Wmx5Cou7ajbmo=
+golang.org/x/term v0.0.0-20210927222741-03fcf44c2211/go.mod h1:jbD1KX2456YbFQfuXm/mYQcufACuNUgVhRMnK/tPxf8=
+golang.org/x/text v0.3.0/go.mod h1:NqM8EUOU14njkJ3fqMW+pc6Ldnwhi/IjpwHt7yyuwOQ=
+golang.org/x/text v0.3.6/go.mod h1:5Zoc/QRtKVWzQhOtBMvqHzDpF6irO9z98xDceosuGiQ=
+golang.org/x/text v0.3.7/go.mod h1:u+2+/6zg+i71rQMx5EYifcz6MCKuco9NR6JIITiCfzQ=
+golang.org/x/tools v0.0.0-20180917221912-90fa682c2a6e/go.mod h1:n7NCudcB/nEzxVGmLbDWY5pfWTLqBcC2KZ6jyYvM4mQ=

internal/buffer/in_message.go

@@ -17,7 +17,6 @@ package buffer
 import (
 	"fmt"
 	"io"
-	"sync"
 	"syscall"
 	"unsafe"
 
@@ -53,38 +52,11 @@ func NewInMessage() *InMessage {
 	}
 }
 
-var readLock sync.Mutex
-
-func (m *InMessage) ReadSingle(r io.Reader) (int, error) {
-	readLock.Lock()
-	defer readLock.Unlock()
-
-	// read request length
-	if _, err := io.ReadFull(r, m.storage[0:4]); err != nil {
-		return 0, err
-	}
-
-	l := m.Header().Len
-	// read remaining request
-	if n, err := io.ReadFull(r, m.storage[4:l]); err != nil {
-		return n, err
-	}
-	return int(l), nil
-}
-
 // Initialize with the data read by a single call to r.Read. The first call to
 // Consume will consume the bytes directly after the fusekernel.InHeader
 // struct.
 func (m *InMessage) Init(r io.Reader) error {
-
-	var n int
-	var err error
-	if fusekernel.IsPlatformFuseT {
-		n, err = m.ReadSingle(r)
-	} else {
-		n, err = r.Read(m.storage[:])
-	}
-
+	n, err := r.Read(m.storage[:])
 	if err != nil {
 		return err
 	}

internal/fusekernel/fuse_kernel.go

@@ -41,14 +41,12 @@ import (
 	"unsafe"
 )
 
-var IsPlatformFuseT bool
-
 // The FUSE version implemented by the package.
 const (
 	ProtoVersionMinMajor = 7
-	ProtoVersionMinMinor = 18
+	ProtoVersionMinMinor = 19
 	ProtoVersionMaxMajor = 7
-	ProtoVersionMaxMinor = 34
+	ProtoVersionMaxMinor = 31
 )
 
 const (
@@ -229,7 +227,6 @@ const (
 	OpenDirectIO    OpenResponseFlags = 1 << 0 // bypass page cache for this open file
 	OpenKeepCache   OpenResponseFlags = 1 << 1 // don't invalidate the data cache on open
 	OpenNonSeekable OpenResponseFlags = 1 << 2 // mark the file as non-seekable (not supported on OS X)
-	OpenCacheDir    OpenResponseFlags = 1 << 3 // allow caching this directory
 
 	OpenPurgeAttr OpenResponseFlags = 1 << 30 // OS X
 	OpenPurgeUBC  OpenResponseFlags = 1 << 31 // OS X
@@ -243,7 +240,6 @@ var openResponseFlagNames = []flagName{
 	{uint32(OpenDirectIO), "OpenDirectIO"},
 	{uint32(OpenKeepCache), "OpenKeepCache"},
 	{uint32(OpenNonSeekable), "OpenNonSeekable"},
-	{uint32(OpenCacheDir), "OpenCacheDir"},
 	{uint32(OpenPurgeAttr), "OpenPurgeAttr"},
 	{uint32(OpenPurgeUBC), "OpenPurgeUBC"},
 }
@@ -270,7 +266,6 @@ const (
 	InitAsyncDIO         InitFlags = 1 << 15
 	InitWritebackCache   InitFlags = 1 << 16
 	InitNoOpenSupport    InitFlags = 1 << 17
-	InitParallelDirOps   InitFlags = 1 << 18
 	InitMaxPages         InitFlags = 1 << 22
 	InitCacheSymlinks    InitFlags = 1 << 23
 	InitNoOpendirSupport InitFlags = 1 << 24
@@ -423,13 +418,6 @@ const (
 	OpBatchForget = 42
 	OpFallocate   = 43
 	OpReaddirplus = 44
-	//
-	OpRename2       = 45
-	OpLseek         = 46
-	OpCopyFileRange = 47
-	OpSetupMapping  = 48
-	OpRemoveMapping = 49
-	OpSyncFS        = 50
 
 	// OS X
 	OpSetvolname = 61
@@ -862,10 +850,6 @@ type NotifyInvalEntryOut struct {
 	padding uint32
 }
 
-type SyncFSIn struct {
-	Padding uint64
-}
-
 type NotifyDeleteOut struct {
 	Parent  uint64
 	Child   uint64

mount_config.go

@@ -50,7 +50,7 @@ type MountConfig struct {
 	// Linux only. OS X always behaves as if writeback caching is disabled.
 	//
 	// By default on Linux we allow the kernel to perform writeback caching
-	// (https://tinyurl.com/3ma8ypeu):
+	// (cf. http://goo.gl/LdZzo1):
 	//
 	// *   When the user calls write(2), the kernel sticks the user's data into
 	//     its page cache. Only later does it call through to the file system,
@@ -65,7 +65,7 @@ type MountConfig struct {
 	//
 	// *   close(2) (and anything else calling f_op->flush) causes all dirty
 	//     pages to be written out before it proceeds to send a FlushFileOp
-	//     (https://tinyurl.com/3ur6vmsv).
+	//     (cf. https://goo.gl/TMrY6X).
 	//
 	// *   Similarly, close(2) causes the kernel to send a setattr request
 	//     filling in the mtime if any dirty pages were flushed, since the time
@@ -78,23 +78,22 @@ type MountConfig struct {
 	//
 	//     Code walk:
 	//
-	//     *   (https://tinyurl.com/3ur6vmsv) fuse_flush calls write_inode_now
-	//         before calling the file system. The latter eventually calls into
+	//     *   (https://goo.gl/zTIZQ9) fuse_flush calls write_inode_now before
+	//         calling the file system. The latter eventually calls into
 	//         __writeback_single_inode.
 	//
-	//     *   (https://tinyurl.com/35vtmtsz) __writeback_single_inode calls
+	//     *   (https://goo.gl/L7Z2w5) __writeback_single_inode calls
 	//         do_writepages, which writes out any dirty pages.
 	//
-	//     *   (https://tinyurl.com/3wv4paaf) __writeback_single_inode later
-	//         calls write_inode, which calls into the superblock op struct's
-	//         write_inode member. For fuse, this is fuse_write_inode
-	//         (https://tinyurl.com/mrxupe98).
+	//     *   (https://goo.gl/DOPgla) __writeback_single_inode later calls
+	//         write_inode, which calls into the superblock op struct's write_inode
+	//         member. For fuse, this is fuse_write_inode
+	//         (cf. https://goo.gl/eDSKOX).
 	//
-	//     *   (https://tinyurl.com/mrxt9bta) fuse_write_inode calls
-	//         fuse_flush_times.
+	//     *   (https://goo.gl/PbkGA1) fuse_write_inode calls fuse_flush_times.
 	//
-	//     *   (https://tinyurl.com/mr49cjdf) fuse_flush_times sends a setttr
-	//         request for setting the inode's mtime.
+	//     *   (https://goo.gl/ig8x9V) fuse_flush_times sends a setttr request
+	//         for setting the inode's mtime.
 	//
 	// However, this brings along some caveats:
 	//
@@ -103,11 +102,11 @@ type MountConfig struct {
 	//
 	// *   The kernel caches mtime and ctime regardless of whether the file
 	//     system tells it to do so, disregarding the result of further getattr
-	//     requests (https://tinyurl.com/mrxnfatv, https://tinyurl.com/27jju8n4).
-	//     It appears this may be true of the file size, too. Writeback caching
-	//     may therefore not be suitable for file systems where these attributes
-	//     can spontaneously change for reasons the kernel doesn't observe. See
-	//     https://tinyurl.com/yyprvjvs for more discussion.
+	//     requests (cf. https://goo.gl/3ZZMUw, https://goo.gl/7WtQUp). It
+	//     appears this may be true of the file size, too. Writeback caching may
+	//     therefore not be suitable for file systems where these attributes can
+	//     spontaneously change for reasons the kernel doesn't observe. See
+	//     http://goo.gl/V5WQCN for more discussion.
 	//
 	// Setting DisableWritebackCaching disables this behavior. Instead the file
 	// system is called one or more times for each write(2), and the user's
@@ -117,12 +116,12 @@ type MountConfig struct {
 	// OS X only.
 	//
 	// Normally on OS X we mount with the novncache option
-	// (https://tinyurl.com/52hz9vya), which disables entry caching in the
-	// kernel. This is because macFUSE (osxfuse) does not honor the entry
-	// expiration values we return to it, instead caching potentially forever
-	// (https://tinyurl.com/2rr6cd3m), and it is probably better to fail to cache
-	// than to cache for too long, since the latter is more likely to hide
-	// consistency bugs that are difficult to detect and diagnose.
+	// (cf. http://goo.gl/1pTjuk), which disables entry caching in the kernel.
+	// This is because osxfuse does not honor the entry expiration values we
+	// return to it, instead caching potentially forever (cf.
+	// http://goo.gl/8yR0Ie), and it is probably better to fail to cache than to
+	// cache for too long, since the latter is more likely to hide consistency
+	// bugs that are difficult to detect and diagnose.
 	//
 	// This field disables the use of novncache, restoring entry caching. Beware:
 	// the value of ChildInodeEntry.EntryExpiration is ignored by the kernel, and
@@ -172,16 +171,9 @@ type MountConfig struct {
 	// OS X only.
 	//
 	// The name of the mounted volume, as displayed in the Finder. If empty, a
-	// default name involving the string 'osxfuse' (the old name of macFUSE)
-	// is used.
+	// default name involving the string 'osxfuse' is used.
 	VolumeName string
 
-	// OS X only.
-	//
-	// The FUSE implementation to use. One of FUSEImplFuseT (default) or
-	// FUSEImplMacFUSE.
-	FuseImpl FUSEImpl
-
 	// Additional key=value options to pass unadulterated to the underlying mount
 	// command. See `man 8 mount`, the fuse documentation, etc. for
 	// system-specific information.
@@ -198,20 +190,8 @@ type MountConfig struct {
 	// Flag to enable async reads that are received from
 	// the kernel
 	EnableAsyncReads bool
-
-	// Flag to enable parallel lookup and readdir operations from the
-	// kernel
-	// Ref: https://github.com/torvalds/linux/commit/5c672ab3f0ee0f78f7acad183f34db0f8781a200
-	EnableParallelDirOps bool
 }
 
-type FUSEImpl uint8
-
-const (
-	FUSEImplFuseT = iota
-	FUSEImplMacFUSE
-)
-
 // Create a map containing all of the key=value mount options to be given to
 // the mount helper.
 func (c *MountConfig) toMap() (opts map[string]string) {

mount_darwin.go

@@ -4,7 +4,6 @@ import (
 	"bytes"
 	"errors"
 	"fmt"
-	"log"
 	"os"
 	"os/exec"
 	"strconv"
@@ -12,7 +11,6 @@ import (
 	"syscall"
 
 	"github.com/jacobsa/fuse/internal/buffer"
-	"github.com/jacobsa/fuse/internal/fusekernel"
 )
 
 var errNoAvail = errors.New("no available fuse devices")
@@ -80,8 +78,6 @@ var (
 	}
 )
 
-const FUSET_SRV_PATH = "/usr/local/bin/go-nfsv4"
-
 func loadOSXFUSE(bin string) error {
 	cmd := exec.Command(bin)
 	cmd.Dir = "/"
@@ -216,7 +212,7 @@ func callMountCommFD(
 // to the kernel. Mounting continues in the background, and is complete when an
 // error is written to the supplied channel. The file system may need to
 // service the connection in order for mounting to complete.
-func mountOsxFuse(
+func mount(
 	dir string,
 	cfg *MountConfig,
 	ready chan<- error) (dev *os.File, err error) {
@@ -267,161 +263,3 @@ func mountOsxFuse(
 
 	return nil, errOSXFUSENotFound
 }
-
-func fusetBinary() (string, error) {
-	srv_path := os.Getenv("FUSE_NFSSRV_PATH")
-	if srv_path == "" {
-		srv_path = FUSET_SRV_PATH
-	}
-
-	if _, err := os.Stat(srv_path); err == nil {
-		return srv_path, nil
-	}
-
-	return "", fmt.Errorf("FUSE-T not found")
-}
-
-func unixgramSocketpair() (l, r *os.File, err error) {
-	fd, err := syscall.Socketpair(syscall.AF_UNIX, syscall.SOCK_STREAM, 0)
-	if err != nil {
-		return nil, nil, os.NewSyscallError("socketpair",
-			err.(syscall.Errno))
-	}
-	l = os.NewFile(uintptr(fd[0]), fmt.Sprintf("socketpair-half%d", fd[0]))
-	r = os.NewFile(uintptr(fd[1]), fmt.Sprintf("socketpair-half%d", fd[1]))
-	return
-}
-
-var local, local_mon, remote, remote_mon *os.File
-
-func startFuseTServer(binary string, argv []string,
-	additionalEnv []string,
-	wait bool,
-	debugLogger *log.Logger,
-	ready chan<- error) (*os.File, error) {
-	if debugLogger != nil {
-		debugLogger.Println("Creating a socket pair")
-	}
-
-	var err error
-	local, remote, err = unixgramSocketpair()
-	if err != nil {
-		return nil, err
-	}
-	defer remote.Close()
-
-	local_mon, remote_mon, err = unixgramSocketpair()
-	if err != nil {
-		return nil, err
-	}
-	defer remote_mon.Close()
-
-	syscall.CloseOnExec(int(local.Fd()))
-	syscall.CloseOnExec(int(local_mon.Fd()))
-
-	if debugLogger != nil {
-		debugLogger.Println("Creating files to wrap the sockets")
-	}
-
-	if debugLogger != nil {
-		debugLogger.Println("Starting fusermount/os mount")
-	}
-	// Start fusermount/mount_macfuse/mount_osxfuse.
-	cmd := exec.Command(binary, argv...)
-	cmd.Env = append(os.Environ(), "_FUSE_COMMFD=3")
-	cmd.Env = append(cmd.Env, "_FUSE_MONFD=4")
-	cmd.Env = append(cmd.Env, additionalEnv...)
-	cmd.ExtraFiles = []*os.File{remote, remote_mon}
-	cmd.Stderr = nil
-	cmd.Stdout = nil
-	// daemonize
-	cmd.SysProcAttr = &syscall.SysProcAttr{
-		Setsid: true,
-	}
-
-	// Run the command.
-	err = cmd.Start()
-	cmd.Process.Release()
-	if err != nil {
-		return nil, fmt.Errorf("running %v: %v", binary, err)
-	}
-
-	if debugLogger != nil {
-		debugLogger.Println("Wrapping socket pair in a connection")
-	}
-
-	if debugLogger != nil {
-		debugLogger.Println("Checking that we have a unix domain socket")
-	}
-
-	if debugLogger != nil {
-		debugLogger.Println("Read a message from socket")
-	}
-
-	go func() {
-		if _, err = local_mon.Write([]byte("mount")); err != nil {
-			err = fmt.Errorf("fuse-t failed: %v", err)
-		} else {
-			reply := make([]byte, 4)
-			if _, err = local_mon.Read(reply); err != nil {
-				fmt.Printf("mount read  %v\n", err)
-				err = fmt.Errorf("fuse-t failed: %v", err)
-			}
-		}
-
-		ready <- err
-		close(ready)
-	}()
-
-	if debugLogger != nil {
-		debugLogger.Println("Successfully read the socket message.")
-	}
-
-	return local, nil
-}
-
-func mountFuset(
-	dir string,
-	cfg *MountConfig,
-	ready chan<- error) (dev *os.File, err error) {
-	fuseTBin, err := fusetBinary()
-	if err != nil {
-		return nil, err
-	}
-
-	fusekernel.IsPlatformFuseT = true
-	env := []string{}
-	argv := []string{
-		fmt.Sprintf("--rwsize=%d", buffer.MaxWriteSize),
-	}
-
-	if cfg.VolumeName != "" {
-		argv = append(argv, "--volname")
-		argv = append(argv, cfg.VolumeName)
-	}
-	if cfg.ReadOnly {
-		argv = append(argv, "-r")
-	}
-
-	env = append(env, "_FUSE_COMMVERS=2")
-	argv = append(argv, dir)
-
-	return startFuseTServer(fuseTBin, argv, env, false, cfg.DebugLogger, ready)
-}
-
-func mount(
-	dir string,
-	cfg *MountConfig,
-	ready chan<- error) (dev *os.File, err error) {
-
-	fusekernel.IsPlatformFuseT = false
-	switch cfg.FuseImpl {
-	case FUSEImplMacFUSE:
-		dev, err = mountOsxFuse(dir, cfg, ready)
-	case FUSEImplFuseT:
-		fallthrough
-	default:
-		dev, err = mountFuset(dir, cfg, ready)
-	}
-	return
-}

mount_linux.go

@@ -84,7 +84,6 @@ func directmount(dir string, cfg *MountConfig) (*os.File, error) {
 		mountflag = fn(mountflag)
 		delete(opts, k)
 	}
-	fsname := opts["fsname"]
 	delete(opts, "fsname") // handled via fstype mount(2) parameter
 	fstype := "fuse"
 	if subtype, ok := opts["subtype"]; ok {
@@ -97,7 +96,7 @@ func directmount(dir string, cfg *MountConfig) (*os.File, error) {
 		cfg.DebugLogger.Println("Starting the unix mounting")
 	}
 	if err := unix.Mount(
-		fsname,    // source
+		cfg.FSName, // source
 		dir,        // target
 		fstype,     // fstype
 		mountflag,  // mountflag

samples/cachingfs/caching_fs.go

@@ -48,11 +48,6 @@ const (
 // Each file responds to reads with random contents. SetKeepCache can be used
 // to control whether the response to OpenFileOp tells the kernel to keep the
 // file's data in the page cache or not.
-//
-// Each directory responds to readdir with random entries (different names).
-// SetCacheDir and SetKeepDirCache can be used to control whether the response
-// to OpenDirOp tells the kernel to cache the next response of ReadDirOp
-// in cache, or invalidate the existing cached entry in page cache.
 type CachingFS interface {
 	fuseutil.FileSystem
 
@@ -71,14 +66,6 @@ type CachingFS interface {
 	// Instruct the file system whether or not to reply to OpenFileOp with
 	// FOPEN_KEEP_CACHE set.
 	SetKeepCache(keep bool)
-
-	// Instruct the file system whether or not to reply to OpenDirOp with
-	// FOPEN_KEEP_CACHE set.
-	SetKeepDirCache(keep bool)
-
-	// Instruct the file system whether or not to reply to OpenDirOp with
-	// FOPEN_CACHE_DIR set.
-	SetCacheDir(cacheDir bool)
 }
 
 // Create a file system that issues cacheable responses according to the
@@ -139,10 +126,6 @@ type cachingFS struct {
 	// GUARDED_BY(mu)
 	keepPageCache bool
 
-	// GUARDED_BY(mu)
-	keepDirCache bool
-	cacheDir     bool
-
 	// The current ID of the lowest numbered non-root inode.
 	//
 	// INVARIANT: baseID > fuseops.RootInodeID
@@ -219,17 +202,6 @@ func (fs *cachingFS) barAttrs() fuseops.InodeAttributes {
 	}
 }
 
-func randomString(len int) string {
-	bytes := make([]byte, len)
-	nn, err := rand.Read(bytes)
-
-	if err != nil || len != nn {
-		return ""
-	}
-
-	return string(bytes)
-}
-
 ////////////////////////////////////////////////////////////////////////
 // Public interface
 ////////////////////////////////////////////////////////////////////////
@@ -282,22 +254,6 @@ func (fs *cachingFS) SetKeepCache(keep bool) {
 	fs.keepPageCache = keep
 }
 
-// LOCKS_EXCLUDED(fs.mu)
-func (fs *cachingFS) SetKeepDirCache(keep bool) {
-	fs.mu.Lock()
-	defer fs.mu.Unlock()
-
-	fs.keepDirCache = keep
-}
-
-// LOCKS_EXCLUDED(fs.mu)
-func (fs *cachingFS) SetCacheDir(cacheDir bool) {
-	fs.mu.Lock()
-	defer fs.mu.Unlock()
-
-	fs.cacheDir = cacheDir
-}
-
 ////////////////////////////////////////////////////////////////////////
 // FileSystem methods
 ////////////////////////////////////////////////////////////////////////
@@ -393,51 +349,6 @@ func (fs *cachingFS) GetInodeAttributes(
 func (fs *cachingFS) OpenDir(
 	ctx context.Context,
 	op *fuseops.OpenDirOp) error {
-	fs.mu.Lock()
-	defer fs.mu.Unlock()
-
-	op.CacheDir = fs.cacheDir
-	op.KeepCache = fs.keepDirCache
-
-	return nil
-}
-
-func (fs *cachingFS) ReadDir(
-	ctx context.Context,
-	op *fuseops.ReadDirOp) error {
-
-	entries := []fuseutil.Dirent{
-		{
-			Offset: 1,
-			Inode:  101,
-			Name:   "rdir" + randomString(4),
-			Type:   fuseutil.DT_Directory,
-		},
-		{
-			Offset: 2,
-			Inode:  102,
-			Name:   "rfoo" + randomString(4),
-			Type:   fuseutil.DT_File,
-		},
-	}
-
-	// Grab the range of interest.
-	if op.Offset > fuseops.DirOffset(len(entries)) {
-		return fuse.EIO
-	}
-
-	entries = entries[op.Offset:]
-
-	// Resume at the specified offset into the array.
-	for _, e := range entries {
-		n := fuseutil.WriteDirent(op.Dst[op.BytesRead:], e)
-		if n == 0 {
-			break
-		}
-
-		op.BytesRead += n
-	}
-
 	return nil
 }
 

samples/cachingfs/caching_fs_test.go

@@ -723,253 +723,3 @@ func (t *PageCacheTest) TwoFileHandles_KeepCache() {
 
 	ExpectTrue(bytes.Equal(c1, c3))
 }
-
-////////////////////////////////////////////////////////////////////////
-// Dir cache
-////////////////////////////////////////////////////////////////////////
-
-type DirCacheTest struct {
-	cachingFSTest
-}
-
-var _ SetUpInterface = &DirCacheTest{}
-
-func init() { RegisterTestSuite(&DirCacheTest{}) }
-
-func (t *DirCacheTest) SetUp(ti *TestInfo) {
-	const (
-		lookupEntryTimeout = 0
-		getattrTimeout     = 0
-	)
-
-	t.cachingFSTest.setUp(ti, lookupEntryTimeout, getattrTimeout)
-}
-
-func (t *DirCacheTest) CacheDirAndKeepDirCache() {
-	t.fs.SetCacheDir(true)
-	t.fs.SetKeepDirCache(true)
-
-	// First read, kernel will cache the dir response.
-	f, err := os.Open(path.Join(t.Dir, "dir"))
-	defer f.Close() // Make sure to close specially required in failure scenario.
-	AssertEq(nil, err)
-
-	names1, err := f.Readdirnames(-1)
-	AssertEq(nil, err)
-	AssertEq(2, len(names1))
-
-	err = f.Close()
-	AssertEq(nil, err)
-
-	// Second read, will be served from cache.
-	f, err = os.Open(path.Join(t.Dir, "dir"))
-	AssertEq(nil, err)
-
-	names2, err := f.Readdirnames(-1)
-	AssertEq(nil, err)
-	AssertEq(2, len(names2))
-
-	err = f.Close()
-	AssertEq(nil, err)
-
-	AssertEq(names1[0], names2[0])
-	AssertEq(names1[1], names2[1])
-}
-
-func (t *DirCacheTest) NoCacheDirAndKeepDirCache() {
-	t.fs.SetCacheDir(false)
-	t.fs.SetKeepDirCache(true)
-
-	// First read, no caching since NoCacheDir.
-	f, err := os.Open(path.Join(t.Dir, "dir"))
-	defer f.Close() // Make sure to close specially required in failure scenario.
-	AssertEq(nil, err)
-
-	names1, err := f.Readdirnames(-1)
-	AssertEq(nil, err)
-	AssertEq(2, len(names1))
-
-	err = f.Close()
-	AssertEq(nil, err)
-
-	// Second read, will be served from filesystem, hence different name.
-	f, err = os.Open(path.Join(t.Dir, "dir"))
-	AssertEq(nil, err)
-
-	names2, err := f.Readdirnames(-1)
-	AssertEq(nil, err)
-	AssertEq(2, len(names2))
-
-	err = f.Close()
-	AssertEq(nil, err)
-
-	AssertNe(names1[0], names2[0])
-	AssertNe(names1[1], names2[1])
-}
-
-func (t *DirCacheTest) CacheDirAndNoKeepDirCache() {
-	t.fs.SetCacheDir(true)
-	t.fs.SetKeepDirCache(false)
-
-	// First read, kernel will cache the dir response.
-	f, err := os.Open(path.Join(t.Dir, "dir"))
-	defer f.Close() // Make sure to close specially required in failure scenario.
-	AssertEq(nil, err)
-
-	names1, err := f.Readdirnames(-1)
-	AssertEq(nil, err)
-	AssertEq(2, len(names1))
-
-	err = f.Close()
-	AssertEq(nil, err)
-
-	// Second read, cached response will be invalidated since NoKeepDirCache.
-	// Hence, different names.
-	f, err = os.Open(path.Join(t.Dir, "dir"))
-	AssertEq(nil, err)
-
-	names2, err := f.Readdirnames(-1)
-	AssertEq(nil, err)
-	AssertEq(2, len(names2))
-
-	err = f.Close()
-	AssertEq(nil, err)
-
-	AssertNe(names1[0], names2[0])
-	AssertNe(names1[1], names2[1])
-}
-
-func (t *DirCacheTest) NoCacheDirAndNoKeepDirCache() {
-	t.fs.SetCacheDir(false)
-	t.fs.SetKeepDirCache(false)
-
-	// First read, no caching since NoCacheDir.
-	f, err := os.Open(path.Join(t.Dir, "dir"))
-	defer f.Close() // Make sure to close specially required in failure scenario.
-	AssertEq(nil, err)
-
-	names1, err := f.Readdirnames(-1)
-	AssertEq(nil, err)
-	AssertEq(2, len(names1))
-
-	err = f.Close()
-	AssertEq(nil, err)
-
-	// Second read, will be served from filesystem.
-	// Since NoCacheDir also NoKeepDirCache. Hence, different names.
-	f, err = os.Open(path.Join(t.Dir, "dir"))
-	AssertEq(nil, err)
-
-	names2, err := f.Readdirnames(-1)
-	AssertEq(nil, err)
-	AssertEq(2, len(names2))
-
-	err = f.Close()
-	AssertEq(nil, err)
-
-	AssertNe(names1[0], names2[0])
-	AssertNe(names1[1], names2[1])
-}
-
-func (t *DirCacheTest) CacheDirWithChangingKeepDirCache() {
-	t.fs.SetCacheDir(true)
-	t.fs.SetKeepDirCache(false)
-
-	// First read, kernel will cache the dir response.
-	f, err := os.Open(path.Join(t.Dir, "dir"))
-	defer f.Close() // Make sure to close specially required in failure scenario.
-	AssertEq(nil, err)
-
-	names1, err := f.Readdirnames(-1)
-	AssertEq(nil, err)
-	AssertEq(2, len(names1))
-
-	err = f.Close()
-	AssertEq(nil, err)
-
-	// Cached response will not be invalidated. Hence, served from kernel cache.
-	t.fs.SetKeepDirCache(true)
-	// Second read, will be served from cache
-	f, err = os.Open(path.Join(t.Dir, "dir"))
-	AssertEq(nil, err)
-
-	names2, err := f.Readdirnames(-1)
-	AssertEq(nil, err)
-	AssertEq(2, len(names2))
-
-	err = f.Close()
-	AssertEq(nil, err)
-
-	AssertEq(names1[0], names2[0])
-	AssertEq(names1[1], names2[1])
-
-	// Kernel has cached but invalidated due to NoKeepDirCache.
-	// Hence, third read will be served from filesystem.
-	t.fs.SetKeepDirCache(false)
-
-	// Third read, will be served from filesystem. So, names will be different.
-	f, err = os.Open(path.Join(t.Dir, "dir"))
-	AssertEq(nil, err)
-
-	names3, err := f.Readdirnames(-1)
-	AssertEq(nil, err)
-	AssertEq(2, len(names3))
-
-	err = f.Close()
-	AssertEq(nil, err)
-
-	AssertNe(names2[0], names3[0])
-	AssertNe(names2[1], names3[1])
-}
-
-func (t *DirCacheTest) ChangingCacheDirWithKeepDirCache() {
-	t.fs.SetCacheDir(true)
-	t.fs.SetKeepDirCache(true)
-
-	// First read, kernel will cache the dir response.
-	f, err := os.Open(path.Join(t.Dir, "dir"))
-	defer f.Close() // Make sure to close specially required in failure scenario.
-	AssertEq(nil, err)
-
-	names1, err := f.Readdirnames(-1)
-	AssertEq(nil, err)
-	AssertEq(2, len(names1))
-
-	err = f.Close()
-	AssertEq(nil, err)
-
-	// Cached response will not be invalidated, but also not be served from cache.
-	// Since NoCacheDir so names will be different.
-	t.fs.SetCacheDir(false)
-	// Second read, will be served from filesystem.
-	f, err = os.Open(path.Join(t.Dir, "dir"))
-	AssertEq(nil, err)
-
-	names2, err := f.Readdirnames(-1)
-	AssertEq(nil, err)
-	AssertEq(2, len(names2))
-
-	err = f.Close()
-	AssertEq(nil, err)
-
-	AssertNe(names1[0], names2[0])
-	AssertNe(names1[1], names2[1])
-
-	// Third read will be served from cache.
-	// But first read response is cached, since KeepDirCache.
-	t.fs.SetCacheDir(true)
-
-	// Third read, will be served from filesystem. So, names will be different.
-	f, err = os.Open(path.Join(t.Dir, "dir"))
-	AssertEq(nil, err)
-
-	names3, err := f.Readdirnames(-1)
-	AssertEq(nil, err)
-	AssertEq(2, len(names3))
-
-	err = f.Close()
-	AssertEq(nil, err)
-
-	AssertEq(names1[0], names3[0])
-	AssertEq(names1[1], names3[1])
-}

samples/hellofs/hello_fs.go

@@ -218,7 +218,7 @@ func (fs *helloFS) ReadDir(
 
 	// Grab the range of interest.
 	if op.Offset > fuseops.DirOffset(len(entries)) {
-		return nil
+		return fuse.EIO
 	}
 
 	entries = entries[op.Offset:]

samples/memfs/callback_test.go

@@ -1,81 +0,0 @@
-package memfs_test
-
-import (
-	"os"
-	"path"
-	"testing"
-
-	"github.com/jacobsa/fuse/samples"
-	"github.com/jacobsa/fuse/samples/memfs"
-	. "github.com/jacobsa/ogletest"
-)
-
-func TestFuseServerCallbacks(t *testing.T) { RunTests(t) }
-
-type CallbackTest struct {
-	samples.SampleTest
-	readFileCallbackInvoked  bool
-	writeFileCallbackInvoked bool
-}
-
-func init() { RegisterTestSuite(&CallbackTest{}) }
-
-func (t *CallbackTest) SetUp(ti *TestInfo) {
-	t.MountConfig.DisableWritebackCaching = true
-	t.readFileCallbackInvoked = false
-	t.writeFileCallbackInvoked = false
-
-	t.Server = memfs.NewMemFSWithCallbacks(
-		currentUid(),
-		currentGid(),
-		func() { t.readFileCallbackInvoked = true },
-		func() { t.writeFileCallbackInvoked = true },
-	)
-	t.SampleTest.SetUp(ti)
-}
-
-// The test suite is torn down during the test to ensure
-// that all FUSE operations are complete before checking
-// the invocations on the callbacks.
-func (t *CallbackTest) TearDown() {}
-
-func (t *CallbackTest) TestCallbacksInvokedForWriteFile() {
-	AssertEq(t.writeFileCallbackInvoked, false)
-	AssertEq(t.readFileCallbackInvoked, false)
-
-	// Write a file.
-	fileName := path.Join(t.Dir, memfs.CheckFileOpenFlagsFileName)
-	const contents = "Hello world"
-	err := os.WriteFile(fileName, []byte(contents), 0400)
-	AssertEq(nil, err)
-
-	// Tear down the FUSE mount. This ensures that all FUSE operations are complete.
-	t.SampleTest.TearDown()
-
-	// Check that our callback was invoked as expected.
-	AssertEq(t.writeFileCallbackInvoked, true)
-	AssertEq(t.readFileCallbackInvoked, false)
-}
-
-func (t *CallbackTest) TestCallbacksInvokedForWriteFileAndReadFile() {
-	AssertEq(t.writeFileCallbackInvoked, false)
-	AssertEq(t.readFileCallbackInvoked, false)
-
-	// Write a file.
-	fileName := path.Join(t.Dir, memfs.CheckFileOpenFlagsFileName)
-	const contents = "Hello world"
-	err := os.WriteFile(fileName, []byte(contents), 0400)
-	AssertEq(nil, err)
-
-	// Read it back.
-	slice, err := os.ReadFile(fileName)
-	AssertEq(nil, err)
-	ExpectEq(contents, string(slice))
-
-	// Tear down the FUSE mount. This ensures that all FUSE operations are complete.
-	t.SampleTest.TearDown()
-
-	// Check that our callback was invoked as expected.
-	AssertEq(t.writeFileCallbackInvoked, true)
-	AssertEq(t.readFileCallbackInvoked, true)
-}

samples/memfs/inode.go

@@ -17,7 +17,6 @@ package memfs
 import (
 	"fmt"
 	"io"
-	"io/fs"
 	"os"
 	"time"
 
@@ -378,8 +377,7 @@ func (in *inode) SetAttributes(
 
 	// Change mode?
 	if mode != nil {
-		in.attrs.Mode &= ^fs.ModePerm
-		in.attrs.Mode |= *mode & fs.ModePerm
+		in.attrs.Mode = *mode
 	}
 
 	// Change mtime?

samples/memfs/memfs.go

@@ -67,9 +67,6 @@ type memFS struct {
 	// INVARIANT: This is all and only indices i of 'inodes' such that i >
 	// fuseops.RootInodeID and inodes[i] == nil
 	freeInodes []fuseops.InodeID // GUARDED_BY(mu)
-
-	readFileCallback  func()
-	writeFileCallback func()
 }
 
 // Create a file system that stores data and metadata in memory.
@@ -80,21 +77,11 @@ type memFS struct {
 func NewMemFS(
 	uid uint32,
 	gid uint32) fuse.Server {
-	return NewMemFSWithCallbacks(uid, gid, nil, nil)
-}
-
-func NewMemFSWithCallbacks(
-	uid uint32,
-	gid uint32,
-	readFileCallback func(),
-	writeFileCallback func()) fuse.Server {
 	// Set up the basic struct.
 	fs := &memFS{
 		inodes: make([]*inode, fuseops.RootInodeID+1),
 		uid:    uid,
 		gid:    gid,
-		readFileCallback:  readFileCallback,
-		writeFileCallback: writeFileCallback,
 	}
 
 	// Set up the root inode.
@@ -640,7 +627,7 @@ func (fs *memFS) OpenFile(
 		// Set attribute (name=fileOpenFlagsXattr, value=OpenFlags) to test whether
 		// we set OpenFlags correctly. The value is checked in test with getXattr.
 		value := make([]byte, 4)
-		binary.LittleEndian.PutUint32(value, uint32(op.OpenFlags)&syscall.O_ACCMODE)
+		binary.LittleEndian.PutUint32(value, uint32(op.OpenFlags))
 		err := fs.setXattrHelper(inode, &fuseops.SetXattrOp{
 			Name:  FileOpenFlagsXattrName,
 			Value: value,
@@ -666,8 +653,6 @@ func (fs *memFS) ReadFile(
 	var err error
 	op.BytesRead, err = inode.ReadAt(op.Dst, op.Offset)
 
-	op.Callback = fs.readFileCallback
-
 	// Don't return EOF errors; we just indicate EOF to fuse using a short read.
 	if err == io.EOF {
 		return nil
@@ -688,8 +673,6 @@ func (fs *memFS) WriteFile(
 	// Serve the request.
 	_, err := inode.WriteAt(op.Data, op.Offset)
 
-	op.Callback = fs.writeFileCallback
-
 	return err
 }
 

samples/mount_hello/mount.go

@@ -50,7 +50,6 @@ func main() {
 
 	cfg := &fuse.MountConfig{
 		ReadOnly: *fReadOnly,
-		FuseImpl: fuse.FUSEImplMacFUSE,
 	}
 
 	if *fDebug {

samples/roloopbackfs/inode.go

@@ -21,7 +21,7 @@ import (
 	"path/filepath"
 	"sync"
 	"sync/atomic"
-	"syscall"
+	"time"
 
 	"github.com/jacobsa/fuse/fuseops"
 	"github.com/jacobsa/fuse/fuseutil"
@@ -53,21 +53,22 @@ func getOrCreateInode(inodes *sync.Map, parentId fuseops.InodeID, name string) (
 		return nil, nil
 	}
 	parentPath := parent.(Inode).Path()
-
-	path := filepath.Join(parentPath, name)
-	fileInfo, err := os.Stat(path)
+	entries, err := ioutil.ReadDir(parentPath)
 	if err != nil {
-		return nil, nil
+		return nil, err
 	}
-	stat, _ := fileInfo.Sys().(*syscall.Stat_t)
-
+	for _, entry := range entries {
+		if entry.Name() == name {
 			inodeEntry := &inodeEntry{
-		id:   fuseops.InodeID(stat.Ino),
-		path: path,
+				id:   nextInodeID(),
+				path: filepath.Join(parentPath, name),
 			}
 			storedEntry, _ := inodes.LoadOrStore(inodeEntry.id, inodeEntry)
 			return storedEntry.(Inode), nil
 		}
+	}
+	return nil, nil
+}
 
 type inodeEntry struct {
 	id   fuseops.InodeID
@@ -100,12 +101,14 @@ func (in *inodeEntry) Attributes() (*fuseops.InodeAttributes, error) {
 	if err != nil {
 		return &fuseops.InodeAttributes{}, err
 	}
-
 	return &fuseops.InodeAttributes{
 		Size:   uint64(fileInfo.Size()),
 		Nlink:  1,
 		Mode:   fileInfo.Mode(),
+		Atime:  fileInfo.ModTime(),
 		Mtime:  fileInfo.ModTime(),
+		Ctime:  time.Now(),
+		Crtime: time.Now(),
 		Uid:    uid,
 		Gid:    gid,
 	}, nil
@@ -116,12 +119,12 @@ func (in *inodeEntry) ListChildren(inodes *sync.Map) ([]*fuseutil.Dirent, error)
 	if err != nil {
 		return nil, err
 	}
-	dirents := []*fuseutil.Dirent{}
+	dirents := make([]*fuseutil.Dirent, len(children))
 	for i, child := range children {
 
 		childInode, err := getOrCreateInode(inodes, in.id, child.Name())
 		if err != nil || childInode == nil {
-			continue
+			return nil, nil
 		}
 
 		var childType fuseutil.DirentType
@@ -133,12 +136,12 @@ func (in *inodeEntry) ListChildren(inodes *sync.Map) ([]*fuseutil.Dirent, error)
 			childType = fuseutil.DT_File
 		}
 
-		dirents = append(dirents, &fuseutil.Dirent{
+		dirents[i] = &fuseutil.Dirent{
 			Offset: fuseops.DirOffset(i + 1),
 			Inode:  childInode.Id(),
 			Name:   child.Name(),
 			Type:   childType,
-		})
+		}
 	}
 	return dirents, nil
 }

samples/roloopbackfs/roloopbackfs.go

@@ -121,7 +121,7 @@ func (fs *readonlyLoopbackFs) ReadDir(
 	}
 
 	if op.Offset > fuseops.DirOffset(len(children)) {
-		return nil
+		return fuse.EIO
 	}
 
 	children = children[op.Offset:]
@@ -139,13 +139,8 @@ func (fs *readonlyLoopbackFs) ReadDir(
 func (fs *readonlyLoopbackFs) OpenFile(
 	ctx context.Context,
 	op *fuseops.OpenFileOp) error {
-
-	var _, found = fs.inodes.Load(op.Inode)
-	if !found {
-		return fuse.ENOENT
-	}
+	// Allow opening any file.
 	return nil
-
 }
 
 func (fs *readonlyLoopbackFs) ReadFile(

samples/statfs/statfs_darwin_test.go

@@ -16,7 +16,6 @@ package statfs_test
 
 import (
 	"fmt"
-	"github.com/jacobsa/oglematchers"
 	"math"
 	"regexp"
 	"syscall"
@@ -69,7 +68,7 @@ func (t *StatFSTest) Syscall_ZeroValues() {
 	ExpectEq(0, stat.Bavail)
 	ExpectEq(0, stat.Files)
 	ExpectEq(0, stat.Ffree)
-	ExpectThat(convertName(stat.Fstypename[:]), oglematchers.AnyOf(oglematchers.Equals("osxfuse"), oglematchers.Equals("macfuse")))
+	ExpectEq("osxfuse", convertName(stat.Fstypename[:]))
 	ExpectEq(t.canonicalDir, convertName(stat.Mntonname[:]))
 	ExpectEq(fsName, convertName(stat.Mntfromname[:]))
 }
@@ -104,7 +103,7 @@ func (t *StatFSTest) Syscall_NonZeroValues() {
 	ExpectEq(canned.BlocksAvailable, stat.Bavail)
 	ExpectEq(canned.Inodes, stat.Files)
 	ExpectEq(canned.InodesFree, stat.Ffree)
-	ExpectThat(convertName(stat.Fstypename[:]), oglematchers.AnyOf(oglematchers.Equals("osxfuse"), oglematchers.Equals("macfuse")))
+	ExpectEq("osxfuse", convertName(stat.Fstypename[:]))
 	ExpectEq(t.canonicalDir, convertName(stat.Mntonname[:]))
 	ExpectEq(fsName, convertName(stat.Mntfromname[:]))
 }