1. swapping direction would rather toggle tiling
2. the next screen was calculated wrongly (found outmost)
3. the electrictborder geometry was not updated when swapping the mode on screen changes
BUG: 329136
FIXED-IN: 4.11.6
CCBUG: 222921
REVIEW: 114648
Since windows can place the decoration outside the screen
this needs to be still a valid condition when checking
whether we've to keep in area
In addition: calculate tx, ty and perform one move call
(include rule check and XMoveWindow unless there's a geometry
blocker ...)
BUG: 324792
FIXED-IN: 4.11.2
REVIEW: 112805
whether or not a window is maximizable does really not
matter (it's not if the size is locked, so the
maximized size is the only size) but only if the
window can take the fullscreen geometry.
otoh, the size restrictions (maximum size, fixed aspect)
should be honored by default but still ignorable by rule
BUG: 324733
FIXED-IN: 4.11.2
REVIEW: 112654
Because that's where it's placed. Notable esp. when there're panels on opposing sides.
Since snapping keeps max'd windows in position, it should preferably keep it in the proper position ;-)
REVIEW: 112322
when visualPixels is not 0, this means the titlebar does
not touch an upper/lower border, thus moving that direction
is ok and protection should be sought horizontally
BUG: 322507
FIXED-IN: 4.11
REVIEW: 111573
using the actual delta this casewise causes false
preference for window snapping (less to move)
this restores the pre snap-to-content behavior
in that regard and delta isn't used for anything else.
BUG: 321325
FIXED-IN: 4.11
REVIEW: 111139
similar to maximization blocking
also ensure the user can permit configure requests
for quick tiled and maximized windows
REVIEW: 111186
BUG: 321491
FIXED-IN: 4.11
Using Xcb::Window to wrap this helper window and port all the used XLib
calls to XCB.
Also renaming the variable to m_ and camel case to follow general naming
scheme.
For all the decoration updates called from Client into the decoration we
also have a signal being emitted. So turning the pure virtual public
functions into slots means we can just connect our existing signals and
get rid off the deep function calls.
The keepAbove/Below signals are changed to take a boolean argument as
needed by KDecoration and a few emitted signals are moved to a better
fitting location.
REVIEW: 110335
Uses widgets/translucentbackground as FrameSvg item to ensure that we
don't get a huge black square on the screen.
When bordering a screen edge we disable the border except if all edges
are bordered. This makes a little bit more clear in the quick tiling case
what will be the geometry.
REVIEW: 110176
It's not a typical singleton as the ctor is not taking a Workspace* and
needs addtional data to be passed to NETRootInfo.
All the initialization code is moved to RootInfo::create() and the tear-
down code is moved to RootInfo::destroyed(). This includes the support
window which used to be a member of Workspace. It's only needed by
RootInfo, so there is no need to have the ownership inside Workspace.
Instead of using a QWidget we just create a normal window through xcb.
It gets destroyed again in the tear-down code after the RootInfo got
destroyed.
REVIEW: 110238
Main motivation for this change is that it's unhandy to have the class
definition in workspace.h and client.h while the implementation is in
events.cpp although nothing in events.cpp uses it directly.
By getting it out of workspace.h we get the header a little bit smaller
which should improve compile time given that it's included almost
everywhere.
In events.cpp the enum usage is changed to NETWinInfo as that's the class
where they are defined.
RootInfo does no longer hold a workspace pointer. Where it's needed it
uses the singleton accessor of Workspace.
REVIEW: 110199
Overall all notifications except compositing suspended by DBus were
configured by default to not have any action. This means all the time we
emit a notification we keep DBus and KDED busy for nothing.
All the cases when a notification is triggered ire also exported to
KWin scripting, so if one really needs to handle something in case a
window is moved, it could be done through a KWin script with much more
context about the event.
REVIEW: 110113
BUG: 258097
FIXED-IN: 4.11
Following the approaches of other split out functionality Screens is a
singleton class created by Workspace.
The class takes over the responsibility for:
* screenChanged signal delayed by timer
* number of screens
* geometry of given screen
* active screen
* config option for active screen follows mouse
The class contains a small abstraction layer and has a concrete subclass
wrapping around QDesktopWidget, but the idea is to go more low level and
interact with XRandR directly to get more detailed information.
All over KWin the usage from QDesktopWidget is ported over to the new
Screens class.
REVIEW: 109839
Instead of calculating the screen number each time screen() is invoked,
the screen number gets stored in a private member variable and evaluated
whenever either the screen count changes or the Toplevel's geometry
changes. During move/resize the screen property doesn't get updated. The
update is delayed till the end of the move/resize operation.
REVIEW: 109715
and btw. replace legacy "ignoreposition" by "ignoregeometry"
this will allow to use "apply initially" as "force" used to act
(ignore position on placement) and "force" to prevent clients
from reconfiguring themselves (to not break a tabgroup or to just
not be annoying)
BUG: 311720
CCBUG: 252314
REVIEW: 109691
FIXED-IN: 4.11
REVIEW: 103948
BUG: 91703
BUG: 299245
FIXED-IN: 4.11
- The setting is ignored, the decoration always gets a "true" for it
- moving a maximized window requires breaking a "strong" snap (1/16 of screen height - unless you use quick maximization)
- all snapping is done towards the client, not the frame
- QuickTileMode is exported to the decoration (just as the maximizeMode) so that it can fix the bordersize alongside that.
Where possible it is changed to Cursor::pos(), where we cannot use the
Cursor class (e.g. Aurorae) we can at least try to limit the usage to
prevent roundtrips to the X server.
REVIEW: 109178
The Client::cursor property is changed from QCursor to Qt::CursorShape
and renamed to m_cursor (as all usages are adjusted).
This property is mostly used to define the cursor on e.g. the extended
deco border window. To make this easier a XDefineCursor replacement is
added to xcbutils.h both as a static method and as a member function to
Xcb::Window.
A window can be "maximized" despite it's position is fixed.
Most obvioulsy for a corresponding of "0", but also in other
cases. The window can still be resized, some size is the
maximum one and there's no reason to prevent the shortcut of
this state.
BUG: 314392
REVIEW: 108789
FIXED-IN: 4.11
Using Xcb::Window to manage the xcb_window_t and simplify the code - no
longer need to check whether the input_window is valid before calling e.g.
map, as that's handled in Xcb::Window.
One XLib usage for setting cursor is still present. This will be ported
once all the QCursor::handle() get removed.
REVIEW: 108771
In fact it already used to be a Singleton as there is just one object
hold by the Singleton Workspace. So let's make it a proper Singleton
following our kind of standard approach of having a ::create factory
method called from Workspace ctor and a ::self to get to the singleton
instance.
This rewrite is mostly motivated by the need to handle multi screen
setups correctly. That is have edges per screen and not for the combined
geometry. Also porting from XLib to XCB has been a motivation for the
rewrite.
The design of the new ScreenEdge handling is described in the
documentation of ScreenEdges in screenedge.h.
In addition the following changes have been performed:
* move configuration from Options to ScreenEdge
* add screen edge information to Workspace::supportInformation (obviously
replaces what had been read from Options)
* have Workspace hold a pointer to ScreenEdges instead of an object
* forward declaration of ScreenEdges in workspaces.h, this explains the
seemingly unrelated changes of just another include in some files
BUG: 290887
FIXED-IN: 4.11
Thomas Lübking