e1000: indicate dropped packets in HW counters

The e1000 emulation silently discards RX packets if there's
insufficient space in the ring buffer. This leads to errors
on higher-level protocols in the guest, with no indication
about the error cause.

This patch increments the "Missed Packets Count" (MPC) and
"Receive No Buffers Count" (RNBC) HW counters in this case.
As the emulation has no FIFO for buffering packets that can't
immediately be pushed to the guest, these two registers are
practically equivalent (see 10.2.7.4, 10.2.7.33 in
https://www.intel.com/content/www/us/en/embedded/products/networking/82574l-gbe-controller-datasheet.html).

On a Linux guest, the register content  will be reflected in
the "rx_missed_errors" and "rx_no_buffer_count" stats from
"ethtool -S", and in the "missed" stat from "ip -s -s link show",
giving at least some hint about the error cause inside the guest.

If the cause is known, problems like this can often be avoided
easily, by increasing the number of RX descriptors in the guest
e1000 driver (e.g under Linux, "e1000.RxDescriptors=1024").

The patch also adds a qemu trace message for this condition.

Signed-off-by: Martin Wilck <mwilck@suse.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
master
Jason Wang 2018-10-16 17:40:45 +08:00
parent 1592a99470
commit 1001cf45a7
2 changed files with 16 additions and 3 deletions

View File

@ -36,6 +36,7 @@
#include "qemu/range.h"
#include "e1000x_common.h"
#include "trace.h"
static const uint8_t bcast[] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff};
@ -847,6 +848,15 @@ static uint64_t rx_desc_base(E1000State *s)
return (bah << 32) + bal;
}
static void
e1000_receiver_overrun(E1000State *s, size_t size)
{
trace_e1000_receiver_overrun(size, s->mac_reg[RDH], s->mac_reg[RDT]);
e1000x_inc_reg_if_not_full(s->mac_reg, RNBC);
e1000x_inc_reg_if_not_full(s->mac_reg, MPC);
set_ics(s, 0, E1000_ICS_RXO);
}
static ssize_t
e1000_receive_iov(NetClientState *nc, const struct iovec *iov, int iovcnt)
{
@ -916,8 +926,8 @@ e1000_receive_iov(NetClientState *nc, const struct iovec *iov, int iovcnt)
desc_offset = 0;
total_size = size + e1000x_fcs_len(s->mac_reg);
if (!e1000_has_rxbufs(s, total_size)) {
set_ics(s, 0, E1000_ICS_RXO);
return -1;
e1000_receiver_overrun(s, total_size);
return -1;
}
do {
desc_size = total_size - desc_offset;
@ -969,7 +979,7 @@ e1000_receive_iov(NetClientState *nc, const struct iovec *iov, int iovcnt)
rdh_start >= s->mac_reg[RDLEN] / sizeof(desc)) {
DBGOUT(RXERR, "RDH wraparound @%x, RDT %x, RDLEN %x\n",
rdh_start, s->mac_reg[RDT], s->mac_reg[RDLEN]);
set_ics(s, 0, E1000_ICS_RXO);
e1000_receiver_overrun(s, total_size);
return -1;
}
} while (desc_offset < total_size);

View File

@ -98,6 +98,9 @@ net_rx_pkt_rss_ip6_ex(void) "Calculating IPv6/EX RSS hash"
net_rx_pkt_rss_hash(size_t rss_length, uint32_t rss_hash) "RSS hash for %zu bytes: 0x%X"
net_rx_pkt_rss_add_chunk(void* ptr, size_t size, size_t input_offset) "Add RSS chunk %p, %zu bytes, RSS input offset %zu bytes"
# hw/net/e1000.c
e1000_receiver_overrun(size_t s, uint32_t rdh, uint32_t rdt) "Receiver overrun: dropped packet of %zu bytes, RDH=%u, RDT=%u"
# hw/net/e1000x_common.c
e1000x_rx_can_recv_disabled(bool link_up, bool rx_enabled, bool pci_master) "link_up: %d, rx_enabled %d, pci_master %d"
e1000x_vlan_is_vlan_pkt(bool is_vlan_pkt, uint16_t eth_proto, uint16_t vet) "Is VLAN packet: %d, ETH proto: 0x%X, VET: 0x%X"