vitalif
/
mirror_qemu
mirror of https://github.com/proxmox/mirror_qemu
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

hw/intc: GICv3 redistributor ITS processing 

Implemented lpi processing at redistributor to get lpi config info
from lpi configuration table,determine priority,set pending state in
lpi pending table and forward the lpi to cpuif.Added logic to invoke
redistributor lpi processing with translated LPI which set/clear LPI
from ITS device as part of ITS INT,CLEAR,DISCARD command and
GITS_TRANSLATER processing.

Signed-off-by: Shashi Mallela <shashi.mallela@linaro.org>
Tested-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20210910143951.92242-7-shashi.mallela@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
master
Shashi Mallela 2021-09-13 16:07:24 +01:00 committed by Peter Maydell
parent ac30dec396
commit 17fb5e36aa
7 changed files with 200 additions and 2 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

14
hw/intc/arm_gicv3.c
View File

@ -165,6 +165,16 @@ static void gicv3_redist_update_noirqset(GICv3CPUState *cs)
cs->hppi.grp = gicv3_irq_group(cs->gic, cs, cs->hppi.irq);
}
if ((cs->gicr_ctlr & GICR_CTLR_ENABLE_LPIS) && cs->gic->lpi_enable &&
(cs->hpplpi.prio != 0xff)) {
if (irqbetter(cs, cs->hpplpi.irq, cs->hpplpi.prio)) {
cs->hppi.irq = cs->hpplpi.irq;
cs->hppi.prio = cs->hpplpi.prio;
cs->hppi.grp = cs->hpplpi.grp;
seenbetter = true;
}
}
/* If the best interrupt we just found would preempt whatever
* was the previous best interrupt before this update, then
* we know it's definitely the best one now.
@ -339,9 +349,13 @@ static void gicv3_set_irq(void *opaque, int irq, int level)
static void arm_gicv3_post_load(GICv3State *s)
{
int i;
/* Recalculate our cached idea of the current highest priority
* pending interrupt, but don't set IRQ or FIQ lines.
*/
for (i = 0; i < s->num_cpu; i++) {
gicv3_redist_update_lpi(&s->cpu[i]);
}
gicv3_full_update_noirqset(s);
/* Repopulate the cache of GICv3CPUState pointers for target CPUs */
gicv3_cache_all_target_cpustates(s);

1
hw/intc/arm_gicv3_common.c
View File

@ -435,6 +435,7 @@ static void arm_gicv3_common_reset(DeviceState *dev)
memset(cs->gicr_ipriorityr, 0, sizeof(cs->gicr_ipriorityr));
cs->hppi.prio = 0xff;
cs->hpplpi.prio = 0xff;
/* State in the CPU interface must *not* be reset here, because it
* is part of the CPU's reset domain, not the GIC device's.

7
hw/intc/arm_gicv3_cpuif.c
View File

@ -899,10 +899,12 @@ static void icc_activate_irq(GICv3CPUState *cs, int irq)
cs->gicr_iactiver0 = deposit32(cs->gicr_iactiver0, irq, 1, 1);
cs->gicr_ipendr0 = deposit32(cs->gicr_ipendr0, irq, 1, 0);
gicv3_redist_update(cs);
} else {
} else if (irq < GICV3_LPI_INTID_START) {
gicv3_gicd_active_set(cs->gic, irq);
gicv3_gicd_pending_clear(cs->gic, irq);
gicv3_update(cs->gic, irq, 1);
} else {
gicv3_redist_lpi_pending(cs, irq, 0);
}
}
@ -1318,7 +1320,8 @@ static void icc_eoir_write(CPUARMState *env, const ARMCPRegInfo *ri,
trace_gicv3_icc_eoir_write(is_eoir0 ? 0 : 1,
gicv3_redist_affid(cs), value);
if (irq >= cs->gic->num_irq) {
if ((irq >= cs->gic->num_irq) &&
!(cs->gic->lpi_enable && (irq >= GICV3_LPI_INTID_START))) {
/* This handles two cases:
* 1. If software writes the ID of a spurious interrupt [ie 1020-1023]
* to the GICC_EOIR, the GIC ignores that write.

23
hw/intc/arm_gicv3_its.c
View File

@ -233,6 +233,7 @@ static bool process_its_cmd(GICv3ITSState *s, uint64_t value, uint32_t offset,
uint64_t cte = 0;
bool cte_valid = false;
bool result = false;
uint64_t rdbase;
if (cmd == NONE) {
devid = offset;
@ -293,6 +294,18 @@ static bool process_its_cmd(GICv3ITSState *s, uint64_t value, uint32_t offset,
* Current implementation only supports rdbase == procnum
* Hence rdbase physical address is ignored
*/
rdbase = (cte & GITS_CTE_RDBASE_PROCNUM_MASK) >> 1U;
if (rdbase > s->gicv3->num_cpu) {
return result;
}
if ((cmd == CLEAR) || (cmd == DISCARD)) {
gicv3_redist_process_lpi(&s->gicv3->cpu[rdbase], pIntid, 0);
} else {
gicv3_redist_process_lpi(&s->gicv3->cpu[rdbase], pIntid, 1);
}
if (cmd == DISCARD) {
IteEntry ite = {};
/* remove mapping from interrupt translation table */
@ -621,6 +634,7 @@ static void process_cmdq(GICv3ITSState *s)
MemTxResult res = MEMTX_OK;
bool result = true;
uint8_t cmd;
int i;
if (!(s->ctlr & ITS_CTLR_ENABLED)) {
return;
@ -685,6 +699,15 @@ static void process_cmdq(GICv3ITSState *s)
break;
case GITS_CMD_INV:
case GITS_CMD_INVALL:
/*
* Current implementation doesn't cache any ITS tables,
* but the calculated lpi priority information. We only
* need to trigger lpi priority re-calculation to be in
* sync with LPI config table or pending table changes.
*/
for (i = 0; i < s->gicv3->num_cpu; i++) {
gicv3_redist_update_lpi(&s->gicv3->cpu[i]);
}
break;
default:
break;

141
hw/intc/arm_gicv3_redist.c
View File

@ -254,6 +254,9 @@ static MemTxResult gicr_writel(GICv3CPUState *cs, hwaddr offset,
if (cs->gicr_typer & GICR_TYPER_PLPIS) {
if (value & GICR_CTLR_ENABLE_LPIS) {
cs->gicr_ctlr |= GICR_CTLR_ENABLE_LPIS;
/* Check for any pending interr in pending table */
gicv3_redist_update_lpi(cs);
gicv3_redist_update(cs);
} else {
cs->gicr_ctlr &= ~GICR_CTLR_ENABLE_LPIS;
}
@ -532,6 +535,144 @@ MemTxResult gicv3_redist_write(void *opaque, hwaddr offset, uint64_t data,
return r;
}
static void gicv3_redist_check_lpi_priority(GICv3CPUState *cs, int irq)
{
AddressSpace *as = &cs->gic->dma_as;
uint64_t lpict_baddr;
uint8_t lpite;
uint8_t prio;
lpict_baddr = cs->gicr_propbaser & R_GICR_PROPBASER_PHYADDR_MASK;
address_space_read(as, lpict_baddr + ((irq - GICV3_LPI_INTID_START) *
sizeof(lpite)), MEMTXATTRS_UNSPECIFIED, &lpite,
sizeof(lpite));
if (!(lpite & LPI_CTE_ENABLED)) {
return;
}
if (cs->gic->gicd_ctlr & GICD_CTLR_DS) {
prio = lpite & LPI_PRIORITY_MASK;
} else {
prio = ((lpite & LPI_PRIORITY_MASK) >> 1) | 0x80;
}
if ((prio < cs->hpplpi.prio) ||
((prio == cs->hpplpi.prio) && (irq <= cs->hpplpi.irq))) {
cs->hpplpi.irq = irq;
cs->hpplpi.prio = prio;
/* LPIs are always non-secure Grp1 interrupts */
cs->hpplpi.grp = GICV3_G1NS;
}
}
void gicv3_redist_update_lpi(GICv3CPUState *cs)
{
/*
* This function scans the LPI pending table and for each pending
* LPI, reads the corresponding entry from LPI configuration table
* to extract the priority info and determine if the current LPI
* priority is lower than the last computed high priority lpi interrupt.
* If yes, replace current LPI as the new high priority lpi interrupt.
*/
AddressSpace *as = &cs->gic->dma_as;
uint64_t lpipt_baddr;
uint32_t pendt_size = 0;
uint8_t pend;
int i, bit;
uint64_t idbits;
idbits = MIN(FIELD_EX64(cs->gicr_propbaser, GICR_PROPBASER, IDBITS),
GICD_TYPER_IDBITS);
if (!(cs->gicr_ctlr & GICR_CTLR_ENABLE_LPIS) || !cs->gicr_propbaser ||
!cs->gicr_pendbaser) {
return;
}
cs->hpplpi.prio = 0xff;
lpipt_baddr = cs->gicr_pendbaser & R_GICR_PENDBASER_PHYADDR_MASK;
/* Determine the highest priority pending interrupt among LPIs */
pendt_size = (1ULL << (idbits + 1));
for (i = GICV3_LPI_INTID_START / 8; i < pendt_size / 8; i++) {
address_space_read(as, lpipt_baddr + i, MEMTXATTRS_UNSPECIFIED, &pend,
sizeof(pend));
while (pend) {
bit = ctz32(pend);
gicv3_redist_check_lpi_priority(cs, i * 8 + bit);
pend &= ~(1 << bit);
}
}
}
void gicv3_redist_lpi_pending(GICv3CPUState *cs, int irq, int level)
{
/*
* This function updates the pending bit in lpi pending table for
* the irq being activated or deactivated.
*/
AddressSpace *as = &cs->gic->dma_as;
uint64_t lpipt_baddr;
bool ispend = false;
uint8_t pend;
/*
* get the bit value corresponding to this irq in the
* lpi pending table
*/
lpipt_baddr = cs->gicr_pendbaser & R_GICR_PENDBASER_PHYADDR_MASK;
address_space_read(as, lpipt_baddr + ((irq / 8) * sizeof(pend)),
MEMTXATTRS_UNSPECIFIED, &pend, sizeof(pend));
ispend = extract32(pend, irq % 8, 1);
/* no change in the value of pending bit, return */
if (ispend == level) {
return;
}
pend = deposit32(pend, irq % 8, 1, level ? 1 : 0);
address_space_write(as, lpipt_baddr + ((irq / 8) * sizeof(pend)),
MEMTXATTRS_UNSPECIFIED, &pend, sizeof(pend));
/*
* check if this LPI is better than the current hpplpi, if yes
* just set hpplpi.prio and .irq without doing a full rescan
*/
if (level) {
gicv3_redist_check_lpi_priority(cs, irq);
} else {
if (irq == cs->hpplpi.irq) {
gicv3_redist_update_lpi(cs);
}
}
}
void gicv3_redist_process_lpi(GICv3CPUState *cs, int irq, int level)
{
uint64_t idbits;
idbits = MIN(FIELD_EX64(cs->gicr_propbaser, GICR_PROPBASER, IDBITS),
GICD_TYPER_IDBITS);
if (!(cs->gicr_ctlr & GICR_CTLR_ENABLE_LPIS) || !cs->gicr_propbaser ||
!cs->gicr_pendbaser || (irq > (1ULL << (idbits + 1)) - 1) ||
irq < GICV3_LPI_INTID_START) {
return;
}
/* set/clear the pending bit for this irq */
gicv3_redist_lpi_pending(cs, irq, level);
gicv3_redist_update(cs);
}
void gicv3_redist_set_irq(GICv3CPUState *cs, int irq, int level)
{
/* Update redistributor state for a change in an external PPI input line */

9
hw/intc/gicv3_internal.h
View File

@ -140,6 +140,8 @@ FIELD(GICR_PENDBASER, PHYADDR, 16, 36)
FIELD(GICR_PENDBASER, OUTERCACHE, 56, 3)
FIELD(GICR_PENDBASER, PTZ, 62, 1)
#define GICR_PROPBASER_IDBITS_THRESHOLD 0xd
#define ICC_CTLR_EL1_CBPR (1U << 0)
#define ICC_CTLR_EL1_EOIMODE (1U << 1)
#define ICC_CTLR_EL1_PMHE (1U << 6)
@ -305,6 +307,9 @@ FIELD(GITS_TYPER, CIL, 36, 1)
#define L1TABLE_ENTRY_SIZE 8
#define LPI_CTE_ENABLED TABLE_ENTRY_VALID_MASK
#define LPI_PRIORITY_MASK 0xfc
#define GITS_CMDQ_ENTRY_SIZE 32
#define NUM_BYTES_IN_DW 8
@ -397,6 +402,7 @@ FIELD(MAPC, RDBASE, 16, 32)
* Valid = 1 bit,RDBase = 36 bits(considering max RDBASE)
*/
#define GITS_CTE_SIZE (0x8ULL)
#define GITS_CTE_RDBASE_PROCNUM_MASK MAKE_64BIT_MASK(1, RDBASE_PROCNUM_LENGTH)
/* Special interrupt IDs */
#define INTID_SECURE 1020
@ -455,6 +461,9 @@ MemTxResult gicv3_redist_write(void *opaque, hwaddr offset, uint64_t data,
unsigned size, MemTxAttrs attrs);
void gicv3_dist_set_irq(GICv3State *s, int irq, int level);
void gicv3_redist_set_irq(GICv3CPUState *cs, int irq, int level);
void gicv3_redist_process_lpi(GICv3CPUState *cs, int irq, int level);
void gicv3_redist_lpi_pending(GICv3CPUState *cs, int irq, int level);
void gicv3_redist_update_lpi(GICv3CPUState *cs);
void gicv3_redist_send_sgi(GICv3CPUState *cs, int grp, int irq, bool ns);
void gicv3_init_cpuif(GICv3State *s);

7
include/hw/intc/arm_gicv3_common.h
View File

@ -204,6 +204,13 @@ struct GICv3CPUState {
* real state above; it doesn't need to be migrated.
*/
PendingIrq hppi;
/*
* Cached information recalculated from LPI tables
* in guest memory
*/
PendingIrq hpplpi;
/* This is temporary working state, to avoid a malloc in gicv3_update() */
bool seenbetter;
};