Unix domain socket support for VNC, by Anthony Liguori.

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@2260 c046a42c-6fe2-441c-8c8c-71466251a162

qemu-doc.texi

@@ -247,14 +247,21 @@ command line application. The emulated serial port is redirected on
 the console. Therefore, you can still use QEMU to debug a Linux kernel
 with a serial console.
 
-@item -vnc d
+@item -vnc display
 
 Normally, QEMU uses SDL to display the VGA output.  With this option,
-you can have QEMU listen on VNC display @var{d} and redirect the VGA
+you can have QEMU listen on VNC display @var{display} and redirect the VGA
 display over the VNC session.  It is very useful to enable the usb
 tablet device when using this option (option @option{-usbdevice
 tablet}). When using the VNC display, you must use the @option{-k}
-option to set the keyboard layout.
+option to set the keyboard layout if you are not using en-us.
+
+@var{display} may be in the form @var{interface:d}, in which case connections
+will only be allowed from @var{interface} on display @var{d}. Optionally,
+@var{interface} can be omitted.  @var{display} can also be in the form
+@var{unix:path} where @var{path} is the location of a unix socket to listen for
+connections on.
+
 
 @item -k language
 

vl.c

@@ -152,7 +152,7 @@ int win2k_install_hack = 0;
 int usb_enabled = 0;
 static VLANState *first_vlan;
 int smp_cpus = 1;
-int vnc_display = -1;
+const char *vnc_display;
 #if defined(TARGET_SPARC)
 #define MAX_CPUS 16
 #elif defined(TARGET_I386)
@@ -6818,11 +6818,7 @@ int main(int argc, char **argv)
                 }
                 break;
 	    case QEMU_OPTION_vnc:
-		vnc_display = atoi(optarg);
-		if (vnc_display < 0) {
-		    fprintf(stderr, "Invalid VNC display\n");
-		    exit(1);
-		}
+		vnc_display = optarg;
 		break;
             case QEMU_OPTION_no_acpi:
                 acpi_enabled = 0;
@@ -6946,7 +6942,7 @@ int main(int argc, char **argv)
     /* terminal init */
     if (nographic) {
         dumb_display_init(ds);
-    } else if (vnc_display != -1) {
+    } else if (vnc_display != NULL) {
 	vnc_display_init(ds, vnc_display);
     } else {
 #if defined(CONFIG_SDL)

vl.h

@@ -867,7 +867,7 @@ void sdl_display_init(DisplayState *ds, int full_screen);
 void cocoa_display_init(DisplayState *ds, int full_screen);
 
 /* vnc.c */
-void vnc_display_init(DisplayState *ds, int display);
+void vnc_display_init(DisplayState *ds, const char *display);
 
 /* ide.c */
 #define MAX_DISKS 4

vnc.c

@@ -1101,10 +1101,18 @@ static void vnc_listen_read(void *opaque)
     }
 }
 
-void vnc_display_init(DisplayState *ds, int display)
+extern int parse_host_port(struct sockaddr_in *saddr, const char *str);
+
+void vnc_display_init(DisplayState *ds, const char *arg)
 {
-    struct sockaddr_in addr;
+    struct sockaddr *addr;
+    struct sockaddr_in iaddr;
+#ifndef _WIN32
+    struct sockaddr_un uaddr;
+#endif
     int reuse_addr, ret;
+    socklen_t addrlen;
+    const char *p;
     VncState *vs;
 
     vs = qemu_mallocz(sizeof(VncState));
@@ -1126,25 +1134,60 @@ void vnc_display_init(DisplayState *ds, int display)
     if (!vs->kbd_layout)
 	exit(1);
 
-    vs->lsock = socket(PF_INET, SOCK_STREAM, 0);
-    if (vs->lsock == -1) {
-	fprintf(stderr, "Could not create socket\n");
-	exit(1);
+    vs->ds->data = NULL;
+    vs->ds->dpy_update = vnc_dpy_update;
+    vs->ds->dpy_resize = vnc_dpy_resize;
+    vs->ds->dpy_refresh = vnc_dpy_refresh;
+
+    memset(vs->dirty_row, 0xFF, sizeof(vs->dirty_row));
+
+    vnc_dpy_resize(vs->ds, 640, 400);
+
+#ifndef _WIN32
+    if (strstart(arg, "unix:", &p)) {
+	addr = (struct sockaddr *)&uaddr;
+	addrlen = sizeof(uaddr);
+
+	vs->lsock = socket(PF_UNIX, SOCK_STREAM, 0);
+	if (vs->lsock == -1) {
+	    fprintf(stderr, "Could not create socket\n");
+	    exit(1);
+	}
+
+	uaddr.sun_family = AF_UNIX;
+	memset(uaddr.sun_path, 0, 108);
+	snprintf(uaddr.sun_path, 108, "%s", p);
+
+	unlink(uaddr.sun_path);
+    } else
+#endif
+    {
+	addr = (struct sockaddr *)&iaddr;
+	addrlen = sizeof(iaddr);
+
+	vs->lsock = socket(PF_INET, SOCK_STREAM, 0);
+	if (vs->lsock == -1) {
+	    fprintf(stderr, "Could not create socket\n");
+	    exit(1);
+	}
+
+	if (parse_host_port(&iaddr, arg) < 0) {
+	    fprintf(stderr, "Could not parse VNC address\n");
+	    exit(1);
+	}
+	    
+	iaddr.sin_port = htons(ntohs(iaddr.sin_port) + 5900);
+
+	reuse_addr = 1;
+	ret = setsockopt(vs->lsock, SOL_SOCKET, SO_REUSEADDR,
+			 (const char *)&reuse_addr, sizeof(reuse_addr));
+	if (ret == -1) {
+	    fprintf(stderr, "setsockopt() failed\n");
+	    exit(1);
+	}
     }
 
-    addr.sin_family = AF_INET;
-    addr.sin_port = htons(5900 + display);
-    memset(&addr.sin_addr, 0, sizeof(addr.sin_addr));
-
-    reuse_addr = 1;
-    ret = setsockopt(vs->lsock, SOL_SOCKET, SO_REUSEADDR,
-		     (const char *)&reuse_addr, sizeof(reuse_addr));
-    if (ret == -1) {
-	fprintf(stderr, "setsockopt() failed\n");
-	exit(1);
-    }
-
-    if (bind(vs->lsock, (struct sockaddr *)&addr, sizeof(addr)) == -1) {
+    if (bind(vs->lsock, addr, addrlen) == -1) {
 	fprintf(stderr, "bind() failed\n");
 	exit(1);
     }
@@ -1158,13 +1201,4 @@ void vnc_display_init(DisplayState *ds, int display)
     if (ret == -1) {
 	exit(1);
     }
-
-    vs->ds->data = NULL;
-    vs->ds->dpy_update = vnc_dpy_update;
-    vs->ds->dpy_resize = vnc_dpy_resize;
-    vs->ds->dpy_refresh = vnc_dpy_refresh;
-
-    memset(vs->dirty_row, 0xFF, sizeof(vs->dirty_row));
-
-    vnc_dpy_resize(vs->ds, 640, 400);
 }