If CONFIG_PLUGINS is enabled then lets enable testing for all our TCG
targets. This is a simple smoke test that ensure we don't crash or
otherwise barf out by running each plugin against each test.
There is a minor knock on effect for additional runners which need
specialised QEMU_OPTS which will also need to declare a plugin version
of the runner. If this gets onerous we might need to add another
helper.
Checking the results of the plugins is left for a later exercise.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
This is a very slow running test which we only enable explicitly.
However having it in the TESTS lists would confuse additional tests
like the plugins test which want to run on all currently enabled
tests.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Otherwise clever expanders like the plugins test get unstuck.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
This will important for ensuring the plugin test variants will also
work.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Since moving where the tests are run the path to config-host.mak has
been wrong. This doesn't affect much but things like the time fallback
for CONFIG_DEBUG_TCG and will also get in the way of checking for
PLUGINS support.
Fixes: fc76c56d3f
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
* Fix the CBAR register implementation for Cortex-A53,
Cortex-A57, Cortex-A72
* Fix direct booting of Linux kernels on emulated CPUs
which have an AArch32 EL3 (incorrect NSACR settings
meant they could not access the FPU)
* semihosting cleanup: do more work at translate time
and less work at runtime
-----BEGIN PGP SIGNATURE-----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=/0m2
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20190927' into staging
target-arm queue:
* Fix the CBAR register implementation for Cortex-A53,
Cortex-A57, Cortex-A72
* Fix direct booting of Linux kernels on emulated CPUs
which have an AArch32 EL3 (incorrect NSACR settings
meant they could not access the FPU)
* semihosting cleanup: do more work at translate time
and less work at runtime
# gpg: Signature made Fri 27 Sep 2019 15:32:43 BST
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* remotes/pmaydell/tags/pull-target-arm-20190927:
hw/arm/boot: Use the IEC binary prefix definitions
hw/arm/boot.c: Set NSACR.{CP11,CP10} for NS kernel boots
tests/tcg: add linux-user semihosting smoke test for ARM
target/arm: remove run-time semihosting checks for linux-user
target/arm: remove run time semihosting checks
target/arm: handle A-profile semihosting at translate time
target/arm: handle M-profile semihosting at translate time
tests/tcg: clean-up some comments after the de-tangling
target/arm: fix CBAR register for AArch64 CPUs
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
# Conflicts:
# tests/tcg/arm/Makefile.target
We already use semihosting for the system stuff so this is a simple
smoke test to ensure we are working OK on linux-user.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20190913151845.12582-7-alex.bennee@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
These were missed in the recent de-tangling so have been updated to be
more actuate. I've also built up ARM_TESTS in a manner similar to
AARCH64_TESTS for better consistency.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20190913151845.12582-2-alex.bennee@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This adds two new tests that re-use the memory test to check basic
record replay functionality is still working. We have to define our
own runners rather than using the default pattern as we want to change
the test name but re-use the memory binary.
We declare the test binaries as PHONY as they don't really exist.
[AJB: A better test would output some sort of timer value or other
otherwise variable value so we could compare the record and replay
outputs and ensure they match]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Cc: Pavel Dovgalyuk <dovgaluk@ispras.ru>
This is broadly similar to the existing fcvt test for ARM but using
the generic float testing framework. We should be able to pare down
the ARM fcvt test case to purely half-precision with or without the
Alt HP provision.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
This is a generic floating point multiply and accumulate test for
single precision floating point values. I've split of the common float
functions into a helper library so additional tests can use the same
common code.
As I don't have references for all architectures I've allowed some
flexibility for tests to pass without reference files. They can be
added as we get collect them.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Now we have fixed the signal delivary bug we can remove this horrible
hack from the system.
Cc: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
These were missed in the recent de-tangling so have been updated to be
more actuate. I've also built up ARM_TESTS in a manner similar to
AARCH64_TESTS for better consistency.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Let's add a test that especially verifies that no data will be touched
in case we cross page boundaries and one page access triggers a fault.
Before the fault-safe handling fixes, the test failes with:
TEST mvc on s390x
data modified during a fault
make[2]: *** [../Makefile.target:116: run-mvc] Error 1
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Let's add the simple test based on the example from the PoP.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Now Buster is released we can unify our cross build images for both
QEMU and tests.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
This hides the new build artefacts from the re-organised TCG tests when
you are doing an in-source build.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Avoid the repeated inclusions of config-target.mak, which have
risks of namespace pollution, and instead build minimal configuration
files in a configuration script. The same configuration files can
also be included in Makefile and Makefile.qemu
[AJB 10/09/19]
In the original PR this had inadvertently enabled tests
for ppc64abi32. However as the rest of the multiarch tests work rather
than disabling the otherwise correctly functioning build I've just
skipped the failing linux-test test. For some reason I can't debug it
with TCG so I'm leaving that to the PPC maintainers to look at.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20190807143523.15917-4-pbonzini@redhat.com>
[AJB: s/docker/container/, rm last bits from configure, ppc6432abi hack]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: Richard Henderson <rth@twiddle.net>
Rename Makefile.probe to Makefile.prereqs and make it actually
define rules for the tests.
Rename Makefile to Makefile.target, since it is not a toplevel
makefile.
Rename Makefile.include to Makefile.qemu and disentangle it
from the QEMU Makefile.target, so that it is invoked recursively
by tests/Makefile.include. Tests are now placed in
tests/tcg/$(TARGET).
Drop the usage of TARGET_BASE_ARCH, which is ignored by everything except
x86_64 and aarch64. Fix x86 tests by using -cpu max and, while
at it, standardize on QEMU_OPTS for aarch64 tests too.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20190807143523.15917-3-pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
For i386 specifically, this allows using the host GCC
to compile the i386 tests. But, it should really be
done for all targets, unless we want to pass $(EXTRA_CFLAGS)
directly as part of $(CC).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20190807143523.15917-2-pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Podman requires a little bit of additional magic to the uid mapping
which was already done for the normal RunCommand. We simplify the
logic by pushing it directly into the Docker::run method to avoid
instantiating an extra Docker() object and ensure the CC command
always runs as the current user.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
At this moment, the only MIPS CPUs that are emulated in QEMU and
support MSA extension are R5600 (mips32r5), and I6400/I6500 (mips64r6).
Therefore, mips32r5 and mips64r6 are the only ISAs that could support
MSA in QEMU. This means mips32r6 currently do not make much sense, and
mips32r5 support for MSA tests is needed, which is done by this patch.
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <1566216496-17375-38-git-send-email-aleksandar.markovic@rt-rk.com>
There is a need for printing input and output data for failure cases,
for debugging purpose. This is achieved by this patch, and only if a
preprocessor constant is manually set to 1. (Assumption is that the
need for such printout is relatively rare.)
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <1566216496-17375-37-git-send-email-aleksandar.markovic@rt-rk.com>
A side effect of piping the output to head is squash the exit status
of the diff command. Fix this by only doing the pipe if the diff
failed and then ensuring the status is non-zero.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
We never shipped the reference data in the source tree because it's
quite big (64M). As a result the only option is to generate it
locally. Although we have a rule to generate the reference file we
missed the dependency and location changes, probably because it's only
run for SLOW test runs.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Correct MSA test compilation and execution order, for the sake of
consistence.
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <1562068213-11307-4-git-send-email-aleksandar.markovic@rt-rk.com>
- fix for a tcg test case
- halt/clear support for vfio-ccw, and use a new helper
-----BEGIN PGP SIGNATURE-----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=0dnG
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/cohuck/tags/s390x-20190701' into staging
- cleanup/refactoring in the cpu feature code
- fix for a tcg test case
- halt/clear support for vfio-ccw, and use a new helper
# gpg: Signature made Mon 01 Jul 2019 12:08:41 BST
# gpg: using RSA key C3D0D66DC3624FF6A8C018CEDECF6B93C6F02FAF
# gpg: issuer "cohuck@redhat.com"
# gpg: Good signature from "Cornelia Huck <conny@cornelia-huck.de>" [unknown]
# gpg: aka "Cornelia Huck <huckc@linux.vnet.ibm.com>" [full]
# gpg: aka "Cornelia Huck <cornelia.huck@de.ibm.com>" [full]
# gpg: aka "Cornelia Huck <cohuck@kernel.org>" [unknown]
# gpg: aka "Cornelia Huck <cohuck@redhat.com>" [unknown]
# Primary key fingerprint: C3D0 D66D C362 4FF6 A8C0 18CE DECF 6B93 C6F0 2FAF
* remotes/cohuck/tags/s390x-20190701:
s390x: add cpu feature/model files to KVM section
vfio-ccw: support async command subregion
vfio-ccw: use vfio_set_irq_signaling
s390x/cpumodel: Prepend KDSA features with "KDSA"
s390x/cpumodel: Rework CPU feature definition
tests/tcg/s390x: Fix alignment of csst parameter list
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fix certian test cases for MSA pack instructions.
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <1561543629-20327-8-git-send-email-aleksandar.markovic@rt-rk.com>
Add files for MSA MIPS32R6 target testings (copiling and running).
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <1561543629-20327-7-git-send-email-aleksandar.markovic@rt-rk.com>
Add files for MSA big-endian target testings (copiling and running).
Little-endian files are renamed and ammended too.
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <1561543629-20327-6-git-send-email-aleksandar.markovic@rt-rk.com>
Amend tests for MSA int multiply instructions.
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <1561543629-20327-5-git-send-email-aleksandar.markovic@rt-rk.com>
Add tests for instructions whose result depends on the value in destination
register (prior to instruction execution).
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <1561543629-20327-4-git-send-email-aleksandar.markovic@rt-rk.com>
Add tests for MSA bit move instructions.
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <1561543629-20327-2-git-send-email-aleksandar.markovic@rt-rk.com>
definitions.
-----BEGIN PGP SIGNATURE-----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=Bcc2
-----END PGP SIGNATURE-----
Merge tag 's390x-tcg-2019-06-21' into s390-next-staging
One fix for a tcg test case and two cleanups/refactorings of cpu feature
definitions.
# gpg: Signature made Fri 21 Jun 2019 03:37:37 PM CEST
# gpg: using RSA key 1BD9CAAD735C4C3A460DFCCA4DDE10F700FF835A
# gpg: issuer "david@redhat.com"
# gpg: Good signature from "David Hildenbrand <david@redhat.com>" [full]
# gpg: aka "David Hildenbrand <davidhildenbrand@gmail.com>" [full]
* tag 's390x-tcg-2019-06-21':
s390x/cpumodel: Prepend KDSA features with "KDSA"
s390x/cpumodel: Rework CPU feature definition
tests/tcg/s390x: Fix alignment of csst parameter list
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The parameter list given in general register 1 shall be aligned
on a quadword boundary. This test currently succeeds or fails
depending on the compiler version used and the accidential layout
of the function's stack frame.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Add tests for cases when destination register is the same as one
of source registers.
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <1561031359-6727-3-git-send-email-aleksandar.markovic@rt-rk.com>
For better appearance and usefullnes, include ISA/ASE name and
instruction group name in the output of tests. For example, all
this data will be displayed for FMAX_A.W test:
| MSA | Float Max Min | FMAX_A.W |
| PASS: 80 | FAIL: 0 | elapsed time: 0.16 ms |
(the data will be displayed in one row; they are presented here in two
rows not to exceed the width of the commit message)
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <1561031359-6727-2-git-send-email-aleksandar.markovic@rt-rk.com>
The ARM pseudocode installs the error_code into the original
pointer, not the encrypted pointer. The difference applies
within the 7 bits of pac data; the result should be the sign
extension of bit 55.
Add a testcase to that effect.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Instead of doing the full real to 64 bit dance we are attempting to
leverage Xen's PVH boot spec to go from 32 bit to 64 bit.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Since we only run build the multiarch tests and we use a fully
resolved path for the crt object we don't need the wildcard or VPATH
messing about.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
If we've truncated a wider read we can detect the condition earlier by
looking at the number of zeros we've read. So we don't trip up on
cases where we have written zeros to the start of the buffer we also
ensure we only start each offset read from the right address.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Add README for MSA tests. This is just to explain how to run tests even
without Makefile. Makefile will be provided later on.
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <1559838440-9866-11-git-send-email-aleksandar.markovic@rt-rk.com>
Add function reset_msa_registers() and utilize it in each MSA test.
This is needed to ensure independency of test results on the state of
MSA registers before test execution. This also allows for correction
of tests for VSHF* instructions, that are now independent on the
previous state of MSA registers.
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <1559838440-9866-9-git-send-email-aleksandar.markovic@rt-rk.com>
Move tests for <MUL|MULR>_Q.<H|B> from "integer multiply" directory
to "fixed-point multiply" directory, since they do not operate on
integers, but on fixed point numbers.
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <1559838440-9866-8-git-send-email-aleksandar.markovic@rt-rk.com>
Taylor Simpson