Commit Graph

1820 Commits (09be82ce53e8269412544521d449c44305beccf3)

Author SHA1 Message Date
Richard Henderson 240c08d099 tcg: Support cross-class moves without instruction support
PowerPC Altivec does not support direct moves between vector registers
and general registers.  So when tcg_out_mov fails, we can use the
backing memory for the temporary to perform the move.

Acked-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-05-13 14:44:03 -07:00
Richard Henderson 78113e83e0 tcg: Return bool success from tcg_out_mov
This patch merely changes the interface, aborting on all failures,
of which there are currently none.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-05-13 14:44:03 -07:00
Richard Henderson c16f52b2c5 tcg/arm: Use tcg_out_mov_reg in tcg_out_mov
We have a function that takes an additional condition parameter
over the standard backend interface.  It already takes care of
eliding no-op moves.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-05-13 14:44:03 -07:00
Richard Henderson d63e3b6e69 tcg: Assert fixed_reg is read-only
The only fixed_reg is cpu_env, and it should not be modified
during any TB.  Therefore code that tries to special-case moves
into a fixed_reg is dead.  Remove it.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-05-13 14:44:03 -07:00
Richard Henderson 53229a7703 tcg: Specify optional vector requirements with a list
Replace the single opcode in .opc with a null-terminated
array in .opt_opc.  We still require that all opcodes be
used with the same .vece.

Validate the contents of this list with CONFIG_DEBUG_TCG.
All tcg_gen_*_vec functions will check any list active
during .fniv expansion.  Swap the active list in and out
as we expand other opcodes, or take control away from the
front-end function.

Convert all existing vector aware front ends.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-05-13 14:44:03 -07:00
Richard Henderson ce27c5d1a3 tcg: Allow add_vec, sub_vec, neg_vec, not_vec to be expanded
PowerPC Altivec does not support add and subtract of 64-bit elements.
Prepare for that configuration by not assuming the operation is
universally supported.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-05-13 14:44:03 -07:00
Richard Henderson ac383dde33 tcg: Do not recreate INDEX_op_neg_vec unless supported
Use tcg_can_emit_vec_op instead of just TCG_TARGET_HAS_neg_vec,
so that we check the type and vece for the actual operation.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-05-13 14:26:28 -07:00
David Hildenbrand e1227bb6e5 tcg: Implement tcg_gen_gvec_3i()
Let's add tcg_gen_gvec_3i(), similar to tcg_gen_gvec_2i(), however
without introducing "gen_helper_gvec_3i *fnoi", as it isn't needed
for now.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190416185301.25344-2-david@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-05-13 14:26:28 -07:00
Richard Henderson b4b82d7e9c tcg/arm: Restrict constant pool displacement to 12 bits
This will not necessarily restrict the size of the TB, since for v7
the majority of constant pool usage is for calls from the out-of-line
ldst code, which is already at the end of the TB.  But this does
allow us to save one insn per reference on the off-chance.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-04-25 10:39:39 -07:00
Richard Henderson a7cdaf710f tcg/ppc: Allow the constant pool to overflow at 32k
There is no point in coding for a 2GB offset when the max TB size
is already limited to 64k.  If we further restrict to 32k then we
can eliminate the extra ADDIS instruction.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-04-24 13:05:28 -07:00
Richard Henderson aeee05f53a tcg: Restart TB generation after out-of-line ldst overflow
This is part c of relocation overflow handling.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-04-24 13:05:28 -07:00
Richard Henderson 1768987b73 tcg: Restart TB generation after constant pool overflow
This is part b of relocation overflow handling.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-04-24 13:05:28 -07:00
Richard Henderson 7ecd02a06f tcg: Restart TB generation after relocation overflow
If the TB generates too much code, such that backend relocations
overflow, try again with a smaller TB.  In support of this, move
relocation processing from a random place within tcg_out_op, in
the handling of branch opcodes, to a new function at the end of
tcg_gen_code.

This is not a complete solution, as there are additional relocs
generated for out-of-line ldst handling and constant pools.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-04-24 13:05:21 -07:00
Richard Henderson 6e6c4efed9 tcg: Restart after TB code generation overflow
If a TB generates too much code, try again with fewer insns.

Fixes: https://bugs.launchpad.net/bugs/1824853
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-04-24 13:04:33 -07:00
Richard Henderson 464c2969d5 tcg/aarch64: Support INDEX_op_extract2_{i32,i64}
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-04-24 13:04:33 -07:00
Richard Henderson 3b832d67a9 tcg/arm: Support INDEX_op_extract2_i32
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-04-24 13:04:33 -07:00
Richard Henderson c6fb8c0cf7 tcg/i386: Support INDEX_op_extract2_{i32,i64}
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-04-24 13:04:33 -07:00
Richard Henderson b0a6056719 tcg: Use extract2 in tcg_gen_deposit_{i32,i64}
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-04-24 13:04:33 -07:00
Richard Henderson 02616bad6f tcg: Use deposit and extract2 in tcg_gen_shifti_i64
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-04-24 13:04:33 -07:00
Richard Henderson fce1296f13 tcg: Add INDEX_op_extract2_{i32,i64}
This will let backends implement the double-word shift operation.

Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-04-24 13:04:33 -07:00
David Hildenbrand 2089fcc9e7 tcg: Implement tcg_gen_extract2_{i32,i64}
Will be helpful for s390x. Input 128 bit and output 64 bit only,
which is sufficient for now.

Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190225154204.26751-1-david@redhat.com>
[rth: Add matching tcg_gen_extract2_i32.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-04-24 13:04:33 -07:00
Markus Armbruster 3de2faa9a8 tcg: Simplify how dump_exec_info() prints
dump_exec_info() takes an fprintf()-like callback and a FILE * to pass
to it.

Its only caller hmp_info_jit() passes monitor_fprintf() and the
current monitor cast to FILE *.  monitor_fprintf() casts it right
back, and is otherwise identical to monitor_printf().  The
type-punning is ugly.

Drop the callback, and call qemu_printf() instead.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190417191805.28198-5-armbru@redhat.com>
2019-04-18 22:18:59 +02:00
Markus Armbruster d4c51a0af3 tcg: Simplify how dump_opcount_info() prints
dump_opcount_info() takes an fprintf()-like callback and a FILE * to
pass to it.

Its only caller hmp_info_opcount() passes monitor_fprintf() and the
current monitor cast to FILE *.  monitor_fprintf() casts it right
back, and is otherwise identical to monitor_printf().  The
type-punning is ugly.

Drop the callback, and call qemu_printf() instead.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190417191805.28198-4-armbru@redhat.com>
2019-04-18 22:18:59 +02:00
Richard Henderson 9e564a1dde tcg: Remove TODO file
The last update to this file was 9 years ago.  In the meantime,
4 of the 6 ideas have actually been completed.  The lat two do
not actually make sense anymore.

Suggested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-02-21 10:22:24 -08:00
Mark Cave-Ayland 3115584d39 tcg/i386: fix unsigned vector saturating arithmetic
Due to a cut/paste error in the original implementation, the unsigned
vector saturating arithmetic was erroneously being calculated as signed
vector saturating arithmetic.

Fixes: 8ffafbcec2 ("tcg/i386: Implement vector saturating arithmetic")
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20190207224258.426-1-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-02-11 08:52:44 -08:00
Richard Henderson bef16ab4e6 tcg: Diagnose referenced labels that have not been emitted
Currently, a jump to a label that is not defined anywhere will
be emitted not be relocated.  This results in a jump to a random
jump target.  With tcg debugging, print a diagnostic to the -d op
file and abort.

This could help debug or detect errors like
c2d9644e6d ("target/arm: Fix crash on conditional instruction in an IT block")

Reported-by: Roman Kapl <code@rkapl.cz>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-02-11 08:52:44 -08:00
Thomas Huth fb0343d5b4 tcg: Fix LGPL version number
It's either "GNU *Library* General Public version 2" or "GNU Lesser
General Public version *2.1*", but there was no "version 2.0" of the
"Lesser" library. So assume that version 2.1 is meant here.

Cc: Richard Henderson <rth@twiddle.net>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <1548252536-6242-5-git-send-email-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-01-30 11:01:52 +01:00
Richard Henderson e77c89fb08 cputlb: Remove static tlb sizing
Now that all tcg backends support TCG_TARGET_IMPLEMENTS_DYN_TLB,
remove the define and the old code.

Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-01-28 07:04:35 -08:00
Richard Henderson 0a9a83d6bf tcg/tci: enable dynamic TLB sizing
This is automatic due to TCI using the other softtlb macros.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-01-28 07:04:10 -08:00
Richard Henderson ac33373e0e tcg/mips: enable dynamic TLB sizing
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-01-28 07:04:10 -08:00
Richard Henderson a31aa4ce00 tcg/mips: Fix tcg_out_qemu_ld_slow_path
Patch the branch after it has been emitted rather
than before it exists.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-01-28 07:04:10 -08:00
Richard Henderson cd7d3cb7a2 tcg/arm: enable dynamic TLB sizing
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-01-28 07:04:10 -08:00
Richard Henderson 41b70f220b tcg/riscv: enable dynamic TLB sizing
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-01-28 07:04:24 -08:00
Richard Henderson 4f47e338f6 tcg/s390: enable dynamic TLB sizing
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-01-28 07:04:10 -08:00
Richard Henderson 17ff9f7801 tcg/sparc: enable dynamic TLB sizing
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-01-28 07:04:10 -08:00
Richard Henderson 644f591ab0 tcg/ppc: enable dynamic TLB sizing
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-01-28 07:04:10 -08:00
Richard Henderson f7bcd96669 tcg/aarch64: enable dynamic TLB sizing
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-01-28 07:04:10 -08:00
Emilio G. Cota 54eaf40b8f tcg/i386: enable dynamic TLB sizing
As the following experiments show, this series is a net perf gain,
particularly for memory-heavy workloads. Experiments are run on an
Intel(R) Xeon(R) Gold 6142 CPU @ 2.60GHz.

1. System boot + shudown, debian aarch64:

- Before (v3.1.0):
 Performance counter stats for './die.sh v3.1.0' (10 runs):

       9019.797015      task-clock (msec)         #    0.993 CPUs utilized            ( +-  0.23% )
    29,910,312,379      cycles                    #    3.316 GHz                      ( +-  0.14% )
    54,699,252,014      instructions              #    1.83  insn per cycle           ( +-  0.08% )
    10,061,951,686      branches                  # 1115.541 M/sec                    ( +-  0.08% )
       172,966,530      branch-misses             #    1.72% of all branches          ( +-  0.07% )

       9.084039051 seconds time elapsed                                          ( +-  0.23% )

- After:
 Performance counter stats for './die.sh tlb-dyn-v5' (10 runs):

       8624.084842      task-clock (msec)         #    0.993 CPUs utilized            ( +-  0.23% )
    28,556,123,404      cycles                    #    3.311 GHz                      ( +-  0.13% )
    51,755,089,512      instructions              #    1.81  insn per cycle           ( +-  0.05% )
     9,526,513,946      branches                  # 1104.641 M/sec                    ( +-  0.05% )
       166,578,509      branch-misses             #    1.75% of all branches          ( +-  0.19% )

       8.680540350 seconds time elapsed                                          ( +-  0.24% )

That is, a 4.4% perf increase.

2. System boot + shutdown, ubuntu 18.04 x86_64:

- Before (v3.1.0):
      56100.574751      task-clock (msec)         #    1.016 CPUs utilized            ( +-  4.81% )
   200,745,466,128      cycles                    #    3.578 GHz                      ( +-  5.24% )
   431,949,100,608      instructions              #    2.15  insn per cycle           ( +-  5.65% )
    77,502,383,330      branches                  # 1381.490 M/sec                    ( +-  6.18% )
       844,681,191      branch-misses             #    1.09% of all branches          ( +-  3.82% )

      55.221556378 seconds time elapsed                                          ( +-  5.01% )

- After:
      56603.419540      task-clock (msec)         #    1.019 CPUs utilized            ( +- 10.19% )
   202,217,930,479      cycles                    #    3.573 GHz                      ( +- 10.69% )
   439,336,291,626      instructions              #    2.17  insn per cycle           ( +- 14.14% )
    80,538,357,447      branches                  # 1422.853 M/sec                    ( +- 16.09% )
       776,321,622      branch-misses             #    0.96% of all branches          ( +-  3.77% )

      55.549661409 seconds time elapsed                                          ( +- 10.44% )

No improvement (within noise range). Note that for this workload,
increasing the time window too much can lead to perf degradation,
since it flushes the TLB *very* frequently.

3. x86_64 SPEC06int:

           x86_64-softmmu speedup vs. v3.1.0 for SPEC06int (test set)
            Host: Intel(R) Xeon(R) Gold 6142 CPU @ 2.60GHz (Skylake)

5.5 +------------------------------------------------------------------------+
    |                   +-+                                                  |
  5 |-+.................+-+...............................tlb-dyn-v5.......+-|
    |                   * *                                                  |
4.5 |-+.................*.*................................................+-|
    |                   * *                                                  |
  4 |-+.................*.*................................................+-|
    |                   * *                                                  |
3.5 |-+.................*.*................................................+-|
    |                   * *                                                  |
  3 |-+......+-+*.......*.*................................................+-|
    |        *  *       * *                                                  |
2.5 |-+......*..*.......*.*.................................+-+*...........+-|
    |        *  *       * *                                 *  *             |
  2 |-+......*..*.......*.*.................................*..*...........+-|
    |        *  *       * *                                 *  *  +-+        |
1.5 |-+......*..*.......*.*.................................*..*.*+-+.*+-+.+-|
    |        *  * *+-+  * *  +-+       *+-+  +-+       +-+  *  * *  * *  *   |
  1 |++++-+*+*++*+*++*++*+*++*+*+++-+*+*+-++*+-++++-++++-+++*++*+*++*+*++*+++|
    |   *  * *  * *  *  * *  * *  *  * *  * *  *  * *  * *  *  * *  * *  *   |
0.5 +------------------------------------------------------------------------+
  400.perlb401.bzip403.g429445.g456.hm462.libq464.h471.omn47483.xalancbgeomean
  png: https://imgur.com/YRF90f7

That is, a 1.51x average speedup over the baseline, with a max speedup
of 5.17x.

Here's a different look at the SPEC06int results, using KVM as the baseline:

             x86_64-softmmu slowdown vs. KVM for SPEC06int (test set)
             Host: Intel(R) Xeon(R) Gold 6142 CPU @ 2.60GHz (Skylake)

25 +---------------------------------------------------------------------------+
   |                   +-+                                        +-+          |
   |                   * *                             +-+      v3.1.0         |
   |                   * *                             +-+  tlb-dyn-v5         |
   |                   * *                             * *        +-+          |
20 |-+.................*.*.............................*.+-+......*.*........+-|
   |                   * *                             * # #      * *          |
   |        +-+        * *                             * # #      * *          |
   |        * *        * *                             * # #      * *          |
15 |-+......*.*........*.*.............................*.#.#......*.+-+......+-|
   |        * *        * *                             * # #      * #|#        |
   |        * *        * *        +-+                  * # #      * +-+        |
   |        * *  +-+   * *        ++-+       +-+       * # #      * # # +-+    |
   |        * *  +-+   * *        * ##       *|   +-+  * # #      * # # +-+    |
10 |-+......*.*..*.+-+.*.*........*.##.......++-+.*.+-+*.#.#......*.#.#.*.*..+-|
   |        * *  * +-+ * *        * ## +-+   *# # * # #* # # +-+  * # # * *    |
   |        * *  * # # * *  +-+   * ## * +-+ *# # * # #* # # * *  * # # *+-+   |
   |        * *  * # # * *  * +-+ * ## * # # *# # * # #* # # * *  * # # * ##   |
 5 |-+......*.+-+*.#.#.*.*..*.#.#.*.##.*.#.#.*#.#.*.#.#*.#.#.*.*..*.#.#.*.##.+-|
   |        * # #* # # * +-+* # # * ## * # # *# # * # #* # # * *  * # # * ##   |
   |        * # #* # # * # #* # # * ## * # # *# # * # #* # # * +-+* # # * ##   |
   |   ++-+ * # #* # # * # #* # # * ## * # # *# # * # #* # # * # #* # # * ##   |
   |+++*#+#+*+#+#*+#+#+*+#+#*+#+#+*+##+*+#+#+*#+#+*+#+#*+#+#+*+#+#*+#+#+*+##+++|
 0 +---------------------------------------------------------------------------+
 400.perlbe401.bzi403.gc429445.go456.h462.libqu464.h471.omne4483.xalancbmgeomean
  png: https://imgur.com/YzAMNEV

After this series, we bring down the average SPEC06int slowdown vs KVM
from 11.47x to 7.58x.

Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Message-Id: <20190116170114.26802-4-cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-01-28 07:03:34 -08:00
Emilio G. Cota 86e1eff8bc tcg: introduce dynamic TLB sizing
Disabled in all TCG backends for now.

Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Message-Id: <20190116170114.26802-3-cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-01-28 07:03:34 -08:00
Richard Henderson 93f332a503 tcg/aarch64: Implement vector minmax arithmetic
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-01-28 07:03:34 -08:00
Richard Henderson d32648d445 tcg/aarch64: Implement vector saturating arithmetic
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-01-28 07:03:34 -08:00
Richard Henderson bc37faf4cb tcg/i386: Implement vector minmax arithmetic
The avx instruction set does not directly provide MO_64.
We can still implement 64-bit with comparison and vpblendvb.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-01-28 07:03:34 -08:00
Richard Henderson 8ffafbcec2 tcg/i386: Implement vector saturating arithmetic
Only MO_8 and MO_16 are implemented, since that's all the
instruction set provides.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-01-28 07:03:34 -08:00
Richard Henderson 44f1441dbe tcg/i386: Split subroutines out of tcg_expand_vec_op
This routine was becoming too large.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-01-28 07:03:34 -08:00
Richard Henderson dd0a0fcdd8 tcg: Add opcodes for vector minmax arithmetic
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-01-28 07:03:34 -08:00
Richard Henderson 8afaf05066 tcg: Add opcodes for vector saturated arithmetic
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-01-28 07:03:34 -08:00
Richard Henderson 5d6acdd4a4 tcg: Add write_aofs to GVecGen4
This allows writing 2 output, 3 input operations.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-01-28 07:03:34 -08:00
Richard Henderson f550805d83 tcg: Add gvec expanders for nand, nor, eqv
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-01-28 07:03:34 -08:00
Richard Henderson 9a9eda78e4 tcg: Add logical simplifications during gvec expand
We handle many of these during integer expansion, and the
rest of them during integer optimization.

Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-01-28 07:03:34 -08:00
Paolo Bonzini 7d37435bd5 avoid TABs in files that only contain a few
Most files that have TABs only contain a handful of them.  Change
them to spaces so that we don't confuse people.

disas, standard-headers, linux-headers and libdecnumber are imported
from other projects and probably should be exempted from the check.
Outside those, after this patch the following files still contain both
8-space and TAB sequences at the beginning of the line.  Many of them
have a majority of TABs, or were initially committed with all tabs.

    bsd-user/i386/target_syscall.h
    bsd-user/x86_64/target_syscall.h
    crypto/aes.c
    hw/audio/fmopl.c
    hw/audio/fmopl.h
    hw/block/tc58128.c
    hw/display/cirrus_vga.c
    hw/display/xenfb.c
    hw/dma/etraxfs_dma.c
    hw/intc/sh_intc.c
    hw/misc/mst_fpga.c
    hw/net/pcnet.c
    hw/sh4/sh7750.c
    hw/timer/m48t59.c
    hw/timer/sh_timer.c
    include/crypto/aes.h
    include/disas/bfd.h
    include/hw/sh4/sh.h
    libdecnumber/decNumber.c
    linux-headers/asm-generic/unistd.h
    linux-headers/linux/kvm.h
    linux-user/alpha/target_syscall.h
    linux-user/arm/nwfpe/double_cpdo.c
    linux-user/arm/nwfpe/fpa11_cpdt.c
    linux-user/arm/nwfpe/fpa11_cprt.c
    linux-user/arm/nwfpe/fpa11.h
    linux-user/flat.h
    linux-user/flatload.c
    linux-user/i386/target_syscall.h
    linux-user/ppc/target_syscall.h
    linux-user/sparc/target_syscall.h
    linux-user/syscall.c
    linux-user/syscall_defs.h
    linux-user/x86_64/target_syscall.h
    slirp/cksum.c
    slirp/if.c
    slirp/ip.h
    slirp/ip_icmp.c
    slirp/ip_icmp.h
    slirp/ip_input.c
    slirp/ip_output.c
    slirp/mbuf.c
    slirp/misc.c
    slirp/sbuf.c
    slirp/socket.c
    slirp/socket.h
    slirp/tcp_input.c
    slirp/tcpip.h
    slirp/tcp_output.c
    slirp/tcp_subr.c
    slirp/tcp_timer.c
    slirp/tftp.c
    slirp/udp.c
    slirp/udp.h
    target/cris/cpu.h
    target/cris/mmu.c
    target/cris/op_helper.c
    target/sh4/helper.c
    target/sh4/op_helper.c
    target/sh4/translate.c
    tcg/sparc/tcg-target.inc.c
    tests/tcg/cris/check_addo.c
    tests/tcg/cris/check_moveq.c
    tests/tcg/cris/check_swap.c
    tests/tcg/multiarch/test-mmap.c
    ui/vnc-enc-hextile-template.h
    ui/vnc-enc-zywrle.h
    util/envlist.c
    util/readline.c

The following have only TABs:

    bsd-user/i386/target_signal.h
    bsd-user/sparc64/target_signal.h
    bsd-user/sparc64/target_syscall.h
    bsd-user/sparc/target_signal.h
    bsd-user/sparc/target_syscall.h
    bsd-user/x86_64/target_signal.h
    crypto/desrfb.c
    hw/audio/intel-hda-defs.h
    hw/core/uboot_image.h
    hw/sh4/sh7750_regnames.c
    hw/sh4/sh7750_regs.h
    include/hw/cris/etraxfs_dma.h
    linux-user/alpha/termbits.h
    linux-user/arm/nwfpe/fpopcode.h
    linux-user/arm/nwfpe/fpsr.h
    linux-user/arm/syscall_nr.h
    linux-user/arm/target_signal.h
    linux-user/cris/target_signal.h
    linux-user/i386/target_signal.h
    linux-user/linux_loop.h
    linux-user/m68k/target_signal.h
    linux-user/microblaze/target_signal.h
    linux-user/mips64/target_signal.h
    linux-user/mips/target_signal.h
    linux-user/mips/target_syscall.h
    linux-user/mips/termbits.h
    linux-user/ppc/target_signal.h
    linux-user/sh4/target_signal.h
    linux-user/sh4/termbits.h
    linux-user/sparc64/target_syscall.h
    linux-user/sparc/target_signal.h
    linux-user/x86_64/target_signal.h
    linux-user/x86_64/termbits.h
    pc-bios/optionrom/optionrom.h
    slirp/mbuf.h
    slirp/misc.h
    slirp/sbuf.h
    slirp/tcp.h
    slirp/tcp_timer.h
    slirp/tcp_var.h
    target/i386/svm.h
    target/sparc/asi.h
    target/xtensa/core-dc232b/xtensa-modules.inc.c
    target/xtensa/core-dc233c/xtensa-modules.inc.c
    target/xtensa/core-de212/core-isa.h
    target/xtensa/core-de212/xtensa-modules.inc.c
    target/xtensa/core-fsf/xtensa-modules.inc.c
    target/xtensa/core-sample_controller/core-isa.h
    target/xtensa/core-sample_controller/xtensa-modules.inc.c
    target/xtensa/core-test_kc705_be/core-isa.h
    target/xtensa/core-test_kc705_be/xtensa-modules.inc.c
    tests/tcg/cris/check_abs.c
    tests/tcg/cris/check_addc.c
    tests/tcg/cris/check_addcm.c
    tests/tcg/cris/check_addoq.c
    tests/tcg/cris/check_bound.c
    tests/tcg/cris/check_ftag.c
    tests/tcg/cris/check_int64.c
    tests/tcg/cris/check_lz.c
    tests/tcg/cris/check_openpf5.c
    tests/tcg/cris/check_sigalrm.c
    tests/tcg/cris/crisutils.h
    tests/tcg/cris/sys.c
    tests/tcg/i386/test-i386-ssse3.c
    ui/vgafont.h

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20181213223737.11793-3-pbonzini@redhat.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Eric Blake <eblake@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-01-11 15:46:56 +01:00
Paolo Bonzini eae3eb3e18 qemu/queue.h: simplify reverse access to QTAILQ
The new definition of QTAILQ does not require passing the headname,
remove it.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-01-11 15:46:55 +01:00
Paolo Bonzini b58deb344d qemu/queue.h: leave head structs anonymous unless necessary
Most list head structs need not be given a name.  In most cases the
name is given just in case one is going to use QTAILQ_LAST, QTAILQ_PREV
or reverse iteration, but this does not apply to lists of other kinds,
and even for QTAILQ in practice this is only rarely needed.  In addition,
we will soon reimplement those macros completely so that they do not
need a name for the head struct.  So clean up everything, not giving a
name except in the rare case where it is necessary.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-01-11 15:46:55 +01:00
Richard Henderson 4250da1092 tcg: Improve call argument loading
Free the argument register only after we have verified that the
temporary is not already in that register.  This case is likely
now that we are back propagating the preferred register.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-12-26 06:58:43 +11:00
Richard Henderson 25f49c5f15 tcg: Record register preferences during liveness
With these preferences, we can arrange for function call arguments to
be computed into the proper registers instead of requiring extra moves.

Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-12-26 06:58:35 +11:00
Richard Henderson ae36a246ed tcg: Add TCG_OPF_BB_EXIT
Use this to notice the opcodes that exit the TB, which implies
that local temps are really dead and need not be synced.

Previously we so marked the true end of the TB, but that was
immediately overwritten by the la_bb_end invoked by any
TCG_OPF_BB_END opcode, like exit_tb.

Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-12-26 06:58:20 +11:00
Richard Henderson f65a061c39 tcg: Split out more subroutines from liveness_pass_1
Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-12-26 06:58:17 +11:00
Richard Henderson 2616c80821 tcg: Rename and adjust liveness_pass_1 helpers
No need for a "tcg_" prefix for a static function; we already
have another "la_" prefix for indicating liveness analysis.
Pass in nb_globals and nb_temps, as we will already have them
in registers for other loops within the parent function.

Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-12-26 06:58:09 +11:00
Richard Henderson 152c35aab4 tcg: Reindent parts of liveness_pass_1
There are two blocks of the form

    if (foo) {
        stuff1;
        goto bar;
    } else {
    baz:
        stuff2;
    }

which have unnecessary and confusing indentation.
Remove the else and unindent stuff2.

Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-12-26 06:57:57 +11:00
Richard Henderson 1894f69a61 tcg: Dump register preference info with liveness
Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-12-26 06:57:48 +11:00
Richard Henderson d62816f2db tcg: Improve register allocation for matching constraints
Try harder to honor the output_pref.  When we're forced to allocate
a second register for the input, it does not need to use the input
constraint; that will be honored by the register we allocate for the
output and a move is already required.

Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-12-26 06:57:40 +11:00
Richard Henderson 69e3706d2b tcg: Add output_pref to TCGOp
Allocate storage for, but do not yet fill in, per-opcode
preferences for the output operands.  Pass it in to the
register allocation routines for output operands.

Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-12-26 06:57:37 +11:00
Richard Henderson ba87719cd2 tcg: Add preferred_reg argument to tcg_reg_alloc_do_movi
Pass this through to temp_sync.

Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-12-26 06:57:34 +11:00
Richard Henderson 98b4e186c1 tcg: Add preferred_reg argument to temp_sync
Pass this through to tcg_reg_alloc.

Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-12-26 06:57:32 +11:00
Richard Henderson b722452aef tcg: Add preferred_reg argument to temp_load
Pass this through to tcg_reg_alloc.

Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-12-26 06:57:29 +11:00
Richard Henderson b016486e7b tcg: Add preferred_reg argument to tcg_reg_alloc
This new argument will aid register allocation by indicating how
the temporary will be used in future.  If the preference cannot
be satisfied, fall back to the constraints of the current insn.

Short circuit the preference when it cannot be satisfied or if
it does not further constrain the operation.

With an eye toward optimizing function call sequences, optimize
for the preferred_reg set containing a single register.

For the moment, all users pass 0 for preference.

Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-12-26 06:57:06 +11:00
Richard Henderson b4fc67c7af tcg: Add reachable_code_pass
Delete trivially dead code that follows unconditional branches and
noreturn helpers.  These can occur either via optimization or via
the structure of a target's translator following an exception.

Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-12-26 06:40:30 +11:00
Richard Henderson d88a117eaa tcg: Reference count labels
Increment when adding branches, and decrement when removing them.

Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-12-26 06:40:27 +11:00
Richard Henderson 15d7409260 tcg: Add TCG_CALL_NO_RETURN
Remember which helpers have been marked noreturn.

Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-12-26 06:40:24 +11:00
Richard Henderson 3b50352b05 tcg: Renumber TCG_CALL_* flags
Previously, the low 4 bits were used for TCG_CALL_TYPE_MASK,
which was removed in 6a18ae2d29.

Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-12-26 06:40:15 +11:00
Alistair Francis 7a5549f2ae tcg/riscv: Add the target init code
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Michael Clark <mjc@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <dd6e439ab81883974b8fd91f904f6de26ab5d697.1545246859.git.alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-12-26 06:40:02 +11:00
Alistair Francis 92c041c59b tcg/riscv: Add the prologue generation and register the JIT
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Michael Clark <mjc@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <c4d023127967a0217d8d1eabdf5de6c0e8f8c228.1545246859.git.alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-12-26 06:40:02 +11:00
Alistair Francis bdf503819e tcg/riscv: Add the out op decoder
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Michael Clark <mjc@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <7c47f00cb4a9a777120456e0704b4076a5d943ab.1545246859.git.alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-12-26 06:40:02 +11:00
Alistair Francis 03a7d0213d tcg/riscv: Add direct load and store instructions
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Michael Clark <mjc@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <2e047a95c39c007c66cda024c095e29b0ac4c43e.1545246859.git.alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-12-26 06:40:02 +11:00
Alistair Francis efbea94c76 tcg/riscv: Add slowpath load and store instructions
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Michael Clark <mjc@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <1a0a7e8f3347764f212c5efa5c07c9be17efdec6.1545246859.git.alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-12-26 06:40:02 +11:00
Alistair Francis 15840069e1 tcg/riscv: Add branch and jump instructions
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Michael Clark <mjc@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <c356657e627168d89cb5b012b7e21e4efbbe83f3.1545246859.git.alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-12-26 06:40:02 +11:00
Alistair Francis 28ca738e9d tcg/riscv: Add the add2 and sub2 instructions
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <5665a57809e32b35775e8e98fdab898853af37b8.1545246859.git.alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-12-26 06:40:02 +11:00
Alistair Francis 61535d4988 tcg/riscv: Add the out load and store instructions
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Michael Clark <mjc@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <d5d88ff29163788938368bbdbd18815d59cef6a0.1545246859.git.alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-12-26 06:40:02 +11:00
Alistair Francis 27fd64144b tcg/riscv: Add the extract instructions
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Michael Clark <mjc@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <c4d2afba46efefa9388cf3205fcedbb9a5fa411f.1545246859.git.alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-12-26 06:40:02 +11:00
Alistair Francis 6cd2eda39f tcg/riscv: Add the mov and movi instruction
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Michael Clark <mjc@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <bd6a45c73a67b77ddaa2fe590a6bb8ee422b9683.1545246859.git.alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-12-26 06:40:02 +11:00
Alistair Francis dfa8e74f94 tcg/riscv: Add the relocation functions
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Michael Clark <mjc@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <6ac4f4b0d5ea93cb0ee9a3b8b47ee9f7b3711494.1545246859.git.alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-12-26 06:40:02 +11:00
Alistair Francis bedf14e335 tcg/riscv: Add the instruction emitters
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Michael Clark <mjc@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <c740aca183675625bb9cf3ce7b9e8b9d431ca694.1545246859.git.alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-12-26 06:40:02 +11:00
Alistair Francis 54a9ce0f68 tcg/riscv: Add the immediate encoders
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Michael Clark <mjc@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <d54dc56303fd1b0d7ed53869de2dbb59b111c7ca.1545246859.git.alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-12-26 06:40:02 +11:00
Alistair Francis 8ce23a1312 tcg/riscv: Add support for the constraints
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Michael Clark <mjc@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <dba7315e4e20e879933f72d47ccf98f1cc612b8a.1545246859.git.alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-12-26 06:40:02 +11:00
Alistair Francis 505e75c592 tcg/riscv: Add the tcg target registers
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Michael Clark <mjc@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <6e43abaa64361d57b9bc9439820d0e7701f2d47e.1545246859.git.alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-12-26 06:40:02 +11:00
Alistair Francis fb1f70f368 tcg/riscv: Add the tcg-target.h file
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Michael Clark <mjc@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <a135ee1a88cd7bd08993a519d4d654da27785254.1545246859.git.alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-12-26 06:40:02 +11:00
Emilio G. Cota ac1043f6d6 tcg: Drop nargs from tcg_op_insert_{before,after}
It's unused since 75e8b9b7aa.

Signed-off-by: Emilio G. Cota <cota@braap.org>
Message-Id: <20181209193749.12277-9-cota@braap.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-12-17 06:04:44 +03:00
Alistair Francis 161dec9d1b tcg/mips: Improve the add2/sub2 command to use TCG_TARGET_REG_BITS
Instead of hard coding 31 for the shift right use TCG_TARGET_REG_BITS - 1.

Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <7dfbddf7014a595150aa79011ddb342c3cc17ec3.1544648105.git.alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-12-17 06:04:44 +03:00
Richard Henderson e1dcf3529d tcg: Add TCG_TARGET_HAS_MEMORY_BSWAP
For now, defined universally as true, since we previously required
backends to implement swapped memory operations.  Future patches
may now remove that support where it is onerous.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-12-17 06:04:44 +03:00
Richard Henderson 6498594c8e tcg/optimize: Optimize bswap
Somehow we forgot these operations, once upon a time.
This will allow immediate stores to have their bswap
optimized away.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-12-17 06:04:44 +03:00
Richard Henderson 9e821eab0a tcg: Clean up generic bswap64
Based on the only current user, Sparc:

New code uses 2 constants that take 2 insns to load from constant pool,
plus 13.  Old code used 6 constants that took 1 or 2 insns to create,
plus 21.  The result is a new total of 17 vs an old total of 29.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-12-17 06:04:44 +03:00
Richard Henderson a686dc71d8 tcg: Clean up generic bswap32
Based on the only current user, Sparc:

New code uses 1 constant that takes 2 insns to create, plus 8.
Old code used 2 constants that took 2 insns to create, plus 9.
The result is a new total of 10 vs an old total of 13.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-12-17 06:04:44 +03:00
Richard Henderson 5785c17f31 tcg/i386: Add setup_guest_base_seg for FreeBSD
Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-12-17 06:04:44 +03:00
Richard Henderson 913c2bddc2 tcg/i386: Precompute all guest_base parameters
These values are constant between all qemu_ld/st invocations;
there is no need to figure this out each time.  If we cannot
use a segment or an offset directly for guest_base, load the
value into a register in the prologue.

Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-12-17 06:04:44 +03:00
Richard Henderson 4810d96f03 tcg/i386: Assume 32-bit values are zero-extended
We now have an invariant that all TCG_TYPE_I32 values are
zero-extended, which means that we do not need to extend
them again during qemu_ld/st, either explicitly via a separate
tcg_out_ext32u or implicitly via P_ADDR32.

Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-12-17 06:04:44 +03:00
Richard Henderson 75478279a0 tcg/i386: Implement INDEX_op_extr{lh}_i64_i32 for 32-bit guests
This preserves the invariant that all TCG_TYPE_I32 values are
zero-extended in the 64-bit host register.

Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-12-17 06:04:44 +03:00
Richard Henderson 3dbc8c61de tcg/i386: Propagate is64 to tcg_out_qemu_ld_slow_path
This helps preserve the invariant that all TCG_TYPE_I32 values
are stored zero-extended in the 64-bit host registers.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-12-17 06:04:44 +03:00
Richard Henderson 1d21d95b61 tcg/i386: Propagate is64 to tcg_out_qemu_ld_direct
This helps preserve the invariant that all TCG_TYPE_I32 values
are stored zero-extended in the 64-bit host registers.

Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-12-17 06:04:43 +03:00
Richard Henderson 55dfd8fedc tcg/s390x: Return false on failure from patch_reloc
This does require an extra two checks within the slow paths
to replace the assert that we're moving.  Also add two checks
within existing functions that lacked any kind of assert for
out of range branch.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-12-17 06:04:43 +03:00
Richard Henderson d513290351 tcg/ppc: Return false on failure from patch_reloc
The reloc_pc{14,24}_val routines retain their asserts.
Use these directly within the slow paths.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-12-17 06:04:43 +03:00
Richard Henderson 43fabd30e2 tcg/arm: Return false on failure from patch_reloc
This does require an extra two checks within the slow paths
to replace the assert that we're moving.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-12-17 06:04:43 +03:00