The first bitfield here is supposed to be used as a 64-bit equivalent
to the "uint64_t msi_addr" in the union. To make this work correctly
on big endian hosts, too, the __addr_hi field has to be part of the
bitfield, and the the bitfield members must be declared with "uint64_t"
instead of "uint32_t" - otherwise the values are placed in the wrong
bytes on big endian hosts.
Same applies to the 32-bit "msi_data" field: __resved1 must be part
of the bitfield, and the members must be declared with "uint32_t"
instead of "uint16_t".
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230802135723.178083-7-thuth@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
The code already tries to do some endianness handling here, but
currently fails badly:
- While it already swaps the data when logging errors / tracing, it fails
to byteswap the value before e.g. accessing entry->irte.present
- entry->irte.source_id is swapped with le32_to_cpu(), though this is
a 16-bit value
- The whole union is apparently supposed to be swapped via the 64-bit
data[2] array, but the struct is a mixture between 32 bit values
(the first 8 bytes) and 64 bit values (the second 8 bytes), so this
cannot work as expected.
Fix it by converting the struct to two proper 64-bit bitfields, and
by swapping the values only once for everybody right after reading
the data from memory.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230802135723.178083-3-thuth@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
The QEMU CI fails in virtio-scmi test occasionally. As reported by
Thomas Huth, this happens most likely when the system is loaded and it
fails with the following error:
qemu-system-aarch64: ../../devel/qemu/hw/pci/msix.c:659:
msix_unset_vector_notifiers: Assertion `dev->msix_vector_use_notifier && dev->msix_vector_release_notifier' failed.
../../devel/qemu/tests/qtest/libqtest.c:200: kill_qemu() detected QEMU death from signal 6 (Aborted) (core dumped)
As discovered by Fabiano Rosas, the cause is a duplicate invocation of
msix_unset_vector_notifiers via duplicate vu_scmi_stop calls:
msix_unset_vector_notifiers
virtio_pci_set_guest_notifiers
vu_scmi_stop
vu_scmi_disconnect
...
qemu_chr_write_buffer
msix_unset_vector_notifiers
virtio_pci_set_guest_notifiers
vu_scmi_stop
vu_scmi_set_status
...
qemu_cleanup
While vu_scmi_stop calls are protected by vhost_dev_is_started()
check, it's apparently not enough. vhost-user-blk and vhost-user-gpio
use an extra protection, see f5b22d06fb (vhost: recheck dev state in
the vhost_migration_log routine) for the motivation. Let's use the
same in vhost-user-scmi, which fixes the failure above.
Fixes: a5dab090e1 ("hw/virtio: Add boilerplate for vhost-user-scmi device")
Signed-off-by: Milan Zamazal <mzamazal@redhat.com>
Message-Id: <20230720101037.2161450-1-mzamazal@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230730180329.851576-1-sw@weilnetz.de>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The TLS handshake make take some time to complete, during which time an
I/O watch might be registered with the main loop. If the owner of the
I/O channel invokes qio_channel_close() while the handshake is waiting
to continue the I/O watch must be removed. Failing to remove it will
later trigger the completion callback which the owner is not expecting
to receive. In the case of the VNC server, this results in a SEGV as
vnc_disconnect_start() tries to shutdown a client connection that is
already gone / NULL.
CVE-2023-3354
Reported-by: jiangyegen <jiangyegen@huawei.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Coverity points out (CID 1513106, 1513107) that MemoryListener is a
192 byte struct which we are passing around by value. Switch to
passing a const pointer into xen_register_ioreq() and then to
xen_do_ioreq_register(). We can also make the file-scope
MemoryListener variables const, since nothing changes them.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230718101057.1110979-1-peter.maydell@linaro.org>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Extend query-migrate to provide throttle time and estimated
ring full time with dirty-limit capability enabled, through which
we can observe if dirty limit take effect during live migration.
Signed-off-by: Hyman Huang(黄勇) <yong.huang@smartx.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-ID: <168733225273.5845.15871826788879741674-8@git.sr.ht>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Deciphering the hard-coded list of integer return values from
nbd_start_negotiate() will only get more confusing when adding support
for 64-bit extended headers. Better is to name things in an enum.
Although the function in question is private to client.c, putting the
enum in a public header and including an enum-to-string conversion
will allow its use in more places in upcoming patches.
The enum is intentionally laid out so that operators like <= can be
used to group multiple modes with similar characteristics, and where
the least powerful mode has value 0, even though this patch does not
exploit that. No semantic change intended.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-ID: <20230608135653.2918540-9-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Externally, libnbd exposed the 64-bit opaque marker for each client
NBD packet as the "cookie", because it was less confusing when
contrasted with 'struct nbd_handle *' holding all libnbd state. It
also avoids confusion between the noun 'handle' as a way to identify a
packet and the verb 'handle' for reacting to things like signals.
Upstream NBD changed their spec to favor the name "cookie" based on
libnbd's recommendations[1], so we can do likewise.
[1] https://github.com/NetworkBlockDevice/nbd/commit/ca4392eb2b
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-ID: <20230608135653.2918540-6-eblake@redhat.com>
[eblake: typo fix]
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Upstream NBD now documents[1] an extension that supports 64-bit effect
lengths in requests. As part of that extension, the size of the reply
headers will change in order to permit a 64-bit length in the reply
for symmetry[2]. Additionally, where the reply header is currently 16
bytes for simple reply, and 20 bytes for structured reply; with the
extension enabled, there will only be one extended reply header, of 32
bytes, with both structured and extended modes sending identical
payloads for chunked replies.
Since we are already wired up to use iovecs, it is easiest to allow
for this change in header size by splitting each structured reply
across multiple iovecs, one for the header (which will become wider in
a future patch according to client negotiation), and the other(s) for
the chunk payload, and removing the header from the payload struct
definitions. Rename the affected functions with s/structured/chunk/
to make it obvious that the code will be reused in extended mode.
Interestingly, the client side code never utilized the packed types,
so only the server code needs to be updated.
[1] https://github.com/NetworkBlockDevice/nbd/blob/extension-ext-header/doc/proto.md
as of NBD commit e6f3b94a934
[2] Note that on the surface, this is because some future server might
permit a 4G+ NBD_CMD_READ and need to reply with that much data in one
transaction. But even though the extended reply length is widened to
64 bits, for now the NBD spec is clear that servers will not reply
with more than a maximum payload bounded by the 32-bit
NBD_INFO_BLOCK_SIZE field; allowing a client and server to mutually
agree to transactions larger than 4G would require yet another
extension.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-ID: <20230608135653.2918540-4-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
We had a mix of struct declarations followed by typedefs, and direct
struct definitions as part of a typedef. Pick a single style. Also
float forward declarations of opaque types to the top of the file,
rather than interspersed with function declarations, which will help a
future patch that wants to expose yet another opaque type that will be
referenced in NBDRequest. No semantic impact.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-ID: <20230608135653.2918540-3-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
[eblake: alter patch per mailing list feedback]
Signed-off-by: Eric Blake <eblake@redhat.com>
elf_hwcap_str() takes a bit number, but compares it for equality with
the HWCAP_S390_* masks. This causes /proc/cpuinfo to display incorrect
hwcaps.
Fix by introducing the HWCAP_S390_NR_* constants and using them in
elf_hwcap_str() instead of the HWCAP_S390_*. While at it, add the
missing nnpa, pcimio and sie hwcaps from the latest kernel.
Output before:
features : esan3 zarch stfle msa
Output after:
features : esan3 zarch stfle msa ldisp eimm etf3eh highgprs vx vxe
Fixes: e19807bee3 ("linux-user/elfload: Introduce elf_hwcap_str() on s390x")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20230627151356.273259-1-iii@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Replace 'width' and 'height' in QemuDmaBuf with 'backing_widht'
and 'backing_height' as these commonly indicate the size of the
whole surface (e.g. guest's Xorg extended display). Then use
'width' and 'height' for sub region in there (e.g. guest's
scanouts).
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Marc-André Lureau <marcandre.lureau@redhat.com>
Cc: Vivek Kasireddy <vivek.kasireddy@intel.com>
Signed-off-by: Dongwon Kim <dongwon.kim@intel.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-ID: <20230713040444.32267-1-dongwon.kim@intel.com>
We adjust CONFIG_ATOMIC128 and CONFIG_CMPXCHG128 with
CONFIG_ATOMIC128_OPT in atomic128.h. It is difficult
to tell when those changes have been applied with the
ifdef we must use with CONFIG_CMPXCHG128. So instead
use HAVE_CMPXCHG128, which triggers -Werror-undef when
the proper header has not been included.
Improves tcg_gen_atomic_cmpxchg_i128 for s390x host, which
requires CONFIG_ATOMIC128_OPT. Without this we fall back
to EXCP_ATOMIC to single-step 128-bit atomics, which is
slow enough to cause some tests to time out.
Reported-by: Thomas Huth <thuth@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Replace the 0/-1 result with true/false.
Invert the sense of the test of all callers.
Document the function.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230707204054.8792-25-richard.henderson@linaro.org>
Use the interval tree to locate an unused range in the VM.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230707204054.8792-17-richard.henderson@linaro.org>
Examine the interval tree to validate that a region
has no existing mappings.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230707204054.8792-10-richard.henderson@linaro.org>
Commit 1880ad4f4e ("virtio-scsi: Batched prepare for cmd reqs") split
calls to scsi_req_new() and scsi_req_enqueue() in the virtio-scsi device.
No ill effects were observed until commit 8cc5583abe ("virtio-scsi: Send
"REPORTED LUNS CHANGED" sense data upon disk hotplug events") added a
unit attention that was easy to trigger with device hotplug and
hot-unplug.
Because the two calls were separated, all requests in the batch were
prepared calling scsi_req_new() to report a sense. The first one
submitted would report the right sense and reset it to NO_SENSE, while
the others reported CHECK_CONDITION with no sense data. This caused
SCSI errors in Linux.
To solve this issue, let's fetch the unit attention as early as possible
when we prepare the request, so that only the first request in the batch
will use the unit attention SCSIReqOps and the others will not report
CHECK CONDITION.
Fixes: 1880ad4f4e ("virtio-scsi: Batched prepare for cmd reqs")
Fixes: 8cc5583abe ("virtio-scsi: Send "REPORTED LUNS CHANGED" sense data upon disk hotplug events")
Reported-by: Thomas Huth <thuth@redhat.com>
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=2176702
Co-developed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-ID: <20230712134352.118655-2-sgarzare@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In many cases, blindly unplugging a virtio-mem device is problematic. We
can only safely remove a device once:
* The guest is not expecting to be able to read unplugged memory
(unplugged-inaccessible == on)
* The virtio-mem device does not have memory plugged (size == 0)
* The virtio-mem device does not have outstanding requests to the VM to
plug memory (requested-size == 0)
So let's add a callback to the virtio-mem device class to check for that.
We'll wire-up virtio-mem-pci next.
Message-ID: <20230711153445.514112-7-david@redhat.com>
Tested-by: Mario Casquero <mcasquer@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Let's support unplug requests for virtio-md-pci devices that provide
a unplug_request_check() callback.
We'll wire that up for virtio-mem-pci next.
Message-ID: <20230711153445.514112-6-david@redhat.com>
Tested-by: Mario Casquero <mcasquer@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Let's factor out (un)plug handling, to be reused from arm/virt code.
Provide stubs for the case that CONFIG_VIRTIO_MD is not selected because
neither virtio-mem nor virtio-pmem is enabled. While this cannot
currently happen for x86, it will be possible for arm/virt.
Message-ID: <20230711153445.514112-3-david@redhat.com>
Tested-by: Mario Casquero <mcasquer@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Let's add a new abstract "virtio memory device" type, and use it as
parent class of virtio-mem-pci and virtio-pmem-pci.
Message-ID: <20230711153445.514112-2-david@redhat.com>
Tested-by: Mario Casquero <mcasquer@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
virtio-mem wants to know whether it should not mess with the RAMBlock
content (e.g., discard RAM, preallocate memory) on incoming migration.
So let's expose that function as migrate_ram_is_ignored() in
migration/misc.h
Message-ID: <20230706075612.67404-4-david@redhat.com>
Acked-by: Peter Xu <peterx@redhat.com>
Tested-by: Mario Casquero <mcasquer@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Let's avoid iterating over all devices and simply track it in the
DeviceMemoryState.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20230623124553.400585-11-david@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
There are no remaining users in the tree. Libvirt never used that
property and a quick internet search revealed no other users.
Further, we renamed that property already in commit f2ffbe2b7d
("pc: rename "hotplug memory" terminology to "device memory"") without
anybody complaining.
So let's just get rid of it.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <richard.henderson@linaro.org>
Cc: Eduardo Habkost <eduardo@habkost.net>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20230623124553.400585-9-david@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Let's intrduce a new helper that we will use to replace existing memory
device setup code during machine initialization. We'll enforce that the
size has to be > 0.
Once all machines were converted, we'll only allocate ms->device_memory
if the size > 0.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20230623124553.400585-3-david@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
vhost-user-gpu: edid
vhost-user-scmi device
vhost-vdpa: _F_CTRL_RX and _F_CTRL_RX_EXTRA support for svq
cleanups, fixes all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmSsjYMPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRp2vYH/20u6TAMssE/UAJoUU0ypbJkbHjDqiqDeuZN
qDYazLUWIJTUbDnSfXAiRcdJuukEpEFcoHa9O6vgFE/SNod51IrvsJR9CbZxNmk6
D+Px9dkMckDE/yb8f6hhcHsi7/1v04I0oSXmJTVYxWSKQhD4Km6x8Larqsh0u4yd
n6laZ+VK5H8sk6QvI5vMz+lYavACQVryiWV/GAigP21B0eQK79I5/N6y0q8/axD5
cpeTzUF+m33SfLfyd7PPmibCQFYrHDwosynSnr3qnKusPRJt2FzWkzOiZgbtgE2L
UQ/S4sYTBy8dZJMc0wTywbs1bSwzNrkQ+uS0v74z9wCUYTgvQTA=
=RsOh
-----END PGP SIGNATURE-----
Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging
pc,pci,virtio: cleanups, fixes, features
vhost-user-gpu: edid
vhost-user-scmi device
vhost-vdpa: _F_CTRL_RX and _F_CTRL_RX_EXTRA support for svq
cleanups, fixes all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmSsjYMPHG1zdEByZWRo
# YXQuY29tAAoJECgfDbjSjVRp2vYH/20u6TAMssE/UAJoUU0ypbJkbHjDqiqDeuZN
# qDYazLUWIJTUbDnSfXAiRcdJuukEpEFcoHa9O6vgFE/SNod51IrvsJR9CbZxNmk6
# D+Px9dkMckDE/yb8f6hhcHsi7/1v04I0oSXmJTVYxWSKQhD4Km6x8Larqsh0u4yd
# n6laZ+VK5H8sk6QvI5vMz+lYavACQVryiWV/GAigP21B0eQK79I5/N6y0q8/axD5
# cpeTzUF+m33SfLfyd7PPmibCQFYrHDwosynSnr3qnKusPRJt2FzWkzOiZgbtgE2L
# UQ/S4sYTBy8dZJMc0wTywbs1bSwzNrkQ+uS0v74z9wCUYTgvQTA=
# =RsOh
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 11 Jul 2023 12:00:19 AM BST
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [undefined]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (66 commits)
vdpa: Allow VIRTIO_NET_F_CTRL_RX_EXTRA in SVQ
vdpa: Restore packet receive filtering state relative with _F_CTRL_RX_EXTRA feature
vdpa: Allow VIRTIO_NET_F_CTRL_RX in SVQ
vdpa: Avoid forwarding large CVQ command failures
vdpa: Accessing CVQ header through its structure
vhost: Fix false positive out-of-bounds
vdpa: Restore packet receive filtering state relative with _F_CTRL_RX feature
vdpa: Restore MAC address filtering state
vdpa: Use iovec for vhost_vdpa_net_load_cmd()
pcie: Specify 0 for ARI next function numbers
pcie: Use common ARI next function number
include/hw/virtio: document some more usage of notifiers
include/hw/virtio: add kerneldoc for virtio_init
include/hw/virtio: document virtio_notify_config
hw/virtio: fix typo in VIRTIO_CONFIG_IRQ_IDX comments
include/hw: document the device_class_set_parent_* fns
include: attempt to document device_class_set_props
vdpa: Fix possible use-after-free for VirtQueueElement
pcie: Add hotplug detect state register to cmask
virtio-iommu: Rework the traces in virtio_iommu_set_page_size_mask()
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The current implementers of ARI are all SR-IOV devices. The ARI next
function number field is undefined for VF according to PCI Express Base
Specification Revision 5.0 Version 1.0 section 9.3.7.7. The PF still
requires some defined value so end the linked list formed with the field
by specifying 0 as required for any ARI implementation according to
section 7.8.7.2.
For migration, the field will keep having 1 as its value on the old
QEMU machine versions.
Fixes: 2503461691 ("pcie: Add some SR/IOV API documentation in docs/pcie_sriov.txt")
Fixes: 44c2c09488 ("hw/nvme: Add support for SR-IOV")
Fixes: 3a977deebe ("Intrdocue igb device emulation")
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Ani Sinha <anisinha@redhat.com>
Message-Id: <20230710153838.33917-3-akihiko.odaki@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Currently the only implementers of ARI is SR-IOV devices, and they
behave similar. Share the ARI next function number.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Ani Sinha <anisinha@redhat.com>
Message-Id: <20230710153838.33917-2-akihiko.odaki@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Lets document some more of the core VirtIODevice structure.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230710153522.3469097-7-alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230710153522.3469097-6-alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230710153522.3469097-5-alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
These are useful functions for when you want proper inheritance of
functionality across realize/unrealize calls.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230710153522.3469097-3-alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
I'm still not sure how I achieve by use case of the parent class
defining the following properties:
static Property vud_properties[] = {
DEFINE_PROP_CHR("chardev", VHostUserDevice, chardev),
DEFINE_PROP_UINT16("id", VHostUserDevice, id, 0),
DEFINE_PROP_UINT32("num_vqs", VHostUserDevice, num_vqs, 1),
DEFINE_PROP_END_OF_LIST(),
};
But for the specialisation of the class I want the id to default to
the actual device id, e.g.:
static Property vu_rng_properties[] = {
DEFINE_PROP_UINT16("id", VHostUserDevice, id, VIRTIO_ID_RNG),
DEFINE_PROP_UINT32("num_vqs", VHostUserDevice, num_vqs, 1),
DEFINE_PROP_END_OF_LIST(),
};
And so far the API for doing that isn't super clear.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230710153522.3469097-2-alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When running on a 64kB page size host and protecting a VFIO device
with the virtio-iommu, qemu crashes with this kind of message:
qemu-kvm: virtio-iommu page mask 0xfffffffffffff000 is incompatible
with mask 0x20010000
qemu: hardware error: vfio: DMA mapping failed, unable to continue
This is due to the fact the IOMMU MR corresponding to the VFIO device
is enabled very late on domain attach, after the machine init.
The device reports a minimal 64kB page size but it is too late to be
applied. virtio_iommu_set_page_size_mask() fails and this causes
vfio_listener_region_add() to end up with hw_error();
To work around this issue, we transiently enable the IOMMU MR on
machine init to collect the page size requirements and then restore
the bypass state.
Fixes: 90519b9053 ("virtio-iommu: Add bypass mode support to assigned device")
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20230705165118.28194-2-eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Tested-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
There is also pci_new() which creates non-multifunction PCI devices.
Accordingly the parameter is always set to true when a multi function PCI
device is to be created.
The reason for the parameter's existence seems to be that it is used in the
internal PCI code as well which is the only location where it gets set to
false. This one usage can be resolved by factoring out an internal helper
function.
Remove this redundant, error-prone parameter.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20230304114043.121024-6-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Every TYPE_PCI_IDE device performs the same not-so-trivial bit manipulation by
copy'n'paste code. Extract this into bmdma_status_writeb(), mirroring
bmdma_cmd_writeb().
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <20230531211043.41724-6-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Now that via_isa_set_irq() is unused it can be removed.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20230531211043.41724-4-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
* Use xl instead of mxl for disassemble
* Factor out extension tests to cpu_cfg.h
* disas/riscv: Add vendor extension support
* disas/riscv: Add support for XVentanaCondOps
* disas/riscv: Add support for XThead* instructions
* Fix mstatus related problems
* Fix veyron-v1 CPU properties
* Fix the xlen for data address when MPRV=1
* opensbi: Upgrade from v1.2 to v1.3
* Enable 32-bit Spike OpenSBI boot testing
* Support the watchdog timer of HiFive 1 rev b
* Only build qemu-system-riscv$$ on rv$$ host
* Add RVV registers to log
* Restrict ACLINT to TCG
* Add syscall riscv_hwprobe
* Add support for BF16 extensions
* KVM_RISCV_SET_TIMER macro is not configured correctly
* Generate devicetree only after machine initialization is complete
* virt: Convert fdt_load_addr to uint64_t
* KVM: fixes and enhancements
* Add support for the Zfa extension
-----BEGIN PGP SIGNATURE-----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=3XFD
-----END PGP SIGNATURE-----
Merge tag 'pull-riscv-to-apply-20230710-1' of https://github.com/alistair23/qemu into staging
Third RISC-V PR for 8.1
* Use xl instead of mxl for disassemble
* Factor out extension tests to cpu_cfg.h
* disas/riscv: Add vendor extension support
* disas/riscv: Add support for XVentanaCondOps
* disas/riscv: Add support for XThead* instructions
* Fix mstatus related problems
* Fix veyron-v1 CPU properties
* Fix the xlen for data address when MPRV=1
* opensbi: Upgrade from v1.2 to v1.3
* Enable 32-bit Spike OpenSBI boot testing
* Support the watchdog timer of HiFive 1 rev b
* Only build qemu-system-riscv$$ on rv$$ host
* Add RVV registers to log
* Restrict ACLINT to TCG
* Add syscall riscv_hwprobe
* Add support for BF16 extensions
* KVM_RISCV_SET_TIMER macro is not configured correctly
* Generate devicetree only after machine initialization is complete
* virt: Convert fdt_load_addr to uint64_t
* KVM: fixes and enhancements
* Add support for the Zfa extension
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEaukCtqfKh31tZZKWr3yVEwxTgBMFAmSr+ekACgkQr3yVEwxT
# gBMMGg//ZCcyH3KXB49c2KUIFO6FKYUxN9uC3giZCtuGyEH8T2yDgZVVXnxwU+Ij
# +3Ej6T/ZdWMpePC9qf+xKzHWZk7Qc8Tcg+JgQbga573894yZInRwYl8HsSlEKA+Z
# vlqSBPxTlp9rlDwGP/LjGljyIFqL4konk9zi3FL4ZXTF1iHUGrh/953Y3wIreEfl
# KX5UznnWcgy2BqQT1vihMbM8qCVK6iryH+QZ6LiAsPMSX1rIzk8ectQryILzoIYh
# bMiwCLVMyr4ZrUXjmGTF+7/WcOWwhhyfpdstf2iotKALelZtVHit0wHcty2GYQde
# nvN83jJWu04DGXkPBUsqCUQXczGo1QHjJUH3RIRJzfOby/lGt4pSzHAfKA+iNUht
# ikM3SdBsXMO+ogjTtTcCMb7/m2vsMoQP60VRts9Mh3YVD0cgr7RqpqRoEMugVYnr
# ca8Vijf71mB+y+pq477eV1Q8BoKpr8xa1OlFkNKPC17uMD7HoDMI44QgFOgtYp10
# TMsqqyB75q6PZhSEwm63xbmH0Zpo8kSqT/E3MTtGTyPeuL8TNNNSkCmFaGYmRrbI
# XEp7vG2RaDJOvDomS3nUhA5ruc8SaXd0q25q2gLYQfCsehfFqZAwuNB5xf1zS0M0
# ov1/gwaqU93t6nLbo2cCbb0plkIFKwwJ9KKjD06wJ4KPe0TGFzk=
# =3XFD
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 10 Jul 2023 01:30:33 PM BST
# gpg: using RSA key 6AE902B6A7CA877D6D659296AF7C95130C538013
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6AE9 02B6 A7CA 877D 6D65 9296 AF7C 9513 0C53 8013
* tag 'pull-riscv-to-apply-20230710-1' of https://github.com/alistair23/qemu: (54 commits)
riscv: Add support for the Zfa extension
target/riscv/kvm.c: read/write (cbom|cboz)_blocksize in KVM
target/riscv/kvm.c: add kvmconfig_get_cfg_addr() helper
target/riscv: update multi-letter extension KVM properties
target/riscv/cpu.c: create KVM mock properties
target/riscv/cpu.c: remove priv_ver check from riscv_isa_string_ext()
target/riscv/cpu.c: add satp_mode properties earlier
target/riscv/kvm.c: add multi-letter extension KVM properties
target/riscv/kvm.c: update KVM MISA bits
target/riscv: add KVM specific MISA properties
target/riscv/cpu: add misa_ext_info_arr[]
target/riscv/kvm.c: init 'misa_ext_mask' with scratch CPU
target/riscv: handle mvendorid/marchid/mimpid for KVM CPUs
target/riscv: read marchid/mimpid in kvm_riscv_init_machine_ids()
target/riscv: use KVM scratch CPUs to init KVM properties
target/riscv/cpu.c: restrict 'marchid' value
target/riscv/cpu.c: restrict 'mimpid' value
target/riscv/cpu.c: restrict 'mvendorid' value
hw/riscv/virt.c: skip 'mmu-type' FDT if satp mode not set
target/riscv: skip features setup for KVM CPUs
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
There is also pci_create_simple() which creates non-multifunction PCI
devices. Accordingly the parameter is always set to true when a multi
function PCI device is to be created.
The reason for the parameter's existence seems to be that it is used in the
internal PCI code as well which is the only location where it gets set to
false. This one usage can be replaced by trivial code.
Remove this redundant, error-prone parameter.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20230304114043.121024-5-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
i440fx_init() is a legacy init function. The previous patches worked towards
TYPE_I440FX_PCI_HOST_BRIDGE to be instantiated the QOM way. Do this now by
transforming the parameters passed to i440fx_init() into property assignments.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20230630073720.21297-17-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
I440FX needs a different PCI device model if the "igd-passthru" property is
enabled. The type name is currently passed as a parameter to i440fx_init(). This
parameter will be replaced by a property assignment once i440fx_init() gets
resolved.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20230630073720.21297-16-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Thomas Huth