Add a trace event for the Identify command.
Signed-off-by: Gollu Appalanaidu <anaidu.gollu@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com>
Remove an unnecessary le_to_cpu conversion in Identify.
Signed-off-by: Gollu Appalanaidu <anaidu.gollu@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com>
ZASL (Zone Append Size Limit) is defined exactly like MDTS (Maximum Data
Transfer Size), that is, it is a value in units of the minimum memory
page size (CAP.MPSMIN) and is reported as a power of two.
The 'mdts' nvme device parameter is specified as in the spec, but the
'zoned.append_size_limit' parameter is specified in bytes. This is
suboptimal for a number of reasons:
1. It is just plain confusing wrt. the definition of mdts.
2. There is a lot of complexity involved in validating the value; it
must be a power of two, it should be larger than 4k, if it is zero
we set it internally to mdts, but still report it as zero.
3. While "hw/block/nvme: improve invalid zasl value reporting"
slightly improved the handling of the parameter, the validation is
still wrong; it does not depend on CC.MPS, it depends on
CAP.MPSMIN. And we are not even checking that it is actually less
than or equal to MDTS, which is kinda the *one* condition it must
satisfy.
Fix this by defining zasl exactly like mdts and checking the one thing
that it must satisfy (that it is less than or equal to mdts). Also,
change the default value from 128KiB to 0 (aka, whatever mdts is).
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Add support for using the broadcast nsid to issue a flush on all
namespaces through a single command.
Signed-off-by: Gollu Appalanaidu <anaidu.gollu@samsung.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Commit 6eb7a07129 ("hw/block/nvme: change controller pci id") changed
the controller to use a Red Hat assigned PCI Device and Vendor ID, but
did not change the IEEE OUI away from the Intel IEEE OUI.
Fix that and use the locally assigned QEMU IEEE OUI instead if the
`use-intel-id` parameter is not explicitly set. Also reverse the Intel
IEEE OUI bytes.
Signed-off-by: Gollu Appalanaidu <anaidu.gollu@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
The Zone Append Size Limit (ZASL) must be at least 4096 bytes, so
improve the user experience by adding an early parameter check in
nvme_check_constraints.
When ZASL is still too small due to the host configuring the device for
an even larger page size, convert the trace point in nvme_start_ctrl to
an NVME_GUEST_ERR such that this is logged by QEMU instead of only
traced.
Reported-by: Corne <info@dantalion.nl>
Cc: Dmitry Fomichev <Dmitry.Fomichev@wdc.com>
Reviewed-by: Dmitry Fomichev <dmitry.fomichev@wdc.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Firstly, if zoned.max_active is non-zero, zoned.max_open must be less
than or equal to zoned.max_active.
Secondly, if only zones.max_active is set, we have to explicitly set
zones.max_open or we end up with an invalid MAR/MOR configuration. This
is an artifact of the parameters not being zeroes-based like in the
spec.
Cc: Dmitry Fomichev <dmitry.fomichev@wdc.com>
Reported-by: Gollu Appalanaidu <anaidu.gollu@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Dmitry Fomichev <dmitry.fomichev@wdc.com>
Implicitly and Explicitly Open zones can be closed by Close Zone
management function. This got broken by a recent commit ("hw/block/nvme:
refactor zone resource management") and now such commands fail with
Invalid Zone State Transition status.
Modify nvm_zrm_close() function to make Close Zone work correctly.
Signed-off-by: Dmitry Fomichev <dmitry.fomichev@wdc.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Add support for TP 4065a ("Simple Copy Command"), v2020.05.04
("Ratified").
The implementation uses a bounce buffer to first read in the source
logical blocks, then issue a write of that bounce buffer. The default
maximum number of source logical blocks is 128, translating to 512 KiB
for 4k logical blocks which aligns with the default value of MDTS.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Add new data structures and types for the Simple Copy command.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
In preparation for Simple Copy, pull write pointer advancement into a
separate function that is independent off an NvmeRequest.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Zone transition handling and resource management is open coded (and
semi-duplicated in the case of open, close and finish).
In preparation for Simple Copy command support (which also needs to open
zones for writing), consolidate into a set of 'nvme_zrm' functions and
in the process fix a bug with the controller not closing an open zone to
allow another zone to be explicitly opened.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Remove the unused NvmeCtrl parameter in nvme_check_zone_write.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
nvme-ns device is registered to a nvme controller device during the
initialization in nvme_register_namespace() in case that 'bus' property
is given which means it's mapped to a single controller.
This patch introduced a new property 'subsys' just like the controller
device instance did to map a namespace to a NVMe subsystem.
If 'subsys' property is given to the nvme-ns device, it will belong to
the specified subsystem and will be attached to all controllers in that
subsystem by enabling shared namespace capability in NMIC(Namespace
Multi-path I/O and Namespace Capabilities) in Identify Namespace.
Usage:
-device nvme-subsys,id=subsys0
-device nvme,serial=foo,id=nvme0,subsys=subsys0
-device nvme,serial=bar,id=nvme1,subsys=subsys0
-device nvme,serial=baz,id=nvme2,subsys=subsys0
-device nvme-ns,id=ns1,drive=<drv>,nsid=1,subsys=subsys0 # Shared
-device nvme-ns,id=ns2,drive=<drv>,nsid=2,bus=nvme2 # Non-shared
In the above example, 'ns1' will be shared to 'nvme0' and 'nvme1' in
the same subsystem. On the other hand, 'ns2' will be attached to the
'nvme2' only as a private namespace in that subsystem.
All the namespace with 'subsys' parameter will attach all controllers in
the subsystem to the namespace by default.
Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com>
Tested-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Added Namespace Multi-path I/O and Namespace Sharing Capabilities (NMIC)
field to support shared namespace from controller(s).
This field is in Identify Namespace data structure in [30].
Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com>
Tested-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
We have nvme-subsys and nvme devices mapped together. To support
multi-controller scheme to this setup, controller identifier(id) has to
be managed. Earlier, cntlid(controller id) used to be always 0 because
we didn't have any subsystem scheme that controller id matters.
This patch introduced 'cntlid' attribute to the nvme controller
instance(NvmeCtrl) and make it allocated by the nvme-subsys device
mapped to the controller. If nvme-subsys is not given to the
controller, then it will always be 0 as it was.
Added 'ctrls' array in the nvme-subsys instance to manage attached
controllers to the subsystem with a limit(32). This patch didn't take
list for the controllers to make it seamless with nvme-ns device.
Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com>
Tested-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Added Controller Multi-path I/O and Namespace Sharing Capabilities
(CMIC) field to support multi-controller in the following patches.
This field is in Identify Controller data structure in [76].
Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com>
Tested-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
nvme controller(nvme) can be mapped to a NVMe subsystem(nvme-subsys).
This patch maps a controller to a subsystem by adding a parameter
'subsys' to the nvme device.
To map a controller to a subsystem, we need to put nvme-subsys first and
then maps the subsystem to the controller:
-device nvme-subsys,id=subsys0
-device nvme,serial=foo,id=nvme0,subsys=subsys0
If 'subsys' property is not given to the nvme controller, then subsystem
NQN will be created with serial (e.g., 'foo' in above example),
Otherwise, it will be based on subsys id (e.g., 'subsys0' in above
example).
Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com>
Tested-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
To support multi-path in QEMU NVMe device model, We need to have NVMe
subsystem hierarchy to map controllers and namespaces to a NVMe
subsystem.
This patch introduced a simple nvme-subsys device model. The subsystem
will be prepared with subsystem NQN with <subsys_id> provided in
nvme-subsys device:
ex) -device nvme-subsys,id=subsys0: nqn.2019-08.org.qemu:subsys0
Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com>
Tested-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
[k.jensen: added 'nqn' device parameter per request]
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
This includes both input parameters (project id and commit) in the
message so to make it easier to debug returned API calls.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20210222193240.921250-4-crosa@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
When an HTTP GET request fails, it's useful to go beyond the "not
successful" message, and show the code returned by the server.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20210222193240.921250-3-crosa@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This simply splits out the code that does an HTTP GET so that it
can be used for other API requests.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20210222193240.921250-2-crosa@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
"make check SPEED=slow" got lost in the conversion of the build
system to meson - the tests were always running in "quick" mode.
Fix it by passing the "-m" parameter to the test harness at the
right spot in scripts/mtest2make.py.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210218172313.2217440-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
There are 23 files that include the "sysemu/qtest.h",
but they do not use any qtest functions.
Signed-off-by: Chen Qun <kuhn.chenqun@huawei.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210226081414.205946-1-kuhn.chenqun@huawei.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Keep setting ret close to setting errp and don't merge different error
paths into one. This way it's more obvious that we don't return
error without setting errp.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-Id: <20210202124956.63146-15-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Always set errp on failure. The generic bdrv_open_driver supports
driver functions which can return a negative value but forget to set
errp. That's a strange thing. Let's improve bdrv_qed_do_open to not
behave this way. This allows the simplification of code in
bdrv_qed_co_invalidate_cache().
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <20210202124956.63146-14-vsementsov@virtuozzo.com>
[eblake: commit message grammar tweak]
Signed-off-by: Eric Blake <eblake@redhat.com>
qcow2_do_open correctly sets errp on each failure path. So, we can
simplify code in qcow2_co_invalidate_cache() and drop explicit error
propagation.
Add ERRP_GUARD() as mandated by the documentation in
include/qapi/error.h so that error_prepend() is actually called even if
errp is &error_fatal.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <20210202124956.63146-13-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
It's better to return status together with setting errp. It allows to
reduce error propagation.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-Id: <20210202124956.63146-12-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
It's better to return status together with setting errp. It makes
possible to avoid error propagation.
While being here, put ERRP_GUARD() to fix error_prepend(errp, ...)
usage inside qcow2_store_persistent_dirty_bitmaps() (see the comment
above ERRP_GUARD() definition in include/qapi/error.h)
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-Id: <20210202124956.63146-11-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
It's recommended for bool functions with errp to return true on success
and false on failure. Non-standard interfaces don't help to understand
the code. The change is also needed to reduce error propagation.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <20210202124956.63146-10-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Don't use error propagation in qcow2_get_specific_info(). For this
refactor qcow2_get_bitmap_info_list, its current interface is rather
weird.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210202124956.63146-9-vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
[eblake: separate local 'tail' variable from 'info_list' parameter]
Signed-off-by: Eric Blake <eblake@redhat.com>
Better to return status together with setting errp. It allows to avoid
error propagation in the caller.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-Id: <20210202124956.63146-8-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Let's check return value of mirror_start_job to check for failure
instead of local_err.
Rename ret to job, as ret is usually integer variable.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-Id: <20210202124956.63146-7-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
bdrv_set_backing_hd now returns status, let's use it.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-Id: <20210202124956.63146-6-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
We leak local_err and don't report failure to the caller. It's
definitely wrong, let's fix.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-Id: <20210202124956.63146-5-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
This patch is generated by cocci script:
@@
symbol bdrv_open_child, errp, local_err;
expression file;
@@
file = bdrv_open_child(...,
- &local_err
+ errp
);
- if (local_err)
+ if (!file)
{
...
- error_propagate(errp, local_err);
...
}
with command
spatch --sp-file x.cocci --macro-file scripts/cocci-macro-file.h \
--in-place --no-show-diff --max-width 80 --use-gitgrep block
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-Id: <20210202124956.63146-4-vsementsov@virtuozzo.com>
[eblake: fix qcow2_do_open() to use ERRP_GUARD, necessary as the only
caller to pass allow_none=true]
Signed-off-by: Eric Blake <eblake@redhat.com>
Supporting '0x20M' looks odd, particularly since we have a 'B' suffix
that is ambiguous for bytes, as well as a less-frequently-used 'E'
suffix for extremely large exibytes. In practice, people using hex
inputs are specifying values in bytes (and would have written
0x2000000, or possibly relied on default_suffix in the case of
qemu_strtosz_MiB), and the use of scaling suffixes makes the most
sense for inputs in decimal (where the user would write 32M). But
rather than outright dropping support for hex-with-suffix, let's
follow our deprecation policy. Sadly, since qemu_strtosz() does not
have an Err** parameter, and plumbing that in would be a much larger
task, we instead go with just directly emitting the deprecation
warning to stderr.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210211204438.1184395-4-eblake@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
We have multiple clients of qemu_strtosz (qemu-io, the opts visitor,
the keyval visitor), and it gets annoying that edge-case testing is
impacted by implicit rounding to 53 bits of precision due to parsing
with strtod(). As an example posted by Rich Jones:
$ nbdkit memory $(( 2**63 - 2**30 )) --run \
'build/qemu-io -f raw "$uri" -c "w -P 3 $(( 2**63 - 2**30 - 512 )) 512" '
write failed: Input/output error
because 9223372035781033472 got rounded to 0x7fffffffc0000000 which is
out of bounds.
It is also worth noting that our existing parser, by virtue of using
strtod(), accepts decimal AND hex numbers, even though test-cutils
previously lacked any coverage of the latter until the previous patch.
We do have existing clients that expect a hex parse to work (for
example, iotest 33 using qemu-io -c "write -P 0xa 0x200 0x400"), but
strtod() parses "08" as 8 rather than as an invalid octal number, so
we know there are no clients that depend on octal. Our use of
strtod() also means that "0x1.8k" would actually parse as 1536 (the
fraction is 8/16), rather than 1843 (if the fraction were 8/10); but
as this was not covered in the testsuite, I have no qualms forbidding
hex fractions as invalid, so this patch declares that the use of
fractions is only supported with decimal input, and enhances the
testsuite to document that.
Our previous use of strtod() meant that -1 parsed as a negative; now
that we parse with strtoull(), negative values can wrap around modulo
2^64, so we have to explicitly check whether the user passed in a '-';
and make it consistent to also reject '-0'. This has the minor effect
of treating negative values as EINVAL (with no change to endptr)
rather than ERANGE (with endptr advanced to what was parsed), visible
in the updated iotest output.
We also had no testsuite coverage of "1.1e0k", which happened to parse
under strtod() but is unlikely to occur in practice; as long as we are
making things more robust, it is easy enough to reject the use of
exponents in a strtod parse.
The fix is done by breaking the parse into an integer prefix (no loss
in precision), rejecting negative values (since we can no longer rely
on strtod() to do that), determining if a decimal or hexadecimal parse
was intended (with the new restriction that a fractional hex parse is
not allowed), and where appropriate, using a floating point fractional
parse (where we also scan to reject use of exponents in the fraction).
The bulk of the patch is then updates to the testsuite to match our
new precision, as well as adding new cases we reject (whether they
were rejected or inadvertently accepted before).
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210211204438.1184395-3-eblake@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Enhance our testsuite coverage of do_strtosz() to cover some things we
know that existing users want to continue working (hex bytes), as well
as some things that accidentally work but shouldn't (hex fractions) or
accidentally fail but that users want to work (64-bit precision on
byte values). This includes fixing a typo in the comment regarding
our parsing near 2^64.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210211204438.1184395-2-eblake@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
When querying image extents for raw image, qemu-nbd reports holes as
zero:
$ qemu-nbd -t -r -f raw empty-6g.raw
$ qemu-img map --output json nbd://localhost
[{ "start": 0, "length": 6442450944, "depth": 0, "zero": true, "data": true, "offset": 0}]
$ qemu-img map --output json empty-6g.raw
[{ "start": 0, "length": 6442450944, "depth": 0, "zero": true, "data": false, "offset": 0}]
Turns out that qemu-img map reports a hole based on BDRV_BLOCK_DATA, but
nbd server reports a hole based on BDRV_BLOCK_ALLOCATED.
The NBD protocol says:
NBD_STATE_HOLE (bit 0): if set, the block represents a hole (and
future writes to that area may cause fragmentation or encounter an
NBD_ENOSPC error); if clear, the block is allocated or the server
could not otherwise determine its status.
qemu-img manual says:
whether the sectors contain actual data or not (boolean field data;
if false, the sectors are either unallocated or stored as
optimized all-zero clusters);
To me, data=false looks compatible with NBD_STATE_HOLE. From user point
of view, getting same results from qemu-nbd and qemu-img is more
important than being more correct about allocation status.
Changing nbd server to report holes using BDRV_BLOCK_DATA makes qemu-nbd
results compatible with qemu-img map:
$ qemu-img map --output json nbd://localhost
[{ "start": 0, "length": 6442450944, "depth": 0, "zero": true, "data": false, "offset": 0}]
Signed-off-by: Nir Soffer <nsoffer@redhat.com>
Message-Id: <20210219160752.1826830-1-nsoffer@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210304103503.21008-1-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
ZynqMP QSPI supports SPI transfer using DMA mode, but currently this
is unimplemented. When QSPI is programmed to use DMA mode, QEMU will
crash. This is observed when testing VxWorks 7.
This adds a Xilinx CSU DMA model and the implementation is based on
https://github.com/Xilinx/qemu/blob/master/hw/dma/csu_stream_dma.c.
The DST part of the model is verified along with ZynqMP GQSPI model.
Signed-off-by: Xuzhou Cheng <xuzhou.cheng@windriver.com>
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20210303135254.3970-2-bmeng.cn@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
KVM requires the target cpu to be at least ARMv8 architecture
(support on ARMv7 has been dropped in commit 82bf7ae84ce:
"target/arm: Remove KVM support for 32-bit Arm hosts").
A KVM-only build won't be able to run TCG cpus, move the
v7A CPU definitions to cpu_tcg.c.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210306151801.2388182-1-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Test that when we change the scaling of the system counter that the
system timer responds appropriately.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Gollu Appalanaidu