This patch adds basic multiqueue support for qemu. The idea is simple, an array
of NetClientStates were introduced in NICState, parse_netdev() were extended to
find and match all NetClientStates belongs to the backend and place their
pointers in NICConf. Then qemu_new_nic can setup a N:N mapping between NICStates
that belongs to a nic and NICStates belongs to the netdev. And a queue_index
were introduced in NetClientState to track its index. After this, each peers of
a NICState were abstracted as a queue.
After this change, all NetClientState that belongs to the same backend/nic has
the same id. When use want to change the link status, all NetClientStates that
belongs to the same backend/nic will be also changed. When user want to delete
a device or netdev, all NetClientStates that belongs to the same backend/nic
will be deleted also. Changing or deleting an specific queue is not allowed.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
To support multiqueue nic, this patch separate the nic destructor from
qemu_del_net_client() to a new helper qemu_del_nic() since the mapping bettween
NiCState and NetClientState were not 1:1 in multiqueue. The following patches
would refactor this function to support multiqueue nic.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
To support multiqueue, this patch introduces a helper qemu_get_nic() to get
NICState from a NetClientState. The following patches would refactor this helper
to support multiqueue.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
To support multiqueue, the patch introduce a helper qemu_get_queue()
which is used to get the NetClientState of a device. The following patches would
refactor this helper to support multiqueue.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
DeviceState::parent_bus is document as private and should be accessed
through qdev_get_parent_bus(). Use a DEVICE() cast instead of accessing
ISADevice's qdev field directly. Use ISA_BUS() in place of DO_UPCAST().
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
It is not being used in hot paths and is obsoleted by I2C_SLAVE()
QOM cast macro. Clean it up using a scripted conversion, so that it
doesn't get used in new code.
Some of its callers were combining it with FROM_I2C_SLAVE() macro, which
is equally obsolete but needs to be replaced in a type-specific way.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Cc: Kuo-Jung Su <dantesu@faraday-tech.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This reverts commit 84dd212024.
I'm not sure what issue the original commit was meant to fix, or if
the logic is actually wrong, but it causes e1000 to stop working
after a guest issues a reset.
>From what I can tell a guest with an e1000 nic has no way of changing
the link status, as far as it's NetClient peer is concerned, except
in the auto-negotiation path, so with this patch in place there's no
recovery after a reset, since the link goes down and stays that way.
Revert this patch now to fix the bigger problem, and handle any
lingering issues with a follow-up.
Reproduced/tested with qemu-jeos and Ubuntu 12.10.
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
# By Andreas Färber
# Via Alexander Graf
* agraf/s390-for-upstream:
target-s390x: Pass S390CPU to s390_{add, del}_running_cpu()
target-s390x: Clean up cpu_inject_*() signatures
target-s390x: Fix debug output
target-s390x: Fix debug output (continued)
# By Andreas Färber
# Via Andreas Färber
* afaerber/qom-cpu:
linux-user: bsd-user: Don't reset X86CPU twice
target-i386: Pass X86CPU to cpu_x86_set_a20()
target-unicore32: Rename CPU subtypes
target-openrisc: Rename CPU subtypes
target-openrisc: TYPE_OPENRISC_CPU should be abstract
target-m68k: Rename CPU subtypes
target-m68k: Mark as unmigratable
target-s390x: Mark as unmigratable
target-sh4: Mark as unmigratable
target-xtensa: Mark as unmigratable
target-microblaze: Mark as unmigratable
target-unicore32: Mark as unmigratable
ide/mmio: QOM'ify MMIO IDE for R2D
This includes my timestamp generation cleanup,
Amos's and my work on virtio net commands,
pci,e1000,vfio and piix fixes.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.13 (GNU/Linux)
iQEcBAABAgAGBQJRCmGLAAoJECgfDbjSjVRp6PUH/1YsrRgrPUEhrhHwM4OPAMB5
D/kcTwrS4R7XNk6HRElfVnPbDYl2iIqi7a6RrY/x2jQvMBaghT5v6w07kg9gCooF
qNpHUr0y2YHy9yIFpG36SntqDmXXqvd4ngAMn7EviDH6OvwI8dSqbIVRUFc8yw5c
g+EyEQpyZieBVEGnWPEl6qDo4KFw9nU3p0A93fsQnKikXet00d+V01hQ4TALbBxk
EkeM1tYTjVlHOZAPsq6I2/CvRCO7YbIaboJJ9ZQ83GCX7TEsYELaMOc1qxVOAv0k
rKVijwqyHvhncxumPM/NIUuSnQTQxxeJmV4mWLARPGSh7FYorqMesnY4p1aX4RQ=
=k7PQ
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'mst/tags/for_anthony' into staging
virtio,make,pci,e1000,vfio,piix
This includes my timestamp generation cleanup,
Amos's and my work on virtio net commands,
pci,e1000,vfio and piix fixes.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Thu 31 Jan 2013 06:20:27 AM CST using RSA key ID D28D5469
# gpg: Can't check signature: public key not found
# By Michael S. Tsirkin (6) and others
# Via Michael S. Tsirkin
* mst/tags/for_anthony:
vfio-pci: Enable PCIe extended config space
PIIX3: reset the VM when the Reset Control Register's RCPU bit gets set
ich9: add support for pci assignment
virtio-net: rename ctrl rx commands
virtio-net: introduce a new macaddr control
virtio-net: remove layout assumptions for ctrl vq
virtio-net: revert mac on reset
rules/mak: make clean should blow away timestamp files
Makefile: clean timestamp generation rule
rules.mak: cleanup config generation rules
e1000: document ICS read behaviour
This prepares for moving the halted field to CPUState.
Most call sites can already supply S390CPU, for some env becomes unused.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Despite cautioning that S390CPU is needed for upcoming CPUState
refactorings, commit 5d69c547d9 (s390:
I/O interrupt and machine check injection.) added functions
cpu_inject_io() and cpu_inject_crw_mchk() with CPUS390XState argument,
claiming consistency with cpu_inject_ext().
This complicates making cpu_interrupt() take a CPUState even more and it
required to pass &cpu->env from some S390CPU-aware call sites already,
creating inconsistency elsewhere. Address that.
This also eliminates the need for CPUS390XState in s390_virtio_irq().
Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Prepares for cpu_interrupt() changing argument to CPUState.
While touching it, rename to x86_cpu_...() now that it takes an X86CPU.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
It was not qdev'ified before, so turn it into a SysBusDevice.
Keep mmio_ide_init_drives() around to attach the hard drive.
Signed-off-by: Andreas Färberr <afaerber@suse.de>
Cc: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
# By Christoffer Dall (1) and Peter Maydell (1)
# Via Peter Maydell
* pmaydell/arm-devs.next:
hw/vexpress: Use correct HBI (board model number) for vexpress-a15
hw/arm_sysctl: Clear sysctl cfgctrl start bit
# By Markus Armbruster (12) and others
# Via Stefan Hajnoczi
* stefanha/trivial-patches:
qmp-commands.hx: s/tray-open/tray_open/ to match qapi schema
tests: Fix {rtc, m48t59}-test build on illumos
qemu-pixman.h: Avoid mutual inclusion loop with console.h
qemu-ga: Fix unchecked strdup() by converting to g_strdup()
qapi: Fix unchecked strdup() by converting to g_strdup()
libcacard: Fix unchecked strdup() by converting to g_strdup()
qemu-log: Plug trivial memory leak in cpu_set_log_filename()
qemu-log: Fix unchecked strdup() by converting to g_strdup()
virtfs-proxy-helper: Fix unchecked strdup() by conv. to g_strdup()
spice: Fix unchecked strdup() by converting to g_strdup()
readline: Fix unchecked strdup() by converting to g_strdup()
hw/9pfs: Fix unchecked strdup() by converting to g_strdup()
g_strdup(NULL) returns NULL; simplify
g_malloc(0) and g_malloc0(0) return NULL; simplify
xilinx_axidma: Fix debug mode compile messages
cadence_gem: Debug mode compile fixes
cadence_ttc: Debug mode compile fixes
vnc: Clean up vncws_send_handshake_response()
# By Andreas Färber
# Via Andreas Färber
* afaerber-or/prep-up:
prep: Move PReP machine to hw/ppc/
prep_pci: Convert to QOM realizefn
prep_pci: Create PCIBus and PCIDevice in-place
The vexpress-a15 QEMU model is supposed to be a V2P-CA15; the HBI
(a kind of board model number) for this coretile is 237, not 217.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The start bit should only be set to indicate that a function call is
underway, right now. When done with function, clear it.
Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Note: the allocation in virtio_9p_init() is still leaked. To be fixed
in a followup commit.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Once upon a time, it was decided that qemu_malloc(0) should abort.
Switching to glib retired that bright idea. Some code that was added
to cope with it (e.g. in commits 702ef63, b76b6e9) is still around.
Bury it.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Missing cast one one of the conditionally compiled printfs.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Some printfs are throwing warnings when debug mode is enabled. Fixed.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Some printfs are throwing warnings when debug mode is enabled. Fixed.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
We don't know pre-init time whether the device we're exposing is PCIe
or legacy PCI. We could ask for it to be specified via a device
option, but that seems like too much to ask of the user. Instead we
can assume everything will be PCIe, which makes PCI-core allocate
enough config space. Removing the flag during init leaves the space
allocated, but allows legacy PCI devices to report the real device
config space size to rest of Qemu.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Traditional PCI config space access is achieved by writing a 32 bit
value to io port 0xcf8 to identify the bus, device, function and config
register. Port 0xcfc then contains the register in question. But if you
write the appropriate pair of magic values to 0xcf9, the machine will
reboot. Spectacular! And not standardised in any way (certainly not part
of the PCI spec), so different chipsets may have different requirements.
Booo.
In the PIIX3 spec, IO port 0xcf9 is specified as the Reset Control
Register. Bit 1 (System Reset, SRST) would normally differentiate between
soft reset and hard reset, but we ignore the difference beyond allowing
the guest to read it back.
RHBZ reference: 890459
This patch introduces the following overlap between the preexistent
"pci-conf-idx" region and the "piix3-reset-control" region just being
added. Partial output from "info mtree":
I/O
0000000000000000-000000000000ffff (prio 0, RW): io
0000000000000cf8-0000000000000cfb (prio 0, RW): pci-conf-idx
0000000000000cf9-0000000000000cf9 (prio 1, RW): piix3-reset-control
I sanity-checked the patch by booting a RHEL-6.3 guest and found no
problems. I summoned gdb and set a breakpoint on rcr_write() in order to
gather a bit more confidence. Relevant frames of the stack:
kvm_handle_io (port=3321, data=0x7f3f5f3de000, direction=1, size=1,
count=1) [kvm-all.c:1422]
cpu_outb (addr=3321, val=6 '\006') [ioport.c:289]
ioport_write (index=0, address=3321, data=6) [ioport.c:83]
ioport_writeb_thunk (opaque=0x7f3f622c4680, addr=3321, data=6)
[ioport.c:212]
memory_region_iorange_write (iorange=0x7f3f622c4680, offset=0,
width=1, data=6) [memory.c:439]
access_with_adjusted_size (addr=0, value=0x7f3f531fbac0,
size=1, access_size_min=1,
access_size_max=4,
access=0x7f3f5f6e0f90
<memory_region_write_accessor>,
opaque=0x7f3f6227b668)
[memory.c:364]
memory_region_write_accessor (opaque=0x7f3f6227b668, addr=0,
value=0x7f3f531fbac0, size=1,
shift=0, mask=255)
[memory.c:334]
rcr_write (opaque=0x7f3f6227afb0, addr=0, val=6, len=1)
[hw/piix_pci.c:498]
The dispatch happens in ioport_write(); "index=0" means byte-wide access:
static void ioport_write(int index, uint32_t address, uint32_t data)
{
static IOPortWriteFunc * const default_func[3] = {
default_ioport_writeb,
default_ioport_writew,
default_ioport_writel
};
IOPortWriteFunc *func = ioport_write_table[index][address];
if (!func)
func = default_func[index];
func(ioport_opaque[address], address, data);
}
The "ioport_write_table" and "ioport_opaque" arrays describe the flattened
IO port space. The first array is less interesting (it selects a thunk
function). The "ioport_opaque" array is interesting because it decides how
writing to the port is implemented ultimately.
4-byte wide access to 0xcf8 (pci-conf-idx):
(gdb) print ioport_write_table[2][0xcf8]
$1 = (IOPortWriteFunc *) 0x7f3f5f6d99ba <ioport_writel_thunk>
(gdb) print \
((struct MemoryRegionIORange*)ioport_opaque[0xcf8])->mr->ops.write
$2 = (void (*)(void *, hwaddr, uint64_t, unsigned int))
0x7f3f5f5575cb <pci_host_config_write>
1-byte wide access to 0xcf9 (piix3-reset-control):
(gdb) print ioport_write_table[0][0xcf9]
$3 = (IOPortWriteFunc *) 0x7f3f5f6d98d0 <ioport_writeb_thunk>
(gdb) print \
((struct MemoryRegionIORange*)ioport_opaque[0xcf9])->mr->ops.write
$4 = (void (*)(void *, hwaddr, uint64_t, unsigned int))
0x7f3f5f6b42f1 <rcr_write>
The higher priority of "piix3-reset-control" ensures that the 0xcf9
entries in ioport_write_table / ioport_opaque will always belong to it,
independently of its relative registration order versus "pci-conf-idx".
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Fills out support for the pci assignment API. Added:
PCIINTxRoute ich9_route_intx_pin_to_irq(void *opaque, int pirq_pin)
Add calls to pci_bus_fire_intx_routing_notifier() when routing changes
are made.
Signed-off-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch makes rx commands consistent with specification.
Signed-off-by: Amos Kong <akong@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In virtio-net guest driver, currently we write MAC address to
pci config space byte by byte, this means that we have an
intermediate step where mac is wrong. This patch introduced
a new control command to set MAC address, it's atomic.
VIRTIO_NET_F_CTRL_MAC_ADDR is a new feature bit for compatibility.
"mac" field will be set to read-only when VIRTIO_NET_F_CTRL_MAC_ADDR
is acked.
Signed-off-by: Amos Kong <akong@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Virtio-net code makes assumption about virtqueue descriptor layout
(e.g. sg[0] is the header, sg[1] is the data buffer).
This patch makes code not rely on the layout of descriptors.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Amos Kong <akong@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Once guest overrides virtio net primary mac,
it retains the value set until qemu exit.
This is inconsistent with standard nic behaviour.
To fix, revert the mac to the original value on reset.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add code comment to clarify the reason we set ICS with ICR:
the reason was previously undocumented and git
log confused rather than clarified the comments.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
set_bit on indicators doesn't go well on 32 bit targets:
note: expected 'long unsigned int *' but argument is of type 'uint64_t *'
Switch to bit shifts instead.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
[agraf: use 1ULL instead]
Signed-off-by: Alexander Graf <agraf@suse.de>
Changed error codes in the channel subsystem / virtio-ccw code
(-EOPNOTSUPP -> -ENOSYS, -ERESTART -> -EINPROGRESS).
This should hopefully fix building on mingw32.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Map the I/O interruption code before calling into css.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Add a new machine type, s390-ccw-virtio, making use of the
virtio-ccw transport to present virtio devices as channel
devices.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
s390_virtio_bus_find_mem() may return a NULL VirtIOS390Device.
If called with, e.g., args[0] == 0, this leads to a segfault.
Fix this by adding error handling as done for other hypercalls.
Present since baf0b55a9e (Implement
virtio reset).
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
This moves all files only used by s390 system emulation to hw/s390x.
Signed-off-by: Alexander Graf <agraf@suse.de>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
virtio-s390 devices are not being reset when their bus is. To fix
this, add a reset method that forwards to virtio_reset. This is
only needed because of the "strange" modeling of virtio devices;
the ->vdev link is being handled manually rather than through qdev.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Add a new virtio transport that uses channel commands to perform
virtio operations.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Some of the machine initialization for s390-virtio will be reused
by virtio-ccw.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Provide a mechanism for qemu to provide fully virtual subchannels to
the guest.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
The current s390 machine uses the virtio console as default console,
but this doesn't mean that we always want to keep it that way for new
machines.
This patch introduces a way for a machine type to specify that it wants
the default console to be an SCLP console, which is a lot closer to what
real hardware does.
Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Andreas Färber <afaerber@suse.de>
* afaerber/qom-cpu: (37 commits)
kvm: Pass CPUState to kvm_on_sigbus_vcpu()
cpu: Unconditionalize CPUState fields
target-m68k: Use type_register() instead of type_register_static()
target-unicore32: Use type_register() instead of type_register_static()
target-openrisc: Use type_register() instead of type_register_static()
target-unicore32: Catch attempt to instantiate abstract type in cpu_init()
target-openrisc: Catch attempt to instantiate abstract type in cpu_init()
target-m68k: Catch attempt to instantiate abstract type in cpu_init()
target-arm: Catch attempt to instantiate abstract type in cpu_init()
target-alpha: Catch attempt to instantiate abstract type in cpu_init()
qom: Introduce object_class_is_abstract()
target-unicore32: Detect attempt to instantiate non-CPU type in cpu_init()
target-openrisc: Detect attempt to instantiate non-CPU type in cpu_init()
target-m68k: Detect attempt to instantiate non-CPU type in cpu_init()
target-alpha: Detect attempt to instantiate non-CPU type in cpu_init()
target-arm: Detect attempt to instantiate non-CPU type in cpu_init()
cpu: Add model resolution support to CPUClass
target-i386: Remove setting tsc-frequency from x86_def_t
target-i386: Set custom features/properties without intermediate x86_def_t
target-i386: Remove vendor_override field from CPUX86State
...
Conflicts:
tests/Makefile
Resolved simple conflict caused by lack of context in Makefile
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
# By Paolo Bonzini (14) and others
# Via Kevin Wolf
* kwolf/for-anthony: (24 commits)
ide: Add fall through annotations
block: Create proper size file for disk mirror
ahci: Add migration support
ahci: Change data types in preparation for migration
ahci: Remove unused AHCIDevice fields
hbitmap: add assertion on hbitmap_iter_init
mirror: do nothing on zero-sized disk
block/vdi: Check for bad signature
block/vdi: Improved return values from vdi_open
block/vdi: Improve debug output for signature
block: Use error code EMEDIUMTYPE for wrong format in some block drivers
block: Add special error code for wrong format
mirror: support arbitrarily-sized iterations
mirror: support more than one in-flight AIO operation
mirror: add buf-size argument to drive-mirror
mirror: switch mirror_iteration to AIO
mirror: allow customizing the granularity
block: allow customizing the granularity of the dirty bitmap
block: return count of dirty sectors, not chunks
mirror: perform COW if the cluster size is bigger than the granularity
...
# By Lei Li (3) and others
# Via Luiz Capitulino
* luiz/queue/qmp:
QAPI: Introduce memchar-read QMP command
QAPI: Introduce memchar-write QMP command
qemu-char: Add new char backend CirMemCharDriver
docs: document virtio-balloon stats
balloon: re-enable balloon stats
balloon: drop old stats code & API
block: Monitor command commit neglects to report some errors
Jason Wang