Since TCG_TYPE_I32 values are kept sign-extended in registers, via "w"
instructions, we don't need to extend if the register matches.
This is already relied upon by comparisons.
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We will want a backend interface for register swapping.
This is only properly defined for x86; all others get a
stub version that always indicates failure.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This is common code in most qemu_{ld,st} slow paths, extending the
input value for the store helper data argument or extending the
return value from the load helper.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We will need a backend interface for type truncation. For those backends
that did not enable TCG_TARGET_HAS_extrl_i64_i32, use tcg_out_mov.
Use it in tcg_reg_alloc_op in the meantime.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We will need a backend interface for type extension with zero.
Use it in tcg_reg_alloc_op in the meantime.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We will need a backend interface for type extension with sign.
Use it in tcg_reg_alloc_op in the meantime.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We will need a backend interface for performing 32-bit zero-extend.
Use it in tcg_reg_alloc_op in the meantime.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We will need a backend interface for performing 32-bit sign-extend.
Use it in tcg_reg_alloc_op in the meantime.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We will need a backend interface for performing 16-bit zero-extend.
Use it in tcg_reg_alloc_op in the meantime.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We will need a backend interface for performing 16-bit sign-extend.
Use it in tcg_reg_alloc_op in the meantime.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We will need a backend interface for performing 8-bit zero-extend.
Use it in tcg_reg_alloc_op in the meantime.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We will need a backend interface for performing 8-bit sign-extend.
Use it in tcg_reg_alloc_op in the meantime.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
For both _CALL_SYSV and _CALL_DARWIN, return is by reference,
not in 4 integer registers. For _CALL_SYSV, argument is also
by reference.
This error resulted in
$ ./qemu-system-i386 -nographic
qemu-system-i386: tcg/ppc/tcg-target.c.inc:185: \
tcg_target_call_oarg_reg: Assertion `slot >= 0 && slot <= 1' failed.
Fixes: 5427a9a760 ("tcg: Add TCG_TARGET_CALL_{RET,ARG}_I128")
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The return is by reference, not in 4 integer registers.
This error resulted in
qemu-system-i386: tcg/mips/tcg-target.c.inc:140: \
tcg_target_call_oarg_reg: Assertion `slot >= 0 && slot <= 1' failed.
Fixes: 5427a9a760 ("tcg: Add TCG_TARGET_CALL_{RET,ARG}_I128")
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We can arrive here on _WIN64 because Int128 is passed by reference.
Change the assert to check that the immediate is in range,
instead of attempting to check the host ABI.
Fixes: 6a6d772e30 ("tcg: Introduce tcg_out_addi_ptr")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1581
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Something is wrong with this code, and also wrong with gdb on the
sparc systems to which I have access, so I cannot debug it either.
Disable for now, so the release is not broken.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
qemu-user can hang in a multi-threaded fork. One common
reason is that when creating a TB, between fork and exec
we manipulate a GTree whose memory allocator (GSlice) is
not fork-safe.
Although POSIX does not mandate it, the system's allocator
(e.g. tcmalloc, libc malloc) is probably fork-safe.
Fix some of these hangs by using QTree, which uses the system's
allocator regardless of the Glib version that we used at
configuration time.
Tested with the test program in the original bug report, i.e.:
```
void garble() {
int pid = fork();
if (pid == 0) {
exit(0);
} else {
int wstatus;
waitpid(pid, &wstatus, 0);
}
}
void supragarble(unsigned depth) {
if (depth == 0)
return ;
std::thread a(supragarble, depth-1);
std::thread b(supragarble, depth-1);
garble();
a.join();
b.join();
}
int main() {
supragarble(10);
}
```
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/285
Reported-by: Valentin David <me@valentindavid.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Emilio Cota <cota@braap.org>
Message-Id: <20230205163758.416992-3-cota@braap.org>
[rth: Add QEMU_DISABLE_CFI for all callback using functions.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Now that we call qemu_plugin_disable_mem_helpers in cpu_tb_exec,
we don't need to do this in generated code as well.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230310195252.210956-3-richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230315174331.2959-13-alex.bennee@linaro.org>
Reviewed-by: Emilio Cota <cota@braap.org>
These functions are no longer used.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Replace with tcg_constant_vec*.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
These three instances got missed in previous conversion.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Move the tcg_temp_free_* and tcg_temp_ebb_new_* declarations
and inlines to the new header. These are private to the
implementation, and will prevent tcg_temp_free_* from creeping
back into the guest front ends.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Since all temps allocated by guest front-ends are now TEMP_TB,
and we don't recycle TEMP_TB, there's no point in requiring
that the front-ends free the temps at all. Begin by dropping
the inner-most checks that all temps have been freed.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
While we do not include these in tcg_target_reg_alloc_order,
and therefore they ought never be allocated, it seems safer
to mark them reserved as well.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Replace the two uses of asm to expand xgetbv with an inline function.
Since one of the two has been using the mnemonic, assume that the
comment about "older versions of the assember" is obsolete, as even
that is 4 years old.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Remove the first label and redirect all uses to the second.
Tested-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This allows us to easily find all branches that use a label.
Since 'refs' is only tested vs zero, remove it and test for
an empty list instead. Drop the use of bitfields, which had
been used to pack refs into a single 32-bit word.
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
When CONFIG_PROFILER is set there are various undefined references to
profile_getclock. Include the header which defines this function.
For example:
../tcg/tcg.c: In function ‘tcg_gen_code’:
../tcg/tcg.c:4905:51: warning: implicit declaration of function ‘profile_getclock’ [-Wimplicit-function-declaration]
4905 | qatomic_set(&prof->opt_time, prof->opt_time - profile_getclock());
| ^~~~~~~~~~~~~~~~
Signed-off-by: Richard W.M. Jones <rjones@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230303084948.3351546-1-rjones@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reusing TEMP_TB interferes with detecting whether the
temp can be adjusted to TEMP_EBB.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
All of these have obvious and quite local scope.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
While the argument can only be TEMP_EBB or TEMP_TB,
it's more obvious this way.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
TEMP_NORMAL is a subset of TEMP_EBB. Promote single basic
block temps to single extended basic block.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Attempt to reduce the lifetime of TEMP_TB.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This makes it easier to assign blame with perf.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Use TEMP_TB as that is more explicit about the default
lifetime of the data. While "global" and "local" used
to be contrasting, we have more lifetimes than that now.
Do not yet rename tcg_temp_local_new_*, just the enum.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Just because the label reference count is more than 1 does
not mean we cannot remove a branch-to-next. By doing this
first, the label reference count may drop to 0, and then
the label itself gets removed as before.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Change the temps_in_use check to use assert not fprintf.
Move the assert for double-free before the check for count,
since that is the more immediate problem.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221219170806.60580-3-philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221219170806.60580-2-philmd@linaro.org>
This commit was created with scripts/clean-includes.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20230202133830.2152150-19-armbru@redhat.com>
'offset' should be bits [23:5] of LDR instruction, rather than [4:0].
Fixes: d59d83a1c3 ("tcg/aarch64: Reorg goto_tb implementation")
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Reported-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Normally this is automatically handled by the CF_PARALLEL checks
with in tcg_gen_atomic_cmpxchg_i{32,64}, but x86 has a special
case of !PREFIX_LOCK where it always wants the non-atomic version.
Split these out so that x86 does not have to roll its own.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This will allow targets to avoid rolling their own.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
These are not yet considering atomicity of the 16-byte value;
this is a direct replacement for the current target code which
uses a pair of 8-byte operations.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add code generation functions for data movement between
TCGv_i128 (mov) and to/from TCGv_i64 (concat, extract).
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This enables allocation of i128. The type is not yet
usable, as we have not yet added data movement ops.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Fill in the parameters for the host ABI for Int128 for
those backends which require no extra modification.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Fill in the parameters for libffi for Int128.
Adjust the interpreter to allow for 16-byte return values.
Adjust tcg_out_call to record the return value length.
Call parameters are no longer all the same size, so we
cannot reuse the same call_slots array for every function.
Compute it each time now, but only fill in slots required
for the call we're about to make.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We expect the backend to require register pairs in
host-endian ordering, thus for big-endian the first
register of a pair contains the high part.
We were forcing R0 to contain the low part for calls.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Fill in the parameters for the host ABI for Int128.
Adjust tcg_target_call_oarg_reg for _WIN64, and
tcg_out_call for i386 sysv. Allow TCG_TYPE_V128
stores without AVX enabled.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This will be used by _WIN64 to return i128. Not yet used,
because allocation is not yet enabled.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Replace the flat array tcg_target_call_oarg_regs[] with
a function call including the TCGCallReturnKind.
Extend the set of registers for ARM to r0-r3 to match the ABI:
https://github.com/ARM-software/abi-aa/blob/main/aapcs32/aapcs32.rst#result-return
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
These will be used by some hosts, both 32 and 64-bit, to pass and
return i128. Not yet used, because allocation is not yet enabled.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Implement the function for arm, i386, and s390x, which will use it.
Add stubs for all other backends.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
When allocating a temp to the stack frame, consider the
base type and allocate all parts at once.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Many hosts pass and return 128-bit quantities like sequential
64-bit quantities. Treat this just like we currently break
down 64-bit quantities for a 32-bit host.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Correctly handle large types while lowering.
Fixes: fac87bd2a4 ("tcg: Add temp_subindex to TCGTemp")
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
There are actually a whole bunch of helpers that don't affect memory
that we shouldn't instrument. They are helpfully identified by the
TCG_CALL_NO_SIDE_EFFECTS flag which marks out lookup_tb_ptr as well as
a lot of the maths helpers. To avoid the string compare we introduce a
new flag for plugin internals so we skip that too.
Related: #1381
Signed-off-by: Emilio Cota <cota@braap.org>
Message-Id: <20230108164731.61469-4-cota@braap.org>
[AJB: updated to skip all no SE plugins, add flag for plugin helper]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230124180127.1881110-34-alex.bennee@linaro.org>
The old implementation replaces two insns, swapping between
b <dest>
nop
and
pcaddu18i tmp, <dest>
jirl zero, tmp, <dest> & 0xffff
There is a race condition in which a thread could be stopped at
the jirl, i.e. with the top of the address loaded, and when
restarted we have re-linked to a different TB, so that the top
half no longer matches the bottom half.
Note that while we never directly re-link to a different TB, we
can link, unlink, and link again all while the stopped thread
remains stopped.
The new implementation replaces only one insn, swapping between
b <dest>
and
pcadd tmp, <jmp_addr>
falling through to load the address from tmp, and branch.
Reviewed-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Take the w^x split into account when computing the
pc-relative distance to an absolute pointer.
Reviewed-by: WANG Xuerui <git@xen0n.name>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Split out a helper function, tcg_out_setcond_int, which
does not always produce the complete boolean result, but
returns a set of flags to do so.
Accept all int32_t as constant input, so that LE/GT can
adjust the constant to LT.
Reviewed-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Adjust the constraints to allow any int32_t for immediate
addition. Split immediate adds into addu16i + addi, which
covers quite a lot of the immediate space. For the hole in
the middle, load the constant into TMP0 instead.
Reviewed-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Regenerate with ADDU16I included:
$ cd loongarch-opcodes/scripts/go
$ go run ./genqemutcgdefs > $QEMU/tcg/loongarch64/tcg-insn-defs.c.inc
Reviewed-by: WANG Xuerui <git@xen0n.name>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Although we still can't use ldrd and strd for all operations,
increase the chances by getting the register allocation correct.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We have a test for one of TCG_TARGET_HAS_mulu2_i32 or
TCG_TARGET_HAS_muluh_i32 being defined, but the test
became non-functional when we changed to always define
all of these macros.
Replace this with a build-time test in tcg_gen_mulu2_i32.
Fixes: 25c4d9cc84 ("tcg: Always define all of the TCGOpcode enum members.")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1435
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We failed to update this with the w^x split, so misses the fact
that true pc-relative offsets are usually small.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230117230415.354239-1-richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Now that tcg can handle direct and indirect goto_tb simultaneously,
we can optimistically leave space for a direct branch and fall back
to loading the pointer from the TB for an indirect branch.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Now that tcg can handle direct and indirect goto_tb
simultaneously, we can optimistically leave space for
a direct branch and fall back to loading the pointer
from the TB for an indirect branch.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The old sparc64 implementation may replace two insns, which leaves
a race condition in which a thread could be stopped at a PC in the
middle of the sequence, and when restarted does not see the complete
address computation and branches to nowhere.
The new implemetation replaces only one insn, swapping between a
direct branch and a direct call. The TCG_REG_TB register is loaded
from tb->jmp_target_addr[] in the delay slot.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This is always true for sparc64, so this is dead since 3a5f6805c7.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The old ppc64 implementation replaces 2 or 4 insns, which leaves a race
condition in which a thread could be stopped at a PC in the middle of
the sequence, and when restarted does not see the complete address
computation and branches to nowhere.
The new implemetation replaces only one insn, swapping between
b <dest>
and
mtctr r31
falling through to a general-case indirect branch.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The old implementation replaces two insns, swapping between
b <dest>
nop
br x30
and
adrp x30, <dest>
addi x30, x30, lo12:<dest>
br x30
There is a race condition in which a thread could be stopped at
the PC of the second insn, and when restarted does not see the
complete address computation and branches to nowhere.
The new implemetation replaces only one insn, swapping between
b <dest>
br tmp
and
ldr tmp, <jmp_addr>
br tmp
Reported-by: hev <r@hev.cc>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We now have the option to generate direct or indirect
goto_tb depending on the dynamic displacement, thus
the define is no longer necessary or completely accurate.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Install empty versions for !TCG_TARGET_HAS_direct_jump hosts.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Replace 'tc_ptr' and 'addr' with 'tb' and 'n'.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Stop overloading jmp_target_arg for both offset and address,
depending on TCG_TARGET_HAS_direct_jump. Instead, add a new
field to hold the jump insn offset and always set the target
address in jmp_target_addr[]. This will allow a tcg backend
to use either direct or indirect depending on displacement.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This can replace four other variables that are references
into the TranslationBlock structure.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This will shortly be used for more than reset.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The INDEX_op_goto_tb opcode needs no register allocation.
Split out a dedicated helper function for it.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Similar to the existing set_jmp_reset_offset. Include the
rw->rx address space conversion done by arm and s390x, and
forgotten by mips and riscv.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Similar to the existing set_jmp_reset_offset. Move any assert for
TCG_TARGET_HAS_direct_jump into the new function (which now cannot
be build-time). Will be unused if TCG_TARGET_HAS_direct_jump is
constant 0, but we can't test for constant in the preprocessor,
so just mark it G_GNUC_UNUSED.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Test TCG_TARGET_HAS_direct_jump instead of testing an
implementation pointer.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The INDEX_op_exit_tb opcode needs no register allocation.
Split out a dedicated helper function for it.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add ability to dump /tmp/perf-<pid>.map and jit-<pid>.dump.
The first one allows the perf tool to map samples to each individual
translation block. The second one adds the ability to resolve symbol
names, line numbers and inspect JITed code.
Example of use:
perf record qemu-x86_64 -perfmap ./a.out
perf report
or
perf record -k 1 qemu-x86_64 -jitdump ./a.out
DEBUGINFOD_URLS= perf inject -j -i perf.data -o perf.data.jitted
perf report -i perf.data.jitted
Co-developed-by: Vanderson M. do Rosario <vandersonmr2@gmail.com>
Co-developed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20230112152013.125680-4-iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
- drop support for pre-z196 cpus (eol before 2017)
- add support for misc-instruction-extensions-3
- misc cleanups
-----BEGIN PGP SIGNATURE-----
iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmO5I68dHHJpY2hhcmQu
aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV8qOAgAgfLyzz5yajzVD0TZ
ufEw07Jlgw2th4Il4FZ3cKVaO9X1Sec9yTLaDXSByKJzTHQXso4Y7hBHciKjC8s4
LatuVWJaUdYUHry39iDgjvKb+ZrQ1ajve1sDNrIrCj5ITqoGT23f1NxQSS+0MhPB
cMVIEmiblPlynKDtOYBE9lcrkUFOBUqxqnV734AP1gOVyJOMjaVtm9T4wKIipC2M
UOXKOo/YPYeygSUFZdrmjoaJE0qCyJbpQqVDGUPXN2Md7UADfVhIo9jrbnvmr7BR
OfWDPuuVdt5g7P+TzLe0BXKPmbyqGi4vnjwPWNSl4ow+8xbxQ8fsSjpyx9kKd1i1
swoGSQ==
=gWI0
-----END PGP SIGNATURE-----
Merge tag 'pull-tcg-20230106' of https://gitlab.com/rth7680/qemu into staging
tcg/s390x improvements:
- drop support for pre-z196 cpus (eol before 2017)
- add support for misc-instruction-extensions-3
- misc cleanups
# gpg: Signature made Sat 07 Jan 2023 07:47:59 GMT
# gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg: issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full]
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F
* tag 'pull-tcg-20230106' of https://gitlab.com/rth7680/qemu: (27 commits)
tcg/s390x: Avoid the constant pool in tcg_out_movi
tcg/s390x: Cleanup tcg_out_movi
tcg/s390x: Tighten constraints for 64-bit compare
tcg/s390x: Implement ctpop operation
tcg/s390x: Use tgen_movcond_int in tgen_clz
tcg/s390x: Support SELGR instruction in movcond
tcg/s390x: Generalize movcond implementation
tcg/s390x: Create tgen_cmp2 to simplify movcond
tcg/s390x: Support MIE3 logical operations
tcg/s390x: Tighten constraints for and_i64
tcg/s390x: Tighten constraints for or_i64 and xor_i64
tcg/s390x: Issue XILF directly for xor_i32
tcg/s390x: Support MIE2 MGRK instruction
tcg/s390x: Support MIE2 multiply single instructions
tcg/s390x: Distinguish RIE formats
tcg/s390x: Distinguish RRF-a and RRF-c formats
tcg/s390x: Use LARL+AGHI for odd addresses
tcg/s390x: Remove DISTINCT_OPERANDS facility check
tcg/s390x: Remove FAST_BCR_SER facility check
tcg/s390x: Check for load-on-condition facility at startup
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Load constants in no more than two insns, which turns
out to be faster than using the constant pool.
Suggested-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Merge maybe_out_small_movi, as it no longer has additional users.
Use is_const_p{16,32}.
Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Give 64-bit comparison second operand a signed 33-bit immediate.
This is the smallest superset of uint32_t and int32_t, as used
by CLGFI and CGFI respectively. The rest of the 33-bit space
can be loaded into TCG_TMP0. Drop use of the constant pool.
Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
There is an older form that produces per-byte results,
and a newer form that produces per-register results.
Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reuse code from movcond to conditionally copy a2 to dest,
based on the condition codes produced by FLOGR.
Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The new select instruction provides two separate register inputs,
whereas the old load-on-condition instruction overlaps one of the
register inputs with the destination.
Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Generalize movcond to support pre-computed conditions, and the same
set of arguments at all times. This will be assumed by a following
patch, which needs to reuse tgen_movcond_int.
Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Return both regular and inverted condition codes from tgen_cmp2.
This lets us choose after the fact which comparision we want.
Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This is andc, orc, nand, nor, eqv.
We can use nor for implementing not.
Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Let the register allocator handle such immediates by matching
only what one insn can achieve.
Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Drop support for sequential OR and XOR, as the serial dependency is
slower than loading the constant first. Let the register allocator
handle such immediates by matching only what one insn can achieve.
Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
There is only one instruction that is applicable
to a 32-bit immediate xor.
Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The MIE2 facility adds a 3-operand signed 64x64->128 multiply.
Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
There are multiple variations, with different fields.
Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
One has 3 register arguments; the other has 2 plus an m3 field.
Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add one instead of dropping odd addresses to the constant pool.
Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The distinct-operands facility is bundled into facility 45,
along with load-on-condition. We are checking this at startup.
Remove the a0 == a1 checks for 64-bit sub, and, or, xor, as there
is no space savings for avoiding the distinct-operands insn.
Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The fast-bcr-serialization facility is bundled into facility 45,
along with load-on-condition. We are checking this at startup.
Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The general-instruction-extension facility was introduced in z196,
which itself was end-of-life in 2021. In addition, z196 is the
minimum CPU supported by our set of supported operating systems:
RHEL 7 (z196), SLES 12 (z196) and Ubuntu 16.04 (zEC12).
Check for facility number 45, which will be the consilidated check
for several facilities.
Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The general-instruction-extension facility was introduced in z10,
which itself was end-of-life in 2019.
Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The extended-immediate facility was introduced in z9-109,
which itself was end-of-life in 2017.
Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We are already assuming the existance of long-displacement, but were
not being explicit about it. This has been present since z990.
Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The size of a compiled TB is limited by the uint16_t used by
gen_insn_end_off[] -- there is no need for a 32-bit branch.
Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Since USE_REG_TB is removed, there is no need to load the
target TB address into a register.
Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This reverts 829e1376d9 ("tcg/s390: Introduce TCG_REG_TB"), and
several follow-up patches. The primary motivation is to reduce the
less-tested code paths, pre-z10. Secondarily, this allows the
unconditional use of TCG_TARGET_HAS_direct_jump, which might be more
important for performance than any slight increase in code size.
Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
v4: Do not simplify tgen_ori, tgen_xori.
* Fix PMP propagation for tlb
* Collection of bug fixes
* Bump the OpenTitan supported version
* Add smstateen support
* Support native debug icount trigger
* Remove the redundant ipi-id property in the virt machine
* Support cache-related PMU events in virtual mode
* Add some missing PolarFire SoC io regions
* Fix mret exception cause when no pmp rule is configured
* Fix bug where disabling compressed instructions would crash QEMU
* Add Zawrs ISA extension support
* A range of code refactoring and cleanups
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEE9sSsRtSTSGjTuM6PIeENKd+XcFQFAmO3b5sACgkQIeENKd+X
cFTD8Af+L0OaGzE4C0jil7LdITFKk7ltdTg3yw84ZBvIxrEWMWlt5Yj3Ez5OIPbY
WpPmCLoJ9XM/5CV5PuPjxcFFExWjXLNeMEvaaT/3/3jPPnA/M/AbZa4hefKRluTg
kkvBiOuRMPXiYLki5xAHmjD/1j6SQ8ghylPLxYQqyGq87WZt4Dx9msOTZLVzmmYl
8y9oC8j6yO2UBZYC1TxSkKxFbj+Cp2HmtBZ09tDzwRL6DpRvIlfftiLl8X3awMlK
YTzCIrmllc38/+cV9IpQhdXzDUZ1kM7Zy56JbJl3XOsS4VnUYGmEtrKYpYQ2CKLY
/tcmrDKNw1ArWcP1axNN8FHfhy1FyQ==
=SH+C
-----END PGP SIGNATURE-----
Merge tag 'pull-riscv-to-apply-20230106' of https://github.com/alistair23/qemu into staging
First RISC-V PR for QEMU 8.0
* Fix PMP propagation for tlb
* Collection of bug fixes
* Bump the OpenTitan supported version
* Add smstateen support
* Support native debug icount trigger
* Remove the redundant ipi-id property in the virt machine
* Support cache-related PMU events in virtual mode
* Add some missing PolarFire SoC io regions
* Fix mret exception cause when no pmp rule is configured
* Fix bug where disabling compressed instructions would crash QEMU
* Add Zawrs ISA extension support
* A range of code refactoring and cleanups
# gpg: Signature made Fri 06 Jan 2023 00:47:23 GMT
# gpg: using RSA key F6C4AC46D4934868D3B8CE8F21E10D29DF977054
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [full]
# Primary key fingerprint: F6C4 AC46 D493 4868 D3B8 CE8F 21E1 0D29 DF97 7054
* tag 'pull-riscv-to-apply-20230106' of https://github.com/alistair23/qemu: (43 commits)
hw/intc: sifive_plic: Fix the pending register range check
hw/riscv: opentitan: Drop "hartid-base" and "priority-base" initialization
hw/intc: sifive_plic: Change "priority-base" to start from interrupt source 0
hw/riscv: virt: Fix the value of "riscv, ndev" in the dtb
hw/riscv: sifive_u: Avoid using magic number for "riscv, ndev"
hw/riscv: sifive_e: Fix the number of interrupt sources of PLIC
hw/riscv: microchip_pfsoc: Fix the number of interrupt sources of PLIC
hw/intc: sifive_plic: Update "num-sources" property default value
hw/intc: sifive_plic: Use error_setg() to propagate the error up via errp in sifive_plic_realize()
hw/intc: sifive_plic: Improve robustness of the PLIC config parser
hw/intc: sifive_plic: Drop PLICMode_H
hw/riscv: spike: Remove misleading comments
hw/riscv: Sort machines Kconfig options in alphabetical order
hw/riscv: Fix opentitan dependency to SIFIVE_PLIC
hw/intc: Select MSI_NONBROKEN in RISC-V AIA interrupt controllers
hw/riscv: Select MSI_NONBROKEN in SIFIVE_PLIC
RISC-V: Add Zawrs ISA extension support
target/riscv: Clear mstatus.MPRV when leaving M-mode for priv spec 1.12+
target/riscv: Simplify helper_sret() a little bit
target/riscv: Set pc_succ_insn for !rvc illegal insn
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When guest_base != 0, we were not coordinating the usage of
TCG_REG_TMP0 as base properly, leading to a previous zero-extend
of the input address being discarded.
Shuffle the alignment check to the front, because that does not
depend on the zero-extend, and it keeps the register usage clear.
Set base after each step of the address arithmetic instead of before.
Return the base register used from tcg_out_tlb_load, so as to
keep that register choice localized to that function.
Reported-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221023233337.2846860-1-richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
There was a typo using opc_addi instead of opc_add with the
two registers. While we're at it, simplify the gating test
to al == bl to improve dynamic scheduling even when the
output register does not overlap the inputs.
Reported-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221020233836.2341671-1-richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We were matching a signed 13-bit range, not a 12-bit range.
Expand the commentary within the function and be explicit
about all of the ranges.
Reported-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221022095821.2441874-1-richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This eliminates an ifdef for TCI, and will be required for
expanding the call for TCGv_i128.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
There is only one use, and BLR is perhaps even more
self-documentary than CALLR.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Instead of requiring a separate hash table lookup,
put a pointer to the CIF into TCGHelperInfo.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221111074101.2069454-27-richard.henderson@linaro.org>
[PMD: Split from bigger patch]
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221122180804.938-4-philmd@linaro.org>
In the unlikely case of invalid typecode mask, the function
will abort instead of returning a NULL pointer.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221111074101.2069454-27-richard.henderson@linaro.org>
[PMD: Split from bigger patch]
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221122180804.938-2-philmd@linaro.org>
Pre-compute the function call layout for each helper at startup.
Drop TCG_CALL_DUMMY_ARG, as we no longer need to leave gaps
in the op->args[] array. This allows several places to stop
checking for NULL TCGTemp, to which TCG_CALL_DUMMY_ARG mapped.
For tcg_gen_callN, loop over the arguments once. Allocate the TCGOp
for the call early but delay emitting it, collecting arguments first.
This allows the argument processing loop to emit code for extensions
and have them sequenced before the call.
For tcg_reg_alloc_call, loop over the arguments in reverse order,
which allows stack slots to be filled first naturally.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We will shortly have the possibility of more that two outputs,
though only for calls (for which preferences are moot). Avoid
direct references to op->output_pref[] when possible.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We have been allocating a worst case number of arguments
to support calls. Instead, allow the size to vary.
By default leave space for 4 args, to maximize reuse,
but allow calls to increase the number of args to 32.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
[PMD: Split patch in two]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221218211832.73312-3-philmd@linaro.org>
In order to have variable size allocated TCGOp, pass the number
of arguments we use (and would allocate) up to tcg_op_alloc().
This alters tcg_emit_op(), tcg_op_insert_before() and
tcg_op_insert_after() prototypes.
In tcg_op_alloc() ensure the number of arguments is in range.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
[PMD: Extracted from bigger patch]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221218211832.73312-2-philmd@linaro.org>
Change 32-bit tci TCG_TARGET_CALL_ARG_I32 to TCG_CALL_ARG_EVEN, to
force 32-bit values to be aligned to 64-bit. With a small reorg
to the argument processing loop, this neatly replaces an ifdef for
CONFIG_TCG_INTERPRETER.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
For 64-bit hosts that had TCG_TARGET_EXTEND_ARGS, set
TCG_TARGET_CALL_ARG_I32 to TCG_CALL_ARG_EXTEND.
Otherwise, use TCG_CALL_ARG_NORMAL.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
For 32-bit hosts when TCG_TARGET_CALL_ALIGN_ARGS was set, use
TCG_CALL_ARG_EVEN. For 64-bit hosts, TCG_TARGET_CALL_ALIGN_ARGS
was silently ignored, so always use TCG_CALL_ARG_NORMAL.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Prepare to replace a bunch of separate ifdefs with a
consistent way to describe the ABI of a function call.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add a helper function for computing the size of a type.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Allocate the first of a pair at the lower address, and the
second of a pair at the higher address. This will make it
easier to find the beginning of the larger memory block.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The first thing that temp_sync does is check mem_coherent,
so there's no need for the caller to do so.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Record the location of a TCGTemp within a larger object.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Move the error-generating fallback from tcg-op.c, and
replace "_link_error" with modern QEMU_ERROR markup.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
There are several instances where we need to be able to
allocate a pair of registers to related inputs/outputs.
Add 'p' and 'm' register constraints for this, in order to
be able to allocate the even/odd register first or second.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In preparation of introducing paired registers,
massage a bit process_op_defs()'s switch case.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
[PMD: Split from bigger patch, 1/3]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221219220925.79218-2-philmd@linaro.org>
We now check the consistency of reg_to_temp[] with each update,
so the utility of checking consistency at the end of each
opcode is minimal. In addition, the form of this check is
quite expensive, consuming 10% of a checking-enabled build.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Create two new functions, set_temp_val_{reg,nonreg}.
Assert that the reg_to_temp mapping is correct before
any changes are made.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The assignment to mem_coherent should be done with any
modification, not simply with a newly allocated register.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Unused since commit 7b7d8b2d9a ("tcg/tci: Use ffi for calls").
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The hppa host code has been removed since 2013; this
should have been deleted at the same time.
Fixes: 802b508123 ("tcg-hppa: Remove tcg backend")
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Replace goto allocate_in_reg with a boolean.
Remove o_preferred_regs which isn't used, except to copy.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Remove whitespace at end of line, plus one place this also
highlights some missing braces.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We are going to modify this code, so fix its style first to avoid:
ERROR: spaces required around that '*' (ctx:VxV)
#281: FILE: tcg/s390x/tcg-target.c.inc:1224:
+ uintptr_t mask = ~(0xffffull << i*16);
^
Reviewed-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221130132654.76369-2-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Convert tcg/README to rst and move it to docs/devel as a new "TCG Intermediate
Representation" page. There are a few minor changes to improve the aesthetic
of the final output which are as follows:
- Rename the title from "Tiny Code Generator - Fabrice Bellard" to "TCG
Intermediate Representation"
- Remove the section numbering
- Add the missing parameters to the ssadd_vec operations in the "Host
vector operations" section
- Change the path to the Atomic Operations document to use a proper
reference
- Replace tcg/README in tcg.rst with a proper reference to the new document
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Message-Id: <20221130100434.64207-2-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
- cleanup win32/64 docker files
- update test-mingw test
- add flex/bison to debian-all-test
- handle --enable-static/--disable-pie in config
- extend timeouts on x86_64 avocado tests
- add flex/bison to debian-hexagon-cross
- use regular semihosting for nios2 check-tcg
- fix obscure linker error to nios2 softmmu tests
- various windows portability fixes for tests
- clean-up of MAINTAINERS
- use -machine none when appropriate in avocado
- make raspi2_initrd test detect shutdown
- disable sh4 rd2 tests on gitlab
- re-enable threadcount/linux-test for sh4
- clean-up s390x handling of "ex" instruction
- better handle new CPUs in execlog plugin
- pass CONFIG_DEBUG_TCG to plugin builds
- try and avoid races in test-io-channel-command
- speed up ssh key checking for tests/vm
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmNhI/MACgkQ+9DbCVqe
KkSFXggAg0HIpBDcNz0V5Mh5p69F14pwbDSygKqGDFBebdOHeL7f+WCvQPUGEWxp
814zjvRY3SC4Mo4mtzguRvNu0styaUpemvRw5FDYK48GpEjg2eVxTnAFD4nr7ud0
dhw3iaHP+RjA6s3EpPUqQ5nlZEgFJ+Tvkckk3wKSpksBYA4tJra6Uey5kpZ27x0T
KOzB2P6w+9B/B11n/aeSxvRPZdnXt2MyfS/3pwwfoFYioEyaEQ3Ie6ooachtdSL3
PEvnJVK0VVYbZQwBXJlycNLlK/D++s4AEwmnZ5GmvDFuXlkRO9YMy9Wa5TKJl7gz
76Aw1KHsE03SyAPvH4bE7eGkIwhJOQ==
=6hXE
-----END PGP SIGNATURE-----
Merge tag 'pull-testing-for-7.2-011122-3' of https://github.com/stsquad/qemu into staging
testing and plugin updates for 7.2:
- cleanup win32/64 docker files
- update test-mingw test
- add flex/bison to debian-all-test
- handle --enable-static/--disable-pie in config
- extend timeouts on x86_64 avocado tests
- add flex/bison to debian-hexagon-cross
- use regular semihosting for nios2 check-tcg
- fix obscure linker error to nios2 softmmu tests
- various windows portability fixes for tests
- clean-up of MAINTAINERS
- use -machine none when appropriate in avocado
- make raspi2_initrd test detect shutdown
- disable sh4 rd2 tests on gitlab
- re-enable threadcount/linux-test for sh4
- clean-up s390x handling of "ex" instruction
- better handle new CPUs in execlog plugin
- pass CONFIG_DEBUG_TCG to plugin builds
- try and avoid races in test-io-channel-command
- speed up ssh key checking for tests/vm
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmNhI/MACgkQ+9DbCVqe
# KkSFXggAg0HIpBDcNz0V5Mh5p69F14pwbDSygKqGDFBebdOHeL7f+WCvQPUGEWxp
# 814zjvRY3SC4Mo4mtzguRvNu0styaUpemvRw5FDYK48GpEjg2eVxTnAFD4nr7ud0
# dhw3iaHP+RjA6s3EpPUqQ5nlZEgFJ+Tvkckk3wKSpksBYA4tJra6Uey5kpZ27x0T
# KOzB2P6w+9B/B11n/aeSxvRPZdnXt2MyfS/3pwwfoFYioEyaEQ3Ie6ooachtdSL3
# PEvnJVK0VVYbZQwBXJlycNLlK/D++s4AEwmnZ5GmvDFuXlkRO9YMy9Wa5TKJl7gz
# 76Aw1KHsE03SyAPvH4bE7eGkIwhJOQ==
# =6hXE
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 01 Nov 2022 09:49:39 EDT
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* tag 'pull-testing-for-7.2-011122-3' of https://github.com/stsquad/qemu: (31 commits)
tests/vm: use -o IdentitiesOnly=yes for ssh
tests/unit: cleanups for test-io-channel-command
contrib/plugins: protect execlog's last_exec expansion
contrib/plugins: enable debug on CONFIG_DEBUG_TCG
tests/tcg: include CONFIG_PLUGIN in config-host.mak
target/s390x: fake instruction loading when handling 'ex'
target/s390x: don't probe next pc for EXecuted insns
target/s390x: don't use ld_code2 to probe next pc
tests/tcg: re-enable threadcount for sh4
tests/tcg: re-enable linux-test for sh4
tests/avocado: disable sh4 rd2 tests on Gitlab
tests/avocado: raspi2_initrd: Wait for guest shutdown message before stopping
tests/avocado: set -machine none for userfwd and vnc tests
MAINTAINERS: fix-up for check-tcg Makefile changes
MAINTAINERS: add features_to_c.sh to gdbstub files
MAINTAINERS: add entries for the key build bits
hw/usb: dev-mtp: Use g_mkdir()
block/vvfat: Unify the mkdir() call
tcg: Avoid using hardcoded /tmp
semihosting/arm-compat-semi: Avoid using hardcoded /tmp
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Use g_get_tmp_dir() to get the directory to use for temporary files.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221006151927.2079583-3-bmeng.cn@gmail.com>
Message-Id: <20221027183637.2772968-12-alex.bennee@linaro.org>
When registering helpers via FFI for TCI, the inner loop that iterates
parameters of the helper reuses (and thus pollutes) the same variable
used by the outer loop that iterates all helpers, thus made some helpers
unregistered.
Fix this logic error by using a dedicated temporary variable for the
inner loop.
Fixes: 22f15579fa ("tcg: Build ffi data structures for helpers")
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
Message-Id: <20221028072145.1593205-1-uwu@icenowy.me>
[rth: Move declaration of j to the for loop itself]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
With sparc64 we need not distinguish between registers that
can hold 32-bit values and those that can hold 64-bit values.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Emphasize that we only support full 64-bit code generation.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Since 9b9c37c364, we have only supported sparc64 cpus.
Debian and Gentoo now only support 64-bit sparc64 userland,
so it is time to drop the 32-bit sparc64 userland: sparc32plus.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
AArch64 defines the TCG_TARGET_HAS_direct_jump. So the "else" block is
useless in the case of "INDEX_op_goto_tb" in function "tcg_out_op". Add
an assertion and delete these codes for clarity.
Suggested-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Qi Hu <huqi@loongson.cn>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221017020826.990729-1-huqi@loongson.cn>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Similar to the ARM64, LoongArch has PC-relative instructions such as
PCADDU18I. These instructions can be used to support direct jump for
LoongArch. Additionally, if instruction "B offset" can cover the target
address(target is within ±128MB range), a single "B offset" plus a nop
will be used by "tb_target_set_jump_target".
Signed-off-by: Qi Hu <huqi@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: WANG Xuerui <git@xen0n.name>
Message-Id: <20221015092754.91971-1-huqi@loongson.cn>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
PowerPC64 processors handle direct branches better than indirect
ones, resulting in less stalled cycles and branch misses.
However, PPC's tb_target_set_jmp_target() was only using direct
branches for 16-bit jumps, while PowerPC64's unconditional branch
instructions are able to handle displacements of up to 26 bits.
To take advantage of this, now jumps whose displacements fit in
between 17 and 26 bits are also converted to direct branches.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Leandro Lupori <leandro.lupori@eldorado.org.br>
[rth: Expanded some commentary.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The availability of tb->pc will shortly be conditional.
Introduce accessor functions to minimize ifdefs.
Pass around a known pc to places like tcg_gen_code,
where the caller must already have the value.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220707163720.1421716-5-berrange@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This fixes a bug in POSIX-compliant environments. Since we had allocated
a buffer named 'tcg-jit' with read-write access protections we need a int
type to combine these access flags and return it, whereas we had inexplicably
return a bool type. It may cause an unnecessary protection change in
tcg_region_init().
Cc: qemu-stable@nongnu.org
Fixes: 7be9ebcf92 ("tcg: Return the map protection from alloc_code_gen_buffer")
Signed-off-by: Shaobo Song <shnusongshaobo@gmail.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220624150216.3627-1-shnusongshaobo@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
There is nothing in this environment variable that cannot
be done better with -d flags. There is nothing special
about TCI that warrants this hack.
Moreover, it does not compile -- remove it.
Reported-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Power ISA v3.0 introduced mod[su][wd] insns that can be used to
implement rem[u]_i{32,64}.
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The masking in tcg_out_shl was incorrect, producing an
illegal instruction, rather than merely unspecified results
for the out-of-range shift.
Tested-by: Joel Stanley <joel@jms.id.au>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1051
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We wanted the VPSRAQ variant with the scalar vector shift operand,
not the variant with an immediate operand.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1022
Fixes: 47b331b2a8 ("tcg/i386: Implement avx512 scalar shift")
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
lwsync orders more than just LD_LD, importantly it matches x86 and
s390 default memory ordering.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220519135908.21282-4-npiggin@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
eieio does not provide ordering between stores to CI memory and stores
to cacheable memory so it can't be used as a general ST_ST barrier.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-of-by: Nicholas Piggin <npiggin@gmail.com>
Message-Id: <20220519135908.21282-3-npiggin@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Move vmsumuhm and vmsumuhs to decodetree, declare vmsumuhm helper with
TCG_CALL_NO_RWG, and drop the unused env argument.
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220517123929.284511-12-matheus.ferst@eldorado.org.br>
[danielhb: added #undef VMSUMUHM to fix ppc64 build]
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
We commonly define the header guard symbol without an explicit value.
Normalize the exceptions.
Done with scripts/clean-header-guards.pl.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20220506134911.2856099-4-armbru@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Swap half-words (16-bit) and words (32-bit) within a larger value.
Mirrors functions of the same names within include/qemu/bitops.h.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: David Miller <dmiller423@gmail.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20220428094708.84835-5-david@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
G_NORETURN was introduced in glib 2.68, fallback to G_GNUC_NORETURN in
glib-compat.
Note that this attribute must be placed before the function declaration
(bringing a bit of consistency in qemu codebase usage).
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Message-Id: <20220420132624.2439741-20-marcandre.lureau@redhat.com>
With TCG_OPF_COND_BRANCH, we extended the lifetimes of
globals across extended basic blocks. This means that
the liveness computed in pass 1 does not kill globals
in the same way as normal temps.
Introduce TYPE_EBB to match this lifetime, so that we
get correct register allocation for the temps that we
introduce during the indirect lowering pass.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Fixes: b4cb76e620 ("tcg: Do not kill globals at conditional branches")
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
All uses flush output immediately before or after qemu_log_unlock.
Instead of a separate call, move the flush into qemu_log_unlock.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-20-richard.henderson@linaro.org>
We have already looked up and locked the filepointer.
Use fprintf instead of qemu_log directly for output
in and around tcg_dump_ops.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-12-richard.henderson@linaro.org>
Inside qemu_log, we perform qemu_log_trylock/unlock, which need
not be done if we have already performed the lock beforehand.
Always check the result of qemu_log_trylock -- only checking
qemu_loglevel_mask races with the acquisition of the lock on
the logfile.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-10-richard.henderson@linaro.org>
This function can fail, which makes it more like ftrylockfile
or pthread_mutex_trylock than flockfile or pthread_mutex_lock,
so rename it.
To closer match the other trylock functions, release rcu_read_lock
along the failure path, so that qemu_log_unlock need not be called
on failure.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-8-richard.henderson@linaro.org>
Replace the global variables with inlined helper functions. getpagesize() is very
likely annotated with a "const" function attribute (at least with glibc), and thus
optimization should apply even better.
This avoids the need for a constructor initialization too.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220323155743.1585078-12-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Replace a config-time define with a compile time condition
define (compatible with clang and gcc) that must be declared prior to
its usage. This avoids having a global configure time define, but also
prevents from bad usage, if the config header wasn't included before.
This can help to make some code independent from qemu too.
gcc supports __BYTE_ORDER__ from about 4.6 and clang from 3.2.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
[ For the s390x parts I'm involved in ]
Acked-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220323155743.1585078-7-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Typo used only 'ul' suffix, which is still 32-bits for windows host.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/947
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The LDRD (register) instruction is UNPREDICTABLE if the Rm register
is the same as either Rt or Rt+1 (the two registers being loaded to).
We weren't making sure we avoided this, with the result that on some
host CPUs like the Cortex-A7 we would get a SIGILL because the CPU
chooses to UNDEF for this particular UNPREDICTABLE case.
Since we've already checked that datalo is aligned, we can simplify
the test vs the Rm operand by aligning it before comparison. Check
for the two orderings before falling back to two ldr instructions.
We don't bother to do anything similar for tcg_out_ldrd_rwb(),
because it is only used in tcg_out_tlb_read() with a fixed set of
registers which don't overlap.
There is no equivalent UNPREDICTABLE case for STRD.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/896
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We copied the data from the general register input to the
vector register output, but have not yet replicated it.
We intended to fall through into the vector-vector case,
but failed to redirect the input register.
This is caught by an assertion failure in tcg_out_insn_VRIc,
which diagnosed the incorrect register class.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The operands are output in the wrong order: the tcg selector
argument is first, whereas the s390x selector argument is last.
Tested-by: Thomas Huth <thuth@redhat.com>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/898
Fixes: 9bca986df8 ("tcg/s390x: Implement TCG_TARGET_HAS_bitsel_vec")
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Move the various memalign-related functions out of osdep.h and into
their own header, which we include only where they are used.
While we're doing this, add some brief documentation comments.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20220226180723.1706285-10-peter.maydell@linaro.org
The general ternary logic operation can implement BITSEL.
Funnel the 4-operand operation into three variants of the
3-operand instruction, depending on input operand overlap.
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
AVX512VL has a general ternary logic operation, VPTERNLOGQ,
which can implement NOT, ORC, NAND, NOR, EQV.
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
AVX512DQ has VPMULLQ.
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
AVX512VL has VPABSQ, VPMAXSQ, VPMAXUQ, VPMINSQ, VPMINUQ.
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Expand 32-bit and 64-bit scalar rotate with VPRO[LR]V;
expand 16-bit scalar rotate with VPSHLDV.
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
There is no such instruction on x86, so we should
not be pretending it has arguments.
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
While there are no specific 16-bit rotate instructions, there
are double-word shifts, which can perform the same operation.
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We will use VPSHLD, VPSHLDV and VPSHRDV for 16-bit rotates.
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
AVX512VL has VPROLVD and VPRORVQ.
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
AVX512VL has VPROLD and VPROLQ, layered onto the same
opcode as PSHIFTD, but requires EVEX encoding and W1.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
AVX512 has VPSRAQ with immediate operand, in the same form as
with AVX, but requires EVEX encoding and W1.
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
AVX512VL has VPSRAQ.
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
AVX512VL has VPSRAVQ, and
AVX512BW has VPSLLVW, VPSRAVW, VPSRLVW.
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The condition for UMIN/UMAX availability is about to change;
use the canonical version.
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The evex encoding is added here, for use in a subsequent patch.
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
There are some operation sizes in some subsets of AVX512 that
are missing from previous iterations of AVX. Detect them.
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We've had placeholders for these opcodes for a while,
and should have support on ppc, s390x and avx512 hosts.
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The last entry of DEF_HELPERS_FLAGS_n is DEF_HELPER_FLAGS_7 and
thus the MAX_OPC_PARAM_IARGS should be 7.
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Signed-off-by: Ziqiao Kong <ziqiaokong@gmail.com>
Message-Id: <20220227113127.414533-2-ziqiaokong@gmail.com>
Fixes: e6cadf49c3 ("tcg: Add support for a helper with 7 arguments")
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
valgrind pointed out that arg_info()->val can be undefined which will
be the case if the arguments are not constant. The ordering of the
checks will have ensured we never relied on an undefined value but for
the sake of completeness re-order the code to be clear.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220209112142.3367525-1-alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Following the implementation of tcg_gen_gvec_3i, add a four-vector and
immediate operand expansion method.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Message-Id: <20220225210936.1749575-34-matheus.ferst@eldorado.org.br>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The tcg_out_ldst helper will handle out-of-range offsets.
We haven't actually encountered any, since we haven't run
across the assert within tcg_out_op_rrs, but an out-of-range
offset would not be impossible in future.
Fixes: 6508988918 ("tcg/tci: Change encoding to uint32_t units")
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The qemu_icache_linesize, qemu_icache_linesize_log,
qemu_dcache_linesize, and qemu_dcache_linesize_log variables are not
used in many files. Move them out of osdep.h to a new
qemu/cacheinfo.h, and document them.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220208200856.3558249-5-peter.maydell@linaro.org
The qemu_mprotect_*() family of functions are used in very few files;
move them from osdep.h to a new qemu/mprotect.h.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220208200856.3558249-3-peter.maydell@linaro.org
The function qemu_madvise() and the QEMU_MADV_* constants associated
with it are used in only 10 files. Move them out of osdep.h to a new
qemu/madvise.h header that is included where it is needed.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220208200856.3558249-2-peter.maydell@linaro.org
Fix host signal handling for sparc64-linux.
Speedups for jump cache and work list probing.
Fix for exception replays.
Raise guest SIGBUS for user-only misaligned accesses.
-----BEGIN PGP SIGNATURE-----
iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmIFu3QdHHJpY2hhcmQu
aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV9tHwf+KFk9Pa9M+vhnHTZJ
ZvIRs9BaSzoDYqxLlHSKmXN3w3G5PbIcbHVHXTty2o28bT0jk05T9zQn3TzMfcbl
O+Yx8rygUJmbzlEQ+GaSI69pppFj8ahlS/ylfwd5MABZun2mawexEU9sqXqGCKR9
kJY8IpkZ6vqEDONcS1ZMQ+HFsNvw6LYBd567SY8g9ZsyPLWtQSqwdcuPqAJDFWCv
zNe6b07IRoFVOsbtQix9Dl/ntMxk5jto+UvdEVuW2FJOeRZJRshLWF5cGHNavSgQ
Culb5ALOzoxSlcZ4xfVfWtBGoFr/BNu9D0omTSmbosvXAd4HmPVxD6kV17wXV3+g
G/cvew==
=D+x7
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/rth-gitlab/tags/pull-tcg-20220211' into staging
Fix safe_syscall_base for sparc64.
Fix host signal handling for sparc64-linux.
Speedups for jump cache and work list probing.
Fix for exception replays.
Raise guest SIGBUS for user-only misaligned accesses.
# gpg: Signature made Fri 11 Feb 2022 01:27:16 GMT
# gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg: issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full]
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F
* remotes/rth-gitlab/tags/pull-tcg-20220211: (34 commits)
tests/tcg/multiarch: Add sigbus.c
tcg/sparc: Support unaligned access for user-only
tcg/sparc: Add tcg_out_jmpl_const for better tail calls
tcg/sparc: Use the constant pool for 64-bit constants
tcg/sparc: Convert patch_reloc to return bool
tcg/sparc: Improve code gen for shifted 32-bit constants
tcg/sparc: Add scratch argument to tcg_out_movi_int
tcg/sparc: Split out tcg_out_movi_imm32
tcg/sparc: Use tcg_out_movi_imm13 in tcg_out_addsub2_i64
tcg/mips: Support unaligned access for softmmu
tcg/mips: Support unaligned access for user-only
tcg/arm: Support raising sigbus for user-only
tcg/arm: Reserve a register for guest_base
tcg/arm: Support unaligned access for softmmu
tcg/arm: Check alignment for ldrd and strd
tcg/arm: Remove use_armv6_instructions
tcg/arm: Remove use_armv5t_instructions
tcg/arm: Drop support for armv4 and armv5 hosts
tcg/loongarch64: Support raising sigbus for user-only
tcg/tci: Support raising sigbus for user-only
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
If you really want to trace all memory operations TCG plugins gives
you a more flexible interface for doing so.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Cc: Luis Vilanova <vilanova@imperial.ac.uk>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20220204204335.1689602-19-alex.bennee@linaro.org>
This is kinda sorta the opposite of the other tcg hosts, where
we get (normal) alignment checks for free with host SIGBUS and
need to add code to support unaligned accesses.
This inline code expansion is somewhat large, but it takes quite
a few instructions to make a function call to a helper anyway.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Due to mapping changes, we now rarely place the code_gen_buffer
near the main executable. Which means that direct calls will
now rarely be in range.
So, always use indirect calls for tail calls, which allows us to
avoid clobbering %o7, and therefore we need not save and restore it.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Since 7ecd02a06f, if patch_reloc fails we restart translation
with a smaller TB. SPARC had its function signature changed,
but not the logic. Replace assert with return false.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We had code for checking for 13 and 21-bit shifted constants,
but we can do better and allow 32-bit shifted constants.
This is still 2 insns shorter than the full 64-bit sequence.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This will allow us to control exactly what scratch register is
used for loading the constant.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Handle 32-bit constants with a separate function, so that
tcg_out_movi_int does not need to recurse. This slightly
rearranges the order of tests for small constants, but
produces the same output.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
When BH is constant, it is constrained to 11 bits for use in MOVCC.
For the cases in which we must load the constant BH into a register,
we do not need the full logic of tcg_out_movi; we can use the simpler
function for emitting a 13 bit constant.
This eliminates the only case in which TCG_REG_T2 was passed to
tcg_out_movi, which will shortly become invalid.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We can use the routines just added for user-only to emit
unaligned accesses in softmmu mode too.
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This is kinda sorta the opposite of the other tcg hosts, where
we get (normal) alignment checks for free with host SIGBUS and
need to add code to support unaligned accesses.
Fortunately, the ISA contains pairs of instructions that are
used to implement unaligned memory accesses. Use them.
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reserve a register for the guest_base using aarch64 for reference.
By doing so, we do not have to recompute it for every memory load.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
From armv6, the architecture supports unaligned accesses.
All we need to do is perform the correct alignment check
in tcg_out_tlb_read.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We will shortly allow the use of unaligned memory accesses,
and these require proper alignment. Use get_alignment_bits
to verify and remove USING_SOFTMMU.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This is now always true, since we require armv6.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This is now always true, since we require armv6.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Support for unaligned accesses is difficult for pre-v6 hosts.
While debian still builds for armv4, we cannot use a compile
time test, so test the architecture at runtime and error out.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: WANG Xuerui <git@xen0n.name>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220106134238.3936163-1-git@xen0n.name>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Richard Henderson