The support of single-stepping is very much dependent on support from
the accelerator we are using. To avoid special casing in gdbstub move
the probing out to an AccelClass function so future accelerators can
put their code there.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Mads Ynddal <mads@ynddal.dk>
Message-Id: <20220929114231.583801-44-alex.bennee@linaro.org>
Prepare for targets to be able to produce TBs that can
run in more than one virtual context.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The availability of tb->pc will shortly be conditional.
Introduce accessor functions to minimize ifdefs.
Pass around a known pc to places like tcg_gen_code,
where the caller must already have the value.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Wrap the bare TranslationBlock pointer into a structure.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This function has two users, who use it incompatibly.
In tlb_flush_page_by_mmuidx_async_0, when flushing a
single page, we need to flush exactly two pages.
In tlb_flush_range_by_mmuidx_async_0, when flushing a
range of pages, we need to flush N+1 pages.
This avoids double-flushing of jmp cache pages in a range.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Let tb->page_addr[0] contain the address of the first byte of the
translated block, rather than the address of the page containing the
start of the translated block. We need to recover this value anyway
at various points, and it is easier to discard a page offset when it
is not needed, which happens naturally via the existing find_page shift.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Use the pc coming from db->pc_first rather than the TB.
Use the cached host_addr rather than re-computing for the
first page. We still need a separate lookup for the second
page because it won't be computed for DisasContextBase until
the translator actually performs a read from the page.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Bool is more appropriate type for the alloc parameter.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This bitmap is created and discarded immediately.
We gain nothing by its existence.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220822232338.1727934-2-richard.henderson@linaro.org>
Now that we have collected all of the page data into
CPUTLBEntryFull, provide an interface to record that
all in one go, instead of using 4 arguments. This interface
allows CPUTLBEntryFull to be extended without having to
change the number of arguments.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add an interface to return the CPUTLBEntryFull struct
that goes with the lookup. The result is not intended
to be valid across multiple lookups, so the user must
use the results immediately.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
When PAGE_WRITE_INV is set when calling tlb_set_page,
we immediately set TLB_INVALID_MASK in order to force
tlb_fill to be called on the next lookup. Here in
probe_access_internal, we have just called tlb_fill
and eliminated true misses, thus the lookup must be valid.
This allows us to remove a warning comment from s390x.
There doesn't seem to be a reason to change the code though.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This field is only written, not read; remove it.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This structure will shortly contain more than just
data for accessing MMIO. Rename the 'addr' member
to 'xlat_section' to more clearly indicate its purpose.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Before: 35.912 s ± 0.168 s
After: 35.565 s ± 0.087 s
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220811151413.3350684-5-alex.bennee@linaro.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220923084803.498337-5-clg@kaod.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This is a follow-up for commit 892a4f6a75 ("linux-user: Add partial
support for MADV_DONTNEED"), which added passthrough for anonymous
mappings. File mappings can be handled in a similar manner.
In order to do that, mark pages, for which mmap() was passed through,
with PAGE_PASSTHROUGH, and then allow madvise() passthrough for these
pages. Drop the explicit PAGE_ANON check, since anonymous mappings are
expected to have PAGE_PASSTHROUGH anyway.
Add PAGE_PASSTHROUGH to PAGE_STICKY in order to keep it on mprotect().
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220725125043.43048-1-iii@linux.ibm.com>
Message-Id: <20220906000839.1672934-5-iii@linux.ibm.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Cache the translation from guest to host address, so we may
use direct loads when we hit on the primary translation page.
Look up the second translation page only once, during translation.
This obviates another lookup of the second page within tb_gen_code
after translation.
Fixes a bug in that plugin_insn_append should be passed the bytes
in the original memory order, not bswapped by pieces.
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Tested-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Pass these along to translator_loop -- pc may be used instead
of tb->pc, and host_pc is currently unused. Adjust all targets
at one time.
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Tested-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
It was non-obvious to me why we can raise an exception in
the middle of a comparison function, but it works.
While nearby, use TARGET_PAGE_ALIGN instead of open-coding.
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Simplify the implementation of get_page_addr_code_hostp
by reusing the existing probe_access infrastructure.
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Tested-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The base qemu_ram_addr_from_host function is already in
softmmu/physmem.c; move the nofail version to be adjacent.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Tested-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The function is not used outside of cpu-exec.c. Move it and
its subroutines up in the file, before the first use.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Tested-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The mmap_lock is held around tb_gen_code. While the comment
is correct that the lock is dropped when tb_gen_code runs out
of memory, the lock is *not* dropped when an exception is
raised reading code for translation.
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Tested-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The current implementation is a no-op, simply returning addr.
This is incorrect, because we ought to be checking the page
permissions for execution.
Make get_page_addr_code inline for both implementations.
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Tested-by: Ilya Leoshkevich <iii@linux.ibm.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
aarch64 stores MTE tags in target_date, and they should be reset by
MADV_DONTNEED.
Signed-off-by: Vitaly Buka <vitalybuka@google.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220711220028.2467290-1-vitalybuka@google.com>
[lv: fix code style issues]
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The function icount_prepare_for_run() is called with the iothread
unlocked, but it can call icount_notify_aio_contexts() which will
run qemu timer handlers. Those are supposed to be run only with
the iothread lock held, so take the lock while we do that.
Since icount mode runs everything on a single thread anyway,
not holding the lock is likely mostly not going to introduce
races, but it can cause us to trip over assertions that we
do hold the lock, such as the one reported in issue 1130.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1130
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Message-id: 20220801164527.3134765-1-peter.maydell@linaro.org
The documentation for PROT_MTE says that it cannot be cleared
by mprotect. Further, the implementation of the VM_ARCH_CLEAR bit,
contains PROT_BTI confiming that bit should be cleared.
Introduce PAGE_TARGET_STICKY to allow target/arch/cpu.h to control
which bits may be reset during page_set_flags. This is sort of the
opposite of VM_ARCH_CLEAR, but works better with qemu's PAGE_* bits
that are separate from PROT_* bits.
Reported-by: Vitaly Buka <vitalybuka@google.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220711031420.17820-1-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
If low-address-protection is active, unaligned stores to non-protected
parts of lowcore lead to protection exceptions. The reason is that in
such cases tlb_fill() call in store_helper_unaligned() covers
[0, addr + size) range, which contains the protected portion of
lowcore. This range is too large.
The most straightforward fix would be to make sure we stay within the
original [addr, addr + size) range. However, if an unaligned access
affects a single page, we don't need to call tlb_fill() in
store_helper_unaligned() at all, since it would be identical to
the previous tlb_fill() call in store_helper(), and therefore a no-op.
If an unaligned access covers multiple pages, this situation does not
occur.
Therefore simply skip TLB handling in store_helper_unaligned() if we
are dealing with a single page.
Fixes: 2bcf018340 ("s390x/tcg: low-address protection support")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20220711185640.3558813-2-iii@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reorg TCG AccelOpsClass initialization to emphasis icount
mode share more code with single-threaded TCG.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220323171751.78612-7-philippe.mathieu.daude@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
dump_opcount_info() is a one-line wrapper around tcg_dump_op_count()
which is also exported. So use the latter directly.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20220520180109.8224-10-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Commit 3a841ab53f 'qapi: introduce
x-query-jit QMP command' basically moved the only function using
dump_drift_info() to cpu-exec.c. Therefore, dump_drift_info() doesn't
need to be exported any longer.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20220520180109.8224-9-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
We have about 30 instances of the typo/variant spelling 'writeable',
and over 500 of the more common 'writable'. Standardize on the
latter.
Change produced with:
sed -i -e 's/\([Ww][Rr][Ii][Tt]\)[Ee]\([Aa][Bb][Ll][Ee]\)/\1\2/g' $(git grep -il writeable)
and then hand-undoing the instance in linux-headers/linux/kvm.h.
Most of these changes are in comments or documentation; the
exceptions are:
* a local variable in accel/hvf/hvf-accel-ops.c
* a local variable in accel/kvm/kvm-all.c
* the PMCR_WRITABLE_MASK macro in target/arm/internals.h
* the EPT_VIOLATION_GPA_WRITABLE macro in target/i386/hvf/vmcs.h
(which is never used anywhere)
* the AR_TYPE_WRITABLE_MASK macro in target/i386/hvf/vmx.h
(which is never used anywhere)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Message-id: 20220505095015.2714666-1-peter.maydell@linaro.org
This patch decouples checkpoints and async events.
It was a tricky part of replay implementation. Now it becomes
much simpler and easier to maintain.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <165364837856.688121.8785039478408995979.stgit@pasha-ThinkPad-X280>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Header guard symbols should match their file name to make guard
collisions less likely.
Cleaned up with scripts/clean-header-guards.pl, followed by some
renaming of new guard symbols picked by the script to better ones.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20220506134911.2856099-2-armbru@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
[Change to generated file ebpf/rss.bpf.skeleton.h backed out]
Coverity reports out-of-bound accesses within cputlb.c.
This should be a false positive due to how the index is
decoded from MemOpIdx. To be fair, nothing is checking
the correct bounds during encoding either.
Assert index in range before use, both to catch user errors
and to pacify static analysis.
Fixes: Coverity CID 1487120, 1487127, 1487170, 1487196, 1487215, 1487238
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220401170813.318609-1-richard.henderson@linaro.org>
G_NORETURN was introduced in glib 2.68, fallback to G_GNUC_NORETURN in
glib-compat.
Note that this attribute must be placed before the function declaration
(bringing a bit of consistency in qemu codebase usage).
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Message-Id: <20220420132624.2439741-20-marcandre.lureau@redhat.com>
The last use of this macro was removed in f3e182b100
("accel/tcg: Push trace info building into atomic_common.c.inc")
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This header only defines the tcg_allowed variable and the tcg_enabled()
function - which are not required in many files that include this
header. Drop the #include statement there.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20220315144107.1012530-1-thuth@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
All uses flush output immediately before or after qemu_log_unlock.
Instead of a separate call, move the flush into qemu_log_unlock.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-20-richard.henderson@linaro.org>
Inside log_cpu_state, we perform qemu_log_trylock/unlock, which need
not be done if we have already performed the lock beforehand.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-15-richard.henderson@linaro.org>
We have fetched and locked the logfile in translator_loop.
Pass the filepointer down to the disas_log hook so that it
need not be fetched and locked again.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-13-richard.henderson@linaro.org>
Inside qemu_log, we perform qemu_log_trylock/unlock, which need
not be done if we have already performed the lock beforehand.
Always check the result of qemu_log_trylock -- only checking
qemu_loglevel_mask races with the acquisition of the lock on
the logfile.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-10-richard.henderson@linaro.org>
This function can fail, which makes it more like ftrylockfile
or pthread_mutex_trylock than flockfile or pthread_mutex_lock,
so rename it.
To closer match the other trylock functions, release rcu_read_lock
along the failure path, so that qemu_log_unlock need not be called
on failure.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-8-richard.henderson@linaro.org>
Replace a config-time define with a compile time condition
define (compatible with clang and gcc) that must be declared prior to
its usage. This avoids having a global configure time define, but also
prevents from bad usage, if the config header wasn't included before.
This can help to make some code independent from qemu too.
gcc supports __BYTE_ORDER__ from about 4.6 and clang from 3.2.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
[ For the s390x parts I'm involved in ]
Acked-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220323155743.1585078-7-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
g_new(T, n) is neater than g_malloc(sizeof(T) * n). It's also safer,
for two reasons. One, it catches multiplication overflowing size_t.
Two, it returns T * rather than void *, which lets the compiler catch
more type errors.
This commit only touches allocations with size arguments of the form
sizeof(T).
Patch created mechanically with:
$ spatch --in-place --sp-file scripts/coccinelle/use-g_new-etc.cocci \
--macro-file scripts/cocci-macro-file.h FILES...
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20220315144156.1595462-4-armbru@redhat.com>
Reviewed-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
In the conversion to cpu_ld_*_mmu, the retaddr parameter
was corrupted in the one case of cpu_ldq_be_mmu.
Fixes: f83bcecb1 ("accel/tcg: Add cpu_{ld,st}*_mmu interfaces")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/902
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220315002506.152030-1-richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220305233415.64627-2-philippe.mathieu.daude@gmail.com>
Alex Bennée