The NBD specification defines NBD_FLAG_CAN_MULTI_CONN, which can be
advertised when the server promises cache consistency between
simultaneous clients (basically, rules that determine what FUA and
flush from one client are able to guarantee for reads from another
client). When we don't permit simultaneous clients (such as qemu-nbd
without -e), the bit makes no sense; and for writable images, we
probably have a lot more work before we can declare that actions from
one client are cache-consistent with actions from another. But for
read-only images, where flush isn't changing any data, we might as
well advertise multi-conn support. What's more, advertisement of the
bit makes it easier for clients to determine if 'qemu-nbd -e' was in
use, where a second connection will succeed rather than hang until the
first client goes away.
This patch affects qemu as server in advertising the bit. We may want
to consider patches to qemu as client to attempt parallel connections
for higher throughput by spreading the load over those connections
when a server advertises multi-conn, but for now sticking to one
connection per nbd:// BDS is okay.
See also: https://bugzilla.redhat.com/1708300
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190815185024.7010-1-eblake@redhat.com>
[eblake: tweak blockdev-nbd.c to not request shared when writable,
fix iotest 233]
Reviewed-by: John Snow <jsnow@redhat.com>
Bug fixes:
* Fix die-id validation regression (Eduardo Habkost)
* vmmouse: Properly reset state (Jan Kiszka)
* hostmem-file: fix pmem file size check (Stefan Hajnoczi)
* Keep query-hotpluggable-cpus output compatible with older QEMU
if '-smp dies' is not set (Igor Mammedov)
* migration: Do not re-read the clock on pre_save in case of paused guest
(Maxiwell S. Garcia)
Cleanups:
* NUMA code cleanups (Tao Xu)
* Remove stale externs from includes (Alex Bennée)
Features:
* qapi: report the default CPU type for each machine (Daniel P. Berrangé)
-----BEGIN PGP SIGNATURE-----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=u5HZ
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/ehabkost/tags/machine-next-pull-request' into staging
Machine + x86 queue, 2019-09-03
Bug fixes:
* Fix die-id validation regression (Eduardo Habkost)
* vmmouse: Properly reset state (Jan Kiszka)
* hostmem-file: fix pmem file size check (Stefan Hajnoczi)
* Keep query-hotpluggable-cpus output compatible with older QEMU
if '-smp dies' is not set (Igor Mammedov)
* migration: Do not re-read the clock on pre_save in case of paused guest
(Maxiwell S. Garcia)
Cleanups:
* NUMA code cleanups (Tao Xu)
* Remove stale externs from includes (Alex Bennée)
Features:
* qapi: report the default CPU type for each machine (Daniel P. Berrangé)
# gpg: Signature made Tue 03 Sep 2019 21:57:37 BST
# gpg: using RSA key 5A322FD5ABC4D3DBACCFD1AA2807936F984DC5A6
# gpg: issuer "ehabkost@redhat.com"
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>" [full]
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6
* remotes/ehabkost/tags/machine-next-pull-request:
migration: Do not re-read the clock on pre_save in case of paused guest
x86: do not advertise die-id in query-hotpluggbale-cpus if '-smp dies' is not set
i386/vmmouse: Properly reset state
hostmem-file: fix pmem file size check
qapi: report the default CPU type for each machine
pc: Don't make die-id mandatory unless necessary
pc: Improve error message when die-id is omitted
pc: Fix error message on die-id validation
numa: move numa global variable numa_info into MachineState
numa: move numa global variable have_numa_distance into MachineState
numa: move numa global variable nb_numa_nodes into MachineState
hw/arm: simplify arm_load_dtb
includes: remove stale [smp|max]_cpus externs
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
- qemu-io now accepts a file to read a write pattern from
- Ensure that raw files have their first block allocated so we can probe
the O_DIRECT alignment if necessary
- Various fixes
-----BEGIN PGP SIGNATURE-----
iQFGBAABCAAwFiEEkb62CjDbPohX0Rgp9AfbAGHVz0AFAl1uY5ESHG1yZWl0ekBy
ZWRoYXQuY29tAAoJEPQH2wBh1c9AWiQH/2EY0dgpvMGy6Qu7S+TtD+OfZ5P3OB7y
5N62Lv6N6QUIubCtG5QtBxUpKk7MIZlKV8RzOaItyC9IkMy8Pu2tggQx6xjU/Gr0
bAx8R28I8moyoCjmgbzwATNQ6kfqBR58tuWEfm+Ee0Ws2gGGlebx2lSFvVWoIZ5+
PnGojkn0y35n+2gF51L/GaP4DAjR25DiViROc+DVomqloK+lA8WTUCQAbrA4AiXD
KYFHH5wUvc4JHMKzOhnT6RolQXSgMa6sUB/ykWJii4ZXLFiRUx74Tkg3D+NUztvB
mExwMMy84lZBsq5plfAZTT42mU6ZzRvfLlYZuM6ujAiIHq2bD9Sb8Fk=
=/bzB
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/maxreitz/tags/pull-block-2019-09-03' into staging
Block patches:
- qemu-io now accepts a file to read a write pattern from
- Ensure that raw files have their first block allocated so we can probe
the O_DIRECT alignment if necessary
- Various fixes
# gpg: Signature made Tue 03 Sep 2019 13:58:57 BST
# gpg: using RSA key 91BEB60A30DB3E8857D11829F407DB0061D5CF40
# gpg: issuer "mreitz@redhat.com"
# gpg: Good signature from "Max Reitz <mreitz@redhat.com>" [full]
# Primary key fingerprint: 91BE B60A 30DB 3E88 57D1 1829 F407 DB00 61D5 CF40
* remotes/maxreitz/tags/pull-block-2019-09-03:
iotests: Unify cache mode quoting
tests/check-block: Skip iotests when sanitizers are enabled
iotests: Check for enabled drivers before testing them
iotests: Add -display none to the qemu options
file-posix: fix request_alignment typo
iotests: Disable 126 for flat vmdk subformats
iotests: Disable 110 for vmdk.twoGbMaxExtentSparse
iotests: Disable broken streamOptimized tests
vmdk: Reject invalid compressed writes
iotests: Keep testing broken relative extent paths
vmdk: Use bdrv_dirname() for relative extent paths
iotests: Fix _filter_img_create()
iotests: Test allocate_first_block() with O_DIRECT
block: posix: Always allocate the first block
block: fix permission update in bdrv_replace_node
qemu-io: add pattern file for write command
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Current parameter was always one. We continue with that value for now
in all callers.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
---
Moved trace to socket_listen
We have this issue reported when using libvirt to hotplug CPUs:
https://bugzilla.redhat.com/show_bug.cgi?id=1741451
Basically, libvirt is not copying die-id from
query-hotpluggable-cpus, but die-id is now mandatory.
We could blame libvirt and say it is not following the documented
interface, because we have this buried in the QAPI schema
documentation:
> Note: currently there are 5 properties that could be present
> but management should be prepared to pass through other
> properties with device_add command to allow for future
> interface extension. This also requires the filed names to be kept in
> sync with the properties passed to -device/device_add.
But I don't think this would be reasonable from us. We can just
make QEMU more flexible and let die-id to be omitted when there's
no ambiguity. This will allow us to keep compatibility with
existing libvirt versions.
Test case included to ensure we don't break this again.
Fixes: commit 176d2cda0d ("i386/cpu: Consolidate die-id validity in smp context")
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20190816170750.23910-1-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Another pull request for ppc-for-4.2. Includes
* Several powernv patches which were pulled last minute from the
last PULL, now that some problems with them have been sorted out
* A fix for -no-reboot which has been broken since the
pseries-rhel4.1.0 machine type
* Add some host threads information which AIX guests will need to
properly scale the PURR and SPURR
* Change behaviour to match x86 when unplugging function 0 of a
multifunction PCI device
* A number of TCG fixes in FPU emulation
And a handful of other assorted fixes and cleanups.
-----BEGIN PGP SIGNATURE-----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=sJgq
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-4.2-20190829' into staging
ppc patch queue 2018-08-29
Another pull request for ppc-for-4.2. Includes
* Several powernv patches which were pulled last minute from the
last PULL, now that some problems with them have been sorted out
* A fix for -no-reboot which has been broken since the
pseries-rhel4.1.0 machine type
* Add some host threads information which AIX guests will need to
properly scale the PURR and SPURR
* Change behaviour to match x86 when unplugging function 0 of a
multifunction PCI device
* A number of TCG fixes in FPU emulation
And a handful of other assorted fixes and cleanups.
# gpg: Signature made Thu 29 Aug 2019 06:36:23 BST
# gpg: using RSA key 75F46586AE61A66CC44E87DC6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" [full]
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" [full]
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" [full]
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>" [unknown]
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-4.2-20190829:
spapr: Set compat mode in spapr_core_plug()
spapr/pci: Convert types to QEMU coding style
spapr_pci: Advertise BAR reallocation capability
spapr: Use SHUTDOWN_CAUSE_SUBSYSTEM_RESET for CAS reboots
powerpc/spapr: Add host threads parameter to ibm,get_system_parameter
pseries: Update SLOF firmware image
target/ppc: Refactor emulation of vmrgew and vmrgow instructions
target/ppc: Fix do_float_check_status vs inexact
target/ppc: Set float_tininess_before_rounding at cpu reset
pseries: Fix compat_pvr on reset
spapr_pci: remove all child functions in function zero unplug
ppc: Fix xscvdpspn for SNAN
ppc: Fix xsmaddmdp and friends
tests/boot-serial-test: add support for all the PowerNV machines
ppc/pnv: Introduce PowerNV machines with fixed CPU models
ppc/pnv: Generate phandle for the "interrupt-parent" property
ppc/pnv: add more dummy XSCOM addresses for the P9 CAPP
ppc/pnv: update skiboot to v6.4
ppc/pnv: Set default ram size to 1.75GB
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----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=UzY/
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/cleber/tags/python-next-pull-request' into staging
Python (acceptance tests) queue, 2019-08-28
# gpg: Signature made Thu 29 Aug 2019 02:11:22 BST
# gpg: using RSA key 7ABB96EB8B46B94D5E0FE9BB657E8D33A5F209F3
# gpg: Good signature from "Cleber Rosa <crosa@redhat.com>" [marginal]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 7ABB 96EB 8B46 B94D 5E0F E9BB 657E 8D33 A5F2 09F3
* remotes/cleber/tags/python-next-pull-request:
VNC Acceptance test: simplify test names
Boot Linux Console Test: add a test for ppc64 + pseries
Acceptance tests: drop left over usage of "🥑 enable"
tests/requirements.txt: pin paramiko version requirement
tests.acceptance.avocado_qemu: Add support for powerpc
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Quoting cache mode is not needed, and most tests use unquoted values.
Unify all test to use the same style.
Message-id: 20190827173432.7656-1-nsoffer@redhat.com
Signed-off-by: Nir Soffer <nsoffer@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
The sanitizers (especially the address sanitizer from Clang) are
sometimes printing out warnings or false positives - this spoils
the output of the iotests, causing some of the tests to fail.
Thus let's skip the automatic iotests during "make check" when the
user configured QEMU with --enable-sanitizers.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-id: 20190823084203.29734-1-thuth@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
It is possible to enable only a subset of the block drivers with the
"--block-drv-rw-whitelist" option of the "configure" script. All other
drivers are marked as unusable (or only included as read-only with the
"--block-drv-ro-whitelist" option). If an iotest is now using such a
disabled block driver, it is failing - which is bad, since at least the
tests in the "auto" group should be able to deal with this situation.
Thus let's introduce a "_require_drivers" function that can be used by
the shell tests to check for the availability of certain drivers first,
and marks the test as "not run" if one of the drivers is missing.
This patch mainly targets the test in the "auto" group which should
never fail in such a case, but also improves some of the other tests
along the way. Note that we also assume that the "qcow2" and "file"
drivers are always available - otherwise it does not make sense to
run "make check-block" at all (which only tests with qcow2 by default).
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-id: 20190823133552.11680-1-thuth@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Without this argument, qemu will print an angry message about not being
able to connect to a display server if $DISPLAY is not set. For me,
that breaks iotests.supported_formats() because it thus only sees
["Could", "not", "connect"] as the supported formats.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190819201851.24418-2-mreitz@redhat.com
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
iotest 126 requires backing file support, which flat vmdks cannot offer.
Skip this test for such subformats.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190815153638.4600-8-mreitz@redhat.com
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
The error message for the test case where we have a quorum node for
which no directory name can be generated is different: For
twoGbMaxExtentSparse, it complains that it cannot open the extent file.
For other (sub)formats, it just notes that it cannot determine the
backing file path. Both are fine, but just disable twoGbMaxExtentSparse
for simplicity's sake.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20190815153638.4600-7-mreitz@redhat.com
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
streamOptimized does not support writes that do not span exactly one
cluster. Furthermore, it cannot rewrite already allocated clusters.
As such, many iotests do not work with it. Disable them.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190815153638.4600-6-mreitz@redhat.com
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
We had a test for a case where relative extent paths did not work, but
unfortunately we just fixed the underlying problem, so it works now.
This patch adds a new test case that still fails.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20190815153638.4600-4-mreitz@redhat.com
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
This makes iotest 033 pass with e.g. subformat=monolithicFlat. It also
turns a former error in 059 into success.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190815153638.4600-3-mreitz@redhat.com
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
fe646693ac changed qemu-img create's output so that it no longer prints
single quotes around parameter values. The subformat and adapter_type
filters in _filter_img_create() have never been adapted to that change.
Fixes: fe646693ac
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20190815153638.4600-2-mreitz@redhat.com
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Using block_resize we can test allocate_first_block() with file
descriptor opened with O_DIRECT, ensuring that it works for any size
larger than 4096 bytes.
Testing smaller sizes is tricky as the result depends on the filesystem
used for testing. For example on NFS any size will work since O_DIRECT
does not require any alignment.
Signed-off-by: Nir Soffer <nsoffer@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190827010528.8818-3-nsoffer@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
When creating an image with preallocation "off" or "falloc", the first
block of the image is typically not allocated. When using Gluster
storage backed by XFS filesystem, reading this block using direct I/O
succeeds regardless of request length, fooling alignment detection.
In this case we fallback to a safe value (4096) instead of the optimal
value (512), which may lead to unneeded data copying when aligning
requests. Allocating the first block avoids the fallback.
Since we allocate the first block even with preallocation=off, we no
longer create images with zero disk size:
$ ./qemu-img create -f raw test.raw 1g
Formatting 'test.raw', fmt=raw size=1073741824
$ ls -lhs test.raw
4.0K -rw-r--r--. 1 nsoffer nsoffer 1.0G Aug 16 23:48 test.raw
And converting the image requires additional cluster:
$ ./qemu-img measure -f raw -O qcow2 test.raw
required size: 458752
fully allocated size: 1074135040
When using format like vmdk with multiple files per image, we allocate
one block per file:
$ ./qemu-img create -f vmdk -o subformat=twoGbMaxExtentFlat test.vmdk 4g
Formatting 'test.vmdk', fmt=vmdk size=4294967296 compat6=off hwversion=undefined subformat=twoGbMaxExtentFlat
$ ls -lhs test*.vmdk
4.0K -rw-r--r--. 1 nsoffer nsoffer 2.0G Aug 27 03:23 test-f001.vmdk
4.0K -rw-r--r--. 1 nsoffer nsoffer 2.0G Aug 27 03:23 test-f002.vmdk
4.0K -rw-r--r--. 1 nsoffer nsoffer 353 Aug 27 03:23 test.vmdk
I did quick performance test for copying disks with qemu-img convert to
new raw target image to Gluster storage with sector size of 512 bytes:
for i in $(seq 10); do
rm -f dst.raw
sleep 10
time ./qemu-img convert -f raw -O raw -t none -T none src.raw dst.raw
done
Here is a table comparing the total time spent:
Type Before(s) After(s) Diff(%)
---------------------------------------
real 530.028 469.123 -11.4
user 17.204 10.768 -37.4
sys 17.881 7.011 -60.7
We can see very clear improvement in CPU usage.
Signed-off-by: Nir Soffer <nsoffer@redhat.com>
Message-id: 20190827010528.8818-2-nsoffer@redhat.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
The recent podman changes (9459f75413) imported enum which is part
of the python3 standard library but only available as an external
library for python2. This causes problems on the fairly restricted
environment such as shippable. Lets bite the bullet and make the
script a fully python3 one. To that end:
- drop the from __future__ import (we are there now ;-)
- avoid the StringIO import hack
- be consistent with the mode we read/write dockerfiles
- s/iteritems/items/
- ensure check_output returns strings for processing
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Cc: Marc-André Lureau <marcandre.lureau@redhat.com>
This reverts commit 45db1ac157 ("modules-test: ui-spice-app is not
built as module") and fixes commit d8aec9d9f1 ("display: add -display
spice-app launching a Spice client").
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20190827140241.20818-1-marcandre.lureau@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
The test name is composed of the class name and method name, so it
looks like there's some redundancy here that we can eliminate.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190607152223.9467-7-crosa@redhat.com>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Just like the previous tests, boots a Linux kernel on a ppc64 target
using the pseries machine.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
CC: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20190607152223.9467-5-crosa@redhat.com>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Commit 9531d26c10 removed all of "🥑 enable" tags, but then
a new entry was added with the introduction of migration.py.
Let's remove it for consistency.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190607152223.9467-4-crosa@redhat.com>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
It's a good practice (I'd really say a must) to pin as much as
possible of the software versions used during test, so let's apply
that to paramiko.
According to https://pypi.org/project/paramiko/, 2.4.2 is the latest
released version. It's also easily obtainable on systems such as
Fedora 30.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190607152223.9467-3-crosa@redhat.com>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Current acceptance test will not run properly in powerpc
environment due qemu target is different from arch, this
usually matches, except with bi-endian architectures like ppc64.
uname would return `ppc64` or `ppc64le` based `big` or `little`
endian but qemu `target` is always `ppc64`. Let's handle it.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com>
Message-Id: <20190819082820.14817-1-sathnaga@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Use the machine names specifiying the CPU type, POWER8 and POWER9.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20190731141233.1340-3-clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Make the current "powernv" machine an abstract type and derive from it
new machines with specific CPU models: power8 and power9.
The "powernv" machine is now an alias on the "powernv9" machine.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20190731141233.1340-2-clg@kaod.org>
[dwg: Adjust pnv-xscom-test to cope with this change]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The current approach to capture the Python version is fragile, as it
was demonstrated by a very specific build of Python 3 on Fedora 29
that, under non-interactive shells would print multiline version
information.
The (badly) stripped version output would be sent to config-host.mak,
producing bad syntax and rendering the makefiles unusable. Now, the
Python versions is printed by configure, but only a simple (and better
controlled variable) indicating whether the build system is using
Python 2 is kept on config-host.mak.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20190826155832.17427-1-crosa@redhat.com>
Reviewed-by: Tony Nguyen <tony.nguyen@bt.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
In commit f6e501a28e, Eduardo started to use "check_" as a
prefix for methods of similar purpose. Follow this prior art,
since it might become the conventions when writting Avocado
tests.
Suggested-by: Cleber Rosa <crosa@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190607174953.22342-1-philmd@redhat.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
This reverts commit 45db1ac157 ("modules-test: ui-spice-app is not
built as module") and fixes commit d8aec9d9f1 ("display: add -display
spice-app launching a Spice client").
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20190827140241.20818-1-marcandre.lureau@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
$(call land, $(CONFIG_SPICE), $(CONFIG_GIO)) will never return "m" so
ui-spice-app is always linked into QEMU.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Miroslav Rezanina <mrezanin@redhat.com>
Message-id: 1566495734-23297-2-git-send-email-pbonzini@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add a missing cast; this fixes a build failure with --enable-modules.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Miroslav Rezanina <mrezanin@redhat.com>
Message-id: 1566495734-23297-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Skip the tests if socket_check_protocol_support() failed, but do run
g_test_run() to keep TAP harness happy.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
getaddrinfo() may succeed with PF_UNSPEC, but fail when more specific.
(this allows to skip some tests that would fail under podman)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Allow to specify the container engine to run with ENGINE variable.
By default, ENGINE=auto and will select either podman or docker.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Add a --engine option to select either docker, podman or auto.
Among other advantages, podman allows to run rootless & daemonless
containers, fortunately sharing compatible CLI with docker.
With current podman, we have to use a uidmap trick in order to be able
to rw-share the ccache directory with the container user.
With a user 1000, the default mapping is: 1000 (host) -> 0 (container).
So write access to /var/tmp/ccache ends will end with permission
denied error.
With "--uidmap 1000:0:1 --uidmap 0:1:1000", the mapping is:
1000 (host) -> 0 (container, 1st namespace) -> 1000 (container, 2nd namespace).
(the rest is mumbo jumbo to avoid holes in the range of UIDs)
A future podman version may have an option such as --userns-keep-uid.
Thanks to Debarshi Ray <rishi@redhat.com> for the help!
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
(podman will need further tweaks)
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This test will simply check that modules can be loaded, and no symbols
are missing.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Due to memory management rules. See HACKING.
Signed-off-by: Tony Nguyen <tony.nguyen@bt.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <dce313b46d294ada8826d34609a3447e@tpw09926dag18e.domain1.systemhost.net>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Eric Blake