Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
"number of vrings" doesn't help me understand the purpose of this
message. My understanding is that it is rather the size of the queue (in
modern terms).
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
VIRTIO_INPUT_CFG_ABS_INFO was not implemented for pass-through input
devices. This patch follows the existing design and pre-fetches the
config for all absolute axes using EVIOCGABS at realize time.
Signed-off-by: Ladi Prosek <lprosek@redhat.com>
Message-id: 1460558603-18331-1-git-send-email-lprosek@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Read absolute and relative axis information, only classify
devices as mouse/tablet in case the x axis is present.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The reported maximum was wrong. The X and Y coordinates are 0-based
so if size is 8000 maximum must be 7FFF.
Signed-off-by: Ladi Prosek <lprosek@redhat.com>
Message-id: 1460128893-10244-1-git-send-email-lprosek@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
virtio-input is simple enough that it doesn't need to xfer any state.
Still we have to wire up savevm manually, so the generic pci and virtio
are saved correctly.
Additionally we need to do some post-load processing to figure whenever
the guest uses the device or not, so we can give input routing hints to
the qemu input layer using qemu_input_handler_{activate,deactivate}.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1459859501-16965-1-git-send-email-kraxel@redhat.com
The write path for pass-through devices, commonly used for controlling
keyboard LEDs via EV_LED, was not implemented. This commit adds the
necessary plumbing to connect the status virtio queue to the host evdev
file descriptor.
Signed-off-by: Ladi Prosek <lprosek@redhat.com>
Message-id: 1459511146-12060-1-git-send-email-lprosek@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
VIRTIO_INPUT_CFG_EV_BITS with subsel of EV_LED was always
returning an empty bitmap for pass-through input devices.
Signed-off-by: Ladi Prosek <lprosek@redhat.com>
Message-id: 1459418028-7473-1-git-send-email-lprosek@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
KEY_PAUSE is flat out missing. KEY_SYSRQ already has a keycode
assigned but it's not what I'm seeing on my system. The mapping
doesn't appear to have to be unique so both keycodes now map to
KEY_SYSRQ which is what the "Keyboard PrintScreen", HID usage ID
0x46, translates to.
Signed-off-by: Ladi Prosek <lprosek@redhat.com>
Message-id: 1459343240-19483-1-git-send-email-lprosek@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
"_x" must be "(_x)" otherwise things fail if you pass in expressions.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1460440299-26654-1-git-send-email-kraxel@redhat.com
"qemu -device ivshmem-{plain,doorbell}" will crash, because the device
doesn't check that the required argument is provided. (screwed up in
commit 5400c02)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Restart of ATAPI DMA used to be unreachable, because the request to do
so wasn't indicated in bus->error_status due to the lack of spare bits, and
ide_restart_bh() would return early doing nothing.
This patch makes use of the observation that not all bit combinations were
possible in ->error_status. In particular, IDE_RETRY_READ only made sense
together with IDE_RETRY_DMA or IDE_RETRY_PIO. This allows to re-use
IDE_RETRY_READ alone as an indicator of ATAPI DMA restart request.
To makes things more uniform, ATAPI DMA gets its own value for ->dma_cmd.
As a means against confusion, macros are added to test the state of
->error_status.
The patch fixes the restart of both in-flight and pending ATAPI DMA,
following the scheme similar to that of IDE DMA.
[Including a fixup patch:
Message-id: 1460465594-15777-1-git-send-email-pbutsykin@virtuozzo.com
--js]
Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Roman Kagan <rkagan@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 1459924806-306-4-git-send-email-den@openvz.org
Signed-off-by: John Snow <jsnow@redhat.com>
ide_atapi_dma_restart() used to just complete the DMA with an error,
under the assumption that there isn't enough information to restart it.
However, as the contents of the ->io_buffer is preserved, it looks safe to
just re-evaluate it and dispatch the ATAPI command again.
Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com>
Reviewed-by: Roman Kagan <rkagan@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 1459924806-306-3-git-send-email-den@openvz.org
Signed-off-by: John Snow <jsnow@redhat.com>
If the migration occurs after the IDE DMA has been set up but before it
has been initiated, the state gets lost upon save/restore. Specifically,
->dma_cb callback gets cleared, so, when the guest eventually starts bus
mastering, the DMA never completes, causing the guest to time out the
operation.
OTOH all the infrastructure is already in place to restart the DMA if
the migration happens while the DMA is in progress.
So reuse that infrastructure, by setting bus->error_status based on
->dma_cmd in pre_save if ->dma_cb callback is already set but DMAING is
clear. This will indicate the need for restart and make sure ->dma_cb
is restored in ide_restart_bh(); howeover since DMAING is clear the state
upon restore will be exactly "ready for DMA" as before the save.
Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com>
Reviewed-by: Roman Kagan <rkagan@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 1459924806-306-2-git-send-email-den@openvz.org
Signed-off-by: John Snow <jsnow@redhat.com>
After commit e5e7855 (blockdev: Separate BB name management), starting a
guest with PVHVM support result in this assert:
qemu-system-i386: block/block-backend.c:173: blk_delete: Assertion `!blk->name' failed.
A backtrace show that a caller is pci_piix3_xen_ide_unplug().
This patch fix it.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Message-id: 1460382666-29885-1-git-send-email-anthony.perard@citrix.com
Signed-off-by: John Snow <jsnow@redhat.com>
In commit ac0487e1 ("xenfb.c: avoid expensive loops when prod <=
out_cons"), ">=" was used. In fact, a full ring is a legit state.
Correct the test to use ">".
Reported-by: "Hao, Xudong" <xudong.hao@intel.com>
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Tested-by: "Hao, Xudong" <xudong.hao@intel.com>
Acked-by: Anthony Perard <anthony.perard@citrix.com>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=UMTj
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches for 2.6
# gpg: Signature made Tue 12 Apr 2016 17:10:29 BST using RSA key ID C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
* remotes/kevin/tags/for-upstream:
qemu-iotests: iotests.py: get rid of __all__
qemu-iotests: 068: don't require KVM
qemu-iotests: 148: properly skip test if quorum support is missing
qemu-iotests: iotests.VM: remove qtest socket on error
qemu-iotests: fix 051 on non-PC architectures
qemu-iotests: check: don't place files with predictable names in /tmp
MAINTAINERS: Block layer core, qcow2 and blkdebug
qcow2: Prevent backing file names longer than 1023
vpc: fix return value check for blk_pwrite
iotests: Make 150 use qemu-img map instead of du
block: initialize qcrypto API at startup
qemu-img: fix formatting of error message
iotests: fix the broken 026.nocache output
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJXDR10AAoJEDuxQgLoOKyt8AkH/jSZYxLCUEBZRJPEaOl5JyfV
qxNzWHlfkKHP6zC1PQHt9mCYAsMmAzz7v3+zr/tQbOOlDoUJsROe8RqSvrlDpHPG
WeuSpWZx0xcSq9FNChp3VvJiM/Hb22Fu0a8GODKH9GnnRvfgRdPuXL0bh7RpdxN8
kcdfdBSAAhBTJI1+q+smJxexelx+UDYFcg6CPX0AKET7I79bNg/ZLvosYcYUezuh
Tur6V7OCqY1AFhu0oGc1p3Wtf0jBFPPkXylqx6jWhJIW7kWwDho6nh0zhnQjDufi
KXp560/bcpK0zdan6kTlp5gyo6Ym8hF1sPYNjIelf5T8+z4P5pS2ysaCOlhrGgM=
=DmtA
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'mreitz/tags/pull-block-for-kevin-2016-04-12' into queue-block
Block patches for 2.6-rc2.
# gpg: Signature made Tue Apr 12 18:08:20 2016 CEST using RSA key ID E838ACAD
# gpg: Good signature from "Max Reitz <mreitz@redhat.com>"
* mreitz/tags/pull-block-for-kevin-2016-04-12:
qemu-iotests: iotests.py: get rid of __all__
qemu-iotests: 068: don't require KVM
qemu-iotests: 148: properly skip test if quorum support is missing
qemu-iotests: iotests.VM: remove qtest socket on error
qemu-iotests: fix 051 on non-PC architectures
qemu-iotests: check: don't place files with predictable names in /tmp
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The __all__ list contained a typo for as long as the iotests module
existed. That typo prevented "from iotests import *" (which is the
only case where iotests.__all__ is used at all) from ever working.
The names used by iotests are highly prone to name collisions, so
importing them all unconditionally is a bad idea anyway. Since __all__
is not adding any value, let's just get rid of it.
Fixes: f345cfd0 ("qemu-iotests: add iotests Python module")
Signed-off-by: Sascha Silbe <silbe@linux.vnet.ibm.com>
Reviewed-by: Bo Tu <tubo@linux.vnet.ibm.com>
Message-id: 1459848109-29756-8-git-send-email-silbe@linux.vnet.ibm.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
None of the other test cases explicitly enable KVM and there's no
obvious reason for 068 to require it. Drop this so all test cases can be
executed in environments where KVM is not available (e.g. because the
user doesn't have sufficient permissions to access /dev/kvm).
Signed-off-by: Sascha Silbe <silbe@linux.vnet.ibm.com>
Reviewed-by: Bo Tu <tubo@linux.vnet.ibm.com>
Message-id: 1459848109-29756-6-git-send-email-silbe@linux.vnet.ibm.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
qemu-iotests test case 148 already had some code for skipping the test
if quorum support is missing, but it didn't work in all
cases. TestQuorumEvents.setUp() gets run before the actual test class
(which contains the skipping code) and tries to start qemu with a drive
using the quorum driver. For some reason this works fine when using
qcow2, but fails for raw.
As the entire test case requires quorum, just check for availability
before even starting the test suite. Introduce a verify_quorum()
function in iotests.py for this purpose so future test cases can make
use of it.
Signed-off-by: Sascha Silbe <silbe@linux.vnet.ibm.com>
Reviewed-by: Bo Tu <tubo@linux.vnet.ibm.com>
Message-id: 1459848109-29756-5-git-send-email-silbe@linux.vnet.ibm.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
On error, VM.launch() cleaned up the monitor unix socket, but left the
qtest unix socket behind. This caused the remaining sub-tests to fail
with EADDRINUSE:
+======================================================================
+ERROR: testQuorum (__main__.TestFifoQuorumEvents)
+----------------------------------------------------------------------
+Traceback (most recent call last):
+ File "148", line 63, in setUp
+ self.vm.launch()
+ File "/home6/silbe/qemu/tests/qemu-iotests/iotests.py", line 247, in launch
+ self._qmp.accept()
+ File "/home6/silbe/qemu/tests/qemu-iotests/../../scripts/qmp/qmp.py", line 141, in accept
+ return self.__negotiate_capabilities()
+ File "/home6/silbe/qemu/tests/qemu-iotests/../../scripts/qmp/qmp.py", line 57, in __negotiate_capabilities
+ raise QMPConnectError
+QMPConnectError
+
+======================================================================
+ERROR: testQuorum (__main__.TestQuorumEvents)
+----------------------------------------------------------------------
+Traceback (most recent call last):
+ File "148", line 63, in setUp
+ self.vm.launch()
+ File "/home6/silbe/qemu/tests/qemu-iotests/iotests.py", line 244, in launch
+ self._qtest = qtest.QEMUQtestProtocol(self._qtest_path, server=True)
+ File "/home6/silbe/qemu/tests/qemu-iotests/../../scripts/qtest.py", line 33, in __init__
+ self._sock.bind(self._address)
+ File "/usr/lib64/python2.7/socket.py", line 224, in meth
+ return getattr(self._sock,name)(*args)
+error: [Errno 98] Address already in use
Fix this by cleaning up both the monitor socket and the qtest socket iff
they exist.
Signed-off-by: Sascha Silbe <silbe@linux.vnet.ibm.com>
Reviewed-by: Bo Tu <tubo@linux.vnet.ibm.com>
Message-id: 1459848109-29756-4-git-send-email-silbe@linux.vnet.ibm.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Commit 61de4c68 [block: Remove BDRV_O_CACHE_WB] updated the reference
output for PCs, but neglected to do the same for the generic reference
output file. Fix 051 on all non-PC architectures by applying the same
change to the generic output file.
Fixes: 61de4c68 ("block: Remove BDRV_O_CACHE_WB")
Signed-off-by: Sascha Silbe <silbe@linux.vnet.ibm.com>
Reviewed-by: Bo Tu <tubo@linux.vnet.ibm.com>
Message-id: 1459848109-29756-3-git-send-email-silbe@linux.vnet.ibm.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Placing files with predictable or even hard-coded names in /tmp is a
security risk and can prevent or disturb operation on a multi-user
machine. Place them inside the "scratch" directory instead, as we
already do for most other test-related files.
Signed-off-by: Sascha Silbe <silbe@linux.vnet.ibm.com>
Reviewed-by: Bo Tu <tubo@linux.vnet.ibm.com>
Message-id: 1459848109-29756-2-git-send-email-silbe@linux.vnet.ibm.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
As agreed with Kevin and already practiced for a while, I am adding
myself as co-maintainer of the block layer core, qcow2 and blkdebug.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We reject backing file names with a length of more than 1023 characters
when opening a qcow2 file, so we should not produce such files
ourselves.
Cc: qemu-stable@nongnu.org
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
bdrv_pwrite_sync used to return zero or negative error, while blk_pwrite returns
the number of written bytes when successful. This caused VPC image creation
to fail spectacularly: it wrote the first 512 bytes, and then exited immediately
because of the non-zero answer from blk_pwrite. But the truly spectacular part
is that it returns a positive value (the 512 that blk_pwrite returned) causing
everyone to believe that it succeeded.
This fixes qemu-iotests with vpc format.
Fixes: b8f45cdf78
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The actual on-disk size of a file does not only depend on factors qemu
can control. Thus, we should not depend on this to determine whether a
file has indeed been fully allocated. Instead, use qemu-img map and hope
that if an area is referenced, it is indeed allocated, too.
Also, limit the supported image formats to raw and qcow2 because the
actual qemu-img map output may depend on the image format.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Tested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Any programs which call the qcrypto APIs should ensure that
qcrypto_init() has been called before anything else which
can use crypto. Essentially this means right at the start
of the main method before initializing anything else.
This is important because some versions of gnutls/gcrypt
require explicit initialization before use.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Alex Bligh <alex@alex.org.uk>
Tested-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The error_reportf_err() will not automatically append a
': ' before adding its suffix, so we must include that
in the message we pass it, otherwise we get a badly
formatted message lacking whitespace:
qemu-img: Could not open 'driver=nbd,host=127.0.0.1,port=6666,tls-creds=tls0'Failed to connect socket: Connection refused
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch fixes longstanding issue with 026 iotest. Unfortunately,
this test contains 2 versions of the correct output, one for cached
writes and one for non-cached ones. People tends to fix only one
version of output of the test and thus noncached version becomes
broken. Unfortunately, it is default in tests/check-block.sh
The following problematic commits were made:
commit 3b5e14c76a
Author: Max Reitz <mreitz@redhat.com>
Date: Tue Dec 2 18:32:51 2014 +0100
qcow2: Flushing the caches in qcow2_close may fail
commit a069e2f137
Author: John Snow <jsnow@redhat.com>
Date: Fri Feb 6 16:26:17 2015 -0500
blkdebug: fix "once" rule
commit b106ad9185
Author: Kevin Wolf <kwolf@redhat.com>
Date: Fri Mar 28 18:06:31 2014 +0100
qcow2: Don't rely on free_cluster_index in alloc_refcount_block()
Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Max Reitz <mreitz@redhat.com>
CC: John Snow <jsnow@redhat.com>
CC: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
As agreed with Stefan, I'm listing myself a co-maintainer of block I/O
path and assist with the maintainership.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 1459849105-7767-1-git-send-email-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Using the nested aio_poll() in coroutine is a bad idea. This patch
replaces the aio_poll loop in bdrv_drain with a BH, if called in
coroutine.
For example, the bdrv_drain() in mirror.c can hang when a guest issued
request is pending on it in qemu_co_mutex_lock().
Mirror coroutine in this case has just finished a request, and the block
job is about to complete. It calls bdrv_drain() which waits for the
other coroutine to complete. The other coroutine is a scsi-disk request.
The deadlock happens when the latter is in turn pending on the former to
yield/terminate, in qemu_co_mutex_lock(). The state flow is as below
(assuming a qcow2 image):
mirror coroutine scsi-disk coroutine
-------------------------------------------------------------
do last write
qcow2:qemu_co_mutex_lock()
...
scsi disk read
tracked request begin
qcow2:qemu_co_mutex_lock.enter
qcow2:qemu_co_mutex_unlock()
bdrv_drain
while (has tracked request)
aio_poll()
In the scsi-disk coroutine, the qemu_co_mutex_lock() will never return
because the mirror coroutine is blocked in the aio_poll(blocking=true).
With this patch, the added qemu_coroutine_yield() allows the scsi-disk
coroutine to make progress as expected:
mirror coroutine scsi-disk coroutine
-------------------------------------------------------------
do last write
qcow2:qemu_co_mutex_lock()
...
scsi disk read
tracked request begin
qcow2:qemu_co_mutex_lock.enter
qcow2:qemu_co_mutex_unlock()
bdrv_drain.enter
> schedule BH
> qemu_coroutine_yield()
> qcow2:qemu_co_mutex_lock.return
> ...
tracked request end
...
(resumed from BH callback)
bdrv_drain.return
...
Reported-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 1459855253-5378-2-git-send-email-famz@redhat.com
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
ldstub [addr], reg incorrectly reads a signed byte from memory which causes
problems in the 32-bit Solaris mutex code. Here the byte value being read is
0xff which is incorrectly sign-extended to 0xffffffff before being written back
to the target register causing lock detection to behave incorrectly.
This fixes the intermittent hangs and MUTEX_HELD warnings issued to the
console when running 32-bit Solaris images under qemu-system-sparc.
With thanks to Joseph Dery for providing a condensed test image to consistently
reproduce the problem on demand, and Martin Husemann for allowing me access to
real hardware for comparison.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-By: Artyom Tarasenko <atar4qemu@gmail.com>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
When receiving packets over Stellaris ethernet controller, it
uses receive buffer of size 2048 bytes. In case the controller
accepts large(MTU) packets, it could lead to memory corruption.
Add check to avoid it.
Reported-by: Oleksandr Bazhaniuk <oleksandr.bazhaniuk@intel.com>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Message-id: 1460095428-22698-1-git-send-email-ppandit@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Feeling a bit nervous putting the full live migration support
patch (https://patchwork.ozlabs.org/patch/606902/) in that
late in the 2.6 devel cycle as it carries some non-trivial
changes. So disable migration in case virtio-gpu is present
for now.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add a the new qemu_create_displaysurface_pixman function, to create
a DisplaySurface backed by an existing pixman image. In that case
there is no need to create a new pixman image pointing to the same
backing storage. We can just use the existing image directly.
This does not only simplify things a bit, but most importantly it
gets the reference counting right, so the backing storage for the
pixman image wouldn't be released underneath us.
Use new function in virtio-gpu, where using it actually fixes
use-after-free crashes.
Cc: qemu-stable@nongnu.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1459499240-742-1-git-send-email-kraxel@redhat.com
Fixes all over the place. Most notably, fixes migration
for systems with pci express bridges, and random crashes
observed with virtio blk and scsi dataplane.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJXB2OKAAoJECgfDbjSjVRpcfkH/jRxiCmaC2hArYS+xK1HXJuf
FUuI6JpbrvcuxdoNNm3E3BLM+vweYJ2JsVfY47l7zFcQVnBCmdRw4JMUetpqvt5C
ekEwuokvWcSwdCT6y3mUW3euZ5iBoiFxYAvjwtM4p2Aut6urZUA3oeBSsSikGWJj
itKsdeaaGN5bzC7BJYROUIs8VuK4VfIPpRBGF20smfMjXZq2liOnW7NK5mQ8BClg
klXfLnZ39IdR+MQ37J1uo9TgY/HcdOGRK1KYezq+6nsO4jlAfGrDr99+D9bsheLJ
G1jZLDEa+oTjfoCvqVkCK3+8O2vvHQe2BeR9sCEipYY9401gQPCqq4fmhv8/+O0=
=U4yU
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pci, virtio, acpi: fixes for 2.6
Fixes all over the place. Most notably, fixes migration
for systems with pci express bridges, and random crashes
observed with virtio blk and scsi dataplane.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Fri 08 Apr 2016 08:53:46 BST using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
* remotes/mst/tags/for_upstream:
hw/pci-bridge: Add missing unref in case register-bus fails
virtio: merge virtio_queue_aio_set_host_notifier_handler with virtio_queue_set_aio
virtio-scsi: use aio handler for data plane
virtio-blk: use aio handler for data plane
virtio: add aio handler
virtio-scsi: fix disabled mode
virtio-blk: fix disabled mode
virtio: make virtio_queue_notify_vq static
tests/bios-tables-test: fix assert
virtio-balloon: reset the statistic timer to load device
Migration: Add i82801b11 migration data
Sort the fw_cfg file list
xen: piix reuse pci generic class init function
pci-testdev: fast mmio support
acpi: Add missing GCC_FMT_ATTR
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Just a single bugfix for spapr in this batch, but I want to make sure
it gets in for 2.6.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=4ZAr
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-2.6-20160408' into staging
ppc patch queue for 2016-04-08
Just a single bugfix for spapr in this batch, but I want to make sure
it gets in for 2.6.
# gpg: Signature made Fri 08 Apr 2016 06:02:45 BST using RSA key ID 20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-2.6-20160408:
spapr: Fix ibm,lrdr-capacity
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* Debug code bitrot from Emilio
* HPET fix from Bill
* ps2kbd fix from Hervé
* PKU fix from myself
* Coverity fixes from Gonglei
* More memory.txt update from Jiangang
* .gitignore maintenance from Changlong
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJXBtpMAAoJEL/70l94x66Dz18H/im1nR9+DII3V4Ch2DOA/xaL
gCDHOr+KOXnzLcKQytfBCRjVsXZKnd2kayxtDrFc6ebCh7+Uar5+Z21P0wzCry5a
Z/LohJXg7rdHCNaF+9yW7uVbvDjuaepnS1fO9PaMnLviLjqxbIhZixYvuYRPwXD7
oFp88+cbgONIFTe7riXaVGBjjjsyTV8DyXyyS7zlBsuaTihfSYDuYy8upgrCk3Af
k9P/VqHxoNpnR1dMPVJdjyN6UQwWYB6i1g4GOEFessRu3H7wz0zCtzUuFL8dGIEs
3VZ7pQ/1QCPr5zaMn7EXofusxeZhU+gZwDnp/bsgGSI73MnMZkTB4Ws8CPf6AXA=
=1rhX
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
* NBD fixes from Alex and Eric
* Debug code bitrot from Emilio
* HPET fix from Bill
* ps2kbd fix from Hervé
* PKU fix from myself
* Coverity fixes from Gonglei
* More memory.txt update from Jiangang
* .gitignore maintenance from Changlong
# gpg: Signature made Thu 07 Apr 2016 23:08:12 BST using RSA key ID 78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
* remotes/bonzini/tags/for-upstream:
target-i386: check for PKU even for non-writable pages
tests: ignore test-logging
translate-all: add missing fold of tb_ctx into tcg_ctx
hostmem-file: fix memory leak
spapr: fix possible Negative array index read
nbd: do not hang nbd_wr_syncv if outside a coroutine and no available data
nbd: Don't kill server when client requests unknown option
nbd: Fix NBD unsupported options
qemu-nbd: Document -x option
nbd: Improve debug traces on little-endian
nbd: Avoid bitrot in TRACE() usage
nbd: Return correct error for write to read-only export
docs: fix typo in memory.txt
hw/timer: Revert "hpet: inverse polarity when pin above ISA_NUM_IRQS"
ps2kbd: default to scancode_set 2, as with KBD_CMD_RESET
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Marc-André Lureau