Switch VNC server over to using the QCryptoTLSSession object
for the TLS session. This removes the direct use of gnutls
from the VNC server code. It also removes most knowledge
about TLS certificate handling from the VNC server code.
This has the nice effect that all the CONFIG_VNC_TLS
conditionals go away and the user gets an actual error
message when requesting TLS instead of it being silently
ignored.
With this change, the existing configuration options for
enabling TLS with -vnc are deprecated.
Old syntax for anon-DH credentials:
-vnc hostname:0,tls
New syntax:
-object tls-creds-anon,id=tls0,endpoint=server \
-vnc hostname:0,tls-creds=tls0
Old syntax for x509 credentials, no client certs:
-vnc hostname:0,tls,x509=/path/to/certs
New syntax:
-object tls-creds-x509,id=tls0,dir=/path/to/certs,endpoint=server,verify-peer=no \
-vnc hostname:0,tls-creds=tls0
Old syntax for x509 credentials, requiring client certs:
-vnc hostname:0,tls,x509verify=/path/to/certs
New syntax:
-object tls-creds-x509,id=tls0,dir=/path/to/certs,endpoint=server,verify-peer=yes \
-vnc hostname:0,tls-creds=tls0
This aligns VNC with the way TLS credentials are to be
configured in the future for chardev, nbd and migration
backends. It also has the benefit that the same TLS
credentials can be shared across multiple VNC server
instances, if desired.
If someone uses the deprecated syntax, it will internally
result in the creation of a 'tls-creds' object with an ID
based on the VNC server ID. This allows backwards compat
with the CLI syntax, while still deleting all the original
TLS code from the VNC server.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Various VNC server I/O functions return 'long' and then
also pass this to a method accepting 'int'. All these
should be ssize_t to match the signature of read/write
APIs and thus avoid potential for integer truncation /
wraparound.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The _cmp_bytes variable added by commit "bea60dd ui/vnc: fix potential
memory corruption issues" can become negative. Result is (possibly
exploitable) memory corruption. Reason for that is it uses the stride
instead of bytes per scanline to apply limits.
For the server surface is is actually fine. vnc creates that itself,
there is never any padding and thus scanline length always equals stride.
For the guest surface scanline length and stride are typically identical
too, but it doesn't has to be that way. So add and use a new variable
(guest_ll) for the guest scanline length. Also rename min_stride to
line_bytes to make more clear what it actually is. Finally sprinkle
in an assert() to make sure we never use a negative _cmp_bytes again.
Reported-by: 范祚至(库特) <zuozhi.fzz@alibaba-inc.com>
Reviewed-by: P J P <ppandit@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
If vnc's password is configured, it will leak memory
which cipher variable pointed on every vnc connection.
Cc: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Message-Id: <1437556133-11268-1-git-send-email-arei.gonglei@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit 800567a61 updated the code to the generic crypto API
and mixed up encrypt and decrypt functions in
procotol_client_auth_vnc.
(Used to be: deskey(key, EN0) which encrypts, and was
changed to qcrypto_cipher_decrypt in 800567a61.)
Changed it to qcrypto_cipher_encrypt now.
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Switch the VNC server over to use the generic cipher API, this
allows it to use the pluggable DES implementations, instead of
being hardcoded to use QEMU's built-in impl.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1435770638-25715-11-git-send-email-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Remove the direct use of gnutls for hash processing in the
websockets code, in favour of using the crypto APIs. This
allows the websockets code to be built unconditionally
removing countless conditional checks from the VNC code.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1435770638-25715-9-git-send-email-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
To prepare for a generic internal cipher API, move the
built-in D3DES implementation into the crypto/ directory.
This is not in fact a normal D3DES implementation, it is
D3DES with double & triple length modes removed, and the
key bytes in reversed bit order. IOW it is crippled
specifically for the "benefit" of RFB, so call the new
files desrfb.c instead of d3des.c to make it clear that
it isn't a generally useful impl.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1435770638-25715-4-git-send-email-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In particular, don't include it into headers.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
These macros expand into error class enumeration constant, comma,
string. Unclean. Has been that way since commit 13f59ae.
The error class is always ERROR_CLASS_GENERIC_ERROR since the previous
commit.
Clean up as follows:
* Prepend every use of a QERR_ macro by ERROR_CLASS_GENERIC_ERROR, and
delete it from the QERR_ macro. No change after preprocessing.
* Rewrite error_set(ERROR_CLASS_GENERIC_ERROR, ...) into
error_setg(...). Again, no change after preprocessing.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
qerror_report_err() is a transitional interface to help with
converting existing monitor commands to QMP. It should not be used
elsewhere.
The only remaining user in qemu-option.c is qemu_opts_parse(). Is it
used in QMP context? If not, we can simply replace
qerror_report_err() by error_report_err().
The uses in qemu-img.c, qemu-io.c, qemu-nbd.c and under tests/ are
clearly not in QMP context.
The uses in vl.c aren't either, because the only QMP command handlers
there are qmp_query_status() and qmp_query_machines(), and they don't
call it.
Remaining uses:
* drive_def(): Command line -drive and such, HMP drive_add and pci_add
* hmp_chardev_add(): HMP chardev-add
* monitor_parse_command(): HMP core
* tmp_config_parse(): Command line -tpmdev
* net_host_device_add(): HMP host_net_add
* net_client_parse(): Command line -net and -netdev
* qemu_global_option(): Command line -global
* vnc_parse_func(): Command line -display, -vnc, default display, HMP
change, QMP change. Bummer.
* qemu_pci_hot_add_nic(): HMP pci_add
* usb_net_init(): Command line -usbdevice, HMP usb_add
Propagate errors through qemu_opts_parse(). Create a convenience
function qemu_opts_parse_noisily() that passes errors to
error_report_err(). Switch all non-QMP users outside tests to it.
That leaves vnc_parse_func(). Propagate errors through it. Since I'm
touching it anyway, rename it to vnc_parse().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Retain the function value for now, to permit selective conversion of
its callers.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Before:
qemu-system-x86_64: -display vnc=unix:/root/foo.sock: Failed to start VNC server on `(null)': Failed to bind socket to /root/foo.sock: Permission denied
After:
qemu-system-x86_64: -display vnc=unix:/root/foo.sock: Failed to start VNC server: Failed to bind socket to /root/foo.sock: Permission denied
Rather than tweak the string possibly show unix: value as well,
just drop the explicit display reporting. We already get the cli
string in the error message, that should be sufficient.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The qemu_acl_init() function has long since stopped being able
to return NULL, since g_malloc will abort on OOM. As such the
checks for NULL were unreachable code.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Commit v2.2.0-1530-ge556032 vnc: switch to inet_listen_opts
bypassed the use of inet_parse in inet_listen, making literal
IPv6 addresses enclosed in brackets fail:
qemu-kvm: -vnc [::1]:0: Failed to start VNC server on `(null)': address
resolution failed for [::1]:5900: Name or service not known
Strip the brackets to make it work again.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The previous change to the auth scheme handling guarantees we
can never have nested TLS sessions in the VNC websockets server.
Thus we can remove the separate gnutls_session instance.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
When TLS is required, the primary VNC server considers it to be
mandatory. ie the server admin decides whether or not TLS is used,
and the client has to comply with this decision. The websockets
server, however, treated it as optional, allowing non-TLS clients
to connect to a server which had setup TLS. Thus enabling websockets
lowers the security of the VNC server leaving the admin no way to
enforce use of TLS.
This removes the code that allows non-TLS fallback in the websockets
server, so that if TLS is requested for VNC it is now mandatory for
both the primary VNC server and the websockets VNC server.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The way the websockets TLS code was integrated into the VNC server
made it essentially useless. The only time that the websockets TLS
support could be used is if the primary VNC server had its existing
TLS support disabled. ie QEMU had to be launched with:
# qemu -vnc localhost:1,websockets=5902,x509=/path/to/certs
Note the absence of the 'tls' flag. This is already a bug, because
the docs indicate that 'x509' is ignored unless 'tls' is given.
If the primary VNC server had TLS turned on via the 'tls' flag,
then this prevented the websockets TLS support from being used,
because it activates the VeNCrypt auth which would have resulted
in TLS being run over a TLS session. Of course no websockets VNC
client supported VeNCrypt so in practice, since the browser clients
cannot setup a nested TLS session over the main HTTPS connection,
so it would not even get past auth.
This patch causes us to decide our auth scheme separately for the
main VNC server vs the websockets VNC server. We take account of
the fact that if TLS is enabled, then the websockets client will
use https, so setting up VeNCrypt is thus redundant as it would
lead to nested TLS sessions.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The vnc_display_open method is quite long and complex, so
move the VNC auth scheme decision logic into a separate
method for clarity.
Also update the comment to better describe what we are
trying to achieve.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
If the VNC server is built without tls, sasl or websocket support
and the user requests one of these features, they are just silently
ignored. This is bad because it means the VNC server ends up running
in a configuration that is less secure than the user asked for.
It also leads to an tangled mass of preprocessor conditionals when
configuring the VNC server.
This ensures that the tls, sasl & websocket options are always
processed and an error is reported back to the user if any of
them were disabled at build time.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Handling of VNC audio messages results in printfs to the console.
This is of no use to anyone in production, so should be using the
normal VNC_DEBUG macro instead.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Error classes are a leftover from the days of "rich" error objects.
New code should always use ERROR_CLASS_GENERIC_ERROR. Commit 1d0d59f
added a use of ERROR_CLASS_DEVICE_NOT_FOUND. Replace it.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
vs->lsock may equal to 0, modify the check condition,
avoid possible vs->lsock leak.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The 'x509verify' parameter is documented as taking a path to the
x509 certificates, ie the same syntax as the 'x509' parameter.
commit 4db14629c3
Author: Gerd Hoffmann <kraxel@redhat.com>
Date: Tue Sep 16 12:33:03 2014 +0200
vnc: switch to QemuOpts, allow multiple servers
caused a regression by turning 'x509verify' into a boolean
parameter instead. This breaks setup from libvirt and is not
consistent with the docs.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Use inet_listen_opts instead of inet_listen. Allows us to drop some
pointless indirection: Format strings just to parse them again later on.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Gonglei <arei.gonglei@huawei.com>
Nobody cares about those strings, they are only used to check whenever
the vnc server / websocket support is enabled or not. Add bools for
this and drop the strings.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Gonglei <arei.gonglei@huawei.com>
This way the generated id will be stored in -writeconfig cfg files.
Also we can make vnc_auto_assign_id() local to vnc.c.
Tested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
vnc_display_local_addr will not be called with an invalid display id.
Add assert() to silence coverity warning about a null pointer dereference.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
in case we send and update for a complete scanline increment
the y offset to avoid running to find_next_bit for that lines
twice.
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Add new query vnc qmp command, for the lack of better ideas just name it
"query-vnc-servers". Changes over query-vnc:
* It returns a list of vnc servers, so multiple vnc server instances
are covered.
* Each vnc server returns a list of server sockets. Followup patch
will use that to also report websockets. In case we add support for
multiple server sockets server sockets (to better support ipv4+ipv6
dualstack) we can add them to the list too.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Also track the number of connections in "connecting" and "shared" state
(in addition to the "exclusive" state). Apply a configurable limit to
these connections.
The logic to apply the limit to connections in "shared" state is pretty
simple: When the limit is reached no new connections are allowed.
The logic to apply the limit to connections in "connecting" state (this
is the state you are in *before* successful authentication) is
slightly different: A new connect kicks out the oldest client which is
still in "connecting" state. This avoids a easy DoS by unauthenticated
users by simply opening connections until the limit is reached.
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch adds a display= parameter to the vnc options. This allows to
bind a vnc server instance to a specific display, allowing to create a
multiseat setup with a vnc server for each seat.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch switches vnc over to QemuOpts, and it (more or less
as side effect) allows multiple vnc server instances.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
In case the display id is "default" (which is the one you get if you
don't explicitly assign one) we keep the old name scheme, without
display, for backward compatibility reasons.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Gonglei <arei.gonglei@huawei.com>
DisplayState isn't used anywhere, drop it. Add the vnc server ID as
parameter instead, so it is possible to specify the server instance.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Gonglei <arei.gonglei@huawei.com>
Replace with a vnc_displays list, so we can have multiple vnc server
instances. Add vnc_server_find function to lookup a display by id.
With no id supplied return the first vnc server, for backward
compatibility reasons.
It is not possible (yet) to actually create multiple vnc server
instances.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Gonglei <arei.gonglei@huawei.com>
At least all the ones I've tested. We make the assumption that
pixman is going to be better at conversion than we are.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
[ kraxel: just hook up qemu_pixman_check_format ]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
graphic_hw_update and vnc_refresh_server_surface aren't
need to do when no vnc client connected. It can reduce
lock contention, because vnc_refresh will hold global big
lock two millisecond every three seconds.
Signed-off-by: ChenLiang <chenliang88@huawei.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
bits_per_pixel that are less than 8 could result in accessing
non-initialized buffers later in the code due to the expectation
that bytes_per_pixel value that is used to initialize these buffers is
never zero.
To fix this check that bits_per_pixel from the client is one of the
values that the rfb protocol specification allows.
This is CVE-2014-7815.
Signed-off-by: Petr Matousek <pmatouse@redhat.com>
[ kraxel: apply codestyle fix ]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
we currently have the Nagle algorithm enabled for all outgoing VNC updates.
This may delay sensitive updates as mouse movements or typing in the console.
As we currently prepare all data in a buffer and then send as much as we can
disabling the Nagle algorithm should not cause big trouble. Well established
VNC servers like TightVNC set TCP_NODELAY as well.
A regular framebuffer update request generates exactly one framebuffer update
which should be pushed out as fast as possible.
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
We need to remember has_updates for each vnc client. Otherwise it might
happen that vnc_update_client(has_dirty=1) takes the first exit due to
output buffers not being flushed yet and subsequent calls with
has_dirty=0 take the second exit, wrongly assuming there is nothing to
do because the work defered in the first call is ignored.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Peter Lieven <pl@kamp.de>
If the client asks for !incremental frame updates, it has lost its content
so dirty doesn't matter - it has to see the full frame, so setting force_update
Signed-off-by: Stephan Kulow <coolo@suse.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Peter Lieven <pl@kamp.de>
this patch makes the VNC server work correctly if the
server surface and the guest surface have different sizes.
Basically the server surface is adjusted to not exceed VNC_MAX_WIDTH
x VNC_MAX_HEIGHT and additionally the width is rounded up to multiple of
VNC_DIRTY_PIXELS_PER_BIT.
If we have a resolution whose width is not dividable by VNC_DIRTY_PIXELS_PER_BIT
we now get a small black bar on the right of the screen.
If the surface is too big to fit the limits only the upper left area is shown.
On top of that this fixes 2 memory corruption issues:
The first was actually discovered during playing
around with a Windows 7 vServer. During resolution
change in Windows 7 it happens sometimes that Windows
changes to an intermediate resolution where
server_stride % cmp_bytes != 0 (in vnc_refresh_server_surface).
This happens only if width % VNC_DIRTY_PIXELS_PER_BIT != 0.
The second is a theoretical issue, but is maybe exploitable
by the guest. If for some reason the guest surface size is bigger
than VNC_MAX_WIDTH x VNC_MAX_HEIGHT we end up in severe corruption since
this limit is nowhere enforced.
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
currently a malicious client could define a payload
size of 2^32 - 1 bytes and send up to that size of
data to the vnc server. The server would allocated
that amount of memory which could easily create an
out of memory condition.
This patch limits the payload size to 1MB max.
Please note that client_cut_text messages are currently
silently ignored.
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Since VNC_CONNECTED, VNC_DISCONNECTED, VNC_INITIALIZED share some
common functions, convert them in one patch.
Signed-off-by: Wenchao Xia <wenchaoqemu@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
In order to let event defines use existing types later, instead of
redefine new ones, some old type defines for spice and vnc are changed,
and BlockErrorAction is moved from block.h to qapi schema. Note that
BlockErrorAction is not merged with BlockdevOnError.
At this point, VncInfo is not made a child of VncBasicInfo, because
VncBasicInfo has mandatory fields where VncInfo makes them optional.
Signed-off-by: Wenchao Xia <wenchaoqemu@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Bug was added by 38ee14f4f3.
vnc_jobs_join call is missing in one code path.
Reported-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Current code silently changes the authentication settings
in case you try to set a password without password authentication
turned on. This is bad. Return an error instead.
If we want allow changing auth settings at runtime this should
be done explicitly using a separate monitor command, not as
side effect of set_passwd.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
These errors don't seem user initiated, so forcibly printing to the
monitor doesn't seem right. Just use error_report.
Cc: Anthony Liguori <aliguori@amazon.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
this fixes invalid rectangle updates observed after commit 12b316d
with the vmware VGA driver. The issues occured because the server
and client surface update seems to be out of sync at some points
and the max width of the surface is not dividable by
VNC_DIRTY_BITS_PER_PIXEL (16).
Reported-by: Serge Hallyn <serge.hallyn@ubuntu.com>
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The following artifical test (just the bitmap operation part) running
vnc_update_client 65536 times on a 2560x2048 surface illustrates the
performance difference:
All bits clean - vnc_update_client_new: 0.07 secs
vnc_update_client_new2: 0.07 secs
vnc_update_client_old: 10.98 secs
All bits dirty - vnc_update_client_new: 11.26 secs
- vnc_update_client_new2: 0.29 secs
vnc_update_client_old: 20.19 secs
Few bits dirty - vnc_update_client_new: 0.07 secs
- vnc_update_client_new2: 0.07 secs
vnc_update_client_old: 10.98 secs
vnc_update_client_new2 shows the performance of vnc_update_client
with this patch added.
Comparing with the test run of the last patch the performance
is at least unchanged while it is significantly improved
for the all bits dirty case.
Signed-off-by: Peter Lieven <pl@kamp.de>
Reviewed-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
vnc_update_client currently scans the dirty bitmap of each client
bitwise which is a very costly operation if only few bits are dirty.
vnc_refresh_server_surface does almost the same.
this patch optimizes both by utilizing the heavily optimized
function find_next_bit to find the offset of the next dirty
bit in the dirty bitmaps.
The following artifical test (just the bitmap operation part) running
vnc_update_client 65536 times on a 2560x2048 surface illustrates the
performance difference:
All bits clean - vnc_update_client_new: 0.07 secs
vnc_update_client_old: 10.98 secs
All bits dirty - vnc_update_client_new: 11.26 secs
vnc_update_client_old: 20.19 secs
Few bits dirty - vnc_update_client_new: 0.08 secs
vnc_update_client_old: 10.98 secs
The case for all bits dirty is still rather slow, this
is due to the implementation of find_and_clear_dirty_height.
This will be addresses in a separate patch.
Signed-off-by: Peter Lieven <pl@kamp.de>
Reviewed-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
this allows for setting VNC_DIRTY_PIXELS_PER_BIT to different
values than 16 if desired.
Reviewed-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Spotted by Coverity:
876 static int vnc_update_client_sync(VncState *vs, int has_dirty)
877 {
(1) Event freed_arg: "vnc_update_client(VncState *, int)" frees "vs". [details]
Also see events: [deref_arg]
878 int ret = vnc_update_client(vs, has_dirty);
(2) Event deref_arg: Calling "vnc_jobs_join(VncState *)" dereferences freed pointer "vs". [details]
Also see events: [freed_arg]
879 vnc_jobs_join(vs);
880 return ret;
881 }
Remove vnc_update_client_sync wrapper, replace it with an additional
argument to vnc_update_client, so we can so the sync properly in
vnc_update_client (i.e. skip it in case of a client disconnect).
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Some arguments to these functions are booleans - either by declaration,
or by actual usage, but sometimes value of 0 or 1 is passed for a bool,
and sometimes it is declared as int but a bool value, or true/false,
is passed to it instead. Clean it up a bit.
Cc: liguang <lig.fnst@cn.fujitsu.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The ledstate should be compared before modifiers updated,
otherwise the ledstate would be the same as current_led_state.
Reported-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Lei Li <lilei@linux.vnet.ibm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-id: 1368606040-11950-1-git-send-email-lilei@linux.vnet.ibm.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Added TLS support to the VNC QEMU Websockets implementation.
VNC-TLS needs to be enabled for this feature to be used.
The required certificates are specified as in case of VNC-TLS
with the VNC parameter "x509=<path>".
If the server certificate isn't signed by a rooth authority it needs to
be manually imported in the browser because at least in case of Firefox
and Chrome there is no user dialog, the connection just gets canceled.
As a side note VEncrypt over Websocket doesn't work atm because TLS can't
be stacked in the current implementation. (It also didn't work before)
Nevertheless to my knowledge there is no HTML 5 VNC client which supports
it and the Websocket connection can be encrypted with regular TLS now so
it should be fine for most use cases.
Signed-off-by: Tim Hardeck <thardeck@suse.de>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Message-id: 1366727581-5772-1-git-send-email-thardeck@suse.de
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Make gui update rate adaption code in gui_update() actually work.
Sprinkle in a tracepoint so you can see the code at work. Remove
the update rate adaption code in vnc and make vnc simply use the
generic bits instead.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add QemuConsole parameter to vga_hw_*, so the interface allows to update
non-active consoles (the actual code can't handle this yet, see next
patch). Passing NULL is allowed and updates the active console, like
the functions do today.
While touching all vga_hw_* calls anyway rename that to the functions to
hardware-neutral graphics_hw_*
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The fcntl(fd, F_SETFL, O_NONBLOCK) flag is not specific to sockets.
Rename to qemu_set_nonblock() just like qemu_set_cloexec().
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Now that nobody depends on DisplayState in DisplayChangeListener
callbacks any more we can remove the parameter from all callbacks.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Replace the dpy_gfx_resize and dpy_gfx_setdata DisplayChangeListener
callbacks with a dpy_gfx_switch callback which notifies the ui code
when the framebuffer backing storage changes.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
It's broken by design. There can be multiple DisplayChangeListener
instances, so they simply can't store state in the (single) DisplayState
struct. Try 'qemu -display gtk -vnc :0', watch it crash & burn.
With DisplayChangeListenerOps having a more sane interface now we can
simply use the DisplayChangeListener pointer to get access to our
private data instead.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Split callbacks into separate Ops struct. Pass DisplayChangeListener
pointer as first argument to all callbacks. Uninline a bunch of
display functions and move them from console.h to console.c
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Some VncState values are not initialized before the Websocket handshake.
If it fails QEMU segfaults during the cleanup. To prevent this behavior
intialization checks are added.
Signed-off-by: Tim Hardeck <thardeck@suse.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch adds basic Websocket Protocol version 13 - RFC 6455 - support
to QEMU VNC. Binary encoding support on the client side is mandatory.
Because of the GnuTLS requirement the Websockets implementation is
optional (--enable-vnc-ws).
To activate Websocket support the VNC option "websocket"is used, for
example "-vnc :0,websocket".
The listen port for Websocket connections is (5700 + display) so if
QEMU VNC is started with :0 the Websocket port would be 5700.
As an alternative the Websocket port could be manually specified by
using ",websocket=<port>" instead.
Parts of the implementation base on Anthony Liguori's QEMU Websocket
patch from 2010 and on Joel Martin's LibVNC Websocket implementation.
Signed-off-by: Tim Hardeck <thardeck@suse.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Following Anthony Liguori's Websocket implementation I have added the
buffer_advance function to VNC and replaced all related buffer memmove
operations with it.
Signed-off-by: Tim Hardeck <thardeck@suse.de>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch adds an x argument to qemu_pixman_linebuf_fill so it can
also be used to convert a partial scanline. Then fix tight + png/jpeg
encoding by passing in the x+y offset, so the data is read from the
correct screen location instead of the upper left corner.
Cc: 1087974@bugs.launchpad.net
Cc: qemu-stable@nongnu.org
Reported-by: Tim Hardeneck <thardeck@suse.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Daniel P. Berrange