KVM_GET_SUPPORTED_CPUID ioctl is called frequently when initializing
CPU. Depends on CPU features and CPU count, the number of calls can be
extremely high which slows down QEMU booting significantly. In our
testing, we saw 5922 calls with switches:
-cpu SandyBridge -smp 6,sockets=6,cores=1,threads=1
This ioctl takes more than 100ms, which is almost half of the total
QEMU startup time.
While for most cases the data returned from two different invocations
are not changed, that means, we can cache the data to avoid trapping
into kernel for the second time. To make sure the cache safe one
assumption is desirable: the ioctl is stateless. This is not true for
CPUID leaves in general (such as CPUID leaf 0xD, whose value depends
on guest XCR0 and IA32_XSS) but it is true of KVM_GET_SUPPORTED_CPUID,
which runs before there is a value for XCR0 and IA32_XSS.
Signed-off-by: Chao Peng <chao.p.peng@linux.intel.com>
Message-Id: <1465784487-23482-1-git-send-email-chao.p.peng@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
These structs are never used to represent the bytes that go over the
network. The big-endian network data is built into a uint8_t array
in nbd_{receive,send}_{request,reply}. Remove the unused magic field,
reorder the struct to avoid holes, and remove the packed attribute.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The cpu_to_*w() functions just compose a pointer dereference
with a byteswap. Instead use st*_p(), which handles potential
pointer misalignment and avoids the need to cast the pointer.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <1465575342-12146-1-git-send-email-peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The *_to_cpup() functions are not very useful, as they simply do
a pointer dereference and then a *_to_cpu(). Instead use either:
* ld*_*_p(), if the data is at an address that might not be
correctly aligned for the load
* a local dereference and *_to_cpu(), if the pointer is
the correct type and known to be correctly aligned
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <1465570836-22211-1-git-send-email-peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The CONFIG_SIGEV_THREAD_ID switch is unused since the related code
has been removed by commit 6d32717155
("aio / timers: Remove alarm timers"), so it can safely be removed
nowadays.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1465571084-19885-1-git-send-email-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use the avx2 primitives during the test, thus making sure that the
compiler and assembler could actually use avx2.
This also detects the failure case on gcc 4.8.x with -save-temps
and avoids the need for the gcc version check in cutils.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <1465557378-24105-3-git-send-email-dgilbert@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When configured with --extra-cflags=-O2 gcc optimised out the test
and the readelf failed the check leaving avx2 disabled.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <1465557378-24105-2-git-send-email-dgilbert@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
"ctags" produces a file named "tags", not "ctags". It doesn't look
reasonable to use phony target name as a file name to remove. Just use
exact file names to remove in "ctags" and "TAGS" target receipts.
Signed-off-by: Sergey Fedorov <serge.fdrv@gmail.com>
Signed-off-by: Sergey Fedorov <sergey.fedorov@linaro.org>
Message-Id: <1465495115-24665-1-git-send-email-sergey.fedorov@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
MinGW seems to compile currently without warnings, so it should
be safe to enable -Werror now for this environment, too.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1465373606-18486-1-git-send-email-thuth@redhat.com>
Tested-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
qemu/osdep.h checks whether MAP_ANONYMOUS is defined, but this check
is bogus without a previous inclusion of sys/mman.h. Include it in
sysemu/os-posix.h and remove it from everywhere else.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
CONFIG_ZERO_MALLOC was only used in qemu-malloc.c and
this file has been removed with the following commit:
41a748265f
Remove qemu_malloc/qemu_free
So we don't need this configuration setting anymore.
This patch also removes the z_version variable, since
this is now also not needed anymore.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <1465398683-3152-1-git-send-email-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=oSJo
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches
# gpg: Signature made Thu 16 Jun 2016 15:01:27 BST
# gpg: using RSA key 0x7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kevin/tags/for-upstream: (39 commits)
hbitmap: add 'pos < size' asserts
iotests: Add test for oVirt-like storage migration
iotests: Add test for post-mirror backing chains
block/null: Implement bdrv_refresh_filename()
block/mirror: Fix target backing BDS
block: Allow replacement of a BDS by its overlay
rbd:change error_setg() to error_setg_errno()
iotests: 095: Clean up QEMU before showing image info
block: Create the commit block job before reopening any image
block: Prevent sleeping jobs from resuming if they have been paused
block: use the block job list in qmp_query_block_jobs()
block: use the block job list in bdrv_drain_all()
block: Fix snapshot=on with aio=native
block: Remove bs->zero_beyond_eof
qcow2: Let vmstate call qcow2_co_preadv/pwrite directly
block: Make bdrv_load/save_vmstate coroutine_fns
block: Allow .bdrv_load/save_vmstate() to return 0/-errno
block: Make .bdrv_load_vmstate() vectored
block: Introduce bdrv_preadv()
doc: Fix mailing list address in tests/qemu-iotests/README
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJXYqffAAoJEDuxQgLoOKytiuoH+wWkxRsuRvuNZf2feQOyyznd
XJdycJKNnJp5PscryaHqJzc1tAapEKDE257URYkXI+hF7Vue1r6jNrfgfR6AXysK
gVfJ0BbELYWly7ID04Q8C9P1RUmEjbYqQRnB7nua33wq9P/92RIR373p/kGVJBix
RM4e+xYfvGYOgNODF9jJKw4R5Sw2ZVmchWlwjcYjyRW8gOiS8OaFwX7FIB3+kj+P
ew4hsZkZmK8uroMmfC3Oe5iZfvLXzKBaMT89XiL6lUXhDizYvSkPOJoIyLrfeQ3e
5AAv0AnQhrSfG2YNjOA3SsFiIIUEjLf8jr05Cr0YLXqr4OHk3Zoc7vsKDnY3ai8=
=QRX6
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'mreitz/tags/pull-block-for-kevin-2016-06-16' into queue-block
Block patches
# gpg: Signature made Thu Jun 16 15:21:35 2016 CEST
# gpg: using RSA key 0x3BB14202E838ACAD
# gpg: Good signature from "Max Reitz <mreitz@redhat.com>"
# Primary key fingerprint: 91BE B60A 30DB 3E88 57D1 1829 F407 DB00 61D5 CF40
# Subkey fingerprint: 58B3 81CE 2DC8 9CF9 9730 EE64 3BB1 4202 E838 ACAD
* mreitz/tags/pull-block-for-kevin-2016-06-16:
hbitmap: add 'pos < size' asserts
iotests: Add test for oVirt-like storage migration
iotests: Add test for post-mirror backing chains
block/null: Implement bdrv_refresh_filename()
block/mirror: Fix target backing BDS
block: Allow replacement of a BDS by its overlay
rbd:change error_setg() to error_setg_errno()
iotests: 095: Clean up QEMU before showing image info
block: Create the commit block job before reopening any image
block: Prevent sleeping jobs from resuming if they have been paused
block: use the block job list in qmp_query_block_jobs()
block: use the block job list in bdrv_drain_all()
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
For now, fail in hbitmap_set on start + count > size will come from
hbitmap_set
hb_count_between
hbitmap_iter_init
assert(pos < hb->size)
This patch adds such checks to set/get/reset functions of hbitmap.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 1465924093-76875-2-git-send-email-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20160610185750.30956-6-mreitz@redhat.com
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
The null block driver ignores any filename used for creating its BDSs,
which allows creating such BDSs even without any filename at all. In
that case, we currently construct a JSON filename when queried instead
of a plain "null-co://" or "null-aio://". This patch implements
bdrv_refresh_filename() to remedy this behavior.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20160610185750.30956-4-mreitz@redhat.com
[mreitz@redhat.com: Added commit message]
Signed-off-by: Max Reitz <mreitz@redhat.com>
Currently, we are trying to move the backing BDS from the source to the
target in bdrv_replace_in_backing_chain() which is called from
mirror_exit(). However, mirror_complete() already tries to open the
target's backing chain with a call to bdrv_open_backing_file().
First, we should only set the target's backing BDS once. Second, the
mirroring block job has a better idea of what to set it to than the
generic code in bdrv_replace_in_backing_chain() (in fact, the latter's
conditions on when to move the backing BDS from source to target are not
really correct).
Therefore, remove that code from bdrv_replace_in_backing_chain() and
leave it to mirror_complete().
Depending on what kind of mirroring is performed, we furthermore want to
use different strategies to open the target's backing chain:
- If blockdev-mirror is used, we can assume the user made sure that the
target already has the correct backing chain. In particular, we should
not try to open a backing file if the target does not have any yet.
- If drive-mirror with mode=absolute-paths is used, we can and should
reuse the already existing chain of nodes that the source BDS is in.
In case of sync=full, no backing BDS is required; with sync=top, we
just link the source's backing BDS to the target, and with sync=none,
we use the source BDS as the target's backing BDS.
We should not try to open these backing files anew because this would
lead to two BDSs existing per physical file in the backing chain, and
we would like to avoid such concurrent access.
- If drive-mirror with mode=existing is used, we have to use the
information provided in the physical image file which means opening
the target's backing chain completely anew, just as it has been done
already.
If the target's backing chain shares images with the source, this may
lead to multiple BDSs per physical image file. But since we cannot
reliably ascertain this case, there is nothing we can do about it.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20160610185750.30956-3-mreitz@redhat.com
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
change_parent_backing_link() asserts that the BDS to be replaced is not
used as a backing file. However, we may want to replace a BDS by its
overlay in which case that very link should not be redirected.
For instance, when doing a sync=none drive-mirror operation, we may have
the following BDS/BB forest before block job completion:
target
base <- source <- BlockBackend
During job completion, we want to establish the source BDS as the
target's backing node:
target
|
v
base <- source <- BlockBackend
This makes the target a valid replacement for the source:
target <- BlockBackend
|
v
base <- source
Without this modification to change_parent_backing_link() we have to
inject the target into the graph before the source is its backing node,
thus temporarily creating a wrong graph:
target <- BlockBackend
base <- source
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20160610185750.30956-2-mreitz@redhat.com
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Ceph RBD block driver does not use error_setg_errno() where
it is possible to use. This patch replaces error_setg()
from error_setg_errno().
Signed-off-by: Vikhyat Umrao <vumrao@redhat.com>
Message-id: 1462780319-5796-1-git-send-email-vumrao@redhat.com
Reviewed-by: Josh Durgin <jdurgin@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
If the base or overlay images need to be reopened in read-write mode
but the block_job_create() call fails then no one will put those
images back in read-only mode.
We can solve this problem easily by calling block_job_create() first.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-id: aa495045770a6f1a7cc5d408397a17c75097fdd8.1464346103.git.berto@igalia.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
If we pause a block job and drain its BlockDriverState we want that
the job remains inactive until we call block_job_resume() again.
However if we pause the job while it is sleeping then it will resume
when the sleep timer fires.
This patch prevents that from happening by checking if the job has
been paused after it comes back from sleeping.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Suggested-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 3d9011151512326b890d22bdab3530244ef349d7.1464346103.git.berto@igalia.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
qmp_query_block_jobs() uses bdrv_next() to look for block jobs, but
this function can only find those in top-level BlockDriverStates.
This patch uses block_job_next() instead.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-id: a8b7e5497b7c1fa67c12fcceae1630d01c3b1f96.1464346103.git.berto@igalia.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
bdrv_drain_all() pauses all block jobs by using bdrv_next() to iterate
over all top-level BlockDriverStates. Therefore the code is unable to
find block jobs in other nodes.
This patch uses block_job_next() to iterate over all block jobs.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-id: 55ee7d7d4a65c28aa1a1b28823897ef326f328e2.1464346103.git.berto@igalia.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
snapshot=on creates a temporary overlay that is always opened with
cache=unsafe (the cache mode specified by the user is only for the
actual image file and its children). This means that we must not inherit
the BDRV_O_NATIVE_AIO flag for the temporary overlay because trying to
use Linux AIO with cache=unsafe results in an error.
Reproducer without this patch:
$ x86_64-softmmu/qemu-system-x86_64 -drive file=/tmp/test.qcow2,cache=none,aio=native,snapshot=on
qemu-system-x86_64: -drive file=/tmp/test.qcow2,cache=none,aio=native,snapshot=on: aio=native was
specified, but it requires cache.direct=on, which was not specified.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
It is always true for open images now.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
We don't really want to go through the block layer in order to read from
or write to the vmstate in a qcow2 image. Doing so required a few ugly
hacks like saving and restoring the old image size (because writing to
vmstate offsets would increase the image size) or disabling the "reads
after EOF = zeroes" logic. When calling the right functions directly,
these hacks aren't necessary any more.
Note that .bdrv_vmstate_load/save() return 0 instead of the number of
bytes in case of success now.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
This allows drivers to share code between normal I/O and vmstate
accesses.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
The return value of .bdrv_load/save_vmstate() can be any non-negative
number in case of success now. It used to be bytes/-errno.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
This brings it in line with .bdrv_save_vmstate().
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
We already have a byte-based bdrv_pwritev(), but the read counterpart
was still missing. This commit adds it.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
The address of the mailing list is qemu-devel@nongnu.org
instead of qemu-devel@savannah.nongnu.org. And while we're
at it, also mention the qemu-block mailing list here.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
linux-aio uses a BH in order to make sure that the remaining completions
are processed even in nested event loops of completion callbacks in
order to avoid deadlocks.
There is no need, however, to have the BH overhead for the first call
into qemu_laio_completion_bh() or after all pending completions have
already been processed. Therefore, this patch calls directly into
qemu_laio_completion_bh() in qemu_laio_completion_cb() and cancels
the BH after qemu_laio_completion_bh() has processed all pending
completions.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
If block drivers say that they can do an alignment < 512 bytes, let's
just suppose they mean it. raw-posix used to be an offender with respect
to this, but it can actually deal with byte-aligned requests now.
The default is still 512 bytes for any drivers that only implement
sector-based interfaces, but it is 1 now for drivers that implement
.bdrv_co_preadv.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
The raw-posix block driver actually supports byte-aligned requests now
on non-O_DIRECT images, like it already (and previously incorrectly)
claimed in bs->request_alignment.
For some block drivers this means that a RMW cycle can be avoided when
they write sub-sector metadata e.g. for cluster allocation.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
In order to use the modern byte-based .bdrv_co_preadv/pwritev()
interface, this patch switches raw-posix to coroutine-based interfaces
as a first step. In terms of semantics and performance, it doesn't make
a difference with the existing code whether we go from a coroutine to a
callback-based interface already in block/io.c or only in linux-aio.c
As there have been concerns in the past that this change may be a step
in the wrong direction with respect to a possible AIO fast path, the
old callback-based interface for linux-aio is left around and can be
reactivated when a fast path (e.g. directly from virtio-blk dataplane,
bypassing the whole block layer) is implemented.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
This patch makes bdrv_aligned_preadv() ready to accept byte-aligned
requests. Note that this doesn't mean that such requests are actually
made. The caller still ensures that all requests are aligned to at least
512 bytes.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
In a first step to convert the common I/O path to work on bytes rather
than sectors, this converts the copy-on-read logic that is used by
bdrv_aligned_preadv().
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Back in the 2.3.0 release we declared qcow[2] encryption as
deprecated, warning people that it would be removed in a future
release.
commit a1f688f415
Author: Markus Armbruster <armbru@redhat.com>
Date: Fri Mar 13 21:09:40 2015 +0100
block: Deprecate QCOW/QCOW2 encryption
The code still exists today, but by a (happy?) accident we entirely
broke the ability to use qcow[2] encryption in the system emulators
in the 2.4.0 release due to
commit 8336aafae1
Author: Daniel P. Berrange <berrange@redhat.com>
Date: Tue May 12 17:09:18 2015 +0100
qcow2/qcow: protect against uninitialized encryption key
This commit was designed to prevent future coding bugs which
might cause QEMU to read/write data on an encrypted block
device in plain text mode before a decryption key is set.
It turns out this preventative measure was a little too good,
because we already had a long standing bug where QEMU read
encrypted data in plain text mode during system emulator
startup, in order to guess disk geometry:
Thread 10 (Thread 0x7fffd3fff700 (LWP 30373)):
#0 0x00007fffe90b1a28 in raise () at /lib64/libc.so.6
#1 0x00007fffe90b362a in abort () at /lib64/libc.so.6
#2 0x00007fffe90aa227 in __assert_fail_base () at /lib64/libc.so.6
#3 0x00007fffe90aa2d2 in () at /lib64/libc.so.6
#4 0x000055555587ae19 in qcow2_co_readv (bs=0x5555562accb0, sector_num=0, remaining_sectors=1, qiov=0x7fffffffd260) at block/qcow2.c:1229
#5 0x000055555589b60d in bdrv_aligned_preadv (bs=bs@entry=0x5555562accb0, req=req@entry=0x7fffd3ffea50, offset=offset@entry=0, bytes=bytes@entry=512, align=align@entry=512, qiov=qiov@entry=0x7fffffffd260, flags=0) at block/io.c:908
#6 0x000055555589b8bc in bdrv_co_do_preadv (bs=0x5555562accb0, offset=0, bytes=512, qiov=0x7fffffffd260, flags=<optimized out>) at block/io.c:999
#7 0x000055555589c375 in bdrv_rw_co_entry (opaque=0x7fffffffd210) at block/io.c:544
#8 0x000055555586933b in coroutine_thread (opaque=0x555557876310) at coroutine-gthread.c:134
#9 0x00007ffff64e1835 in g_thread_proxy (data=0x5555562b5590) at gthread.c:778
#10 0x00007ffff6bb760a in start_thread () at /lib64/libpthread.so.0
#11 0x00007fffe917f59d in clone () at /lib64/libc.so.6
Thread 1 (Thread 0x7ffff7ecab40 (LWP 30343)):
#0 0x00007fffe91797a9 in syscall () at /lib64/libc.so.6
#1 0x00007ffff64ff87f in g_cond_wait (cond=cond@entry=0x555555e085f0 <coroutine_cond>, mutex=mutex@entry=0x555555e08600 <coroutine_lock>) at gthread-posix.c:1397
#2 0x00005555558692c3 in qemu_coroutine_switch (co=<optimized out>) at coroutine-gthread.c:117
#3 0x00005555558692c3 in qemu_coroutine_switch (from_=0x5555562b5e30, to_=to_@entry=0x555557876310, action=action@entry=COROUTINE_ENTER) at coroutine-gthread.c:175
#4 0x0000555555868a90 in qemu_coroutine_enter (co=0x555557876310, opaque=0x0) at qemu-coroutine.c:116
#5 0x0000555555859b84 in thread_pool_completion_bh (opaque=0x7fffd40010e0) at thread-pool.c:187
#6 0x0000555555859514 in aio_bh_poll (ctx=ctx@entry=0x5555562953b0) at async.c:85
#7 0x0000555555864d10 in aio_dispatch (ctx=ctx@entry=0x5555562953b0) at aio-posix.c:135
#8 0x0000555555864f75 in aio_poll (ctx=ctx@entry=0x5555562953b0, blocking=blocking@entry=true) at aio-posix.c:291
#9 0x000055555589c40d in bdrv_prwv_co (bs=bs@entry=0x5555562accb0, offset=offset@entry=0, qiov=qiov@entry=0x7fffffffd260, is_write=is_write@entry=false, flags=flags@entry=(unknown: 0)) at block/io.c:591
#10 0x000055555589c503 in bdrv_rw_co (bs=bs@entry=0x5555562accb0, sector_num=sector_num@entry=0, buf=buf@entry=0x7fffffffd2e0 "\321,", nb_sectors=nb_sectors@entry=21845, is_write=is_write@entry=false, flags=flags@entry=(unknown: 0)) at block/io.c:614
#11 0x000055555589c562 in bdrv_read_unthrottled (nb_sectors=21845, buf=0x7fffffffd2e0 "\321,", sector_num=0, bs=0x5555562accb0) at block/io.c:622
#12 0x000055555589c562 in bdrv_read_unthrottled (bs=0x5555562accb0, sector_num=sector_num@entry=0, buf=buf@entry=0x7fffffffd2e0 "\321,", nb_sectors=nb_sectors@entry=21845) at block/io.c:634
nb_sectors@entry=1) at block/block-backend.c:504
#14 0x0000555555752e9f in guess_disk_lchs (blk=blk@entry=0x5555562a5290, pcylinders=pcylinders@entry=0x7fffffffd52c, pheads=pheads@entry=0x7fffffffd530, psectors=psectors@entry=0x7fffffffd534) at hw/block/hd-geometry.c:68
#15 0x0000555555752ff7 in hd_geometry_guess (blk=0x5555562a5290, pcyls=pcyls@entry=0x555557875d1c, pheads=pheads@entry=0x555557875d20, psecs=psecs@entry=0x555557875d24, ptrans=ptrans@entry=0x555557875d28) at hw/block/hd-geometry.c:133
#16 0x0000555555752b87 in blkconf_geometry (conf=conf@entry=0x555557875d00, ptrans=ptrans@entry=0x555557875d28, cyls_max=cyls_max@entry=65536, heads_max=heads_max@entry=16, secs_max=secs_max@entry=255, errp=errp@entry=0x7fffffffd5e0) at hw/block/block.c:71
#17 0x0000555555799bc4 in ide_dev_initfn (dev=0x555557875c80, kind=IDE_HD) at hw/ide/qdev.c:174
#18 0x0000555555768394 in device_realize (dev=0x555557875c80, errp=0x7fffffffd640) at hw/core/qdev.c:247
#19 0x0000555555769a81 in device_set_realized (obj=0x555557875c80, value=<optimized out>, errp=0x7fffffffd730) at hw/core/qdev.c:1058
#20 0x00005555558240ce in property_set_bool (obj=0x555557875c80, v=<optimized out>, opaque=0x555557875de0, name=<optimized out>, errp=0x7fffffffd730)
at qom/object.c:1514
#21 0x0000555555826c87 in object_property_set_qobject (obj=obj@entry=0x555557875c80, value=value@entry=0x55555784bcb0, name=name@entry=0x55555591cb3d "realized", errp=errp@entry=0x7fffffffd730) at qom/qom-qobject.c:24
#22 0x0000555555825760 in object_property_set_bool (obj=obj@entry=0x555557875c80, value=value@entry=true, name=name@entry=0x55555591cb3d "realized", errp=errp@entry=0x7fffffffd730) at qom/object.c:905
#23 0x000055555576897b in qdev_init_nofail (dev=dev@entry=0x555557875c80) at hw/core/qdev.c:380
#24 0x0000555555799ead in ide_create_drive (bus=bus@entry=0x555557629630, unit=unit@entry=0, drive=0x5555562b77e0) at hw/ide/qdev.c:122
#25 0x000055555579a746 in pci_ide_create_devs (dev=dev@entry=0x555557628db0, hd_table=hd_table@entry=0x7fffffffd830) at hw/ide/pci.c:440
#26 0x000055555579b165 in pci_piix3_ide_init (bus=<optimized out>, hd_table=0x7fffffffd830, devfn=<optimized out>) at hw/ide/piix.c:218
#27 0x000055555568ca55 in pc_init1 (machine=0x5555562960a0, pci_enabled=1, kvmclock_enabled=<optimized out>) at /home/berrange/src/virt/qemu/hw/i386/pc_piix.c:256
#28 0x0000555555603ab2 in main (argc=<optimized out>, argv=<optimized out>, envp=<optimized out>) at vl.c:4249
So the safety net is correctly preventing QEMU reading cipher
text as if it were plain text, during startup and aborting QEMU
to avoid bad usage of this data.
For added fun this bug only happens if the encrypted qcow2
file happens to have data written to the first cluster,
otherwise the cluster won't be allocated and so qcow2 would
not try the decryption routines at all, just return all 0's.
That no one even noticed, let alone reported, this bug that
has shipped in 2.4.0, 2.5.0 and 2.6.0 shows that the number
of actual users of encrypted qcow2 is approximately zero.
So rather than fix the crash, and backport it to stable
releases, just go ahead with what we have warned users about
and disable any use of qcow2 encryption in the system
emulators. qemu-img/qemu-io/qemu-nbd are still able to access
qcow2 encrypted images for the sake of data conversion.
In the future, qcow2 will gain support for the alternative
luks format, but when this happens it'll be using the
'-object secret' infrastructure for getting keys, which
avoids this problematic scenario entirely.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add a new BDRV_REQ_MASK constant, and use it to make sure that
caller flags are always valid.
Tested with 'make check' and with qemu-iotests on both '-raw'
and '-qcow2'; the only failure turned up was fixed in the
previous commit.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commit e253f4b8 converted mirroring from sector-based bdrv_aio_*
to byte-based blk_aio_*, but failed to account for the subtle
difference in signatures (the former takes a semi-redundant length,
the latter takes a flags parameter). Since all of our flags are
currently smaller in size than BDRV_SECTOR_SIZE, it has no ill
effects until we either perform sub-sector mirroring, or we start
asserting that no unexpected flags are set. I found it while
testing new asserts when qemu-iotests 132 started warning about an
unknown flag 0x200000.
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If no -t option is specified, bool writethrough stayed uninitialised.
Initialise it as false, which makes cache=writeback the default cache
mode.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
commit 243e6f69c1 ("m25p80: Switch to byte-based block access")
replaced blk_read() calls with blk_pread() but return values are
different.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Acquire aio context before run command, this is mandatory for unit tests.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Kevin Wolf <kwolf@redhat.com>
CC: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When opening a device with a locked tray, gives an error explaining the
device tray is locked and that the user should wait and try again. This
is less confusing than the previous error, which simply stated that the
tray was locked.
Signed-off-by: Colin Lord <clord@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This changes qcow2 to implement the byte-based .bdrv_co_pwritev
interface rather than the sector-based old one.
As preallocation uses the same allocation function as normal writes, and
the interface of that function needs to be changed, it is converted in
the same patch.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>