* 'ppc-next' of git://repo.or.cz/qemu/agraf:
Fix a bug in mtsr/mtsrin emulation on ppc64
pSeries: Clean up write-only variables
w32: Fix compilation and replace non-portable usage of ulong
The SDIO specification introduces new commands 52 and 53.
Handle as illegal command but do not complain on stderr,
as SDIO-aware OSes (including Linux) may legitimately use
these in their probing for presence of an SDIO card.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Remove a duplicate #include of sysbus.h.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
If pic_irq is greater than 7, the irq level is always 0 on 32bits.
Signed-off-by: TeLeMan <geleman@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
A few pieces of the pSeries emulation code have variables which are set
but never used, which causes warnings on gcc 4.6. This patch removes
these instances.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
the s390 memory detection has a 16bit field that specifies the amount of
increments. This patch adopts the memory size to always fit into that
scheme. This also fixes virtio detection for these guests, since the
descriptor page is located after the main memory.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
The s390x virtio bus keeps management information on virtio after the top
of the guest's RAM. We need to be able to tell the guest the size of its
RAM (without virtio stuff), but also be able to trap when the guest accesses
RAM outside of its scope (including virtio stuff).
So we need a variable telling us the size of the virtio stuff, so we can
calculate the highest available RAM address from that.
While at it, also increase the maximum number of virtio pages, so we play
along well with more recent kernels that spawn a ridiculous number of virtio
console adapters.
Signed-off-by: Alexander Graf <agraf@suse.de>
AHCI provides two ways of reading/writing data:
1) NCQ
2) ATA commands with the LBA in the command FIS
In the second code path, we didn't handle any LBAs that were bigger than
16 bits, so whenever a guest that used high LBA numbers wanted to access
data, the LBA got truncated down to 16 bits, giving the guest garbage.
This patch adds support for LBAs higher than 16 bits. I've tested that it
works just fine with SeaBIOS and Linux guests. This patch also unbreaks
the often reported grub errors people have seen with AHCI.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
DriveInfo is closely tied to -drive, and like -drive, it mixes
information about host and guest part of the block device. Unlike
DriveInfo, BlockDriverState should be about the host part only.
One of the remaining guest bits there is the "type hint". -drive
option media sets it, and qdevs "ide-drive", "scsi-disk" and non-qdev
IF_XEN devices check it to pick HD vs. CD.
Communicate -drive option media via new DriveInfo member media_cd
instead.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
A "scsi-disk" is either a hard disk or a CD-ROM, depending on the
associated BlockDriverState's type hint. Unclean; disk vs. CD belongs
to the guest part, not the host part.
Have separate qdevs "scsi-hd" and "scsi-cd" to model disk vs. CD in
the guest part.
Keep scsi-disk for backward compatibility.
Don't copy scsi-disk property removable to scsi-cd. It's not used and
always zero(!) there.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
An "ide-drive" is either a hard disk or a CD-ROM, depending on the
associated BlockDriverState's type hint. Unclean; disk vs. CD belongs
to the guest part, not the host part.
Have separate qdevs "ide-hd" and "ide-cd" to model disk vs. CD in
the guest part.
Keep ide-drive for backward compatibility.
"ide-disk" would perhaps be a nicer name than "ide-hd", but there's
already "scsi-disk", which is like "ide-drive", and will be likewise
split in the next commit. {ide,scsi}-{hd,cd} is the best consistent
set of names I could find within the backward compatibility
straightjacket.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If ahci_dma_set_inactive is called a while there is still a pending BH
from a previous run, we will crash on the second run of
ahci_check_cmd_bh as it overwrites AHCIDevice::check_bh. Avoid this
broken and redundant duplicate registration.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
These printfs aren't really debug messages, but clearly indicate a bug if they
ever become effective. Noone uses DEBUG_IDE, let's re-enable the check
unconditionally and make it an assertion instead of printfs in the device
emulation.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
cppcheck report:
hw/xen_disk.c:309: style:
Variable 'len' is assigned a value that is never used
Cc: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Fix regression of 667bb59: ahci_init initializes ahci.mem, so we have to
move bar registration after it.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
* 'ppc-next' of git://repo.or.cz/qemu/agraf:
PPC: Qdev'ify e500 pci
PPC MPC7544DS: Use new TLB helper function
PPC: Implement e500 (FSL) MMU
PPC: Add another 64 bits to instruction feature mask
PPC: Add GS MSR definition
PPC: Make MPC8544DS emulation work w/o KVM
PPC: Make MPC8544DS obey -cpu switch
Fix off-by-one error in sizing pSeries hcall table
ppc64: Fix out-of-tree builds
kvm: ppc: warn user on PAGE_SIZE mismatch
kvm: ppc: detect old headers
monitor: add PPC BookE SPRs
kvm: ppc: fixes for KVM_SET_SREGS on init
ppc64: Don't try to build sPAPR RTAS on Darwin
Place pseries vty devices at addresses more similar to existing machines
Make pSeries 'model' property more closely resemble real hardware
pseries: Increase maximum CPUs to 256
The e500 PCI controller isn't qdev'ified yet. This leads to severe issues
when running with -drive.
To be able to use a virtio disk with an e500 VM, let's convert the PCI
controller over to qdev.
Reviewed-by: Paul Brook <paul@codesourcery.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Now that we have some nice helpers that can find us a TLB entry, let's
use that on the machine initialization code, so we don't need to know
about the internals of the TLB array.
Signed-off-by: Alexander Graf <agraf@suse.de>
The MPC8544DS board emulation was only used with KVM so far, so some
parts of the code didn't provide proper values for non-KVM execution.
This patch makes the machine work without KVM enabled. To actually use
this, you also need proper e500v2 MMU emulation.
Signed-off-by: Alexander Graf <agraf@suse.de>
The MPC8544DS board emulation code ignored the user defined -cpu switch.
This patch enables it to only provide a sane default, not force an e500v2
CPU inside.
Signed-off-by: Alexander Graf <agraf@suse.de>
The pSeries machine uses two tables to look up guest hcalls for emulation.
One of these is exactly one entry too small to hold all the hcalls it needs
to, leading to memory corruption.
This patch fixes the bug, and while we're at it, make both tables 'static'
since they're never used from other modules.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
Read them via KVM_GET_SREGS in kvm_arch_get_registers(),
and display them in "info registers".
Also get CR and PID from the existing KVM_GET_REGS.
Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Currently the qemu pseries machine numbers its virtual serial devices
from 0. However, existing pSeries machines running pHyp number them from
0x30000000.
In theory these indices are arbitrary, since everything necessary for the
kernel to find them is advertised in the device tree. However the debian
installer, at least, incorrectly looks for a device named vty@30... to
determine whether to use the hypervisor console.
Therefore this patch moves the numbers we use to match the existing pHyp
practice, in order to workaround broken userspace apps of this type.
Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Currently, the qemu emulated pseries machine puts
"qemu,emulated-pSeries-LPAR" in the device tree's root level 'model'
property. Unfortunately this confuses some installers and ybin, which
expect this to start with "IBM" on pSeries machines. This patch addresses
this problem, making the property more closely resemble the pattern of
existing real hardware.
Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
The original pSeries machine was limited to 32 CPUs, more or less
arbitrarily. Particularly when we get SMT KVM guests it will be
pretty easy to exceed this. Therefore, raise the max number of CPUs
in a pseries machine guest to 256.
Signed-off-by: Anton Blanchard <anton@au1.ibm.com>
Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Prototype without "inline" keyword breaks the build with some gcc
versions. Noticed by Alexander Graf.
Fix this by removing the inline keywork everywhere. Some functions
can't be inlined anyway as the are referenced using function pointers.
Beside that gcc does a pretty good job on auto-inlining these days.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The 'sense' field in the HBA status structure is misnamed, as it
actually carries the SCSI status. Rename it.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Cc: qemu-trivial@nongnu.org
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
cppcheck report:
hw/ac97.c:1004: style:
Variable 'written' is assigned a value that is never used
hw/ac97.c:1072: style:
Variable 'written' is assigned a value that is never used
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
The code changed here is an unused data type name (evt_flush_occurred).
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Prevent a deadlock caused by leaving a map cache bucket locked by the
preceding qemu_get_ram_ptr() call.
Signed-off-By: John Baboval <john.baboval@virtualcomputer.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
On IA32 host or IA32 PAE host, at present, generally, we can't create
an HVM guest with more than 2G memory, because generally it's almost
impossible for Qemu to find a large enough and consecutive virtual
address space to map an HVM guest's whole physical address space.
The attached patch fixes this issue using dynamic mapping based on
little blocks of memory.
Each call to qemu_get_ram_ptr makes a call to qemu_map_cache with the
lock option, so mapcache will not unmap these ram_ptr.
Blocks that do not belong to the RAM, but usually to a device ROM or to
a framebuffer, are handled in a separate function. So the whole RAMBlock
can be map.
Signed-off-by: Jun Nakajima <jun.nakajima@intel.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Every set_irq call makes a Xen hypercall.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch introduces Xen specific call in piix_pci.
The specific part for Xen is in write_config, set_irq and get_pirq.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
This is because there is not synchronisation of the vcpu register
between Xen and QEMU, so vmport can't work properly.
This patch introduces no_vmport parameter to pc_basic_device_init.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Introduce the Xen FV (Fully Virtualized) machine to Qemu, some more Xen
specific call will be added in further patches.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch moves above_4g_mem_size and below_4g_mem_size calculation in
the caller of pc_memory_init (pc_init1). And the prototype of
pc_memory_init is changed because there is no need anymore to have
variable pointer and the ram_size parameter.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Aurelien Jarno