Commit Graph

586 Commits (711c21280b2cb56060859cc574221a8bf40f908a)

Author SHA1 Message Date
Anthony Liguori 711c21280b Merge remote-tracking branch 'stefanha/trivial-patches' into staging
Conflicts:
	cpu-all.h
2011-05-12 08:08:12 -05:00
Richard Henderson ce0c6930cc target-mips: Do not check CPU_INTERRUPT_TIMER.
This bit is never set, therefore we should not read it either.

Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-05-08 16:55:23 +00:00
Stefan Weil ff2712ba89 Fix typos in comments (interupt -> interrupt)
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-05-08 10:02:17 +01:00
Stefan Weil ebabb67a17 Fix typo in code and comments
Replace writeable -> writable

Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-05-06 08:19:25 +01:00
Stefan Weil 618ba8e6a1 Remove unused function parameter from cpu_restore_state
The previous patch removed the need for parameter puc.
Is is now unused, so remove it.

Cc: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
2011-04-20 10:37:03 +02:00
Stefan Weil e87b7cb0f0 Remove unused function parameters from gen_pc_load and rename the function
Function gen_pc_load was introduced in commit
d2856f1ad4.
The only reason for parameter searched_pc was
a debug statement in target-i386/translate.c.

Parameter puc was needed by target-sparc until
commit d7da2a1040.

Remove searched_pc from the debug statement and remove both
parameters from the parameter list of gen_pc_load.

As the function name gen_pc_load was also misleading,
it is now called restore_state_to_opc. This new name
was suggested by Peter Maydell, thanks.

v2: Remove last parameter, too, and rename the function.

v3: Fix [] typo in target-arm/translate.c.
    Fix wrong SHA1 object name in commit message (copy+paste error).

Cc: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
2011-04-20 10:33:59 +02:00
Aurelien Jarno 6a385343e4 target-mips: clear softfpu exception state for comparison instructions
MIPS FPU instructions should start with a clean softfpu status. This
is done for the most instructions, but not for comparison ones.

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-04-17 20:32:15 +02:00
Aurelien Jarno 30a00bc142 target-mips: fix c.ps.* instructions
Contrary to cabs.ps.* instructions, c.ps.* should not compare the absolute
value of the operand, but directly the operands.

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-04-17 20:32:15 +02:00
Aurelien Jarno 353ebb7ac2 target-mips: don't hardcode softfloat exception bits
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-04-17 20:32:15 +02:00
Aurelien Jarno 06a0e6b104 target-mips: simplify FP comparisons
As the softfloat comparison functions already test for NaN, there is no
need to always call the float*_unordered*() functions.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-04-17 20:32:15 +02:00
Aurelien Jarno 211315fb5e softfloat: rename float*_eq() into float*_eq_quiet()
float*_eq functions have a different semantics than other comparison
functions. Fix that by first renaming float*_quiet() into float*_eq_quiet().

Note that it is purely mechanical, and the behaviour should be unchanged.
That said it clearly highlight problems due to this different semantics,
they are fixed later in this patch series.

Cc: Alexander Graf <agraf@suse.de>
Acked-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-04-17 20:32:14 +02:00
Aurelien Jarno 3a59938359 target-mips: use new float*_unordered*() functions
Use the new float*_unordered*() functions from softfloat instead of
redefining a private version.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-04-17 20:32:14 +02:00
Stefan Weil 4b4a72e556 Fix conversions from pointer to tcg_target_long
tcg_gen_exit_tb takes a parameter of type tcg_target_long,
so the type casts of pointer to long should be replaced by
type casts of pointer to tcg_target_long (suggested by Blue Swirl).

These changes are needed for build environments where
sizeof(long) != sizeof(void *), especially for w64.

Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-04-10 00:45:16 +02:00
Stefan Weil 4ff9786c67 Fix trivial "endianness bugs"
Replace endianess -> endianness.

Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-04-03 21:42:57 +02:00
Paolo Bonzini eda48c344f inline cpu_halted into sole caller
All implementations are now the same, and there is only one caller,
so inline the function there.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-03-13 14:44:21 +00:00
Chris Dearman efd410373a [PATCH] [MIPS] Clear softfpu exception state for round, trunc, ceil and floor
MIPS FPU instructions should start with a clean softfpu status. This
is done for the arithmetic operations and cvt instructions, but not
for round, trunc, ceil and floor.

Signed-off-by: Chris Dearman <chris@mips.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-02-09 19:45:24 +01:00
Aurelien Jarno b835e919f0 target-mips: fix save_cpu_state() calls
The rule is:
- don't save PC if the exception is only triggered by softmmu.
- save PC if the exception can be triggered by an helper.

Fix a 64-bit kernel crash when loading modules.

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-01-24 20:52:04 +01:00
Edgar E. Iglesias 5580722456 mips: Break TBs after mfc0_count
Break the TB after reading the count register. This makes it
possible to take timer interrupts immediately after a read of
a possibly expired timer.

Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2011-01-18 12:32:46 +01:00
Peter Maydell 185698715d softfloat: Rename float*_is_nan() functions to float*_is_quiet_nan()
The softfloat functions float*_is_nan() were badly misnamed,
because they return true only for quiet NaNs, not for all NaNs.
Rename them to float*_is_quiet_nan() to more accurately reflect
what they do.

This change was produced by:
 perl -p -i -e 's/_is_nan/_is_quiet_nan/g' $(git grep -l is_nan)
(with the results manually checked.)

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Nathan Froyd <froydnj@codesourcery.com>
Acked-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-01-02 11:15:25 +01:00
Aurelien Jarno 4cdc1cd137 target-mips: fix host CPU consumption when guest is idle
When the CPU is in wait state, do not wake-up if an interrupt can't be
taken. This avoid host CPU running at 100% if a device (e.g. timer) has
an interrupt line left enabled.

Also factorize code to check if interrupts are enabled in
cpu_mips_hw_interrupts_pending().

Based on a patch from Edgar E. Iglesias <edgar.iglesias@gmail.com>

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Acked-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2010-12-27 00:58:06 +01:00
Nathan Froyd 9ed5726c04 target-mips: fix translation of MT instructions
The translation of dmt/emt/dvpe/evpe was doing the moral equivalent of:

  int x;
  ...		/* no initialization of x */
  x = f (x);

which confused later bits of TCG rather badly, leading to crashes.

Fix the helpers to only return results (those instructions have no
inputs), and fix the translation code accordingly.

Signed-off-by: Nathan Froyd <froydnj@codesourcery.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-12-22 11:14:10 +01:00
Stefan Weil 9a78eead0c target-xxx: Use fprintf_function (format checking)
fprintf_function uses format checking with GCC_FMT_ATTR.

Format errors were fixed in
* target-i386/helper.c
* target-mips/translate.c
* target-ppc/translate.c

Cc: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-10-30 08:01:59 +00:00
Blue Swirl 2abf314ddd mips: avoid write only variables
Compiling with GCC 4.6.0 20100925 produced a lot of warnings like:
/src/qemu/target-mips/translate.c: In function 'gen_ld':
/src/qemu/target-mips/translate.c:1039:17: error: variable 'opn' set but not used [-Werror=unused-but-set-variable]

Fix by adding a dummy cast so that the variable is not unused.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-10-13 18:43:21 +00:00
Blue Swirl 1c7242da85 MIPS: fix yield handling
The parameter for yield should be handled as a signed integer
for the comparisons to have any effect.

This also avoids a gcc warning with -Wtype-limits.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-09-18 05:53:15 +00:00
Edgar E. Iglesias 138afb024b mips: Add support for VInt and VEIC irq modes
Signed-off-by: Edgar E. Iglesias <edgar@axis.com>
2010-08-06 12:21:16 +02:00
Hervé Poussineau 671b0f368b Correctly identify multiple cpus in SMP systems
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-07-31 17:14:52 +02:00
Hervé Poussineau cf7c00d5c6 Remove unused constant
Remove unused constant MIPS_FCR0

Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-07-31 17:14:51 +02:00
Aurelien Jarno 5dc5d9f055 mips: more fixes to the MIPS interrupt glue logic
Commit 36388314fe moved most of the
interrupt logic to cpu-exec.c. Remove the remaining useless code
and fix software interrupts.

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Acked-by: Edgar E. Iglesias <edgar@axis.com>
Tested-by: Edgar E. Iglesias <edgar@axis.com>
2010-07-25 16:54:02 +02:00
Edgar E. Iglesias 36388314fe mips: Correct MIPS interrupt glue logic for icount
When hw interrupt pending bits in CP0_Cause are set, the CPU should
see the hw interrupt line as active. The CPU may or may not take the
interrupt based on internal state (global irq mask etc) but the glue
logic shouldn't care.

This fixes MIPS external hw interrupts in combination with -icount.

Signed-off-by: Edgar E. Iglesias <edgar@axis.com>
2010-07-24 13:40:05 +02:00
Aurelien Jarno 3fc00a7bde target-mips: fix xtlb exception for loongson
Loongson 2E and 2F use the same entry for xtlb and tlb exception, at
offset 0x000.

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-07-17 16:13:12 +02:00
Aurelien Jarno 161f85e6b1 target-mips: add loongson 2E & 2F integer instructions
This patch adds support for loongson 2E & 2F instructions. They are the
same instructions, but differ by the opcode encoding.

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-07-11 10:24:31 +02:00
Paolo Bonzini a88790a14f remove exec-all.h inclusion from cpu.h
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-07-03 09:48:24 +03:00
Paolo Bonzini 10eb0cc03c move cpu_pc_from_tb to target-*/exec.h
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-07-03 09:48:12 +03:00
Paolo Bonzini 83dae09588 remove unused stuff from */exec.h
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-07-03 06:47:13 +00:00
Aurelien Jarno afa88c3ae5 target-mips: add Loongson support prefetch
Loongson CPU uses a load to zero register for prefetch.
Emulate it as a NOP.

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-07-01 23:45:28 +02:00
Aurelien Jarno 5c13fdfd03 target-mips: split load and store
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-07-01 07:48:17 +02:00
Aurelien Jarno 6fbab86925 target-mips: fix DINSU instruction
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-30 20:00:31 +02:00
Aurelien Jarno aa8f40090a target-mips: enable movn/movz on loongson 2E & 2F
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-29 23:26:34 +02:00
Huacai Chen 5bc6fba851 MIPS: Initial support of fulong mini pc (CPU definition)
Signed-off-by: Huacai Chen <zltjiangshi@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-29 23:07:52 +02:00
Stefan Weil 3308759844 target-mips: Fix compilation
TCGv t1 needs tcg_temp_free instead of tcg_temp_free_i32.

Cc: Nathan Froyd <froydnj@codesourcery.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-09 23:37:36 +02:00
Nathan Froyd bbfa8f72e9 target-mips: add microMIPS exception handler support
Unlike MIPS16, microMIPS lets you choose the ISA mode for your exception
handlers.  The ISA mode is selectable via a user-writable CP0.Config3
flag.

Signed-off-by: Nathan Froyd <froydnj@codesourcery.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-09 16:10:51 +02:00
Nathan Froyd 3c824109da target-mips: microMIPS ASE support
Add instruction decoding for the microMIPS ASE.  All we do is decode and
then forward to the existing gen_* routines.

Signed-off-by: Nathan Froyd <froydnj@codesourcery.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-09 16:10:50 +02:00
Nathan Froyd 620e48f663 target-mips: mips16 cleanups
Change code handling mips16-specific branches to use ISA-neutral special
opcodes.  Since there are several places where the delay slot
requirements for microMIPS branches differ from mips16 branches, using
opcodes is easier than checking hflags, then checking mips16
vs. microMIPS.

Signed-off-by: Nathan Froyd <froydnj@codesourcery.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-09 16:10:50 +02:00
Nathan Froyd 8153667c71 target-mips: refactor c{, abs}.cond.fmt insns
Move all knowledge about coprocessor-checking and register numbering
into the gen_cmp* helper functions.

Signed-off-by: Nathan Froyd <froydnj@codesourcery.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-09 16:10:50 +02:00
Aurelien Jarno e459440a89 target-mips: move FP FMT comments closer to the definitions
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-09 16:10:50 +02:00
Nathan Froyd bf4120adaa target-mips: define constants for magic numbers
Add FMT_* constants for the floating-point format field in opcodes and
tweak a few places to use them.  Add enums for various invocations of
FOP and tweak gen_farith and its lone caller accordingly.

Signed-off-by: Nathan Froyd <froydnj@codesourcery.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-09 16:10:50 +02:00
Nathan Froyd 26ebe46848 target-mips: break out [ls][wd]c1 and rdhwr insn generation
Signed-off-by: Nathan Froyd <froydnj@codesourcery.com>
Acked-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-08 19:15:08 +02:00
Richard Henderson 564856bb97 target-mips: Remove duplicate CPU log.
Logging for -d cpu is done in generic code.

Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-05-05 12:20:05 +02:00
Stefan Weil 2a5612e6a3 target-mips: Fix format specifiers for fpu_fprintf
In the previous patch which introduced fprintf_function to
allow parameter checking by gcc some compiler warnings
remained unfixed.

These warnings are fixed here.

Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-04-09 21:53:23 +02:00
Stefan Weil a7200c9f98 target-mips: Fix one more format specifier for cpu_fprintf
env->bcond must be printed using TARGET_FMT_ld.

Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-04-08 21:46:57 +02:00