The virtio config area in PIO space is a bit special. The initial
header is little endian but the rest (device specific) is guest
native endian.
The PIO accessors for PCI on machines that don't have native IO ports
assume that all PIO is little endian, which works fine for everything
except the above.
A complicated way to fix it would be to split the BAR into two memory
regions with different endianess settings, but this isn't practical
to do, besides, the PIO code doesn't honor region endianness anyway
(I have a patch for that too but it isn't necessary at this stage).
So I decided to go for the quick fix instead which consists of
reverting the swap in virtio-pci in selected places, hoping that when
we eventually do a "v2" of the virtio protocols, we sort that out once
and for all using a fixed endian setting for everything.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
[agraf: keep virtio in libhw and determine endianness through a
helper function in exec.c]
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Now that we have the SoC init function in the same file, let's integrate
it with the board initialization.
While at it, also make use of the newly qdev'ified PCI host controller.
Signed-off-by: Alexander Graf <agraf@suse.de>
The separation of ppc440 and ppc440_bamboo makes some sense, since ppc440
is the SoC while ppc440_bamboo is the actual board. But the separation
makes things harder for us for no good reason, so let's just fold them
in together with each other.
Signed-off-by: Alexander Graf <agraf@suse.de>
Due to popular demand, this qdevifies the PCI host controller of 4xx SoCs
the same way as e500.
We have to introduce a small stub function for pci init that will be
removed in a later patch, once we qdev'ified the board, to keep the build
working.
Signed-off-by: Alexander Graf <agraf@suse.de>
Today we're exposing a Virtex 440 CPU to the guest despite the fact
that we're telling the guest that we're running on a 440EP one in the
device tree.
So let's better default to a real 440EP to make things synced again.
Signed-off-by: Alexander Graf <agraf@suse.de>
When running a 440 target, we currently get invalid irq_num values (-1)
which completely confuse the IRQ setting code.
This is most likely due to the missing qdev conversion.
While this shouldn't happen in the first place and should really rather
be fixed by converting the target, I dislike segfaults. So for now, let's
just print a warning and ignore invalid irq_num values.
Signed-off-by: Alexander Graf <agraf@suse.de>
Back in the day when the bamboo target got introduced, the initial TLB was
dictated by KVM. TCG has been missing initial TLB values ever since, rendering
the target unusable for TCG usage.
This patch adds linear TLB maps the way Linux expects them, making the target
work.
Signed-off-by: Alexander Graf <agraf@suse.de>
To be able to support CPU reset, we need to put all register initialization
and initial state into a CPU reset hook instead of a function that is only
called once on bootup.
This is a preparation step for the initial TLB setting code and brings bamboo
more in line with what e500 and virtex already do.
Signed-off-by: Alexander Graf <agraf@suse.de>
When using TCG with a BookE PowerPC core, we need to explicitly initialize
the BookE timers with the correct frequencies.
This was missing for 440EP, since that code came from KVM and was never used
with TCG.
Signed-off-by: Alexander Graf <agraf@suse.de>
* stefanha/trivial-patches:
Makefile: Remove generated headers on clean
Makefile: Exclude tests/Makefile in unconfigured tree
lm32: Fix mixup of uint32 and uint32_t
tests: Silence gtester in Makefile
qemu-tool: Fix mixup of int64 and int64_t
* pmaydell/arm-devs.for-upstream:
arm: make the number of GIC interrupts configurable
hw/lan9118: Add save/load support
arm: Remove incorrect comment in arm_timer
vexpress, realview: Add (dummy) L2 cache controller
* kraxel/usb.37:
usb-redir: Improve some debugging messages
usb-redir: Try to keep our buffer size near the target size
usb-redir: Pre-fill our isoc input buffer before sending pkts to the host
usb-redir: Dynamically adjust iso buffering size based on ep interval
usb-redir: Clear iso / irq error when stopping the stream
usb: link packets to endpoints not devices
usb: add max_packet_size to USBEndpoint
usb/debug: add usb_ep_dump
usb-desc: USBEndpoint support
usb: add ifnum to USBEndpoint
usb: add USBEndpoint
xhci: Initial xHCI implementation
usb: add audio device model
usb-desc: audio endpoint support
usb: track altsetting in USBDevice
usb: track configuration and interface count in USBDevice.
usb-host: rip out legacy procfs support
Commit d23948b15a (lm32: add Milkymist
VGAFB support) introduced a stray usage of the softfloat uint32 type.
Use uint32_t instead.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Michael Walle <michael@walle.cc>
Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Increase the maximum number of GIC interrupts for a9mp and a11mp to 1020,
and create a configurable property for each defaulting to 96 and 64
(respectively) so that device modelers can set the value appropriately
for their SoC. Other ARM processors also set their maximum number of
used IRQs appropriately.
Set the maximum theoretical number of GIC interrupts to 1020 and
update the save/restore code to only use the appropriate number for
each SoC.
Signed-off-by: Mark Langsdorf <mark.langsdorf@calxeda.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
[Peter Maydell: fixed minor whitespace snafu]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The current comment says that the arm_timers are restricted to between
32 KHz and 1 MHz, but sp804 TRM does not specify those limits.
Signed-off-by: Mark Langsdorf <mark.langsdorf@calxeda.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Instantiate the L2 cache controller on the ARM devboards which have one,
since we have a dummy model of it now. Note that the only non-MP board
with an L2x0 is the PB1176, which we don't model.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add USBEndpoint for the control endpoint to USBDevices. Link async
packets to the USBEndpoint instead of the USBDevice.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Start maintaining endpoint state at USBDevice level. Add USBEndpoint
struct and some helper functions to deal with it. For now it contains
the endpoint type only. Moved over some bits from usb-linux.c
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Based on the implementation from Hector Martin <hector@marcansoft.com>
Hectors's implementation completely sidestepped the qemu usb system and
used libusb directly for usb device pass through. So I've ripped out
the libusb bits (or left them in disabled, as reference for further
coding) and hooked up the qemu subsystem instead. That work is not
complete yet though, partly due to limitations of the qemu usb
subsystem. Nevertheless I think it is better to continue development
in-tree, especially as the qemu usb bits need a bunch of improvements
too for decent usb 3.0 support.
Current state:
- usb-storage emulation should work ok.
- Devices which need constant polling (HID emulation like usb-tablet)
are known to not work.
- ISO xfers are not implemented yet.
- superspeed ports are not implemented yet.
- usb pass-through is completely untested so far.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The secondary CPU bootloader in arm_boot.c holds secondary CPUs in a
pen until the primary CPU releases them. Make boards specify the
address to be polled to determine whether to leave the pen (it was
previously hardcoded to 0x10000030, which is a Versatile Express/
Realview specific system register address).
Signed-off-by: Evgeny Voevodin <e.voevodin@samsung.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
u-boot uses single automatic scans and polling in
pxa2xx_keypad driver, so clear KPC_AS bit immediately
and update keys state even if KPC_AS and KPC_ASACT are
cleared.
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
Pallete entry size for 16bpp format is 2 bytes, not 4
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
Obviously, linking the RTC device state to the PIIX does not belong into
the common path that is shared with the isapc.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
All files under GPLv2 will get GPLv2+ changes starting tomorrow.
event_notifier.c and exec-obsolete.h were only ever touched by Red Hat
employees and can be relicensed now.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
qdev is now equipped (thanks to the last commit) to disassociate
chardevs from the qdev devices on the devices going away. So doing it
in the virtio-console driver is not necessary.
Since that was the only thing being done in the qdev exit method, drop
it entirely.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
When a device is removed, remove the association with a chardev, if any,
so that the chardev can be re-used later for other devices.
Reported-by: Qunfang Zhang <qzhang@redhat.com>
Fix-suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
QEMU does have a "scsi" option (to be used like -device
virtio-blk-pci,drive=foo,scsi=off). However, it only
masks the feature bit, and does not reject the command
if a malicious guest disregards the feature bits and
issues a request.
Without this patch, using scsi=off does not protect you
from CVE-2011-4127.
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
When an rtc interrupt is reinjected immediately after being acked,
other interrupts should not be reinjected, so do clear their bits.
Also, if the periodic interrupts have been disabled before acking,
do not reinject, as the guest might get very confused!
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Hours in 12-hour mode are in the 1-12 range, not 0-11.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Commit 8eb0283 broken device_del by having too overzealous reference counting
checks. Move the reference count checks to qdev_free(), make sure to remove
the parent link on free, and decrement the reference count on property removal.
Reported-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
These comments are used by static code analysis tools and in code reviews
to avoid false warnings because of missing break statements.
The case statements handled here were reported by coverity.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
The RFBI_READ/RFBI_STATUS code incorrectly uses chip[0] when it should
be using chip[1]. Andrzej Zaborowski <balrog@zabor.org> confirmed this
bug since I don't know this code well.
Reported-by: Dr David Alan Gilbert <davidagilbert@uk.ibm.com>
Reviewed-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
This brings a usb audio device to qemu. Output only, fixed at
16bit stereo @ 480000 Hz. Based on a patch from
H. Peter Anvin <hpa@linux.intel.com>
Usage: add '-device usb-audio' to your qemu command line.
Works sorta ok on a idle machine. Known issues:
* Is *very* sensitive to latencies.
* Burns quite some CPU due to usb polling.
In short: It brings the qemu usb emulation to its limits. Enjoy!
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add support for audio endpoints which have two more fields in the
descriptor. Also add support for extra class specific endpoint
descriptors.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Benjamin Herrenschmidt