Add the open, openat and close system calls. We need to lock paths, so
implmenent that as well.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Jung-uk Kim <jkim@FreeBSD.org>
Signed-off-by: Kyle Evans <kevans@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Implement the exit system call. Bring in bsd-proc.h to contain all the
process system call implementation and helper routines.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Kyle Evans <kevans@FreeBSD.org>
Implement write, writev, pwrite and pwritev and connect them to the
system call dispatch routine.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Kyle Evans <kevans@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Implement do_bsd_{read,pread,readv,preadv}. Connect them to the system
call table.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Kyle Evans <kevans@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Add in the tracing and this system call not implemented boilerplate. Do
this by moving the guts of do_freebsd_syscall to freebsd_syscall. Put
the tracing in the wrapper function. Since freebsd_syscall is a
singleton static function, it will almost certainly be inlined. Fix
comments that referred to do_syscall since that was renamed some tie
ago.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Releases the references to the iovec created by lock_iovec.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
lock_iovec will lock an I/O vec and the memory to which it refers and
create a iovec in the host space that refers to it, with full error
unwinding. Add helper_iovec_unlock to unlock the partially locked iovec
in case there's an error. The code will be used in iovec_unlock when
that is committed.
Note: memory handling likely could be rewritten to use q_autofree. That
will be explored in the future since what we have now works well enough.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Cleaned up with scripts/clean-header-guards.pl.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20220506134911.2856099-5-armbru@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Leading underscores are ill-advised because such identifiers are
reserved. Trailing underscores are merely ugly. Strip both.
Our header guards commonly end in _H. Normalize the exceptions.
Macros should be ALL_CAPS. Normalize the exception.
Done with scripts/clean-header-guards.pl.
include/hw/xen/interface/ and tools/virtiofsd/ left alone, because
these were imported from Xen and libfuse respectively.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20220506134911.2856099-3-armbru@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Header guard symbols should match their file name to make guard
collisions less likely.
Cleaned up with scripts/clean-header-guards.pl, followed by some
renaming of new guard symbols picked by the script to better ones.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20220506134911.2856099-2-armbru@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
[Change to generated file ebpf/rss.bpf.skeleton.h backed out]
G_NORETURN was introduced in glib 2.68, fallback to G_GNUC_NORETURN in
glib-compat.
Note that this attribute must be placed before the function declaration
(bringing a bit of consistency in qemu codebase usage).
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Message-Id: <20220420132624.2439741-20-marcandre.lureau@redhat.com>
This header only defines the tcg_allowed variable and the tcg_enabled()
function - which are not required in many files that include this
header. Drop the #include statement there.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20220315144107.1012530-1-thuth@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Perform all logfile setup in one step.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-29-richard.henderson@linaro.org>
We have extra stuff to log at the same time.
Hoist the qemu_log_trylock/unlock to the caller and use fprintf.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-22-richard.henderson@linaro.org>
Do not force exit within qemu_set_log; return bool and pass
an Error value back up the stack as per usual.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-5-richard.henderson@linaro.org>
This buffering was introduced during the Paleozoic: 9fa3e85353.
There has never been an explanation as to why we may not allow
glibc to allocate the file buffer itself. We certainly have
many other uses of mmap and malloc during user-only startup,
so presumably whatever the issue was, it has been fixed during
the preceeding 18 years.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-2-richard.henderson@linaro.org>
Replace the global variables with inlined helper functions. getpagesize() is very
likely annotated with a "const" function attribute (at least with glibc), and thus
optimization should apply even better.
This avoids the need for a constructor initialization too.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220323155743.1585078-12-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert the TARGET_WORDS_BIGENDIAN macro, similarly to what was done
with HOST_BIG_ENDIAN. The new TARGET_BIG_ENDIAN macro is either 0 or 1,
and thus should always be defined to prevent misuse.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Suggested-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220323155743.1585078-8-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
One less qemu-specific macro. It also helps to make some headers/units
only depend on glib, and thus moved in standalone projects eventually.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Richard W.M. Jones <rjones@redhat.com>
Add a series of macros to create system call macros that go via the
safe_syscall path.
Signed-off-by: Kyle Evans <kevans@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
target_arg64 is a generic way to extract 64-bits from a pair of
arguments. On 32-bit platforms, it returns them joined together as
appropriate. On 64-bit platforms, it returns the first arg because it's
already 64-bits.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Kyle Evans <kevans@FreeBSD.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Create target.h. This file is intended to be simple and describe basic
things about the architecture. If something is a basic feature of the
architecture, it belongs here. Should we need something that's per-BSD
there will be a target-os.h that will live in the per-bsd directories.
Define regpairs_aligned to reflect whether or not registers are 'paired'
for 64-bit arguments or not. This will be false for all 64-bit targets,
and will be true on those architectures that pair (currently just armv7
and powerpc on FreeBSD 14.x).
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Kyle Evans <kevans@FreeBSD.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
An include file that pulls in all the definitions needed for the file
related system calls. This also includes the host definitions to
implement the system calls and some helper routines to lock/unlock
different aspects of the system call arguments.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Add the helper functions get_errno and host_to_target_errno. get_errno
returns either the system call results, or the -errno when system call
indicates failure by returning -1. Host_to_target_errno returns errno
(since on FreeBSD they are the same on all architectures) along with a
comment about why it's the identity.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Kyle Evans <kevans@FreeBSD.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
While there is some commonality between *BSD syscall processing, there's
a number of differences and the system call numbers and ABIs have been
independent since the late 90s. Move FreeBSD's proessing here and delete
it.
The upstream implementation is somewhat different than the current
implementation. It will be much easier to upstream these from scratch,
justifying the final result, rather than working out the diffs and
justifying the changes. Also tweak a comment to qemu standard form.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Kyle Evans <kevans@FreeBSD.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Remove keeping track of which type of bsd we're running on. It's no
longer referenced in the code. Building bsd-user on NetBSD or OpenBSD
isn't possible, let alone running that code. Stop pretending that we can
do the cross BSD thing since there's been a large divergence since 2000
that makes this nearly impossible between FreeBSD and {Net,Open}BSD and
at least quite difficult between NetBSD and OpenBSD.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Kyle Evans <kevans@FreeBSD.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Since we can't run on anything else, assume for the moment that this is
a FreeBSD target. In the future, we'll need to handle this properly via
some include file in bsd-user/*bsd/x86_64/mumble.h. There's a number of
other diffs that would be needed to make things work on OtherBSD, so it
doesn't make sense to preseve this one detail today.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Kyle Evans <kevans@FreeBSD.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Since we can't run on anything else, assume for the moment that this is
a FreeBSD target. In the future, we'll need to handle this properly
via some include file in bsd-user/*bsd/arm/mumble.h. There's a number
of other diffs that would be needed to make things work on OtherBSD,
so it doesn't make sense to preseve this one detail today.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Kyle Evans <kevans@FreeBSD.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Since we don't build on OpenBSD, only do FreeBSD system calls here. In
the future, we'll need to move this to some place like
bsd-user/freebsd/arm/mumble.h, but until then just leave this
inline. This reflects changes to the upstream.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Kyle Evans <kevans@FreeBSD.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
This doesn't build on openbsd at the moment, and this could
should arguably be in bsd-user/*bsd/i386 somewhere. Until
we refactor to support OpenBSD/NetBSD again, drop it here.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Kyle Evans <kevans@FreeBSD.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
This doesn't build on openbsd at the moment, and this could
should arguably be in bsd-user/*bsd/x86_64 somewhere. Until
we refactor to support OpenBSD/NetBSD again, drop it here.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Kyle Evans <kevans@FreeBSD.org>
Although initial versions of NetBSD did use int $80, it was replaced by
syscall before any releases. OpenBSD and FreeBSD always did syscall.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Kyle Evans <kevans@FreeBSD.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
We've not realistically been able to actually run any bsd program on any
other bsd program. They are too diverged to do this easily. The current
code is setup to do it, but implementing it is hard. Stop pretending
that we can do this.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Many files use "qemu/log.h" declarations but neglect to include
it (they inherit it via "exec/exec-all.h"). "exec/exec-all.h" is
a core component and shouldn't be used that way. Move the
"qemu/log.h" inclusion locally to each unit requiring it.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220207082756.82600-10-f4bug@amsat.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The capsicum signal stuff is new with FreeBSD 14, rev 1400026, so only
define QEMU_SI_CAPSICUM there. Only copy _capsicum when QEMU_SI_CAPSICUM
is defined. Default to no info being passed for signals we make no guess
about.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Rename the parameter name for target_cpu_reset's CPUArchState * arg from
cpu to env.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Implement the meat of the sigaltstack(2) system call with do_sigaltstack.
With that, all the stubbed out routines are complete, so remove
now-incorrect comment.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Kyle Evans <kevans@freebsd.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Implement the meat of the sigaction(2) system call with do_sigaction and
helper routiner block_signals (which is also used to implemement signal
masking so it's global).
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Kyle Evans <kevans@freebsd.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Implements the meat of a sigreturn(2) system call via do_sigreturn, and
helper reset_signal_mask. Fix the prototype of do_sigreturn in qemu.h
and remove do_rt_sigreturn since it's linux only.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Kyle Evans <kevans@freebsd.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Process the currently queued signals.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Kyle Evans <kevans@freebsd.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Convert siginfo from targer to host.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Kyle Evans <kevans@freebsd.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Handle a queued signal.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Kyle Evans <kevans@freebsd.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
setup_frame sets up a signalled stack frame. Associated routines to
extract the pointer to the stack frame and to support alternate stacks.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Kyle Evans <kevans@freebsd.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
target_sigemptyset: resets a set to having no bits set
target_sigaddset: adds a signal to a set
target_sigismember: returns true when signal is a member
host_to_target_sigset_internal: convert host sigset to target
host_to_target_sigset: convert host sigset to target
target_to_host_sigset_internal: convert target sigset to host
target_to_host_sigset: convert target sigset to host
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Kyle Evans <kevans@freebsd.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Fill in queue signal implementation, as well as routines allocate and
delete elements of the signal queue.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Kyle Evans <kevans@freebsd.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Force delivering a signal and generating a core file. It's a global
function for the moment...
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Kyle Evans <kevans@freebsd.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
print_taken_signal() prints signals when we're tracing signals.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Kyle Evans <kevans@freebsd.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Implement host_signal_handler to handle signals generated by the host
and to do safe system calls.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Kyle Evans <kevans@freebsd.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Implement conversion of host to target siginfo.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Kyle Evans <kevans@freebsd.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Add the bsd-user specific events and infrastructure. Only include the
linux-user trace events for linux-user, not bsd-user.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Kyle Evans <kevans@freebsd.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Start to add the host signal functionality to the build.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Implement host_signal_pc, host_signal_set_pc and host_signal_write for
x86_64.
Signed-off-by: Kyle Evans <kevans@freebsd.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Implement host_signal_pc, host_signal_set_pc and host_signal_write for
i386.
Signed-off-by: Kyle Evans <kevans@freebsd.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Implement host_signal_pc, host_signal_set_pc and host_signal_write for
arm.
Signed-off-by: Kyle Evans <kevans@freebsd.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Mirror the linux-user practice and add a si_type argument to queue
signal. This will be transported as the upper 8 bits in the si_type
element of siginfo so that we know what bits of the structure are valid
and so we can properly implement host_to_target_siginfo_noswap and
tswap_siginfo. Adapt the one caller of queue_signal to the new
interface. Use all the same names as Linux (except _RT which we don't
treat differently, unlike Linux), though some are unused. Place this
into signal-common.h since that's a better place given bsd-user's
structure. Move prototype of queue_signal to signal-common.h to mirror
linux-user's location.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Initialize the signal state for the emulator. Setup a set of sane
default signal handlers, mirroring the host's signals. For fatal signals
(those that exit by default), establish our own set of signal
handlers. Stub out the actual signal handler we use for the moment.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Kyle Evans <kevans@freebsd.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org> XXX SIGPROF PENDING
Implement host_to_target_signal and target_to_host_signal.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Kyle Evans <kevans@freebsd.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Update for the richer set of data faults that are now possible. Copied
largely from linux-user/arm/cpu_loop.c, with minor typo fixes.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Use force_sig_fault to implement unknown opcode. This just uninlines
that function, so simplify things by using it. Fold in EXCP_NOCP and
EXCP_INVSTATE, as is done in linux-user. Make a note about slight
differences with FreeBSD in case any of them turn out to be important
later.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
The code has moved in FreeBSD since the emulator was started, update the
comment to reflect that change.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Implement EXCP_DEBUG and EXCP_BKPT the same, as is done in
linux-user. The prior adjustment of register 15 isn't needed, so remove
that. Remove a redunant comment (that code in FreeBSD never handled
break points). It's unclear why BKPT was an alias for system calls,
but FreeBSD doesn't do that today.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
First attempt at implementing cpu_loop_exit_sigbus, mostly copied from
linux-user version of this function.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Kyle Evans <kevans@freebsd.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
First attempt at implementing cpu_loop_exit_sigsegv, mostly copied from
linux-user version of this function.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Kyle Evans <kevans@freebsd.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Start to implement the force_sig_fault code. This currently just calls
queue_signal(). The bsd-user fork version of that will handle this the
synchronous nature of this call. Add signal-common.h to hold signal
helper functions like force_sig_fault.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Kyle Evans <kevans@freebsd.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Move the EXCP_ATOMIC case to match linux-user/arm/cpu_loop.c:cpu_loop
ordering.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
This is currently unused, so no code adjustments are needed.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
bsd-user was copied from linux-user at a time when it queued
signals. Remove those vestiges of thse code. Retain the init function,
even though it's now empty since other stuff will likely be added
there. Make it static since it's not called from outside of main.c
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
FreeBSD's get_mcontext doesn't return any vfp data. Instead, it zeros
out the vfp feilds (and all the spare fields). Impelement this
behavior. We're still missing the sysarch(ARM_GET_VFPCONTEXT) syscall,
though.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Fix the broken context setting for arm. FreeBSD's get_mcontext does not
fill in the vfp info. It's filled in in sigframe(). This corresponds to
the new setup_sigframe_arch which fills in mcontext, then adjusts it to
point to the vfp context in the sigframe and fills in that context as
well. Add pointer to where this code is done.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Define setup_sigframe_arch whose job it is to setup the mcontext for the
sigframe. Implement for x86 to just call mcontext.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Fill in the missing FreeBSD siginfo fields, and add some comments.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Avoid polluting the compilation of common-user/ with local include files;
making an include file available to common-user/ should be a deliberate
decision in order to keep a clear interface that can be used by both
bsd-user/ and linux-user/.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that all architecutres define TARGET_[MU]CONTEXT_SIZE, enforce
requiring them and always check the sizeof target_{u,m}context_t
sizes.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Update ucontext to implement sigreturn.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Move the machine context to the CPU state.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Kyle Evans <kevans@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Get the machine context from the CPU state.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Kyle Evans <kevans@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Implement set_sigtramp_args to setup the arguments to the sigtramp
calls.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Define the native sizes of mcontext_t and ucontext_t so that the tests
in target_os_ucontext.h ensure the size of arm's version of these
structures is correct.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Defines for registers and stack layout related to signals.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Kyle Evans <kevans@FreeBSD.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Implement get_elf_hwcap to get the first word of hardware capabilities.
Signed-off-by: Kyle Evans <kevans@FreeBSD.org>
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Kyle Evans <kevans@FreeBSD.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Basic set of defines needed for arm ELF file activation.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Kyle Evans <kevans@FreeBSD.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Implement target_thread_init (to create a thread) and target_set_upcall
(to switch to a thread) for arm.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Kyle Evans <kevans@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Kyle Evans <kevans@FreeBSD.org>
Copy of the signal trampoline code for arm, as well as setup_sigtramp to
write it to the stack.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Kyle Evans <kevans@FreeBSD.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Various parameters describing the layout of the ARM address space. In
addition, define routines to get the stack pointer and to set the second
return value.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Kyle Evans <kevans@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Kyle Evans <kevans@FreeBSD.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Implement the register copying routines to extract registers from the
cpu for core dump generation.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Kyle Evans <kevans@FreeBSD.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Implement the system call dispatch. This implements all three kinds of
system call: direct and the two indirect variants. It handles all the
special cases for thumb as well.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Kyle Evans <kevans@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Kyle Evans <kevans@FreeBSD.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Implement EXCP_PREFETCH_ABORT AND EXCP_DATA_ABORT. Both of these data
exceptions cause a SIGSEGV.
Signed-off-by: Kyle Evans <kevans@FreeBSD.org>
Signed-off-by: Olivier Houchard <cognet@ci0.org>
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Kyle Evans <kevans@FreeBSD.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Implement EXCP_UDEF, EXCP_DEBUG, EXCP_INTERRUPT, EXCP_ATOMIC and
EXCP_YIELD. The first two generate a signal to the emulated
binary. EXCP_ATOMIC handles atomic operations. The remainder are fancy
nops.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Mikaël Urankar <mikael.urankar@gmail.com>
Signed-off-by: Kyle Evans <kevans@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Add a boiler plate CPU loop that does nothing except return an error for
all traps.
Signed-off-by: Sean Bruno <sbruno@FreeBSD.org>
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Kyle Evans <kevans@FreeBSD.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Implement target_cpu_clone_regs to clone the resister state on a fork.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Kyle Evans <kevans@FreeBSD.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
target_arch_cpu.h is for CPU loop definitions. Create the file and
define target_cpu_init and target_cpu_reset for arm.
Signed-off-by: Olivier Houchard <cognet@ci0.org>
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Kyle Evans <kevans@FreeBSD.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Target specific TLS routines to get and set the TLS values.
Signed-off-by: Kyle Evans <kevans@FreeBSD.org>
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Kyle Evans <kevans@FreeBSD.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
The preferred name for the 32-bit arm is now armv7. Update the name to
reflect that. In addition, add Stacey's copyright to this file and
update the include guards to the new convention.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Kyle Evans <kevans@FreeBSD.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
As part of upstreaming, the include guards have been made more
consistent. Update this file to use the new guards.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Kyle Evans <kevans@FreeBSD.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Switch to the CPUArchState typedef and move target-provided prototypes
to target_os_ucontext.h.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Move the current inline functions into sigal.c. This will increate the
flexibility of implementation in the future.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Fill in target_mcontext match the FreeBSD mcontext_t structure. Also
define the size correctly.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
In FreeBSD, sigcontext was retired in favor of ucontext/mcontext.
Remove vestigial target_sigcontext.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Move the (now stubbed out) inlines into bsd-user/i386/signal.c.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Fill in target_mcontext_t to match the FreeBSD mcontex_t. Also tag the
current size of mcontext and ucontext to enable size checking for i386.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
In FreeBSD, sigcontext was retired in favor of ucontext/mcontext.
Remove vestigial target_sigcontext.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Create a place-holder signal.c file for each of the architectures that
are currently built. In the future, some code that's currently inlined
in target_arch_signal.h will live here.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
FreeBSD has a MI ucontext structure that contains the MD mcontext
machine state and other things that are machine independent. Create an
include file for all the ucontext stuff. It needs to be included in the
arch specific files after target_mcontext is defined. This is largely
copied from sys/_ucontext.h with the comments about layout removed
because we don't support ancient FreeBSD binaries.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
FreeBSD is dropping support for mips starting with FreeBSD 14. mips
support has been removed from the bsd-user fork because updating it for
new signal requirements will take too much time. Remove it here since it
is a distraction.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
We have no need to reference bsd_user_ss outside of bsd-user.
Go ahead and merge it directly into specific_ss.
Reviewed-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Move linux-user safe-syscall.S and safe-syscall-error.c to common-user
so that bsd-user can also use it. Also move safe-syscall.h to
include/user/. Since there is nothing here that is related to the guest,
as opposed to the host, build it once.
Reviewed-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Pull the internal errno used by qemu internally its own
header file, for use by safe-syscall.S.
Reviewed-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This value is fully internal to qemu, and so is not a TARGET define.
We use this as an extra marker for both host and target errno.
Reviewed-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Until the signal support is merged from the bsd-user fork, we need stubs
for cpu_loop_exit_sigsegv and cpu_loop_exit_sigbus to link. These call
abort after logging a message. Since singals aren't supported here
yet, this is sufficient.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Message-Id: <20211102225248.52999-2-imp@bsdimp.com>
Tested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Create dummy signal queueing function so we can start to integrate other
architectures (at the cost of signals remaining broken) to tame the
dependency graph a bit and to bring in signals in a more controlled
fashion. Log unimplemented events to it in the mean time.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Kyle Evans <kevans@FreeBSD.org>
To avoid a name clash with FreeBSD's sigqueue data structure in
signalvar.h, rename sigqueue to qemu_sigqueue. This structure
is currently defined, but unused.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Kyle Evans <kevans@FreeBSD.org>
do_freebsd_arch_sysarch() exists in $ARCH/target_arch_sysarch.h for x86.
Call it from do_freebsd_sysarch() and remove the mostly duplicate
version in syscall.c. Future changes will move it to os-sys.c and
support other architectures.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Kyle Evans <kevans@FreeBSD.org>
Similar to the same function in linux-user: this stops all the current tasks.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Kyle Evans <kevans@FreeBSD.org>
The 'used' field in TaskState is write only. Remove it from TaskState.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Kyle Evans <kevans@FreeBSD.org>
Some architectures publish AT_HWCAP2 as well as AT_HWCAP. Those
architectures will define ELF_HWCAP2 in their target_arch_elf.h files
for the value for this process. If it is defined, then publish it.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Kyle Evans <kevans@FreeBSD.org>
All architectures have a ELF_HWCAP, so remove the fallback ifdef.
Place ELF_HWCAP in the same order as on native FreeBSD.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Kyle Evans <kevans@FreeBSD.org>
Move TARGET_MC_GET_CLEAR_RET to freebsd/target_os_signal.h since it's
architecture agnostic on FreeBSD.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Kyle Evans <kevans@FreeBSD.org>
To emulate signals and interrupted system calls, we need to have the
same mechanisms we have in the kernel, including these errno values.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Kyle Evans <kevans@FreeBSD.org>
Make get_errno and is_error global so files other than syscall.c can use
them.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Kyle Evans <kevans@FreeBSD.org>
To increase flexibility, only descend into *-user when that is
configured. This allows *-user to selectively include directories based
on the host OS which may not exist on all hosts. Adopt Paolo's
suggestion of checking the configuration in the directories that know
about the configuration.
Message-Id: <20210926220103.1721355-2-f4bug@amsat.org>
Message-Id: <20210926220103.1721355-3-f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Warner Losh <wlosh@bsdimp.com>
Acked-by: Paolo Bonzini <pbonzinni@redhat.com>
Reviewed-by: Kyle Evans <kevans@FreeBSD.org>
Similar to the equivalent linux-user change 86abac06c1. All error
conditions that target_mprotect checks are also checked by target_mmap.
EACCESS cannot happen because we are just removing PROT_WRITE. ENOMEM
should not happen because we are modifying a whole VMA (and we have
bigger problems anyway if it happens).
Fixes a Coverity false positive, where Coverity complains about
target_mprotect's return value being passed to tb_invalidate_phys_range.
Signed-off-by: Mikaël Urankar <mikael.urankar@gmail.com>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Kyle Evans <kevans@FreeBSD.org>
jemalloc requires a working MAP_EXCL. Ensure that no page is double
mapped when specified. In addition, use guest_range_valid_untagged to
test for valid ranges of pages rather than an incomplete inlined version
of the test that might be wrong.
Signed-off-by: Kyle Evans <kevans@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Switch checks for !(flags & MAP_ANONYMOUS) with checks for fd != -1.
MAP_STACK and MAP_GUARD both require fd == -1 and don't require mapping
the fd either. Add analysis from Guy Yur detailing the different cases
for MAP_GUARD and MAP_STACK.
Signed-off-by: Guy Yur <guyyur@gmail.com>
[ partially merged before, finishing the job and documenting origin]
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Kyle Evans <kevans@FreeBSD.org>
MAP_ANON and MAP_ANONYMOUS are identical. Prefer MAP_ANON for BSD since
the file is now a confusing mix of the two.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Kyle Evans <kevans@FreeBSD.org>
mmap should return ENOMEM on len overflow rather than EINVAL. Return
EINVAL when len == 0 and ENOMEM when the rounded to a page length is 0.
Found by make check-tcg.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Kyle Evans <kevans@FreeBSD.org>
All these MAP_ symbols are always defined on supported FreeBSD versions
(12.2 and newer), so remove the #ifdefs since they aren't needed.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Kyle Evans <kevans@FreeBSD.org>
Simmilar to the equivalent linux-user: commit fb7e378cf9, which added
checking to pread's return value. Update to current qemu standards with
{} around the if statement.
Signed-off-by: Mikaël Urankar <mikael.urankar@gmail.com>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Kyle Evans <kevans@FreeBSD.org>
Similar to the equivalent linux-user commit e6deac9cf9
When mapping MAP_ANONYMOUS memory fragments, still need notice about to
set it zero, or it will cause issues.
Signed-off-by: Mikaël Urankar <mikael.urankar@gmail.com>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Kyle Evans <kevans@FreeBSD.org>
cpu_get_pic_interrupt() is now unreachable from user-mode,
delete the unnecessary stubs.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210911165434.531552-25-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Update the reserved base based on what platform we're on, as well as the
start of the mmap range. Update routines that find va ranges to interact
with the reserved ranges as well as properly align the mapping (this is
especially important for targets whose page size does not match the
host's). Loop where appropriate when the initial address space offered
by mmap does not meet the contraints.
This has 18e80c55bb from linux-user folded in to the upstream
bsd-user code as well.
Signed-off-by: Mikaël Urankar <mikael.urankar@gmail.com>
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Kyle Evans <kevans@FreeBSD.org>
Previously it was impossible to emulate a program with a file name
different from its argv[0]. With this change, you can run
qemu -0 fakename realname args
which runs the program "realname" with an argv of "fakename args".
Signed-off-by: Colin Percival <cperciva@tarsnap.com>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Implement the internlock in fork_start() and fork_end() to properly cope
with atomic operations and to safely keep state for parent and child
processes.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Factor out load_elf_sections and is_target_elf_binary out of
load_elf_interp.
Signed-off-by: Mikaël Urankar <mikael.urankar@gmail.com>
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Kyle Evans <kevans@FreeBSD.org>
Various style fixes to elfload.c that were too painful to make earlier
in this series.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Add a stubbed-out version of the bsd-user fork's core dump support. This
allows elfload.c to be almost the same between what's upstream and
what's in qemu-project upstream w/o the burden of reviewing the core
dump support.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
This file evolved over the years to capture the user/kernel interfaces,
including those that changed over time.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Michal Meloun <mmel@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Kyle Evans <kevans@FreeBSD.org>
target_reg_t is the normal register. target_fpreg_t is the floating
point registers. target_copy_regs copies the registers out of CPU
context for things like core dumps.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Update the debugging code for new features and different targets.
Signed-off-by: Mikaël Urankar <mikael.urankar@gmail.com>
Signed-off-by: Sean Bruno <sbruno@FreeBSD.org>
Signed-off-by: Kyle Evans <kevans@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Kyle Evans <kevans@FreeBSD.org>
Rewrite target definnitions to interface with the FreeBSD system calls.
This covers basic types (time_t, iovec, umtx_time, timespec, timeval,
rusage, rwusage) and basic defines (mmap, rusage). Also included are
FreeBSD version-specific variations.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Kyle Evans <kevans@FreeBSD.org>
LOW_ELF_STACK doesn't exist on FreeBSD and likely never will. Remove it.
Likewise, remove an #if 0 block that's not useful
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Move OS-dependent defines into target_os_elf.h. Move the architectural
dependent stuff into target_arch_elf.h. Adjust elfload.c to use
target_create_elf_tables instead of create_elf_tables.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Kyle Evans <kevans@FreeBSD.org>
Signed-off-by: Justin Hibbits <chmeeedalf@gmail.com>
Signed-off-by: Alexander Kabaev <kan@FreeBSD.ORG>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Kyle Evans <kevans@FreeBSD.org>
Add a stubbed out version of setup_sigtramp. This is not yet used for
x86, but is used for other architectures. This will be connected in
future commits.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Move all of the stack initialization into target_os_stack.h. Each BSD
sets up processes a little differently.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Copy --seed implementation (translated from linux-user's newer command
line scheme to the older one bsd-user still uses). Initialize the
randomness with the glib if a specific seed is specified or use the
qcrypto library if not.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Add FreeBSD, NetBSD and OpenBSD values for the various signal info types
and defines to decode different signals to discover more information
about the specific signal types.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Kyle Evans <kevans@FreeBSD.org>
Eliminate the x86 specific stack stuff in favor of more generic control
over the process size:
target_maxtsiz max text size
target_dfldsiz initial data size limit
target_maxdsiz max data size
target_dflssiz initial stack size limit
target_maxssiz max stack size
target_sgrowsiz amount to grow stack
These can be set on a per-arch basis, and the stack size can be set
on the command line. Adjust the stack size parameters at startup.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Target specific values for vm parameters and details.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
For 32-bit platforms, pass in up to 256k of args. For 64-bit, bump that
to 512k.
Signed-off-by: Kyle Evans <kevans@freebsd.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Include more header files to match bsd-user fork.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Update target_arch_elf.h to remove thread_init. Move its contents to
target_arch_thread.h and rename to target_thread_init(). Update
elfload.c to call it. Create thread_os_thread.h to hold the os specific
parts of the thread and threat manipulation routines. Currently, it just
includes target_arch_thread.h. target_arch_thread.h contains the at the
moment unused target_thread_set_upcall which will be used in the future
when creating actual thread (i386 has this stubbed, but other
architectures in the bsd-user tree have real ones). FreeBSD doesn't do
AT_HWCAP, so remove that code. Linux does, and this code came from there.
These changes are all interrelated and could be brokend down, but seem
to represent a reviewable changeset since most of the change is boiler
plate.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Kyle Evans <kevans@FreeBSD.org>
Move cpu_loop() into target_cpu_loop(), and put that in
target_arch_cpu.h for each architecture.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Move the CPU functions into target_arch_cpu.c that are unique to each
CPU. These are defined in target_arch.h.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Save the path to the qemu emulator. This will be used later when we have
a more complete implementation of exec.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Kyle Evans <kevans@FreeBSD.org>
Include host-os.h from main.c to pick up the default OS to emulate. Set
that default in main().
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Host OS specific bits for this implementation go in this file.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
All compilers for some time have supported this. Follow linux-user and
eliminate the #define THREAD and unconditionally insert __thread where
needed. Please insert: "(see 24cb36a61c6: "configure: Make NPTL
non-optional")"
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reduce the number of ifdefs by always calling the swapping routine, but
making them empty when swapping isn't needed.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Remove still-born a.out support. The BSDs switched from a.out to ELF 20+ years
ago. It's out of scope for bsd-user, and what little support there was would
simply wind up at a not-implemented message. Simplify the whole mess by removing
it entirely. Should future support be required, it would be better to start from
scratch.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
The linux kernel supports a number of different ELF binaries. The Linux userland
emulator inheritted some of that. And we inheritted it from there. However, for
BSD there's only one kind of ELF file supported per platform, so there's no need
to cope with historical quirks. Simply the code as a result.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Use the PATH to find the executable given a bare argument. We need to do
this so we can implement mixing native and emulated binaries (e.g.,
execing a x86 native binary from an emulated arm binary to optimize
parts of the build). By finding the binary, we will know how to exec it.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
It was incorrect to subtract off the size of an unsigned int here. In
bsd-user fork, this change was made when moving the arch specific items
to specific files. The size in BSD that's available for the arguments
does not need a return address subtracted from it.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Pass the bsd_param into loader_exec, and adjust. We use it to track the
inital stack allocation and to set stack, open files, and other state
shared between bsdload.c and elfload.c
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Move the architecture specific defines to target_arch_elf.h and delete
them from elfload.c. Only retain ifdefs appropriate for i386 and x86_64.
Add the copyright/license comments, and guard ifdefs.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
bsd-user only builds x86 at the moment. Remove all non x86 code from
elfload.c. We'll move the x86 code to {i386,x86_64}/target_arch_elf.h
and bring it that support code from the forked bsd-user when the time
comes.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Pull in the license statement at the top of the bsdload.c file
from the bsd-user fork version of this file. No functional changes.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Add Stacey's updated copyright to main.c
Signed-off-by: Warner Losh <imp@bsdimp.com>
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Add Stacey's copyright to elfload.c
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
These are broken here and in the bsd-user fork. They won't be fixed as
FreeBSD has dropped support for sparc. If people wish to support this in
other BSDs, you're better off starting over than starting from these
files.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
In user-mode emulation there is a small race between preexit_cleanup
and exit_group() which means we may end up calling instrumented
instructions before the kernel reaps child threads. To solve this we
implement a new helper which ensures the callbacks are flushed along
with any translations before we let the host do it's a thing.
While we are at it make the documentation of
qemu_plugin_register_atexit_cb clearer as to what the user can expect.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Mahmoud Mandour <ma.mandourr@gmail.com>
Acked-by: Warner Losh <imp@bsdimp.com>
Message-Id: <20210720232703.10650-21-alex.bennee@linaro.org>
There is only one caller, and shortly we will need access
to the MachineState, which tcg_init_machine already has.
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Instead of delaying tcg_region_init until after tcg_prologue_init
is complete, do tcg_region_init first and let tcg_prologue_init
shrink the first region by the size of the generated prologue.
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
bsd-user fork into qemu. It contains a number of style commits, as well as 3
commits that start to change things: Some unused files are deleted, building the
sparc and sparc64 targets are removed, and a structure is renamed.
The next set of pull requests will start to execute the following plan:
1. Move existing code around to have a structure similar to the bsd-user fork.
2. Incrementally merge groups of system calls, focused on making x86 work.
3. Once the groups of system calls are all merged, additional platforms will
be added back.
4. Concurrently, as changes are requested as part of the merge happen, those
changes will be merged into the fork. An experimental merge to tip of master
is under test and is what will be updated.
5. Eventually, there will be no diference, and the bsd-user fork will only
be a staging area for cutting-edge features prior to upstreaming into
qemu mainline.
The bsd-user code in qemu has a lot of style issues. This cleans up a number in
the files touched. However, the checkpatch.pl detects some incremental issues in
the commits. The following are expected, but are corrected in later hashes in
this branch. MAINTAINERS does not need to be updated, since all the files added
or deleted are covered under existing regexp in MAINTAINERS.
Checking all commits since f9a576a818044133f8564e0d243ebd97df0b3280...
d60c3b932e2fa06aba5d7aa1c451b5d287095dc8:101: ERROR: consider using qemu_strtol in preference to strtol
d60c3b932e2fa06aba5d7aa1c451b5d287095dc8:142: ERROR: braces {} are necessary for all arms of this statement
d60c3b932e2fa06aba5d7aa1c451b5d287095dc8:145: ERROR: braces {} are necessary for all arms of this statement
total: 3 errors, 0 warnings, 119 lines checked
b4bebeee1dee8d333bfa105a6c28fec5eb34b147:148: WARNING: line over 80 characters
b4bebeee1dee8d333bfa105a6c28fec5eb34b147:330: ERROR: braces {} are necessary for all arms of this statement
b4bebeee1dee8d333bfa105a6c28fec5eb34b147:340: ERROR: braces {} are necessary for all arms of this statement
b4bebeee1dee8d333bfa105a6c28fec5eb34b147:381: ERROR: space prohibited between function name and open parenthesis '('
b4bebeee1dee8d333bfa105a6c28fec5eb34b147:390: ERROR: spaces required around that '<' (ctx:VxV)
b4bebeee1dee8d333bfa105a6c28fec5eb34b147:408: WARNING: Block comments use a leading /* on a separate line
b4bebeee1dee8d333bfa105a6c28fec5eb34b147:409: WARNING: Block comments use * on subsequent lines
b4bebeee1dee8d333bfa105a6c28fec5eb34b147:409: WARNING: Block comments use a trailing */ on a separate line
b4bebeee1dee8d333bfa105a6c28fec5eb34b147:441: WARNING: line over 80 characters
b4bebeee1dee8d333bfa105a6c28fec5eb34b147:445: WARNING: line over 80 characters
b4bebeee1dee8d333bfa105a6c28fec5eb34b147:502: ERROR: line over 90 characters
b4bebeee1dee8d333bfa105a6c28fec5eb34b147:551: ERROR: space required after that ',' (ctx:VxV)
b4bebeee1dee8d333bfa105a6c28fec5eb34b147:552: ERROR: space required after that ',' (ctx:VxV)
b4bebeee1dee8d333bfa105a6c28fec5eb34b147:587: ERROR: space required after that ';' (ctx:VxV)
b4bebeee1dee8d333bfa105a6c28fec5eb34b147:623: ERROR: suspect code indent for conditional statements (12, 14)
total: 9 errors, 6 warnings, 664 lines checked
86545e7afe3f822b8561c7ceee7540fc3b19c3f0:31: ERROR: space required after that ';' (ctx:VxV)
86545e7afe3f822b8561c7ceee7540fc3b19c3f0:40: ERROR: space required after that ';' (ctx:VxV)
total: 2 errors, 0 warnings, 60 lines checked
Use of uninitialized value $acpi_testexpected in string eq at scripts/checkpatch.pl line 1529.
65d58c91ef1a15ad945ece367983437576f8e82b:22: WARNING: added, moved or deleted file(s), does MAINTAINERS need updating?
total: 0 errors, 1 warnings, 14 lines checked
Use of uninitialized value $acpi_testexpected in string eq at scripts/checkpatch.pl line 1529.
f8ce39701b5be032fb3f9c05e8adb4055f70eec2:21: WARNING: added, moved or deleted file(s), does MAINTAINERS need updating?
total: 0 errors, 1 warnings, 0 lines checked
FAIL one or more commits failed scripts/checkpatch.pl
Cleaning up file based variables
ERROR: Job failed: exit code 1
-----BEGIN PGP SIGNATURE-----
Comment: GPGTools - https://gpgtools.org
iQIzBAABCgAdFiEEIDX4lLAKo898zeG3bBzRKH2wEQAFAmCcBQIACgkQbBzRKH2w
EQD4+A/9E3Yr7cIBegz0km6pTHX89y6AW4+qd6QkQgYkZ9PloIVCjSn3NxvvPy3d
sCVhZu2FutEuoI2EOjzBpgQCp8mhSfayPKiZIzvHeJn9yiTmNnuHd/Opr2NaxkUV
WT9Eli7aB5AhYL1AD6RVEyYQYQJLq/ULdJXUVaOe5X2werk/FT7izhVqA4hkMFUm
Rx3RrMZDAyhgPT1+EUrNMgw2/dQw7QEH3w0RREc/Btfs8Wwisqq+Uy0Z8p9+khSU
K5ES6FnYAoOU9EP1LMjOzuh54B2Ta9J0Z4vfjlul8+WM9DBap5FogiNChVd/mjvL
1NYJUPFIC9KaV+5xNAJanW7h531lFKwHzZka68Dmzsbjdj0sUg2GkPhneOXEH8lX
Q6Kmoxpg8IpfwfB/VDPM4eL3SdNQd8d/1VSUkLOS0reOc8L9RmLXSYlJILzNkDR9
yODoBgSktX2e4wnyuknyXi1JuIx2yHCsPHq+PtBYUnHEfc8W7V9yxwhAYshuRQDy
sZO1AdwEQHzgNjnCPK8ru6DqrizHwKnlE1KUy5KxUOcmfaacZ//t9ezf8qSd19eC
6deGfmfvp3Xxtz38eCLogKJXzIDjf+FMaN+0znOd0ut9qPPCqBgALZNnkeaDz+zx
2ZGhjwcRAsKZmGSLQoKPN+YkM5POwzWvEPNApPsVJjpTXpoZcJ8=
=pW6n
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bsdimp/tags/pull-bsd-user-20210511' into staging
pull-bsd-user-20210511 is the next round of cleanups to bsd-user in merging the
bsd-user fork into qemu. It contains a number of style commits, as well as 3
commits that start to change things: Some unused files are deleted, building the
sparc and sparc64 targets are removed, and a structure is renamed.
The next set of pull requests will start to execute the following plan:
1. Move existing code around to have a structure similar to the bsd-user fork.
2. Incrementally merge groups of system calls, focused on making x86 work.
3. Once the groups of system calls are all merged, additional platforms will
be added back.
4. Concurrently, as changes are requested as part of the merge happen, those
changes will be merged into the fork. An experimental merge to tip of master
is under test and is what will be updated.
5. Eventually, there will be no diference, and the bsd-user fork will only
be a staging area for cutting-edge features prior to upstreaming into
qemu mainline.
The bsd-user code in qemu has a lot of style issues. This cleans up a number in
the files touched. However, the checkpatch.pl detects some incremental issues in
the commits. The following are expected, but are corrected in later hashes in
this branch. MAINTAINERS does not need to be updated, since all the files added
or deleted are covered under existing regexp in MAINTAINERS.
Checking all commits since f9a576a818044133f8564e0d243ebd97df0b3280...
d60c3b932e2fa06aba5d7aa1c451b5d287095dc8:101: ERROR: consider using qemu_strtol in preference to strtol
d60c3b932e2fa06aba5d7aa1c451b5d287095dc8:142: ERROR: braces {} are necessary for all arms of this statement
d60c3b932e2fa06aba5d7aa1c451b5d287095dc8:145: ERROR: braces {} are necessary for all arms of this statement
total: 3 errors, 0 warnings, 119 lines checked
b4bebeee1dee8d333bfa105a6c28fec5eb34b147:148: WARNING: line over 80 characters
b4bebeee1dee8d333bfa105a6c28fec5eb34b147:330: ERROR: braces {} are necessary for all arms of this statement
b4bebeee1dee8d333bfa105a6c28fec5eb34b147:340: ERROR: braces {} are necessary for all arms of this statement
b4bebeee1dee8d333bfa105a6c28fec5eb34b147:381: ERROR: space prohibited between function name and open parenthesis '('
b4bebeee1dee8d333bfa105a6c28fec5eb34b147:390: ERROR: spaces required around that '<' (ctx:VxV)
b4bebeee1dee8d333bfa105a6c28fec5eb34b147:408: WARNING: Block comments use a leading /* on a separate line
b4bebeee1dee8d333bfa105a6c28fec5eb34b147:409: WARNING: Block comments use * on subsequent lines
b4bebeee1dee8d333bfa105a6c28fec5eb34b147:409: WARNING: Block comments use a trailing */ on a separate line
b4bebeee1dee8d333bfa105a6c28fec5eb34b147:441: WARNING: line over 80 characters
b4bebeee1dee8d333bfa105a6c28fec5eb34b147:445: WARNING: line over 80 characters
b4bebeee1dee8d333bfa105a6c28fec5eb34b147:502: ERROR: line over 90 characters
b4bebeee1dee8d333bfa105a6c28fec5eb34b147:551: ERROR: space required after that ',' (ctx:VxV)
b4bebeee1dee8d333bfa105a6c28fec5eb34b147:552: ERROR: space required after that ',' (ctx:VxV)
b4bebeee1dee8d333bfa105a6c28fec5eb34b147:587: ERROR: space required after that ';' (ctx:VxV)
b4bebeee1dee8d333bfa105a6c28fec5eb34b147:623: ERROR: suspect code indent for conditional statements (12, 14)
total: 9 errors, 6 warnings, 664 lines checked
86545e7afe3f822b8561c7ceee7540fc3b19c3f0:31: ERROR: space required after that ';' (ctx:VxV)
86545e7afe3f822b8561c7ceee7540fc3b19c3f0:40: ERROR: space required after that ';' (ctx:VxV)
total: 2 errors, 0 warnings, 60 lines checked
Use of uninitialized value $acpi_testexpected in string eq at scripts/checkpatch.pl line 1529.
65d58c91ef1a15ad945ece367983437576f8e82b:22: WARNING: added, moved or deleted file(s), does MAINTAINERS need updating?
total: 0 errors, 1 warnings, 14 lines checked
Use of uninitialized value $acpi_testexpected in string eq at scripts/checkpatch.pl line 1529.
f8ce39701b5be032fb3f9c05e8adb4055f70eec2:21: WARNING: added, moved or deleted file(s), does MAINTAINERS need updating?
total: 0 errors, 1 warnings, 0 lines checked
FAIL one or more commits failed scripts/checkpatch.pl
Cleaning up file based variables
ERROR: Job failed: exit code 1
# gpg: Signature made Wed 12 May 2021 17:40:34 BST
# gpg: using RSA key 2035F894B00AA3CF7CCDE1B76C1CD1287DB01100
# gpg: Good signature from "Warner Losh <wlosh@netflix.com>" [unknown]
# gpg: aka "Warner Losh <imp@bsdimp.com>" [unknown]
# gpg: aka "Warner Losh <imp@freebsd.org>" [unknown]
# gpg: aka "Warner Losh <imp@village.org>" [unknown]
# gpg: aka "Warner Losh <wlosh@bsdimp.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 2035 F894 B00A A3CF 7CCD E1B7 6C1C D128 7DB0 1100
* remotes/bsdimp/tags/pull-bsd-user-20210511:
bsd-user: rename linux_binprm to bsd_binprm
bsd-user: Stop building the sparc targets
bsd-user: remove target_signal.h, it's unused
bsd-user: style tweak: keyword space (
bsd-user: style tweak: Remove #if 0'd code
bsd-user: style tweak: keyword space (
bsd-user: style tweak: keyword space (
bsd-user: whitespace changes
bsd-user: use qemu_strtoul in preference to strtol
bsd-user: style tweak: use {} consistently in for / if / else statements
bsd-user: style tweak: use {} for all if statements, format else correctly
bsd-user: style tweak: don't assign in if statements
bsd-user: style tweak: Use preferred block comments
bsd-user: style tweak: remove spacing after '*' and add after }
bsd-user: style tweak: move extern to header file
bsd-user: Remove commented out code
bsd-user: style tweak: Use preferred block comments
bsd-user: style tweak: Remove #if 0'd code
bsd-user: style tweak: use C not C++ comments
bsd-user: whitespace changes
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Rename linux_binprm to bsd_binprm to reflect that we're loading BSD binaries,
not ELF ones.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Remove the target_signal.h file. None of its contents are currently used and the
bsd-user fork doesn't use them (so this reduces the diffs there).
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Fix various whitespace-only issues from checkpatch:
keyword space (
no space before ( on function calls
spaces around operators
suspect indentations (including one functions reindented)
extra spaces around unary operators
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Fix various issues with {} not being present on if / for statements.
Minor line length tweaks
Move an assignment in an if out.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Warner Losh