We use __builtin_subcll() to do a 64-bit subtract with borrow-in and
borrow-out when the host compiler supports it. Unfortunately some
versions of Apple Clang have a bug in their implementation of this
intrinsic which means it returns the wrong value. The effect is that
a QEMU built with the affected compiler will hang when emulating x86
or m68k float80 division.
The upstream LLVM issue is:
https://github.com/llvm/llvm-project/issues/55253
The commit that introduced the bug apparently never made it into an
upstream LLVM release without the subsequent fix
fffb6e6afd
but unfortunately it did make it into Apple Clang 14.0, as shipped
in Xcode 14.3 (14.2 is reported to be OK). The Apple bug number is
FB12210478.
Add ifdefs to avoid use of __builtin_subcll() on Apple Clang version
14 or greater. There is not currently a version of Apple Clang which
has the bug fix -- when one appears we should be able to add an upper
bound to the ifdef condition so we can start using the builtin again.
We make the lower bound a conservative "any Apple clang with major
version 14 or greater" because the consequences of incorrectly
disabling the builtin when it would work are pretty small and the
consequences of not disabling it when we should are pretty bad.
Many thanks to those users who both reported this bug and also
did a lot of work in identifying the root cause; in particular
to Daniel Bertalan and osy.
Cc: qemu-stable@nongnu.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1631
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1659
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Tested-by: Daniel Bertalan <dani@danielbertalan.dev>
Tested-by: Tested-By: Solra Bizna <solra@bizna.name>
Message-id: 20230622130823.1631719-1-peter.maydell@linaro.org
We will need 2 bits to represent ARMSecurityState.
Do not attempt to replace or widen secure, even though it
logically overlaps the new field -- there are uses within
e.g. hw/block/pflash_cfi01.c, which don't know anything
specific about ARM.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230620124418.805717-7-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Also change the instantiation of the macfb device to use object_initialize_child().
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20230621085353.113233-23-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Also change the instantiation of the mac-nubus-bridge device to use
object_initialize_child() and map the Nubus address space using
memory_region_add_subregion() instead of sysbus_mmio_map().
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230621085353.113233-21-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Also change the instantiation of the SWIM device to use object_initialize_child().
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20230621085353.113233-20-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Also change the instantiation of the ESP device to use object_initialize_child().
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20230621085353.113233-19-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Also change the instantiation of the escc_orgate device to use object_initialize_child().
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20230621085353.113233-18-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Also change the instantiation of the ESCC device to use object_initialize_child().
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20230621085353.113233-17-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Also change the instantiation of the dp8393x device to use object_initialize_child().
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
CC: Jason Wang <jasowang@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20230621085353.113233-16-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This is to enable them to be used outside of dp8393x.c.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
CC: Jason Wang <jasowang@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230621085353.113233-15-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Also change the instantiation of the VIA2 device to use object_initialize_child().
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20230621085353.113233-14-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Also change the instantiation of the VIA1 device to use object_initialize_child().
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20230621085353.113233-13-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The current use of aliased memory regions causes us 2 problems: firstly the
output of "info qom-tree" is absolutely huge and difficult to read, and
secondly we have already reached the internal limit for memory regions as
adding any new memory region into the mac-io region causes QEMU to assert
with "phys_section_add: Assertion `map->sections_nb < TARGET_PAGE_SIZE'
failed".
Implement the mac-io region aliasing using a single IO memory region that
applies IO_SLICE_MASK representing the maximum size of the aliased region and
then forwarding the access to the existing mac-io memory region using the
address space API.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20230621085353.113233-12-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Move all devices from the IO region to within the container in preparation
for updating the IO aliasing mechanism.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230621085353.113233-11-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Also change the instantiation of the GLUE device to use object_initialize_child().
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20230621085353.113233-10-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This will allow the q800-glue.h header to be included separately so that the
GLUE device can be referenced externally.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230621085353.113233-8-mark.cave-ayland@ilande.co.uk>
[lv: update comment]
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Also change the instantiation of the CPU to use object_initialize_child()
followed by a separate realisation.
Restrict valid CPU types to m68040.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230621085353.113233-6-mark.cave-ayland@ilande.co.uk>
[lv: update commit message]
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This provides an overall container and owner for Machine-related objects such
as MemoryRegions.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230621085353.113233-4-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This reverts commit d7ee93e243.
That commit tries to make a field in the CPUState struct not be
present when CONFIG_USER_ONLY is set. Unfortunately, you can't
conditionally omit fields in structs like this based on ifdefs that
are set per-target. If you try it, then code in files compiled
per-target (where CONFIG_USER_ONLY is or can be set) will disagree
about the struct layout with files that are compiled once-only (where
this kind of ifdef is never set).
This manifests specifically in 'make check-tcg' failing, because code
in cpus-common.c that sets up the CPUState::cpu_index field puts it
at a different offset from the code in plugins/core.c in
qemu_plugin_vcpu_init_hook() which reads the cpu_index field. The
latter then hits an assert because from its point of view every
thread has a 0 cpu_index. There might be other weird behaviour too.
Mostly we catch this kind of bug because the CONFIG_whatever is
listed in include/exec/poison.h and so the reference to it in
build-once source files will then cause a compiler error.
Unfortunately CONFIG_USER_ONLY is an exception to that: we have some
places where we use it in "safe" ways in headers that will be seen by
once-only source files (e.g. ifdeffing out function prototypes) and
it would be a lot of refactoring to be able to get to a position
where we could poison it. This leaves us in a "you have to be
careful to walk around the bear trap" situation...
Fixes: d7ee93e243 ("cputlb: Restrict SavedIOTLB to system emulation")
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20230620175712.1331625-1-peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Commit 2f3a57ee47 ("cputlb: ensure we save the IOTLB data in
case of reset") added the SavedIOTLB structure -- which is
system emulation specific -- in the generic CPUState structure.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221216215519.5522-3-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We want to check the softmmu tlb availability, not
if we are targetting system emulation. Besides, this
code could be used by user emulation in the future.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230605230216.17202-1-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Since we *might* have user emulation with softmmu,
replace the system emulation check by !user emulation one.
Invert the #ifdef'ry in TCGCPUOps structure for clarity.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230613133347.82210-6-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Sergey Kambalin <sergey.kambalin@auriga.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20230612223456.33824-5-philmd@linaro.org
Message-Id: <20230531155258.8361-1-sergey.kambalin@auriga.com>
[PMD: Split from bigger patch: 3/4]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
[PMM: added a comment about RPI_FIRMWARE_CORE_CLK_RATE
really being SoC-specific]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The Linux kernel added a flood check for RX data recently in commit
496a4471b7c3 ("serial: imx: work-around for hardware RX flood"). This
check uses the wake bit in the UART status register 2. The wake bit
indicates that the receiver detected a start bit on the RX line. If the
kernel sees a number of RX interrupts without the wake bit being set, it
treats this as spurious data and resets the UART port. imx_serial does
never set the wake bit and triggers the kernel's flood check.
This patch adds support for the wake bit. wake is set when we receive a
new character (it's not set for break events). It seems that wake is
cleared by the kernel driver, the hardware does not have to clear it
automatically after data was read.
The wake bit can be configured as an interrupt source. Support this
mechanism as well.
Co-developed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add a new machine xenpvh which creates a IOREQ server to register/connect with
Xen Hypervisor.
Optional: When CONFIG_TPM is enabled, it also creates a tpm-tis-device, adds a
TPM emulator and connects to swtpm running on host machine via chardev socket
and support TPM functionalities for a guest domain.
Extra command line for aarch64 xenpvh QEMU to connect to swtpm:
-chardev socket,id=chrtpm,path=/tmp/myvtpm2/swtpm-sock \
-tpmdev emulator,id=tpm0,chardev=chrtpm \
-machine tpm-base-addr=0x0c000000 \
swtpm implements a TPM software emulator(TPM 1.2 & TPM 2) built on libtpms and
provides access to TPM functionality over socket, chardev and CUSE interface.
Github repo: https://github.com/stefanberger/swtpm
Example for starting swtpm on host machine:
mkdir /tmp/vtpm2
swtpm socket --tpmstate dir=/tmp/vtpm2 \
--ctrl type=unixio,path=/tmp/vtpm2/swtpm-sock &
Signed-off-by: Vikram Garhwal <vikram.garhwal@amd.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
This is done to prepare for enabling xenpv support for ARM architecture.
On ARM it is possible to have a functioning xenpv machine with only the
PV backends and no IOREQ server. If the IOREQ server creation fails,
continue to the PV backends initialization.
Signed-off-by: Stefano Stabellini <stefano.stabellini@amd.com>
Signed-off-by: Vikram Garhwal <vikram.garhwal@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Paul Durrant <paul@xen.org>
This patch does following:
1. creates arch_handle_ioreq() and arch_xen_set_memory(). This is done in
preparation for moving most of xen-hvm code to an arch-neutral location,
move the x86-specific portion of xen_set_memory to arch_xen_set_memory.
Also, move handle_vmport_ioreq to arch_handle_ioreq.
2. Pure code movement: move common functions to hw/xen/xen-hvm-common.c
Extract common functionalities from hw/i386/xen/xen-hvm.c and move them to
hw/xen/xen-hvm-common.c. These common functions are useful for creating
an IOREQ server.
xen_hvm_init_pc() contains the architecture independent code for creating
and mapping a IOREQ server, connecting memory and IO listeners, initializing
a xen bus and registering backends. Moved this common xen code to a new
function xen_register_ioreq() which can be used by both x86 and ARM machines.
Following functions are moved to hw/xen/xen-hvm-common.c:
xen_vcpu_eport(), xen_vcpu_ioreq(), xen_ram_alloc(), xen_set_memory(),
xen_region_add(), xen_region_del(), xen_io_add(), xen_io_del(),
xen_device_realize(), xen_device_unrealize(),
cpu_get_ioreq_from_shared_memory(), cpu_get_ioreq(), do_inp(),
do_outp(), rw_phys_req_item(), read_phys_req_item(),
write_phys_req_item(), cpu_ioreq_pio(), cpu_ioreq_move(),
cpu_ioreq_config(), handle_ioreq(), handle_buffered_iopage(),
handle_buffered_io(), cpu_handle_ioreq(), xen_main_loop_prepare(),
xen_hvm_change_state_handler(), xen_exit_notifier(),
xen_map_ioreq_server(), destroy_hvm_domain() and
xen_shutdown_fatal_error()
3. Removed static type from below functions:
1. xen_region_add()
2. xen_region_del()
3. xen_io_add()
4. xen_io_del()
5. xen_device_realize()
6. xen_device_unrealize()
7. xen_hvm_change_state_handler()
8. cpu_ioreq_pio()
9. xen_exit_notifier()
4. Replace TARGET_PAGE_SIZE with XC_PAGE_SIZE to match the page side with Xen.
Signed-off-by: Vikram Garhwal <vikram.garhwal@amd.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@amd.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
* Skip Vector set tail when vta is zero
* Move zc* out of the experimental properties
* Mask the implicitly enabled extensions in isa_string based on priv version
* Rework CPU extension validation and validate MISA changes
* Fixup PMP TLB cacheing errors
* Writing to pmpaddr and MML/MMWP correctly triggers TLB flushes
* Fixup PMP bypass checks
* Deny access if access is partially inside a PMP entry
* Correct OpenTitanState parent type/size
* Fix QEMU crash when NUMA nodes exceed available CPUs
* Fix pointer mask transformation for vector address
* Updates and improvements for Smstateen
* Support disas for Zcm* extensions
* Support disas for Z*inx extensions
* Remove unused decomp_rv32/64 value for vector instructions
* Enable PC-relative translation
* Assume M-mode FW in pflash0 only when "-bios none"
* Support using pflash via -blockdev option
* Add vector registers to log
* Clean up reference of Vector MTYPE
* Remove the check for extra Vector tail elements
* Smepmp: Return error when access permission not allowed in PMP
* Fixes for smsiaddrcfg and smsiaddrcfgh in AIA
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEaukCtqfKh31tZZKWr3yVEwxTgBMFAmSJFRoACgkQr3yVEwxT
gBMUkg/8Cuhqpx+zy7MeouVkyhEjUuhtCWyr0WVZBJzDkVEOrlY6TyR0hb5/o1Js
LZf6ZMF6JQDN78bmUct8yFBZBGafey5tyonDCsnD7CNQuLPf2NSjTHhu9n5hKFqF
F8Mpn9iFu6k1pr0iF7FbCccVWuDb3P4h2PaM0iFhmf4uz42BCMYdgJThhvv38xlt
jr6A3dcjTpp8yB+iRCuhL2IU2XVee0XBiDUECqRXd0gmtOtqJNST8L+l8YkLy1VO
WUMe8RCO6NMP7BLJ383WwCDeiFTo0mJebZQ0eR/G1xEhy7c8BBMh/CgQmq2F3wDZ
Q0biaeozADgAaCC7aOAHI+1sAoMhOm1v2WhIVmh+XXUqT9856cKwc7DUPBmzb9Sj
N5Zh+t9WCnZG7qpfxvkDF0Y/aRODMHZ1BW5L/ky9yBtyuRwXOJ6VycZTFyRkSwnN
Gd/s9IClDOP1IP5s4TSMGGdelk4lH97x7fZE/2hxn59lp761JtMxbaEceBtqaBh8
zNMTNN/KHs8LeiIBI2ZZ+nQav452Y6XYBivQ7OdsI8xkjnjG9gfgXXjvX1TIh0ow
Hy5ZxtAtjXty49Gmjkx5VcBx4auJcnRDlLTzoZjTxq1te+gEWpw6O1EsEKasVLZe
uN6PxTOxS3nHvRvPgQc1xNUdhDRqBaYsju6b9YmMxz1uefAjGM0=
=fOTc
-----END PGP SIGNATURE-----
Merge tag 'pull-riscv-to-apply-20230614' of https://github.com/alistair23/qemu into staging
Second RISC-V PR for 8.1
* Skip Vector set tail when vta is zero
* Move zc* out of the experimental properties
* Mask the implicitly enabled extensions in isa_string based on priv version
* Rework CPU extension validation and validate MISA changes
* Fixup PMP TLB cacheing errors
* Writing to pmpaddr and MML/MMWP correctly triggers TLB flushes
* Fixup PMP bypass checks
* Deny access if access is partially inside a PMP entry
* Correct OpenTitanState parent type/size
* Fix QEMU crash when NUMA nodes exceed available CPUs
* Fix pointer mask transformation for vector address
* Updates and improvements for Smstateen
* Support disas for Zcm* extensions
* Support disas for Z*inx extensions
* Remove unused decomp_rv32/64 value for vector instructions
* Enable PC-relative translation
* Assume M-mode FW in pflash0 only when "-bios none"
* Support using pflash via -blockdev option
* Add vector registers to log
* Clean up reference of Vector MTYPE
* Remove the check for extra Vector tail elements
* Smepmp: Return error when access permission not allowed in PMP
* Fixes for smsiaddrcfg and smsiaddrcfgh in AIA
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEaukCtqfKh31tZZKWr3yVEwxTgBMFAmSJFRoACgkQr3yVEwxT
# gBMUkg/8Cuhqpx+zy7MeouVkyhEjUuhtCWyr0WVZBJzDkVEOrlY6TyR0hb5/o1Js
# LZf6ZMF6JQDN78bmUct8yFBZBGafey5tyonDCsnD7CNQuLPf2NSjTHhu9n5hKFqF
# F8Mpn9iFu6k1pr0iF7FbCccVWuDb3P4h2PaM0iFhmf4uz42BCMYdgJThhvv38xlt
# jr6A3dcjTpp8yB+iRCuhL2IU2XVee0XBiDUECqRXd0gmtOtqJNST8L+l8YkLy1VO
# WUMe8RCO6NMP7BLJ383WwCDeiFTo0mJebZQ0eR/G1xEhy7c8BBMh/CgQmq2F3wDZ
# Q0biaeozADgAaCC7aOAHI+1sAoMhOm1v2WhIVmh+XXUqT9856cKwc7DUPBmzb9Sj
# N5Zh+t9WCnZG7qpfxvkDF0Y/aRODMHZ1BW5L/ky9yBtyuRwXOJ6VycZTFyRkSwnN
# Gd/s9IClDOP1IP5s4TSMGGdelk4lH97x7fZE/2hxn59lp761JtMxbaEceBtqaBh8
# zNMTNN/KHs8LeiIBI2ZZ+nQav452Y6XYBivQ7OdsI8xkjnjG9gfgXXjvX1TIh0ow
# Hy5ZxtAtjXty49Gmjkx5VcBx4auJcnRDlLTzoZjTxq1te+gEWpw6O1EsEKasVLZe
# uN6PxTOxS3nHvRvPgQc1xNUdhDRqBaYsju6b9YmMxz1uefAjGM0=
# =fOTc
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 14 Jun 2023 03:17:14 AM CEST
# gpg: using RSA key 6AE902B6A7CA877D6D659296AF7C95130C538013
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6AE9 02B6 A7CA 877D 6D65 9296 AF7C 9513 0C53 8013
* tag 'pull-riscv-to-apply-20230614' of https://github.com/alistair23/qemu: (60 commits)
hw/intc: If mmsiaddrcfgh.L == 1, smsiaddrcfg and smsiaddrcfgh are read-only.
target/riscv: Smepmp: Return error when access permission not allowed in PMP
target/riscv/vector_helper.c: Remove the check for extra tail elements
target/riscv/vector_helper.c: clean up reference of MTYPE
target/riscv: Fix initialized value for cur_pmmask
util/log: Add vector registers to log
docs/system: riscv: Add pflash usage details
riscv/virt: Support using pflash via -blockdev option
hw/riscv: virt: Assume M-mode FW in pflash0 only when "-bios none"
target/riscv: Remove pc_succ_insn from DisasContext
target/riscv: Enable PC-relative translation
target/riscv: Use true diff for gen_pc_plus_diff
target/riscv: Change gen_set_pc_imm to gen_update_pc
target/riscv: Change gen_goto_tb to work on displacements
target/riscv: Introduce cur_insn_len into DisasContext
target/riscv: Fix target address to update badaddr
disas/riscv.c: Remove redundant parentheses
disas/riscv.c: Fix lines with over 80 characters
disas/riscv.c: Remove unused decomp_rv32/64 value for vector instructions
disas/riscv.c: Support disas for Z*inx extensions
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
migrate_ignore_shared() is an optimization that avoids copying memory
that is visible and can be mapped on the target. However, a
memory-backend-ram or a memory-backend-memfd block with the RAM_SHARED
flag set is not migrated when migrate_ignore_shared() is true. This is
wrong, because the block has no named backing store, and its contents will
be lost. To fix, ignore shared memory iff it is a named file. Define a
new flag RAM_NAMED_FILE to distinguish this case.
Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-Id: <1686151116-253260-1-git-send-email-steven.sistare@oracle.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
In preparation for including the number of dirty pages in the
vfio_get_dirty_bitmap() tracepoint, return the number of dirty pages in
cpu_physical_memory_set_dirty_lebitmap() similar to
cpu_physical_memory_sync_dirty_bitmap().
To avoid counting twice when GLOBAL_DIRTY_RATE is enabled, stash the
number of bits set per bitmap quad in a variable (@nbits) and reuse it
there.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230530180556.24441-2-joao.m.martins@oracle.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Allows the struct to be embedded directly into device models without additional
allocation.
Suggested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230612081238.1742-3-shentey@gmail.com>
[PMD: Update MAINTAINERS entry and use SPDX license identifier]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Exporting ParallelState is a precondition for exporing TYPE_ISA_PARALLEL to be
performed in the next patch.
Suggested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230612081238.1742-2-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Added QEMU option 'vpu' to log vector extension registers such as gpr\fpu.
Signed-off-by: Ivan Klokov <ivan.klokov@syntacore.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230410124451.15929-2-ivan.klokov@syntacore.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Use pointer to pass more information of target to disasembler,
such as pass cpu.cfg related information in following commits.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230523093539.203909-2-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
OpenTitanState is the 'machine' (or 'board') state: it isn't
a SysBus device, but inherits from the MachineState type.
Correct the instance size.
Doing so we avoid leaking an OpenTitanState pointer in
opentitan_machine_init().
Fixes: fe0fe4735e ("riscv: Initial commit of OpenTitan machine")
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230520054510.68822-6-philmd@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Expand the DEFINE_MACHINE() macro, converting the class_init()
handler.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230520054510.68822-5-philmd@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
QOM type names are usually defined as TYPE_FOO.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230520054510.68822-4-philmd@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This queue includes several assorted fixes for target/ppc emulation and
XIVE2. It also includes an openpic fix, an avocado fix for ppc64
binaries without slipr and a Kconfig change for MAC_NEWWORLD.
-----BEGIN PGP SIGNATURE-----
iIwEABYKADQWIQQX6/+ZI9AYAK8oOBk82cqW3gMxZAUCZIR6uhYcZGFuaWVsaGI0
MTNAZ21haWwuY29tAAoJEDzZypbeAzFksQsA/jucd+qsZ9mmJ9SYVd4umMnC/4bC
i4CHo/XcHb0DzyBXAQCLxMA+KSTkP+yKv3edra4I5K9qjTW1H+pEOWamh1lvDw==
=EezE
-----END PGP SIGNATURE-----
Merge tag 'pull-ppc-20230610' of https://gitlab.com/danielhb/qemu into staging
ppc patch queue for 2023-06-10:
This queue includes several assorted fixes for target/ppc emulation and
XIVE2. It also includes an openpic fix, an avocado fix for ppc64
binaries without slipr and a Kconfig change for MAC_NEWWORLD.
# -----BEGIN PGP SIGNATURE-----
#
# iIwEABYKADQWIQQX6/+ZI9AYAK8oOBk82cqW3gMxZAUCZIR6uhYcZGFuaWVsaGI0
# MTNAZ21haWwuY29tAAoJEDzZypbeAzFksQsA/jucd+qsZ9mmJ9SYVd4umMnC/4bC
# i4CHo/XcHb0DzyBXAQCLxMA+KSTkP+yKv3edra4I5K9qjTW1H+pEOWamh1lvDw==
# =EezE
# -----END PGP SIGNATURE-----
# gpg: Signature made Sat 10 Jun 2023 06:29:30 AM PDT
# gpg: using EDDSA key 17EBFF9923D01800AF2838193CD9CA96DE033164
# gpg: issuer "danielhb413@gmail.com"
# gpg: Good signature from "Daniel Henrique Barboza <danielhb413@gmail.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 17EB FF99 23D0 1800 AF28 3819 3CD9 CA96 DE03 3164
* tag 'pull-ppc-20230610' of https://gitlab.com/danielhb/qemu: (29 commits)
hw/ppc/Kconfig: MAC_NEWWORLD should always select USB_OHCI_PCI
target/ppc: Implement gathering irq statistics
tests/avocado/tuxrun_baselines: Fix ppc64 tests for binaries without slirp
hw/ppc/openpic: Do not open-code ROUND_UP() macro
target/ppc: Decrementer fix BookE semantics
target/ppc: Fix decrementer time underflow and infinite timer loop
target/ppc: Rework store conditional to avoid branch
target/ppc: Remove larx/stcx. memory barrier semantics
target/ppc: Ensure stcx size matches larx
target/ppc: Fix lqarx to set cpu_reserve
target/ppc: Eliminate goto in mmubooke_check_tlb()
target/ppc: Change ppcemb_tlb_check() to return bool
target/ppc: Simplify ppcemb_tlb_search()
target/ppc: Remove some unneded line breaks
target/ppc: Move ppcemb_tlb_search() to mmu_common.c
target/ppc: Remove "ext" parameter of ppcemb_tlb_check()
target/ppc: Remove single use function
target/ppc: PMU implement PERFM interrupts
target/ppc: Support directed privileged doorbell interrupt (SDOOR)
target/ppc: Fix msgclrp interrupt type
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
While reviewing, the ROUND_UP() macro is easier to figure out.
Besides, the comment confirms we want to round up here.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20230523061546.49031-1-philmd@linaro.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
TIMA addresses are somewhat special and are split in several bit
fields with different meanings. This patch describes it and introduce
macros to more easily access the various fields.
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20230601121331.487207-5-fbarrat@linux.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
During the last patches, TYPE_PIIX3_XEN_DEVICE turned into a clone of
TYPE_PIIX3_DEVICE. Remove this redundancy.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Tested-by: Chuck Zmudzinski <brchuckz@aol.com>
Message-Id: <20230312120221.99183-7-shentey@gmail.com>
Message-Id: <20230403074124.3925-8-shentey@gmail.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
xen_piix3_set_irq() isn't PIIX specific: PIIX is a single PCI device
while xen_piix3_set_irq() maps multiple PCI devices to their respective
IRQs, which is board-specific. Rename xen_piix3_set_irq() to communicate
this.
Also rename XEN_PIIX_NUM_PIRQS to XEN_IOAPIC_NUM_PIRQS since the Xen's
IOAPIC rather than PIIX has this many interrupt routes.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Tested-by: Chuck Zmudzinski <brchuckz@aol.com>
Message-Id: <20230312120221.99183-2-shentey@gmail.com>
Message-Id: <20230403074124.3925-2-shentey@gmail.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
In restructuring to allow for internal emulation of Xen functionality,
I broke compatibility for Xen 4.6 and earlier. Fix this by explicitly
removing support for anything older than 4.7.1, which is also ancient
but it does still build, and the compatibility support for it is fairly
unintrusive.
Fixes: 15e283c5b6 ("hw/xen: Add foreignmem operations to allow redirection to internal emulation")
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
Message-Id: <20230412185102.441523-4-dwmw2@infradead.org>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Only a few important registers are added, especially the SRAM_VER
register.
Signed-off-by: qianfan Zhao <qianfanguijin@163.com>
Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
R40 has two ethernet controllers named as emac and gmac. The emac is
compatibled with A10, and the GMAC is compatibled with H3.
Signed-off-by: qianfan Zhao <qianfanguijin@163.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell