New helper function which translates a qxl physical address into
memory slot and offset. Also applies sanity checks. Factored out
from qxl_phys2virt. No functional change.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1466597244-5938-1-git-send-email-kraxel@redhat.com
iommus can not be added with -device.
cleanups and fixes all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJXe4l4AAoJECgfDbjSjVRpIz4IALye7mKG61/POA4Gqmhalc3d
HnlNSZ2YcKAuvPg7WWkBuRacrQvVY/MbW1mLloG1lY0tdFgZG8Cy+CY6wJg1NE4c
cXd+77vHkIyrnl+Nil+QOgTFiAsMnD+mXHHsnCDw2jGn3JbgVNuCMi7V34fGkQd2
PDkZyYfwTqO3HytuG0/j2Somc9du1gjYdn+9qigfZVgP96jGDojBuJWuuU5flCB3
Kj5xrOuI01XlbdTk71tVjBJBektQurWr6r7GECDqZIpUfc+BI70FU9jPh+OlLTO/
92yi29ncjyStz4tRnf18xoQ8uBgH/tD1xigEUPRtnm1+0i/tgONBL8cAdBF9FBE=
=ABGE
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pc, pci, virtio: new features, cleanups, fixes
iommus can not be added with -device.
cleanups and fixes all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Tue 05 Jul 2016 11:18:32 BST
# gpg: using RSA key 0x281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream: (30 commits)
vmw_pvscsi: remove unnecessary internal msi state flag
e1000e: remove unnecessary internal msi state flag
vmxnet3: remove unnecessary internal msi state flag
mptsas: remove unnecessary internal msi state flag
megasas: remove unnecessary megasas_use_msi()
pci: Convert msi_init() to Error and fix callers to check it
pci bridge dev: change msi property type
megasas: change msi/msix property type
mptsas: change msi property type
intel-hda: change msi property type
usb xhci: change msi/msix property type
change pvscsi_init_msi() type to void
tests: add APIC.cphp and DSDT.cphp blobs
tests: acpi: add CPU hotplug testcase
log: Permit -dfilter 0..0xffffffffffffffff
range: Replace internal representation of Range
range: Eliminate direct Range member access
log: Clean up misuse of Range for -dfilter
pci_register_bar: cleanup
Revert "virtio-net: unbreak self announcement and guest offloads after migration"
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
BlockBackend has only a single pointer to its guest device, so it makes
sure that only a single guest device is attached to it. device-add
returns an error if you try to attach a second device to a BB. In order
to make the error message nicer, -device that manually connects to a
if=none block device get a different message than -drive that implicitly
creates a guest device. The if=... option is stored in DriveInfo.
However, since blockdev-add exists, not every BlockBackend has a
DriveInfo any more. Check that it exists before we dereference it.
QMP reproducer resulting in a segfault:
{"execute":"blockdev-add","arguments":{"options":{"id":"disk","driver":"file","filename":"/tmp/test.img"}}}
{"execute":"device_add","arguments":{"driver":"virtio-blk-pci","drive":"disk"}}
{"execute":"device_add","arguments":{"driver":"virtio-blk-pci","drive":"disk"}}
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Sector-based limits are awkward to think about; in our on-going
quest to move to byte-based interfaces, convert max_transfer_length
and opt_transfer_length. Rename them (dropping the _length suffix)
so that the compiler will help us catch the change in semantics
across any rebased code, and improve the documentation. Use unsigned
values, so that we don't have to worry about negative values and
so that bit-twiddling is easier; however, we are still constrained
by 2^31 of signed int in most APIs.
When a value comes from an external source (iscsi and raw-posix),
sanitize the results to ensure that opt_transfer is a power of 2.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Making all callers special-case 0 as unlimited is awkward,
and we DO have a hard maximum of BDRV_REQUEST_MAX_SECTORS given
our current block layer API limits.
In the case of scsi, this means that we now always advertise a
limit to the guest, even in cases where the underlying layers
previously use 0 for no inherent limit beyond the block layer.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
s->blocksize may be larger than 512, in which case our
tweaks to max_xfer_len and opt_xfer_len must be scaled
appropriately.
CC: qemu-stable@nongnu.org
Reported-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Internal flag msi_used is uncesessary, msi_uninit() could be called
directly, msi_enabled() is enough to check device msi state.
But for migration compatibility, keep the field in structure.
cc: Paolo Bonzini <pbonzini@redhat.com>
cc: Dmitry Fleytman <dmitry@daynix.com>
cc: Markus Armbruster <armbru@redhat.com>
cc: Marcel Apfelbaum <marcel@redhat.com>
cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Internal big flag E1000E_USE_MSI is unnecessary, also is the helper
function: e1000e_init_msi(), e1000e_cleanup_msi(), so, remove them all.
cc: Dmitry Fleytman <dmitry@daynix.com>
cc: Jason Wang <jasowang@redhat.com>
cc: Markus Armbruster <armbru@redhat.com>
cc: Marcel Apfelbaum <marcel@redhat.com>
cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Internal flag msi_used is unnecessary, it has the same effect as msi_enabled().
msi_uninit() could be called directly without risk.
cc: Paolo Bonzini <pbonzini@redhat.com>
cc: Dmitry Fleytman <dmitry@daynix.com>
cc: Markus Armbruster <armbru@redhat.com>
cc: Marcel Apfelbaum <marcel@redhat.com>
cc: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
internal flag msi_in_use in unnecessary, msi_uninit() could be called
directly, and msi_enabled() is enough to check device msi state.
cc: Markus Armbruster <armbru@redhat.com>
cc: Marcel Apfelbaum <marcel@redhat.com>
cc: Paolo Bonzini <pbonzini@redhat.com>
cc: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
megasas overwrites user configuration when msi_init fail to flag internal msi
state, which is unsuitable. megasa_use_msi() is unnecessary, we can call
msi_uninit() directly when unrealize, even no need to call msi_enabled() first.
cc: Hannes Reinecke <hare@suse.de>
cc: Paolo Bonzini <pbonzini@redhat.com>
cc: Markus Armbruster <armbru@redhat.com>
cc: Marcel Apfelbaum <marcel@redhat.com>
cc: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
msi_init() reports errors with error_report(), which is wrong
when it's used in realize().
Fix by converting it to Error.
Fix its callers to handle failure instead of ignoring it.
For those callers who don't handle the failure, it might happen:
when user want msi on, but he doesn't get what he want because of
msi_init fails silently.
cc: Gerd Hoffmann <kraxel@redhat.com>
cc: John Snow <jsnow@redhat.com>
cc: Dmitry Fleytman <dmitry@daynix.com>
cc: Jason Wang <jasowang@redhat.com>
cc: Michael S. Tsirkin <mst@redhat.com>
cc: Hannes Reinecke <hare@suse.de>
cc: Paolo Bonzini <pbonzini@redhat.com>
cc: Alex Williamson <alex.williamson@redhat.com>
cc: Markus Armbruster <armbru@redhat.com>
cc: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
>From bit to enum OnOffAuto.
cc: Michael S. Tsirkin <mst@redhat.com>
cc: Markus Armbruster <armbru@redhat.com>
cc: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
>From bit to enum OnOffAuto.
cc: Hannes Reinecke <hare@suse.de>
cc: Paolo Bonzini <pbonzini@redhat.com>
cc: Michael S. Tsirkin <mst@redhat.com>
cc: Markus Armbruster <armbru@redhat.com>
cc: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
>From uint32 to enum OnOffAuto, and give it a shorter name.
cc: Paolo Bonzini <pbonzini@redhat.com>
cc: Michael S. Tsirkin <mst@redhat.com>
cc: Markus Armbruster <armbru@redhat.com>
cc: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
>From uint32 to enum OnOffAuto.
cc: Gerd Hoffmann <kraxel@redhat.com>
cc: Michael S. Tsirkin <mst@redhat.com>
cc: Markus Armbruster <armbru@redhat.com>
cc: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
>From bit to enum OnOffAuto
cc: Gerd Hoffmann <kraxel@redhat.com>
cc: Michael S. Tsirkin <mst@redhat.com>
cc: Markus Armbruster <armbru@redhat.com>
cc: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Nobody use its return value, so change the type to void.
cc: Michael S. Tsirkin <mst@redhat.com>
cc: Paolo Bonzini <pbonzini@redhat.com>
cc: Markus Armbruster <armbru@redhat.com>
cc: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Dmitry Fleytman <dmitry@daynix.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This adds proper support for translating real mode addresses based
on the combination of HV and LPCR bits. This handles HRMOR offset
for hypervisor real mode, and both RMA and VRMA modes for guest
real mode. PAPR mode adjusts the offsets appropriately to match the
RMA used in TCG, but we need to limit to the max supported by the
implementation (16G).
This includes some fixes by Cédric Le Goater <clg@kaod.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
[dwg: Adjusted for differences in my version of the prereq patches]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The segment page shift parameter is never used. Let's remove it.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This adds support for Dynamic DMA Windows (DDW) option defined by
the SPAPR specification which allows to have additional DMA window(s)
The "ddw" property is enabled by default on a PHB but for compatibility
the pseries-2.6 machine and older disable it.
This also creates a single DMA window for the older machines to
maintain backward migration.
This implements DDW for PHB with emulated and VFIO devices. The host
kernel support is required. The advertised IOMMU page sizes are 4K and
64K; 16M pages are supported but not advertised by default, in order to
enable them, the user has to specify "pgsz" property for PHB and
enable huge pages for RAM.
The existing linux guests try creating one additional huge DMA window
with 64K or 16MB pages and map the entire guest RAM to. If succeeded,
the guest switches to dma_direct_ops and never calls TCE hypercalls
(H_PUT_TCE,...) again. This enables VFIO devices to use the entire RAM
and not waste time on map/unmap later. This adds a "dma64_win_addr"
property which is a bus address for the 64bit window and by default
set to 0x800.0000.0000.0000 as this is what the modern POWER8 hardware
uses and this allows having emulated and VFIO devices on the same bus.
This adds 4 RTAS handlers:
* ibm,query-pe-dma-window
* ibm,create-pe-dma-window
* ibm,remove-pe-dma-window
* ibm,reset-pe-dma-window
These are registered from type_init() callback.
These RTAS handlers are implemented in a separate file to avoid polluting
spapr_iommu.c with PCI.
This changes sPAPRPHBState::dma_liobn to an array to allow 2 LIOBNs
and updates all references to dma_liobn. However this does not add
64bit LIOBN to the migration stream as in fact even 32bit LIOBN is
rather pointless there (as it is a PHB property and the management
software can/should pass LIOBNs via CLI) but we keep it for the backward
migration support.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
New VFIO_SPAPR_TCE_v2_IOMMU type supports dynamic DMA window management.
This adds ability to VFIO common code to dynamically allocate/remove
DMA windows in the host kernel when new VFIO container is added/removed.
This adds a helper to vfio_listener_region_add which makes
VFIO_IOMMU_SPAPR_TCE_CREATE ioctl and adds just created IOMMU into
the host IOMMU list; the opposite action is taken in
vfio_listener_region_del.
When creating a new window, this uses heuristic to decide on the TCE table
levels number.
This should cause no guest visible change in behavior.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
[dwg: Added some casts to prevent printf() warnings on certain targets
where the kernel headers' __u64 doesn't match uint64_t or PRIx64]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
There are going to be multiple IOMMUs per a container. This moves
the single host IOMMU parameter set to a list of VFIOHostDMAWindow.
This should cause no behavioral change and will be used later by
the SPAPR TCE IOMMU v2 which will also add a vfio_host_win_del() helper.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This makes use of the new "memory registering" feature. The idea is
to provide the userspace ability to notify the host kernel about pages
which are going to be used for DMA. Having this information, the host
kernel can pin them all once per user process, do locked pages
accounting (once) and not spent time on doing that in real time with
possible failures which cannot be handled nicely in some cases.
This adds a prereg memory listener which listens on address_space_memory
and notifies a VFIO container about memory which needs to be
pinned/unpinned. VFIO MMIO regions (i.e. "skip dump" regions) are skipped.
The feature is only enabled for SPAPR IOMMU v2. The host kernel changes
are required. Since v2 does not need/support VFIO_IOMMU_ENABLE, this does
not call it when v2 is detected and enabled.
This enforces guest RAM blocks to be host page size aligned; however
this is not new as KVM already requires memory slots to be host page
size aligned.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
[dwg: Fix compile error on 32-bit host]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The sPAPR TCE tables manage 2 copies when VFIO is using an IOMMU -
a guest view of the table and a hardware TCE table. If there is no VFIO
presense in the address space, then just the guest view is used, if
this is the case, it is allocated in the KVM. However since there is no
support yet for VFIO in KVM TCE hypercalls, when we start using VFIO,
we need to move the guest view from KVM to the userspace; and we need
to do this for every IOMMU on a bus with VFIO devices.
This implements the callbacks for the sPAPR IOMMU - notify_started()
reallocated the guest view to the user space, notify_stopped() does
the opposite.
This removes explicit spapr_tce_set_need_vfio() call from PCI hotplug
path as the new callbacks do this better - they notify IOMMU at
the exact moment when the configuration is changed, and this also
includes the case of PCI hot unplug.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
During CPU core realization, we create all the thread objects and parent
them to the core object in a loop. However, the realization of thread
objects is done separately by walking the threads of a core using
object_child_foreach(). With this, there is no guarantee on the order
in which the child thread objects get realized. Since CPU device tree
properties are currently derived from the CPU thread object, we assume
thread0 of the core to be the representative thread of the core when
creating device tree properties for the core. If thread0 is not the
first thread that gets realized, then we would end up having an
incorrect dt_id for the core and this causes hotplug failures from
the guest.
Fix this by realizing each thread object by walking the core's thread
object list thereby ensuring that thread0 and other threads are always
realized in the correct order.
Future TODO: CPU DT nodes are per-core properties and we should
ideally base the creation of CPU DT nodes on core objects rather than
the thread objects.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Users of struct Range mess liberally with its members, which makes
refactoring hard. Create a set of methods, and convert all users to
call them instead of accessing members. The methods have carefully
worded contracts, and use assertions to check them.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
place relevant code tegother, make the code easier to read
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
A set of SPI flash slaves is attached under the flash controllers of
the palmetto platform. "n25q256a" flash modules are used for the BMC
and "mx25l25635e" for the host. These types are common in the
OpenPower ecosystem.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-id: 1467138270-32481-9-git-send-email-clg@kaod.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Each controller on the ast2400 has a memory range on which it maps its
flash module slaves. Each slave is assigned a memory segment for its
mapping that can be changed at bootime with the Segment Address
Register. This is not supported in the current implementation so we
are using the defaults provided by the specs.
Each SPI flash slave can then be accessed in two modes: Command and
User. When in User mode, accesses to the memory segment of the slaves
are translated in SPI transfers. When in Command mode, the HW
generates the SPI commands automatically and the memory segment is
accessed as if doing a MMIO. Other SPI controllers call that mode
linear addressing mode.
For this purpose, we are adding below each crontoller an array of
structs gathering for each SPI flash module, a segment rank, a
MemoryRegion to handle the memory accesses and the associated SPI
slave device, which should be a m25p80.
Only the User mode is supported for now but we are preparing ground
for the Command mode. The framework is sufficient to support Linux.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-id: 1467138270-32481-8-git-send-email-clg@kaod.org
[PMM: Use g_new0() rather than g_malloc0()]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The Aspeed AST2400 soc includes a static memory controller for the BMC
which supports NOR, NAND and SPI flash memory modules. This controller
has two modes : the SMC for the legacy interface which supports only
one module and the FMC for the new interface which supports up to five
modules. The AST2400 also includes a SPI only controller used for the
host firmware, commonly called BIOS on Intel. It can be used in three
mode : a SPI master, SPI slave and SPI pass-through
Below is the initial framework for the SMC controller (FMC mode only)
and the SPI controller: the sysbus object, MMIO for registers
configuration and controls. Each controller has a SPI bus and a
configurable number of CS lines for SPI flash slaves.
The differences between the controllers are small, so they are
abstracted using indirections on the register numbers.
Only SPI flash modules are supported.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-id: 1467138270-32481-7-git-send-email-clg@kaod.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: added one missing error_propagate]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This allows specifying the property via -drive if=none and creating
the flash device with -device.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-id: 1467138270-32481-6-git-send-email-clg@kaod.org
[clg: added an extra fix for sabrelite_init()
keeping the test on flash_dev did not seem necessary. ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The maximum amount of storage that can be addressed by the m25p80 command
set is 4 GiB. However, cur_addr is currently a 64-bit integer. To avoid
further problems related to sign extension of signed 32-bit integer
expressions, change cur_addr to a 32 bit integer. Preserve migration
format by adding a dummy 4-byte field in place of the (big-endian)
high four bytes in the formerly 64-bit cur_addr field.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-id: 1467138270-32481-5-git-send-email-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
s->cur_addr can be made to point outside s->storage, either by
writing a value >= 128 to s->ear (because s->ear * MAX_3BYTES_SIZE
is a signed integer and sign-extends into the 64-bit cur_addr),
or just by writing an address beyond the size of the flash being
emulated. Avoid the sign extension to make the code cleaner, and
on top of that mask s->cur_addr to s->size.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-id: 1467138270-32481-4-git-send-email-clg@kaod.org
Reviewed by: Marcin Krzeminski <marcin.krzeminski@nokia.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When doing a read-modify-write cycle, QEMU uses the iovec after returning
from blk_aio_pwritev. m25p80 puts the iovec on the stack of blk_aio_pwritev's
caller, which causes trouble in this case. This has been a problem
since commit 243e6f6 ("m25p80: Switch to byte-based block access",
2016-05-12) started doing writes at a smaller granularity than 512 bytes.
In principle however it could have broken before when using -drive
if=mtd,cache=none on a disk with 4K native sectors.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-id: 1467138270-32481-3-git-send-email-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This enables qemu to handle late inits and report errors. All the SSI
slave routine names were changed accordingly. Code was modified to
handle errors when possible (m25p80 and ssi-sd)
Tested with the m25p80 slave object.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-id: 1467138270-32481-2-git-send-email-clg@kaod.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add a minimal model for the devcfg device which is part of Zynq.
This model supports DMA capabilities and interrupt generation.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 83df49d8fa2d203a421ca71620809e4b04754e65.1467053537.git.alistair.francis@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add a helper that will scan a static RegisterAccessInfo Array
and populate a container MemoryRegion with registers as defined.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Message-id: 347b810b2799e413c98d5bbeca97bcb1557946c3.1467053537.git.alistair.francis@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
QOMify registers as a child of TYPE_DEVICE. This allows registers to
define GPIOs.
Define an init helper that will do QOM initialisation.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: KONRAD Frederic <fred.konrad@greensocs.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 2545f71db26bf5586ca0c08a3e3cf1b217450552.1467053537.git.alistair.francis@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add memory io handlers that glue the register API to the memory API.
Just translation functions at this stage. Although it does allow for
devices to be created without all-in-one mmio r/w handlers.
This patch also adds the RegisterInfoArray struct, which allows all of
the individual RegisterInfo structs to be grouped into a single memory
region.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Message-id: f7704d8ac6ac0f469ed35401f8151a38bd01468b.1467053537.git.alistair.francis@xilinx.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This API provides some encapsulation of registers and factors out some
common functionality to common code. Bits of device state (usually MMIO
registers) often have all sorts of access restrictions and semantics
associated with them. This API allows you to define what those
restrictions are on a bit-by-bit basis.
Helper functions are then used to access the register which observe the
semantics defined by the RegisterAccessInfo struct.
Some features:
Bits can be marked as read_only (ro field)
Bits can be marked as write-1-clear (w1c field)
Bits can be marked as reserved (rsvd field)
Reset values can be defined (reset)
Bits can be marked clear on read (cor)
Pre and post action callbacks can be added to read and write ops
Verbose debugging info can be enabled/disabled
Useful for defining device register spaces in a data driven way. Cuts
down on a lot of the verbosity and repetition in the switch-case blocks
in the standard foo_mmio_read/write functions.
Also useful for automated generation of device models from hardware
design sources.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 40d62c7e1bf6e63bb4193ec46b15092a7d981e59.1467053537.git.alistair.francis@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Since QEMU performs cacheable accesses to guest memory when doing DMA
as part of the implementation of emulated PCI devices, guest drivers
should use cacheable accesses as well when running under KVM. Since this
essentially means that emulated PCI devices are DMA coherent, set the
'dma-coherent' DT property on the PCIe host controller DT node.
This brings the DT description into line with the ACPI description,
which already marks the PCI bridge as cache coherent (see commit
bc64b96c98).
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Message-id: 1467134090-5099-1-git-send-email-ard.biesheuvel@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Starting QEMU with -S results in current_cpu containing its initial
value of NULL. It is however possible to connect to such QEMU instance
and query various CPU registers, one example being CPUID, and doing that
results in QEMU segfaulting.
Using qemu_get_cpu(0) seem reasonable enough given that ARMv7M
architecture is a single core architecture.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The imx boards were all incorrectly creating ROMs using
memory_region_init_rom_device() with a NULL ops pointer. This
will cause QEMU to abort if the guest tries to write to the
ROM. Switch to the new memory_region_init_rom() instead.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1467122287-24974-3-git-send-email-peter.maydell@linaro.org
This reverts commit 1f8828ef57.
Cc: qemu-stable@nongnu.org
Reported-by: Robin Geuze <robing@transip.nl>
Tested-by: Robin Geuze <robing@transip.nl>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
virtio migrates the low 32 feature bits twice, the first copy is there
for compatibility but ever since
019a3edbb25f1571e876f8af1ce4c55412939e5d: ("virtio: make features 64bit
wide") it's ignored on load. This is wrong since virtio_net_load tests
self announcement and guest offloads before the second copy including
high feature bits is loaded. This means that self announcement, control
vq and guest offloads are all broken after migration.
Fix it up by loading low feature bits: somewhat ugly since high and low
bits become out of sync temporarily, but seems unavoidable for
compatibility. The right thing to do for new features is probably to
test the host features, anyway.
Fixes: 019a3edbb2
("virtio: make features 64bit wide")
Cc: qemu-stable@nongnu.org
Reported-by: Robin Geuze <robing@transip.nl>
Tested-by: Robin Geuze <robing@transip.nl>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The host notifier rework tried both to unify host notifiers across
transports and plug a possible hole during host notifier
re-assignment. Unfortunately, this meant a change in semantics that
breaks vhost and iSCSI+dataplane.
As the minimal fix, keep the common host notifier code but revert
to the old semantics so that we have time to figure out the proper
fix.
Fixes: 6798e245a3 ("virtio-bus: common ioeventfd infrastructure")
Reported-by: Peter Lieven <pl@kamp.de>
Reported-by: Jason Wang <jasowang@redhat.com>
Reported-by: Marc-André Lureau <marcandre.lureau@gmail.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Jason Wang <jasowang@redhat.com>
Tested-by: Jason Wang <jasowang@redhat.com>
Tested-by: Peter Lieven <pl@kamp.de>
PcPciInfo has two (ill-named) members: Range w32 is the PCI hole, and
w64 is the PCI64 hole.
Three users:
* I440FXState and MCHPCIState have a member PcPciInfo pci_info, but
only pci_info.w32 is actually used. This is confusing. Replace by
Range pci_hole.
* acpi_build() uses auto PcPciInfo pci_info to forward both PCI holes
from acpi_get_pci_info() to build_dsdt(). Replace by two variables
Range pci_hole, pci_hole64. Rename acpi_get_pci_info() to
acpi_get_pci_holes().
PcPciInfo is now unused; drop it.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Range pci_info.w32 records the location of the PCI hole.
It's initialized to empty when QOM zeroes I440FXState. That's a fine
value for a still unknown PCI hole.
i440fx_init() sets pci_info.w32.begin = below_4g_mem_size. Changes
the PCI hole from empty to [below_4g_mem_size, UINT64_MAX]. That's a
bogus value.
i440fx_pcihost_initfn() sets pci_info.end = IO_APIC_DEFAULT_ADDRESS.
Since i440fx_init() ran already, this changes the PCI hole to
[below_4g_mem_size, IO_APIC_DEFAULT_ADDRESS-1]. That's the correct
value.
Setting the bounds of the PCI hole in two separate places is
confusing, and begs the question whether the bogus intermediate value
could be used by something, or what would happen if we somehow managed
to realize an i440FX device without having run the board init function
i440fx_init() first.
Avoid the confusion by setting the (constant) upper bound along with
the lower bound in i440fx_init().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Since iommu devices can be created with '-device' there is
no need to keep iommu as machine and mch property.
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Use the standard '-device intel-iommu' to create the IOMMU device.
The legacy '-machine,iommu=on' can still be used.
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Allow adding sysbus devices with -device on Q35.
At first Q35 will support only intel-iommu to be added this way,
however the command line will support all sysbus devices.
Mark with 'cannot_instantiate_with_device_add_yet' the ones
causing immediate problems (e.g. crashes).
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Skip bus_master_enable region creation on PCI device init
in order to be sure the IOMMU device (if present) would
be created in advance. Add this memory region at machine_done time.
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Mac99's PCI root bus is not part of a host bridge,
realize it manually.
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Commit "8156d48 pc: allow raising low memory via max-ram-below-4g
option" causes a regression on xen, because it uses a different
memory split.
This patch initializes max-ram-below-4g to zero and leaves the
initialization to the memory initialization functions. That way
they can pick different default values (max-ram-below-4g is zero
still) or use the user supplied value (max-ram-below-4g is non-zero).
Also skip the whole ram split calculation on Xen. xen_ram_init()
does its own split calculation anyway so it is superfluous, also
this way xen_ram_init can actually see whenever max-ram-below-4g
is zero or not.
Reported-by: Anthony PERARD <anthony.perard@citrix.com>
Tested-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iEYEABECAAYFAld2ZGoACgkQAvw66wEB28LbNQCfbKhlgcwRvD/F1B5IFQErRkLf
rBsAnR5QQhl8eJK+Dfdiy4H/mjKuXHyN
=6o/q
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/gkurz/tags/for-upstream' into staging
Only trivial fixes.
# gpg: Signature made Fri 01 Jul 2016 13:39:06 BST
# gpg: using DSA key 0x02FC3AEB0101DBC2
# gpg: Good signature from "Greg Kurz <gkurz@fr.ibm.com>"
# gpg: aka "Greg Kurz <groug@free.fr>"
# gpg: aka "Greg Kurz <gkurz@linux.vnet.ibm.com>"
# gpg: aka "Gregory Kurz (Groug) <groug@free.fr>"
# gpg: aka "Gregory Kurz (Cimai Technology) <gkurz@cimai.com>"
# gpg: aka "Gregory Kurz (Meiosys Technology) <gkurz@meiosys.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 2BD4 3B44 535E C0A7 9894 DBA2 02FC 3AEB 0101 DBC2
* remotes/gkurz/tags/for-upstream:
9p: synth: drop v9fs_ prefix
9p: don't include <sys/uio.h>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Here's the current ppc patch queue. This is a fairly large batch,
containing:
* A number of further preliminary patches towards full hypervisor
mode emulation
* Some further fixes / cleanups for the recently merged device_add
based CPU hotplug
* Preliminary patches towards supporting a native (rather than
paravirtualized) XICS device. This will be needed to emulate a
physical Power machine, including hypervisor capabilities
* Assorted bug fixes
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=KhVy
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-2.7-20160701' into staging
ppc patch queue 2016-07-01
Here's the current ppc patch queue. This is a fairly large batch,
containing:
* A number of further preliminary patches towards full hypervisor
mode emulation
* Some further fixes / cleanups for the recently merged device_add
based CPU hotplug
* Preliminary patches towards supporting a native (rather than
paravirtualized) XICS device. This will be needed to emulate a
physical Power machine, including hypervisor capabilities
* Assorted bug fixes
# gpg: Signature made Fri 01 Jul 2016 06:56:35 BST
# gpg: using RSA key 0x6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-2.7-20160701: (23 commits)
qmp: fix spapr example of query-hotpluggable-cpus
spapr: drop duplicate variable in spapr_core_release()
spapr: do proper error propagation in spapr_cpu_core_realize_child()
spapr: drop reference on child object during core realization
spapr: Restore support for 970MP and POWER8NVL CPU cores
target-ppc: gen_pause for instructions: yield, mdoio, mdoom, miso
ppc/xics: Replace "icp" with "xics" in most places
ppc/xics: Implement H_IPOLL using an accessor
ppc/xics: Move SPAPR specific code to a separate file
ppc/xics: Rename existing xics to xics_spapr
ppc: Fix 64K pages support in full emulation
target-ppc: Eliminate redundant and incorrect function booke206_page_size_to_tlb
spapr: Restore support for older PowerPC CPU cores
spapr: fix write-past-end-of-array error in cpu core device init code
hw/ppc/spapr: Add some missing hcall function set strings
ppc: Print HSRR0/HSRR1 in "info registers"
ppc: LPCR is a HV resource
ppc: Initial HDEC support
ppc: Enforce setting MSR:EE,IR and DR when MSR:PR is set
ppc: Fix conditions for delivering external interrupts to a guest
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This patch changes spapr_cpu_core_realize_child() to have a local error
pointer and use error_propagate() as it is supposed to be done.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
When a core is being realized, we create a child object for each thread
of the core.
The child is first initialized with object_initialize() which sets its ref
count to 1, and then added to the core with object_property_add_child()
which bumps the ref count to 2.
When the core gets released, object_unparent() decreases the ref count to 1,
and we g_free() the object: we hence loose the reference on an unfinalized
object. This is likely to cause random crashes.
Let's drop the extra reference as soon as we don't need it, after the
thread is added to the core.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Introduction of core based CPU hotplug for PowerPC sPAPR didn't
add support for 970MP and POWER8NVL based core types. Add support for
the same.
While we are here, add support for explicit specification of POWER5+_v2.1
core type.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The "ICP" is a different object than the "XICS". For historical reasons,
we have a number of places where we name a variable "icp" while it contains
a XICSState pointer. There *is* an ICPState structure too so this makes
the code really confusing.
This is a mechanical replacement of all those instances to use the name
"xics" instead. There should be no functional change.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
[spapr_cpu_init has been moved to spapr_cpu_core.c, change there]
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
None of the other presenter functions directly mucks with the
internal state, so don't do it there either.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Leave the core ICP/ICS logic in xics.c and move the top level
class wrapper, hypercall and RTAS handlers to xics_spapr.c
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
[add cpu.h in xics_spapr.c, move set_nr_irqs and set_nr_servers to
xics_spapr.c]
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The common class doesn't change, the KVM one is sPAPR specific. Rename
variables and functions to xics_spapr.
Retain the type name as "xics" to preserve migration for existing sPAPR
guests.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Eliminate redundant and incorrect booke206_page_size_to_tlb function
from ppce500_spin.c in preference to previously existing but newly
exported definition from e500.c
Defect analysis:
The booke206_page_size_to_tlb function in e500.c was updated in commit
2bd9543 "ppc: booke206: use MAV=2.0 TSIZE definition, fix 4G pages" to
reflect a change in the definition of MAS1_TSIZE_SHIFT from 8
(corresponding to a min TLB page size of 4kb) to a value of 7 (TLB
page size 2k). The booke206_page_size_to_tlb() function defined in
ppce500_spin.c was never updated to reflect the change in
MAS1_TSIZE_SHIFT.
In http://lists.nongnu.org/archive/html/qemu-ppc/2016-06/msg00533.html,
Scott Wood suggested this "root cause" explanation:
SW> The patch that changed MAS1_TSIZE_SHIFT from 8 to 7 was around the
SW> same time as the patch that added this code, which is probably why
SW> adjusting it got missed. Commit 2bd9543cd3 did update the
SW> equivalent code in ppce500_mpc8544ds.c, which now resides in
SW> hw/ppc/e500.c and has been changed to not assume a power-of-2
SW> size. The ppce500_spin version should be eliminated.
Signed-off-by: Aaron Larson <alarson@ddci.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Introduction of core based CPU hotplug for PowerPC sPAPR didn't
add support for 970 and POWER5+ based core types. Add support for
the same.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This fixes a potential QEMU crash introduced by commit 3b54254966.
Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Add "hcall-sprg0" (for H_SET_SPRG0), "hcall-copy" (for H_PAGE_INIT)
and "hcall-debug" (for H_LOGICAL_CI_LOAD/STORE) to the property
"ibm,hypertas-functions" to indicate that we support these hypercalls.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The current behaviour isn't completely right, as for the DEC, we
don't properly re-arm when wrapping around, but I will fix this
in a separate patch.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
[clg: fixed checkpatch.pl errors ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
We don't currently support the MemoryRegionIOMMUOps notifier, so throw
an error should a device require it.
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Peter Xu <peterx@redhat.com>
Tested-by: Peter Xu <peterx@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The IOMMU driver may change behavior depending on whether a notifier
client is present. In the case of POWER, this represents a change in
the visibility of the IOTLB, for other drivers such as intel-iommu and
future AMD-Vi emulation, notifier support is not yet enabled and this
provides the opportunity to flag that incompatibility.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Peter Xu <peterx@redhat.com>
Tested-by: Peter Xu <peterx@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
[new log & extracted from [PATCH qemu v17 12/12] spapr_iommu, vfio, memory: Notify IOMMU about starting/stopping listening]
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The kernel currently exposes the SR-IOV capability as read-only
through vfio-pci. This is sufficient to protect the host kernel, but
has the potential to confuse guests without further virtualization.
In particular, OVMF tries to size the VF BARs and comes up with absurd
results, ending with an assert. There's not much point in adding
virtualization to a read-only capability, so we simply hide it for
now. If the kernel ever enables SR-IOV virtualization, we should
easily be able to test it through VF BAR sizing or explicit flags.
Testing whether we should parse extended capabilities is also pulled
into the function to keep these assumptions in one place.
Tested-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
For vfio pcie device, we could expose the extended capability on
PCIE bus. due to add a new pcie capability at the tail of the chain,
in order to avoid config space overwritten, we introduce a copy config
for parsing extended caps. and rebuild the pcie extended config space.
Signed-off-by: Chen Fan <chen.fan.fnst@cn.fujitsu.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Commit 2d82f8a3cd ("vfio/pci: Convert all MemoryRegion to dynamic
alloc and consistent functions") converted VFIOPCIDevice.vga to be
dynamically allocted, negating the need for VFIOPCIDevice.has_vga.
Unfortunately not all of the has_vga users were converted, nor was
the field removed from the structure. Correct these oversights.
Reported-by: Peter Maloney <peter.maloney@brockmann-consult.de>
Tested-by: Peter Maloney <peter.maloney@brockmann-consult.de>
Fixes: 2d82f8a3cd ("vfio/pci: Convert all MemoryRegion to dynamic alloc and consistent functions")
Fixes: https://bugs.launchpad.net/qemu/+bug/1591628
Cc: qemu-stable@nongnu.org
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The link property that was added to the pcspk device has the wrong type:
it is only correct for TCG and for KVM's userspace or split irqchip
options. The default KVM option (fully in-kernel irqchip) breaks
because it uses a PIT whose type is a sibling of TYPE_I8254.
Fixes: 873b4d3f05
Tested-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1467298657-6588-1-git-send-email-pbonzini@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Otherwise, a serial port can get stuck if it is migrated while flow control
is in effect.
Tested-by: Bret Ketchum <bcketchum@gmail.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Otherwise, this can cause serial_xmit to be entered with LSR.TEMT=0,
which is invalid and causes an assertion failure.
Reported-by: Bret Ketchum <bcketchum@gmail.com>
Tested-by: Bret Ketchum <bcketchum@gmail.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
g_source_attach can return any value between 1 and UINT_MAX if you let
QEMU run long enough. However, qemu_chr_fe_add_watch can also return
a negative errno value when the device is disconnected or does not
support chr_add_watch. Change it to return zero to avoid overloading
these values.
Fix the cadence_uart which asserts in this case (easily obtained with
"-serial pty").
Tested-by: Bret Ketchum <bcketchum@gmail.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
serial_xmit starts transmission of whatever is in the transmitter
register, THR or FIFO; serial_watch_cb is a wrapper around it and is
only used as a qemu_chr_fe_add_watch callback.
Tested-by: Bret Ketchum <bcketchum@gmail.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move common code outside the if, and reset tsr_retry even in loopback mode.
Right now it cannot become non-zero, but it will be possible as soon as
we start respecting the baud rate.
Tested-by: Bret Ketchum <bcketchum@gmail.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It can never become negative; reflect this in the type of the field
and simplify the conditions.
Tested-by: Bret Ketchum <bcketchum@gmail.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In function pci_assign_dev_load_option_rom, For those pci devices don't
have 'rom' file under sysfs or if loading ROM from external file, The
function returns NULL, and won't set the passed 'size' variable.
In these 2 cases, qemu still reports "Invalid ROM" error message, Users
may be confused by it.
Signed-off-by: Lin Ma <lma@suse.com>
Message-Id: <1466010327-22368-1-git-send-email-lma@suse.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit 926cde5 ("scsi: esp: make cmdbuf big enough for maximum CDB size",
2016-06-16) changed the size of a migrated field. Split it in two
parts, and only migrate the second part in a new vmstate version.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The MC146818 RTC device has output IRQ line. Currently the corresponding field
is only accessible through direct access. Such access violates Qemu model.
The patch makes the field accessible through GPIO. It also updates the setting
of the IRQ during initialization.
Signed-off-by: Efimov Vasily <real@ispras.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently a direct access to the device structure field is used to connect ISA
device IRQ to the bus. GPIO access should be used instead if possible.
The patch adds wrapper isa_connect_gpio_out. The function connects specified
output GPIO to specified ISA IRQ.
Signed-off-by: Efimov Vasily <real@ispras.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The isa_bus_irqs function initializes ISA bus IRQ array pointer with specified
value.
Previously the ICH9 LPC bridge model did not have its own IRQs but
only IRQ pointer cache. And same GSI were used for ISA bus and other sources
behind the bridge (PCI, SCI). Hence, the pc_q35_init was only possible place to
setup both ISA bus IRQs and the bridge IRQ cache.
As a result, the call of isa_bus_irqs was made from pc_q35_init.
Now the ICH9 LPC bridge has its own output IRQs which are connected to GSI. The
output IRQs are already used to route IRQs from PCI and SCI.
The patch makes the ICH9 LPC bridge output IRQs to used for ISA bus too.
Signed-off-by: Efimov Vasily <real@ispras.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The ICH9 LPC bridge has 24 output IRQs connected to GSI. Currently the IRQs are
referenced by pointers. The pointers are initialized at startup by direct access
to the structure fields. This violates Qemu device model.
The patch makes the IRQs handling to use GPIO model.
Signed-off-by: Efimov Vasily <real@ispras.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
ich9->pic and ich9->ioapic differ for the first 16 GSIs (because
ich9->pic is wired to 8259+IOAPIC but ich9->ioapic is wired to
IOAPIC only). However, ich9->ioapic is never used for the first
16 GSIs, so the two vectors can be merged.
Reviewed-by: Efimov Vasily <real@ispras.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Make ich9_lpc_update_pic take care only of GSIs 0-15, and
ich9_lpc_update_apic take care only of GSIs 16-23. Assert
that they are called with the correct GSI indices.
Reviewed-by: Efimov Vasily <real@ispras.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
An asserted pirq can be disabled and the corresponding GSIs
should then go down to 0. However, because of the conditional in
ich9_lpc_update_by_pirq, the legacy 8259 pin could remain stuck to 1.
Reviewed-by: Efimov Vasily <real@ispras.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Gerd Hoffmann