Switch to the prebuilt xtensa toolchains release 2020.07.
Drop csp toolchain as the csp core is not a part of QEMU.
Add de233_fpu and dsp3400 toolchains to enable DFPU and FPU2000 tests.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
[AJB: fix path in configure.sh]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200708082347.27318-1-jcmvbkbc@gmail.com>
Message-Id: <20200709141327.14631-13-alex.bennee@linaro.org>
I only spotted this in the small window between my testing with my
registry while waiting for the gitlab PR to go in. As we pre-pull the
registry image we know if that fails there isn't any point attempting
to use the cache. Fall back to the way we used to do it at that point.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200709141327.14631-12-alex.bennee@linaro.org>
In 06c4cc3660, we split the multiplication in two parts to avoid
a clang warning. But because double still rounds to 53 bits, this
does not provide additional precision beyond multiplication by
nextafter(0x1p64, 0), the largest representable value smaller
than 2**64.
However, since we have eliminated 1.0, mutiplying by 2**64 produces
a better distribution of input values to the output values.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200626200950.1015121-3-richard.henderson@linaro.org>
Since the seed must be non-zero, subtracting 1 means puts the
rate in 0..UINT64_MAX-1, which allows the 0 and UINT64_MAX
thresholds to corrspond to 0% (never) and 100% (always).
Suggested-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200626200950.1015121-2-richard.henderson@linaro.org>
If we want to continue to split build and check phase it seems like a
good idea to allow building of the tests during our multi-threaded
build phase.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Cc: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20200701135652.1366-40-alex.bennee@linaro.org>
Total execution time with "-m slow" and x86_64 QEMU, drops from 3
minutes 15 seconds, down to 54 seconds.
Individual tests drop from 17-20 seconds, down to 3-4 seconds.
The cost of this change is that any QOM bugs resulting in the test
failure will not be directly associated with the device that caused
the failure. The test case is not frequently identifying such bugs
though, and the cause is likely easily visible in the patch series
that causes the failure. So overall the shorter running time is
considered the more important factor.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
[thuth: Add the tree check to test_device_intro_none() and
test_device_intro_abstract(), too, just to be sure...]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200710060719.22386-1-thuth@redhat.com>
We happily use all the cross images for both cross-building QEMU as
well as building the linux-user tests. However calling docker from
within docker seems not to work. As we can build in Debian anyway why
not include an image that has all the compilers available for
non-docker invocation.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200701135652.1366-33-alex.bennee@linaro.org>
We were missing a bunch of compilers which we could use if they were
locally installed. The defaults are based on Debian as they seem to be
the best distro for well distributed cross-build compilers.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200701135652.1366-32-alex.bennee@linaro.org>
As part of migrating things from Travis to GitLab add the acceptance
tests. To do this:
- rename system1 to system-ubuntu-main
- rename system2 to system-fedora-misc
- split into build/check/acceptance
- remove -j from check stages
- use artifacts to save build stage
- add post acceptance template and use
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200701135652.1366-31-alex.bennee@linaro.org>
This fails on GitLab but not when run locally on the same container
image. It's very confusing.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200701135652.1366-30-alex.bennee@linaro.org>
For some reason these tests fail all the time on GitLab. I can
re-create the hang around 3% of the time locally but it doesn't seem
to be MTTCG related. For now skipIf on GITLAB_CI.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Cc: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com>
Message-Id: <20200701135652.1366-29-alex.bennee@linaro.org>
The old path doesn't exist but the rx-virt.dtb file has the same
checksum so lets use that.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200701135652.1366-28-alex.bennee@linaro.org>
Currently the test takes more the 900 seconds on GitLab and then times
out. Running on Travis seems to be OK.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200701135652.1366-27-alex.bennee@linaro.org>
We need additional python packages to run check-acceptance. Add them
to the docker images we will be using later.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20200701135652.1366-26-alex.bennee@linaro.org>
This allows us to point the tools towards a registry from which they
can grab pre-built layers instead of doing everything from scratch
each time. To enable this we need to be using the DOCKER_BUILDKIT
engine.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200701135652.1366-25-alex.bennee@linaro.org>
We've been misusing the tag naming scheme for some time by overloading
the post : section with the image type. Really it should be saved for
the revision of that particular build. Move the details to the other
side so we have:
qemu/image-name
with the implied :latest version added by the tooling.
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200701135652.1366-18-alex.bennee@linaro.org>
Reported-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200701135652.1366-17-alex.bennee@linaro.org>
We currently limit TCG guests to -smp 1 but now we have added some
aarch64 guests we can do better when running on x86_64 hardware.
Raise the limit for TCG guests when it is safe to do so.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Robert Foley <robert.foley@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200701135652.1366-16-alex.bennee@linaro.org>
optparse has been deprecated since version 3.2 and argparse is the
blessed replacement. Take the opportunity to enhance our help output
showing defaults when called.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Robert Foley <robert.foley@linaro.org>
Message-Id: <20200701135652.1366-15-alex.bennee@linaro.org>
This adds support to basevm.py so that we always
drain the console chars. This makes use of
support added in an earlier commit that allows
QEMUMachine to use the ConsoleSocket.
This is a workaround we found was needed since
there is a known issue where QEMU will hang waiting
for console characters to be consumed.
We also added the option of logging the console to a file.
LOG_CONSOLE=1 will now log the output to a file.
Signed-off-by: Robert Foley <robert.foley@linaro.org>
Reviewed-by: Peter Puhov <peter.puhov@linaro.org>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200601211421.1277-10-robert.foley@linaro.org>
Message-Id: <20200701135652.1366-14-alex.bennee@linaro.org>
This change converts existing scripts to using for example self.ROOT_PASS,
to self._config['root_pass'].
We made similar changes for GUEST_USER, and GUEST_PASS.
This allows us also to remove the change in basevm.py,
which adds __getattr__ for backwards compatibility.
Signed-off-by: Robert Foley <robert.foley@linaro.org>
Reviewed-by: Peter Puhov <peter.puhov@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200601211421.1277-8-robert.foley@linaro.org>
Message-Id: <20200701135652.1366-12-alex.bennee@linaro.org>
centos.aarch64 creates a CentOS 8 image.
Also added a new kickstart script used to build the centos.aarch64 image.
Signed-off-by: Robert Foley <robert.foley@linaro.org>
Reviewed-by: Peter Puhov <peter.puhov@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200601211421.1277-7-robert.foley@linaro.org>
Message-Id: <20200701135652.1366-11-alex.bennee@linaro.org>
ubuntu.aarch64 provides a script to create an Ubuntu 18.04 VM.
Another new file is also added aarch64vm.py, which is a module with
common methods used by aarch64 VMs, such as how to create the
flash images.
Signed-off-by: Robert Foley <robert.foley@linaro.org>
Reviewed-by: Peter Puhov <peter.puhov@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200601211421.1277-6-robert.foley@linaro.org>
Message-Id: <20200701135652.1366-10-alex.bennee@linaro.org>
Add a common Ubuntu python module and make use of
it with the ubuntu.i386 script.
This is preparation for adding an Ubuntu script
ubuntu.aarch64. Splitting out the common
logic such as build_image() will reduce duplication.
Signed-off-by: Robert Foley <robert.foley@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200601211421.1277-5-robert.foley@linaro.org>
Message-Id: <20200701135652.1366-9-alex.bennee@linaro.org>
Changes to tests/vm/basevm.py to allow accepting a configuration file
as a parameter. Allows for specifying VM options such as
cpu, machine, memory, and arbitrary qemu arguments for specifying options
such as NUMA configuration.
Also added an example conf_example_aarch64.yml and conf_example_x86.yml.
Signed-off-by: Robert Foley <robert.foley@linaro.org>
Reviewed-by: Peter Puhov <peter.puhov@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200601211421.1277-4-robert.foley@linaro.org>
Message-Id: <20200701135652.1366-8-alex.bennee@linaro.org>
Added use of a configuration to tests/vm/basevm.py.
The configuration provides parameters used to configure a VM.
This allows for providing alternate configurations to the VM being
created/launched. cpu, machine, memory, and NUMA configuration are all
examples of configuration which we might want to vary on the VM being created
or launched.
This will for example allow for creating an aarch64 vm.
Signed-off-by: Robert Foley <robert.foley@linaro.org>
Reviewed-by: Peter Puhov <peter.puhov@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200601211421.1277-3-robert.foley@linaro.org>
Message-Id: <20200701135652.1366-7-alex.bennee@linaro.org>
Adding the args parameter to BaseVM's __init__.
We will shortly need to pass more parameters to the class
so let's just pass args rather than growing the parameter list.
Signed-off-by: Robert Foley <robert.foley@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200601211421.1277-2-robert.foley@linaro.org>
Message-Id: <20200701135652.1366-6-alex.bennee@linaro.org>
- LUKS keyslot amendment
(+ patches to make the iotests pass on non-Linux systems, and to keep
the tests passing for qcow v1, and to skip LUKS tests (including
qcow2 LUKS) when the built qemu does not support it)
- Refactoring in the block layer: Drop the basically unnecessary
unallocated_blocks_are_zero field from BlockDriverInfo
- Fix qcow2 preallocation when the image size is not a multiple of the
cluster size
- Fix in block-copy code
-----BEGIN PGP SIGNATURE-----
iQFGBAABCAAwFiEEkb62CjDbPohX0Rgp9AfbAGHVz0AFAl8C9s0SHG1yZWl0ekBy
ZWRoYXQuY29tAAoJEPQH2wBh1c9AgMsH/A3fe7F6w1eaVQWoU/ABNwJahWzv5oNG
7s/rsYqHdr7GQldbfsZS8zrca2zY5jNRopfoTEmrCLFFUbHcXZNQzZObh2JZ892p
EfjHfHMqAC6e0ZnvKWgWPyRMGnsh7+H5U3EXiob9F4+YXC3SQRqzuwg0K9Tmk2uE
CpB/zBxI5BcYdEA/VD5uJxle6H49JdUXO64oDxTwMaJZuJKoiBGWX0iBhGeZEjcm
gPX5LuwVoc80HZquVqTGik3hwrlESYAwGN1GaicibHUR0f4CFrxFDxyEd3bZ8fGO
9+ScuO0vZmUDSal2tHjRsbKmcEdwtpI8JHn3tDdLljRoDOHrssMq2P4=
=v33H
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/maxreitz/tags/pull-block-2020-07-06' into staging
Block patches for 5.1:
- LUKS keyslot amendment
(+ patches to make the iotests pass on non-Linux systems, and to keep
the tests passing for qcow v1, and to skip LUKS tests (including
qcow2 LUKS) when the built qemu does not support it)
- Refactoring in the block layer: Drop the basically unnecessary
unallocated_blocks_are_zero field from BlockDriverInfo
- Fix qcow2 preallocation when the image size is not a multiple of the
cluster size
- Fix in block-copy code
# gpg: Signature made Mon 06 Jul 2020 11:02:53 BST
# gpg: using RSA key 91BEB60A30DB3E8857D11829F407DB0061D5CF40
# gpg: issuer "mreitz@redhat.com"
# gpg: Good signature from "Max Reitz <mreitz@redhat.com>" [full]
# Primary key fingerprint: 91BE B60A 30DB 3E88 57D1 1829 F407 DB00 61D5 CF40
* remotes/maxreitz/tags/pull-block-2020-07-06: (31 commits)
qed: Simplify backing reads
block: drop unallocated_blocks_are_zero
block/vhdx: drop unallocated_blocks_are_zero
block/file-posix: drop unallocated_blocks_are_zero
block/iscsi: drop unallocated_blocks_are_zero
block/crypto: drop unallocated_blocks_are_zero
block/vpc: return ZERO block-status when appropriate
block/vdi: return ZERO block-status when appropriate
block: inline bdrv_unallocated_blocks_are_zero()
qemu-img: convert: don't use unallocated_blocks_are_zero
iotests: add tests for blockdev-amend
block/qcow2: implement blockdev-amend
block/crypto: implement blockdev-amend
block/core: add generic infrastructure for x-blockdev-amend qmp command
iotests: qemu-img tests for luks key management
block/qcow2: extend qemu-img amend interface with crypto options
block/crypto: implement the encryption key management
block/crypto: rename two functions
block/amend: refactor qcow2 amend options
block/amend: separate amend and create options for qemu-img
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In case when get_image_offset() returns -1, we do zero out the
corresponding chunk of qiov. So, this should be reported as ZERO.
Note that this changes visible output of "qemu-img map --output=json"
and "qemu-io -c map" commands. For qemu-img map, the change is obvious:
we just mark as zero what is really zero. For qemu-io it's less
obvious: what was unallocated now is allocated.
There is an inconsistency in understanding of unallocated regions in
Qemu: backing-supporting format-drivers return 0 block-status to report
go-to-backing logic for this area. Some protocol-drivers (iscsi) return
0 to report fs-unallocated-non-zero status (i.e., don't occupy space on
disk, read result is undefined).
BDRV_BLOCK_ALLOCATED is defined as something more close to
go-to-backing logic. Still it is calculated as ZERO | DATA, so 0 from
iscsi is treated as unallocated. It doesn't influence backing-chain
behavior, as iscsi can't have backing file. But it does influence
"qemu-io -c map".
We should solve this inconsistency at some future point. Now, let's
just make backing-not-supporting format drivers (vdi in the previous
patch and vpc now) to behave more like backing-supporting drivers
and not report 0 block-status. More over, returning ZERO status is
absolutely valid thing, and again, corresponds to how the other
format-drivers (backing-supporting) work.
After block-status update, it never reports 0, so setting
unallocated_blocks_are_zero doesn't make sense (as the only user of it
is bdrv_co_block_status and it checks unallocated_blocks_are_zero only
for unallocated areas). Drop it.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200528094405.145708-5-vsementsov@virtuozzo.com>
[mreitz: qemu-io -c map as used by iotest 146 now reports everything as
allocated; in order to make the test do something useful, we
use qemu-img map --output=json now]
Signed-off-by: Max Reitz <mreitz@redhat.com>
We can use the image from the advent calendar 2018 to test the sun4u
machine. It's not using the "QEMU advent calendar" string, so we can
not use the do_test_advcal_2018() from boot_linux_console.py, thus
let's also put it into a separate file to also be able to add an
entry to the MAINTAINERS file.
Message-Id: <20200704173519.26087-1-thuth@redhat.com>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This commit adds two tests that cover the
new blockdev-amend functionality of luks and qcow2 driver
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
[mreitz: Let 295 verify that LUKS works; drop 295 and 296 from the auto
group]
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200625125548.870061-20-mreitz@redhat.com>
This commit adds two tests, which test the new amend interface
of both luks raw images and qcow2 luks encrypted images.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
[mreitz: Let 293 verify that LUKS works; drop $(seq) usage from 293;
drop 293 and 294 from the auto group]
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200625125548.870061-16-mreitz@redhat.com>
Now that we have all the infrastructure in place,
wire it in the qcow2 driver and expose this to the user.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200608094030.670121-9-mlevitsk@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Some qcow2 create options can't be used for amend.
Remove them from the qcow2 create options and add generic logic to detect
such options in qemu-img
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
[mreitz: Dropped some iotests reference output hunks that became
unnecessary thanks to
"iotests: Make _filter_img_create more active"]
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200625125548.870061-12-mreitz@redhat.com>
Whenever running an iotest for the luks format, we should check whether
luks actually really works.
Tests that try to create luks-encrypted qcow2 images should do the same.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200625125548.870061-7-mreitz@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Similar to _require_working_luks for bash tests, these functions can be
used to check whether our luks driver can actually create images.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200625125548.870061-6-mreitz@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
This function will be used by the next patch, which intends to check
both the exit code and qemu-img's output.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200625125548.870061-5-mreitz@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
[mreitz: Rebased on 49438972b8]
Signed-off-by: Max Reitz <mreitz@redhat.com>
That the luks driver is present is little indication on whether it is
actually working. Without the crypto libraries linked in, it does not
work. So add this function, which tries to create a luks image to see
whether that actually works.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200625125548.870061-4-mreitz@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
This allows more tests to be able to have same output on both qcow2 luks encrypted images
and raw luks images
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20200625125548.870061-3-mreitz@redhat.com>
Right now, _filter_img_create just filters out everything that looks
format-dependent, and applies some filename filters. That means that we
have to add another filter line every time some format gets a new
creation option. This can be avoided by instead discarding everything
and just keeping what we know is format-independent (format, size,
backing file, encryption information[1], preallocation) or just
interesting to have in the reference output (external data file path).
Furthermore, we probably want to sort these options. Format drivers are
not required to define them in any specific order, so the output is
effectively random (although this has never bothered us until now). We
need a specific order for our reference outputs, though. Unfortunately,
just using a plain "sort" would change a lot of existing reference
outputs, so we have to pre-filter the option keys to keep our existing
order (fmt, size, backing*, data, encryption info, preallocation).
Finally, this makes it difficult for _filter_img_create to automagically
work for QMP output. Thus, this patch adds a separate
_filter_img_create_for_qmp function that echos every line verbatim that
does not start with "Formatting", and pipes those "Formatting" lines to
_filter_img_create.
[1] Actually, the only thing that is really important is whether
encryption is enabled or not. A patch by Maxim thus removes all
other "encrypt.*" options from the output:
https://lists.nongnu.org/archive/html/qemu-block/2020-06/msg00339.html
But that patch needs to come later so we can get away with changing
as few reference outputs in this patch here as possible.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200625125548.870061-2-mreitz@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
When resizing an image with qcow2_co_truncate() using the falloc or
full preallocation modes the code assumes that both the old and new
sizes are cluster-aligned.
There are two problems with this:
1) The calculation of how many clusters are involved does not always
get the right result.
Example: creating a 60KB image and resizing it (with
preallocation=full) to 80KB won't allocate the second cluster.
2) No copy-on-write is performed, so in the previous example if
there is a backing file then the first 60KB of the first cluster
won't be filled with data from the backing file.
This patch fixes both issues.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-Id: <20200617140036.20311-1-berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
We have the same check in three places. Let's unify it in a central
place instead.
Message-Id: <20200622104339.21000-1-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
We used shm_open with mmap to share libfuzzer's coverage bitmap with
child (runner) processes. The same functionality can be achieved with
MAP_SHARED | MAP_ANONYMOUS, since we do not care about naming or
permissioning the shared memory object.
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20200622165040.15121-1-alxndr@bu.edu>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The qtest_enabled check introduced in d6919e4 always returns false, as
it is called prior to configure_accelerators(). Instead of trying to
skip rcu_disable_atfork in qemu_main, simply call rcu_enable_atfork in
the fuzzer, after qemu_main returns.
Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20200618160516.2817-1-alxndr@bu.edu>
Signed-off-by: Thomas Huth <thuth@redhat.com>
* i.MX6UL EVK board: put PHYs in the correct places
* hw/arm/virt: Let the virtio-iommu bypass MSIs
* target/arm: kvm: Handle DABT with no valid ISS
* hw/arm/virt-acpi-build: Only expose flash on older machine types
* target/arm: Fix temp double-free in sve ldr/str
* hw/display/bcm2835_fb.c: Initialize all fields of struct
* hw/arm/spitz: Code cleanup to fix Coverity-detected memory leak
* Deprecate TileGX port
-----BEGIN PGP SIGNATURE-----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=vdip
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20200703' into staging
target-arm queue:
* i.MX6UL EVK board: put PHYs in the correct places
* hw/arm/virt: Let the virtio-iommu bypass MSIs
* target/arm: kvm: Handle DABT with no valid ISS
* hw/arm/virt-acpi-build: Only expose flash on older machine types
* target/arm: Fix temp double-free in sve ldr/str
* hw/display/bcm2835_fb.c: Initialize all fields of struct
* hw/arm/spitz: Code cleanup to fix Coverity-detected memory leak
* Deprecate TileGX port
# gpg: Signature made Fri 03 Jul 2020 17:53:05 BST
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* remotes/pmaydell/tags/pull-target-arm-20200703: (34 commits)
Deprecate TileGX port
Replace uses of FROM_SSI_SLAVE() macro with QOM casts
hw/arm/spitz: Provide usual QOM macros for corgi-ssp and spitz-lcdtg
hw/arm/pxa2xx_pic: Use LOG_GUEST_ERROR for bad guest register accesses
hw/arm/spitz: Use LOG_GUEST_ERROR for bad guest register accesses
hw/gpio/zaurus.c: Use LOG_GUEST_ERROR for bad guest register accesses
hw/arm/spitz: Encapsulate misc GPIO handling in a device
hw/misc/max111x: Create header file for documentation, TYPE_ macros
hw/misc/max111x: Use GPIO lines rather than max111x_set_input()
hw/arm/spitz: Use max111x properties to set initial values
ssi: Add ssi_realize_and_unref()
hw/misc/max111x: Don't use vmstate_register()
hw/misc/max111x: provide QOM properties for setting initial values
hw/arm/spitz: Implement inbound GPIO lines for bit5 and power signals
hw/arm/spitz: Keep pointers to scp0, scp1 in SpitzMachineState
hw/arm/spitz: Keep pointers to MPU and SSI devices in SpitzMachineState
hw/arm/spitz: Create SpitzMachineClass abstract base class
hw/arm/spitz: Detabify
hw/display/bcm2835_fb.c: Initialize all fields of struct
target/arm: Fix temp double-free in sve ldr/str
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-id: 20200629140938.17566-3-drjones@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fixes: 93dd625f8b ("tests/acpi: update expected data files")
Signed-off-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-id: 20200629140938.17566-2-drjones@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Max Filippov