Commit Graph

3 Commits (d24e780427a08ea3b1b01e5058f1db37ec9a82ac)

Author SHA1 Message Date
Michael S. Tsirkin 8dcf525abc acpi-build: append description for non-hotplug
As reported in
http://article.gmane.org/gmane.comp.emulators.qemu/253987
Mac OSX actually requires describing all occupied slots
in ACPI - even if hotplug isn't enabled.

I didn't expect this so I dropped description of all
non hotpluggable slots from ACPI.
As a result: before
commit 99fd437dee (enable
hotplug for pci bridges), PCI cards show up in the "device tree" of OS X
(System Information). E.g., on MountainLion users have:

Hardware -> PCI Cards:

  Card          Type                 Driver Installed  Slot
 *ethernet      Ethernet Controller  Yes               PCI Slot 2
  pci8086,2934  USB UHC              Yes               PCI Slot 29

  ethernet:
    Type:                 Ethernet Controller
    Driver Installed:     Yes
    MSI:                  No
    Bus:                  PCI
    Slot                  PCI Slot 2
    Vendor ID:            0x8086
    Device ID:            0x100e
    Subsystem Vendor ID:  0x1af4
    Subsystem ID:         0x1100
    Revision ID:          0x0003

Hardware -> Ethernet Cards

  ethernet:
    Type:                 Ethernet Controller
    Bus:                  PCI
    Slot                  PCI Slot 2
    Vendor ID:            0x8086
    Device ID:            0x100e
    Subsystem Vendor ID:  0x1af4
    Subsystem ID:         0x1100
    Revision ID:          0x0003
    BSD name:             en0
    Kext name:            AppleIntel8254XEthernet.kext
    Location:             /System/Library/Extensions/...
    Version:              3.1.1b1

After commit 99fd437dee, users get:

Hardware -> PCI Cards:

  This computer doesn't contain any PCI cards. If you installed PCI
  cards, make sure they're properly installed.

Hardware -> Ethernet Cards

  ethernet:
    Type:                 Ethernet Controller
    Bus:                  PCI
    Vendor ID:            0x8086
    Device ID:            0x100e
    Subsystem Vendor ID:  0x1af4
    Subsystem ID:         0x1100
    Revision ID:          0x0003
    BSD name:             en0
    Kext name:            AppleIntel8254XEthernet.kext
    Location:             /System/Library/Extensions/...
    Version:              3.1.1b1

Ethernet still works, but it's not showing up on the PCI bus, and it
no longer thinks it's plugged in to slot #2, as it used to before the
change.

To fix, append description for all occupied non hotpluggable PCI slots.

One need to be careful when doing this: VGA devices
are now described in SSDT, so we need to drop description from DSDT.
And ISA devices are used in DSDT so drop them from SSDT.

Reported-by: Gabriel L. Somlo <gsomlo@gmail.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

Also update generated dsdt and pcihp hex dump files.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-03-09 21:09:30 +02:00
Michael S. Tsirkin 99fd437dee acpi-build: enable hotplug for PCI bridges
This enables support for device hotplug behind
pci bridges. Bridge devices themselves need
to be pre-configured on qemu command line.

Design:
    - at machine init time, assign "bsel" property to bridges with
      hotplug support
    - dynamically (At ACPI table read) generate ACPI code to handle
      hotplug events for each bridge with "bsel" property

Note: ACPI doesn't support adding or removing bridges by hotplug.
We detect and prevent removal of bridges by hotplug,
unless they were added by hotplug previously
(and so, are not described by ACPI).

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-01-26 13:11:44 +02:00
Michael S. Tsirkin 74523b8501 i386: add ACPI table files from seabios
This adds ASL code as well as scripts for processing it,
imported from seabios git tree
commit 51684b7ced75fb76776e8ee84833fcfb6ecf12dd

Will be used for runtime acpi table generation.

Note:
This patch reuses some code from SeaBIOS, which was originally under
LGPLv2 and then relicensed to GPLv3 or LGPLv3, in QEMU under GPLv2+. This
relicensing has been acked by all contributors that had contributed to the
code since the v2->v3 relicense. ACKs approving the v2+ relicensing are
listed below. The list might include ACKs from people not holding
copyright on any parts of the reused code, but it's better to err on the
side of caution and include them.

Affected SeaBIOS files (GPLv2+ license headers added)
<http://thread.gmane.org/gmane.comp.bios.coreboot.seabios/5949>:

 src/acpi-dsdt-cpu-hotplug.dsl
 src/acpi-dsdt-dbug.dsl
 src/acpi-dsdt-hpet.dsl
 src/acpi-dsdt-isa.dsl
 src/acpi-dsdt-pci-crs.dsl
 src/acpi.c
 src/acpi.h
 src/ssdt-misc.dsl
 src/ssdt-pcihp.dsl
 src/ssdt-proc.dsl
 tools/acpi_extract.py
 tools/acpi_extract_preprocess.py

Each one of the listed people agreed to the following:

> If you allow the use of your contribution in QEMU under the
> terms of GPLv2 or later as proposed by this patch,
> please respond to this mail including the line:
>
> Acked-by: Name <email address>

  Acked-by: Gerd Hoffmann <kraxel@redhat.com>
  Acked-by: Jan Kiszka <jan.kiszka@siemens.com>
  Acked-by: Jason Baron <jbaron@akamai.com>
  Acked-by: David Woodhouse <David.Woodhouse@intel.com>
  Acked-by: Gleb Natapov <gleb@redhat.com>
  Acked-by: Marcelo Tosatti <mtosatti@redhat.com>
  Acked-by: Dave Frodin <dave.frodin@se-eng.com>
  Acked-by: Paolo Bonzini <pbonzini@redhat.com>
  Acked-by: Kevin O'Connor <kevin@koconnor.net>
  Acked-by: Laszlo Ersek <lersek@redhat.com>
  Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
  Acked-by: Isaku Yamahata <yamahata@valinux.co.jp>
  Acked-by: Magnus Christensson <magnus.christensson@intel.com>
  Acked-by: Hu Tao <hutao@cn.fujitsu.com>
  Acked-by: Eduardo Habkost <ehabkost@redhat.com>

Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Hu Tao <hutao@cn.fujitsu.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Tested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-10-14 17:48:51 +03:00