The DEVICE() macro is defined as:
#define DEVICE(obj) OBJECT_CHECK(DeviceState, (obj), TYPE_DEVICE)
which expands to:
((DeviceState *)object_dynamic_cast_assert((Object *)(obj), (name),
__FILE__, __LINE__,
__func__))
This assertion can only fail when @obj points to something other
than its stated type, i.e. when we're in undefined behavior country.
Remove the unnecessary DEVICE() casts when we already know the
pointer is of DeviceState type.
Patch created mechanically using spatch with this script:
@@
typedef DeviceState;
DeviceState *s;
@@
- DEVICE(s)
+ s
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Paul Durrant <paul@xen.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Acked-by: John Snow <jsnow@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200512070020.22782-4-f4bug@amsat.org>
The OBJECT() macro is defined as:
#define OBJECT(obj) ((Object *)(obj))
Remove the unnecessary OBJECT() casts when we already know the
pointer is of Object type.
Patch created mechanically using spatch with this script:
@@
typedef Object;
Object *o;
@@
- OBJECT(o)
+ o
Acked-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Corey Minyard <cminyard@mvista.com>
Acked-by: John Snow <jsnow@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200512070020.22782-3-f4bug@amsat.org>
[Trivial rebase conflict in hw/s390x/sclp.c resolved]
Same story as for object_property_add(): the only way
object_property_del() can fail is when the property with this name
does not exist. Since our property names are all hardcoded, failure
is a programming error, and the appropriate way to handle it is
passing &error_abort. Most callers do that, the commit before
previous fixed one that didn't (and got the error handling wrong), and
the two remaining exceptions ignore errors.
Drop the @errp parameter.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200505152926.18877-19-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
chassis_from_bus() uses object_property_get_uint() to get property
"chassis_nr" of the bridge device. Failure would be a programming
error. Pass &error_abort, and simplify its callers.
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: qemu-ppc@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200505152926.18877-18-armbru@redhat.com>
Devices may have component devices and buses.
Device realization may fail. Realization is recursive: a device's
realize() method realizes its components, and device_set_realized()
realizes its buses (which should in turn realize the devices on that
bus, except bus_set_realized() doesn't implement that, yet).
When realization of a component or bus fails, we need to roll back:
unrealize everything we realized so far. If any of these unrealizes
failed, the device would be left in an inconsistent state. Must not
happen.
device_set_realized() lets it happen: it ignores errors in the roll
back code starting at label child_realize_fail.
Since realization is recursive, unrealization must be recursive, too.
But how could a partly failed unrealize be rolled back? We'd have to
re-realize, which can fail. This design is fundamentally broken.
device_set_realized() does not roll back at all. Instead, it keeps
unrealizing, ignoring further errors.
It can screw up even for a device with no buses: if the lone
dc->unrealize() fails, it still unregisters vmstate, and calls
listeners' unrealize() callback.
bus_set_realized() does not roll back either. Instead, it stops
unrealizing.
Fortunately, no unrealize method can fail, as we'll see below.
To fix the design error, drop parameter @errp from all the unrealize
methods.
Any unrealize method that uses @errp now needs an update. This leads
us to unrealize() methods that can fail. Merely passing it to another
unrealize method cannot cause failure, though. Here are the ones that
do other things with @errp:
* virtio_serial_device_unrealize()
Fails when qbus_set_hotplug_handler() fails, but still does all the
other work. On failure, the device would stay realized with its
resources completely gone. Oops. Can't happen, because
qbus_set_hotplug_handler() can't actually fail here. Pass
&error_abort to qbus_set_hotplug_handler() instead.
* hw/ppc/spapr_drc.c's unrealize()
Fails when object_property_del() fails, but all the other work is
already done. On failure, the device would stay realized with its
vmstate registration gone. Oops. Can't happen, because
object_property_del() can't actually fail here. Pass &error_abort
to object_property_del() instead.
* spapr_phb_unrealize()
Fails and bails out when remove_drcs() fails, but other work is
already done. On failure, the device would stay realized with some
of its resources gone. Oops. remove_drcs() fails only when
chassis_from_bus()'s object_property_get_uint() fails, and it can't
here. Pass &error_abort to remove_drcs() instead.
Therefore, no unrealize method can fail before this patch.
device_set_realized()'s recursive unrealization via bus uses
object_property_set_bool(). Can't drop @errp there, so pass
&error_abort.
We similarly unrealize with object_property_set_bool() elsewhere,
always ignoring errors. Pass &error_abort instead.
Several unrealize methods no longer handle errors from other unrealize
methods: virtio_9p_device_unrealize(),
virtio_input_device_unrealize(), scsi_qdev_unrealize(), ...
Much of the deleted error handling looks wrong anyway.
One unrealize methods no longer ignore such errors:
usb_ehci_pci_exit().
Several realize methods no longer ignore errors when rolling back:
v9fs_device_realize_common(), pci_qdev_unrealize(),
spapr_phb_realize(), usb_qdev_realize(), vfio_ccw_realize(),
virtio_device_realize().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200505152926.18877-17-armbru@redhat.com>
Several functions can't fail anymore: ich9_pm_add_properties(),
device_add_bootindex_property(), ppc_compat_add_property(),
spapr_caps_add_properties(), PropertyInfo.create(). Drop their @errp
parameter.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200505152926.18877-16-armbru@redhat.com>
The only way object_property_add() can fail is when a property with
the same name already exists. Since our property names are all
hardcoded, failure is a programming error, and the appropriate way to
handle it is passing &error_abort.
Same for its variants, except for object_property_add_child(), which
additionally fails when the child already has a parent. Parentage is
also under program control, so this is a programming error, too.
We have a bit over 500 callers. Almost half of them pass
&error_abort, slightly fewer ignore errors, one test case handles
errors, and the remaining few callers pass them to their own callers.
The previous few commits demonstrated once again that ignoring
programming errors is a bad idea.
Of the few ones that pass on errors, several violate the Error API.
The Error ** argument must be NULL, &error_abort, &error_fatal, or a
pointer to a variable containing NULL. Passing an argument of the
latter kind twice without clearing it in between is wrong: if the
first call sets an error, it no longer points to NULL for the second
call. ich9_pm_add_properties(), sparc32_ledma_realize(),
sparc32_dma_realize(), xilinx_axidma_realize(), xilinx_enet_realize()
are wrong that way.
When the one appropriate choice of argument is &error_abort, letting
users pick the argument is a bad idea.
Drop parameter @errp and assert the preconditions instead.
There's one exception to "duplicate property name is a programming
error": the way object_property_add() implements the magic (and
undocumented) "automatic arrayification". Don't drop @errp there.
Instead, rename object_property_add() to object_property_try_add(),
and add the obvious wrapper object_property_add().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200505152926.18877-15-armbru@redhat.com>
[Two semantic rebase conflicts resolved]
Both qdev_connect_gpio_out_named() and device_set_realized() put
objects without a parent into the "/machine/unattached/" orphanage.
qdev_connect_gpio_out_named() needs a lengthy comment to explain how
it works. It exploits that object_property_add_child() can fail only
when we got a parent already, and ignoring that error does what we
want. True. If it failed due to "duplicate property", we'd be in
trouble, but that would be a programming error.
device_set_realized() is cleaner: it checks whether we need a parent,
then calls object_property_add_child(), aborting on failure. No need
for a comment, and programming errors get caught.
Change qdev_connect_gpio_out_named() to match.
Cc: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200505152926.18877-14-armbru@redhat.com>
The "bcm2835-peripherals" device's .instance_init() method
bcm2835_peripherals_init() attempts to make two memory regions QOM
children of the device. This is futile, because memory_region_init()
already did. The errors are ignored (a later commit will change
that). Drop the useless calls.
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Andrew Baumann <Andrew.Baumann@microsoft.com>
Cc: "Philippe Mathieu-Daudé" <philmd@redhat.com>
Cc: qemu-arm@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200505152926.18877-13-armbru@redhat.com>
QOM object initialization runs .instance_init() for the type and all
its supertypes; see object_init_with_type().
Both TYPE_E1000_BASE and its concrete subtypes set .instance_init() to
e1000_instance_init(). For the concrete subtypes, it duly gets run
twice. The second run fails, but the error gets ignored (a later
commit will change that).
Remove it from the subtypes.
Cc: Jason Wang <jasowang@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200505152926.18877-12-armbru@redhat.com>
isa_superio_realize() attempts to make isa-parallel and isa-serial QOM
children, but this does not work, because it calls
object_property_add_child() after realizing with qdev_init_nofail().
Realizing a device without a parent gives it one: it gets put into the
"/machine/unattached/" orphanage. The extra
object_property_add_child() fails, and isa_superio_realize() ignores
the error.
Move the object_property_add_child() before qdev_init_nofail(), and
pass &error_abort.
For the other components, isa_superio_realize() doesn't even try. Add
object_property_add_child() there.
This affects machines 40p, clipper and fulong2e.
For instance, fulong2e has its vt82c686b-superio (which is an
isa-superio) at /machine/unattached/device[9]. Before the patch, its
components are at /machine/unattached/device[10] .. [14]. Afterwards,
they are at
/machine/unattached/device[9]/{parallel0,serial0,serial1,isa-fdc,i8042}.
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200505152926.18877-11-armbru@redhat.com>
object_property_set_description() and
object_class_property_set_description() fail only when property @name
is not found.
There are 85 calls of object_property_set_description() and
object_class_property_set_description(). None of them can fail:
* 84 immediately follow the creation of the property.
* The one in spapr_rng_instance_init() refers to a property created in
spapr_rng_class_init(), from spapr_rng_properties[].
Every one of them still gets to decide what to pass for @errp.
51 calls pass &error_abort, 32 calls pass NULL, one receives the error
and propagates it to &error_abort, and one propagates it to
&error_fatal. I'm actually surprised none of them violates the Error
API.
What are we gaining by letting callers handle the "property not found"
error? Use when the property is not known to exist is simpler: you
don't have to guard the call with a check. We haven't found such a
use in 5+ years. Until we do, let's make life a bit simpler and drop
the @errp parameter.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200505152926.18877-8-armbru@redhat.com>
[One semantic rebase conflict resolved]
qom/object.c provides object_property_get_TYPE() and
object_property_set_TYPE() for a number of common types. These are
all convenience wrappers around object_property_get_qobject() and
object_property_set_qobject().
Except for object_property_get_uint16List(), which is unusual in two ways:
* It bypasses object_property_get_qobject(). Fixable; the previous
commit did it for object_property_get_enum())
* It stores the value through a parameter. Its contract claims it
returns the value, like the other functions do. Also fixable.
Fixing is not worthwhile, though: object_property_get_uint16List() has
seen exactly one user in six years.
Convert the lone user to do its job with the generic
object_property_get_qobject(), and drop object_property_get_uint16List().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200505152926.18877-6-armbru@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
[Commit message typo fixed]
Uses of gchar * in qom/object.h:
* ObjectProperty member @name
Functions that take a property name argument all use char *. Change
the member to match.
* ObjectProperty member @type
Functions that take a property type argument or return it all use
char *. Change the member to match.
* ObjectProperty member @description
Functions that take a property description argument all use char *.
Change the member to match.
* object_resolve_path_component() parameter @part
Path components are property names. Most callers pass char *
arguments. Change the parameter to match. Adjust the few callers
that pass gchar * to pass char *.
* Return value of object_get_canonical_path_component(),
object_get_canonical_path()
Most callers convert their return values right back to char *.
Change the return value to match. Adjust the few callers where that
would add a conversion to gchar * to use char * instead.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200505152926.18877-3-armbru@redhat.com>
kvm_arch_on_sigbus_vcpu() error injection uses source_id as
index in etc/hardware_errors to find out Error Status Data
Block entry corresponding to error source. So supported source_id
values should be assigned here and not be changed afterwards to
make sure that guest will write error into expected Error Status
Data Block.
Before QEMU writes a new error to ACPI table, it will check whether
previous error has been acknowledged. If not acknowledged, the new
errors will be ignored and not be recorded. For the errors section
type, QEMU simulate it to memory section error.
Signed-off-by: Dongjiu Geng <gengdongjiu@huawei.com>
Signed-off-by: Xiang Zheng <zhengxiang9@huawei.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 20200512030609.19593-9-gengdongjiu@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Record the GHEB address via fw_cfg file, when recording
a error to CPER, it will use this address to find out
Generic Error Data Entries and write the error.
In order to avoid migration failure, make hardware
error table address to a part of GED device instead
of global variable, then this address will be migrated
to target QEMU.
Acked-by: Xiang Zheng <zhengxiang9@huawei.com>
Signed-off-by: Dongjiu Geng <gengdongjiu@huawei.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 20200512030609.19593-7-gengdongjiu@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch builds Hardware Error Source Table(HEST) via fw_cfg blobs.
Now it only supports ARMv8 SEA, a type of Generic Hardware Error
Source version 2(GHESv2) error source. Afterwards, we can extend
the supported types if needed. For the CPER section, currently it
is memory section because kernel mainly wants userspace to handle
the memory errors.
This patch follows the spec ACPI 6.2 to build the Hardware Error
Source table. For more detailed information, please refer to
document: docs/specs/acpi_hest_ghes.rst
build_ghes_hw_error_notification() helper will help to add Hardware
Error Notification to ACPI tables without using packed C structures
and avoid endianness issues as API doesn't need explicit conversion.
Signed-off-by: Xiang Zheng <zhengxiang9@huawei.com>
Signed-off-by: Dongjiu Geng <gengdongjiu@huawei.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 20200512030609.19593-6-gengdongjiu@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch builds error_block_address and read_ack_register fields
in hardware errors table , the error_block_address points to Generic
Error Status Block(GESB) via bios_linker. The max size for one GESB
is 1kb, For more detailed information, please refer to
document: docs/specs/acpi_hest_ghes.rst
Now we only support one Error source, if necessary, we can extend to
support more.
Suggested-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Xiang Zheng <zhengxiang9@huawei.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Dongjiu Geng <gengdongjiu@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 20200512030609.19593-5-gengdongjiu@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
RAS Virtualization feature is not supported now, so
add a RAS machine option and disable it by default.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Dongjiu Geng <gengdongjiu@huawei.com>
Signed-off-by: Xiang Zheng <zhengxiang9@huawei.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-id: 20200512030609.19593-3-gengdongjiu@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The little end UUID is used in many places, so make
NVDIMM_UUID_LE to a common macro to convert the UUID
to a little end array.
Reviewed-by: Xiang Zheng <zhengxiang9@huawei.com>
Signed-off-by: Dongjiu Geng <gengdongjiu@huawei.com>
Message-id: 20200512030609.19593-2-gengdongjiu@huawei.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Sonora Pass is a 2 socket x86 motherboard designed by Facebook
and supported by OpenBMC. Strapping configuration was obtained
from hardware and i2c configuration is based on dts found at:
1633c87b8b/arch/arm/boot/dts/aspeed-bmc-facebook-sonorapass.dts
Booted a test image of http://github.com/facebook/openbmc to login
prompt.
Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
Reviewed-by: Amithash Prasad <amithash@fb.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
[PMM: fixed block comment style nit]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add support for stream fragments.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-Id: <20200506082513.18751-9-edgar.iglesias@gmail.com>
Stream descriptor by descriptor from memory instead of
buffering entire packets before pushing. This enables
non-packet streaming clients to work and also lifts the
limitation that our internal DMA buffer needs to be able
to hold entire packets.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-Id: <20200506082513.18751-8-edgar.iglesias@gmail.com>
Add support for fragmented packets from the DMA.
Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-Id: <20200506082513.18751-7-edgar.iglesias@gmail.com>
Some stream clients stream an endless stream of data while
other clients stream data in packets. Stream interfaces
usually have a way to signal the end of a packet or the
last beat of a transfer.
This adds an end-of-packet flag to the push interface.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-Id: <20200506082513.18751-6-edgar.iglesias@gmail.com>
Add DMA memory-region property to externally control what
address-space this DMA operates on.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200506082513.18751-5-edgar.iglesias@gmail.com>
Remove unncessary cast, buf is already uint8_t *.
No functional change.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200506082513.18751-4-edgar.iglesias@gmail.com>
Split the shared stream_class_init function to assign
stream->push with better type-safety.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200506082513.18751-3-edgar.iglesias@gmail.com>
Auto-clear PHY CR Autoneg bits. This makes this model
work with recent Linux kernels.
Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-Id: <20200506082513.18751-2-edgar.iglesias@gmail.com>
If delivery of some 9pfs response fails for some reason, log the
error message by mentioning the 9P protocol reply type, not by
client's request type. The latter could be misleading that the
error occurred already when handling the request input.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
Message-Id: <ad0e5a9b6abde52502aa40b30661d29aebe1590a.1589132512.git.qemu_oss@crudebyte.com>
Signed-off-by: Greg Kurz <groug@kaod.org>
QEMU's local 9pfs server passes through O_NOATIME from the client. If
the QEMU process doesn't have permissions to use O_NOATIME (namely, it
does not own the file nor have the CAP_FOWNER capability), the open will
fail. This causes issues when from the client's point of view, it
believes it has permissions to use O_NOATIME (e.g., a process running as
root in the virtual machine). Additionally, overlayfs on Linux opens
files on the lower layer using O_NOATIME, so in this case a 9pfs mount
can't be used as a lower layer for overlayfs (cf.
dabfe19719/vmtest/onoatimehack.c
and https://github.com/NixOS/nixpkgs/issues/54509).
Luckily, O_NOATIME is effectively a hint, and is often ignored by, e.g.,
network filesystems. open(2) notes that O_NOATIME "may not be effective
on all filesystems. One example is NFS, where the server maintains the
access time." This means that we can honor it when possible but fall
back to ignoring it.
Acked-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Message-Id: <e9bee604e8df528584693a4ec474ded6295ce8ad.1587149256.git.osandov@fb.com>
Signed-off-by: Greg Kurz <groug@kaod.org>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEuBi5yt+QicLVzsZrda1lgCoLQhEFAl66xcoACgkQda1lgCoL
QhEnvAgAjF9PL/ErC9wBdnvOjukTwI6M82+RLnU/Vy4zeM/Jv1ehuukYSnfj2Uck
CSwIfqxyC4DfPZpg/wZMiFLXLMtBq0itbFTjpjd4XGDcL6MJBcUShK/pZDNqTKeE
E1laSks5v2vHjHU6YVbwZV07ump5jiLMvFgvjR0FVUiq3u79Zj/FSe2Os3kVOeUV
v+E9bHG1PdB3RRrC3Q+DSxkdYK5Nw/2ZJBG7R5PIWLweb7tkWy7n1SFDq9p7Xleh
oyMblVl/+rmj6iWcts1i/R0AZ04qTqQEXXWSgtzzEIWaeSwGDpzRIit7xm6/cU4U
2EHzOyhYC2mUa8Hd+o5uSt5zyrnVqw==
=pXKy
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stefanberger/tags/pull-tpm-2020-05-08-1' into staging
Merge tpm 2020/05/08 v3
# gpg: Signature made Tue 12 May 2020 16:50:34 BST
# gpg: using RSA key B818B9CADF9089C2D5CEC66B75AD65802A0B4211
# gpg: Good signature from "Stefan Berger <stefanb@linux.vnet.ibm.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: B818 B9CA DF90 89C2 D5CE C66B 75AD 6580 2A0B 4211
* remotes/stefanberger/tags/pull-tpm-2020-05-08-1:
hw/tpm: fix usage of bool in tpm-tis.c
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Clean up wrong usage of FALSE and TRUE in places that use "bool" from stdbool.h.
FALSE and TRUE (with capital letters) are the constants defined by glib for
being used with the "gboolean" type of glib. But some parts of the code also use
TRUE and FALSE for variables that are declared as "bool" (the type from <stdbool.h>).
Signed-off-by: Jafar Abdi <cafer.abdi@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
I can't find proper documentation or datasheet, but it is likely
a MMIO mapped serial device mapped in the 0x80000000..0x8000ffff
range belongs to the SoC address space, thus is always mapped in
the memory bus.
Map the devices on the bus regardless a chardev is attached to it.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Jan Kiszka <jan.kiszka@web.de>
Message-id: 20200505095945.23146-1-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add trace event to display timer's counter value updates.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200504072822.18799-5-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The NRF51 series SoC have 3 timer peripherals, each having
4 counters. To help differentiate which peripheral is accessed,
display the timer ID in the trace events.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200504072822.18799-4-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
On the NRF51 series, all peripherals have a fixed I/O size
of 4KiB. Define NRF51_PERIPHERAL_SIZE and use it.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200504072822.18799-2-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The AST2600 handles this differently with the extra 'hardlock' state, so
move the testing to the soc specific class' write callback.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-id: 20200505090136.341426-1-joel@jms.id.au
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
There are minimal differences from Qemu's point of view between the A0
and A1 silicon revisions.
As the A1 exercises different code paths in u-boot it is desirable to
emulate that instead.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-id: 20200504093703.261135-1-joel@jms.id.au
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is a boot stub that is similar to the code u-boot runs, allowing
the kernel to boot the secondary CPU.
u-boot works as follows:
1. Initialises the SMP mailbox area in the SCU at 0x1e6e2180 with default values
2. Copies a stub named 'mailbox_insn' from flash to the SCU, just above the
mailbox area
3. Sets AST_SMP_MBOX_FIELD_READY to a magic value to indicate the
secondary can begin execution from the stub
4. The stub waits until the AST_SMP_MBOX_FIELD_GOSIGN register is set to
a magic value
5. Jumps to the address in AST_SMP_MBOX_FIELD_ENTRY, starting Linux
Linux indicates it is ready by writing the address of its entrypoint
function to AST_SMP_MBOX_FIELD_ENTRY and the 'go' magic number to
AST_SMP_MBOX_FIELD_GOSIGN. The secondary CPU sees this at step 4 and
breaks out of it's loop.
To be compatible, a fixed qemu stub is loaded into the mailbox area. As
qemu can ensure the stub is loaded before execution starts, we do not
need to emulate the AST_SMP_MBOX_FIELD_READY behaviour of u-boot. The
secondary CPU's program counter points to the beginning of the stub,
allowing qemu to start secondaries at step four.
Reboot behaviour is preserved by resetting AST_SMP_MBOX_FIELD_GOSIGN
when the secondaries are reset.
This is only configured when the system is booted with -kernel and qemu
does not execute u-boot first.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
First pull request for qemu-5.1. This includes:
* Removal of all remaining cases where we had CAS triggered reboots
* A number of improvements to NMI injection
* Support for partition scoped radix translation in softmmu
* Some fixes for NVDIMM handling
* A handful of other minor fixes
-----BEGIN PGP SIGNATURE-----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=INvG
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-5.1-20200507' into staging
ppc patch queue for 2020-04-07
First pull request for qemu-5.1. This includes:
* Removal of all remaining cases where we had CAS triggered reboots
* A number of improvements to NMI injection
* Support for partition scoped radix translation in softmmu
* Some fixes for NVDIMM handling
* A handful of other minor fixes
# gpg: Signature made Thu 07 May 2020 06:00:55 BST
# gpg: using RSA key 75F46586AE61A66CC44E87DC6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" [full]
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" [full]
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" [full]
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>" [unknown]
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-5.1-20200507:
target-ppc: fix rlwimi, rlwinm, rlwnm for Clang-9
spapr_nvdimm: Tweak error messages
spapr_nvdimm.c: make 'label-size' mandatory
target/ppc: Add support for Radix partition-scoped translation
target/ppc: Rework ppc_radix64_walk_tree() for partition-scoped translation
target/ppc: Extend ppc_radix64_check_prot() with a 'partition_scoped' bool
target/ppc: Introduce ppc_radix64_xlate() for Radix tree translation
spapr: Don't allow unplug of NVLink2 devices
target/ppc: Assert if HV mode is set when running under a pseries machine
target/ppc: Introduce a relocation bool in ppc_radix64_handle_mmu_fault()
target/ppc: Enforce that the root page directory size must be at least 5
spapr: Drop CAS reboot flag
spapr/cas: Separate CAS handling from rebuilding the FDT
spapr: Simplify selection of radix/hash during CAS
ppc/pnv: Add support for NMI interface
ppc/spapr: tweak change system reset helper
spapr: Don't check capabilities removed between CAS calls
target/ppc: Improve syscall exception logging
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The restrictions here (which are checked at pre-plug time) are PAPR
specific, rather than being inherent to the NVDIMM devices. Adjust the
error messages to be clearer about this.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The pseries machine does not support NVDIMM modules without label.
Attempting to do so, even if the overall block size is aligned with
256MB, will seg fault the guest kernel during NVDIMM probe. This
can be avoided by forcing 'label-size' to always be present for
sPAPR NVDIMMs.
The verification was put before the alignment check because the
presence of label-size affects the alignment calculation, so
it's not optimal to warn the user about an alignment error,
then about the lack of label-size, then about a new alignment
error when the user sets a label-size.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20200413203628.31636-1-danielhb413@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Currently, we can't properly handle unplug of NVLink2 devices, because we
don't have code to tear down their special memory resources. There's not
a lot of impetus to implement that: since hardware NVLink2 devices can't
be hot unplugged, the guest side drivers don't usually support unplug
anyway.
Therefore, simply prevent unplug of NVLink2 devices.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
The CAS reboot flag is false by default and all the locations that
could set it to true have been dropped. This means that all code
blocks depending on the flag being set is dead code and the other
code blocks should be executed always.
Just do that and drop the now uneeded CAS reboot flag. Fix a
comment on the way to make checkpatch happy.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <158514994893.478799.11772512888322840990.stgit@bahia.lan>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
At the moment "ibm,client-architecture-support" ("CAS") is implemented
in SLOF and QEMU assists via the custom H_CAS hypercall which copies
an updated flatten device tree (FDT) blob to the SLOF memory which
it then uses to update its internal tree.
When we enable the OpenFirmware client interface in QEMU, we won't need
to copy the FDT to the guest as the client is expected to fetch
the device tree using the client interface.
This moves FDT rebuild out to a separate helper which is going to be
called from the "ibm,client-architecture-support" handler and leaves
writing FDT to the guest in the H_CAS handler.
This should not cause any behavioral change.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Message-Id: <20200310050733.29805-3-aik@ozlabs.ru>
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <158514994229.478799.2178881312094922324.stgit@bahia.lan>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The guest can select the MMU mode by setting bits 0-1 of byte 24
in OV5 to to 0b00 for hash or 0b01 for radix. As required by the
architecture, we terminate the boot process if any other value
is found there.
The usual way to negotiate features in OV5 is basically ANDing
the bitfield provided by the guest and the bitfield of features
supported by QEMU, previously populated at machine init.
For some not documented reason, MMU is treated differently : bit 1
of byte 24 (the radix/hash bit) is cleared from the guest OV5 and
explicitely set in the final negotiated OV5 if radix was requested.
Since the only expected input from the guest is the radix/hash bit
being set or not, it seems more appropriate to handle this like we
do for XIVE.
Set the radix bit in spapr->ov5 at machine init if it has a chance
to work (ie. power9, either TCG or a radix capable KVM) and rely
exclusively on spapr_ovec_intersect() to set the radix bit in
spapr->ov5_cas.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <158514993621.478799.4204740354545734293.stgit@bahia.lan>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This implements the NMI interface for the PNV machine, similarly to
commit 3431648272 ("spapr: Add support for new NMI interface") for
SPAPR.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Message-Id: <20200325144147.221875-3-npiggin@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Rather than have the helper take an optional vector address
override, instead have its caller modify env->nip itself.
This is more consistent when adding pnv nmi support, and also
with mce injection added later.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Message-Id: <20200325144147.221875-2-npiggin@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Philippe Mathieu-Daudé