These devices go with the "via-pmu" device, which is controlled by
property "has-pmu". macio_newworld_init() creates it unconditionally,
because the property has not been set then. macio_newworld_realize()
realizes it only when the property is true. Works, although it can
leave an unrealized device hanging around in the QOM composition tree.
Affects machine mac99 with via=cuda (default).
Delete the unused device by making macio_newworld_realize() unparent
it. Visible in "info qom-tree":
/machine (mac99-machine)
[...]
/unattached (container)
/device[9] (macio-newworld)
[...]
/escc-legacy-port[8] (qemu:memory-region)
/escc-legacy-port[9] (qemu:memory-region)
/escc-legacy[0] (qemu:memory-region)
- /gpio (macio-gpio)
- /gpio[0] (qemu:memory-region)
/ide[0] (macio-ide)
/ide.0 (IDE)
/pmac-ide[0] (qemu:memory-region)
Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: qemu-ppc@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20200609122339.937862-11-armbru@redhat.com>
cuda_init() creates a "mos6522-cuda" device, but it's never realized.
Affects machines mac99 with via=cuda (default) and g3beige.
pmu_init() creates a "mos6522-pmu" device, but it's never realized.
Affects machine mac99 with via=pmu and via=pmu-adb,
In theory, a device becomes real only on realize. In practice, the
transition from unreal to real is a fuzzy one. The work to make a
device real can be spread between realize methods (fine),
instance_init methods (wrong), and board code wiring up the device
(fine as long as it effectively happens on realize). Depending on
what exactly is done where, a device can work even when we neglect
to realize it.
These two appear to work. Nevertheless, it's a clear misuse of the
interface. Even when it works today (more or less by chance), it can
break tomorrow.
Fix by realizing them in cuda_realize() and pmu_realize(),
respectively.
Fixes: 6dca62a000
Cc: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200609122339.937862-10-armbru@redhat.com>
mac_via_realize() creates a "mos6522-q800-via1" and a
"mos6522-q800-via2" device, but neglects to realize them. Affects
machine q800.
In theory, a device becomes real only on realize. In practice, the
transition from unreal to real is a fuzzy one. The work to make a
device real can be spread between realize methods (fine),
instance_init methods (wrong), and board code wiring up the device
(fine as long as it effectively happens on realize). Depending on
what exactly is done where, a device can work even when we neglect
to realize it.
These two appear to work. Nevertheless, it's a clear misuse of the
interface. Even when it works today (more or less by chance), it can
break tomorrow.
Fix by realizing them right away.
Fixes: 6dca62a000
Cc: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20200609122339.937862-9-armbru@redhat.com>
Tested-by: Laurent Vivier <laurent@vivier.eu>
Acked-by: Laurent Vivier <laurent@vivier.eu>
We plug aux-to-i2c-bridge into the aux-bus, even though its
DeviceClass member bus_type is null, not TYPE_AUX_BUS. Fix that by
deriving it from TYPE_AUX_SLAVE instead of TYPE_DEVICE.
Cc: KONRAD Frederic <fred.konrad@greensocs.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200609122339.937862-8-armbru@redhat.com>
These devices are optional, and enabled by property "enable-bitband".
armv7m_instance_init() creates them unconditionally, because the
property has not been set then. armv7m_realize() realizes them only
when the property is true. Works, although it leaves unrealized
devices hanging around in the QOM composition tree. Affects machines
microbit, mps2-an505, mps2-an521, musca-a, and musca-b1.
Delete the unused devices by making armv7m_realize() unparent them.
Visible in "info qom-tree"; here's the change for microbit:
/machine (microbit-machine)
/microbit.twi (microbit.i2c)
/microbit.twi[0] (qemu:memory-region)
/nrf51 (nrf51-soc)
/armv6m (armv7m)
/armv7m-container[0] (qemu:memory-region)
- /bitband[0] (ARM,bitband-memory)
- /bitband[0] (qemu:memory-region)
- /bitband[1] (ARM,bitband-memory)
- /bitband[0] (qemu:memory-region)
/cpu (cortex-m0-arm-cpu)
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: qemu-arm@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20200609122339.937862-7-armbru@redhat.com>
The number of MACs supported by an Aspeed SoC is defined by "macs_num"
under the SoC model, that is two for the AST2400 and AST2500 and four
for the AST2600. The model initializes the maximum number of supported
MACs but the number of realized devices is capped by the number of
network device back-ends defined on the command line. This can leave
unrealized devices hanging around in the QOM composition tree.
To get virtual hardware that matches the physical hardware, you have
to pass exactly as many -nic options as there are MACs, and some of
them must be -nic none:
* Machines ast2500-evb, palmetto-bmc, romulus-bmc, sonorapass-bmc,
swift-bmc, and witherspoon-bmc: two -nic, and the second one must be
-nic none.
* Machine ast2600-evb: four -nic, the first one must be -nic none.
* Machine tacoma-bmc: four nic, the first two and the last one must be
-nic none.
Modify the machine initialization to define which MACs are attached to
a network device back-end using a bit-field property "macs-mask" and
let the SoC realize all network devices.
The default setting of "macs-mask" is "use MAC0" only, which works for
all our AST2400 and AST2500 machines. The AST2600 machines have
different configurations. The AST2600 EVB machine activates MAC1, MAC2
and MAC3 and the Tacoma BMC machine activates MAC2.
Incompatible CLI change: -nic options now apply to *active* MACs:
MAC1, MAC2, MAC3 for ast2600-evb, MAC2 for tacoma-bmc, and MAC0 for
all the others.
The machines now always get all MACs as they should. Visible in "info
qom-tree", here's the change for tacoma-bmc:
/machine (tacoma-bmc-machine)
/peripheral (container)
/peripheral-anon (container)
/soc (ast2600-a1)
[...]
/ftgmac100[0] (ftgmac100)
/ftgmac100[0] (qemu:memory-region)
/ftgmac100[1] (ftgmac100)
+ /ftgmac100[0] (qemu:memory-region)
/ftgmac100[2] (ftgmac100)
+ /ftgmac100[0] (qemu:memory-region)
/ftgmac100[3] (ftgmac100)
+ /ftgmac100[0] (qemu:memory-region)
[...]
/mii[0] (aspeed-mmi)
/aspeed-mmi[0] (qemu:memory-region)
/mii[1] (aspeed-mmi)
+ /aspeed-mmi[0] (qemu:memory-region)
/mii[2] (aspeed-mmi)
+ /aspeed-mmi[0] (qemu:memory-region)
/mii[3] (aspeed-mmi)
+ /aspeed-mmi[0] (qemu:memory-region)
Also visible in "info qtree"; here's the change for tacoma-bmc:
dev: ftgmac100, id ""
gpio-out "sysbus-irq" 1
aspeed = true
- mac = "52:54:00:12:34:56"
- netdev = "hub0port0"
+ mac = "52:54:00:12:34:57"
+ netdev = ""
mmio 000000001e660000/0000000000002000
dev: ftgmac100, id ""
- aspeed = false
- mac = "00:00:00:00:00:00"
+ gpio-out "sysbus-irq" 1
+ aspeed = true
+ mac = "52:54:00:12:34:58"
netdev = ""
+ mmio 000000001e680000/0000000000002000
dev: ftgmac100, id ""
- aspeed = false
- mac = "00:00:00:00:00:00"
- netdev = ""
+ gpio-out "sysbus-irq" 1
+ aspeed = true
+ mac = "52:54:00:12:34:56"
+ netdev = "hub0port0"
+ mmio 000000001e670000/0000000000002000
dev: ftgmac100, id ""
- aspeed = false
- mac = "00:00:00:00:00:00"
+ gpio-out "sysbus-irq" 1
+ aspeed = true
+ mac = "52:54:00:12:34:59"
netdev = ""
+ mmio 000000001e690000/0000000000002000
[...]
dev: aspeed-mmi, id ""
mmio 000000001e650000/0000000000000008
dev: aspeed-mmi, id ""
+ mmio 000000001e650008/0000000000000008
dev: aspeed-mmi, id ""
+ mmio 000000001e650010/0000000000000008
dev: aspeed-mmi, id ""
+ mmio 000000001e650018/0000000000000008
Inactive MACs will have no peer and QEMU may warn the user with :
qemu-system-arm: warning: nic ftgmac100.0 has no peer
qemu-system-arm: warning: nic ftgmac100.1 has no peer
qemu-system-arm: warning: nic ftgmac100.3 has no peer
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
[Commit message expanded]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200609122339.937862-6-armbru@redhat.com>
Commit ece09beec4 ("aspeed: introduce a configurable number of CPU
per machine") was a convient change during bringup but the Aspeed SoCs
have a fixed number of CPUs : one for the AST2400 and AST2500, and two
for the AST2600.
When the number of CPUs configured with -smp is less than the SoC's
fixed number, the "unconfigured" CPUs are left unrealized. This can
happen for machines ast2600-evb and tacoma-bmc, where the SoC's fixed
number is 2. To get virtual hardware that matches the physical
hardware, you have to pass -smp cpus=2 (or its sugared form -smp 2).
We normally reject -smp cpus=N when N exceeds the machine's limit.
Except we ignore cpus=2 (and only cpus=2) with a warning for machines
ast2500-evb, palmetto-bmc, romulus-bmc, sonorapass-bmc, swift-bmc, and
witherspoon-bmc.
Remove the "num-cpu" property from the SoC state and use the fixed
number of CPUs defined in the SoC class instead. Compute the default,
min, max number of CPUs of the machine directly from the SoC class
definition.
Machines ast2600-evb and tacoma-bmc now always get their second CPU as
they should. Visible in "info qom-tree"; here's the change for
ast2600-evb:
/machine (ast2600-evb-machine)
/peripheral (container)
/peripheral-anon (container)
/soc (ast2600-a1)
/a7mpcore (a15mpcore_priv)
/a15mp-priv-container[0] (qemu:memory-region)
/gic (arm_gic)
/gic_cpu[0] (qemu:memory-region)
/gic_cpu[1] (qemu:memory-region)
+ /gic_cpu[2] (qemu:memory-region)
/gic_dist[0] (qemu:memory-region)
/gic_vcpu[0] (qemu:memory-region)
/gic_viface[0] (qemu:memory-region)
/gic_viface[1] (qemu:memory-region)
+ /gic_viface[2] (qemu:memory-region)
/unnamed-gpio-in[0] (irq)
[...]
+ /unnamed-gpio-in[160] (irq)
[same for 161 to 190...]
+ /unnamed-gpio-in[191] (irq)
Also visible in "info qtree"; here's the change for ast2600-evb:
bus: main-system-bus
type System
dev: a15mpcore_priv, id ""
gpio-in "" 128
- gpio-out "sysbus-irq" 5
- num-cpu = 1 (0x1)
+ gpio-out "sysbus-irq" 10
+ num-cpu = 2 (0x2)
num-irq = 160 (0xa0)
mmio 0000000040460000/0000000000008000
dev: arm_gic, id ""
- gpio-in "" 160
- num-cpu = 1 (0x1)
+ gpio-in "" 192
+ num-cpu = 2 (0x2)
num-irq = 160 (0xa0)
revision = 2 (0x2)
has-security-extensions = true
has-virtualization-extensions = true
num-priority-bits = 8 (0x8)
mmio ffffffffffffffff/0000000000001000
mmio ffffffffffffffff/0000000000002000
mmio ffffffffffffffff/0000000000001000
mmio ffffffffffffffff/0000000000002000
mmio ffffffffffffffff/0000000000000100
+ mmio ffffffffffffffff/0000000000000100
+ mmio ffffffffffffffff/0000000000000200
mmio ffffffffffffffff/0000000000000200
The other machines now reject -smp cpus=2 just like -smp cpus=3 and up.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Commit message expanded]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200609122339.937862-5-armbru@redhat.com>
pxa2xx_mmci_init() creates a "pxa2xx-mmci" device, but neglects to
realize it. Affects machines akita, borzoi, connex, mainstone, spitz,
terrier, tosa, verdex, and z2.
In theory, a device becomes real only on realize. In practice, the
transition from unreal to real is a fuzzy one. The work to make a
device real can be spread between realize methods (fine),
instance_init methods (wrong), and board code wiring up the device
(fine as long as it effectively happens on realize). Depending on
what exactly is done where, a device can work even when we neglect
to realize it.
This one appears to work. Nevertheless, it's a clear misuse of the
interface. Even when it works today (more or less by chance), it can
break tomorrow.
Fix by realizing it right away. Visible in "info qom-tree"; here's
the change for akita:
/machine (akita-machine)
[...]
/unattached (container)
[...]
+ /device[5] (pxa2xx-mmci)
+ /pxa2xx-mmci[0] (qemu:memory-region)
+ /sd-bus (pxa2xx-mmci-bus)
[rest of device[*] renumbered...]
Fixes: 7a9468c925
Cc: Andrzej Zaborowski <balrogg@gmail.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: qemu-arm@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200609122339.937862-4-armbru@redhat.com>
xlnx_dp_init() creates these two devices, but they're never realized.
Affects machine xlnx-zcu102.
In theory, a device becomes real only on realize. In practice, the
transition from unreal to real is a fuzzy one. The work to make a
device real can be spread between realize methods (fine),
instance_init methods (wrong), and board code wiring up the device
(fine as long as it effectively happens on realize). Depending on
what exactly is done where, a device can work even when we neglect to
realize it.
These two appear to work. Nevertheless, it's a clear misuse of the
interface. Even when it works today (more or less by chance), it can
break tomorrow.
Fix by realizing them in xlnx_dp_realize().
Fixes: 58ac482a66
Cc: KONRAD Frederic <fred.konrad@greensocs.com>
Cc: Alistair Francis <alistair@alistair23.me>
Cc: "Edgar E. Iglesias" <edgar.iglesias@gmail.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: qemu-arm@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20200609122339.937862-3-armbru@redhat.com>
stm32f405_soc_initfn() creates six such devices, but
stm32f405_soc_realize() realizes only one. Affects machine
netduinoplus2.
In theory, a device becomes real only on realize. In practice, the
transition from unreal to real is a fuzzy one. The work to make a
device real can be spread between realize methods (fine),
instance_init methods (wrong), and board code wiring up the device
(fine as long as it effectively happens on realize). Depending on
what exactly is done where, a device can work even when we neglect
to realize it.
The five unrealized devices appear to stay unreal: neither MMIO nor
IRQ get wired up.
Fix stm32f405_soc_realize() to realize and wire up all six. Visible
in "info qtree":
bus: main-system-bus
type System
dev: stm32f405-soc, id ""
cpu-type = "cortex-m4-arm-cpu"
dev: stm32f2xx-adc, id ""
gpio-out "sysbus-irq" 1
- mmio ffffffffffffffff/00000000000000ff
+ mmio 0000000040012000/00000000000000ff
dev: stm32f2xx-adc, id ""
gpio-out "sysbus-irq" 1
- mmio ffffffffffffffff/00000000000000ff
+ mmio 0000000040012100/00000000000000ff
dev: stm32f2xx-adc, id ""
gpio-out "sysbus-irq" 1
- mmio ffffffffffffffff/00000000000000ff
+ mmio 0000000040012200/00000000000000ff
dev: stm32f2xx-adc, id ""
gpio-out "sysbus-irq" 1
- mmio ffffffffffffffff/00000000000000ff
+ mmio 0000000040012300/00000000000000ff
dev: stm32f2xx-adc, id ""
gpio-out "sysbus-irq" 1
- mmio 0000000040012000/00000000000000ff
+ mmio 0000000040012400/00000000000000ff
dev: stm32f2xx-adc, id ""
gpio-out "sysbus-irq" 1
- mmio ffffffffffffffff/00000000000000ff
+ mmio 0000000040012500/00000000000000ff
dev: armv7m, id ""
Fixes: 529fc5fd3e
Cc: Alistair Francis <alistair@alistair23.me>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: qemu-arm@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200609122339.937862-2-armbru@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
"info qom-tree" prints children in unstable order. This is a pain
when diffing output for different versions to find change. Print it
sorted.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200527084754.7531-3-armbru@redhat.com>
Tested-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Suggested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200527084754.7531-2-armbru@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
This patch adds translation of QEMU to Swedish.
Signed-off-by: Sebastian Rasmussen <sebras@gmail.com>
Signed-off-by: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com>
Reviewed-by: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com>
Message-Id: <20200611114523.15584-2-aleksandar.qemu.devel@gmail.com>
This patch transfers sh4 sections to Yoshinori Sato, who is
best positioned in the community to assume sh4 maintainership.
He is the maintainer of the related target rx as well, which
means that some synergy between the two targets can be expected
in future.
Further adjustments, reorganizations, and improvements of sh4
sections are left to the future maintainer to be devised and
executed, as he deems suitable.
Aurelien and Magnus are deleted as maintainers in some sections
of the MAINTAINERS file with this patch. However, they will not
be deleted from QEMU Hall of Fame, where their names will always
remained carved in stone as QEMU pioneers and granddaddies.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Aurelien Jarno <aurelien@aurel32.net>
Acked-by: Magnus Damm <magnus.damm@gmail.com>
Acked-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20200611095316.10133-2-aleksandar.qemu.devel@gmail.com>
Abbreviations of vendor-specific ASEs looks very similiar.
Add comments to explain the full name and vendors of these flags.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com>
Signed-off-by: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com>
Message-Id: <20200614080049.31134-3-jiaxun.yang@flygoat.com>
To match the actual status of Loongson insn, we split flags
for LMMI and LEXT from INSN_LOONGSON2F.
As Loongson-2F only implemented interger part of LEXT, we'll
not enable LEXT for the processor, but instead we're still using
INSN_LOONGSON2F as switch flag of these instructions.
All multimedia instructions have been moved to LMMI flag. Loongson-2F
and Loongson-3A are sharing these instructions.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com>
Signed-off-by: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com>
Message-Id: <20200614080049.31134-2-jiaxun.yang@flygoat.com>
The git-submodule.sh script is called by make and initialize the
submodules listed in the GIT_SUBMODULES variable generated by
./configure.
SLOF is required for building the s390-ccw firmware on s390x, since
it is using the libnet code from SLOF for network booting.
Add it to the GIT_SUBMODULES when building the s390-ccw firmware.
Reported-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Suggested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200615074919.12552-1-f4bug@amsat.org>
[thuth: Tweaked the commit message a little bit]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Now that we can select the second serial console in the acceptance tests
(see commit 746f244d97 "Allow to use other serial consoles than default"),
we can also test the sh4 image from the QEMU advent calendar 2018.
Message-Id: <20200515164337.4899-1-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
It's either "GNU *Library* General Public License version 2" or "GNU
Lesser General Public License version *2.1*", but there was no "version
2.0" of the "Lesser" license. So assume that version 2.1 is meant here.
Message-Id: <20200605100645.6506-1-thuth@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
It is neater to keep this in the QEMU repo, since any change that
requires an update to the oss-fuzz build configuration, can make the
necessary changes in the same series.
Suggested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Message-Id: <20200612055145.12101-1-alxndr@bu.edu>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20200529221450.26673-3-alxndr@bu.edu>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The QTest server usually parses ASCII commands from clients. Since we
fuzz within the QEMU process, skip the QTest serialization and server
for most QTest commands. Leave the option to use the ASCII protocol, to
generate readable traces for crash reproducers.
Inspired-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20200529221450.26673-2-alxndr@bu.edu>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
When configure is run with "--disable-tpm", the bios-tables-test
q35/tis test fails with "-tpmdev: invalid option".
Skip the test if CONFIG_TPM is unset.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reported-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200615135051.2213-1-eric.auger@redhat.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
Fixes: 5da7c35e25 ("bios-tables-test: Add Q35/TPM-TIS test")
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
According to the gcrypt documentation it's intended that
gcry_check_version() is called with the minimum version of gcrypt
needed by the program, not the version from the <gcrypt.h> header file
that happened to be installed when qemu was compiled. Indeed the
gcrypt.h header says that you shouldn't use the GCRYPT_VERSION macro.
This causes the following failure:
qemu-img: Unable to initialize gcrypt
if a slightly older version of libgcrypt is installed with a newer
qemu, even though the slightly older version works fine. This can
happen with RPM packaging which uses symbol versioning to determine
automatically which libgcrypt is required by qemu, which caused the
following bug in RHEL 8:
https://bugzilla.redhat.com/show_bug.cgi?id=1840485
qemu actually requires libgcrypt >= 1.5.0, so we might put the string
"1.5.0" here. However since 1.5.0 was released in 2011, it hardly
seems we need to check that. So I replaced GCRYPT_VERSION with NULL.
Perhaps in future if we move to requiring a newer version of gcrypt we
could put a literal string here.
Signed-off-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Add tests:
test_secret_keyring_good;
test_secret_keyring_revoked_key;
test_secret_keyring_expired_key;
test_secret_keyring_bad_serial_key;
test_secret_keyring_bad_key_access_right;
Added tests require libkeyutils. The absence of this library is not
critical, because these tests will be skipped in this case.
Signed-off-by: Alexey Krasikov <alex-krasikov@yandex-team.ru>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Add the ability for the secret object to obtain secret data from the
Linux in-kernel key managment and retention facility, as an extra option
to the existing ones: reading from a file or passing directly as a
string.
The secret is identified by the key serial number. The upper layers
need to instantiate the key and make sure the QEMU process has access
permissions to read it.
Signed-off-by: Alexey Krasikov <alex-krasikov@yandex-team.ru>
- Fixed up detection logic default behaviour in configure
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Create base class 'common secret'. Move common data and logic from
'secret' to 'common_secret' class. This allowed adding abstraction layer
for easier adding new 'secret' objects in future.
Convert 'secret' class to child from basic 'secret_common' with 'data'
and 'file' properties.
Signed-off-by: Alexey Krasikov <alex-krasikov@yandex-team.ru>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
In case of not using random-number needing feature, it makes sense to
skip RNG init too. This is especially helpful when QEMU is sandboxed in
Stubdomain under Xen, where there is very little entropy so initial
getrandom() call delays the startup several seconds. In that setup, no
random bytes are needed at all.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The last real change to this file is from 2012, so it is very likely
that this file is completely out-of-date and ignored today. Let's
simply remove it to avoid confusion if someone finds it by accident.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20200611172445.5177-1-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Keep them close to the other accelerator-dependent stubs, so as to remove
stubs that are not needed by tools.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When QEMU is used without any graphical window,
QEMU execution is terminated with the signal (e.g., Ctrl-C).
Signal processing in QEMU does not include
qemu_system_shutdown_request call. That is why shutdown
event is not recorded by record/replay in this case.
This patch adds shutdown event to the end of the record log.
Now every replay will shutdown the machine at the end.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Message-Id: <159012995470.27967.18129611453659045726.stgit@pasha-ThinkPad-X280>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The CPUReadMemoryFunc/CPUWriteMemoryFunc typedefs are legacy
remnant from before the conversion to MemoryRegions.
Since they are now only used in tusb6010.c and hcd-musb.c,
move them to "hw/usb/musb.h" and rename them appropriately.
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200601141536.15192-4-f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Markus Armbruster