assertRegexpMatches() has been removed in Python 3.12 and should be replaced by
assertRegex(). See: https://docs.python.org/3.12/whatsnew/3.12.html#id3
Inspired-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20231114144832.71612-1-philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
(cherry picked from commit f0a663b4ce)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
(Mjt: adjust context for before v8.1.0-1582-g684750ab4f
"python/qemu: rename command() to cmd()")
assertEquals() has been removed in Python 3.12 and should be replaced by
assertEqual(). See: https://docs.python.org/3.12/whatsnew/3.12.html#id3
Message-ID: <20231114134326.287242-1-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
(cherry picked from commit 861f724d03)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
(Mjt: adjust context in pc_cpu_hotplug_props.py & cpu_queries.py for before
v8.1.0-1582-g684750ab4f "python/qemu: rename command() to cmd()")
The file offset of the load segment is not relevant to the
low address, only the beginning of the virtual address page.
Cc: qemu-stable@nongnu.org
Fixes: a93934fecd ("elf: take phdr offset into account when calculating the program load address")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1952
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
(cherry picked from commit 82d70a84c8)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Recently MemReentrancyGuard was added to DeviceState to record that the
device is engaging in I/O. The network device backend needs to update it
when delivering a packet to a device.
This implementation follows what bottom half does, but it does not add
a tracepoint for the case that the network device backend started
delivering a packet to a device which is already engaging in I/O. This
is because such reentrancy frequently happens for
qemu_flush_queued_packets() and is insignificant.
Fixes: CVE-2023-3019
Reported-by: Alexander Bulekov <alxndr@bu.edu>
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Acked-by: Alexander Bulekov <alxndr@bu.edu>
Signed-off-by: Jason Wang <jasowang@redhat.com>
(cherry picked from commit 9050f976e4)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Recently MemReentrancyGuard was added to DeviceState to record that the
device is engaging in I/O. The network device backend needs to update it
when delivering a packet to a device.
In preparation for such a change, add MemReentrancyGuard * as a
parameter of qemu_new_nic().
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Alexander Bulekov <alxndr@bu.edu>
Signed-off-by: Jason Wang <jasowang@redhat.com>
(cherry picked from commit 7d0fefdf81)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
(Mjt: fixup in hw/net/xen_nic.c due to lack of v8.1.0-2771-g25967ff69f
"hw/xen: update Xen PV NIC to XenDevice model"
and removed hw/net/igb.c bits)
Legacy software contains a standard mechanism for generating a reset to a
Serial ATA device - setting the SRST (software reset) bit in the Device
Control register.
Serial ATA has a more robust mechanism called COMRESET, also referred to
as port reset. A port reset is the preferred mechanism for error
recovery and should be used in place of software reset.
Commit e2a5d9b3d9 ("hw/ide/ahci: simplify and document PxCI handling")
(mjt: 1e5ad6b06b in stable-7.2 series, v7.2.6)
improved the handling of PxCI, such that PxCI gets cleared after handling
a non-NCQ, or NCQ command (instead of incorrectly clearing PxCI after
receiving anything - even a FIS that failed to parse, which should NOT
clear PxCI, so that you can see which command slot that caused an error).
However, simply clearing PxCI after a non-NCQ, or NCQ command, is not
enough, we also need to clear PxCI when receiving a SRST in the Device
Control register.
A legacy software reset is performed by the host sending two H2D FISes,
the first H2D FIS asserts SRST, and the second H2D FIS deasserts SRST.
The first H2D FIS will not get a D2H reply, and requires the FIS to have
the C bit set to one, such that the HBA itself will clear the bit in PxCI.
The second H2D FIS will get a D2H reply once the diagnostic is completed.
The clearing of the bit in PxCI for this command should ideally be done
in ahci_init_d2h() (if it was a legacy software reset that caused the
reset (a COMRESET does not use a command slot)). However, since the reset
value for PxCI is 0, modify ahci_reset_port() to actually clear PxCI to 0,
that way we can avoid complex logic in ahci_init_d2h().
This fixes an issue for FreeBSD where the device would fail to reset.
The problem was not noticed in Linux, because Linux uses a COMRESET
instead of a legacy software reset by default.
Fixes: e2a5d9b3d9 ("hw/ide/ahci: simplify and document PxCI handling")
Reported-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Message-ID: <20231108222657.117984-1-nks@flawful.org>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Tested-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit eabb921250)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
(Mjt: mention 1e5ad6b06b for stable-7.2)
this name is used by capstone and will lead to a build failure of QEMU,
when capstone is enabled. So we rename it to tricore_has_feature(), to
match has_feature() in translate.c.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1774
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230721060605.76636-1-kbastian@mail.uni-paderborn.de>
(cherry picked from commit f8cfdd2038)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
(Mjt: update context in target/tricore/cpu.c, target/tricore/op_helper.c, drop chunks in target/tricore/helper.c)
This is an error in Python 3.12; fix it by using a raw string literal.
Cc: <qemu-stable@nongnu.org>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20231108105649.60453-1-marcandre.lureau@redhat.com>
(cherry picked from commit 4d96307c5b)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Add a small test to prevent regressions.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20231106093605.1349201-5-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
(cherry picked from commit ebc14107f1)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
(Mjt: context fix in tests/tcg/s390x/Makefile.target)
LAALG uses op_laa() and wout_addu64(). The latter expects cc_src to be
set, but the former does not do it. This can lead to assertion failures
if something sets cc_src to neither 0 nor 1 before.
Fix by introducing op_laa_addu64(), which sets cc_src, and using it for
LAALG.
Fixes: 4dba4d6fef ("target/s390x: Use atomic operations for LOAD AND OP")
Cc: qemu-stable@nongnu.org
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20231106093605.1349201-4-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
(cherry picked from commit bea402482a)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Before commit "hw/ide: reset: cancel async DMA operation before
resetting state", this test would fail, because a reset with a
pending write operation would lead to an unsolicited write to the
first sector of the disk.
The test writes a pattern to the beginning of the disk and verifies
that it is still intact after a reset with a pending operation. It
also checks that the pending operation actually completes correctly.
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Message-ID: <20230906130922.142845-2-f.ebner@proxmox.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
(cherry picked from commit cc610857bb)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
If there is a pending DMA operation during ide_bus_reset(), the fact
that the IDEState is already reset before the operation is canceled
can be problematic. In particular, ide_dma_cb() might be called and
then use the reset IDEState which contains the signature after the
reset. When used to construct the IO operation this leads to
ide_get_sector() returning 0 and nsector being 1. This is particularly
bad, because a write command will thus destroy the first sector which
often contains a partition table or similar.
Traces showing the unsolicited write happening with IDEState
0x5595af6949d0 being used after reset:
> ahci_port_write ahci(0x5595af6923f0)[0]: port write [reg:PxSCTL] @ 0x2c: 0x00000300
> ahci_reset_port ahci(0x5595af6923f0)[0]: reset port
> ide_reset IDEstate 0x5595af6949d0
> ide_reset IDEstate 0x5595af694da8
> ide_bus_reset_aio aio_cancel
> dma_aio_cancel dbs=0x7f64600089a0
> dma_blk_cb dbs=0x7f64600089a0 ret=0
> dma_complete dbs=0x7f64600089a0 ret=0 cb=0x5595acd40b30
> ahci_populate_sglist ahci(0x5595af6923f0)[0]
> ahci_dma_prepare_buf ahci(0x5595af6923f0)[0]: prepare buf limit=512 prepared=512
> ide_dma_cb IDEState 0x5595af6949d0; sector_num=0 n=1 cmd=DMA WRITE
> dma_blk_io dbs=0x7f6420802010 bs=0x5595ae2c6c30 offset=0 to_dev=1
> dma_blk_cb dbs=0x7f6420802010 ret=0
> (gdb) p *qiov
> $11 = {iov = 0x7f647c76d840, niov = 1, {{nalloc = 1, local_iov = {iov_base = 0x0,
> iov_len = 512}}, {__pad = "\001\000\000\000\000\000\000\000\000\000\000",
> size = 512}}}
> (gdb) bt
> #0 blk_aio_pwritev (blk=0x5595ae2c6c30, offset=0, qiov=0x7f6420802070, flags=0,
> cb=0x5595ace6f0b0 <dma_blk_cb>, opaque=0x7f6420802010)
> at ../block/block-backend.c:1682
> #1 0x00005595ace6f185 in dma_blk_cb (opaque=0x7f6420802010, ret=<optimized out>)
> at ../softmmu/dma-helpers.c:179
> #2 0x00005595ace6f778 in dma_blk_io (ctx=0x5595ae0609f0,
> sg=sg@entry=0x5595af694d00, offset=offset@entry=0, align=align@entry=512,
> io_func=io_func@entry=0x5595ace6ee30 <dma_blk_write_io_func>,
> io_func_opaque=io_func_opaque@entry=0x5595ae2c6c30,
> cb=0x5595acd40b30 <ide_dma_cb>, opaque=0x5595af6949d0,
> dir=DMA_DIRECTION_TO_DEVICE) at ../softmmu/dma-helpers.c:244
> #3 0x00005595ace6f90a in dma_blk_write (blk=0x5595ae2c6c30,
> sg=sg@entry=0x5595af694d00, offset=offset@entry=0, align=align@entry=512,
> cb=cb@entry=0x5595acd40b30 <ide_dma_cb>, opaque=opaque@entry=0x5595af6949d0)
> at ../softmmu/dma-helpers.c:280
> #4 0x00005595acd40e18 in ide_dma_cb (opaque=0x5595af6949d0, ret=<optimized out>)
> at ../hw/ide/core.c:953
> #5 0x00005595ace6f319 in dma_complete (ret=0, dbs=0x7f64600089a0)
> at ../softmmu/dma-helpers.c:107
> #6 dma_blk_cb (opaque=0x7f64600089a0, ret=0) at ../softmmu/dma-helpers.c:127
> #7 0x00005595ad12227d in blk_aio_complete (acb=0x7f6460005b10)
> at ../block/block-backend.c:1527
> #8 blk_aio_complete (acb=0x7f6460005b10) at ../block/block-backend.c:1524
> #9 blk_aio_write_entry (opaque=0x7f6460005b10) at ../block/block-backend.c:1594
> #10 0x00005595ad258cfb in coroutine_trampoline (i0=<optimized out>,
> i1=<optimized out>) at ../util/coroutine-ucontext.c:177
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: simon.rowe@nutanix.com
Message-ID: <20230906130922.142845-1-f.ebner@proxmox.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
(cherry picked from commit 7d7512019f)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The PC offset is *signed*.
Cc: qemu-stable@nongnu.org
Reported-by: Sergey Evlashev <vectorchiefrocks@gmail.com>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1624
Fixes: c7a9ef7517 ("target/mips: Introduce decode tree bindings for MSA ASE")
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230914085807.12241-1-philmd@linaro.org>
(cherry picked from commit 04591b3ddd)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Scale factor needs to be applied when calculating width/height of the
GTK windows.
Cc: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Dongwon Kim <dongwon.kim@intel.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20231012222643.13996-1-dongwon.kim@intel.com>
(cherry picked from commit 47fd6ab1e3)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Fixes the GL context creation from a widget that isn't yet realized (in
a hidden tab for example).
Resolves:
https://gitlab.com/qemu-project/qemu/-/issues/1727
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Antonio Caggiano <quic_acaggian@quicinc.com>
Message-Id: <20231017111642.1155545-1-marcandre.lureau@redhat.com>
(cherry picked from commit 565f85a9c2)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Pixman routines can fail if no implementation is available and it will
become optional soon so add fallbacks when pixman does not work.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Acked-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-ID: <ed0fba3f74e48143f02228b83bf8796ca49f3e7d.1698871239.git.balaton@eik.bme.hu>
(cherry picked from commit 08730ee0cc)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
NVMeQueuePair::reqs has length NVME_NUM_REQS, which less than
NVME_QUEUE_SIZE by 1.
Fixes: 1086e95da1 ("block/nvme: switch to a NVMeRequest freelist")
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Maksim Davydov <davydov-max@yandex-team.ru>
Message-id: 20231017125941.810461-5-vsementsov@yandex-team.ru
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit cc8fb0c3ae)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
In a two-stage translation, the result of the BTI guarded bit should
be the guarded bit from the first stage of translation, as there is
no BTI guard information in stage two. Our code tried to do this,
but got it wrong, because we currently have two fields where the GP
bit information might live (ARMCacheAttrs::guarded and
CPUTLBEntryFull::extra::arm::guarded), and we were storing the GP bit
in the latter during the stage 1 walk but trying to copy the former
in combine_cacheattrs().
Remove the duplicated storage, and always use the field in
CPUTLBEntryFull; correctly propagate the stage 1 value to the output
in get_phys_addr_twostage().
Note for stable backports: in v8.0 and earlier the field is named
result->f.guarded, not result->f.extra.arm.guarded.
Cc: qemu-stable@nongnu.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1950
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20231031173723.26582-1-peter.maydell@linaro.org
(cherry picked from commit 4c09abeae8)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
(Mjt: replace f.extra.arm.guarded -> f.guarded due to v8.1.0-1179-ga81fef4b64)
We currently don't correctly handle the VSTCR_EL2.SW and VTCR_EL2.NSW
configuration bits. These allow configuration of whether the stage 2
page table walks for Secure IPA and NonSecure IPA should do their
descriptor reads from Secure or NonSecure physical addresses. (This
is separate from how the translation table base address and other
parameters are set: an NS IPA always uses VTTBR_EL2 and VTCR_EL2
for its base address and walk parameters, regardless of the NSW bit,
and similarly for Secure.)
Provide a new function ptw_idx_for_stage_2() which returns the
MMU index to use for descriptor reads, and use it to set up
the .in_ptw_idx wherever we call get_phys_addr_lpae().
For a stage 2 walk, wherever we call get_phys_addr_lpae():
* .in_ptw_idx should be ptw_idx_for_stage_2() of the .in_mmu_idx
* .in_secure should be true if .in_mmu_idx is Stage2_S
This allows us to correct S1_ptw_translate() so that it consistently
always sets its (out_secure, out_phys) to the result it gets from the
S2 walk (either by calling get_phys_addr_lpae() or by TLB lookup).
This makes better conceptual sense because the S2 walk should return
us an (address space, address) tuple, not an address that we then
randomly assign to S or NS.
Our previous handling of SW and NSW was broken, so guest code
trying to use these bits to put the s2 page tables in the "other"
address space wouldn't work correctly.
Cc: qemu-stable@nongnu.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1600
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230504135425.2748672-3-peter.maydell@linaro.org
(cherry picked from commit fcc0b0418f)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Bit 63 in a Table descriptor is only the NSTable bit for stage 1
translations; in stage 2 it is RES0. We were incorrectly looking at
it all the time.
This causes problems if:
* the stage 2 table descriptor was incorrectly setting the RES0 bit
* we are doing a stage 2 translation in Secure address space for
a NonSecure stage 1 regime -- in this case we would incorrectly
do an immediate downgrade to NonSecure
A bug elsewhere in the code currently prevents us from getting
to the second situation, but when we fix that it will be possible.
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20230504135425.2748672-2-peter.maydell@linaro.org
(cherry picked from commit 21a4ab8318)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
When TCG is disabled this part of the code should not be reachable, so
wrap it with an ifdef for now.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit 0d3de77a07)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
(Mjt: trivial change which makes two subsequent cherry-picks to apply cleanly)
This reverts commit 3cd3df2a95.
glibc has fixed (in 2.36.9000-40-g774058d729) the problem
that caused a clash when both sys/mount.h annd linux/mount.h
are included, and backported this to the 2.36 stable release
too:
https://sourceware.org/glibc/wiki/Release/2.36#Usage_of_.3Clinux.2Fmount.h.3E_and_.3Csys.2Fmount.h.3E
It is saner for QEMU to remove the workaround it applied for
glibc 2.36 and expect distros to ship the 2.36 maint release
with the fix. This avoids needing to add a further workaround
to QEMU to deal with the fact that linux/brtfs.h now also pulls
in linux/mount.h via linux/fs.h since Linux 6.1
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20230110174901.2580297-3-berrange@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
(cherry picked from commit 6003159ce1)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This reverts commit c5495f4ecb.
glibc has fixed (in 2.36.9000-40-g774058d729) the problem
that caused a clash when both sys/mount.h annd linux/mount.h
are included, and backported this to the 2.36 stable release
too:
https://sourceware.org/glibc/wiki/Release/2.36#Usage_of_.3Clinux.2Fmount.h.3E_and_.3Csys.2Fmount.h.3E
It is saner for QEMU to remove the workaround it applied for
glibc 2.36 and expect distros to ship the 2.36 maint release
with the fix. This avoids needing to add a further workaround
to QEMU to deal with the fact that linux/brtfs.h now also pulls
in linux/mount.h via linux/fs.h since Linux 6.1
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20230110174901.2580297-2-berrange@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
(cherry picked from commit 9f0246539a)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Before previous commit, rebase was getting infitely stuck in case of
rebasing within the same backing chain and when overlay_size > backing_size.
Let's add this case to the rebasing test 024 to make sure it doesn't
break again.
Signed-off-by: Andrey Drobyshev <andrey.drobyshev@virtuozzo.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Message-ID: <20230919165804.439110-3-andrey.drobyshev@virtuozzo.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit 827171c318)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
In case when we're rebasing within one backing chain, and when target image
is larger than old backing file, bdrv_is_allocated_above() ends up setting
*pnum = 0. As a result, target offset isn't getting incremented, and we
get stuck in an infinite for loop. Let's detect this case and proceed
further down the loop body, as the offsets beyond the old backing size need
to be explicitly zeroed.
Signed-off-by: Andrey Drobyshev <andrey.drobyshev@virtuozzo.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Message-ID: <20230919165804.439110-2-andrey.drobyshev@virtuozzo.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit 8b097fd6b0)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
A build of GCC 13.2 will have stack protector enabled by default if it
was configured with --enable-default-ssp option. For such a compiler,
it is necessary to explicitly disable stack protector when linking
without standard libraries.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20230731091042.139159-3-akihiko.odaki@daynix.com>
[AJB: fix comment string typo]
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20231029145033.592566-3-alex.bennee@linaro.org>
(cherry picked from commit 580731dcc8)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
A build of GCC 13.2 will have stack protector enabled by default if it
was configured with --enable-default-ssp option. For such a compiler,
it is necessary to explicitly disable stack protector when linking
without standard libraries.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230731091042.139159-2-akihiko.odaki@daynix.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
(cherry picked from commit 7a06a8fec9)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Testing of the LED state showed that when the LED polarity was
set to GPIO_POLARITY_ACTIVE_LOW and a low logic value was set on
the input GPIO of the LED, the LED was being turn off when it was
expected to be turned on.
Fixes: ddb67f6402 ("hw/misc/led: Allow connecting from GPIO output")
Signed-off-by: Glenn Miles <milesg@linux.vnet.ibm.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Message-id: 20231024191945.4135036-1-milesg@linux.vnet.ibm.com
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit 6f83dc6716)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Block Size Register bits [14:12] is SDMA Buffer Boundary, it is missed
in register write, but it is needed in SDMA transfer. e.g. it will be
used in sdhci_sdma_transfer_multi_blocks to calculate boundary_ variables.
Missing this field will cause wrong operation for different SDMA Buffer
Boundary settings.
Fixes: d7dfca0807 ("hw/sdhci: introduce standard SD host controller")
Fixes: dfba99f17f ("hw/sdhci: Fix DMA Transfer Block Size field")
Signed-off-by: Lu Gao <lu.gao@verisilicon.com>
Signed-off-by: Jianxian Wen <jianxian.wen@verisilicon.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-ID: <20220321055618.4026-1-lu.gao@verisilicon.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
(cherry picked from commit ae5f70baf5)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Those PS/2 ports are created with the LASI controller when
a 32-bit PA-RISC machine is created.
Mark them not user-createable to avoid showing them in
the qemu device list.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: qemu-stable@nongnu.org
(cherry picked from commit a1e6a5c462)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
sh4 uses gUSA (general UserSpace Atomicity) to provide atomicity on CPUs
that don't have atomic instructions. A gUSA region that adds 1 to an
atomic variable stored in @R2 looks like this:
4004b6: 03 c7 mova 4004c4 <gusa+0x10>,r0
4004b8: f3 61 mov r15,r1
4004ba: 09 00 nop
4004bc: fa ef mov #-6,r15
4004be: 22 63 mov.l @r2,r3
4004c0: 01 73 add #1,r3
4004c2: 32 22 mov.l r3,@r2
4004c4: 13 6f mov r1,r15
R0 contains a pointer to the end of the gUSA region
R1 contains the saved stack pointer
R15 contains negative length of the gUSA region
When this region is interrupted by a signal, the kernel detects if
R15 >= -128U. If yes, the kernel rolls back PC to the beginning of the
region and restores SP by copying R1 to R15.
The problem happens if we are interrupted by a signal at address 4004c4.
R15 still holds the value -6, but the atomic value was already written by
an instruction at address 4004c2. In this situation we can't undo the
gUSA. The function unwind_gusa does nothing, the signal handler attempts
to push a signal frame to the address -6 and crashes.
This patch fixes it, so that if we are interrupted at the last instruction
in a gUSA region, we copy R1 to R15 to restore the correct stack pointer
and avoid crashing.
There's another bug: if we are interrupted in a delay slot, we save the
address of the instruction in the delay slot. We must save the address of
the previous instruction.
Cc: qemu-stable@nongnu.org
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Reviewed-by: Yoshinori Sato <ysato@users.sourcefoege.jp>
Message-Id: <b16389f7-6c62-70b7-59b3-87533c0bcc@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
(cherry picked from commit 3b894b699c)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
QEMU mips userspace emulation crashes with "qemu: unhandled CPU exception
0x15 - aborting" when one of the integer arithmetic instructions detects
an overflow.
This patch fixes it so that it delivers SIGFPE with FPE_INTOVF instead.
Cc: qemu-stable@nongnu.org
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Message-Id: <3ef979a8-3ee1-eb2d-71f7-d788ff88dd11@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
(cherry picked from commit 6fad9b4bb9)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The migration code uses unsigned values for 16, 32 and 64-bit
operations. Fix the script to do the same.
This was causing an issue when parsing the migration stream generated
on the ppc64 target because one of instance_ids was larger than the
32bit signed maximum:
Traceback (most recent call last):
File "/home/fabiano/kvm/qemu/build/scripts/analyze-migration.py", line 658, in <module>
dump.read(dump_memory = args.memory)
File "/home/fabiano/kvm/qemu/build/scripts/analyze-migration.py", line 592, in read
classdesc = self.section_classes[section_key]
KeyError: ('spapr_iommu', -2147483648)
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231009184326.15777-6-farosas@suse.de>
(cherry picked from commit caea03279e)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Guest driver allocates and initialize page tables to be used as a ring
of descriptors for CQ and async events.
The page table that represents the ring, along with the number of pages
in the page table is passed to the device.
Currently our device supports only one page table for a ring.
Let's make sure that the number of page table entries the driver
reports, do not exceeds the one page table size.
Reported-by: Soul Chen <soulchen8650@gmail.com>
Signed-off-by: Yuval Shaia <yuval.shaia.ml@gmail.com>
Fixes: CVE-2023-1544
Message-ID: <20230301142926.18686-1-yuval.shaia.ml@gmail.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
(cherry picked from commit 85fc35afa9)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Fix the inverted order of pmpaddr13 and pmpaddr14 in csr_name().
Signed-off-by: Alvin Chang <alvinga@andestech.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20230907084500.328-1-alvinga@andestech.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
(cherry picked from commit cffa995490)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reset the current sample counter when writing the Channel Sample
Count Register. The Linux ens1370 driver and the AROS sb128
driver expect the current sample counter counts down from sample
count to 0 after a write to the Channel Sample Count Register.
Currently the current sample counter starts from 0 after a reset
or the last count when the counter was stopped.
The current sample counter is used to raise an interrupt whenever
a complete buffer was transferred. When the counter starts with a
value lower than the reload value, the interrupt triggeres before
the buffer was completly transferred. This may lead to corrupted
audio streams.
Tested-by: Rene Engel <ReneEngel80@emailn.de>
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Tested-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <20230917065813.6692-1-vr_qemu@t-online.de>
(cherry picked from commit 00e3b29d06)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
QEMU will crash if anyone tries to set tls-authz (which is a type
StrOrNull) with 'null' value. Fix it in the easy way by converting it to
qstring just like the other two tls parameters.
Cc: qemu-stable@nongnu.org # v4.0+
Fixes: d2f1d29b95 ("migration: add support for a "tls-authz" migration parameter")
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230905162335.235619-2-peterx@redhat.com>
(cherry picked from commit 86dec715a7)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
(Mjt: the function is in m/migration.c, not m/option.c; minor context tweak)
An MSI from I/O APIC may not exactly equal to APIC_DEFAULT_ADDRESS. In
fact, Windows 17763.3650 configures I/O APIC to set the dest_mode bit.
Cover the range assigned to APIC.
Fixes: 577c470f43 ("x86_iommu/amd: Prepare for interrupt remap support")
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20230921114612.40671-1-akihiko.odaki@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit 0114c45130)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Use abi_ullong not uint64_t so that the alignment of the field
and therefore the layout of the struct is correct.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
(cherry picked from commit 33bc4fa78b)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
When starting a guest via libvirt with "virsh start --console ...",
the first second of the console output is missing. This is especially
annoying on s390x that only has a text console by default and no graphical
output - if the bios fails to boot here, the information about what went
wrong is completely lost.
One part of the problem (there is also some things to be done on the
libvirt side) is that QEMU only checks with a 1 second timer whether
the other side of the pty is already connected, so the first second of
the console output is always lost.
This likely used to work better in the past, since the code once checked
for a re-connection during write, but this has been removed in commit
f8278c7d74 ("char-pty: remove the check for connection on write") to avoid
some locking.
To ease the situation here at least a little bit, let's check with g_poll()
whether we could send out the data anyway, even if the connection has not
been marked as "connected" yet. The file descriptor is marked as non-blocking
anyway since commit fac6688a18 ("Do not hang on full PTY"), so this should
not cause any trouble if the other side is not ready for receiving yet.
With this patch applied, I can now successfully see the bios output of
a s390x guest when running it with "virsh start --console" (with a patched
version of virsh that fixes the remaining issues there, too).
Reported-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20230816210743.1319018-1-thuth@redhat.com>
(cherry picked from commit 4f7689f081)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
(Mjt: use TFR() instead of RETRY_ON_EINTR() before v7.2.0-538-g8b6aa69365)
The fw_cfg DMA write callback in ramfb prepares a new display surface in
QEMU; this new surface is put to use ("swapped in") upon the next display
update. At that time, the old surface (if any) is released.
If the guest triggers the fw_cfg DMA write callback at least twice between
two adjacent display updates, then the second callback (and further such
callbacks) will leak the previously prepared (but not yet swapped in)
display surface.
The issue can be shown by:
(1) starting QEMU with "-trace displaysurface_free", and
(2) running the following program in the guest UEFI shell:
> #include <Library/ShellCEntryLib.h> // ShellAppMain()
> #include <Library/UefiBootServicesTableLib.h> // gBS
> #include <Protocol/GraphicsOutput.h> // EFI_GRAPHICS_OUTPUT_PROTOCOL
>
> INTN
> EFIAPI
> ShellAppMain (
> IN UINTN Argc,
> IN CHAR16 **Argv
> )
> {
> EFI_STATUS Status;
> VOID *Interface;
> EFI_GRAPHICS_OUTPUT_PROTOCOL *Gop;
> UINT32 Mode;
>
> Status = gBS->LocateProtocol (
> &gEfiGraphicsOutputProtocolGuid,
> NULL,
> &Interface
> );
> if (EFI_ERROR (Status)) {
> return 1;
> }
>
> Gop = Interface;
>
> Mode = 1;
> for ( ; ;) {
> Status = Gop->SetMode (Gop, Mode);
> if (EFI_ERROR (Status)) {
> break;
> }
>
> Mode = 1 - Mode;
> }
>
> return 1;
> }
The symptom is then that:
- only one trace message appears periodically,
- the time between adjacent messages keeps increasing -- implying that
some list structure (containing the leaked resources) keeps growing,
- the "surface" pointer is ever different.
> 18566@1695127471.449586:displaysurface_free surface=0x7f2fcc09a7c0
> 18566@1695127471.529559:displaysurface_free surface=0x7f2fcc9dac10
> 18566@1695127471.659812:displaysurface_free surface=0x7f2fcc441dd0
> 18566@1695127471.839669:displaysurface_free surface=0x7f2fcc0363d0
> 18566@1695127472.069674:displaysurface_free surface=0x7f2fcc413a80
> 18566@1695127472.349580:displaysurface_free surface=0x7f2fcc09cd00
> 18566@1695127472.679783:displaysurface_free surface=0x7f2fcc1395f0
> 18566@1695127473.059848:displaysurface_free surface=0x7f2fcc1cae50
> 18566@1695127473.489724:displaysurface_free surface=0x7f2fcc42fc50
> 18566@1695127473.969791:displaysurface_free surface=0x7f2fcc45dcc0
> 18566@1695127474.499708:displaysurface_free surface=0x7f2fcc70b9d0
> 18566@1695127475.079769:displaysurface_free surface=0x7f2fcc82acc0
> 18566@1695127475.709941:displaysurface_free surface=0x7f2fcc369c00
> 18566@1695127476.389619:displaysurface_free surface=0x7f2fcc32b910
> 18566@1695127477.119772:displaysurface_free surface=0x7f2fcc0d5a20
> 18566@1695127477.899517:displaysurface_free surface=0x7f2fcc086c40
> 18566@1695127478.729962:displaysurface_free surface=0x7f2fccc72020
> 18566@1695127479.609839:displaysurface_free surface=0x7f2fcc185160
> 18566@1695127480.539688:displaysurface_free surface=0x7f2fcc23a7e0
> 18566@1695127481.519759:displaysurface_free surface=0x7f2fcc3ec870
> 18566@1695127482.549930:displaysurface_free surface=0x7f2fcc634960
> 18566@1695127483.629661:displaysurface_free surface=0x7f2fcc26b140
> 18566@1695127484.759987:displaysurface_free surface=0x7f2fcc321700
> 18566@1695127485.940289:displaysurface_free surface=0x7f2fccaad100
We figured this wasn't a CVE-worthy problem, as only small amounts of
memory were leaked (the framebuffer itself is mapped from guest RAM, QEMU
only allocates administrative structures), plus libvirt restricts QEMU
memory footprint anyway, thus the guest can only DoS itself.
Plug the leak, by releasing the last prepared (not yet swapped in) display
surface, if any, in the fw_cfg DMA write callback.
Regarding the "reproducer", with the fix in place, the log is flooded with
trace messages (one per fw_cfg write), *and* the trace message alternates
between just two "surface" pointer values (i.e., nothing is leaked, the
allocator flip-flops between two objects in effect).
This issue appears to date back to the introducion of ramfb (995b30179b,
"hw/display: add ramfb, a simple boot framebuffer living in guest ram",
2018-06-18).
Cc: Gerd Hoffmann <kraxel@redhat.com> (maintainer:ramfb)
Cc: qemu-stable@nongnu.org
Fixes: 995b30179b
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-ID: <20230919131955.27223-1-lersek@redhat.com>
(cherry picked from commit e0288a7784)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
CVTPS2PD only loads a half-register for memory, unlike the other
operations under 0x0F 0x5A. "Unpack" the group into separate
emission functions instead of using gen_unary_fp_sse.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit abd41884c5)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
CVTPS2PD only loads a half-register for memory, like CVTPH2PS. It can
reuse the "ph" packed half-precision size to load a half-register,
but rename it to "xh" because it is now a variation of "x" (it is not
used only for half-precision values).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit a48b26978a)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Before this change, MOVNTPS and MOVNTPD were labeled as Exception Class
4 (only requiring alignment for legacy SSE instructions). This changes
them to Exception Class 1 (always requiring memory alignment), as
documented in the Intel manual.
Message-Id: <20230501111428.95998-3-ricky@rzhou.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 8bf171c2d1)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Fix the exception classes for some SSE/AVX instructions to match what is
documented in the Intel manual.
These changes are expected to have no functional effect on the behavior
that qemu implements (primarily >= 16-byte memory alignment checks). For
instance, since qemu does not implement the AC flag, there is no
difference in behavior between Exception Classes 4 and 5 for
instructions where the SSE version only takes <16 byte memory operands.
Message-Id: <20230501111428.95998-2-ricky@rzhou.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit cab529b0dc)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Adds some comments describing what instructions correspond to decoding
table entries and fixes some existing comments which named the wrong
instruction.
Message-Id: <20230501111428.95998-1-ricky@rzhou.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit afa94dabc5)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The instructions also use bits 3 and 7 of their 8-byte immediate.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 9e65829699)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Philippe Mathieu-Daudé