This is not ideal, since it requires all cross-compilers
to be present rather than a simple subset. But since it
is only run manually, should be good enough for now.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Stop applying config-host.mak to the sourcesets, since it does not
have any more CONFIG_* symbols coming from the command line.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This is yet another make target you usually run in the top level of
the source directory.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230630180423.558337-11-alex.bennee@linaro.org>
In commit b0fcc6fc7f ("build: rebuild build.ninja using
"meson setup --reconfigure"", 2023-05-19) I changed the build.ninja
rule in the Makefile to use "meson setup" so that the Makefile would
pick up a changed path to the meson binary.
However, there was a reason why build.ninja was rebuilt using $(NINJA)
itself. Namely, ninja has its own cache of file modification times,
and if it does not know about the modification that was done outside
its control, it will *also* try to regenerate build.ninja. This can be
simply by running "make" on a fresh tree immediately after "configure";
that will trigger an unnecessary meson run.
So, apply a refinement to the rule in order to cover both cases:
- track the meson binary that was used (and that is embedded in
build.ninja's reconfigure rules); to do this, write build.ninja.stamp
right after executing meson successfully
- if it changed, force usage of "$(MESON) setup --reconfigure" to
update the path in the reconfigure rule
- if it didn't change, use "$(NINJA) build.ninja" just like before
commit b0fcc6fc7f.
Reported-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The only remaining user of submodules at build time is roms/SLOF,
which is handled in pc-bios/s390-ccw/Makefile. Remove the relevant
code from the main makefile.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Print exactly which submodules have been updated, by reusing the logic of
"git-submodule.sh validate" after executing "git submodule update --init'.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The scenario for which --with-git= was introduced was to use a SOCKS proxy
such as tsocks. However, this was back in 2017 when QEMU's submodules
used the git:// protocol, and it is not as important when using the
"smart HTTP" backend; for example, neither "meson subprojects download"
nor scripts/checkpatch.pl obey the GIT environment variable.
So remove the knob, but test for the presence of git in the configure and
git-submodule.sh scripts, and suggest using --with-git-submodules=validate
+ a manual invocation of git-submodule.sh when git does not work. Hopefully
in the future the GIT environment variable will be supported by Meson.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Do not use the rule in build.ninja, because the path to meson is hardcoded
in build.ninja and this breaks if meson moves (for example if the distro
meson suddenly becomes too old after an update).
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Run 'make distclean' in a tree, and GNUmakefile is removed.
But, GNUmakefile is where we change directory to build.
Run 'make distclean' or 'make clean' again, and Makefile applies
the clean actions, such as this one, at the top level of the tree.
For example, it removes the .d source files in 'meson/test cases/d/*/*.d'.
find . \( -name '*.so' -o -name '*.dll' -o \
-name '*.[oda]' -o -name '*.gcno' \) -type f \
! -path ./roms/edk2/ArmPkg/Library/GccLto/liblto-aarch64.a \
! -path ./roms/edk2/ArmPkg/Library/GccLto/liblto-arm.a \
-exec rm {} +
To fix, remove clean and distclean from UNCHECKED_GOALS, so those targets
are "checked", meaning that configure must be run before make. However,
the check action does not trigger, because clean does not depend on
config-host.mak, so change the action to simply throw an error.
Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Message-Id: <1681909700-94095-1-git-send-email-steven.sistare@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
So make distclean should remove it with -rf, not -f alone.
It has been that way since it was included.
ommit cf60ccc330
Author: Akihiko Odaki <akihiko.odaki@gmail.com>
Date: Fri Jun 24 23:50:37 2022 +0900
cutils: Introduce bundle mechanism
Fixes: cf60ccc330
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20230301111910.1660-1-quintela@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Meson supports an "uninstall", so we can easily allow it to work by
not suppressing the forwarding of it from Make to meson.
We originally suppressed this because Meson's 'uninstall' has a hole
in it: it will remove everything that is installed by a mechanism
meson knows about, but not things installed by "custom install
scripts", and there is no "custom uninstall script" mechanism.
For QEMU, though, the only thing that was being installed by a custom
install script was the LC_MESSAGES files handled by Meson's i18n
module, and that code was fixed in Meson commit 487d45c1e5bfff0fbdb4,
which is present in Meson 0.60.0 and later. Since we already require
a Meson version newer than that, we're now safe to enable
'uninstall', as it will now correctly uninstall everything that was
installed.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/109
Message-Id: <20230110151250.24434-1-peter.maydell@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Remove the symlink to tests/tcg/config-*.mak, which is possible now
that unused target config files are not created either.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220929114231.583801-28-alex.bennee@linaro.org>
It will not be specific to tests/tcg anymore, since it will be possible to
build firmware using container-based cross compilers too.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220929114231.583801-26-alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220929114231.583801-17-alex.bennee@linaro.org>
Because of two stray parentheses at the end of the definition of
ninja-cmd-goals, the test that is last in the .check-TESTSUITENAME.deps
variable will not be rebuilt. Fix that.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Developers often run QEMU without installing. The bundle mechanism
allows to look up files which should be present in installation even in
such a situation.
It is a general mechanism and can find any files in the installation
tree. The build tree will have a new directory, qemu-bundle, to
represent what files the installation tree would have for reference by
the executables.
Note that it abandons compatibility with Windows older than 8. The
extended support for the prior version, 7 ended more than 2 years ago,
and it is unlikely that someone would like to run the latest QEMU on
such an old system.
Signed-off-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220624145039.49929-3-akihiko.odaki@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit 45f1eecdd6 removed the dependency
from configure to pc-bios
Signed-off-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Message-Id: <20220624150258.50449-1-akihiko.odaki@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Include the full path in TARGET_DIR, so that messages from sub-Makefiles
are clearer. Also, prepare for possibly building firmware outside
pc-bios/ from the Makefile,
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Let any make target specify ninja goals that needs to be built for it
(though selecting the goals is _not_ recursive on depending targets)
instead of having a custom mechanism only for "make check" and "make
bench".
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220517092616.1272238-4-pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220527153603.887929-15-alex.bennee@linaro.org>
Fix an incorrect "@@:" and move "-d keepdepfile" to the NINJAFLAGS variable.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220517092616.1272238-3-pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220527153603.887929-14-alex.bennee@linaro.org>
Left over .gcno files from old builds can really confuse gcov and the
user expects a clean slate after "make clean". Make clean mean clean.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220204204335.1689602-4-alex.bennee@linaro.org>
This introduces
https://gitlab.com/libvirt/libvirt-ci
as a git submodule at tests/lcitool/libvirt-ci
The 'lcitool' program within this submodule will be used to
automatically generate build environment manifests from a definition
of requirements in tests/lcitool/projects/qemu.yml
It will ultimately be capable of generating
- Dockerfiles
- Package lists for installation in VMs
- Variables for configuring Cirrus CI environments
When a new build pre-requisite is needed for QEMU, if this package
is not currently known to libvirt-ci, it must first be added to the
'mappings.yml' file in the above git repo.
Then the submodule can be updated and the build pre-requisite added
to the tests/lcitool/projects/qemu.yml file. Now all the build env
manifests can be re-generated using 'make lcitool-refresh'
This ensures that when a new build pre-requisite is introduced, it
is added to all the different OS containers, VMs and Cirrus CI
environments consistently.
It also facilitates the addition of containers targetting new distros
or updating existing containers to new versions of the same distro,
where packages might have been renamed.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20211215141949.3512719-8-berrange@redhat.com>
Message-Id: <20220105135009.1584676-8-alex.bennee@linaro.org>
This ensures that the file is regenerated properly whenever config-target.h
or config-devices.h files change.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
These files have been removed for more than year in the best
case, or for more than ten years for some really old TCG files.
Remove any traces of it.
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
"meson test" starting with version 0.57 is just as capable and easy to
use as QEMU's own TAP driver. All existing options for "make check"
work. The only required code change involves how to mark "slow" tests;
they need to belong to an additional "slow" suite.
The rules for .tap output are replaced by JUnit XML; GitLab is able
to parse that output and present it in the CI pipeline report.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch fixes actually two issues with 'make cscope'.
Firstly, it fixes the command for MacOS "find" command as MacOS will append the
full path of "$(SRC_PATH)/" before each found entry, then after the final "./"
replacement trick it'll look like (e.g., "qapi/qmp-dispatch.c"):
/qapi/qmp-dispatch.c
Which will point to the root directory instead.
Fix it by simply remove the "/" in "$(SRC_PATH)/" of "find-src-path", then
it'll work for at least both Linux and MacOS.
The other OS-independent issue is to start proactively ignoring soft links when
generating tags, otherwise by default on master branch we'll see this error
when "make cscope":
cscope: cannot find file subprojects/libvhost-user/include/atomic.h
This patch should fix the two issues altogether.
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20210804132328.41353-3-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We should use "-print" or otherwise all "-prone" is ignored.
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20210804132328.41353-2-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Prepare the configure script and Makefile for automatically generated
help and parsing.
Because we need to run the script to generate the full help, we
cannot rely on the user supplying the path to a Python interpreter
with --python; therefore, the introspection output is parsed into
shell functions and stored in scripts/. The converter is written
in Python as standard for QEMU, and this commit contains a stub.
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20211007130829.632254-18-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When searching for options like -n in MAKEFLAGS, current code may result
in a false positive match when make is invoked with long options like
--no-print-directory. This has been observed with certain versions of
host make (e.g. 3.82) while building the Qemu package in buildroot.
Filter out such long options before searching for one-character options.
Signed-off-by: Alexey Neyman <stilor@att.net>
Message-Id: <20210722020846.3678817-1-stilor@att.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The wrapper should not be needed here (it's not the shebang line of
a shell script), and it is causing trouble on Haiku where "env"
resides in a different directory.
Reported-by: Richard Zak <richard.j.zak@gmail.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210705082542.936856-1-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Do not guard each assignment with a check for --with-git-submodules=ignore.
To avoid a confusing "GIT" line from the Makefile, guard the git-submodule-update
recipe so that it is empty when --with-git-submodules=ignore.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We are generating a lot of target-specific defines in the *-config-devices.h
and *-config-target.h files. Using them in common code is wrong and leads
to very subtle bugs since a "#ifdef CONFIG_SOMETHING" is not working there
as expected. To avoid these issues, we are already poisoning many of the
macros in include/exec/poison.h - but it's cumbersome to maintain this
list manually. Thus let's generate an additional list of poisoned macros
automatically from the current config switches - this should give us a
much better test coverage via the different CI configurations.
Note that CONFIG_TCG (which is also defined in config-host.h) and
CONFIG_USER_ONLY are special, so we have to filter these out.
Message-Id: <20210414112004.943383-5-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
After reading the dependency file, ninja just deletes it, in the name
of cleanliness I guess. However this complicates debugging unnecessarily
compared to good old "-include *.d". Use the keepdepfile debugging
option to make it easier to see what is going on.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210215122103.63933-1-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We have a bunch of -help targets so this will save some cognitive
dissonance. Keep the original for those with muscle memory.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210202134001.25738-6-alex.bennee@linaro.org>
Replace the --enable-git-update and --disable-git-update configure params
with the param --with-git-submodules=(update|validate|ignore) to
allow 3 options for building from a git repo.
This is needed because downstream packagers, e.g. Debian, Ubuntu, etc,
also keep the source code in git, but do not want to enable the
'git_update' mode; with the current code, that's not possible even
if the downstream package specifies --disable-git-update.
The previous parameters are deprecated but still available; the
--enable-git-update parameter maps to --with-git-submodules=update and
--disable-git-update parameter maps to --with-git-submodules=validate.
The configure script behavior is slightly modified, where previously
the dtc, capstone, and slirp submodules were not validated when
--disable-git-update was specified (but were updated with git-update
enabled), now they are validated when using --with-git-submodules=validate
and are only ignored when using --with-git-submodules=ignore.
Signed-off-by: Dan Streetman <ddstreet@canonical.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Just use classes introduced in previous three commits. Behavior
difference is described in these three commits.
Drop group file, as it becomes unused.
Drop common.env: now check is in python, and for tests we use same
python interpreter that runs the check itself. Use build environment
PYTHON in check-block instead, to keep "make check" use the same
python.
Checking for virtio-blk moved to iotests.py, as it actually iotests.py
dependency. Actually not all python iotests depend on it, so in future
it may be refactored to checked only when really needed.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210125185056.129513-6-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
GNU Global is another tags engine which is more like cscope in being
able to support finding both references and definitions. You will be
un-surprised to know it also integrates well with Emacs.
The main benefit of integrating it into find-src-path is it takes less
time to rebuild the database from scratch when you have a lot of build
directories under your source tree.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210114165730.31607-3-alex.bennee@linaro.org>
It doesn't bring much to have echoing with "make help". Suppress it
unconditionally.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <160459122012.462591.8467906402712875729.stgit@bahia.lan>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
A misplaced $(quiet-@) meant that "make clean" and "make distclean" did
not work properly.
Reported-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The code base has some C source and header files that don't get indexed
because their name ends with .inc:
$ git ls-files "*.[ch].inc" | wc -l
66
Add them to the list.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <160258069310.900922.1495166540282536628.stgit@bahia.lan>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Use $(findstring) instead of $(filter) to detect -n/-k
as different versions of MAKE fill in $(MAKEFLAGS) differently.
Do not bother running ninja at all if -nq is passed.
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20201026155854.3074290-1-pbonzini@redhat.com>
Since installation is not part of Makefiles anymore, Make need not
know the directories anymore. Meson already knows them through
built-in options, do everything using them instead of the config_host
dictionary.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Richard Henderson