The copy back to siginfo_t should be conditional only on arg3,
not the specific values that might have been written.
The copy back to rusage was missing entirely.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2262
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Alex Fan <alex.fan.q@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Split out the tail of fold_neg to fold_neg_no_const so that we
can avoid attempting to constant fold vector negate.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2150
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Bring a bit more consistency into the naming.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-ID: <20240327102448.61877-4-kraxel@redhat.com>
Turned out hard-coding version and date in the Makefile wasn't a bright
idea. Updating it on edk2 updates is easily forgotten. Fetch the info
from git instead. Store in edk2-version, so this can be committed to
the repo and is present in tarballs too.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-ID: <20240327102448.61877-2-kraxel@redhat.com>
This "hotpluggable" here is misleading. Actually we check is object a
device or not. Let's drop the word.
Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20240329183758.3360733-3-vsementsov@yandex-team.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Let's not care about what was changed and update the whole config,
reasons:
1. config->geometry should be updated together with capacity, so we fix
a bug.
2. Vhost-user protocol doesn't say anything about config change
limitation. Silent ignore of changes doesn't seem to be correct.
3. vhost-user-vsock reads the whole config
4. on realize we don't do any checks on retrieved config, so no reason
to care here
Comment "valid for resize only" exists since introduction the whole
hw/block/vhost-user-blk.c in commit
00343e4b54
"vhost-user-blk: introduce a new vhost-user-blk host device",
seems it was just an extra limitation.
Also, let's notify guest unconditionally:
1. So does vhost-user-vsock
2. We are going to reuse the functionality in new cases when we do want
to notify the guest unconditionally. So, no reason to create extra
branches in the logic.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Acked-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Message-Id: <20240329183758.3360733-2-vsementsov@yandex-team.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The set_config callback function vhost_vdpa_device_get_config in
vdpa-dev does not fetch the current device status from the hardware
device, causing the guest os to not receive the latest device status
information.
The hardware updates the config status of the vdpa device and then
notifies the os. The guest os receives an interrupt notification,
triggering a get_config access in the kernel, which then enters qemu
internally. Ultimately, the vhost_vdpa_device_get_config function of
vdpa-dev is called
One scenario encountered is when the device needs to bring down the
vdpa net device. After modifying the status field of virtio_net_config
in the hardware, it sends an interrupt notification. However, the guest
os always receives the STATUS field as VIRTIO_NET_S_LINK_UP.
Signed-off-by: Yuxue Liu <yuxue.liu@jaguarmicro.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20240408020003.1979-1-yuxue.liu@jaguarmicro.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In the event of writing many chains of descriptors, the device must
write just the id of the last buffer in the descriptor chain, skip
forward the number of descriptors in the chain, and then repeat the
operations for the rest of chains.
Current QEMU code writes all the buffer ids consecutively, and then
skips all the buffers altogether. This is a bug, and can be reproduced
with a VirtIONet device with _F_MRG_RXBUB and without
_F_INDIRECT_DESC:
If a virtio-net device has the VIRTIO_NET_F_MRG_RXBUF feature
but not the VIRTIO_RING_F_INDIRECT_DESC feature,
'VirtIONetQueue->rx_vq' will use the merge feature
to store data in multiple 'elems'.
The 'num_buffers' in the virtio header indicates how many elements are merged.
If the value of 'num_buffers' is greater than 1,
all the merged elements will be filled into the descriptor ring.
The 'idx' of the elements should be the value of 'vq->used_idx' plus 'ndescs'.
Fixes: 86044b24e8 ("virtio: basic packed virtqueue support")
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Wafer <wafer@jaguarmicro.com>
Message-Id: <20240407015451.5228-2-wafer@jaguarmicro.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The current handling of invalid virtqueue elements inside the TX/RX virt
queue handlers is wrong.
They are added in a per-stream invalid queue to be processed after the
handler is done examining each message, but the invalid message might
not be specifying any stream_id; which means it's invalid to add it to
any stream->invalid queue since stream could be NULL at this point.
This commit moves the invalid queue to the VirtIOSound struct which
guarantees there will always be a valid temporary place to store them
inside the tx/rx handlers. The queue will be emptied before the handler
returns, so the queue must be empty at any other point of the device's
lifetime.
Signed-off-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Message-Id: <virtio-snd-rewrite-invalid-tx-rx-message-handling-v1.manos.pitsidianakis@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch improves error handling in virtio_snd_handle_tx_xfer()
and virtio_snd_handle_rx_xfer() in the VirtIO sound driver. Previously,
'goto' statements were used for error paths, leading to unnecessary
processing and potential null pointer dereferences. Now, 'continue' is
used to skip the rest of the current loop iteration for errors such as
message size discrepancies or null streams, reducing crash risks.
ASAN log illustrating the issue addressed:
ERROR: AddressSanitizer: SEGV on unknown address 0x0000000000b4
#0 0x57cea39967b8 in qemu_mutex_lock_impl qemu/util/qemu-thread-posix.c:92:5
#1 0x57cea128c462 in qemu_mutex_lock qemu/include/qemu/thread.h:122:5
#2 0x57cea128d72f in qemu_lockable_lock qemu/include/qemu/lockable.h:95:5
#3 0x57cea128c294 in qemu_lockable_auto_lock qemu/include/qemu/lockable.h:105:5
#4 0x57cea1285eb2 in virtio_snd_handle_rx_xfer qemu/hw/audio/virtio-snd.c:1026:9
#5 0x57cea2caebbc in virtio_queue_notify_vq qemu/hw/virtio/virtio.c:2268:9
#6 0x57cea2cae412 in virtio_queue_host_notifier_read qemu/hw/virtio/virtio.c:3671:9
#7 0x57cea39822f1 in aio_dispatch_handler qemu/util/aio-posix.c:372:9
#8 0x57cea3979385 in aio_dispatch_handlers qemu/util/aio-posix.c:414:20
#9 0x57cea3978eb1 in aio_dispatch qemu/util/aio-posix.c:424:5
#10 0x57cea3a1eede in aio_ctx_dispatch qemu/util/async.c:360:5
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Message-Id: <20240322110827.568412-1-zheyuma97@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This reverts commit cd341fd1ff.
The patch adds non-upstream code in
include/standard-headers/linux/virtio_pci.h
which would make maintainance harder.
Revert for now.
Suggested-by: Jason Wang <jasowang@redhat.com>
Message-Id: <df6b6b465753e754a19459e8cd61416548f89a42.1712569644.git.mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
subj is calling kvm_add_routing_entry() which simply extends
KVMState::irq_routes::entries[]
but doesn't check if number of routes goes beyond limit the kernel
is willing to accept. Which later leads toi the assert
qemu-kvm: ../accel/kvm/kvm-all.c:1833: kvm_irqchip_commit_routes: Assertion `ret == 0' failed
typically it happens during guest boot for large enough guest
Reproduced with:
./qemu --enable-kvm -m 8G -smp 64 -machine pc \
`for b in {1..2}; do echo -n "-device pci-bridge,id=pci$b,chassis_nr=$b ";
for i in {0..31}; do touch /tmp/vblk$b$i;
echo -n "-drive file=/tmp/vblk$b$i,if=none,id=drive$b$i,format=raw
-device virtio-blk-pci,drive=drive$b$i,bus=pci$b ";
done; done`
While crash at boot time is bad, the same might happen at hotplug time
which is unacceptable.
So instead calling kvm_add_routing_entry() unconditionally, check first
that number of routes won't exceed KVM_CAP_IRQ_ROUTING. This way virtio
device insteads killin qemu, will gracefully fail to initialize device
as expected with following warnings on console:
virtio-blk failed to set guest notifier (-28), ensure -accel kvm is set.
virtio_bus_start_ioeventfd: failed. Fallback to userspace (slower).
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-ID: <20240408110956.451558-1-imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
GCC 14 shows -Wshadow=local warnings if an enum conflicts with a local
variable (including a parameter). To avoid this, move the problematic
enum and all of its dependencies after the hundreds of functions that
have a parameter named "instruction".
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Wei/Lei's fix on a rare postcopy race that can hang the channel (since 8.0)
- Avihai's fix on maintainers file, points to the right doc links
-----BEGIN PGP SIGNATURE-----
iIgEABYKADAWIQS5GE3CDMRX2s990ak7X8zN86vXBgUCZhLpJBIccGV0ZXJ4QHJl
ZGhhdC5jb20ACgkQO1/MzfOr1wa87AEAhvXqJyLxYYdlQ5fqp4hVV6O/3N1vNHMu
kT3d9tmM0jsBAJ5KxK176iGDp+ej5MEyYSm1gG7ivj3y3v3wlPnSmJMJ
=T1lk
-----END PGP SIGNATURE-----
Merge tag 'migration-20240407-pull-request' of https://gitlab.com/peterx/qemu into staging
Migration pull for 9.0-rc3
- Wei/Lei's fix on a rare postcopy race that can hang the channel (since 8.0)
- Avihai's fix on maintainers file, points to the right doc links
# -----BEGIN PGP SIGNATURE-----
#
# iIgEABYKADAWIQS5GE3CDMRX2s990ak7X8zN86vXBgUCZhLpJBIccGV0ZXJ4QHJl
# ZGhhdC5jb20ACgkQO1/MzfOr1wa87AEAhvXqJyLxYYdlQ5fqp4hVV6O/3N1vNHMu
# kT3d9tmM0jsBAJ5KxK176iGDp+ej5MEyYSm1gG7ivj3y3v3wlPnSmJMJ
# =T1lk
# -----END PGP SIGNATURE-----
# gpg: Signature made Sun 07 Apr 2024 19:42:44 BST
# gpg: using EDDSA key B9184DC20CC457DACF7DD1A93B5FCCCDF3ABD706
# gpg: issuer "peterx@redhat.com"
# gpg: Good signature from "Peter Xu <xzpeter@gmail.com>" [marginal]
# gpg: aka "Peter Xu <peterx@redhat.com>" [marginal]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: B918 4DC2 0CC4 57DA CF7D D1A9 3B5F CCCD F3AB D706
* tag 'migration-20240407-pull-request' of https://gitlab.com/peterx/qemu:
MAINTAINERS: Adjust migration documentation files
migration/postcopy: ensure preempt channel is ready before loading states
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When we do an AT address translation operation, the page table walk
is supposed to be performed in the context of the EL we're doing the
walk for, so for instance an AT S1E2R walk is done for EL2. In the
pseudocode an EL is passed to AArch64.AT(), which calls
SecurityStateAtEL() to find the security state that we should be
doing the walk with.
In ats_write64() we get this wrong, instead using the current
security space always. This is fine for AT operations performed from
EL1 and EL2, because there the current security state and the
security state for the lower EL are the same. But for AT operations
performed from EL3, the current security state is always either
Secure or Root, whereas we want to use the security state defined by
SCR_EL3.{NS,NSE} for the walk. This affects not just guests using
FEAT_RME but also ones where EL3 is Secure state and the EL3 code
is trying to do an AT for a NonSecure EL2 or EL1.
Use arm_security_space_below_el3() to get the SecuritySpace to
pass to do_ats_write() for all AT operations except the
AT S1E3* operations.
Cc: qemu-stable@nongnu.org
Fixes: e1ee56ec23 ("target/arm: Pass security space rather than flag for AT instructions")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2250
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240405180232.3570066-1-peter.maydell@linaro.org
Qemu wraps its call to ninja in a Makefile. Since ninja, as opposed to
make, utilizes all CPU cores by default, the qemu Makefile translates
the absense of a `-jN` argument into `-j1`. This breaks jobserver
functionality, so update the -jN mangling to take the --jobserver-auth
argument into considerationa too.
Signed-off-by: Martin Hundebøll <martin@geanix.com>
Message-Id: <20240402081738.1051560-1-martin@geanix.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Before loading the guest states, ensure that the preempt channel has been
ready to use, as some of the states (e.g. via virtio_load) might trigger
page faults that will be handled through the preempt channel. So yield to
the main thread in the case that the channel create event hasn't been
dispatched.
Cc: qemu-stable <qemu-stable@nongnu.org>
Fixes: 9358982744 ("migration: Send requested page directly in rp-return thread")
Originally-by: Lei Wang <lei4.wang@intel.com>
Link: https://lore.kernel.org/all/9aa5d1be-7801-40dd-83fd-f7e041ced249@intel.com/T/
Signed-off-by: Lei Wang <lei4.wang@intel.com>
Signed-off-by: Wei Wang <wei.w.wang@intel.com>
Link: https://lore.kernel.org/r/20240405034056.23933-1-wei.w.wang@intel.com
[peterx: add a todo section, add Fixes and copy stable for 8.0+]
Signed-off-by: Peter Xu <peterx@redhat.com>
EL2 accesses to CNTPOFF_EL2 should only ever trap to EL3 if EL3 is
present, as described by the reference manual (for MRS):
/* ... */
elsif PSTATE.EL == EL2 then
if Halted() && HaveEL(EL3) && /*...*/ then
UNDEFINED;
elsif HaveEL(EL3) && SCR_EL3.ECVEn == '0' then
/* ... */
else
X[t, 64] = CNTPOFF_EL2;
However, the existing implementation of gt_cntpoff_access() always
returns CP_ACCESS_TRAP_EL3 for EL2 accesses with SCR_EL3.ECVEn unset. In
pseudo-code terminology, this corresponds to assuming that HaveEL(EL3)
is always true, which is wrong. As a result, QEMU panics in
access_check_cp_reg() when started without EL3 and running EL2 code
accessing the register (e.g. any recent KVM booting a guest).
Therefore, add the HaveEL(EL3) check to gt_cntpoff_access().
Fixes: 2808d3b38a ("target/arm: Implement FEAT_ECV CNTPOFF_EL2 handling")
Signed-off-by: Pierre-Clément Tosi <ptosi@google.com>
Message-id: m3al6amhdkmsiy2f62w72ufth6dzn45xg5cz6xljceyibphnf4@ezmmpwk4tnhl
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCgA8FiEEzGIauY6CIA2RXMnEW8LFb64PMh8FAmYOtvEeHG1hcmsuY2F2
ZS1heWxhbmRAaWxhbmRlLmNvLnVrAAoJEFvCxW+uDzIf+5oIAJtRPiTP5aUmN4nU
s72NBtgARBJ+5hHl0fqFFlCrG9elO28F1vhT9DwwBOLwihZCnfIXf+SCoE+pvqDw
c+AMN/RnDu+1F4LF93W0ZIr305yGDfVlU+S3vKGtB9G4rcLeBDmNlhui2d0Bqx9R
jwX1y57vcPclObE0KL6AVOfSDPYiVEVQSiTr3j4oW8TqAs2bduEZMRh6esb3XMIA
hmj8mhZAszfh1YvX8ufbxtPQsnNuFMM+Fxgxp0pux8QaI0addDHwVNObRUYlTUZ1
o4xCw7TRXXotaHde/OqZApFECs+md3R7rC2wj7s3ae0ynohHHDFfaB5t1f4pm+kA
/6UN/Jc=
=XwaI
-----END PGP SIGNATURE-----
Merge tag 'qemu-sparc-20240404' of https://github.com/mcayland/qemu into staging
qemu-sparc queue
# -----BEGIN PGP SIGNATURE-----
#
# iQFSBAABCgA8FiEEzGIauY6CIA2RXMnEW8LFb64PMh8FAmYOtvEeHG1hcmsuY2F2
# ZS1heWxhbmRAaWxhbmRlLmNvLnVrAAoJEFvCxW+uDzIf+5oIAJtRPiTP5aUmN4nU
# s72NBtgARBJ+5hHl0fqFFlCrG9elO28F1vhT9DwwBOLwihZCnfIXf+SCoE+pvqDw
# c+AMN/RnDu+1F4LF93W0ZIr305yGDfVlU+S3vKGtB9G4rcLeBDmNlhui2d0Bqx9R
# jwX1y57vcPclObE0KL6AVOfSDPYiVEVQSiTr3j4oW8TqAs2bduEZMRh6esb3XMIA
# hmj8mhZAszfh1YvX8ufbxtPQsnNuFMM+Fxgxp0pux8QaI0addDHwVNObRUYlTUZ1
# o4xCw7TRXXotaHde/OqZApFECs+md3R7rC2wj7s3ae0ynohHHDFfaB5t1f4pm+kA
# /6UN/Jc=
# =XwaI
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 04 Apr 2024 15:19:29 BST
# gpg: using RSA key CC621AB98E82200D915CC9C45BC2C56FAE0F321F
# gpg: issuer "mark.cave-ayland@ilande.co.uk"
# gpg: Good signature from "Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>" [full]
# Primary key fingerprint: CC62 1AB9 8E82 200D 915C C9C4 5BC2 C56F AE0F 321F
* tag 'qemu-sparc-20240404' of https://github.com/mcayland/qemu:
esp.c: remove explicit setting of DRQ within ESP state machine
esp.c: ensure esp_pdma_write() always calls esp_fifo_push()
esp.c: update esp_fifo_{push, pop}() to call esp_update_drq()
esp.c: introduce esp_update_drq() and update esp_fifo_{push, pop}_buf() to use it
esp.c: move esp_set_phase() and esp_get_phase() towards the beginning of the file
esp.c: prevent cmdfifo overflow in esp_cdb_ready()
esp.c: rework esp_cdb_length() into esp_cdb_ready()
esp.c: don't assert() if FIFO empty when executing non-DMA SELATNS
esp.c: introduce esp_fifo_push_buf() function for pushing to the FIFO
esp.c: change esp_fifo_pop_buf() to take ESPState
esp.c: use esp_fifo_push() instead of fifo8_push()
esp.c: change esp_fifo_pop() to take ESPState
esp.c: change esp_fifo_push() to take ESPState
esp.c: replace cmdfifo use of esp_fifo_pop() in do_message_phase()
esp.c: replace esp_fifo_pop_buf() with esp_fifo8_pop_buf() in do_message_phase()
esp.c: replace esp_fifo_pop_buf() with esp_fifo8_pop_buf() in do_command_phase()
esp.c: move esp_fifo_pop_buf() internals to new esp_fifo8_pop_buf() function
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Now the esp_update_drq() is called for all reads/writes to the FIFO, there is
no need to manually raise and lower the DRQ signal.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/611
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1831
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20240324191707.623175-18-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
This ensures that esp_update_drq() is called via esp_fifo_push() whenever the
host uses PDMA to transfer data to a SCSI device.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20240324191707.623175-17-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
This ensures that the DRQ line is always set correctly when reading/writing
single bytes to/from the FIFO.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20240324191707.623175-16-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
This new function sets the DRQ line correctly according to the current transfer
mode, direction and FIFO contents. Update esp_fifo_push_buf() and esp_fifo_pop_buf()
to use it so that DRQ is always set correctly when reading/writing multiple bytes
to/from the FIFO.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20240324191707.623175-15-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
This allows these functions to be used earlier in the file without needing a
separate forward declaration.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20240324191707.623175-14-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
During normal use the cmdfifo will never wrap internally and cmdfifo_cdb_offset
will always indicate the start of the SCSI CDB. However it is possible that a
malicious guest could issue an invalid ESP command sequence such that cmdfifo
wraps internally and cmdfifo_cdb_offset could point beyond the end of the FIFO
data buffer.
Add an extra check to fifo8_peek_buf() to ensure that if the cmdfifo has wrapped
internally then esp_cdb_ready() will exit rather than allow scsi_cdb_length() to
access data outside the cmdfifo data buffer.
Reported-by: Chuhong Yuan <hslester96@gmail.com>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20240324191707.623175-13-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
The esp_cdb_length() function is only used as part of a calculation to determine
whether the cmdfifo contains an entire SCSI CDB. Rework esp_cdb_length() into a
new esp_cdb_ready() function which both enables us to handle the case where
scsi_cdb_length() returns -1, plus simplify the logic for its callers.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20240324191707.623175-12-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
The current logic assumes that at least 1 byte is present in the FIFO when
executing a non-DMA SELATNS command, but this may not be the case if the
guest executes an invalid ESP command sequence.
Reported-by: Chuhong Yuan <hslester96@gmail.com>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20240324191707.623175-11-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Instead of pushing data into the FIFO directly with fifo8_push_all(), add a new
esp_fifo_push_buf() function and use it accordingly.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20240324191707.623175-10-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Now that all users of esp_fifo_pop_buf() operate on the main FIFO there is no
need to pass the FIFO explicitly.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20240324191707.623175-9-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
There are still a few places that use fifo8_push() instead of esp_fifo_push() in
order to push a value into the FIFO. Update those places to use esp_fifo_push()
instead.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20240324191707.623175-8-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Now that all users of esp_fifo_pop() operate on the main FIFO there is no need
to pass the FIFO explicitly.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20240324191707.623175-7-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Now that all users of esp_fifo_push() operate on the main FIFO there is no need
to pass the FIFO explicitly.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20240324191707.623175-6-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20240324191707.623175-5-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
The aim is to restrict the esp_fifo_*() functions so that they only operate on
the hardware FIFO. When reading from cmdfifo in do_message_phase() use the
underlying esp_fifo8_pop_buf() function directly.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20240324191707.623175-4-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
The aim is to restrict the esp_fifo_*() functions so that they only operate on
the hardware FIFO. When reading from cmdfifo in do_command_phase() use the
underlying esp_fifo8_pop_buf() function directly.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20240324191707.623175-3-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Update esp_fifo_pop_buf() to be a simple wrapper onto the new esp_fifo8_pop_buf()
function.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20240324191707.623175-2-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
This modification ensures that in scenarios where the buffer size is
insufficient for a zone report, the function will now properly set an
error status and proceed to a cleanup label, instead of merely
returning.
The following ASAN log reveals it:
==1767400==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 312 byte(s) in 1 object(s) allocated from:
#0 0x64ac7b3280cd in malloc llvm/compiler-rt/lib/asan/asan_malloc_linux.cpp:129:3
#1 0x735b02fb9738 in g_malloc (/lib/x86_64-linux-gnu/libglib-2.0.so.0+0x5e738)
#2 0x64ac7d23be96 in virtqueue_split_pop hw/virtio/virtio.c:1612:12
#3 0x64ac7d23728a in virtqueue_pop hw/virtio/virtio.c:1783:16
#4 0x64ac7cfcaacd in virtio_blk_get_request hw/block/virtio-blk.c:228:27
#5 0x64ac7cfca7c7 in virtio_blk_handle_vq hw/block/virtio-blk.c:1123:23
#6 0x64ac7cfecb95 in virtio_blk_handle_output hw/block/virtio-blk.c:1157:5
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Message-id: 20240404120040.1951466-1-zheyuma97@gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
If no bytes are there to process in the message in phase,
the input data latch (s->sidl) is set to s->msg[-1]. Just
do nothing since no DMA is performed.
Reported-by: Chuhong Yuan <hslester96@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Horizontal pel panning bit 3 is only used in text mode. In graphics
mode, it can be treated as if it was zero, thus not extending the
dirty memory region.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Richard Henderson