mirror_qemu/hw/net/igb_regs.h

686 lines
28 KiB
C
Raw Blame History

This file contains ambiguous Unicode characters!

This file contains ambiguous Unicode characters that may be confused with others in your current locale. If your use case is intentional and legitimate, you can safely ignore this warning. Use the Escape button to highlight these characters.

/* SPDX-License-Identifier: GPL-2.0 */
/*
* This is copied + edited from kernel header files in
* drivers/net/ethernet/intel/igb
*/
#ifndef HW_IGB_REGS_H_
#define HW_IGB_REGS_H_
#include "e1000x_regs.h"
/* from igb/e1000_hw.h */
#define E1000_DEV_ID_82576 0x10C9
#define E1000_DEV_ID_82576_FIBER 0x10E6
#define E1000_DEV_ID_82576_SERDES 0x10E7
#define E1000_DEV_ID_82576_QUAD_COPPER 0x10E8
#define E1000_DEV_ID_82576_QUAD_COPPER_ET2 0x1526
#define E1000_DEV_ID_82576_NS 0x150A
#define E1000_DEV_ID_82576_NS_SERDES 0x1518
#define E1000_DEV_ID_82576_SERDES_QUAD 0x150D
/* Context Descriptor */
struct e1000_adv_tx_context_desc {
uint32_t vlan_macip_lens;
uint32_t seqnum_seed;
uint32_t type_tucmd_mlhl;
uint32_t mss_l4len_idx;
};
/* Advanced Transmit Descriptor */
union e1000_adv_tx_desc {
struct {
uint64_t buffer_addr; /* Address of descriptor's data buffer */
uint32_t cmd_type_len;
uint32_t olinfo_status;
} read;
struct {
uint64_t rsvd; /* Reserved */
uint32_t nxtseq_seed;
uint32_t status;
} wb;
};
#define E1000_ADVTXD_POTS_IXSM 0x00000100 /* Insert TCP/UDP Checksum */
#define E1000_ADVTXD_POTS_TXSM 0x00000200 /* Insert TCP/UDP Checksum */
#define E1000_TXD_POPTS_IXSM 0x00000001 /* Insert IP checksum */
#define E1000_TXD_POPTS_TXSM 0x00000002 /* Insert TCP/UDP checksum */
/* Receive Descriptor - Advanced */
union e1000_adv_rx_desc {
struct {
uint64_t pkt_addr; /* Packet Buffer Address */
uint64_t hdr_addr; /* Header Buffer Address */
} read;
struct {
struct {
struct {
uint16_t pkt_info; /* RSS Type, Packet Type */
uint16_t hdr_info; /* Split Head, Buffer Length */
} lo_dword;
union {
uint32_t rss; /* RSS Hash */
struct {
uint16_t ip_id; /* IP Id */
uint16_t csum; /* Packet Checksum */
} csum_ip;
} hi_dword;
} lower;
struct {
uint32_t status_error; /* Ext Status/Error */
uint16_t length; /* Packet Length */
uint16_t vlan; /* VLAN tag */
} upper;
} wb; /* writeback */
};
/* from igb/e1000_phy.h */
/* IGP01E1000 Specific Registers */
#define IGP01E1000_PHY_PORT_CONFIG 0x10 /* Port Config */
#define IGP01E1000_PHY_PORT_STATUS 0x11 /* Status */
#define IGP01E1000_PHY_PORT_CTRL 0x12 /* Control */
#define IGP01E1000_PHY_LINK_HEALTH 0x13 /* PHY Link Health */
#define IGP02E1000_PHY_POWER_MGMT 0x19 /* Power Management */
#define IGP01E1000_PHY_PAGE_SELECT 0x1F /* Page Select */
#define IGP01E1000_PHY_PCS_INIT_REG 0x00B4
#define IGP01E1000_PHY_POLARITY_MASK 0x0078
#define IGP01E1000_PSCR_AUTO_MDIX 0x1000
#define IGP01E1000_PSCR_FORCE_MDI_MDIX 0x2000 /* 0=MDI, 1=MDIX */
#define IGP01E1000_PSCFR_SMART_SPEED 0x0080
/* Enable flexible speed on link-up */
#define IGP02E1000_PM_D0_LPLU 0x0002 /* For D0a states */
#define IGP02E1000_PM_D3_LPLU 0x0004 /* For all other states */
#define IGP01E1000_PLHR_SS_DOWNGRADE 0x8000
#define IGP01E1000_PSSR_POLARITY_REVERSED 0x0002
#define IGP01E1000_PSSR_MDIX 0x0800
#define IGP01E1000_PSSR_SPEED_MASK 0xC000
#define IGP01E1000_PSSR_SPEED_1000MBPS 0xC000
#define IGP02E1000_PHY_CHANNEL_NUM 4
#define IGP02E1000_PHY_AGC_A 0x11B1
#define IGP02E1000_PHY_AGC_B 0x12B1
#define IGP02E1000_PHY_AGC_C 0x14B1
#define IGP02E1000_PHY_AGC_D 0x18B1
#define IGP02E1000_AGC_LENGTH_SHIFT 9 /* Course - 15:13, Fine - 12:9 */
#define IGP02E1000_AGC_LENGTH_MASK 0x7F
#define IGP02E1000_AGC_RANGE 15
/* from igb/igb.h */
#define E1000_PCS_CFG_IGN_SD 1
/* Interrupt defines */
#define IGB_START_ITR 648 /* ~6000 ints/sec */
#define IGB_4K_ITR 980
#define IGB_20K_ITR 196
#define IGB_70K_ITR 56
/* TX/RX descriptor defines */
#define IGB_DEFAULT_TXD 256
#define IGB_DEFAULT_TX_WORK 128
#define IGB_MIN_TXD 80
#define IGB_MAX_TXD 4096
#define IGB_DEFAULT_RXD 256
#define IGB_MIN_RXD 80
#define IGB_MAX_RXD 4096
#define IGB_DEFAULT_ITR 3 /* dynamic */
#define IGB_MAX_ITR_USECS 10000
#define IGB_MIN_ITR_USECS 10
#define NON_Q_VECTORS 1
#define MAX_Q_VECTORS 8
#define MAX_MSIX_ENTRIES 10
/* Transmit and receive queues */
#define IGB_MAX_RX_QUEUES 8
#define IGB_MAX_RX_QUEUES_82575 4
#define IGB_MAX_RX_QUEUES_I211 2
#define IGB_MAX_TX_QUEUES 8
#define IGB_MAX_VF_MC_ENTRIES 30
#define IGB_MAX_VF_FUNCTIONS 8
#define IGB_MAX_VFTA_ENTRIES 128
#define IGB_82576_VF_DEV_ID 0x10CA
#define IGB_I350_VF_DEV_ID 0x1520
/* VLAN info */
#define IGB_TX_FLAGS_VLAN_MASK 0xffff0000
#define IGB_TX_FLAGS_VLAN_SHIFT 16
/* from igb/e1000_82575.h */
#define E1000_MRQC_ENABLE_RSS_MQ 0x00000002
#define E1000_MRQC_ENABLE_VMDQ 0x00000003
#define E1000_MRQC_RSS_FIELD_IPV4_UDP 0x00400000
#define E1000_MRQC_ENABLE_VMDQ_RSS_MQ 0x00000005
#define E1000_MRQC_RSS_FIELD_IPV6_UDP 0x00800000
#define E1000_MRQC_RSS_FIELD_IPV6_UDP_EX 0x01000000
/* Adv Transmit Descriptor Config Masks */
#define E1000_ADVTXD_MAC_TSTAMP 0x00080000 /* IEEE1588 Timestamp packet */
#define E1000_ADVTXD_DTYP_CTXT 0x00200000 /* Advanced Context Descriptor */
#define E1000_ADVTXD_DTYP_DATA 0x00300000 /* Advanced Data Descriptor */
#define E1000_ADVTXD_DCMD_EOP 0x01000000 /* End of Packet */
#define E1000_ADVTXD_DCMD_IFCS 0x02000000 /* Insert FCS (Ethernet CRC) */
#define E1000_ADVTXD_DCMD_RS 0x08000000 /* Report Status */
#define E1000_ADVTXD_DCMD_DEXT 0x20000000 /* Descriptor extension (1=Adv) */
#define E1000_ADVTXD_DCMD_VLE 0x40000000 /* VLAN pkt enable */
#define E1000_ADVTXD_DCMD_TSE 0x80000000 /* TCP Seg enable */
#define E1000_ADVTXD_PAYLEN_SHIFT 14 /* Adv desc PAYLEN shift */
#define E1000_ADVTXD_MACLEN_SHIFT 9 /* Adv ctxt desc mac len shift */
#define E1000_ADVTXD_TUCMD_L4T_UDP 0x00000000 /* L4 Packet TYPE of UDP */
#define E1000_ADVTXD_TUCMD_IPV4 0x00000400 /* IP Packet Type: 1=IPv4 */
#define E1000_ADVTXD_TUCMD_L4T_TCP 0x00000800 /* L4 Packet TYPE of TCP */
#define E1000_ADVTXD_TUCMD_L4T_SCTP 0x00001000 /* L4 packet TYPE of SCTP */
/* IPSec Encrypt Enable for ESP */
#define E1000_ADVTXD_L4LEN_SHIFT 8 /* Adv ctxt L4LEN shift */
#define E1000_ADVTXD_MSS_SHIFT 16 /* Adv ctxt MSS shift */
/* Adv ctxt IPSec SA IDX mask */
/* Adv ctxt IPSec ESP len mask */
/* Additional Transmit Descriptor Control definitions */
#define E1000_TXDCTL_QUEUE_ENABLE 0x02000000 /* Enable specific Tx Queue */
/* Additional Receive Descriptor Control definitions */
#define E1000_RXDCTL_QUEUE_ENABLE 0x02000000 /* Enable specific Rx Queue */
/* Direct Cache Access (DCA) definitions */
#define E1000_DCA_CTRL_DCA_MODE_DISABLE 0x01 /* DCA Disable */
#define E1000_DCA_CTRL_DCA_MODE_CB2 0x02 /* DCA Mode CB2 */
#define E1000_DCA_RXCTRL_CPUID_MASK 0x0000001F /* Rx CPUID Mask */
#define E1000_DCA_RXCTRL_DESC_DCA_EN BIT(5) /* DCA Rx Desc enable */
#define E1000_DCA_RXCTRL_HEAD_DCA_EN BIT(6) /* DCA Rx Desc header enable */
#define E1000_DCA_RXCTRL_DATA_DCA_EN BIT(7) /* DCA Rx Desc payload enable */
#define E1000_DCA_RXCTRL_DESC_RRO_EN BIT(9) /* DCA Rx rd Desc Relax Order */
#define E1000_DCA_TXCTRL_CPUID_MASK 0x0000001F /* Tx CPUID Mask */
#define E1000_DCA_TXCTRL_DESC_DCA_EN BIT(5) /* DCA Tx Desc enable */
#define E1000_DCA_TXCTRL_DESC_RRO_EN BIT(9) /* Tx rd Desc Relax Order */
#define E1000_DCA_TXCTRL_TX_WB_RO_EN BIT(11) /* Tx Desc writeback RO bit */
#define E1000_DCA_TXCTRL_DATA_RRO_EN BIT(13) /* Tx rd data Relax Order */
/* Additional DCA related definitions, note change in position of CPUID */
#define E1000_DCA_TXCTRL_CPUID_MASK_82576 0xFF000000 /* Tx CPUID Mask */
#define E1000_DCA_RXCTRL_CPUID_MASK_82576 0xFF000000 /* Rx CPUID Mask */
#define E1000_DCA_TXCTRL_CPUID_SHIFT 24 /* Tx CPUID now in the last byte */
#define E1000_DCA_RXCTRL_CPUID_SHIFT 24 /* Rx CPUID now in the last byte */
#define E1000_DTXSWC_MAC_SPOOF_MASK 0x000000FF /* Per VF MAC spoof control */
#define E1000_DTXSWC_VLAN_SPOOF_MASK 0x0000FF00 /* Per VF VLAN spoof control */
#define E1000_DTXSWC_LLE_MASK 0x00FF0000 /* Per VF Local LB enables */
#define E1000_DTXSWC_VLAN_SPOOF_SHIFT 8
#define E1000_DTXSWC_VMDQ_LOOPBACK_EN BIT(31) /* global VF LB enable */
/* Easy defines for setting default pool, would normally be left a zero */
#define E1000_VT_CTL_DEFAULT_POOL_SHIFT 7
#define E1000_VT_CTL_DEFAULT_POOL_MASK (0x7 << E1000_VT_CTL_DEFAULT_POOL_SHIFT)
/* Other useful VMD_CTL register defines */
#define E1000_VT_CTL_IGNORE_MAC BIT(28)
#define E1000_VT_CTL_DISABLE_DEF_POOL BIT(29)
#define E1000_VT_CTL_VM_REPL_EN BIT(30)
/* Per VM Offload register setup */
#define E1000_VMOLR_RLPML_MASK 0x00003FFF /* Long Packet Maximum Length mask */
#define E1000_VMOLR_LPE 0x00010000 /* Accept Long packet */
#define E1000_VMOLR_RSSE 0x00020000 /* Enable RSS */
#define E1000_VMOLR_AUPE 0x01000000 /* Accept untagged packets */
#define E1000_VMOLR_ROMPE 0x02000000 /* Accept overflow multicast */
#define E1000_VMOLR_ROPE 0x04000000 /* Accept overflow unicast */
#define E1000_VMOLR_BAM 0x08000000 /* Accept Broadcast packets */
#define E1000_VMOLR_MPME 0x10000000 /* Multicast promiscuous mode */
#define E1000_VMOLR_STRVLAN 0x40000000 /* Vlan stripping enable */
#define E1000_VMOLR_STRCRC 0x80000000 /* CRC stripping enable */
#define E1000_DVMOLR_HIDEVLAN 0x20000000 /* Hide vlan enable */
#define E1000_DVMOLR_STRVLAN 0x40000000 /* Vlan stripping enable */
#define E1000_DVMOLR_STRCRC 0x80000000 /* CRC stripping enable */
#define E1000_VLVF_ARRAY_SIZE 32
#define E1000_VLVF_VLANID_MASK 0x00000FFF
#define E1000_VLVF_POOLSEL_SHIFT 12
#define E1000_VLVF_POOLSEL_MASK (0xFF << E1000_VLVF_POOLSEL_SHIFT)
#define E1000_VLVF_LVLAN 0x00100000
#define E1000_VLVF_VLANID_ENABLE 0x80000000
#define E1000_VMVIR_VLANA_DEFAULT 0x40000000 /* Always use default VLAN */
#define E1000_VMVIR_VLANA_NEVER 0x80000000 /* Never insert VLAN tag */
#define E1000_IOVCTL 0x05BBC
#define E1000_IOVCTL_REUSE_VFQ 0x00000001
#define E1000_RPLOLR_STRVLAN 0x40000000
#define E1000_RPLOLR_STRCRC 0x80000000
#define E1000_DTXCTL_8023LL 0x0004
#define E1000_DTXCTL_VLAN_ADDED 0x0008
#define E1000_DTXCTL_OOS_ENABLE 0x0010
#define E1000_DTXCTL_MDP_EN 0x0020
#define E1000_DTXCTL_SPOOF_INT 0x0040
/* from igb/e1000_defines.h */
/* Physical Func Reset Done Indication */
#define E1000_CTRL_EXT_PFRSTD 0x00004000
#define E1000_IVAR_VALID 0x80
#define E1000_GPIE_NSICR 0x00000001
#define E1000_GPIE_MSIX_MODE 0x00000010
#define E1000_GPIE_EIAME 0x40000000
#define E1000_GPIE_PBA 0x80000000
/* Transmit Control */
#define E1000_TCTL_EN 0x00000002 /* enable tx */
#define E1000_TCTL_PSP 0x00000008 /* pad short packets */
#define E1000_TCTL_CT 0x00000ff0 /* collision threshold */
#define E1000_TCTL_COLD 0x003ff000 /* collision distance */
#define E1000_TCTL_RTLC 0x01000000 /* Re-transmit on late collision */
/* Collision related configuration parameters */
#define E1000_COLLISION_THRESHOLD 15
#define E1000_CT_SHIFT 4
#define E1000_COLLISION_DISTANCE 63
#define E1000_COLD_SHIFT 12
#define E1000_RAH_POOL_MASK 0x03FC0000
#define E1000_RAH_POOL_1 0x00040000
#define E1000_ICR_VMMB 0x00000100 /* VM MB event */
#define E1000_ICR_TS 0x00080000 /* Time Sync Interrupt */
#define E1000_ICR_DRSTA 0x40000000 /* Device Reset Asserted */
/* If this bit asserted, the driver should claim the interrupt */
#define E1000_ICR_INT_ASSERTED 0x80000000
/* LAN connected device generates an interrupt */
#define E1000_ICR_DOUTSYNC 0x10000000 /* NIC DMA out of sync */
/* Extended Interrupt Cause Read */
#define E1000_EICR_RX_QUEUE0 0x00000001 /* Rx Queue 0 Interrupt */
#define E1000_EICR_RX_QUEUE1 0x00000002 /* Rx Queue 1 Interrupt */
#define E1000_EICR_RX_QUEUE2 0x00000004 /* Rx Queue 2 Interrupt */
#define E1000_EICR_RX_QUEUE3 0x00000008 /* Rx Queue 3 Interrupt */
#define E1000_EICR_TX_QUEUE0 0x00000100 /* Tx Queue 0 Interrupt */
#define E1000_EICR_TX_QUEUE1 0x00000200 /* Tx Queue 1 Interrupt */
#define E1000_EICR_TX_QUEUE2 0x00000400 /* Tx Queue 2 Interrupt */
#define E1000_EICR_TX_QUEUE3 0x00000800 /* Tx Queue 3 Interrupt */
#define E1000_EICR_OTHER 0x80000000 /* Interrupt Cause Active */
/* Extended Interrupt Cause Set */
/* E1000_EITR_CNT_IGNR is only for 82576 and newer */
#define E1000_EITR_CNT_IGNR 0x80000000 /* Don't reset counters on write */
/* PCI Express Control */
#define E1000_GCR_CMPL_TMOUT_MASK 0x0000F000
#define E1000_GCR_CMPL_TMOUT_10ms 0x00001000
#define E1000_GCR_CMPL_TMOUT_RESEND 0x00010000
#define E1000_GCR_CAP_VER2 0x00040000
#define PHY_REVISION_MASK 0xFFFFFFF0
#define MAX_PHY_REG_ADDRESS 0x1F /* 5 bit address bus (0-0x1F) */
#define MAX_PHY_MULTI_PAGE_REG 0xF
#define IGP03E1000_E_PHY_ID 0x02A80390
/* from igb/e1000_mbox.h */
#define E1000_P2VMAILBOX_STS 0x00000001 /* Initiate message send to VF */
#define E1000_P2VMAILBOX_ACK 0x00000002 /* Ack message recv'd from VF */
#define E1000_P2VMAILBOX_VFU 0x00000004 /* VF owns the mailbox buffer */
#define E1000_P2VMAILBOX_PFU 0x00000008 /* PF owns the mailbox buffer */
#define E1000_P2VMAILBOX_RVFU 0x00000010 /* Reset VFU - used when VF stuck */
#define E1000_MBVFICR_VFREQ_MASK 0x000000FF /* bits for VF messages */
#define E1000_MBVFICR_VFREQ_VF1 0x00000001 /* bit for VF 1 message */
#define E1000_MBVFICR_VFACK_MASK 0x00FF0000 /* bits for VF acks */
#define E1000_MBVFICR_VFACK_VF1 0x00010000 /* bit for VF 1 ack */
#define E1000_V2PMAILBOX_SIZE 16 /* 16 32 bit words - 64 bytes */
/*
* If it's a E1000_VF_* msg then it originates in the VF and is sent to the
* PF. The reverse is true if it is E1000_PF_*.
* Message ACK's are the value or'd with 0xF0000000
*/
/* Messages below or'd with this are the ACK */
#define E1000_VT_MSGTYPE_ACK 0x80000000
/* Messages below or'd with this are the NACK */
#define E1000_VT_MSGTYPE_NACK 0x40000000
/* Indicates that VF is still clear to send requests */
#define E1000_VT_MSGTYPE_CTS 0x20000000
#define E1000_VT_MSGINFO_SHIFT 16
/* bits 23:16 are used for exra info for certain messages */
#define E1000_VT_MSGINFO_MASK (0xFF << E1000_VT_MSGINFO_SHIFT)
#define E1000_VF_RESET 0x01 /* VF requests reset */
#define E1000_VF_SET_MAC_ADDR 0x02 /* VF requests to set MAC addr */
/* VF requests to clear all unicast MAC filters */
#define E1000_VF_MAC_FILTER_CLR (0x01 << E1000_VT_MSGINFO_SHIFT)
/* VF requests to add unicast MAC filter */
#define E1000_VF_MAC_FILTER_ADD (0x02 << E1000_VT_MSGINFO_SHIFT)
#define E1000_VF_SET_MULTICAST 0x03 /* VF requests to set MC addr */
#define E1000_VF_SET_VLAN 0x04 /* VF requests to set VLAN */
#define E1000_VF_SET_LPE 0x05 /* VF requests to set VMOLR.LPE */
#define E1000_VF_SET_PROMISC 0x06 /*VF requests to clear VMOLR.ROPE/MPME*/
#define E1000_VF_SET_PROMISC_MULTICAST (0x02 << E1000_VT_MSGINFO_SHIFT)
#define E1000_PF_CONTROL_MSG 0x0100 /* PF control message */
/* from igb/e1000_regs.h */
#define E1000_EICR 0x01580 /* Ext. Interrupt Cause Read - R/clr */
#define E1000_EITR(_n) (0x01680 + (0x4 * (_n)))
#define E1000_EICS 0x01520 /* Ext. Interrupt Cause Set - W0 */
#define E1000_EIMS 0x01524 /* Ext. Interrupt Mask Set/Read - RW */
#define E1000_EIMC 0x01528 /* Ext. Interrupt Mask Clear - WO */
#define E1000_EIAC 0x0152C /* Ext. Interrupt Auto Clear - RW */
#define E1000_EIAM 0x01530 /* Ext. Interrupt Ack Auto Clear Mask - RW */
#define E1000_GPIE 0x01514 /* General Purpose Interrupt Enable; RW */
#define E1000_IVAR0 0x01700 /* Interrupt Vector Allocation Register - RW */
#define E1000_IVAR_MISC 0x01740 /* Interrupt Vector Allocation Register (last) - RW */
#define E1000_FRTIMER 0x01048 /* Free Running Timer - RW */
#define E1000_FCRTV 0x02460 /* Flow Control Refresh Timer Value - RW */
#define E1000_RQDPC(_n) (0x0C030 + ((_n) * 0x40))
#define E1000_RXPBS 0x02404 /* Rx Packet Buffer Size - RW */
#define E1000_TXPBS 0x03404 /* Tx Packet Buffer Size - RW */
#define E1000_DTXCTL 0x03590 /* DMA TX Control - RW */
#define E1000_HTCBDPC 0x04124 /* Host TX Circuit Breaker Dropped Count */
#define E1000_RLPML 0x05004 /* RX Long Packet Max Length */
#define E1000_RA2 0x054E0 /* 2nd half of Rx address array - RW Array */
#define E1000_PSRTYPE(_i) (0x05480 + ((_i) * 4))
#define E1000_VT_CTL 0x0581C /* VMDq Control - RW */
/* VT Registers */
#define E1000_MBVFICR 0x00C80 /* Mailbox VF Cause - RWC */
#define E1000_MBVFIMR 0x00C84 /* Mailbox VF int Mask - RW */
#define E1000_VFLRE 0x00C88 /* VF Register Events - RWC */
#define E1000_VFRE 0x00C8C /* VF Receive Enables */
#define E1000_VFTE 0x00C90 /* VF Transmit Enables */
#define E1000_QDE 0x02408 /* Queue Drop Enable - RW */
#define E1000_DTXSWC 0x03500 /* DMA Tx Switch Control - RW */
#define E1000_WVBR 0x03554 /* VM Wrong Behavior - RWS */
#define E1000_RPLOLR 0x05AF0 /* Replication Offload - RW */
#define E1000_UTA 0x0A000 /* Unicast Table Array - RW */
#define E1000_IOVTCL 0x05BBC /* IOV Control Register */
#define E1000_TXSWC 0x05ACC /* Tx Switch Control */
#define E1000_LVMMC 0x03548 /* Last VM Misbehavior cause */
/* These act per VF so an array friendly macro is used */
#define E1000_P2VMAILBOX(_n) (0x00C00 + (4 * (_n)))
#define E1000_VMBMEM(_n) (0x00800 + (64 * (_n)))
#define E1000_VMOLR(_n) (0x05AD0 + (4 * (_n)))
#define E1000_DVMOLR(_n) (0x0C038 + (64 * (_n)))
#define E1000_VLVF(_n) (0x05D00 + (4 * (_n))) /* VLAN VM Filter */
#define E1000_VMVIR(_n) (0x03700 + (4 * (_n)))
/* from igbvf/defines.h */
/* SRRCTL bit definitions */
#define E1000_SRRCTL_BSIZEPKT_SHIFT 10 /* Shift _right_ */
#define E1000_SRRCTL_BSIZEHDRSIZE_MASK 0x00000F00
#define E1000_SRRCTL_BSIZEHDRSIZE_SHIFT 2 /* Shift _left_ */
#define E1000_SRRCTL_DESCTYPE_ADV_ONEBUF 0x02000000
#define E1000_SRRCTL_DESCTYPE_HDR_SPLIT_ALWAYS 0x0A000000
#define E1000_SRRCTL_DESCTYPE_MASK 0x0E000000
#define E1000_SRRCTL_DROP_EN 0x80000000
#define E1000_SRRCTL_BSIZEPKT_MASK 0x0000007F
#define E1000_SRRCTL_BSIZEHDR_MASK 0x00003F00
/* from igbvf/mbox.h */
#define E1000_V2PMAILBOX_REQ 0x00000001 /* Request for PF Ready bit */
#define E1000_V2PMAILBOX_ACK 0x00000002 /* Ack PF message received */
#define E1000_V2PMAILBOX_VFU 0x00000004 /* VF owns the mailbox buffer */
#define E1000_V2PMAILBOX_PFU 0x00000008 /* PF owns the mailbox buffer */
#define E1000_V2PMAILBOX_PFSTS 0x00000010 /* PF wrote a message in the MB */
#define E1000_V2PMAILBOX_PFACK 0x00000020 /* PF ack the previous VF msg */
#define E1000_V2PMAILBOX_RSTI 0x00000040 /* PF has reset indication */
#define E1000_V2PMAILBOX_RSTD 0x00000080 /* PF has indicated reset done */
#define E1000_V2PMAILBOX_R2C_BITS 0x000000B0 /* All read to clear bits */
#define E1000_VFMAILBOX_SIZE 16 /* 16 32 bit words - 64 bytes */
/*
* If it's a E1000_VF_* msg then it originates in the VF and is sent to the
* PF. The reverse is true if it is E1000_PF_*.
* Message ACK's are the value or'd with 0xF0000000
*/
/* Messages below or'd with this are the ACK */
#define E1000_VT_MSGTYPE_ACK 0x80000000
/* Messages below or'd with this are the NACK */
#define E1000_VT_MSGTYPE_NACK 0x40000000
/* Indicates that VF is still clear to send requests */
#define E1000_VT_MSGTYPE_CTS 0x20000000
/* We have a total wait time of 1s for vf mailbox posted messages */
#define E1000_VF_MBX_INIT_TIMEOUT 2000 /* retry count for mbx timeout */
#define E1000_VF_MBX_INIT_DELAY 500 /* usec delay between retries */
#define E1000_VT_MSGINFO_SHIFT 16
/* bits 23:16 are used for exra info for certain messages */
#define E1000_VT_MSGINFO_MASK (0xFF << E1000_VT_MSGINFO_SHIFT)
#define E1000_VF_RESET 0x01 /* VF requests reset */
#define E1000_VF_SET_MAC_ADDR 0x02 /* VF requests PF to set MAC addr */
/* VF requests PF to clear all unicast MAC filters */
#define E1000_VF_MAC_FILTER_CLR (0x01 << E1000_VT_MSGINFO_SHIFT)
/* VF requests PF to add unicast MAC filter */
#define E1000_VF_MAC_FILTER_ADD (0x02 << E1000_VT_MSGINFO_SHIFT)
#define E1000_VF_SET_MULTICAST 0x03 /* VF requests PF to set MC addr */
#define E1000_VF_SET_VLAN 0x04 /* VF requests PF to set VLAN */
#define E1000_VF_SET_LPE 0x05 /* VF requests PF to set VMOLR.LPE */
#define E1000_PF_CONTROL_MSG 0x0100 /* PF control message */
/* from igbvf/regs.h */
/* Statistics registers */
#define E1000_VFGPRC 0x00F10
#define E1000_VFGORC 0x00F18
#define E1000_VFMPRC 0x00F3C
#define E1000_VFGPTC 0x00F14
#define E1000_VFGOTC 0x00F34
#define E1000_VFGOTLBC 0x00F50
#define E1000_VFGPTLBC 0x00F44
#define E1000_VFGORLBC 0x00F48
#define E1000_VFGPRLBC 0x00F40
/* These act per VF so an array friendly macro is used */
#define E1000_V2PMAILBOX(_n) (0x00C40 + (4 * (_n)))
#define E1000_VMBMEM(_n) (0x00800 + (64 * (_n)))
/* from igbvf/vf.h */
#define E1000_DEV_ID_82576_VF 0x10CA
/* new */
/* Receive Registers */
/* RX Descriptor Base Low; RW */
#define E1000_RDBAL(_n) (0x0C000 + (0x40 * (_n)))
#define E1000_RDBAL_A(_n) (0x02800 + (0x100 * (_n)))
/* RX Descriptor Base High; RW */
#define E1000_RDBAH(_n) (0x0C004 + (0x40 * (_n)))
#define E1000_RDBAH_A(_n) (0x02804 + (0x100 * (_n)))
/* RX Descriptor Ring Length; RW */
#define E1000_RDLEN(_n) (0x0C008 + (0x40 * (_n)))
#define E1000_RDLEN_A(_n) (0x02808 + (0x100 * (_n)))
/* Split and Replication Receive Control; RW */
#define E1000_SRRCTL(_n) (0x0C00C + (0x40 * (_n)))
#define E1000_SRRCTL_A(_n) (0x0280C + (0x100 * (_n)))
/* RX Descriptor Head; RW */
#define E1000_RDH(_n) (0x0C010 + (0x40 * (_n)))
#define E1000_RDH_A(_n) (0x02810 + (0x100 * (_n)))
/* RX DCA Control; RW */
#define E1000_RXCTL(_n) (0x0C014 + (0x40 * (_n)))
#define E1000_RXCTL_A(_n) (0x02814 + (0x100 * (_n)))
/* RX Descriptor Tail; RW */
#define E1000_RDT(_n) (0x0C018 + (0x40 * (_n)))
#define E1000_RDT_A(_n) (0x02818 + (0x100 * (_n)))
/* RX Descriptor Control; RW */
#define E1000_RXDCTL(_n) (0x0C028 + (0x40 * (_n)))
#define E1000_RXDCTL_A(_n) (0x02828 + (0x100 * (_n)))
/* RX Queue Drop Packet Count; RC */
#define E1000_RQDPC_A(_n) (0x02830 + (0x100 * (_n)))
/* Transmit Registers */
/* TX Descriptor Base Low; RW */
#define E1000_TDBAL(_n) (0x0E000 + (0x40 * (_n)))
#define E1000_TDBAL_A(_n) (0x03800 + (0x100 * (_n)))
/* TX Descriptor Base High; RW */
#define E1000_TDBAH(_n) (0x0E004 + (0x40 * (_n)))
#define E1000_TDBAH_A(_n) (0x03804 + (0x100 * (_n)))
/* TX Descriptor Ring Length; RW */
#define E1000_TDLEN(_n) (0x0E008 + (0x40 * (_n)))
#define E1000_TDLEN_A(_n) (0x03808 + (0x100 * (_n)))
/* TX Descriptor Head; RW */
#define E1000_TDH(_n) (0x0E010 + (0x40 * (_n)))
#define E1000_TDH_A(_n) (0x03810 + (0x100 * (_n)))
/* TX DCA Control; RW */
#define E1000_TXCTL(_n) (0x0E014 + (0x40 * (_n)))
#define E1000_TXCTL_A(_n) (0x03814 + (0x100 * (_n)))
/* TX Descriptor Tail; RW */
#define E1000_TDT(_n) (0x0E018 + (0x40 * (_n)))
#define E1000_TDT_A(_n) (0x03818 + (0x100 * (_n)))
/* TX Descriptor Control; RW */
#define E1000_TXDCTL(_n) (0x0E028 + (0x40 * (_n)))
#define E1000_TXDCTL_A(_n) (0x03828 + (0x100 * (_n)))
/* TX Descriptor Completion WriteBack Address Low; RW */
#define E1000_TDWBAL(_n) (0x0E038 + (0x40 * (_n)))
#define E1000_TDWBAL_A(_n) (0x03838 + (0x100 * (_n)))
/* TX Descriptor Completion WriteBack Address High; RW */
#define E1000_TDWBAH(_n) (0x0E03C + (0x40 * (_n)))
#define E1000_TDWBAH_A(_n) (0x0383C + (0x100 * (_n)))
#define E1000_MTA_A 0x0200
#define E1000_XDBAL_MASK (~(BIT(5) - 1)) /* TDBAL and RDBAL Registers Mask */
#define E1000_ICR_MACSEC 0x00000020 /* MACSec */
#define E1000_ICR_RX0 0x00000040 /* Receiver Overrun */
#define E1000_ICR_GPI_SDP0 0x00000800 /* General Purpose, SDP0 pin */
#define E1000_ICR_GPI_SDP1 0x00001000 /* General Purpose, SDP1 pin */
#define E1000_ICR_GPI_SDP2 0x00002000 /* General Purpose, SDP2 pin */
#define E1000_ICR_GPI_SDP3 0x00004000 /* General Purpose, SDP3 pin */
#define E1000_ICR_PTRAP 0x00008000 /* Probe Trap */
#define E1000_ICR_MNG 0x00040000 /* Management Event */
#define E1000_ICR_OMED 0x00100000 /* Other Media Energy Detected */
#define E1000_ICR_FER 0x00400000 /* Fatal Error */
#define E1000_ICR_NFER 0x00800000 /* Non Fatal Error */
#define E1000_ICR_CSRTO 0x01000000 /* CSR access Time Out Indication */
#define E1000_ICR_SCE 0x02000000 /* Storm Control Event */
#define E1000_ICR_SW_WD 0x04000000 /* Software Watchdog */
/* Extended Interrupts */
#define E1000_EICR_MSIX_MASK 0x01FFFFFF /* Bits used in MSI-X mode */
#define E1000_EICR_LEGACY_MASK 0x4000FFFF /* Bits used in non MSI-X mode */
/* Mirror VF Control (only RST bit); RW */
#define E1000_PVTCTRL(_n) (0x10000 + (_n) * 0x100)
/* Mirror Good Packets Received Count; RO */
#define E1000_PVFGPRC(_n) (0x10010 + (_n) * 0x100)
/* Mirror Good Packets Transmitted Count; RO */
#define E1000_PVFGPTC(_n) (0x10014 + (_n) * 0x100)
/* Mirror Good Octets Received Count; RO */
#define E1000_PVFGORC(_n) (0x10018 + (_n) * 0x100)
/* Mirror Extended Interrupt Cause Set; WO */
#define E1000_PVTEICS(_n) (0x10020 + (_n) * 0x100)
/* Mirror Extended Interrupt Mask Set/Read; RW */
#define E1000_PVTEIMS(_n) (0x10024 + (_n) * 0x100)
/* Mirror Extended Interrupt Mask Clear; WO */
#define E1000_PVTEIMC(_n) (0x10028 + (_n) * 0x100)
/* Mirror Extended Interrupt Auto Clear; RW */
#define E1000_PVTEIAC(_n) (0x1002C + (_n) * 0x100)
/* Mirror Extended Interrupt Auto Mask Enable; RW */
#define E1000_PVTEIAM(_n) (0x10030 + (_n) * 0x100)
/* Mirror Good Octets Transmitted Count; RO */
#define E1000_PVFGOTC(_n) (0x10034 + (_n) * 0x100)
/* Mirror Multicast Packets Received Count; RO */
#define E1000_PVFMPRC(_n) (0x1003C + (_n) * 0x100)
/* Mirror Good RX Packets loopback Count; RO */
#define E1000_PVFGPRLBC(_n) (0x10040 + (_n) * 0x100)
/* Mirror Good TX packets loopback Count; RO */
#define E1000_PVFGPTLBC(_n) (0x10044 + (_n) * 0x100)
/* Mirror Good RX Octets loopback Count; RO */
#define E1000_PVFGORLBC(_n) (0x10048 + (_n) * 0x100)
/* Mirror Good TX Octets loopback Count; RO */
#define E1000_PVFGOTLBC(_n) (0x10050 + (_n) * 0x100)
/* Mirror Extended Interrupt Cause Set; RC/W1C */
#define E1000_PVTEICR(_n) (0x10080 + (_n) * 0x100)
/*
* These are fake addresses that, according to the specification, the device
* is not using. They are used to distinguish between the PF and the VFs
* accessing their VTIVAR register (which is the same address, 0x1700)
*/
#define E1000_VTIVAR 0x11700
#define E1000_VTIVAR_MISC 0x11720
#define E1000_RSS_QUEUE(reta, hash) (E1000_RETA_VAL(reta, hash) & 0x0F)
#define E1000_MRQ_RSS_TYPE_IPV4UDP 7
#define E1000_MRQ_RSS_TYPE_IPV6UDP 8
#define E1000_STATUS_IOV_MODE 0x00040000
#define E1000_STATUS_NUM_VFS_SHIFT 14
#define E1000_ADVRXD_PKT_IP4 BIT(4)
#define E1000_ADVRXD_PKT_IP6 BIT(6)
#define E1000_ADVRXD_PKT_TCP BIT(8)
#define E1000_ADVRXD_PKT_UDP BIT(9)
#define E1000_ADVRXD_PKT_SCTP BIT(10)
static inline uint8_t igb_ivar_entry_rx(uint8_t i)
{
return i < 8 ? i * 4 : (i - 8) * 4 + 2;
}
static inline uint8_t igb_ivar_entry_tx(uint8_t i)
{
return i < 8 ? i * 4 + 1 : (i - 8) * 4 + 3;
}
#endif