- Netmap module is finally stable.

- Please refer to README.netmap for details.

README

@@ -151,36 +151,6 @@ mTCP can be prepared in two ways.
 
 6. Run the applications!
 
-
-- NETMAP VERSION (EXPERIMENTAL) -
----------------------------------
-1. Install the netmap driver and the corresponding ixgbe/ driver
-  - please go through netmap's documentation for installation
-  instructions
-  - Make sure that the underlying kernel module is correctly
-  working. You can use sample applications to validate your 
-  setup.
-
-2. Setup mtcp library:
-   	   # ./configure --enable-netmap
-   	   # make
-  - In case `./configure' script prints an error, run the
-    following command; and then re-do step-2 (configure again):
-    	   # autoreconf -ivf
-  - check libmtcp.a in mtcp/lib
-  - check header files in mtcp/include
-  - check example binary files in apps/example
-
-3. Check the configurations in apps/example
-  - epserver.conf for server-side configuration
-  - epwget.conf for client-side configuration
-  - you may write your own configuration file for your application
-
-4. Run the applications. *If you run the application with one thread,
-mTCP core will assume that the multi-queues option is disabled. This
-assumption is only valid for netmap version.*
-
-
 ========================================================================
  TESTED ENVIRONMENTS
 ========================================================================

README.netmap

@@ -0,0 +1,83 @@
+- NETMAP VERSION -
+------------------
+1. Install the netmap driver and the corresponding ixgbe/ driver
+  - please go through netmap's documentation for installation
+  instructions. We used the following command to set the compilation
+  scripts for netmap (for ixgbe driver).
+  	   # ./configure --kernel-dir=/path/to/kernel/src --no-drivers=i40e,virtio_net.c
+  - To run mTCP clients correctly, you need to modify the RSS
+  seed in ixgbe_main.c:ixgbe_setup_mrqc() function. Our mTCP stack
+  uses a specific RSS seed (mentioned below). 
+
+   	   - seed[10] should be reset to { 
+	     	      	  0x05050505, 0x05050505, 0x05050505,
+			  0x05050505, 0x05050505, 0x05050505, 0x05050505,
+			  0x05050505, 0x05050505, 0x05050505
+	     };
+  
+  - Make sure that the underlying kernel module is correctly
+  working. You can use sample applications to validate your 
+  setup.
+	   # make
+	   # sudo insmod ./netmap.ko
+	   # sudo insmod ./ixgbe/ixgbe.ko
+
+  - For optimum performance you are suggested to bind NICS IRQs to arbitrary
+  CPUs. Please use affinity-netmap.py script for this purpose. The current
+  script is setup for the netmap ixgbe driver. Please use a variant
+  of this file for other cases (igb, i40e etc.).
+  	   # ./config/affinity-netmap.py ${IFACE}
+
+  - Disable flow control in Ethernet layer
+    	   # sudo ethtool -A ${IFACE} rx off
+    	   # sudo ethtool -A ${IFACE} tx off
+
+  - Disable lro (large receive offload) in Ethernet device. mTCP
+  does not support large packet sizes (> 1514B) yet)
+       	   # sudo ethtool -K ${IFACE} lro off
+
+  - We used example/pktgen to test netmap raw network I/O
+  performance. Netmap's pktgen can be used not only for
+  packet generation but also packet reception. Since mTCP
+  relies on RSS-based NIC hardware queues, we recommend using
+  the following command-line arguments to test pkt-gen as a
+  sink before testing mTCP for netmap.
+  	   -SINK- (assuming the machine has 4 cpus)
+	   # sudo ./pkt-gen -i ${IFACE}-0 -f rx -c 1 -a 0 -b 64 &
+	   # sudo ./pkt-gen -i ${IFACE}-1 -f rx -c 1 -a 1 -b 64 &
+	   # sudo ./pkt-gen -i ${IFACE}-2 -f rx -c 1 -a 2 -b 64 &
+	   # sudo ./pkt-gen -i ${IFACE}-3 -f rx -c 1 -a 3 -b 64 &
+
+  where ${IFACE} is netmap-enabled interface.
+  The netmap README file shows a concise description on how to
+  use the driver. We reiterate some points that are essential in
+  understanding the command line arguments above. An interface
+  name post-appended with a number means that the process will
+  read traffic from the specified NIC hardware queue. `-a` argument
+  lets the program bind to a specific core.
+  
+2. Setup mtcp library:
+   	   # ./configure --enable-netmap
+   	   # make
+  - In case `./configure' script prints an error, run the
+    following command; and then re-do step-2 (configure again):
+    	   # autoreconf -ivf
+  - check libmtcp.a in mtcp/lib
+  - check header files in mtcp/include
+  - check example binary files in apps/example
+
+3. Check the configurations in apps/example
+  - epserver.conf for server-side configuration
+  - epwget.conf for client-side configuration
+  - you may write your own configuration file for your application
+
+4. Run the applications. *If you run the application with one thread,
+mTCP core will assume that the multi-queues option is disabled. This
+assumption is only valid for netmap version.*
+
+5. Netmap module (mtcp/src/netmap_module.c) by default uses blocking
+I/O by default. Most microbenchmarking applications (epserver/epwget)
+shows best performance with this setup in our testbed. In case the
+performance is sub-optimal in yours, we recommend that you try polling
+mode (by enabling CONST_POLLING in line 24). You can also try tweaking
+IDLE_POLL_WAIT/IDLE_POLL_COUNT macros while testing blocking mode I/O.

TODOS

@@ -2,8 +2,6 @@
  TODOs list for mTCP
 ========================================================================
 
-* Add I/O module for netmap
-
 * Add I/O module for libpcap
 
 * Add virtualization support for mTCP

apps/apache_benchmark/README-mtcp

@@ -29,6 +29,9 @@ If you want to use ab with mTCP,
 	--with-libdpdk="<$PATH_TO_MTCP_RELEASE_V3>/dpdk/"
   )
 
+-FOR NETMAP VERSION-
+ $ ./configure --with-libmtcp=${PATH_TO_LIBMTCP}
+
 Without this option, you can use multi-threaded version of ab.
 
  $ ./configure

apps/apache_benchmark/configure

@@ -5508,9 +5508,10 @@ LIBDPDK_CFLAGS=""
 LIBDPDK_LIBS=""
 
 if test "$WITH_LIBDPDK" != "no"; then
-	DPDK_MACHINE_FLAGS=$(shell cat $WITH_LIBDPDK/include/cflags.txt)
+	DPDK_MACHINE_FLAGS=`cat $WITH_LIBDPDK/include/cflags.txt`
 	LIBDPDK_CFLAGS="$DPDK_MACHINE_FLAGS -I$WITH_LIBDPDK/include/"
-	LIBDPDK_LIBS="-L$WITH_LIBDPDK/lib/ -m64 -g -O3 -pthread -lrt -march=native -Wl,-export-dynamic -Wl,-lnuma -Wl,-lpthread -Wl,-lmtcp -Wl,-lrt -Wl,-ldl -Wl,--whole-archive -Wl,-lrte_distributor -Wl,-lrte_kni -Wl,-lrte_pipeline -Wl,-lrte_table -Wl,-lrte_port -Wl,-lrte_timer -Wl,-lrte_hash -Wl,-lrte_lpm -Wl,-lrte_power -Wl,-lrte_acl -Wl,-lrte_meter -Wl,-lrte_sched -Wl,-lm -Wl,-lrt -Wl,--start-group -Wl,-lrte_kvargs -Wl,-lrte_mbuf -Wl,-lrte_ip_frag -Wl,-lethdev -Wl,-lrte_mempool -Wl,-lrte_ring -Wl,-lrte_eal -Wl,-lrte_cmdline -Wl,-lrte_cfgfile -Wl,-lrte_pmd_bond -Wl,-lrte_pmd_virtio -Wl,-lrte_pmd_vmxnet3_uio -Wl,-lrte_pmd_i40e -Wl,-lrte_pmd_ixgbe -Wl,-lrte_pmd_e1000 -Wl,-lrte_pmd_ring -Wl,-lrt -Wl,-lm -Wl,-ldl -Wl,--end-group -Wl,--no-whole-archive"
+	DPDK_MACHINE_LDFLAGS=`cat $WITH_LIBDPDK/lib/ldflags.txt`
+	LIBDPDK_LIBS="-L$WITH_LIBDPDK/lib/ -m64 -g -O3 -pthread -lrt -march=native -Wl,-export-dynamic -Wl,-lnuma -Wl,-lpthread -Wl,-lmtcp -Wl,-lrt -Wl,-ldl -Wl,$DPDK_MACHINE_LDFLAGS"
 	CFLAGS="${CFLAGS} ${LIBDPDK_CFLAGS}"
 	LIBS="${LIBS} ${LIBDPDK_LIBS}"
 

apps/example/Makefile.in

@@ -40,7 +40,8 @@ INC += ${DPDK_MACHINE_FLAGS} -I${DPDK_INC} -include $(DPDK_INC)/rte_config.h
 endif
 
 ifeq ($(DPDK),1)
-LIBS += -m64 -g -O3 -pthread -lrt -march=native -Wl,-export-dynamic ${MTCP_FLD}/lib/libmtcp.a -L../../dpdk/lib -Wl,-lnuma -Wl,-lmtcp -Wl,-lpthread -Wl,-lrt -Wl,-ldl -Wl,--whole-archive -Wl,-lrte_distributor -Wl,-lrte_kni -Wl,-lrte_pipeline -Wl,-lrte_table -Wl,-lrte_port -Wl,-lrte_timer -Wl,-lrte_hash -Wl,-lrte_lpm -Wl,-lrte_power -Wl,-lrte_acl -Wl,-lrte_meter -Wl,-lrte_sched -Wl,-lm -Wl,-lrt -Wl,--start-group -Wl,-lrte_kvargs -Wl,-lrte_mbuf -Wl,-lrte_ip_frag -Wl,-lethdev -Wl,-lrte_mempool -Wl,-lrte_ring -Wl,-lrte_eal -Wl,-lrte_cmdline -Wl,-lrte_cfgfile -Wl,-lrte_pmd_bond -Wl,-lrte_pmd_virtio -Wl,-lrte_pmd_vmxnet3_uio -Wl,-lrte_pmd_i40e -Wl,-lrte_pmd_ixgbe -Wl,-lrte_pmd_e1000 -Wl,-lrte_pmd_ring -Wl,-lrt -Wl,-lm -Wl,-ldl -Wl,--end-group -Wl,--no-whole-archive
+DPDK_LIB_FLAGS = $(shell cat @DPDKLIBPATH@/lib/ldflags.txt)
+LIBS += -m64 -g -O3 -pthread -lrt -march=native -Wl,-export-dynamic ${MTCP_FLD}/lib/libmtcp.a -L../../dpdk/lib -Wl,-lnuma -Wl,-lmtcp -Wl,-lpthread -Wl,-lrt -Wl,-ldl -Wl,${DPDK_LIB_FLAGS}
 endif
 
 all: epserver epwget

apps/lighttpd-1.4.32/INSTALL

@@ -50,13 +50,15 @@ Configure the program with the following arguments:
   $ ./configure --without-bzip2 CFLAGS="-O3" \
     --with-libmtcp=${PATH_TO_LIBMTCP} \
     --with-libpsio=${PATH_TO_LIBPSIO} \
-    --with-libdpdk=${PATH_TO_LIBDPDK}
+    --with-libdpdk=${PATH_TO_LIBDPDK} \
+    --enable-netmap
     
   (e.g.
 	$ ./configure --without-bzip2 CFLAGS="-g -O3" \
 	--with-libmtcp="<$PATH_TO_MTCP_RELEASE_V3>/mtcp/" \
 	--with-libpsio="<$PATH_TO_MTCP_RELEASE_V3>/io_engine/" \
-	--with-libdpdk="<$PATH_TO_MTCP_RELEASE_V3>/dpdk/"
+	--with-libdpdk="<$PATH_TO_MTCP_RELEASE_V3>/dpdk/" \
+	--enable-netmap
   )
 
 The path should be absolute.
@@ -64,13 +66,14 @@ The path should be absolute.
   ## For debugging
   $ ./configure --without-bzip2 CFLAGS="-g -DINFO -DDBGERR" \
     --with-libmtcp=${PATH_TO_LIBMTCP} --with-libpsio=${PATH_TO_LIBPSIO} \
-    --with-libdpdk=${PATH_TO_LIBDPDK}
+    --with-libdpdk=${PATH_TO_LIBDPDK} --enable-netmap
 
   (e.g.
 	$ ./configure --without-bzip2 CFLAGS="-g -DINFO -DDBGERR" \
 	--with-libmtcp="<$PATH_TO_MTCP_RELEASE_V3>/mtcp/" \
 	--with-libpsio="<$PATH_TO_MTCP_RELEASE_V3>/io_engine/" \
-	--with-libdpdk="<$PATH_TO_MTCP_RELEASE_V3>/dpdk/"
+	--with-libdpdk="<$PATH_TO_MTCP_RELEASE_V3>/dpdk/" \
+	--enable-netmap
   )
 
 Please remember to adjust lighttpd.conf file carefully.

apps/lighttpd-1.4.32/Makefile.in

@@ -1,9 +1,8 @@
-# Makefile.in generated by automake 1.11.6 from Makefile.am.
+# Makefile.in generated by automake 1.14.1 from Makefile.am.
 # @configure_input@
 
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# Copyright (C) 1994-2013 Free Software Foundation, Inc.
-# 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software
+
-# Foundation, Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -15,23 +14,51 @@
 
 @SET_MAKE@
 VPATH = @srcdir@
-am__make_dryrun = \
+am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
-  { \
+am__make_running_with_option = \
-    am__dry=no; \
+  case $${target_option-} in \
+      ?) ;; \
+      *) echo "am__make_running_with_option: internal error: invalid" \
+              "target option '$${target_option-}' specified" >&2; \
+         exit 1;; \
+  esac; \
+  has_opt=no; \
+  sane_makeflags=$$MAKEFLAGS; \
+  if $(am__is_gnu_make); then \
+    sane_makeflags=$$MFLAGS; \
+  else \
     case $$MAKEFLAGS in \
       *\\[\ \	]*) \
-        echo 'am--echo: ; @echo "AM"  OK' | $(MAKE) -f - 2>/dev/null \
+        bs=\\; \
-          | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
+        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
-      *) \
+          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
-        for am__flg in $$MAKEFLAGS; do \
-          case $$am__flg in \
-            *=*|--*) ;; \
-            *n*) am__dry=yes; break;; \
     esac; \
-        done;; \
+  fi; \
+  skip_next=no; \
+  strip_trailopt () \
+  { \
+    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+  }; \
+  for flg in $$sane_makeflags; do \
+    test $$skip_next = yes && { skip_next=no; continue; }; \
+    case $$flg in \
+      *=*|--*) continue;; \
+        -*I) strip_trailopt 'I'; skip_next=yes;; \
+      -*I?*) strip_trailopt 'I';; \
+        -*O) strip_trailopt 'O'; skip_next=yes;; \
+      -*O?*) strip_trailopt 'O';; \
+        -*l) strip_trailopt 'l'; skip_next=yes;; \
+      -*l?*) strip_trailopt 'l';; \
+      -[dEDm]) skip_next=yes;; \
+      -[JT]) skip_next=yes;; \
     esac; \
-    test $$am__dry = yes; \
+    case $$flg in \
-  }
+      *$$target_option*) has_opt=yes; break;; \
+    esac; \
+  done; \
+  test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
 pkgdatadir = $(datadir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
 pkglibdir = $(libdir)/@PACKAGE@
@@ -52,11 +79,11 @@ build_triplet = @build@
 host_triplet = @host@
 target_triplet = @target@
 subdir = .
-DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \
+DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \
-	$(srcdir)/Makefile.in $(srcdir)/config.h.in \
+	$(top_srcdir)/configure $(am__configure_deps) \
-	$(srcdir)/distribute.sh.in $(top_srcdir)/configure AUTHORS \
+	$(srcdir)/config.h.in $(srcdir)/distribute.sh.in AUTHORS \
-	COPYING INSTALL NEWS ar-lib compile config.guess config.sub \
+	COPYING INSTALL NEWS README ar-lib compile config.guess \
-	depcomp install-sh ltmain.sh missing
+	config.sub depcomp install-sh missing ltmain.sh
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
 am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \
 	$(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
@@ -70,21 +97,28 @@ mkinstalldirs = $(install_sh) -d
 CONFIG_HEADER = config.h
 CONFIG_CLEAN_FILES = distribute.sh
 CONFIG_CLEAN_VPATH_FILES =
+AM_V_P = $(am__v_P_@AM_V@)
+am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
+am__v_P_0 = false
+am__v_P_1 = :
 AM_V_GEN = $(am__v_GEN_@AM_V@)
 am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
 am__v_GEN_0 = @echo "  GEN     " $@;
+am__v_GEN_1 = 
 AM_V_at = $(am__v_at_@AM_V@)
 am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
 am__v_at_0 = @
+am__v_at_1 = 
 SOURCES =
 DIST_SOURCES =
-RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
+RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
-	html-recursive info-recursive install-data-recursive \
+	ctags-recursive dvi-recursive html-recursive info-recursive \
-	install-dvi-recursive install-exec-recursive \
+	install-data-recursive install-dvi-recursive \
-	install-html-recursive install-info-recursive \
+	install-exec-recursive install-html-recursive \
-	install-pdf-recursive install-ps-recursive install-recursive \
+	install-info-recursive install-pdf-recursive \
-	installcheck-recursive installdirs-recursive pdf-recursive \
+	install-ps-recursive install-recursive installcheck-recursive \
-	ps-recursive uninstall-recursive
+	installdirs-recursive pdf-recursive ps-recursive \
+	tags-recursive uninstall-recursive
 am__can_run_installinfo = \
   case $$AM_UPDATE_INFO_DIR in \
     n|no|NO) false;; \
@@ -92,11 +126,33 @@ am__can_run_installinfo = \
   esac
 RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
   distclean-recursive maintainer-clean-recursive
-AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
+am__recursive_targets = \
-	$(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
+  $(RECURSIVE_TARGETS) \
-	distdir dist dist-all distcheck
+  $(RECURSIVE_CLEAN_TARGETS) \
+  $(am__extra_recursive_targets)
+AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
+	cscope distdir dist dist-all distcheck
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) \
+	$(LISP)config.h.in
+# Read a list of newline-separated strings from the standard input,
+# and print each of them once, without duplicates.  Input order is
+# *not* preserved.
+am__uniquify_input = $(AWK) '\
+  BEGIN { nonempty = 0; } \
+  { items[$$0] = 1; nonempty = 1; } \
+  END { if (nonempty) { for (i in items) print i; }; } \
+'
+# Make sure the list of sources is unique.  This is necessary because,
+# e.g., the same source file might be shared among _SOURCES variables
+# for different programs/libraries.
+am__define_uniq_tagged_files = \
+  list='$(am__tagged_files)'; \
+  unique=`for i in $$list; do \
+    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+  done | $(am__uniquify_input)`
 ETAGS = etags
 CTAGS = ctags
+CSCOPE = cscope
 DIST_SUBDIRS = $(SUBDIRS)
 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
 distdir = $(PACKAGE)-$(VERSION)
@@ -107,6 +163,7 @@ am__remove_distdir = \
       && rm -rf "$(distdir)" \
       || { sleep 5 && rm -rf "$(distdir)"; }; \
   else :; fi
+am__post_remove_distdir = $(am__remove_distdir)
 am__relativize = \
   dir0=`pwd`; \
   sed_first='s,^\([^/]*\)/.*$$,\1,'; \
@@ -134,6 +191,7 @@ am__relativize = \
   reldir="$$dir2"
 DIST_ARCHIVES = $(distdir).tar.gz $(distdir).tar.bz2
 GZIP_ENV = --best
+DIST_TARGETS = dist-bzip2 dist-gzip
 distuninstallcheck_listfiles = find . -type f -print
 am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
   | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
@@ -335,8 +393,8 @@ $(ACLOCAL_M4):  $(am__aclocal_m4_deps)
 $(am__aclocal_m4_deps):
 
 config.h: stamp-h1
-	@if test ! -f $@; then rm -f stamp-h1; else :; fi
+	@test -f $@ || rm -f stamp-h1
-	@if test ! -f $@; then $(MAKE) $(AM_MAKEFLAGS) stamp-h1; else :; fi
+	@test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1
 
 stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
 	@rm -f stamp-h1
@@ -361,22 +419,25 @@ distclean-libtool:
 	-rm -f libtool config.lt
 
 # This directory's subdirectories are mostly independent; you can cd
-# into them and run `make' without going through this Makefile.
+# into them and run 'make' without going through this Makefile.
-# To change the values of `make' variables: instead of editing Makefiles,
+# To change the values of 'make' variables: instead of editing Makefiles,
-# (1) if the variable is set in `config.status', edit `config.status'
+# (1) if the variable is set in 'config.status', edit 'config.status'
-#     (which will cause the Makefiles to be regenerated when you run `make');
+#     (which will cause the Makefiles to be regenerated when you run 'make');
-# (2) otherwise, pass the desired values on the `make' command line.
+# (2) otherwise, pass the desired values on the 'make' command line.
-$(RECURSIVE_TARGETS):
+$(am__recursive_targets):
-	@fail= failcom='exit 1'; \
+	@fail=; \
-	for f in x $$MAKEFLAGS; do \
+	if $(am__make_keepgoing); then \
-	  case $$f in \
+	  failcom='fail=yes'; \
-	    *=* | --[!k]*);; \
+	else \
-	    *k*) failcom='fail=yes';; \
+	  failcom='exit 1'; \
-	  esac; \
+	fi; \
-	done; \
 	dot_seen=no; \
 	target=`echo $@ | sed s/-recursive//`; \
-	list='$(SUBDIRS)'; for subdir in $$list; do \
+	case "$@" in \
+	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+	  *) list='$(SUBDIRS)' ;; \
+	esac; \
+	for subdir in $$list; do \
 	  echo "Making $$target in $$subdir"; \
 	  if test "$$subdir" = "."; then \
 	    dot_seen=yes; \
@@ -391,57 +452,12 @@ $(RECURSIVE_TARGETS):
 	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
 	fi; test -z "$$fail"
 
-$(RECURSIVE_CLEAN_TARGETS):
+ID: $(am__tagged_files)
-	@fail= failcom='exit 1'; \
+	$(am__define_uniq_tagged_files); mkid -fID $$unique
-	for f in x $$MAKEFLAGS; do \
+tags: tags-recursive
-	  case $$f in \
+TAGS: tags
-	    *=* | --[!k]*);; \
-	    *k*) failcom='fail=yes';; \
-	  esac; \
-	done; \
-	dot_seen=no; \
-	case "$@" in \
-	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
-	  *) list='$(SUBDIRS)' ;; \
-	esac; \
-	rev=''; for subdir in $$list; do \
-	  if test "$$subdir" = "."; then :; else \
-	    rev="$$subdir $$rev"; \
-	  fi; \
-	done; \
-	rev="$$rev ."; \
-	target=`echo $@ | sed s/-recursive//`; \
-	for subdir in $$rev; do \
-	  echo "Making $$target in $$subdir"; \
-	  if test "$$subdir" = "."; then \
-	    local_target="$$target-am"; \
-	  else \
-	    local_target="$$target"; \
-	  fi; \
-	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
-	  || eval $$failcom; \
-	done && test -z "$$fail"
-tags-recursive:
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
-	done
-ctags-recursive:
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
-	done
 
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
-	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
-	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	mkid -fID $$unique
-tags: TAGS
-
-TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
-		$(TAGS_FILES) $(LISP)
 	set x; \
 	here=`pwd`; \
 	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
@@ -457,12 +473,7 @@ TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
 	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
 	  fi; \
 	done; \
-	list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
+	$(am__define_uniq_tagged_files); \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
-	      END { if (nonempty) { for (i in files) print i; }; }'`; \
 	shift; \
 	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 	  test -n "$$unique" || unique=$$empty_fix; \
@@ -474,15 +485,11 @@ TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
 	      $$unique; \
 	  fi; \
 	fi
-ctags: CTAGS
+ctags: ctags-recursive
-CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
+
-		$(TAGS_FILES) $(LISP)
+CTAGS: ctags
-	list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
+ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
-	unique=`for i in $$list; do \
+	$(am__define_uniq_tagged_files); \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
-	      END { if (nonempty) { for (i in files) print i; }; }'`; \
 	test -z "$(CTAGS_ARGS)$$unique" \
 	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
 	     $$unique
@@ -491,9 +498,31 @@ GTAGS:
 	here=`$(am__cd) $(top_builddir) && pwd` \
 	  && $(am__cd) $(top_srcdir) \
 	  && gtags -i $(GTAGS_ARGS) "$$here"
+cscope: cscope.files
+	test ! -s cscope.files \
+	  || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
+clean-cscope:
+	-rm -f cscope.files
+cscope.files: clean-cscope cscopelist
+cscopelist: cscopelist-recursive
+
+cscopelist-am: $(am__tagged_files)
+	list='$(am__tagged_files)'; \
+	case "$(srcdir)" in \
+	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
+	  *) sdir=$(subdir)/$(srcdir) ;; \
+	esac; \
+	for i in $$list; do \
+	  if test -f "$$i"; then \
+	    echo "$(subdir)/$$i"; \
+	  else \
+	    echo "$$sdir/$$i"; \
+	  fi; \
+	done >> $(top_builddir)/cscope.files
 
 distclean-tags:
 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+	-rm -f cscope.out cscope.in.out cscope.po.out cscope.files
 
 distdir: $(DISTFILES)
 	$(am__remove_distdir)
@@ -561,40 +590,41 @@ distdir: $(DISTFILES)
 	|| chmod -R a+r "$(distdir)"
 dist-gzip: distdir
 	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
-	$(am__remove_distdir)
+	$(am__post_remove_distdir)
 dist-bzip2: distdir
 	tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
-	$(am__remove_distdir)
+	$(am__post_remove_distdir)
 
 dist-lzip: distdir
 	tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
-	$(am__remove_distdir)
+	$(am__post_remove_distdir)
-
-dist-lzma: distdir
-	tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma
-	$(am__remove_distdir)
 
 dist-xz: distdir
 	tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
-	$(am__remove_distdir)
+	$(am__post_remove_distdir)
 
 dist-tarZ: distdir
+	@echo WARNING: "Support for shar distribution archives is" \
+	               "deprecated." >&2
+	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
 	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
-	$(am__remove_distdir)
+	$(am__post_remove_distdir)
 
 dist-shar: distdir
+	@echo WARNING: "Support for distribution archives compressed with" \
+		       "legacy program 'compress' is deprecated." >&2
+	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
 	shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
-	$(am__remove_distdir)
+	$(am__post_remove_distdir)
 
 dist-zip: distdir
 	-rm -f $(distdir).zip
 	zip -rq $(distdir).zip $(distdir)
-	$(am__remove_distdir)
+	$(am__post_remove_distdir)
 
-dist dist-all: distdir
+dist dist-all:
-	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
+	$(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
-	tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
+	$(am__post_remove_distdir)
-	$(am__remove_distdir)
 
 # This target untars the dist file and tries a VPATH configuration.  Then
 # it guarantees that the distribution is self-contained by making another
@@ -605,8 +635,6 @@ distcheck: dist
 	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
 	*.tar.bz2*) \
 	  bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
-	*.tar.lzma*) \
-	  lzma -dc $(distdir).tar.lzma | $(am__untar) ;;\
 	*.tar.lz*) \
 	  lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
 	*.tar.xz*) \
@@ -618,18 +646,19 @@ distcheck: dist
 	*.zip*) \
 	  unzip $(distdir).zip ;;\
 	esac
-	chmod -R a-w $(distdir); chmod u+w $(distdir)
+	chmod -R a-w $(distdir)
-	mkdir $(distdir)/_build
+	chmod u+w $(distdir)
-	mkdir $(distdir)/_inst
+	mkdir $(distdir)/_build $(distdir)/_inst
 	chmod a-w $(distdir)
 	test -d $(distdir)/_build || exit 0; \
 	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
 	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
 	  && am__cwd=`pwd` \
 	  && $(am__cd) $(distdir)/_build \
-	  && ../configure --srcdir=.. --prefix="$$dc_install_base" \
+	  && ../configure \
 	    $(AM_DISTCHECK_CONFIGURE_FLAGS) \
 	    $(DISTCHECK_CONFIGURE_FLAGS) \
+	    --srcdir=.. --prefix="$$dc_install_base" \
 	  && $(MAKE) $(AM_MAKEFLAGS) \
 	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
 	  && $(MAKE) $(AM_MAKEFLAGS) check \
@@ -652,7 +681,7 @@ distcheck: dist
 	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
 	  && cd "$$am__cwd" \
 	  || exit 1
-	$(am__remove_distdir)
+	$(am__post_remove_distdir)
 	@(echo "$(distdir) archives ready for distribution: "; \
 	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
 	  sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
@@ -787,24 +816,24 @@ ps-am:
 
 uninstall-am:
 
-.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) all \
+.MAKE: $(am__recursive_targets) all install-am install-strip
-	ctags-recursive install-am install-strip tags-recursive
 
-.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
+.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \
-	all all-am am--refresh check check-am clean clean-generic \
+	am--refresh check check-am clean clean-cscope clean-generic \
-	clean-libtool ctags ctags-recursive dist dist-all dist-bzip2 \
+	clean-libtool cscope cscopelist-am ctags ctags-am dist \
-	dist-gzip dist-lzip dist-lzma dist-shar dist-tarZ dist-xz \
+	dist-all dist-bzip2 dist-gzip dist-lzip dist-shar dist-tarZ \
-	dist-zip distcheck distclean distclean-generic distclean-hdr \
+	dist-xz dist-zip distcheck distclean distclean-generic \
-	distclean-libtool distclean-tags distcleancheck distdir \
+	distclean-hdr distclean-libtool distclean-tags distcleancheck \
-	distuninstallcheck dvi dvi-am html html-am info info-am \
+	distdir distuninstallcheck dvi dvi-am html html-am info \
-	install install-am install-data install-data-am install-dvi \
+	info-am install install-am install-data install-data-am \
-	install-dvi-am install-exec install-exec-am install-html \
+	install-dvi install-dvi-am install-exec install-exec-am \
-	install-html-am install-info install-info-am install-man \
+	install-html install-html-am install-info install-info-am \
-	install-pdf install-pdf-am install-ps install-ps-am \
+	install-man install-pdf install-pdf-am install-ps \
-	install-strip installcheck installcheck-am installdirs \
+	install-ps-am install-strip installcheck installcheck-am \
-	installdirs-am maintainer-clean maintainer-clean-generic \
+	installdirs installdirs-am maintainer-clean \
-	mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \
+	maintainer-clean-generic mostlyclean mostlyclean-generic \
-	ps ps-am tags tags-recursive uninstall uninstall-am
+	mostlyclean-libtool pdf pdf-am ps ps-am tags tags-am uninstall \
+	uninstall-am
 
 
 # Tell versions [3.59,3.63) of GNU make to not export all variables.

apps/lighttpd-1.4.32/ar-lib

@@ -4,7 +4,7 @@
 me=ar-lib
 scriptversion=2012-03-01.08; # UTC
 
-# Copyright (C) 2010, 2012 Free Software Foundation, Inc.
+# Copyright (C) 2010-2013 Free Software Foundation, Inc.
 # Written by Peter Rosin <peda@lysator.liu.se>.
 #
 # This program is free software; you can redistribute it and/or modify

apps/lighttpd-1.4.32/compile

@@ -1,10 +1,9 @@
 #! /bin/sh
 # Wrapper for compilers which do not understand '-c -o'.
 
-scriptversion=2012-03-05.13; # UTC
+scriptversion=2012-10-14.11; # UTC
 
-# Copyright (C) 1999, 2000, 2003, 2004, 2005, 2009, 2010, 2012 Free
+# Copyright (C) 1999-2013 Free Software Foundation, Inc.
-# Software Foundation, Inc.
 # Written by Tom Tromey <tromey@cygnus.com>.
 #
 # This program is free software; you can redistribute it and/or modify
@@ -113,6 +112,11 @@ func_cl_dashl ()
       lib=$dir/$lib.lib
       break
     fi
+    if test -f "$dir/lib$lib.a"; then
+      found=yes
+      lib=$dir/lib$lib.a
+      break
+    fi
   done
   IFS=$save_IFS
 

apps/lighttpd-1.4.32/config.guess

@@ -1,14 +1,12 @@
 #! /bin/sh
 # Attempt to guess a canonical system name.
-#   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
+#   Copyright 1992-2013 Free Software Foundation, Inc.
-#   2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010,
-#   2011, 2012 Free Software Foundation, Inc.
 
-timestamp='2012-02-10'
+timestamp='2013-06-10'
 
 # This file is free software; you can redistribute it and/or modify it
 # under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
+# the Free Software Foundation; either version 3 of the License, or
 # (at your option) any later version.
 #
 # This program is distributed in the hope that it will be useful, but
@@ -22,19 +20,17 @@ timestamp='2012-02-10'
 # As a special exception to the GNU General Public License, if you
 # distribute this file as part of a program that contains a
 # configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
+# the same distribution terms that you use for the rest of that
-
+# program.  This Exception is an additional permission under section 7
-
+# of the GNU General Public License, version 3 ("GPLv3").
-# Originally written by Per Bothner.  Please send patches (context
-# diff format) to <config-patches@gnu.org> and include a ChangeLog
-# entry.
 #
-# This script attempts to guess a canonical system name similar to
+# Originally written by Per Bothner.
-# config.sub.  If it succeeds, it prints the system name on stdout, and
-# exits with 0.  Otherwise, it exits with 1.
 #
 # You can get the latest version of this script from:
 # http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD
+#
+# Please send patches with a ChangeLog entry to config-patches@gnu.org.
+
 
 me=`echo "$0" | sed -e 's,.*/,,'`
 
@@ -54,9 +50,7 @@ version="\
 GNU config.guess ($timestamp)
 
 Originally written by Per Bothner.
-Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000,
+Copyright 1992-2013 Free Software Foundation, Inc.
-2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
-Free Software Foundation, Inc.
 
 This is free software; see the source for copying conditions.  There is NO
 warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
@@ -138,6 +132,27 @@ UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown
 UNAME_SYSTEM=`(uname -s) 2>/dev/null`  || UNAME_SYSTEM=unknown
 UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown
 
+case "${UNAME_SYSTEM}" in
+Linux|GNU|GNU/*)
+	# If the system lacks a compiler, then just pick glibc.
+	# We could probably try harder.
+	LIBC=gnu
+
+	eval $set_cc_for_build
+	cat <<-EOF > $dummy.c
+	#include <features.h>
+	#if defined(__UCLIBC__)
+	LIBC=uclibc
+	#elif defined(__dietlibc__)
+	LIBC=dietlibc
+	#else
+	LIBC=gnu
+	#endif
+	EOF
+	eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^LIBC'`
+	;;
+esac
+
 # Note: order is significant - the case branches are not exclusive.
 
 case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
@@ -200,6 +215,10 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
 	# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used.
 	echo "${machine}-${os}${release}"
 	exit ;;
+    *:Bitrig:*:*)
+	UNAME_MACHINE_ARCH=`arch | sed 's/Bitrig.//'`
+	echo ${UNAME_MACHINE_ARCH}-unknown-bitrig${UNAME_RELEASE}
+	exit ;;
     *:OpenBSD:*:*)
 	UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'`
 	echo ${UNAME_MACHINE_ARCH}-unknown-openbsd${UNAME_RELEASE}
@@ -302,7 +321,7 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
     arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*)
 	echo arm-acorn-riscix${UNAME_RELEASE}
 	exit ;;
-    arm:riscos:*:*|arm:RISCOS:*:*)
+    arm*:riscos:*:*|arm*:RISCOS:*:*)
 	echo arm-unknown-riscos
 	exit ;;
     SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*)
@@ -801,6 +820,9 @@ EOF
     i*:CYGWIN*:*)
 	echo ${UNAME_MACHINE}-pc-cygwin
 	exit ;;
+    *:MINGW64*:*)
+	echo ${UNAME_MACHINE}-pc-mingw64
+	exit ;;
     *:MINGW*:*)
 	echo ${UNAME_MACHINE}-pc-mingw32
 	exit ;;
@@ -852,21 +874,21 @@ EOF
 	exit ;;
     *:GNU:*:*)
 	# the GNU system
-	echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'`
+	echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-${LIBC}`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'`
 	exit ;;
     *:GNU/*:*:*)
 	# other systems with GNU libc and userland
-	echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-gnu
+	echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-${LIBC}
 	exit ;;
     i*86:Minix:*:*)
 	echo ${UNAME_MACHINE}-pc-minix
 	exit ;;
     aarch64:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
 	exit ;;
     aarch64_be:Linux:*:*)
 	UNAME_MACHINE=aarch64_be
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
 	exit ;;
     alpha:Linux:*:*)
 	case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in
@@ -879,59 +901,54 @@ EOF
 	  EV68*) UNAME_MACHINE=alphaev68 ;;
 	esac
 	objdump --private-headers /bin/sh | grep -q ld.so.1
-	if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi
+	if test "$?" = 0 ; then LIBC="gnulibc1" ; fi
-	echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC}
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+	exit ;;
+    arc:Linux:*:* | arceb:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
 	exit ;;
     arm*:Linux:*:*)
 	eval $set_cc_for_build
 	if echo __ARM_EABI__ | $CC_FOR_BUILD -E - 2>/dev/null \
 	    | grep -q __ARM_EABI__
 	then
-	    echo ${UNAME_MACHINE}-unknown-linux-gnu
+	    echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
 	else
 	    if echo __ARM_PCS_VFP | $CC_FOR_BUILD -E - 2>/dev/null \
 		| grep -q __ARM_PCS_VFP
 	    then
-		echo ${UNAME_MACHINE}-unknown-linux-gnueabi
+		echo ${UNAME_MACHINE}-unknown-linux-${LIBC}eabi
 	    else
-		echo ${UNAME_MACHINE}-unknown-linux-gnueabihf
+		echo ${UNAME_MACHINE}-unknown-linux-${LIBC}eabihf
 	    fi
 	fi
 	exit ;;
     avr32*:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
 	exit ;;
     cris:Linux:*:*)
-	echo ${UNAME_MACHINE}-axis-linux-gnu
+	echo ${UNAME_MACHINE}-axis-linux-${LIBC}
 	exit ;;
     crisv32:Linux:*:*)
-	echo ${UNAME_MACHINE}-axis-linux-gnu
+	echo ${UNAME_MACHINE}-axis-linux-${LIBC}
 	exit ;;
     frv:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
 	exit ;;
     hexagon:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
 	exit ;;
     i*86:Linux:*:*)
-	LIBC=gnu
+	echo ${UNAME_MACHINE}-pc-linux-${LIBC}
-	eval $set_cc_for_build
-	sed 's/^	//' << EOF >$dummy.c
-	#ifdef __dietlibc__
-	LIBC=dietlibc
-	#endif
-EOF
-	eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^LIBC'`
-	echo "${UNAME_MACHINE}-pc-linux-${LIBC}"
 	exit ;;
     ia64:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
 	exit ;;
     m32r*:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
 	exit ;;
     m68*:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
 	exit ;;
     mips:Linux:*:* | mips64:Linux:*:*)
 	eval $set_cc_for_build
@@ -950,54 +967,63 @@ EOF
 	#endif
 EOF
 	eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^CPU'`
-	test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; }
+	test x"${CPU}" != x && { echo "${CPU}-unknown-linux-${LIBC}"; exit; }
 	;;
+    or1k:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+	exit ;;
     or32:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
 	exit ;;
     padre:Linux:*:*)
-	echo sparc-unknown-linux-gnu
+	echo sparc-unknown-linux-${LIBC}
 	exit ;;
     parisc64:Linux:*:* | hppa64:Linux:*:*)
-	echo hppa64-unknown-linux-gnu
+	echo hppa64-unknown-linux-${LIBC}
 	exit ;;
     parisc:Linux:*:* | hppa:Linux:*:*)
 	# Look for CPU level
 	case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in
-	  PA7*) echo hppa1.1-unknown-linux-gnu ;;
+	  PA7*) echo hppa1.1-unknown-linux-${LIBC} ;;
-	  PA8*) echo hppa2.0-unknown-linux-gnu ;;
+	  PA8*) echo hppa2.0-unknown-linux-${LIBC} ;;
-	  *)    echo hppa-unknown-linux-gnu ;;
+	  *)    echo hppa-unknown-linux-${LIBC} ;;
 	esac
 	exit ;;
     ppc64:Linux:*:*)
-	echo powerpc64-unknown-linux-gnu
+	echo powerpc64-unknown-linux-${LIBC}
 	exit ;;
     ppc:Linux:*:*)
-	echo powerpc-unknown-linux-gnu
+	echo powerpc-unknown-linux-${LIBC}
+	exit ;;
+    ppc64le:Linux:*:*)
+	echo powerpc64le-unknown-linux-${LIBC}
+	exit ;;
+    ppcle:Linux:*:*)
+	echo powerpcle-unknown-linux-${LIBC}
 	exit ;;
     s390:Linux:*:* | s390x:Linux:*:*)
-	echo ${UNAME_MACHINE}-ibm-linux
+	echo ${UNAME_MACHINE}-ibm-linux-${LIBC}
 	exit ;;
     sh64*:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
 	exit ;;
     sh*:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
 	exit ;;
     sparc:Linux:*:* | sparc64:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
 	exit ;;
     tile*:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
 	exit ;;
     vax:Linux:*:*)
-	echo ${UNAME_MACHINE}-dec-linux-gnu
+	echo ${UNAME_MACHINE}-dec-linux-${LIBC}
 	exit ;;
     x86_64:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
 	exit ;;
     xtensa*:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
 	exit ;;
     i*86:DYNIX/ptx:4*:*)
 	# ptx 4.0 does uname -s correctly, with DYNIX/ptx in there.
@@ -1201,6 +1227,9 @@ EOF
     BePC:Haiku:*:*)	# Haiku running on Intel PC compatible.
 	echo i586-pc-haiku
 	exit ;;
+    x86_64:Haiku:*:*)
+	echo x86_64-unknown-haiku
+	exit ;;
     SX-4:SUPER-UX:*:*)
 	echo sx4-nec-superux${UNAME_RELEASE}
 	exit ;;
@@ -1227,19 +1256,21 @@ EOF
 	exit ;;
     *:Darwin:*:*)
 	UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown
-	case $UNAME_PROCESSOR in
-	    i386)
 	eval $set_cc_for_build
+	if test "$UNAME_PROCESSOR" = unknown ; then
+	    UNAME_PROCESSOR=powerpc
+	fi
 	if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then
 	    if (echo '#ifdef __LP64__'; echo IS_64BIT_ARCH; echo '#endif') | \
 		(CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \
 		grep IS_64BIT_ARCH >/dev/null
 	    then
-		      UNAME_PROCESSOR="x86_64"
+		case $UNAME_PROCESSOR in
-		  fi
+		    i386) UNAME_PROCESSOR=x86_64 ;;
-		fi ;;
+		    powerpc) UNAME_PROCESSOR=powerpc64 ;;
-	    unknown) UNAME_PROCESSOR=powerpc ;;
 		esac
+	    fi
+	fi
 	echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE}
 	exit ;;
     *:procnto*:*:* | *:QNX:[0123456789]*:*)
@@ -1256,7 +1287,7 @@ EOF
     NEO-?:NONSTOP_KERNEL:*:*)
 	echo neo-tandem-nsk${UNAME_RELEASE}
 	exit ;;
-    NSE-?:NONSTOP_KERNEL:*:*)
+    NSE-*:NONSTOP_KERNEL:*:*)
 	echo nse-tandem-nsk${UNAME_RELEASE}
 	exit ;;
     NSR-?:NONSTOP_KERNEL:*:*)
@@ -1330,9 +1361,6 @@ EOF
 	exit ;;
 esac
 
-#echo '(No uname command or uname output not recognized.)' 1>&2
-#echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2
-
 eval $set_cc_for_build
 cat >$dummy.c <<EOF
 #ifdef _SEQUENT_

apps/lighttpd-1.4.32/config.h.in

@@ -405,9 +405,6 @@
    */
 #undef LT_OBJDIR
 
-/* Define to 1 if your C compiler doesn't accept -c and -o together. */
-#undef NO_MINUS_C_MINUS_O
-
 /* Name of package */
 #undef PACKAGE
 

apps/lighttpd-1.4.32/config.sub

@@ -1,24 +1,18 @@
 #! /bin/sh
 # Configuration validation subroutine script.
-#   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
+#   Copyright 1992-2013 Free Software Foundation, Inc.
-#   2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010,
-#   2011, 2012 Free Software Foundation, Inc.
 
-timestamp='2012-04-18'
+timestamp='2013-08-10'
 
-# This file is (in principle) common to ALL GNU software.
+# This file is free software; you can redistribute it and/or modify it
-# The presence of a machine in this file suggests that SOME GNU software
+# under the terms of the GNU General Public License as published by
-# can handle that machine.  It does not imply ALL GNU software can.
+# the Free Software Foundation; either version 3 of the License, or
-#
-# This file is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
 # (at your option) any later version.
 #
-# This program is distributed in the hope that it will be useful,
+# This program is distributed in the hope that it will be useful, but
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-# GNU General Public License for more details.
+# General Public License for more details.
 #
 # You should have received a copy of the GNU General Public License
 # along with this program; if not, see <http://www.gnu.org/licenses/>.
@@ -26,11 +20,12 @@ timestamp='2012-04-18'
 # As a special exception to the GNU General Public License, if you
 # distribute this file as part of a program that contains a
 # configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
+# the same distribution terms that you use for the rest of that
+# program.  This Exception is an additional permission under section 7
+# of the GNU General Public License, version 3 ("GPLv3").
 
 
-# Please send patches to <config-patches@gnu.org>.  Submit a context
+# Please send patches with a ChangeLog entry to config-patches@gnu.org.
-# diff and a properly formatted GNU ChangeLog entry.
 #
 # Configuration subroutine to validate and canonicalize a configuration type.
 # Supply the specified configuration type as an argument.
@@ -73,9 +68,7 @@ Report bugs and patches to <config-patches@gnu.org>."
 version="\
 GNU config.sub ($timestamp)
 
-Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000,
+Copyright 1992-2013 Free Software Foundation, Inc.
-2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
-Free Software Foundation, Inc.
 
 This is free software; see the source for copying conditions.  There is NO
 warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
@@ -123,7 +116,7 @@ esac
 maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'`
 case $maybe_os in
   nto-qnx* | linux-gnu* | linux-android* | linux-dietlibc | linux-newlib* | \
-  linux-uclibc* | uclinux-uclibc* | uclinux-gnu* | kfreebsd*-gnu* | \
+  linux-musl* | linux-uclibc* | uclinux-uclibc* | uclinux-gnu* | kfreebsd*-gnu* | \
   knetbsd*-gnu* | netbsd*-gnu* | \
   kopensolaris*-gnu* | \
   storm-chaos* | os2-emx* | rtmk-nova*)
@@ -156,7 +149,7 @@ case $os in
 	-convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\
 	-c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \
 	-harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \
-	-apple | -axis | -knuth | -cray | -microblaze)
+	-apple | -axis | -knuth | -cray | -microblaze*)
 		os=
 		basic_machine=$1
 		;;
@@ -259,10 +252,12 @@ case $basic_machine in
 	| alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \
 	| alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \
 	| am33_2.0 \
-	| arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr | avr32 \
+	| arc | arceb \
+	| arm | arm[bl]e | arme[lb] | armv[2-8] | armv[3-8][lb] | armv7[arm] \
+	| avr | avr32 \
 	| be32 | be64 \
 	| bfin \
-	| c4x | clipper \
+	| c4x | c8051 | clipper \
 	| d10v | d30v | dlx | dsp16xx \
 	| epiphany \
 	| fido | fr30 | frv \
@@ -273,7 +268,7 @@ case $basic_machine in
 	| le32 | le64 \
 	| lm32 \
 	| m32c | m32r | m32rle | m68000 | m68k | m88k \
-	| maxq | mb | microblaze | mcore | mep | metag \
+	| maxq | mb | microblaze | microblazeel | mcore | mep | metag \
 	| mips | mipsbe | mipseb | mipsel | mipsle \
 	| mips16 \
 	| mips64 | mips64el \
@@ -291,16 +286,17 @@ case $basic_machine in
 	| mipsisa64r2 | mipsisa64r2el \
 	| mipsisa64sb1 | mipsisa64sb1el \
 	| mipsisa64sr71k | mipsisa64sr71kel \
+	| mipsr5900 | mipsr5900el \
 	| mipstx39 | mipstx39el \
 	| mn10200 | mn10300 \
 	| moxie \
 	| mt \
 	| msp430 \
 	| nds32 | nds32le | nds32be \
-	| nios | nios2 \
+	| nios | nios2 | nios2eb | nios2el \
 	| ns16k | ns32k \
 	| open8 \
-	| or32 \
+	| or1k | or32 \
 	| pdp10 | pdp11 | pj | pjl \
 	| powerpc | powerpc64 | powerpc64le | powerpcle \
 	| pyramid \
@@ -370,13 +366,13 @@ case $basic_machine in
 	| aarch64-* | aarch64_be-* \
 	| alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \
 	| alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \
-	| alphapca5[67]-* | alpha64pca5[67]-* | arc-* \
+	| alphapca5[67]-* | alpha64pca5[67]-* | arc-* | arceb-* \
 	| arm-*  | armbe-* | armle-* | armeb-* | armv*-* \
 	| avr-* | avr32-* \
 	| be32-* | be64-* \
 	| bfin-* | bs2000-* \
 	| c[123]* | c30-* | [cjt]90-* | c4x-* \
-	| clipper-* | craynv-* | cydra-* \
+	| c8051-* | clipper-* | craynv-* | cydra-* \
 	| d10v-* | d30v-* | dlx-* \
 	| elxsi-* \
 	| f30[01]-* | f700-* | fido-* | fr30-* | frv-* | fx80-* \
@@ -389,7 +385,8 @@ case $basic_machine in
 	| lm32-* \
 	| m32c-* | m32r-* | m32rle-* \
 	| m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \
-	| m88110-* | m88k-* | maxq-* | mcore-* | metag-* | microblaze-* \
+	| m88110-* | m88k-* | maxq-* | mcore-* | metag-* \
+	| microblaze-* | microblazeel-* \
 	| mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \
 	| mips16-* \
 	| mips64-* | mips64el-* \
@@ -407,12 +404,13 @@ case $basic_machine in
 	| mipsisa64r2-* | mipsisa64r2el-* \
 	| mipsisa64sb1-* | mipsisa64sb1el-* \
 	| mipsisa64sr71k-* | mipsisa64sr71kel-* \
+	| mipsr5900-* | mipsr5900el-* \
 	| mipstx39-* | mipstx39el-* \
 	| mmix-* \
 	| mt-* \
 	| msp430-* \
 	| nds32-* | nds32le-* | nds32be-* \
-	| nios-* | nios2-* \
+	| nios-* | nios2-* | nios2eb-* | nios2el-* \
 	| none-* | np1-* | ns16k-* | ns32k-* \
 	| open8-* \
 	| orion-* \
@@ -788,11 +786,15 @@ case $basic_machine in
 		basic_machine=ns32k-utek
 		os=-sysv
 		;;
-	microblaze)
+	microblaze*)
 		basic_machine=microblaze-xilinx
 		;;
+	mingw64)
+		basic_machine=x86_64-pc
+		os=-mingw64
+		;;
 	mingw32)
-		basic_machine=i386-pc
+		basic_machine=i686-pc
 		os=-mingw32
 		;;
 	mingw32ce)
@@ -828,7 +830,7 @@ case $basic_machine in
 		basic_machine=`echo $basic_machine | sed -e 's/ms1-/mt-/'`
 		;;
 	msys)
-		basic_machine=i386-pc
+		basic_machine=i686-pc
 		os=-msys
 		;;
 	mvs)
@@ -1019,7 +1021,11 @@ case $basic_machine in
 		basic_machine=i586-unknown
 		os=-pw32
 		;;
-	rdos)
+	rdos | rdos64)
+		basic_machine=x86_64-pc
+		os=-rdos
+		;;
+	rdos32)
 		basic_machine=i386-pc
 		os=-rdos
 		;;
@@ -1346,21 +1352,21 @@ case $os in
 	-gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \
 	      | -*vms* | -sco* | -esix* | -isc* | -aix* | -cnk* | -sunos | -sunos[34]*\
 	      | -hpux* | -unos* | -osf* | -luna* | -dgux* | -auroraux* | -solaris* \
-	      | -sym* | -kopensolaris* \
+	      | -sym* | -kopensolaris* | -plan9* \
 	      | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \
 	      | -aos* | -aros* \
 	      | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \
 	      | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \
 	      | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* \
-	      | -openbsd* | -solidbsd* \
+	      | -bitrig* | -openbsd* | -solidbsd* \
 	      | -ekkobsd* | -kfreebsd* | -freebsd* | -riscix* | -lynxos* \
 	      | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \
 	      | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \
 	      | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \
 	      | -chorusos* | -chorusrdb* | -cegcc* \
 	      | -cygwin* | -msys* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
-	      | -mingw32* | -linux-gnu* | -linux-android* \
+	      | -mingw32* | -mingw64* | -linux-gnu* | -linux-android* \
-	      | -linux-newlib* | -linux-uclibc* \
+	      | -linux-newlib* | -linux-musl* | -linux-uclibc* \
 	      | -uxpv* | -beos* | -mpeix* | -udk* \
 	      | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \
 	      | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \
@@ -1492,9 +1498,6 @@ case $os in
 	-aros*)
 		os=-aros
 		;;
-	-kaos*)
-		os=-kaos
-		;;
 	-zvmoe)
 		os=-zvmoe
 		;;
@@ -1543,6 +1546,9 @@ case $basic_machine in
 	c4x-* | tic4x-*)
 		os=-coff
 		;;
+	c8051-*)
+		os=-elf
+		;;
 	hexagon-*)
 		os=-elf
 		;;
@@ -1586,6 +1592,9 @@ case $basic_machine in
 	mips*-*)
 		os=-elf
 		;;
+	or1k-*)
+		os=-elf
+		;;
 	or32-*)
 		os=-coff
 		;;

apps/lighttpd-1.4.32/configure

@@ -832,6 +832,7 @@ enable_multithreading
 with_libmtcp
 with_libpsio
 with_libdpdk
+enable_netmap
 '
       ac_precious_vars='build_alias
 host_alias
@@ -1474,10 +1475,12 @@ Optional Features:
   --disable-option-checking  ignore unrecognized --enable/--with options
   --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
   --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
-  --enable-silent-rules          less verbose build output (undo: `make V=1')
+  --enable-silent-rules   less verbose build output (undo: "make V=1")
-  --disable-silent-rules         verbose build output (undo: `make V=0')
+  --disable-silent-rules  verbose build output (undo: "make V=0")
-  --disable-dependency-tracking  speeds up one-time build
+  --enable-dependency-tracking
-  --enable-dependency-tracking   do not reject slow dependency extractors
+                          do not reject slow dependency extractors
+  --disable-dependency-tracking
+                          speeds up one-time build
   --enable-static[=PKGS]  build static libraries [default=no]
   --enable-shared[=PKGS]  build shared libraries [default=yes]
   --enable-fast-install[=PKGS]
@@ -1489,6 +1492,7 @@ Optional Features:
                           to trigger SIGBUS crashes)
   --enable-extra-warnings enable extra warnings (gcc specific)
   --enable-multithreading enable posix multi-threading support
+  --enable-netmap         Turn on Netmap support
 
 Optional Packages:
   --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
@@ -2772,7 +2776,7 @@ test -n "$target_alias" &&
     NONENONEs,x,x, &&
   program_prefix=${target_alias}-
 
-am__api_version='1.11'
+am__api_version='1.14'
 
 # Find a good install program.  We prefer a C program (faster),
 # so one script is as good as another.  But avoid the broken or
@@ -2869,9 +2873,6 @@ test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
 
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether build environment is sane" >&5
 $as_echo_n "checking whether build environment is sane... " >&6; }
-# Just in case
-sleep 1
-echo timestamp > conftest.file
 # Reject unsafe characters in $srcdir or the absolute working directory
 # name.  Accept space and tab only in the latter.
 am_lf='
@@ -2882,21 +2883,23 @@ case `pwd` in
 esac
 case $srcdir in
   *[\\\"\#\$\&\'\`$am_lf\ \	]*)
-    as_fn_error $? "unsafe srcdir value: \`$srcdir'" "$LINENO" 5;;
+    as_fn_error $? "unsafe srcdir value: '$srcdir'" "$LINENO" 5;;
 esac
 
-# Do `set' in a subshell so we don't clobber the current shell's
+# Do 'set' in a subshell so we don't clobber the current shell's
 # arguments.  Must try -L first in case configure is actually a
 # symlink; some systems play weird games with the mod time of symlinks
 # (eg FreeBSD returns the mod time of the symlink's containing
 # directory).
 if (
+   am_has_slept=no
+   for am_try in 1 2; do
+     echo "timestamp, slept: $am_has_slept" > conftest.file
      set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
      if test "$*" = "X"; then
 	# -L didn't work.
 	set X `ls -t "$srcdir/configure" conftest.file`
      fi
-   rm -f conftest.file
      if test "$*" != "X $srcdir/configure conftest.file" \
 	&& test "$*" != "X conftest.file $srcdir/configure"; then
 
@@ -2905,9 +2908,15 @@ if (
 	# broken ls alias from the environment.  This has actually
 	# happened.  Such a system could not be considered "sane".
 	as_fn_error $? "ls -t appears to fail.  Make sure there is not a broken
-alias in your environment" "$LINENO" 5
+  alias in your environment" "$LINENO" 5
      fi
-
+     if test "$2" = conftest.file || test $am_try -eq 2; then
+       break
+     fi
+     # Just in case.
+     sleep 1
+     am_has_slept=yes
+   done
    test "$2" = conftest.file
    )
 then
@@ -2919,6 +2928,16 @@ Check your system clock" "$LINENO" 5
 fi
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
 $as_echo "yes" >&6; }
+# If we didn't sleep, we still need to ensure time stamps of config.status and
+# generated files are strictly newer.
+am_sleep_pid=
+if grep 'slept: no' conftest.file >/dev/null 2>&1; then
+  ( sleep 1 ) &
+  am_sleep_pid=$!
+fi
+
+rm -f conftest.file
+
 test "$program_prefix" != NONE &&
   program_transform_name="s&^&$program_prefix&;$program_transform_name"
 # Use a double $ so make ignores it.
@@ -2941,12 +2960,12 @@ if test x"${MISSING+set}" != xset; then
   esac
 fi
 # Use eval to expand $SHELL
-if eval "$MISSING --run true"; then
+if eval "$MISSING --is-lightweight"; then
-  am_missing_run="$MISSING --run "
+  am_missing_run="$MISSING "
 else
   am_missing_run=
-  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`missing' script is too old or missing" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: 'missing' script is too old or missing" >&5
-$as_echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;}
+$as_echo "$as_me: WARNING: 'missing' script is too old or missing" >&2;}
 fi
 
 if test x"${install_sh}" != xset; then
@@ -2958,10 +2977,10 @@ if test x"${install_sh}" != xset; then
   esac
 fi
 
-# Installed binaries are usually stripped using `strip' when the user
+# Installed binaries are usually stripped using 'strip' when the user
-# run `make install-strip'.  However `strip' might not be the right
+# run "make install-strip".  However 'strip' might not be the right
 # tool to use in cross-compilation environments, therefore Automake
-# will honor the `STRIP' environment variable to overrule this program.
+# will honor the 'STRIP' environment variable to overrule this program.
 if test "$cross_compiling" != no; then
   if test -n "$ac_tool_prefix"; then
   # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
@@ -3100,12 +3119,6 @@ fi
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MKDIR_P" >&5
 $as_echo "$MKDIR_P" >&6; }
 
-mkdir_p="$MKDIR_P"
-case $mkdir_p in
-  [\\/$]* | ?:[\\/]*) ;;
-  */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;;
-esac
-
 for ac_prog in gawk mawk nawk awk
 do
   # Extract the first word of "$ac_prog", so it can be a program name with args.
@@ -3188,6 +3201,45 @@ else
 fi
 rmdir .tst 2>/dev/null
 
+# Check whether --enable-silent-rules was given.
+if test "${enable_silent_rules+set}" = set; then :
+  enableval=$enable_silent_rules;
+fi
+
+case $enable_silent_rules in # (((
+  yes) AM_DEFAULT_VERBOSITY=0;;
+   no) AM_DEFAULT_VERBOSITY=1;;
+    *) AM_DEFAULT_VERBOSITY=1;;
+esac
+am_make=${MAKE-make}
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $am_make supports nested variables" >&5
+$as_echo_n "checking whether $am_make supports nested variables... " >&6; }
+if ${am_cv_make_support_nested_variables+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if $as_echo 'TRUE=$(BAR$(V))
+BAR0=false
+BAR1=true
+V=1
+am__doit:
+	@$(TRUE)
+.PHONY: am__doit' | $am_make -f - >/dev/null 2>&1; then
+  am_cv_make_support_nested_variables=yes
+else
+  am_cv_make_support_nested_variables=no
+fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_make_support_nested_variables" >&5
+$as_echo "$am_cv_make_support_nested_variables" >&6; }
+if test $am_cv_make_support_nested_variables = yes; then
+    AM_V='$(V)'
+  AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)'
+else
+  AM_V=$AM_DEFAULT_VERBOSITY
+  AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY
+fi
+AM_BACKSLASH='\'
+
 if test "`cd $srcdir && pwd`" != "`pwd`"; then
   # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
   # is not polluted with repeated "-I."
@@ -3238,6 +3290,12 @@ AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"}
 
 MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"}
 
+# For better backward compatibility.  To be removed once Automake 1.9.x
+# dies out for good.  For more background, see:
+# <http://lists.gnu.org/archive/html/automake/2012-07/msg00001.html>
+# <http://lists.gnu.org/archive/html/automake/2012-07/msg00014.html>
+mkdir_p='$(MKDIR_P)'
+
 # We need awk for the "check" target.  The system "awk" is bad on
 # some platforms.
 # Always define AMTAR for backward compatibility.  Yes, it's still used
@@ -3245,19 +3303,53 @@ MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"}
 AMTAR='$${TAR-tar}'
 
 
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to create a ustar tar archive" >&5
+# We'll loop over all known methods to create a tar archive until one works.
-$as_echo_n "checking how to create a ustar tar archive... " >&6; }
-# Loop over all known methods to create a tar archive until one works.
 _am_tools='gnutar plaintar pax cpio none'
-_am_tools=${am_cv_prog_tar_ustar-$_am_tools}
+
-# Do not fold the above two line into one, because Tru64 sh and
+# The POSIX 1988 'ustar' format is defined with fixed-size fields.
-# Solaris sh will not grok spaces in the rhs of `-'.
+      # There is notably a 21 bits limit for the UID and the GID.  In fact,
-for _am_tool in $_am_tools
+      # the 'pax' utility can hang on bigger UID/GID (see automake bug#8343
-do
+      # and bug#13588).
+      am_max_uid=2097151 # 2^21 - 1
+      am_max_gid=$am_max_uid
+      # The $UID and $GID variables are not portable, so we need to resort
+      # to the POSIX-mandated id(1) utility.  Errors in the 'id' calls
+      # below are definitely unexpected, so allow the users to see them
+      # (that is, avoid stderr redirection).
+      am_uid=`id -u || echo unknown`
+      am_gid=`id -g || echo unknown`
+      { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether UID '$am_uid' is supported by ustar format" >&5
+$as_echo_n "checking whether UID '$am_uid' is supported by ustar format... " >&6; }
+      if test $am_uid -le $am_max_uid; then
+         { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+      else
+         { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+         _am_tools=none
+      fi
+      { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether GID '$am_gid' is supported by ustar format" >&5
+$as_echo_n "checking whether GID '$am_gid' is supported by ustar format... " >&6; }
+      if test $am_gid -le $am_max_gid; then
+         { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+      else
+        { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+        _am_tools=none
+      fi
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to create a ustar tar archive" >&5
+$as_echo_n "checking how to create a ustar tar archive... " >&6; }
+
+  # Go ahead even if we have the value already cached.  We do so because we
+  # need to set the values for the 'am__tar' and 'am__untar' variables.
+  _am_tools=${am_cv_prog_tar_ustar-$_am_tools}
+
+  for _am_tool in $_am_tools; do
     case $_am_tool in
     gnutar)
-    for _am_tar in tar gnutar gtar;
+      for _am_tar in tar gnutar gtar; do
-    do
         { echo "$as_me:$LINENO: $_am_tar --version" >&5
    ($_am_tar --version) >&5 2>&5
    ac_status=$?
@@ -3297,7 +3389,7 @@ do
     # and am__untar set.
     test -n "${am_cv_prog_tar_ustar}" && break
 
-  # tar/untar a dummy directory, and stop if the command works
+    # tar/untar a dummy directory, and stop if the command works.
     rm -rf conftest.dir
     mkdir conftest.dir
     echo GrepMe > conftest.dir/file
@@ -3312,19 +3404,24 @@ do
    ($am__untar <conftest.tar) >&5 2>&5
    ac_status=$?
    echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   (exit $ac_status); }
+      { echo "$as_me:$LINENO: cat conftest.dir/file" >&5
+   (cat conftest.dir/file) >&5 2>&5
+   ac_status=$?
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
    (exit $ac_status); }
       grep GrepMe conftest.dir/file >/dev/null 2>&1 && break
     fi
-done
+  done
-rm -rf conftest.dir
+  rm -rf conftest.dir
 
-if ${am_cv_prog_tar_ustar+:} false; then :
+  if ${am_cv_prog_tar_ustar+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   am_cv_prog_tar_ustar=$_am_tool
 fi
 
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_prog_tar_ustar" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_prog_tar_ustar" >&5
 $as_echo "$am_cv_prog_tar_ustar" >&6; }
 
 
@@ -3332,15 +3429,57 @@ $as_echo "$am_cv_prog_tar_ustar" >&6; }
 
 
 
+# POSIX will say in a future version that running "rm -f" with no argument
+# is OK; and we want to be able to make that assumption in our Makefile
+# recipes.  So use an aggressive probe to check that the usage we want is
+# actually supported "in the wild" to an acceptable degree.
+# See automake bug#10828.
+# To make any issue more visible, cause the running configure to be aborted
+# by default if the 'rm' program in use doesn't match our expectations; the
+# user can still override this though.
+if rm -f && rm -fr && rm -rf; then : OK; else
+  cat >&2 <<'END'
+Oops!
+
+Your 'rm' program seems unable to run without file operands specified
+on the command line, even when the '-f' option is present.  This is contrary
+to the behaviour of most rm programs out there, and not conforming with
+the upcoming POSIX standard: <http://austingroupbugs.net/view.php?id=542>
+
+Please tell bug-automake@gnu.org about your system, including the value
+of your $PATH and any error possibly output before this message.  This
+can help us improve future automake versions.
+
+END
+  if test x"$ACCEPT_INFERIOR_RM_PROGRAM" = x"yes"; then
+    echo 'Configuration will proceed anyway, since you have set the' >&2
+    echo 'ACCEPT_INFERIOR_RM_PROGRAM variable to "yes"' >&2
+    echo >&2
+  else
+    cat >&2 <<'END'
+Aborting the configuration process, to ensure you take notice of the issue.
+
+You can download and install GNU coreutils to get an 'rm' implementation
+that behaves properly: <http://www.gnu.org/software/coreutils/>.
+
+If you want to complete the configuration process using your problematic
+'rm' anyway, export the environment variable ACCEPT_INFERIOR_RM_PROGRAM
+to "yes", and re-run configure.
+
+END
+    as_fn_error $? "Your 'rm' program is bad, sorry." "$LINENO" 5
+  fi
+fi
+
 # Check whether --enable-silent-rules was given.
 if test "${enable_silent_rules+set}" = set; then :
   enableval=$enable_silent_rules;
 fi
 
-case $enable_silent_rules in
+case $enable_silent_rules in # (((
-yes) AM_DEFAULT_VERBOSITY=0;;
+  yes) AM_DEFAULT_VERBOSITY=0;;
-no)  AM_DEFAULT_VERBOSITY=1;;
+   no) AM_DEFAULT_VERBOSITY=1;;
-*)   AM_DEFAULT_VERBOSITY=1;;
+    *) AM_DEFAULT_VERBOSITY=1;;
 esac
 am_make=${MAKE-make}
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $am_make supports nested variables" >&5
@@ -4160,6 +4299,65 @@ ac_cpp='$CPP $CPPFLAGS'
 ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
 ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
 ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC understands -c and -o together" >&5
+$as_echo_n "checking whether $CC understands -c and -o together... " >&6; }
+if ${am_cv_prog_cc_c_o+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+  # Make sure it works both with $CC and with simple cc.
+  # Following AC_PROG_CC_C_O, we do the test twice because some
+  # compilers refuse to overwrite an existing .o file with -o,
+  # though they will create one.
+  am_cv_prog_cc_c_o=yes
+  for am_i in 1 2; do
+    if { echo "$as_me:$LINENO: $CC -c conftest.$ac_ext -o conftest2.$ac_objext" >&5
+   ($CC -c conftest.$ac_ext -o conftest2.$ac_objext) >&5 2>&5
+   ac_status=$?
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   (exit $ac_status); } \
+         && test -f conftest2.$ac_objext; then
+      : OK
+    else
+      am_cv_prog_cc_c_o=no
+      break
+    fi
+  done
+  rm -f core conftest*
+  unset am_i
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_prog_cc_c_o" >&5
+$as_echo "$am_cv_prog_cc_c_o" >&6; }
+if test "$am_cv_prog_cc_c_o" != yes; then
+   # Losing compiler, so override with the script.
+   # FIXME: It is wrong to rewrite CC.
+   # But if we don't then we get into trouble of one sort or another.
+   # A longer-term fix would be to have automake use am__CC in this case,
+   # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)"
+   CC="$am_aux_dir/compile $CC"
+fi
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
 DEPDIR="${am__leading_dot}deps"
 
 ac_config_commands="$ac_config_commands depfiles"
@@ -4179,7 +4377,7 @@ am__quote=
 _am_result=none
 # First try GNU make style include.
 echo "include confinc" > confmf
-# Ignore all kinds of additional output from `make'.
+# Ignore all kinds of additional output from 'make'.
 case `$am_make -s -f confmf 2> /dev/null` in #(
 *the\ am__doit\ target*)
   am__include=include
@@ -4235,8 +4433,8 @@ else
   # We make a subdir and do the tests there.  Otherwise we can end up
   # making bogus files that we don't know about and never remove.  For
   # instance it was reported that on HP-UX the gcc test will end up
-  # making a dummy file named `D' -- because `-MD' means `put the output
+  # making a dummy file named 'D' -- because '-MD' means "put the output
-  # in D'.
+  # in D".
   rm -rf conftest.dir
   mkdir conftest.dir
   # Copy depcomp to subdir because otherwise we won't find it if we're
@@ -4271,16 +4469,16 @@ else
     : > sub/conftest.c
     for i in 1 2 3 4 5 6; do
       echo '#include "conftst'$i'.h"' >> sub/conftest.c
-      # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
+      # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with
-      # Solaris 8's {/usr,}/bin/sh.
+      # Solaris 10 /bin/sh.
-      touch sub/conftst$i.h
+      echo '/* dummy */' > sub/conftst$i.h
     done
     echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
 
-    # We check with `-c' and `-o' for the sake of the "dashmstdout"
+    # We check with '-c' and '-o' for the sake of the "dashmstdout"
     # mode.  It turns out that the SunPro C++ compiler does not properly
-    # handle `-M -o', and we need to detect this.  Also, some Intel
+    # handle '-M -o', and we need to detect this.  Also, some Intel
-    # versions had trouble with output in subdirs
+    # versions had trouble with output in subdirs.
     am__obj=sub/conftest.${OBJEXT-o}
     am__minus_obj="-o $am__obj"
     case $depmode in
@@ -4289,8 +4487,8 @@ else
       test "$am__universal" = false || continue
       ;;
     nosideeffect)
-      # after this tag, mechanisms are not by side-effect, so they'll
+      # After this tag, mechanisms are not by side-effect, so they'll
-      # only be used when explicitly requested
+      # only be used when explicitly requested.
       if test "x$enable_dependency_tracking" = xyes; then
 	continue
       else
@@ -4298,7 +4496,7 @@ else
       fi
       ;;
     msvc7 | msvc7msys | msvisualcpp | msvcmsys)
-      # This compiler won't grok `-c -o', but also, the minuso test has
+      # This compiler won't grok '-c -o', but also, the minuso test has
       # not run yet.  These depmodes are late enough in the game, and
       # so weak that their functioning should not be impacted.
       am__obj=conftest.${OBJEXT-o}
@@ -4352,131 +4550,6 @@ else
 fi
 
 
-if test "x$CC" != xcc; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC and cc understand -c and -o together" >&5
-$as_echo_n "checking whether $CC and cc understand -c and -o together... " >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether cc understands -c and -o together" >&5
-$as_echo_n "checking whether cc understands -c and -o together... " >&6; }
-fi
-set dummy $CC; ac_cc=`$as_echo "$2" |
-		      sed 's/[^a-zA-Z0-9_]/_/g;s/^[0-9]/_/'`
-if eval \${ac_cv_prog_cc_${ac_cc}_c_o+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-# Make sure it works both with $CC and with simple cc.
-# We do the test twice because some compilers refuse to overwrite an
-# existing .o file with -o, though they will create one.
-ac_try='$CC -c conftest.$ac_ext -o conftest2.$ac_objext >&5'
-rm -f conftest2.*
-if { { case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-  test $ac_status = 0; } &&
-   test -f conftest2.$ac_objext && { { case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-  test $ac_status = 0; };
-then
-  eval ac_cv_prog_cc_${ac_cc}_c_o=yes
-  if test "x$CC" != xcc; then
-    # Test first that cc exists at all.
-    if { ac_try='cc -c conftest.$ac_ext >&5'
-  { { case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-  test $ac_status = 0; }; }; then
-      ac_try='cc -c conftest.$ac_ext -o conftest2.$ac_objext >&5'
-      rm -f conftest2.*
-      if { { case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-  test $ac_status = 0; } &&
-	 test -f conftest2.$ac_objext && { { case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-  test $ac_status = 0; };
-      then
-	# cc works too.
-	:
-      else
-	# cc exists but doesn't like -o.
-	eval ac_cv_prog_cc_${ac_cc}_c_o=no
-      fi
-    fi
-  fi
-else
-  eval ac_cv_prog_cc_${ac_cc}_c_o=no
-fi
-rm -f core conftest*
-
-fi
-if eval test \$ac_cv_prog_cc_${ac_cc}_c_o = yes; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-
-$as_echo "#define NO_MINUS_C_MINUS_O 1" >>confdefs.h
-
-fi
-
-# FIXME: we rely on the cache variable name because
-# there is no other way.
-set dummy $CC
-am_cc=`echo $2 | sed 's/[^a-zA-Z0-9_]/_/g;s/^[0-9]/_/'`
-eval am_t=\$ac_cv_prog_cc_${am_cc}_c_o
-if test "$am_t" != yes; then
-   # Losing compiler, so override with the script.
-   # FIXME: It is wrong to rewrite CC.
-   # But if we don't then we get into trouble of one sort or another.
-   # A longer-term fix would be to have automake use am__CC in this case,
-   # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)"
-   CC="$am_aux_dir/compile $CC"
-fi
-
 
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for a sed that does not truncate output" >&5
 $as_echo_n "checking for a sed that does not truncate output... " >&6; }
@@ -5462,6 +5535,12 @@ $as_echo_n "checking the archiver ($AR) interface... " >&6; }
 if ${am_cv_ar_interface+:} false; then :
   $as_echo_n "(cached) " >&6
 else
+  ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
    am_cv_ar_interface=ar
    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
@@ -5493,6 +5572,11 @@ if ac_fn_c_try_compile "$LINENO"; then :
 
 fi
 rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+   ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
 
 fi
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_ar_interface" >&5
@@ -5998,7 +6082,8 @@ else
     ;;
   *)
     lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null`
-    if test -n "$lt_cv_sys_max_cmd_len"; then
+    if test -n "$lt_cv_sys_max_cmd_len" && \
+	test undefined != "$lt_cv_sys_max_cmd_len"; then
       lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
       lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
     else
@@ -7518,7 +7603,7 @@ ia64-*-hpux*)
   rm -rf conftest*
   ;;
 
-x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \
+x86_64-*kfreebsd*-gnu|x86_64-*linux*|powerpc*-*linux*| \
 s390*-*linux*|s390*-*tpf*|sparc*-*linux*)
   # Find out which ABI we are using.
   echo 'int i;' > conftest.$ac_ext
@@ -7534,9 +7619,19 @@ s390*-*linux*|s390*-*tpf*|sparc*-*linux*)
 	    LD="${LD-ld} -m elf_i386_fbsd"
 	    ;;
 	  x86_64-*linux*)
+	    case `/usr/bin/file conftest.o` in
+	      *x86-64*)
+		LD="${LD-ld} -m elf32_x86_64"
+		;;
+	      *)
 		LD="${LD-ld} -m elf_i386"
 		;;
-	  ppc64-*linux*|powerpc64-*linux*)
+	    esac
+	    ;;
+	  powerpc64le-*)
+	    LD="${LD-ld} -m elf32lppclinux"
+	    ;;
+	  powerpc64-*)
 	    LD="${LD-ld} -m elf32ppclinux"
 	    ;;
 	  s390x-*linux*)
@@ -7555,7 +7650,10 @@ s390*-*linux*|s390*-*tpf*|sparc*-*linux*)
 	  x86_64-*linux*)
 	    LD="${LD-ld} -m elf_x86_64"
 	    ;;
-	  ppc*-*linux*|powerpc*-*linux*)
+	  powerpcle-*)
+	    LD="${LD-ld} -m elf64lppc"
+	    ;;
+	  powerpc-*)
 	    LD="${LD-ld} -m elf64ppc"
 	    ;;
 	  s390*-*linux*|s390*-*tpf*)
@@ -16449,7 +16547,8 @@ LIBDPDK_LIBS=""
 
 if test "$WITH_LIBDPDK" != "no"; then
 	LIBDPDK_CFLAGS="-I$WITH_LIBDPDK/include/"
-	LIBDPDK_LIBS="-L$WITH_LIBDPDK/lib/ -m64 -g -O3 -pthread -lrt -march=native -Wl,-export-dynamic -Wl,-lnuma -Wl,-lpthread -Wl,-lrt -Wl,-ldl -Wl,--whole-archive -Wl,-lrte_distributor -Wl,-lrte_kni -Wl,-lrte_pipeline -Wl,-lrte_table -Wl,-lrte_port -Wl,-lrte_timer -Wl,-lrte_hash -Wl,-lrte_lpm -Wl,-lrte_power -Wl,-lrte_acl -Wl,-lrte_meter -Wl,-lrte_sched -Wl,-lm -Wl,-lrt -Wl,--start-group -Wl,-lrte_kvargs -Wl,-lrte_mbuf -Wl,-lrte_ip_frag -Wl,-lethdev -Wl,-lrte_mempool -Wl,-lrte_ring -Wl,-lrte_eal -Wl,-lrte_cmdline -Wl,-lrte_cfgfile -Wl,-lrte_pmd_bond -Wl,-lrte_pmd_virtio -Wl,-lrte_pmd_vmxnet3_uio -Wl,-lrte_pmd_i40e -Wl,-lrte_pmd_ixgbe -Wl,-lrte_pmd_e1000 -Wl,-lrte_pmd_ring -Wl,-lrt -Wl,-lm -Wl,-ldl -Wl,--end-group -Wl,--no-whole-archive"
+	LIBDPDK_LDFLAGS=`cat $WITH_LIBDPDK/lib/ldflags.txt`
+	LIBDPDK_LIBS="-L$WITH_LIBDPDK/lib/ -m64 -g -O3 -pthread -lrt -march=native -Wl,-export-dynamic -Wl,-lnuma -Wl,-lpthread -Wl,-lrt -Wl,-ldl -Wl,$LIBDPDK_LDFLAGS"
 	CFLAGS="${CFLAGS} ${LIBDPDK_CFLAGS}"
 
 $as_echo "#define HAVE_LIBDPDK 1" >>confdefs.h
@@ -16464,6 +16563,24 @@ fi
 
 
 
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for netmap support" >&5
+$as_echo_n "checking for netmap support... " >&6; }
+# Check whether --enable-netmap was given.
+if test "${enable_netmap+set}" = set; then :
+  enableval=$enable_netmap; case "${enableval}" in
+   yes) CFLAGS="${CFLAGS} -DHAVE_NETMAP";;
+    no) ;;
+     *) as_fn_error $? "bad value ${enableval} for --enable-lfs" "$LINENO" 5 ;;
+  esac
+else
+  CFLAGS="${CFLAGS}"
+	 enable_netmap=no
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $enableval" >&5
+$as_echo "$enableval" >&6; }
+
 LIGHTTPD_VERSION_ID=`echo $PACKAGE_VERSION | $AWK -F '.' '{print "(" $1 " << 16 | " $2 " << 8 | " $3 ")"}'`
 
 cat >>confdefs.h <<_ACEOF
@@ -16582,6 +16699,14 @@ LIBOBJS=$ac_libobjs
 LTLIBOBJS=$ac_ltlibobjs
 
 
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking that generated files are newer than configure" >&5
+$as_echo_n "checking that generated files are newer than configure... " >&6; }
+   if test -n "$am_sleep_pid"; then
+     # Hide warnings about reused PIDs.
+     wait $am_sleep_pid 2>/dev/null
+   fi
+   { $as_echo "$as_me:${as_lineno-$LINENO}: result: done" >&5
+$as_echo "done" >&6; }
  if test -n "$EXEEXT"; then
   am__EXEEXT_TRUE=
   am__EXEEXT_FALSE='#'
@@ -18096,7 +18221,7 @@ $as_echo "$as_me: executing $ac_file commands" >&6;}
 
   case $ac_file$ac_mode in
     "depfiles":C) test x"$AMDEP_TRUE" != x"" || {
-  # Autoconf 2.62 quotes --file arguments for eval, but not when files
+  # Older Autoconf quotes --file arguments for eval, but not when files
   # are listed without --file.  Let's play safe and only enable the eval
   # if we detect the quoting.
   case $CONFIG_FILES in
@@ -18109,7 +18234,7 @@ $as_echo "$as_me: executing $ac_file commands" >&6;}
     # Strip MF so we end up with the name of the file.
     mf=`echo "$mf" | sed -e 's/:.*$//'`
     # Check whether this is an Automake generated Makefile or not.
-    # We used to match only the files named `Makefile.in', but
+    # We used to match only the files named 'Makefile.in', but
     # some people rename them; so instead we look at the file content.
     # Grep'ing the first line is not enough: some people post-process
     # each Makefile.in and add a new line on top of each file to say so.
@@ -18143,21 +18268,19 @@ $as_echo X"$mf" |
       continue
     fi
     # Extract the definition of DEPDIR, am__include, and am__quote
-    # from the Makefile without running `make'.
+    # from the Makefile without running 'make'.
     DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
     test -z "$DEPDIR" && continue
     am__include=`sed -n 's/^am__include = //p' < "$mf"`
-    test -z "am__include" && continue
+    test -z "$am__include" && continue
     am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
-    # When using ansi2knr, U may be empty or an underscore; expand it
-    U=`sed -n 's/^U = //p' < "$mf"`
     # Find all dependency output files, they are included files with
     # $(DEPDIR) in their names.  We invoke sed twice because it is the
     # simplest approach to changing $(DEPDIR) to its actual value in the
     # expansion.
     for file in `sed -n "
       s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
-	 sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
+	 sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g'`; do
       # Make sure the directory exists.
       test -f "$dirpart/$file" && continue
       fdir=`$as_dirname -- "$file" ||

apps/lighttpd-1.4.32/configure.ac

@@ -689,7 +689,8 @@ LIBDPDK_LIBS=""
 
 if test "$WITH_LIBDPDK" != "no"; then
 	LIBDPDK_CFLAGS="-I$WITH_LIBDPDK/include/"
-	LIBDPDK_LIBS="-L$WITH_LIBDPDK/lib/ -m64 -g -O3 -pthread -lrt -march=native -Wl,-export-dynamic -Wl,-lnuma -Wl,-lpthread -Wl,-lrt -Wl,-ldl -Wl,--whole-archive -Wl,-lrte_distributor -Wl,-lrte_kni -Wl,-lrte_pipeline -Wl,-lrte_table -Wl,-lrte_port -Wl,-lrte_timer -Wl,-lrte_hash -Wl,-lrte_lpm -Wl,-lrte_power -Wl,-lrte_acl -Wl,-lrte_meter -Wl,-lrte_sched -Wl,-lm -Wl,-lrt -Wl,--start-group -Wl,-lrte_kvargs -Wl,-lrte_mbuf -Wl,-lrte_ip_frag -Wl,-lethdev -Wl,-lrte_mempool -Wl,-lrte_ring -Wl,-lrte_eal -Wl,-lrte_cmdline -Wl,-lrte_cfgfile -Wl,-lrte_pmd_bond -Wl,-lrte_pmd_virtio -Wl,-lrte_pmd_vmxnet3_uio -Wl,-lrte_pmd_i40e -Wl,-lrte_pmd_ixgbe -Wl,-lrte_pmd_e1000 -Wl,-lrte_pmd_ring -Wl,-lrt -Wl,-lm -Wl,-ldl -Wl,--end-group -Wl,--no-whole-archive"
+	LIBDPDK_LDFLAGS=`cat $WITH_LIBDPDK/lib/ldflags.txt`
+	LIBDPDK_LIBS="-L$WITH_LIBDPDK/lib/ -m64 -g -O3 -pthread -lrt -march=native -Wl,-export-dynamic -Wl,-lnuma -Wl,-lpthread -Wl,-lrt -Wl,-ldl -Wl,$LIBDPDK_LDFLAGS"
 	CFLAGS="${CFLAGS} ${LIBDPDK_CFLAGS}"
 	AC_DEFINE([HAVE_LIBDPDK], [1], [libdpdk support])
 	AC_MSG_RESULT(yes)
@@ -700,6 +701,18 @@ fi
 AC_SUBST(LIBDPDK_CFLAGS)
 AC_SUBST(LIBDPDK_LIBS)
 
+
+AC_MSG_CHECKING(for netmap support)
+AC_ARG_ENABLE(netmap,
+ AC_HELP_STRING([--enable-netmap],[Turn on Netmap support]),
+ [case "${enableval}" in
+   yes) CFLAGS="${CFLAGS} -DHAVE_NETMAP";;
+    no) ;;
+     *) AC_MSG_ERROR(bad value ${enableval} for --enable-lfs) ;;
+  esac],[CFLAGS="${CFLAGS}"
+	 enable_netmap=no])
+AC_MSG_RESULT($enableval)    
+
 dnl build version-id
 LIGHTTPD_VERSION_ID=`echo $PACKAGE_VERSION | $AWK -F '.' '{print "(" $1 " << 16 | " $2 " << 8 | " $3 ")"}'`
 AC_DEFINE_UNQUOTED([LIGHTTPD_VERSION_ID], [$LIGHTTPD_VERSION_ID], [lighttpd-version-id])

apps/lighttpd-1.4.32/depcomp

@@ -1,10 +1,9 @@
 #! /bin/sh
 # depcomp - compile a program generating dependencies as side-effects
 
-scriptversion=2012-03-27.16; # UTC
+scriptversion=2013-05-30.07; # UTC
 
-# Copyright (C) 1999, 2000, 2003, 2004, 2005, 2006, 2007, 2009, 2010,
+# Copyright (C) 1999-2013 Free Software Foundation, Inc.
-# 2011, 2012 Free Software Foundation, Inc.
 
 # This program is free software; you can redistribute it and/or modify
 # it under the terms of the GNU General Public License as published by
@@ -57,11 +56,65 @@ EOF
     ;;
 esac
 
+# Get the directory component of the given path, and save it in the
+# global variables '$dir'.  Note that this directory component will
+# be either empty or ending with a '/' character.  This is deliberate.
+set_dir_from ()
+{
+  case $1 in
+    */*) dir=`echo "$1" | sed -e 's|/[^/]*$|/|'`;;
+      *) dir=;;
+  esac
+}
+
+# Get the suffix-stripped basename of the given path, and save it the
+# global variable '$base'.
+set_base_from ()
+{
+  base=`echo "$1" | sed -e 's|^.*/||' -e 's/\.[^.]*$//'`
+}
+
+# If no dependency file was actually created by the compiler invocation,
+# we still have to create a dummy depfile, to avoid errors with the
+# Makefile "include basename.Plo" scheme.
+make_dummy_depfile ()
+{
+  echo "#dummy" > "$depfile"
+}
+
+# Factor out some common post-processing of the generated depfile.
+# Requires the auxiliary global variable '$tmpdepfile' to be set.
+aix_post_process_depfile ()
+{
+  # If the compiler actually managed to produce a dependency file,
+  # post-process it.
+  if test -f "$tmpdepfile"; then
+    # Each line is of the form 'foo.o: dependency.h'.
+    # Do two passes, one to just change these to
+    #   $object: dependency.h
+    # and one to simply output
+    #   dependency.h:
+    # which is needed to avoid the deleted-header problem.
+    { sed -e "s,^.*\.[$lower]*:,$object:," < "$tmpdepfile"
+      sed -e "s,^.*\.[$lower]*:[$tab ]*,," -e 's,$,:,' < "$tmpdepfile"
+    } > "$depfile"
+    rm -f "$tmpdepfile"
+  else
+    make_dummy_depfile
+  fi
+}
+
 # A tabulation character.
 tab='	'
 # A newline character.
 nl='
 '
+# Character ranges might be problematic outside the C locale.
+# These definitions help.
+upper=ABCDEFGHIJKLMNOPQRSTUVWXYZ
+lower=abcdefghijklmnopqrstuvwxyz
+digits=0123456789
+alpha=${upper}${lower}
 
 if test -z "$depmode" || test -z "$source" || test -z "$object"; then
   echo "depcomp: Variables source, object and depmode must be set" 1>&2
@@ -75,6 +128,9 @@ tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`}
 
 rm -f "$tmpdepfile"
 
+# Avoid interferences from the environment.
+gccflag= dashmflag=
+
 # Some modes work just like other modes, but use different flags.  We
 # parameterize here, but still list the modes in the big case below,
 # to make depend.m4 easier to write.  Note that we *cannot* use a case
@@ -109,7 +165,7 @@ if test "$depmode" = msvc7msys; then
 fi
 
 if test "$depmode" = xlc; then
-   # IBM C/C++ Compilers xlc/xlC can output gcc-like dependency informations.
+  # IBM C/C++ Compilers xlc/xlC can output gcc-like dependency information.
   gccflag=-qmakedep=gcc,-MF
   depmode=gcc
 fi
@@ -134,8 +190,7 @@ gcc3)
   done
   "$@"
   stat=$?
-  if test $stat -eq 0; then :
+  if test $stat -ne 0; then
-  else
     rm -f "$tmpdepfile"
     exit $stat
   fi
@@ -143,13 +198,17 @@ gcc3)
   ;;
 
 gcc)
+## Note that this doesn't just cater to obsosete pre-3.x GCC compilers.
+## but also to in-use compilers like IMB xlc/xlC and the HP C compiler.
+## (see the conditional assignment to $gccflag above).
 ## There are various ways to get dependency output from gcc.  Here's
 ## why we pick this rather obscure method:
 ## - Don't want to use -MD because we'd like the dependencies to end
 ##   up in a subdir.  Having to rename by hand is ugly.
 ##   (We might end up doing this anyway to support other compilers.)
 ## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like
-##   -MM, not -M (despite what the docs say).
+##   -MM, not -M (despite what the docs say).  Also, it might not be
+##   supported by the other compilers which use the 'gcc' depmode.
 ## - Using -M directly means running the compiler twice (even worse
 ##   than renaming).
   if test -z "$gccflag"; then
@@ -157,15 +216,14 @@ gcc)
   fi
   "$@" -Wp,"$gccflag$tmpdepfile"
   stat=$?
-  if test $stat -eq 0; then :
+  if test $stat -ne 0; then
-  else
     rm -f "$tmpdepfile"
     exit $stat
   fi
   rm -f "$depfile"
   echo "$object : \\" > "$depfile"
-  alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz
+  # The second -e expression handles DOS-style file names with drive
-## The second -e expression handles DOS-style file names with drive letters.
+  # letters.
   sed -e 's/^[^:]*: / /' \
       -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile"
 ## This next piece of magic avoids the "deleted header file" problem.
@@ -174,14 +232,14 @@ gcc)
 ## typically no way to rebuild the header).  We avoid this by adding
 ## dummy dependencies for each header file.  Too bad gcc doesn't do
 ## this for us directly.
-  tr ' ' "$nl" < "$tmpdepfile" |
 ## Some versions of gcc put a space before the ':'.  On the theory
 ## that the space means something, we add a space to the output as
 ## well.  hp depmode also adds that space, but also prefixes the VPATH
 ## to the object.  Take care to not repeat it in the output.
 ## Some versions of the HPUX 10.20 sed can't process this invocation
 ## correctly.  Breaking it into two sed invocations is a workaround.
-    sed -e 's/^\\$//' -e '/^$/d' -e "s|.*$object$||" -e '/:$/d' \
+  tr ' ' "$nl" < "$tmpdepfile" \
+    | sed -e 's/^\\$//' -e '/^$/d' -e "s|.*$object$||" -e '/:$/d' \
     | sed -e 's/$/ :/' >> "$depfile"
   rm -f "$tmpdepfile"
   ;;
@@ -200,8 +258,7 @@ sgi)
     "$@" -MDupdate "$tmpdepfile"
   fi
   stat=$?
-  if test $stat -eq 0; then :
+  if test $stat -ne 0; then
-  else
     rm -f "$tmpdepfile"
     exit $stat
   fi
@@ -209,7 +266,6 @@ sgi)
 
   if test -f "$tmpdepfile"; then  # yes, the sourcefile depend on other files
     echo "$object : \\" > "$depfile"
-
     # Clip off the initial element (the dependent).  Don't try to be
     # clever and replace this with sed code, as IRIX sed won't handle
     # lines with more than a fixed number of characters (4096 in
@@ -217,19 +273,15 @@ sgi)
     # the IRIX cc adds comments like '#:fec' to the end of the
     # dependency line.
     tr ' ' "$nl" < "$tmpdepfile" \
-    | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \
+      | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' \
-    tr "$nl" ' ' >> "$depfile"
+      | tr "$nl" ' ' >> "$depfile"
     echo >> "$depfile"
-
     # The second pass generates a dummy entry for each header file.
     tr ' ' "$nl" < "$tmpdepfile" \
       | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \
       >> "$depfile"
   else
-    # The sourcefile does not contain any dependencies, so just
+    make_dummy_depfile
-    # store a dummy comment line, to avoid errors with the Makefile
-    # "include basename.Plo" scheme.
-    echo "#dummy" > "$depfile"
   fi
   rm -f "$tmpdepfile"
   ;;
@@ -247,9 +299,8 @@ aix)
   # current directory.  Also, the AIX compiler puts '$object:' at the
   # start of each line; $object doesn't have directory information.
   # Version 6 uses the directory in both cases.
-  dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
+  set_dir_from "$object"
-  test "x$dir" = "x$object" && dir=
+  set_base_from "$object"
-  base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
   if test "$libtool" = yes; then
     tmpdepfile1=$dir$base.u
     tmpdepfile2=$base.u
@@ -262,9 +313,7 @@ aix)
     "$@" -M
   fi
   stat=$?
-
+  if test $stat -ne 0; then
-  if test $stat -eq 0; then :
-  else
     rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
     exit $stat
   fi
@@ -273,65 +322,113 @@ aix)
   do
     test -f "$tmpdepfile" && break
   done
-  if test -f "$tmpdepfile"; then
+  aix_post_process_depfile
-    # Each line is of the form 'foo.o: dependent.h'.
-    # Do two passes, one to just change these to
-    # '$object: dependent.h' and one to simply 'dependent.h:'.
-    sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
-    sed -e 's,^.*\.[a-z]*:['"$tab"' ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
-  else
-    # The sourcefile does not contain any dependencies, so just
-    # store a dummy comment line, to avoid errors with the Makefile
-    # "include basename.Plo" scheme.
-    echo "#dummy" > "$depfile"
-  fi
-  rm -f "$tmpdepfile"
   ;;
 
-icc)
+tcc)
-  # Intel's C compiler anf tcc (Tiny C Compiler) understand '-MD -MF file'.
+  # tcc (Tiny C Compiler) understand '-MD -MF file' since version 0.9.26
-  # However on
+  # FIXME: That version still under development at the moment of writing.
-  #    $CC -MD -MF foo.d -c -o sub/foo.o sub/foo.c
+  #        Make that this statement remains true also for stable, released
-  # ICC 7.0 will fill foo.d with something like
+  #        versions.
-  #    foo.o: sub/foo.c
+  # It will wrap lines (doesn't matter whether long or short) with a
-  #    foo.o: sub/foo.h
+  # trailing '\', as in:
-  # which is wrong.  We want
+  #
-  #    sub/foo.o: sub/foo.c
+  #   foo.o : \
-  #    sub/foo.o: sub/foo.h
+  #    foo.c \
-  #    sub/foo.c:
+  #    foo.h \
-  #    sub/foo.h:
+  #
-  # ICC 7.1 will output
+  # It will put a trailing '\' even on the last line, and will use leading
-  #    foo.o: sub/foo.c sub/foo.h
+  # spaces rather than leading tabs (at least since its commit 0394caf7
-  # and will wrap long lines using '\':
+  # "Emit spaces for -MD").
-  #    foo.o: sub/foo.c ... \
-  #     sub/foo.h ... \
-  #     ...
-  # tcc 0.9.26 (FIXME still under development at the moment of writing)
-  # will emit a similar output, but also prepend the continuation lines
-  # with horizontal tabulation characters.
   "$@" -MD -MF "$tmpdepfile"
   stat=$?
-  if test $stat -eq 0; then :
+  if test $stat -ne 0; then
-  else
     rm -f "$tmpdepfile"
     exit $stat
   fi
   rm -f "$depfile"
-  # Each line is of the form 'foo.o: dependent.h',
+  # Each non-empty line is of the form 'foo.o : \' or ' dep.h \'.
-  # or 'foo.o: dep1.h dep2.h \', or ' dep3.h dep4.h \'.
+  # We have to change lines of the first kind to '$object: \'.
+  sed -e "s|.*:|$object :|" < "$tmpdepfile" > "$depfile"
+  # And for each line of the second kind, we have to emit a 'dep.h:'
+  # dummy dependency, to avoid the deleted-header problem.
+  sed -n -e 's|^  *\(.*\) *\\$|\1:|p' < "$tmpdepfile" >> "$depfile"
+  rm -f "$tmpdepfile"
+  ;;
+
+## The order of this option in the case statement is important, since the
+## shell code in configure will try each of these formats in the order
+## listed in this file.  A plain '-MD' option would be understood by many
+## compilers, so we must ensure this comes after the gcc and icc options.
+pgcc)
+  # Portland's C compiler understands '-MD'.
+  # Will always output deps to 'file.d' where file is the root name of the
+  # source file under compilation, even if file resides in a subdirectory.
+  # The object file name does not affect the name of the '.d' file.
+  # pgcc 10.2 will output
+  #    foo.o: sub/foo.c sub/foo.h
+  # and will wrap long lines using '\' :
+  #    foo.o: sub/foo.c ... \
+  #     sub/foo.h ... \
+  #     ...
+  set_dir_from "$object"
+  # Use the source, not the object, to determine the base name, since
+  # that's sadly what pgcc will do too.
+  set_base_from "$source"
+  tmpdepfile=$base.d
+
+  # For projects that build the same source file twice into different object
+  # files, the pgcc approach of using the *source* file root name can cause
+  # problems in parallel builds.  Use a locking strategy to avoid stomping on
+  # the same $tmpdepfile.
+  lockdir=$base.d-lock
+  trap "
+    echo '$0: caught signal, cleaning up...' >&2
+    rmdir '$lockdir'
+    exit 1
+  " 1 2 13 15
+  numtries=100
+  i=$numtries
+  while test $i -gt 0; do
+    # mkdir is a portable test-and-set.
+    if mkdir "$lockdir" 2>/dev/null; then
+      # This process acquired the lock.
+      "$@" -MD
+      stat=$?
+      # Release the lock.
+      rmdir "$lockdir"
+      break
+    else
+      # If the lock is being held by a different process, wait
+      # until the winning process is done or we timeout.
+      while test -d "$lockdir" && test $i -gt 0; do
+        sleep 1
+        i=`expr $i - 1`
+      done
+    fi
+    i=`expr $i - 1`
+  done
+  trap - 1 2 13 15
+  if test $i -le 0; then
+    echo "$0: failed to acquire lock after $numtries attempts" >&2
+    echo "$0: check lockdir '$lockdir'" >&2
+    exit 1
+  fi
+
+  if test $stat -ne 0; then
+    rm -f "$tmpdepfile"
+    exit $stat
+  fi
+  rm -f "$depfile"
+  # Each line is of the form `foo.o: dependent.h',
+  # or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'.
   # Do two passes, one to just change these to
-  # '$object: dependent.h' and one to simply 'dependent.h:'.
+  # `$object: dependent.h' and one to simply `dependent.h:'.
-  sed -e "s/^[ $tab][ $tab]*/  /" -e "s,^[^:]*:,$object :," \
+  sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile"
-    < "$tmpdepfile" > "$depfile"
+  # Some versions of the HPUX 10.20 sed can't process this invocation
-  sed '
+  # correctly.  Breaking it into two sed invocations is a workaround.
-    s/[ '"$tab"'][ '"$tab"']*/ /g
+  sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" \
-    s/^ *//
+    | sed -e 's/$/ :/' >> "$depfile"
-    s/ *\\*$//
-    s/^[^:]*: *//
-    /^$/d
-    /:$/d
-    s/$/ :/
-  ' < "$tmpdepfile" >> "$depfile"
   rm -f "$tmpdepfile"
   ;;
 
@@ -342,9 +439,8 @@ hp2)
   # 'foo.d', which lands next to the object file, wherever that
   # happens to be.
   # Much of this is similar to the tru64 case; see comments there.
-  dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
+  set_dir_from  "$object"
-  test "x$dir" = "x$object" && dir=
+  set_base_from "$object"
-  base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
   if test "$libtool" = yes; then
     tmpdepfile1=$dir$base.d
     tmpdepfile2=$dir.libs/$base.d
@@ -355,8 +451,7 @@ hp2)
     "$@" +Maked
   fi
   stat=$?
-  if test $stat -eq 0; then :
+  if test $stat -ne 0; then
-  else
      rm -f "$tmpdepfile1" "$tmpdepfile2"
      exit $stat
   fi
@@ -366,7 +461,7 @@ hp2)
     test -f "$tmpdepfile" && break
   done
   if test -f "$tmpdepfile"; then
-    sed -e "s,^.*\.[a-z]*:,$object:," "$tmpdepfile" > "$depfile"
+    sed -e "s,^.*\.[$lower]*:,$object:," "$tmpdepfile" > "$depfile"
     # Add 'dependent.h:' lines.
     sed -ne '2,${
                s/^ *//
@@ -375,7 +470,7 @@ hp2)
                p
              }' "$tmpdepfile" >> "$depfile"
   else
-    echo "#dummy" > "$depfile"
+    make_dummy_depfile
   fi
   rm -f "$tmpdepfile" "$tmpdepfile2"
   ;;
@@ -386,55 +481,40 @@ tru64)
   # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put
   # dependencies in 'foo.d' instead, so we check for that too.
   # Subdirectories are respected.
-   dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
+  set_dir_from  "$object"
-   test "x$dir" = "x$object" && dir=
+  set_base_from "$object"
-   base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
 
   if test "$libtool" = yes; then
-      # With Tru64 cc, shared objects can also be used to make a
+    # Libtool generates 2 separate objects for the 2 libraries.  These
-      # static library.  This mechanism is used in libtool 1.4 series to
+    # two compilations output dependencies in $dir.libs/$base.o.d and
-      # handle both shared and static libraries in a single compilation.
-      # With libtool 1.4, dependencies were output in $dir.libs/$base.lo.d.
-      #
-      # With libtool 1.5 this exception was removed, and libtool now
-      # generates 2 separate objects for the 2 libraries.  These two
-      # compilations output dependencies in $dir.libs/$base.o.d and
     # in $dir$base.o.d.  We have to check for both files, because
     # one of the two compilations can be disabled.  We should prefer
     # $dir$base.o.d over $dir.libs/$base.o.d because the latter is
     # automatically cleaned when .libs/ is deleted, while ignoring
     # the former would cause a distcleancheck panic.
-      tmpdepfile1=$dir.libs/$base.lo.d   # libtool 1.4
+    tmpdepfile1=$dir$base.o.d          # libtool 1.5
-      tmpdepfile2=$dir$base.o.d          # libtool 1.5
+    tmpdepfile2=$dir.libs/$base.o.d    # Likewise.
-      tmpdepfile3=$dir.libs/$base.o.d    # libtool 1.5
+    tmpdepfile3=$dir.libs/$base.d      # Compaq CCC V6.2-504
-      tmpdepfile4=$dir.libs/$base.d      # Compaq CCC V6.2-504
     "$@" -Wc,-MD
   else
-      tmpdepfile1=$dir$base.o.d
+    tmpdepfile1=$dir$base.d
     tmpdepfile2=$dir$base.d
     tmpdepfile3=$dir$base.d
-      tmpdepfile4=$dir$base.d
     "$@" -MD
   fi
 
   stat=$?
-   if test $stat -eq 0; then :
+  if test $stat -ne 0; then
-   else
+    rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
-      rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
     exit $stat
   fi
 
-   for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
+  for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
   do
     test -f "$tmpdepfile" && break
   done
-   if test -f "$tmpdepfile"; then
+  # Same post-processing that is required for AIX mode.
-      sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
+  aix_post_process_depfile
-      sed -e 's,^.*\.[a-z]*:['"$tab"' ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
-   else
-      echo "#dummy" > "$depfile"
-   fi
-   rm -f "$tmpdepfile"
   ;;
 
 msvc7)
@@ -446,8 +526,7 @@ msvc7)
   "$@" $showIncludes > "$tmpdepfile"
   stat=$?
   grep -v '^Note: including file: ' "$tmpdepfile"
-  if test "$stat" = 0; then :
+  if test $stat -ne 0; then
-  else
     rm -f "$tmpdepfile"
     exit $stat
   fi
@@ -473,6 +552,7 @@ $ {
   G
   p
 }' >> "$depfile"
+  echo >> "$depfile" # make sure the fragment doesn't end with a backslash
   rm -f "$tmpdepfile"
   ;;
 
@@ -524,13 +604,14 @@ dashmstdout)
   # in the target name.  This is to cope with DOS-style filenames:
   # a dependency such as 'c:/foo/bar' could be seen as target 'c' otherwise.
   "$@" $dashmflag |
-    sed 's:^['"$tab"' ]*[^:'"$tab"' ][^:][^:]*\:['"$tab"' ]*:'"$object"'\: :' > "$tmpdepfile"
+    sed "s|^[$tab ]*[^:$tab ][^:][^:]*:[$tab ]*|$object: |" > "$tmpdepfile"
   rm -f "$depfile"
   cat < "$tmpdepfile" > "$depfile"
-  tr ' ' "$nl" < "$tmpdepfile" | \
+  # Some versions of the HPUX 10.20 sed can't process this sed invocation
-## Some versions of the HPUX 10.20 sed can't process this invocation
+  # correctly.  Breaking it into two sed invocations is a workaround.
-## correctly.  Breaking it into two sed invocations is a workaround.
+  tr ' ' "$nl" < "$tmpdepfile" \
-    sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
+    | sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' \
+    | sed -e 's/$/ :/' >> "$depfile"
   rm -f "$tmpdepfile"
   ;;
 
@@ -583,10 +664,12 @@ makedepend)
   # makedepend may prepend the VPATH from the source file name to the object.
   # No need to regex-escape $object, excess matching of '.' is harmless.
   sed "s|^.*\($object *:\)|\1|" "$tmpdepfile" > "$depfile"
-  sed '1,2d' "$tmpdepfile" | tr ' ' "$nl" | \
+  # Some versions of the HPUX 10.20 sed can't process the last invocation
-## Some versions of the HPUX 10.20 sed can't process this invocation
+  # correctly.  Breaking it into two sed invocations is a workaround.
-## correctly.  Breaking it into two sed invocations is a workaround.
+  sed '1,2d' "$tmpdepfile" \
-    sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
+    | tr ' ' "$nl" \
+    | sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' \
+    | sed -e 's/$/ :/' >> "$depfile"
   rm -f "$tmpdepfile" "$tmpdepfile".bak
   ;;
 
@@ -622,10 +705,10 @@ cpp)
     esac
   done
 
-  "$@" -E |
+  "$@" -E \
-    sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
+    | sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
-       -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' |
+             -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
-    sed '$ s: \\$::' > "$tmpdepfile"
+    | sed '$ s: \\$::' > "$tmpdepfile"
   rm -f "$depfile"
   echo "$object : \\" > "$depfile"
   cat < "$tmpdepfile" >> "$depfile"

apps/lighttpd-1.4.32/doc/Makefile.in

@@ -1,9 +1,8 @@
-# Makefile.in generated by automake 1.11.6 from Makefile.am.
+# Makefile.in generated by automake 1.14.1 from Makefile.am.
 # @configure_input@
 
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# Copyright (C) 1994-2013 Free Software Foundation, Inc.
-# 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software
+
-# Foundation, Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -15,23 +14,51 @@
 
 @SET_MAKE@
 VPATH = @srcdir@
-am__make_dryrun = \
+am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
-  { \
+am__make_running_with_option = \
-    am__dry=no; \
+  case $${target_option-} in \
+      ?) ;; \
+      *) echo "am__make_running_with_option: internal error: invalid" \
+              "target option '$${target_option-}' specified" >&2; \
+         exit 1;; \
+  esac; \
+  has_opt=no; \
+  sane_makeflags=$$MAKEFLAGS; \
+  if $(am__is_gnu_make); then \
+    sane_makeflags=$$MFLAGS; \
+  else \
     case $$MAKEFLAGS in \
       *\\[\ \	]*) \
-        echo 'am--echo: ; @echo "AM"  OK' | $(MAKE) -f - 2>/dev/null \
+        bs=\\; \
-          | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
+        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
-      *) \
+          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
-        for am__flg in $$MAKEFLAGS; do \
-          case $$am__flg in \
-            *=*|--*) ;; \
-            *n*) am__dry=yes; break;; \
     esac; \
-        done;; \
+  fi; \
+  skip_next=no; \
+  strip_trailopt () \
+  { \
+    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+  }; \
+  for flg in $$sane_makeflags; do \
+    test $$skip_next = yes && { skip_next=no; continue; }; \
+    case $$flg in \
+      *=*|--*) continue;; \
+        -*I) strip_trailopt 'I'; skip_next=yes;; \
+      -*I?*) strip_trailopt 'I';; \
+        -*O) strip_trailopt 'O'; skip_next=yes;; \
+      -*O?*) strip_trailopt 'O';; \
+        -*l) strip_trailopt 'l'; skip_next=yes;; \
+      -*l?*) strip_trailopt 'l';; \
+      -[dEDm]) skip_next=yes;; \
+      -[JT]) skip_next=yes;; \
     esac; \
-    test $$am__dry = yes; \
+    case $$flg in \
-  }
+      *$$target_option*) has_opt=yes; break;; \
+    esac; \
+  done; \
+  test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
 pkgdatadir = $(datadir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
 pkglibdir = $(libdir)/@PACKAGE@
@@ -52,8 +79,8 @@ build_triplet = @build@
 host_triplet = @host@
 target_triplet = @target@
 subdir = doc
-DIST_COMMON = $(dist_man8_MANS) $(srcdir)/Makefile.am \
+DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \
-	$(srcdir)/Makefile.in
+	$(dist_man8_MANS)
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
 am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \
 	$(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
@@ -65,21 +92,28 @@ mkinstalldirs = $(install_sh) -d
 CONFIG_HEADER = $(top_builddir)/config.h
 CONFIG_CLEAN_FILES =
 CONFIG_CLEAN_VPATH_FILES =
+AM_V_P = $(am__v_P_@AM_V@)
+am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
+am__v_P_0 = false
+am__v_P_1 = :
 AM_V_GEN = $(am__v_GEN_@AM_V@)
 am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
 am__v_GEN_0 = @echo "  GEN     " $@;
+am__v_GEN_1 = 
 AM_V_at = $(am__v_at_@AM_V@)
 am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
 am__v_at_0 = @
+am__v_at_1 = 
 SOURCES =
 DIST_SOURCES =
-RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
+RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
-	html-recursive info-recursive install-data-recursive \
+	ctags-recursive dvi-recursive html-recursive info-recursive \
-	install-dvi-recursive install-exec-recursive \
+	install-data-recursive install-dvi-recursive \
-	install-html-recursive install-info-recursive \
+	install-exec-recursive install-html-recursive \
-	install-pdf-recursive install-ps-recursive install-recursive \
+	install-info-recursive install-pdf-recursive \
-	installcheck-recursive installdirs-recursive pdf-recursive \
+	install-ps-recursive install-recursive installcheck-recursive \
-	ps-recursive uninstall-recursive
+	installdirs-recursive pdf-recursive ps-recursive \
+	tags-recursive uninstall-recursive
 am__can_run_installinfo = \
   case $$AM_UPDATE_INFO_DIR in \
     n|no|NO) false;; \
@@ -118,9 +152,29 @@ NROFF = nroff
 MANS = $(dist_man8_MANS)
 RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
   distclean-recursive maintainer-clean-recursive
-AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
+am__recursive_targets = \
-	$(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
+  $(RECURSIVE_TARGETS) \
+  $(RECURSIVE_CLEAN_TARGETS) \
+  $(am__extra_recursive_targets)
+AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
 	distdir
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
+# Read a list of newline-separated strings from the standard input,
+# and print each of them once, without duplicates.  Input order is
+# *not* preserved.
+am__uniquify_input = $(AWK) '\
+  BEGIN { nonempty = 0; } \
+  { items[$$0] = 1; nonempty = 1; } \
+  END { if (nonempty) { for (i in items) print i; }; } \
+'
+# Make sure the list of sources is unique.  This is necessary because,
+# e.g., the same source file might be shared among _SOURCES variables
+# for different programs/libraries.
+am__define_uniq_tagged_files = \
+  list='$(am__tagged_files)'; \
+  unique=`for i in $$list; do \
+    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+  done | $(am__uniquify_input)`
 ETAGS = etags
 CTAGS = ctags
 DIST_SUBDIRS = $(SUBDIRS)
@@ -392,22 +446,25 @@ uninstall-man8:
 	dir='$(DESTDIR)$(man8dir)'; $(am__uninstall_files_from_dir)
 
 # This directory's subdirectories are mostly independent; you can cd
-# into them and run `make' without going through this Makefile.
+# into them and run 'make' without going through this Makefile.
-# To change the values of `make' variables: instead of editing Makefiles,
+# To change the values of 'make' variables: instead of editing Makefiles,
-# (1) if the variable is set in `config.status', edit `config.status'
+# (1) if the variable is set in 'config.status', edit 'config.status'
-#     (which will cause the Makefiles to be regenerated when you run `make');
+#     (which will cause the Makefiles to be regenerated when you run 'make');
-# (2) otherwise, pass the desired values on the `make' command line.
+# (2) otherwise, pass the desired values on the 'make' command line.
-$(RECURSIVE_TARGETS):
+$(am__recursive_targets):
-	@fail= failcom='exit 1'; \
+	@fail=; \
-	for f in x $$MAKEFLAGS; do \
+	if $(am__make_keepgoing); then \
-	  case $$f in \
+	  failcom='fail=yes'; \
-	    *=* | --[!k]*);; \
+	else \
-	    *k*) failcom='fail=yes';; \
+	  failcom='exit 1'; \
-	  esac; \
+	fi; \
-	done; \
 	dot_seen=no; \
 	target=`echo $@ | sed s/-recursive//`; \
-	list='$(SUBDIRS)'; for subdir in $$list; do \
+	case "$@" in \
+	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+	  *) list='$(SUBDIRS)' ;; \
+	esac; \
+	for subdir in $$list; do \
 	  echo "Making $$target in $$subdir"; \
 	  if test "$$subdir" = "."; then \
 	    dot_seen=yes; \
@@ -422,57 +479,12 @@ $(RECURSIVE_TARGETS):
 	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
 	fi; test -z "$$fail"
 
-$(RECURSIVE_CLEAN_TARGETS):
+ID: $(am__tagged_files)
-	@fail= failcom='exit 1'; \
+	$(am__define_uniq_tagged_files); mkid -fID $$unique
-	for f in x $$MAKEFLAGS; do \
+tags: tags-recursive
-	  case $$f in \
+TAGS: tags
-	    *=* | --[!k]*);; \
-	    *k*) failcom='fail=yes';; \
-	  esac; \
-	done; \
-	dot_seen=no; \
-	case "$@" in \
-	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
-	  *) list='$(SUBDIRS)' ;; \
-	esac; \
-	rev=''; for subdir in $$list; do \
-	  if test "$$subdir" = "."; then :; else \
-	    rev="$$subdir $$rev"; \
-	  fi; \
-	done; \
-	rev="$$rev ."; \
-	target=`echo $@ | sed s/-recursive//`; \
-	for subdir in $$rev; do \
-	  echo "Making $$target in $$subdir"; \
-	  if test "$$subdir" = "."; then \
-	    local_target="$$target-am"; \
-	  else \
-	    local_target="$$target"; \
-	  fi; \
-	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
-	  || eval $$failcom; \
-	done && test -z "$$fail"
-tags-recursive:
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
-	done
-ctags-recursive:
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
-	done
 
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
-	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
-	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	mkid -fID $$unique
-tags: TAGS
-
-TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
-		$(TAGS_FILES) $(LISP)
 	set x; \
 	here=`pwd`; \
 	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
@@ -488,12 +500,7 @@ TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
 	  fi; \
 	done; \
-	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
+	$(am__define_uniq_tagged_files); \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
-	      END { if (nonempty) { for (i in files) print i; }; }'`; \
 	shift; \
 	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 	  test -n "$$unique" || unique=$$empty_fix; \
@@ -505,15 +512,11 @@ TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 	      $$unique; \
 	  fi; \
 	fi
-ctags: CTAGS
+ctags: ctags-recursive
-CTAGS: ctags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
+
-		$(TAGS_FILES) $(LISP)
+CTAGS: ctags
-	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
+ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
-	unique=`for i in $$list; do \
+	$(am__define_uniq_tagged_files); \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
-	      END { if (nonempty) { for (i in files) print i; }; }'`; \
 	test -z "$(CTAGS_ARGS)$$unique" \
 	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
 	     $$unique
@@ -522,24 +525,26 @@ GTAGS:
 	here=`$(am__cd) $(top_builddir) && pwd` \
 	  && $(am__cd) $(top_srcdir) \
 	  && gtags -i $(GTAGS_ARGS) "$$here"
+cscopelist: cscopelist-recursive
+
+cscopelist-am: $(am__tagged_files)
+	list='$(am__tagged_files)'; \
+	case "$(srcdir)" in \
+	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
+	  *) sdir=$(subdir)/$(srcdir) ;; \
+	esac; \
+	for i in $$list; do \
+	  if test -f "$$i"; then \
+	    echo "$(subdir)/$$i"; \
+	  else \
+	    echo "$$sdir/$$i"; \
+	  fi; \
+	done >> $(top_builddir)/cscope.files
 
 distclean-tags:
 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
 
 distdir: $(DISTFILES)
-	@list='$(MANS)'; if test -n "$$list"; then \
-	  list=`for p in $$list; do \
-	    if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
-	    if test -f "$$d$$p"; then echo "$$d$$p"; else :; fi; done`; \
-	  if test -n "$$list" && \
-	    grep 'ab help2man is required to generate this page' $$list >/dev/null; then \
-	    echo "error: found man pages containing the \`missing help2man' replacement text:" >&2; \
-	    grep -l 'ab help2man is required to generate this page' $$list | sed 's/^/         /' >&2; \
-	    echo "       to fix them, install help2man, remove and regenerate the man pages;" >&2; \
-	    echo "       typically \`make maintainer-clean' will remove them" >&2; \
-	    exit 1; \
-	  else :; fi; \
-	else :; fi
 	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
 	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
 	list='$(DISTFILES)'; \
@@ -700,23 +705,21 @@ uninstall-am: uninstall-man
 
 uninstall-man: uninstall-man8
 
-.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \
+.MAKE: $(am__recursive_targets) install-am install-strip
-	install-am install-strip tags-recursive
 
-.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
+.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am check \
-	all all-am check check-am clean clean-generic clean-libtool \
+	check-am clean clean-generic clean-libtool cscopelist-am ctags \
-	ctags ctags-recursive distclean distclean-generic \
+	ctags-am distclean distclean-generic distclean-libtool \
-	distclean-libtool distclean-tags distdir dvi dvi-am html \
+	distclean-tags distdir dvi dvi-am html html-am info info-am \
-	html-am info info-am install install-am install-data \
+	install install-am install-data install-data-am install-dvi \
-	install-data-am install-dvi install-dvi-am install-exec \
+	install-dvi-am install-exec install-exec-am install-html \
-	install-exec-am install-html install-html-am install-info \
+	install-html-am install-info install-info-am install-man \
-	install-info-am install-man install-man8 install-pdf \
+	install-man8 install-pdf install-pdf-am install-ps \
-	install-pdf-am install-ps install-ps-am install-strip \
+	install-ps-am install-strip installcheck installcheck-am \
-	installcheck installcheck-am installdirs installdirs-am \
+	installdirs installdirs-am maintainer-clean \
-	maintainer-clean maintainer-clean-generic mostlyclean \
+	maintainer-clean-generic mostlyclean mostlyclean-generic \
-	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
+	mostlyclean-libtool pdf pdf-am ps ps-am tags tags-am uninstall \
-	tags tags-recursive uninstall uninstall-am uninstall-man \
+	uninstall-am uninstall-man uninstall-man8
-	uninstall-man8
 
 
 # Tell versions [3.59,3.63) of GNU make to not export all variables.

apps/lighttpd-1.4.32/doc/config/Makefile.in

@@ -1,9 +1,8 @@
-# Makefile.in generated by automake 1.11.6 from Makefile.am.
+# Makefile.in generated by automake 1.14.1 from Makefile.am.
 # @configure_input@
 
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# Copyright (C) 1994-2013 Free Software Foundation, Inc.
-# 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software
+
-# Foundation, Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -15,23 +14,51 @@
 
 @SET_MAKE@
 VPATH = @srcdir@
-am__make_dryrun = \
+am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
-  { \
+am__make_running_with_option = \
-    am__dry=no; \
+  case $${target_option-} in \
+      ?) ;; \
+      *) echo "am__make_running_with_option: internal error: invalid" \
+              "target option '$${target_option-}' specified" >&2; \
+         exit 1;; \
+  esac; \
+  has_opt=no; \
+  sane_makeflags=$$MAKEFLAGS; \
+  if $(am__is_gnu_make); then \
+    sane_makeflags=$$MFLAGS; \
+  else \
     case $$MAKEFLAGS in \
       *\\[\ \	]*) \
-        echo 'am--echo: ; @echo "AM"  OK' | $(MAKE) -f - 2>/dev/null \
+        bs=\\; \
-          | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
+        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
-      *) \
+          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
-        for am__flg in $$MAKEFLAGS; do \
-          case $$am__flg in \
-            *=*|--*) ;; \
-            *n*) am__dry=yes; break;; \
     esac; \
-        done;; \
+  fi; \
+  skip_next=no; \
+  strip_trailopt () \
+  { \
+    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+  }; \
+  for flg in $$sane_makeflags; do \
+    test $$skip_next = yes && { skip_next=no; continue; }; \
+    case $$flg in \
+      *=*|--*) continue;; \
+        -*I) strip_trailopt 'I'; skip_next=yes;; \
+      -*I?*) strip_trailopt 'I';; \
+        -*O) strip_trailopt 'O'; skip_next=yes;; \
+      -*O?*) strip_trailopt 'O';; \
+        -*l) strip_trailopt 'l'; skip_next=yes;; \
+      -*l?*) strip_trailopt 'l';; \
+      -[dEDm]) skip_next=yes;; \
+      -[JT]) skip_next=yes;; \
     esac; \
-    test $$am__dry = yes; \
+    case $$flg in \
-  }
+      *$$target_option*) has_opt=yes; break;; \
+    esac; \
+  done; \
+  test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
 pkgdatadir = $(datadir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
 pkglibdir = $(libdir)/@PACKAGE@
@@ -52,7 +79,7 @@ build_triplet = @build@
 host_triplet = @host@
 target_triplet = @target@
 subdir = doc/config
-DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
+DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
 am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \
 	$(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
@@ -64,21 +91,28 @@ mkinstalldirs = $(install_sh) -d
 CONFIG_HEADER = $(top_builddir)/config.h
 CONFIG_CLEAN_FILES =
 CONFIG_CLEAN_VPATH_FILES =
+AM_V_P = $(am__v_P_@AM_V@)
+am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
+am__v_P_0 = false
+am__v_P_1 = :
 AM_V_GEN = $(am__v_GEN_@AM_V@)
 am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
 am__v_GEN_0 = @echo "  GEN     " $@;
+am__v_GEN_1 = 
 AM_V_at = $(am__v_at_@AM_V@)
 am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
 am__v_at_0 = @
+am__v_at_1 = 
 SOURCES =
 DIST_SOURCES =
-RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
+RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
-	html-recursive info-recursive install-data-recursive \
+	ctags-recursive dvi-recursive html-recursive info-recursive \
-	install-dvi-recursive install-exec-recursive \
+	install-data-recursive install-dvi-recursive \
-	install-html-recursive install-info-recursive \
+	install-exec-recursive install-html-recursive \
-	install-pdf-recursive install-ps-recursive install-recursive \
+	install-info-recursive install-pdf-recursive \
-	installcheck-recursive installdirs-recursive pdf-recursive \
+	install-ps-recursive install-recursive installcheck-recursive \
-	ps-recursive uninstall-recursive
+	installdirs-recursive pdf-recursive ps-recursive \
+	tags-recursive uninstall-recursive
 am__can_run_installinfo = \
   case $$AM_UPDATE_INFO_DIR in \
     n|no|NO) false;; \
@@ -86,9 +120,29 @@ am__can_run_installinfo = \
   esac
 RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
   distclean-recursive maintainer-clean-recursive
-AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
+am__recursive_targets = \
-	$(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
+  $(RECURSIVE_TARGETS) \
+  $(RECURSIVE_CLEAN_TARGETS) \
+  $(am__extra_recursive_targets)
+AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
 	distdir
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
+# Read a list of newline-separated strings from the standard input,
+# and print each of them once, without duplicates.  Input order is
+# *not* preserved.
+am__uniquify_input = $(AWK) '\
+  BEGIN { nonempty = 0; } \
+  { items[$$0] = 1; nonempty = 1; } \
+  END { if (nonempty) { for (i in items) print i; }; } \
+'
+# Make sure the list of sources is unique.  This is necessary because,
+# e.g., the same source file might be shared among _SOURCES variables
+# for different programs/libraries.
+am__define_uniq_tagged_files = \
+  list='$(am__tagged_files)'; \
+  unique=`for i in $$list; do \
+    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+  done | $(am__uniquify_input)`
 ETAGS = etags
 CTAGS = ctags
 DIST_SUBDIRS = $(SUBDIRS)
@@ -315,22 +369,25 @@ clean-libtool:
 	-rm -rf .libs _libs
 
 # This directory's subdirectories are mostly independent; you can cd
-# into them and run `make' without going through this Makefile.
+# into them and run 'make' without going through this Makefile.
-# To change the values of `make' variables: instead of editing Makefiles,
+# To change the values of 'make' variables: instead of editing Makefiles,
-# (1) if the variable is set in `config.status', edit `config.status'
+# (1) if the variable is set in 'config.status', edit 'config.status'
-#     (which will cause the Makefiles to be regenerated when you run `make');
+#     (which will cause the Makefiles to be regenerated when you run 'make');
-# (2) otherwise, pass the desired values on the `make' command line.
+# (2) otherwise, pass the desired values on the 'make' command line.
-$(RECURSIVE_TARGETS):
+$(am__recursive_targets):
-	@fail= failcom='exit 1'; \
+	@fail=; \
-	for f in x $$MAKEFLAGS; do \
+	if $(am__make_keepgoing); then \
-	  case $$f in \
+	  failcom='fail=yes'; \
-	    *=* | --[!k]*);; \
+	else \
-	    *k*) failcom='fail=yes';; \
+	  failcom='exit 1'; \
-	  esac; \
+	fi; \
-	done; \
 	dot_seen=no; \
 	target=`echo $@ | sed s/-recursive//`; \
-	list='$(SUBDIRS)'; for subdir in $$list; do \
+	case "$@" in \
+	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+	  *) list='$(SUBDIRS)' ;; \
+	esac; \
+	for subdir in $$list; do \
 	  echo "Making $$target in $$subdir"; \
 	  if test "$$subdir" = "."; then \
 	    dot_seen=yes; \
@@ -345,57 +402,12 @@ $(RECURSIVE_TARGETS):
 	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
 	fi; test -z "$$fail"
 
-$(RECURSIVE_CLEAN_TARGETS):
+ID: $(am__tagged_files)
-	@fail= failcom='exit 1'; \
+	$(am__define_uniq_tagged_files); mkid -fID $$unique
-	for f in x $$MAKEFLAGS; do \
+tags: tags-recursive
-	  case $$f in \
+TAGS: tags
-	    *=* | --[!k]*);; \
-	    *k*) failcom='fail=yes';; \
-	  esac; \
-	done; \
-	dot_seen=no; \
-	case "$@" in \
-	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
-	  *) list='$(SUBDIRS)' ;; \
-	esac; \
-	rev=''; for subdir in $$list; do \
-	  if test "$$subdir" = "."; then :; else \
-	    rev="$$subdir $$rev"; \
-	  fi; \
-	done; \
-	rev="$$rev ."; \
-	target=`echo $@ | sed s/-recursive//`; \
-	for subdir in $$rev; do \
-	  echo "Making $$target in $$subdir"; \
-	  if test "$$subdir" = "."; then \
-	    local_target="$$target-am"; \
-	  else \
-	    local_target="$$target"; \
-	  fi; \
-	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
-	  || eval $$failcom; \
-	done && test -z "$$fail"
-tags-recursive:
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
-	done
-ctags-recursive:
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
-	done
 
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
-	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
-	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	mkid -fID $$unique
-tags: TAGS
-
-TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
-		$(TAGS_FILES) $(LISP)
 	set x; \
 	here=`pwd`; \
 	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
@@ -411,12 +423,7 @@ TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
 	  fi; \
 	done; \
-	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
+	$(am__define_uniq_tagged_files); \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
-	      END { if (nonempty) { for (i in files) print i; }; }'`; \
 	shift; \
 	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 	  test -n "$$unique" || unique=$$empty_fix; \
@@ -428,15 +435,11 @@ TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 	      $$unique; \
 	  fi; \
 	fi
-ctags: CTAGS
+ctags: ctags-recursive
-CTAGS: ctags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
+
-		$(TAGS_FILES) $(LISP)
+CTAGS: ctags
-	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
+ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
-	unique=`for i in $$list; do \
+	$(am__define_uniq_tagged_files); \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
-	      END { if (nonempty) { for (i in files) print i; }; }'`; \
 	test -z "$(CTAGS_ARGS)$$unique" \
 	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
 	     $$unique
@@ -445,6 +448,21 @@ GTAGS:
 	here=`$(am__cd) $(top_builddir) && pwd` \
 	  && $(am__cd) $(top_srcdir) \
 	  && gtags -i $(GTAGS_ARGS) "$$here"
+cscopelist: cscopelist-recursive
+
+cscopelist-am: $(am__tagged_files)
+	list='$(am__tagged_files)'; \
+	case "$(srcdir)" in \
+	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
+	  *) sdir=$(subdir)/$(srcdir) ;; \
+	esac; \
+	for i in $$list; do \
+	  if test -f "$$i"; then \
+	    echo "$(subdir)/$$i"; \
+	  else \
+	    echo "$$sdir/$$i"; \
+	  fi; \
+	done >> $(top_builddir)/cscope.files
 
 distclean-tags:
 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
@@ -605,22 +623,20 @@ ps-am:
 
 uninstall-am:
 
-.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \
+.MAKE: $(am__recursive_targets) install-am install-strip
-	install-am install-strip tags-recursive
 
-.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
+.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am check \
-	all all-am check check-am clean clean-generic clean-libtool \
+	check-am clean clean-generic clean-libtool cscopelist-am ctags \
-	ctags ctags-recursive distclean distclean-generic \
+	ctags-am distclean distclean-generic distclean-libtool \
-	distclean-libtool distclean-tags distdir dvi dvi-am html \
+	distclean-tags distdir dvi dvi-am html html-am info info-am \
-	html-am info info-am install install-am install-data \
+	install install-am install-data install-data-am install-dvi \
-	install-data-am install-dvi install-dvi-am install-exec \
+	install-dvi-am install-exec install-exec-am install-html \
-	install-exec-am install-html install-html-am install-info \
+	install-html-am install-info install-info-am install-man \
-	install-info-am install-man install-pdf install-pdf-am \
+	install-pdf install-pdf-am install-ps install-ps-am \
-	install-ps install-ps-am install-strip installcheck \
+	install-strip installcheck installcheck-am installdirs \
-	installcheck-am installdirs installdirs-am maintainer-clean \
+	installdirs-am maintainer-clean maintainer-clean-generic \
-	maintainer-clean-generic mostlyclean mostlyclean-generic \
+	mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \
-	mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \
+	ps ps-am tags tags-am uninstall uninstall-am
-	uninstall uninstall-am
 
 
 # Tell versions [3.59,3.63) of GNU make to not export all variables.

apps/lighttpd-1.4.32/doc/config/conf.d/Makefile.in

@@ -1,9 +1,8 @@
-# Makefile.in generated by automake 1.11.6 from Makefile.am.
+# Makefile.in generated by automake 1.14.1 from Makefile.am.
 # @configure_input@
 
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# Copyright (C) 1994-2013 Free Software Foundation, Inc.
-# 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software
+
-# Foundation, Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -15,23 +14,51 @@
 
 @SET_MAKE@
 VPATH = @srcdir@
-am__make_dryrun = \
+am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
-  { \
+am__make_running_with_option = \
-    am__dry=no; \
+  case $${target_option-} in \
+      ?) ;; \
+      *) echo "am__make_running_with_option: internal error: invalid" \
+              "target option '$${target_option-}' specified" >&2; \
+         exit 1;; \
+  esac; \
+  has_opt=no; \
+  sane_makeflags=$$MAKEFLAGS; \
+  if $(am__is_gnu_make); then \
+    sane_makeflags=$$MFLAGS; \
+  else \
     case $$MAKEFLAGS in \
       *\\[\ \	]*) \
-        echo 'am--echo: ; @echo "AM"  OK' | $(MAKE) -f - 2>/dev/null \
+        bs=\\; \
-          | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
+        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
-      *) \
+          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
-        for am__flg in $$MAKEFLAGS; do \
-          case $$am__flg in \
-            *=*|--*) ;; \
-            *n*) am__dry=yes; break;; \
     esac; \
-        done;; \
+  fi; \
+  skip_next=no; \
+  strip_trailopt () \
+  { \
+    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+  }; \
+  for flg in $$sane_makeflags; do \
+    test $$skip_next = yes && { skip_next=no; continue; }; \
+    case $$flg in \
+      *=*|--*) continue;; \
+        -*I) strip_trailopt 'I'; skip_next=yes;; \
+      -*I?*) strip_trailopt 'I';; \
+        -*O) strip_trailopt 'O'; skip_next=yes;; \
+      -*O?*) strip_trailopt 'O';; \
+        -*l) strip_trailopt 'l'; skip_next=yes;; \
+      -*l?*) strip_trailopt 'l';; \
+      -[dEDm]) skip_next=yes;; \
+      -[JT]) skip_next=yes;; \
     esac; \
-    test $$am__dry = yes; \
+    case $$flg in \
-  }
+      *$$target_option*) has_opt=yes; break;; \
+    esac; \
+  done; \
+  test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
 pkgdatadir = $(datadir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
 pkglibdir = $(libdir)/@PACKAGE@
@@ -52,7 +79,7 @@ build_triplet = @build@
 host_triplet = @host@
 target_triplet = @target@
 subdir = doc/config/conf.d
-DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
+DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
 am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \
 	$(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
@@ -64,12 +91,18 @@ mkinstalldirs = $(install_sh) -d
 CONFIG_HEADER = $(top_builddir)/config.h
 CONFIG_CLEAN_FILES =
 CONFIG_CLEAN_VPATH_FILES =
+AM_V_P = $(am__v_P_@AM_V@)
+am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
+am__v_P_0 = false
+am__v_P_1 = :
 AM_V_GEN = $(am__v_GEN_@AM_V@)
 am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
 am__v_GEN_0 = @echo "  GEN     " $@;
+am__v_GEN_1 = 
 AM_V_at = $(am__v_at_@AM_V@)
 am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
 am__v_at_0 = @
+am__v_at_1 = 
 SOURCES =
 DIST_SOURCES =
 am__can_run_installinfo = \
@@ -77,6 +110,7 @@ am__can_run_installinfo = \
     n|no|NO) false;; \
     *) (install-info --version) >/dev/null 2>&1;; \
   esac
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
 ACLOCAL = @ACLOCAL@
 AMTAR = @AMTAR@
@@ -297,11 +331,11 @@ mostlyclean-libtool:
 
 clean-libtool:
 	-rm -rf .libs _libs
-tags: TAGS
+tags TAGS:
-TAGS:
 
-ctags: CTAGS
+ctags CTAGS:
-CTAGS:
+
+cscope cscopelist:
 
 
 distdir: $(DISTFILES)
@@ -437,15 +471,16 @@ uninstall-am:
 .MAKE: install-am install-strip
 
 .PHONY: all all-am check check-am clean clean-generic clean-libtool \
-	distclean distclean-generic distclean-libtool distdir dvi \
+	cscopelist-am ctags-am distclean distclean-generic \
-	dvi-am html html-am info info-am install install-am \
+	distclean-libtool distdir dvi dvi-am html html-am info info-am \
-	install-data install-data-am install-dvi install-dvi-am \
+	install install-am install-data install-data-am install-dvi \
-	install-exec install-exec-am install-html install-html-am \
+	install-dvi-am install-exec install-exec-am install-html \
-	install-info install-info-am install-man install-pdf \
+	install-html-am install-info install-info-am install-man \
-	install-pdf-am install-ps install-ps-am install-strip \
+	install-pdf install-pdf-am install-ps install-ps-am \
-	installcheck installcheck-am installdirs maintainer-clean \
+	install-strip installcheck installcheck-am installdirs \
-	maintainer-clean-generic mostlyclean mostlyclean-generic \
+	maintainer-clean maintainer-clean-generic mostlyclean \
-	mostlyclean-libtool pdf pdf-am ps ps-am uninstall uninstall-am
+	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
+	tags-am uninstall uninstall-am
 
 
 # Tell versions [3.59,3.63) of GNU make to not export all variables.

apps/lighttpd-1.4.32/doc/config/vhosts.d/Makefile.in

@@ -1,9 +1,8 @@
-# Makefile.in generated by automake 1.11.6 from Makefile.am.
+# Makefile.in generated by automake 1.14.1 from Makefile.am.
 # @configure_input@
 
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# Copyright (C) 1994-2013 Free Software Foundation, Inc.
-# 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software
+
-# Foundation, Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -15,23 +14,51 @@
 
 @SET_MAKE@
 VPATH = @srcdir@
-am__make_dryrun = \
+am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
-  { \
+am__make_running_with_option = \
-    am__dry=no; \
+  case $${target_option-} in \
+      ?) ;; \
+      *) echo "am__make_running_with_option: internal error: invalid" \
+              "target option '$${target_option-}' specified" >&2; \
+         exit 1;; \
+  esac; \
+  has_opt=no; \
+  sane_makeflags=$$MAKEFLAGS; \
+  if $(am__is_gnu_make); then \
+    sane_makeflags=$$MFLAGS; \
+  else \
     case $$MAKEFLAGS in \
       *\\[\ \	]*) \
-        echo 'am--echo: ; @echo "AM"  OK' | $(MAKE) -f - 2>/dev/null \
+        bs=\\; \
-          | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
+        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
-      *) \
+          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
-        for am__flg in $$MAKEFLAGS; do \
-          case $$am__flg in \
-            *=*|--*) ;; \
-            *n*) am__dry=yes; break;; \
     esac; \
-        done;; \
+  fi; \
+  skip_next=no; \
+  strip_trailopt () \
+  { \
+    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+  }; \
+  for flg in $$sane_makeflags; do \
+    test $$skip_next = yes && { skip_next=no; continue; }; \
+    case $$flg in \
+      *=*|--*) continue;; \
+        -*I) strip_trailopt 'I'; skip_next=yes;; \
+      -*I?*) strip_trailopt 'I';; \
+        -*O) strip_trailopt 'O'; skip_next=yes;; \
+      -*O?*) strip_trailopt 'O';; \
+        -*l) strip_trailopt 'l'; skip_next=yes;; \
+      -*l?*) strip_trailopt 'l';; \
+      -[dEDm]) skip_next=yes;; \
+      -[JT]) skip_next=yes;; \
     esac; \
-    test $$am__dry = yes; \
+    case $$flg in \
-  }
+      *$$target_option*) has_opt=yes; break;; \
+    esac; \
+  done; \
+  test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
 pkgdatadir = $(datadir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
 pkglibdir = $(libdir)/@PACKAGE@
@@ -52,7 +79,7 @@ build_triplet = @build@
 host_triplet = @host@
 target_triplet = @target@
 subdir = doc/config/vhosts.d
-DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
+DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
 am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \
 	$(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
@@ -64,12 +91,18 @@ mkinstalldirs = $(install_sh) -d
 CONFIG_HEADER = $(top_builddir)/config.h
 CONFIG_CLEAN_FILES =
 CONFIG_CLEAN_VPATH_FILES =
+AM_V_P = $(am__v_P_@AM_V@)
+am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
+am__v_P_0 = false
+am__v_P_1 = :
 AM_V_GEN = $(am__v_GEN_@AM_V@)
 am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
 am__v_GEN_0 = @echo "  GEN     " $@;
+am__v_GEN_1 = 
 AM_V_at = $(am__v_at_@AM_V@)
 am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
 am__v_at_0 = @
+am__v_at_1 = 
 SOURCES =
 DIST_SOURCES =
 am__can_run_installinfo = \
@@ -77,6 +110,7 @@ am__can_run_installinfo = \
     n|no|NO) false;; \
     *) (install-info --version) >/dev/null 2>&1;; \
   esac
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
 ACLOCAL = @ACLOCAL@
 AMTAR = @AMTAR@
@@ -272,11 +306,11 @@ mostlyclean-libtool:
 
 clean-libtool:
 	-rm -rf .libs _libs
-tags: TAGS
+tags TAGS:
-TAGS:
 
-ctags: CTAGS
+ctags CTAGS:
-CTAGS:
+
+cscope cscopelist:
 
 
 distdir: $(DISTFILES)
@@ -412,15 +446,16 @@ uninstall-am:
 .MAKE: install-am install-strip
 
 .PHONY: all all-am check check-am clean clean-generic clean-libtool \
-	distclean distclean-generic distclean-libtool distdir dvi \
+	cscopelist-am ctags-am distclean distclean-generic \
-	dvi-am html html-am info info-am install install-am \
+	distclean-libtool distdir dvi dvi-am html html-am info info-am \
-	install-data install-data-am install-dvi install-dvi-am \
+	install install-am install-data install-data-am install-dvi \
-	install-exec install-exec-am install-html install-html-am \
+	install-dvi-am install-exec install-exec-am install-html \
-	install-info install-info-am install-man install-pdf \
+	install-html-am install-info install-info-am install-man \
-	install-pdf-am install-ps install-ps-am install-strip \
+	install-pdf install-pdf-am install-ps install-ps-am \
-	installcheck installcheck-am installdirs maintainer-clean \
+	install-strip installcheck installcheck-am installdirs \
-	maintainer-clean-generic mostlyclean mostlyclean-generic \
+	maintainer-clean maintainer-clean-generic mostlyclean \
-	mostlyclean-libtool pdf pdf-am ps ps-am uninstall uninstall-am
+	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
+	tags-am uninstall uninstall-am
 
 
 # Tell versions [3.59,3.63) of GNU make to not export all variables.

apps/lighttpd-1.4.32/doc/initscripts/Makefile.in

@@ -1,9 +1,8 @@
-# Makefile.in generated by automake 1.11.6 from Makefile.am.
+# Makefile.in generated by automake 1.14.1 from Makefile.am.
 # @configure_input@
 
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# Copyright (C) 1994-2013 Free Software Foundation, Inc.
-# 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software
+
-# Foundation, Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -15,23 +14,51 @@
 
 @SET_MAKE@
 VPATH = @srcdir@
-am__make_dryrun = \
+am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
-  { \
+am__make_running_with_option = \
-    am__dry=no; \
+  case $${target_option-} in \
+      ?) ;; \
+      *) echo "am__make_running_with_option: internal error: invalid" \
+              "target option '$${target_option-}' specified" >&2; \
+         exit 1;; \
+  esac; \
+  has_opt=no; \
+  sane_makeflags=$$MAKEFLAGS; \
+  if $(am__is_gnu_make); then \
+    sane_makeflags=$$MFLAGS; \
+  else \
     case $$MAKEFLAGS in \
       *\\[\ \	]*) \
-        echo 'am--echo: ; @echo "AM"  OK' | $(MAKE) -f - 2>/dev/null \
+        bs=\\; \
-          | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
+        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
-      *) \
+          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
-        for am__flg in $$MAKEFLAGS; do \
-          case $$am__flg in \
-            *=*|--*) ;; \
-            *n*) am__dry=yes; break;; \
     esac; \
-        done;; \
+  fi; \
+  skip_next=no; \
+  strip_trailopt () \
+  { \
+    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+  }; \
+  for flg in $$sane_makeflags; do \
+    test $$skip_next = yes && { skip_next=no; continue; }; \
+    case $$flg in \
+      *=*|--*) continue;; \
+        -*I) strip_trailopt 'I'; skip_next=yes;; \
+      -*I?*) strip_trailopt 'I';; \
+        -*O) strip_trailopt 'O'; skip_next=yes;; \
+      -*O?*) strip_trailopt 'O';; \
+        -*l) strip_trailopt 'l'; skip_next=yes;; \
+      -*l?*) strip_trailopt 'l';; \
+      -[dEDm]) skip_next=yes;; \
+      -[JT]) skip_next=yes;; \
     esac; \
-    test $$am__dry = yes; \
+    case $$flg in \
-  }
+      *$$target_option*) has_opt=yes; break;; \
+    esac; \
+  done; \
+  test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
 pkgdatadir = $(datadir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
 pkglibdir = $(libdir)/@PACKAGE@
@@ -52,7 +79,7 @@ build_triplet = @build@
 host_triplet = @host@
 target_triplet = @target@
 subdir = doc/initscripts
-DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
+DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
 am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \
 	$(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
@@ -64,12 +91,18 @@ mkinstalldirs = $(install_sh) -d
 CONFIG_HEADER = $(top_builddir)/config.h
 CONFIG_CLEAN_FILES =
 CONFIG_CLEAN_VPATH_FILES =
+AM_V_P = $(am__v_P_@AM_V@)
+am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
+am__v_P_0 = false
+am__v_P_1 = :
 AM_V_GEN = $(am__v_GEN_@AM_V@)
 am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
 am__v_GEN_0 = @echo "  GEN     " $@;
+am__v_GEN_1 = 
 AM_V_at = $(am__v_at_@AM_V@)
 am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
 am__v_at_0 = @
+am__v_at_1 = 
 SOURCES =
 DIST_SOURCES =
 am__can_run_installinfo = \
@@ -77,6 +110,7 @@ am__can_run_installinfo = \
     n|no|NO) false;; \
     *) (install-info --version) >/dev/null 2>&1;; \
   esac
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
 ACLOCAL = @ACLOCAL@
 AMTAR = @AMTAR@
@@ -272,11 +306,11 @@ mostlyclean-libtool:
 
 clean-libtool:
 	-rm -rf .libs _libs
-tags: TAGS
+tags TAGS:
-TAGS:
 
-ctags: CTAGS
+ctags CTAGS:
-CTAGS:
+
+cscope cscopelist:
 
 
 distdir: $(DISTFILES)
@@ -412,15 +446,16 @@ uninstall-am:
 .MAKE: install-am install-strip
 
 .PHONY: all all-am check check-am clean clean-generic clean-libtool \
-	distclean distclean-generic distclean-libtool distdir dvi \
+	cscopelist-am ctags-am distclean distclean-generic \
-	dvi-am html html-am info info-am install install-am \
+	distclean-libtool distdir dvi dvi-am html html-am info info-am \
-	install-data install-data-am install-dvi install-dvi-am \
+	install install-am install-data install-data-am install-dvi \
-	install-exec install-exec-am install-html install-html-am \
+	install-dvi-am install-exec install-exec-am install-html \
-	install-info install-info-am install-man install-pdf \
+	install-html-am install-info install-info-am install-man \
-	install-pdf-am install-ps install-ps-am install-strip \
+	install-pdf install-pdf-am install-ps install-ps-am \
-	installcheck installcheck-am installdirs maintainer-clean \
+	install-strip installcheck installcheck-am installdirs \
-	maintainer-clean-generic mostlyclean mostlyclean-generic \
+	maintainer-clean maintainer-clean-generic mostlyclean \
-	mostlyclean-libtool pdf pdf-am ps ps-am uninstall uninstall-am
+	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
+	tags-am uninstall uninstall-am
 
 
 # Tell versions [3.59,3.63) of GNU make to not export all variables.

apps/lighttpd-1.4.32/doc/outdated/Makefile.in

@@ -1,9 +1,8 @@
-# Makefile.in generated by automake 1.11.6 from Makefile.am.
+# Makefile.in generated by automake 1.14.1 from Makefile.am.
 # @configure_input@
 
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# Copyright (C) 1994-2013 Free Software Foundation, Inc.
-# 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software
+
-# Foundation, Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -15,23 +14,51 @@
 
 @SET_MAKE@
 VPATH = @srcdir@
-am__make_dryrun = \
+am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
-  { \
+am__make_running_with_option = \
-    am__dry=no; \
+  case $${target_option-} in \
+      ?) ;; \
+      *) echo "am__make_running_with_option: internal error: invalid" \
+              "target option '$${target_option-}' specified" >&2; \
+         exit 1;; \
+  esac; \
+  has_opt=no; \
+  sane_makeflags=$$MAKEFLAGS; \
+  if $(am__is_gnu_make); then \
+    sane_makeflags=$$MFLAGS; \
+  else \
     case $$MAKEFLAGS in \
       *\\[\ \	]*) \
-        echo 'am--echo: ; @echo "AM"  OK' | $(MAKE) -f - 2>/dev/null \
+        bs=\\; \
-          | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
+        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
-      *) \
+          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
-        for am__flg in $$MAKEFLAGS; do \
-          case $$am__flg in \
-            *=*|--*) ;; \
-            *n*) am__dry=yes; break;; \
     esac; \
-        done;; \
+  fi; \
+  skip_next=no; \
+  strip_trailopt () \
+  { \
+    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+  }; \
+  for flg in $$sane_makeflags; do \
+    test $$skip_next = yes && { skip_next=no; continue; }; \
+    case $$flg in \
+      *=*|--*) continue;; \
+        -*I) strip_trailopt 'I'; skip_next=yes;; \
+      -*I?*) strip_trailopt 'I';; \
+        -*O) strip_trailopt 'O'; skip_next=yes;; \
+      -*O?*) strip_trailopt 'O';; \
+        -*l) strip_trailopt 'l'; skip_next=yes;; \
+      -*l?*) strip_trailopt 'l';; \
+      -[dEDm]) skip_next=yes;; \
+      -[JT]) skip_next=yes;; \
     esac; \
-    test $$am__dry = yes; \
+    case $$flg in \
-  }
+      *$$target_option*) has_opt=yes; break;; \
+    esac; \
+  done; \
+  test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
 pkgdatadir = $(datadir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
 pkglibdir = $(libdir)/@PACKAGE@
@@ -52,7 +79,7 @@ build_triplet = @build@
 host_triplet = @host@
 target_triplet = @target@
 subdir = doc/outdated
-DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
+DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
 am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \
 	$(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
@@ -64,12 +91,18 @@ mkinstalldirs = $(install_sh) -d
 CONFIG_HEADER = $(top_builddir)/config.h
 CONFIG_CLEAN_FILES =
 CONFIG_CLEAN_VPATH_FILES =
+AM_V_P = $(am__v_P_@AM_V@)
+am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
+am__v_P_0 = false
+am__v_P_1 = :
 AM_V_GEN = $(am__v_GEN_@AM_V@)
 am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
 am__v_GEN_0 = @echo "  GEN     " $@;
+am__v_GEN_1 = 
 AM_V_at = $(am__v_at_@AM_V@)
 am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
 am__v_at_0 = @
+am__v_at_1 = 
 SOURCES =
 DIST_SOURCES =
 am__can_run_installinfo = \
@@ -77,6 +110,7 @@ am__can_run_installinfo = \
     n|no|NO) false;; \
     *) (install-info --version) >/dev/null 2>&1;; \
   esac
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
 ACLOCAL = @ACLOCAL@
 AMTAR = @AMTAR@
@@ -352,11 +386,11 @@ mostlyclean-libtool:
 
 clean-libtool:
 	-rm -rf .libs _libs
-tags: TAGS
+tags TAGS:
-TAGS:
 
-ctags: CTAGS
+ctags CTAGS:
-CTAGS:
+
+cscope cscopelist:
 
 
 distdir: $(DISTFILES)
@@ -492,16 +526,16 @@ uninstall-am:
 .MAKE: install-am install-strip
 
 .PHONY: all all-am check check-am clean clean-generic clean-libtool \
-	clean-local distclean distclean-generic distclean-libtool \
+	clean-local cscopelist-am ctags-am distclean distclean-generic \
-	distdir dvi dvi-am html html-am html-local info info-am \
+	distclean-libtool distdir dvi dvi-am html html-am html-local \
-	install install-am install-data install-data-am install-dvi \
+	info info-am install install-am install-data install-data-am \
-	install-dvi-am install-exec install-exec-am install-html \
+	install-dvi install-dvi-am install-exec install-exec-am \
-	install-html-am install-info install-info-am install-man \
+	install-html install-html-am install-info install-info-am \
-	install-pdf install-pdf-am install-ps install-ps-am \
+	install-man install-pdf install-pdf-am install-ps \
-	install-strip installcheck installcheck-am installdirs \
+	install-ps-am install-strip installcheck installcheck-am \
-	maintainer-clean maintainer-clean-generic mostlyclean \
+	installdirs maintainer-clean maintainer-clean-generic \
-	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
+	mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \
-	uninstall uninstall-am
+	ps ps-am tags-am uninstall uninstall-am
 
 
 .txt.html:

apps/lighttpd-1.4.32/doc/scripts/Makefile.in

@@ -1,9 +1,8 @@
-# Makefile.in generated by automake 1.11.6 from Makefile.am.
+# Makefile.in generated by automake 1.14.1 from Makefile.am.
 # @configure_input@
 
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# Copyright (C) 1994-2013 Free Software Foundation, Inc.
-# 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software
+
-# Foundation, Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -15,23 +14,51 @@
 
 @SET_MAKE@
 VPATH = @srcdir@
-am__make_dryrun = \
+am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
-  { \
+am__make_running_with_option = \
-    am__dry=no; \
+  case $${target_option-} in \
+      ?) ;; \
+      *) echo "am__make_running_with_option: internal error: invalid" \
+              "target option '$${target_option-}' specified" >&2; \
+         exit 1;; \
+  esac; \
+  has_opt=no; \
+  sane_makeflags=$$MAKEFLAGS; \
+  if $(am__is_gnu_make); then \
+    sane_makeflags=$$MFLAGS; \
+  else \
     case $$MAKEFLAGS in \
       *\\[\ \	]*) \
-        echo 'am--echo: ; @echo "AM"  OK' | $(MAKE) -f - 2>/dev/null \
+        bs=\\; \
-          | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
+        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
-      *) \
+          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
-        for am__flg in $$MAKEFLAGS; do \
-          case $$am__flg in \
-            *=*|--*) ;; \
-            *n*) am__dry=yes; break;; \
     esac; \
-        done;; \
+  fi; \
+  skip_next=no; \
+  strip_trailopt () \
+  { \
+    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+  }; \
+  for flg in $$sane_makeflags; do \
+    test $$skip_next = yes && { skip_next=no; continue; }; \
+    case $$flg in \
+      *=*|--*) continue;; \
+        -*I) strip_trailopt 'I'; skip_next=yes;; \
+      -*I?*) strip_trailopt 'I';; \
+        -*O) strip_trailopt 'O'; skip_next=yes;; \
+      -*O?*) strip_trailopt 'O';; \
+        -*l) strip_trailopt 'l'; skip_next=yes;; \
+      -*l?*) strip_trailopt 'l';; \
+      -[dEDm]) skip_next=yes;; \
+      -[JT]) skip_next=yes;; \
     esac; \
-    test $$am__dry = yes; \
+    case $$flg in \
-  }
+      *$$target_option*) has_opt=yes; break;; \
+    esac; \
+  done; \
+  test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
 pkgdatadir = $(datadir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
 pkglibdir = $(libdir)/@PACKAGE@
@@ -52,7 +79,7 @@ build_triplet = @build@
 host_triplet = @host@
 target_triplet = @target@
 subdir = doc/scripts
-DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
+DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
 am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \
 	$(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
@@ -64,12 +91,18 @@ mkinstalldirs = $(install_sh) -d
 CONFIG_HEADER = $(top_builddir)/config.h
 CONFIG_CLEAN_FILES =
 CONFIG_CLEAN_VPATH_FILES =
+AM_V_P = $(am__v_P_@AM_V@)
+am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
+am__v_P_0 = false
+am__v_P_1 = :
 AM_V_GEN = $(am__v_GEN_@AM_V@)
 am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
 am__v_GEN_0 = @echo "  GEN     " $@;
+am__v_GEN_1 = 
 AM_V_at = $(am__v_at_@AM_V@)
 am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
 am__v_at_0 = @
+am__v_at_1 = 
 SOURCES =
 DIST_SOURCES =
 am__can_run_installinfo = \
@@ -77,6 +110,7 @@ am__can_run_installinfo = \
     n|no|NO) false;; \
     *) (install-info --version) >/dev/null 2>&1;; \
   esac
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
 ACLOCAL = @ACLOCAL@
 AMTAR = @AMTAR@
@@ -275,11 +309,11 @@ mostlyclean-libtool:
 
 clean-libtool:
 	-rm -rf .libs _libs
-tags: TAGS
+tags TAGS:
-TAGS:
 
-ctags: CTAGS
+ctags CTAGS:
-CTAGS:
+
+cscope cscopelist:
 
 
 distdir: $(DISTFILES)
@@ -415,15 +449,16 @@ uninstall-am:
 .MAKE: install-am install-strip
 
 .PHONY: all all-am check check-am clean clean-generic clean-libtool \
-	distclean distclean-generic distclean-libtool distdir dvi \
+	cscopelist-am ctags-am distclean distclean-generic \
-	dvi-am html html-am info info-am install install-am \
+	distclean-libtool distdir dvi dvi-am html html-am info info-am \
-	install-data install-data-am install-dvi install-dvi-am \
+	install install-am install-data install-data-am install-dvi \
-	install-exec install-exec-am install-html install-html-am \
+	install-dvi-am install-exec install-exec-am install-html \
-	install-info install-info-am install-man install-pdf \
+	install-html-am install-info install-info-am install-man \
-	install-pdf-am install-ps install-ps-am install-strip \
+	install-pdf install-pdf-am install-ps install-ps-am \
-	installcheck installcheck-am installdirs maintainer-clean \
+	install-strip installcheck installcheck-am installdirs \
-	maintainer-clean-generic mostlyclean mostlyclean-generic \
+	maintainer-clean maintainer-clean-generic mostlyclean \
-	mostlyclean-libtool pdf pdf-am ps ps-am uninstall uninstall-am
+	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
+	tags-am uninstall uninstall-am
 
 
 # Tell versions [3.59,3.63) of GNU make to not export all variables.

apps/lighttpd-1.4.32/doc/systemd/Makefile.in

@@ -1,9 +1,8 @@
-# Makefile.in generated by automake 1.11.6 from Makefile.am.
+# Makefile.in generated by automake 1.14.1 from Makefile.am.
 # @configure_input@
 
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# Copyright (C) 1994-2013 Free Software Foundation, Inc.
-# 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software
+
-# Foundation, Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -15,23 +14,51 @@
 
 @SET_MAKE@
 VPATH = @srcdir@
-am__make_dryrun = \
+am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
-  { \
+am__make_running_with_option = \
-    am__dry=no; \
+  case $${target_option-} in \
+      ?) ;; \
+      *) echo "am__make_running_with_option: internal error: invalid" \
+              "target option '$${target_option-}' specified" >&2; \
+         exit 1;; \
+  esac; \
+  has_opt=no; \
+  sane_makeflags=$$MAKEFLAGS; \
+  if $(am__is_gnu_make); then \
+    sane_makeflags=$$MFLAGS; \
+  else \
     case $$MAKEFLAGS in \
       *\\[\ \	]*) \
-        echo 'am--echo: ; @echo "AM"  OK' | $(MAKE) -f - 2>/dev/null \
+        bs=\\; \
-          | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
+        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
-      *) \
+          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
-        for am__flg in $$MAKEFLAGS; do \
-          case $$am__flg in \
-            *=*|--*) ;; \
-            *n*) am__dry=yes; break;; \
     esac; \
-        done;; \
+  fi; \
+  skip_next=no; \
+  strip_trailopt () \
+  { \
+    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+  }; \
+  for flg in $$sane_makeflags; do \
+    test $$skip_next = yes && { skip_next=no; continue; }; \
+    case $$flg in \
+      *=*|--*) continue;; \
+        -*I) strip_trailopt 'I'; skip_next=yes;; \
+      -*I?*) strip_trailopt 'I';; \
+        -*O) strip_trailopt 'O'; skip_next=yes;; \
+      -*O?*) strip_trailopt 'O';; \
+        -*l) strip_trailopt 'l'; skip_next=yes;; \
+      -*l?*) strip_trailopt 'l';; \
+      -[dEDm]) skip_next=yes;; \
+      -[JT]) skip_next=yes;; \
     esac; \
-    test $$am__dry = yes; \
+    case $$flg in \
-  }
+      *$$target_option*) has_opt=yes; break;; \
+    esac; \
+  done; \
+  test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
 pkgdatadir = $(datadir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
 pkglibdir = $(libdir)/@PACKAGE@
@@ -52,7 +79,7 @@ build_triplet = @build@
 host_triplet = @host@
 target_triplet = @target@
 subdir = doc/systemd
-DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
+DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
 am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \
 	$(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
@@ -64,12 +91,18 @@ mkinstalldirs = $(install_sh) -d
 CONFIG_HEADER = $(top_builddir)/config.h
 CONFIG_CLEAN_FILES =
 CONFIG_CLEAN_VPATH_FILES =
+AM_V_P = $(am__v_P_@AM_V@)
+am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
+am__v_P_0 = false
+am__v_P_1 = :
 AM_V_GEN = $(am__v_GEN_@AM_V@)
 am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
 am__v_GEN_0 = @echo "  GEN     " $@;
+am__v_GEN_1 = 
 AM_V_at = $(am__v_at_@AM_V@)
 am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
 am__v_at_0 = @
+am__v_at_1 = 
 SOURCES =
 DIST_SOURCES =
 am__can_run_installinfo = \
@@ -77,6 +110,7 @@ am__can_run_installinfo = \
     n|no|NO) false;; \
     *) (install-info --version) >/dev/null 2>&1;; \
   esac
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
 ACLOCAL = @ACLOCAL@
 AMTAR = @AMTAR@
@@ -272,11 +306,11 @@ mostlyclean-libtool:
 
 clean-libtool:
 	-rm -rf .libs _libs
-tags: TAGS
+tags TAGS:
-TAGS:
 
-ctags: CTAGS
+ctags CTAGS:
-CTAGS:
+
+cscope cscopelist:
 
 
 distdir: $(DISTFILES)
@@ -412,15 +446,16 @@ uninstall-am:
 .MAKE: install-am install-strip
 
 .PHONY: all all-am check check-am clean clean-generic clean-libtool \
-	distclean distclean-generic distclean-libtool distdir dvi \
+	cscopelist-am ctags-am distclean distclean-generic \
-	dvi-am html html-am info info-am install install-am \
+	distclean-libtool distdir dvi dvi-am html html-am info info-am \
-	install-data install-data-am install-dvi install-dvi-am \
+	install install-am install-data install-data-am install-dvi \
-	install-exec install-exec-am install-html install-html-am \
+	install-dvi-am install-exec install-exec-am install-html \
-	install-info install-info-am install-man install-pdf \
+	install-html-am install-info install-info-am install-man \
-	install-pdf-am install-ps install-ps-am install-strip \
+	install-pdf install-pdf-am install-ps install-ps-am \
-	installcheck installcheck-am installdirs maintainer-clean \
+	install-strip installcheck installcheck-am installdirs \
-	maintainer-clean-generic mostlyclean mostlyclean-generic \
+	maintainer-clean maintainer-clean-generic mostlyclean \
-	mostlyclean-libtool pdf pdf-am ps ps-am uninstall uninstall-am
+	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
+	tags-am uninstall uninstall-am
 
 
 # Tell versions [3.59,3.63) of GNU make to not export all variables.

apps/lighttpd-1.4.32/install-sh

@@ -1,7 +1,7 @@
 #!/bin/sh
 # install - install a program, script, or datafile
 
-scriptversion=2011-01-19.21; # UTC
+scriptversion=2011-11-20.07; # UTC
 
 # This originates from X11R5 (mit/util/scripts/install.sh), which was
 # later released in X11R6 (xc/config/util/install.sh) with the
@@ -35,7 +35,7 @@ scriptversion=2011-01-19.21; # UTC
 # FSF changes to this file are in the public domain.
 #
 # Calling this script install-sh is preferred over install.sh, to prevent
-# `make' implicit rules from creating a file called install from it
+# 'make' implicit rules from creating a file called install from it
 # when there is no Makefile.
 #
 # This script is compatible with the BSD install script, but was written
@@ -156,7 +156,7 @@ while test $# -ne 0; do
     -s) stripcmd=$stripprog;;
 
     -t) dst_arg=$2
-	# Protect names problematic for `test' and other utilities.
+	# Protect names problematic for 'test' and other utilities.
 	case $dst_arg in
 	  -* | [=\(\)!]) dst_arg=./$dst_arg;;
 	esac
@@ -190,7 +190,7 @@ if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then
     fi
     shift # arg
     dst_arg=$arg
-    # Protect names problematic for `test' and other utilities.
+    # Protect names problematic for 'test' and other utilities.
     case $dst_arg in
       -* | [=\(\)!]) dst_arg=./$dst_arg;;
     esac
@@ -202,7 +202,7 @@ if test $# -eq 0; then
     echo "$0: no input file specified." >&2
     exit 1
   fi
-  # It's OK to call `install-sh -d' without argument.
+  # It's OK to call 'install-sh -d' without argument.
   # This can happen when creating conditional directories.
   exit 0
 fi
@@ -240,7 +240,7 @@ fi
 
 for src
 do
-  # Protect names problematic for `test' and other utilities.
+  # Protect names problematic for 'test' and other utilities.
   case $src in
     -* | [=\(\)!]) src=./$src;;
   esac
@@ -354,7 +354,7 @@ do
 	      if test -z "$dir_arg" || {
 		   # Check for POSIX incompatibilities with -m.
 		   # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
-		   # other-writeable bit of parent directory when it shouldn't.
+		   # other-writable bit of parent directory when it shouldn't.
 		   # FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
 		   ls_ld_tmpdir=`ls -ld "$tmpdir"`
 		   case $ls_ld_tmpdir in

apps/lighttpd-1.4.32/ltmain.sh

@@ -70,7 +70,7 @@
 #         compiler:		$LTCC
 #         compiler flags:		$LTCFLAGS
 #         linker:		$LD (gnu? $with_gnu_ld)
-#         $progname:	(GNU libtool) 2.4.2 Debian-2.4.2-1.1
+#         $progname:	(GNU libtool) 2.4.2 Debian-2.4.2-1.7ubuntu1
 #         automake:	$automake_version
 #         autoconf:	$autoconf_version
 #
@@ -80,7 +80,7 @@
 
 PROGRAM=libtool
 PACKAGE=libtool
-VERSION="2.4.2 Debian-2.4.2-1.1"
+VERSION="2.4.2 Debian-2.4.2-1.7ubuntu1"
 TIMESTAMP=""
 package_revision=1.3337
 

apps/lighttpd-1.4.32/m4/libtool.m4

@@ -1312,7 +1312,7 @@ ia64-*-hpux*)
   rm -rf conftest*
   ;;
 
-x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \
+x86_64-*kfreebsd*-gnu|x86_64-*linux*|powerpc*-*linux*| \
 s390*-*linux*|s390*-*tpf*|sparc*-*linux*)
   # Find out which ABI we are using.
   echo 'int i;' > conftest.$ac_ext
@@ -1324,9 +1324,19 @@ s390*-*linux*|s390*-*tpf*|sparc*-*linux*)
 	    LD="${LD-ld} -m elf_i386_fbsd"
 	    ;;
 	  x86_64-*linux*)
+	    case `/usr/bin/file conftest.o` in
+	      *x86-64*)
+		LD="${LD-ld} -m elf32_x86_64"
+		;;
+	      *)
 		LD="${LD-ld} -m elf_i386"
 		;;
-	  ppc64-*linux*|powerpc64-*linux*)
+	    esac
+	    ;;
+	  powerpc64le-*)
+	    LD="${LD-ld} -m elf32lppclinux"
+	    ;;
+	  powerpc64-*)
 	    LD="${LD-ld} -m elf32ppclinux"
 	    ;;
 	  s390x-*linux*)
@@ -1345,7 +1355,10 @@ s390*-*linux*|s390*-*tpf*|sparc*-*linux*)
 	  x86_64-*linux*)
 	    LD="${LD-ld} -m elf_x86_64"
 	    ;;
-	  ppc*-*linux*|powerpc*-*linux*)
+	  powerpcle-*)
+	    LD="${LD-ld} -m elf64lppc"
+	    ;;
+	  powerpc-*)
 	    LD="${LD-ld} -m elf64ppc"
 	    ;;
 	  s390*-*linux*|s390*-*tpf*)
@@ -1688,7 +1701,8 @@ AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl
     ;;
   *)
     lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null`
-    if test -n "$lt_cv_sys_max_cmd_len"; then
+    if test -n "$lt_cv_sys_max_cmd_len" && \
+	test undefined != "$lt_cv_sys_max_cmd_len"; then
       lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
       lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
     else

apps/lighttpd-1.4.32/missing

@@ -1,11 +1,10 @@
 #! /bin/sh
-# Common stub for a few missing GNU programs while installing.
+# Common wrapper for a few potentially missing GNU programs.
 
-scriptversion=2012-01-06.13; # UTC
+scriptversion=2013-10-28.13; # UTC
 
-# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005, 2006,
+# Copyright (C) 1996-2013 Free Software Foundation, Inc.
-# 2008, 2009, 2010, 2011, 2012 Free Software Foundation, Inc.
+# Originally written by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
-# Originally by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
 
 # This program is free software; you can redistribute it and/or modify
 # it under the terms of the GNU General Public License as published by
@@ -26,68 +25,40 @@ scriptversion=2012-01-06.13; # UTC
 # the same distribution terms that you use for the rest of that program.
 
 if test $# -eq 0; then
-  echo 1>&2 "Try \`$0 --help' for more information"
+  echo 1>&2 "Try '$0 --help' for more information"
   exit 1
 fi
 
-run=:
-sed_output='s/.* --output[ =]\([^ ]*\).*/\1/p'
-sed_minuso='s/.* -o \([^ ]*\).*/\1/p'
-
-# In the cases where this matters, `missing' is being run in the
-# srcdir already.
-if test -f configure.ac; then
-  configure_ac=configure.ac
-else
-  configure_ac=configure.in
-fi
-
-msg="missing on your system"
-
 case $1 in
---run)
+
-  # Try to run requested program, and just exit if it succeeds.
+  --is-lightweight)
-  run=
+    # Used by our autoconf macros to check whether the available missing
+    # script is modern enough.
+    exit 0
+    ;;
+
+  --run)
+    # Back-compat with the calling convention used by older automake.
     shift
-  "$@" && exit 0
-  # Exit code 63 means version mismatch.  This often happens
-  # when the user try to use an ancient version of a tool on
-  # a file that requires a minimum version.  In this case we
-  # we should proceed has if the program had been absent, or
-  # if --run hadn't been passed.
-  if test $? = 63; then
-    run=:
-    msg="probably too old"
-  fi
     ;;
 
   -h|--h|--he|--hel|--help)
     echo "\
 $0 [OPTION]... PROGRAM [ARGUMENT]...
 
-Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an
+Run 'PROGRAM [ARGUMENT]...', returning a proper advice when this fails due
-error status if there is no known handling for PROGRAM.
+to PROGRAM being missing or too old.
 
 Options:
   -h, --help      display this help and exit
   -v, --version   output version information and exit
-  --run           try to run the given command, and emulate it if it fails
 
 Supported PROGRAM values:
-  aclocal      touch file \`aclocal.m4'
+  aclocal   autoconf  autoheader   autom4te  automake  makeinfo
-  autoconf     touch file \`configure'
+  bison     yacc      flex         lex       help2man
-  autoheader   touch file \`config.h.in'
-  autom4te     touch the output file, or create a stub one
-  automake     touch all \`Makefile.in' files
-  bison        create \`y.tab.[ch]', if possible, from existing .[ch]
-  flex         create \`lex.yy.c', if possible, from existing .c
-  help2man     touch the output file
-  lex          create \`lex.yy.c', if possible, from existing .c
-  makeinfo     touch the output file
-  yacc         create \`y.tab.[ch]', if possible, from existing .[ch]
 
-Version suffixes to PROGRAM as well as the prefixes \`gnu-', \`gnu', and
+Version suffixes to PROGRAM as well as the prefixes 'gnu-', 'gnu', and
-\`g' are ignored when checking the name.
+'g' are ignored when checking the name.
 
 Send bug reports to <bug-automake@gnu.org>."
     exit $?
@@ -99,228 +70,141 @@ Send bug reports to <bug-automake@gnu.org>."
     ;;
 
   -*)
-    echo 1>&2 "$0: Unknown \`$1' option"
+    echo 1>&2 "$0: unknown '$1' option"
-    echo 1>&2 "Try \`$0 --help' for more information"
+    echo 1>&2 "Try '$0 --help' for more information"
     exit 1
     ;;
 
 esac
 
-# normalize program name to check for.
+# Run the given program, remember its exit status.
-program=`echo "$1" | sed '
+"$@"; st=$?
+
+# If it succeeded, we are done.
+test $st -eq 0 && exit 0
+
+# Also exit now if we it failed (or wasn't found), and '--version' was
+# passed; such an option is passed most likely to detect whether the
+# program is present and works.
+case $2 in --version|--help) exit $st;; esac
+
+# Exit code 63 means version mismatch.  This often happens when the user
+# tries to use an ancient version of a tool on a file that requires a
+# minimum version.
+if test $st -eq 63; then
+  msg="probably too old"
+elif test $st -eq 127; then
+  # Program was missing.
+  msg="missing on your system"
+else
+  # Program was found and executed, but failed.  Give up.
+  exit $st
+fi
+
+perl_URL=http://www.perl.org/
+flex_URL=http://flex.sourceforge.net/
+gnu_software_URL=http://www.gnu.org/software
+
+program_details ()
+{
+  case $1 in
+    aclocal|automake)
+      echo "The '$1' program is part of the GNU Automake package:"
+      echo "<$gnu_software_URL/automake>"
+      echo "It also requires GNU Autoconf, GNU m4 and Perl in order to run:"
+      echo "<$gnu_software_URL/autoconf>"
+      echo "<$gnu_software_URL/m4/>"
+      echo "<$perl_URL>"
+      ;;
+    autoconf|autom4te|autoheader)
+      echo "The '$1' program is part of the GNU Autoconf package:"
+      echo "<$gnu_software_URL/autoconf/>"
+      echo "It also requires GNU m4 and Perl in order to run:"
+      echo "<$gnu_software_URL/m4/>"
+      echo "<$perl_URL>"
+      ;;
+  esac
+}
+
+give_advice ()
+{
+  # Normalize program name to check for.
+  normalized_program=`echo "$1" | sed '
     s/^gnu-//; t
     s/^gnu//; t
     s/^g//; t'`
 
-# Now exit if we have it, but it failed.  Also exit now if we
+  printf '%s\n' "'$1' is $msg."
-# don't have it and --version was passed (most likely to detect
-# the program).  This is about non-GNU programs, so use $1 not
-# $program.
-case $1 in
-  lex*|yacc*)
-    # Not GNU programs, they don't have --version.
-    ;;
-
-  *)
-    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
-       # We have it, but it failed.
-       exit 1
-    elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
-       # Could not run --version or --help.  This is probably someone
-       # running `$TOOL --version' or `$TOOL --help' to check whether
-       # $TOOL exists and not knowing $TOOL uses missing.
-       exit 1
-    fi
-    ;;
-esac
-
-# If it does not exist, or fails to run (possibly an outdated version),
-# try to emulate it.
-case $program in
-  aclocal*)
-    echo 1>&2 "\
-WARNING: \`$1' is $msg.  You should only need it if
-         you modified \`acinclude.m4' or \`${configure_ac}'.  You might want
-         to install the \`Automake' and \`Perl' packages.  Grab them from
-         any GNU archive site."
-    touch aclocal.m4
-    ;;
 
+  configure_deps="'configure.ac' or m4 files included by 'configure.ac'"
+  case $normalized_program in
     autoconf*)
-    echo 1>&2 "\
+      echo "You should only need it if you modified 'configure.ac',"
-WARNING: \`$1' is $msg.  You should only need it if
+      echo "or m4 files included by it."
-         you modified \`${configure_ac}'.  You might want to install the
+      program_details 'autoconf'
-         \`Autoconf' and \`GNU m4' packages.  Grab them from any GNU
-         archive site."
-    touch configure
       ;;
-
     autoheader*)
-    echo 1>&2 "\
+      echo "You should only need it if you modified 'acconfig.h' or"
-WARNING: \`$1' is $msg.  You should only need it if
+      echo "$configure_deps."
-         you modified \`acconfig.h' or \`${configure_ac}'.  You might want
+      program_details 'autoheader'
-         to install the \`Autoconf' and \`GNU m4' packages.  Grab them
-         from any GNU archive site."
-    files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}`
-    test -z "$files" && files="config.h"
-    touch_files=
-    for f in $files; do
-      case $f in
-      *:*) touch_files="$touch_files "`echo "$f" |
-				       sed -e 's/^[^:]*://' -e 's/:.*//'`;;
-      *) touch_files="$touch_files $f.in";;
-      esac
-    done
-    touch $touch_files
       ;;
-
     automake*)
-    echo 1>&2 "\
+      echo "You should only need it if you modified 'Makefile.am' or"
-WARNING: \`$1' is $msg.  You should only need it if
+      echo "$configure_deps."
-         you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'.
+      program_details 'automake'
-         You might want to install the \`Automake' and \`Perl' packages.
+      ;;
-         Grab them from any GNU archive site."
+    aclocal*)
-    find . -type f -name Makefile.am -print |
+      echo "You should only need it if you modified 'acinclude.m4' or"
-	   sed 's/\.am$/.in/' |
+      echo "$configure_deps."
-	   while read f; do touch "$f"; done
+      program_details 'aclocal'
       ;;
-
    autom4te*)
-    echo 1>&2 "\
+      echo "You might have modified some maintainer files that require"
-WARNING: \`$1' is needed, but is $msg.
+      echo "the 'autom4te' program to be rebuilt."
-         You might have modified some files without having the
+      program_details 'autom4te'
-         proper tools for further handling them.
-         You can get \`$1' as part of \`Autoconf' from any GNU
-         archive site."
-
-    file=`echo "$*" | sed -n "$sed_output"`
-    test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
-    if test -f "$file"; then
-	touch $file
-    else
-	test -z "$file" || exec >$file
-	echo "#! /bin/sh"
-	echo "# Created by GNU Automake missing as a replacement of"
-	echo "#  $ $@"
-	echo "exit 0"
-	chmod +x $file
-	exit 1
-    fi
       ;;
-
     bison*|yacc*)
-    echo 1>&2 "\
+      echo "You should only need it if you modified a '.y' file."
-WARNING: \`$1' $msg.  You should only need it if
+      echo "You may want to install the GNU Bison package:"
-         you modified a \`.y' file.  You may need the \`Bison' package
+      echo "<$gnu_software_URL/bison/>"
-         in order for those modifications to take effect.  You can get
-         \`Bison' from any GNU archive site."
-    rm -f y.tab.c y.tab.h
-    if test $# -ne 1; then
-        eval LASTARG=\${$#}
-	case $LASTARG in
-	*.y)
-	    SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
-	    if test -f "$SRCFILE"; then
-	         cp "$SRCFILE" y.tab.c
-	    fi
-	    SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
-	    if test -f "$SRCFILE"; then
-	         cp "$SRCFILE" y.tab.h
-	    fi
       ;;
-	esac
-    fi
-    if test ! -f y.tab.h; then
-	echo >y.tab.h
-    fi
-    if test ! -f y.tab.c; then
-	echo 'main() { return 0; }' >y.tab.c
-    fi
-    ;;
-
     lex*|flex*)
-    echo 1>&2 "\
+      echo "You should only need it if you modified a '.l' file."
-WARNING: \`$1' is $msg.  You should only need it if
+      echo "You may want to install the Fast Lexical Analyzer package:"
-         you modified a \`.l' file.  You may need the \`Flex' package
+      echo "<$flex_URL>"
-         in order for those modifications to take effect.  You can get
+      ;;
-         \`Flex' from any GNU archive site."
+    help2man*)
-    rm -f lex.yy.c
+      echo "You should only need it if you modified a dependency" \
-    if test $# -ne 1; then
+           "of a man page."
-        eval LASTARG=\${$#}
+      echo "You may want to install the GNU Help2man package:"
-	case $LASTARG in
+      echo "<$gnu_software_URL/help2man/>"
-	*.l)
+    ;;
-	    SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
+    makeinfo*)
-	    if test -f "$SRCFILE"; then
+      echo "You should only need it if you modified a '.texi' file, or"
-	         cp "$SRCFILE" lex.yy.c
+      echo "any other file indirectly affecting the aspect of the manual."
-	    fi
+      echo "You might want to install the Texinfo package:"
+      echo "<$gnu_software_URL/texinfo/>"
+      echo "The spurious makeinfo call might also be the consequence of"
+      echo "using a buggy 'make' (AIX, DU, IRIX), in which case you might"
+      echo "want to install GNU make:"
+      echo "<$gnu_software_URL/make/>"
+      ;;
+    *)
+      echo "You might have modified some files without having the proper"
+      echo "tools for further handling them.  Check the 'README' file, it"
+      echo "often tells you about the needed prerequisites for installing"
+      echo "this package.  You may also peek at any GNU archive site, in"
+      echo "case some other package contains this missing '$1' program."
       ;;
   esac
-    fi
+}
-    if test ! -f lex.yy.c; then
-	echo 'main() { return 0; }' >lex.yy.c
-    fi
-    ;;
 
-  help2man*)
+give_advice "$1" | sed -e '1s/^/WARNING: /' \
-    echo 1>&2 "\
+                       -e '2,$s/^/         /' >&2
-WARNING: \`$1' is $msg.  You should only need it if
-	 you modified a dependency of a manual page.  You may need the
-	 \`Help2man' package in order for those modifications to take
-	 effect.  You can get \`Help2man' from any GNU archive site."
 
-    file=`echo "$*" | sed -n "$sed_output"`
+# Propagate the correct exit status (expected to be 127 for a program
-    test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
+# not found, 63 for a program that failed due to version mismatch).
-    if test -f "$file"; then
+exit $st
-	touch $file
-    else
-	test -z "$file" || exec >$file
-	echo ".ab help2man is required to generate this page"
-	exit $?
-    fi
-    ;;
-
-  makeinfo*)
-    echo 1>&2 "\
-WARNING: \`$1' is $msg.  You should only need it if
-         you modified a \`.texi' or \`.texinfo' file, or any other file
-         indirectly affecting the aspect of the manual.  The spurious
-         call might also be the consequence of using a buggy \`make' (AIX,
-         DU, IRIX).  You might want to install the \`Texinfo' package or
-         the \`GNU make' package.  Grab either from any GNU archive site."
-    # The file to touch is that specified with -o ...
-    file=`echo "$*" | sed -n "$sed_output"`
-    test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
-    if test -z "$file"; then
-      # ... or it is the one specified with @setfilename ...
-      infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
-      file=`sed -n '
-	/^@setfilename/{
-	  s/.* \([^ ]*\) *$/\1/
-	  p
-	  q
-	}' $infile`
-      # ... or it is derived from the source name (dir/f.texi becomes f.info)
-      test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info
-    fi
-    # If the file does not exist, the user really needs makeinfo;
-    # let's fail without touching anything.
-    test -f $file || exit 1
-    touch $file
-    ;;
-
-  *)
-    echo 1>&2 "\
-WARNING: \`$1' is needed, and is $msg.
-         You might have modified some files without having the
-         proper tools for further handling them.  Check the \`README' file,
-         it often tells you about the needed prerequisites for installing
-         this package.  You may also peek at any GNU archive site, in case
-         some other package would contain this missing \`$1' program."
-    exit 1
-    ;;
-esac
-
-exit 0
 
 # Local variables:
 # eval: (add-hook 'write-file-hooks 'time-stamp)

apps/lighttpd-1.4.32/src/Makefile.in

@@ -1,9 +1,8 @@
-# Makefile.in generated by automake 1.11.6 from Makefile.am.
+# Makefile.in generated by automake 1.14.1 from Makefile.am.
 # @configure_input@
 
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# Copyright (C) 1994-2013 Free Software Foundation, Inc.
-# 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software
+
-# Foundation, Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -18,23 +17,51 @@
 
 
 VPATH = @srcdir@
-am__make_dryrun = \
+am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
-  { \
+am__make_running_with_option = \
-    am__dry=no; \
+  case $${target_option-} in \
+      ?) ;; \
+      *) echo "am__make_running_with_option: internal error: invalid" \
+              "target option '$${target_option-}' specified" >&2; \
+         exit 1;; \
+  esac; \
+  has_opt=no; \
+  sane_makeflags=$$MAKEFLAGS; \
+  if $(am__is_gnu_make); then \
+    sane_makeflags=$$MFLAGS; \
+  else \
     case $$MAKEFLAGS in \
       *\\[\ \	]*) \
-        echo 'am--echo: ; @echo "AM"  OK' | $(MAKE) -f - 2>/dev/null \
+        bs=\\; \
-          | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
+        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
-      *) \
+          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
-        for am__flg in $$MAKEFLAGS; do \
-          case $$am__flg in \
-            *=*|--*) ;; \
-            *n*) am__dry=yes; break;; \
     esac; \
-        done;; \
+  fi; \
+  skip_next=no; \
+  strip_trailopt () \
+  { \
+    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+  }; \
+  for flg in $$sane_makeflags; do \
+    test $$skip_next = yes && { skip_next=no; continue; }; \
+    case $$flg in \
+      *=*|--*) continue;; \
+        -*I) strip_trailopt 'I'; skip_next=yes;; \
+      -*I?*) strip_trailopt 'I';; \
+        -*O) strip_trailopt 'O'; skip_next=yes;; \
+      -*O?*) strip_trailopt 'O';; \
+        -*l) strip_trailopt 'l'; skip_next=yes;; \
+      -*l?*) strip_trailopt 'l';; \
+      -[dEDm]) skip_next=yes;; \
+      -[JT]) skip_next=yes;; \
     esac; \
-    test $$am__dry = yes; \
+    case $$flg in \
-  }
+      *$$target_option*) has_opt=yes; break;; \
+    esac; \
+  done; \
+  test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
 pkgdatadir = $(datadir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
 pkglibdir = $(libdir)/@PACKAGE@
@@ -63,8 +90,8 @@ sbin_PROGRAMS = lighttpd$(EXEEXT) lighttpd-angel$(EXEEXT)
 @NO_RDYNAMIC_TRUE@am__append_1 = liblightcomp.la
 @NO_RDYNAMIC_FALSE@am__append_2 = $(common_src)
 subdir = src
-DIST_COMMON = $(noinst_HEADERS) $(srcdir)/Makefile.am \
+DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \
-	$(srcdir)/Makefile.in
+	$(top_srcdir)/depcomp $(noinst_HEADERS)
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
 am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \
 	$(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
@@ -157,6 +184,7 @@ liblightcomp_la_OBJECTS = $(am_liblightcomp_la_OBJECTS)
 AM_V_lt = $(am__v_lt_@AM_V@)
 am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@)
 am__v_lt_0 = --silent
+am__v_lt_1 = 
 liblightcomp_la_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC \
 	$(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=link $(CCLD) \
 	$(liblightcomp_la_CFLAGS) $(CFLAGS) $(liblightcomp_la_LDFLAGS) \
@@ -450,6 +478,18 @@ am_proc_open_OBJECTS = proc_open-proc_open.$(OBJEXT) \
 	proc_open-buffer.$(OBJEXT)
 proc_open_OBJECTS = $(am_proc_open_OBJECTS)
 proc_open_LDADD = $(LDADD)
+AM_V_P = $(am__v_P_@AM_V@)
+am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
+am__v_P_0 = false
+am__v_P_1 = :
+AM_V_GEN = $(am__v_GEN_@AM_V@)
+am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
+am__v_GEN_0 = @echo "  GEN     " $@;
+am__v_GEN_1 = 
+AM_V_at = $(am__v_at_@AM_V@)
+am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
+am__v_at_0 = @
+am__v_at_1 = 
 DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)
 depcomp = $(SHELL) $(top_srcdir)/depcomp
 am__depfiles_maybe = depfiles
@@ -463,9 +503,7 @@ LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
 AM_V_CC = $(am__v_CC_@AM_V@)
 am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@)
 am__v_CC_0 = @echo "  CC      " $@;
-AM_V_at = $(am__v_at_@AM_V@)
+am__v_CC_1 = 
-am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
-am__v_at_0 = @
 CCLD = $(CC)
 LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
 	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
@@ -473,9 +511,7 @@ LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
 AM_V_CCLD = $(am__v_CCLD_@AM_V@)
 am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@)
 am__v_CCLD_0 = @echo "  CCLD    " $@;
-AM_V_GEN = $(am__v_GEN_@AM_V@)
+am__v_CCLD_1 = 
-am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
-am__v_GEN_0 = @echo "  GEN   " $@;
 SOURCES = $(liblightcomp_la_SOURCES) $(mod_access_la_SOURCES) \
 	$(mod_accesslog_la_SOURCES) $(mod_alias_la_SOURCES) \
 	$(mod_auth_la_SOURCES) $(mod_cgi_la_SOURCES) \
@@ -519,6 +555,23 @@ am__can_run_installinfo = \
     *) (install-info --version) >/dev/null 2>&1;; \
   esac
 HEADERS = $(noinst_HEADERS)
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
+# Read a list of newline-separated strings from the standard input,
+# and print each of them once, without duplicates.  Input order is
+# *not* preserved.
+am__uniquify_input = $(AWK) '\
+  BEGIN { nonempty = 0; } \
+  { items[$$0] = 1; nonempty = 1; } \
+  END { if (nonempty) { for (i in items) print i; }; } \
+'
+# Make sure the list of sources is unique.  This is necessary because,
+# e.g., the same source file might be shared among _SOURCES variables
+# for different programs/libraries.
+am__define_uniq_tagged_files = \
+  list='$(am__tagged_files)'; \
+  unique=`for i in $$list; do \
+    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+  done | $(am__uniquify_input)`
 ETAGS = etags
 CTAGS = ctags
 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
@@ -896,6 +949,7 @@ $(top_srcdir)/configure:  $(am__configure_deps)
 $(ACLOCAL_M4):  $(am__aclocal_m4_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 $(am__aclocal_m4_deps):
+
 install-libLTLIBRARIES: $(lib_LTLIBRARIES)
 	@$(NORMAL_INSTALL)
 	@list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \
@@ -922,76 +976,111 @@ uninstall-libLTLIBRARIES:
 
 clean-libLTLIBRARIES:
 	-test -z "$(lib_LTLIBRARIES)" || rm -f $(lib_LTLIBRARIES)
-	@list='$(lib_LTLIBRARIES)'; for p in $$list; do \
+	@list='$(lib_LTLIBRARIES)'; \
-	  dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \
+	locs=`for p in $$list; do echo $$p; done | \
-	  test "$$dir" != "$$p" || dir=.; \
+	      sed 's|^[^/]*$$|.|; s|/[^/]*$$||; s|$$|/so_locations|' | \
-	  echo "rm -f \"$${dir}/so_locations\""; \
+	      sort -u`; \
-	  rm -f "$${dir}/so_locations"; \
+	test -z "$$locs" || { \
-	done
+	  echo rm -f $${locs}; \
+	  rm -f $${locs}; \
+	}
+
 liblightcomp.la: $(liblightcomp_la_OBJECTS) $(liblightcomp_la_DEPENDENCIES) $(EXTRA_liblightcomp_la_DEPENDENCIES) 
 	$(AM_V_CCLD)$(liblightcomp_la_LINK) $(am_liblightcomp_la_rpath) $(liblightcomp_la_OBJECTS) $(liblightcomp_la_LIBADD) $(LIBS)
+
 mod_access.la: $(mod_access_la_OBJECTS) $(mod_access_la_DEPENDENCIES) $(EXTRA_mod_access_la_DEPENDENCIES) 
 	$(AM_V_CCLD)$(mod_access_la_LINK) -rpath $(libdir) $(mod_access_la_OBJECTS) $(mod_access_la_LIBADD) $(LIBS)
+
 mod_accesslog.la: $(mod_accesslog_la_OBJECTS) $(mod_accesslog_la_DEPENDENCIES) $(EXTRA_mod_accesslog_la_DEPENDENCIES) 
 	$(AM_V_CCLD)$(mod_accesslog_la_LINK) -rpath $(libdir) $(mod_accesslog_la_OBJECTS) $(mod_accesslog_la_LIBADD) $(LIBS)
+
 mod_alias.la: $(mod_alias_la_OBJECTS) $(mod_alias_la_DEPENDENCIES) $(EXTRA_mod_alias_la_DEPENDENCIES) 
 	$(AM_V_CCLD)$(mod_alias_la_LINK) -rpath $(libdir) $(mod_alias_la_OBJECTS) $(mod_alias_la_LIBADD) $(LIBS)
+
 mod_auth.la: $(mod_auth_la_OBJECTS) $(mod_auth_la_DEPENDENCIES) $(EXTRA_mod_auth_la_DEPENDENCIES) 
 	$(AM_V_CCLD)$(mod_auth_la_LINK) -rpath $(libdir) $(mod_auth_la_OBJECTS) $(mod_auth_la_LIBADD) $(LIBS)
+
 mod_cgi.la: $(mod_cgi_la_OBJECTS) $(mod_cgi_la_DEPENDENCIES) $(EXTRA_mod_cgi_la_DEPENDENCIES) 
 	$(AM_V_CCLD)$(mod_cgi_la_LINK) -rpath $(libdir) $(mod_cgi_la_OBJECTS) $(mod_cgi_la_LIBADD) $(LIBS)
+
 mod_cml.la: $(mod_cml_la_OBJECTS) $(mod_cml_la_DEPENDENCIES) $(EXTRA_mod_cml_la_DEPENDENCIES) 
 	$(AM_V_CCLD)$(mod_cml_la_LINK) -rpath $(libdir) $(mod_cml_la_OBJECTS) $(mod_cml_la_LIBADD) $(LIBS)
+
 mod_compress.la: $(mod_compress_la_OBJECTS) $(mod_compress_la_DEPENDENCIES) $(EXTRA_mod_compress_la_DEPENDENCIES) 
 	$(AM_V_CCLD)$(mod_compress_la_LINK) -rpath $(libdir) $(mod_compress_la_OBJECTS) $(mod_compress_la_LIBADD) $(LIBS)
+
 mod_dirlisting.la: $(mod_dirlisting_la_OBJECTS) $(mod_dirlisting_la_DEPENDENCIES) $(EXTRA_mod_dirlisting_la_DEPENDENCIES) 
 	$(AM_V_CCLD)$(mod_dirlisting_la_LINK) -rpath $(libdir) $(mod_dirlisting_la_OBJECTS) $(mod_dirlisting_la_LIBADD) $(LIBS)
+
 mod_evasive.la: $(mod_evasive_la_OBJECTS) $(mod_evasive_la_DEPENDENCIES) $(EXTRA_mod_evasive_la_DEPENDENCIES) 
 	$(AM_V_CCLD)$(mod_evasive_la_LINK) -rpath $(libdir) $(mod_evasive_la_OBJECTS) $(mod_evasive_la_LIBADD) $(LIBS)
+
 mod_evhost.la: $(mod_evhost_la_OBJECTS) $(mod_evhost_la_DEPENDENCIES) $(EXTRA_mod_evhost_la_DEPENDENCIES) 
 	$(AM_V_CCLD)$(mod_evhost_la_LINK) -rpath $(libdir) $(mod_evhost_la_OBJECTS) $(mod_evhost_la_LIBADD) $(LIBS)
+
 mod_expire.la: $(mod_expire_la_OBJECTS) $(mod_expire_la_DEPENDENCIES) $(EXTRA_mod_expire_la_DEPENDENCIES) 
 	$(AM_V_CCLD)$(mod_expire_la_LINK) -rpath $(libdir) $(mod_expire_la_OBJECTS) $(mod_expire_la_LIBADD) $(LIBS)
+
 mod_extforward.la: $(mod_extforward_la_OBJECTS) $(mod_extforward_la_DEPENDENCIES) $(EXTRA_mod_extforward_la_DEPENDENCIES) 
 	$(AM_V_CCLD)$(mod_extforward_la_LINK) -rpath $(libdir) $(mod_extforward_la_OBJECTS) $(mod_extforward_la_LIBADD) $(LIBS)
+
 mod_fastcgi.la: $(mod_fastcgi_la_OBJECTS) $(mod_fastcgi_la_DEPENDENCIES) $(EXTRA_mod_fastcgi_la_DEPENDENCIES) 
 	$(AM_V_CCLD)$(mod_fastcgi_la_LINK) -rpath $(libdir) $(mod_fastcgi_la_OBJECTS) $(mod_fastcgi_la_LIBADD) $(LIBS)
+
 mod_flv_streaming.la: $(mod_flv_streaming_la_OBJECTS) $(mod_flv_streaming_la_DEPENDENCIES) $(EXTRA_mod_flv_streaming_la_DEPENDENCIES) 
 	$(AM_V_CCLD)$(mod_flv_streaming_la_LINK) -rpath $(libdir) $(mod_flv_streaming_la_OBJECTS) $(mod_flv_streaming_la_LIBADD) $(LIBS)
+
 mod_indexfile.la: $(mod_indexfile_la_OBJECTS) $(mod_indexfile_la_DEPENDENCIES) $(EXTRA_mod_indexfile_la_DEPENDENCIES) 
 	$(AM_V_CCLD)$(mod_indexfile_la_LINK) -rpath $(libdir) $(mod_indexfile_la_OBJECTS) $(mod_indexfile_la_LIBADD) $(LIBS)
+
 mod_magnet.la: $(mod_magnet_la_OBJECTS) $(mod_magnet_la_DEPENDENCIES) $(EXTRA_mod_magnet_la_DEPENDENCIES) 
 	$(AM_V_CCLD)$(mod_magnet_la_LINK) -rpath $(libdir) $(mod_magnet_la_OBJECTS) $(mod_magnet_la_LIBADD) $(LIBS)
+
 mod_mysql_vhost.la: $(mod_mysql_vhost_la_OBJECTS) $(mod_mysql_vhost_la_DEPENDENCIES) $(EXTRA_mod_mysql_vhost_la_DEPENDENCIES) 
 	$(AM_V_CCLD)$(mod_mysql_vhost_la_LINK) -rpath $(libdir) $(mod_mysql_vhost_la_OBJECTS) $(mod_mysql_vhost_la_LIBADD) $(LIBS)
+
 mod_proxy.la: $(mod_proxy_la_OBJECTS) $(mod_proxy_la_DEPENDENCIES) $(EXTRA_mod_proxy_la_DEPENDENCIES) 
 	$(AM_V_CCLD)$(mod_proxy_la_LINK) -rpath $(libdir) $(mod_proxy_la_OBJECTS) $(mod_proxy_la_LIBADD) $(LIBS)
+
 mod_redirect.la: $(mod_redirect_la_OBJECTS) $(mod_redirect_la_DEPENDENCIES) $(EXTRA_mod_redirect_la_DEPENDENCIES) 
 	$(AM_V_CCLD)$(mod_redirect_la_LINK) -rpath $(libdir) $(mod_redirect_la_OBJECTS) $(mod_redirect_la_LIBADD) $(LIBS)
+
 mod_rewrite.la: $(mod_rewrite_la_OBJECTS) $(mod_rewrite_la_DEPENDENCIES) $(EXTRA_mod_rewrite_la_DEPENDENCIES) 
 	$(AM_V_CCLD)$(mod_rewrite_la_LINK) -rpath $(libdir) $(mod_rewrite_la_OBJECTS) $(mod_rewrite_la_LIBADD) $(LIBS)
+
 mod_rrdtool.la: $(mod_rrdtool_la_OBJECTS) $(mod_rrdtool_la_DEPENDENCIES) $(EXTRA_mod_rrdtool_la_DEPENDENCIES) 
 	$(AM_V_CCLD)$(mod_rrdtool_la_LINK) -rpath $(libdir) $(mod_rrdtool_la_OBJECTS) $(mod_rrdtool_la_LIBADD) $(LIBS)
+
 mod_scgi.la: $(mod_scgi_la_OBJECTS) $(mod_scgi_la_DEPENDENCIES) $(EXTRA_mod_scgi_la_DEPENDENCIES) 
 	$(AM_V_CCLD)$(mod_scgi_la_LINK) -rpath $(libdir) $(mod_scgi_la_OBJECTS) $(mod_scgi_la_LIBADD) $(LIBS)
+
 mod_secdownload.la: $(mod_secdownload_la_OBJECTS) $(mod_secdownload_la_DEPENDENCIES) $(EXTRA_mod_secdownload_la_DEPENDENCIES) 
 	$(AM_V_CCLD)$(mod_secdownload_la_LINK) -rpath $(libdir) $(mod_secdownload_la_OBJECTS) $(mod_secdownload_la_LIBADD) $(LIBS)
+
 mod_setenv.la: $(mod_setenv_la_OBJECTS) $(mod_setenv_la_DEPENDENCIES) $(EXTRA_mod_setenv_la_DEPENDENCIES) 
 	$(AM_V_CCLD)$(mod_setenv_la_LINK) -rpath $(libdir) $(mod_setenv_la_OBJECTS) $(mod_setenv_la_LIBADD) $(LIBS)
+
 mod_simple_vhost.la: $(mod_simple_vhost_la_OBJECTS) $(mod_simple_vhost_la_DEPENDENCIES) $(EXTRA_mod_simple_vhost_la_DEPENDENCIES) 
 	$(AM_V_CCLD)$(mod_simple_vhost_la_LINK) -rpath $(libdir) $(mod_simple_vhost_la_OBJECTS) $(mod_simple_vhost_la_LIBADD) $(LIBS)
+
 mod_ssi.la: $(mod_ssi_la_OBJECTS) $(mod_ssi_la_DEPENDENCIES) $(EXTRA_mod_ssi_la_DEPENDENCIES) 
 	$(AM_V_CCLD)$(mod_ssi_la_LINK) -rpath $(libdir) $(mod_ssi_la_OBJECTS) $(mod_ssi_la_LIBADD) $(LIBS)
+
 mod_staticfile.la: $(mod_staticfile_la_OBJECTS) $(mod_staticfile_la_DEPENDENCIES) $(EXTRA_mod_staticfile_la_DEPENDENCIES) 
 	$(AM_V_CCLD)$(mod_staticfile_la_LINK) -rpath $(libdir) $(mod_staticfile_la_OBJECTS) $(mod_staticfile_la_LIBADD) $(LIBS)
+
 mod_status.la: $(mod_status_la_OBJECTS) $(mod_status_la_DEPENDENCIES) $(EXTRA_mod_status_la_DEPENDENCIES) 
 	$(AM_V_CCLD)$(mod_status_la_LINK) -rpath $(libdir) $(mod_status_la_OBJECTS) $(mod_status_la_LIBADD) $(LIBS)
+
 mod_trigger_b4_dl.la: $(mod_trigger_b4_dl_la_OBJECTS) $(mod_trigger_b4_dl_la_DEPENDENCIES) $(EXTRA_mod_trigger_b4_dl_la_DEPENDENCIES) 
 	$(AM_V_CCLD)$(mod_trigger_b4_dl_la_LINK) -rpath $(libdir) $(mod_trigger_b4_dl_la_OBJECTS) $(mod_trigger_b4_dl_la_LIBADD) $(LIBS)
+
 mod_userdir.la: $(mod_userdir_la_OBJECTS) $(mod_userdir_la_DEPENDENCIES) $(EXTRA_mod_userdir_la_DEPENDENCIES) 
 	$(AM_V_CCLD)$(mod_userdir_la_LINK) -rpath $(libdir) $(mod_userdir_la_OBJECTS) $(mod_userdir_la_LIBADD) $(LIBS)
+
 mod_usertrack.la: $(mod_usertrack_la_OBJECTS) $(mod_usertrack_la_DEPENDENCIES) $(EXTRA_mod_usertrack_la_DEPENDENCIES) 
 	$(AM_V_CCLD)$(mod_usertrack_la_LINK) -rpath $(libdir) $(mod_usertrack_la_OBJECTS) $(mod_usertrack_la_LIBADD) $(LIBS)
+
 mod_webdav.la: $(mod_webdav_la_OBJECTS) $(mod_webdav_la_DEPENDENCIES) $(EXTRA_mod_webdav_la_DEPENDENCIES) 
 	$(AM_V_CCLD)$(mod_webdav_la_LINK) -rpath $(libdir) $(mod_webdav_la_OBJECTS) $(mod_webdav_la_LIBADD) $(LIBS)
 
@@ -1012,10 +1101,12 @@ install-sbinPROGRAMS: $(sbin_PROGRAMS)
 	fi; \
 	for p in $$list; do echo "$$p $$p"; done | \
 	sed 's/$(EXEEXT)$$//' | \
-	while read p p1; do if test -f $$p || test -f $$p1; \
+	while read p p1; do if test -f $$p \
-	  then echo "$$p"; echo "$$p"; else :; fi; \
+	 || test -f $$p1 \
+	  ; then echo "$$p"; echo "$$p"; else :; fi; \
 	done | \
-	sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \
+	sed -e 'p;s,.*/,,;n;h' \
+	    -e 's|.*|.|' \
 	    -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
 	sed 'N;N;N;s,\n, ,g' | \
 	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
@@ -1036,7 +1127,8 @@ uninstall-sbinPROGRAMS:
 	@list='$(sbin_PROGRAMS)'; test -n "$(sbindir)" || list=; \
 	files=`for p in $$list; do echo "$$p"; done | \
 	  sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
-	      -e 's/$$/$(EXEEXT)/' `; \
+	      -e 's/$$/$(EXEEXT)/' \
+	`; \
 	test -n "$$list" || exit 0; \
 	echo " ( cd '$(DESTDIR)$(sbindir)' && rm -f" $$files ")"; \
 	cd "$(DESTDIR)$(sbindir)" && rm -f $$files
@@ -1049,15 +1141,19 @@ clean-sbinPROGRAMS:
 	list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
 	echo " rm -f" $$list; \
 	rm -f $$list
+
 lemon$(EXEEXT): $(lemon_OBJECTS) $(lemon_DEPENDENCIES) $(EXTRA_lemon_DEPENDENCIES) 
 	@rm -f lemon$(EXEEXT)
 	$(AM_V_CCLD)$(LINK) $(lemon_OBJECTS) $(lemon_LDADD) $(LIBS)
+
 lighttpd$(EXEEXT): $(lighttpd_OBJECTS) $(lighttpd_DEPENDENCIES) $(EXTRA_lighttpd_DEPENDENCIES) 
 	@rm -f lighttpd$(EXEEXT)
 	$(AM_V_CCLD)$(lighttpd_LINK) $(lighttpd_OBJECTS) $(lighttpd_LDADD) $(LIBS)
+
 lighttpd-angel$(EXEEXT): $(lighttpd_angel_OBJECTS) $(lighttpd_angel_DEPENDENCIES) $(EXTRA_lighttpd_angel_DEPENDENCIES) 
 	@rm -f lighttpd-angel$(EXEEXT)
 	$(AM_V_CCLD)$(LINK) $(lighttpd_angel_OBJECTS) $(lighttpd_angel_LDADD) $(LIBS)
+
 proc_open$(EXEEXT): $(proc_open_OBJECTS) $(proc_open_DEPENDENCIES) $(EXTRA_proc_open_DEPENDENCIES) 
 	@rm -f proc_open$(EXEEXT)
 	$(AM_V_CCLD)$(LINK) $(proc_open_OBJECTS) $(proc_open_LDADD) $(LIBS)
@@ -1208,14 +1304,14 @@ distclean-compile:
 @am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c $<
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $<
 
 .c.obj:
 @am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
 @am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c `$(CYGPATH_W) '$<'`
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
 
 .c.lo:
 @am__fastdepCC_TRUE@	$(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
@@ -1601,26 +1697,15 @@ mostlyclean-libtool:
 clean-libtool:
 	-rm -rf .libs _libs
 
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+ID: $(am__tagged_files)
-	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+	$(am__define_uniq_tagged_files); mkid -fID $$unique
-	unique=`for i in $$list; do \
+tags: tags-am
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+TAGS: tags
-	  done | \
-	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
-	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	mkid -fID $$unique
-tags: TAGS
 
-TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
+tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
-		$(TAGS_FILES) $(LISP)
 	set x; \
 	here=`pwd`; \
-	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
+	$(am__define_uniq_tagged_files); \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
-	      END { if (nonempty) { for (i in files) print i; }; }'`; \
 	shift; \
 	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 	  test -n "$$unique" || unique=$$empty_fix; \
@@ -1632,15 +1717,11 @@ TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 	      $$unique; \
 	  fi; \
 	fi
-ctags: CTAGS
+ctags: ctags-am
-CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
+
-		$(TAGS_FILES) $(LISP)
+CTAGS: ctags
-	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
+ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
-	unique=`for i in $$list; do \
+	$(am__define_uniq_tagged_files); \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
-	      END { if (nonempty) { for (i in files) print i; }; }'`; \
 	test -z "$(CTAGS_ARGS)$$unique" \
 	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
 	     $$unique
@@ -1649,6 +1730,21 @@ GTAGS:
 	here=`$(am__cd) $(top_builddir) && pwd` \
 	  && $(am__cd) $(top_srcdir) \
 	  && gtags -i $(GTAGS_ARGS) "$$here"
+cscopelist: cscopelist-am
+
+cscopelist-am: $(am__tagged_files)
+	list='$(am__tagged_files)'; \
+	case "$(srcdir)" in \
+	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
+	  *) sdir=$(subdir)/$(srcdir) ;; \
+	esac; \
+	for i in $$list; do \
+	  if test -f "$$i"; then \
+	    echo "$(subdir)/$$i"; \
+	  else \
+	    echo "$$sdir/$$i"; \
+	  fi; \
+	done >> $(top_builddir)/cscope.files
 
 distclean-tags:
 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
@@ -1798,20 +1894,20 @@ uninstall-am: uninstall-libLTLIBRARIES uninstall-sbinPROGRAMS
 
 .MAKE: all check install install-am install-strip
 
-.PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \
+.PHONY: CTAGS GTAGS TAGS all all-am check check-am clean clean-generic \
 	clean-libLTLIBRARIES clean-libtool clean-noinstPROGRAMS \
-	clean-sbinPROGRAMS ctags distclean distclean-compile \
+	clean-sbinPROGRAMS cscopelist-am ctags ctags-am distclean \
-	distclean-generic distclean-libtool distclean-tags distdir dvi \
+	distclean-compile distclean-generic distclean-libtool \
-	dvi-am html html-am info info-am install install-am \
+	distclean-tags distdir dvi dvi-am html html-am info info-am \
-	install-data install-data-am install-dvi install-dvi-am \
+	install install-am install-data install-data-am install-dvi \
-	install-exec install-exec-am install-html install-html-am \
+	install-dvi-am install-exec install-exec-am install-html \
-	install-info install-info-am install-libLTLIBRARIES \
+	install-html-am install-info install-info-am \
-	install-man install-pdf install-pdf-am install-ps \
+	install-libLTLIBRARIES install-man install-pdf install-pdf-am \
-	install-ps-am install-sbinPROGRAMS install-strip installcheck \
+	install-ps install-ps-am install-sbinPROGRAMS install-strip \
-	installcheck-am installdirs maintainer-clean \
+	installcheck installcheck-am installdirs maintainer-clean \
 	maintainer-clean-generic mostlyclean mostlyclean-compile \
 	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
-	tags uninstall uninstall-am uninstall-libLTLIBRARIES \
+	tags tags-am uninstall uninstall-am uninstall-libLTLIBRARIES \
 	uninstall-sbinPROGRAMS
 
 

apps/lighttpd-1.4.32/src/network_backends.h

@@ -44,7 +44,7 @@
 # define USE_AIX_SENDFILE
 #endif
 
-#if defined HAVE_LIBMTCP && (HAVE_LIBPSIO | HAVE_LIBDPDK)
+#if defined HAVE_LIBMTCP && (HAVE_LIBPSIO | HAVE_LIBDPDK | HAVE_NETMAP)
 # define USE_MTCP
 #include <sys/socket.h>
 #include <mtcp_api.h>

apps/lighttpd-1.4.32/tests/Makefile.in

@@ -1,9 +1,8 @@
-# Makefile.in generated by automake 1.11.6 from Makefile.am.
+# Makefile.in generated by automake 1.14.1 from Makefile.am.
 # @configure_input@
 
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# Copyright (C) 1994-2013 Free Software Foundation, Inc.
-# 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software
+
-# Foundation, Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -15,23 +14,51 @@
 
 @SET_MAKE@
 VPATH = @srcdir@
-am__make_dryrun = \
+am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
-  { \
+am__make_running_with_option = \
-    am__dry=no; \
+  case $${target_option-} in \
+      ?) ;; \
+      *) echo "am__make_running_with_option: internal error: invalid" \
+              "target option '$${target_option-}' specified" >&2; \
+         exit 1;; \
+  esac; \
+  has_opt=no; \
+  sane_makeflags=$$MAKEFLAGS; \
+  if $(am__is_gnu_make); then \
+    sane_makeflags=$$MFLAGS; \
+  else \
     case $$MAKEFLAGS in \
       *\\[\ \	]*) \
-        echo 'am--echo: ; @echo "AM"  OK' | $(MAKE) -f - 2>/dev/null \
+        bs=\\; \
-          | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
+        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
-      *) \
+          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
-        for am__flg in $$MAKEFLAGS; do \
-          case $$am__flg in \
-            *=*|--*) ;; \
-            *n*) am__dry=yes; break;; \
     esac; \
-        done;; \
+  fi; \
+  skip_next=no; \
+  strip_trailopt () \
+  { \
+    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+  }; \
+  for flg in $$sane_makeflags; do \
+    test $$skip_next = yes && { skip_next=no; continue; }; \
+    case $$flg in \
+      *=*|--*) continue;; \
+        -*I) strip_trailopt 'I'; skip_next=yes;; \
+      -*I?*) strip_trailopt 'I';; \
+        -*O) strip_trailopt 'O'; skip_next=yes;; \
+      -*O?*) strip_trailopt 'O';; \
+        -*l) strip_trailopt 'l'; skip_next=yes;; \
+      -*l?*) strip_trailopt 'l';; \
+      -[dEDm]) skip_next=yes;; \
+      -[JT]) skip_next=yes;; \
     esac; \
-    test $$am__dry = yes; \
+    case $$flg in \
-  }
+      *$$target_option*) has_opt=yes; break;; \
+    esac; \
+  done; \
+  test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
 pkgdatadir = $(datadir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
 pkglibdir = $(libdir)/@PACKAGE@
@@ -54,7 +81,8 @@ target_triplet = @target@
 @CHECK_WITH_FASTCGI_TRUE@check_PROGRAMS = fcgi-auth$(EXEEXT) \
 @CHECK_WITH_FASTCGI_TRUE@	fcgi-responder$(EXEEXT)
 subdir = tests
-DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
+DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \
+	$(top_srcdir)/depcomp $(top_srcdir)/test-driver
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
 am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \
 	$(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
@@ -73,11 +101,24 @@ fcgi_auth_DEPENDENCIES =
 AM_V_lt = $(am__v_lt_@AM_V@)
 am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@)
 am__v_lt_0 = --silent
+am__v_lt_1 = 
 am__fcgi_responder_SOURCES_DIST = fcgi-responder.c
 @CHECK_WITH_FASTCGI_TRUE@am_fcgi_responder_OBJECTS =  \
 @CHECK_WITH_FASTCGI_TRUE@	fcgi-responder.$(OBJEXT)
 fcgi_responder_OBJECTS = $(am_fcgi_responder_OBJECTS)
 fcgi_responder_DEPENDENCIES =
+AM_V_P = $(am__v_P_@AM_V@)
+am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
+am__v_P_0 = false
+am__v_P_1 = :
+AM_V_GEN = $(am__v_GEN_@AM_V@)
+am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
+am__v_GEN_0 = @echo "  GEN     " $@;
+am__v_GEN_1 = 
+AM_V_at = $(am__v_at_@AM_V@)
+am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
+am__v_at_0 = @
+am__v_at_1 = 
 DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)
 depcomp = $(SHELL) $(top_srcdir)/depcomp
 am__depfiles_maybe = depfiles
@@ -91,9 +132,7 @@ LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
 AM_V_CC = $(am__v_CC_@AM_V@)
 am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@)
 am__v_CC_0 = @echo "  CC      " $@;
-AM_V_at = $(am__v_at_@AM_V@)
+am__v_CC_1 = 
-am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
-am__v_at_0 = @
 CCLD = $(CC)
 LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
 	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
@@ -101,19 +140,18 @@ LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
 AM_V_CCLD = $(am__v_CCLD_@AM_V@)
 am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@)
 am__v_CCLD_0 = @echo "  CCLD    " $@;
-AM_V_GEN = $(am__v_GEN_@AM_V@)
+am__v_CCLD_1 = 
-am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
-am__v_GEN_0 = @echo "  GEN   " $@;
 SOURCES = $(fcgi_auth_SOURCES) $(fcgi_responder_SOURCES)
 DIST_SOURCES = $(am__fcgi_auth_SOURCES_DIST) \
 	$(am__fcgi_responder_SOURCES_DIST)
-RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
+RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
-	html-recursive info-recursive install-data-recursive \
+	ctags-recursive dvi-recursive html-recursive info-recursive \
-	install-dvi-recursive install-exec-recursive \
+	install-data-recursive install-dvi-recursive \
-	install-html-recursive install-info-recursive \
+	install-exec-recursive install-html-recursive \
-	install-pdf-recursive install-ps-recursive install-recursive \
+	install-info-recursive install-pdf-recursive \
-	installcheck-recursive installdirs-recursive pdf-recursive \
+	install-ps-recursive install-recursive installcheck-recursive \
-	ps-recursive uninstall-recursive
+	installdirs-recursive pdf-recursive ps-recursive \
+	tags-recursive uninstall-recursive
 am__can_run_installinfo = \
   case $$AM_UPDATE_INFO_DIR in \
     n|no|NO) false;; \
@@ -121,13 +159,234 @@ am__can_run_installinfo = \
   esac
 RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
   distclean-recursive maintainer-clean-recursive
-AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
+am__recursive_targets = \
-	$(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
+  $(RECURSIVE_TARGETS) \
-	distdir
+  $(RECURSIVE_CLEAN_TARGETS) \
+  $(am__extra_recursive_targets)
+AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
+	check recheck distdir
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
+# Read a list of newline-separated strings from the standard input,
+# and print each of them once, without duplicates.  Input order is
+# *not* preserved.
+am__uniquify_input = $(AWK) '\
+  BEGIN { nonempty = 0; } \
+  { items[$$0] = 1; nonempty = 1; } \
+  END { if (nonempty) { for (i in items) print i; }; } \
+'
+# Make sure the list of sources is unique.  This is necessary because,
+# e.g., the same source file might be shared among _SOURCES variables
+# for different programs/libraries.
+am__define_uniq_tagged_files = \
+  list='$(am__tagged_files)'; \
+  unique=`for i in $$list; do \
+    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+  done | $(am__uniquify_input)`
 ETAGS = etags
 CTAGS = ctags
-am__tty_colors = \
+am__tty_colors_dummy = \
-red=; grn=; lgn=; blu=; std=
+  mgn= red= grn= lgn= blu= brg= std=; \
+  am__color_tests=no
+am__tty_colors = { \
+  $(am__tty_colors_dummy); \
+  if test "X$(AM_COLOR_TESTS)" = Xno; then \
+    am__color_tests=no; \
+  elif test "X$(AM_COLOR_TESTS)" = Xalways; then \
+    am__color_tests=yes; \
+  elif test "X$$TERM" != Xdumb && { test -t 1; } 2>/dev/null; then \
+    am__color_tests=yes; \
+  fi; \
+  if test $$am__color_tests = yes; then \
+    red=''; \
+    grn=''; \
+    lgn=''; \
+    blu=''; \
+    mgn=''; \
+    brg=''; \
+    std=''; \
+  fi; \
+}
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+    *) f=$$p;; \
+  esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__uninstall_files_from_dir = { \
+  test -z "$$files" \
+    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
+    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
+         $(am__cd) "$$dir" && rm -f $$files; }; \
+  }
+am__recheck_rx = ^[ 	]*:recheck:[ 	]*
+am__global_test_result_rx = ^[ 	]*:global-test-result:[ 	]*
+am__copy_in_global_log_rx = ^[ 	]*:copy-in-global-log:[ 	]*
+# A command that, given a newline-separated list of test names on the
+# standard input, print the name of the tests that are to be re-run
+# upon "make recheck".
+am__list_recheck_tests = $(AWK) '{ \
+  recheck = 1; \
+  while ((rc = (getline line < ($$0 ".trs"))) != 0) \
+    { \
+      if (rc < 0) \
+        { \
+          if ((getline line2 < ($$0 ".log")) < 0) \
+	    recheck = 0; \
+          break; \
+        } \
+      else if (line ~ /$(am__recheck_rx)[nN][Oo]/) \
+        { \
+          recheck = 0; \
+          break; \
+        } \
+      else if (line ~ /$(am__recheck_rx)[yY][eE][sS]/) \
+        { \
+          break; \
+        } \
+    }; \
+  if (recheck) \
+    print $$0; \
+  close ($$0 ".trs"); \
+  close ($$0 ".log"); \
+}'
+# A command that, given a newline-separated list of test names on the
+# standard input, create the global log from their .trs and .log files.
+am__create_global_log = $(AWK) ' \
+function fatal(msg) \
+{ \
+  print "fatal: making $@: " msg | "cat >&2"; \
+  exit 1; \
+} \
+function rst_section(header) \
+{ \
+  print header; \
+  len = length(header); \
+  for (i = 1; i <= len; i = i + 1) \
+    printf "="; \
+  printf "\n\n"; \
+} \
+{ \
+  copy_in_global_log = 1; \
+  global_test_result = "RUN"; \
+  while ((rc = (getline line < ($$0 ".trs"))) != 0) \
+    { \
+      if (rc < 0) \
+         fatal("failed to read from " $$0 ".trs"); \
+      if (line ~ /$(am__global_test_result_rx)/) \
+        { \
+          sub("$(am__global_test_result_rx)", "", line); \
+          sub("[ 	]*$$", "", line); \
+          global_test_result = line; \
+        } \
+      else if (line ~ /$(am__copy_in_global_log_rx)[nN][oO]/) \
+        copy_in_global_log = 0; \
+    }; \
+  if (copy_in_global_log) \
+    { \
+      rst_section(global_test_result ": " $$0); \
+      while ((rc = (getline line < ($$0 ".log"))) != 0) \
+      { \
+        if (rc < 0) \
+          fatal("failed to read from " $$0 ".log"); \
+        print line; \
+      }; \
+      printf "\n"; \
+    }; \
+  close ($$0 ".trs"); \
+  close ($$0 ".log"); \
+}'
+# Restructured Text title.
+am__rst_title = { sed 's/.*/   &   /;h;s/./=/g;p;x;s/ *$$//;p;g' && echo; }
+# Solaris 10 'make', and several other traditional 'make' implementations,
+# pass "-e" to $(SHELL), and POSIX 2008 even requires this.  Work around it
+# by disabling -e (using the XSI extension "set +e") if it's set.
+am__sh_e_setup = case $$- in *e*) set +e;; esac
+# Default flags passed to test drivers.
+am__common_driver_flags = \
+  --color-tests "$$am__color_tests" \
+  --enable-hard-errors "$$am__enable_hard_errors" \
+  --expect-failure "$$am__expect_failure"
+# To be inserted before the command running the test.  Creates the
+# directory for the log if needed.  Stores in $dir the directory
+# containing $f, in $tst the test, in $log the log.  Executes the
+# developer- defined test setup AM_TESTS_ENVIRONMENT (if any), and
+# passes TESTS_ENVIRONMENT.  Set up options for the wrapper that
+# will run the test scripts (or their associated LOG_COMPILER, if
+# thy have one).
+am__check_pre = \
+$(am__sh_e_setup);					\
+$(am__vpath_adj_setup) $(am__vpath_adj)			\
+$(am__tty_colors);					\
+srcdir=$(srcdir); export srcdir;			\
+case "$@" in						\
+  */*) am__odir=`echo "./$@" | sed 's|/[^/]*$$||'`;;	\
+    *) am__odir=.;; 					\
+esac;							\
+test "x$$am__odir" = x"." || test -d "$$am__odir" 	\
+  || $(MKDIR_P) "$$am__odir" || exit $$?;		\
+if test -f "./$$f"; then dir=./;			\
+elif test -f "$$f"; then dir=;				\
+else dir="$(srcdir)/"; fi;				\
+tst=$$dir$$f; log='$@'; 				\
+if test -n '$(DISABLE_HARD_ERRORS)'; then		\
+  am__enable_hard_errors=no; 				\
+else							\
+  am__enable_hard_errors=yes; 				\
+fi; 							\
+case " $(XFAIL_TESTS) " in				\
+  *[\ \	]$$f[\ \	]* | *[\ \	]$$dir$$f[\ \	]*) \
+    am__expect_failure=yes;;				\
+  *)							\
+    am__expect_failure=no;;				\
+esac; 							\
+$(AM_TESTS_ENVIRONMENT) $(TESTS_ENVIRONMENT)
+# A shell command to get the names of the tests scripts with any registered
+# extension removed (i.e., equivalently, the names of the test logs, with
+# the '.log' extension removed).  The result is saved in the shell variable
+# '$bases'.  This honors runtime overriding of TESTS and TEST_LOGS.  Sadly,
+# we cannot use something simpler, involving e.g., "$(TEST_LOGS:.log=)",
+# since that might cause problem with VPATH rewrites for suffix-less tests.
+# See also 'test-harness-vpath-rewrite.sh' and 'test-trs-basic.sh'.
+am__set_TESTS_bases = \
+  bases='$(TEST_LOGS)'; \
+  bases=`for i in $$bases; do echo $$i; done | sed 's/\.log$$//'`; \
+  bases=`echo $$bases`
+RECHECK_LOGS = $(TEST_LOGS)
+TEST_SUITE_LOG = test-suite.log
+TEST_EXTENSIONS = @EXEEXT@ .test
+LOG_DRIVER = $(SHELL) $(top_srcdir)/test-driver
+LOG_COMPILE = $(LOG_COMPILER) $(AM_LOG_FLAGS) $(LOG_FLAGS)
+am__set_b = \
+  case '$@' in \
+    */*) \
+      case '$*' in \
+        */*) b='$*';; \
+          *) b=`echo '$@' | sed 's/\.log$$//'`; \
+       esac;; \
+    *) \
+      b='$*';; \
+  esac
+am__test_logs1 = $(TESTS:=.log)
+am__test_logs2 = $(am__test_logs1:@EXEEXT@.log=.log)
+TEST_LOGS = $(am__test_logs2:.test.log=.log)
+TEST_LOG_DRIVER = $(SHELL) $(top_srcdir)/test-driver
+TEST_LOG_COMPILE = $(TEST_LOG_COMPILER) $(AM_TEST_LOG_FLAGS) \
+	$(TEST_LOG_FLAGS)
 DIST_SUBDIRS = $(SUBDIRS)
 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
 am__relativize = \
@@ -371,7 +630,7 @@ SUBDIRS = docroot
 all: all-recursive
 
 .SUFFIXES:
-.SUFFIXES: .c .lo .o .obj
+.SUFFIXES: .c .lo .log .o .obj .test .test$(EXEEXT) .trs
 $(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
 	@for dep in $?; do \
 	  case '$(am__configure_deps)' in \
@@ -411,9 +670,11 @@ clean-checkPROGRAMS:
 	list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
 	echo " rm -f" $$list; \
 	rm -f $$list
+
 fcgi-auth$(EXEEXT): $(fcgi_auth_OBJECTS) $(fcgi_auth_DEPENDENCIES) $(EXTRA_fcgi_auth_DEPENDENCIES) 
 	@rm -f fcgi-auth$(EXEEXT)
 	$(AM_V_CCLD)$(LINK) $(fcgi_auth_OBJECTS) $(fcgi_auth_LDADD) $(LIBS)
+
 fcgi-responder$(EXEEXT): $(fcgi_responder_OBJECTS) $(fcgi_responder_DEPENDENCIES) $(EXTRA_fcgi_responder_DEPENDENCIES) 
 	@rm -f fcgi-responder$(EXEEXT)
 	$(AM_V_CCLD)$(LINK) $(fcgi_responder_OBJECTS) $(fcgi_responder_LDADD) $(LIBS)
@@ -432,14 +693,14 @@ distclean-compile:
 @am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c $<
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $<
 
 .c.obj:
 @am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
 @am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c `$(CYGPATH_W) '$<'`
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
 
 .c.lo:
 @am__fastdepCC_TRUE@	$(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
@@ -455,22 +716,25 @@ clean-libtool:
 	-rm -rf .libs _libs
 
 # This directory's subdirectories are mostly independent; you can cd
-# into them and run `make' without going through this Makefile.
+# into them and run 'make' without going through this Makefile.
-# To change the values of `make' variables: instead of editing Makefiles,
+# To change the values of 'make' variables: instead of editing Makefiles,
-# (1) if the variable is set in `config.status', edit `config.status'
+# (1) if the variable is set in 'config.status', edit 'config.status'
-#     (which will cause the Makefiles to be regenerated when you run `make');
+#     (which will cause the Makefiles to be regenerated when you run 'make');
-# (2) otherwise, pass the desired values on the `make' command line.
+# (2) otherwise, pass the desired values on the 'make' command line.
-$(RECURSIVE_TARGETS):
+$(am__recursive_targets):
-	@fail= failcom='exit 1'; \
+	@fail=; \
-	for f in x $$MAKEFLAGS; do \
+	if $(am__make_keepgoing); then \
-	  case $$f in \
+	  failcom='fail=yes'; \
-	    *=* | --[!k]*);; \
+	else \
-	    *k*) failcom='fail=yes';; \
+	  failcom='exit 1'; \
-	  esac; \
+	fi; \
-	done; \
 	dot_seen=no; \
 	target=`echo $@ | sed s/-recursive//`; \
-	list='$(SUBDIRS)'; for subdir in $$list; do \
+	case "$@" in \
+	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+	  *) list='$(SUBDIRS)' ;; \
+	esac; \
+	for subdir in $$list; do \
 	  echo "Making $$target in $$subdir"; \
 	  if test "$$subdir" = "."; then \
 	    dot_seen=yes; \
@@ -485,57 +749,12 @@ $(RECURSIVE_TARGETS):
 	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
 	fi; test -z "$$fail"
 
-$(RECURSIVE_CLEAN_TARGETS):
+ID: $(am__tagged_files)
-	@fail= failcom='exit 1'; \
+	$(am__define_uniq_tagged_files); mkid -fID $$unique
-	for f in x $$MAKEFLAGS; do \
+tags: tags-recursive
-	  case $$f in \
+TAGS: tags
-	    *=* | --[!k]*);; \
-	    *k*) failcom='fail=yes';; \
-	  esac; \
-	done; \
-	dot_seen=no; \
-	case "$@" in \
-	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
-	  *) list='$(SUBDIRS)' ;; \
-	esac; \
-	rev=''; for subdir in $$list; do \
-	  if test "$$subdir" = "."; then :; else \
-	    rev="$$subdir $$rev"; \
-	  fi; \
-	done; \
-	rev="$$rev ."; \
-	target=`echo $@ | sed s/-recursive//`; \
-	for subdir in $$rev; do \
-	  echo "Making $$target in $$subdir"; \
-	  if test "$$subdir" = "."; then \
-	    local_target="$$target-am"; \
-	  else \
-	    local_target="$$target"; \
-	  fi; \
-	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
-	  || eval $$failcom; \
-	done && test -z "$$fail"
-tags-recursive:
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
-	done
-ctags-recursive:
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
-	done
 
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
-	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
-	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	mkid -fID $$unique
-tags: TAGS
-
-TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
-		$(TAGS_FILES) $(LISP)
 	set x; \
 	here=`pwd`; \
 	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
@@ -551,12 +770,7 @@ TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
 	  fi; \
 	done; \
-	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
+	$(am__define_uniq_tagged_files); \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
-	      END { if (nonempty) { for (i in files) print i; }; }'`; \
 	shift; \
 	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 	  test -n "$$unique" || unique=$$empty_fix; \
@@ -568,15 +782,11 @@ TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 	      $$unique; \
 	  fi; \
 	fi
-ctags: CTAGS
+ctags: ctags-recursive
-CTAGS: ctags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
+
-		$(TAGS_FILES) $(LISP)
+CTAGS: ctags
-	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
+ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
-	unique=`for i in $$list; do \
+	$(am__define_uniq_tagged_files); \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
-	      END { if (nonempty) { for (i in files) print i; }; }'`; \
 	test -z "$(CTAGS_ARGS)$$unique" \
 	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
 	     $$unique
@@ -585,102 +795,201 @@ GTAGS:
 	here=`$(am__cd) $(top_builddir) && pwd` \
 	  && $(am__cd) $(top_srcdir) \
 	  && gtags -i $(GTAGS_ARGS) "$$here"
+cscopelist: cscopelist-recursive
+
+cscopelist-am: $(am__tagged_files)
+	list='$(am__tagged_files)'; \
+	case "$(srcdir)" in \
+	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
+	  *) sdir=$(subdir)/$(srcdir) ;; \
+	esac; \
+	for i in $$list; do \
+	  if test -f "$$i"; then \
+	    echo "$(subdir)/$$i"; \
+	  else \
+	    echo "$$sdir/$$i"; \
+	  fi; \
+	done >> $(top_builddir)/cscope.files
 
 distclean-tags:
 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
 
-check-TESTS: $(TESTS)
+# Recover from deleted '.trs' file; this should ensure that
-	@failed=0; all=0; xfail=0; xpass=0; skip=0; \
+# "rm -f foo.log; make foo.trs" re-run 'foo.test', and re-create
-	srcdir=$(srcdir); export srcdir; \
+# both 'foo.log' and 'foo.trs'.  Break the recipe in two subshells
-	list=' $(TESTS) '; \
+# to avoid problems with "make -n".
-	$(am__tty_colors); \
+.log.trs:
-	if test -n "$$list"; then \
+	rm -f $< $@
-	  for tst in $$list; do \
+	$(MAKE) $(AM_MAKEFLAGS) $<
-	    if test -f ./$$tst; then dir=./; \
+
-	    elif test -f $$tst; then dir=; \
+# Leading 'am--fnord' is there to ensure the list of targets does not
-	    else dir="$(srcdir)/"; fi; \
+# expand to empty, as could happen e.g. with make check TESTS=''.
-	    if $(TESTS_ENVIRONMENT) $${dir}$$tst; then \
+am--fnord $(TEST_LOGS) $(TEST_LOGS:.log=.trs): $(am__force_recheck)
-	      all=`expr $$all + 1`; \
+am--force-recheck:
-	      case " $(XFAIL_TESTS) " in \
+	@:
-	      *[\ \	]$$tst[\ \	]*) \
+
-		xpass=`expr $$xpass + 1`; \
+$(TEST_SUITE_LOG): $(TEST_LOGS)
-		failed=`expr $$failed + 1`; \
+	@$(am__set_TESTS_bases); \
-		col=$$red; res=XPASS; \
+	am__f_ok () { test -f "$$1" && test -r "$$1"; }; \
-	      ;; \
+	redo_bases=`for i in $$bases; do \
-	      *) \
+	              am__f_ok $$i.trs && am__f_ok $$i.log || echo $$i; \
-		col=$$grn; res=PASS; \
+	            done`; \
-	      ;; \
+	if test -n "$$redo_bases"; then \
-	      esac; \
+	  redo_logs=`for i in $$redo_bases; do echo $$i.log; done`; \
-	    elif test $$? -ne 77; then \
+	  redo_results=`for i in $$redo_bases; do echo $$i.trs; done`; \
-	      all=`expr $$all + 1`; \
+	  if $(am__make_dryrun); then :; else \
-	      case " $(XFAIL_TESTS) " in \
+	    rm -f $$redo_logs && rm -f $$redo_results || exit 1; \
-	      *[\ \	]$$tst[\ \	]*) \
-		xfail=`expr $$xfail + 1`; \
-		col=$$lgn; res=XFAIL; \
-	      ;; \
-	      *) \
-		failed=`expr $$failed + 1`; \
-		col=$$red; res=FAIL; \
-	      ;; \
-	      esac; \
-	    else \
-	      skip=`expr $$skip + 1`; \
-	      col=$$blu; res=SKIP; \
 	  fi; \
-	    echo "$${col}$$res$${std}: $$tst"; \
+	fi; \
+	if test -n "$$am__remaking_logs"; then \
+	  echo "fatal: making $(TEST_SUITE_LOG): possible infinite" \
+	       "recursion detected" >&2; \
+	else \
+	  am__remaking_logs=yes $(MAKE) $(AM_MAKEFLAGS) $$redo_logs; \
+	fi; \
+	if $(am__make_dryrun); then :; else \
+	  st=0;  \
+	  errmsg="fatal: making $(TEST_SUITE_LOG): failed to create"; \
+	  for i in $$redo_bases; do \
+	    test -f $$i.trs && test -r $$i.trs \
+	      || { echo "$$errmsg $$i.trs" >&2; st=1; }; \
+	    test -f $$i.log && test -r $$i.log \
+	      || { echo "$$errmsg $$i.log" >&2; st=1; }; \
 	  done; \
-	  if test "$$all" -eq 1; then \
+	  test $$st -eq 0 || exit 1; \
-	    tests="test"; \
+	fi
-	    All=""; \
+	@$(am__sh_e_setup); $(am__tty_colors); $(am__set_TESTS_bases); \
+	ws='[ 	]'; \
+	results=`for b in $$bases; do echo $$b.trs; done`; \
+	test -n "$$results" || results=/dev/null; \
+	all=`  grep "^$$ws*:test-result:"           $$results | wc -l`; \
+	pass=` grep "^$$ws*:test-result:$$ws*PASS"  $$results | wc -l`; \
+	fail=` grep "^$$ws*:test-result:$$ws*FAIL"  $$results | wc -l`; \
+	skip=` grep "^$$ws*:test-result:$$ws*SKIP"  $$results | wc -l`; \
+	xfail=`grep "^$$ws*:test-result:$$ws*XFAIL" $$results | wc -l`; \
+	xpass=`grep "^$$ws*:test-result:$$ws*XPASS" $$results | wc -l`; \
+	error=`grep "^$$ws*:test-result:$$ws*ERROR" $$results | wc -l`; \
+	if test `expr $$fail + $$xpass + $$error` -eq 0; then \
+	  success=true; \
 	else \
-	    tests="tests"; \
+	  success=false; \
-	    All="All "; \
 	fi; \
-	  if test "$$failed" -eq 0; then \
+	br='==================='; br=$$br$$br$$br$$br; \
-	    if test "$$xfail" -eq 0; then \
+	result_count () \
-	      banner="$$All$$all $$tests passed"; \
+	{ \
+	    if test x"$$1" = x"--maybe-color"; then \
+	      maybe_colorize=yes; \
+	    elif test x"$$1" = x"--no-color"; then \
+	      maybe_colorize=no; \
 	    else \
-	      if test "$$xfail" -eq 1; then failures=failure; else failures=failures; fi; \
+	      echo "$@: invalid 'result_count' usage" >&2; exit 4; \
-	      banner="$$All$$all $$tests behaved as expected ($$xfail expected $$failures)"; \
 	    fi; \
+	    shift; \
+	    desc=$$1 count=$$2; \
+	    if test $$maybe_colorize = yes && test $$count -gt 0; then \
+	      color_start=$$3 color_end=$$std; \
 	    else \
-	    if test "$$xpass" -eq 0; then \
+	      color_start= color_end=; \
-	      banner="$$failed of $$all $$tests failed"; \
-	    else \
-	      if test "$$xpass" -eq 1; then passes=pass; else passes=passes; fi; \
-	      banner="$$failed of $$all $$tests did not behave as expected ($$xpass unexpected $$passes)"; \
 	    fi; \
-	  fi; \
+	    echo "$${color_start}# $$desc $$count$${color_end}"; \
-	  dashes="$$banner"; \
+	}; \
-	  skipped=""; \
+	create_testsuite_report () \
-	  if test "$$skip" -ne 0; then \
+	{ \
-	    if test "$$skip" -eq 1; then \
+	  result_count $$1 "TOTAL:" $$all   "$$brg"; \
-	      skipped="($$skip test was not run)"; \
+	  result_count $$1 "PASS: " $$pass  "$$grn"; \
-	    else \
+	  result_count $$1 "SKIP: " $$skip  "$$blu"; \
-	      skipped="($$skip tests were not run)"; \
+	  result_count $$1 "XFAIL:" $$xfail "$$lgn"; \
-	    fi; \
+	  result_count $$1 "FAIL: " $$fail  "$$red"; \
-	    test `echo "$$skipped" | wc -c` -le `echo "$$banner" | wc -c` || \
+	  result_count $$1 "XPASS:" $$xpass "$$red"; \
-	      dashes="$$skipped"; \
+	  result_count $$1 "ERROR:" $$error "$$mgn"; \
-	  fi; \
+	}; \
-	  report=""; \
+	{								\
-	  if test "$$failed" -ne 0 && test -n "$(PACKAGE_BUGREPORT)"; then \
+	  echo "$(PACKAGE_STRING): $(subdir)/$(TEST_SUITE_LOG)" |	\
-	    report="Please report to $(PACKAGE_BUGREPORT)"; \
+	    $(am__rst_title);						\
-	    test `echo "$$report" | wc -c` -le `echo "$$banner" | wc -c` || \
+	  create_testsuite_report --no-color;				\
-	      dashes="$$report"; \
+	  echo;								\
-	  fi; \
+	  echo ".. contents:: :depth: 2";				\
-	  dashes=`echo "$$dashes" | sed s/./=/g`; \
+	  echo;								\
-	  if test "$$failed" -eq 0; then \
+	  for b in $$bases; do echo $$b; done				\
+	    | $(am__create_global_log);					\
+	} >$(TEST_SUITE_LOG).tmp || exit 1;				\
+	mv $(TEST_SUITE_LOG).tmp $(TEST_SUITE_LOG);			\
+	if $$success; then						\
 	  col="$$grn";							\
 	 else								\
 	  col="$$red";							\
+	  test x"$$VERBOSE" = x || cat $(TEST_SUITE_LOG);		\
 	fi;								\
-	  echo "$${col}$$dashes$${std}"; \
+	echo "$${col}$$br$${std}"; 					\
-	  echo "$${col}$$banner$${std}"; \
+	echo "$${col}Testsuite summary for $(PACKAGE_STRING)$${std}";	\
-	  test -z "$$skipped" || echo "$${col}$$skipped$${std}"; \
+	echo "$${col}$$br$${std}"; 					\
-	  test -z "$$report" || echo "$${col}$$report$${std}"; \
+	create_testsuite_report --maybe-color;				\
-	  echo "$${col}$$dashes$${std}"; \
+	echo "$$col$$br$$std";						\
-	  test "$$failed" -eq 0; \
+	if $$success; then :; else					\
-	else :; fi
+	  echo "$${col}See $(subdir)/$(TEST_SUITE_LOG)$${std}";		\
+	  if test -n "$(PACKAGE_BUGREPORT)"; then			\
+	    echo "$${col}Please report to $(PACKAGE_BUGREPORT)$${std}";	\
+	  fi;								\
+	  echo "$$col$$br$$std";					\
+	fi;								\
+	$$success || exit 1
+
+check-TESTS:
+	@list='$(RECHECK_LOGS)';           test -z "$$list" || rm -f $$list
+	@list='$(RECHECK_LOGS:.log=.trs)'; test -z "$$list" || rm -f $$list
+	@test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
+	@set +e; $(am__set_TESTS_bases); \
+	log_list=`for i in $$bases; do echo $$i.log; done`; \
+	trs_list=`for i in $$bases; do echo $$i.trs; done`; \
+	log_list=`echo $$log_list`; trs_list=`echo $$trs_list`; \
+	$(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) TEST_LOGS="$$log_list"; \
+	exit $$?;
+recheck: all $(check_PROGRAMS)
+	@test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
+	@set +e; $(am__set_TESTS_bases); \
+	bases=`for i in $$bases; do echo $$i; done \
+	         | $(am__list_recheck_tests)` || exit 1; \
+	log_list=`for i in $$bases; do echo $$i.log; done`; \
+	log_list=`echo $$log_list`; \
+	$(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) \
+	        am__force_recheck=am--force-recheck \
+	        TEST_LOGS="$$log_list"; \
+	exit $$?
+prepare.sh.log: prepare.sh
+	@p='prepare.sh'; \
+	b='prepare.sh'; \
+	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
+	--log-file $$b.log --trs-file $$b.trs \
+	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
+	"$$tst" $(AM_TESTS_FD_REDIRECT)
+run-tests.pl.log: run-tests.pl
+	@p='run-tests.pl'; \
+	b='run-tests.pl'; \
+	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
+	--log-file $$b.log --trs-file $$b.trs \
+	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
+	"$$tst" $(AM_TESTS_FD_REDIRECT)
+cleanup.sh.log: cleanup.sh
+	@p='cleanup.sh'; \
+	b='cleanup.sh'; \
+	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
+	--log-file $$b.log --trs-file $$b.trs \
+	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
+	"$$tst" $(AM_TESTS_FD_REDIRECT)
+.test.log:
+	@p='$<'; \
+	$(am__set_b); \
+	$(am__check_pre) $(TEST_LOG_DRIVER) --test-name "$$f" \
+	--log-file $$b.log --trs-file $$b.trs \
+	$(am__common_driver_flags) $(AM_TEST_LOG_DRIVER_FLAGS) $(TEST_LOG_DRIVER_FLAGS) -- $(TEST_LOG_COMPILE) \
+	"$$tst" $(AM_TESTS_FD_REDIRECT)
+@am__EXEEXT_TRUE@.test$(EXEEXT).log:
+@am__EXEEXT_TRUE@	@p='$<'; \
+@am__EXEEXT_TRUE@	$(am__set_b); \
+@am__EXEEXT_TRUE@	$(am__check_pre) $(TEST_LOG_DRIVER) --test-name "$$f" \
+@am__EXEEXT_TRUE@	--log-file $$b.log --trs-file $$b.trs \
+@am__EXEEXT_TRUE@	$(am__common_driver_flags) $(AM_TEST_LOG_DRIVER_FLAGS) $(TEST_LOG_DRIVER_FLAGS) -- $(TEST_LOG_COMPILE) \
+@am__EXEEXT_TRUE@	"$$tst" $(AM_TESTS_FD_REDIRECT)
 
 distdir: $(DISTFILES)
 	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
@@ -764,6 +1073,9 @@ install-strip:
 	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
 	fi
 mostlyclean-generic:
+	-test -z "$(TEST_LOGS)" || rm -f $(TEST_LOGS)
+	-test -z "$(TEST_LOGS:.log=.trs)" || rm -f $(TEST_LOGS:.log=.trs)
+	-test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
 
 clean-generic:
 
@@ -845,23 +1157,22 @@ ps-am:
 
 uninstall-am:
 
-.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) check-am \
+.MAKE: $(am__recursive_targets) check-am install-am install-strip
-	ctags-recursive install-am install-strip tags-recursive
 
-.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
+.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am check \
-	all all-am check check-TESTS check-am clean \
+	check-TESTS check-am clean clean-checkPROGRAMS clean-generic \
-	clean-checkPROGRAMS clean-generic clean-libtool clean-local \
+	clean-libtool clean-local cscopelist-am ctags ctags-am \
-	ctags ctags-recursive distclean distclean-compile \
+	distclean distclean-compile distclean-generic \
-	distclean-generic distclean-libtool distclean-tags distdir dvi \
+	distclean-libtool distclean-tags distdir dvi dvi-am html \
-	dvi-am html html-am info info-am install install-am \
+	html-am info info-am install install-am install-data \
-	install-data install-data-am install-dvi install-dvi-am \
+	install-data-am install-dvi install-dvi-am install-exec \
-	install-exec install-exec-am install-html install-html-am \
+	install-exec-am install-html install-html-am install-info \
-	install-info install-info-am install-man install-pdf \
+	install-info-am install-man install-pdf install-pdf-am \
-	install-pdf-am install-ps install-ps-am install-strip \
+	install-ps install-ps-am install-strip installcheck \
-	installcheck installcheck-am installdirs installdirs-am \
+	installcheck-am installdirs installdirs-am maintainer-clean \
-	maintainer-clean maintainer-clean-generic mostlyclean \
+	maintainer-clean-generic mostlyclean mostlyclean-compile \
-	mostlyclean-compile mostlyclean-generic mostlyclean-libtool \
+	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
-	pdf pdf-am ps ps-am tags tags-recursive uninstall uninstall-am
+	recheck tags tags-am uninstall uninstall-am
 
 
 leak-check:

apps/lighttpd-1.4.32/tests/docroot/123/Makefile.in

@@ -1,9 +1,8 @@
-# Makefile.in generated by automake 1.11.6 from Makefile.am.
+# Makefile.in generated by automake 1.14.1 from Makefile.am.
 # @configure_input@
 
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# Copyright (C) 1994-2013 Free Software Foundation, Inc.
-# 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software
+
-# Foundation, Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -15,23 +14,51 @@
 
 @SET_MAKE@
 VPATH = @srcdir@
-am__make_dryrun = \
+am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
-  { \
+am__make_running_with_option = \
-    am__dry=no; \
+  case $${target_option-} in \
+      ?) ;; \
+      *) echo "am__make_running_with_option: internal error: invalid" \
+              "target option '$${target_option-}' specified" >&2; \
+         exit 1;; \
+  esac; \
+  has_opt=no; \
+  sane_makeflags=$$MAKEFLAGS; \
+  if $(am__is_gnu_make); then \
+    sane_makeflags=$$MFLAGS; \
+  else \
     case $$MAKEFLAGS in \
       *\\[\ \	]*) \
-        echo 'am--echo: ; @echo "AM"  OK' | $(MAKE) -f - 2>/dev/null \
+        bs=\\; \
-          | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
+        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
-      *) \
+          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
-        for am__flg in $$MAKEFLAGS; do \
-          case $$am__flg in \
-            *=*|--*) ;; \
-            *n*) am__dry=yes; break;; \
     esac; \
-        done;; \
+  fi; \
+  skip_next=no; \
+  strip_trailopt () \
+  { \
+    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+  }; \
+  for flg in $$sane_makeflags; do \
+    test $$skip_next = yes && { skip_next=no; continue; }; \
+    case $$flg in \
+      *=*|--*) continue;; \
+        -*I) strip_trailopt 'I'; skip_next=yes;; \
+      -*I?*) strip_trailopt 'I';; \
+        -*O) strip_trailopt 'O'; skip_next=yes;; \
+      -*O?*) strip_trailopt 'O';; \
+        -*l) strip_trailopt 'l'; skip_next=yes;; \
+      -*l?*) strip_trailopt 'l';; \
+      -[dEDm]) skip_next=yes;; \
+      -[JT]) skip_next=yes;; \
     esac; \
-    test $$am__dry = yes; \
+    case $$flg in \
-  }
+      *$$target_option*) has_opt=yes; break;; \
+    esac; \
+  done; \
+  test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
 pkgdatadir = $(datadir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
 pkglibdir = $(libdir)/@PACKAGE@
@@ -52,7 +79,7 @@ build_triplet = @build@
 host_triplet = @host@
 target_triplet = @target@
 subdir = tests/docroot/123
-DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
+DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
 am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \
 	$(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
@@ -64,12 +91,18 @@ mkinstalldirs = $(install_sh) -d
 CONFIG_HEADER = $(top_builddir)/config.h
 CONFIG_CLEAN_FILES =
 CONFIG_CLEAN_VPATH_FILES =
+AM_V_P = $(am__v_P_@AM_V@)
+am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
+am__v_P_0 = false
+am__v_P_1 = :
 AM_V_GEN = $(am__v_GEN_@AM_V@)
 am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
 am__v_GEN_0 = @echo "  GEN     " $@;
+am__v_GEN_1 = 
 AM_V_at = $(am__v_at_@AM_V@)
 am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
 am__v_at_0 = @
+am__v_at_1 = 
 SOURCES =
 DIST_SOURCES =
 am__can_run_installinfo = \
@@ -77,6 +110,7 @@ am__can_run_installinfo = \
     n|no|NO) false;; \
     *) (install-info --version) >/dev/null 2>&1;; \
   esac
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
 ACLOCAL = @ACLOCAL@
 AMTAR = @AMTAR@
@@ -272,11 +306,11 @@ mostlyclean-libtool:
 
 clean-libtool:
 	-rm -rf .libs _libs
-tags: TAGS
+tags TAGS:
-TAGS:
 
-ctags: CTAGS
+ctags CTAGS:
-CTAGS:
+
+cscope cscopelist:
 
 
 distdir: $(DISTFILES)
@@ -412,15 +446,16 @@ uninstall-am:
 .MAKE: install-am install-strip
 
 .PHONY: all all-am check check-am clean clean-generic clean-libtool \
-	distclean distclean-generic distclean-libtool distdir dvi \
+	cscopelist-am ctags-am distclean distclean-generic \
-	dvi-am html html-am info info-am install install-am \
+	distclean-libtool distdir dvi dvi-am html html-am info info-am \
-	install-data install-data-am install-dvi install-dvi-am \
+	install install-am install-data install-data-am install-dvi \
-	install-exec install-exec-am install-html install-html-am \
+	install-dvi-am install-exec install-exec-am install-html \
-	install-info install-info-am install-man install-pdf \
+	install-html-am install-info install-info-am install-man \
-	install-pdf-am install-ps install-ps-am install-strip \
+	install-pdf install-pdf-am install-ps install-ps-am \
-	installcheck installcheck-am installdirs maintainer-clean \
+	install-strip installcheck installcheck-am installdirs \
-	maintainer-clean-generic mostlyclean mostlyclean-generic \
+	maintainer-clean maintainer-clean-generic mostlyclean \
-	mostlyclean-libtool pdf pdf-am ps ps-am uninstall uninstall-am
+	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
+	tags-am uninstall uninstall-am
 
 
 # Tell versions [3.59,3.63) of GNU make to not export all variables.

apps/lighttpd-1.4.32/tests/docroot/Makefile.in

@@ -1,9 +1,8 @@
-# Makefile.in generated by automake 1.11.6 from Makefile.am.
+# Makefile.in generated by automake 1.14.1 from Makefile.am.
 # @configure_input@
 
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# Copyright (C) 1994-2013 Free Software Foundation, Inc.
-# 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software
+
-# Foundation, Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -15,23 +14,51 @@
 
 @SET_MAKE@
 VPATH = @srcdir@
-am__make_dryrun = \
+am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
-  { \
+am__make_running_with_option = \
-    am__dry=no; \
+  case $${target_option-} in \
+      ?) ;; \
+      *) echo "am__make_running_with_option: internal error: invalid" \
+              "target option '$${target_option-}' specified" >&2; \
+         exit 1;; \
+  esac; \
+  has_opt=no; \
+  sane_makeflags=$$MAKEFLAGS; \
+  if $(am__is_gnu_make); then \
+    sane_makeflags=$$MFLAGS; \
+  else \
     case $$MAKEFLAGS in \
       *\\[\ \	]*) \
-        echo 'am--echo: ; @echo "AM"  OK' | $(MAKE) -f - 2>/dev/null \
+        bs=\\; \
-          | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
+        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
-      *) \
+          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
-        for am__flg in $$MAKEFLAGS; do \
-          case $$am__flg in \
-            *=*|--*) ;; \
-            *n*) am__dry=yes; break;; \
     esac; \
-        done;; \
+  fi; \
+  skip_next=no; \
+  strip_trailopt () \
+  { \
+    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+  }; \
+  for flg in $$sane_makeflags; do \
+    test $$skip_next = yes && { skip_next=no; continue; }; \
+    case $$flg in \
+      *=*|--*) continue;; \
+        -*I) strip_trailopt 'I'; skip_next=yes;; \
+      -*I?*) strip_trailopt 'I';; \
+        -*O) strip_trailopt 'O'; skip_next=yes;; \
+      -*O?*) strip_trailopt 'O';; \
+        -*l) strip_trailopt 'l'; skip_next=yes;; \
+      -*l?*) strip_trailopt 'l';; \
+      -[dEDm]) skip_next=yes;; \
+      -[JT]) skip_next=yes;; \
     esac; \
-    test $$am__dry = yes; \
+    case $$flg in \
-  }
+      *$$target_option*) has_opt=yes; break;; \
+    esac; \
+  done; \
+  test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
 pkgdatadir = $(datadir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
 pkglibdir = $(libdir)/@PACKAGE@
@@ -52,7 +79,7 @@ build_triplet = @build@
 host_triplet = @host@
 target_triplet = @target@
 subdir = tests/docroot
-DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
+DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
 am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \
 	$(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
@@ -64,21 +91,28 @@ mkinstalldirs = $(install_sh) -d
 CONFIG_HEADER = $(top_builddir)/config.h
 CONFIG_CLEAN_FILES =
 CONFIG_CLEAN_VPATH_FILES =
+AM_V_P = $(am__v_P_@AM_V@)
+am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
+am__v_P_0 = false
+am__v_P_1 = :
 AM_V_GEN = $(am__v_GEN_@AM_V@)
 am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
 am__v_GEN_0 = @echo "  GEN     " $@;
+am__v_GEN_1 = 
 AM_V_at = $(am__v_at_@AM_V@)
 am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
 am__v_at_0 = @
+am__v_at_1 = 
 SOURCES =
 DIST_SOURCES =
-RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
+RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
-	html-recursive info-recursive install-data-recursive \
+	ctags-recursive dvi-recursive html-recursive info-recursive \
-	install-dvi-recursive install-exec-recursive \
+	install-data-recursive install-dvi-recursive \
-	install-html-recursive install-info-recursive \
+	install-exec-recursive install-html-recursive \
-	install-pdf-recursive install-ps-recursive install-recursive \
+	install-info-recursive install-pdf-recursive \
-	installcheck-recursive installdirs-recursive pdf-recursive \
+	install-ps-recursive install-recursive installcheck-recursive \
-	ps-recursive uninstall-recursive
+	installdirs-recursive pdf-recursive ps-recursive \
+	tags-recursive uninstall-recursive
 am__can_run_installinfo = \
   case $$AM_UPDATE_INFO_DIR in \
     n|no|NO) false;; \
@@ -86,9 +120,29 @@ am__can_run_installinfo = \
   esac
 RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
   distclean-recursive maintainer-clean-recursive
-AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
+am__recursive_targets = \
-	$(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
+  $(RECURSIVE_TARGETS) \
+  $(RECURSIVE_CLEAN_TARGETS) \
+  $(am__extra_recursive_targets)
+AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
 	distdir
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
+# Read a list of newline-separated strings from the standard input,
+# and print each of them once, without duplicates.  Input order is
+# *not* preserved.
+am__uniquify_input = $(AWK) '\
+  BEGIN { nonempty = 0; } \
+  { items[$$0] = 1; nonempty = 1; } \
+  END { if (nonempty) { for (i in items) print i; }; } \
+'
+# Make sure the list of sources is unique.  This is necessary because,
+# e.g., the same source file might be shared among _SOURCES variables
+# for different programs/libraries.
+am__define_uniq_tagged_files = \
+  list='$(am__tagged_files)'; \
+  unique=`for i in $$list; do \
+    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+  done | $(am__uniquify_input)`
 ETAGS = etags
 CTAGS = ctags
 DIST_SUBDIRS = $(SUBDIRS)
@@ -314,22 +368,25 @@ clean-libtool:
 	-rm -rf .libs _libs
 
 # This directory's subdirectories are mostly independent; you can cd
-# into them and run `make' without going through this Makefile.
+# into them and run 'make' without going through this Makefile.
-# To change the values of `make' variables: instead of editing Makefiles,
+# To change the values of 'make' variables: instead of editing Makefiles,
-# (1) if the variable is set in `config.status', edit `config.status'
+# (1) if the variable is set in 'config.status', edit 'config.status'
-#     (which will cause the Makefiles to be regenerated when you run `make');
+#     (which will cause the Makefiles to be regenerated when you run 'make');
-# (2) otherwise, pass the desired values on the `make' command line.
+# (2) otherwise, pass the desired values on the 'make' command line.
-$(RECURSIVE_TARGETS):
+$(am__recursive_targets):
-	@fail= failcom='exit 1'; \
+	@fail=; \
-	for f in x $$MAKEFLAGS; do \
+	if $(am__make_keepgoing); then \
-	  case $$f in \
+	  failcom='fail=yes'; \
-	    *=* | --[!k]*);; \
+	else \
-	    *k*) failcom='fail=yes';; \
+	  failcom='exit 1'; \
-	  esac; \
+	fi; \
-	done; \
 	dot_seen=no; \
 	target=`echo $@ | sed s/-recursive//`; \
-	list='$(SUBDIRS)'; for subdir in $$list; do \
+	case "$@" in \
+	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+	  *) list='$(SUBDIRS)' ;; \
+	esac; \
+	for subdir in $$list; do \
 	  echo "Making $$target in $$subdir"; \
 	  if test "$$subdir" = "."; then \
 	    dot_seen=yes; \
@@ -344,57 +401,12 @@ $(RECURSIVE_TARGETS):
 	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
 	fi; test -z "$$fail"
 
-$(RECURSIVE_CLEAN_TARGETS):
+ID: $(am__tagged_files)
-	@fail= failcom='exit 1'; \
+	$(am__define_uniq_tagged_files); mkid -fID $$unique
-	for f in x $$MAKEFLAGS; do \
+tags: tags-recursive
-	  case $$f in \
+TAGS: tags
-	    *=* | --[!k]*);; \
-	    *k*) failcom='fail=yes';; \
-	  esac; \
-	done; \
-	dot_seen=no; \
-	case "$@" in \
-	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
-	  *) list='$(SUBDIRS)' ;; \
-	esac; \
-	rev=''; for subdir in $$list; do \
-	  if test "$$subdir" = "."; then :; else \
-	    rev="$$subdir $$rev"; \
-	  fi; \
-	done; \
-	rev="$$rev ."; \
-	target=`echo $@ | sed s/-recursive//`; \
-	for subdir in $$rev; do \
-	  echo "Making $$target in $$subdir"; \
-	  if test "$$subdir" = "."; then \
-	    local_target="$$target-am"; \
-	  else \
-	    local_target="$$target"; \
-	  fi; \
-	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
-	  || eval $$failcom; \
-	done && test -z "$$fail"
-tags-recursive:
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
-	done
-ctags-recursive:
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
-	done
 
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
-	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
-	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	mkid -fID $$unique
-tags: TAGS
-
-TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
-		$(TAGS_FILES) $(LISP)
 	set x; \
 	here=`pwd`; \
 	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
@@ -410,12 +422,7 @@ TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
 	  fi; \
 	done; \
-	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
+	$(am__define_uniq_tagged_files); \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
-	      END { if (nonempty) { for (i in files) print i; }; }'`; \
 	shift; \
 	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 	  test -n "$$unique" || unique=$$empty_fix; \
@@ -427,15 +434,11 @@ TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 	      $$unique; \
 	  fi; \
 	fi
-ctags: CTAGS
+ctags: ctags-recursive
-CTAGS: ctags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
+
-		$(TAGS_FILES) $(LISP)
+CTAGS: ctags
-	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
+ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
-	unique=`for i in $$list; do \
+	$(am__define_uniq_tagged_files); \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
-	      END { if (nonempty) { for (i in files) print i; }; }'`; \
 	test -z "$(CTAGS_ARGS)$$unique" \
 	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
 	     $$unique
@@ -444,6 +447,21 @@ GTAGS:
 	here=`$(am__cd) $(top_builddir) && pwd` \
 	  && $(am__cd) $(top_srcdir) \
 	  && gtags -i $(GTAGS_ARGS) "$$here"
+cscopelist: cscopelist-recursive
+
+cscopelist-am: $(am__tagged_files)
+	list='$(am__tagged_files)'; \
+	case "$(srcdir)" in \
+	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
+	  *) sdir=$(subdir)/$(srcdir) ;; \
+	esac; \
+	for i in $$list; do \
+	  if test -f "$$i"; then \
+	    echo "$(subdir)/$$i"; \
+	  else \
+	    echo "$$sdir/$$i"; \
+	  fi; \
+	done >> $(top_builddir)/cscope.files
 
 distclean-tags:
 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
@@ -604,22 +622,20 @@ ps-am:
 
 uninstall-am:
 
-.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \
+.MAKE: $(am__recursive_targets) install-am install-strip
-	install-am install-strip tags-recursive
 
-.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
+.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am check \
-	all all-am check check-am clean clean-generic clean-libtool \
+	check-am clean clean-generic clean-libtool cscopelist-am ctags \
-	ctags ctags-recursive distclean distclean-generic \
+	ctags-am distclean distclean-generic distclean-libtool \
-	distclean-libtool distclean-tags distdir dvi dvi-am html \
+	distclean-tags distdir dvi dvi-am html html-am info info-am \
-	html-am info info-am install install-am install-data \
+	install install-am install-data install-data-am install-dvi \
-	install-data-am install-dvi install-dvi-am install-exec \
+	install-dvi-am install-exec install-exec-am install-html \
-	install-exec-am install-html install-html-am install-info \
+	install-html-am install-info install-info-am install-man \
-	install-info-am install-man install-pdf install-pdf-am \
+	install-pdf install-pdf-am install-ps install-ps-am \
-	install-ps install-ps-am install-strip installcheck \
+	install-strip installcheck installcheck-am installdirs \
-	installcheck-am installdirs installdirs-am maintainer-clean \
+	installdirs-am maintainer-clean maintainer-clean-generic \
-	maintainer-clean-generic mostlyclean mostlyclean-generic \
+	mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \
-	mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \
+	ps ps-am tags tags-am uninstall uninstall-am
-	uninstall uninstall-am
 
 
 # Tell versions [3.59,3.63) of GNU make to not export all variables.

apps/lighttpd-1.4.32/tests/docroot/www/Makefile.in

@@ -1,9 +1,8 @@
-# Makefile.in generated by automake 1.11.6 from Makefile.am.
+# Makefile.in generated by automake 1.14.1 from Makefile.am.
 # @configure_input@
 
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# Copyright (C) 1994-2013 Free Software Foundation, Inc.
-# 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software
+
-# Foundation, Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -15,23 +14,51 @@
 
 @SET_MAKE@
 VPATH = @srcdir@
-am__make_dryrun = \
+am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
-  { \
+am__make_running_with_option = \
-    am__dry=no; \
+  case $${target_option-} in \
+      ?) ;; \
+      *) echo "am__make_running_with_option: internal error: invalid" \
+              "target option '$${target_option-}' specified" >&2; \
+         exit 1;; \
+  esac; \
+  has_opt=no; \
+  sane_makeflags=$$MAKEFLAGS; \
+  if $(am__is_gnu_make); then \
+    sane_makeflags=$$MFLAGS; \
+  else \
     case $$MAKEFLAGS in \
       *\\[\ \	]*) \
-        echo 'am--echo: ; @echo "AM"  OK' | $(MAKE) -f - 2>/dev/null \
+        bs=\\; \
-          | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
+        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
-      *) \
+          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
-        for am__flg in $$MAKEFLAGS; do \
-          case $$am__flg in \
-            *=*|--*) ;; \
-            *n*) am__dry=yes; break;; \
     esac; \
-        done;; \
+  fi; \
+  skip_next=no; \
+  strip_trailopt () \
+  { \
+    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+  }; \
+  for flg in $$sane_makeflags; do \
+    test $$skip_next = yes && { skip_next=no; continue; }; \
+    case $$flg in \
+      *=*|--*) continue;; \
+        -*I) strip_trailopt 'I'; skip_next=yes;; \
+      -*I?*) strip_trailopt 'I';; \
+        -*O) strip_trailopt 'O'; skip_next=yes;; \
+      -*O?*) strip_trailopt 'O';; \
+        -*l) strip_trailopt 'l'; skip_next=yes;; \
+      -*l?*) strip_trailopt 'l';; \
+      -[dEDm]) skip_next=yes;; \
+      -[JT]) skip_next=yes;; \
     esac; \
-    test $$am__dry = yes; \
+    case $$flg in \
-  }
+      *$$target_option*) has_opt=yes; break;; \
+    esac; \
+  done; \
+  test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
 pkgdatadir = $(datadir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
 pkglibdir = $(libdir)/@PACKAGE@
@@ -52,7 +79,7 @@ build_triplet = @build@
 host_triplet = @host@
 target_triplet = @target@
 subdir = tests/docroot/www
-DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
+DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
 am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \
 	$(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
@@ -64,21 +91,28 @@ mkinstalldirs = $(install_sh) -d
 CONFIG_HEADER = $(top_builddir)/config.h
 CONFIG_CLEAN_FILES =
 CONFIG_CLEAN_VPATH_FILES =
+AM_V_P = $(am__v_P_@AM_V@)
+am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
+am__v_P_0 = false
+am__v_P_1 = :
 AM_V_GEN = $(am__v_GEN_@AM_V@)
 am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
 am__v_GEN_0 = @echo "  GEN     " $@;
+am__v_GEN_1 = 
 AM_V_at = $(am__v_at_@AM_V@)
 am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
 am__v_at_0 = @
+am__v_at_1 = 
 SOURCES =
 DIST_SOURCES =
-RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
+RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
-	html-recursive info-recursive install-data-recursive \
+	ctags-recursive dvi-recursive html-recursive info-recursive \
-	install-dvi-recursive install-exec-recursive \
+	install-data-recursive install-dvi-recursive \
-	install-html-recursive install-info-recursive \
+	install-exec-recursive install-html-recursive \
-	install-pdf-recursive install-ps-recursive install-recursive \
+	install-info-recursive install-pdf-recursive \
-	installcheck-recursive installdirs-recursive pdf-recursive \
+	install-ps-recursive install-recursive installcheck-recursive \
-	ps-recursive uninstall-recursive
+	installdirs-recursive pdf-recursive ps-recursive \
+	tags-recursive uninstall-recursive
 am__can_run_installinfo = \
   case $$AM_UPDATE_INFO_DIR in \
     n|no|NO) false;; \
@@ -86,9 +120,29 @@ am__can_run_installinfo = \
   esac
 RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
   distclean-recursive maintainer-clean-recursive
-AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
+am__recursive_targets = \
-	$(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
+  $(RECURSIVE_TARGETS) \
+  $(RECURSIVE_CLEAN_TARGETS) \
+  $(am__extra_recursive_targets)
+AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
 	distdir
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
+# Read a list of newline-separated strings from the standard input,
+# and print each of them once, without duplicates.  Input order is
+# *not* preserved.
+am__uniquify_input = $(AWK) '\
+  BEGIN { nonempty = 0; } \
+  { items[$$0] = 1; nonempty = 1; } \
+  END { if (nonempty) { for (i in items) print i; }; } \
+'
+# Make sure the list of sources is unique.  This is necessary because,
+# e.g., the same source file might be shared among _SOURCES variables
+# for different programs/libraries.
+am__define_uniq_tagged_files = \
+  list='$(am__tagged_files)'; \
+  unique=`for i in $$list; do \
+    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+  done | $(am__uniquify_input)`
 ETAGS = etags
 CTAGS = ctags
 DIST_SUBDIRS = $(SUBDIRS)
@@ -319,22 +373,25 @@ clean-libtool:
 	-rm -rf .libs _libs
 
 # This directory's subdirectories are mostly independent; you can cd
-# into them and run `make' without going through this Makefile.
+# into them and run 'make' without going through this Makefile.
-# To change the values of `make' variables: instead of editing Makefiles,
+# To change the values of 'make' variables: instead of editing Makefiles,
-# (1) if the variable is set in `config.status', edit `config.status'
+# (1) if the variable is set in 'config.status', edit 'config.status'
-#     (which will cause the Makefiles to be regenerated when you run `make');
+#     (which will cause the Makefiles to be regenerated when you run 'make');
-# (2) otherwise, pass the desired values on the `make' command line.
+# (2) otherwise, pass the desired values on the 'make' command line.
-$(RECURSIVE_TARGETS):
+$(am__recursive_targets):
-	@fail= failcom='exit 1'; \
+	@fail=; \
-	for f in x $$MAKEFLAGS; do \
+	if $(am__make_keepgoing); then \
-	  case $$f in \
+	  failcom='fail=yes'; \
-	    *=* | --[!k]*);; \
+	else \
-	    *k*) failcom='fail=yes';; \
+	  failcom='exit 1'; \
-	  esac; \
+	fi; \
-	done; \
 	dot_seen=no; \
 	target=`echo $@ | sed s/-recursive//`; \
-	list='$(SUBDIRS)'; for subdir in $$list; do \
+	case "$@" in \
+	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+	  *) list='$(SUBDIRS)' ;; \
+	esac; \
+	for subdir in $$list; do \
 	  echo "Making $$target in $$subdir"; \
 	  if test "$$subdir" = "."; then \
 	    dot_seen=yes; \
@@ -349,57 +406,12 @@ $(RECURSIVE_TARGETS):
 	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
 	fi; test -z "$$fail"
 
-$(RECURSIVE_CLEAN_TARGETS):
+ID: $(am__tagged_files)
-	@fail= failcom='exit 1'; \
+	$(am__define_uniq_tagged_files); mkid -fID $$unique
-	for f in x $$MAKEFLAGS; do \
+tags: tags-recursive
-	  case $$f in \
+TAGS: tags
-	    *=* | --[!k]*);; \
-	    *k*) failcom='fail=yes';; \
-	  esac; \
-	done; \
-	dot_seen=no; \
-	case "$@" in \
-	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
-	  *) list='$(SUBDIRS)' ;; \
-	esac; \
-	rev=''; for subdir in $$list; do \
-	  if test "$$subdir" = "."; then :; else \
-	    rev="$$subdir $$rev"; \
-	  fi; \
-	done; \
-	rev="$$rev ."; \
-	target=`echo $@ | sed s/-recursive//`; \
-	for subdir in $$rev; do \
-	  echo "Making $$target in $$subdir"; \
-	  if test "$$subdir" = "."; then \
-	    local_target="$$target-am"; \
-	  else \
-	    local_target="$$target"; \
-	  fi; \
-	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
-	  || eval $$failcom; \
-	done && test -z "$$fail"
-tags-recursive:
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
-	done
-ctags-recursive:
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
-	done
 
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
-	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
-	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	mkid -fID $$unique
-tags: TAGS
-
-TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
-		$(TAGS_FILES) $(LISP)
 	set x; \
 	here=`pwd`; \
 	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
@@ -415,12 +427,7 @@ TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
 	  fi; \
 	done; \
-	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
+	$(am__define_uniq_tagged_files); \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
-	      END { if (nonempty) { for (i in files) print i; }; }'`; \
 	shift; \
 	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 	  test -n "$$unique" || unique=$$empty_fix; \
@@ -432,15 +439,11 @@ TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 	      $$unique; \
 	  fi; \
 	fi
-ctags: CTAGS
+ctags: ctags-recursive
-CTAGS: ctags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
+
-		$(TAGS_FILES) $(LISP)
+CTAGS: ctags
-	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
+ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
-	unique=`for i in $$list; do \
+	$(am__define_uniq_tagged_files); \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
-	      END { if (nonempty) { for (i in files) print i; }; }'`; \
 	test -z "$(CTAGS_ARGS)$$unique" \
 	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
 	     $$unique
@@ -449,6 +452,21 @@ GTAGS:
 	here=`$(am__cd) $(top_builddir) && pwd` \
 	  && $(am__cd) $(top_srcdir) \
 	  && gtags -i $(GTAGS_ARGS) "$$here"
+cscopelist: cscopelist-recursive
+
+cscopelist-am: $(am__tagged_files)
+	list='$(am__tagged_files)'; \
+	case "$(srcdir)" in \
+	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
+	  *) sdir=$(subdir)/$(srcdir) ;; \
+	esac; \
+	for i in $$list; do \
+	  if test -f "$$i"; then \
+	    echo "$(subdir)/$$i"; \
+	  else \
+	    echo "$$sdir/$$i"; \
+	  fi; \
+	done >> $(top_builddir)/cscope.files
 
 distclean-tags:
 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
@@ -609,22 +627,20 @@ ps-am:
 
 uninstall-am:
 
-.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \
+.MAKE: $(am__recursive_targets) install-am install-strip
-	install-am install-strip tags-recursive
 
-.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
+.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am check \
-	all all-am check check-am clean clean-generic clean-libtool \
+	check-am clean clean-generic clean-libtool cscopelist-am ctags \
-	ctags ctags-recursive distclean distclean-generic \
+	ctags-am distclean distclean-generic distclean-libtool \
-	distclean-libtool distclean-tags distdir dvi dvi-am html \
+	distclean-tags distdir dvi dvi-am html html-am info info-am \
-	html-am info info-am install install-am install-data \
+	install install-am install-data install-data-am install-dvi \
-	install-data-am install-dvi install-dvi-am install-exec \
+	install-dvi-am install-exec install-exec-am install-html \
-	install-exec-am install-html install-html-am install-info \
+	install-html-am install-info install-info-am install-man \
-	install-info-am install-man install-pdf install-pdf-am \
+	install-pdf install-pdf-am install-ps install-ps-am \
-	install-ps install-ps-am install-strip installcheck \
+	install-strip installcheck installcheck-am installdirs \
-	installcheck-am installdirs installdirs-am maintainer-clean \
+	installdirs-am maintainer-clean maintainer-clean-generic \
-	maintainer-clean-generic mostlyclean mostlyclean-generic \
+	mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \
-	mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \
+	ps ps-am tags tags-am uninstall uninstall-am
-	uninstall uninstall-am
 
 
 # Tell versions [3.59,3.63) of GNU make to not export all variables.

apps/lighttpd-1.4.32/tests/docroot/www/expire/Makefile.in

@@ -1,9 +1,8 @@
-# Makefile.in generated by automake 1.11.6 from Makefile.am.
+# Makefile.in generated by automake 1.14.1 from Makefile.am.
 # @configure_input@
 
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# Copyright (C) 1994-2013 Free Software Foundation, Inc.
-# 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software
+
-# Foundation, Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -15,23 +14,51 @@
 
 @SET_MAKE@
 VPATH = @srcdir@
-am__make_dryrun = \
+am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
-  { \
+am__make_running_with_option = \
-    am__dry=no; \
+  case $${target_option-} in \
+      ?) ;; \
+      *) echo "am__make_running_with_option: internal error: invalid" \
+              "target option '$${target_option-}' specified" >&2; \
+         exit 1;; \
+  esac; \
+  has_opt=no; \
+  sane_makeflags=$$MAKEFLAGS; \
+  if $(am__is_gnu_make); then \
+    sane_makeflags=$$MFLAGS; \
+  else \
     case $$MAKEFLAGS in \
       *\\[\ \	]*) \
-        echo 'am--echo: ; @echo "AM"  OK' | $(MAKE) -f - 2>/dev/null \
+        bs=\\; \
-          | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
+        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
-      *) \
+          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
-        for am__flg in $$MAKEFLAGS; do \
-          case $$am__flg in \
-            *=*|--*) ;; \
-            *n*) am__dry=yes; break;; \
     esac; \
-        done;; \
+  fi; \
+  skip_next=no; \
+  strip_trailopt () \
+  { \
+    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+  }; \
+  for flg in $$sane_makeflags; do \
+    test $$skip_next = yes && { skip_next=no; continue; }; \
+    case $$flg in \
+      *=*|--*) continue;; \
+        -*I) strip_trailopt 'I'; skip_next=yes;; \
+      -*I?*) strip_trailopt 'I';; \
+        -*O) strip_trailopt 'O'; skip_next=yes;; \
+      -*O?*) strip_trailopt 'O';; \
+        -*l) strip_trailopt 'l'; skip_next=yes;; \
+      -*l?*) strip_trailopt 'l';; \
+      -[dEDm]) skip_next=yes;; \
+      -[JT]) skip_next=yes;; \
     esac; \
-    test $$am__dry = yes; \
+    case $$flg in \
-  }
+      *$$target_option*) has_opt=yes; break;; \
+    esac; \
+  done; \
+  test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
 pkgdatadir = $(datadir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
 pkglibdir = $(libdir)/@PACKAGE@
@@ -52,7 +79,7 @@ build_triplet = @build@
 host_triplet = @host@
 target_triplet = @target@
 subdir = tests/docroot/www/expire
-DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
+DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
 am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \
 	$(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
@@ -64,12 +91,18 @@ mkinstalldirs = $(install_sh) -d
 CONFIG_HEADER = $(top_builddir)/config.h
 CONFIG_CLEAN_FILES =
 CONFIG_CLEAN_VPATH_FILES =
+AM_V_P = $(am__v_P_@AM_V@)
+am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
+am__v_P_0 = false
+am__v_P_1 = :
 AM_V_GEN = $(am__v_GEN_@AM_V@)
 am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
 am__v_GEN_0 = @echo "  GEN     " $@;
+am__v_GEN_1 = 
 AM_V_at = $(am__v_at_@AM_V@)
 am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
 am__v_at_0 = @
+am__v_at_1 = 
 SOURCES =
 DIST_SOURCES =
 am__can_run_installinfo = \
@@ -77,6 +110,7 @@ am__can_run_installinfo = \
     n|no|NO) false;; \
     *) (install-info --version) >/dev/null 2>&1;; \
   esac
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
 ACLOCAL = @ACLOCAL@
 AMTAR = @AMTAR@
@@ -272,11 +306,11 @@ mostlyclean-libtool:
 
 clean-libtool:
 	-rm -rf .libs _libs
-tags: TAGS
+tags TAGS:
-TAGS:
 
-ctags: CTAGS
+ctags CTAGS:
-CTAGS:
+
+cscope cscopelist:
 
 
 distdir: $(DISTFILES)
@@ -412,15 +446,16 @@ uninstall-am:
 .MAKE: install-am install-strip
 
 .PHONY: all all-am check check-am clean clean-generic clean-libtool \
-	distclean distclean-generic distclean-libtool distdir dvi \
+	cscopelist-am ctags-am distclean distclean-generic \
-	dvi-am html html-am info info-am install install-am \
+	distclean-libtool distdir dvi dvi-am html html-am info info-am \
-	install-data install-data-am install-dvi install-dvi-am \
+	install install-am install-data install-data-am install-dvi \
-	install-exec install-exec-am install-html install-html-am \
+	install-dvi-am install-exec install-exec-am install-html \
-	install-info install-info-am install-man install-pdf \
+	install-html-am install-info install-info-am install-man \
-	install-pdf-am install-ps install-ps-am install-strip \
+	install-pdf install-pdf-am install-ps install-ps-am \
-	installcheck installcheck-am installdirs maintainer-clean \
+	install-strip installcheck installcheck-am installdirs \
-	maintainer-clean-generic mostlyclean mostlyclean-generic \
+	maintainer-clean maintainer-clean-generic mostlyclean \
-	mostlyclean-libtool pdf pdf-am ps ps-am uninstall uninstall-am
+	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
+	tags-am uninstall uninstall-am
 
 
 # Tell versions [3.59,3.63) of GNU make to not export all variables.

apps/lighttpd-1.4.32/tests/docroot/www/go/Makefile.in

@@ -1,9 +1,8 @@
-# Makefile.in generated by automake 1.11.6 from Makefile.am.
+# Makefile.in generated by automake 1.14.1 from Makefile.am.
 # @configure_input@
 
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# Copyright (C) 1994-2013 Free Software Foundation, Inc.
-# 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software
+
-# Foundation, Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -15,23 +14,51 @@
 
 @SET_MAKE@
 VPATH = @srcdir@
-am__make_dryrun = \
+am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
-  { \
+am__make_running_with_option = \
-    am__dry=no; \
+  case $${target_option-} in \
+      ?) ;; \
+      *) echo "am__make_running_with_option: internal error: invalid" \
+              "target option '$${target_option-}' specified" >&2; \
+         exit 1;; \
+  esac; \
+  has_opt=no; \
+  sane_makeflags=$$MAKEFLAGS; \
+  if $(am__is_gnu_make); then \
+    sane_makeflags=$$MFLAGS; \
+  else \
     case $$MAKEFLAGS in \
       *\\[\ \	]*) \
-        echo 'am--echo: ; @echo "AM"  OK' | $(MAKE) -f - 2>/dev/null \
+        bs=\\; \
-          | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
+        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
-      *) \
+          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
-        for am__flg in $$MAKEFLAGS; do \
-          case $$am__flg in \
-            *=*|--*) ;; \
-            *n*) am__dry=yes; break;; \
     esac; \
-        done;; \
+  fi; \
+  skip_next=no; \
+  strip_trailopt () \
+  { \
+    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+  }; \
+  for flg in $$sane_makeflags; do \
+    test $$skip_next = yes && { skip_next=no; continue; }; \
+    case $$flg in \
+      *=*|--*) continue;; \
+        -*I) strip_trailopt 'I'; skip_next=yes;; \
+      -*I?*) strip_trailopt 'I';; \
+        -*O) strip_trailopt 'O'; skip_next=yes;; \
+      -*O?*) strip_trailopt 'O';; \
+        -*l) strip_trailopt 'l'; skip_next=yes;; \
+      -*l?*) strip_trailopt 'l';; \
+      -[dEDm]) skip_next=yes;; \
+      -[JT]) skip_next=yes;; \
     esac; \
-    test $$am__dry = yes; \
+    case $$flg in \
-  }
+      *$$target_option*) has_opt=yes; break;; \
+    esac; \
+  done; \
+  test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
 pkgdatadir = $(datadir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
 pkglibdir = $(libdir)/@PACKAGE@
@@ -52,7 +79,7 @@ build_triplet = @build@
 host_triplet = @host@
 target_triplet = @target@
 subdir = tests/docroot/www/go
-DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
+DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
 am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \
 	$(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
@@ -64,12 +91,18 @@ mkinstalldirs = $(install_sh) -d
 CONFIG_HEADER = $(top_builddir)/config.h
 CONFIG_CLEAN_FILES =
 CONFIG_CLEAN_VPATH_FILES =
+AM_V_P = $(am__v_P_@AM_V@)
+am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
+am__v_P_0 = false
+am__v_P_1 = :
 AM_V_GEN = $(am__v_GEN_@AM_V@)
 am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
 am__v_GEN_0 = @echo "  GEN     " $@;
+am__v_GEN_1 = 
 AM_V_at = $(am__v_at_@AM_V@)
 am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
 am__v_at_0 = @
+am__v_at_1 = 
 SOURCES =
 DIST_SOURCES =
 am__can_run_installinfo = \
@@ -77,6 +110,7 @@ am__can_run_installinfo = \
     n|no|NO) false;; \
     *) (install-info --version) >/dev/null 2>&1;; \
   esac
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
 ACLOCAL = @ACLOCAL@
 AMTAR = @AMTAR@
@@ -272,11 +306,11 @@ mostlyclean-libtool:
 
 clean-libtool:
 	-rm -rf .libs _libs
-tags: TAGS
+tags TAGS:
-TAGS:
 
-ctags: CTAGS
+ctags CTAGS:
-CTAGS:
+
+cscope cscopelist:
 
 
 distdir: $(DISTFILES)
@@ -412,15 +446,16 @@ uninstall-am:
 .MAKE: install-am install-strip
 
 .PHONY: all all-am check check-am clean clean-generic clean-libtool \
-	distclean distclean-generic distclean-libtool distdir dvi \
+	cscopelist-am ctags-am distclean distclean-generic \
-	dvi-am html html-am info info-am install install-am \
+	distclean-libtool distdir dvi dvi-am html html-am info info-am \
-	install-data install-data-am install-dvi install-dvi-am \
+	install install-am install-data install-data-am install-dvi \
-	install-exec install-exec-am install-html install-html-am \
+	install-dvi-am install-exec install-exec-am install-html \
-	install-info install-info-am install-man install-pdf \
+	install-html-am install-info install-info-am install-man \
-	install-pdf-am install-ps install-ps-am install-strip \
+	install-pdf install-pdf-am install-ps install-ps-am \
-	installcheck installcheck-am installdirs maintainer-clean \
+	install-strip installcheck installcheck-am installdirs \
-	maintainer-clean-generic mostlyclean mostlyclean-generic \
+	maintainer-clean maintainer-clean-generic mostlyclean \
-	mostlyclean-libtool pdf pdf-am ps ps-am uninstall uninstall-am
+	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
+	tags-am uninstall uninstall-am
 
 
 # Tell versions [3.59,3.63) of GNU make to not export all variables.

apps/lighttpd-1.4.32/tests/docroot/www/indexfile/Makefile.in

@@ -1,9 +1,8 @@
-# Makefile.in generated by automake 1.11.6 from Makefile.am.
+# Makefile.in generated by automake 1.14.1 from Makefile.am.
 # @configure_input@
 
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# Copyright (C) 1994-2013 Free Software Foundation, Inc.
-# 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software
+
-# Foundation, Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -15,23 +14,51 @@
 
 @SET_MAKE@
 VPATH = @srcdir@
-am__make_dryrun = \
+am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
-  { \
+am__make_running_with_option = \
-    am__dry=no; \
+  case $${target_option-} in \
+      ?) ;; \
+      *) echo "am__make_running_with_option: internal error: invalid" \
+              "target option '$${target_option-}' specified" >&2; \
+         exit 1;; \
+  esac; \
+  has_opt=no; \
+  sane_makeflags=$$MAKEFLAGS; \
+  if $(am__is_gnu_make); then \
+    sane_makeflags=$$MFLAGS; \
+  else \
     case $$MAKEFLAGS in \
       *\\[\ \	]*) \
-        echo 'am--echo: ; @echo "AM"  OK' | $(MAKE) -f - 2>/dev/null \
+        bs=\\; \
-          | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
+        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
-      *) \
+          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
-        for am__flg in $$MAKEFLAGS; do \
-          case $$am__flg in \
-            *=*|--*) ;; \
-            *n*) am__dry=yes; break;; \
     esac; \
-        done;; \
+  fi; \
+  skip_next=no; \
+  strip_trailopt () \
+  { \
+    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+  }; \
+  for flg in $$sane_makeflags; do \
+    test $$skip_next = yes && { skip_next=no; continue; }; \
+    case $$flg in \
+      *=*|--*) continue;; \
+        -*I) strip_trailopt 'I'; skip_next=yes;; \
+      -*I?*) strip_trailopt 'I';; \
+        -*O) strip_trailopt 'O'; skip_next=yes;; \
+      -*O?*) strip_trailopt 'O';; \
+        -*l) strip_trailopt 'l'; skip_next=yes;; \
+      -*l?*) strip_trailopt 'l';; \
+      -[dEDm]) skip_next=yes;; \
+      -[JT]) skip_next=yes;; \
     esac; \
-    test $$am__dry = yes; \
+    case $$flg in \
-  }
+      *$$target_option*) has_opt=yes; break;; \
+    esac; \
+  done; \
+  test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
 pkgdatadir = $(datadir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
 pkglibdir = $(libdir)/@PACKAGE@
@@ -52,7 +79,7 @@ build_triplet = @build@
 host_triplet = @host@
 target_triplet = @target@
 subdir = tests/docroot/www/indexfile
-DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
+DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
 am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \
 	$(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
@@ -64,12 +91,18 @@ mkinstalldirs = $(install_sh) -d
 CONFIG_HEADER = $(top_builddir)/config.h
 CONFIG_CLEAN_FILES =
 CONFIG_CLEAN_VPATH_FILES =
+AM_V_P = $(am__v_P_@AM_V@)
+am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
+am__v_P_0 = false
+am__v_P_1 = :
 AM_V_GEN = $(am__v_GEN_@AM_V@)
 am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
 am__v_GEN_0 = @echo "  GEN     " $@;
+am__v_GEN_1 = 
 AM_V_at = $(am__v_at_@AM_V@)
 am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
 am__v_at_0 = @
+am__v_at_1 = 
 SOURCES =
 DIST_SOURCES =
 am__can_run_installinfo = \
@@ -77,6 +110,7 @@ am__can_run_installinfo = \
     n|no|NO) false;; \
     *) (install-info --version) >/dev/null 2>&1;; \
   esac
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
 ACLOCAL = @ACLOCAL@
 AMTAR = @AMTAR@
@@ -272,11 +306,11 @@ mostlyclean-libtool:
 
 clean-libtool:
 	-rm -rf .libs _libs
-tags: TAGS
+tags TAGS:
-TAGS:
 
-ctags: CTAGS
+ctags CTAGS:
-CTAGS:
+
+cscope cscopelist:
 
 
 distdir: $(DISTFILES)
@@ -412,15 +446,16 @@ uninstall-am:
 .MAKE: install-am install-strip
 
 .PHONY: all all-am check check-am clean clean-generic clean-libtool \
-	distclean distclean-generic distclean-libtool distdir dvi \
+	cscopelist-am ctags-am distclean distclean-generic \
-	dvi-am html html-am info info-am install install-am \
+	distclean-libtool distdir dvi dvi-am html html-am info info-am \
-	install-data install-data-am install-dvi install-dvi-am \
+	install install-am install-data install-data-am install-dvi \
-	install-exec install-exec-am install-html install-html-am \
+	install-dvi-am install-exec install-exec-am install-html \
-	install-info install-info-am install-man install-pdf \
+	install-html-am install-info install-info-am install-man \
-	install-pdf-am install-ps install-ps-am install-strip \
+	install-pdf install-pdf-am install-ps install-ps-am \
-	installcheck installcheck-am installdirs maintainer-clean \
+	install-strip installcheck installcheck-am installdirs \
-	maintainer-clean-generic mostlyclean mostlyclean-generic \
+	maintainer-clean maintainer-clean-generic mostlyclean \
-	mostlyclean-libtool pdf pdf-am ps ps-am uninstall uninstall-am
+	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
+	tags-am uninstall uninstall-am
 
 
 # Tell versions [3.59,3.63) of GNU make to not export all variables.

config/affinity-netmap.py

@@ -0,0 +1,38 @@
+#!/usr/bin/env python
+#### -NOTE- This script only works for ixgbe driver ####
+
+import os
+import sys
+import subprocess
+
+def execute(cmd):
+	try:
+		proc = subprocess.Popen(cmd, shell = True, stdout = subprocess.PIPE)
+		return proc.communicate()[0]
+	except:
+		pass
+		return None
+
+if os.getuid() != 0:
+	print 'You must be root!'
+	sys.exit(1)
+
+num_cpus = len(execute('cat /proc/cpuinfo | grep processor').strip().split('\n'))
+
+if len(sys.argv) < 2:
+	print 'usage: %s <interface name>' % sys.argv[0]
+	sys.exit(1)
+
+ifname = sys.argv[1]
+
+intrmap = execute('cat /proc/interrupts | grep %s-TxRx-' % ifname).strip().split('\n')
+	
+for intr in intrmap:
+	irq = int(intr.split()[0][:-1])
+	name = intr.split()[-1]
+	queue = int(name[name.rfind('-') + 1:])
+
+	cpu = queue
+
+	print 'echo %x > /proc/irq/%d/smp_affinity' % (1 << cpu, irq)
+	execute('echo %x > /proc/irq/%d/smp_affinity' % (1 << cpu, irq))

dpdk-16.04/mk/rte.app.mk

@@ -207,6 +207,8 @@ else
 O_TO_EXE = $(LD) $(LDFLAGS) $(LDFLAGS_$(@)) $(EXTRA_LDFLAGS) \
 	-Map=$(@).map --cref -o $@ $(OBJS-y) $(LDLIBS)
 endif
+LINKER_FLAGS = $(call linkerprefix,$(LDLIBS))
+$(shell echo ${LINKER_FLAGS} > ${RTE_SDK}/${RTE_TARGET}/lib/ldflags.txt)
 O_TO_EXE_STR = $(subst ','\'',$(O_TO_EXE)) #'# fix syntax highlight
 O_TO_EXE_DISP = $(if $(V),"$(O_TO_EXE_STR)","  LD $(@)")
 O_TO_EXE_CMD = "cmd_$@ = $(O_TO_EXE_STR)"

mtcp/src/netmap_module.c

@@ -19,6 +19,9 @@
 #define ETHERNET_FRAME_SIZE		1514
 #define MAX_IFNAMELEN			(IF_NAMESIZE + 10)
 #define EXTRA_BUFS			512
+#define IDLE_POLL_WAIT			1 /* msecs */
+#define IDLE_POLL_COUNT			10
+//#define CONST_POLLING			1
 /*----------------------------------------------------------------------------*/
 
 struct netmap_private_context {
@@ -27,7 +30,8 @@ struct netmap_private_context {
 	unsigned char *rcv_pktbuf[MAX_PKT_BURST];
 	uint16_t rcv_pkt_len[MAX_PKT_BURST];
 	uint16_t snd_pkt_size[MAX_DEVICES];
-	uint8_t dev_poll_flag;
+	uint8_t dev_poll_flag[MAX_DEVICES];
+	uint8_t idle_poll_count; 
 } __attribute__((aligned(__WORDSIZE)));
 /*----------------------------------------------------------------------------*/
 void
@@ -48,8 +52,6 @@ netmap_init_handle(struct mtcp_thread_context *ctxt)
 	
 	npc = (struct netmap_private_context *)ctxt->io_private_context;
 
-	npc->dev_poll_flag = 1;
-
 	/* initialize per-thread netmap interfaces  */
 	for (j = 0; j < num_devices_attached; j++) {
 		if (if_indextoname(devices_attached[j], ifname) == NULL) {
@@ -120,13 +122,14 @@ netmap_send_pkts(struct mtcp_thread_context *ctxt, int nif)
 	if (nm_inject(npc->local_nmd[idx], npc->snd_pktbuf[idx], pkt_size) == 0) {
 		TRACE_DBG("Failed to send pkt of size %d on interface: %d\n",
 			  pkt_size, idx);
-#ifdef NETSTAT
+
-		mtcp->nstat.rx_errors[idx]++;
-#endif
 		ioctl(npc->local_nmd[idx]->fd, NIOCTXSYNC, NULL);
-		//goto tx_again;
+		goto tx_again;
 	}
 	
+#ifdef NETSTAT
+	//	mtcp->nstat.rx_errors[idx]++;
+#endif
 	npc->snd_pkt_size[idx] = 0;
 	
 	return 1;
@@ -162,7 +165,7 @@ netmap_recv_pkts(struct mtcp_thread_context *ctxt, int ifidx)
 
 
 
-	for (c = 0; c < n && cnt != got; c++) {
+	for (c = 0; c < n && cnt != got && npc->dev_poll_flag[ifidx]; c++) {
 		/* compute current ring to use */
 		struct netmap_ring *ring;
 		
@@ -181,6 +184,8 @@ netmap_recv_pkts(struct mtcp_thread_context *ctxt, int ifidx)
 	}
 	d->cur_rx_ring = ri;
 
+	npc->dev_poll_flag[ifidx] = 0;
+
 	return p;
 }
 /*----------------------------------------------------------------------------*/
@@ -197,26 +202,34 @@ netmap_get_rptr(struct mtcp_thread_context *ctxt, int ifidx, int index, uint16_t
 int32_t
 netmap_select(struct mtcp_thread_context *ctxt)
 {
+	int i, rc;
+	struct pollfd pfd[MAX_DEVICES];
 	struct netmap_private_context *npc = 
 		(struct netmap_private_context *)ctxt->io_private_context;
 	
-	if (npc->local_nmd[0] == NULL)	return -1;
+	/* see if num_devices have been registered */
-	struct pollfd pfd = { .fd = npc->local_nmd[0]->fd, .events = POLLIN };
+	if (npc->local_nmd[0] == NULL)
+		return -1;
 
-	do { 
+	for (i = 0; i < num_devices_attached; i++) {
-		int i = poll(&pfd, 1, 1000);
+		pfd[i].fd = npc->local_nmd[i]->fd;
-		if (i > 0 && !(pfd.revents & POLLERR)) {
+		pfd[i].events = POLLIN;
-			npc->dev_poll_flag = 1;
-			break;
-		}
-	} while (npc->dev_poll_flag == 0);
-	
-	if (pfd.revents & POLLERR) {
-		TRACE_ERROR("Poll failed! (cpu: %d\n, err: %d)\n",
-			    ctxt->cpu, errno);
-		exit(EXIT_FAILURE);
 	}
 
+#ifndef CONST_POLLING	
+	if (npc->idle_poll_count >= IDLE_POLL_COUNT) {
+		rc = poll(pfd, num_devices_attached, IDLE_POLL_WAIT);
+	} else
+#endif
+		{
+			rc = poll(pfd, num_devices_attached, 0);
+		}
+
+	npc->idle_poll_count = (rc == 0) ? (npc->idle_poll_count + 1) : 0;
+
+	for (i = 0; rc > 0 && i < num_devices_attached; i++)
+		if (!(pfd[i].revents & (POLLERR)))
+			npc->dev_poll_flag[i] = 1;
 	return 0;
 }
 /*----------------------------------------------------------------------------*/