pve-qemu/debian/patches/extra/0001-monitor-qmp-fix-race-w...

207 lines
7.2 KiB
Diff
Raw Normal View History

From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
From: Stefan Reiter <s.reiter@proxmox.com>
Date: Mon, 23 Aug 2021 11:28:32 +0200
Subject: [PATCH] monitor/qmp: fix race with clients disconnecting early
The following sequence can produce a race condition that results in
responses meant for different clients being sent to the wrong one:
(QMP, no OOB)
1) client A connects
2) client A sends 'qmp_capabilities'
3) 'qmp_dispatch' runs in coroutine, schedules out to
'do_qmp_dispatch_bh' and yields
4) client A disconnects (i.e. aborts, crashes, etc...)
5) client B connects
6) 'do_qmp_dispatch_bh' runs 'qmp_capabilities' and wakes calling coroutine
7) capabilities are now set and 'mon->commands' is set to '&qmp_commands'
8) 'qmp_dispatch' returns to 'monitor_qmp_dispatch'
9) success message is sent to client B *without it ever having sent
'qmp_capabilities' itself*
9a) even if client B ignores it, it will now presumably send it's own
greeting, which will error because caps are already set
The fix proposed here uses an atomic, sequential connection number
stored in the MonitorQMP struct, which is incremented everytime a new
client connects. Since it is not changed on CHR_EVENT_CLOSED, the
behaviour of allowing a client to disconnect only one side of the
connection is retained.
The connection_nr needs to be exposed outside of the monitor subsystem,
since qmp_dispatch lives in qapi code. It needs to be checked twice,
once for actually running the command in the BH (fixes 7), and once for
sending back a response (fixes 9).
This satisfies my local reproducer - using multiple clients constantly
looping to open a connection, send the greeting, then exiting no longer
crashes other, normally behaving clients with unrelated responses.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
---
include/monitor/monitor.h | 1 +
monitor/monitor-internal.h | 7 +++++++
monitor/monitor.c | 15 +++++++++++++++
monitor/qmp.c | 15 ++++++++++++++-
qapi/qmp-dispatch.c | 21 +++++++++++++++++----
stubs/monitor-core.c | 5 +++++
6 files changed, 59 insertions(+), 5 deletions(-)
diff --git a/include/monitor/monitor.h b/include/monitor/monitor.h
update submodule and patches to QEMU 8.0.0 Many changes were necessary this time around: * QAPI was changed to avoid redundant has_* variables, see commit 44ea9d9be3 ("qapi: Start to elide redundant has_FOO in generated C") for details. This affected many QMP commands added by Proxmox too. * Pending querying for migration got split into two functions, one to estimate, one for exact value, see commit c8df4a7aef ("migration: Split save_live_pending() into state_pending_*") for details. Relevant for savevm-async and PBS dirty bitmap. * Some block (driver) functions got converted to coroutines, so the Proxmox block drivers needed to be adapted. * Alloc track auto-detaching during PBS live restore got broken by AioContext-related changes resulting in a deadlock. The current, hacky method was replaced by a simpler one. Stefan apparently ran into a problem with that when he wrote the driver, but there were improvements in the stream job code since then and I didn't manage to reproduce the issue. It's a separate patch "alloc-track: fix deadlock during drop" for now, you can find the details there. * Async snapshot-related changes: - The pending querying got adapted to the above-mentioned split and a patch is added to optimize it/make it more similar to what upstream code does. - Added initialization of the compression counters (for future-proofing). - It's necessary the hold the BQL (big QEMU lock = iothread mutex) during the setup phase, because block layer functions are used there and not doing so leads to racy, hard-to-debug crashes or hangs. It's necessary to change some upstream code too for this, a version of the patch "migration: for snapshots, hold the BQL during setup callbacks" is intended to be upstreamed. - Need to take the bdrv graph read lock before flushing. * hmp_info_balloon was moved to a different file. * Needed to include a new headers from time to time to still get the correct functions. Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
2023-05-15 16:39:53 +03:00
index 033390f699..ad35d4fea8 100644
--- a/include/monitor/monitor.h
+++ b/include/monitor/monitor.h
@@ -16,6 +16,7 @@ extern QemuOptsList qemu_mon_opts;
Monitor *monitor_cur(void);
Monitor *monitor_set_cur(Coroutine *co, Monitor *mon);
bool monitor_cur_is_qmp(void);
+int monitor_get_connection_nr(const Monitor *mon);
void monitor_init_globals(void);
void monitor_init_globals_core(void);
diff --git a/monitor/monitor-internal.h b/monitor/monitor-internal.h
update submodule and patches to QEMU 8.0.0 Many changes were necessary this time around: * QAPI was changed to avoid redundant has_* variables, see commit 44ea9d9be3 ("qapi: Start to elide redundant has_FOO in generated C") for details. This affected many QMP commands added by Proxmox too. * Pending querying for migration got split into two functions, one to estimate, one for exact value, see commit c8df4a7aef ("migration: Split save_live_pending() into state_pending_*") for details. Relevant for savevm-async and PBS dirty bitmap. * Some block (driver) functions got converted to coroutines, so the Proxmox block drivers needed to be adapted. * Alloc track auto-detaching during PBS live restore got broken by AioContext-related changes resulting in a deadlock. The current, hacky method was replaced by a simpler one. Stefan apparently ran into a problem with that when he wrote the driver, but there were improvements in the stream job code since then and I didn't manage to reproduce the issue. It's a separate patch "alloc-track: fix deadlock during drop" for now, you can find the details there. * Async snapshot-related changes: - The pending querying got adapted to the above-mentioned split and a patch is added to optimize it/make it more similar to what upstream code does. - Added initialization of the compression counters (for future-proofing). - It's necessary the hold the BQL (big QEMU lock = iothread mutex) during the setup phase, because block layer functions are used there and not doing so leads to racy, hard-to-debug crashes or hangs. It's necessary to change some upstream code too for this, a version of the patch "migration: for snapshots, hold the BQL during setup callbacks" is intended to be upstreamed. - Need to take the bdrv graph read lock before flushing. * hmp_info_balloon was moved to a different file. * Needed to include a new headers from time to time to still get the correct functions. Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
2023-05-15 16:39:53 +03:00
index 53e3808054..a19f8cbc2b 100644
--- a/monitor/monitor-internal.h
+++ b/monitor/monitor-internal.h
@@ -152,6 +152,13 @@ typedef struct {
QemuMutex qmp_queue_lock;
/* Input queue that holds all the parsed QMP requests */
GQueue *qmp_requests;
+
+ /*
+ * A sequential number that gets incremented on every new CHR_EVENT_OPENED.
+ * Used to avoid leftover responses in BHs from being sent to the wrong
+ * client. Access with atomics.
+ */
+ int connection_nr;
} MonitorQMP;
/**
diff --git a/monitor/monitor.c b/monitor/monitor.c
update submodule and patches to QEMU 8.0.0 Many changes were necessary this time around: * QAPI was changed to avoid redundant has_* variables, see commit 44ea9d9be3 ("qapi: Start to elide redundant has_FOO in generated C") for details. This affected many QMP commands added by Proxmox too. * Pending querying for migration got split into two functions, one to estimate, one for exact value, see commit c8df4a7aef ("migration: Split save_live_pending() into state_pending_*") for details. Relevant for savevm-async and PBS dirty bitmap. * Some block (driver) functions got converted to coroutines, so the Proxmox block drivers needed to be adapted. * Alloc track auto-detaching during PBS live restore got broken by AioContext-related changes resulting in a deadlock. The current, hacky method was replaced by a simpler one. Stefan apparently ran into a problem with that when he wrote the driver, but there were improvements in the stream job code since then and I didn't manage to reproduce the issue. It's a separate patch "alloc-track: fix deadlock during drop" for now, you can find the details there. * Async snapshot-related changes: - The pending querying got adapted to the above-mentioned split and a patch is added to optimize it/make it more similar to what upstream code does. - Added initialization of the compression counters (for future-proofing). - It's necessary the hold the BQL (big QEMU lock = iothread mutex) during the setup phase, because block layer functions are used there and not doing so leads to racy, hard-to-debug crashes or hangs. It's necessary to change some upstream code too for this, a version of the patch "migration: for snapshots, hold the BQL during setup callbacks" is intended to be upstreamed. - Need to take the bdrv graph read lock before flushing. * hmp_info_balloon was moved to a different file. * Needed to include a new headers from time to time to still get the correct functions. Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
2023-05-15 16:39:53 +03:00
index 8dc96f6af9..f3c38cb714 100644
--- a/monitor/monitor.c
+++ b/monitor/monitor.c
@@ -135,6 +135,21 @@ bool monitor_cur_is_qmp(void)
return cur_mon && monitor_is_qmp(cur_mon);
}
+/**
+ * If @mon is a QMP monitor, return the connection_nr, otherwise -1.
+ */
+int monitor_get_connection_nr(const Monitor *mon)
+{
+ MonitorQMP *qmp_mon;
+
+ if (!monitor_is_qmp(mon)) {
+ return -1;
+ }
+
+ qmp_mon = container_of(mon, MonitorQMP, common);
+ return qatomic_read(&qmp_mon->connection_nr);
+}
+
/**
* Is @mon is using readline?
* Note: not all HMP monitors use readline, e.g., gdbserver has a
diff --git a/monitor/qmp.c b/monitor/qmp.c
index 092c527b6f..6b8cfcf6d8 100644
--- a/monitor/qmp.c
+++ b/monitor/qmp.c
@@ -141,6 +141,8 @@ static void monitor_qmp_dispatch(MonitorQMP *mon, QObject *req)
QDict *rsp;
QDict *error;
+ int conn_nr_before = qatomic_read(&mon->connection_nr);
+
rsp = qmp_dispatch(mon->commands, req, qmp_oob_enabled(mon),
&mon->common);
@@ -156,7 +158,17 @@ static void monitor_qmp_dispatch(MonitorQMP *mon, QObject *req)
}
}
- monitor_qmp_respond(mon, rsp);
+ /*
+ * qmp_dispatch might have yielded and waited for a BH, in which case there
+ * is a chance a new client connected in the meantime - if this happened,
+ * the command will not have been executed, but we also need to ensure that
+ * we don't send back a corresponding response on a line that no longer
+ * belongs to this request.
+ */
+ if (conn_nr_before == qatomic_read(&mon->connection_nr)) {
+ monitor_qmp_respond(mon, rsp);
+ }
+
qobject_unref(rsp);
}
@@ -444,6 +456,7 @@ static void monitor_qmp_event(void *opaque, QEMUChrEvent event)
switch (event) {
case CHR_EVENT_OPENED:
+ qatomic_inc_fetch(&mon->connection_nr);
mon->commands = &qmp_cap_negotiation_commands;
monitor_qmp_caps_reset(mon);
data = qmp_greeting(mon);
diff --git a/qapi/qmp-dispatch.c b/qapi/qmp-dispatch.c
index 0990873ec8..e605003771 100644
--- a/qapi/qmp-dispatch.c
+++ b/qapi/qmp-dispatch.c
@@ -117,16 +117,28 @@ typedef struct QmpDispatchBH {
QObject **ret;
Error **errp;
Coroutine *co;
+ int conn_nr;
} QmpDispatchBH;
static void do_qmp_dispatch_bh(void *opaque)
{
QmpDispatchBH *data = opaque;
- assert(monitor_cur() == NULL);
- monitor_set_cur(qemu_coroutine_self(), data->cur_mon);
- data->cmd->fn(data->args, data->ret, data->errp);
- monitor_set_cur(qemu_coroutine_self(), NULL);
+ /*
+ * A QMP monitor tracks it's client with a connection number, if this
+ * changes during the scheduling delay of this BH, we must not execute the
+ * command. Otherwise a badly placed 'qmp_capabilities' might affect the
+ * connection state of a client it was never meant for.
+ */
+ if (data->conn_nr == monitor_get_connection_nr(data->cur_mon)) {
+ assert(monitor_cur() == NULL);
+ monitor_set_cur(qemu_coroutine_self(), data->cur_mon);
+ data->cmd->fn(data->args, data->ret, data->errp);
+ monitor_set_cur(qemu_coroutine_self(), NULL);
+ } else {
+ error_setg(data->errp, "active monitor connection changed");
+ }
+
aio_co_wake(data->co);
}
@@ -231,6 +243,7 @@ QDict *qmp_dispatch(const QmpCommandList *cmds, QObject *request,
.ret = &ret,
.errp = &err,
.co = qemu_coroutine_self(),
+ .conn_nr = monitor_get_connection_nr(cur_mon),
};
aio_bh_schedule_oneshot(qemu_get_aio_context(), do_qmp_dispatch_bh,
&data);
diff --git a/stubs/monitor-core.c b/stubs/monitor-core.c
update submodule and patches to 7.1.0 Notable changes: * The only big change is the switch to using a custom QIOChannel for savevm-async, because the previously used QEMUFileOps was dropped. Changes to the current implementation: * Switch to vector based methods as required for an IO channel. For short reads the passed-in IO vector is stuffed with zeroes at the end, just to be sure. * For reading: The documentation in include/io/channel.h states that at least one byte should be read, so also error out when whe are at the very end instead of returning 0. * For reading: Fix off-by-one error when request goes beyond end. The wrong code piece was: if ((pos + size) > maxlen) { size = maxlen - pos - 1; } Previously, the last byte would not be read. It's actually possible to get a snapshot .raw file that has content all the way up the final 512 byte (= BDRV_SECTOR_SIZE) boundary without any trailing zero bytes (I wrote a script to do it). Luckily, it didn't cause a real issue, because qemu_loadvm_state() is not interested in the final (i.e. QEMU_VM_VMDESCRIPTION) section. The buffer for reading it is simply freed up afterwards and the function will assume that it read the whole section, even if that's not the case. * For writing: Make use of the generated blk_pwritev() wrapper instead of manually wrapping the coroutine to simplify and save a few lines. * Adapt to changed interfaces for blk_{pread,pwrite}: * a9262f551e ("block: Change blk_{pread,pwrite}() param order") * 3b35d4542c ("block: Add a 'flags' param to blk_pread()") * bf5b16fa40 ("block: Make blk_{pread,pwrite}() return 0 on success") Those changes especially affected the qemu-img dd patches, because the context also changed, but also some of our block drivers used the functions. * Drop qemu-common.h include: it got renamed after essentially everything was moved to other headers. The only remaining user I could find for things dropped from the header between 7.0 and 7.1 was qemu_get_vm_name() in the iscsi-initiatorname patch, but it already includes the header to which the function was moved. Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
2022-10-14 15:07:13 +03:00
index afa477aae6..d3ff124bf3 100644
--- a/stubs/monitor-core.c
+++ b/stubs/monitor-core.c
update submodule and patches to 7.1.0 Notable changes: * The only big change is the switch to using a custom QIOChannel for savevm-async, because the previously used QEMUFileOps was dropped. Changes to the current implementation: * Switch to vector based methods as required for an IO channel. For short reads the passed-in IO vector is stuffed with zeroes at the end, just to be sure. * For reading: The documentation in include/io/channel.h states that at least one byte should be read, so also error out when whe are at the very end instead of returning 0. * For reading: Fix off-by-one error when request goes beyond end. The wrong code piece was: if ((pos + size) > maxlen) { size = maxlen - pos - 1; } Previously, the last byte would not be read. It's actually possible to get a snapshot .raw file that has content all the way up the final 512 byte (= BDRV_SECTOR_SIZE) boundary without any trailing zero bytes (I wrote a script to do it). Luckily, it didn't cause a real issue, because qemu_loadvm_state() is not interested in the final (i.e. QEMU_VM_VMDESCRIPTION) section. The buffer for reading it is simply freed up afterwards and the function will assume that it read the whole section, even if that's not the case. * For writing: Make use of the generated blk_pwritev() wrapper instead of manually wrapping the coroutine to simplify and save a few lines. * Adapt to changed interfaces for blk_{pread,pwrite}: * a9262f551e ("block: Change blk_{pread,pwrite}() param order") * 3b35d4542c ("block: Add a 'flags' param to blk_pread()") * bf5b16fa40 ("block: Make blk_{pread,pwrite}() return 0 on success") Those changes especially affected the qemu-img dd patches, because the context also changed, but also some of our block drivers used the functions. * Drop qemu-common.h include: it got renamed after essentially everything was moved to other headers. The only remaining user I could find for things dropped from the header between 7.0 and 7.1 was qemu_get_vm_name() in the iscsi-initiatorname patch, but it already includes the header to which the function was moved. Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
2022-10-14 15:07:13 +03:00
@@ -12,6 +12,11 @@ Monitor *monitor_set_cur(Coroutine *co, Monitor *mon)
return NULL;
}
+int monitor_get_connection_nr(const Monitor *mon)
+{
+ return -1;
+}
+
void monitor_init_qmp(Chardev *chr, bool pretty, Error **errp)
{
}