vitalif
/
pve-qemu
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
pve-qemu/debian/patches/series

64 lines
3.8 KiB
Plaintext
Raw Normal View History

update submodule and patches to 6.1.1 Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
2022-01-13 12:34:33 +03:00
extra/0001-monitor-qmp-fix-race-with-clients-disconnecting-earl.patch
update reentrancy patches to version in upstream git The previous version was picked from the mailing list and still had an object_dynamic_cast call in a hot path, which is avoided with the version that landed in git. Also adds a few more exceptions for devices that need reentrancy. Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
2023-06-06 11:58:50 +03:00
extra/0002-scsi-megasas-Internal-cdbs-have-16-byte-length.patch
extra/0003-ide-avoid-potential-deadlock-when-draining-during-tr.patch
extra/0004-ui-return-NULL-when-getting-cursor-without-a-console.patch
extra/0005-memory-prevent-dma-reentracy-issues.patch
update submodule and patches to QEMU 8.0.0 Many changes were necessary this time around: * QAPI was changed to avoid redundant has_* variables, see commit 44ea9d9be3 ("qapi: Start to elide redundant has_FOO in generated C") for details. This affected many QMP commands added by Proxmox too. * Pending querying for migration got split into two functions, one to estimate, one for exact value, see commit c8df4a7aef ("migration: Split save_live_pending() into state_pending_*") for details. Relevant for savevm-async and PBS dirty bitmap. * Some block (driver) functions got converted to coroutines, so the Proxmox block drivers needed to be adapted. * Alloc track auto-detaching during PBS live restore got broken by AioContext-related changes resulting in a deadlock. The current, hacky method was replaced by a simpler one. Stefan apparently ran into a problem with that when he wrote the driver, but there were improvements in the stream job code since then and I didn't manage to reproduce the issue. It's a separate patch "alloc-track: fix deadlock during drop" for now, you can find the details there. * Async snapshot-related changes: - The pending querying got adapted to the above-mentioned split and a patch is added to optimize it/make it more similar to what upstream code does. - Added initialization of the compression counters (for future-proofing). - It's necessary the hold the BQL (big QEMU lock = iothread mutex) during the setup phase, because block layer functions are used there and not doing so leads to racy, hard-to-debug crashes or hangs. It's necessary to change some upstream code too for this, a version of the patch "migration: for snapshots, hold the BQL during setup callbacks" is intended to be upstreamed. - Need to take the bdrv graph read lock before flushing. * hmp_info_balloon was moved to a different file. * Needed to include a new headers from time to time to still get the correct functions. Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
2023-05-15 16:39:53 +03:00
extra/0006-lsi53c895a-disable-reentrancy-detection-for-script-R.patch
update reentrancy patches to version in upstream git The previous version was picked from the mailing list and still had an object_dynamic_cast call in a hot path, which is avoided with the version that landed in git. Also adds a few more exceptions for devices that need reentrancy. Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
2023-06-06 11:58:50 +03:00
extra/0007-bcm2835_property-disable-reentrancy-detection-for-io.patch
extra/0008-raven-disable-reentrancy-detection-for-iomem.patch
extra/0009-apic-disable-reentrancy-detection-for-apic-msi.patch
add patch fixing resume for snapshot and hibernate with drive with iothread and a dirty bitmap Not difficult to run into, just have a drive with iothread, take a PBS backup and then take a snapshot or hibernate. Resuming will fail with > qemu: qemu_mutex_unlock_impl: Operation not permitted because of not acquiring the correct AioContext first. Migration is not affected, because it runs in coroutine context. Reported in the community forum: https://forum.proxmox.com/threads/129899/ Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
2023-07-28 12:44:57 +03:00
extra/0010-migration-block-dirty-bitmap-fix-loading-bitmap-when.patch
add patch fixing fd leak for vhost Each pause+resume operation (which is also done as part of taking a VM snapshot) would increase the number of open file descriptors by the number of vhost devices (e.g. network devices by default). This could lead to crashes during backup and surely other issues once the system limit (default 1024) was reached [0]. [0]: https://forum.proxmox.com/threads/131603/ Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
2023-08-03 16:56:30 +03:00
extra/0011-vhost-fix-the-fd-leak.patch
fix #2874: SATA: avoid unsolicited write to sector 0 during reset If there is a pending DMA operation during ide_bus_reset(), the fact that the IDEstate is already reset before the operation is canceled can be problematic. In particular, ide_dma_cb() might be called and then use the reset IDEstate which contains the signature after the reset. When used to construct the IO operation this leads to ide_get_sector() returning 0 and nsector being 1. This is particularly bad, because a write command will thus destroy the first sector which often contains a partition table or similar. Upstream discussion: https://lists.nongnu.org/archive/html/qemu-devel/2023-08/msg04239.html Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
2023-08-24 16:51:11 +03:00
extra/0012-hw-ide-reset-cancel-async-DMA-operation-before-reset.patch
move bitmap-mirror patches to seperate folder ...instead of having them in the middle of the backup related patches. These might (hopefully) become upstream at some point as well. Signed-off-by: Stefan Reiter <s.reiter@proxmox.com> Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
2021-03-03 12:56:03 +03:00
bitmap-mirror/0001-drive-mirror-add-support-for-sync-bitmap-mode-never.patch
bitmap-mirror/0002-drive-mirror-add-support-for-conditional-and-always-.patch
bitmap-mirror/0003-mirror-add-check-for-bitmap-mode-without-bitmap.patch
bitmap-mirror/0004-mirror-switch-to-bdrv_dirty_bitmap_merge_internal.patch
bitmap-mirror/0005-iotests-add-test-for-bitmap-mirror.patch
bitmap-mirror/0006-mirror-move-some-checks-to-qmp.patch
bump version to 3.0.0-1 Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
2018-08-30 16:00:07 +03:00
pve/0001-PVE-Config-block-file-change-locking-default-to-off.patch
pve/0002-PVE-Config-Adjust-network-script-path-to-etc-kvm.patch
update patches for v4.0.0 Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
2019-06-06 13:58:15 +03:00
pve/0003-PVE-Config-set-the-CPU-model-to-kvm64-32-instead-of-.patch
pve/0004-PVE-Config-ui-spice-default-to-pve-certificates.patch
drop patch force-disabling smm This drops debian/patches/pve/0005-PVE-Config-smm_available-false.patch (and renumbers the remaining patches) From what I could gather, this patch was originally added due to issues with old kernels. Now we have users which seem to run into issues *with* the patch. All this does is toggle an option, and it's available via a qemu CLI option anyway, so if dropping this patch causes issues for some people we can just add an option to qemu-server & UI control smm explicitly. Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com> Cc: Alexandre Derumier <aderumier@odiso.com> Tested-by: Stefan Reiter <s.reiter@proxmox.com>
2021-08-10 10:55:11 +03:00
pve/0005-PVE-Config-glusterfs-no-default-logfile-if-daemonize.patch
pve/0006-PVE-Config-rbd-block-rbd-disable-rbd_cache_writethro.patch
drop patch for custom get_link_status QMP command There doesn't seem to be any Proxmox VE code using this. Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
2023-05-24 16:56:52 +03:00
pve/0007-PVE-Up-glusterfs-allow-partial-reads.patch
pve/0008-PVE-Up-qemu-img-return-success-on-info-without-snaps.patch
pve/0009-PVE-Up-qemu-img-dd-add-osize-and-read-from-to-stdin-.patch
pve/0010-PVE-Up-qemu-img-dd-add-isize-parameter.patch
pve/0011-PVE-Up-qemu-img-dd-add-n-skip_create.patch
pve/0012-qemu-img-dd-add-l-option-for-loading-a-snapshot.patch
pve/0013-PVE-virtio-balloon-improve-query-balloon.patch
pve/0014-PVE-qapi-modify-query-machines.patch
pve/0015-PVE-qapi-modify-spice-query.patch
pve/0016-PVE-add-IOChannel-implementation-for-savevm-async.patch
pve/0017-PVE-add-savevm-async-for-background-state-snapshots.patch
pve/0018-PVE-add-optional-buffer-size-to-QEMUFile.patch
pve/0019-PVE-block-add-the-zeroinit-block-driver-filter.patch
pve/0020-PVE-Add-dummy-id-command-line-parameter.patch
pve/0021-PVE-Config-Revert-target-i386-disable-LINT0-after-re.patch
pve/0022-PVE-Up-Config-file-posix-make-locking-optiono-on-cre.patch
pve/0023-PVE-monitor-disable-oob-capability.patch
pve/0024-PVE-Compat-4.0-used-balloon-qemu-4-0-config-size-fal.patch
pve/0025-PVE-Allow-version-code-in-machine-type.patch
pve/0026-block-backup-move-bcs-bitmap-initialization-to-job-c.patch
pve/0027-PVE-Backup-add-vma-backup-format-code.patch
pve/0028-PVE-Backup-add-backup-dump-block-driver.patch
pve/0029-PVE-Add-sequential-job-transaction-support.patch
pve/0030-PVE-Backup-Proxmox-backup-patches-for-QEMU.patch
pve/0031-PVE-Backup-pbs-restore-new-command-to-restore-from-p.patch
pve/0032-PVE-Add-PBS-block-driver-to-map-backup-archives-into.patch
pve/0033-PVE-redirect-stderr-to-journal-when-daemonized.patch
pve/0034-PVE-Migrate-dirty-bitmap-state-via-savevm.patch
pve/0035-migration-block-dirty-bitmap-migrate-other-bitmaps-e.patch
pve/0036-PVE-fall-back-to-open-iscsi-initiatorname.patch
pve/0037-PVE-block-stream-increase-chunk-size.patch
pve/0038-block-io-accept-NULL-qiov-in-bdrv_pad_request.patch
pve/0039-block-add-alloc-track-driver.patch
pve/0040-Revert-block-rbd-workaround-for-ceph-issue-53784.patch
pve/0041-Revert-block-rbd-fix-handling-of-holes-in-.bdrv_co_b.patch
pve/0042-Revert-block-rbd-implement-bdrv_co_block_status.patch
pve/0043-alloc-track-fix-deadlock-during-drop.patch
pve/0044-migration-for-snapshots-hold-the-BQL-during-setup-ca.patch
pve/0045-savevm-async-don-t-hold-BQL-during-setup.patch