Biggest change is that AioContext locking got removed, but no changes
required other than dropping the calls to acquire and release it. As a
consequence, the single parameter for the bdrv_graph_wrlock() call got
removed which also required adaptation.
QAPI docs became stricter requiring to document all members.
Other minor changes:
- Single parameter from migration_is_running() was dropped.
- qemu_mutex_(un)lock_iothread() got renamed to bql_(un)lock().
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
This version includes both the AioContext lock and the block graph
lock, so there might be some deadlocks lurking. It's not possible to
disable the block graph lock like was done in QEMU 8.1, because there
are no changes like the function bdrv_schedule_unref() that require
it. QEMU 9.0 will finally get rid of the AioContext locking.
During live-restore with a VirtIO SCSI drive with iothread there is a
known racy deadlock related to the AioContext lock. Not new [1], but
not sure if more likely now. Should be fixed in QEMU 9.0.
The block graph lock comes with annotations that can be checked by
clang's TSA. This required changes to the block drivers, i.e.
alloc-track, pbs, zeroinit as well as taking the appropriate locks
in pve-backup, savevm-async, vma-reader.
Local variable shadowing is prohibited via a compiler flag now,
required slight adaptation in vma.c.
Major changes only affect alloc-track:
* It is not possible to call a generated co-wrapper like
bdrv_get_info() while holding the block graph lock exclusively [0],
which does happen during initialization of alloc-track when the
backing hd is set and the refresh_limits driver callback is invoked.
The bdrv_get_info() call to get the cluster size is moved to
directly after opening the file child in track_open().
The important thing is that at least the request alignment for the
write target is used, because then the RMW cycle in bdrv_pwritev
will gather enough data from the backing file. Partial cluster
allocations in the target are not a fundamental issue, because the
driver returns its allocation status based on the bitmap, so any
other data that maps to the same cluster will still be copied later
by a stream job (or during writes to that cluster).
* Replacing the node cannot be done in the
track_co_change_backing_file() callback, because it is a coroutine
and cannot hold the block graph lock exclusively. So it is moved to
the stream job itself with the auto-remove option not having an
effect anymore (qemu-server would always set it anyways).
In the future, there could either be a special option for the stream
job, or maybe the upcoming blockdev-replace QMP command can be used.
Replacing the backing child is actually already done in the stream
job, so no need to do it in the track_co_change_backing_file()
callback. It also cannot be called from a coroutine. Looking at the
implementation in the qcow2 driver, it doesn't seem to be intended
to change the backing child itself, just update driver-internal
state.
Other changes:
* alloc-track: Error out early when used without auto-remove. Since
replacing the node now happens in the stream job, where the option
cannot be read from (it's internal to the driver), it will always be
treated as 'on'. Makes sure to have users beside qemu-server notice
the change (should they even exist). The option can be fully dropped
in the future while adding a version guard in qemu-server.
* alloc-track: Avoid seemingly superfluous child permission update.
Doesn't seem necessary nowadays (maybe after commit "alloc-track:
fix deadlock during drop" where the dropping is not rescheduled and
delayed anymore or some upstream change). Replacing the block node
will already update the permissions of the new node (which was the
file child before). Should there really be some issue, instead of
having a drop state, this could also be just based off the fact
whether there is still a backing child.
Dumping the cumulative (shared) permissions for the BDS with a debug
print yields the same values after this patch and with QEMU 8.1,
namely 3 and 5.
* PBS block driver: compile unconditionally. Proxmox VE always needs
it and something in the build process changed to make it not enabled
by default. Probably would need to move the build option to meson
otherwise.
* backup: job unreferencing during cleanup needs to happen outside of
coroutine, so it was moved to before invoking the clean
* mirror: Cherry-pick stable fix to avoid potential deadlock.
* savevm-async: migrate_init now can fail, so propagate potential
error.
* savevm-async: compression counters are not accessible outside
migration/ram-compress now, so drop code that prophylactically set
it to zero.
[0]: https://lore.kernel.org/qemu-devel/220be383-3b0d-4938-b584-69ad214e5d5d@proxmox.com/
[1]: https://lore.kernel.org/qemu-devel/e13b488e-bf13-44f2-acca-e724d14f43fd@proxmox.com/
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Most notable fixes from a Proxmox VE perspective are:
* "virtio-net: correctly copy vnet header when flushing TX"
To prevent a stack overflow that could lead to leaking parts of the
QEMU process's memory.
* "hw/pflash: implement update buffer for block writes"
To prevent an edge case for half-completed writes. This potentially
affected EFI disks.
* Fixes to i386 emulation and ARM emulation.
No changes for patches were necessary (all are just automatic context
changes).
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
While the patch gives bdrv_graph_wrlock() as an example where the
issue can manifest, something similar can happen even when that is
disabled. Was able to reproduce the issue with
while true; do qm resize 115 scsi0 +4M; sleep 1; done
while running
fio --name=make-mirror-work --size=100M --direct=1 --rw=randwrite \
--bs=4k --ioengine=psync --numjobs=5 --runtime=1200 --time_based
in the VM.
Fix picked up from:
https://lists.nongnu.org/archive/html/qemu-devel/2023-12/msg01102.html
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Bigger notable changes:
* Commit 1a30b0f5d7 ("block: .bdrv_open is non-coroutine and
unlocked") broke the PVE backup patches, in particular setting up
the backup dump block driver, because bdrv_new_open_driver() cannot
be called from a coroutine. To fix it, bdrv_co_open() is used
instead, and while it's a much more involved function, the result
should be essentially the same. The only difference I noticed is
that the BDRV_O_ALLOW_RDWR flag is also set in the resulting bds
(block driver state), but that shouldn't hurt.
Smaller notable changes:
* aio_set_fd_handler() dropped its 'is_external' parameter stating
that all callers now pass false in 60f782b6b7 ("aio: remove
aio_disable_external() API"). The calls in the PVE patches also
passed false, so just drop the parameter too.
* global_state_store() does not have a return value anymore, so the
user in the PVE savevm-async patch was adapted. For context, see
c33f1829f8 ("migration: never fail in global_state_store()").
* Renames affecting the PVE savevm-async patch:
migrate_use_block() -> migrate_block() and ram_counters -> mig_stats
9d4b1e5f22 ("migration: Move migrate_use_block() to options.c")
aff3f6606d ("migration: Rename ram_counters to mig_stats")
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
The QAPI change for QEMU 8.0 dropped redundant has_foo parameters, but
in the blockdev_mirror_common() function (which is not part of the
QAPI itself but called from there) the argument pair was has_bitmap
and bitmap_name rather than has_bitmap and bitmap.
Reported-by: Aaron Lauterer <a.lauterer@proxmox.com>
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Changes to other patches are all just metadata/context changes except
for pvebackup_co_prepare() needing to call bdrv_co_unref() rather than
bdrv_unref(), because it is a coroutine itself. This is documented in
d6ee2e324e ("block-coroutine-wrapper: Introduce no_co_wrapper"). The
change is necessary, because one of the stable fixes converts
bdrv_unref and blk_unref into no_co_wrappers (in preparation for a
second patch to fix a hang with the block resize QMP command).
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Many changes were necessary this time around:
* QAPI was changed to avoid redundant has_* variables, see commit
44ea9d9be3 ("qapi: Start to elide redundant has_FOO in generated C")
for details. This affected many QMP commands added by Proxmox too.
* Pending querying for migration got split into two functions, one to
estimate, one for exact value, see commit c8df4a7aef ("migration:
Split save_live_pending() into state_pending_*") for details. Relevant
for savevm-async and PBS dirty bitmap.
* Some block (driver) functions got converted to coroutines, so the
Proxmox block drivers needed to be adapted.
* Alloc track auto-detaching during PBS live restore got broken by
AioContext-related changes resulting in a deadlock. The current, hacky
method was replaced by a simpler one. Stefan apparently ran into a
problem with that when he wrote the driver, but there were
improvements in the stream job code since then and I didn't manage to
reproduce the issue. It's a separate patch "alloc-track: fix deadlock
during drop" for now, you can find the details there.
* Async snapshot-related changes:
- The pending querying got adapted to the above-mentioned split and
a patch is added to optimize it/make it more similar to what
upstream code does.
- Added initialization of the compression counters (for
future-proofing).
- It's necessary the hold the BQL (big QEMU lock = iothread mutex)
during the setup phase, because block layer functions are used there
and not doing so leads to racy, hard-to-debug crashes or hangs. It's
necessary to change some upstream code too for this, a version of
the patch "migration: for snapshots, hold the BQL during setup
callbacks" is intended to be upstreamed.
- Need to take the bdrv graph read lock before flushing.
* hmp_info_balloon was moved to a different file.
* Needed to include a new headers from time to time to still get the
correct functions.
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
User-facing breaking change:
The slirp submodule for user networking got removed. It would be
necessary to add the --enable-slirp option to the build and/or install
the appropriate library to continue building it. Since PVE is not
explicitly supporting it, it would require additionally installing the
libslirp0 package on all installations and there is *very* little
mention on the community forum when searching for "slirp" or
"netdev user", the plan is to only enable it again if there is some
real demand for it.
Notable changes:
* The big change for this release is the rework of job locking, using
a job mutex and introducing _locked() variants of job API functions
moving away from call-side AioContext locking. See (in the qemu
submodule) commit 6f592e5aca ("job.c: enable job lock/unlock and
remove Aiocontext locks") and previous commits for context.
Changes required for the backup patches:
* Use WITH_JOB_LOCK_GUARD() and call the _locked() variant of job
API functions where appropriate (many are only availalbe as
a _locked() variant).
* Remove acquiring/releasing AioContext around functions taking the
job mutex lock internally.
The patch introducing sequential transaction support for jobs needs
to temporarily unlock the job mutex to call job_start() when
starting the next job in the transaction.
* The zeroinit block driver now marks its child as primary.
The documentation in include/block/block-common.h states:
> Filter node has exactly one FILTERED|PRIMARY child, and may have
> other children which must not have these bits
Without this, an assert will trigger when copying to a zeroinit target
with qemu-img convert, because bdrv_child_cb_attach() expects any
non-PRIMARY child to be not FILTERED:
> qemu-img convert -n -p -f raw -O raw input.raw zeroinit:output.raw
> qemu-img: ../block.c:1476: bdrv_child_cb_attach: Assertion
> `!(child->role & BDRV_CHILD_FILTERED)' failed.
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Notable changes:
* The only big change is the switch to using a custom QIOChannel for
savevm-async, because the previously used QEMUFileOps was dropped.
Changes to the current implementation:
* Switch to vector based methods as required for an IO channel. For
short reads the passed-in IO vector is stuffed with zeroes at the
end, just to be sure.
* For reading: The documentation in include/io/channel.h states that
at least one byte should be read, so also error out when whe are
at the very end instead of returning 0.
* For reading: Fix off-by-one error when request goes beyond end.
The wrong code piece was:
if ((pos + size) > maxlen) {
size = maxlen - pos - 1;
}
Previously, the last byte would not be read. It's actually
possible to get a snapshot .raw file that has content all the way
up the final 512 byte (= BDRV_SECTOR_SIZE) boundary without any
trailing zero bytes (I wrote a script to do it).
Luckily, it didn't cause a real issue, because qemu_loadvm_state()
is not interested in the final (i.e. QEMU_VM_VMDESCRIPTION)
section. The buffer for reading it is simply freed up afterwards
and the function will assume that it read the whole section, even
if that's not the case.
* For writing: Make use of the generated blk_pwritev() wrapper
instead of manually wrapping the coroutine to simplify and save a
few lines.
* Adapt to changed interfaces for blk_{pread,pwrite}:
* a9262f551e ("block: Change blk_{pread,pwrite}() param order")
* 3b35d4542c ("block: Add a 'flags' param to blk_pread()")
* bf5b16fa40 ("block: Make blk_{pread,pwrite}() return 0 on success")
Those changes especially affected the qemu-img dd patches, because
the context also changed, but also some of our block drivers used
the functions.
* Drop qemu-common.h include: it got renamed after essentially
everything was moved to other headers. The only remaining user I
could find for things dropped from the header between 7.0 and 7.1
was qemu_get_vm_name() in the iscsi-initiatorname patch, but it
already includes the header to which the function was moved.
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Only very minor changes needed:
* Most patches in extra (or some version of them) are part of 7.0.0.
* aio_set_fd_handler got an extra parameter, but can just pass NULL
like we did for the related 'poll' parameter. See QEMU commit
826cc32423db2a99d184dbf4f507c737d7e7a4ae for more.
* Add include for qemu/memalign.h in vma.c and vma-writer.c.
* Add reverts for fixups of already reverted 0347a8fd4c ("block/rbd:
implement bdrv_co_block_status") that came in with 7.0.0. Those
fixups are not enough, see Proxmox bugzilla #4047.
* Two trivial context changes for bitmap-mirror patches.
* block_int.h got split up into multiple headers.
* Some context changes in configure and meson.build.
* Used the oppurtunity to squash fixup of bdrv_backuo_dump_create typo
in a later patch into the patch introducing the function (had to
move code to new header during rebase).
Signed-off-by: Fabian Ebner <f.ebner@proxmox.com>
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
Notable changes:
* bdrv_co_p{discard,readv,writev,write_zeroes} function signatures
changed, to using int64_t for offsets/bytes and some still had int
rather than BrdvRequestFlags for the flags.
* job_cancel_sync now has a force parameter. Commit messages in
73895f3838cd7fdaf185cf1dbc47be58844a966f
4cfb3f05627ad82af473e7f7ae113c3884cd04e3
sound like using force=true makes more sense.
* Added 3 patches coming in via qemu-stable tag, most important one is
to work around a librbd issue.
* Added another 3 patches from qemu-devel to fix issue leading to
crash when live migrating with iothread.
* cluster_size calculation helper changed (see patch pve/0026).
* QAPI's if conditionals now use 'CONFIG_FOO' rather than
'defined(CONFIG_FOO)'
Signed-off-by: Fabian Ebner <f.ebner@proxmox.com>
Very clean rebase, only the +pve version handling needed manual fixing.
Drops two applied patches from extra/ and adds one new from upstream
(extra/0001*, fixes VNC over unix sockets) as well as 3 of my own for
allowing password changes on custom VNC displays again (as seen and
reviewed upstream, but not yet applied).
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
Mostly minor changes, bigger ones summarized:
* QEMU's internal backup code now uses a new async system, which allows
parallel requests - the default max_workers settings is 64, I chose
less, since 64 put enough stress on QEMU that the guest became
practically unusable during the backup, and 16 still shows quite a
nice measureable performance improvement. Little code changes for us
though.
* 'malformed' QAPI parameters/functions are now a build error (i.e.
using '_' vs '-'), I chose to just whitelist our calls in the name of
backwards compatibility.
* monitor OOB race fix now uses the upstream variant, cherry-picked from
origin/master since it's not in 6.0 by default
* last patch fixes a bug with snapshot rollback related to the new yank
system
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
...instead of having them in the middle of the backup related patches.
These might (hopefully) become upstream at some point as well.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Fiona Ebner