Add Vitastor support

Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>

Makefile

@@ -17,10 +17,14 @@ all: $(DEBS)
 
 .PHONY: submodule
 submodule:
-	test -f "$(SRCDIR)/configure" || git submodule update --init --recursive
+ifeq ($(shell test -f "$(SRCDIR)/configure" && echo 1 || echo 0), 0)
+	git submodule update --init --recursive
+	cd $(SRCDIR); meson subprojects download
+endif
 
 PC_BIOS_FW_PURGE_LIST_IN = \
 	hppa-firmware.img \
+	hppa-firmware64.img \
 	openbios-ppc \
 	openbios-sparc32 \
 	openbios-sparc64 \
@@ -28,7 +32,8 @@ PC_BIOS_FW_PURGE_LIST_IN = \
 	s390-ccw.img \
 	s390-netboot.img \
 	u-boot.e500 \
-	.*\.dtb \
+	.*[a-zA-Z0-9]\.dtb \
+	.*[a-zA-Z0-9]\.dts \
 	qemu_vga.ndrv \
 	slof.bin \
 	opensbi-riscv.*-generic-fw_dynamic.bin \
@@ -36,16 +41,14 @@ PC_BIOS_FW_PURGE_LIST_IN = \
 BLOB_PURGE_SED_CMDS = $(foreach FILE,$(PC_BIOS_FW_PURGE_LIST_IN),-e "/$(FILE)/d")
 BLOB_PURGE_FILTER = $(foreach FILE,$(PC_BIOS_FW_PURGE_LIST_IN),-e "$(FILE)")
 
-$(BUILDDIR): keycodemapdb | submodule
+$(BUILDDIR): submodule
 	# check if qemu/ was used for a build
 	# if so, please run 'make distclean' in the submodule and try again
 	test ! -f $(SRCDIR)/build/config.status
 	rm -rf $@.tmp $@
 	cp -a $(SRCDIR) $@.tmp
 	cp -a debian $@.tmp/debian
-	rm -rf $@.tmp/ui/keycodemapdb
 	rm -rf $@.tmp/roms/edk2 # packaged separately
-	cp -a keycodemapdb $@.tmp/ui/
 	find $@.tmp/pc-bios -type f | grep $(BLOB_PURGE_FILTER) | xargs rm -f
 	sed -i $(BLOB_PURGE_SED_CMDS) $@.tmp/pc-bios/meson.build
 	echo "git clone git://git.proxmox.com/git/pve-qemu.git\\ngit checkout $(GITVERSION)" > $@.tmp/debian/SOURCE
@@ -55,7 +58,7 @@ $(BUILDDIR): keycodemapdb | submodule
 deb kvm: $(DEBS)
 $(DEB_DBG): $(DEB)
 $(DEB): $(BUILDDIR)
-	cd $(BUILDDIR); dpkg-buildpackage -b -us -uc -j
+	cd $(BUILDDIR); dpkg-buildpackage -b -us -uc -j32
 	lintian $(DEBS)
 
 sbuild: $(DSC)
@@ -73,17 +76,6 @@ dsc:
 $(DSC): $(ORIG_SRC_TAR) $(BUILDDIR)
 	cd $(BUILDDIR); dpkg-buildpackage -S -us -uc -d
 
-.PHONY: update
-update:
-	cd $(SRCDIR) && git submodule deinit ui/keycodemapdb || true
-	rm -rf $(SRCDIR)/ui/keycodemapdb
-	mkdir $(SRCDIR)/ui/keycodemapdb
-	cd $(SRCDIR) && git submodule update --init ui/keycodemapdb
-	rm -rf keycodemapdb
-	mkdir keycodemapdb
-	cp -R $(SRCDIR)/ui/keycodemapdb/* keycodemapdb/
-	git add keycodemapdb
-
 .PHONY: upload
 upload: UPLOAD_DIST ?= $(DEB_DISTRIBUTION)
 upload: $(DEBS)

debian/changelog

@@ -1,3 +1,178 @@
+pve-qemu-kvm (9.0.0-2+vitastor1) bookworm; urgency=medium
+
+  * Add Vitastor support
+
+ -- Vitaliy Filippov <vitalif@yourcmc.ru>  Mon, 20 May 2024 19:53:28 +0300
+
+pve-qemu-kvm (9.0.0-2) bookworm; urgency=medium
+
+  * fix #5409: backup: fix copy-before-write timeout
+
+  * backup: improve error when copy-before-write fails for fleecing
+
+  * fix forwards and backwards migration with VirtIO-GPU display
+
+  * fix a regression in pflash device introduced in 8.2
+
+  * revert a commit for VirtIO PCI devices that turned out to cause more
+    potential security issues than what it fixed
+
+  * move compatibility flags for a new VirtIO-net feature to the correct
+    machine type. The feature was introduced in QEMU 8.2, but the
+    compatibility flags got added to machine version 8.0 instead of 8.1. This
+    breaks backwards migration with machine version 8.1 from a 8.2/9.0 binary
+    to an 8.1 binary, in cases where the guest kernel enables the feature
+    (e.g. Ubuntu 23.10).
+    While that breaks migration with machine version 8.1 from an unpatched to
+    a patched binary, Proxmox VE only ever had 8.2 on the test repository and
+    9.0 not yet in any public repository.
+
+ -- Proxmox Support Team <support@proxmox.com>  Fri, 17 May 2024 17:04:52 +0200
+
+pve-qemu-kvm (9.0.0-1) bookworm; urgency=medium
+
+  * update submodule and patches to QEMU 9.0.0
+
+ -- Proxmox Support Team <support@proxmox.com>  Mon, 29 Apr 2024 10:51:37 +0200
+
+pve-qemu-kvm (8.2.2-1) bookworm; urgency=medium
+
+  * update submodule and patches to QEMU 8.2.2
+
+ -- Proxmox Support Team <support@proxmox.com>  Sat, 27 Apr 2024 12:44:30 +0200
+
+pve-qemu-kvm (8.1.5-5) bookworm; urgency=medium
+
+  * implement support for backup fleecing
+
+ -- Proxmox Support Team <support@proxmox.com>  Thu, 11 Apr 2024 17:46:48 +0200
+
+pve-qemu-kvm (8.1.5-4) bookworm; urgency=medium
+
+  * fix live-import for certain kinds of VMDK images that rely on padding
+
+  * backup: avoid bubbling up first error if it's an ECANCELED one, as those
+    are often a result of cancling the job due to running into an actual
+    issue.
+
+  * backup: factor out & clean up gathering device info into helper
+
+ -- Proxmox Support Team <support@proxmox.com>  Tue, 12 Mar 2024 14:08:40 +0100
+
+pve-qemu-kvm (8.1.5-3) bookworm; urgency=medium
+
+  * backport fix for potential deadlock during QMP stop command if the VM has
+    disks attached through VirtIO-Block and IO-Thread enabled
+
+  * fix #4507: add patch to automatically increase NOFILE soft limit
+
+ -- Proxmox Support Team <support@proxmox.com>  Wed, 21 Feb 2024 20:11:23 +0100
+
+pve-qemu-kvm (8.1.5-2) bookworm; urgency=medium
+
+  * work around for a situation where guest IO might get stuck, if the VM is
+    configure  with iothread and VirtIO block/SCSI
+
+ -- Proxmox Support Team <support@proxmox.com>  Fri, 02 Feb 2024 19:41:27 +0100
+
+pve-qemu-kvm (8.1.5-1) bookworm; urgency=medium
+
+  * update to 8.1.5 stable release, including more relevant fixes like:
+    - virtio-net: correctly copy vnet header when flushing TX
+    - hw/pflash: implement update buffer for block writes
+    - Fixes to i386 emulation and ARM emulation.
+
+ -- Proxmox Support Team <support@proxmox.com>  Fri, 02 Feb 2024 19:08:13 +0100
+
+pve-qemu-kvm (8.1.2-6) bookworm; urgency=medium
+
+  * revert attempted fix to avoid rare issue with stuck guest IO when using
+    iothread, because it caused a much more common issue with iothreads
+    consuming too much CPU
+
+ -- Proxmox Support Team <support@proxmox.com>  Fri, 15 Dec 2023 14:22:06 +0100
+
+pve-qemu-kvm (8.1.2-5) bookworm; urgency=medium
+
+  * backport workaround for stuck guest IO with iothread and VirtIO block/SCSI
+    in some rare edge cases
+
+  * backport fix for potential deadlock when issuing the "resize" QMP command
+    for a disk that is using iothread
+
+ -- Proxmox Support Team <support@proxmox.com>  Mon, 11 Dec 2023 16:58:27 +0100
+
+pve-qemu-kvm (8.1.2-4) bookworm; urgency=medium
+
+  * fix vnc clipboard in the host to guest direction
+
+ -- Proxmox Support Team <support@proxmox.com>  Wed, 22 Nov 2023 14:28:21 +0100
+
+pve-qemu-kvm (8.1.2-3) bookworm; urgency=medium
+
+  * fix #5054: backport fix for software reset with SATA, avoiding breakage
+    with, e.g., some FreeBSD VMs
+
+ -- Proxmox Support Team <support@proxmox.com>  Mon, 20 Nov 2023 10:24:50 +0100
+
+pve-qemu-kvm (8.1.2-2) bookworm; urgency=medium
+
+  * revert "x86: acpi: workaround Windows not handling name references in
+    Package properly" as that seems to have broken networking (and possibly
+    other things) one some localized variants of Windows (e.g., the German
+    versions).
+
+ -- Proxmox Support Team <support@proxmox.com>  Fri, 17 Nov 2023 11:55:23 +0100
+
+pve-qemu-kvm (8.1.2-1) bookworm; urgency=medium
+
+  * update submodule and patches to QEMU 8.1.2
+
+  * use QEMU's keycode-map-db again instead of our static copy from QEMU 6.0
+
+  * disable graph locking, newly introduced in the 8.1 release, as it has
+    still various deadlock issuess, e.g., during canceling backup jobs.
+
+ -- Proxmox Support Team <support@proxmox.com>  Tue, 24 Oct 2023 13:42:45 +0200
+
+pve-qemu-kvm (8.0.2-7) bookworm; urgency=medium
+
+  * fix #2874: SATA: avoid unsolicited write to sector 0 during reset
+
+ -- Proxmox Support Team <support@proxmox.com>  Wed, 04 Oct 2023 08:33:35 +0200
+
+pve-qemu-kvm (8.0.2-6) bookworm; urgency=medium
+
+  * fix #1534: vma: add extract-filter for disk images allowing users to pass
+    a comma separated list of the disks they want to extract from an archive.
+
+  * backup: create jobs in a drained section to avoid subtle bugs where
+    something interferes with the block-copy-state bitmap on initialization
+
+  * backup: drop experimental, and since a while also fully broken, directory
+    backup format (BACKUP_FORMAT_DIR). This format was never exposed via the
+    Proxmox VE API, but only available via QMP, as its broken since QEMU 8 and
+    we got zero reports about that, it's safe to assume that there are no
+    public users, so just remove it completely.
+
+ -- Proxmox Support Team <support@proxmox.com>  Wed, 06 Sep 2023 17:03:59 +0200
+
+pve-qemu-kvm (8.0.2-5) bookworm; urgency=medium
+
+  * improve memory footprint after backup by not keeping as much memory
+    resident.
+
+  * fix file descriptor leak for vhost (used by default by vNICs).
+
+ -- Proxmox Support Team <support@proxmox.com>  Wed, 16 Aug 2023 11:52:24 +0200
+
+pve-qemu-kvm (8.0.2-4) bookworm; urgency=medium
+
+  * fix resume for snapshot and hibernate in combination with iothread and
+    dirty bitmap
+
+ -- Proxmox Support Team <support@proxmox.com>  Fri, 28 Jul 2023 12:58:22 +0200
+
 pve-qemu-kvm (8.0.2-3) bookworm; urgency=medium
 
   * fix regression in QEMU 8.0 for drive mirror with bitmap

debian/control

@@ -37,6 +37,7 @@ Build-Depends: debhelper-compat (= 13),
                python3-minimal,
                python3-sphinx,
                python3-sphinx-rtd-theme,
+               python3-venv,
                quilt,
                uuid-dev,
                xfslibs-dev,
@@ -58,6 +59,7 @@ Depends: ceph-common (>= 0.48),
          libspice-server1 (>= 0.14.0~),
          libusb-1.0-0 (>= 1.0.17-1),
          libusbredirparser1 (>= 0.6-2),
+         vitastor-client (>= 0.9.4),
          libuuid1,
          ${misc:Depends},
          ${shlibs:Depends},
@@ -79,6 +81,7 @@ Replaces: pve-kvm,
           qemu-system-arm,
           qemu-system-x86,
           qemu-utils,
+Breaks: qemu-server (<= 8.0.6)
 Description: Full virtualization on x86 hardware
  Using KVM, one can run multiple virtual PCs, each running unmodified Linux or
  Windows images. Each virtual machine has private virtualized hardware: a

debian/patches/bitmap-mirror/0001-drive-mirror-add-support-for-sync-bitmap-mode-never.patch

@@ -27,18 +27,18 @@ Signed-off-by: Ma Haocong <mahaocong@didichuxing.com>
 Signed-off-by: John Snow <jsnow@redhat.com>
 Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
 Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
-[FE: rebased for 8.0]
+[FE: rebased for 8.2.2]
 Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
 ---
- block/mirror.c                         | 98 +++++++++++++++++++++-----
+ block/mirror.c                         | 99 ++++++++++++++++++++------
  blockdev.c                             | 38 +++++++++-
  include/block/block_int-global-state.h |  4 +-
- qapi/block-core.json                   | 29 ++++++--
+ qapi/block-core.json                   | 25 ++++++-
  tests/unit/test-block-iothread.c       |  4 +-
- 5 files changed, 144 insertions(+), 29 deletions(-)
+ 5 files changed, 142 insertions(+), 28 deletions(-)
 
 diff --git a/block/mirror.c b/block/mirror.c
-index 663e2b7002..9099c75992 100644
+index 1bdce3b657..0c5c72df2e 100644
 --- a/block/mirror.c
 +++ b/block/mirror.c
 @@ -51,7 +51,7 @@ typedef struct MirrorBlockJob {
@@ -50,7 +50,7 @@ index 663e2b7002..9099c75992 100644
      BlockMirrorBackingMode backing_mode;
      /* Whether the target image requires explicit zero-initialization */
      bool zero_target;
-@@ -65,6 +65,8 @@ typedef struct MirrorBlockJob {
+@@ -73,6 +73,8 @@ typedef struct MirrorBlockJob {
      size_t buf_size;
      int64_t bdev_length;
      unsigned long *cow_bitmap;
@@ -59,9 +59,9 @@ index 663e2b7002..9099c75992 100644
      BdrvDirtyBitmap *dirty_bitmap;
      BdrvDirtyBitmapIter *dbi;
      uint8_t *buf;
-@@ -703,7 +705,8 @@ static int mirror_exit_common(Job *job)
-     bdrv_child_refresh_perms(mirror_top_bs, mirror_top_bs->backing,
+@@ -722,7 +724,8 @@ static int mirror_exit_common(Job *job)
                               &error_abort);
+ 
      if (!abort && s->backing_mode == MIRROR_SOURCE_BACKING_CHAIN) {
 -        BlockDriverState *backing = s->is_none_mode ? src : s->base;
 +        BlockDriverState *backing;
@@ -69,7 +69,7 @@ index 663e2b7002..9099c75992 100644
          BlockDriverState *unfiltered_target = bdrv_skip_filters(target_bs);
  
          if (bdrv_cow_bs(unfiltered_target) != backing) {
-@@ -801,6 +804,16 @@ static void mirror_abort(Job *job)
+@@ -819,6 +822,16 @@ static void mirror_abort(Job *job)
      assert(ret == 0);
  }
  
@@ -86,7 +86,7 @@ index 663e2b7002..9099c75992 100644
  static void coroutine_fn mirror_throttle(MirrorBlockJob *s)
  {
      int64_t now = qemu_clock_get_ns(QEMU_CLOCK_REALTIME);
-@@ -987,7 +1000,8 @@ static int coroutine_fn mirror_run(Job *job, Error **errp)
+@@ -1015,7 +1028,8 @@ static int coroutine_fn mirror_run(Job *job, Error **errp)
      mirror_free_init(s);
  
      s->last_pause_ns = qemu_clock_get_ns(QEMU_CLOCK_REALTIME);
@@ -96,7 +96,7 @@ index 663e2b7002..9099c75992 100644
          ret = mirror_dirty_init(s);
          if (ret < 0 || job_is_cancelled(&s->common.job)) {
              goto immediate_exit;
-@@ -1240,6 +1254,7 @@ static const BlockJobDriver mirror_job_driver = {
+@@ -1304,6 +1318,7 @@ static const BlockJobDriver mirror_job_driver = {
          .run                    = mirror_run,
          .prepare                = mirror_prepare,
          .abort                  = mirror_abort,
@@ -104,7 +104,7 @@ index 663e2b7002..9099c75992 100644
          .pause                  = mirror_pause,
          .complete               = mirror_complete,
          .cancel                 = mirror_cancel,
-@@ -1256,6 +1271,7 @@ static const BlockJobDriver commit_active_job_driver = {
+@@ -1322,6 +1337,7 @@ static const BlockJobDriver commit_active_job_driver = {
          .run                    = mirror_run,
          .prepare                = mirror_prepare,
          .abort                  = mirror_abort,
@@ -112,7 +112,7 @@ index 663e2b7002..9099c75992 100644
          .pause                  = mirror_pause,
          .complete               = mirror_complete,
          .cancel                 = commit_active_cancel,
-@@ -1647,7 +1663,10 @@ static BlockJob *mirror_start_job(
+@@ -1714,7 +1730,10 @@ static BlockJob *mirror_start_job(
                               BlockCompletionFunc *cb,
                               void *opaque,
                               const BlockJobDriver *driver,
@@ -124,9 +124,9 @@ index 663e2b7002..9099c75992 100644
                               bool auto_complete, const char *filter_node_name,
                               bool is_mirror, MirrorCopyMode copy_mode,
                               Error **errp)
-@@ -1659,10 +1678,39 @@ static BlockJob *mirror_start_job(
-     uint64_t target_perms, target_shared_perms;
-     int ret;
+@@ -1728,10 +1747,39 @@ static BlockJob *mirror_start_job(
+ 
+     GLOBAL_STATE_CODE();
  
 -    if (granularity == 0) {
 -        granularity = bdrv_get_default_bitmap_granularity(target);
@@ -166,7 +166,7 @@ index 663e2b7002..9099c75992 100644
      assert(is_power_of_2(granularity));
  
      if (buf_size < 0) {
-@@ -1793,7 +1841,9 @@ static BlockJob *mirror_start_job(
+@@ -1871,7 +1919,9 @@ static BlockJob *mirror_start_job(
      s->replaces = g_strdup(replaces);
      s->on_source_error = on_source_error;
      s->on_target_error = on_target_error;
@@ -176,10 +176,10 @@ index 663e2b7002..9099c75992 100644
 +    s->bitmap_mode = bitmap_mode;
      s->backing_mode = backing_mode;
      s->zero_target = zero_target;
-     s->copy_mode = copy_mode;
-@@ -1814,6 +1864,18 @@ static BlockJob *mirror_start_job(
-         bdrv_disable_dirty_bitmap(s->dirty_bitmap);
-     }
+     qatomic_set(&s->copy_mode, copy_mode);
+@@ -1897,6 +1947,18 @@ static BlockJob *mirror_start_job(
+      */
+     bdrv_disable_dirty_bitmap(s->dirty_bitmap);
  
 +    if (s->sync_bitmap) {
 +        bdrv_dirty_bitmap_set_busy(s->sync_bitmap, true);
@@ -193,10 +193,10 @@ index 663e2b7002..9099c75992 100644
 +        }
 +    }
 +
+     bdrv_graph_wrlock();
      ret = block_job_add_bdrv(&s->common, "source", bs, 0,
                               BLK_PERM_WRITE_UNCHANGED | BLK_PERM_WRITE |
-                              BLK_PERM_CONSISTENT_READ,
-@@ -1891,6 +1953,9 @@ fail:
+@@ -1979,6 +2041,9 @@ fail:
          if (s->dirty_bitmap) {
              bdrv_release_dirty_bitmap(s->dirty_bitmap);
          }
@@ -206,7 +206,7 @@ index 663e2b7002..9099c75992 100644
          job_early_fail(&s->common.job);
      }
  
-@@ -1908,31 +1973,25 @@ void mirror_start(const char *job_id, BlockDriverState *bs,
+@@ -2001,35 +2066,28 @@ void mirror_start(const char *job_id, BlockDriverState *bs,
                    BlockDriverState *target, const char *replaces,
                    int creation_flags, int64_t speed,
                    uint32_t granularity, int64_t buf_size,
@@ -231,8 +231,12 @@ index 663e2b7002..9099c75992 100644
 -                   MirrorSyncMode_str(mode));
 -        return;
 -    }
+-
+     bdrv_graph_rdlock_main_loop();
 -    is_none_mode = mode == MIRROR_SYNC_MODE_NONE;
      base = mode == MIRROR_SYNC_MODE_TOP ? bdrv_backing_chain_next(bs) : NULL;
+     bdrv_graph_rdunlock_main_loop();
+ 
      mirror_start_job(job_id, bs, creation_flags, target, replaces,
                       speed, granularity, buf_size, backing_mode, zero_target,
                       on_source_error, on_target_error, unmap, NULL, NULL,
@@ -243,7 +247,7 @@ index 663e2b7002..9099c75992 100644
  }
  
  BlockJob *commit_active_start(const char *job_id, BlockDriverState *bs,
-@@ -1959,7 +2018,8 @@ BlockJob *commit_active_start(const char *job_id, BlockDriverState *bs,
+@@ -2056,7 +2114,8 @@ BlockJob *commit_active_start(const char *job_id, BlockDriverState *bs,
                       job_id, bs, creation_flags, base, NULL, speed, 0, 0,
                       MIRROR_LEAVE_BACKING_CHAIN, false,
                       on_error, on_error, true, cb, opaque,
@@ -254,10 +258,10 @@ index 663e2b7002..9099c75992 100644
                       errp);
      if (!job) {
 diff --git a/blockdev.c b/blockdev.c
-index e464daea58..50e4a9c682 100644
+index 057601dcf0..8682814a7a 100644
 --- a/blockdev.c
 +++ b/blockdev.c
-@@ -2942,6 +2942,9 @@ static void blockdev_mirror_common(const char *job_id, BlockDriverState *bs,
+@@ -2776,6 +2776,9 @@ static void blockdev_mirror_common(const char *job_id, BlockDriverState *bs,
                                     BlockDriverState *target,
                                     const char *replaces,
                                     enum MirrorSyncMode sync,
@@ -267,15 +271,15 @@ index e464daea58..50e4a9c682 100644
                                     BlockMirrorBackingMode backing_mode,
                                     bool zero_target,
                                     bool has_speed, int64_t speed,
-@@ -2960,6 +2963,7 @@ static void blockdev_mirror_common(const char *job_id, BlockDriverState *bs,
+@@ -2794,6 +2797,7 @@ static void blockdev_mirror_common(const char *job_id, BlockDriverState *bs,
  {
      BlockDriverState *unfiltered_bs;
      int job_flags = JOB_DEFAULT;
 +    BdrvDirtyBitmap *bitmap = NULL;
  
-     if (!has_speed) {
-         speed = 0;
-@@ -3011,6 +3015,29 @@ static void blockdev_mirror_common(const char *job_id, BlockDriverState *bs,
+     GLOBAL_STATE_CODE();
+     GRAPH_RDLOCK_GUARD_MAINLOOP();
+@@ -2848,6 +2852,29 @@ static void blockdev_mirror_common(const char *job_id, BlockDriverState *bs,
          sync = MIRROR_SYNC_MODE_FULL;
      }
  
@@ -305,7 +309,7 @@ index e464daea58..50e4a9c682 100644
      if (!replaces) {
          /* We want to mirror from @bs, but keep implicit filters on top */
          unfiltered_bs = bdrv_skip_implicit_filters(bs);
-@@ -3056,8 +3083,8 @@ static void blockdev_mirror_common(const char *job_id, BlockDriverState *bs,
+@@ -2889,8 +2916,8 @@ static void blockdev_mirror_common(const char *job_id, BlockDriverState *bs,
       * and will allow to check whether the node still exist at mirror completion
       */
      mirror_start(job_id, bs, target,
@@ -316,7 +320,7 @@ index e464daea58..50e4a9c682 100644
                   on_source_error, on_target_error, unmap, filter_node_name,
                   copy_mode, errp);
  }
-@@ -3202,6 +3229,8 @@ void qmp_drive_mirror(DriveMirror *arg, Error **errp)
+@@ -3034,6 +3061,8 @@ void qmp_drive_mirror(DriveMirror *arg, Error **errp)
  
      blockdev_mirror_common(arg->job_id, bs, target_bs,
                             arg->replaces, arg->sync,
@@ -325,7 +329,7 @@ index e464daea58..50e4a9c682 100644
                             backing_mode, zero_target,
                             arg->has_speed, arg->speed,
                             arg->has_granularity, arg->granularity,
-@@ -3223,6 +3252,8 @@ void qmp_blockdev_mirror(const char *job_id,
+@@ -3053,6 +3082,8 @@ void qmp_blockdev_mirror(const char *job_id,
                           const char *device, const char *target,
                           const char *replaces,
                           MirrorSyncMode sync,
@@ -334,7 +338,7 @@ index e464daea58..50e4a9c682 100644
                           bool has_speed, int64_t speed,
                           bool has_granularity, uint32_t granularity,
                           bool has_buf_size, int64_t buf_size,
-@@ -3271,7 +3302,8 @@ void qmp_blockdev_mirror(const char *job_id,
+@@ -3093,7 +3124,8 @@ void qmp_blockdev_mirror(const char *job_id,
      }
  
      blockdev_mirror_common(job_id, bs, target_bs,
@@ -345,10 +349,10 @@ index e464daea58..50e4a9c682 100644
                             has_granularity, granularity,
                             has_buf_size, buf_size,
 diff --git a/include/block/block_int-global-state.h b/include/block/block_int-global-state.h
-index 902406eb99..d559be928c 100644
+index d2201e27f4..cc1387ae02 100644
 --- a/include/block/block_int-global-state.h
 +++ b/include/block/block_int-global-state.h
-@@ -152,7 +152,9 @@ void mirror_start(const char *job_id, BlockDriverState *bs,
+@@ -158,7 +158,9 @@ void mirror_start(const char *job_id, BlockDriverState *bs,
                    BlockDriverState *target, const char *replaces,
                    int creation_flags, int64_t speed,
                    uint32_t granularity, int64_t buf_size,
@@ -360,31 +364,26 @@ index 902406eb99..d559be928c 100644
                    BlockdevOnError on_source_error,
                    BlockdevOnError on_target_error,
 diff --git a/qapi/block-core.json b/qapi/block-core.json
-index c05ad0c07e..3c945c1f93 100644
+index 746d1694c2..45ab548dfe 100644
 --- a/qapi/block-core.json
 +++ b/qapi/block-core.json
-@@ -2095,10 +2095,19 @@
- #        (all the disk, only the sectors allocated in the topmost image, or
- #        only new I/O).
+@@ -2174,6 +2174,15 @@
+ #     destination (all the disk, only the sectors allocated in the
+ #     topmost image, or only new I/O).
  #
-+# @bitmap: The name of a bitmap to use for sync=bitmap mode. This argument must
-+#          be present for bitmap mode and absent otherwise. The bitmap's
-+#          granularity is used instead of @granularity (since 4.1).
++# @bitmap: The name of a bitmap to use for sync=bitmap mode. This
++#     argument must be present for bitmap mode and absent otherwise.
++#     The bitmap's granularity is used instead of @granularity (Since
++#     4.1).
 +#
-+# @bitmap-mode: Specifies the type of data the bitmap should contain after
-+#               the operation concludes. Must be present if sync is "bitmap".
-+#               Must NOT be present otherwise. (Since 4.1)
++# @bitmap-mode: Specifies the type of data the bitmap should contain
++#     after the operation concludes. Must be present if sync is
++#     "bitmap". Must NOT be present otherwise. (Since 4.1)
 +#
- # @granularity: granularity of the dirty bitmap, default is 64K
- #               if the image format doesn't have clusters, 4K if the clusters
- #               are smaller than that, else the cluster size.  Must be a
--#               power of 2 between 512 and 64M (since 1.4).
-+#               power of 2 between 512 and 64M. Must not be specified if
-+#               @bitmap is present (since 1.4).
- #
- # @buf-size: maximum amount of data in flight from source to
- #            target (since 1.4).
-@@ -2138,7 +2147,9 @@
+ # @granularity: granularity of the dirty bitmap, default is 64K if the
+ #     image format doesn't have clusters, 4K if the clusters are
+ #     smaller than that, else the cluster size.  Must be a power of 2
+@@ -2216,7 +2225,9 @@
  { 'struct': 'DriveMirror',
    'data': { '*job-id': 'str', 'device': 'str', 'target': 'str',
              '*format': 'str', '*node-name': 'str', '*replaces': 'str',
@@ -395,28 +394,23 @@ index c05ad0c07e..3c945c1f93 100644
              '*speed': 'int', '*granularity': 'uint32',
              '*buf-size': 'int', '*on-source-error': 'BlockdevOnError',
              '*on-target-error': 'BlockdevOnError',
-@@ -2417,10 +2428,19 @@
- #        (all the disk, only the sectors allocated in the topmost image, or
- #        only new I/O).
+@@ -2496,6 +2507,15 @@
+ #     destination (all the disk, only the sectors allocated in the
+ #     topmost image, or only new I/O).
  #
-+# @bitmap: The name of a bitmap to use for sync=bitmap mode. This argument must
-+#          be present for bitmap mode and absent otherwise. The bitmap's
-+#          granularity is used instead of @granularity (since 4.1).
++# @bitmap: The name of a bitmap to use for sync=bitmap mode. This
++#     argument must be present for bitmap mode and absent otherwise.
++#     The bitmap's granularity is used instead of @granularity (since
++#     4.1).
 +#
-+# @bitmap-mode: Specifies the type of data the bitmap should contain after
-+#               the operation concludes. Must be present if sync is "bitmap".
-+#               Must NOT be present otherwise. (Since 4.1)
++# @bitmap-mode: Specifies the type of data the bitmap should contain
++#     after the operation concludes. Must be present if sync is
++#     "bitmap". Must NOT be present otherwise. (Since 4.1)
 +#
- # @granularity: granularity of the dirty bitmap, default is 64K
- #               if the image format doesn't have clusters, 4K if the clusters
- #               are smaller than that, else the cluster size.  Must be a
--#               power of 2 between 512 and 64M
-+#               power of 2 between 512 and 64M . Must not be specified if
-+#               @bitmap is present.
- #
- # @buf-size: maximum amount of data in flight from source to
- #            target
-@@ -2470,7 +2490,8 @@
+ # @granularity: granularity of the dirty bitmap, default is 64K if the
+ #     image format doesn't have clusters, 4K if the clusters are
+ #     smaller than that, else the cluster size.  Must be a power of 2
+@@ -2544,7 +2564,8 @@
  { 'command': 'blockdev-mirror',
    'data': { '*job-id': 'str', 'device': 'str', 'target': 'str',
              '*replaces': 'str',
@@ -427,10 +421,10 @@ index c05ad0c07e..3c945c1f93 100644
              '*buf-size': 'int', '*on-source-error': 'BlockdevOnError',
              '*on-target-error': 'BlockdevOnError',
 diff --git a/tests/unit/test-block-iothread.c b/tests/unit/test-block-iothread.c
-index 3a5e1eb2c4..c1ecc49073 100644
+index 3766d5de6b..afa44cbd34 100644
 --- a/tests/unit/test-block-iothread.c
 +++ b/tests/unit/test-block-iothread.c
-@@ -757,8 +757,8 @@ static void test_propagate_mirror(void)
+@@ -755,8 +755,8 @@ static void test_propagate_mirror(void)
  
      /* Start a mirror job */
      mirror_start("job0", src, target, NULL, JOB_DEFAULT, 0, 0, 0,
@@ -440,4 +434,4 @@ index 3a5e1eb2c4..c1ecc49073 100644
 +                 false, BLOCKDEV_ON_ERROR_REPORT, BLOCKDEV_ON_ERROR_REPORT,
                   false, "filter_node", MIRROR_COPY_MODE_BACKGROUND,
                   &error_abort);
-     WITH_JOB_LOCK_GUARD() {
+ 

debian/patches/bitmap-mirror/0002-drive-mirror-add-support-for-conditional-and-always-.patch

@@ -24,10 +24,10 @@ Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
  1 file changed, 18 insertions(+), 6 deletions(-)
 
 diff --git a/block/mirror.c b/block/mirror.c
-index 9099c75992..e2ff42067b 100644
+index 0c5c72df2e..37fee3fa25 100644
 --- a/block/mirror.c
 +++ b/block/mirror.c
-@@ -680,8 +680,6 @@ static int mirror_exit_common(Job *job)
+@@ -693,8 +693,6 @@ static int mirror_exit_common(Job *job)
          bdrv_unfreeze_backing_chain(mirror_top_bs, target_bs);
      }
  
@@ -36,9 +36,9 @@ index 9099c75992..e2ff42067b 100644
      /* Make sure that the source BDS doesn't go away during bdrv_replace_node,
       * before we can call bdrv_drained_end */
      bdrv_ref(src);
-@@ -782,6 +780,18 @@ static int mirror_exit_common(Job *job)
-     block_job_remove_all_bdrv(bjob);
-     bdrv_replace_node(mirror_top_bs, mirror_top_bs->backing->bs, &error_abort);
+@@ -800,6 +798,18 @@ static int mirror_exit_common(Job *job)
+     bdrv_drained_end(target_bs);
+     bdrv_unref(target_bs);
  
 +    if (s->sync_bitmap) {
 +        if (s->bitmap_mode == BITMAP_SYNC_MODE_ALWAYS ||
@@ -55,7 +55,7 @@ index 9099c75992..e2ff42067b 100644
      bs_opaque->job = NULL;
  
      bdrv_drained_end(src);
-@@ -1688,10 +1698,6 @@ static BlockJob *mirror_start_job(
+@@ -1757,10 +1767,6 @@ static BlockJob *mirror_start_job(
                         " sync mode",
                         MirrorSyncMode_str(sync_mode));
              return NULL;
@@ -66,7 +66,7 @@ index 9099c75992..e2ff42067b 100644
          }
      } else if (bitmap) {
          error_setg(errp,
-@@ -1708,6 +1714,12 @@ static BlockJob *mirror_start_job(
+@@ -1777,6 +1783,12 @@ static BlockJob *mirror_start_job(
              return NULL;
          }
          granularity = bdrv_dirty_bitmap_granularity(bitmap);

debian/patches/bitmap-mirror/0003-mirror-add-check-for-bitmap-mode-without-bitmap.patch

@@ -16,10 +16,10 @@ Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
  1 file changed, 3 insertions(+)
 
 diff --git a/blockdev.c b/blockdev.c
-index 50e4a9c682..e6b2b1e338 100644
+index 8682814a7a..5b75a085ee 100644
 --- a/blockdev.c
 +++ b/blockdev.c
-@@ -3036,6 +3036,9 @@ static void blockdev_mirror_common(const char *job_id, BlockDriverState *bs,
+@@ -2873,6 +2873,9 @@ static void blockdev_mirror_common(const char *job_id, BlockDriverState *bs,
          if (bdrv_dirty_bitmap_check(bitmap, BDRV_BITMAP_ALLOW_RO, errp)) {
              return;
          }

debian/patches/bitmap-mirror/0004-mirror-switch-to-bdrv_dirty_bitmap_merge_internal.patch

@@ -16,10 +16,10 @@ Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
  1 file changed, 4 insertions(+), 7 deletions(-)
 
 diff --git a/block/mirror.c b/block/mirror.c
-index e2ff42067b..f42953837b 100644
+index 37fee3fa25..6b3cce1007 100644
 --- a/block/mirror.c
 +++ b/block/mirror.c
-@@ -786,8 +786,8 @@ static int mirror_exit_common(Job *job)
+@@ -804,8 +804,8 @@ static int mirror_exit_common(Job *job)
               job->ret == 0 && ret == 0)) {
              /* Success; synchronize copy back to sync. */
              bdrv_clear_dirty_bitmap(s->sync_bitmap, NULL);
@@ -30,7 +30,7 @@ index e2ff42067b..f42953837b 100644
          }
      }
      bdrv_release_dirty_bitmap(s->dirty_bitmap);
-@@ -1881,11 +1881,8 @@ static BlockJob *mirror_start_job(
+@@ -1964,11 +1964,8 @@ static BlockJob *mirror_start_job(
      }
  
      if (s->sync_mode == MIRROR_SYNC_MODE_BITMAP) {
@@ -43,4 +43,4 @@ index e2ff42067b..f42953837b 100644
 +                                         NULL, true);
      }
  
-     ret = block_job_add_bdrv(&s->common, "source", bs, 0,
+     bdrv_graph_wrlock();

debian/patches/bitmap-mirror/0006-mirror-move-some-checks-to-qmp.patch

@@ -12,7 +12,7 @@ uniform w.r.t. backup block jobs.
 
 Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
 Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
-[FE: rebase for 8.0]
+[FE: rebase for 8.2.2]
 Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
 ---
  block/mirror.c             | 28 +++------------
@@ -21,12 +21,12 @@ Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
  3 files changed, 70 insertions(+), 59 deletions(-)
 
 diff --git a/block/mirror.c b/block/mirror.c
-index f42953837b..8f79efaa87 100644
+index 6b3cce1007..2f1223852b 100644
 --- a/block/mirror.c
 +++ b/block/mirror.c
-@@ -1688,31 +1688,13 @@ static BlockJob *mirror_start_job(
-     uint64_t target_perms, target_shared_perms;
-     int ret;
+@@ -1757,31 +1757,13 @@ static BlockJob *mirror_start_job(
+ 
+     GLOBAL_STATE_CODE();
  
 -    if (sync_mode == MIRROR_SYNC_MODE_INCREMENTAL) {
 -        error_setg(errp, "Sync mode '%s' not supported",
@@ -62,10 +62,10 @@ index f42953837b..8f79efaa87 100644
  
          if (bitmap_mode != BITMAP_SYNC_MODE_NEVER) {
 diff --git a/blockdev.c b/blockdev.c
-index e6b2b1e338..bdae211a54 100644
+index 5b75a085ee..d27d8c38ec 100644
 --- a/blockdev.c
 +++ b/blockdev.c
-@@ -3015,7 +3015,36 @@ static void blockdev_mirror_common(const char *job_id, BlockDriverState *bs,
+@@ -2852,7 +2852,36 @@ static void blockdev_mirror_common(const char *job_id, BlockDriverState *bs,
          sync = MIRROR_SYNC_MODE_FULL;
      }
  

debian/patches/extra/0001-monitor-qmp-fix-race-with-clients-disconnecting-earl.patch

@@ -48,7 +48,7 @@ Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
  6 files changed, 59 insertions(+), 5 deletions(-)
 
 diff --git a/include/monitor/monitor.h b/include/monitor/monitor.h
-index 033390f699..ad35d4fea8 100644
+index 965f5d5450..e04bd059b6 100644
 --- a/include/monitor/monitor.h
 +++ b/include/monitor/monitor.h
 @@ -16,6 +16,7 @@ extern QemuOptsList qemu_mon_opts;
@@ -60,10 +60,10 @@ index 033390f699..ad35d4fea8 100644
  void monitor_init_globals(void);
  void monitor_init_globals_core(void);
 diff --git a/monitor/monitor-internal.h b/monitor/monitor-internal.h
-index 53e3808054..a19f8cbc2b 100644
+index 252de85681..8db28f9272 100644
 --- a/monitor/monitor-internal.h
 +++ b/monitor/monitor-internal.h
-@@ -152,6 +152,13 @@ typedef struct {
+@@ -151,6 +151,13 @@ typedef struct {
      QemuMutex qmp_queue_lock;
      /* Input queue that holds all the parsed QMP requests */
      GQueue *qmp_requests;
@@ -78,10 +78,10 @@ index 53e3808054..a19f8cbc2b 100644
  
  /**
 diff --git a/monitor/monitor.c b/monitor/monitor.c
-index 8dc96f6af9..f3c38cb714 100644
+index 01ede1babd..5681bca346 100644
 --- a/monitor/monitor.c
 +++ b/monitor/monitor.c
-@@ -135,6 +135,21 @@ bool monitor_cur_is_qmp(void)
+@@ -117,6 +117,21 @@ bool monitor_cur_is_qmp(void)
      return cur_mon && monitor_is_qmp(cur_mon);
  }
  
@@ -104,10 +104,10 @@ index 8dc96f6af9..f3c38cb714 100644
   * Is @mon is using readline?
   * Note: not all HMP monitors use readline, e.g., gdbserver has a
 diff --git a/monitor/qmp.c b/monitor/qmp.c
-index 092c527b6f..6b8cfcf6d8 100644
+index a239945e8d..589c9524f8 100644
 --- a/monitor/qmp.c
 +++ b/monitor/qmp.c
-@@ -141,6 +141,8 @@ static void monitor_qmp_dispatch(MonitorQMP *mon, QObject *req)
+@@ -165,6 +165,8 @@ static void monitor_qmp_dispatch(MonitorQMP *mon, QObject *req)
      QDict *rsp;
      QDict *error;
  
@@ -116,7 +116,7 @@ index 092c527b6f..6b8cfcf6d8 100644
      rsp = qmp_dispatch(mon->commands, req, qmp_oob_enabled(mon),
                         &mon->common);
  
-@@ -156,7 +158,17 @@ static void monitor_qmp_dispatch(MonitorQMP *mon, QObject *req)
+@@ -180,7 +182,17 @@ static void monitor_qmp_dispatch(MonitorQMP *mon, QObject *req)
          }
      }
  
@@ -135,7 +135,7 @@ index 092c527b6f..6b8cfcf6d8 100644
      qobject_unref(rsp);
  }
  
-@@ -444,6 +456,7 @@ static void monitor_qmp_event(void *opaque, QEMUChrEvent event)
+@@ -461,6 +473,7 @@ static void monitor_qmp_event(void *opaque, QEMUChrEvent event)
  
      switch (event) {
      case CHR_EVENT_OPENED:
@@ -144,7 +144,7 @@ index 092c527b6f..6b8cfcf6d8 100644
          monitor_qmp_caps_reset(mon);
          data = qmp_greeting(mon);
 diff --git a/qapi/qmp-dispatch.c b/qapi/qmp-dispatch.c
-index 0990873ec8..e605003771 100644
+index f3488afeef..2624eb3470 100644
 --- a/qapi/qmp-dispatch.c
 +++ b/qapi/qmp-dispatch.c
 @@ -117,16 +117,28 @@ typedef struct QmpDispatchBH {
@@ -180,13 +180,13 @@ index 0990873ec8..e605003771 100644
      aio_co_wake(data->co);
  }
  
-@@ -231,6 +243,7 @@ QDict *qmp_dispatch(const QmpCommandList *cmds, QObject *request,
+@@ -250,6 +262,7 @@ QDict *coroutine_mixed_fn qmp_dispatch(const QmpCommandList *cmds, QObject *requ
              .ret        = &ret,
              .errp       = &err,
              .co         = qemu_coroutine_self(),
 +            .conn_nr    = monitor_get_connection_nr(cur_mon),
          };
-         aio_bh_schedule_oneshot(qemu_get_aio_context(), do_qmp_dispatch_bh,
+         aio_bh_schedule_oneshot(iohandler_get_aio_context(), do_qmp_dispatch_bh,
                                  &data);
 diff --git a/stubs/monitor-core.c b/stubs/monitor-core.c
 index afa477aae6..d3ff124bf3 100644

debian/patches/extra/0002-scsi-megasas-Internal-cdbs-have-16-byte-length.patch

@@ -22,10 +22,10 @@ Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
  1 file changed, 2 insertions(+), 12 deletions(-)
 
 diff --git a/hw/scsi/megasas.c b/hw/scsi/megasas.c
-index 9cbbb16121..d624866bb6 100644
+index 2d0c607177..97e51733af 100644
 --- a/hw/scsi/megasas.c
 +++ b/hw/scsi/megasas.c
-@@ -1780,7 +1780,7 @@ static int megasas_handle_io(MegasasState *s, MegasasCmd *cmd, int frame_cmd)
+@@ -1781,7 +1781,7 @@ static int megasas_handle_io(MegasasState *s, MegasasCmd *cmd, int frame_cmd)
      uint8_t cdb[16];
      int len;
      struct SCSIDevice *sdev = NULL;
@@ -34,7 +34,7 @@ index 9cbbb16121..d624866bb6 100644
  
      lba_count = le32_to_cpu(cmd->frame->io.header.data_len);
      lba_start_lo = le32_to_cpu(cmd->frame->io.lba_lo);
-@@ -1789,7 +1789,6 @@ static int megasas_handle_io(MegasasState *s, MegasasCmd *cmd, int frame_cmd)
+@@ -1790,7 +1790,6 @@ static int megasas_handle_io(MegasasState *s, MegasasCmd *cmd, int frame_cmd)
  
      target_id = cmd->frame->header.target_id;
      lun_id = cmd->frame->header.lun_id;
@@ -42,7 +42,7 @@ index 9cbbb16121..d624866bb6 100644
  
      if (target_id < MFI_MAX_LD && lun_id == 0) {
          sdev = scsi_device_find(&s->bus, 0, target_id, lun_id);
-@@ -1804,15 +1803,6 @@ static int megasas_handle_io(MegasasState *s, MegasasCmd *cmd, int frame_cmd)
+@@ -1805,15 +1804,6 @@ static int megasas_handle_io(MegasasState *s, MegasasCmd *cmd, int frame_cmd)
          return MFI_STAT_DEVICE_NOT_FOUND;
      }
  
@@ -58,7 +58,7 @@ index 9cbbb16121..d624866bb6 100644
      cmd->iov_size = lba_count * sdev->blocksize;
      if (megasas_map_sgl(s, cmd, &cmd->frame->io.sgl)) {
          megasas_write_sense(cmd, SENSE_CODE(TARGET_FAILURE));
-@@ -1823,7 +1813,7 @@ static int megasas_handle_io(MegasasState *s, MegasasCmd *cmd, int frame_cmd)
+@@ -1824,7 +1814,7 @@ static int megasas_handle_io(MegasasState *s, MegasasCmd *cmd, int frame_cmd)
  
      megasas_encode_lba(cdb, lba_start, lba_count, is_write);
      cmd->req = scsi_req_new(sdev, cmd->index,

debian/patches/extra/0003-ide-avoid-potential-deadlock-when-draining-during-tr.patch

@@ -55,10 +55,10 @@ Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
  1 file changed, 6 insertions(+), 6 deletions(-)
 
 diff --git a/hw/ide/core.c b/hw/ide/core.c
-index 45d14a25e9..08e1f0c3d7 100644
+index e8cb2dac92..3b21acf651 100644
 --- a/hw/ide/core.c
 +++ b/hw/ide/core.c
-@@ -444,7 +444,7 @@ static void ide_trim_bh_cb(void *opaque)
+@@ -456,7 +456,7 @@ static void ide_trim_bh_cb(void *opaque)
      iocb->bh = NULL;
      qemu_aio_unref(iocb);
  
@@ -67,7 +67,7 @@ index 45d14a25e9..08e1f0c3d7 100644
      blk_dec_in_flight(blk);
  }
  
-@@ -504,6 +504,8 @@ static void ide_issue_trim_cb(void *opaque, int ret)
+@@ -516,6 +516,8 @@ static void ide_issue_trim_cb(void *opaque, int ret)
  done:
      iocb->aiocb = NULL;
      if (iocb->bh) {
@@ -76,8 +76,8 @@ index 45d14a25e9..08e1f0c3d7 100644
          replay_bh_schedule_event(iocb->bh);
      }
  }
-@@ -515,9 +517,6 @@ BlockAIOCB *ide_issue_trim(
-     IDEState *s = opaque;
+@@ -528,9 +530,6 @@ BlockAIOCB *ide_issue_trim(
+     IDEDevice *dev = s->unit ? s->bus->slave : s->bus->master;
      TrimAIOCB *iocb;
  
 -    /* Paired with a decrement in ide_trim_bh_cb() */
@@ -85,8 +85,8 @@ index 45d14a25e9..08e1f0c3d7 100644
 -
      iocb = blk_aio_get(&trim_aiocb_info, s->blk, cb, cb_opaque);
      iocb->s = s;
-     iocb->bh = qemu_bh_new(ide_trim_bh_cb, iocb);
-@@ -740,8 +739,9 @@ void ide_cancel_dma_sync(IDEState *s)
+     iocb->bh = qemu_bh_new_guarded(ide_trim_bh_cb, iocb,
+@@ -754,8 +753,9 @@ void ide_cancel_dma_sync(IDEState *s)
       */
      if (s->bus->dma->aiocb) {
          trace_ide_cancel_dma_sync_remaining();

debian/patches/extra/0004-Revert-x86-acpi-workaround-Windows-not-handling-name.patch

@@ -0,0 +1,45 @@
+From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
+From: Fiona Ebner <f.ebner@proxmox.com>
+Date: Fri, 17 Nov 2023 11:18:06 +0100
+Subject: [PATCH] Revert "x86: acpi: workaround Windows not handling name
+ references in Package properly"
+
+This reverts commit 44d975ef340e2f21f236f9520c53e1b30d2213a4.
+
+As reported in the community forum [0] and reproduced locally this
+breaks VirtIO network adapters in (at least) the German ISO of Windows
+Server 2022. The fix itself was for
+
+> Issue is not fatal but as result acpi-index/"PCI Label ID" property
+> is either not shown in device details page or shows incorrect value.
+
+so revert and tolerate that as a stop-gap, rather than have the
+devices not working at all.
+
+[0]: https://forum.proxmox.com/threads/92094/post-605684
+
+Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
+---
+ hw/i386/acpi-build.c | 8 ++------
+ 1 file changed, 2 insertions(+), 6 deletions(-)
+
+diff --git a/hw/i386/acpi-build.c b/hw/i386/acpi-build.c
+index 53f804ac16..9b1b9f0412 100644
+--- a/hw/i386/acpi-build.c
++++ b/hw/i386/acpi-build.c
+@@ -347,13 +347,9 @@ Aml *aml_pci_device_dsm(void)
+     {
+         Aml *params = aml_local(0);
+         Aml *pkg = aml_package(2);
+-        aml_append(pkg, aml_int(0));
+-        aml_append(pkg, aml_int(0));
++        aml_append(pkg, aml_name("BSEL"));
++        aml_append(pkg, aml_name("ASUN"));
+         aml_append(method, aml_store(pkg, params));
+-        aml_append(method,
+-            aml_store(aml_name("BSEL"), aml_index(params, aml_int(0))));
+-        aml_append(method,
+-            aml_store(aml_name("ASUN"), aml_index(params, aml_int(1))));
+         aml_append(method,
+             aml_return(aml_call5("PDSM", aml_arg(0), aml_arg(1),
+                                  aml_arg(2), aml_arg(3), params))

debian/patches/extra/0004-ui-return-NULL-when-getting-cursor-without-a-console.patch

@@ -1,36 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Marc-Andr=C3=A9=20Lureau?= <marcandre.lureau@redhat.com>
-Date: Fri, 28 Apr 2023 19:48:06 +0400
-Subject: [PATCH] ui: return NULL when getting cursor without a console
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-VNC may try to get the current cursor even when there are no consoles
-and crashes. Simple reproducer is qemu with -nodefaults.
-
-Fixes: (again)
-https://gitlab.com/qemu-project/qemu/-/issues/1548
-
-Fixes: commit 385ac97f8 ("ui: keep current cursor with QemuConsole")
-Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
-Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
-(picked up from https://lists.nongnu.org/archive/html/qemu-devel/2023-04/msg05598.html)
-Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
----
- ui/console.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
-diff --git a/ui/console.c b/ui/console.c
-index e173731e20..7461446e71 100644
---- a/ui/console.c
-+++ b/ui/console.c
-@@ -2306,7 +2306,7 @@ QEMUCursor *qemu_console_get_cursor(QemuConsole *con)
-     if (con == NULL) {
-         con = active_console;
-     }
--    return con->cursor;
-+    return con ? con->cursor : NULL;
- }
- 
- bool qemu_console_is_visible(QemuConsole *con)

debian/patches/extra/0005-block-copy-before-write-use-uint64_t-for-timeout-in-.patch

@@ -0,0 +1,35 @@
+From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
+From: Fiona Ebner <f.ebner@proxmox.com>
+Date: Mon, 29 Apr 2024 15:41:11 +0200
+Subject: [PATCH] block/copy-before-write: use uint64_t for timeout in
+ nanoseconds
+
+rather than the uint32_t for which the maximum is slightly more than 4
+seconds and larger values would overflow. The QAPI interface allows
+specifying the number of seconds, so only values 0 to 4 are safe right
+now, other values lead to a much lower timeout than a user expects.
+
+The block_copy() call where this is used already takes a uint64_t for
+the timeout, so no change required there.
+
+Fixes: 6db7fd1ca9 ("block/copy-before-write: implement cbw-timeout option")
+Reported-by: Friedrich Weber <f.weber@proxmox.com>
+Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
+Tested-by: Friedrich Weber <f.weber@proxmox.com>
+---
+ block/copy-before-write.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/block/copy-before-write.c b/block/copy-before-write.c
+index 8aba27a71d..026fa9840f 100644
+--- a/block/copy-before-write.c
++++ b/block/copy-before-write.c
+@@ -43,7 +43,7 @@ typedef struct BDRVCopyBeforeWriteState {
+     BlockCopyState *bcs;
+     BdrvChild *target;
+     OnCbwError on_cbw_error;
+-    uint32_t cbw_timeout_ns;
++    uint64_t cbw_timeout_ns;
+ 
+     /*
+      * @lock: protects access to @access_bitmap, @done_bitmap and

debian/patches/extra/0005-memory-prevent-dma-reentracy-issues.patch

@@ -1,130 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Alexander Bulekov <alxndr@bu.edu>
-Date: Thu, 27 Apr 2023 17:10:06 -0400
-Subject: [PATCH] memory: prevent dma-reentracy issues
-
-Add a flag to the DeviceState, when a device is engaged in PIO/MMIO/DMA.
-This flag is set/checked prior to calling a device's MemoryRegion
-handlers, and set when device code initiates DMA.  The purpose of this
-flag is to prevent two types of DMA-based reentrancy issues:
-
-1.) mmio -> dma -> mmio case
-2.) bh -> dma write -> mmio case
-
-These issues have led to problems such as stack-exhaustion and
-use-after-frees.
-
-Summary of the problem from Peter Maydell:
-https://lore.kernel.org/qemu-devel/CAFEAcA_23vc7hE3iaM-JVA6W38LK4hJoWae5KcknhPRD5fPBZA@mail.gmail.com
-
-Resolves: https://gitlab.com/qemu-project/qemu/-/issues/62
-Resolves: https://gitlab.com/qemu-project/qemu/-/issues/540
-Resolves: https://gitlab.com/qemu-project/qemu/-/issues/541
-Resolves: https://gitlab.com/qemu-project/qemu/-/issues/556
-Resolves: https://gitlab.com/qemu-project/qemu/-/issues/557
-Resolves: https://gitlab.com/qemu-project/qemu/-/issues/827
-Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1282
-Resolves: CVE-2023-0330
-
-Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
-Reviewed-by: Thomas Huth <thuth@redhat.com>
-Message-Id: <20230427211013.2994127-2-alxndr@bu.edu>
-[thuth: Replace warn_report() with warn_report_once()]
-Signed-off-by: Thomas Huth <thuth@redhat.com>
-(cherry-picked from commit a2e1753b8054344f32cf94f31c6399a58794a380)
-Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
----
- include/exec/memory.h  |  5 +++++
- include/hw/qdev-core.h |  7 +++++++
- softmmu/memory.c       | 16 ++++++++++++++++
- 3 files changed, 28 insertions(+)
-
-diff --git a/include/exec/memory.h b/include/exec/memory.h
-index 15ade918ba..e45ce6061f 100644
---- a/include/exec/memory.h
-+++ b/include/exec/memory.h
-@@ -767,6 +767,8 @@ struct MemoryRegion {
-     bool is_iommu;
-     RAMBlock *ram_block;
-     Object *owner;
-+    /* owner as TYPE_DEVICE. Used for re-entrancy checks in MR access hotpath */
-+    DeviceState *dev;
- 
-     const MemoryRegionOps *ops;
-     void *opaque;
-@@ -791,6 +793,9 @@ struct MemoryRegion {
-     unsigned ioeventfd_nb;
-     MemoryRegionIoeventfd *ioeventfds;
-     RamDiscardManager *rdm; /* Only for RAM */
-+
-+    /* For devices designed to perform re-entrant IO into their own IO MRs */
-+    bool disable_reentrancy_guard;
- };
- 
- struct IOMMUMemoryRegion {
-diff --git a/include/hw/qdev-core.h b/include/hw/qdev-core.h
-index bd50ad5ee1..7623703943 100644
---- a/include/hw/qdev-core.h
-+++ b/include/hw/qdev-core.h
-@@ -162,6 +162,10 @@ struct NamedClockList {
-     QLIST_ENTRY(NamedClockList) node;
- };
- 
-+typedef struct {
-+    bool engaged_in_io;
-+} MemReentrancyGuard;
-+
- /**
-  * DeviceState:
-  * @realized: Indicates whether the device has been fully constructed.
-@@ -194,6 +198,9 @@ struct DeviceState {
-     int alias_required_for_version;
-     ResettableState reset;
-     GSList *unplug_blockers;
-+
-+    /* Is the device currently in mmio/pio/dma? Used to prevent re-entrancy */
-+    MemReentrancyGuard mem_reentrancy_guard;
- };
- 
- struct DeviceListener {
-diff --git a/softmmu/memory.c b/softmmu/memory.c
-index b1a6cae6f5..b7b3386e9d 100644
---- a/softmmu/memory.c
-+++ b/softmmu/memory.c
-@@ -542,6 +542,18 @@ static MemTxResult access_with_adjusted_size(hwaddr addr,
-         access_size_max = 4;
-     }
- 
-+    /* Do not allow more than one simultaneous access to a device's IO Regions */
-+    if (mr->dev && !mr->disable_reentrancy_guard &&
-+        !mr->ram_device && !mr->ram && !mr->rom_device && !mr->readonly) {
-+        if (mr->dev->mem_reentrancy_guard.engaged_in_io) {
-+            warn_report_once("Blocked re-entrant IO on MemoryRegion: "
-+                             "%s at addr: 0x%" HWADDR_PRIX,
-+                             memory_region_name(mr), addr);
-+            return MEMTX_ACCESS_ERROR;
-+        }
-+        mr->dev->mem_reentrancy_guard.engaged_in_io = true;
-+    }
-+
-     /* FIXME: support unaligned access? */
-     access_size = MAX(MIN(size, access_size_max), access_size_min);
-     access_mask = MAKE_64BIT_MASK(0, access_size * 8);
-@@ -556,6 +568,9 @@ static MemTxResult access_with_adjusted_size(hwaddr addr,
-                         access_mask, attrs);
-         }
-     }
-+    if (mr->dev) {
-+        mr->dev->mem_reentrancy_guard.engaged_in_io = false;
-+    }
-     return r;
- }
- 
-@@ -1170,6 +1185,7 @@ static void memory_region_do_init(MemoryRegion *mr,
-     }
-     mr->name = g_strdup(name);
-     mr->owner = owner;
-+    mr->dev = (DeviceState *) object_dynamic_cast(mr->owner, TYPE_DEVICE);
-     mr->ram_block = NULL;
- 
-     if (name) {

debian/patches/extra/0006-lsi53c895a-disable-reentrancy-detection-for-script-R.patch

@@ -1,39 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Alexander Bulekov <alxndr@bu.edu>
-Date: Thu, 27 Apr 2023 17:10:10 -0400
-Subject: [PATCH] lsi53c895a: disable reentrancy detection for script RAM
-
-As the code is designed to use the memory APIs to access the script ram,
-disable reentrancy checks for the pseudo-RAM ram_io MemoryRegion.
-
-In the future, ram_io may be converted from an IO to a proper RAM MemoryRegion.
-
-Reported-by: Fiona Ebner <f.ebner@proxmox.com>
-Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
-Reviewed-by: Thomas Huth <thuth@redhat.com>
-Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
-Message-Id: <20230427211013.2994127-6-alxndr@bu.edu>
-Signed-off-by: Thomas Huth <thuth@redhat.com>
-(cherry-picked from commit bfd6e7ae6a72b84e2eb9574f56e6ec037f05182c)
-Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
----
- hw/scsi/lsi53c895a.c | 6 ++++++
- 1 file changed, 6 insertions(+)
-
-diff --git a/hw/scsi/lsi53c895a.c b/hw/scsi/lsi53c895a.c
-index bbf32d3f73..17af67935f 100644
---- a/hw/scsi/lsi53c895a.c
-+++ b/hw/scsi/lsi53c895a.c
-@@ -2313,6 +2313,12 @@ static void lsi_scsi_realize(PCIDevice *dev, Error **errp)
-     memory_region_init_io(&s->io_io, OBJECT(s), &lsi_io_ops, s,
-                           "lsi-io", 256);
- 
-+    /*
-+     * Since we use the address-space API to interact with ram_io, disable the
-+     * re-entrancy guard.
-+     */
-+    s->ram_io.disable_reentrancy_guard = true;
-+
-     address_space_init(&s->pci_io_as, pci_address_space_io(dev), "lsi-pci-io");
-     qdev_init_gpio_out(d, &s->ext_irq, 1);
- 

debian/patches/extra/0006-virtio-gpu-fix-v2-migration.patch

@@ -0,0 +1,98 @@
+From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Marc-Andr=C3=A9=20Lureau?= <marcandre.lureau@redhat.com>
+Date: Thu, 16 May 2024 12:40:22 +0400
+Subject: [PATCH] virtio-gpu: fix v2 migration
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Commit dfcf74fa ("virtio-gpu: fix scanout migration post-load") broke
+forward/backward version migration. Versioning of nested VMSD structures
+is not straightforward, as the wire format doesn't have nested
+structures versions. Introduce x-scanout-vmstate-version and a field
+test to save/load appropriately according to the machine version.
+
+Fixes: dfcf74fa ("virtio-gpu: fix scanout migration post-load")
+Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
+Signed-off-by: Peter Xu <peterx@redhat.com>
+---
+ hw/core/machine.c              |  1 +
+ hw/display/virtio-gpu.c        | 24 ++++++++++++++++--------
+ include/hw/virtio/virtio-gpu.h |  1 +
+ 3 files changed, 18 insertions(+), 8 deletions(-)
+
+diff --git a/hw/core/machine.c b/hw/core/machine.c
+index 37ede0e7d4..d33a37a6f6 100644
+--- a/hw/core/machine.c
++++ b/hw/core/machine.c
+@@ -37,6 +37,7 @@ GlobalProperty hw_compat_8_2[] = {
+     { "migration", "zero-page-detection", "legacy"},
+     { TYPE_VIRTIO_IOMMU_PCI, "granule", "4k" },
+     { TYPE_VIRTIO_IOMMU_PCI, "aw-bits", "64" },
++    { "virtio-gpu-device", "x-scanout-vmstate-version", "1" },
+ };
+ const size_t hw_compat_8_2_len = G_N_ELEMENTS(hw_compat_8_2);
+ 
+diff --git a/hw/display/virtio-gpu.c b/hw/display/virtio-gpu.c
+index ae831b6b3e..85323daf99 100644
+--- a/hw/display/virtio-gpu.c
++++ b/hw/display/virtio-gpu.c
+@@ -1166,10 +1166,17 @@ static void virtio_gpu_cursor_bh(void *opaque)
+     virtio_gpu_handle_cursor(&g->parent_obj.parent_obj, g->cursor_vq);
+ }
+ 
++static bool scanout_vmstate_after_v2(void *opaque, int version)
++{
++    struct VirtIOGPUBase *base = container_of(opaque, VirtIOGPUBase, scanout);
++    struct VirtIOGPU *gpu = container_of(base, VirtIOGPU, parent_obj);
++
++    return gpu->scanout_vmstate_version >= 2;
++}
++
+ static const VMStateDescription vmstate_virtio_gpu_scanout = {
+     .name = "virtio-gpu-one-scanout",
+-    .version_id = 2,
+-    .minimum_version_id = 1,
++    .version_id = 1,
+     .fields = (const VMStateField[]) {
+         VMSTATE_UINT32(resource_id, struct virtio_gpu_scanout),
+         VMSTATE_UINT32(width, struct virtio_gpu_scanout),
+@@ -1181,12 +1188,12 @@ static const VMStateDescription vmstate_virtio_gpu_scanout = {
+         VMSTATE_UINT32(cursor.hot_y, struct virtio_gpu_scanout),
+         VMSTATE_UINT32(cursor.pos.x, struct virtio_gpu_scanout),
+         VMSTATE_UINT32(cursor.pos.y, struct virtio_gpu_scanout),
+-        VMSTATE_UINT32_V(fb.format, struct virtio_gpu_scanout, 2),
+-        VMSTATE_UINT32_V(fb.bytes_pp, struct virtio_gpu_scanout, 2),
+-        VMSTATE_UINT32_V(fb.width, struct virtio_gpu_scanout, 2),
+-        VMSTATE_UINT32_V(fb.height, struct virtio_gpu_scanout, 2),
+-        VMSTATE_UINT32_V(fb.stride, struct virtio_gpu_scanout, 2),
+-        VMSTATE_UINT32_V(fb.offset, struct virtio_gpu_scanout, 2),
++        VMSTATE_UINT32_TEST(fb.format, struct virtio_gpu_scanout, scanout_vmstate_after_v2),
++        VMSTATE_UINT32_TEST(fb.bytes_pp, struct virtio_gpu_scanout, scanout_vmstate_after_v2),
++        VMSTATE_UINT32_TEST(fb.width, struct virtio_gpu_scanout, scanout_vmstate_after_v2),
++        VMSTATE_UINT32_TEST(fb.height, struct virtio_gpu_scanout, scanout_vmstate_after_v2),
++        VMSTATE_UINT32_TEST(fb.stride, struct virtio_gpu_scanout, scanout_vmstate_after_v2),
++        VMSTATE_UINT32_TEST(fb.offset, struct virtio_gpu_scanout, scanout_vmstate_after_v2),
+         VMSTATE_END_OF_LIST()
+     },
+ };
+@@ -1659,6 +1666,7 @@ static Property virtio_gpu_properties[] = {
+     DEFINE_PROP_BIT("blob", VirtIOGPU, parent_obj.conf.flags,
+                     VIRTIO_GPU_FLAG_BLOB_ENABLED, false),
+     DEFINE_PROP_SIZE("hostmem", VirtIOGPU, parent_obj.conf.hostmem, 0),
++    DEFINE_PROP_UINT8("x-scanout-vmstate-version", VirtIOGPU, scanout_vmstate_version, 2),
+     DEFINE_PROP_END_OF_LIST(),
+ };
+ 
+diff --git a/include/hw/virtio/virtio-gpu.h b/include/hw/virtio/virtio-gpu.h
+index ed44cdad6b..842315d51d 100644
+--- a/include/hw/virtio/virtio-gpu.h
++++ b/include/hw/virtio/virtio-gpu.h
+@@ -177,6 +177,7 @@ typedef struct VGPUDMABuf {
+ struct VirtIOGPU {
+     VirtIOGPUBase parent_obj;
+ 
++    uint8_t scanout_vmstate_version;
+     uint64_t conf_max_hostmem;
+ 
+     VirtQueue *ctrl_vq;

debian/patches/extra/0007-bcm2835_property-disable-reentrancy-detection-for-io.patch

@@ -1,37 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Alexander Bulekov <alxndr@bu.edu>
-Date: Thu, 27 Apr 2023 17:10:11 -0400
-Subject: [PATCH] bcm2835_property: disable reentrancy detection for iomem
-
-As the code is designed for re-entrant calls from bcm2835_property to
-bcm2835_mbox and back into bcm2835_property, mark iomem as
-reentrancy-safe.
-
-Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
-Reviewed-by: Thomas Huth <thuth@redhat.com>
-Message-Id: <20230427211013.2994127-7-alxndr@bu.edu>
-Signed-off-by: Thomas Huth <thuth@redhat.com>
-(cherry-picked from commit 985c4a4e547afb9573b6bd6843d20eb2c3d1d1cd)
-Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
----
- hw/misc/bcm2835_property.c | 7 +++++++
- 1 file changed, 7 insertions(+)
-
-diff --git a/hw/misc/bcm2835_property.c b/hw/misc/bcm2835_property.c
-index 890ae7bae5..de056ea2df 100644
---- a/hw/misc/bcm2835_property.c
-+++ b/hw/misc/bcm2835_property.c
-@@ -382,6 +382,13 @@ static void bcm2835_property_init(Object *obj)
- 
-     memory_region_init_io(&s->iomem, OBJECT(s), &bcm2835_property_ops, s,
-                           TYPE_BCM2835_PROPERTY, 0x10);
-+
-+    /*
-+     * bcm2835_property_ops call into bcm2835_mbox, which in-turn reads from
-+     * iomem. As such, mark iomem as re-entracy safe.
-+     */
-+    s->iomem.disable_reentrancy_guard = true;
-+
-     sysbus_init_mmio(SYS_BUS_DEVICE(s), &s->iomem);
-     sysbus_init_irq(SYS_BUS_DEVICE(s), &s->mbox_irq);
- }

debian/patches/extra/0007-hw-pflash-fix-block-write-start.patch

@@ -0,0 +1,59 @@
+From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
+From: Gerd Hoffmann <kraxel@redhat.com>
+Date: Thu, 16 May 2024 10:46:34 +0200
+Subject: [PATCH] hw/pflash: fix block write start
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Move the pflash_blk_write_start() call.  We need the offset of the
+first data write, not the offset for the setup (number-of-bytes)
+write.  Without this fix u-boot can do block writes to the first
+flash block only.
+
+While being at it drop a leftover FIXME.
+
+Cc: qemu-stable@nongnu.org
+Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2343
+Fixes: fcc79f2e0955 ("hw/pflash: implement update buffer for block writes")
+Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
+Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
+(picked up from https://lists.nongnu.org/archive/html/qemu-stable/2024-05/msg00091.html)
+Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
+---
+ hw/block/pflash_cfi01.c | 8 +++-----
+ 1 file changed, 3 insertions(+), 5 deletions(-)
+
+diff --git a/hw/block/pflash_cfi01.c b/hw/block/pflash_cfi01.c
+index 1bda8424b9..c8f1cf5a87 100644
+--- a/hw/block/pflash_cfi01.c
++++ b/hw/block/pflash_cfi01.c
+@@ -518,10 +518,6 @@ static void pflash_write(PFlashCFI01 *pfl, hwaddr offset,
+             break;
+         case 0xe8: /* Write to buffer */
+             trace_pflash_write(pfl->name, "write to buffer");
+-            /* FIXME should save @offset, @width for case 1+ */
+-            qemu_log_mask(LOG_UNIMP,
+-                          "%s: Write to buffer emulation is flawed\n",
+-                          __func__);
+             pfl->status |= 0x80; /* Ready! */
+             break;
+         case 0xf0: /* Probe for AMD flash */
+@@ -574,7 +570,6 @@ static void pflash_write(PFlashCFI01 *pfl, hwaddr offset,
+             }
+             pfl->counter = value;
+             pfl->wcycle++;
+-            pflash_blk_write_start(pfl, offset);
+             break;
+         case 0x60:
+             if (cmd == 0xd0) {
+@@ -605,6 +600,9 @@ static void pflash_write(PFlashCFI01 *pfl, hwaddr offset,
+         switch (pfl->cmd) {
+         case 0xe8: /* Block write */
+             /* FIXME check @offset, @width */
++            if (pfl->blk_offset == -1 && pfl->counter) {
++                pflash_blk_write_start(pfl, offset);
++            }
+             if (!pfl->ro && (pfl->blk_offset != -1)) {
+                 pflash_data_write(pfl, offset, value, width, be);
+             } else {

debian/patches/extra/0008-raven-disable-reentrancy-detection-for-iomem.patch

@@ -1,35 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Alexander Bulekov <alxndr@bu.edu>
-Date: Thu, 27 Apr 2023 17:10:12 -0400
-Subject: [PATCH] raven: disable reentrancy detection for iomem
-
-As the code is designed for re-entrant calls from raven_io_ops to
-pci-conf, mark raven_io_ops as reentrancy-safe.
-
-Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
-Message-Id: <20230427211013.2994127-8-alxndr@bu.edu>
-Signed-off-by: Thomas Huth <thuth@redhat.com>
-(cherry-picked from commit 6dad5a6810d9c60ca320d01276f6133bbcfa1fc7)
-Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
----
- hw/pci-host/raven.c | 7 +++++++
- 1 file changed, 7 insertions(+)
-
-diff --git a/hw/pci-host/raven.c b/hw/pci-host/raven.c
-index 072ffe3c5e..9a11ac4b2b 100644
---- a/hw/pci-host/raven.c
-+++ b/hw/pci-host/raven.c
-@@ -294,6 +294,13 @@ static void raven_pcihost_initfn(Object *obj)
-     memory_region_init(&s->pci_memory, obj, "pci-memory", 0x3f000000);
-     address_space_init(&s->pci_io_as, &s->pci_io, "raven-io");
- 
-+    /*
-+     * Raven's raven_io_ops use the address-space API to access pci-conf-idx
-+     * (which is also owned by the raven device). As such, mark the
-+     * pci_io_non_contiguous as re-entrancy safe.
-+     */
-+    s->pci_io_non_contiguous.disable_reentrancy_guard = true;
-+
-     /* CPU address space */
-     memory_region_add_subregion(address_space_mem, PCI_IO_BASE_ADDR,
-                                 &s->pci_io);

debian/patches/extra/0008-target-i386-fix-operand-size-for-DATA16-REX.W-POPCNT.patch

@@ -0,0 +1,51 @@
+From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
+From: Paolo Bonzini <pbonzini@redhat.com>
+Date: Thu, 9 May 2024 12:38:10 +0200
+Subject: [PATCH] target/i386: fix operand size for DATA16 REX.W POPCNT
+
+According to the manual, 32-bit vs 64-bit is governed by REX.W
+and REX ignores the 0x66 prefix.  This can be confirmed with this
+program:
+
+    #include <stdio.h>
+    int main()
+    {
+       int x = 0x12340000;
+       int y;
+       asm("popcntl %1, %0" : "=r" (y) : "r" (x)); printf("%x\n", y);
+       asm("mov $-1, %0; .byte 0x66; popcntl %1, %0" : "+r" (y) : "r" (x)); printf("%x\n", y);
+       asm("mov $-1, %0; .byte 0x66; popcntq %q1, %q0" : "+r" (y) : "r" (x)); printf("%x\n", y);
+    }
+
+which prints 5/ffff0000/5 on real hardware and 5/ffff0000/ffff0000
+on QEMU.
+
+Cc: qemu-stable@nongnu.org
+Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
+Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
+Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
+(cherry picked from commit 41c685dc59bb611096f3bb6a663cfa82e4cba97b)
+[FE: keep mo_64_32 helper which still has other users in 9.0.0]
+Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
+---
+ target/i386/tcg/translate.c | 7 +------
+ 1 file changed, 1 insertion(+), 6 deletions(-)
+
+diff --git a/target/i386/tcg/translate.c b/target/i386/tcg/translate.c
+index 76a42c679c..b60f3bd642 100644
+--- a/target/i386/tcg/translate.c
++++ b/target/i386/tcg/translate.c
+@@ -6799,12 +6799,7 @@ static bool disas_insn(DisasContext *s, CPUState *cpu)
+         modrm = x86_ldub_code(env, s);
+         reg = ((modrm >> 3) & 7) | REX_R(s);
+ 
+-        if (s->prefix & PREFIX_DATA) {
+-            ot = MO_16;
+-        } else {
+-            ot = mo_64_32(dflag);
+-        }
+-
++        ot = dflag;
+         gen_ldst_modrm(env, s, modrm, ot, OR_TMP0, 0);
+         gen_extu(ot, s->T0);
+         tcg_gen_mov_tl(cpu_cc_src, s->T0);

debian/patches/extra/0009-apic-disable-reentrancy-detection-for-apic-msi.patch

@@ -1,36 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Alexander Bulekov <alxndr@bu.edu>
-Date: Thu, 27 Apr 2023 17:10:13 -0400
-Subject: [PATCH] apic: disable reentrancy detection for apic-msi
-
-As the code is designed for re-entrant calls to apic-msi, mark apic-msi
-as reentrancy-safe.
-
-Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
-Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
-Message-Id: <20230427211013.2994127-9-alxndr@bu.edu>
-Signed-off-by: Thomas Huth <thuth@redhat.com>
-(cherry-picked from commit 50795ee051a342c681a9b45671c552fbd6274db8)
-Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
----
- hw/intc/apic.c | 7 +++++++
- 1 file changed, 7 insertions(+)
-
-diff --git a/hw/intc/apic.c b/hw/intc/apic.c
-index 20b5a94073..ac3d47d231 100644
---- a/hw/intc/apic.c
-+++ b/hw/intc/apic.c
-@@ -885,6 +885,13 @@ static void apic_realize(DeviceState *dev, Error **errp)
-     memory_region_init_io(&s->io_memory, OBJECT(s), &apic_io_ops, s, "apic-msi",
-                           APIC_SPACE_SIZE);
- 
-+    /*
-+     * apic-msi's apic_mem_write can call into ioapic_eoi_broadcast, which can
-+     * write back to apic-msi. As such mark the apic-msi region re-entrancy
-+     * safe.
-+     */
-+    s->io_memory.disable_reentrancy_guard = true;
-+
-     s->timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, apic_timer, s);
-     local_apics[s->id] = s;
- 

debian/patches/extra/0009-target-i386-rdpkru-wrpkru-are-no-prefix-instructions.patch

@@ -0,0 +1,40 @@
+From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
+From: Paolo Bonzini <pbonzini@redhat.com>
+Date: Thu, 9 May 2024 15:55:47 +0200
+Subject: [PATCH] target/i386: rdpkru/wrpkru are no-prefix instructions
+
+Reject 0x66/0xf3/0xf2 in front of them.
+
+Cc: qemu-stable@nongnu.org
+Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
+Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
+(cherry picked from commit 40a3ec7b5ffde500789d016660a171057d6b467c)
+Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
+---
+ target/i386/tcg/translate.c | 6 ++++--
+ 1 file changed, 4 insertions(+), 2 deletions(-)
+
+diff --git a/target/i386/tcg/translate.c b/target/i386/tcg/translate.c
+index b60f3bd642..3e949fe964 100644
+--- a/target/i386/tcg/translate.c
++++ b/target/i386/tcg/translate.c
+@@ -6083,7 +6083,8 @@ static bool disas_insn(DisasContext *s, CPUState *cpu)
+             gen_ldst_modrm(env, s, modrm, ot, OR_TMP0, 1);
+             break;
+         case 0xee: /* rdpkru */
+-            if (prefixes & PREFIX_LOCK) {
++            if (s->prefix & (PREFIX_LOCK | PREFIX_DATA
++                             | PREFIX_REPZ | PREFIX_REPNZ)) {
+                 goto illegal_op;
+             }
+             tcg_gen_trunc_tl_i32(s->tmp2_i32, cpu_regs[R_ECX]);
+@@ -6091,7 +6092,8 @@ static bool disas_insn(DisasContext *s, CPUState *cpu)
+             tcg_gen_extr_i64_tl(cpu_regs[R_EAX], cpu_regs[R_EDX], s->tmp1_i64);
+             break;
+         case 0xef: /* wrpkru */
+-            if (prefixes & PREFIX_LOCK) {
++            if (s->prefix & (PREFIX_LOCK | PREFIX_DATA
++                             | PREFIX_REPZ | PREFIX_REPNZ)) {
+                 goto illegal_op;
+             }
+             tcg_gen_concat_tl_i64(s->tmp1_i64, cpu_regs[R_EAX],

debian/patches/extra/0010-target-i386-fix-feature-dependency-for-WAITPKG.patch

@@ -0,0 +1,33 @@
+From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
+From: Paolo Bonzini <pbonzini@redhat.com>
+Date: Wed, 8 May 2024 11:10:54 +0200
+Subject: [PATCH] target/i386: fix feature dependency for WAITPKG
+
+The VMX feature bit depends on general availability of WAITPKG,
+not the other way round.
+
+Fixes: 33cc88261c3 ("target/i386: add support for VMX_SECONDARY_EXEC_ENABLE_USER_WAIT_PAUSE", 2023-08-28)
+Cc: qemu-stable@nongnu.org
+Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
+Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
+(cherry picked from commit fe01af5d47d4cf7fdf90c54d43f784e5068c8d72)
+Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
+---
+ target/i386/cpu.c | 4 ++--
+ 1 file changed, 2 insertions(+), 2 deletions(-)
+
+diff --git a/target/i386/cpu.c b/target/i386/cpu.c
+index 33760a2ee1..e693f8ca9a 100644
+--- a/target/i386/cpu.c
++++ b/target/i386/cpu.c
+@@ -1550,8 +1550,8 @@ static FeatureDep feature_dependencies[] = {
+         .to = { FEAT_SVM,                   ~0ull },
+     },
+     {
+-        .from = { FEAT_VMX_SECONDARY_CTLS,  VMX_SECONDARY_EXEC_ENABLE_USER_WAIT_PAUSE },
+-        .to = { FEAT_7_0_ECX,               CPUID_7_0_ECX_WAITPKG },
++        .from = { FEAT_7_0_ECX,             CPUID_7_0_ECX_WAITPKG },
++        .to = { FEAT_VMX_SECONDARY_CTLS,    VMX_SECONDARY_EXEC_ENABLE_USER_WAIT_PAUSE },
+     },
+ };
+ 

debian/patches/extra/0011-Revert-virtio-pci-fix-use-of-a-released-vector.patch

@@ -0,0 +1,87 @@
+From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
+From: Fiona Ebner <f.ebner@proxmox.com>
+Date: Thu, 16 May 2024 12:59:52 +0200
+Subject: [PATCH] Revert "virtio-pci: fix use of a released vector"
+
+This reverts commit 2ce6cff94df2650c460f809e5ad263f1d22507c0.
+
+The fix causes some issues:
+https://gitlab.com/qemu-project/qemu/-/issues/2321
+https://gitlab.com/qemu-project/qemu/-/issues/2334
+
+The CVE fixed by commit 2ce6cff94d ("virtio-pci: fix use of a released
+vector") is CVE-2024-4693 [0] and allows a malicious guest that
+controls the boot process in the guest to crash its QEMU process.
+
+The issues sound worse than the CVE, so revert until there is a proper
+fix.
+
+[0]: https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2024-4693
+
+Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
+---
+ hw/virtio/virtio-pci.c | 37 ++-----------------------------------
+ 1 file changed, 2 insertions(+), 35 deletions(-)
+
+diff --git a/hw/virtio/virtio-pci.c b/hw/virtio/virtio-pci.c
+index cb159fd078..cb6940fc0e 100644
+--- a/hw/virtio/virtio-pci.c
++++ b/hw/virtio/virtio-pci.c
+@@ -1424,38 +1424,6 @@ static int virtio_pci_add_mem_cap(VirtIOPCIProxy *proxy,
+     return offset;
+ }
+ 
+-static void virtio_pci_set_vector(VirtIODevice *vdev,
+-                                  VirtIOPCIProxy *proxy,
+-                                  int queue_no, uint16_t old_vector,
+-                                  uint16_t new_vector)
+-{
+-    bool kvm_irqfd = (vdev->status & VIRTIO_CONFIG_S_DRIVER_OK) &&
+-        msix_enabled(&proxy->pci_dev) && kvm_msi_via_irqfd_enabled();
+-
+-    if (new_vector == old_vector) {
+-        return;
+-    }
+-
+-    /*
+-     * If the device uses irqfd and the vector changes after DRIVER_OK is
+-     * set, we need to release the old vector and set up the new one.
+-     * Otherwise just need to set the new vector on the device.
+-     */
+-    if (kvm_irqfd && old_vector != VIRTIO_NO_VECTOR) {
+-        kvm_virtio_pci_vector_release_one(proxy, queue_no);
+-    }
+-    /* Set the new vector on the device. */
+-    if (queue_no == VIRTIO_CONFIG_IRQ_IDX) {
+-        vdev->config_vector = new_vector;
+-    } else {
+-        virtio_queue_set_vector(vdev, queue_no, new_vector);
+-    }
+-    /* If the new vector changed need to set it up. */
+-    if (kvm_irqfd && new_vector != VIRTIO_NO_VECTOR) {
+-        kvm_virtio_pci_vector_use_one(proxy, queue_no);
+-    }
+-}
+-
+ int virtio_pci_add_shm_cap(VirtIOPCIProxy *proxy,
+                            uint8_t bar, uint64_t offset, uint64_t length,
+                            uint8_t id)
+@@ -1602,8 +1570,7 @@ static void virtio_pci_common_write(void *opaque, hwaddr addr,
+         } else {
+             val = VIRTIO_NO_VECTOR;
+         }
+-        virtio_pci_set_vector(vdev, proxy, VIRTIO_CONFIG_IRQ_IDX,
+-                              vdev->config_vector, val);
++        vdev->config_vector = val;
+         break;
+     case VIRTIO_PCI_COMMON_STATUS:
+         if (!(val & VIRTIO_CONFIG_S_DRIVER_OK)) {
+@@ -1643,7 +1610,7 @@ static void virtio_pci_common_write(void *opaque, hwaddr addr,
+         } else {
+             val = VIRTIO_NO_VECTOR;
+         }
+-        virtio_pci_set_vector(vdev, proxy, vdev->queue_sel, vector, val);
++        virtio_queue_set_vector(vdev, vdev->queue_sel, val);
+         break;
+     case VIRTIO_PCI_COMMON_Q_ENABLE:
+         if (val == 1) {

debian/patches/extra/0012-hw-core-machine-move-compatibility-flags-for-VirtIO-.patch

@@ -0,0 +1,57 @@
+From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
+From: Fiona Ebner <f.ebner@proxmox.com>
+Date: Thu, 16 May 2024 15:21:07 +0200
+Subject: [PATCH] hw/core/machine: move compatibility flags for VirtIO-net USO
+ to machine 8.1
+
+Migration from an 8.2 or 9.0 binary to an 8.1 binary with machine
+version 8.1 can fail with:
+
+> kvm: Features 0x1c0010130afffa7 unsupported. Allowed features: 0x10179bfffe7
+> kvm: Failed to load virtio-net:virtio
+> kvm: error while loading state for instance 0x0 of device '0000:00:12.0/virtio-net'
+> kvm: load of migration failed: Operation not permitted
+
+The series
+
+53da8b5a99 virtio-net: Add support for USO features
+9da1684954 virtio-net: Add USO flags to vhost support.
+f03e0cf63b tap: Add check for USO features
+2ab0ec3121 tap: Add USO support to tap device.
+
+only landed in QEMU 8.2, so the compatibility flags should be part of
+machine version 8.1.
+
+Moving the flags unfortunately breaks forward migration with machine
+version 8.1 from a binary without this patch to a binary with this
+patch when the feature is enabled by the guest.
+
+Fixes: 53da8b5a99 ("virtio-net: Add support for USO features")
+Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
+---
+ hw/core/machine.c | 6 +++---
+ 1 file changed, 3 insertions(+), 3 deletions(-)
+
+diff --git a/hw/core/machine.c b/hw/core/machine.c
+index d33a37a6f6..4273de16a0 100644
+--- a/hw/core/machine.c
++++ b/hw/core/machine.c
+@@ -46,15 +46,15 @@ GlobalProperty hw_compat_8_1[] = {
+     { "ramfb", "x-migrate", "off" },
+     { "vfio-pci-nohotplug", "x-ramfb-migrate", "off" },
+     { "igb", "x-pcie-flr-init", "off" },
++    { TYPE_VIRTIO_NET, "host_uso", "off"},
++    { TYPE_VIRTIO_NET, "guest_uso4", "off"},
++    { TYPE_VIRTIO_NET, "guest_uso6", "off"},
+ };
+ const size_t hw_compat_8_1_len = G_N_ELEMENTS(hw_compat_8_1);
+ 
+ GlobalProperty hw_compat_8_0[] = {
+     { "migration", "multifd-flush-after-each-section", "on"},
+     { TYPE_PCI_DEVICE, "x-pcie-ari-nextfn-1", "on" },
+-    { TYPE_VIRTIO_NET, "host_uso", "off"},
+-    { TYPE_VIRTIO_NET, "guest_uso4", "off"},
+-    { TYPE_VIRTIO_NET, "guest_uso6", "off"},
+ };
+ const size_t hw_compat_8_0_len = G_N_ELEMENTS(hw_compat_8_0);
+ 

debian/patches/pve/0001-PVE-Config-block-file-change-locking-default-to-off.patch

@@ -14,10 +14,10 @@ Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
  1 file changed, 2 insertions(+), 2 deletions(-)
 
 diff --git a/block/file-posix.c b/block/file-posix.c
-index c2dee3f056..9681bd0434 100644
+index 35684f7e21..43bc0bd520 100644
 --- a/block/file-posix.c
 +++ b/block/file-posix.c
-@@ -553,7 +553,7 @@ static QemuOptsList raw_runtime_opts = {
+@@ -563,7 +563,7 @@ static QemuOptsList raw_runtime_opts = {
          {
              .name = "locking",
              .type = QEMU_OPT_STRING,
@@ -26,7 +26,7 @@ index c2dee3f056..9681bd0434 100644
          },
          {
              .name = "pr-manager",
-@@ -653,7 +653,7 @@ static int raw_open_common(BlockDriverState *bs, QDict *options,
+@@ -663,7 +663,7 @@ static int raw_open_common(BlockDriverState *bs, QDict *options,
          s->use_lock = false;
          break;
      case ON_OFF_AUTO_AUTO:

debian/patches/pve/0002-PVE-Config-Adjust-network-script-path-to-etc-kvm.patch

@@ -9,10 +9,10 @@ Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
  1 file changed, 2 insertions(+), 2 deletions(-)
 
 diff --git a/include/net/net.h b/include/net/net.h
-index 1448d00afb..d1601d32c1 100644
+index b1f9b35fcc..096c0d52e4 100644
 --- a/include/net/net.h
 +++ b/include/net/net.h
-@@ -258,8 +258,8 @@ void netdev_add(QemuOpts *opts, Error **errp);
+@@ -317,8 +317,8 @@ void netdev_add(QemuOpts *opts, Error **errp);
  int net_hub_id_for_client(NetClientState *nc, int *id);
  NetClientState *net_hub_port_find(int hub_id);
  

debian/patches/pve/0003-PVE-Config-set-the-CPU-model-to-kvm64-32-instead-of-.patch

@@ -10,10 +10,10 @@ Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
  1 file changed, 2 insertions(+), 2 deletions(-)
 
 diff --git a/target/i386/cpu.h b/target/i386/cpu.h
-index d243e290d3..3489b05ec4 100644
+index 6b05738079..d82869900a 100644
 --- a/target/i386/cpu.h
 +++ b/target/i386/cpu.h
-@@ -2203,9 +2203,9 @@ uint64_t cpu_get_tsc(CPUX86State *env);
+@@ -2291,9 +2291,9 @@ uint64_t cpu_get_tsc(CPUX86State *env);
  #define CPU_RESOLVING_TYPE TYPE_X86_CPU
  
  #ifdef TARGET_X86_64

debian/patches/pve/0004-PVE-Config-ui-spice-default-to-pve-certificates.patch

@@ -9,10 +9,10 @@ Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
  1 file changed, 9 insertions(+), 6 deletions(-)
 
 diff --git a/ui/spice-core.c b/ui/spice-core.c
-index 52a59386d7..b20c25aee0 100644
+index 15be640286..ea20e6153c 100644
 --- a/ui/spice-core.c
 +++ b/ui/spice-core.c
-@@ -691,32 +691,35 @@ static void qemu_spice_init(void)
+@@ -690,32 +690,35 @@ static void qemu_spice_init(void)
  
      if (tls_port) {
          x509_dir = qemu_opt_get(opts, "x509-dir");

debian/patches/pve/0005-PVE-Config-glusterfs-no-default-logfile-if-daemonize.patch

@@ -9,7 +9,7 @@ Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
  1 file changed, 11 insertions(+), 4 deletions(-)
 
 diff --git a/block/gluster.c b/block/gluster.c
-index 185a83e5e5..f11a40aa9e 100644
+index cc74af06dc..3ba9bbfa5e 100644
 --- a/block/gluster.c
 +++ b/block/gluster.c
 @@ -43,7 +43,7 @@
@@ -24,7 +24,7 @@ index 185a83e5e5..f11a40aa9e 100644
 @@ -425,6 +425,7 @@ static struct glfs *qemu_gluster_glfs_init(BlockdevOptionsGluster *gconf,
      int old_errno;
      SocketAddressList *server;
-     unsigned long long port;
+     uint64_t port;
 +    const char *logfile;
  
      glfs = glfs_find_preopened(gconf->volume);

debian/patches/pve/0006-PVE-Config-rbd-block-rbd-disable-rbd_cache_writethro.patch

@@ -18,7 +18,7 @@ Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
  1 file changed, 2 insertions(+)
 
 diff --git a/block/rbd.c b/block/rbd.c
-index 978671411e..a4749f3b1b 100644
+index 84bb2fa5d7..63f60d41be 100644
 --- a/block/rbd.c
 +++ b/block/rbd.c
 @@ -963,6 +963,8 @@ static int qemu_rbd_connect(rados_t *cluster, rados_ioctx_t *io_ctx,

debian/patches/pve/0007-PVE-Up-glusterfs-allow-partial-reads.patch

@@ -16,7 +16,7 @@ Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
  1 file changed, 9 insertions(+), 1 deletion(-)
 
 diff --git a/block/gluster.c b/block/gluster.c
-index f11a40aa9e..6756e6b886 100644
+index 3ba9bbfa5e..34936eb855 100644
 --- a/block/gluster.c
 +++ b/block/gluster.c
 @@ -58,6 +58,7 @@ typedef struct GlusterAIOCB {
@@ -39,7 +39,7 @@ index f11a40aa9e..6756e6b886 100644
      }
  
      aio_co_schedule(acb->aio_context, acb->coroutine);
-@@ -1021,6 +1024,7 @@ static coroutine_fn int qemu_gluster_co_pwrite_zeroes(BlockDriverState *bs,
+@@ -1023,6 +1026,7 @@ static coroutine_fn int qemu_gluster_co_pwrite_zeroes(BlockDriverState *bs,
      acb.ret = 0;
      acb.coroutine = qemu_coroutine_self();
      acb.aio_context = bdrv_get_aio_context(bs);
@@ -47,7 +47,7 @@ index f11a40aa9e..6756e6b886 100644
  
      ret = glfs_zerofill_async(s->fd, offset, bytes, gluster_finish_aiocb, &acb);
      if (ret < 0) {
-@@ -1201,9 +1205,11 @@ static coroutine_fn int qemu_gluster_co_rw(BlockDriverState *bs,
+@@ -1203,9 +1207,11 @@ static coroutine_fn int qemu_gluster_co_rw(BlockDriverState *bs,
      acb.aio_context = bdrv_get_aio_context(bs);
  
      if (write) {
@@ -59,7 +59,7 @@ index f11a40aa9e..6756e6b886 100644
          ret = glfs_preadv_async(s->fd, qiov->iov, qiov->niov, offset, 0,
                                  gluster_finish_aiocb, &acb);
      }
-@@ -1266,6 +1272,7 @@ static coroutine_fn int qemu_gluster_co_flush_to_disk(BlockDriverState *bs)
+@@ -1268,6 +1274,7 @@ static coroutine_fn int qemu_gluster_co_flush_to_disk(BlockDriverState *bs)
      acb.ret = 0;
      acb.coroutine = qemu_coroutine_self();
      acb.aio_context = bdrv_get_aio_context(bs);
@@ -67,7 +67,7 @@ index f11a40aa9e..6756e6b886 100644
  
      ret = glfs_fsync_async(s->fd, gluster_finish_aiocb, &acb);
      if (ret < 0) {
-@@ -1314,6 +1321,7 @@ static coroutine_fn int qemu_gluster_co_pdiscard(BlockDriverState *bs,
+@@ -1316,6 +1323,7 @@ static coroutine_fn int qemu_gluster_co_pdiscard(BlockDriverState *bs,
      acb.ret = 0;
      acb.coroutine = qemu_coroutine_self();
      acb.aio_context = bdrv_get_aio_context(bs);

debian/patches/pve/0008-PVE-Up-qemu-img-return-success-on-info-without-snaps.patch

@@ -9,10 +9,10 @@ Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
  1 file changed, 2 insertions(+), 1 deletion(-)
 
 diff --git a/qemu-img.c b/qemu-img.c
-index 9aeac69fa6..0919fac1f1 100644
+index 7668f86769..2575e97b43 100644
 --- a/qemu-img.c
 +++ b/qemu-img.c
-@@ -3059,7 +3059,8 @@ static int img_info(int argc, char **argv)
+@@ -3075,7 +3075,8 @@ static int img_info(int argc, char **argv)
      list = collect_image_info_list(image_opts, filename, fmt, chain,
                                     force_share);
      if (!list) {

debian/patches/pve/0009-PVE-Up-qemu-img-dd-add-osize-and-read-from-to-stdin-.patch

@@ -38,10 +38,10 @@ Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
  2 files changed, 133 insertions(+), 73 deletions(-)
 
 diff --git a/qemu-img-cmds.hx b/qemu-img-cmds.hx
-index 1b1dab5b17..d1616c045a 100644
+index c9dd70a892..048788b23d 100644
 --- a/qemu-img-cmds.hx
 +++ b/qemu-img-cmds.hx
-@@ -58,9 +58,9 @@ SRST
+@@ -60,9 +60,9 @@ SRST
  ERST
  
  DEF("dd", img_dd,
@@ -54,10 +54,10 @@ index 1b1dab5b17..d1616c045a 100644
  
  DEF("info", img_info,
 diff --git a/qemu-img.c b/qemu-img.c
-index 0919fac1f1..c584de648c 100644
+index 2575e97b43..8ec68b346f 100644
 --- a/qemu-img.c
 +++ b/qemu-img.c
-@@ -4885,10 +4885,12 @@ static int img_bitmap(int argc, char **argv)
+@@ -4993,10 +4993,12 @@ static int img_bitmap(int argc, char **argv)
  #define C_IF      04
  #define C_OF      010
  #define C_SKIP    020
@@ -70,7 +70,7 @@ index 0919fac1f1..c584de648c 100644
  };
  
  struct DdIo {
-@@ -4964,6 +4966,19 @@ static int img_dd_skip(const char *arg,
+@@ -5072,6 +5074,19 @@ static int img_dd_skip(const char *arg,
      return 0;
  }
  
@@ -90,7 +90,7 @@ index 0919fac1f1..c584de648c 100644
  static int img_dd(int argc, char **argv)
  {
      int ret = 0;
-@@ -5004,6 +5019,7 @@ static int img_dd(int argc, char **argv)
+@@ -5112,6 +5127,7 @@ static int img_dd(int argc, char **argv)
          { "if", img_dd_if, C_IF },
          { "of", img_dd_of, C_OF },
          { "skip", img_dd_skip, C_SKIP },
@@ -98,7 +98,7 @@ index 0919fac1f1..c584de648c 100644
          { NULL, NULL, 0 }
      };
      const struct option long_options[] = {
-@@ -5079,91 +5095,112 @@ static int img_dd(int argc, char **argv)
+@@ -5187,91 +5203,112 @@ static int img_dd(int argc, char **argv)
          arg = NULL;
      }
  
@@ -275,7 +275,7 @@ index 0919fac1f1..c584de648c 100644
      }
  
      if (dd.flags & C_SKIP && (in.offset > INT64_MAX / in.bsz ||
-@@ -5180,20 +5217,43 @@ static int img_dd(int argc, char **argv)
+@@ -5288,20 +5325,43 @@ static int img_dd(int argc, char **argv)
      in.buf = g_new(uint8_t, in.bsz);
  
      for (out_pos = 0; in_pos < size; ) {

debian/patches/pve/0010-PVE-Up-qemu-img-dd-add-isize-parameter.patch

@@ -16,10 +16,10 @@ Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
  1 file changed, 25 insertions(+), 3 deletions(-)
 
 diff --git a/qemu-img.c b/qemu-img.c
-index c584de648c..a57ceeddfe 100644
+index 8ec68b346f..b98184bba1 100644
 --- a/qemu-img.c
 +++ b/qemu-img.c
-@@ -4886,11 +4886,13 @@ static int img_bitmap(int argc, char **argv)
+@@ -4994,11 +4994,13 @@ static int img_bitmap(int argc, char **argv)
  #define C_OF      010
  #define C_SKIP    020
  #define C_OSIZE   040
@@ -33,7 +33,7 @@ index c584de648c..a57ceeddfe 100644
  };
  
  struct DdIo {
-@@ -4979,6 +4981,19 @@ static int img_dd_osize(const char *arg,
+@@ -5087,6 +5089,19 @@ static int img_dd_osize(const char *arg,
      return 0;
  }
  
@@ -53,7 +53,7 @@ index c584de648c..a57ceeddfe 100644
  static int img_dd(int argc, char **argv)
  {
      int ret = 0;
-@@ -4993,12 +5008,14 @@ static int img_dd(int argc, char **argv)
+@@ -5101,12 +5116,14 @@ static int img_dd(int argc, char **argv)
      int c, i;
      const char *out_fmt = "raw";
      const char *fmt = NULL;
@@ -69,7 +69,7 @@ index c584de648c..a57ceeddfe 100644
      };
      struct DdIo in = {
          .bsz = 512, /* Block size is by default 512 bytes */
-@@ -5020,6 +5037,7 @@ static int img_dd(int argc, char **argv)
+@@ -5128,6 +5145,7 @@ static int img_dd(int argc, char **argv)
          { "of", img_dd_of, C_OF },
          { "skip", img_dd_skip, C_SKIP },
          { "osize", img_dd_osize, C_OSIZE },
@@ -77,7 +77,7 @@ index c584de648c..a57ceeddfe 100644
          { NULL, NULL, 0 }
      };
      const struct option long_options[] = {
-@@ -5216,9 +5234,10 @@ static int img_dd(int argc, char **argv)
+@@ -5324,9 +5342,10 @@ static int img_dd(int argc, char **argv)
  
      in.buf = g_new(uint8_t, in.bsz);
  
@@ -90,7 +90,7 @@ index c584de648c..a57ceeddfe 100644
          if (blk1) {
              in_ret = blk_pread(blk1, in_pos, bytes, in.buf, 0);
              if (in_ret == 0) {
-@@ -5227,6 +5246,9 @@ static int img_dd(int argc, char **argv)
+@@ -5335,6 +5354,9 @@ static int img_dd(int argc, char **argv)
          } else {
              in_ret = read(STDIN_FILENO, in.buf, bytes);
              if (in_ret == 0) {

debian/patches/pve/0011-PVE-Up-qemu-img-dd-add-n-skip_create.patch

@@ -13,10 +13,10 @@ Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
  3 files changed, 26 insertions(+), 12 deletions(-)
 
 diff --git a/docs/tools/qemu-img.rst b/docs/tools/qemu-img.rst
-index 15aeddc6d8..5e713e231d 100644
+index 3653adb963..d83e8fb3c0 100644
 --- a/docs/tools/qemu-img.rst
 +++ b/docs/tools/qemu-img.rst
-@@ -208,6 +208,10 @@ Parameters to convert subcommand:
+@@ -212,6 +212,10 @@ Parameters to convert subcommand:
  
  Parameters to dd subcommand:
  
@@ -27,7 +27,7 @@ index 15aeddc6d8..5e713e231d 100644
  .. program:: qemu-img-dd
  
  .. option:: bs=BLOCK_SIZE
-@@ -488,7 +492,7 @@ Command description:
+@@ -492,7 +496,7 @@ Command description:
    it doesn't need to be specified separately in this case.
  
  
@@ -36,7 +36,7 @@ index 15aeddc6d8..5e713e231d 100644
  
    dd copies from *INPUT* file to *OUTPUT* file converting it from
    *FMT* format to *OUTPUT_FMT* format.
-@@ -499,6 +503,11 @@ Command description:
+@@ -503,6 +507,11 @@ Command description:
  
    The size syntax is similar to :manpage:`dd(1)`'s size syntax.
  
@@ -49,10 +49,10 @@ index 15aeddc6d8..5e713e231d 100644
  
    Give information about the disk image *FILENAME*. Use it in
 diff --git a/qemu-img-cmds.hx b/qemu-img-cmds.hx
-index d1616c045a..b5b0bb4467 100644
+index 048788b23d..0b29a67a06 100644
 --- a/qemu-img-cmds.hx
 +++ b/qemu-img-cmds.hx
-@@ -58,9 +58,9 @@ SRST
+@@ -60,9 +60,9 @@ SRST
  ERST
  
  DEF("dd", img_dd,
@@ -65,10 +65,10 @@ index d1616c045a..b5b0bb4467 100644
  
  DEF("info", img_info,
 diff --git a/qemu-img.c b/qemu-img.c
-index a57ceeddfe..06d814e39c 100644
+index b98184bba1..6fc8384f64 100644
 --- a/qemu-img.c
 +++ b/qemu-img.c
-@@ -5010,7 +5010,7 @@ static int img_dd(int argc, char **argv)
+@@ -5118,7 +5118,7 @@ static int img_dd(int argc, char **argv)
      const char *fmt = NULL;
      int64_t size = 0, readsize = 0;
      int64_t out_pos, in_pos;
@@ -77,7 +77,7 @@ index a57ceeddfe..06d814e39c 100644
      struct DdInfo dd = {
          .flags = 0,
          .count = 0,
-@@ -5048,7 +5048,7 @@ static int img_dd(int argc, char **argv)
+@@ -5156,7 +5156,7 @@ static int img_dd(int argc, char **argv)
          { 0, 0, 0, 0 }
      };
  
@@ -86,7 +86,7 @@ index a57ceeddfe..06d814e39c 100644
          if (c == EOF) {
              break;
          }
-@@ -5068,6 +5068,9 @@ static int img_dd(int argc, char **argv)
+@@ -5176,6 +5176,9 @@ static int img_dd(int argc, char **argv)
          case 'h':
              help();
              break;
@@ -96,7 +96,7 @@ index a57ceeddfe..06d814e39c 100644
          case 'U':
              force_share = true;
              break;
-@@ -5198,13 +5201,15 @@ static int img_dd(int argc, char **argv)
+@@ -5306,13 +5309,15 @@ static int img_dd(int argc, char **argv)
                                  size - in.bsz * in.offset, &error_abort);
          }
  

debian/patches/pve/0012-qemu-img-dd-add-l-option-for-loading-a-snapshot.patch

@@ -12,10 +12,10 @@ Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
  3 files changed, 36 insertions(+), 7 deletions(-)
 
 diff --git a/docs/tools/qemu-img.rst b/docs/tools/qemu-img.rst
-index 5e713e231d..9390d5e5cf 100644
+index d83e8fb3c0..61c6b21859 100644
 --- a/docs/tools/qemu-img.rst
 +++ b/docs/tools/qemu-img.rst
-@@ -492,10 +492,10 @@ Command description:
+@@ -496,10 +496,10 @@ Command description:
    it doesn't need to be specified separately in this case.
  
  
@@ -30,10 +30,10 @@ index 5e713e231d..9390d5e5cf 100644
    The data is by default read and written using blocks of 512 bytes but can be
    modified by specifying *BLOCK_SIZE*. If count=\ *BLOCKS* is specified
 diff --git a/qemu-img-cmds.hx b/qemu-img-cmds.hx
-index b5b0bb4467..36f97e1f19 100644
+index 0b29a67a06..758f397232 100644
 --- a/qemu-img-cmds.hx
 +++ b/qemu-img-cmds.hx
-@@ -58,9 +58,9 @@ SRST
+@@ -60,9 +60,9 @@ SRST
  ERST
  
  DEF("dd", img_dd,
@@ -46,10 +46,10 @@ index b5b0bb4467..36f97e1f19 100644
  
  DEF("info", img_info,
 diff --git a/qemu-img.c b/qemu-img.c
-index 06d814e39c..e2c06c496d 100644
+index 6fc8384f64..a6c88e0860 100644
 --- a/qemu-img.c
 +++ b/qemu-img.c
-@@ -5002,6 +5002,7 @@ static int img_dd(int argc, char **argv)
+@@ -5110,6 +5110,7 @@ static int img_dd(int argc, char **argv)
      BlockDriver *drv = NULL, *proto_drv = NULL;
      BlockBackend *blk1 = NULL, *blk2 = NULL;
      QemuOpts *opts = NULL;
@@ -57,7 +57,7 @@ index 06d814e39c..e2c06c496d 100644
      QemuOptsList *create_opts = NULL;
      Error *local_err = NULL;
      bool image_opts = false;
-@@ -5011,6 +5012,7 @@ static int img_dd(int argc, char **argv)
+@@ -5119,6 +5120,7 @@ static int img_dd(int argc, char **argv)
      int64_t size = 0, readsize = 0;
      int64_t out_pos, in_pos;
      bool force_share = false, skip_create = false;
@@ -65,7 +65,7 @@ index 06d814e39c..e2c06c496d 100644
      struct DdInfo dd = {
          .flags = 0,
          .count = 0,
-@@ -5048,7 +5050,7 @@ static int img_dd(int argc, char **argv)
+@@ -5156,7 +5158,7 @@ static int img_dd(int argc, char **argv)
          { 0, 0, 0, 0 }
      };
  
@@ -74,7 +74,7 @@ index 06d814e39c..e2c06c496d 100644
          if (c == EOF) {
              break;
          }
-@@ -5071,6 +5073,19 @@ static int img_dd(int argc, char **argv)
+@@ -5179,6 +5181,19 @@ static int img_dd(int argc, char **argv)
          case 'n':
              skip_create = true;
              break;
@@ -94,7 +94,7 @@ index 06d814e39c..e2c06c496d 100644
          case 'U':
              force_share = true;
              break;
-@@ -5130,11 +5145,24 @@ static int img_dd(int argc, char **argv)
+@@ -5238,11 +5253,24 @@ static int img_dd(int argc, char **argv)
      if (dd.flags & C_IF) {
          blk1 = img_open(image_opts, in.filename, fmt, 0, false, false,
                          force_share);
@@ -120,7 +120,7 @@ index 06d814e39c..e2c06c496d 100644
      }
  
      if (dd.flags & C_OSIZE) {
-@@ -5289,6 +5317,7 @@ static int img_dd(int argc, char **argv)
+@@ -5397,6 +5425,7 @@ static int img_dd(int argc, char **argv)
  out:
      g_free(arg);
      qemu_opts_del(opts);

debian/patches/pve/0013-PVE-virtio-balloon-improve-query-balloon.patch

@@ -18,10 +18,10 @@ Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
  4 files changed, 82 insertions(+), 4 deletions(-)
 
 diff --git a/hw/core/machine-hmp-cmds.c b/hw/core/machine-hmp-cmds.c
-index c3e55ef9e9..0e32e6201f 100644
+index a6ff6a4875..e7f74d1c63 100644
 --- a/hw/core/machine-hmp-cmds.c
 +++ b/hw/core/machine-hmp-cmds.c
-@@ -169,7 +169,35 @@ void hmp_info_balloon(Monitor *mon, const QDict *qdict)
+@@ -175,7 +175,35 @@ void hmp_info_balloon(Monitor *mon, const QDict *qdict)
          return;
      }
  
@@ -59,10 +59,10 @@ index c3e55ef9e9..0e32e6201f 100644
      qapi_free_BalloonInfo(info);
  }
 diff --git a/hw/virtio/virtio-balloon.c b/hw/virtio/virtio-balloon.c
-index 746f07c4d2..a41854b902 100644
+index 609e39a821..8cb6dfcac3 100644
 --- a/hw/virtio/virtio-balloon.c
 +++ b/hw/virtio/virtio-balloon.c
-@@ -804,8 +804,37 @@ static uint64_t virtio_balloon_get_features(VirtIODevice *vdev, uint64_t f,
+@@ -781,8 +781,37 @@ static uint64_t virtio_balloon_get_features(VirtIODevice *vdev, uint64_t f,
  static void virtio_balloon_stat(void *opaque, BalloonInfo *info)
  {
      VirtIOBalloon *dev = opaque;
@@ -103,12 +103,12 @@ index 746f07c4d2..a41854b902 100644
  
  static void virtio_balloon_to_target(void *opaque, ram_addr_t target)
 diff --git a/qapi/machine.json b/qapi/machine.json
-index 604b686e59..15f5f86683 100644
+index e8b60641f2..2054cdc70d 100644
 --- a/qapi/machine.json
 +++ b/qapi/machine.json
-@@ -1056,9 +1056,29 @@
- # @actual: the logical size of the VM in bytes
- #          Formula used: logical_vm_size = vm_ram_size - balloon_size
+@@ -1079,9 +1079,29 @@
+ # @actual: the logical size of the VM in bytes Formula used:
+ #     logical_vm_size = vm_ram_size - balloon_size
  #
 +# @last_update: time when stats got updated from guest
 +#
@@ -138,10 +138,10 @@ index 604b686e59..15f5f86683 100644
  ##
  # @query-balloon:
 diff --git a/qapi/pragma.json b/qapi/pragma.json
-index 7f810b0e97..325e684411 100644
+index 59fbe74b8c..be8fa304c5 100644
 --- a/qapi/pragma.json
 +++ b/qapi/pragma.json
-@@ -35,6 +35,7 @@
+@@ -90,6 +90,7 @@
      'member-name-exceptions': [     # visible in:
          'ACPISlotType',             # query-acpi-ospm-status
          'AcpiTableOptions',         # -acpitable

debian/patches/pve/0014-PVE-qapi-modify-query-machines.patch

@@ -13,10 +13,10 @@ Signed-off-by: Dietmar Maurer <dietmar@proxmox.com>
  2 files changed, 9 insertions(+), 1 deletion(-)
 
 diff --git a/hw/core/machine-qmp-cmds.c b/hw/core/machine-qmp-cmds.c
-index b98ff15089..24595f618c 100644
+index 4b72009cd3..314351cdff 100644
 --- a/hw/core/machine-qmp-cmds.c
 +++ b/hw/core/machine-qmp-cmds.c
-@@ -103,6 +103,12 @@ MachineInfoList *qmp_query_machines(Error **errp)
+@@ -90,6 +90,12 @@ MachineInfoList *qmp_query_machines(Error **errp)
          info->numa_mem_supported = mc->numa_mem_supported;
          info->deprecated = !!mc->deprecation_reason;
          info->acpi = !!object_class_property_find(OBJECT_CLASS(mc), "acpi");
@@ -30,19 +30,19 @@ index b98ff15089..24595f618c 100644
              info->default_cpu_type = g_strdup(mc->default_cpu_type);
          }
 diff --git a/qapi/machine.json b/qapi/machine.json
-index 15f5f86683..c904280085 100644
+index 2054cdc70d..a024d5b05d 100644
 --- a/qapi/machine.json
 +++ b/qapi/machine.json
-@@ -138,6 +138,8 @@
+@@ -146,6 +146,8 @@
  #
  # @is-default: whether the machine is default
  #
 +# @is-current: whether this machine is currently used
 +#
  # @cpu-max: maximum number of CPUs supported by the machine type
- #           (since 1.5)
+ #     (since 1.5)
  #
-@@ -161,7 +163,7 @@
+@@ -170,7 +172,7 @@
  ##
  { 'struct': 'MachineInfo',
    'data': { 'name': 'str', '*alias': 'str',

debian/patches/pve/0015-PVE-qapi-modify-spice-query.patch

@@ -14,10 +14,10 @@ Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
  2 files changed, 7 insertions(+)
 
 diff --git a/qapi/ui.json b/qapi/ui.json
-index 98322342f7..316d4dc933 100644
+index f610bce118..6ea26a9acb 100644
 --- a/qapi/ui.json
 +++ b/qapi/ui.json
-@@ -310,11 +310,14 @@
+@@ -314,11 +314,14 @@
  #
  # @channels: a list of @SpiceChannel for each active spice channel
  #
@@ -33,7 +33,7 @@ index 98322342f7..316d4dc933 100644
    'if': 'CONFIG_SPICE' }
  
 diff --git a/ui/spice-core.c b/ui/spice-core.c
-index b20c25aee0..26baeb7846 100644
+index ea20e6153c..55a15fba8b 100644
 --- a/ui/spice-core.c
 +++ b/ui/spice-core.c
 @@ -548,6 +548,10 @@ static SpiceInfo *qmp_query_spice_real(Error **errp)

debian/patches/pve/0016-PVE-add-IOChannel-implementation-for-savevm-async.patch

@@ -14,20 +14,21 @@ Additionally, allows tracking the current position from the outside
 (intended to be used for progress tracking).
 
 Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
+Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
 ---
- migration/channel-savevm-async.c | 183 +++++++++++++++++++++++++++++++
+ migration/channel-savevm-async.c | 184 +++++++++++++++++++++++++++++++
  migration/channel-savevm-async.h |  51 +++++++++
  migration/meson.build            |   1 +
- 3 files changed, 235 insertions(+)
+ 3 files changed, 236 insertions(+)
  create mode 100644 migration/channel-savevm-async.c
  create mode 100644 migration/channel-savevm-async.h
 
 diff --git a/migration/channel-savevm-async.c b/migration/channel-savevm-async.c
 new file mode 100644
-index 0000000000..aab081ce07
+index 0000000000..081a192f49
 --- /dev/null
 +++ b/migration/channel-savevm-async.c
-@@ -0,0 +1,183 @@
+@@ -0,0 +1,184 @@
 +/*
 + * QIO Channel implementation to be used by savevm-async QMP calls
 + */
@@ -174,8 +175,9 @@ index 0000000000..aab081ce07
 +
 +static void
 +qio_channel_savevm_async_set_aio_fd_handler(QIOChannel *ioc,
-+                                            AioContext *ctx,
++                                            AioContext *read_ctx,
 +                                            IOHandler *io_read,
++                                            AioContext *write_ctx,
 +                                            IOHandler *io_write,
 +                                            void *opaque)
 +{
@@ -269,14 +271,14 @@ index 0000000000..17ae2cb261
 +
 +#endif /* QIO_CHANNEL_SAVEVM_ASYNC_H */
 diff --git a/migration/meson.build b/migration/meson.build
-index 0d1bb9f96e..8a142fc7a9 100644
+index 1eeb915ff6..95d1cf2250 100644
 --- a/migration/meson.build
 +++ b/migration/meson.build
-@@ -13,6 +13,7 @@ softmmu_ss.add(files(
+@@ -13,6 +13,7 @@ system_ss.add(files(
    'block-dirty-bitmap.c',
    'channel.c',
    'channel-block.c',
 +  'channel-savevm-async.c',
-   'colo-failover.c',
-   'colo.c',
+   'dirtyrate.c',
    'exec.c',
+   'fd.c',

debian/patches/pve/0017-PVE-add-savevm-async-for-background-state-snapshots.patch

@@ -27,7 +27,7 @@ Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
 [FE: further improve aborting
      adapt to removal of QEMUFileOps
      improve condition for entering final stage
-     adapt to QAPI and other changes for 8.0]
+     adapt to QAPI and other changes for 8.2]
 Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
 ---
  hmp-commands-info.hx         |  13 +
@@ -35,20 +35,20 @@ Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
  include/migration/snapshot.h |   2 +
  include/monitor/hmp.h        |   3 +
  migration/meson.build        |   1 +
- migration/savevm-async.c     | 533 +++++++++++++++++++++++++++++++++++
+ migration/savevm-async.c     | 531 +++++++++++++++++++++++++++++++++++
  monitor/hmp-cmds.c           |  38 +++
  qapi/migration.json          |  34 +++
- qapi/misc.json               |  16 ++
+ qapi/misc.json               |  18 ++
  qemu-options.hx              |  12 +
- softmmu/vl.c                 |  10 +
+ system/vl.c                  |  10 +
  11 files changed, 679 insertions(+)
  create mode 100644 migration/savevm-async.c
 
 diff --git a/hmp-commands-info.hx b/hmp-commands-info.hx
-index 47d63d26db..a166bff3d5 100644
+index ad1b1306e3..d5ab880492 100644
 --- a/hmp-commands-info.hx
 +++ b/hmp-commands-info.hx
-@@ -540,6 +540,19 @@ SRST
+@@ -525,6 +525,19 @@ SRST
      Show current migration parameters.
  ERST
  
@@ -69,10 +69,10 @@ index 47d63d26db..a166bff3d5 100644
          .name       = "balloon",
          .args_type  = "",
 diff --git a/hmp-commands.hx b/hmp-commands.hx
-index bb85ee1d26..d9f9f42d11 100644
+index 2e2a3bcf98..7506de251c 100644
 --- a/hmp-commands.hx
 +++ b/hmp-commands.hx
-@@ -1846,3 +1846,20 @@ SRST
+@@ -1862,3 +1862,20 @@ SRST
    List event channels in the guest
  ERST
  #endif
@@ -94,18 +94,18 @@ index bb85ee1d26..d9f9f42d11 100644
 +        .coroutine  = true,
 +    },
 diff --git a/include/migration/snapshot.h b/include/migration/snapshot.h
-index e72083b117..c846d37806 100644
+index 9e4dcaaa75..2581730d74 100644
 --- a/include/migration/snapshot.h
 +++ b/include/migration/snapshot.h
-@@ -61,4 +61,6 @@ bool delete_snapshot(const char *name,
-                     bool has_devices, strList *devices,
-                     Error **errp);
+@@ -68,4 +68,6 @@ bool delete_snapshot(const char *name,
+  */
+ void load_snapshot_resume(RunState state);
  
 +int load_snapshot_from_blockdev(const char *filename, Error **errp);
 +
  #endif
 diff --git a/include/monitor/hmp.h b/include/monitor/hmp.h
-index fdb69b7f9c..fdf6b45fb8 100644
+index 13f9a2dedb..7a7def7530 100644
 --- a/include/monitor/hmp.h
 +++ b/include/monitor/hmp.h
 @@ -28,6 +28,7 @@ void hmp_info_status(Monitor *mon, const QDict *qdict);
@@ -126,11 +126,11 @@ index fdb69b7f9c..fdf6b45fb8 100644
  void coroutine_fn hmp_screendump(Monitor *mon, const QDict *qdict);
  void hmp_chardev_add(Monitor *mon, const QDict *qdict);
 diff --git a/migration/meson.build b/migration/meson.build
-index 8a142fc7a9..a7824b5266 100644
+index 95d1cf2250..800f12a60d 100644
 --- a/migration/meson.build
 +++ b/migration/meson.build
-@@ -25,6 +25,7 @@ softmmu_ss.add(files(
-   'multifd-zlib.c',
+@@ -28,6 +28,7 @@ system_ss.add(files(
+   'options.c',
    'postcopy-ram.c',
    'savevm.c',
 +  'savevm-async.c',
@@ -139,13 +139,15 @@ index 8a142fc7a9..a7824b5266 100644
    'threadinfo.c',
 diff --git a/migration/savevm-async.c b/migration/savevm-async.c
 new file mode 100644
-index 0000000000..ac1fac6378
+index 0000000000..779e4e2a78
 --- /dev/null
 +++ b/migration/savevm-async.c
-@@ -0,0 +1,533 @@
+@@ -0,0 +1,531 @@
 +#include "qemu/osdep.h"
 +#include "migration/channel-savevm-async.h"
 +#include "migration/migration.h"
++#include "migration/migration-stats.h"
++#include "migration/options.h"
 +#include "migration/savevm.h"
 +#include "migration/snapshot.h"
 +#include "migration/global_state.h"
@@ -275,7 +277,7 @@ index 0000000000..ac1fac6378
 +    return ret;
 +}
 +
-+static void save_snapshot_error(const char *fmt, ...)
++static void G_GNUC_PRINTF(1, 2) save_snapshot_error(const char *fmt, ...)
 +{
 +    va_list ap;
 +    char *msg;
@@ -298,7 +300,6 @@ index 0000000000..ac1fac6378
 +static void process_savevm_finalize(void *opaque)
 +{
 +    int ret;
-+    AioContext *iohandler_ctx = iohandler_get_aio_context();
 +    MigrationState *ms = migrate_get_current();
 +
 +    bool aborted = savevm_aborted();
@@ -315,9 +316,7 @@ index 0000000000..ac1fac6378
 +     * so move it back. It can stay in the main context and live out its live
 +     * there, since we're done with it after this method ends anyway.
 +     */
-+    aio_context_acquire(iohandler_ctx);
 +    blk_set_aio_context(snap_state.target, qemu_get_aio_context(), NULL);
-+    aio_context_release(iohandler_ctx);
 +
 +    ret = vm_stop_force_state(RUN_STATE_FINISH_MIGRATE);
 +    if (ret < 0) {
@@ -394,12 +393,12 @@ index 0000000000..ac1fac6378
 +         * lock. Similar to what is done in migration.c, call the exact variant
 +         * only once pend_precopy in the estimate is below the threshold.
 +         */
-+        qemu_mutex_unlock_iothread();
++        bql_unlock();
 +        qemu_savevm_state_pending_estimate(&pend_precopy, &pend_postcopy);
 +        if (pend_precopy <= threshold) {
 +            qemu_savevm_state_pending_exact(&pend_precopy, &pend_postcopy);
 +        }
-+        qemu_mutex_lock_iothread();
++        bql_lock();
 +        pending_size = pend_precopy + pend_postcopy;
 +
 +        /*
@@ -420,11 +419,7 @@ index 0000000000..ac1fac6378
 +            DPRINTF("savevm iterate pending size %lu ret %d\n", pending_size, ret);
 +        } else {
 +            qemu_system_wakeup_request(QEMU_WAKEUP_REASON_OTHER, NULL);
-+            ret = global_state_store();
-+            if (ret) {
-+                save_snapshot_error("global_state_store error %d", ret);
-+                break;
-+            }
++            global_state_store();
 +
 +            DPRINTF("savevm iterate complete\n");
 +            break;
@@ -443,21 +438,25 @@ index 0000000000..ac1fac6378
 +     * so move there now and after every flush.
 +     */
 +    aio_co_reschedule_self(qemu_get_aio_context());
-+    for (bs = bdrv_first(&it); bs; bs = bdrv_next(&it)) {
++    bdrv_graph_co_rdlock();
++    bs = bdrv_first(&it);
++    bdrv_graph_co_rdunlock();
++    while (bs) {
 +        /* target has BDRV_O_NO_FLUSH, no sense calling bdrv_flush on it */
-+        if (bs == blk_bs(snap_state.target)) {
-+            continue;
-+        }
-+
-+        AioContext *bs_ctx = bdrv_get_aio_context(bs);
-+        if (bs_ctx != qemu_get_aio_context()) {
-+            DPRINTF("savevm: async flushing drive %s\n", bs->filename);
-+            aio_co_reschedule_self(bs_ctx);
-+            bdrv_graph_co_rdlock();
-+            bdrv_flush(bs);
-+            bdrv_graph_co_rdunlock();
-+            aio_co_reschedule_self(qemu_get_aio_context());
++        if (bs != blk_bs(snap_state.target)) {
++            AioContext *bs_ctx = bdrv_get_aio_context(bs);
++            if (bs_ctx != qemu_get_aio_context()) {
++                DPRINTF("savevm: async flushing drive %s\n", bs->filename);
++                aio_co_reschedule_self(bs_ctx);
++                bdrv_graph_co_rdlock();
++                bdrv_flush(bs);
++                bdrv_graph_co_rdunlock();
++                aio_co_reschedule_self(qemu_get_aio_context());
++            }
 +        }
++        bdrv_graph_co_rdlock();
++        bs = bdrv_next(&it);
++        bdrv_graph_co_rdunlock();
 +    }
 +
 +    DPRINTF("timing: async flushing took %ld ms\n",
@@ -480,12 +479,12 @@ index 0000000000..ac1fac6378
 +        return;
 +    }
 +
-+    if (migration_is_running(ms->state)) {
++    if (migration_is_running()) {
 +        error_set(errp, ERROR_CLASS_GENERIC_ERROR, QERR_MIGRATION_ACTIVE);
 +        return;
 +    }
 +
-+    if (migrate_use_block()) {
++    if (migrate_block()) {
 +        error_set(errp, ERROR_CLASS_GENERIC_ERROR,
 +                  "Block migration and snapshots are incompatible");
 +        return;
@@ -537,9 +536,10 @@ index 0000000000..ac1fac6378
 +     * State is cleared in process_savevm_co, but has to be initialized
 +     * here (blocking main thread, from QMP) to avoid race conditions.
 +     */
-+    migrate_init(ms);
-+    memset(&ram_counters, 0, sizeof(ram_counters));
-+    memset(&compression_counters, 0, sizeof(compression_counters));
++    if (migrate_init(ms, errp)) {
++        return;
++    }
++    memset(&mig_stats, 0, sizeof(mig_stats));
 +    ms->to_dst_file = snap_state.file;
 +
 +    error_setg(&snap_state.blocker, "block device is in use by savevm");
@@ -548,10 +548,8 @@ index 0000000000..ac1fac6378
 +    snap_state.state = SAVE_STATE_ACTIVE;
 +    snap_state.finalize_bh = qemu_bh_new(process_savevm_finalize, &snap_state);
 +    snap_state.co = qemu_coroutine_create(&process_savevm_co, NULL);
-+    qemu_mutex_unlock_iothread();
 +    qemu_savevm_state_header(snap_state.file);
 +    qemu_savevm_state_setup(snap_state.file);
-+    qemu_mutex_lock_iothread();
 +
 +    /* Async processing from here on out happens in iohandler context, so let
 +     * the target bdrv have its home there.
@@ -677,7 +675,7 @@ index 0000000000..ac1fac6378
 +    return ret;
 +}
 diff --git a/monitor/hmp-cmds.c b/monitor/hmp-cmds.c
-index 6c559b48c8..91be698308 100644
+index 871898ac46..ef4634e5c1 100644
 --- a/monitor/hmp-cmds.c
 +++ b/monitor/hmp-cmds.c
 @@ -22,6 +22,7 @@
@@ -687,7 +685,7 @@ index 6c559b48c8..91be698308 100644
 +#include "qapi/qapi-commands-migration.h"
  #include "qapi/qapi-commands-misc.h"
  #include "qapi/qmp/qdict.h"
- #include "qapi/qmp/qerror.h"
+ #include "qemu/cutils.h"
 @@ -443,3 +444,40 @@ void hmp_info_mtree(Monitor *mon, const QDict *qdict)
  
      mtree_info(flatview, dispatch_tree, owner, disabled);
@@ -730,12 +728,12 @@ index 6c559b48c8..91be698308 100644
 +    }
 +}
 diff --git a/qapi/migration.json b/qapi/migration.json
-index c84fa10e86..1702b92553 100644
+index 8c65b90328..ed20d066cd 100644
 --- a/qapi/migration.json
 +++ b/qapi/migration.json
-@@ -261,6 +261,40 @@
-            '*compression': 'CompressionStats',
-            '*socket-address': ['SocketAddress'] } }
+@@ -297,6 +297,40 @@
+            '*dirty-limit-throttle-time-per-round': 'uint64',
+            '*dirty-limit-ring-full-time': 'uint64'} }
  
 +##
 +# @SaveVMInfo:
@@ -775,10 +773,10 @@ index c84fa10e86..1702b92553 100644
  # @query-migrate:
  #
 diff --git a/qapi/misc.json b/qapi/misc.json
-index 6ddd16ea28..e5681ae8a2 100644
+index ec30e5c570..7147199a12 100644
 --- a/qapi/misc.json
 +++ b/qapi/misc.json
-@@ -469,6 +469,22 @@
+@@ -454,6 +454,24 @@
  ##
  { 'command': 'query-fdsets', 'returns': ['FdsetInfo'] }
  
@@ -787,6 +785,8 @@ index 6ddd16ea28..e5681ae8a2 100644
 +#
 +# Prepare for snapshot and halt VM. Save VM state to statefile.
 +#
++# @statefile: target file that state should be written to.
++#
 +##
 +{ 'command': 'savevm-start', 'data': { '*statefile': 'str' } }
 +
@@ -802,10 +802,10 @@ index 6ddd16ea28..e5681ae8a2 100644
  # @CommandLineParameterType:
  #
 diff --git a/qemu-options.hx b/qemu-options.hx
-index fdddfab6ff..fdd551c2bb 100644
+index 8ce85d4559..511ab9415e 100644
 --- a/qemu-options.hx
 +++ b/qemu-options.hx
-@@ -4398,6 +4398,18 @@ SRST
+@@ -4610,6 +4610,18 @@ SRST
      Start right away with a saved state (``loadvm`` in monitor)
  ERST
  
@@ -824,11 +824,11 @@ index fdddfab6ff..fdd551c2bb 100644
  #ifndef _WIN32
  DEF("daemonize", 0, QEMU_OPTION_daemonize, \
      "-daemonize      daemonize QEMU after initializing\n", QEMU_ARCH_ALL)
-diff --git a/softmmu/vl.c b/softmmu/vl.c
-index ea20b23e4c..0eabc71b68 100644
---- a/softmmu/vl.c
-+++ b/softmmu/vl.c
-@@ -164,6 +164,7 @@ static const char *accelerators;
+diff --git a/system/vl.c b/system/vl.c
+index c644222982..2738ab7c91 100644
+--- a/system/vl.c
++++ b/system/vl.c
+@@ -163,6 +163,7 @@ static const char *accelerators;
  static bool have_custom_ram_size;
  static const char *ram_memdev_id;
  static QDict *machine_opts_dict;
@@ -836,10 +836,10 @@ index ea20b23e4c..0eabc71b68 100644
  static QTAILQ_HEAD(, ObjectOption) object_opts = QTAILQ_HEAD_INITIALIZER(object_opts);
  static QTAILQ_HEAD(, DeviceOption) device_opts = QTAILQ_HEAD_INITIALIZER(device_opts);
  static int display_remote;
-@@ -2612,6 +2613,12 @@ void qmp_x_exit_preconfig(Error **errp)
- 
-     if (loadvm) {
+@@ -2712,6 +2713,12 @@ void qmp_x_exit_preconfig(Error **errp)
+         RunState state = autostart ? RUN_STATE_RUNNING : runstate_get();
          load_snapshot(loadvm, NULL, false, NULL, &error_fatal);
+         load_snapshot_resume(state);
 +    } else if (loadstate) {
 +        Error *local_err = NULL;
 +        if (load_snapshot_from_blockdev(loadstate, &local_err) < 0) {
@@ -849,7 +849,7 @@ index ea20b23e4c..0eabc71b68 100644
      }
      if (replay_mode != REPLAY_MODE_NONE) {
          replay_vmstate_init();
-@@ -3159,6 +3166,9 @@ void qemu_init(int argc, char **argv)
+@@ -3259,6 +3266,9 @@ void qemu_init(int argc, char **argv)
              case QEMU_OPTION_loadvm:
                  loadvm = optarg;
                  break;

debian/patches/pve/0018-PVE-add-optional-buffer-size-to-QEMUFile.patch

@@ -13,18 +13,18 @@ Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
 [FE: adapt to removal of QEMUFileOps]
 Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
 ---
- migration/qemu-file.c    | 49 +++++++++++++++++++++++++++-------------
+ migration/qemu-file.c    | 50 +++++++++++++++++++++++++++-------------
  migration/qemu-file.h    |  2 ++
  migration/savevm-async.c |  5 ++--
- 3 files changed, 38 insertions(+), 18 deletions(-)
+ 3 files changed, 39 insertions(+), 18 deletions(-)
 
 diff --git a/migration/qemu-file.c b/migration/qemu-file.c
-index 102ab3b439..5ced17aba4 100644
+index a10882d47f..19c1de0472 100644
 --- a/migration/qemu-file.c
 +++ b/migration/qemu-file.c
-@@ -31,8 +31,8 @@
- #include "trace.h"
- #include "qapi/error.h"
+@@ -35,8 +35,8 @@
+ #include "rdma.h"
+ #include "io/channel-file.h"
  
 -#define IO_BUF_SIZE 32768
 -#define MAX_IOV_SIZE MIN_CONST(IOV_MAX, 64)
@@ -32,8 +32,8 @@ index 102ab3b439..5ced17aba4 100644
 +#define MAX_IOV_SIZE MIN_CONST(IOV_MAX, 256)
  
  struct QEMUFile {
-     const QEMUFileHooks *hooks;
-@@ -55,7 +55,8 @@ struct QEMUFile {
+     QIOChannel *ioc;
+@@ -44,7 +44,8 @@ struct QEMUFile {
  
      int buf_index;
      int buf_size; /* 0 when writing */
@@ -43,8 +43,8 @@ index 102ab3b439..5ced17aba4 100644
  
      DECLARE_BITMAP(may_free, MAX_IOV_SIZE);
      struct iovec iov[MAX_IOV_SIZE];
-@@ -127,7 +128,9 @@ bool qemu_file_mode_is_not_valid(const char *mode)
-     return false;
+@@ -101,7 +102,9 @@ int qemu_file_shutdown(QEMUFile *f)
+     return 0;
  }
  
 -static QEMUFile *qemu_file_new_impl(QIOChannel *ioc, bool is_writable)
@@ -54,7 +54,7 @@ index 102ab3b439..5ced17aba4 100644
  {
      QEMUFile *f;
  
-@@ -136,6 +139,8 @@ static QEMUFile *qemu_file_new_impl(QIOChannel *ioc, bool is_writable)
+@@ -110,6 +113,8 @@ static QEMUFile *qemu_file_new_impl(QIOChannel *ioc, bool is_writable)
      object_ref(ioc);
      f->ioc = ioc;
      f->is_writable = is_writable;
@@ -63,7 +63,7 @@ index 102ab3b439..5ced17aba4 100644
  
      return f;
  }
-@@ -146,17 +151,27 @@ static QEMUFile *qemu_file_new_impl(QIOChannel *ioc, bool is_writable)
+@@ -120,17 +125,27 @@ static QEMUFile *qemu_file_new_impl(QIOChannel *ioc, bool is_writable)
   */
  QEMUFile *qemu_file_get_return_path(QEMUFile *f)
  {
@@ -93,8 +93,8 @@ index 102ab3b439..5ced17aba4 100644
 +    return qemu_file_new_impl(ioc, false, buffer_size);
  }
  
- void qemu_file_set_hooks(QEMUFile *f, const QEMUFileHooks *hooks)
-@@ -414,7 +429,7 @@ static ssize_t qemu_fill_buffer(QEMUFile *f)
+ /*
+@@ -328,7 +343,7 @@ static ssize_t coroutine_mixed_fn qemu_fill_buffer(QEMUFile *f)
      do {
          len = qio_channel_read(f->ioc,
                                 (char *)f->buf + pending,
@@ -103,16 +103,17 @@ index 102ab3b439..5ced17aba4 100644
                                 &local_error);
          if (len == QIO_CHANNEL_ERR_BLOCK) {
              if (qemu_in_coroutine()) {
-@@ -464,6 +479,8 @@ int qemu_fclose(QEMUFile *f)
+@@ -368,6 +383,9 @@ int qemu_fclose(QEMUFile *f)
+         ret = ret2;
      }
      g_clear_pointer(&f->ioc, object_unref);
- 
++
 +    free(f->buf);
 +
-     /* If any error was spotted before closing, we should report it
-      * instead of the close() return value.
-      */
-@@ -518,7 +535,7 @@ static void add_buf_to_iovec(QEMUFile *f, size_t len)
+     error_free(f->last_error_obj);
+     g_free(f);
+     trace_qemu_file_fclose();
+@@ -416,7 +434,7 @@ static void add_buf_to_iovec(QEMUFile *f, size_t len)
  {
      if (!add_to_iovec(f, f->buf + f->buf_index, len, false)) {
          f->buf_index += len;
@@ -121,7 +122,7 @@ index 102ab3b439..5ced17aba4 100644
              qemu_fflush(f);
          }
      }
-@@ -544,7 +561,7 @@ void qemu_put_buffer(QEMUFile *f, const uint8_t *buf, size_t size)
+@@ -441,7 +459,7 @@ void qemu_put_buffer(QEMUFile *f, const uint8_t *buf, size_t size)
      }
  
      while (size > 0) {
@@ -130,7 +131,7 @@ index 102ab3b439..5ced17aba4 100644
          if (l > size) {
              l = size;
          }
-@@ -591,8 +608,8 @@ size_t qemu_peek_buffer(QEMUFile *f, uint8_t **buf, size_t size, size_t offset)
+@@ -587,8 +605,8 @@ size_t coroutine_mixed_fn qemu_peek_buffer(QEMUFile *f, uint8_t **buf, size_t si
      size_t index;
  
      assert(!qemu_file_is_writable(f));
@@ -141,7 +142,7 @@ index 102ab3b439..5ced17aba4 100644
  
      /* The 1st byte to read from */
      index = f->buf_index + offset;
-@@ -642,7 +659,7 @@ size_t qemu_get_buffer(QEMUFile *f, uint8_t *buf, size_t size)
+@@ -638,7 +656,7 @@ size_t coroutine_mixed_fn qemu_get_buffer(QEMUFile *f, uint8_t *buf, size_t size
          size_t res;
          uint8_t *src;
  
@@ -150,16 +151,16 @@ index 102ab3b439..5ced17aba4 100644
          if (res == 0) {
              return done;
          }
-@@ -676,7 +693,7 @@ size_t qemu_get_buffer(QEMUFile *f, uint8_t *buf, size_t size)
+@@ -672,7 +690,7 @@ size_t coroutine_mixed_fn qemu_get_buffer(QEMUFile *f, uint8_t *buf, size_t size
   */
- size_t qemu_get_buffer_in_place(QEMUFile *f, uint8_t **buf, size_t size)
+ size_t coroutine_mixed_fn qemu_get_buffer_in_place(QEMUFile *f, uint8_t **buf, size_t size)
  {
 -    if (size < IO_BUF_SIZE) {
 +    if (size < f->buf_allocated_size) {
          size_t res;
          uint8_t *src = NULL;
  
-@@ -701,7 +718,7 @@ int qemu_peek_byte(QEMUFile *f, int offset)
+@@ -697,7 +715,7 @@ int coroutine_mixed_fn qemu_peek_byte(QEMUFile *f, int offset)
      int index = f->buf_index + offset;
  
      assert(!qemu_file_is_writable(f));
@@ -168,7 +169,7 @@ index 102ab3b439..5ced17aba4 100644
  
      if (index >= f->buf_size) {
          qemu_fill_buffer(f);
-@@ -853,7 +870,7 @@ static int qemu_compress_data(z_stream *stream, uint8_t *dest, size_t dest_len,
+@@ -811,7 +829,7 @@ static int qemu_compress_data(z_stream *stream, uint8_t *dest, size_t dest_len,
  ssize_t qemu_put_compression_data(QEMUFile *f, z_stream *stream,
                                    const uint8_t *p, size_t size)
  {
@@ -178,24 +179,24 @@ index 102ab3b439..5ced17aba4 100644
      if (blen < compressBound(size)) {
          return -1;
 diff --git a/migration/qemu-file.h b/migration/qemu-file.h
-index 9d0155a2a1..cc06240e8d 100644
+index 32fd4a34fd..36a0cd8cc8 100644
 --- a/migration/qemu-file.h
 +++ b/migration/qemu-file.h
-@@ -63,7 +63,9 @@ typedef struct QEMUFileHooks {
- } QEMUFileHooks;
+@@ -30,7 +30,9 @@
+ #include "io/channel.h"
  
  QEMUFile *qemu_file_new_input(QIOChannel *ioc);
 +QEMUFile *qemu_file_new_input_sized(QIOChannel *ioc, size_t buffer_size);
  QEMUFile *qemu_file_new_output(QIOChannel *ioc);
 +QEMUFile *qemu_file_new_output_sized(QIOChannel *ioc, size_t buffer_size);
- void qemu_file_set_hooks(QEMUFile *f, const QEMUFileHooks *hooks);
  int qemu_fclose(QEMUFile *f);
  
+ /*
 diff --git a/migration/savevm-async.c b/migration/savevm-async.c
-index ac1fac6378..ea3b2f36a6 100644
+index 779e4e2a78..bf36fc06d2 100644
 --- a/migration/savevm-async.c
 +++ b/migration/savevm-async.c
-@@ -380,7 +380,7 @@ void qmp_savevm_start(const char *statefile, Error **errp)
+@@ -379,7 +379,7 @@ void qmp_savevm_start(const char *statefile, Error **errp)
  
      QIOChannel *ioc = QIO_CHANNEL(qio_channel_savevm_async_new(snap_state.target,
                                                                 &snap_state.bs_pos));
@@ -204,7 +205,7 @@ index ac1fac6378..ea3b2f36a6 100644
  
      if (!snap_state.file) {
          error_set(errp, ERROR_CLASS_GENERIC_ERROR, "failed to open '%s'", statefile);
-@@ -498,7 +498,8 @@ int load_snapshot_from_blockdev(const char *filename, Error **errp)
+@@ -496,7 +496,8 @@ int load_snapshot_from_blockdev(const char *filename, Error **errp)
      blk_op_block_all(be, blocker);
  
      /* restore the VM state */

debian/patches/pve/0019-PVE-block-add-the-zeroinit-block-driver-filter.patch

@@ -4,32 +4,33 @@ Date: Mon, 6 Apr 2020 12:16:47 +0200
 Subject: [PATCH] PVE: block: add the zeroinit block driver filter
 
 Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
-[FE: adapt to changed function signatures]
+[FE: adapt to changed function signatures
+     adhere to block graph lock requirements]
 Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
 ---
  block/meson.build |   1 +
- block/zeroinit.c  | 200 ++++++++++++++++++++++++++++++++++++++++++++++
- 2 files changed, 201 insertions(+)
+ block/zeroinit.c  | 214 ++++++++++++++++++++++++++++++++++++++++++++++
+ 2 files changed, 215 insertions(+)
  create mode 100644 block/zeroinit.c
 
 diff --git a/block/meson.build b/block/meson.build
-index 382bec0e7d..253fe49fa2 100644
+index e1f03fd773..b530e117b5 100644
 --- a/block/meson.build
 +++ b/block/meson.build
-@@ -44,6 +44,7 @@ block_ss.add(files(
-   'vmdk.c',
-   'vpc.c',
+@@ -39,6 +39,7 @@ block_ss.add(files(
+   'throttle.c',
+   'throttle-groups.c',
    'write-threshold.c',
 +  'zeroinit.c',
  ), zstd, zlib, gnutls)
  
- softmmu_ss.add(when: 'CONFIG_TCG', if_true: files('blkreplay.c'))
+ system_ss.add(when: 'CONFIG_TCG', if_true: files('blkreplay.c'))
 diff --git a/block/zeroinit.c b/block/zeroinit.c
 new file mode 100644
-index 0000000000..1257342724
+index 0000000000..696558d8d6
 --- /dev/null
 +++ b/block/zeroinit.c
-@@ -0,0 +1,200 @@
+@@ -0,0 +1,214 @@
 +/*
 + * Filter to fake a zero-initialized block device.
 + *
@@ -44,6 +45,7 @@ index 0000000000..1257342724
 +#include "qapi/error.h"
 +#include "block/block_int.h"
 +#include "block/block-io.h"
++#include "block/graph-lock.h"
 +#include "qapi/qmp/qdict.h"
 +#include "qapi/qmp/qstring.h"
 +#include "qemu/cutils.h"
@@ -94,6 +96,7 @@ index 0000000000..1257342724
 +                          Error **errp)
 +{
 +    BDRVZeroinitState *s = bs->opaque;
++    BdrvChild *file = NULL;
 +    QemuOpts *opts;
 +    Error *local_err = NULL;
 +    int ret;
@@ -109,10 +112,13 @@ index 0000000000..1257342724
 +    }
 +
 +    /* Open the raw file */
-+    bs->file = bdrv_open_child(qemu_opt_get(opts, "x-next"), options, "next",
-+                               bs, &child_of_bds,
-+                               BDRV_CHILD_FILTERED | BDRV_CHILD_PRIMARY,
-+                               false, &local_err);
++    file = bdrv_open_child(qemu_opt_get(opts, "x-next"), options, "next", bs,
++                           &child_of_bds,
++                           BDRV_CHILD_FILTERED | BDRV_CHILD_PRIMARY, false,
++                           &local_err);
++    bdrv_graph_wrlock();
++    bs->file = file;
++    bdrv_graph_wrunlock();
 +    if (local_err) {
 +        ret = -EINVAL;
 +        error_propagate(errp, local_err);
@@ -125,7 +131,9 @@ index 0000000000..1257342724
 +    ret = 0;
 +fail:
 +    if (ret < 0) {
++        bdrv_graph_wrlock();
 +        bdrv_unref_child(bs, bs->file);
++        bdrv_graph_wrunlock();
 +    }
 +    qemu_opts_del(opts);
 +    return ret;
@@ -137,19 +145,22 @@ index 0000000000..1257342724
 +    (void)s;
 +}
 +
-+static coroutine_fn int64_t zeroinit_co_getlength(BlockDriverState *bs)
++static coroutine_fn int64_t GRAPH_RDLOCK
++zeroinit_co_getlength(BlockDriverState *bs)
 +{
 +    return bdrv_co_getlength(bs->file->bs);
 +}
 +
-+static int coroutine_fn zeroinit_co_preadv(BlockDriverState *bs,
-+    int64_t offset, int64_t bytes, QEMUIOVector *qiov, BdrvRequestFlags flags)
++static int coroutine_fn GRAPH_RDLOCK
++zeroinit_co_preadv(BlockDriverState *bs, int64_t offset, int64_t bytes,
++                   QEMUIOVector *qiov, BdrvRequestFlags flags)
 +{
 +    return bdrv_co_preadv(bs->file, offset, bytes, qiov, flags);
 +}
 +
-+static int coroutine_fn zeroinit_co_pwrite_zeroes(BlockDriverState *bs, int64_t offset,
-+                                                 int64_t bytes, BdrvRequestFlags flags)
++static int coroutine_fn GRAPH_RDLOCK
++zeroinit_co_pwrite_zeroes(BlockDriverState *bs, int64_t offset, int64_t bytes,
++                          BdrvRequestFlags flags)
 +{
 +    BDRVZeroinitState *s = bs->opaque;
 +    if (offset >= s->extents)
@@ -157,8 +168,9 @@ index 0000000000..1257342724
 +    return bdrv_pwrite_zeroes(bs->file, offset, bytes, flags);
 +}
 +
-+static int coroutine_fn zeroinit_co_pwritev(BlockDriverState *bs,
-+    int64_t offset, int64_t bytes, QEMUIOVector *qiov, BdrvRequestFlags flags)
++static int coroutine_fn GRAPH_RDLOCK
++zeroinit_co_pwritev(BlockDriverState *bs, int64_t offset, int64_t bytes,
++                    QEMUIOVector *qiov, BdrvRequestFlags flags)
 +{
 +    BDRVZeroinitState *s = bs->opaque;
 +    int64_t extents = offset + bytes;
@@ -167,32 +179,35 @@ index 0000000000..1257342724
 +    return bdrv_co_pwritev(bs->file, offset, bytes, qiov, flags);
 +}
 +
-+static coroutine_fn int zeroinit_co_flush(BlockDriverState *bs)
++static coroutine_fn int GRAPH_RDLOCK
++zeroinit_co_flush(BlockDriverState *bs)
 +{
 +    return bdrv_co_flush(bs->file->bs);
 +}
 +
-+static int zeroinit_has_zero_init(BlockDriverState *bs)
++static int GRAPH_RDLOCK
++zeroinit_has_zero_init(BlockDriverState *bs)
 +{
 +    BDRVZeroinitState *s = bs->opaque;
 +    return s->has_zero_init;
 +}
 +
-+static int coroutine_fn zeroinit_co_pdiscard(BlockDriverState *bs,
-+                                             int64_t offset, int64_t bytes)
++static int coroutine_fn GRAPH_RDLOCK
++zeroinit_co_pdiscard(BlockDriverState *bs, int64_t offset, int64_t bytes)
 +{
 +    return bdrv_co_pdiscard(bs->file, offset, bytes);
 +}
 +
-+static int zeroinit_co_truncate(BlockDriverState *bs, int64_t offset,
-+                                _Bool exact, PreallocMode prealloc,
-+                                BdrvRequestFlags req_flags, Error **errp)
++static int GRAPH_RDLOCK
++zeroinit_co_truncate(BlockDriverState *bs, int64_t offset, _Bool exact,
++                     PreallocMode prealloc, BdrvRequestFlags req_flags,
++                     Error **errp)
 +{
 +    return bdrv_co_truncate(bs->file, offset, exact, prealloc, req_flags, errp);
 +}
 +
-+static coroutine_fn int zeroinit_co_get_info(BlockDriverState *bs,
-+                                             BlockDriverInfo *bdi)
++static coroutine_fn int GRAPH_RDLOCK
++zeroinit_co_get_info(BlockDriverState *bs, BlockDriverInfo *bdi)
 +{
 +    return bdrv_co_get_info(bs->file->bs, bdi);
 +}

debian/patches/pve/0020-PVE-Add-dummy-id-command-line-parameter.patch

@@ -10,14 +10,14 @@ Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
 Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
 ---
  qemu-options.hx | 3 +++
- softmmu/vl.c    | 8 ++++++++
+ system/vl.c     | 8 ++++++++
  2 files changed, 11 insertions(+)
 
 diff --git a/qemu-options.hx b/qemu-options.hx
-index fdd551c2bb..4eb43b7bc5 100644
+index 511ab9415e..92e301d545 100644
 --- a/qemu-options.hx
 +++ b/qemu-options.hx
-@@ -1162,6 +1162,9 @@ legacy PC, they are not recommended for modern configurations.
+@@ -1237,6 +1237,9 @@ legacy PC, they are not recommended for modern configurations.
  
  ERST
  
@@ -27,11 +27,11 @@ index fdd551c2bb..4eb43b7bc5 100644
  DEF("fda", HAS_ARG, QEMU_OPTION_fda,
      "-fda/-fdb file  use 'file' as floppy disk 0/1 image\n", QEMU_ARCH_ALL)
  DEF("fdb", HAS_ARG, QEMU_OPTION_fdb, "", QEMU_ARCH_ALL)
-diff --git a/softmmu/vl.c b/softmmu/vl.c
-index 0eabc71b68..323f6a23d4 100644
---- a/softmmu/vl.c
-+++ b/softmmu/vl.c
-@@ -2648,6 +2648,7 @@ void qemu_init(int argc, char **argv)
+diff --git a/system/vl.c b/system/vl.c
+index 2738ab7c91..20ebf2c920 100644
+--- a/system/vl.c
++++ b/system/vl.c
+@@ -2748,6 +2748,7 @@ void qemu_init(int argc, char **argv)
      MachineClass *machine_class;
      bool userconfig = true;
      FILE *vmstate_dump_file = NULL;
@@ -39,7 +39,7 @@ index 0eabc71b68..323f6a23d4 100644
  
      qemu_add_opts(&qemu_drive_opts);
      qemu_add_drive_opts(&qemu_legacy_drive_opts);
-@@ -3271,6 +3272,13 @@ void qemu_init(int argc, char **argv)
+@@ -3371,6 +3372,13 @@ void qemu_init(int argc, char **argv)
                  machine_parse_property_opt(qemu_find_opts("smp-opts"),
                                             "smp", optarg);
                  break;
@@ -50,6 +50,6 @@ index 0eabc71b68..323f6a23d4 100644
 +                    exit(1);
 +                }
 +                break;
+ #ifdef CONFIG_VNC
              case QEMU_OPTION_vnc:
                  vnc_parse(optarg);
-                 break;

debian/patches/pve/0021-PVE-Config-Revert-target-i386-disable-LINT0-after-re.patch

@@ -11,10 +11,10 @@ Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
  1 file changed, 9 insertions(+)
 
 diff --git a/hw/intc/apic_common.c b/hw/intc/apic_common.c
-index 4a34f03047..59b917e50c 100644
+index d8fc1e2815..789694b8b3 100644
 --- a/hw/intc/apic_common.c
 +++ b/hw/intc/apic_common.c
-@@ -252,6 +252,15 @@ static void apic_reset_common(DeviceState *dev)
+@@ -263,6 +263,15 @@ static void apic_reset_common(DeviceState *dev)
      info->vapic_base_update(s);
  
      apic_init_reset(dev);

debian/patches/pve/0022-PVE-Up-Config-file-posix-make-locking-optiono-on-cre.patch

@@ -9,14 +9,14 @@ Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
 Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
 ---
  block/file-posix.c   | 59 ++++++++++++++++++++++++++++++--------------
- qapi/block-core.json |  3 ++-
- 2 files changed, 42 insertions(+), 20 deletions(-)
+ qapi/block-core.json |  7 +++++-
+ 2 files changed, 46 insertions(+), 20 deletions(-)
 
 diff --git a/block/file-posix.c b/block/file-posix.c
-index 9681bd0434..044890822d 100644
+index 43bc0bd520..60e98c87f1 100644
 --- a/block/file-posix.c
 +++ b/block/file-posix.c
-@@ -2483,6 +2483,7 @@ raw_co_create(BlockdevCreateOptions *options, Error **errp)
+@@ -2876,6 +2876,7 @@ raw_co_create(BlockdevCreateOptions *options, Error **errp)
      int fd;
      uint64_t perm, shared;
      int result = 0;
@@ -24,7 +24,7 @@ index 9681bd0434..044890822d 100644
  
      /* Validate options and set default values */
      assert(options->driver == BLOCKDEV_DRIVER_FILE);
-@@ -2523,19 +2524,22 @@ raw_co_create(BlockdevCreateOptions *options, Error **errp)
+@@ -2916,19 +2917,22 @@ raw_co_create(BlockdevCreateOptions *options, Error **errp)
      perm = BLK_PERM_WRITE | BLK_PERM_RESIZE;
      shared = BLK_PERM_ALL & ~BLK_PERM_RESIZE;
  
@@ -59,7 +59,7 @@ index 9681bd0434..044890822d 100644
      }
  
      /* Clear the file by truncating it to 0 */
-@@ -2589,13 +2593,15 @@ raw_co_create(BlockdevCreateOptions *options, Error **errp)
+@@ -2982,13 +2986,15 @@ raw_co_create(BlockdevCreateOptions *options, Error **errp)
      }
  
  out_unlock:
@@ -82,7 +82,7 @@ index 9681bd0434..044890822d 100644
      }
  
  out_close:
-@@ -2619,6 +2625,7 @@ raw_co_create_opts(BlockDriver *drv, const char *filename,
+@@ -3012,6 +3018,7 @@ raw_co_create_opts(BlockDriver *drv, const char *filename,
      PreallocMode prealloc;
      char *buf = NULL;
      Error *local_err = NULL;
@@ -90,7 +90,7 @@ index 9681bd0434..044890822d 100644
  
      /* Skip file: protocol prefix */
      strstart(filename, "file:", &filename);
-@@ -2641,6 +2648,18 @@ raw_co_create_opts(BlockDriver *drv, const char *filename,
+@@ -3034,6 +3041,18 @@ raw_co_create_opts(BlockDriver *drv, const char *filename,
          return -EINVAL;
      }
  
@@ -109,7 +109,7 @@ index 9681bd0434..044890822d 100644
      options = (BlockdevCreateOptions) {
          .driver     = BLOCKDEV_DRIVER_FILE,
          .u.file     = {
-@@ -2652,6 +2671,8 @@ raw_co_create_opts(BlockDriver *drv, const char *filename,
+@@ -3045,6 +3064,8 @@ raw_co_create_opts(BlockDriver *drv, const char *filename,
              .nocow              = nocow,
              .has_extent_size_hint = has_extent_size_hint,
              .extent_size_hint   = extent_size_hint,
@@ -119,10 +119,21 @@ index 9681bd0434..044890822d 100644
      };
      return raw_co_create(&options, errp);
 diff --git a/qapi/block-core.json b/qapi/block-core.json
-index 3c945c1f93..542add004b 100644
+index 45ab548dfe..f7c2b63c5d 100644
 --- a/qapi/block-core.json
 +++ b/qapi/block-core.json
-@@ -4740,7 +4740,8 @@
+@@ -4956,6 +4956,10 @@
+ # @extent-size-hint: Extent size hint to add to the image file; 0 for
+ #     not adding an extent size hint (default: 1 MB, since 5.1)
+ #
++# @locking: whether to enable file locking.  If set to 'auto', only
++#     enable when Open File Descriptor (OFD) locking API is available
++#     (default: auto).
++#
+ # Since: 2.12
+ ##
+ { 'struct': 'BlockdevCreateOptionsFile',
+@@ -4963,7 +4967,8 @@
              'size':                 'size',
              '*preallocation':       'PreallocMode',
              '*nocow':               'bool',

debian/patches/pve/0023-PVE-monitor-disable-oob-capability.patch

@@ -18,10 +18,10 @@ Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
  1 file changed, 1 insertion(+), 2 deletions(-)
 
 diff --git a/monitor/qmp.c b/monitor/qmp.c
-index 6b8cfcf6d8..3ec67e32d3 100644
+index 589c9524f8..2505dd658a 100644
 --- a/monitor/qmp.c
 +++ b/monitor/qmp.c
-@@ -519,8 +519,7 @@ void monitor_init_qmp(Chardev *chr, bool pretty, Error **errp)
+@@ -536,8 +536,7 @@ void monitor_init_qmp(Chardev *chr, bool pretty, Error **errp)
      qemu_chr_fe_set_echo(&mon->common.chr, true);
  
      /* Note: we run QMP monitor in I/O thread when @chr supports that */

debian/patches/pve/0024-PVE-Compat-4.0-used-balloon-qemu-4-0-config-size-fal.patch

@@ -26,10 +26,10 @@ Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
  1 file changed, 2 insertions(+), 1 deletion(-)
 
 diff --git a/hw/core/machine.c b/hw/core/machine.c
-index 2f6ccf5623..a5927e92f1 100644
+index 4273de16a0..83f1fc0293 100644
 --- a/hw/core/machine.c
 +++ b/hw/core/machine.c
-@@ -142,7 +142,8 @@ GlobalProperty hw_compat_4_0[] = {
+@@ -162,7 +162,8 @@ GlobalProperty hw_compat_4_0[] = {
      { "virtio-vga",     "edid", "false" },
      { "virtio-gpu-device", "edid", "false" },
      { "virtio-device", "use-started", "false" },

debian/patches/pve/0025-PVE-Allow-version-code-in-machine-type.patch

@@ -17,14 +17,14 @@ Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
  hw/core/machine-qmp-cmds.c |  5 +++++
  include/hw/boards.h        |  2 ++
  qapi/machine.json          |  4 +++-
- softmmu/vl.c               | 25 +++++++++++++++++++++++++
+ system/vl.c                | 25 +++++++++++++++++++++++++
  4 files changed, 35 insertions(+), 1 deletion(-)
 
 diff --git a/hw/core/machine-qmp-cmds.c b/hw/core/machine-qmp-cmds.c
-index 24595f618c..ee9cb0cd04 100644
+index 314351cdff..628a3537c5 100644
 --- a/hw/core/machine-qmp-cmds.c
 +++ b/hw/core/machine-qmp-cmds.c
-@@ -107,6 +107,11 @@ MachineInfoList *qmp_query_machines(Error **errp)
+@@ -94,6 +94,11 @@ MachineInfoList *qmp_query_machines(Error **errp)
          if (strcmp(mc->name, MACHINE_GET_CLASS(current_machine)->name) == 0) {
              info->has_is_current = true;
              info->is_current = true;
@@ -37,10 +37,10 @@ index 24595f618c..ee9cb0cd04 100644
  
          if (mc->default_cpu_type) {
 diff --git a/include/hw/boards.h b/include/hw/boards.h
-index 6fbbfd56c8..61a526e97d 100644
+index 8b8f6d5c00..dd6d0a1447 100644
 --- a/include/hw/boards.h
 +++ b/include/hw/boards.h
-@@ -232,6 +232,8 @@ struct MachineClass {
+@@ -246,6 +246,8 @@ struct MachineClass {
      const char *desc;
      const char *deprecation_reason;
  
@@ -50,10 +50,10 @@ index 6fbbfd56c8..61a526e97d 100644
      void (*reset)(MachineState *state, ShutdownCause reason);
      void (*wakeup)(MachineState *state);
 diff --git a/qapi/machine.json b/qapi/machine.json
-index c904280085..47f3facdb2 100644
+index a024d5b05d..1d69bffaa0 100644
 --- a/qapi/machine.json
 +++ b/qapi/machine.json
-@@ -159,6 +159,8 @@
+@@ -168,6 +168,8 @@
  #
  # @acpi: machine type supports ACPI (since 8.0)
  #
@@ -62,7 +62,7 @@ index c904280085..47f3facdb2 100644
  # Since: 1.2
  ##
  { 'struct': 'MachineInfo',
-@@ -166,7 +168,7 @@
+@@ -175,7 +177,7 @@
              '*is-default': 'bool', '*is-current': 'bool', 'cpu-max': 'int',
              'hotpluggable-cpus': 'bool',  'numa-mem-supported': 'bool',
              'deprecated': 'bool', '*default-cpu-type': 'str',
@@ -71,19 +71,19 @@ index c904280085..47f3facdb2 100644
  
  ##
  # @query-machines:
-diff --git a/softmmu/vl.c b/softmmu/vl.c
-index 323f6a23d4..25abdc9da7 100644
---- a/softmmu/vl.c
-+++ b/softmmu/vl.c
-@@ -1578,6 +1578,7 @@ static const QEMUOption *lookup_opt(int argc, char **argv,
+diff --git a/system/vl.c b/system/vl.c
+index 20ebf2c920..4d39e32097 100644
+--- a/system/vl.c
++++ b/system/vl.c
+@@ -1659,6 +1659,7 @@ static const QEMUOption *lookup_opt(int argc, char **argv,
  static MachineClass *select_machine(QDict *qdict, Error **errp)
  {
-     const char *optarg = qdict_get_try_str(qdict, "type");
+     const char *machine_type = qdict_get_try_str(qdict, "type");
 +    const char *pvever = qdict_get_try_str(qdict, "pvever");
      GSList *machines = object_class_get_list(TYPE_MACHINE, false);
      MachineClass *machine_class;
      Error *local_err = NULL;
-@@ -1595,6 +1596,11 @@ static MachineClass *select_machine(QDict *qdict, Error **errp)
+@@ -1676,6 +1677,11 @@ static MachineClass *select_machine(QDict *qdict, Error **errp)
          }
      }
  
@@ -95,7 +95,7 @@ index 323f6a23d4..25abdc9da7 100644
      g_slist_free(machines);
      if (local_err) {
          error_append_hint(&local_err, "Use -machine help to list supported machines\n");
-@@ -3213,12 +3219,31 @@ void qemu_init(int argc, char **argv)
+@@ -3313,12 +3319,31 @@ void qemu_init(int argc, char **argv)
              case QEMU_OPTION_machine:
                  {
                      bool help;

debian/patches/pve/0026-block-backup-move-bcs-bitmap-initialization-to-job-c.patch

@@ -25,7 +25,7 @@ Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
  1 file changed, 4 insertions(+), 4 deletions(-)
 
 diff --git a/block/backup.c b/block/backup.c
-index db3791f4d1..39410dcf8d 100644
+index ec29d6b810..270957c0cd 100644
 --- a/block/backup.c
 +++ b/block/backup.c
 @@ -237,8 +237,8 @@ static void backup_init_bcs_bitmap(BackupBlockJob *job)
@@ -48,9 +48,9 @@ index db3791f4d1..39410dcf8d 100644
      if (s->sync_mode == MIRROR_SYNC_MODE_TOP) {
          int64_t offset = 0;
          int64_t count;
-@@ -495,6 +493,8 @@ BlockJob *backup_job_create(const char *job_id, BlockDriverState *bs,
-     block_job_add_bdrv(&job->common, "target", target, 0, BLK_PERM_ALL,
+@@ -501,6 +499,8 @@ BlockJob *backup_job_create(const char *job_id, BlockDriverState *bs,
                         &error_abort);
+     bdrv_graph_wrunlock();
  
 +    backup_init_bcs_bitmap(job);
 +

debian/patches/pve/0027-PVE-Backup-add-vma-backup-format-code.patch

@@ -15,34 +15,34 @@ Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
 ---
  block/meson.build |   2 +
  meson.build       |   5 +
- vma-reader.c      | 867 +++++++++++++++++++++++++++++++++++++++++++++
- vma-writer.c      | 793 +++++++++++++++++++++++++++++++++++++++++
- vma.c             | 878 ++++++++++++++++++++++++++++++++++++++++++++++
+ vma-reader.c      | 870 ++++++++++++++++++++++++++++++++++++++++++++
+ vma-writer.c      | 818 +++++++++++++++++++++++++++++++++++++++++
+ vma.c             | 901 ++++++++++++++++++++++++++++++++++++++++++++++
  vma.h             | 150 ++++++++
- 6 files changed, 2695 insertions(+)
+ 6 files changed, 2746 insertions(+)
  create mode 100644 vma-reader.c
  create mode 100644 vma-writer.c
  create mode 100644 vma.c
  create mode 100644 vma.h
 
 diff --git a/block/meson.build b/block/meson.build
-index 253fe49fa2..744b698a82 100644
+index b530e117b5..b245daa98e 100644
 --- a/block/meson.build
 +++ b/block/meson.build
-@@ -47,6 +47,8 @@ block_ss.add(files(
+@@ -42,6 +42,8 @@ block_ss.add(files(
    'zeroinit.c',
  ), zstd, zlib, gnutls)
  
 +block_ss.add(files('../vma-writer.c'), libuuid)
 +
- softmmu_ss.add(when: 'CONFIG_TCG', if_true: files('blkreplay.c'))
- softmmu_ss.add(files('block-ram-registrar.c'))
+ system_ss.add(when: 'CONFIG_TCG', if_true: files('blkreplay.c'))
+ system_ss.add(files('block-ram-registrar.c'))
  
 diff --git a/meson.build b/meson.build
-index 30447cfaef..38a4e2bcef 100644
+index 91a0aa64c6..620cc594b2 100644
 --- a/meson.build
 +++ b/meson.build
-@@ -1527,6 +1527,8 @@ keyutils = dependency('libkeyutils', required: false,
+@@ -1922,6 +1922,8 @@ endif
  
  has_gettid = cc.has_function('gettid')
  
@@ -51,7 +51,7 @@ index 30447cfaef..38a4e2bcef 100644
  # libselinux
  selinux = dependency('libselinux',
                       required: get_option('selinux'),
-@@ -3650,6 +3652,9 @@ if have_tools
+@@ -4023,6 +4025,9 @@ if have_tools
                 dependencies: [blockdev, qemuutil, gnutls, selinux],
                 install: true)
  
@@ -59,14 +59,14 @@ index 30447cfaef..38a4e2bcef 100644
 +                   dependencies: [authz, block, crypto, io, qom], install: true)
 +
    subdir('storage-daemon')
-   subdir('contrib/rdmacm-mux')
-   subdir('contrib/elf2dmp')
+ 
+   foreach exe: [ 'qemu-img', 'qemu-io', 'qemu-nbd', 'qemu-storage-daemon']
 diff --git a/vma-reader.c b/vma-reader.c
 new file mode 100644
-index 0000000000..81a891c6b1
+index 0000000000..d0b6721812
 --- /dev/null
 +++ b/vma-reader.c
-@@ -0,0 +1,867 @@
+@@ -0,0 +1,870 @@
 +/*
 + * VMA: Virtual Machine Archive
 + *
@@ -88,6 +88,7 @@ index 0000000000..81a891c6b1
 +#include "qemu/ratelimit.h"
 +#include "vma.h"
 +#include "block/block.h"
++#include "block/graph-lock.h"
 +#include "sysemu/block-backend.h"
 +
 +static unsigned char zero_vma_block[VMA_BLOCK_SIZE];
@@ -600,8 +601,10 @@ index 0000000000..81a891c6b1
 +    } else {
 +        int res = blk_pwrite(target, sector_num * BDRV_SECTOR_SIZE, nb_sectors * BDRV_SECTOR_SIZE, buf, 0);
 +        if (res < 0) {
++            bdrv_graph_rdlock_main_loop();
 +            error_setg(errp, "blk_pwrite to %s failed (%d)",
 +                       bdrv_get_device_name(blk_bs(target)), res);
++            bdrv_graph_rdunlock_main_loop();
 +            return -1;
 +        }
 +    }
@@ -936,10 +939,10 @@ index 0000000000..81a891c6b1
 +
 diff --git a/vma-writer.c b/vma-writer.c
 new file mode 100644
-index 0000000000..ac7da237d0
+index 0000000000..126b296647
 --- /dev/null
 +++ b/vma-writer.c
-@@ -0,0 +1,793 @@
+@@ -0,0 +1,818 @@
 +/*
 + * VMA: Virtual Machine Archive
 + *
@@ -955,6 +958,8 @@ index 0000000000..ac7da237d0
 +
 +#include "qemu/osdep.h"
 +#include <glib.h>
++#include <linux/magic.h>
++#include <sys/vfs.h>
 +#include <uuid/uuid.h>
 +
 +#include "vma.h"
@@ -963,6 +968,7 @@ index 0000000000..ac7da237d0
 +#include "qemu/main-loop.h"
 +#include "qemu/coroutine.h"
 +#include "qemu/cutils.h"
++#include "qemu/error-report.h"
 +#include "qemu/memalign.h"
 +
 +#define DEBUG_VMA 0
@@ -1146,10 +1152,10 @@ index 0000000000..ac7da237d0
 +{
 +    assert(qemu_in_coroutine());
 +    AioContext *ctx = qemu_get_current_aio_context();
-+    aio_set_fd_handler(ctx, fd, false, NULL, (IOHandler *)qemu_coroutine_enter,
-+                       NULL, NULL, qemu_coroutine_self());
++    aio_set_fd_handler(ctx, fd, NULL, (IOHandler *)qemu_coroutine_enter, NULL,
++                       NULL, qemu_coroutine_self());
 +    qemu_coroutine_yield();
-+    aio_set_fd_handler(ctx, fd, false, NULL, NULL, NULL, NULL, NULL);
++    aio_set_fd_handler(ctx, fd, NULL, NULL, NULL, NULL, NULL);
 +}
 +
 +static ssize_t coroutine_fn
@@ -1198,6 +1204,23 @@ index 0000000000..ac7da237d0
 +    return (done == bytes) ? bytes : -1;
 +}
 +
++static bool is_path_tmpfs(const char *path) {
++    struct statfs fs;
++    int ret;
++
++    do {
++        ret = statfs(path, &fs);
++    } while (ret != 0 && errno == EINTR);
++
++    if (ret != 0) {
++        warn_report("statfs call for %s failed, assuming not tmpfs - %s\n",
++                    path, strerror(errno));
++        return false;
++    }
++
++    return fs.f_type == TMPFS_MAGIC;
++}
++
 +VmaWriter *vma_writer_create(const char *filename, uuid_t uuid, Error **errp)
 +{
 +    const char *p;
@@ -1247,8 +1270,13 @@ index 0000000000..ac7da237d0
 +            }
 +            /* try to use O_NONBLOCK */
 +            fcntl(vmaw->fd, F_SETFL, fcntl(vmaw->fd, F_GETFL)|O_NONBLOCK);
-+        } else  {
-+            oflags = O_NONBLOCK|O_DIRECT|O_WRONLY|O_EXCL;
++        } else {
++            gchar *dirname = g_path_get_dirname(filename);
++            oflags = O_NONBLOCK|O_WRONLY|O_EXCL;
++            if (!is_path_tmpfs(dirname)) {
++                oflags |= O_DIRECT;
++            }
++            g_free(dirname);
 +            vmaw->fd = qemu_create(filename, oflags, 0644, errp);
 +        }
 +
@@ -1735,10 +1763,10 @@ index 0000000000..ac7da237d0
 +}
 diff --git a/vma.c b/vma.c
 new file mode 100644
-index 0000000000..304f02bc84
+index 0000000000..bb715e9061
 --- /dev/null
 +++ b/vma.c
-@@ -0,0 +1,878 @@
+@@ -0,0 +1,901 @@
 +/*
 + * VMA: Virtual Machine Archive
 + *
@@ -1772,7 +1800,7 @@ index 0000000000..304f02bc84
 +        "vma list <filename>\n"
 +        "vma config <filename> [-c config]\n"
 +        "vma create <filename> [-c config] pathname ...\n"
-+        "vma extract <filename> [-r <fifo>] <targetdir>\n"
++        "vma extract <filename> [-d <drive-list>] [-r <fifo>] <targetdir>\n"
 +        "vma verify <filename> [-v]\n"
 +        ;
 +
@@ -1917,9 +1945,10 @@ index 0000000000..304f02bc84
 +    const char *filename;
 +    const char *dirname;
 +    const char *readmap = NULL;
++    gchar **drive_list = NULL;
 +
 +    for (;;) {
-+        c = getopt(argc, argv, "hvr:");
++        c = getopt(argc, argv, "hvd:r:");
 +        if (c == -1) {
 +            break;
 +        }
@@ -1928,6 +1957,9 @@ index 0000000000..304f02bc84
 +        case 'h':
 +            help();
 +            break;
++        case 'd':
++            drive_list = g_strsplit(optarg, ",", 254);
++            break;
 +        case 'r':
 +            readmap = optarg;
 +            break;
@@ -2047,29 +2079,29 @@ index 0000000000..304f02bc84
 +                        inbuf);
 +            }
 +
-+            RestoreMap *map = g_new0(RestoreMap, 1);
-+            map->devname = g_strdup(devname);
-+            map->path = g_strdup(path);
-+            map->format = format;
-+            map->throttling_bps = bps_value;
-+            map->throttling_group = group;
-+            map->cache = cache;
-+            map->write_zero = write_zero;
-+            map->skip = skip;
++            RestoreMap *restore_map = g_new0(RestoreMap, 1);
++            restore_map->devname = g_strdup(devname);
++            restore_map->path = g_strdup(path);
++            restore_map->format = format;
++            restore_map->throttling_bps = bps_value;
++            restore_map->throttling_group = group;
++            restore_map->cache = cache;
++            restore_map->write_zero = write_zero;
++            restore_map->skip = skip;
 +
-+            g_hash_table_insert(devmap, map->devname, map);
++            g_hash_table_insert(devmap, restore_map->devname, restore_map);
 +
 +        };
 +    }
 +
 +    int i;
 +    int vmstate_fd = -1;
-+    guint8 vmstate_stream = 0;
++    bool drive_rename_bitmap[255];
++    memset(drive_rename_bitmap, 0, sizeof(drive_rename_bitmap));
 +
 +    for (i = 1; i < 255; i++) {
 +        VmaDeviceInfo *di = vma_reader_get_device_info(vmar, i);
 +        if (di && (strcmp(di->devname, "vmstate") == 0)) {
-+            vmstate_stream = i;
 +            char *statefn = g_strdup_printf("%s/vmstate.bin", dirname);
 +            vmstate_fd = open(statefn, O_WRONLY|O_CREAT|O_EXCL, 0644);
 +            if (vmstate_fd < 0) {
@@ -2089,7 +2121,21 @@ index 0000000000..304f02bc84
 +
 +            BlockBackend *blk = NULL;
 +
-+            if (readmap) {
++            if (drive_list) {
++                skip = true;
++                int j;
++                for (j = 0; drive_list[j]; j++) {
++                    if (strcmp(drive_list[j], di->devname) == 0) {
++                        skip = false;
++                        drive_rename_bitmap[i] = true;
++                        break;
++                    }
++                }
++            } else {
++                drive_rename_bitmap[i] = true;
++            }
++
++            if (!skip && readmap) {
 +                RestoreMap *map;
 +                map = (RestoreMap *)g_hash_table_lookup(devmap, di->devname);
 +                if (map == NULL) {
@@ -2102,7 +2148,7 @@ index 0000000000..304f02bc84
 +                cache = map->cache;
 +                write_zero = map->write_zero;
 +                skip = map->skip;
-+            } else {
++            } else if (!skip) {
 +                devfn = g_strdup_printf("%s/tmp-disk-%s.raw",
 +                                        dirname, di->devname);
 +                printf("DEVINFO %s %zd\n", devfn, di->size);
@@ -2183,6 +2229,10 @@ index 0000000000..304f02bc84
 +        }
 +    }
 +
++    if (drive_list) {
++        g_strfreev(drive_list);
++    }
++
 +    if (vma_reader_restore(vmar, vmstate_fd, verbose, &errp) < 0) {
 +        g_error("restore failed - %s", error_get_pretty(errp));
 +    }
@@ -2190,7 +2240,7 @@ index 0000000000..304f02bc84
 +    if (!readmap) {
 +        for (i = 1; i < 255; i++) {
 +            VmaDeviceInfo *di = vma_reader_get_device_info(vmar, i);
-+            if (di && (i != vmstate_stream)) {
++            if (di && drive_rename_bitmap[i]) {
 +                char *tmpfn = g_strdup_printf("%s/tmp-disk-%s.raw",
 +                                              dirname, di->devname);
 +                char *fn = g_strdup_printf("%s/disk-%s.raw",
@@ -2314,13 +2364,13 @@ index 0000000000..304f02bc84
 +        ret = blk_co_preadv(job->target, start * VMA_CLUSTER_SIZE,
 +                            readlen, &qiov, 0);
 +        if (ret < 0) {
-+            vma_writer_set_error(job->vmaw, "read error", -1);
++            vma_writer_set_error(job->vmaw, "read error");
 +            goto out;
 +        }
 +
 +        size_t zb = 0;
 +        if (vma_writer_write(job->vmaw, job->dev_id, start, buf, &zb) < 0) {
-+            vma_writer_set_error(job->vmaw, "backup_dump_cb vma_writer_write failed", -1);
++            vma_writer_set_error(job->vmaw, "backup_dump_cb vma_writer_write failed");
 +            goto out;
 +        }
 +    }
@@ -2338,7 +2388,7 @@ index 0000000000..304f02bc84
 +
 +static int create_archive(int argc, char **argv)
 +{
-+    int i, c;
++    int c;
 +    int verbose = 0;
 +    const char *archivename;
 +    GList *backup_coroutines = NULL;
@@ -2496,6 +2546,7 @@ index 0000000000..304f02bc84
 +    vma_writer_get_status(vmaw, &vmastat);
 +
 +    if (verbose) {
++        int i;
 +        for (i = 0; i < 256; i++) {
 +            VmaStreamInfo *si = &vmastat.stream_info[i];
 +            if (si->size) {
@@ -2619,7 +2670,7 @@ index 0000000000..304f02bc84
 +}
 diff --git a/vma.h b/vma.h
 new file mode 100644
-index 0000000000..1b62859165
+index 0000000000..86d2873aa5
 --- /dev/null
 +++ b/vma.h
 @@ -0,0 +1,150 @@
@@ -2757,7 +2808,7 @@ index 0000000000..1b62859165
 +int coroutine_fn vma_writer_flush_output(VmaWriter *vmaw);
 +
 +int vma_writer_get_status(VmaWriter *vmaw, VmaStatus *status);
-+void vma_writer_set_error(VmaWriter *vmaw, const char *fmt, ...);
++void vma_writer_set_error(VmaWriter *vmaw, const char *fmt, ...) G_GNUC_PRINTF(2, 3);
 +
 +
 +VmaReader *vma_reader_create(const char *filename, Error **errp);

debian/patches/pve/0028-PVE-Backup-add-backup-dump-block-driver.patch

@@ -12,20 +12,20 @@ Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
 [FE: adapt to coroutine changes]
 Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
 ---
- block/backup-dump.c              | 168 +++++++++++++++++++++++++++++++
+ block/backup-dump.c              | 172 +++++++++++++++++++++++++++++++
  block/backup.c                   |  30 ++----
  block/meson.build                |   1 +
  include/block/block_int-common.h |  35 +++++++
  job.c                            |   3 +-
- 5 files changed, 214 insertions(+), 23 deletions(-)
+ 5 files changed, 218 insertions(+), 23 deletions(-)
  create mode 100644 block/backup-dump.c
 
 diff --git a/block/backup-dump.c b/block/backup-dump.c
 new file mode 100644
-index 0000000000..232a094426
+index 0000000000..e46abf1070
 --- /dev/null
 +++ b/block/backup-dump.c
-@@ -0,0 +1,168 @@
+@@ -0,0 +1,172 @@
 +/*
 + * BlockDriver to send backup data stream to a callback function
 + *
@@ -37,6 +37,8 @@ index 0000000000..232a094426
 + */
 +
 +#include "qemu/osdep.h"
++
++#include "qapi/qmp/qdict.h"
 +#include "qom/object_interfaces.h"
 +#include "block/block_int.h"
 +
@@ -169,7 +171,7 @@ index 0000000000..232a094426
 +block_init(bdrv_backup_dump_init);
 +
 +
-+BlockDriverState *bdrv_backup_dump_create(
++BlockDriverState *coroutine_fn bdrv_co_backup_dump_create(
 +    int dump_cb_block_size,
 +    uint64_t byte_size,
 +    BackupDumpFunc *dump_cb,
@@ -177,9 +179,11 @@ index 0000000000..232a094426
 +    Error **errp)
 +{
 +    BDRVBackupDumpState *state;
-+    BlockDriverState *bs = bdrv_new_open_driver(
-+        &bdrv_backup_dump_drive, NULL, BDRV_O_RDWR, errp);
 +
++    QDict *options = qdict_new();
++    qdict_put_str(options, "driver", "backup-dump-drive");
++
++    BlockDriverState *bs = bdrv_co_open(NULL, NULL, options, BDRV_O_RDWR, errp);
 +    if (!bs) {
 +        return NULL;
 +    }
@@ -195,7 +199,7 @@ index 0000000000..232a094426
 +    return bs;
 +}
 diff --git a/block/backup.c b/block/backup.c
-index 39410dcf8d..af87fa6aa9 100644
+index 270957c0cd..16d611c4ca 100644
 --- a/block/backup.c
 +++ b/block/backup.c
 @@ -29,28 +29,6 @@
@@ -227,7 +231,7 @@ index 39410dcf8d..af87fa6aa9 100644
  static const BlockJobDriver backup_job_driver;
  
  static void backup_cleanup_sync_bitmap(BackupBlockJob *job, int ret)
-@@ -457,6 +435,14 @@ BlockJob *backup_job_create(const char *job_id, BlockDriverState *bs,
+@@ -461,6 +439,14 @@ BlockJob *backup_job_create(const char *job_id, BlockDriverState *bs,
      }
  
      cluster_size = block_copy_cluster_size(bcs);
@@ -243,7 +247,7 @@ index 39410dcf8d..af87fa6aa9 100644
      if (perf->max_chunk && perf->max_chunk < cluster_size) {
          error_setg(errp, "Required max-chunk (%" PRIi64 ") is less than backup "
 diff --git a/block/meson.build b/block/meson.build
-index 744b698a82..f580f95395 100644
+index b245daa98e..e99914eaa4 100644
 --- a/block/meson.build
 +++ b/block/meson.build
 @@ -4,6 +4,7 @@ block_ss.add(files(
@@ -251,11 +255,11 @@ index 744b698a82..f580f95395 100644
    'amend.c',
    'backup.c',
 +  'backup-dump.c',
-   'copy-before-write.c',
    'blkdebug.c',
    'blklogwrites.c',
+   'blkverify.c',
 diff --git a/include/block/block_int-common.h b/include/block/block_int-common.h
-index f01bb8b617..d7ffd1826e 100644
+index 761276127e..b3e6697613 100644
 --- a/include/block/block_int-common.h
 +++ b/include/block/block_int-common.h
 @@ -26,6 +26,7 @@
@@ -272,7 +276,7 @@ index f01bb8b617..d7ffd1826e 100644
  
 +typedef int BackupDumpFunc(void *opaque, uint64_t offset, uint64_t bytes, const void *buf);
 +
-+BlockDriverState *bdrv_backup_dump_create(
++BlockDriverState *coroutine_fn bdrv_co_backup_dump_create(
 +    int dump_cb_block_size,
 +    uint64_t byte_size,
 +    BackupDumpFunc *dump_cb,
@@ -308,10 +312,10 @@ index f01bb8b617..d7ffd1826e 100644
      BDRV_TRACKED_READ,
      BDRV_TRACKED_WRITE,
 diff --git a/job.c b/job.c
-index 72d57f0934..93e22d180b 100644
+index 660ce22c56..baf54c8d60 100644
 --- a/job.c
 +++ b/job.c
-@@ -330,7 +330,8 @@ static bool job_started_locked(Job *job)
+@@ -331,7 +331,8 @@ static bool job_started_locked(Job *job)
  }
  
  /* Called with job_mutex held. */

debian/patches/pve/0029-PVE-Add-sequential-job-transaction-support.patch

@@ -11,10 +11,10 @@ Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
  2 files changed, 46 insertions(+)
 
 diff --git a/include/qemu/job.h b/include/qemu/job.h
-index e502787dd8..963cf2bef5 100644
+index 2b873f2576..528cd6acb9 100644
 --- a/include/qemu/job.h
 +++ b/include/qemu/job.h
-@@ -381,6 +381,18 @@ void job_unlock(void);
+@@ -362,6 +362,18 @@ void job_unlock(void);
   */
  JobTxn *job_txn_new(void);
  
@@ -34,10 +34,10 @@ index e502787dd8..963cf2bef5 100644
   * Release a reference that was previously acquired with job_txn_add_job or
   * job_txn_new. If it's the last reference to the object, it will be freed.
 diff --git a/job.c b/job.c
-index 93e22d180b..2b31f1e14f 100644
+index baf54c8d60..3ac5e5cde2 100644
 --- a/job.c
 +++ b/job.c
-@@ -93,6 +93,8 @@ struct JobTxn {
+@@ -94,6 +94,8 @@ struct JobTxn {
  
      /* Reference count */
      int refcnt;
@@ -46,7 +46,7 @@ index 93e22d180b..2b31f1e14f 100644
  };
  
  void job_lock(void)
-@@ -118,6 +120,25 @@ JobTxn *job_txn_new(void)
+@@ -119,6 +121,25 @@ JobTxn *job_txn_new(void)
      return txn;
  }
  
@@ -72,7 +72,7 @@ index 93e22d180b..2b31f1e14f 100644
  /* Called with job_mutex held. */
  static void job_txn_ref_locked(JobTxn *txn)
  {
-@@ -1057,6 +1078,12 @@ static void job_completed_txn_success_locked(Job *job)
+@@ -1042,6 +1063,12 @@ static void job_completed_txn_success_locked(Job *job)
       */
      QLIST_FOREACH(other_job, &txn->jobs, txn_list) {
          if (!job_is_completed_locked(other_job)) {
@@ -85,7 +85,7 @@ index 93e22d180b..2b31f1e14f 100644
              return;
          }
          assert(other_job->ret == 0);
-@@ -1268,6 +1295,13 @@ int job_finish_sync_locked(Job *job,
+@@ -1253,6 +1280,13 @@ int job_finish_sync_locked(Job *job,
          return -EBUSY;
      }
  

debian/patches/pve/0030-PVE-Backup-Proxmox-backup-patches-for-QEMU.patch

@@ -79,33 +79,35 @@ Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
      adapt for new job lock mechanism replacing AioContext locks
      adapt to QAPI changes
      improve canceling
-     allow passing max-workers setting]
+     allow passing max-workers setting
+     use malloc_trim after backup
+     create jobs in a drained section]
 Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
 ---
  block/meson.build              |    5 +
- block/monitor/block-hmp-cmds.c |   40 ++
+ block/monitor/block-hmp-cmds.c |   39 ++
  blockdev.c                     |    1 +
  hmp-commands-info.hx           |   14 +
- hmp-commands.hx                |   31 +
+ hmp-commands.hx                |   29 +
  include/monitor/hmp.h          |    3 +
  meson.build                    |    1 +
  monitor/hmp-cmds.c             |   72 +++
  proxmox-backup-client.c        |  146 +++++
  proxmox-backup-client.h        |   60 ++
- pve-backup.c                   | 1097 ++++++++++++++++++++++++++++++++
- qapi/block-core.json           |  226 +++++++
- qapi/common.json               |   13 +
- qapi/machine.json              |   15 +-
- 14 files changed, 1711 insertions(+), 13 deletions(-)
+ pve-backup.c                   | 1098 ++++++++++++++++++++++++++++++++
+ qapi/block-core.json           |  233 +++++++
+ qapi/common.json               |   14 +
+ qapi/machine.json              |   16 +-
+ 14 files changed, 1717 insertions(+), 14 deletions(-)
  create mode 100644 proxmox-backup-client.c
  create mode 100644 proxmox-backup-client.h
  create mode 100644 pve-backup.c
 
 diff --git a/block/meson.build b/block/meson.build
-index f580f95395..5bcebb934b 100644
+index e99914eaa4..6bba803f94 100644
 --- a/block/meson.build
 +++ b/block/meson.build
-@@ -49,6 +49,11 @@ block_ss.add(files(
+@@ -44,6 +44,11 @@ block_ss.add(files(
  ), zstd, zlib, gnutls)
  
  block_ss.add(files('../vma-writer.c'), libuuid)
@@ -115,13 +117,13 @@ index f580f95395..5bcebb934b 100644
 +), libproxmox_backup_qemu)
 +
  
- softmmu_ss.add(when: 'CONFIG_TCG', if_true: files('blkreplay.c'))
- softmmu_ss.add(files('block-ram-registrar.c'))
+ system_ss.add(when: 'CONFIG_TCG', if_true: files('blkreplay.c'))
+ system_ss.add(files('block-ram-registrar.c'))
 diff --git a/block/monitor/block-hmp-cmds.c b/block/monitor/block-hmp-cmds.c
-index ca2599de44..636509b83e 100644
+index d954bec6f1..5000c084c5 100644
 --- a/block/monitor/block-hmp-cmds.c
 +++ b/block/monitor/block-hmp-cmds.c
-@@ -1029,3 +1029,43 @@ void hmp_change_medium(Monitor *mon, const char *device, const char *target,
+@@ -1008,3 +1008,42 @@ void hmp_change_medium(Monitor *mon, const char *device, const char *target,
      qmp_blockdev_change_medium(device, NULL, target, arg, true, force,
                                 !!read_only, read_only_mode, errp);
  }
@@ -139,7 +141,6 @@ index ca2599de44..636509b83e 100644
 +{
 +    Error *error = NULL;
 +
-+    int dir = qdict_get_try_bool(qdict, "directory", 0);
 +    const char *backup_file = qdict_get_str(qdict, "backupfile");
 +    const char *devlist = qdict_get_try_str(qdict, "devlist");
 +    int64_t speed = qdict_get_try_int(qdict, "speed", 0);
@@ -157,7 +158,7 @@ index ca2599de44..636509b83e 100644
 +        false, false, // PBS use-dirty-bitmap
 +        false, false, // PBS compress
 +        false, false, // PBS encrypt
-+        true, dir ? BACKUP_FORMAT_DIR : BACKUP_FORMAT_VMA,
++        true, BACKUP_FORMAT_VMA,
 +        NULL, NULL,
 +        devlist, qdict_haskey(qdict, "speed"), speed,
 +        false, 0, // BackupPerf max-workers
@@ -166,7 +167,7 @@ index ca2599de44..636509b83e 100644
 +    hmp_handle_error(mon, error);
 +}
 diff --git a/blockdev.c b/blockdev.c
-index bdae211a54..315a27fc09 100644
+index d27d8c38ec..5e5dbc1da9 100644
 --- a/blockdev.c
 +++ b/blockdev.c
 @@ -37,6 +37,7 @@
@@ -178,10 +179,10 @@ index bdae211a54..315a27fc09 100644
  #include "monitor/monitor.h"
  #include "qemu/error-report.h"
 diff --git a/hmp-commands-info.hx b/hmp-commands-info.hx
-index a166bff3d5..4b75966c2e 100644
+index d5ab880492..6c97248d1b 100644
 --- a/hmp-commands-info.hx
 +++ b/hmp-commands-info.hx
-@@ -486,6 +486,20 @@ SRST
+@@ -471,6 +471,20 @@ SRST
      Show the current VM UUID.
  ERST
  
@@ -203,10 +204,10 @@ index a166bff3d5..4b75966c2e 100644
      {
          .name       = "usernet",
 diff --git a/hmp-commands.hx b/hmp-commands.hx
-index d9f9f42d11..775518fb09 100644
+index 7506de251c..d5f9c28194 100644
 --- a/hmp-commands.hx
 +++ b/hmp-commands.hx
-@@ -101,6 +101,37 @@ ERST
+@@ -101,6 +101,35 @@ ERST
  SRST
  ``block_stream``
    Copy data from a backing file into a block device.
@@ -214,11 +215,9 @@ index d9f9f42d11..775518fb09 100644
 +
 +   {
 +        .name       = "backup",
-+        .args_type  = "directory:-d,backupfile:s,speed:o?,devlist:s?",
-+        .params     = "[-d] backupfile [speed [devlist]]",
-+        .help       = "create a VM Backup."
-+		    "\n\t\t\t Use -d to dump data into a directory instead"
-+		    "\n\t\t\t of using VMA format.",
++        .args_type  = "backupfile:s,speed:o?,devlist:s?",
++        .params     = "backupfile [speed [devlist]]",
++        .help       = "create a VM backup (VMA format).",
 +        .cmd = hmp_backup,
 +        .coroutine  = true,
 +    },
@@ -245,7 +244,7 @@ index d9f9f42d11..775518fb09 100644
  
      {
 diff --git a/include/monitor/hmp.h b/include/monitor/hmp.h
-index fdf6b45fb8..e01b2201d8 100644
+index 7a7def7530..cba7afe70c 100644
 --- a/include/monitor/hmp.h
 +++ b/include/monitor/hmp.h
 @@ -32,6 +32,7 @@ void hmp_info_savevm(Monitor *mon, const QDict *qdict);
@@ -266,10 +265,10 @@ index fdf6b45fb8..e01b2201d8 100644
  void hmp_device_add(Monitor *mon, const QDict *qdict);
  void hmp_device_del(Monitor *mon, const QDict *qdict);
 diff --git a/meson.build b/meson.build
-index 38a4e2bcef..443b3238f9 100644
+index 620cc594b2..d16b97cf3c 100644
 --- a/meson.build
 +++ b/meson.build
-@@ -1528,6 +1528,7 @@ keyutils = dependency('libkeyutils', required: false,
+@@ -1923,6 +1923,7 @@ endif
  has_gettid = cc.has_function('gettid')
  
  libuuid = cc.find_library('uuid', required: true)
@@ -278,7 +277,7 @@ index 38a4e2bcef..443b3238f9 100644
  # libselinux
  selinux = dependency('libselinux',
 diff --git a/monitor/hmp-cmds.c b/monitor/hmp-cmds.c
-index 91be698308..5b9c231a4c 100644
+index ef4634e5c1..6e25279f42 100644
 --- a/monitor/hmp-cmds.c
 +++ b/monitor/hmp-cmds.c
 @@ -21,6 +21,7 @@
@@ -587,10 +586,10 @@ index 0000000000..8cbf645b2c
 +#endif /* PROXMOX_BACKUP_CLIENT_H */
 diff --git a/pve-backup.c b/pve-backup.c
 new file mode 100644
-index 0000000000..dd72ee0ed6
+index 0000000000..9c13a92623
 --- /dev/null
 +++ b/pve-backup.c
-@@ -0,0 +1,1097 @@
+@@ -0,0 +1,1098 @@
 +#include "proxmox-backup-client.h"
 +#include "vma.h"
 +
@@ -601,10 +600,15 @@ index 0000000000..dd72ee0ed6
 +#include "block/block_int-global-state.h"
 +#include "block/blockjob.h"
 +#include "block/dirty-bitmap.h"
++#include "block/graph-lock.h"
 +#include "qapi/qapi-commands-block.h"
 +#include "qapi/qmp/qerror.h"
 +#include "qemu/cutils.h"
 +
++#if defined(CONFIG_MALLOC_TRIM)
++#include <malloc.h>
++#endif
++
 +#include <proxmox-backup-qemu.h>
 +
 +/* PVE backup state and related function */
@@ -697,7 +701,7 @@ index 0000000000..dd72ee0ed6
 +    return error_or_canceled;
 +}
 +
-+static void pvebackup_add_transfered_bytes(size_t transferred, size_t zero_bytes, size_t reused)
++static void pvebackup_add_transferred_bytes(size_t transferred, size_t zero_bytes, size_t reused)
 +{
 +    qemu_mutex_lock(&backup_state.stat.lock);
 +    backup_state.stat.zero_bytes += zero_bytes;
@@ -758,7 +762,7 @@ index 0000000000..dd72ee0ed6
 +    }
 +
 +    qemu_co_mutex_unlock(&backup_state.dump_callback_mutex);
-+    pvebackup_add_transfered_bytes(size, is_zero_block ? size : 0, reused);
++    pvebackup_add_transferred_bytes(size, is_zero_block ? size : 0, reused);
 +
 +    return size;
 +}
@@ -816,11 +820,11 @@ index 0000000000..dd72ee0ed6
 +        } else {
 +            if (remaining >= VMA_CLUSTER_SIZE) {
 +                assert(ret == VMA_CLUSTER_SIZE);
-+                pvebackup_add_transfered_bytes(VMA_CLUSTER_SIZE, zero_bytes, 0);
++                pvebackup_add_transferred_bytes(VMA_CLUSTER_SIZE, zero_bytes, 0);
 +                remaining -= VMA_CLUSTER_SIZE;
 +            } else {
 +                assert(ret == remaining);
-+                pvebackup_add_transfered_bytes(remaining, zero_bytes, 0);
++                pvebackup_add_transferred_bytes(remaining, zero_bytes, 0);
 +                remaining = 0;
 +            }
 +        }
@@ -869,6 +873,14 @@ index 0000000000..dd72ee0ed6
 +    backup_state.stat.end_time = time(NULL);
 +    backup_state.stat.finishing = false;
 +    qemu_mutex_unlock(&backup_state.stat.lock);
++
++#if defined(CONFIG_MALLOC_TRIM)
++    /*
++     * Try to reclaim memory for buffers (and, in case of PBS, Rust futures), etc.
++     * Won't happen by default if there is fragmentation.
++     */
++    malloc_trim(4 * 1024 * 1024);
++#endif
 +}
 +
 +static void coroutine_fn pvebackup_co_complete_stream(void *opaque)
@@ -888,7 +900,12 @@ index 0000000000..dd72ee0ed6
 +
 +    qemu_co_mutex_lock(&backup_state.backup_mutex);
 +
-+    if (ret < 0) {
++    /*
++     * All jobs in the transaction will be canceled when one receives an error.
++     * The first error wins, so only set it for ECANCELED if it was the last
++     * job. This allows more interesting errors from other jobs to win.
++     */
++    if (ret < 0 && (ret != -ECANCELED || !g_list_nth(backup_state.di_list, 1))) {
 +        Error *local_err = NULL;
 +        error_setg(&local_err, "job failed with err %d - %s", ret, strerror(-ret));
 +        pvebackup_propagate_error(local_err);
@@ -912,13 +929,6 @@ index 0000000000..dd72ee0ed6
 +        }
 +    }
 +
-+    if (di->job) {
-+        WITH_JOB_LOCK_GUARD() {
-+            job_unref_locked(&di->job->job);
-+            di->job = NULL;
-+        }
-+    }
-+
 +    // remove self from job list
 +    backup_state.di_list = g_list_remove(backup_state.di_list, di);
 +
@@ -938,6 +948,16 @@ index 0000000000..dd72ee0ed6
 +    di->completed_ret = ret;
 +
 +    /*
++     * Needs to happen outside of coroutine, because it takes the graph write lock.
++     */
++    if (di->job) {
++        WITH_JOB_LOCK_GUARD() {
++            job_unref_locked(&di->job->job);
++            di->job = NULL;
++        }
++    }
++
++    /*
 +     * Schedule stream cleanup in async coroutine. close_image and finish might
 +     * take a while, so we can't block on them here. This way it also doesn't
 +     * matter if we're already running in a coroutine or not.
@@ -1020,7 +1040,6 @@ index 0000000000..dd72ee0ed6
 +    const char *file,
 +    const char *name,
 +    BackupFormat format,
-+    const char *backup_dir,
 +    VmaWriter *vmaw,
 +    ProxmoxBackupHandle *pbs,
 +    Error **errp)
@@ -1046,13 +1065,6 @@ index 0000000000..dd72ee0ed6
 +    } else if (format == BACKUP_FORMAT_PBS) {
 +        if (proxmox_backup_co_add_config(pbs, name, (unsigned char *)cdata, clen, errp) < 0)
 +            goto err;
-+    } else if (format == BACKUP_FORMAT_DIR) {
-+        char config_path[PATH_MAX];
-+        snprintf(config_path, PATH_MAX, "%s/%s", backup_dir, name);
-+        if (!g_file_set_contents(config_path, cdata, clen, &err)) {
-+            error_setg(errp, "unable to write config file '%s'", config_path);
-+            goto err;
-+        }
 +    }
 +
 + out:
@@ -1100,8 +1112,7 @@ index 0000000000..dd72ee0ed6
 +            sync_mode = MIRROR_SYNC_MODE_BITMAP;
 +            bitmap_mode = BITMAP_SYNC_MODE_ON_SUCCESS;
 +        }
-+        AioContext *aio_context = bdrv_get_aio_context(di->bs);
-+        aio_context_acquire(aio_context);
++        bdrv_drained_begin(di->bs);
 +
 +        BlockJob *job = backup_job_create(
 +            NULL, di->bs, di->target, backup_state.speed, sync_mode, di->bitmap,
@@ -1109,7 +1120,7 @@ index 0000000000..dd72ee0ed6
 +            BLOCKDEV_ON_ERROR_REPORT, JOB_DEFAULT, pvebackup_complete_cb, di, backup_state.txn,
 +            &local_err);
 +
-+        aio_context_release(aio_context);
++        bdrv_drained_end(di->bs);
 +
 +        di->job = job;
 +        if (job) {
@@ -1161,6 +1172,66 @@ index 0000000000..dd72ee0ed6
 +    aio_co_enter(data->ctx, data->co);
 +}
 +
++/*
++ * Returns a list of device infos, which needs to be freed by the caller. In
++ * case of an error, errp will be set, but the returned value might still be a
++ * list.
++ */
++static GList coroutine_fn GRAPH_RDLOCK *get_device_info(
++    const char *devlist,
++    Error **errp)
++{
++    gchar **devs = NULL;
++    GList *di_list = NULL;
++
++    if (devlist) {
++        devs = g_strsplit_set(devlist, ",;:", -1);
++
++        gchar **d = devs;
++        while (d && *d) {
++            BlockBackend *blk = blk_by_name(*d);
++            if (!blk) {
++                error_set(errp, ERROR_CLASS_DEVICE_NOT_FOUND,
++                          "Device '%s' not found", *d);
++                goto err;
++            }
++            BlockDriverState *bs = blk_bs(blk);
++            if (!bdrv_co_is_inserted(bs)) {
++                error_setg(errp, QERR_DEVICE_HAS_NO_MEDIUM, *d);
++                goto err;
++            }
++            PVEBackupDevInfo *di = g_new0(PVEBackupDevInfo, 1);
++            di->bs = bs;
++            di_list = g_list_append(di_list, di);
++            d++;
++        }
++    } else {
++        BdrvNextIterator it;
++
++        for (BlockDriverState *bs = bdrv_first(&it); bs; bs = bdrv_next(&it)) {
++            if (!bdrv_co_is_inserted(bs) || bdrv_is_read_only(bs)) {
++                continue;
++            }
++
++            PVEBackupDevInfo *di = g_new0(PVEBackupDevInfo, 1);
++            di->bs = bs;
++            di_list = g_list_append(di_list, di);
++        }
++    }
++
++    if (!di_list) {
++        error_set(errp, ERROR_CLASS_GENERIC_ERROR, "empty device list");
++        goto err;
++    }
++
++err:
++    if (devs) {
++        g_strfreev(devs);
++    }
++
++    return di_list;
++}
++
 +UuidInfo coroutine_fn *qmp_backup(
 +    const char *backup_file,
 +    const char *password,
@@ -1186,14 +1257,10 @@ index 0000000000..dd72ee0ed6
 +
 +    qemu_co_mutex_lock(&backup_state.backup_mutex);
 +
-+    BlockBackend *blk;
-+    BlockDriverState *bs = NULL;
-+    const char *backup_dir = NULL;
 +    Error *local_err = NULL;
 +    uuid_t uuid;
 +    VmaWriter *vmaw = NULL;
 +    ProxmoxBackupHandle *pbs = NULL;
-+    gchar **devs = NULL;
 +    GList *di_list = NULL;
 +    GList *l;
 +    UuidInfo *uuid_info;
@@ -1211,48 +1278,14 @@ index 0000000000..dd72ee0ed6
 +    /* Todo: try to auto-detect format based on file name */
 +    format = has_format ? format : BACKUP_FORMAT_VMA;
 +
-+    if (devlist) {
-+        devs = g_strsplit_set(devlist, ",;:", -1);
-+
-+        gchar **d = devs;
-+        while (d && *d) {
-+            blk = blk_by_name(*d);
-+            if (blk) {
-+                bs = blk_bs(blk);
-+                if (!bdrv_co_is_inserted(bs)) {
-+                    error_setg(errp, QERR_DEVICE_HAS_NO_MEDIUM, *d);
-+                    goto err;
-+                }
-+                PVEBackupDevInfo *di = g_new0(PVEBackupDevInfo, 1);
-+                di->bs = bs;
-+                di_list = g_list_append(di_list, di);
-+            } else {
-+                error_set(errp, ERROR_CLASS_DEVICE_NOT_FOUND,
-+                          "Device '%s' not found", *d);
-+                goto err;
-+            }
-+            d++;
-+        }
-+
-+    } else {
-+        BdrvNextIterator it;
-+
-+        bs = NULL;
-+        for (bs = bdrv_first(&it); bs; bs = bdrv_next(&it)) {
-+            if (!bdrv_co_is_inserted(bs) || bdrv_is_read_only(bs)) {
-+                continue;
-+            }
-+
-+            PVEBackupDevInfo *di = g_new0(PVEBackupDevInfo, 1);
-+            di->bs = bs;
-+            di_list = g_list_append(di_list, di);
-+        }
-+    }
-+
-+    if (!di_list) {
-+        error_set(errp, ERROR_CLASS_GENERIC_ERROR, "empty device list");
++    bdrv_graph_co_rdlock();
++    di_list = get_device_info(devlist, &local_err);
++    bdrv_graph_co_rdunlock();
++    if (local_err) {
++        error_propagate(errp, local_err);
 +        goto err;
 +    }
++    assert(di_list);
 +
 +    size_t total = 0;
 +
@@ -1260,7 +1293,11 @@ index 0000000000..dd72ee0ed6
 +    while (l) {
 +        PVEBackupDevInfo *di = (PVEBackupDevInfo *)l->data;
 +        l = g_list_next(l);
-+        if (bdrv_op_is_blocked(di->bs, BLOCK_OP_TYPE_BACKUP_SOURCE, errp)) {
++
++        bdrv_graph_co_rdlock();
++        bool blocked = bdrv_op_is_blocked(di->bs, BLOCK_OP_TYPE_BACKUP_SOURCE, errp);
++        bdrv_graph_co_rdunlock();
++        if (blocked) {
 +            goto err;
 +        }
 +
@@ -1344,7 +1381,9 @@ index 0000000000..dd72ee0ed6
 +
 +            di->block_size = dump_cb_block_size;
 +
++            bdrv_graph_co_rdlock();
 +            const char *devname = bdrv_get_device_name(di->bs);
++            bdrv_graph_co_rdunlock();
 +            PBSBitmapAction action = PBS_BITMAP_ACTION_NOT_USED;
 +            size_t dirty = di->size;
 +
@@ -1388,7 +1427,7 @@ index 0000000000..dd72ee0ed6
 +                goto err_mutex;
 +            }
 +
-+            if (!(di->target = bdrv_backup_dump_create(dump_cb_block_size, di->size, pvebackup_co_dump_pbs_cb, di, errp))) {
++            if (!(di->target = bdrv_co_backup_dump_create(dump_cb_block_size, di->size, pvebackup_co_dump_pbs_cb, di, errp))) {
 +                goto err_mutex;
 +            }
 +
@@ -1416,11 +1455,13 @@ index 0000000000..dd72ee0ed6
 +            PVEBackupDevInfo *di = (PVEBackupDevInfo *)l->data;
 +            l = g_list_next(l);
 +
-+            if (!(di->target = bdrv_backup_dump_create(VMA_CLUSTER_SIZE, di->size, pvebackup_co_dump_vma_cb, di, errp))) {
++            if (!(di->target = bdrv_co_backup_dump_create(VMA_CLUSTER_SIZE, di->size, pvebackup_co_dump_vma_cb, di, errp))) {
 +                goto err_mutex;
 +            }
 +
++            bdrv_graph_co_rdlock();
 +            const char *devname = bdrv_get_device_name(di->bs);
++            bdrv_graph_co_rdunlock();
 +            di->dev_id = vma_writer_register_stream(vmaw, devname, di->size);
 +            if (di->dev_id <= 0) {
 +                error_set(errp, ERROR_CLASS_GENERIC_ERROR,
@@ -1428,54 +1469,21 @@ index 0000000000..dd72ee0ed6
 +                goto err_mutex;
 +            }
 +        }
-+    } else if (format == BACKUP_FORMAT_DIR) {
-+        if (mkdir(backup_file, 0640) != 0) {
-+            error_setg_errno(errp, errno, "can't create directory '%s'\n",
-+                             backup_file);
-+            goto err_mutex;
-+        }
-+        backup_dir = backup_file;
-+
-+        l = di_list;
-+        while (l) {
-+            PVEBackupDevInfo *di = (PVEBackupDevInfo *)l->data;
-+            l = g_list_next(l);
-+
-+            const char *devname = bdrv_get_device_name(di->bs);
-+            snprintf(di->targetfile, PATH_MAX, "%s/%s.raw", backup_dir, devname);
-+
-+            int flags = BDRV_O_RDWR;
-+            bdrv_img_create(di->targetfile, "raw", NULL, NULL, NULL,
-+                            di->size, flags, false, &local_err);
-+            if (local_err) {
-+                error_propagate(errp, local_err);
-+                goto err_mutex;
-+            }
-+
-+            di->target = bdrv_co_open(di->targetfile, NULL, NULL, flags, &local_err);
-+            if (!di->target) {
-+                error_propagate(errp, local_err);
-+                goto err_mutex;
-+            }
-+        }
 +    } else {
 +        error_set(errp, ERROR_CLASS_GENERIC_ERROR, "unknown backup format");
 +        goto err_mutex;
 +    }
 +
-+
 +    /* add configuration file to archive */
 +    if (config_file) {
-+        if (pvebackup_co_add_config(config_file, config_name, format, backup_dir,
-+                                    vmaw, pbs, errp) != 0) {
++        if (pvebackup_co_add_config(config_file, config_name, format, vmaw, pbs, errp) != 0) {
 +            goto err_mutex;
 +        }
 +    }
 +
 +    /* add firewall file to archive */
 +    if (firewall_file) {
-+        if (pvebackup_co_add_config(firewall_file, firewall_name, format, backup_dir,
-+                                    vmaw, pbs, errp) != 0) {
++        if (pvebackup_co_add_config(firewall_file, firewall_name, format, vmaw, pbs, errp) != 0) {
 +            goto err_mutex;
 +        }
 +    }
@@ -1573,10 +1581,6 @@ index 0000000000..dd72ee0ed6
 +    g_list_free(di_list);
 +    backup_state.di_list = NULL;
 +
-+    if (devs) {
-+        g_strfreev(devs);
-+    }
-+
 +    if (vmaw) {
 +        Error *err = NULL;
 +        vma_writer_close(vmaw, &err);
@@ -1588,10 +1592,6 @@ index 0000000000..dd72ee0ed6
 +        backup_state.pbs = NULL;
 +    }
 +
-+    if (backup_dir) {
-+        rmdir(backup_dir);
-+    }
-+
 +    qemu_co_mutex_unlock(&backup_state.backup_mutex);
 +    return NULL;
 +}
@@ -1689,10 +1689,10 @@ index 0000000000..dd72ee0ed6
 +    return ret;
 +}
 diff --git a/qapi/block-core.json b/qapi/block-core.json
-index 542add004b..4ec70acf95 100644
+index f7c2b63c5d..e49c7b5bc9 100644
 --- a/qapi/block-core.json
 +++ b/qapi/block-core.json
-@@ -835,6 +835,232 @@
+@@ -851,6 +851,239 @@
  { 'command': 'query-block', 'returns': ['BlockInfo'],
    'allow-preconfig': true }
  
@@ -1742,9 +1742,12 @@ index 542add004b..4ec70acf95 100644
 +# An enumeration of supported backup formats.
 +#
 +# @vma: Proxmox vma backup format
++#
++# @pbs: Proxmox backup server format
++#
 +##
 +{ 'enum': 'BackupFormat',
-+  'data': [ 'vma', 'dir', 'pbs' ] }
++  'data': [ 'vma', 'pbs' ] }
 +
 +##
 +# @backup:
@@ -1758,6 +1761,9 @@ index 542add004b..4ec70acf95 100644
 +# @config-file: a configuration file to include into
 +#               the backup archive.
 +#
++# @firewall-file: a firewall configuration file to include into the backup
++#     archive.
++#
 +# @speed: the maximum speed, in bytes per second
 +#
 +# @devlist: list of block device names (separated by ',', ';'
@@ -1825,8 +1831,6 @@ index 542add004b..4ec70acf95 100644
 +#
 +# Cancel the current executing backup process.
 +#
-+# Returns: nothing on success
-+#
 +# Notes: This command succeeds even if there is no backup process running.
 +#
 +##
@@ -1850,6 +1854,9 @@ index 542add004b..4ec70acf95 100644
 +#
 +# @pbs-library-version: Running version of libproxmox-backup-qemu0 library.
 +#
++# @backup-max-workers: Whether the 'max-workers' @BackupPerf setting is
++#     supported or not.
++#
 +##
 +{ 'struct': 'ProxmoxSupportStatus',
 +  'data': { 'pbs-dirty-bitmap': 'bool',
@@ -1926,10 +1933,10 @@ index 542add004b..4ec70acf95 100644
  # @BlockDeviceTimedStats:
  #
 diff --git a/qapi/common.json b/qapi/common.json
-index 356db3f670..aae8a3b682 100644
+index 7558ce5430..6e3d800373 100644
 --- a/qapi/common.json
 +++ b/qapi/common.json
-@@ -206,3 +206,16 @@
+@@ -200,3 +200,17 @@
  ##
  { 'struct': 'HumanReadableText',
    'data': { 'human-readable-text': 'str' } }
@@ -1943,11 +1950,12 @@ index 356db3f670..aae8a3b682 100644
 +#
 +# Since: 0.14.0
 +#
-+# Notes: If no UUID was specified for the guest, a null UUID is returned.
++# Notes: If no UUID was specified for the guest, a null UUID is
++#     returned.
 +##
 +{ 'struct': 'UuidInfo', 'data': {'UUID': 'str'} }
 diff --git a/qapi/machine.json b/qapi/machine.json
-index 47f3facdb2..46760978ae 100644
+index 1d69bffaa0..731d8d2f60 100644
 --- a/qapi/machine.json
 +++ b/qapi/machine.json
 @@ -4,6 +4,8 @@
@@ -1959,7 +1967,7 @@ index 47f3facdb2..46760978ae 100644
  ##
  # = Machines
  ##
-@@ -228,19 +230,6 @@
+@@ -237,20 +239,6 @@
  ##
  { 'command': 'query-target', 'returns': 'TargetInfo' }
  
@@ -1972,7 +1980,8 @@ index 47f3facdb2..46760978ae 100644
 -#
 -# Since: 0.14
 -#
--# Notes: If no UUID was specified for the guest, a null UUID is returned.
+-# Notes: If no UUID was specified for the guest, a null UUID is
+-#     returned.
 -##
 -{ 'struct': 'UuidInfo', 'data': {'UUID': 'str'} }
 -

debian/patches/pve/0031-PVE-Backup-pbs-restore-new-command-to-restore-from-p.patch

@@ -14,10 +14,10 @@ Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
  create mode 100644 pbs-restore.c
 
 diff --git a/meson.build b/meson.build
-index 443b3238f9..32ab849ce6 100644
+index d16b97cf3c..6de51c34cb 100644
 --- a/meson.build
 +++ b/meson.build
-@@ -3656,6 +3656,10 @@ if have_tools
+@@ -4029,6 +4029,10 @@ if have_tools
    vma = executable('vma', files('vma.c', 'vma-reader.c') + genh,
                     dependencies: [authz, block, crypto, io, qom], install: true)
  
@@ -26,8 +26,8 @@ index 443b3238f9..32ab849ce6 100644
 +                    libproxmox_backup_qemu], install: true)
 +
    subdir('storage-daemon')
-   subdir('contrib/rdmacm-mux')
-   subdir('contrib/elf2dmp')
+ 
+   foreach exe: [ 'qemu-img', 'qemu-io', 'qemu-nbd', 'qemu-storage-daemon']
 diff --git a/pbs-restore.c b/pbs-restore.c
 new file mode 100644
 index 0000000000..f03d9bab8d

debian/patches/pve/0032-PVE-Add-PBS-block-driver-to-map-backup-archives-into.patch

@@ -14,35 +14,33 @@ Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
      getlength is now a coroutine function]
 Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
 ---
- block/meson.build    |   3 +
- block/pbs.c          | 305 +++++++++++++++++++++++++++++++++++++++++++
- configure            |   9 ++
+ block/meson.build    |   2 +
+ block/pbs.c          | 307 +++++++++++++++++++++++++++++++++++++++++++
  meson.build          |   2 +-
- qapi/block-core.json |  13 ++
+ qapi/block-core.json |  29 ++++
  qapi/pragma.json     |   1 +
- 6 files changed, 332 insertions(+), 1 deletion(-)
+ 5 files changed, 340 insertions(+), 1 deletion(-)
  create mode 100644 block/pbs.c
 
 diff --git a/block/meson.build b/block/meson.build
-index 5bcebb934b..eece0d5743 100644
+index 6bba803f94..1945e04eeb 100644
 --- a/block/meson.build
 +++ b/block/meson.build
-@@ -54,6 +54,9 @@ block_ss.add(files(
+@@ -49,6 +49,8 @@ block_ss.add(files(
    '../pve-backup.c',
  ), libproxmox_backup_qemu)
  
-+block_ss.add(when: 'CONFIG_PBS_BDRV', if_true: files('pbs.c'))
-+block_ss.add(when: 'CONFIG_PBS_BDRV', if_true: libproxmox_backup_qemu)
++block_ss.add(files('pbs.c'), libproxmox_backup_qemu)
 +
  
- softmmu_ss.add(when: 'CONFIG_TCG', if_true: files('blkreplay.c'))
- softmmu_ss.add(files('block-ram-registrar.c'))
+ system_ss.add(when: 'CONFIG_TCG', if_true: files('blkreplay.c'))
+ system_ss.add(files('block-ram-registrar.c'))
 diff --git a/block/pbs.c b/block/pbs.c
 new file mode 100644
-index 0000000000..a2211e0f3b
+index 0000000000..dd72356bd3
 --- /dev/null
 +++ b/block/pbs.c
-@@ -0,0 +1,305 @@
+@@ -0,0 +1,307 @@
 +/*
 + * Proxmox Backup Server read-only block driver
 + */
@@ -234,7 +232,8 @@ index 0000000000..a2211e0f3b
 +    proxmox_restore_disconnect(s->conn);
 +}
 +
-+static coroutine_fn int64_t pbs_co_getlength(BlockDriverState *bs)
++static coroutine_fn int64_t GRAPH_RDLOCK
++pbs_co_getlength(BlockDriverState *bs)
 +{
 +    BDRVPBSState *s = bs->opaque;
 +    return s->length;
@@ -251,9 +250,9 @@ index 0000000000..a2211e0f3b
 +    aio_co_schedule(rcb->ctx, rcb->co);
 +}
 +
-+static coroutine_fn int pbs_co_preadv(BlockDriverState *bs,
-+                                      int64_t offset, int64_t bytes,
-+                                      QEMUIOVector *qiov, BdrvRequestFlags flags)
++static coroutine_fn int GRAPH_RDLOCK
++pbs_co_preadv(BlockDriverState *bs, int64_t offset, int64_t bytes,
++              QEMUIOVector *qiov, BdrvRequestFlags flags)
 +{
 +    BDRVPBSState *s = bs->opaque;
 +    int ret;
@@ -298,16 +297,17 @@ index 0000000000..a2211e0f3b
 +    return 0;
 +}
 +
-+static coroutine_fn int pbs_co_pwritev(BlockDriverState *bs,
-+                                       int64_t offset, int64_t bytes,
-+                                       QEMUIOVector *qiov, BdrvRequestFlags flags)
++static coroutine_fn int GRAPH_RDLOCK
++pbs_co_pwritev(BlockDriverState *bs, int64_t offset, int64_t bytes,
++               QEMUIOVector *qiov, BdrvRequestFlags flags)
 +{
 +    fprintf(stderr, "pbs-bdrv: cannot write to backup file, make sure "
 +           "any attached disk devices are set to read-only!\n");
 +    return -EPERM;
 +}
 +
-+static void pbs_refresh_filename(BlockDriverState *bs)
++static void GRAPH_RDLOCK
++pbs_refresh_filename(BlockDriverState *bs)
 +{
 +    BDRVPBSState *s = bs->opaque;
 +    if (s->namespace) {
@@ -348,52 +348,11 @@ index 0000000000..a2211e0f3b
 +}
 +
 +block_init(bdrv_pbs_init);
-diff --git a/configure b/configure
-index a62a3e6be9..1ac0feb46b 100755
---- a/configure
-+++ b/configure
-@@ -288,6 +288,7 @@ linux_user=""
- bsd_user=""
- pie=""
- coroutine=""
-+pbs_bdrv="yes"
- plugins="$default_feature"
- meson=""
- ninja=""
-@@ -873,6 +874,10 @@ for opt do
-   ;;
-   --with-coroutine=*) coroutine="$optarg"
-   ;;
-+  --disable-pbs-bdrv) pbs_bdrv="no"
-+  ;;
-+  --enable-pbs-bdrv) pbs_bdrv="yes"
-+  ;;
-   --with-git=*) git="$optarg"
-   ;;
-   --with-git-submodules=*)
-@@ -1049,6 +1054,7 @@ cat << EOF
-   debug-info      debugging information
-   safe-stack      SafeStack Stack Smash Protection. Depends on
-                   clang/llvm and requires coroutine backend ucontext.
-+  pbs-bdrv        Proxmox backup server read-only block driver support
- 
- NOTE: The object files are built at the place where configure is launched
- EOF
-@@ -2386,6 +2392,9 @@ echo "TARGET_DIRS=$target_list" >> $config_host_mak
- if test "$modules" = "yes"; then
-   echo "CONFIG_MODULES=y" >> $config_host_mak
- fi
-+if test "$pbs_bdrv" = "yes" ; then
-+  echo "CONFIG_PBS_BDRV=y" >> $config_host_mak
-+fi
- 
- # XXX: suppress that
- if [ "$bsd" = "yes" ] ; then
 diff --git a/meson.build b/meson.build
-index 32ab849ce6..69afe3441b 100644
+index 6de51c34cb..3bc039f60f 100644
 --- a/meson.build
 +++ b/meson.build
-@@ -4041,7 +4041,7 @@ summary_info += {'bzip2 support':     libbzip2}
+@@ -4477,7 +4477,7 @@ summary_info += {'bzip2 support':     libbzip2}
  summary_info += {'lzfse support':     liblzfse}
  summary_info += {'zstd support':      zstd}
  summary_info += {'NUMA host support': numa}
@@ -403,10 +362,10 @@ index 32ab849ce6..69afe3441b 100644
  summary_info += {'libdaxctl support': libdaxctl}
  summary_info += {'libudev':           libudev}
 diff --git a/qapi/block-core.json b/qapi/block-core.json
-index 4ec70acf95..47118bf83e 100644
+index e49c7b5bc9..fc32ff9957 100644
 --- a/qapi/block-core.json
 +++ b/qapi/block-core.json
-@@ -3301,6 +3301,7 @@
+@@ -3457,6 +3457,7 @@
              'parallels', 'preallocate', 'qcow', 'qcow2', 'qed', 'quorum',
              'raw', 'rbd',
              { 'name': 'replication', 'if': 'CONFIG_REPLICATION' },
@@ -414,7 +373,7 @@ index 4ec70acf95..47118bf83e 100644
              'ssh', 'throttle', 'vdi', 'vhdx',
              { 'name': 'virtio-blk-vfio-pci', 'if': 'CONFIG_BLKIO' },
              { 'name': 'virtio-blk-vhost-user', 'if': 'CONFIG_BLKIO' },
-@@ -3377,6 +3378,17 @@
+@@ -3543,6 +3544,33 @@
  { 'struct': 'BlockdevOptionsNull',
    'data': { '*size': 'int', '*latency-ns': 'uint64', '*read-zeroes': 'bool' } }
  
@@ -423,6 +382,22 @@ index 4ec70acf95..47118bf83e 100644
 +#
 +# Driver specific block device options for the PBS backend.
 +#
++# @repository: Proxmox Backup Server repository.
++#
++# @snapshot: backup snapshots ID.
++#
++# @archive: archive name.
++#
++# @keyfile: keyfile to use for encryption.
++#
++# @password: password to use for connection.
++#
++# @fingerprint: backup server fingerprint.
++#
++# @key_password: password to unlock key.
++#
++# @namespace: namespace where backup snapshot lives.
++#
 +##
 +{ 'struct': 'BlockdevOptionsPbs',
 +  'data': { 'repository': 'str', 'snapshot': 'str', 'archive': 'str',
@@ -432,7 +407,7 @@ index 4ec70acf95..47118bf83e 100644
  ##
  # @BlockdevOptionsNVMe:
  #
-@@ -4750,6 +4762,7 @@
+@@ -4977,6 +5005,7 @@
        'nfs':        'BlockdevOptionsNfs',
        'null-aio':   'BlockdevOptionsNull',
        'null-co':    'BlockdevOptionsNull',
@@ -441,10 +416,10 @@ index 4ec70acf95..47118bf83e 100644
        'nvme-io_uring': { 'type': 'BlockdevOptionsNvmeIoUring',
                           'if': 'CONFIG_BLKIO' },
 diff --git a/qapi/pragma.json b/qapi/pragma.json
-index 325e684411..b6079f6a0e 100644
+index be8fa304c5..7ff46bd128 100644
 --- a/qapi/pragma.json
 +++ b/qapi/pragma.json
-@@ -45,6 +45,7 @@
+@@ -100,6 +100,7 @@
          'BlockInfo',                # query-block
          'BlockdevAioOptions',       # blockdev-add, -blockdev
          'BlockdevDriver',           # blockdev-add, query-blockstats, ...

debian/patches/pve/0033-PVE-redirect-stderr-to-journal-when-daemonized.patch

@@ -9,15 +9,15 @@ fitting.
 Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
 Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
 ---
- meson.build | 2 ++
+ meson.build | 3 ++-
  os-posix.c  | 7 +++++--
- 2 files changed, 7 insertions(+), 2 deletions(-)
+ 2 files changed, 7 insertions(+), 3 deletions(-)
 
 diff --git a/meson.build b/meson.build
-index 69afe3441b..b2e9b2aec7 100644
+index 3bc039f60f..067e8956a7 100644
 --- a/meson.build
 +++ b/meson.build
-@@ -1528,6 +1528,7 @@ keyutils = dependency('libkeyutils', required: false,
+@@ -1923,6 +1923,7 @@ endif
  has_gettid = cc.has_function('gettid')
  
  libuuid = cc.find_library('uuid', required: true)
@@ -25,28 +25,29 @@ index 69afe3441b..b2e9b2aec7 100644
  libproxmox_backup_qemu = cc.find_library('proxmox_backup_qemu', required: true)
  
  # libselinux
-@@ -3144,6 +3145,7 @@ if have_block
-   # os-posix.c contains POSIX-specific functions used by qemu-storage-daemon,
-   # os-win32.c does not
-   blockdev_ss.add(when: 'CONFIG_POSIX', if_true: files('os-posix.c'))
-+  blockdev_ss.add(when: 'CONFIG_POSIX', if_true: libsystemd)
-   softmmu_ss.add(when: 'CONFIG_WIN32', if_true: [files('os-win32.c')])
+@@ -3530,7 +3531,7 @@ if have_block
+   if host_os == 'windows'
+     system_ss.add(files('os-win32.c'))
+   else
+-    blockdev_ss.add(files('os-posix.c'))
++    blockdev_ss.add(files('os-posix.c'), libsystemd)
+   endif
  endif
  
 diff --git a/os-posix.c b/os-posix.c
-index 90ea71725f..33745a8c22 100644
+index a4284e2c07..197a2120fd 100644
 --- a/os-posix.c
 +++ b/os-posix.c
-@@ -28,6 +28,8 @@
+@@ -29,6 +29,8 @@
  #include <pwd.h>
  #include <grp.h>
  #include <libgen.h>
 +#include <systemd/sd-journal.h>
 +#include <syslog.h>
  
- /* Needed early for CONFIG_BSD etc. */
- #include "net/slirp.h"
-@@ -301,9 +303,10 @@ void os_setup_post(void)
+ #include "qemu/error-report.h"
+ #include "qemu/log.h"
+@@ -302,9 +304,10 @@ void os_setup_post(void)
  
          dup2(fd, 0);
          dup2(fd, 1);

debian/patches/pve/0034-PVE-Migrate-dirty-bitmap-state-via-savevm.patch

@@ -26,10 +26,10 @@ Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
  create mode 100644 migration/pbs-state.c
 
 diff --git a/include/migration/misc.h b/include/migration/misc.h
-index 8b49841016..78f63ca400 100644
+index c9e200f4eb..12c99ebc69 100644
 --- a/include/migration/misc.h
 +++ b/include/migration/misc.h
-@@ -77,4 +77,7 @@ bool migration_in_bg_snapshot(void);
+@@ -117,4 +117,7 @@ bool migration_in_bg_snapshot(void);
  /* migration/block-dirty-bitmap.c */
  void dirty_bitmap_mig_init(void);
  
@@ -38,32 +38,31 @@ index 8b49841016..78f63ca400 100644
 +
  #endif
 diff --git a/migration/meson.build b/migration/meson.build
-index a7824b5266..de6a271b58 100644
+index 800f12a60d..35a4306183 100644
 --- a/migration/meson.build
 +++ b/migration/meson.build
-@@ -6,8 +6,10 @@ migration_files = files(
+@@ -7,7 +7,9 @@ migration_files = files(
    'vmstate.c',
    'qemu-file.c',
    'yank_functions.c',
 +  'pbs-state.c',
  )
- softmmu_ss.add(migration_files)
-+softmmu_ss.add(libproxmox_backup_qemu)
++system_ss.add(libproxmox_backup_qemu)
  
- softmmu_ss.add(files(
+ system_ss.add(files(
    'block-dirty-bitmap.c',
 diff --git a/migration/migration.c b/migration/migration.c
-index 99f86bd6c2..db229e72c9 100644
+index 86bf76e925..b8d7e471a4 100644
 --- a/migration/migration.c
 +++ b/migration/migration.c
-@@ -245,6 +245,7 @@ void migration_object_init(void)
+@@ -239,6 +239,7 @@ void migration_object_init(void)
      blk_mig_init();
      ram_mig_init();
      dirty_bitmap_mig_init();
 +    pbs_state_mig_init();
  }
  
- void migration_cancel(const Error *error)
+ typedef struct {
 diff --git a/migration/pbs-state.c b/migration/pbs-state.c
 new file mode 100644
 index 0000000000..887e998b9e
@@ -175,10 +174,10 @@ index 0000000000..887e998b9e
 +                         NULL);
 +}
 diff --git a/pve-backup.c b/pve-backup.c
-index dd72ee0ed6..cb5312fff3 100644
+index 9c13a92623..9d480a8eec 100644
 --- a/pve-backup.c
 +++ b/pve-backup.c
-@@ -1090,6 +1090,7 @@ ProxmoxSupportStatus *qmp_query_proxmox_support(Error **errp)
+@@ -1091,6 +1091,7 @@ ProxmoxSupportStatus *qmp_query_proxmox_support(Error **errp)
      ret->pbs_library_version = g_strdup(proxmox_backup_qemu_version());
      ret->pbs_dirty_bitmap = true;
      ret->pbs_dirty_bitmap_savevm = true;
@@ -187,10 +186,10 @@ index dd72ee0ed6..cb5312fff3 100644
      ret->pbs_masterkey = true;
      ret->backup_max_workers = true;
 diff --git a/qapi/block-core.json b/qapi/block-core.json
-index 47118bf83e..809f3c61bc 100644
+index fc32ff9957..f516d8e95a 100644
 --- a/qapi/block-core.json
 +++ b/qapi/block-core.json
-@@ -984,6 +984,11 @@
+@@ -1004,6 +1004,11 @@
  # @pbs-dirty-bitmap-savevm: True if 'dirty-bitmaps' migration capability can
  #                           safely be set for savevm-async.
  #
@@ -202,7 +201,7 @@ index 47118bf83e..809f3c61bc 100644
  # @pbs-masterkey: True if the QMP backup call supports the 'master_keyfile'
  #                 parameter.
  #
-@@ -994,6 +999,7 @@
+@@ -1017,6 +1022,7 @@
    'data': { 'pbs-dirty-bitmap': 'bool',
              'query-bitmap-info': 'bool',
              'pbs-dirty-bitmap-savevm': 'bool',

debian/patches/pve/0035-migration-block-dirty-bitmap-migrate-other-bitmaps-e.patch

@@ -19,10 +19,10 @@ Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
  1 file changed, 1 insertion(+), 1 deletion(-)
 
 diff --git a/migration/block-dirty-bitmap.c b/migration/block-dirty-bitmap.c
-index fe73aa94b1..a6440929fa 100644
+index 2708abf3d7..fb17c01308 100644
 --- a/migration/block-dirty-bitmap.c
 +++ b/migration/block-dirty-bitmap.c
-@@ -539,7 +539,7 @@ static int add_bitmaps_to_list(DBMSaveState *s, BlockDriverState *bs,
+@@ -540,7 +540,7 @@ static int add_bitmaps_to_list(DBMSaveState *s, BlockDriverState *bs,
  
          if (bdrv_dirty_bitmap_check(bitmap, BDRV_BITMAP_DEFAULT, &local_err)) {
              error_report_err(local_err);

debian/patches/pve/0036-PVE-fall-back-to-open-iscsi-initiatorname.patch

@@ -21,7 +21,7 @@ Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
  1 file changed, 30 insertions(+)
 
 diff --git a/block/iscsi.c b/block/iscsi.c
-index 9fc0bed90b..1d40933165 100644
+index 2ff14b7472..46f275fbf7 100644
 --- a/block/iscsi.c
 +++ b/block/iscsi.c
 @@ -1392,12 +1392,42 @@ static char *get_initiator_name(QemuOpts *opts)

debian/patches/pve/0037-PVE-block-stream-increase-chunk-size.patch

@@ -11,7 +11,7 @@ Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
  1 file changed, 1 insertion(+), 1 deletion(-)
 
 diff --git a/block/stream.c b/block/stream.c
-index 7f9e1ecdbb..6a29d80398 100644
+index 7031eef12b..d2da83ae7c 100644
 --- a/block/stream.c
 +++ b/block/stream.c
 @@ -27,7 +27,7 @@ enum {

debian/patches/pve/0038-block-add-alloc-track-driver.patch

@@ -19,27 +19,33 @@ well.
 This only worked if the target supports backing images, so up until now
 only for qcow2, with alloc-track any driver for the target can be used.
 
-If 'auto-remove' is set, alloc-track will automatically detach itself
-once the backing image is removed. It will be replaced by 'file'.
+Replacing the node cannot be done in the
+track_co_change_backing_file() callback, because replacing a node
+cannot happen in a coroutine and requires the block graph lock
+exclusively. Could either become a special option for the stream job,
+or maybe the upcoming blockdev-replace QMP command can be used in the
+future.
 
 Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
 Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
 [FE: adapt to changed function signatures
      make error return value consistent with QEMU
-     avoid premature break during read]
+     avoid premature break during read
+     adhere to block graph lock requirements]
 Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
 ---
- block/alloc-track.c | 352 ++++++++++++++++++++++++++++++++++++++++++++
+ block/alloc-track.c | 366 ++++++++++++++++++++++++++++++++++++++++++++
  block/meson.build   |   1 +
- 2 files changed, 353 insertions(+)
+ block/stream.c      |  34 ++++
+ 3 files changed, 401 insertions(+)
  create mode 100644 block/alloc-track.c
 
 diff --git a/block/alloc-track.c b/block/alloc-track.c
 new file mode 100644
-index 0000000000..b75d7c6460
+index 0000000000..b9f8ea9137
 --- /dev/null
 +++ b/block/alloc-track.c
-@@ -0,0 +1,352 @@
+@@ -0,0 +1,366 @@
 +/*
 + * Node to allow backing images to be applied to any node. Assumes a blank
 + * image to begin with, only new writes are tracked as allocated, thus this
@@ -56,9 +62,11 @@ index 0000000000..b75d7c6460
 +#include "qapi/error.h"
 +#include "block/block_int.h"
 +#include "block/dirty-bitmap.h"
++#include "block/graph-lock.h"
 +#include "qapi/qmp/qdict.h"
 +#include "qapi/qmp/qstring.h"
 +#include "qemu/cutils.h"
++#include "qemu/error-report.h"
 +#include "qemu/option.h"
 +#include "qemu/module.h"
 +#include "sysemu/block-backend.h"
@@ -67,12 +75,12 @@ index 0000000000..b75d7c6460
 +
 +typedef enum DropState {
 +    DropNone,
-+    DropRequested,
 +    DropInProgress,
 +} DropState;
 +
 +typedef struct {
 +    BdrvDirtyBitmap *bitmap;
++    uint64_t granularity;
 +    DropState drop_state;
 +    bool auto_remove;
 +} BDRVAllocTrackState;
@@ -91,26 +99,29 @@ index 0000000000..b75d7c6460
 +    },
 +};
 +
-+static void track_refresh_limits(BlockDriverState *bs, Error **errp)
++static void GRAPH_RDLOCK
++track_refresh_limits(BlockDriverState *bs, Error **errp)
 +{
-+    BlockDriverInfo bdi;
++    BDRVAllocTrackState *s = bs->opaque;
 +
 +    if (!bs->file) {
 +        return;
 +    }
 +
-+    /* always use alignment from underlying write device so RMW cycle for
-+     * bdrv_pwritev reads data from our backing via track_co_preadv (no partial
-+     * cluster allocation in 'file') */
-+    bdrv_get_info(bs->file->bs, &bdi);
++    /*
++     * Always use alignment from underlying write device so RMW cycle for
++     * bdrv_pwritev reads data from our backing via track_co_preadv. Also use at
++     * least the bitmap granularity.
++     */
 +    bs->bl.request_alignment = MAX(bs->file->bs->bl.request_alignment,
-+                                   MAX(bdi.cluster_size, BDRV_SECTOR_SIZE));
++                                   s->granularity);
 +}
 +
 +static int track_open(BlockDriverState *bs, QDict *options, int flags,
 +                      Error **errp)
 +{
 +    BDRVAllocTrackState *s = bs->opaque;
++    BdrvChild *file = NULL;
 +    QemuOpts *opts;
 +    Error *local_err = NULL;
 +    int ret = 0;
@@ -126,18 +137,45 @@ index 0000000000..b75d7c6460
 +    s->auto_remove = qemu_opt_get_bool(opts, TRACK_OPT_AUTO_REMOVE, false);
 +
 +    /* open the target (write) node, backing will be attached by block layer */
-+    bs->file = bdrv_open_child(NULL, options, "file", bs, &child_of_bds,
-+                               BDRV_CHILD_DATA | BDRV_CHILD_METADATA, false,
-+                               &local_err);
++    file = bdrv_open_child(NULL, options, "file", bs, &child_of_bds,
++                           BDRV_CHILD_DATA | BDRV_CHILD_METADATA, false,
++                           &local_err);
++    bdrv_graph_wrlock();
++    bs->file = file;
++    bdrv_graph_wrunlock();
 +    if (local_err) {
 +        ret = -EINVAL;
 +        error_propagate(errp, local_err);
 +        goto fail;
 +    }
 +
++    bdrv_graph_rdlock_main_loop();
++    BlockDriverInfo bdi = {0};
++    ret = bdrv_get_info(bs->file->bs, &bdi);
++    if (ret < 0) {
++        /*
++         * Not a hard failure. Worst that can happen is partial cluster
++         * allocation in the write target. However, the driver here returns its
++         * allocation status based on the dirty bitmap, so any other data that
++         * maps to such a cluster will still be copied later by a stream job (or
++         * during writes to that cluster).
++         */
++        warn_report("alloc-track: unable to query cluster size for write target: %s",
++                    strerror(ret));
++    }
++    ret = 0;
++    /*
++     * Always consider alignment from underlying write device so RMW cycle for
++     * bdrv_pwritev reads data from our backing via track_co_preadv. Also try to
++     * avoid partial cluster allocation in the write target by considering the
++     * cluster size.
++     */
++    s->granularity = MAX(bs->file->bs->bl.request_alignment,
++                         MAX(bdi.cluster_size, BDRV_SECTOR_SIZE));
 +    track_refresh_limits(bs, errp);
-+    uint64_t gran = bs->bl.request_alignment;
-+    s->bitmap = bdrv_create_dirty_bitmap(bs->file->bs, gran, NULL, &local_err);
++    s->bitmap = bdrv_create_dirty_bitmap(bs->file->bs, s->granularity, NULL,
++                                         &local_err);
++    bdrv_graph_rdunlock_main_loop();
 +    if (local_err) {
 +        ret = -EIO;
 +        error_propagate(errp, local_err);
@@ -148,7 +186,9 @@ index 0000000000..b75d7c6460
 +
 +fail:
 +    if (ret < 0) {
++        bdrv_graph_wrlock();
 +        bdrv_unref_child(bs, bs->file);
++        bdrv_graph_wrunlock();
 +        if (s->bitmap) {
 +            bdrv_release_dirty_bitmap(s->bitmap);
 +        }
@@ -165,13 +205,15 @@ index 0000000000..b75d7c6460
 +    }
 +}
 +
-+static coroutine_fn int64_t track_co_getlength(BlockDriverState *bs)
++static coroutine_fn int64_t GRAPH_RDLOCK
++track_co_getlength(BlockDriverState *bs)
 +{
 +    return bdrv_co_getlength(bs->file->bs);
 +}
 +
-+static int coroutine_fn track_co_preadv(BlockDriverState *bs,
-+    int64_t offset, int64_t bytes, QEMUIOVector *qiov, BdrvRequestFlags flags)
++static int coroutine_fn GRAPH_RDLOCK
++track_co_preadv(BlockDriverState *bs, int64_t offset, int64_t bytes,
++                QEMUIOVector *qiov, BdrvRequestFlags flags)
 +{
 +    BDRVAllocTrackState *s = bs->opaque;
 +    QEMUIOVector local_qiov;
@@ -229,36 +271,39 @@ index 0000000000..b75d7c6460
 +    return ret;
 +}
 +
-+static int coroutine_fn track_co_pwritev(BlockDriverState *bs,
-+    int64_t offset, int64_t bytes, QEMUIOVector *qiov, BdrvRequestFlags flags)
++static int coroutine_fn GRAPH_RDLOCK
++track_co_pwritev(BlockDriverState *bs, int64_t offset, int64_t bytes,
++                 QEMUIOVector *qiov, BdrvRequestFlags flags)
 +{
 +    return bdrv_co_pwritev(bs->file, offset, bytes, qiov, flags);
 +}
 +
-+static int coroutine_fn track_co_pwrite_zeroes(BlockDriverState *bs,
-+    int64_t offset, int64_t bytes, BdrvRequestFlags flags)
++static int coroutine_fn GRAPH_RDLOCK
++track_co_pwrite_zeroes(BlockDriverState *bs, int64_t offset, int64_t bytes,
++                       BdrvRequestFlags flags)
 +{
 +    return bdrv_co_pwrite_zeroes(bs->file, offset, bytes, flags);
 +}
 +
-+static int coroutine_fn track_co_pdiscard(BlockDriverState *bs,
-+    int64_t offset, int64_t bytes)
++static int coroutine_fn GRAPH_RDLOCK
++track_co_pdiscard(BlockDriverState *bs, int64_t offset, int64_t bytes)
 +{
 +    return bdrv_co_pdiscard(bs->file, offset, bytes);
 +}
 +
-+static coroutine_fn int track_co_flush(BlockDriverState *bs)
++static coroutine_fn int GRAPH_RDLOCK
++track_co_flush(BlockDriverState *bs)
 +{
 +    return bdrv_co_flush(bs->file->bs);
 +}
 +
-+static int coroutine_fn track_co_block_status(BlockDriverState *bs,
-+                                              bool want_zero,
-+                                              int64_t offset,
-+                                              int64_t bytes,
-+                                              int64_t *pnum,
-+                                              int64_t *map,
-+                                              BlockDriverState **file)
++static int coroutine_fn GRAPH_RDLOCK
++track_co_block_status(BlockDriverState *bs, bool want_zero,
++                                            int64_t offset,
++                                            int64_t bytes,
++                                            int64_t *pnum,
++                                            int64_t *map,
++                                            BlockDriverState **file)
 +{
 +    BDRVAllocTrackState *s = bs->opaque;
 +
@@ -284,10 +329,10 @@ index 0000000000..b75d7c6460
 +    return 0;
 +}
 +
-+static void track_child_perm(BlockDriverState *bs, BdrvChild *c,
-+                             BdrvChildRole role, BlockReopenQueue *reopen_queue,
-+                             uint64_t perm, uint64_t shared,
-+                             uint64_t *nperm, uint64_t *nshared)
++static void GRAPH_RDLOCK
++track_child_perm(BlockDriverState *bs, BdrvChild *c, BdrvChildRole role,
++                 BlockReopenQueue *reopen_queue, uint64_t perm, uint64_t shared,
++                 uint64_t *nperm, uint64_t *nshared)
 +{
 +    BDRVAllocTrackState *s = bs->opaque;
 +
@@ -310,53 +355,28 @@ index 0000000000..b75d7c6460
 +    }
 +}
 +
-+static void track_drop(void *opaque)
++static int coroutine_fn GRAPH_RDLOCK
++track_co_change_backing_file(BlockDriverState *bs, const char *backing_file,
++                             const char *backing_fmt)
 +{
-+    BlockDriverState *bs = (BlockDriverState*)opaque;
-+    BlockDriverState *file = bs->file->bs;
-+    BDRVAllocTrackState *s = bs->opaque;
-+
-+    assert(file);
-+
-+    /* we rely on the fact that we're not used anywhere else, so let's wait
-+     * until we're only used once - in the drive connected to the guest (and one
-+     * ref is held by bdrv_ref in track_change_backing_file) */
-+    if (bs->refcnt > 2) {
-+        aio_bh_schedule_oneshot(qemu_get_aio_context(), track_drop, opaque);
-+        return;
-+    }
-+    AioContext *aio_context = bdrv_get_aio_context(bs);
-+    aio_context_acquire(aio_context);
-+
-+    bdrv_drained_begin(bs);
-+
-+    /* now that we're drained, we can safely set 'DropInProgress' */
-+    s->drop_state = DropInProgress;
-+    bdrv_child_refresh_perms(bs, bs->file, &error_abort);
-+
-+    bdrv_replace_node(bs, file, &error_abort);
-+    bdrv_set_backing_hd(bs, NULL, &error_abort);
-+    bdrv_drained_end(bs);
-+    bdrv_unref(bs);
-+    aio_context_release(aio_context);
-+}
-+
-+static int track_change_backing_file(BlockDriverState *bs,
-+                                     const char *backing_file,
-+                                     const char *backing_fmt)
-+{
-+    BDRVAllocTrackState *s = bs->opaque;
-+    if (s->auto_remove && s->drop_state == DropNone &&
-+        backing_file == NULL && backing_fmt == NULL)
-+    {
-+        /* backing file has been disconnected, there's no longer any use for
-+         * this node, so let's remove ourselves from the block graph - we need
-+         * to schedule this for later however, since when this function is
-+         * called, the blockjob modifying us is probably not done yet and has a
-+         * blocker on 'bs' */
-+        s->drop_state = DropRequested;
-+        bdrv_ref(bs);
-+        aio_bh_schedule_oneshot(qemu_get_aio_context(), track_drop, (void*)bs);
++    /*
++     * Note that the actual backing file graph change is already done in the
++     * stream job itself with bdrv_set_backing_hd_drained(), so no need to
++     * actually do anything here. But still needs to be implemented, to make
++     * our caller (i.e. bdrv_co_change_backing_file() do the right thing).
++     *
++     * FIXME
++     * We'd like to auto-remove ourselves from the block graph, but it cannot
++     * be done from a coroutine. Currently done in the stream job, where it
++     * kinda fits better, but in the long-term, a special parameter would be
++     * nice (or done via qemu-server via upcoming blockdev-replace QMP command).
++     */
++    if (backing_file == NULL) {
++        BDRVAllocTrackState *s = bs->opaque;
++        bdrv_drained_begin(bs);
++        s->drop_state = DropInProgress;
++        bdrv_child_refresh_perms(bs, bs->file, &error_abort);
++        bdrv_drained_end(bs);
 +    }
 +
 +    return 0;
@@ -383,7 +403,7 @@ index 0000000000..b75d7c6460
 +    .supports_backing                 = true,
 +
 +    .bdrv_co_block_status             = track_co_block_status,
-+    .bdrv_change_backing_file         = track_change_backing_file,
++    .bdrv_co_change_backing_file      = track_co_change_backing_file,
 +};
 +
 +static void bdrv_alloc_track_init(void)
@@ -393,7 +413,7 @@ index 0000000000..b75d7c6460
 +
 +block_init(bdrv_alloc_track_init);
 diff --git a/block/meson.build b/block/meson.build
-index eece0d5743..8a68162cc0 100644
+index 1945e04eeb..2873f3a25a 100644
 --- a/block/meson.build
 +++ b/block/meson.build
 @@ -2,6 +2,7 @@ block_ss.add(genh)
@@ -404,3 +424,48 @@ index eece0d5743..8a68162cc0 100644
    'amend.c',
    'backup.c',
    'backup-dump.c',
+diff --git a/block/stream.c b/block/stream.c
+index d2da83ae7c..f941cba14e 100644
+--- a/block/stream.c
++++ b/block/stream.c
+@@ -120,6 +120,40 @@ static int stream_prepare(Job *job)
+             ret = -EPERM;
+             goto out;
+         }
++
++        /*
++         * This cannot be done in the co_change_backing_file callback, because
++         * bdrv_replace_node() cannot be done in a coroutine. The latter also
++         * requires the graph lock exclusively. Only required for the
++         * alloc-track driver.
++         *
++         * The long-term plan is to either have an explicit parameter for the
++         * stream job or use the upcoming blockdev-replace QMP command.
++         */
++        if (base_id == NULL && strcmp(unfiltered_bs->drv->format_name, "alloc-track") == 0) {
++            BlockDriverState *file_bs;
++
++            bdrv_graph_rdlock_main_loop();
++            file_bs = unfiltered_bs->file->bs;
++            bdrv_graph_rdunlock_main_loop();
++
++            bdrv_ref(unfiltered_bs); // unrefed by bdrv_replace_node()
++            bdrv_drained_begin(file_bs);
++            bdrv_graph_wrlock();
++
++            bdrv_replace_node(unfiltered_bs, file_bs, &local_err);
++
++            bdrv_graph_wrunlock();
++            bdrv_drained_end(file_bs);
++            bdrv_unref(unfiltered_bs);
++
++            if (local_err) {
++                error_prepend(&local_err, "failed to replace alloc-track node: ");
++                error_report_err(local_err);
++                ret = -EPERM;
++                goto out;
++            }
++        }
+     }
+ 
+ out:

debian/patches/pve/0038-block-io-accept-NULL-qiov-in-bdrv_pad_request.patch

@@ -1,33 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Stefan Reiter <s.reiter@proxmox.com>
-Date: Tue, 2 Mar 2021 16:11:54 +0100
-Subject: [PATCH] block/io: accept NULL qiov in bdrv_pad_request
-
-Some operations, e.g. block-stream, perform reads while discarding the
-results (only copy-on-read matters). In this case they will pass NULL as
-the target QEMUIOVector, which will however trip bdrv_pad_request, since
-it wants to extend its passed vector.
-
-Simply check for NULL and do nothing, there's no reason to pad the
-target if it will be discarded anyway.
-
-Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
----
- block/io.c | 4 ++++
- 1 file changed, 4 insertions(+)
-
-diff --git a/block/io.c b/block/io.c
-index 2e267a85ab..449a44bf20 100644
---- a/block/io.c
-+++ b/block/io.c
-@@ -1576,6 +1576,10 @@ static int bdrv_pad_request(BlockDriverState *bs,
- {
-     int ret;
- 
-+    if (!qiov) {
-+        return 0;
-+    }
-+
-     bdrv_check_qiov_request(*offset, *bytes, *qiov, *qiov_offset, &error_abort);
- 
-     if (!bdrv_init_padding(bs, *offset, *bytes, pad)) {

debian/patches/pve/0039-Revert-block-rbd-workaround-for-ceph-issue-53784.patch

@@ -7,15 +7,16 @@ This reverts commit fc176116cdea816ceb8dd969080b2b95f58edbc0 in
 preparation to revert 0347a8fd4c3faaedf119be04c197804be40a384b.
 
 Signed-off-by: Fabian Ebner <f.ebner@proxmox.com>
+Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
 ---
  block/rbd.c | 42 ++----------------------------------------
  1 file changed, 2 insertions(+), 40 deletions(-)
 
 diff --git a/block/rbd.c b/block/rbd.c
-index a4749f3b1b..53e0396b51 100644
+index 63f60d41be..367db42dce 100644
 --- a/block/rbd.c
 +++ b/block/rbd.c
-@@ -1511,7 +1511,6 @@ static int coroutine_fn qemu_rbd_co_block_status(BlockDriverState *bs,
+@@ -1515,7 +1515,6 @@ static int coroutine_fn qemu_rbd_co_block_status(BlockDriverState *bs,
      int status, r;
      RBDDiffIterateReq req = { .offs = offset };
      uint64_t features, flags;
@@ -23,7 +24,7 @@ index a4749f3b1b..53e0396b51 100644
  
      assert(offset + bytes <= s->image_size);
  
-@@ -1539,43 +1538,7 @@ static int coroutine_fn qemu_rbd_co_block_status(BlockDriverState *bs,
+@@ -1543,43 +1542,7 @@ static int coroutine_fn qemu_rbd_co_block_status(BlockDriverState *bs,
          return status;
      }
  
@@ -68,7 +69,7 @@ index a4749f3b1b..53e0396b51 100644
                            qemu_rbd_diff_iterate_cb, &req);
      if (r < 0 && r != QEMU_RBD_EXIT_DIFF_ITERATE2) {
          return status;
-@@ -1594,8 +1557,7 @@ static int coroutine_fn qemu_rbd_co_block_status(BlockDriverState *bs,
+@@ -1598,8 +1561,7 @@ static int coroutine_fn qemu_rbd_co_block_status(BlockDriverState *bs,
          status = BDRV_BLOCK_ZERO | BDRV_BLOCK_OFFSET_VALID;
      }
  

debian/patches/pve/0040-Revert-block-rbd-fix-handling-of-holes-in-.bdrv_co_b.patch

@@ -8,15 +8,16 @@ This reverts commit 9e302f64bb407a9bb097b626da97228c2654cfee in
 preparation to revert 0347a8fd4c3faaedf119be04c197804be40a384b.
 
 Signed-off-by: Fabian Ebner <f.ebner@proxmox.com>
+Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
 ---
  block/rbd.c | 10 +++++-----
  1 file changed, 5 insertions(+), 5 deletions(-)
 
 diff --git a/block/rbd.c b/block/rbd.c
-index 53e0396b51..0913a0af39 100644
+index 367db42dce..347b121626 100644
 --- a/block/rbd.c
 +++ b/block/rbd.c
-@@ -1470,11 +1470,11 @@ static int qemu_rbd_diff_iterate_cb(uint64_t offs, size_t len,
+@@ -1474,11 +1474,11 @@ static int qemu_rbd_diff_iterate_cb(uint64_t offs, size_t len,
      RBDDiffIterateReq *req = opaque;
  
      assert(req->offs + req->bytes <= offs);

debian/patches/pve/0041-Revert-block-rbd-implement-bdrv_co_block_status.patch

@@ -18,12 +18,13 @@ Upstream bug report:
 https://gitlab.com/qemu-project/qemu/-/issues/1026
 
 Signed-off-by: Fabian Ebner <f.ebner@proxmox.com>
+Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
 ---
  block/rbd.c | 112 ----------------------------------------------------
  1 file changed, 112 deletions(-)
 
 diff --git a/block/rbd.c b/block/rbd.c
-index 0913a0af39..1dab254517 100644
+index 347b121626..e61b359b97 100644
 --- a/block/rbd.c
 +++ b/block/rbd.c
 @@ -108,12 +108,6 @@ typedef struct RBDTask {
@@ -39,7 +40,7 @@ index 0913a0af39..1dab254517 100644
  static int qemu_rbd_connect(rados_t *cluster, rados_ioctx_t *io_ctx,
                              BlockdevOptionsRbd *opts, bool cache,
                              const char *keypairs, const char *secretid,
-@@ -1456,111 +1450,6 @@ static ImageInfoSpecific *qemu_rbd_get_specific_info(BlockDriverState *bs,
+@@ -1460,111 +1454,6 @@ static ImageInfoSpecific *qemu_rbd_get_specific_info(BlockDriverState *bs,
      return spec_info;
  }
  
@@ -151,7 +152,7 @@ index 0913a0af39..1dab254517 100644
  static int64_t coroutine_fn qemu_rbd_co_getlength(BlockDriverState *bs)
  {
      BDRVRBDState *s = bs->opaque;
-@@ -1796,7 +1685,6 @@ static BlockDriver bdrv_rbd = {
+@@ -1800,7 +1689,6 @@ static BlockDriver bdrv_rbd = {
  #ifdef LIBRBD_SUPPORTS_WRITE_ZEROES
      .bdrv_co_pwrite_zeroes  = qemu_rbd_co_pwrite_zeroes,
  #endif

debian/patches/pve/0042-alloc-track-error-out-when-auto-remove-is-not-set.patch

@@ -0,0 +1,43 @@
+From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
+From: Fiona Ebner <f.ebner@proxmox.com>
+Date: Tue, 26 Mar 2024 14:57:51 +0100
+Subject: [PATCH] alloc-track: error out when auto-remove is not set
+
+Since replacing the node now happens in the stream job, where the
+option cannot be read from (it's internal to the driver), it will
+always be treated as on.
+
+qemu-server will always set it, make sure to have other users notice
+the change (should they even exist). The option can be fully dropped
+in the future while adding a version guard in qemu-server.
+
+Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
+---
+ block/alloc-track.c | 7 +++++--
+ 1 file changed, 5 insertions(+), 2 deletions(-)
+
+diff --git a/block/alloc-track.c b/block/alloc-track.c
+index b9f8ea9137..f3ed2935c4 100644
+--- a/block/alloc-track.c
++++ b/block/alloc-track.c
+@@ -34,7 +34,6 @@ typedef struct {
+     BdrvDirtyBitmap *bitmap;
+     uint64_t granularity;
+     DropState drop_state;
+-    bool auto_remove;
+ } BDRVAllocTrackState;
+ 
+ static QemuOptsList runtime_opts = {
+@@ -86,7 +85,11 @@ static int track_open(BlockDriverState *bs, QDict *options, int flags,
+         goto fail;
+     }
+ 
+-    s->auto_remove = qemu_opt_get_bool(opts, TRACK_OPT_AUTO_REMOVE, false);
++    if (!qemu_opt_get_bool(opts, TRACK_OPT_AUTO_REMOVE, false)) {
++        error_setg(errp, "alloc-track: requires auto-remove option to be set to on");
++        ret = -EINVAL;
++        goto fail;
++    }
+ 
+     /* open the target (write) node, backing will be attached by block layer */
+     file = bdrv_open_child(NULL, options, "file", bs, &child_of_bds,

debian/patches/pve/0043-alloc-track-avoid-seemingly-superfluous-child-permis.patch

@@ -0,0 +1,84 @@
+From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
+From: Fiona Ebner <f.ebner@proxmox.com>
+Date: Wed, 27 Mar 2024 11:15:39 +0100
+Subject: [PATCH] alloc-track: avoid seemingly superfluous child permission
+ update
+
+Doesn't seem necessary nowadays (maybe after commit "alloc-track: fix
+deadlock during drop" where the dropping is not rescheduled and delayed
+anymore or some upstream change). Should there really be some issue,
+instead of having a drop state, this could also be just based off the
+fact whether there is still a backing child.
+
+Dumping the cumulative (shared) permissions for the BDS with a debug
+print yields the same values after this patch and with QEMU 8.1,
+namely 3 and 5.
+
+Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
+---
+ block/alloc-track.c | 26 --------------------------
+ 1 file changed, 26 deletions(-)
+
+diff --git a/block/alloc-track.c b/block/alloc-track.c
+index f3ed2935c4..29138dcc49 100644
+--- a/block/alloc-track.c
++++ b/block/alloc-track.c
+@@ -25,15 +25,9 @@
+ 
+ #define TRACK_OPT_AUTO_REMOVE "auto-remove"
+ 
+-typedef enum DropState {
+-    DropNone,
+-    DropInProgress,
+-} DropState;
+-
+ typedef struct {
+     BdrvDirtyBitmap *bitmap;
+     uint64_t granularity;
+-    DropState drop_state;
+ } BDRVAllocTrackState;
+ 
+ static QemuOptsList runtime_opts = {
+@@ -137,8 +131,6 @@ static int track_open(BlockDriverState *bs, QDict *options, int flags,
+         goto fail;
+     }
+ 
+-    s->drop_state = DropNone;
+-
+ fail:
+     if (ret < 0) {
+         bdrv_graph_wrlock();
+@@ -289,18 +281,8 @@ track_child_perm(BlockDriverState *bs, BdrvChild *c, BdrvChildRole role,
+                  BlockReopenQueue *reopen_queue, uint64_t perm, uint64_t shared,
+                  uint64_t *nperm, uint64_t *nshared)
+ {
+-    BDRVAllocTrackState *s = bs->opaque;
+-
+     *nshared = BLK_PERM_ALL;
+ 
+-    /* in case we're currently dropping ourselves, claim to not use any
+-     * permissions at all - which is fine, since from this point on we will
+-     * never issue a read or write anymore */
+-    if (s->drop_state == DropInProgress) {
+-        *nperm = 0;
+-        return;
+-    }
+-
+     if (role & BDRV_CHILD_DATA) {
+         *nperm = perm & DEFAULT_PERM_PASSTHROUGH;
+     } else {
+@@ -326,14 +308,6 @@ track_co_change_backing_file(BlockDriverState *bs, const char *backing_file,
+      * kinda fits better, but in the long-term, a special parameter would be
+      * nice (or done via qemu-server via upcoming blockdev-replace QMP command).
+      */
+-    if (backing_file == NULL) {
+-        BDRVAllocTrackState *s = bs->opaque;
+-        bdrv_drained_begin(bs);
+-        s->drop_state = DropInProgress;
+-        bdrv_child_refresh_perms(bs, bs->file, &error_abort);
+-        bdrv_drained_end(bs);
+-    }
+-
+     return 0;
+ }
+ 

debian/patches/pve/0043-alloc-track-fix-deadlock-during-drop.patch

@@ -1,153 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Fiona Ebner <f.ebner@proxmox.com>
-Date: Thu, 6 Apr 2023 14:59:31 +0200
-Subject: [PATCH] alloc-track: fix deadlock during drop
-
-by replacing the block node directly after changing the backing file
-instead of rescheduling it.
-
-With changes in QEMU 8.0, calling bdrv_get_info (and bdrv_unref)
-during drop can lead to a deadlock when using iothread (only triggered
-with multiple disks, except during debugging where it also triggered
-with one disk sometimes):
-1. job_unref_locked acquires the AioContext and calls job->driver->free
-2. track_drop gets scheduled
-3. bdrv_graph_wrlock is called and polls which leads to track_drop being
-   called
-4. track_drop acquires the AioContext recursively
-5. bdrv_get_info is a wrapped coroutine (since 8.0) and thus polls for
-   bdrv_co_get_info. This releases the AioContext, but only once! The
-   documentation for the AIO_WAIT_WHILE macro states that the
-   AioContext lock needs to be acquired exactly once, but there does
-   not seem to be a way for track_drop to know if it acquired the lock
-   recursively or not (without adding further hacks).
-6. Because the AioContext is still held by the main thread once, it can't
-   be acquired before entering bdrv_co_get_info in co_schedule_bh_cb
-   which happens in the iothread
-
-When doing the operation in change_backing_file, the AioContext has
-already been acquired by the caller, so the issue with the recursive
-lock goes away.
-
-The comment explaining why delaying the replace is necessary is
-> we need to schedule this for later however, since when this function
-> is called, the blockjob modifying us is probably not done yet and
-> has a blocker on 'bs'
-
-However, there is no check for blockers in bdrv_replace_node. It would
-need to be done by us, the caller, with check_to_replace_node.
-Furthermore, the mirror job also does its call to bdrv_replace_node
-while there is an active blocker (inserted by mirror itself) and they
-use a specialized version to check for blockers instead of
-check_to_replace_node there. Alloc-track could also do something
-similar to check for other blockers, but it should be fine to rely on
-Proxmox VE that no other operation with the blockdev is going on.
-
-Mirror also drains the target before replacing the node, but the
-target can have other users. In case of alloc-track the file child
-should not be accessible by anybody else and so there can't be an
-in-flight operation for the file child when alloc-track is drained.
-
-The rescheduling based on refcounting is a hack and it doesn't seem to
-be necessary anymore. It's not clear what the original issue from the
-comment was. Testing with older builds with track_drop done directly
-without rescheduling also didn't lead to any noticable issue for me.
-
-One issue it might have been is the one fixed by b1e1af394d
-("block/stream: Drain subtree around graph change"), where
-block-stream had a use-after-free if the base node changed at an
-inconvenient time (which alloc-track's auto-drop does).
-
-It's also not possible to just not auto-replace the alloc-track. Not
-replacing it at all leads to other operations like block resize
-hanging, and there is no good way to replace it manually via QMP
-(there is x-blockdev-change, but it is experimental and doesn't
-implement the required operation yet). Also, it's just cleaner in
-general to not leave unnecessary block nodes lying around.
-
-Suggested-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
-Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
----
- block/alloc-track.c | 54 ++++++++++++++-------------------------------
- 1 file changed, 16 insertions(+), 38 deletions(-)
-
-diff --git a/block/alloc-track.c b/block/alloc-track.c
-index b75d7c6460..76da140a68 100644
---- a/block/alloc-track.c
-+++ b/block/alloc-track.c
-@@ -25,7 +25,6 @@
- 
- typedef enum DropState {
-     DropNone,
--    DropRequested,
-     DropInProgress,
- } DropState;
- 
-@@ -268,37 +267,6 @@ static void track_child_perm(BlockDriverState *bs, BdrvChild *c,
-     }
- }
- 
--static void track_drop(void *opaque)
--{
--    BlockDriverState *bs = (BlockDriverState*)opaque;
--    BlockDriverState *file = bs->file->bs;
--    BDRVAllocTrackState *s = bs->opaque;
--
--    assert(file);
--
--    /* we rely on the fact that we're not used anywhere else, so let's wait
--     * until we're only used once - in the drive connected to the guest (and one
--     * ref is held by bdrv_ref in track_change_backing_file) */
--    if (bs->refcnt > 2) {
--        aio_bh_schedule_oneshot(qemu_get_aio_context(), track_drop, opaque);
--        return;
--    }
--    AioContext *aio_context = bdrv_get_aio_context(bs);
--    aio_context_acquire(aio_context);
--
--    bdrv_drained_begin(bs);
--
--    /* now that we're drained, we can safely set 'DropInProgress' */
--    s->drop_state = DropInProgress;
--    bdrv_child_refresh_perms(bs, bs->file, &error_abort);
--
--    bdrv_replace_node(bs, file, &error_abort);
--    bdrv_set_backing_hd(bs, NULL, &error_abort);
--    bdrv_drained_end(bs);
--    bdrv_unref(bs);
--    aio_context_release(aio_context);
--}
--
- static int track_change_backing_file(BlockDriverState *bs,
-                                      const char *backing_file,
-                                      const char *backing_fmt)
-@@ -308,13 +276,23 @@ static int track_change_backing_file(BlockDriverState *bs,
-         backing_file == NULL && backing_fmt == NULL)
-     {
-         /* backing file has been disconnected, there's no longer any use for
--         * this node, so let's remove ourselves from the block graph - we need
--         * to schedule this for later however, since when this function is
--         * called, the blockjob modifying us is probably not done yet and has a
--         * blocker on 'bs' */
--        s->drop_state = DropRequested;
-+         * this node, so let's remove ourselves from the block graph */
-+        BlockDriverState *file = bs->file->bs;
-+
-+        /* Just to be sure, because bdrv_replace_node unrefs it */
-         bdrv_ref(bs);
--        aio_bh_schedule_oneshot(qemu_get_aio_context(), track_drop, (void*)bs);
-+        bdrv_drained_begin(bs);
-+
-+        /* now that we're drained, we can safely set 'DropInProgress' */
-+        s->drop_state = DropInProgress;
-+
-+        bdrv_child_refresh_perms(bs, bs->file, &error_abort);
-+
-+        bdrv_replace_node(bs, file, &error_abort);
-+        bdrv_set_backing_hd(bs, NULL, &error_abort);
-+
-+        bdrv_drained_end(bs);
-+        bdrv_unref(bs);
-     }
- 
-     return 0;

debian/patches/pve/0044-block-copy-before-write-fix-permission.patch

@@ -0,0 +1,55 @@
+From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
+From: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
+Date: Thu, 11 Apr 2024 11:29:22 +0200
+Subject: [PATCH] block/copy-before-write: fix permission
+
+In case when source node does not have any parents, the condition still
+works as required: backup job do create the parent by
+
+  block_job_create -> block_job_add_bdrv -> bdrv_root_attach_child
+
+Still, in this case checking @perm variable doesn't work, as backup job
+creates the root blk with empty permissions (as it rely on CBW filter
+to require correct permissions and don't want to create extra
+conflicts).
+
+So, we should not check @perm.
+
+The hack may be dropped entirely when transactional insertion of
+filter (when we don't try to recalculate permissions in intermediate
+state, when filter does conflict with original parent of the source
+node) merged (old big series
+"[PATCH v5 00/45] Transactional block-graph modifying API"[1] and it's
+current in-flight part is "[PATCH v8 0/7] blockdev-replace"[2])
+
+[1] https://patchew.org/QEMU/20220330212902.590099-1-vsementsov@openvz.org/
+[2] https://patchew.org/QEMU/20231017184444.932733-1-vsementsov@yandex-team.ru/
+
+Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
+Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
+Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
+---
+ block/copy-before-write.c | 10 +++++++---
+ 1 file changed, 7 insertions(+), 3 deletions(-)
+
+diff --git a/block/copy-before-write.c b/block/copy-before-write.c
+index 026fa9840f..5a9456d426 100644
+--- a/block/copy-before-write.c
++++ b/block/copy-before-write.c
+@@ -364,9 +364,13 @@ cbw_child_perm(BlockDriverState *bs, BdrvChild *c, BdrvChildRole role,
+                            perm, shared, nperm, nshared);
+ 
+         if (!QLIST_EMPTY(&bs->parents)) {
+-            if (perm & BLK_PERM_WRITE) {
+-                *nperm = *nperm | BLK_PERM_CONSISTENT_READ;
+-            }
++            /*
++             * Note, that source child may be shared with backup job. Backup job
++             * does create own blk parent on copy-before-write node, so this
++             * works even if source node does not have any parents before backup
++             * start
++             */
++            *nperm = *nperm | BLK_PERM_CONSISTENT_READ;
+             *nshared &= ~(BLK_PERM_WRITE | BLK_PERM_RESIZE);
+         }
+     }

debian/patches/pve/0044-migration-for-snapshots-hold-the-BQL-during-setup-ca.patch

@@ -1,190 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Fiona Ebner <f.ebner@proxmox.com>
-Date: Fri, 5 May 2023 13:39:53 +0200
-Subject: [PATCH] migration: for snapshots, hold the BQL during setup callbacks
-
-In spirit, this is a partial revert of commit 9b09503752 ("migration:
-run setup callbacks out of big lock"), but only for the snapshot case.
-
-For snapshots, the bdrv_writev_vmstate() function is used during setup
-(in QIOChannelBlock backing the QEMUFile), but not holding the BQL
-while calling it could lead to an assertion failure. To understand
-how, first note the following:
-
-1. Generated coroutine wrappers for block layer functions spawn the
-coroutine and use AIO_WAIT_WHILE()/aio_poll() to wait for it.
-2. If the host OS switches threads at an inconvenient time, it can
-happen that a bottom half scheduled for the main thread's AioContext
-is executed as part of a vCPU thread's aio_poll().
-
-An example leading to the assertion failure is as follows:
-
-main thread:
-1. A snapshot-save QMP command gets issued.
-2. snapshot_save_job_bh() is scheduled.
-
-vCPU thread:
-3. aio_poll() for the main thread's AioContext is called (e.g. when
-the guest writes to a pflash device, as part of blk_pwrite which is a
-generated coroutine wrapper).
-4. snapshot_save_job_bh() is executed as part of aio_poll().
-3. qemu_savevm_state() is called.
-4. qemu_mutex_unlock_iothread() is called. Now
-qemu_get_current_aio_context() returns 0x0.
-5. bdrv_writev_vmstate() is executed during the usual savevm setup.
-But this function is a generated coroutine wrapper, so it uses
-AIO_WAIT_WHILE. There, the assertion
-assert(qemu_get_current_aio_context() == qemu_get_aio_context());
-will fail.
-
-To fix it, ensure that the BQL is held during setup. To avoid changing
-the behavior for migration too, introduce conditionals for the setup
-callbacks that need the BQL and only take the lock if it's not already
-held.
-
-Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
----
- include/migration/register.h   |  2 +-
- migration/block-dirty-bitmap.c | 15 ++++++++++++---
- migration/block.c              | 15 ++++++++++++---
- migration/ram.c                | 16 +++++++++++++---
- migration/savevm.c             |  2 --
- 5 files changed, 38 insertions(+), 12 deletions(-)
-
-diff --git a/include/migration/register.h b/include/migration/register.h
-index a8dfd8fefd..fa9b0b0f10 100644
---- a/include/migration/register.h
-+++ b/include/migration/register.h
-@@ -43,9 +43,9 @@ typedef struct SaveVMHandlers {
-      * by other locks.
-      */
-     int (*save_live_iterate)(QEMUFile *f, void *opaque);
-+    int (*save_setup)(QEMUFile *f, void *opaque);
- 
-     /* This runs outside the iothread lock!  */
--    int (*save_setup)(QEMUFile *f, void *opaque);
-     /* Note for save_live_pending:
-      * must_precopy:
-      * - must be migrated in precopy or in stopped state
-diff --git a/migration/block-dirty-bitmap.c b/migration/block-dirty-bitmap.c
-index a6440929fa..69fab3275c 100644
---- a/migration/block-dirty-bitmap.c
-+++ b/migration/block-dirty-bitmap.c
-@@ -1214,10 +1214,17 @@ static int dirty_bitmap_save_setup(QEMUFile *f, void *opaque)
- {
-     DBMSaveState *s = &((DBMState *)opaque)->save;
-     SaveBitmapState *dbms = NULL;
-+    bool release_lock = false;
- 
--    qemu_mutex_lock_iothread();
-+    /* For snapshots, the BQL is held during setup. */
-+    if (!qemu_mutex_iothread_locked()) {
-+        qemu_mutex_lock_iothread();
-+        release_lock = true;
-+    }
-     if (init_dirty_bitmap_migration(s) < 0) {
--        qemu_mutex_unlock_iothread();
-+        if (release_lock) {
-+            qemu_mutex_unlock_iothread();
-+        }
-         return -1;
-     }
- 
-@@ -1225,7 +1232,9 @@ static int dirty_bitmap_save_setup(QEMUFile *f, void *opaque)
-         send_bitmap_start(f, s, dbms);
-     }
-     qemu_put_bitmap_flags(f, DIRTY_BITMAP_MIG_FLAG_EOS);
--    qemu_mutex_unlock_iothread();
-+    if (release_lock) {
-+        qemu_mutex_unlock_iothread();
-+    }
-     return 0;
- }
- 
-diff --git a/migration/block.c b/migration/block.c
-index b2497bbd32..c9d55be642 100644
---- a/migration/block.c
-+++ b/migration/block.c
-@@ -716,21 +716,30 @@ static void block_migration_cleanup(void *opaque)
- static int block_save_setup(QEMUFile *f, void *opaque)
- {
-     int ret;
-+    bool release_lock = false;
- 
-     trace_migration_block_save("setup", block_mig_state.submitted,
-                                block_mig_state.transferred);
- 
--    qemu_mutex_lock_iothread();
-+    /* For snapshots, the BQL is held during setup. */
-+    if (!qemu_mutex_iothread_locked()) {
-+        qemu_mutex_lock_iothread();
-+        release_lock = true;
-+    }
-     ret = init_blk_migration(f);
-     if (ret < 0) {
--        qemu_mutex_unlock_iothread();
-+        if (release_lock) {
-+            qemu_mutex_unlock_iothread();
-+        }
-         return ret;
-     }
- 
-     /* start track dirty blocks */
-     ret = set_dirty_tracking();
- 
--    qemu_mutex_unlock_iothread();
-+    if (release_lock) {
-+        qemu_mutex_unlock_iothread();
-+    }
- 
-     if (ret) {
-         return ret;
-diff --git a/migration/ram.c b/migration/ram.c
-index 79d881f735..0ecbbc3202 100644
---- a/migration/ram.c
-+++ b/migration/ram.c
-@@ -3117,8 +3117,16 @@ static void migration_bitmap_clear_discarded_pages(RAMState *rs)
- 
- static void ram_init_bitmaps(RAMState *rs)
- {
--    /* For memory_global_dirty_log_start below.  */
--    qemu_mutex_lock_iothread();
-+    bool release_lock = false;
-+
-+    /*
-+     * For memory_global_dirty_log_start below.
-+     * For snapshots, the BQL is held during setup.
-+     */
-+    if (!qemu_mutex_iothread_locked()) {
-+        qemu_mutex_lock_iothread();
-+        release_lock = true;
-+    }
-     qemu_mutex_lock_ramlist();
- 
-     WITH_RCU_READ_LOCK_GUARD() {
-@@ -3130,7 +3138,9 @@ static void ram_init_bitmaps(RAMState *rs)
-         }
-     }
-     qemu_mutex_unlock_ramlist();
--    qemu_mutex_unlock_iothread();
-+    if (release_lock) {
-+        qemu_mutex_unlock_iothread();
-+    }
- 
-     /*
-      * After an eventual first bitmap sync, fixup the initial bitmap
-diff --git a/migration/savevm.c b/migration/savevm.c
-index aa54a67fda..fc6a82a555 100644
---- a/migration/savevm.c
-+++ b/migration/savevm.c
-@@ -1621,10 +1621,8 @@ static int qemu_savevm_state(QEMUFile *f, Error **errp)
-     memset(&compression_counters, 0, sizeof(compression_counters));
-     ms->to_dst_file = f;
- 
--    qemu_mutex_unlock_iothread();
-     qemu_savevm_state_header(f);
-     qemu_savevm_state_setup(f);
--    qemu_mutex_lock_iothread();
- 
-     while (qemu_file_get_error(f) == 0) {
-         if (qemu_savevm_state_iterate(f, false) > 0) {

debian/patches/pve/0045-block-copy-before-write-support-unligned-snapshot-di.patch

@@ -0,0 +1,48 @@
+From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
+From: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
+Date: Thu, 11 Apr 2024 11:29:23 +0200
+Subject: [PATCH] block/copy-before-write: support unligned snapshot-discard
+
+First thing that crashes on unligned access here is
+bdrv_reset_dirty_bitmap(). Correct way is to align-down the
+snapshot-discard request.
+
+Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
+Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
+Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
+---
+ block/copy-before-write.c | 16 +++++++++++++---
+ 1 file changed, 13 insertions(+), 3 deletions(-)
+
+diff --git a/block/copy-before-write.c b/block/copy-before-write.c
+index 5a9456d426..c0e70669a2 100644
+--- a/block/copy-before-write.c
++++ b/block/copy-before-write.c
+@@ -325,14 +325,24 @@ static int coroutine_fn GRAPH_RDLOCK
+ cbw_co_pdiscard_snapshot(BlockDriverState *bs, int64_t offset, int64_t bytes)
+ {
+     BDRVCopyBeforeWriteState *s = bs->opaque;
++    uint32_t cluster_size = block_copy_cluster_size(s->bcs);
++    int64_t aligned_offset = QEMU_ALIGN_UP(offset, cluster_size);
++    int64_t aligned_end = QEMU_ALIGN_DOWN(offset + bytes, cluster_size);
++    int64_t aligned_bytes;
++
++    if (aligned_end <= aligned_offset) {
++        return 0;
++    }
++    aligned_bytes = aligned_end - aligned_offset;
+ 
+     WITH_QEMU_LOCK_GUARD(&s->lock) {
+-        bdrv_reset_dirty_bitmap(s->access_bitmap, offset, bytes);
++        bdrv_reset_dirty_bitmap(s->access_bitmap, aligned_offset,
++                                aligned_bytes);
+     }
+ 
+-    block_copy_reset(s->bcs, offset, bytes);
++    block_copy_reset(s->bcs, aligned_offset, aligned_bytes);
+ 
+-    return bdrv_co_pdiscard(s->target, offset, bytes);
++    return bdrv_co_pdiscard(s->target, aligned_offset, aligned_bytes);
+ }
+ 
+ static void GRAPH_RDLOCK cbw_refresh_filename(BlockDriverState *bs)

debian/patches/pve/0045-savevm-async-don-t-hold-BQL-during-setup.patch

@@ -1,29 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Fiona Ebner <f.ebner@proxmox.com>
-Date: Fri, 5 May 2023 15:30:16 +0200
-Subject: [PATCH] savevm-async: don't hold BQL during setup
-
-See commit "migration: for snapshots, hold the BQL during setup
-callbacks" for why. This is separate, because a version of that one
-will hopefully land upstream.
-
-Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
----
- migration/savevm-async.c | 2 --
- 1 file changed, 2 deletions(-)
-
-diff --git a/migration/savevm-async.c b/migration/savevm-async.c
-index ea3b2f36a6..dd7744ab66 100644
---- a/migration/savevm-async.c
-+++ b/migration/savevm-async.c
-@@ -403,10 +403,8 @@ void qmp_savevm_start(const char *statefile, Error **errp)
-     snap_state.state = SAVE_STATE_ACTIVE;
-     snap_state.finalize_bh = qemu_bh_new(process_savevm_finalize, &snap_state);
-     snap_state.co = qemu_coroutine_create(&process_savevm_co, NULL);
--    qemu_mutex_unlock_iothread();
-     qemu_savevm_state_header(snap_state.file);
-     qemu_savevm_state_setup(snap_state.file);
--    qemu_mutex_lock_iothread();
- 
-     /* Async processing from here on out happens in iohandler context, so let
-      * the target bdrv have its home there.

debian/patches/pve/0046-block-copy-before-write-create-block_copy-bitmap-in-.patch

@@ -0,0 +1,373 @@
+From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
+From: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
+Date: Thu, 11 Apr 2024 11:29:24 +0200
+Subject: [PATCH] block/copy-before-write: create block_copy bitmap in filter
+ node
+
+Currently block_copy creates copy_bitmap in source node. But that is in
+bad relation with .independent_close=true of copy-before-write filter:
+source node may be detached and removed before .bdrv_close() handler
+called, which should call block_copy_state_free(), which in turn should
+remove copy_bitmap.
+
+That's all not ideal: it would be better if internal bitmap of
+block-copy object is not attached to any node. But that is not possible
+now.
+
+The simplest solution is just create copy_bitmap in filter node, where
+anyway two other bitmaps are created.
+
+Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
+Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
+Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
+---
+ block/block-copy.c         |   3 +-
+ block/copy-before-write.c  |   2 +-
+ include/block/block-copy.h |   1 +
+ tests/qemu-iotests/257.out | 112 ++++++++++++++++++-------------------
+ 4 files changed, 60 insertions(+), 58 deletions(-)
+
+diff --git a/block/block-copy.c b/block/block-copy.c
+index 9ee3dd7ef5..8fca2c3698 100644
+--- a/block/block-copy.c
++++ b/block/block-copy.c
+@@ -351,6 +351,7 @@ static int64_t block_copy_calculate_cluster_size(BlockDriverState *target,
+ }
+ 
+ BlockCopyState *block_copy_state_new(BdrvChild *source, BdrvChild *target,
++                                     BlockDriverState *copy_bitmap_bs,
+                                      const BdrvDirtyBitmap *bitmap,
+                                      Error **errp)
+ {
+@@ -367,7 +368,7 @@ BlockCopyState *block_copy_state_new(BdrvChild *source, BdrvChild *target,
+         return NULL;
+     }
+ 
+-    copy_bitmap = bdrv_create_dirty_bitmap(source->bs, cluster_size, NULL,
++    copy_bitmap = bdrv_create_dirty_bitmap(copy_bitmap_bs, cluster_size, NULL,
+                                            errp);
+     if (!copy_bitmap) {
+         return NULL;
+diff --git a/block/copy-before-write.c b/block/copy-before-write.c
+index c0e70669a2..94db31512d 100644
+--- a/block/copy-before-write.c
++++ b/block/copy-before-write.c
+@@ -468,7 +468,7 @@ static int cbw_open(BlockDriverState *bs, QDict *options, int flags,
+             ((BDRV_REQ_FUA | BDRV_REQ_MAY_UNMAP | BDRV_REQ_NO_FALLBACK) &
+              bs->file->bs->supported_zero_flags);
+ 
+-    s->bcs = block_copy_state_new(bs->file, s->target, bitmap, errp);
++    s->bcs = block_copy_state_new(bs->file, s->target, bs, bitmap, errp);
+     if (!s->bcs) {
+         error_prepend(errp, "Cannot create block-copy-state: ");
+         return -EINVAL;
+diff --git a/include/block/block-copy.h b/include/block/block-copy.h
+index 0700953ab8..8b41643bfa 100644
+--- a/include/block/block-copy.h
++++ b/include/block/block-copy.h
+@@ -25,6 +25,7 @@ typedef struct BlockCopyState BlockCopyState;
+ typedef struct BlockCopyCallState BlockCopyCallState;
+ 
+ BlockCopyState *block_copy_state_new(BdrvChild *source, BdrvChild *target,
++                                     BlockDriverState *copy_bitmap_bs,
+                                      const BdrvDirtyBitmap *bitmap,
+                                      Error **errp);
+ 
+diff --git a/tests/qemu-iotests/257.out b/tests/qemu-iotests/257.out
+index aa76131ca9..c33dd7f3a9 100644
+--- a/tests/qemu-iotests/257.out
++++ b/tests/qemu-iotests/257.out
+@@ -120,16 +120,16 @@ write -P0x67 0x3fe0000 0x20000
+         "granularity": 65536,
+         "persistent": false,
+         "recording": false
+-      }
+-    ],
+-    "drive0": [
++      },
+       {
+         "busy": false,
+         "count": 0,
+         "granularity": 65536,
+         "persistent": false,
+         "recording": false
+-      },
++      }
++    ],
++    "drive0": [
+       {
+         "busy": false,
+         "count": 458752,
+@@ -596,16 +596,16 @@ write -P0x67 0x3fe0000 0x20000
+         "granularity": 65536,
+         "persistent": false,
+         "recording": false
+-      }
+-    ],
+-    "drive0": [
++      },
+       {
+         "busy": false,
+         "count": 0,
+         "granularity": 65536,
+         "persistent": false,
+         "recording": false
+-      },
++      }
++    ],
++    "drive0": [
+       {
+         "busy": false,
+         "count": 458752,
+@@ -865,16 +865,16 @@ write -P0x67 0x3fe0000 0x20000
+         "granularity": 65536,
+         "persistent": false,
+         "recording": false
+-      }
+-    ],
+-    "drive0": [
++      },
+       {
+         "busy": false,
+         "count": 0,
+         "granularity": 65536,
+         "persistent": false,
+         "recording": false
+-      },
++      }
++    ],
++    "drive0": [
+       {
+         "busy": false,
+         "count": 458752,
+@@ -1341,16 +1341,16 @@ write -P0x67 0x3fe0000 0x20000
+         "granularity": 65536,
+         "persistent": false,
+         "recording": false
+-      }
+-    ],
+-    "drive0": [
++      },
+       {
+         "busy": false,
+         "count": 0,
+         "granularity": 65536,
+         "persistent": false,
+         "recording": false
+-      },
++      }
++    ],
++    "drive0": [
+       {
+         "busy": false,
+         "count": 458752,
+@@ -1610,16 +1610,16 @@ write -P0x67 0x3fe0000 0x20000
+         "granularity": 65536,
+         "persistent": false,
+         "recording": false
+-      }
+-    ],
+-    "drive0": [
++      },
+       {
+         "busy": false,
+         "count": 0,
+         "granularity": 65536,
+         "persistent": false,
+         "recording": false
+-      },
++      }
++    ],
++    "drive0": [
+       {
+         "busy": false,
+         "count": 458752,
+@@ -2086,16 +2086,16 @@ write -P0x67 0x3fe0000 0x20000
+         "granularity": 65536,
+         "persistent": false,
+         "recording": false
+-      }
+-    ],
+-    "drive0": [
++      },
+       {
+         "busy": false,
+         "count": 0,
+         "granularity": 65536,
+         "persistent": false,
+         "recording": false
+-      },
++      }
++    ],
++    "drive0": [
+       {
+         "busy": false,
+         "count": 458752,
+@@ -2355,16 +2355,16 @@ write -P0x67 0x3fe0000 0x20000
+         "granularity": 65536,
+         "persistent": false,
+         "recording": false
+-      }
+-    ],
+-    "drive0": [
++      },
+       {
+         "busy": false,
+         "count": 0,
+         "granularity": 65536,
+         "persistent": false,
+         "recording": false
+-      },
++      }
++    ],
++    "drive0": [
+       {
+         "busy": false,
+         "count": 458752,
+@@ -2831,16 +2831,16 @@ write -P0x67 0x3fe0000 0x20000
+         "granularity": 65536,
+         "persistent": false,
+         "recording": false
+-      }
+-    ],
+-    "drive0": [
++      },
+       {
+         "busy": false,
+         "count": 0,
+         "granularity": 65536,
+         "persistent": false,
+         "recording": false
+-      },
++      }
++    ],
++    "drive0": [
+       {
+         "busy": false,
+         "count": 458752,
+@@ -3100,16 +3100,16 @@ write -P0x67 0x3fe0000 0x20000
+         "granularity": 65536,
+         "persistent": false,
+         "recording": false
+-      }
+-    ],
+-    "drive0": [
++      },
+       {
+         "busy": false,
+         "count": 0,
+         "granularity": 65536,
+         "persistent": false,
+         "recording": false
+-      },
++      }
++    ],
++    "drive0": [
+       {
+         "busy": false,
+         "count": 458752,
+@@ -3576,16 +3576,16 @@ write -P0x67 0x3fe0000 0x20000
+         "granularity": 65536,
+         "persistent": false,
+         "recording": false
+-      }
+-    ],
+-    "drive0": [
++      },
+       {
+         "busy": false,
+         "count": 0,
+         "granularity": 65536,
+         "persistent": false,
+         "recording": false
+-      },
++      }
++    ],
++    "drive0": [
+       {
+         "busy": false,
+         "count": 458752,
+@@ -3845,16 +3845,16 @@ write -P0x67 0x3fe0000 0x20000
+         "granularity": 65536,
+         "persistent": false,
+         "recording": false
+-      }
+-    ],
+-    "drive0": [
++      },
+       {
+         "busy": false,
+         "count": 0,
+         "granularity": 65536,
+         "persistent": false,
+         "recording": false
+-      },
++      }
++    ],
++    "drive0": [
+       {
+         "busy": false,
+         "count": 458752,
+@@ -4321,16 +4321,16 @@ write -P0x67 0x3fe0000 0x20000
+         "granularity": 65536,
+         "persistent": false,
+         "recording": false
+-      }
+-    ],
+-    "drive0": [
++      },
+       {
+         "busy": false,
+         "count": 0,
+         "granularity": 65536,
+         "persistent": false,
+         "recording": false
+-      },
++      }
++    ],
++    "drive0": [
+       {
+         "busy": false,
+         "count": 458752,
+@@ -4590,16 +4590,16 @@ write -P0x67 0x3fe0000 0x20000
+         "granularity": 65536,
+         "persistent": false,
+         "recording": false
+-      }
+-    ],
+-    "drive0": [
++      },
+       {
+         "busy": false,
+         "count": 0,
+         "granularity": 65536,
+         "persistent": false,
+         "recording": false
+-      },
++      }
++    ],
++    "drive0": [
+       {
+         "busy": false,
+         "count": 458752,
+@@ -5066,16 +5066,16 @@ write -P0x67 0x3fe0000 0x20000
+         "granularity": 65536,
+         "persistent": false,
+         "recording": false
+-      }
+-    ],
+-    "drive0": [
++      },
+       {
+         "busy": false,
+         "count": 0,
+         "granularity": 65536,
+         "persistent": false,
+         "recording": false
+-      },
++      }
++    ],
++    "drive0": [
+       {
+         "busy": false,
+         "count": 458752,

debian/patches/pve/0047-qapi-blockdev-backup-add-discard-source-parameter.patch

@@ -0,0 +1,277 @@
+From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
+From: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
+Date: Thu, 11 Apr 2024 11:29:25 +0200
+Subject: [PATCH] qapi: blockdev-backup: add discard-source parameter
+
+Add a parameter that enables discard-after-copy. That is mostly useful
+in "push backup with fleecing" scheme, when source is snapshot-access
+format driver node, based on copy-before-write filter snapshot-access
+API:
+
+[guest]      [snapshot-access] ~~ blockdev-backup ~~> [backup target]
+   |            |
+   | root       | file
+   v            v
+[copy-before-write]
+   |             |
+   | file        | target
+   v             v
+[active disk]   [temp.img]
+
+In this case discard-after-copy does two things:
+
+ - discard data in temp.img to save disk space
+ - avoid further copy-before-write operation in discarded area
+
+Note that we have to declare WRITE permission on source in
+copy-before-write filter, for discard to work. Still we can't take it
+unconditionally, as it will break normal backup from RO source. So, we
+have to add a parameter and pass it thorough bdrv_open flags.
+
+Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
+Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
+Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
+---
+ block/backup.c                         |  5 +++--
+ block/block-copy.c                     |  9 +++++++++
+ block/copy-before-write.c              | 15 +++++++++++++--
+ block/copy-before-write.h              |  1 +
+ block/replication.c                    |  4 ++--
+ blockdev.c                             |  2 +-
+ include/block/block-common.h           |  2 ++
+ include/block/block-copy.h             |  1 +
+ include/block/block_int-global-state.h |  2 +-
+ qapi/block-core.json                   |  4 ++++
+ 10 files changed, 37 insertions(+), 8 deletions(-)
+
+diff --git a/block/backup.c b/block/backup.c
+index 16d611c4ca..1963e47ab9 100644
+--- a/block/backup.c
++++ b/block/backup.c
+@@ -332,7 +332,7 @@ BlockJob *backup_job_create(const char *job_id, BlockDriverState *bs,
+                   BlockDriverState *target, int64_t speed,
+                   MirrorSyncMode sync_mode, BdrvDirtyBitmap *sync_bitmap,
+                   BitmapSyncMode bitmap_mode,
+-                  bool compress,
++                  bool compress, bool discard_source,
+                   const char *filter_node_name,
+                   BackupPerf *perf,
+                   BlockdevOnError on_source_error,
+@@ -433,7 +433,8 @@ BlockJob *backup_job_create(const char *job_id, BlockDriverState *bs,
+         goto error;
+     }
+ 
+-    cbw = bdrv_cbw_append(bs, target, filter_node_name, &bcs, errp);
++    cbw = bdrv_cbw_append(bs, target, filter_node_name, discard_source,
++                          &bcs, errp);
+     if (!cbw) {
+         goto error;
+     }
+diff --git a/block/block-copy.c b/block/block-copy.c
+index 8fca2c3698..7e3b378528 100644
+--- a/block/block-copy.c
++++ b/block/block-copy.c
+@@ -137,6 +137,7 @@ typedef struct BlockCopyState {
+     CoMutex lock;
+     int64_t in_flight_bytes;
+     BlockCopyMethod method;
++    bool discard_source;
+     BlockReqList reqs;
+     QLIST_HEAD(, BlockCopyCallState) calls;
+     /*
+@@ -353,6 +354,7 @@ static int64_t block_copy_calculate_cluster_size(BlockDriverState *target,
+ BlockCopyState *block_copy_state_new(BdrvChild *source, BdrvChild *target,
+                                      BlockDriverState *copy_bitmap_bs,
+                                      const BdrvDirtyBitmap *bitmap,
++                                     bool discard_source,
+                                      Error **errp)
+ {
+     ERRP_GUARD();
+@@ -418,6 +420,7 @@ BlockCopyState *block_copy_state_new(BdrvChild *source, BdrvChild *target,
+                                     cluster_size),
+     };
+ 
++    s->discard_source = discard_source;
+     block_copy_set_copy_opts(s, false, false);
+ 
+     ratelimit_init(&s->rate_limit);
+@@ -589,6 +592,12 @@ static coroutine_fn int block_copy_task_entry(AioTask *task)
+     co_put_to_shres(s->mem, t->req.bytes);
+     block_copy_task_end(t, ret);
+ 
++    if (s->discard_source && ret == 0) {
++        int64_t nbytes =
++            MIN(t->req.offset + t->req.bytes, s->len) - t->req.offset;
++        bdrv_co_pdiscard(s->source, t->req.offset, nbytes);
++    }
++
+     return ret;
+ }
+ 
+diff --git a/block/copy-before-write.c b/block/copy-before-write.c
+index 94db31512d..853e01a1eb 100644
+--- a/block/copy-before-write.c
++++ b/block/copy-before-write.c
+@@ -44,6 +44,7 @@ typedef struct BDRVCopyBeforeWriteState {
+     BdrvChild *target;
+     OnCbwError on_cbw_error;
+     uint64_t cbw_timeout_ns;
++    bool discard_source;
+ 
+     /*
+      * @lock: protects access to @access_bitmap, @done_bitmap and
+@@ -357,6 +358,8 @@ cbw_child_perm(BlockDriverState *bs, BdrvChild *c, BdrvChildRole role,
+                uint64_t perm, uint64_t shared,
+                uint64_t *nperm, uint64_t *nshared)
+ {
++    BDRVCopyBeforeWriteState *s = bs->opaque;
++
+     if (!(role & BDRV_CHILD_FILTERED)) {
+         /*
+          * Target child
+@@ -381,6 +384,10 @@ cbw_child_perm(BlockDriverState *bs, BdrvChild *c, BdrvChildRole role,
+              * start
+              */
+             *nperm = *nperm | BLK_PERM_CONSISTENT_READ;
++            if (s->discard_source) {
++                *nperm = *nperm | BLK_PERM_WRITE;
++            }
++
+             *nshared &= ~(BLK_PERM_WRITE | BLK_PERM_RESIZE);
+         }
+     }
+@@ -468,7 +475,9 @@ static int cbw_open(BlockDriverState *bs, QDict *options, int flags,
+             ((BDRV_REQ_FUA | BDRV_REQ_MAY_UNMAP | BDRV_REQ_NO_FALLBACK) &
+              bs->file->bs->supported_zero_flags);
+ 
+-    s->bcs = block_copy_state_new(bs->file, s->target, bs, bitmap, errp);
++    s->discard_source = flags & BDRV_O_CBW_DISCARD_SOURCE;
++    s->bcs = block_copy_state_new(bs->file, s->target, bs, bitmap,
++                                  flags & BDRV_O_CBW_DISCARD_SOURCE, errp);
+     if (!s->bcs) {
+         error_prepend(errp, "Cannot create block-copy-state: ");
+         return -EINVAL;
+@@ -535,12 +544,14 @@ static BlockDriver bdrv_cbw_filter = {
+ BlockDriverState *bdrv_cbw_append(BlockDriverState *source,
+                                   BlockDriverState *target,
+                                   const char *filter_node_name,
++                                  bool discard_source,
+                                   BlockCopyState **bcs,
+                                   Error **errp)
+ {
+     BDRVCopyBeforeWriteState *state;
+     BlockDriverState *top;
+     QDict *opts;
++    int flags = BDRV_O_RDWR | (discard_source ? BDRV_O_CBW_DISCARD_SOURCE : 0);
+ 
+     assert(source->total_sectors == target->total_sectors);
+     GLOBAL_STATE_CODE();
+@@ -553,7 +564,7 @@ BlockDriverState *bdrv_cbw_append(BlockDriverState *source,
+     qdict_put_str(opts, "file", bdrv_get_node_name(source));
+     qdict_put_str(opts, "target", bdrv_get_node_name(target));
+ 
+-    top = bdrv_insert_node(source, opts, BDRV_O_RDWR, errp);
++    top = bdrv_insert_node(source, opts, flags, errp);
+     if (!top) {
+         return NULL;
+     }
+diff --git a/block/copy-before-write.h b/block/copy-before-write.h
+index 6e72bb25e9..01af0cd3c4 100644
+--- a/block/copy-before-write.h
++++ b/block/copy-before-write.h
+@@ -39,6 +39,7 @@
+ BlockDriverState *bdrv_cbw_append(BlockDriverState *source,
+                                   BlockDriverState *target,
+                                   const char *filter_node_name,
++                                  bool discard_source,
+                                   BlockCopyState **bcs,
+                                   Error **errp);
+ void bdrv_cbw_drop(BlockDriverState *bs);
+diff --git a/block/replication.c b/block/replication.c
+index ca6bd0a720..0415a5e8b7 100644
+--- a/block/replication.c
++++ b/block/replication.c
+@@ -582,8 +582,8 @@ static void replication_start(ReplicationState *rs, ReplicationMode mode,
+ 
+         s->backup_job = backup_job_create(
+                                 NULL, s->secondary_disk->bs, s->hidden_disk->bs,
+-                                0, MIRROR_SYNC_MODE_NONE, NULL, 0, false, NULL,
+-                                &perf,
++                                0, MIRROR_SYNC_MODE_NONE, NULL, 0, false, false,
++                                NULL, &perf,
+                                 BLOCKDEV_ON_ERROR_REPORT,
+                                 BLOCKDEV_ON_ERROR_REPORT, JOB_INTERNAL,
+                                 backup_job_completed, bs, NULL, &local_err);
+diff --git a/blockdev.c b/blockdev.c
+index 5e5dbc1da9..1054a69279 100644
+--- a/blockdev.c
++++ b/blockdev.c
+@@ -2727,7 +2727,7 @@ static BlockJob *do_backup_common(BackupCommon *backup,
+ 
+     job = backup_job_create(backup->job_id, bs, target_bs, backup->speed,
+                             backup->sync, bmap, backup->bitmap_mode,
+-                            backup->compress,
++                            backup->compress, backup->discard_source,
+                             backup->filter_node_name,
+                             &perf,
+                             backup->on_source_error,
+diff --git a/include/block/block-common.h b/include/block/block-common.h
+index a846023a09..338fe5ff7a 100644
+--- a/include/block/block-common.h
++++ b/include/block/block-common.h
+@@ -243,6 +243,8 @@ typedef enum {
+                                       read-write fails */
+ #define BDRV_O_IO_URING    0x40000 /* use io_uring instead of the thread pool */
+ 
++#define BDRV_O_CBW_DISCARD_SOURCE 0x80000 /* for copy-before-write filter */
++
+ #define BDRV_O_CACHE_MASK  (BDRV_O_NOCACHE | BDRV_O_NO_FLUSH)
+ 
+ 
+diff --git a/include/block/block-copy.h b/include/block/block-copy.h
+index 8b41643bfa..bdc703bacd 100644
+--- a/include/block/block-copy.h
++++ b/include/block/block-copy.h
+@@ -27,6 +27,7 @@ typedef struct BlockCopyCallState BlockCopyCallState;
+ BlockCopyState *block_copy_state_new(BdrvChild *source, BdrvChild *target,
+                                      BlockDriverState *copy_bitmap_bs,
+                                      const BdrvDirtyBitmap *bitmap,
++                                     bool discard_source,
+                                      Error **errp);
+ 
+ /* Function should be called prior any actual copy request */
+diff --git a/include/block/block_int-global-state.h b/include/block/block_int-global-state.h
+index cc1387ae02..f0c642b194 100644
+--- a/include/block/block_int-global-state.h
++++ b/include/block/block_int-global-state.h
+@@ -195,7 +195,7 @@ BlockJob *backup_job_create(const char *job_id, BlockDriverState *bs,
+                             MirrorSyncMode sync_mode,
+                             BdrvDirtyBitmap *sync_bitmap,
+                             BitmapSyncMode bitmap_mode,
+-                            bool compress,
++                            bool compress, bool discard_source,
+                             const char *filter_node_name,
+                             BackupPerf *perf,
+                             BlockdevOnError on_source_error,
+diff --git a/qapi/block-core.json b/qapi/block-core.json
+index f516d8e95a..d796d49abb 100644
+--- a/qapi/block-core.json
++++ b/qapi/block-core.json
+@@ -1849,6 +1849,9 @@
+ #     node specified by @drive.  If this option is not given, a node
+ #     name is autogenerated.  (Since: 4.2)
+ #
++# @discard-source: Discard blocks on source which are already copied
++#     to the target.  (Since 9.0)
++#
+ # @x-perf: Performance options.  (Since 6.0)
+ #
+ # Features:
+@@ -1870,6 +1873,7 @@
+             '*on-target-error': 'BlockdevOnError',
+             '*auto-finalize': 'bool', '*auto-dismiss': 'bool',
+             '*filter-node-name': 'str',
++            '*discard-source': 'bool',
+             '*x-perf': { 'type': 'BackupPerf',
+                          'features': [ 'unstable' ] } } }
+ 

debian/patches/pve/0048-copy-before-write-allow-specifying-minimum-cluster-s.patch

@@ -0,0 +1,133 @@
+From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
+From: Fiona Ebner <f.ebner@proxmox.com>
+Date: Thu, 11 Apr 2024 11:29:26 +0200
+Subject: [PATCH] copy-before-write: allow specifying minimum cluster size
+
+Useful to make discard-source work in the context of backup fleecing
+when the fleecing image has a larger granularity than the backup
+target.
+
+Copy-before-write operations will use at least this granularity and in
+particular, discard requests to the source node will too. If the
+granularity is too small, they will just be aligned down in
+cbw_co_pdiscard_snapshot() and thus effectively ignored.
+
+The QAPI uses uint32 so the value will be non-negative, but still fit
+into a uint64_t.
+
+Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
+Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
+---
+ block/block-copy.c         | 17 +++++++++++++----
+ block/copy-before-write.c  |  3 ++-
+ include/block/block-copy.h |  1 +
+ qapi/block-core.json       |  8 +++++++-
+ 4 files changed, 23 insertions(+), 6 deletions(-)
+
+diff --git a/block/block-copy.c b/block/block-copy.c
+index 7e3b378528..adb1cbb440 100644
+--- a/block/block-copy.c
++++ b/block/block-copy.c
+@@ -310,6 +310,7 @@ void block_copy_set_copy_opts(BlockCopyState *s, bool use_copy_range,
+ }
+ 
+ static int64_t block_copy_calculate_cluster_size(BlockDriverState *target,
++                                                 int64_t min_cluster_size,
+                                                  Error **errp)
+ {
+     int ret;
+@@ -335,7 +336,7 @@ static int64_t block_copy_calculate_cluster_size(BlockDriverState *target,
+                     "used. If the actual block size of the target exceeds "
+                     "this default, the backup may be unusable",
+                     BLOCK_COPY_CLUSTER_SIZE_DEFAULT);
+-        return BLOCK_COPY_CLUSTER_SIZE_DEFAULT;
++        return MAX(min_cluster_size, BLOCK_COPY_CLUSTER_SIZE_DEFAULT);
+     } else if (ret < 0 && !target_does_cow) {
+         error_setg_errno(errp, -ret,
+             "Couldn't determine the cluster size of the target image, "
+@@ -345,16 +346,18 @@ static int64_t block_copy_calculate_cluster_size(BlockDriverState *target,
+         return ret;
+     } else if (ret < 0 && target_does_cow) {
+         /* Not fatal; just trudge on ahead. */
+-        return BLOCK_COPY_CLUSTER_SIZE_DEFAULT;
++        return MAX(min_cluster_size, BLOCK_COPY_CLUSTER_SIZE_DEFAULT);
+     }
+ 
+-    return MAX(BLOCK_COPY_CLUSTER_SIZE_DEFAULT, bdi.cluster_size);
++    return MAX(min_cluster_size,
++               MAX(BLOCK_COPY_CLUSTER_SIZE_DEFAULT, bdi.cluster_size));
+ }
+ 
+ BlockCopyState *block_copy_state_new(BdrvChild *source, BdrvChild *target,
+                                      BlockDriverState *copy_bitmap_bs,
+                                      const BdrvDirtyBitmap *bitmap,
+                                      bool discard_source,
++                                     int64_t min_cluster_size,
+                                      Error **errp)
+ {
+     ERRP_GUARD();
+@@ -365,7 +368,13 @@ BlockCopyState *block_copy_state_new(BdrvChild *source, BdrvChild *target,
+ 
+     GLOBAL_STATE_CODE();
+ 
+-    cluster_size = block_copy_calculate_cluster_size(target->bs, errp);
++    if (min_cluster_size && !is_power_of_2(min_cluster_size)) {
++        error_setg(errp, "min-cluster-size needs to be a power of 2");
++        return NULL;
++    }
++
++    cluster_size = block_copy_calculate_cluster_size(target->bs,
++                                                     min_cluster_size, errp);
+     if (cluster_size < 0) {
+         return NULL;
+     }
+diff --git a/block/copy-before-write.c b/block/copy-before-write.c
+index 853e01a1eb..47b3cdd09f 100644
+--- a/block/copy-before-write.c
++++ b/block/copy-before-write.c
+@@ -477,7 +477,8 @@ static int cbw_open(BlockDriverState *bs, QDict *options, int flags,
+ 
+     s->discard_source = flags & BDRV_O_CBW_DISCARD_SOURCE;
+     s->bcs = block_copy_state_new(bs->file, s->target, bs, bitmap,
+-                                  flags & BDRV_O_CBW_DISCARD_SOURCE, errp);
++                                  flags & BDRV_O_CBW_DISCARD_SOURCE,
++                                  opts->min_cluster_size, errp);
+     if (!s->bcs) {
+         error_prepend(errp, "Cannot create block-copy-state: ");
+         return -EINVAL;
+diff --git a/include/block/block-copy.h b/include/block/block-copy.h
+index bdc703bacd..77857c6c68 100644
+--- a/include/block/block-copy.h
++++ b/include/block/block-copy.h
+@@ -28,6 +28,7 @@ BlockCopyState *block_copy_state_new(BdrvChild *source, BdrvChild *target,
+                                      BlockDriverState *copy_bitmap_bs,
+                                      const BdrvDirtyBitmap *bitmap,
+                                      bool discard_source,
++                                     int64_t min_cluster_size,
+                                      Error **errp);
+ 
+ /* Function should be called prior any actual copy request */
+diff --git a/qapi/block-core.json b/qapi/block-core.json
+index d796d49abb..edbf6e78b9 100644
+--- a/qapi/block-core.json
++++ b/qapi/block-core.json
+@@ -4930,12 +4930,18 @@
+ #     @on-cbw-error parameter will decide how this failure is handled.
+ #     Default 0.  (Since 7.1)
+ #
++# @min-cluster-size: Minimum size of blocks used by copy-before-write
++#     operations.  Has to be a power of 2.  No effect if smaller than
++#     the maximum of the target's cluster size and 64 KiB.  Default 0.
++#     (Since 8.1)
++#
+ # Since: 6.2
+ ##
+ { 'struct': 'BlockdevOptionsCbw',
+   'base': 'BlockdevOptionsGenericFormat',
+   'data': { 'target': 'BlockdevRef', '*bitmap': 'BlockDirtyBitmap',
+-            '*on-cbw-error': 'OnCbwError', '*cbw-timeout': 'uint32' } }
++            '*on-cbw-error': 'OnCbwError', '*cbw-timeout': 'uint32',
++            '*min-cluster-size': 'uint32' } }
+ 
+ ##
+ # @BlockdevOptions:

debian/patches/pve/0049-backup-add-minimum-cluster-size-to-performance-optio.patch

@@ -0,0 +1,106 @@
+From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
+From: Fiona Ebner <f.ebner@proxmox.com>
+Date: Thu, 11 Apr 2024 11:29:27 +0200
+Subject: [PATCH] backup: add minimum cluster size to performance options
+
+Useful to make discard-source work in the context of backup fleecing
+when the fleecing image has a larger granularity than the backup
+target.
+
+Backup/block-copy will use at least this granularity for copy operations
+and in particular, discard requests to the backup source will too. If
+the granularity is too small, they will just be aligned down in
+cbw_co_pdiscard_snapshot() and thus effectively ignored.
+
+Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
+Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
+---
+ block/backup.c            | 2 +-
+ block/copy-before-write.c | 2 ++
+ block/copy-before-write.h | 1 +
+ blockdev.c                | 3 +++
+ qapi/block-core.json      | 9 +++++++--
+ 5 files changed, 14 insertions(+), 3 deletions(-)
+
+diff --git a/block/backup.c b/block/backup.c
+index 1963e47ab9..fe69723ada 100644
+--- a/block/backup.c
++++ b/block/backup.c
+@@ -434,7 +434,7 @@ BlockJob *backup_job_create(const char *job_id, BlockDriverState *bs,
+     }
+ 
+     cbw = bdrv_cbw_append(bs, target, filter_node_name, discard_source,
+-                          &bcs, errp);
++                          perf->min_cluster_size, &bcs, errp);
+     if (!cbw) {
+         goto error;
+     }
+diff --git a/block/copy-before-write.c b/block/copy-before-write.c
+index 47b3cdd09f..bba58326d7 100644
+--- a/block/copy-before-write.c
++++ b/block/copy-before-write.c
+@@ -546,6 +546,7 @@ BlockDriverState *bdrv_cbw_append(BlockDriverState *source,
+                                   BlockDriverState *target,
+                                   const char *filter_node_name,
+                                   bool discard_source,
++                                  int64_t min_cluster_size,
+                                   BlockCopyState **bcs,
+                                   Error **errp)
+ {
+@@ -564,6 +565,7 @@ BlockDriverState *bdrv_cbw_append(BlockDriverState *source,
+     }
+     qdict_put_str(opts, "file", bdrv_get_node_name(source));
+     qdict_put_str(opts, "target", bdrv_get_node_name(target));
++    qdict_put_int(opts, "min-cluster-size", min_cluster_size);
+ 
+     top = bdrv_insert_node(source, opts, flags, errp);
+     if (!top) {
+diff --git a/block/copy-before-write.h b/block/copy-before-write.h
+index 01af0cd3c4..dc6cafe7fa 100644
+--- a/block/copy-before-write.h
++++ b/block/copy-before-write.h
+@@ -40,6 +40,7 @@ BlockDriverState *bdrv_cbw_append(BlockDriverState *source,
+                                   BlockDriverState *target,
+                                   const char *filter_node_name,
+                                   bool discard_source,
++                                  int64_t min_cluster_size,
+                                   BlockCopyState **bcs,
+                                   Error **errp);
+ void bdrv_cbw_drop(BlockDriverState *bs);
+diff --git a/blockdev.c b/blockdev.c
+index 1054a69279..cbe224387b 100644
+--- a/blockdev.c
++++ b/blockdev.c
+@@ -2654,6 +2654,9 @@ static BlockJob *do_backup_common(BackupCommon *backup,
+         if (backup->x_perf->has_max_chunk) {
+             perf.max_chunk = backup->x_perf->max_chunk;
+         }
++        if (backup->x_perf->has_min_cluster_size) {
++            perf.min_cluster_size = backup->x_perf->min_cluster_size;
++        }
+     }
+ 
+     if ((backup->sync == MIRROR_SYNC_MODE_BITMAP) ||
+diff --git a/qapi/block-core.json b/qapi/block-core.json
+index edbf6e78b9..6e7ee87633 100644
+--- a/qapi/block-core.json
++++ b/qapi/block-core.json
+@@ -1790,11 +1790,16 @@
+ #     it should not be less than job cluster size which is calculated
+ #     as maximum of target image cluster size and 64k.  Default 0.
+ #
++# @min-cluster-size: Minimum size of blocks used by copy-before-write
++#     and background copy operations.  Has to be a power of 2.  No
++#     effect if smaller than the maximum of the target's cluster size
++#     and 64 KiB.  Default 0. (Since 8.1)
++#
+ # Since: 6.0
+ ##
+ { 'struct': 'BackupPerf',
+-  'data': { '*use-copy-range': 'bool',
+-            '*max-workers': 'int', '*max-chunk': 'int64' } }
++  'data': { '*use-copy-range': 'bool', '*max-workers': 'int',
++            '*max-chunk': 'int64', '*min-cluster-size': 'uint32' } }
+ 
+ ##
+ # @BackupCommon:

debian/patches/pve/0050-PVE-backup-add-fleecing-option.patch

@@ -0,0 +1,345 @@
+From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
+From: Fiona Ebner <f.ebner@proxmox.com>
+Date: Thu, 11 Apr 2024 11:29:28 +0200
+Subject: [PATCH] PVE backup: add fleecing option
+
+When a fleecing option is given, it is expected that each device has
+a corresponding "-fleecing" block device already attached, except for
+EFI disk and TPM state, where fleecing is never used.
+
+The following graph was adapted from [0] which also contains more
+details about fleecing.
+
+[guest]
+   |
+   | root
+   v                 file
+[copy-before-write]<------[snapshot-access]
+   |           |
+   | file      | target
+   v           v
+[source] [fleecing]
+
+For fleecing, a copy-before-write filter is inserted on top of the
+source node, as well as a snapshot-access node pointing to the filter
+node which allows to read the consistent state of the image at the
+time it was inserted. New guest writes are passed through the
+copy-before-write filter which will first copy over old data to the
+fleecing image in case that old data is still needed by the
+snapshot-access node.
+
+The backup process will sequentially read from the snapshot access,
+which has a bitmap and knows whether to read from the original image
+or the fleecing image to get the "snapshot" state, i.e. data from the
+source image at the time when the copy-before-write filter was
+inserted. After reading, the copied sections are discarded from the
+fleecing image to reduce space usage.
+
+All of this can be restricted by an initial dirty bitmap to parts of
+the source image that are required for an incremental backup.
+
+For discard to work, it is necessary that the fleecing image does not
+have a larger cluster size than the backup job granularity. Since
+querying that size does not always work, e.g. for RBD with krbd, the
+cluster size will not be reported, a minimum of 4 MiB is used. A job
+with PBS target already has at least this granularity, so it's just
+relevant for other targets. I.e. edge cases where this minimum is not
+enough should be very rare in practice. If ever necessary in the
+future, can still add a passed-in value for the backup QMP command to
+override.
+
+Additionally, the cbw-timeout and on-cbw-error=break-snapshot options
+are set when installing the copy-before-write filter and
+snapshot-access. When an error or timeout occurs, the problematic (and
+each further) snapshot operation will fail and thus cancel the backup
+instead of breaking the guest write.
+
+Note that job_id cannot be inferred from the snapshot-access bs because
+it has no parent, so just pass the one from the original bs.
+
+[0]: https://www.mail-archive.com/qemu-devel@nongnu.org/msg876056.html
+
+Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
+Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
+---
+ block/monitor/block-hmp-cmds.c |   1 +
+ pve-backup.c                   | 143 ++++++++++++++++++++++++++++++++-
+ qapi/block-core.json           |  10 ++-
+ 3 files changed, 150 insertions(+), 4 deletions(-)
+
+diff --git a/block/monitor/block-hmp-cmds.c b/block/monitor/block-hmp-cmds.c
+index 5000c084c5..70b3de4c7e 100644
+--- a/block/monitor/block-hmp-cmds.c
++++ b/block/monitor/block-hmp-cmds.c
+@@ -1043,6 +1043,7 @@ void coroutine_fn hmp_backup(Monitor *mon, const QDict *qdict)
+         NULL, NULL,
+         devlist, qdict_haskey(qdict, "speed"), speed,
+         false, 0, // BackupPerf max-workers
++        false, false, // fleecing
+         &error);
+ 
+     hmp_handle_error(mon, error);
+diff --git a/pve-backup.c b/pve-backup.c
+index 9d480a8eec..7cc1dd3724 100644
+--- a/pve-backup.c
++++ b/pve-backup.c
+@@ -7,9 +7,11 @@
+ #include "sysemu/blockdev.h"
+ #include "block/block_int-global-state.h"
+ #include "block/blockjob.h"
++#include "block/copy-before-write.h"
+ #include "block/dirty-bitmap.h"
+ #include "block/graph-lock.h"
+ #include "qapi/qapi-commands-block.h"
++#include "qapi/qmp/qdict.h"
+ #include "qapi/qmp/qerror.h"
+ #include "qemu/cutils.h"
+ 
+@@ -81,8 +83,15 @@ static void pvebackup_init(void)
+ // initialize PVEBackupState at startup
+ opts_init(pvebackup_init);
+ 
++typedef struct PVEBackupFleecingInfo {
++    BlockDriverState *bs;
++    BlockDriverState *cbw;
++    BlockDriverState *snapshot_access;
++} PVEBackupFleecingInfo;
++
+ typedef struct PVEBackupDevInfo {
+     BlockDriverState *bs;
++    PVEBackupFleecingInfo fleecing;
+     size_t size;
+     uint64_t block_size;
+     uint8_t dev_id;
+@@ -355,6 +364,25 @@ static void pvebackup_complete_cb(void *opaque, int ret)
+     PVEBackupDevInfo *di = opaque;
+     di->completed_ret = ret;
+ 
++    /*
++     * Handle block-graph specific cleanup (for fleecing) outside of the coroutine, because the work
++     * won't be done as a coroutine anyways:
++     * - For snapshot_access, allows doing bdrv_unref() directly. Doing it via bdrv_co_unref() would
++     *   just spawn a BH calling bdrv_unref().
++     * - For cbw, draining would need to spawn a BH.
++     *
++     * Note that the AioContext lock is already acquired by our caller, i.e.
++     * job_finalize_single_locked()
++     */
++    if (di->fleecing.snapshot_access) {
++        bdrv_unref(di->fleecing.snapshot_access);
++        di->fleecing.snapshot_access = NULL;
++    }
++    if (di->fleecing.cbw) {
++        bdrv_cbw_drop(di->fleecing.cbw);
++        di->fleecing.cbw = NULL;
++    }
++
+     /*
+      * Needs to happen outside of coroutine, because it takes the graph write lock.
+      */
+@@ -522,9 +550,82 @@ static void create_backup_jobs_bh(void *opaque) {
+         }
+         bdrv_drained_begin(di->bs);
+ 
++        BackupPerf perf = (BackupPerf){ .max_workers = backup_state.perf.max_workers };
++
++        BlockDriverState *source_bs = di->bs;
++        bool discard_source = false;
++        bdrv_graph_co_rdlock();
++        const char *job_id = bdrv_get_device_name(di->bs);
++        bdrv_graph_co_rdunlock();
++        if (di->fleecing.bs) {
++            QDict *cbw_opts = qdict_new();
++            qdict_put_str(cbw_opts, "driver", "copy-before-write");
++            qdict_put_str(cbw_opts, "file", bdrv_get_node_name(di->bs));
++            qdict_put_str(cbw_opts, "target", bdrv_get_node_name(di->fleecing.bs));
++
++            if (di->bitmap) {
++                /*
++                 * Only guest writes to parts relevant for the backup need to be intercepted with
++                 * old data being copied to the fleecing image.
++                 */
++                qdict_put_str(cbw_opts, "bitmap.node", bdrv_get_node_name(di->bs));
++                qdict_put_str(cbw_opts, "bitmap.name", bdrv_dirty_bitmap_name(di->bitmap));
++            }
++            /*
++             * Fleecing storage is supposed to be fast and it's better to break backup than guest
++             * writes. Certain guest drivers like VirtIO-win have 60 seconds timeout by default, so
++             * abort a bit before that.
++             */
++            qdict_put_str(cbw_opts, "on-cbw-error", "break-snapshot");
++            qdict_put_int(cbw_opts, "cbw-timeout", 45);
++
++            di->fleecing.cbw = bdrv_insert_node(di->bs, cbw_opts, BDRV_O_RDWR, &local_err);
++
++            if (!di->fleecing.cbw) {
++                error_setg(errp, "appending cbw node for fleecing failed: %s",
++                           local_err ? error_get_pretty(local_err) : "unknown error");
++                break;
++            }
++
++            QDict *snapshot_access_opts = qdict_new();
++            qdict_put_str(snapshot_access_opts, "driver", "snapshot-access");
++            qdict_put_str(snapshot_access_opts, "file", bdrv_get_node_name(di->fleecing.cbw));
++
++            /*
++             * Holding the AioContext lock here would cause a deadlock, because bdrv_open_driver()
++             * will aquire it a second time. But it's allowed to be held exactly once when polling
++             * and that happens when the bdrv_refresh_total_sectors() call is made there.
++             */
++            di->fleecing.snapshot_access =
++                bdrv_open(NULL, NULL, snapshot_access_opts, BDRV_O_RDWR | BDRV_O_UNMAP, &local_err);
++            if (!di->fleecing.snapshot_access) {
++                error_setg(errp, "setting up snapshot access for fleecing failed: %s",
++                           local_err ? error_get_pretty(local_err) : "unknown error");
++                break;
++            }
++            source_bs = di->fleecing.snapshot_access;
++            discard_source = true;
++
++            /*
++             * bdrv_get_info() just retuns 0 (= doesn't matter) for RBD when using krbd. But discard
++             * on the fleecing image won't work if the backup job's granularity is less than the RBD
++             * object size (default 4 MiB), so it does matter. Always use at least 4 MiB. With a PBS
++             * target, the backup job granularity would already be at least this much.
++             */
++            perf.min_cluster_size = 4 * 1024 * 1024;
++            /*
++             * For discard to work, cluster size for the backup job must be at least the same as for
++             * the fleecing image.
++             */
++            BlockDriverInfo bdi;
++            if (bdrv_get_info(di->fleecing.bs, &bdi) >= 0) {
++                perf.min_cluster_size = MAX(perf.min_cluster_size, bdi.cluster_size);
++            }
++        }
++
+         BlockJob *job = backup_job_create(
+-            NULL, di->bs, di->target, backup_state.speed, sync_mode, di->bitmap,
+-            bitmap_mode, false, NULL, &backup_state.perf, BLOCKDEV_ON_ERROR_REPORT,
++            job_id, source_bs, di->target, backup_state.speed, sync_mode, di->bitmap,
++            bitmap_mode, false, discard_source, NULL, &perf, BLOCKDEV_ON_ERROR_REPORT,
+             BLOCKDEV_ON_ERROR_REPORT, JOB_DEFAULT, pvebackup_complete_cb, di, backup_state.txn,
+             &local_err);
+ 
+@@ -580,6 +681,14 @@ static void create_backup_jobs_bh(void *opaque) {
+     aio_co_enter(data->ctx, data->co);
+ }
+ 
++/*
++ * EFI disk and TPM state are small and it's just not worth setting up fleecing for them.
++ */
++static bool device_uses_fleecing(const char *device_id)
++{
++    return strncmp(device_id, "drive-efidisk", 13) && strncmp(device_id, "drive-tpmstate", 14);
++}
++
+ /*
+  * Returns a list of device infos, which needs to be freed by the caller. In
+  * case of an error, errp will be set, but the returned value might still be a
+@@ -587,6 +696,7 @@ static void create_backup_jobs_bh(void *opaque) {
+  */
+ static GList coroutine_fn GRAPH_RDLOCK *get_device_info(
+     const char *devlist,
++    bool fleecing,
+     Error **errp)
+ {
+     gchar **devs = NULL;
+@@ -610,6 +720,31 @@ static GList coroutine_fn GRAPH_RDLOCK *get_device_info(
+             }
+             PVEBackupDevInfo *di = g_new0(PVEBackupDevInfo, 1);
+             di->bs = bs;
++
++            if (fleecing && device_uses_fleecing(*d)) {
++                g_autofree gchar *fleecing_devid = g_strconcat(*d, "-fleecing", NULL);
++                BlockBackend *fleecing_blk = blk_by_name(fleecing_devid);
++                if (!fleecing_blk) {
++                    error_set(errp, ERROR_CLASS_DEVICE_NOT_FOUND,
++                              "Device '%s' not found", fleecing_devid);
++                    goto err;
++                }
++                BlockDriverState *fleecing_bs = blk_bs(fleecing_blk);
++                if (!bdrv_co_is_inserted(fleecing_bs)) {
++                    error_setg(errp, QERR_DEVICE_HAS_NO_MEDIUM, fleecing_devid);
++                    goto err;
++                }
++                /*
++                 * Fleecing image needs to be the same size to act as a cbw target.
++                 */
++                if (bs->total_sectors != fleecing_bs->total_sectors) {
++                    error_setg(errp, "Size mismatch for '%s' - sector count %ld != %ld",
++                               fleecing_devid, fleecing_bs->total_sectors, bs->total_sectors);
++                    goto err;
++                }
++                di->fleecing.bs = fleecing_bs;
++            }
++
+             di_list = g_list_append(di_list, di);
+             d++;
+         }
+@@ -659,6 +794,7 @@ UuidInfo coroutine_fn *qmp_backup(
+     const char *devlist,
+     bool has_speed, int64_t speed,
+     bool has_max_workers, int64_t max_workers,
++    bool has_fleecing, bool fleecing,
+     Error **errp)
+ {
+     assert(qemu_in_coroutine());
+@@ -687,7 +823,7 @@ UuidInfo coroutine_fn *qmp_backup(
+     format = has_format ? format : BACKUP_FORMAT_VMA;
+ 
+     bdrv_graph_co_rdlock();
+-    di_list = get_device_info(devlist, &local_err);
++    di_list = get_device_info(devlist, has_fleecing && fleecing, &local_err);
+     bdrv_graph_co_rdunlock();
+     if (local_err) {
+         error_propagate(errp, local_err);
+@@ -1095,5 +1231,6 @@ ProxmoxSupportStatus *qmp_query_proxmox_support(Error **errp)
+     ret->query_bitmap_info = true;
+     ret->pbs_masterkey = true;
+     ret->backup_max_workers = true;
++    ret->backup_fleecing = true;
+     return ret;
+ }
+diff --git a/qapi/block-core.json b/qapi/block-core.json
+index 6e7ee87633..dc5f75cd39 100644
+--- a/qapi/block-core.json
++++ b/qapi/block-core.json
+@@ -948,6 +948,10 @@
+ #
+ # @max-workers: see @BackupPerf for details. Default 16.
+ #
++# @fleecing: perform a backup with fleecing. For each device in @devlist, a
++#            corresponing '-fleecing' device with the same size already needs to
++#            be present.
++#
+ # Returns: the uuid of the backup job
+ #
+ ##
+@@ -968,7 +972,8 @@
+                                     '*firewall-file': 'str',
+                                     '*devlist': 'str',
+                                     '*speed': 'int',
+-                                    '*max-workers': 'int' },
++                                    '*max-workers': 'int',
++                                    '*fleecing': 'bool' },
+   'returns': 'UuidInfo', 'coroutine': true }
+ 
+ ##
+@@ -1014,6 +1019,8 @@
+ #
+ # @pbs-library-version: Running version of libproxmox-backup-qemu0 library.
+ #
++# @backup-fleecing: Whether backup fleecing is supported or not.
++#
+ # @backup-max-workers: Whether the 'max-workers' @BackupPerf setting is
+ #     supported or not.
+ #
+@@ -1025,6 +1032,7 @@
+             'pbs-dirty-bitmap-migration': 'bool',
+             'pbs-masterkey': 'bool',
+             'pbs-library-version': 'str',
++            'backup-fleecing': 'bool',
+             'backup-max-workers': 'bool' } }
+ 
+ ##

debian/patches/pve/0051-PVE-backup-improve-error-when-copy-before-write-fail.patch

@@ -0,0 +1,117 @@
+From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
+From: Fiona Ebner <f.ebner@proxmox.com>
+Date: Mon, 29 Apr 2024 14:43:58 +0200
+Subject: [PATCH] PVE backup: improve error when copy-before-write fails for
+ fleecing
+
+With fleecing, failure for copy-before-write does not fail the guest
+write, but only sets the snapshot error that is associated to the
+copy-before-write filter, making further requests to the snapshot
+access fail with EACCES, which then also fails the job. But that error
+code is not the root cause of why the backup failed, so bubble up the
+original snapshot error instead.
+
+Reported-by: Friedrich Weber <f.weber@proxmox.com>
+Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
+Tested-by: Friedrich Weber <f.weber@proxmox.com>
+---
+ block/copy-before-write.c | 18 ++++++++++++------
+ block/copy-before-write.h |  1 +
+ pve-backup.c              |  9 +++++++++
+ 3 files changed, 22 insertions(+), 6 deletions(-)
+
+diff --git a/block/copy-before-write.c b/block/copy-before-write.c
+index bba58326d7..50cc4c7aae 100644
+--- a/block/copy-before-write.c
++++ b/block/copy-before-write.c
+@@ -27,6 +27,7 @@
+ #include "qapi/qmp/qjson.h"
+ 
+ #include "sysemu/block-backend.h"
++#include "qemu/atomic.h"
+ #include "qemu/cutils.h"
+ #include "qapi/error.h"
+ #include "block/block_int.h"
+@@ -74,7 +75,8 @@ typedef struct BDRVCopyBeforeWriteState {
+      * @snapshot_error is normally zero. But on first copy-before-write failure
+      * when @on_cbw_error == ON_CBW_ERROR_BREAK_SNAPSHOT, @snapshot_error takes
+      * value of this error (<0). After that all in-flight and further
+-     * snapshot-API requests will fail with that error.
++     * snapshot-API requests will fail with that error. To be accessed with
++     * atomics.
+      */
+     int snapshot_error;
+ } BDRVCopyBeforeWriteState;
+@@ -114,7 +116,7 @@ static coroutine_fn int cbw_do_copy_before_write(BlockDriverState *bs,
+         return 0;
+     }
+ 
+-    if (s->snapshot_error) {
++    if (qatomic_read(&s->snapshot_error)) {
+         return 0;
+     }
+ 
+@@ -138,9 +140,7 @@ static coroutine_fn int cbw_do_copy_before_write(BlockDriverState *bs,
+     WITH_QEMU_LOCK_GUARD(&s->lock) {
+         if (ret < 0) {
+             assert(s->on_cbw_error == ON_CBW_ERROR_BREAK_SNAPSHOT);
+-            if (!s->snapshot_error) {
+-                s->snapshot_error = ret;
+-            }
++            qatomic_cmpxchg(&s->snapshot_error, 0, ret);
+         } else {
+             bdrv_set_dirty_bitmap(s->done_bitmap, off, end - off);
+         }
+@@ -214,7 +214,7 @@ cbw_snapshot_read_lock(BlockDriverState *bs, int64_t offset, int64_t bytes,
+ 
+     QEMU_LOCK_GUARD(&s->lock);
+ 
+-    if (s->snapshot_error) {
++    if (qatomic_read(&s->snapshot_error)) {
+         g_free(req);
+         return NULL;
+     }
+@@ -585,6 +585,12 @@ void bdrv_cbw_drop(BlockDriverState *bs)
+     bdrv_unref(bs);
+ }
+ 
++int bdrv_cbw_snapshot_error(BlockDriverState *bs)
++{
++    BDRVCopyBeforeWriteState *s = bs->opaque;
++    return qatomic_read(&s->snapshot_error);
++}
++
+ static void cbw_init(void)
+ {
+     bdrv_register(&bdrv_cbw_filter);
+diff --git a/block/copy-before-write.h b/block/copy-before-write.h
+index dc6cafe7fa..a27d2d7d9f 100644
+--- a/block/copy-before-write.h
++++ b/block/copy-before-write.h
+@@ -44,5 +44,6 @@ BlockDriverState *bdrv_cbw_append(BlockDriverState *source,
+                                   BlockCopyState **bcs,
+                                   Error **errp);
+ void bdrv_cbw_drop(BlockDriverState *bs);
++int bdrv_cbw_snapshot_error(BlockDriverState *bs);
+ 
+ #endif /* COPY_BEFORE_WRITE_H */
+diff --git a/pve-backup.c b/pve-backup.c
+index 7cc1dd3724..07709aa350 100644
+--- a/pve-backup.c
++++ b/pve-backup.c
+@@ -379,6 +379,15 @@ static void pvebackup_complete_cb(void *opaque, int ret)
+         di->fleecing.snapshot_access = NULL;
+     }
+     if (di->fleecing.cbw) {
++        /*
++         * With fleecing, failure for cbw does not fail the guest write, but only sets the snapshot
++         * error, making further requests to the snapshot fail with EACCES, which then also fail the
++         * job. But that code is not the root cause and just confusing, so update it.
++         */
++        int snapshot_error = bdrv_cbw_snapshot_error(di->fleecing.cbw);
++        if (di->completed_ret == -EACCES && snapshot_error) {
++            di->completed_ret = snapshot_error;
++        }
+         bdrv_cbw_drop(di->fleecing.cbw);
+         di->fleecing.cbw = NULL;
+     }

debian/patches/series

@@ -1,12 +1,15 @@
 extra/0001-monitor-qmp-fix-race-with-clients-disconnecting-earl.patch
 extra/0002-scsi-megasas-Internal-cdbs-have-16-byte-length.patch
 extra/0003-ide-avoid-potential-deadlock-when-draining-during-tr.patch
-extra/0004-ui-return-NULL-when-getting-cursor-without-a-console.patch
-extra/0005-memory-prevent-dma-reentracy-issues.patch
-extra/0006-lsi53c895a-disable-reentrancy-detection-for-script-R.patch
-extra/0007-bcm2835_property-disable-reentrancy-detection-for-io.patch
-extra/0008-raven-disable-reentrancy-detection-for-iomem.patch
-extra/0009-apic-disable-reentrancy-detection-for-apic-msi.patch
+extra/0004-Revert-x86-acpi-workaround-Windows-not-handling-name.patch
+extra/0005-block-copy-before-write-use-uint64_t-for-timeout-in-.patch
+extra/0006-virtio-gpu-fix-v2-migration.patch
+extra/0007-hw-pflash-fix-block-write-start.patch
+extra/0008-target-i386-fix-operand-size-for-DATA16-REX.W-POPCNT.patch
+extra/0009-target-i386-rdpkru-wrpkru-are-no-prefix-instructions.patch
+extra/0010-target-i386-fix-feature-dependency-for-WAITPKG.patch
+extra/0011-Revert-virtio-pci-fix-use-of-a-released-vector.patch
+extra/0012-hw-core-machine-move-compatibility-flags-for-VirtIO-.patch
 bitmap-mirror/0001-drive-mirror-add-support-for-sync-bitmap-mode-never.patch
 bitmap-mirror/0002-drive-mirror-add-support-for-conditional-and-always-.patch
 bitmap-mirror/0003-mirror-add-check-for-bitmap-mode-without-bitmap.patch
@@ -50,11 +53,18 @@ pve/0034-PVE-Migrate-dirty-bitmap-state-via-savevm.patch
 pve/0035-migration-block-dirty-bitmap-migrate-other-bitmaps-e.patch
 pve/0036-PVE-fall-back-to-open-iscsi-initiatorname.patch
 pve/0037-PVE-block-stream-increase-chunk-size.patch
-pve/0038-block-io-accept-NULL-qiov-in-bdrv_pad_request.patch
-pve/0039-block-add-alloc-track-driver.patch
-pve/0040-Revert-block-rbd-workaround-for-ceph-issue-53784.patch
-pve/0041-Revert-block-rbd-fix-handling-of-holes-in-.bdrv_co_b.patch
-pve/0042-Revert-block-rbd-implement-bdrv_co_block_status.patch
-pve/0043-alloc-track-fix-deadlock-during-drop.patch
-pve/0044-migration-for-snapshots-hold-the-BQL-during-setup-ca.patch
-pve/0045-savevm-async-don-t-hold-BQL-during-setup.patch
+pve/0038-block-add-alloc-track-driver.patch
+pve/0039-Revert-block-rbd-workaround-for-ceph-issue-53784.patch
+pve/0040-Revert-block-rbd-fix-handling-of-holes-in-.bdrv_co_b.patch
+pve/0041-Revert-block-rbd-implement-bdrv_co_block_status.patch
+pve/0042-alloc-track-error-out-when-auto-remove-is-not-set.patch
+pve/0043-alloc-track-avoid-seemingly-superfluous-child-permis.patch
+pve/0044-block-copy-before-write-fix-permission.patch
+pve/0045-block-copy-before-write-support-unligned-snapshot-di.patch
+pve/0046-block-copy-before-write-create-block_copy-bitmap-in-.patch
+pve/0047-qapi-blockdev-backup-add-discard-source-parameter.patch
+pve/0048-copy-before-write-allow-specifying-minimum-cluster-s.patch
+pve/0049-backup-add-minimum-cluster-size-to-performance-optio.patch
+pve/0050-PVE-backup-add-fleecing-option.patch
+pve/0051-PVE-backup-improve-error-when-copy-before-write-fail.patch
+pve-qemu-9.0-vitastor.patch

debian/rules

@@ -38,7 +38,7 @@ endif
 
 	# guest-agent is only required for guest systems
 	./configure \
-	    --with-git-submodules=ignore \
+	    --disable-download \
 	    --docdir=/usr/share/doc/pve-qemu-kvm \
 	    --localstatedir=/var \
 	    --prefix=/usr \

debian/source/lintian-overrides

@@ -1 +1,2 @@
 source-is-missing [roms/SLOF/*.oco]
+source-is-missing [linux-user/*/vdso-*.so]

keycodemapdb/LICENSE.BSD

@@ -1,27 +0,0 @@
-Copyright (c) Individual contributors.
-All rights reserved.
-
-Redistribution and use in source and binary forms, with or without
-modification, are permitted provided that the following conditions are met:
-
-    1. Redistributions of source code must retain the above copyright notice,
-       this list of conditions and the following disclaimer.
-
-    2. Redistributions in binary form must reproduce the above copyright
-       notice, this list of conditions and the following disclaimer in the
-       documentation and/or other materials provided with the distribution.
-
-    3. Neither the name of PyCA Cryptography nor the names of its contributors
-       may be used to endorse or promote products derived from this software
-       without specific prior written permission.
-
-THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
-ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
-ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

keycodemapdb/LICENSE.GPL2

@@ -1,339 +0,0 @@
-		    GNU GENERAL PUBLIC LICENSE
-		       Version 2, June 1991
-
- Copyright (C) 1989, 1991 Free Software Foundation, Inc.,
- 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
- Everyone is permitted to copy and distribute verbatim copies
- of this license document, but changing it is not allowed.
-
-			    Preamble
-
-  The licenses for most software are designed to take away your
-freedom to share and change it.  By contrast, the GNU General Public
-License is intended to guarantee your freedom to share and change free
-software--to make sure the software is free for all its users.  This
-General Public License applies to most of the Free Software
-Foundation's software and to any other program whose authors commit to
-using it.  (Some other Free Software Foundation software is covered by
-the GNU Lesser General Public License instead.)  You can apply it to
-your programs, too.
-
-  When we speak of free software, we are referring to freedom, not
-price.  Our General Public Licenses are designed to make sure that you
-have the freedom to distribute copies of free software (and charge for
-this service if you wish), that you receive source code or can get it
-if you want it, that you can change the software or use pieces of it
-in new free programs; and that you know you can do these things.
-
-  To protect your rights, we need to make restrictions that forbid
-anyone to deny you these rights or to ask you to surrender the rights.
-These restrictions translate to certain responsibilities for you if you
-distribute copies of the software, or if you modify it.
-
-  For example, if you distribute copies of such a program, whether
-gratis or for a fee, you must give the recipients all the rights that
-you have.  You must make sure that they, too, receive or can get the
-source code.  And you must show them these terms so they know their
-rights.
-
-  We protect your rights with two steps: (1) copyright the software, and
-(2) offer you this license which gives you legal permission to copy,
-distribute and/or modify the software.
-
-  Also, for each author's protection and ours, we want to make certain
-that everyone understands that there is no warranty for this free
-software.  If the software is modified by someone else and passed on, we
-want its recipients to know that what they have is not the original, so
-that any problems introduced by others will not reflect on the original
-authors' reputations.
-
-  Finally, any free program is threatened constantly by software
-patents.  We wish to avoid the danger that redistributors of a free
-program will individually obtain patent licenses, in effect making the
-program proprietary.  To prevent this, we have made it clear that any
-patent must be licensed for everyone's free use or not licensed at all.
-
-  The precise terms and conditions for copying, distribution and
-modification follow.
-
-		    GNU GENERAL PUBLIC LICENSE
-   TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
-
-  0. This License applies to any program or other work which contains
-a notice placed by the copyright holder saying it may be distributed
-under the terms of this General Public License.  The "Program", below,
-refers to any such program or work, and a "work based on the Program"
-means either the Program or any derivative work under copyright law:
-that is to say, a work containing the Program or a portion of it,
-either verbatim or with modifications and/or translated into another
-language.  (Hereinafter, translation is included without limitation in
-the term "modification".)  Each licensee is addressed as "you".
-
-Activities other than copying, distribution and modification are not
-covered by this License; they are outside its scope.  The act of
-running the Program is not restricted, and the output from the Program
-is covered only if its contents constitute a work based on the
-Program (independent of having been made by running the Program).
-Whether that is true depends on what the Program does.
-
-  1. You may copy and distribute verbatim copies of the Program's
-source code as you receive it, in any medium, provided that you
-conspicuously and appropriately publish on each copy an appropriate
-copyright notice and disclaimer of warranty; keep intact all the
-notices that refer to this License and to the absence of any warranty;
-and give any other recipients of the Program a copy of this License
-along with the Program.
-
-You may charge a fee for the physical act of transferring a copy, and
-you may at your option offer warranty protection in exchange for a fee.
-
-  2. You may modify your copy or copies of the Program or any portion
-of it, thus forming a work based on the Program, and copy and
-distribute such modifications or work under the terms of Section 1
-above, provided that you also meet all of these conditions:
-
-    a) You must cause the modified files to carry prominent notices
-    stating that you changed the files and the date of any change.
-
-    b) You must cause any work that you distribute or publish, that in
-    whole or in part contains or is derived from the Program or any
-    part thereof, to be licensed as a whole at no charge to all third
-    parties under the terms of this License.
-
-    c) If the modified program normally reads commands interactively
-    when run, you must cause it, when started running for such
-    interactive use in the most ordinary way, to print or display an
-    announcement including an appropriate copyright notice and a
-    notice that there is no warranty (or else, saying that you provide
-    a warranty) and that users may redistribute the program under
-    these conditions, and telling the user how to view a copy of this
-    License.  (Exception: if the Program itself is interactive but
-    does not normally print such an announcement, your work based on
-    the Program is not required to print an announcement.)
-
-These requirements apply to the modified work as a whole.  If
-identifiable sections of that work are not derived from the Program,
-and can be reasonably considered independent and separate works in
-themselves, then this License, and its terms, do not apply to those
-sections when you distribute them as separate works.  But when you
-distribute the same sections as part of a whole which is a work based
-on the Program, the distribution of the whole must be on the terms of
-this License, whose permissions for other licensees extend to the
-entire whole, and thus to each and every part regardless of who wrote it.
-
-Thus, it is not the intent of this section to claim rights or contest
-your rights to work written entirely by you; rather, the intent is to
-exercise the right to control the distribution of derivative or
-collective works based on the Program.
-
-In addition, mere aggregation of another work not based on the Program
-with the Program (or with a work based on the Program) on a volume of
-a storage or distribution medium does not bring the other work under
-the scope of this License.
-
-  3. You may copy and distribute the Program (or a work based on it,
-under Section 2) in object code or executable form under the terms of
-Sections 1 and 2 above provided that you also do one of the following:
-
-    a) Accompany it with the complete corresponding machine-readable
-    source code, which must be distributed under the terms of Sections
-    1 and 2 above on a medium customarily used for software interchange; or,
-
-    b) Accompany it with a written offer, valid for at least three
-    years, to give any third party, for a charge no more than your
-    cost of physically performing source distribution, a complete
-    machine-readable copy of the corresponding source code, to be
-    distributed under the terms of Sections 1 and 2 above on a medium
-    customarily used for software interchange; or,
-
-    c) Accompany it with the information you received as to the offer
-    to distribute corresponding source code.  (This alternative is
-    allowed only for noncommercial distribution and only if you
-    received the program in object code or executable form with such
-    an offer, in accord with Subsection b above.)
-
-The source code for a work means the preferred form of the work for
-making modifications to it.  For an executable work, complete source
-code means all the source code for all modules it contains, plus any
-associated interface definition files, plus the scripts used to
-control compilation and installation of the executable.  However, as a
-special exception, the source code distributed need not include
-anything that is normally distributed (in either source or binary
-form) with the major components (compiler, kernel, and so on) of the
-operating system on which the executable runs, unless that component
-itself accompanies the executable.
-
-If distribution of executable or object code is made by offering
-access to copy from a designated place, then offering equivalent
-access to copy the source code from the same place counts as
-distribution of the source code, even though third parties are not
-compelled to copy the source along with the object code.
-
-  4. You may not copy, modify, sublicense, or distribute the Program
-except as expressly provided under this License.  Any attempt
-otherwise to copy, modify, sublicense or distribute the Program is
-void, and will automatically terminate your rights under this License.
-However, parties who have received copies, or rights, from you under
-this License will not have their licenses terminated so long as such
-parties remain in full compliance.
-
-  5. You are not required to accept this License, since you have not
-signed it.  However, nothing else grants you permission to modify or
-distribute the Program or its derivative works.  These actions are
-prohibited by law if you do not accept this License.  Therefore, by
-modifying or distributing the Program (or any work based on the
-Program), you indicate your acceptance of this License to do so, and
-all its terms and conditions for copying, distributing or modifying
-the Program or works based on it.
-
-  6. Each time you redistribute the Program (or any work based on the
-Program), the recipient automatically receives a license from the
-original licensor to copy, distribute or modify the Program subject to
-these terms and conditions.  You may not impose any further
-restrictions on the recipients' exercise of the rights granted herein.
-You are not responsible for enforcing compliance by third parties to
-this License.
-
-  7. If, as a consequence of a court judgment or allegation of patent
-infringement or for any other reason (not limited to patent issues),
-conditions are imposed on you (whether by court order, agreement or
-otherwise) that contradict the conditions of this License, they do not
-excuse you from the conditions of this License.  If you cannot
-distribute so as to satisfy simultaneously your obligations under this
-License and any other pertinent obligations, then as a consequence you
-may not distribute the Program at all.  For example, if a patent
-license would not permit royalty-free redistribution of the Program by
-all those who receive copies directly or indirectly through you, then
-the only way you could satisfy both it and this License would be to
-refrain entirely from distribution of the Program.
-
-If any portion of this section is held invalid or unenforceable under
-any particular circumstance, the balance of the section is intended to
-apply and the section as a whole is intended to apply in other
-circumstances.
-
-It is not the purpose of this section to induce you to infringe any
-patents or other property right claims or to contest validity of any
-such claims; this section has the sole purpose of protecting the
-integrity of the free software distribution system, which is
-implemented by public license practices.  Many people have made
-generous contributions to the wide range of software distributed
-through that system in reliance on consistent application of that
-system; it is up to the author/donor to decide if he or she is willing
-to distribute software through any other system and a licensee cannot
-impose that choice.
-
-This section is intended to make thoroughly clear what is believed to
-be a consequence of the rest of this License.
-
-  8. If the distribution and/or use of the Program is restricted in
-certain countries either by patents or by copyrighted interfaces, the
-original copyright holder who places the Program under this License
-may add an explicit geographical distribution limitation excluding
-those countries, so that distribution is permitted only in or among
-countries not thus excluded.  In such case, this License incorporates
-the limitation as if written in the body of this License.
-
-  9. The Free Software Foundation may publish revised and/or new versions
-of the General Public License from time to time.  Such new versions will
-be similar in spirit to the present version, but may differ in detail to
-address new problems or concerns.
-
-Each version is given a distinguishing version number.  If the Program
-specifies a version number of this License which applies to it and "any
-later version", you have the option of following the terms and conditions
-either of that version or of any later version published by the Free
-Software Foundation.  If the Program does not specify a version number of
-this License, you may choose any version ever published by the Free Software
-Foundation.
-
-  10. If you wish to incorporate parts of the Program into other free
-programs whose distribution conditions are different, write to the author
-to ask for permission.  For software which is copyrighted by the Free
-Software Foundation, write to the Free Software Foundation; we sometimes
-make exceptions for this.  Our decision will be guided by the two goals
-of preserving the free status of all derivatives of our free software and
-of promoting the sharing and reuse of software generally.
-
-			    NO WARRANTY
-
-  11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
-FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW.  EXCEPT WHEN
-OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
-PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
-OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  THE ENTIRE RISK AS
-TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU.  SHOULD THE
-PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
-REPAIR OR CORRECTION.
-
-  12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
-WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
-REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
-INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
-OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
-TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
-YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
-PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
-POSSIBILITY OF SUCH DAMAGES.
-
-		     END OF TERMS AND CONDITIONS
-
-	    How to Apply These Terms to Your New Programs
-
-  If you develop a new program, and you want it to be of the greatest
-possible use to the public, the best way to achieve this is to make it
-free software which everyone can redistribute and change under these terms.
-
-  To do so, attach the following notices to the program.  It is safest
-to attach them to the start of each source file to most effectively
-convey the exclusion of warranty; and each file should have at least
-the "copyright" line and a pointer to where the full notice is found.
-
-    <one line to give the program's name and a brief idea of what it does.>
-    Copyright (C) <year>  <name of author>
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License along
-    with this program; if not, write to the Free Software Foundation, Inc.,
-    51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
-
-Also add information on how to contact you by electronic and paper mail.
-
-If the program is interactive, make it output a short notice like this
-when it starts in an interactive mode:
-
-    Gnomovision version 69, Copyright (C) year name of author
-    Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
-    This is free software, and you are welcome to redistribute it
-    under certain conditions; type `show c' for details.
-
-The hypothetical commands `show w' and `show c' should show the appropriate
-parts of the General Public License.  Of course, the commands you use may
-be called something other than `show w' and `show c'; they could even be
-mouse-clicks or menu items--whatever suits your program.
-
-You should also get your employer (if you work as a programmer) or your
-school, if any, to sign a "copyright disclaimer" for the program, if
-necessary.  Here is a sample; alter the names:
-
-  Yoyodyne, Inc., hereby disclaims all copyright interest in the program
-  `Gnomovision' (which makes passes at compilers) written by James Hacker.
-
-  <signature of Ty Coon>, 1 April 1989
-  Ty Coon, President of Vice
-
-This General Public License does not permit incorporating your program into
-proprietary programs.  If your program is a subroutine library, you may
-consider it more useful to permit linking proprietary applications with the
-library.  If this is what you want to do, use the GNU Lesser General
-Public License instead of this License.

keycodemapdb/README

@@ -1,114 +0,0 @@
-   Key code / scan code / key symbol mapping database
-   ==================================================
-
-This module provides a database that maps between different
-key code / scan code / key symbol sets:
-
- - Linux evdev
- - OS-X
- - AT Set 1
- - AT Set 2
- - AT Set 3
- - XT
- - Linux XT KBD driver
- - USB HID
- - Win32
- - XWin XT
- - XKBD XT
- - Xorg Evdev
- - Xorg KBD
- - Xorg OS-X
- - XOrg Cygwin
- - RFB
-
-Licensing
----------
-
-The contents of this package are dual licensed under the terms of:
-
- - GNU General Public License (version 2 or later)
- - 3-clause BSD License
-
-The output files generated by keymap-gen may be distributed & used under
-the terms of either of the above licenses.
-
-Data formats
-------------
-
-The following output formats are possible
-
- - Code map
-
-   An array mapping between key code sets values
-
-   Indexes in the array are values from the source code set.
-   Entries in the array are values from the target code set
-
-
- - Code table
-
-   An array listing all values in a key code set
-
-   Indexes in the array are simply a numeric counter
-   Entries in the array are values from the key code set
-
-   The size of the array matches the total number of entries in
-   the keycode database.
-
-
- - Name map
-
-   An array mapping between key code sets values and names
-
-   Indexes in the array are values from the source code set
-   Entries in the array are names from the target code set
-
-
- - Name table
-
-   An array listing all names in a key code set
-
-   Indexes in the array are simply a numeric counter
-   Entries in the array are values from the key code set
-
-   The size of the array matches the total number of entries in
-   the keycode database.
-
-
-Output languages
-----------------
-
-The tool is capable of generating data tables for the following
-programming languages / environments
-
- - Standard C
- - GLib2 (standard C, but with GLib2 data types)
- - Python
- - Perl
-
-
-Usage
------
-
-Map values from AT Set 1 to USB HID, generating tables for the
-C programming language
-
- $ keymap-gen --lang stdc code-map data/keymaps.csv atset1 usb
-
-Generate a tables of names for Linux key codes, OS-X key codes,
-in python - equivalent array indexes map between the two sets.
-A variable name override is used
-
- $ keymap-gen --varname linux_keycodes --lang stdc \
-              code-table data/keymaps.csv linux
- $ keymap-gen --varname osx_keycodes --lang stdc \
-              code-table data/keymaps.csv os-x
-
-Generate a mapping from XOrg XWin values to Win32 names
-
- $ keymap-gen --lang perl name-map data/keymaps.csv xorgxwin win32
-
-Generate a table of names for Linux key codes in Perl
-
- $ keymap-gen --lang perl name-table data/keymaps.csv linux
-

keycodemapdb/data/README

@@ -1,89 +0,0 @@
-This directory contains the raw data for mapping between different
-keyboard codes. Naming if often based on the US keyboard layout, but
-does not indicate the symbol actually generated by the key.
-
-The columns currently in this data set are:
-
-Linux
------
-
-Name and value of the hardware independent keycodes used by the linux
-kernel and exposed through the input subsystem.
-
-References: linux/input.h
-
-macOS
------
-
-Low level key codes as exposed by Mac OS X/macOS.
-
-References: Carbon/HIToolbox/Events.h
-
-PC scan code sets
------------------
-
-Scan codes for the three orignal PC keyboard generations:
-
- Set 1: XT
- Set 2: AT
- Set 3: PS/2
-
-The sets include codes for modern keys as well and not just the keys
-present on those original keyboards.
-
-References: linux/drivers/input/keyboard/atkbd.c
-
-USB HID
--------
-
-Codes as specified by the HID profile in USB.
-
-References: linux/drivers/hid/usbhid/usbkbd.c
-
-Windows Virtual-key codes
--------------------------
-
-The low level, hardware independent "VKEYs" exposed by Windows.
-
-References: mingw32/winuser.h
-
-XWin XT
--------
-
-X11 keycodes generated by the XWin server. Based on the XT scan code
-set.
-
-References: xorg-server/hw/xwin/{winkeybd.c,winkeynames.h}
-
-Xfree86 KBD XT
---------------
-
-X11 keycodes generated by the Xfree86 keyboard drivers. Based on the XT
-scan code set.
-
-References: xf86-input-keyboard/src/at_scancode.c
-
-X11 keysyms
------------
-
-Corresponding X11 keysym value(s) for a US keyboard layout.
-
-WARNING: These columns represent symbols, not physical keys, and should
-         be used with extreme care.
-
-References: http://cgit.freedesktop.org/xorg/proto/x11proto/plain/keysymdef.h
-
-HTML KeyboardEvent.code
------------------------
-
-Key codes seen in the KeyboardEvent.code attribute as part of the
-UI Events specification.
-
-References: https://www.w3.org/TR/uievents-code/
-
-XKEYBOARD key names
--------------------
-
-Hardware independent key names as used in the XKEYBOARD extension.
-
-References: /usr/share/X11/xkb/keycodes/

keycodemapdb/data/keymaps.csv

@@ -1,539 +0,0 @@
-"Linux Name","Linux Keycode","OS-X Name","OS-X Keycode","AT set1 keycode","AT set2 keycode","AT set3 keycode","USB Keycodes","Win32 Name","Win32 Keycode","Xwin XT","Xfree86 KBD XT","X11 keysym name","X11 keysym","HTML code","XKB key name","QEMU QKeyCode","Sun KBD","Apple ADB"
-KEY_RESERVED,0,,0xff,,,,,,,,,,,,,unmapped,,0xff
-KEY_ESC,1,Escape,0x35,0x01,0x76,0x08,41,VK_ESCAPE,0x1b,1,1,XK_Escape,0xff1b,Escape,ESC,esc,0x1d,0x35
-KEY_1,2,ANSI_1,0x12,0x02,0x16,0x16,30,VK_1,0x31,2,2,XK_1,0x0031,Digit1,AE01,1,0x1e,0x12
-KEY_1,2,ANSI_1,0x12,0x02,0x16,0x16,30,VK_1,0x31,2,2,XK_exclam,0x0021,Digit1,AE01,1,0x1e,0x12
-KEY_2,3,ANSI_2,0x13,0x03,0x1e,0x1e,31,VK_2,0x32,3,3,XK_2,0x0032,Digit2,AE02,2,0x1f,0x13
-KEY_2,3,ANSI_2,0x13,0x03,0x1e,0x1e,31,VK_2,0x32,3,3,XK_at,0x0040,Digit2,AE02,2,0x1f,0x13
-KEY_3,4,ANSI_3,0x14,0x04,0x26,0x26,32,VK_3,0x33,4,4,XK_3,0x0033,Digit3,AE03,3,0x20,0x14
-KEY_3,4,ANSI_3,0x14,0x04,0x26,0x26,32,VK_3,0x33,4,4,XK_numbersign,0x0023,Digit3,AE03,3,0x20,0x14
-KEY_4,5,ANSI_4,0x15,0x05,0x25,0x25,33,VK_4,0x34,5,5,XK_4,0x0034,Digit4,AE04,4,0x21,0x15
-KEY_4,5,ANSI_4,0x15,0x05,0x25,0x25,33,VK_4,0x34,5,5,XK_dollar,0x0024,Digit4,AE04,4,0x21,0x15
-KEY_5,6,ANSI_5,0x17,0x06,0x2e,0x2e,34,VK_5,0x35,6,6,XK_5,0x0035,Digit5,AE05,5,0x22,0x17
-KEY_5,6,ANSI_5,0x17,0x06,0x2e,0x2e,34,VK_5,0x35,6,6,XK_percent,0x0025,Digit5,AE05,5,0x22,0x17
-KEY_6,7,ANSI_6,0x16,0x07,0x36,0x36,35,VK_6,0x36,7,7,XK_6,0x0036,Digit6,AE06,6,0x23,0x16
-KEY_6,7,ANSI_6,0x16,0x07,0x36,0x36,35,VK_6,0x36,7,7,XK_asciicircum,0x005e,Digit6,AE06,6,0x23,0x16
-KEY_7,8,ANSI_7,0x1a,0x08,0x3d,0x3d,36,VK_7,0x37,8,8,XK_7,0x0037,Digit7,AE07,7,0x24,0x1a
-KEY_7,8,ANSI_7,0x1a,0x08,0x3d,0x3d,36,VK_7,0x37,8,8,XK_ampersand,0x0026,Digit7,AE07,7,0x24,0x1a
-KEY_8,9,ANSI_8,0x1c,0x09,0x3e,0x3e,37,VK_8,0x38,9,9,XK_8,0x0038,Digit8,AE08,8,0x25,0x1c
-KEY_8,9,ANSI_8,0x1c,0x09,0x3e,0x3e,37,VK_8,0x38,9,9,XK_asterisk,0x002a,Digit8,AE08,8,0x25,0x1c
-KEY_9,10,ANSI_9,0x19,0x0a,0x46,0x46,38,VK_9,0x39,10,10,XK_9,0x0039,Digit9,AE09,9,0x26,0x19
-KEY_9,10,ANSI_9,0x19,0x0a,0x46,0x46,38,VK_9,0x39,10,10,XK_parenleft,0x0028,Digit9,AE09,9,0x26,0x19
-KEY_0,11,ANSI_0,0x1d,0x0b,0x45,0x45,39,VK_0,0x30,11,11,XK_0,0x0030,Digit0,AE10,0,0x27,0x1d
-KEY_0,11,ANSI_0,0x1d,0x0b,0x45,0x45,39,VK_0,0x30,11,11,XK_parenright,0x0029,Digit0,AE10,0,0x27,0x1d
-KEY_MINUS,12,ANSI_Minus,0x1b,0x0c,0x4e,0x4e,45,VK_OEM_MINUS,0xbd,12,12,XK_minus,0x002d,Minus,AE11,minus,0x28,0x1b
-KEY_MINUS,12,ANSI_Minus,0x1b,0x0c,0x4e,0x4e,45,VK_OEM_MINUS,0xbd,12,12,XK_underscore,0x005f,Minus,AE11,minus,0x28,0x1b
-KEY_EQUAL,13,ANSI_Equal,0x18,0x0d,0x55,0x55,46,VK_OEM_PLUS,0xbb,13,13,XK_equal,0x003d,Equal,AE12,equal,0x29,0x18
-KEY_EQUAL,13,ANSI_Equal,0x18,0x0d,0x55,0x55,46,VK_OEM_PLUS,0xbb,13,13,XK_plus,0x002b,Equal,AE12,equal,0x29,0x18
-KEY_BACKSPACE,14,Delete,0x33,0x0e,0x66,0x66,42,VK_BACK,0x08,14,14,XK_BackSpace,0xff08,Backspace,BKSP,backspace,0x2b,0x33
-KEY_TAB,15,Tab,0x30,0x0f,0x0d,0x0d,43,VK_TAB,0x09,15,15,XK_Tab,0xff09,Tab,TAB,tab,0x35,0x30
-KEY_Q,16,ANSI_Q,0xc,0x10,0x15,0x15,20,VK_Q,0x51,16,16,XK_Q,0x0051,KeyQ,AD01,q,0x36,0xc
-KEY_Q,16,ANSI_Q,0xc,0x10,0x15,0x15,20,VK_Q,0x51,16,16,XK_q,0x0071,KeyQ,AD01,q,0x36,0xc
-KEY_W,17,ANSI_W,0xd,0x11,0x1d,0x1d,26,VK_W,0x57,17,17,XK_W,0x0057,KeyW,AD02,w,0x37,0xd
-KEY_W,17,ANSI_W,0xd,0x11,0x1d,0x1d,26,VK_W,0x57,17,17,XK_w,0x0077,KeyW,AD02,w,0x37,0xd
-KEY_E,18,ANSI_E,0xe,0x12,0x24,0x24,8,VK_E,0x45,18,18,XK_E,0x0045,KeyE,AD03,e,0x38,0xe
-KEY_E,18,ANSI_E,0xe,0x12,0x24,0x24,8,VK_E,0x45,18,18,XK_e,0x0065,KeyE,AD03,e,0x38,0xe
-KEY_R,19,ANSI_R,0xf,0x13,0x2d,0x2d,21,VK_R,0x52,19,19,XK_R,0x0052,KeyR,AD04,r,0x39,0xf
-KEY_R,19,ANSI_R,0xf,0x13,0x2d,0x2d,21,VK_R,0x52,19,19,XK_r,0x0072,KeyR,AD04,r,0x39,0xf
-KEY_T,20,ANSI_T,0x11,0x14,0x2c,0x2c,23,VK_T,0x54,20,20,XK_T,0x0054,KeyT,AD05,t,0x3a,0x11
-KEY_T,20,ANSI_T,0x11,0x14,0x2c,0x2c,23,VK_T,0x54,20,20,XK_t,0x0074,KeyT,AD05,t,0x3a,0x11
-KEY_Y,21,ANSI_Y,0x10,0x15,0x35,0x35,28,VK_Y,0x59,21,21,XK_Y,0x0059,KeyY,AD06,y,0x3b,0x10
-KEY_Y,21,ANSI_Y,0x10,0x15,0x35,0x35,28,VK_Y,0x59,21,21,XK_y,0x0079,KeyY,AD06,y,0x3b,0x10
-KEY_U,22,ANSI_U,0x20,0x16,0x3c,0x3c,24,VK_U,0x55,22,22,XK_U,0x0055,KeyU,AD07,u,0x3c,0x20
-KEY_U,22,ANSI_U,0x20,0x16,0x3c,0x3c,24,VK_U,0x55,22,22,XK_u,0x0075,KeyU,AD07,u,0x3c,0x20
-KEY_I,23,ANSI_I,0x22,0x17,0x43,0x43,12,VK_I,0x49,23,23,XK_I,0x0049,KeyI,AD08,i,0x3d,0x22
-KEY_I,23,ANSI_I,0x22,0x17,0x43,0x43,12,VK_I,0x49,23,23,XK_i,0x0069,KeyI,AD08,i,0x3d,0x22
-KEY_O,24,ANSI_O,0x1f,0x18,0x44,0x44,18,VK_O,0x4f,24,24,XK_O,0x004f,KeyO,AD09,o,0x3e,0x1f
-KEY_O,24,ANSI_O,0x1f,0x18,0x44,0x44,18,VK_O,0x4f,24,24,XK_o,0x006f,KeyO,AD09,o,0x3e,0x1f
-KEY_P,25,ANSI_P,0x23,0x19,0x4d,0x4d,19,VK_P,0x50,25,25,XK_P,0x0050,KeyP,AD10,p,0x3f,0x23
-KEY_P,25,ANSI_P,0x23,0x19,0x4d,0x4d,19,VK_P,0x50,25,25,XK_p,0x0070,KeyP,AD10,p,0x3f,0x23
-KEY_LEFTBRACE,26,ANSI_LeftBracket,0x21,0x1a,0x54,0x54,47,VK_OEM_4,0xdb,26,26,XK_bracketleft,0x005b,BracketLeft,AD11,bracket_left,0x40,0x21
-KEY_LEFTBRACE,26,ANSI_LeftBracket,0x21,0x1a,0x54,0x54,47,VK_OEM_4,0xdb,26,26,XK_braceleft,0x007b,BracketLeft,AD11,bracket_left,0x40,0x21
-KEY_RIGHTBRACE,27,ANSI_RightBracket,0x1e,0x1b,0x5b,0x5b,48,VK_OEM_6,0xdd,27,27,XK_bracketright,0x005d,BracketRight,AD12,bracket_right,0x41,0x1e
-KEY_RIGHTBRACE,27,ANSI_RightBracket,0x1e,0x1b,0x5b,0x5b,48,VK_OEM_6,0xdd,27,27,XK_braceright,0x007d,BracketRight,AD12,bracket_right,0x41,0x1e
-KEY_ENTER,28,Return,0x24,0x1c,0x5a,0x5a,40,VK_RETURN,0x0d,28,28,XK_Return,0xff0d,Enter,RTRN,ret,0x59,0x24
-KEY_LEFTCTRL,29,Control,0x3b,0x1d,0x14,0x11,224,VK_LCONTROL,0xa2,29,29,XK_Control_L,0xffe3,ControlLeft,LCTL,ctrl,0x4c,0x36
-KEY_LEFTCTRL,29,Control,0x3b,0x1d,0x14,0x11,224,VK_CONTROL,0x11,29,29,XK_Control_L,0xffe3,ControlLeft,LCTL,ctrl,0x4c,0x36
-KEY_A,30,ANSI_A,0x0,0x1e,0x1c,0x1c,4,VK_A,0x41,30,30,XK_A,0x0041,KeyA,AC01,a,0x4d,0x0
-KEY_A,30,ANSI_A,0x0,0x1e,0x1c,0x1c,4,VK_A,0x41,30,30,XK_a,0x0061,KeyA,AC01,a,0x4d,0x0
-KEY_S,31,ANSI_S,0x1,0x1f,0x1b,0x1b,22,VK_S,0x53,31,31,XK_S,0x0053,KeyS,AC02,s,0x4e,0x1
-KEY_S,31,ANSI_S,0x1,0x1f,0x1b,0x1b,22,VK_S,0x53,31,31,XK_s,0x0073,KeyS,AC02,s,0x4e,0x1
-KEY_D,32,ANSI_D,0x2,0x20,0x23,0x23,7,VK_D,0x44,32,32,XK_D,0x0044,KeyD,AC03,d,0x4f,0x2
-KEY_D,32,ANSI_D,0x2,0x20,0x23,0x23,7,VK_D,0x44,32,32,XK_d,0x0064,KeyD,AC03,d,0x4f,0x2
-KEY_F,33,ANSI_F,0x3,0x21,0x2b,0x2b,9,VK_F,0x46,33,33,XK_F,0x0046,KeyF,AC04,f,0x50,0x3
-KEY_F,33,ANSI_F,0x3,0x21,0x2b,0x2b,9,VK_F,0x46,33,33,XK_f,0x0066,KeyF,AC04,f,0x50,0x3
-KEY_G,34,ANSI_G,0x5,0x22,0x34,0x34,10,VK_G,0x47,34,34,XK_G,0x0047,KeyG,AC05,g,0x51,0x5
-KEY_G,34,ANSI_G,0x5,0x22,0x34,0x34,10,VK_G,0x47,34,34,XK_g,0x0067,KeyG,AC05,g,0x51,0x5
-KEY_H,35,ANSI_H,0x4,0x23,0x33,0x33,11,VK_H,0x48,35,35,XK_H,0x0048,KeyH,AC06,h,0x52,0x4
-KEY_H,35,ANSI_H,0x4,0x23,0x33,0x33,11,VK_H,0x48,35,35,XK_h,0x0068,KeyH,AC06,h,0x52,0x4
-KEY_J,36,ANSI_J,0x26,0x24,0x3b,0x3b,13,VK_J,0x4a,36,36,XK_J,0x004a,KeyJ,AC07,j,0x53,0x26
-KEY_J,36,ANSI_J,0x26,0x24,0x3b,0x3b,13,VK_J,0x4a,36,36,XK_j,0x006a,KeyJ,AC07,j,0x53,0x26
-KEY_K,37,ANSI_K,0x28,0x25,0x42,0x42,14,VK_K,0x4b,37,37,XK_K,0x004b,KeyK,AC08,k,0x54,0x28
-KEY_K,37,ANSI_K,0x28,0x25,0x42,0x42,14,VK_K,0x4b,37,37,XK_k,0x006b,KeyK,AC08,k,0x54,0x28
-KEY_L,38,ANSI_L,0x25,0x26,0x4b,0x4b,15,VK_L,0x4c,38,38,XK_L,0x004c,KeyL,AC09,l,0x55,0x25
-KEY_L,38,ANSI_L,0x25,0x26,0x4b,0x4b,15,VK_L,0x4c,38,38,XK_l,0x006c,KeyL,AC09,l,0x55,0x25
-KEY_SEMICOLON,39,ANSI_Semicolon,0x29,0x27,0x4c,0x4c,51,VK_OEM_1,0xba,39,39,XK_semicolon,0x003b,Semicolon,AC10,semicolon,0x56,0x29
-KEY_SEMICOLON,39,ANSI_Semicolon,0x29,0x27,0x4c,0x4c,51,VK_OEM_1,0xba,39,39,XK_colon,0x003a,Semicolon,AC10,semicolon,0x56,0x29
-KEY_APOSTROPHE,40,ANSI_Quote,0x27,0x28,0x52,0x52,52,VK_OEM_7,0xde,40,40,XK_apostrophe,0x0027,Quote,AC11,apostrophe,0x57,0x27
-KEY_APOSTROPHE,40,ANSI_Quote,0x27,0x28,0x52,0x52,52,VK_OEM_7,0xde,40,40,XK_quotedbl,0x0022,Quote,AC11,apostrophe,0x57,0x27
-KEY_GRAVE,41,ANSI_Grave,0x32,0x29,0x0e,0x0e,53,VK_OEM_3,0xc0,41,41,XK_grave,0x0060,Backquote,TLDE,grave_accent,0x2a,0x32
-KEY_GRAVE,41,ANSI_Grave,0x32,0x29,0x0e,0x0e,53,VK_OEM_3,0xc0,41,41,XK_grave,0x0060,Backquote,AB00,grave_accent,0x2a,0x32
-KEY_GRAVE,41,ANSI_Grave,0x32,0x29,0x0e,0x0e,53,VK_OEM_3,0xc0,41,41,XK_asciitilde,0x007e,Backquote,TLDE,grave_accent,0x2a,0x32
-KEY_GRAVE,41,ANSI_Grave,0x32,0x29,0x0e,0x0e,53,VK_OEM_3,0xc0,41,41,XK_asciitilde,0x007e,Backquote,AB00,grave_accent,0x2a,0x32
-KEY_SHIFT,42,Shift,0x38,0x2a,0x12,0x12,225,VK_SHIFT,0x10,42,42,XK_Shift_L,0xffe1,ShiftLeft,LFSH,shift,0x63,0x38
-KEY_LEFTSHIFT,42,Shift,0x38,0x2a,0x12,0x12,225,VK_LSHIFT,0xa0,42,42,XK_Shift_L,0xffe1,ShiftLeft,LFSH,shift,0x63,0x38
-KEY_BACKSLASH,43,ANSI_Backslash,0x2a,0x2b,0x5d,0x5c,49,VK_OEM_5,0xdc,43,43,XK_backslash,0x005c,Backslash,BKSL,backslash,0x58,0x2a
-KEY_BACKSLASH,43,ANSI_Backslash,0x2a,0x2b,0x5d,0x5c,49,VK_OEM_5,0xdc,43,43,XK_backslash,0x005c,Backslash,AC12,backslash,0x58,0x2a
-KEY_BACKSLASH,43,ANSI_Backslash,0x2a,0x2b,0x5d,0x5c,49,VK_OEM_5,0xdc,43,43,XK_bar,0x007c,Backslash,BKSL,backslash,0x58,0x2a
-KEY_BACKSLASH,43,ANSI_Backslash,0x2a,0x2b,0x5d,0x5c,49,VK_OEM_5,0xdc,43,43,XK_bar,0x007c,Backslash,AC12,backslash,0x58,0x2a
-KEY_BACKSLASH,43,ANSI_Backslash,0x2a,0x2b,0x5d,0x5c,50,VK_OEM_5,0xdc,43,43,XK_backslash,0x005c,Backslash,BKSL,backslash,0x58,0x2a
-KEY_BACKSLASH,43,ANSI_Backslash,0x2a,0x2b,0x5d,0x5c,50,VK_OEM_5,0xdc,43,43,XK_backslash,0x005c,Backslash,AC12,backslash,0x58,0x2a
-KEY_BACKSLASH,43,ANSI_Backslash,0x2a,0x2b,0x5d,0x5c,50,VK_OEM_5,0xdc,43,43,XK_bar,0x007c,Backslash,BKSL,backslash,0x58,0x2a
-KEY_BACKSLASH,43,ANSI_Backslash,0x2a,0x2b,0x5d,0x5c,50,VK_OEM_5,0xdc,43,43,XK_bar,0x007c,Backslash,AC12,backslash,0x58,0x2a
-KEY_Z,44,ANSI_Z,0x6,0x2c,0x1a,0x1a,29,VK_Z,0x5a,44,44,XK_Z,0x005a,KeyZ,AB01,z,0x64,0x6
-KEY_Z,44,ANSI_Z,0x6,0x2c,0x1a,0x1a,29,VK_Z,0x5a,44,44,XK_z,0x007a,KeyZ,AB01,z,0x64,0x6
-KEY_X,45,ANSI_X,0x7,0x2d,0x22,0x22,27,VK_X,0x58,45,45,XK_X,0x0058,KeyX,AB02,x,0x65,0x7
-KEY_X,45,ANSI_X,0x7,0x2d,0x22,0x22,27,VK_X,0x58,45,45,XK_x,0x0078,KeyX,AB02,x,0x65,0x7
-KEY_C,46,ANSI_C,0x8,0x2e,0x21,0x21,6,VK_C,0x43,46,46,XK_C,0x0043,KeyC,AB03,c,0x66,0x8
-KEY_C,46,ANSI_C,0x8,0x2e,0x21,0x21,6,VK_C,0x43,46,46,XK_c,0x0063,KeyC,AB03,c,0x66,0x8
-KEY_V,47,ANSI_V,0x9,0x2f,0x2a,0x2a,25,VK_V,0x56,47,47,XK_V,0x0056,KeyV,AB04,v,0x67,0x9
-KEY_V,47,ANSI_V,0x9,0x2f,0x2a,0x2a,25,VK_V,0x56,47,47,XK_v,0x0076,KeyV,AB04,v,0x67,0x9
-KEY_B,48,ANSI_B,0xb,0x30,0x32,0x32,5,VK_B,0x42,48,48,XK_B,0x0042,KeyB,AB05,b,0x68,0xb
-KEY_B,48,ANSI_B,0xb,0x30,0x32,0x32,5,VK_B,0x42,48,48,XK_b,0x0062,KeyB,AB05,b,0x68,0xb
-KEY_N,49,ANSI_N,0x2d,0x31,0x31,0x31,17,VK_N,0x4e,49,49,XK_N,0x004e,KeyN,AB06,n,0x69,0x2d
-KEY_N,49,ANSI_N,0x2d,0x31,0x31,0x31,17,VK_N,0x4e,49,49,XK_n,0x006e,KeyN,AB06,n,0x69,0x2d
-KEY_M,50,ANSI_M,0x2e,0x32,0x3a,0x3a,16,VK_M,0x4d,50,50,XK_M,0x004d,KeyM,AB07,m,0x6a,0x2e
-KEY_M,50,ANSI_M,0x2e,0x32,0x3a,0x3a,16,VK_M,0x4d,50,50,XK_m,0x006d,KeyM,AB07,m,0x6a,0x2e
-KEY_COMMA,51,ANSI_Comma,0x2b,0x33,0x41,0x41,54,VK_OEM_COMMA,0xbc,51,51,XK_comma,0x002c,Comma,AB08,comma,0x6b,0x2b
-KEY_COMMA,51,ANSI_Comma,0x2b,0x33,0x41,0x41,54,VK_OEM_COMMA,0xbc,51,51,XK_less,0x003c,Comma,AB08,comma,0x6b,0x2b
-KEY_DOT,52,ANSI_Period,0x2f,0x34,0x49,0x49,55,VK_OEM_PERIOD,0xbe,52,52,XK_period,0x002e,Period,AB09,dot,0x6c,0x2f
-KEY_DOT,52,ANSI_Period,0x2f,0x34,0x49,0x49,55,VK_OEM_PERIOD,0xbe,52,52,XK_greater,0x003e,Period,AB09,dot,0x6c,0x2f
-KEY_SLASH,53,ANSI_Slash,0x2c,0x35,0x4a,0x4a,56,VK_OEM_2,0xbf,53,53,XK_slash,0x002f,Slash,AB10,slash,0x6d,0x2c
-KEY_SLASH,53,ANSI_Slash,0x2c,0x35,0x4a,0x4a,56,VK_OEM_2,0xbf,53,53,XK_question,0x003f,Slash,AB10,slash,0x6d,0x2c
-KEY_RIGHTSHIFT,54,RightShift,0x3c,0x36,0x59,0x59,229,VK_RSHIFT,0xa1,54,54,XK_Shift_R,0xffe2,ShiftRight,RTSH,shift_r,0x6e,0x7b
-KEY_KPASTERISK,55,ANSI_KeypadMultiply,0x43,0x37,0x7c,0x7e,85,VK_MULTIPLY,0x6a,55,55,XK_multiply,0x00d7,NumpadMultiply,KPMU,asterisk,0x2f,0x43
-KEY_KPASTERISK,55,ANSI_KeypadMultiply,0x43,0x37,0x7c,0x7e,85,VK_MULTIPLY,0x6a,55,55,XK_multiply,0x00d7,NumpadMultiply,KPMU,kp_multiply,0x2f,0x43
-KEY_LEFTALT,56,Option,0x3a,0x38,0x11,0x19,226,VK_LMENU,0xa4,56,56,XK_Alt_L,0xffe9,AltLeft,LALT,alt,0x13,0x3a
-KEY_LEFTALT,56,Option,0x3a,0x38,0x11,0x19,226,VK_MENU,0x12,56,56,XK_Alt_L,0xffe9,AltLeft,LALT,alt,0x13,0x3a
-KEY_SPACE,57,Space,0x31,0x39,0x29,0x29,44,VK_SPACE,0x20,57,57,XK_space,0x0020,Space,SPCE,spc,0x79,0x31
-KEY_CAPSLOCK,58,CapsLock,0x39,0x3a,0x58,0x14,57,VK_CAPITAL,0x14,58,58,XK_Caps_Lock,0xffe5,CapsLock,CAPS,caps_lock,0x77,0x39
-KEY_F1,59,F1,0x7a,0x3b,0x05,0x07,58,VK_F1,0x70,59,59,XK_F1,0xffbe,F1,FK01,f1,0x05,0x7a
-KEY_F2,60,F2,0x78,0x3c,0x06,0x0f,59,VK_F2,0x71,60,60,XK_F2,0xffbf,F2,FK02,f2,0x06,0x78
-KEY_F3,61,F3,0x63,0x3d,0x04,0x17,60,VK_F3,0x72,61,61,XK_F3,0xffc0,F3,FK03,f3,0x08,0x63
-KEY_F4,62,F4,0x76,0x3e,0x0c,0x1f,61,VK_F4,0x73,62,62,XK_F4,0xffc1,F4,FK04,f4,0x0a,0x76
-KEY_F5,63,F5,0x60,0x3f,0x03,0x27,62,VK_F5,0x74,63,63,XK_F5,0xffc2,F5,FK05,f5,0x0c,0x60
-KEY_F6,64,F6,0x61,0x40,0x0b,0x2f,63,VK_F6,0x75,64,64,XK_F6,0xffc3,F6,FK06,f6,0x0e,0x61
-KEY_F7,65,F7,0x62,0x41,0x83,0x37,64,VK_F7,0x76,65,65,XK_F7,0xffc4,F7,FK07,f7,0x10,0x62
-KEY_F8,66,F8,0x64,0x42,0x0a,0x3f,65,VK_F8,0x77,66,66,XK_F8,0xffc5,F8,FK08,f8,0x11,0x64
-KEY_F9,67,F9,0x65,0x43,0x01,0x47,66,VK_F9,0x78,67,67,XK_F9,0xffc6,F9,FK09,f9,0x12,0x65
-KEY_F10,68,F10,0x6d,0x44,0x09,0x4f,67,VK_F10,0x79,68,68,XK_F10,0xffc7,F10,FK10,f10,0x07,0x6d
-KEY_NUMLOCK,69,ANSI_KeypadClear,0x47,0x45,0x77,0x76,83,VK_NUMLOCK,0x90,69,69,XK_Num_Lock,0xff7f,NumLock,NMLK,num_lock,0x62,0x47
-KEY_SCROLLLOCK,70,,,0x46,0x7e,0x5f,71,VK_SCROLL,0x91,70,70,XK_Scroll_Lock,0xff14,ScrollLock,SCLK,scroll_lock,0x17,0x6b
-KEY_KP7,71,ANSI_Keypad7,0x59,0x47,0x6c,0x6c,95,VK_NUMPAD7,0x67,71,71,XK_KP_7,0xffb7,Numpad7,KP7,kp_7,0x44,0x59
-KEY_KP8,72,ANSI_Keypad8,0x5b,0x48,0x75,0x75,96,VK_NUMPAD8,0x68,72,72,XK_KP_8,0xffb8,Numpad8,KP8,kp_8,0x45,0x5b
-KEY_KP9,73,ANSI_Keypad9,0x5c,0x49,0x7d,0x7d,97,VK_NUMPAD9,0x69,73,73,XK_KP_9,0xffb9,Numpad9,KP9,kp_9,0x46,0x5c
-KEY_KPMINUS,74,ANSI_KeypadMinus,0x4e,0x4a,0x7b,0x4e,86,VK_SUBTRACT,0x6d,74,74,XK_KP_Subtract,0xffad,NumpadSubtract,KPSU,kp_subtract,0x47,0x4e
-KEY_KP4,75,ANSI_Keypad4,0x56,0x4b,0x6b,0x6b,92,VK_NUMPAD4,0x64,75,75,XK_KP_4,0xffb4,Numpad4,KP4,kp_4,0x5b,0x56
-KEY_KP5,76,ANSI_Keypad5,0x57,0x4c,0x73,0x73,93,VK_NUMPAD5,0x65,76,76,XK_KP_5,0xffb5,Numpad5,KP5,kp_5,0x5c,0x57
-KEY_KP6,77,ANSI_Keypad6,0x58,0x4d,0x74,0x74,94,VK_NUMPAD6,0x66,77,77,XK_KP_6,0xffb6,Numpad6,KP6,kp_6,0x5d,0x58
-KEY_KPPLUS,78,ANSI_KeypadPlus,0x45,0x4e,0x79,0x7c,87,VK_ADD,0x6b,78,78,XK_KP_Add,0xffab,NumpadAdd,KPAD,kp_add,0x7d,0x45
-KEY_KP1,79,ANSI_Keypad1,0x53,0x4f,0x69,0x69,89,VK_NUMPAD1,0x61,79,79,XK_KP_1,0xffb1,Numpad1,KP1,kp_1,0x70,0x53
-KEY_KP2,80,ANSI_Keypad2,0x54,0x50,0x72,0x72,90,VK_NUMPAD2,0x62,80,80,XK_KP_2,0xffb2,Numpad2,KP2,kp_2,0x71,0x54
-KEY_KP3,81,ANSI_Keypad3,0x55,0x51,0x7a,0x7a,91,VK_NUMPAD3,0x63,81,81,XK_KP_3,0xffb3,Numpad3,KP3,kp_3,0x72,0x55
-KEY_KP0,82,ANSI_Keypad0,0x52,0x52,0x70,0x70,98,VK_NUMPAD0,0x60,82,82,XK_KP_0,0xffb0,Numpad0,KP0,kp_0,0x5e,0x52
-KEY_KPDOT,83,ANSI_KeypadDecimal,0x41,0x53,0x71,0x71,99,VK_DECIMAL,0x6e,83,83,XK_KP_Decimal,0xffae,NumpadDecimal,KPDL,kp_decimal,0x32,0x41
-KEY_KPDOT,83,ANSI_KeypadDecimal,0x41,0x53,0x71,0x71,99,VK_DECIMAL,0x6e,83,83,XK_KP_Decimal,0xffae,NumpadDecimal,KPDC,kp_decimal,0x32,0x41
-,84,,,0x54,,,,,,,,,,,,,,
-KEY_ZENKAKUHANKAKU,85,,,0x76,0x5f,,148,,,,,,,Lang5,HZTG,,,
-KEY_102ND,86,,,0x56,0x61,0x13,100,VK_OEM_102,0xe2,86,86,,,IntlBackslash,LSGT,less,0x7c,
-KEY_F11,87,F11,0x67,0x57,0x78,0x56,68,VK_F11,0x7a,87,87,XK_F11,0xffc8,F11,FK11,f11,0x09,0x67
-KEY_F12,88,F12,0x6f,0x58,0x07,0x5e,69,VK_F12,0x7b,88,88,XK_F12,0xffc9,F12,FK12,f12,0x0b,0x6f
-KEY_RO,89,JIS_Underscore,0x5e,0x73,0x51,,135,,,,,,,IntlRo,AB11,ro,,
-KEY_KATAKANA,90,,,0x78,0x63,,146,VK_KANA,0x15,,,,,Katakana,KATA,,,
-KEY_KATAKANA,90,,,0x78,0x63,,146,VK_KANA,0x15,,,,,Lang3,KATA,,,
-KEY_HIRAGANA,91,,,0x77,0x62,0x87,147,,,,,,,Hiragana,HIRA,hiragana,,
-KEY_HIRAGANA,91,,,0x77,0x62,0x87,147,,,,,,,Lang4,HIRA,hiragana,,
-KEY_HENKAN,92,,,0x79,0x64,0x86,138,,,,,,,Convert,HENK,henkan,,
-KEY_KATAKANAHIRAGANA,93,,,0x70,0x13,0x87,136,,,0xc8,0xc8,,,KanaMode,HKTG,katakanahiragana,,
-KEY_MUHENKAN,94,,,0x7b,0x67,0x85,139,,,,,,,NonConvert,NFER,muhenkan,,
-KEY_MUHENKAN,94,,,0x7b,0x67,0x85,139,,,,,,,NonConvert,MUHE,muhenkan,,
-KEY_KPJPCOMMA,95,JIS_KeypadComma,0x5f,0x5c,0x27,,140,,,,,XK_KP_Separator,0xffac,,KPSP,,,
-KEY_KPJPCOMMA,95,JIS_KeypadComma,0x5f,0x5c,0x27,,140,,,,,XK_KP_Separator,0xffac,,JPCM,,,
-KEY_KPENTER,96,ANSI_KeypadEnter,0x4c,0xe01c,0xe05a,0x79,88,,,0x64,0x64,XK_KP_Enter,0xff8d,NumpadEnter,KPEN,kp_enter,0x5a,0x4c
-KEY_RIGHTCTRL,97,RightControl,0x3e,0xe01d,0xe014,0x58,228,VK_RCONTROL,0xa3,0x65,0x65,XK_Control_R,0xffe4,ControlRight,RCTL,ctrl_r,0x4c,0x7d
-KEY_KPSLASH,98,ANSI_KeypadDivide,0x4b,0xe035,0xe04a,0x4a,84,VK_DIVIDE,0x6f,0x68,0x68,XK_KP_Divide,0xffaf,NumpadDivide,KPDV,kp_divide,0x2e,0x4b
-KEY_SYSRQ,99,,,0x54,0x7f,0x57,70,VK_SNAPSHOT,0x2c,0x67,0x67,XK_Sys_Req,0xff15,PrintScreen,PRSC,print,0x16,0x69
-KEY_SYSRQ,99,,,0x54,0x7f,0x57,70,VK_SNAPSHOT,0x2c,0x67,0x67,XK_Sys_Req,0xff15,PrintScreen,SYRQ,sysrq,0x16,0x69
-KEY_RIGHTALT,100,RightOption,0x3d,0xe038,0xe011,0x39,230,VK_RMENU,0xa5,0x69,0x69,XK_Alt_R,0xffea,AltRight,ALGR,alt_r,0x0d,0x7c
-KEY_RIGHTALT,100,RightOption,0x3d,0xe038,0xe011,0x39,230,VK_RMENU,0xa5,0x69,0x69,XK_Alt_R,0xffea,AltRight,RALT,alt_r,0x0d,0x7c
-KEY_LINEFEED,101,,,0x5b,,,,,,,,,,,LNFD,lf,0x6f,
-KEY_HOME,102,Home,0x73,0xe047,0xe06c,0x6e,74,VK_HOME,0x24,0x59,0x59,XK_Home,0xff50,Home,HOME,home,0x34,0x73
-KEY_UP,103,UpArrow,0x7e,0xe048,0xe075,0x63,82,VK_UP,0x26,0x5a,0x5a,XK_Up,0xff52,ArrowUp,UP,up,0x14,0x3e
-KEY_PAGEUP,104,PageUp,0x74,0xe049,0xe07d,0x6f,75,VK_PRIOR,0x21,0x5b,0x5b,XK_Page_Up,0xff55,PageUp,PGUP,pgup,0x60,0x74
-KEY_LEFT,105,LeftArrow,0x7b,0xe04b,0xe06b,0x61,80,VK_LEFT,0x25,0x5c,0x5c,XK_Left,0xff51,ArrowLeft,LEFT,left,0x18,0x3b
-KEY_RIGHT,106,RightArrow,0x7c,0xe04d,0xe074,0x6a,79,VK_RIGHT,0x27,0x5e,0x5e,XK_Right,0xff53,ArrowRight,RGHT,right,0x1c,0x3c
-KEY_END,107,End,0x77,0xe04f,0xe069,0x65,77,VK_END,0x23,0x5f,0x5f,XK_End,0xff57,End,END,end,0x4a,0x77
-KEY_DOWN,108,DownArrow,0x7d,0xe050,0xe072,0x60,81,VK_DOWN,0x28,0x60,0x60,XK_Down,0xff54,ArrowDown,DOWN,down,0x1b,0x3d
-KEY_PAGEDOWN,109,PageDown,0x79,0xe051,0xe07a,0x6d,78,VK_NEXT,0x22,0x61,0x61,XK_Page_Down,0xff56,PageDown,PGDN,pgdn,0x7b,0x79
-KEY_INSERT,110,,,0xe052,0xe070,0x67,73,VK_INSERT,0x2d,0x62,0x62,XK_Insert,0xff63,Insert,INS,insert,0x2c,0x72
-KEY_DELETE,111,ForwardDelete,0x75,0xe053,0xe071,0x64,76,VK_DELETE,0x2e,0x63,0x63,XK_Delete,0xffff,Delete,DEL,delete,0x42,0x75
-KEY_DELETE,111,ForwardDelete,0x75,0xe053,0xe071,0x64,76,VK_DELETE,0x2e,0x63,0x63,XK_Delete,0xffff,Delete,DELE,,0x42,0x75
-KEY_MACRO,112,,,0xe06f,0xe06f,0x8e,,,,,,,,,I120,,,
-KEY_MUTE,113,Mute,0x4a,0xe020,0xe023,0x9c,127,VK_VOLUME_MUTE,0xad,,,,,AudioVolumeMute,MUTE,audiomute,,
-KEY_MUTE,113,Mute,0x4a,0xe020,0xe023,0x9c,239,VK_VOLUME_MUTE,0xad,,,,,AudioVolumeMute,MUTE,audiomute,,
-KEY_VOLUMEDOWN,114,VolumeDown,0x49,0xe02e,0xe021,0x9d,129,VK_VOLUME_DOWN,0xae,,,,,AudioVolumeDown,VOL-,volumedown,,
-KEY_VOLUMEDOWN,114,VolumeDown,0x49,0xe02e,0xe021,0x9d,238,VK_VOLUME_DOWN,0xae,,,,,AudioVolumeDown,VOL-,volumedown,,
-KEY_VOLUMEUP,115,VolumeUp,0x48,0xe030,0xe032,0x95,128,VK_VOLUME_UP,0xaf,,,,,AudioVolumeUp,VOL+,volumeup,,
-KEY_VOLUMEUP,115,VolumeUp,0x48,0xe030,0xe032,0x95,237,VK_VOLUME_UP,0xaf,,,,,AudioVolumeUp,VOL+,volumeup,,
-KEY_POWER,116,,,0xe05e,0xe037,,102,,,,,,,Power,POWR,power,,0x7f7f
-KEY_KPEQUAL,117,ANSI_KeypadEquals,0x51,0x59,0x0f,,103,,,0x76,0x76,XK_KP_Equal,0xffbd,NumpadEqual,KPEQ,kp_equals,0x2d,0x51
-KEY_KPPLUSMINUS,118,,,0xe04e,0xe079,,,,,,,,,,I126,,,
-KEY_PAUSE,119,,,0xe046,0xe077,0x62,72,VK_PAUSE,0x013,0x66,0x66,XK_Pause,0xff13,Pause,PAUS,pause,0x15,0x71
-KEY_SCALE,120,,,0xe00b,,,,,,,,,,,I128,,,
-KEY_KPCOMMA,121,,,0x7e,0x6d,,133,VK_SEPARATOR??,0x6c,,,,,NumpadComma,KPCO,kp_comma,,
-KEY_KPCOMMA,121,,,0x7e,0x6d,,133,VK_SEPARATOR??,0x6c,,,,,NumpadComma,I129,,,
-KEY_HANGEUL,122,JIS_Kana,0x68,0x72,,,144,VK_HANGEUL,0x15,,0x71,,,Lang1,HNGL,,,
-KEY_HANJA,123,JIS_Eisu,0x66,0x71,,,145,VK_HANJA,0x19,,0x72,,,Lang2,HJCV,,,
-KEY_YEN,124,JIS_Yen,0x5d,0x7d,0x6a,0x5d,137,,,0x7d,0x7d,,,IntlYen,AE13,yen,,
-KEY_LEFTMETA,125,Command,0x37,0xe05b,0xe01f,0x8b,227,VK_LWIN,0x5b,0x6b,0x6b,XK_Meta_L,0xffe7,MetaLeft,LMTA,meta_l,0x78,0x37
-KEY_LEFTMETA,125,Command,0x37,0xe05b,0xe01f,0x8b,227,VK_LWIN,0x5b,0x6b,0x6b,XK_Meta_L,0xffe7,MetaLeft,LWIN,meta_l,0x78,0x37
-KEY_RIGHTMETA,126,RightCommand,0x36,0xe05c,0xe027,0x8c,231,VK_RWIN,0x5c,0x6c,0x6c,XK_Meta_R,0xffe8,MetaRight,RMTA,meta_r,0x7a,0x37
-KEY_RIGHTMETA,126,RightCommand,0x36,0xe05c,0xe027,0x8c,231,VK_RWIN,0x5c,0x6c,0x6c,XK_Meta_R,0xffe8,MetaRight,RWIN,meta_r,0x7a,0x37
-KEY_COMPOSE,127,,0x6e,0xe05d,0xe02f,0x8d,101,VK_APPS,0x5d,0x6d,0x6d,,,ContextMenu,MENU,compose,0x43,
-KEY_COMPOSE,127,,0x6e,0xe05d,0xe02f,0x8d,101,VK_APPS,0x5d,0x6d,0x6d,,,ContextMenu,COMP,compose,0x43,
-KEY_STOP,128,,,0xe068,0xe028,0x0a,120,VK_BROWSER_STOP,0xa9,,,,,BrowserStop,STOP,stop,0x01,
-KEY_STOP,128,,,0xe068,0xe028,0x0a,243,VK_BROWSER_STOP,0xa9,,,,,BrowserStop,STOP,stop,0x01,
-KEY_AGAIN,129,,,0xe005,,0x0b,121,,,,,,,Again,AGAI,again,0x03,
-KEY_PROPS,130,,,0xe006,,0x0c,,,,,,,,Props,PROP,props,0x19,
-KEY_UNDO,131,,,0xe007,,0x10,122,,,,,,,Undo,UNDO,undo,0x1a,
-KEY_FRONT,132,,,0xe00c,,,119,,,,,,,,FRNT,front,0x31,
-KEY_COPY,133,,,0xe078,,0x18,124,,,,,,,Copy,COPY,copy,0x33,
-KEY_OPEN,134,,,0x64,,0x20,116,,,,,,,Open,OPEN,open,0x48,
-KEY_PASTE,135,,,0x65,,0x28,125,,,,,,,Paste,PAST,paste,0x49,
-KEY_FIND,136,,,0xe041,,0x30,126,,,,,,,Find,FIND,find,0x5f,
-KEY_FIND,136,,,0xe041,,0x30,244,,,,,,,Find,FIND,find,0x5f,
-KEY_CUT,137,,,0xe03c,,0x38,123,,,,,,,Cut,CUT,cut,0x61,
-KEY_HELP,138,Help,0x72,0xe075,,0x09,117,VK_HELP,0x2f,,,XK_Help,0xff6a,Help,HELP,help,0x76,
-KEY_MENU,139,,,0xe01e,,0x91,118,,,,,,,,I147,menu,,
-KEY_CALC,140,,,0xe021,0xe02b,0xa3,251,,,,,,,LaunchApp2,I148,calculator,,
-KEY_SETUP,141,,,0x66,,,,,,,,,,,I149,,,
-KEY_SLEEP,142,,,0xe05f,0xe03f,,248,VK_SLEEP,0x5f,,,,,Sleep,I150,sleep,,
-KEY_WAKEUP,143,,,0xe063,0xe05e,,,,,,,,,WakeUp,I151,wake,,
-KEY_FILE,144,,,0x67,,,,,,,,,,,I152,,,
-KEY_SENDFILE,145,,,0x68,,,,,,,,,,,I153,,,
-KEY_DELETEFILE,146,,,0x69,,,,,,,,,,,I154,,,
-KEY_XFER,147,,,0xe013,,0xa2,,,,,,,,,XFER,,,
-KEY_XFER,147,,,0xe013,,0xa2,,,,,,,,,I155,,,
-KEY_PROG1,148,,,0xe01f,,0xa0,,,,,,,,,I156,,,
-KEY_PROG2,149,,,0xe017,,0xa1,,,,,,,,,I157,,,
-KEY_WWW,150,,,0xe002,,,240,,,,,,,,I158,,,
-KEY_MSDOS,151,,,0x6a,,,,,,,,,,,I159,,,
-KEY_SCREENLOCK,152,,,0xe012,,0x96,249,,,,,,,,I160,,,
-KEY_DIRECTION,153,,,0x6b,,,,,,,,,,,I161,,,
-KEY_CYCLEWINDOWS,154,,,0xe026,,0x9b,,,,,,,,,I162,,,
-KEY_MAIL,155,,,0xe06c,0xe048,,,,,,,,,LaunchMail,I163,mail,,
-KEY_BOOKMARKS,156,,,0xe066,0xe018,,,,,,,,,BrowserFavorites,I164,ac_bookmarks,,
-KEY_COMPUTER,157,,,0xe06b,0xe040,,,,,,,,,LaunchApp1,I165,computer,,
-KEY_BACK,158,,,0xe06a,0xe038,,241,VK_BROWSER_BACK,0xa6,,,,,BrowserBack,I166,ac_back,,
-KEY_FORWARD,159,,,0xe069,0xe030,,242,VK_BROWSER_FORWARD,0xa7,,,,,BrowserForward,I167,ac_forward,,
-KEY_CLOSECD,160,,,0xe023,,0x9a,,,,,,,,,I168,,,
-KEY_EJECTCD,161,,,0x6c,,,236,,,,,,,,I169,,,
-KEY_EJECTCLOSECD,162,,,0xe07d,,,,,,,,,,Eject,I170,,,
-KEY_NEXTSONG,163,,,0xe019,0xe04d,0x93,235,VK_MEDIA_NEXT_TRACK,0xb0,,,,,MediaTrackNext,I171,audionext,,
-KEY_PLAYPAUSE,164,,,0xe022,0xe034,,232,VK_MEDIA_PLAY_PAUSE,0xb3,,,,,MediaPlayPause,I172,audioplay,,
-KEY_PREVIOUSSONG,165,,,0xe010,0xe015,0x94,234,VK_MEDIA_PREV_TRACK,0xb1,,,,,MediaTrackPrevious,I173,audioprev,,
-KEY_STOPCD,166,,,0xe024,0xe03b,0x98,233,VK_MEDIA_STOP,0xb2,,,,,MediaStop,I174,audiostop,,
-KEY_RECORD,167,,,0xe031,,0x9e,,,,,,,,,I175,,,
-KEY_REWIND,168,,,0xe018,,0x9f,,,,,,,,,I176,,,
-KEY_PHONE,169,,,0x63,,,,,,,,,,,I177,,,
-KEY_ISO,170,ISO_Section,0xa,,,,,,,,,,,,I178,,,
-KEY_CONFIG,171,,,0xe001,,,,,,,,,,,I179,,,
-KEY_HOMEPAGE,172,,,0xe032,0xe03a,0x97,,VK_BROWSER_HOME,0xac,,,,,BrowserHome,I180,ac_home,,
-KEY_REFRESH,173,,,0xe067,0xe020,,250,VK_BROWSER_REFRESH,0xa8,,,,,BrowserRefresh,I181,ac_refresh,,
-KEY_EXIT,174,,,,,,,,,,,,,,I182,,,
-KEY_MOVE,175,,,,,,,,,,,,,,I183,,,
-KEY_EDIT,176,,,0xe008,,,247,,,,,,,,I184,,,
-KEY_SCROLLUP,177,,,0x75,,,245,,,,,,,,I185,,,
-KEY_SCROLLDOWN,178,,,0xe00f,,,246,,,,,,,,I186,,,
-KEY_KPLEFTPAREN,179,,,0xe076,,,182,,,,,,,NumpadParenLeft,I187,,,
-KEY_KPRIGHTPAREN,180,,,0xe07b,,,183,,,,,,,NumpadParenRight,I188,,,
-KEY_NEW,181,,,0xe009,,,,,,,,,,,I189,,,
-KEY_REDO,182,,,0xe00a,,,,,,,,,,,I190,,,
-KEY_F13,183,F13,0x69,0x5d,0x2f,0x7f,104,VK_F13,0x7c,0x6e,0x6e,,,F13,FK13,,,0x69
-KEY_F14,184,F14,0x6b,0x5e,0x37,0x80,105,VK_F14,0x7d,0x6f,0x6f,,,F14,FK14,,,0x6b
-KEY_F15,185,F15,0x71,0x5f,0x3f,0x81,106,VK_F15,0x7e,0x70,0x70,,,F15,FK15,,,0x71
-KEY_F16,186,F16,0x6a,0x55,,0x82,107,VK_F16,0x7f,0x71,0x71,,,F16,FK16,,,
-KEY_F17,187,F17,0x40,0xe003,,0x83,108,VK_F17,0x80,0x72,0x72,,,F17,FK17,,,
-KEY_F18,188,F18,0x4f,0xe077,,,109,VK_F18,0x81,,,,,F18,FK18,,,
-KEY_F19,189,F19,0x50,0xe004,,,110,VK_F19,0x82,,,,,F19,FK19,,,
-KEY_F20,190,F20,0x5a,0x5a,,,111,VK_F20,0x83,,,,,F20,FK20,,,
-KEY_F21,191,,,0x74,,,112,VK_F21,0x84,,,,,F21,FK21,,,
-KEY_F22,192,,,0xe079,,,113,VK_F22,0x85,,,,,F22,FK22,,,
-KEY_F23,193,,,0x6d,,,114,VK_F23,0x86,,,,,F23,FK23,,,
-KEY_F24,194,,,0x6f,,,115,VK_F24,0x87,,,,,F24,FK24,,,
-,195,,,0xe015,,,,,,,,,,,,,,
-,196,,,0xe016,,,,,,,,,,,,,,
-,197,,,0xe01a,,,,,,,,,,,,,,
-,198,,,0xe01b,,,,,,,,,,,,,,
-,199,,,0xe027,,,,,,,,,,,,,,
-KEY_PLAYCD,200,,,0xe028,,,,,,,,,,,I208,,,
-KEY_PAUSECD,201,,,0xe029,,,,,,,,,,,I209,,,
-KEY_PROG3,202,,,0xe02b,,,,,,,,,,,I210,,,
-KEY_PROG4,203,,,0xe02c,,,,,,,,,,,I211,,,
-KEY_DASHBOARD,204,,,0xe02d,,,,,,,,,,,I212,,,
-KEY_SUSPEND,205,,,0xe025,,,,,,,,,,Suspend,I213,,,
-KEY_CLOSE,206,,,0xe02f,,,,,,,,,,,I214,,,
-KEY_PLAY,207,,,0xe033,,,,VK_PLAY,0xfa,,,,,,I215,,,
-KEY_FASTFORWARD,208,,,0xe034,,,,,,,,,,,I216,,,
-KEY_BASSBOOST,209,,,0xe036,,,,,,,,,,,I217,,,
-KEY_PRINT,210,,,0xe039,,,,VK_PRINT,0x2a,,,,,,I218,,,
-KEY_HP,211,,,0xe03a,,,,,,,,,,,I219,,,
-KEY_CAMERA,212,,,0xe03b,,,,,,,,,,,I220,,,
-KEY_SOUND,213,,,0xe03d,,,,,,,,,,,I221,,,
-KEY_QUESTION,214,,,0xe03e,,,,,,,,,,,I222,,,
-KEY_EMAIL,215,,,0xe03f,,,,VK_LAUNCH_MAIL,0xb4,,,,,,I223,,,
-KEY_CHAT,216,,,0xe040,,,,,,,,,,,I224,,,
-KEY_SEARCH,217,,,0xe065,0xe010,,,VK_BROWSER_SEARCH,0xaa,,,,,BrowserSearch,I225,,,
-KEY_CONNECT,218,,,0xe042,,,,,,,,,,,I226,,,
-KEY_FINANCE,219,,,0xe043,,,,,,,,,,,I227,,,
-KEY_SPORT,220,,,0xe044,,,,,,,,,,,I228,,,
-KEY_SHOP,221,,,0xe045,,,,,,,,,,,I229,,,
-KEY_ALTERASE,222,,,0xe014,,,,,,,,,,,I230,,,
-KEY_CANCEL,223,,,0xe04a,,,,,,,,,,,I231,,,
-KEY_BRIGHTNESSDOWN,224,,,0xe04c,,,,,,,,,,,I232,,,
-KEY_BRIGHTNESSUP,225,,,0xe054,,,,,,,,,,,I233,,,
-KEY_MEDIA,226,,,0xe06d,0xe050,,,,,,,,,MediaSelect,I234,mediaselect,,
-KEY_SWITCHVIDEOMODE,227,,,0xe056,,,,,,,,,,,I235,,,
-KEY_KBDILLUMTOGGLE,228,,,0xe057,,,,,,,,,,,I236,,,
-KEY_KBDILLUMDOWN,229,,,0xe058,,,,,,,,,,,I237,,,
-KEY_KBDILLUMUP,230,,,0xe059,,,,,,,,,,,I238,,,
-KEY_SEND,231,,,0xe05a,,,,,,,,,,,I239,,,
-KEY_REPLY,232,,,0xe064,,,,,,,,,,,I240,,,
-KEY_FORWARDMAIL,233,,,0xe00e,,,,,,,,,,,I241,,,
-KEY_SAVE,234,,,0xe055,,,,,,,,,,,I242,,,
-KEY_DOCUMENTS,235,,,0xe070,,,,,,,,,,,I243,,,
-KEY_BATTERY,236,,,0xe071,,,,,,,,,,,I244,,,
-KEY_BLUETOOTH,237,,,0xe072,,,,,,,,,,,I245,,,
-KEY_WLAN,238,,,0xe073,,,,,,,,,,,I246,,,
-KEY_UWB,239,,,0xe074,,,,,,,,,,,I247,,,
-KEY_UNKNOWN,240,,,,,,,,,,,,,,I248,,,
-KEY_VIDEO_NEXT,241,,,,,,,,,,,,,,I249,,,
-KEY_VIDEO_PREV,242,,,,,,,,,,,,,,I250,,,
-KEY_BRIGHTNESS_CYCLE,243,,,,,,,,,,,,,,I251,,,
-KEY_BRIGHTNESS_ZERO,244,,,,,,,,,,,,,,I252,,,
-KEY_DISPLAY_OFF,245,,,,,,,,,,,,,,I253,,,
-KEY_WIMAX,246,,,,,,,,,,,,,,,,,
-,247,,,,,,,,,,,,,,,,,
-,248,,,,,,,,,,,,,,,,,
-,249,,,,,,,,,,,,,,,,,
-,250,,,,,,,,,,,,,,,,,
-,251,,,,,,,,,,,,,,,,,
-,252,,,,,,,,,,,,,,,,,
-,253,,,,,,,,,,,,,,,,,
-,254,,,,,,,,,,,,,,,,,
-,255,,,,0xe012,,,,,,,,,,,,,
-BTN_MISC,0x100,,,,,,,,,,,,,,,,,
-BTN_0,0x100,,,,,,,VK_LBUTTON,0x01,,,,,,,,,
-BTN_1,0x101,,,,,,,VK_RBUTTON,0x02,,,,,,,,,
-BTN_2,0x102,,,,,,,VK_MBUTTON,0x04,,,,,,,,,
-BTN_3,0x103,,,,,,,VK_XBUTTON1,0x05,,,,,,,,,
-BTN_4,0x104,,,,,,,VK_XBUTTON2,0x06,,,,,,,,,
-BTN_5,0x105,,,,,,,,,,,,,,,,,
-BTN_6,0x106,,,,,,,,,,,,,,,,,
-BTN_7,0x107,,,,,,,,,,,,,,,,,
-BTN_8,0x108,,,,,,,,,,,,,,,,,
-BTN_9,0x109,,,,,,,,,,,,,,,,,
-BTN_MOUSE,0x110,,,,,,,,,,,,,,,,,
-BTN_LEFT,0x110,,,,,,,,,,,,,,,,,
-BTN_RIGHT,0x111,,,,,,,,,,,,,,,,,
-BTN_MIDDLE,0x112,,,,,,,,,,,,,,,,,
-BTN_SIDE,0x113,,,,,,,,,,,,,,,,,
-BTN_EXTRA,0x114,,,,,,,,,,,,,,,,,
-BTN_FORWARD,0x115,,,,,,,,,,,,,,,,,
-BTN_BACK,0x116,,,,,,,,,,,,,,,,,
-BTN_TASK,0x117,,,,,,,,,,,,,,,,,
-BTN_JOYSTICK,0x120,,,,,,,,,,,,,,,,,
-BTN_TRIGGER,0x120,,,,,,,,,,,,,,,,,
-BTN_THUMB,0x121,,,,,,,,,,,,,,,,,
-BTN_THUMB2,0x122,,,,,,,,,,,,,,,,,
-BTN_TOP,0x123,,,,,,,,,,,,,,,,,
-BTN_TOP2,0x124,,,,,,,,,,,,,,,,,
-BTN_PINKIE,0x125,,,,,,,,,,,,,,,,,
-BTN_BASE,0x126,,,,,,,,,,,,,,,,,
-BTN_BASE2,0x127,,,,,,,,,,,,,,,,,
-BTN_BASE3,0x128,,,,,,,,,,,,,,,,,
-BTN_BASE4,0x129,,,,,,,,,,,,,,,,,
-BTN_BASE5,0x12a,,,,,,,,,,,,,,,,,
-BTN_BASE6,0x12b,,,,,,,,,,,,,,,,,
-BTN_DEAD,0x12f,,,,,,,,,,,,,,,,,
-BTN_GAMEPAD,0x130,,,,,,,,,,,,,,,,,
-BTN_A,0x130,,,,,,,,,,,,,,,,,
-BTN_B,0x131,,,,,,,,,,,,,,,,,
-BTN_C,0x132,,,,,,,,,,,,,,,,,
-BTN_X,0x133,,,,,,,,,,,,,,,,,
-BTN_Y,0x134,,,,,,,,,,,,,,,,,
-BTN_Z,0x135,,,,,,,,,,,,,,,,,
-BTN_TL,0x136,,,,,,,,,,,,,,,,,
-BTN_TR,0x137,,,,,,,,,,,,,,,,,
-BTN_TL2,0x138,,,,,,,,,,,,,,,,,
-BTN_TR2,0x139,,,,,,,,,,,,,,,,,
-BTN_SELECT,0x13a,,,,,,,,,,,,,,,,,
-BTN_START,0x13b,,,,,,,,,,,,,,,,,
-BTN_MODE,0x13c,,,,,,,,,,,,,,,,,
-BTN_THUMBL,0x13d,,,,,,,,,,,,,,,,,
-BTN_THUMBR,0x13e,,,,,,,,,,,,,,,,,
-BTN_DIGI,0x140,,,,,,,,,,,,,,,,,
-BTN_TOOL_PEN,0x140,,,,,,,,,,,,,,,,,
-BTN_TOOL_RUBBER,0x141,,,,,,,,,,,,,,,,,
-BTN_TOOL_BRUSH,0x142,,,,,,,,,,,,,,,,,
-BTN_TOOL_PENCIL,0x143,,,,,,,,,,,,,,,,,
-BTN_TOOL_AIRBRUSH,0x144,,,,,,,,,,,,,,,,,
-BTN_TOOL_FINGER,0x145,,,,,,,,,,,,,,,,,
-BTN_TOOL_MOUSE,0x146,,,,,,,,,,,,,,,,,
-BTN_TOOL_LENS,0x147,,,,,,,,,,,,,,,,,
-BTN_TOUCH,0x14a,,,,,,,,,,,,,,,,,
-BTN_STYLUS,0x14b,,,,,,,,,,,,,,,,,
-BTN_STYLUS2,0x14c,,,,,,,,,,,,,,,,,
-BTN_TOOL_DOUBLETAP,0x14d,,,,,,,,,,,,,,,,,
-BTN_TOOL_TRIPLETAP,0x14e,,,,,,,,,,,,,,,,,
-BTN_TOOL_QUADTAP,0x14f,,,,,,,,,,,,,,,,,
-BTN_WHEEL,0x150,,,,,,,,,,,,,,,,,
-BTN_GEAR_DOWN,0x150,,,,,,,,,,,,,,,,,
-BTN_GEAR_UP,0x151,,,,,,,,,,,,,,,,,
-KEY_OK,0x160,,,,,,,,,,,,,,,,,
-KEY_SELECT,0x161,,,,,,,VK_SELECT,0x29,,,XK_Select,0xff60,Select,SELE,,,
-KEY_GOTO,0x162,,,,,,,,,,,,,,,,,
-KEY_CLEAR,0x163,,,,,,,,,,,,,NumpadClear,CLR,,,
-KEY_POWER2,0x164,,,,,,,,,,,,,,,,,
-KEY_OPTION,0x165,,,,,,,,,,,,,,,,,
-KEY_INFO,0x166,,,,,,,,,,,,,,,,,
-KEY_TIME,0x167,,,,,,,,,,,,,,,,,
-KEY_VENDOR,0x168,,,,,,,,,,,,,,,,,
-KEY_ARCHIVE,0x169,,,,,,,,,,,,,,,,,
-KEY_PROGRAM,0x16a,,,,,,,,,,,,,,,,,
-KEY_CHANNEL,0x16b,,,,,,,,,,,,,,,,,
-KEY_FAVORITES,0x16c,,,,,,,VK_BROWSER_FAVOURITES,0xab,,,,,,,,,
-KEY_EPG,0x16d,,,,,,,,,,,,,,,,,
-KEY_PVR,0x16e,,,,,,,,,,,,,,,,,
-KEY_MHP,0x16f,,,,,,,,,,,,,,,,,
-KEY_LANGUAGE,0x170,,,,,,,,,,,,,,,,,
-KEY_TITLE,0x171,,,,,,,,,,,,,,,,,
-KEY_SUBTITLE,0x172,,,,,,,,,,,,,,,,,
-KEY_ANGLE,0x173,,,,,,,,,,,,,,,,,
-KEY_ZOOM,0x174,,,,,,,VK_ZOOM,0xfb,,,,,,,,,
-KEY_MODE,0x175,,,,,,,,,,,,,,,,,
-KEY_KEYBOARD,0x176,,,,,,,,,,,,,,,,,
-KEY_SCREEN,0x177,,,,,,,,,,,,,,,,,
-KEY_PC,0x178,,,,,,,,,,,,,,,,,
-KEY_TV,0x179,,,,,,,,,,,,,,,,,
-KEY_TV2,0x17a,,,,,,,,,,,,,,,,,
-KEY_VCR,0x17b,,,,,,,,,,,,,,,,,
-KEY_VCR2,0x17c,,,,,,,,,,,,,,,,,
-KEY_SAT,0x17d,,,,,,,,,,,,,,,,,
-KEY_SAT2,0x17e,,,,,,,,,,,,,,,,,
-KEY_CD,0x17f,,,,,,,,,,,,,,,,,
-KEY_TAPE,0x180,,,,,,,,,,,,,,,,,
-KEY_RADIO,0x181,,,,,,,,,,,,,,,,,
-KEY_TUNER,0x182,,,,,,,,,,,,,,,,,
-KEY_PLAYER,0x183,,,,,,,,,,,,,,,,,
-KEY_TEXT,0x184,,,,,,,,,,,,,,,,,
-KEY_DVD,0x185,,,,,,,,,,,,,,,,,
-KEY_AUX,0x186,,,,,,,,,,,,,,,,,
-KEY_MP3,0x187,,,,,,,,,,,,,,,,,
-KEY_AUDIO,0x188,,,,,,,,,,,,,,,,,
-KEY_VIDEO,0x189,,,,,,,,,,,,,,,,,
-KEY_DIRECTORY,0x18a,,,,,,,,,,,,,,,,,
-KEY_LIST,0x18b,,,,,,,,,,,,,,,,,
-KEY_MEMO,0x18c,,,,,,,,,,,,,,,,,
-KEY_CALENDAR,0x18d,,,,,,,,,,,,,,,,,
-KEY_RED,0x18e,,,,,,,,,,,,,,,,,
-KEY_GREEN,0x18f,,,,,,,,,,,,,,,,,
-KEY_YELLOW,0x190,,,,,,,,,,,,,,,,,
-KEY_BLUE,0x191,,,,,,,,,,,,,,,,,
-KEY_CHANNELUP,0x192,,,,,,,,,,,,,,,,,
-KEY_CHANNELDOWN,0x193,,,,,,,,,,,,,,,,,
-KEY_FIRST,0x194,,,,,,,,,,,,,,,,,
-KEY_LAST,0x195,,,,,,,,,,,,,,,,,
-KEY_AB,0x196,,,,,,,,,,,,,,,,,
-KEY_NEXT,0x197,,,,,,,,,,,,,,,,,
-KEY_RESTART,0x198,,,,,,,,,,,,,,,,,
-KEY_SLOW,0x199,,,,,,,,,,,,,,,,,
-KEY_SHUFFLE,0x19a,,,,,,,,,,,,,,,,,
-KEY_BREAK,0x19b,,,,,,,,,,,,,,BREA,,,
-KEY_BREAK,0x19b,,,,,,,,,,,,,,BRK,,,
-KEY_PREVIOUS,0x19c,,,,,,,,,,,,,,,,,
-KEY_DIGITS,0x19d,,,,,,,,,,,,,,,,,
-KEY_TEEN,0x19e,,,,,,,,,,,,,,,,,
-KEY_TWEN,0x19f,,,,,,,,,,,,,,,,,
-KEY_VIDEOPHONE,0x1a0,,,,,,,,,,,,,,,,,
-KEY_GAMES,0x1a1,,,,,,,,,,,,,,,,,
-KEY_ZOOMIN,0x1a2,,,,,,,,,,,,,,,,,
-KEY_ZOOMOUT,0x1a3,,,,,,,,,,,,,,,,,
-KEY_ZOOMRESET,0x1a4,,,,,,,,,,,,,,,,,
-KEY_WORDPROCESSOR,0x1a5,,,,,,,,,,,,,,,,,
-KEY_EDITOR,0x1a6,,,,,,,,,,,,,,,,,
-KEY_SPREADSHEET,0x1a7,,,,,,,,,,,,,,,,,
-KEY_GRAPHICSEDITOR,0x1a8,,,,,,,,,,,,,,,,,
-KEY_PRESENTATION,0x1a9,,,,,,,,,,,,,,,,,
-KEY_DATABASE,0x1aa,,,,,,,,,,,,,,,,,
-KEY_NEWS,0x1ab,,,,,,,,,,,,,,,,,
-KEY_VOICEMAIL,0x1ac,,,,,,,,,,,,,,,,,
-KEY_ADDRESSBOOK,0x1ad,,,,,,,,,,,,,,,,,
-KEY_MESSENGER,0x1ae,,,,,,,,,,,,,,,,,
-KEY_DISPLAYTOGGLE,0x1af,,,,,,,,,,,,,,,,,
-KEY_SPELLCHECK,0x1b0,,,,,,,,,,,,,,,,,
-KEY_LOGOFF,0x1b1,,,,,,,,,,,,,,,,,
-KEY_DOLLAR,0x1b2,,,,,,,,,,,,,,,,,
-KEY_EURO,0x1b3,,,,,,,,,,,,,,,,,
-KEY_FRAMEBACK,0x1b4,,,,,,,,,,,,,,,,,
-KEY_FRAMEFORWARD,0x1b5,,,,,,,,,,,,,,,,,
-KEY_CONTEXT_MENU,0x1b6,,,,,,,,,,,,,,,,,
-KEY_MEDIA_REPEAT,0x1b7,,,,,,,,,,,,,,,,,
-KEY_DEL_EOL,0x1c0,,,,,,,,,,,,,,,,,
-KEY_DEL_EOS,0x1c1,,,,,,,,,,,,,,,,,
-KEY_INS_LINE,0x1c2,,,,,,,,,,,,,,,,,
-KEY_DEL_LINE,0x1c3,,,,,,,,,,,,,,,,,
-KEY_FN,0x1d0,Function,0x3f,,,,,,,,,,,Fn,,,,
-KEY_FN_ESC,0x1d1,,,,,,,,,,,,,,,,,
-KEY_FN_F1,0x1d2,,,,,,,,,,,,,,,,,
-KEY_FN_F2,0x1d3,,,,,,,,,,,,,,,,,
-KEY_FN_F3,0x1d4,,,,,,,,,,,,,,,,,
-KEY_FN_F4,0x1d5,,,,,,,,,,,,,,,,,
-KEY_FN_F5,0x1d6,,,,,,,,,,,,,,,,,
-KEY_FN_F6,0x1d7,,,,,,,,,,,,,,,,,
-KEY_FN_F7,0x1d8,,,,,,,,,,,,,,,,,
-KEY_FN_F8,0x1d9,,,,,,,,,,,,,,,,,
-KEY_FN_F9,0x1da,,,,,,,,,,,,,,,,,
-KEY_FN_F10,0x1db,,,,,,,,,,,,,,,,,
-KEY_FN_F11,0x1dc,,,,,,,,,,,,,,,,,
-KEY_FN_F12,0x1dd,,,,,,,,,,,,,,,,,
-KEY_FN_1,0x1de,,,,,,,,,,,,,,,,,
-KEY_FN_2,0x1df,,,,,,,,,,,,,,,,,
-KEY_FN_D,0x1e0,,,,,,,,,,,,,,,,,
-KEY_FN_E,0x1e1,,,,,,,,,,,,,,,,,
-KEY_FN_F,0x1e2,,,,,,,,,,,,,,,,,
-KEY_FN_S,0x1e3,,,,,,,,,,,,,,,,,
-KEY_FN_B,0x1e4,,,,,,,,,,,,,,,,,
-KEY_BRL_DOT1,0x1f1,,,,,,,,,,,,,,,,,
-KEY_BRL_DOT2,0x1f2,,,,,,,,,,,,,,,,,
-KEY_BRL_DOT3,0x1f3,,,,,,,,,,,,,,,,,
-KEY_BRL_DOT4,0x1f4,,,,,,,,,,,,,,,,,
-KEY_BRL_DOT5,0x1f5,,,,,,,,,,,,,,,,,
-KEY_BRL_DOT6,0x1f6,,,,,,,,,,,,,,,,,
-KEY_BRL_DOT7,0x1f7,,,,,,,,,,,,,,,,,
-KEY_BRL_DOT8,0x1f8,,,,,,,,,,,,,,,,,
-KEY_BRL_DOT9,0x1f9,,,,,,,,,,,,,,,,,
-KEY_BRL_DOT10,0x1fa,,,,,,,,,,,,,,,,,
-KEY_NUMERIC_0,0x200,,,,,,,,,,,,,,,,,
-KEY_NUMERIC_1,0x201,,,,,,,,,,,,,,,,,
-KEY_NUMERIC_2,0x202,,,,,,,,,,,,,,,,,
-KEY_NUMERIC_3,0x203,,,,,,,,,,,,,,,,,
-KEY_NUMERIC_4,0x204,,,,,,,,,,,,,,,,,
-KEY_NUMERIC_5,0x205,,,,,,,,,,,,,,,,,
-KEY_NUMERIC_6,0x206,,,,,,,,,,,,,,,,,
-KEY_NUMERIC_7,0x207,,,,,,,,,,,,,,,,,
-KEY_NUMERIC_8,0x208,,,,,,,,,,,,,,,,,
-KEY_NUMERIC_9,0x209,,,,,,,,,,,,,,,,,
-KEY_NUMERIC_STAR,0x20a,,,,,,,,,,,,,NumpadStar,,,,
-KEY_NUMERIC_POUND,0x20b,,,,,,,,,,,,,NumpadHash,,,,
-KEY_RFKILL,0x20c,,,,,,,,,,,,,,,,,

keycodemapdb/meson.build

@@ -1 +0,0 @@
-project('keycodemapdb')

keycodemapdb/tests/.gitignore

@@ -1,11 +0,0 @@
-osx2win32.*
-osx2win32_name.*
-osx2xkb.*
-osx2xkb_name.*
-html2win32.*
-html2win32_name.*
-osx.*
-osx_name.*
-stdc
-stdc++
-node_modules/

keycodemapdb/tests/Makefile

@@ -1,150 +0,0 @@
-TESTS := stdc stdc++ python2 python3 javascript
-
-check: $(TESTS)
-	@set -e; for fn in $(TESTS); do \
-		./$$fn; \
-		echo $$fn: OK; \
-	done
-	@echo Done.
-
-GEN := ../tools/keymap-gen
-DATA := ../data/keymaps.csv
-SOURCES := $(GEN) $(DATA)
-
-.DELETE_ON_ERROR:
-
-stdc: stdc.c osx2win32.h osx2win32.c osx2win32_name.h osx2win32_name.c \
-             osx2xkb.h osx2xkb.c osx2xkb_name.h osx2xkb_name.c \
-             html2win32.h html2win32.c html2win32_name.h html2win32_name.c \
-             osx.h osx.c osx_name.h osx_name.c
-	$(CC) -Wall -o $@ $(filter %.c, $^)
-osx2win32.c: $(SOURCES)
-	$(GEN) --lang stdc code-map $(DATA) osx win32 > $@
-osx2win32.h: $(SOURCES)
-	$(GEN) --lang stdc-header code-map $(DATA) osx win32 > $@
-osx2win32_name.c: $(SOURCES)
-	$(GEN) --lang stdc name-map $(DATA) osx win32 > $@
-osx2win32_name.h: $(SOURCES)
-	$(GEN) --lang stdc-header name-map $(DATA) osx win32 > $@
-osx2xkb.c: $(SOURCES)
-	$(GEN) --lang stdc code-map $(DATA) osx xkb > $@
-osx2xkb.h: $(SOURCES)
-	$(GEN) --lang stdc-header code-map $(DATA) osx xkb > $@
-osx2xkb_name.c: $(SOURCES)
-	$(GEN) --lang stdc name-map $(DATA) osx xkb > $@
-osx2xkb_name.h: $(SOURCES)
-	$(GEN) --lang stdc-header name-map $(DATA) osx xkb > $@
-html2win32.c: $(SOURCES)
-	$(GEN) --lang stdc code-map $(DATA) html win32 > $@
-html2win32.h: $(SOURCES)
-	$(GEN) --lang stdc-header code-map $(DATA) html win32 > $@
-html2win32_name.c: $(SOURCES)
-	$(GEN) --lang stdc name-map $(DATA) html win32 > $@
-html2win32_name.h: $(SOURCES)
-	$(GEN) --lang stdc-header name-map $(DATA) html win32 > $@
-osx.c: $(SOURCES)
-	$(GEN) --lang stdc code-table $(DATA) osx > $@
-osx.h: $(SOURCES)
-	$(GEN) --lang stdc-header code-table $(DATA) osx > $@
-osx_name.c: $(SOURCES)
-	$(GEN) --lang stdc name-table $(DATA) osx > $@
-osx_name.h: $(SOURCES)
-	$(GEN) --lang stdc-header name-table $(DATA) osx > $@
-
-stdc++: stdc++.cc osx2win32.hh osx2win32.cc osx2win32_name.hh osx2win32_name.cc \
-             osx2xkb.hh osx2xkb.cc osx2xkb_name.hh osx2xkb_name.cc \
-             html2win32.hh html2win32.cc html2win32_name.hh html2win32_name.cc \
-             osx.hh osx.cc osx_name.hh osx_name.cc
-	$(CXX) -Wall -std=c++11 -o $@ $(filter %.cc, $^)
-osx2win32.cc: $(SOURCES)
-	$(GEN) --lang stdc++ code-map $(DATA) osx win32 > $@
-osx2win32.hh: $(SOURCES)
-	$(GEN) --lang stdc++-header code-map $(DATA) osx win32 > $@
-osx2win32_name.cc: $(SOURCES)
-	$(GEN) --lang stdc++ name-map $(DATA) osx win32 > $@
-osx2win32_name.hh: $(SOURCES)
-	$(GEN) --lang stdc++-header name-map $(DATA) osx win32 > $@
-osx2xkb.cc: $(SOURCES)
-	$(GEN) --lang stdc++ code-map $(DATA) osx xkb > $@
-osx2xkb.hh: $(SOURCES)
-	$(GEN) --lang stdc++-header code-map $(DATA) osx xkb > $@
-osx2xkb_name.cc: $(SOURCES)
-	$(GEN) --lang stdc++ name-map $(DATA) osx xkb > $@
-osx2xkb_name.hh: $(SOURCES)
-	$(GEN) --lang stdc++-header name-map $(DATA) osx xkb > $@
-html2win32.cc: $(SOURCES)
-	$(GEN) --lang stdc++ code-map $(DATA) html win32 > $@
-html2win32.hh: $(SOURCES)
-	$(GEN) --lang stdc++-header code-map $(DATA) html win32 > $@
-html2win32_name.cc: $(SOURCES)
-	$(GEN) --lang stdc++ name-map $(DATA) html win32 > $@
-html2win32_name.hh: $(SOURCES)
-	$(GEN) --lang stdc++-header name-map $(DATA) html win32 > $@
-osx.cc: $(SOURCES)
-	$(GEN) --lang stdc++ code-table $(DATA) osx > $@
-osx.hh: $(SOURCES)
-	$(GEN) --lang stdc++-header code-table $(DATA) osx > $@
-osx_name.cc: $(SOURCES)
-	$(GEN) --lang stdc++ name-table $(DATA) osx > $@
-osx_name.hh: $(SOURCES)
-	$(GEN) --lang stdc++-header name-table $(DATA) osx > $@
-
-python2: osx2win32.py osx2win32_name.py \
-         osx2xkb.py osx2xkb_name.py \
-         html2win32.py html2win32_name.py \
-         osx.py osx_name.py
-osx2win32.py: $(SOURCES)
-	$(GEN) --lang python2 code-map $(DATA) osx win32 > $@
-osx2win32_name.py: $(SOURCES)
-	$(GEN) --lang python2 name-map $(DATA) osx win32 > $@
-osx2xkb.py: $(SOURCES)
-	$(GEN) --lang python2 code-map $(DATA) osx xkb > $@
-osx2xkb_name.py: $(SOURCES)
-	$(GEN) --lang python2 name-map $(DATA) osx xkb > $@
-html2win32.py: $(SOURCES)
-	$(GEN) --lang python2 code-map $(DATA) html win32 > $@
-html2win32_name.py: $(SOURCES)
-	$(GEN) --lang python2 name-map $(DATA) html win32 > $@
-osx.py: $(SOURCES)
-	$(GEN) --lang python2 code-table $(DATA) osx > $@
-osx_name.py: $(SOURCES)
-	$(GEN) --lang python2 name-table $(DATA) osx > $@
-
-javascript: node_modules/babel-core \
-            node_modules/babel-plugin-transform-es2015-modules-commonjs \
-            osx2win32.js osx2win32_name.js \
-            osx2xkb.js osx2xkb_name.js \
-            html2win32.js html2win32_name.js \
-            osx.js osx_name.js
-node_modules/babel-core:
-	npm install babel-core
-node_modules/babel-plugin-transform-es2015-modules-commonjs:
-	npm install babel-plugin-transform-es2015-modules-commonjs
-osx2win32.js: $(SOURCES)
-	$(GEN) --lang js code-map $(DATA) osx win32 > $@
-osx2win32_name.js: $(SOURCES)
-	$(GEN) --lang js name-map $(DATA) osx win32 > $@
-osx2xkb.js: $(SOURCES)
-	$(GEN) --lang js code-map $(DATA) osx xkb > $@
-osx2xkb_name.js: $(SOURCES)
-	$(GEN) --lang js name-map $(DATA) osx xkb > $@
-html2win32.js: $(SOURCES)
-	$(GEN) --lang js code-map $(DATA) html win32 > $@
-html2win32_name.js: $(SOURCES)
-	$(GEN) --lang js name-map $(DATA) html win32 > $@
-osx.js: $(SOURCES)
-	$(GEN) --lang js code-table $(DATA) osx > $@
-osx_name.js: $(SOURCES)
-	$(GEN) --lang js name-table $(DATA) osx > $@
-
-clean:
-	rm -rf node_modules
-	rm -f osx2win32.*
-	rm -f osx2win32_name.*
-	rm -f osx2xkb.*
-	rm -f osx2xkb_name.*
-	rm -f html2win32.*
-	rm -f html2win32_name.*
-	rm -f osx.*
-	rm -f osx_name.*
-	rm -f stdc stdc++

keycodemapdb/tests/javascript

@@ -1,53 +0,0 @@
-#!/usr/bin/env node
-/*
- * Keycode Map Generator JavaScript Tests
- *
- * Copyright 2017 Pierre Ossman for Cendio AB
- *
- * This file is dual license under the terms of the GPLv2 or later
- * and 3-clause BSD licenses.
- */
-
-"use strict";
-
-var assert = require('assert');
-var babel = require('babel-core');
-var fs = require('fs');
-
-function include(fn) {
-  var options = {
-    plugins: ["transform-es2015-modules-commonjs"]
-  };
-
-  var code = babel.transformFileSync(fn, options).code;
-  fs.writeFileSync("." + fn + "_nodejs.js", code);
-  var imp = require("./." + fn + "_nodejs.js");
-  fs.unlinkSync("./." + fn + "_nodejs.js");
-
-  return imp
-}
-
-var code_map_osx_to_win32 = include("osx2win32.js").default;
-var name_map_osx_to_win32 = include("osx2win32_name.js").default;
-
-var code_map_osx_to_xkb = include("osx2xkb.js").default;
-var name_map_osx_to_xkb = include("osx2xkb_name.js").default;
-
-var code_map_html_to_win32 = include("html2win32.js").default;
-var name_map_html_to_win32 = include("html2win32_name.js").default;
-
-var code_table_osx = include("osx.js").default;
-var name_table_osx = include("osx_name.js").default;
-
-assert.equal(code_map_osx_to_win32[0x1d], 0x30);
-assert.equal(name_map_osx_to_win32[0x1d], "VK_0");
-
-assert.equal(code_map_osx_to_xkb[0x1d], "AE10");
-assert.equal(name_map_osx_to_xkb[0x1d], "AE10");
-
-assert.equal(code_map_html_to_win32["ControlLeft"], 0x11);
-assert.equal(name_map_html_to_win32["ControlLeft"], "VK_CONTROL");
-
-assert.equal(code_table_osx[0x1d], 0x3b);
-assert.equal(name_table_osx[0x1d], "Control");
-

keycodemapdb/tests/python2

@@ -1,3 +0,0 @@
-#!/bin/sh
-
-python ./test.py

keycodemapdb/tests/python3

@@ -1,3 +0,0 @@
-#!/bin/sh
-
-python3 ./test.py

keycodemapdb/tests/stdc++.cc

@@ -1,40 +0,0 @@
-/*
- * Keycode Map Generator C++ Tests
- *
- * Copyright 2017 Pierre Ossman for Cendio AB
- *
- * This file is dual license under the terms of the GPLv2 or later
- * and 3-clause BSD licenses.
- */
-
-#include <assert.h>
-#include <string.h>
-
-#include "osx2win32.hh"
-#include "osx2win32_name.hh"
-
-#include "osx2xkb.hh"
-#include "osx2xkb_name.hh"
-
-#include "html2win32.hh"
-#include "html2win32_name.hh"
-
-#include "osx.hh"
-#include "osx_name.hh"
-
-int main(int argc, char** argv)
-{
-	assert(code_map_osx_to_win32[0x1d] == 0x30);
-	assert(strcmp(name_map_osx_to_win32[0x1d], "VK_0") == 0);
-
-	assert(strcmp(code_map_osx_to_xkb[0x1d], "AE10") == 0);
-	assert(strcmp(name_map_osx_to_xkb[0x1d], "AE10") == 0);
-
-	assert(code_map_html_to_win32.at("ControlLeft") == 0x11);
-	assert(strcmp(name_map_html_to_win32.at("ControlLeft"), "VK_CONTROL") == 0);
-
-	assert(code_table_osx[0x1d] == 0x3b);
-	assert(strcmp(name_table_osx[0x1d], "Control") == 0);
-
-	return 0;
-}

keycodemapdb/tests/stdc.c

@@ -1,64 +0,0 @@
-/*
- * Keycode Map Generator C Tests
- *
- * Copyright 2017 Pierre Ossman for Cendio AB
- *
- * This file is dual license under the terms of the GPLv2 or later
- * and 3-clause BSD licenses.
- */
-
-#include <assert.h>
-#include <string.h>
-
-#include "osx2win32.h"
-#include "osx2win32_name.h"
-
-#include "osx2xkb.h"
-#include "osx2xkb_name.h"
-
-#include "html2win32.h"
-#include "html2win32_name.h"
-
-#include "osx.h"
-#include "osx_name.h"
-
-#define ARRAY_SIZE(a) (sizeof(a)/sizeof(a[0]))
-
-int main(int argc, char** argv)
-{
-	unsigned i;
-
-	assert(code_map_osx_to_win32_len == ARRAY_SIZE(code_map_osx_to_win32));
-	assert(code_map_osx_to_win32[0x1d] == 0x30);
-	assert(name_map_osx_to_win32_len == ARRAY_SIZE(name_map_osx_to_win32));
-	assert(strcmp(name_map_osx_to_win32[0x1d], "VK_0") == 0);
-
-	assert(code_map_osx_to_xkb_len == ARRAY_SIZE(code_map_osx_to_xkb));
-	assert(strcmp(code_map_osx_to_xkb[0x1d], "AE10") == 0);
-	assert(name_map_osx_to_xkb_len == ARRAY_SIZE(name_map_osx_to_xkb));
-	assert(strcmp(name_map_osx_to_xkb[0x1d], "AE10") == 0);
-
-	assert(code_map_html_to_win32_len == ARRAY_SIZE(code_map_html_to_win32));
-	for (i = 0;i < code_map_html_to_win32_len;i++) {
-		if (strcmp(code_map_html_to_win32[i].from, "ControlLeft") == 0) {
-			assert(code_map_html_to_win32[i].to == 0x11);
-			break;
-		}
-	}
-	assert(i != code_map_html_to_win32_len);
-	assert(name_map_html_to_win32_len == ARRAY_SIZE(name_map_html_to_win32));
-	for (i = 0;i < name_map_html_to_win32_len;i++) {
-		if (strcmp(name_map_html_to_win32[i].from, "ControlLeft") == 0) {
-			assert(strcmp(name_map_html_to_win32[i].to, "VK_CONTROL") == 0);
-			break;
-		}
-	}
-	assert(i != name_map_html_to_win32_len);
-
-	assert(code_table_osx_len == ARRAY_SIZE(code_table_osx));
-	assert(code_table_osx[0x1d] == 0x3b);
-	assert(name_table_osx_len == ARRAY_SIZE(name_table_osx));
-	assert(strcmp(name_table_osx[0x1d], "Control") == 0);
-
-	return 0;
-}

keycodemapdb/tests/test.py

@@ -1,30 +0,0 @@
-# Keycode Map Generator Python Tests
-#
-# Copyright 2017 Pierre Ossman for Cendio AB
-#
-# This file is dual license under the terms of the GPLv2 or later
-# and 3-clause BSD licenses.
-
-import osx2win32
-import osx2win32_name
-
-import osx2xkb
-import osx2xkb_name
-
-import html2win32
-import html2win32_name
-
-import osx
-import osx_name
-
-assert osx2win32.code_map_osx_to_win32[0x1d] == 0x30
-assert osx2win32_name.name_map_osx_to_win32[0x1d] == "VK_0"
-
-assert osx2xkb.code_map_osx_to_xkb[0x1d] == "AE10"
-assert osx2xkb_name.name_map_osx_to_xkb[0x1d] == "AE10"
-
-assert html2win32.code_map_html_to_win32["ControlLeft"] == 0x11
-assert html2win32_name.name_map_html_to_win32["ControlLeft"] == "VK_CONTROL"
-
-assert osx.code_table_osx[0x1d] == 0x3b;
-assert osx_name.name_table_osx[0x1d] == "Control";

keycodemapdb/thirdparty/LICENSE-argparse.txt

@@ -1,20 +0,0 @@
-argparse is (c) 2006-2009 Steven J. Bethard <steven.bethard@gmail.com>.
-
-The argparse module was contributed to Python as of Python 2.7 and thus
-was licensed under the Python license. Same license applies to all files in
-the argparse package project.
-
-For details about the Python License, please see doc/Python-License.txt.
-
-History
--------
-
-Before (and including) argparse 1.1, the argparse package was licensed under
-Apache License v2.0.
-
-After argparse 1.1, all project files from the argparse project were deleted
-due to license compatibility issues between Apache License 2.0 and GNU GPL v2.
-
-The project repository then had a clean start with some files taken from
-Python 2.7.1, so definitely all files are under Python License now.
-