Support RDMA devices without Implicit ODP using mlockall()

UPD: Seems it won't work because ibv_reg_mr() takes a permissions argument
and doesn't allow more permissions than allowed by the kernel for memory
mappings. So the only way to register all memory is probably to iterate
over /proc/PID/maps... :)

Mellanox docs mention that older MLNX_OFED emulated ODP, so maybe it's
still possible to use it, but it's not confirmed.

CMakeLists.txt

@@ -2,6 +2,6 @@ cmake_minimum_required(VERSION 2.8)
 
 project(vitastor)
 
-set(VERSION "0.6.8")
+set(VERSION "0.6.12")
 
 add_subdirectory(src)

README-ru.md

@@ -51,14 +51,15 @@ Vitastor на данный момент находится в статусе п
 - Базовая поддержка OpenStack: драйвер Cinder, патчи для Nova и libvirt
 - Слияние снапшотов (vitastor-cli {snap-rm,flatten,merge})
 - Консольный интерфейс для управления образами (vitastor-cli {ls,create,modify})
+- Плагин для Proxmox
 
 ## Планы развития
 
-- Поддержка удаления снапшотов (слияния слоёв)
 - Более корректные скрипты разметки дисков и автоматического запуска OSD
 - Другие инструменты администрирования
-- Плагины для OpenNebula, Proxmox и других облачных систем
+- Плагины для OpenNebula и других облачных систем
 - iSCSI-прокси
+- Упрощённый NFS прокси
 - Более быстрое переключение при отказах
 - Фоновая проверка целостности без контрольных сумм (сверка реплик)
 - Контрольные суммы
@@ -403,12 +404,21 @@ Vitastor с однопоточной NBD прокси на том же стен
   в этом случае пострадает.
 - Быстрая сеть, минимум 10 гбит/с
 - Для наилучшей производительности нужно отключить энергосбережение CPU: `cpupower idle-set -D 0 && cpupower frequency-set -g performance`.
-- Пропишите нужные вам значения вверху файлов `/usr/lib/vitastor/mon/make-units.sh` и `/usr/lib/vitastor/mon/make-osd.sh`.
-- Создайте юниты systemd для etcd и мониторов: `/usr/lib/vitastor/mon/make-units.sh`
-- Создайте юниты для OSD: `/usr/lib/vitastor/mon/make-osd.sh /dev/disk/by-partuuid/XXX [/dev/disk/by-partuuid/YYY ...]`
-- Вы можете поменять параметры OSD в юнитах systemd. Смысл некоторых параметров:
+- На хостах мониторов:
+  - Пропишите нужные вам значения в файле `/usr/lib/vitastor/mon/make-units.sh`
+  - Создайте юниты systemd для etcd и мониторов: `/usr/lib/vitastor/mon/make-units.sh`
+- Пропишите etcd_address и osd_network в `/etc/vitastor/vitastor.conf`. Например:
+  ```
+  {
+    "etcd_address": ["10.200.1.10:2379","10.200.1.11:2379","10.200.1.12:2379"],
+    "osd_network": "10.200.1.0/24"
+  }
+  ```
+- Создайте юниты systemd для OSD: `/usr/lib/vitastor/make-osd.sh /dev/disk/by-partuuid/XXX [/dev/disk/by-partuuid/YYY ...]`
+- Вы можете менять параметры OSD в юнитах systemd или в `vitastor.conf`. Смысл некоторых параметров:
   - `disable_data_fsync 1` - отключает fsync, используется с SSD с конденсаторами.
   - `immediate_commit all` - используется с SSD с конденсаторами.
+    Внимание: если установлено, также нужно установить его в то же значение в etcd в /vitastor/config/global
   - `disable_device_lock 1` - отключает блокировку файла устройства, нужно, только если вы запускаете
     несколько OSD на одном блочном устройстве.
   - `flusher_count 256` - "flusher" - микропоток, удаляющий старые данные из журнала.
@@ -528,6 +538,75 @@ for i in ./???-*.yaml; do kubectl apply -f $i; done
 
 После этого вы сможете создавать PersistentVolume. Пример смотрите в файле [csi/deploy/example-pvc.yaml](csi/deploy/example-pvc.yaml).
 
+### OpenStack
+
+Чтобы подключить Vitastor к OpenStack:
+
+- Установите пакеты vitastor-client, libvirt и QEMU из DEB или RPM репозитория Vitastor
+- Примените патч `patches/nova-21.diff` или `patches/nova-23.diff` к вашей инсталляции Nova.
+  nova-21.diff подходит для Nova 21-22, nova-23.diff подходит для Nova 23-24.
+- Скопируйте `patches/cinder-vitastor.py` в инсталляцию Cinder как `cinder/volume/drivers/vitastor.py`
+- Создайте тип томов в cinder.conf (см. ниже)
+- Обязательно заблокируйте доступ от виртуальных машин к сети Vitastor (OSD и etcd), т.к. Vitastor (пока) не поддерживает аутентификацию
+- Перезапустите Cinder и Nova
+
+Пример конфигурации Cinder:
+
+```
+[DEFAULT]
+enabled_backends = lvmdriver-1, vitastor-testcluster
+# ...
+
+[vitastor-testcluster]
+volume_driver = cinder.volume.drivers.vitastor.VitastorDriver
+volume_backend_name = vitastor-testcluster
+image_volume_cache_enabled = True
+volume_clear = none
+vitastor_etcd_address = 192.168.7.2:2379
+vitastor_etcd_prefix =
+vitastor_config_path = /etc/vitastor/vitastor.conf
+vitastor_pool_id = 1
+image_upload_use_cinder_backend = True
+```
+
+Чтобы помещать в Vitastor Glance-образы, нужно использовать
+[https://docs.openstack.org/cinder/pike/admin/blockstorage-volume-backed-image.html](образы на основе томов Cinder),
+однако, поддержка этой функции ещё не проверялась.
+
+### Proxmox
+
+Чтобы подключить Vitastor к Proxmox Virtual Environment (поддерживаются версии 6.4 и 7.1):
+
+- Добавьте соответствующий Debian-репозиторий Vitastor в sources.list на хостах Proxmox
+  (buster для 6.4, bullseye для 7.1)
+- Установите пакеты vitastor-client, pve-qemu-kvm, pve-storage-vitastor (* или см. сноску) из репозитория Vitastor
+- Определите тип хранилища в `/etc/pve/storage.cfg` (см. ниже)
+- Обязательно заблокируйте доступ от виртуальных машин к сети Vitastor (OSD и etcd), т.к. Vitastor (пока) не поддерживает аутентификацию
+- Перезапустите демон Proxmox: `systemctl restart pvedaemon`
+
+Пример `/etc/pve/storage.cfg` (единственная обязательная опция - vitastor_pool, все остальные
+перечислены внизу для понимания значений по умолчанию):
+
+```
+vitastor: vitastor
+    # Пул, в который будут помещаться образы дисков
+    vitastor_pool testpool
+    # Путь к файлу конфигурации
+    vitastor_config_path /etc/vitastor/vitastor.conf
+    # Адрес(а) etcd, нужны, только если не указаны в vitastor.conf
+    vitastor_etcd_address 192.168.7.2:2379/v3
+    # Префикс ключей метаданных в etcd
+    vitastor_etcd_prefix /vitastor
+    # Префикс имён образов
+    vitastor_prefix pve/
+    # Монтировать образы через NBD прокси, через ядро (нужно только для контейнеров)
+    vitastor_nbd 0
+```
+
+\* Примечание: вместо установки пакета pve-storage-vitastor вы можете вручную скопировать файл
+[patches/PVE_VitastorPlugin.pm](patches/PVE_VitastorPlugin.pm) на хосты Proxmox как
+`/usr/share/perl5/PVE/Storage/Custom/VitastorPlugin.pm`.
+
 ## Известные проблемы
 
 - Запросы удаления объектов могут в данный момент приводить к "неполным" объектам в EC-пулах,

README.md

@@ -45,14 +45,15 @@ breaking changes in the future. However, the following is implemented:
 - Basic OpenStack support: Cinder driver, Nova and libvirt patches
 - Snapshot merge tool (vitastor-cli {snap-rm,flatten,merge})
 - Image management CLI (vitastor-cli {ls,create,modify})
+- Proxmox storage plugin
 
 ## Roadmap
 
-- Snapshot deletion (layer merge) support
 - Better OSD creation and auto-start tools
 - Other administrative tools
-- Plugins for OpenNebula, Proxmox and other cloud systems
+- Plugins for OpenNebula and other cloud systems
 - iSCSI proxy
+- Simplified NFS proxy
 - Faster failover
 - Scrubbing without checksums (verification of replicas)
 - Checksums
@@ -356,13 +357,21 @@ and calculate disk offsets almost by hand. This will be fixed in near future.
   with lazy fsync, but prepare for inferior single-thread latency.
 - Get a fast network (at least 10 Gbit/s).
 - Disable CPU powersaving: `cpupower idle-set -D 0 && cpupower frequency-set -g performance`.
-- Check `/usr/lib/vitastor/mon/make-units.sh` and `/usr/lib/vitastor/mon/make-osd.sh` and
-  put desired values into the variables at the top of these files.
-- Create systemd units for the monitor and etcd: `/usr/lib/vitastor/mon/make-units.sh`
+- On the monitor hosts:
+  - Edit variables at the top of `/usr/lib/vitastor/mon/make-units.sh` to desired values.
+  - Create systemd units for the monitor and etcd: `/usr/lib/vitastor/mon/make-units.sh`
+- Put etcd_address and osd_network into `/etc/vitastor/vitastor.conf`. Example:
+  ```
+  {
+    "etcd_address": ["10.200.1.10:2379","10.200.1.11:2379","10.200.1.12:2379"],
+    "osd_network": "10.200.1.0/24"
+  }
+  ```
 - Create systemd units for your OSDs: `/usr/lib/vitastor/mon/make-osd.sh /dev/disk/by-partuuid/XXX [/dev/disk/by-partuuid/YYY ...]`
-- You can edit the units and change OSD configuration. Notable configuration variables:
+- You can change OSD configuration in units or in `vitastor.conf`. Notable configuration variables:
   - `disable_data_fsync 1` - only safe with server-grade drives with capacitors.
   - `immediate_commit all` - use this if all your drives are server-grade.
+    If all OSDs have it set to all then you should also put the same value in etcd into /vitastor/config/global
   - `disable_device_lock 1` - only required if you run multiple OSDs on one block device.
   - `flusher_count 256` - flusher is a micro-thread that removes old data from the journal.
     You don't have to worry about this parameter anymore, 256 is enough.
@@ -478,6 +487,73 @@ for i in ./???-*.yaml; do kubectl apply -f $i; done
 
 After that you'll be able to create PersistentVolumes. See example in [csi/deploy/example-pvc.yaml](csi/deploy/example-pvc.yaml).
 
+### OpenStack
+
+To enable Vitastor support in an OpenStack installation:
+
+- Install vitastor-client, patched QEMU and libvirt packages from Vitastor DEB or RPM repository
+- Use `patches/nova-21.diff` or `patches/nova-23.diff` to patch your Nova installation.
+  Patch 21 fits Nova 21-22, patch 23 fits Nova 23-24.
+- Install `patches/cinder-vitastor.py` as `..../cinder/volume/drivers/vitastor.py`
+- Define a volume type in cinder.conf (see below)
+- Block network access from VMs to Vitastor network (to OSDs and etcd), because Vitastor doesn't support authentication (yet)
+- Restart Cinder and Nova
+
+Cinder volume type configuration example:
+
+```
+[DEFAULT]
+enabled_backends = lvmdriver-1, vitastor-testcluster
+# ...
+
+[vitastor-testcluster]
+volume_driver = cinder.volume.drivers.vitastor.VitastorDriver
+volume_backend_name = vitastor-testcluster
+image_volume_cache_enabled = True
+volume_clear = none
+vitastor_etcd_address = 192.168.7.2:2379
+vitastor_etcd_prefix =
+vitastor_config_path = /etc/vitastor/vitastor.conf
+vitastor_pool_id = 1
+image_upload_use_cinder_backend = True
+```
+
+To put Glance images in Vitastor, use [https://docs.openstack.org/cinder/pike/admin/blockstorage-volume-backed-image.html](volume-backed images),
+although the support has not been verified yet.
+
+### Proxmox
+
+To enable Vitastor support in Proxmox Virtual Environment (6.4 and 7.1 are supported):
+
+- Add the corresponding Vitastor Debian repository into sources.list on Proxmox hosts
+  (buster for 6.4, bullseye for 7.1)
+- Install vitastor-client, pve-qemu-kvm, pve-storage-vitastor (* or see note) packages from Vitastor repository
+- Define storage in `/etc/pve/storage.cfg` (see below)
+- Block network access from VMs to Vitastor network (to OSDs and etcd), because Vitastor doesn't support authentication (yet)
+- Restart pvedaemon: `systemctl restart pvedaemon`
+
+`/etc/pve/storage.cfg` example (the only required option is vitastor_pool, all others
+are listed below with their default values):
+
+```
+vitastor: vitastor
+    # pool to put new images into
+    vitastor_pool testpool
+    # path to the configuration file
+    vitastor_config_path /etc/vitastor/vitastor.conf
+    # etcd address(es), required only if missing in the configuration file
+    vitastor_etcd_address 192.168.7.2:2379/v3
+    # prefix for keys in etcd
+    vitastor_etcd_prefix /vitastor
+    # prefix for images
+    vitastor_prefix pve/
+    # use NBD mounter (only required for containers)
+    vitastor_nbd 0
+```
+
+\* Note: you can also manually copy [patches/PVE_VitastorPlugin.pm](patches/PVE_VitastorPlugin.pm) to Proxmox hosts
+as `/usr/share/perl5/PVE/Storage/Custom/VitastorPlugin.pm` instead of installing pve-storage-vitastor.
+
 ## Known Problems
 
 - Object deletion requests may currently lead to 'incomplete' objects in EC pools

csi/Makefile

@@ -1,4 +1,4 @@
-VERSION ?= v0.6.8
+VERSION ?= v0.6.12
 
 all: build push
 

csi/deploy/004-csi-nodeplugin.yaml

@@ -49,7 +49,7 @@ spec:
             capabilities:
               add: ["SYS_ADMIN"]
             allowPrivilegeEscalation: true
-          image: vitalif/vitastor-csi:v0.6.8
+          image: vitalif/vitastor-csi:v0.6.12
           args:
             - "--node=$(NODE_ID)"
             - "--endpoint=$(CSI_ENDPOINT)"

csi/deploy/007-csi-provisioner.yaml

@@ -116,7 +116,7 @@ spec:
             privileged: true
             capabilities:
               add: ["SYS_ADMIN"]
-          image: vitalif/vitastor-csi:v0.6.8
+          image: vitalif/vitastor-csi:v0.6.12
           args:
             - "--node=$(NODE_ID)"
             - "--endpoint=$(CSI_ENDPOINT)"

csi/src/config.go

@@ -5,7 +5,7 @@ package vitastor
 
 const (
     vitastorCSIDriverName    = "csi.vitastor.io"
-    vitastorCSIDriverVersion = "0.6.8"
+    vitastorCSIDriverVersion = "0.6.12"
 )
 
 // Config struct fills the parameters of request or user input

debian/changelog

@@ -1,4 +1,4 @@
-vitastor (0.6.8-1) unstable; urgency=medium
+vitastor (0.6.12-1) unstable; urgency=medium
 
   * RDMA support
   * Bugfixes

debian/control

@@ -9,7 +9,7 @@ Rules-Requires-Root: no
 
 Package: vitastor
 Architecture: amd64
-Depends: vitastor-osd, vitastor-mon, vitastor-client, vitastor-client-dev, vitastor-fio, vitastor-qemu
+Depends: vitastor-osd, vitastor-mon, vitastor-client, vitastor-client-dev, vitastor-fio
 Description: Vitastor, a fast software-defined clustered block storage
  Vitastor is a small, simple and fast clustered block storage (storage for VM drives),
  architecturally similar to Ceph which means strong consistency, primary-replication,
@@ -48,8 +48,8 @@ Depends: ${shlibs:Depends}, ${misc:Depends}, vitastor-client (= ${binary:Version
 Description: Vitastor, a fast software-defined clustered block storage - fio drivers
  Vitastor fio drivers for benchmarking.
 
-Package: vitastor-qemu
+Package: pve-storage-vitastor
 Architecture: amd64
-Depends: ${shlibs:Depends}, ${misc:Depends}, vitastor-client (= ${binary:Version}), qemu (= ${dep:qemu})
-Description: Vitastor, a fast software-defined clustered block storage - QEMU driver
- Vitastor QEMU block device driver.
+Depends: ${shlibs:Depends}, ${misc:Depends}, vitastor-client (= ${binary:Version})
+Description: Vitastor Proxmox Virtual Environment storage plugin
+ Vitastor storage plugin for Proxmox Virtual Environment.

debian/fio_version

@@ -0,0 +1 @@
+dep:fio=3.16-1

debian/libvirt.Dockerfile

@@ -0,0 +1,40 @@
+# Build patched libvirt for Debian Buster or Bullseye/Sid inside a container
+# cd ..; podman build --build-arg REL=bullseye -v `pwd`/packages:/root/packages -f debian/libvirt.Dockerfile .
+
+ARG REL=
+FROM debian:$REL
+ARG REL=
+
+WORKDIR /root
+
+RUN if [ "$REL" = "buster" -o "$REL" = "bullseye" ]; then \
+        echo "deb http://deb.debian.org/debian $REL-backports main" >> /etc/apt/sources.list; \
+        echo >> /etc/apt/preferences; \
+        echo 'Package: *' >> /etc/apt/preferences; \
+        echo "Pin: release a=$REL-backports" >> /etc/apt/preferences; \
+        echo 'Pin-Priority: 500' >> /etc/apt/preferences; \
+    fi; \
+    grep '^deb ' /etc/apt/sources.list | perl -pe 's/^deb/deb-src/' >> /etc/apt/sources.list; \
+    echo 'APT::Install-Recommends false;' >> /etc/apt/apt.conf; \
+    echo 'APT::Install-Suggests false;' >> /etc/apt/apt.conf
+
+RUN apt-get update; apt-get -y install devscripts
+RUN apt-get -y build-dep libvirt0
+RUN apt-get -y install libglusterfs-dev
+RUN apt-get --download-only source libvirt
+
+ADD patches/libvirt-5.0-vitastor.diff patches/libvirt-7.0-vitastor.diff patches/libvirt-7.5-vitastor.diff patches/libvirt-7.6-vitastor.diff /root
+RUN set -e; \
+    mkdir -p /root/packages/libvirt-$REL; \
+    rm -rf /root/packages/libvirt-$REL/*; \
+    cd /root/packages/libvirt-$REL; \
+    dpkg-source -x /root/libvirt*.dsc; \
+    D=$(ls -d libvirt-*/); \
+    V=$(ls -d libvirt-*/ | perl -pe 's/libvirt-(\d+\.\d+).*/$1/'); \
+    cp /root/libvirt-$V-vitastor.diff $D/debian/patches; \
+    echo libvirt-$V-vitastor.diff >> $D/debian/patches/series; \
+    cd $D; \
+    V=$(head -n1 debian/changelog | perl -pe 's/^.*\((.*?)(~bpo[\d\+]*)?(\+deb[u\d]+)?\).*$/$1/')+vitastor2; \
+    DEBEMAIL="Vitaliy Filippov <vitalif@yourcmc.ru>" dch -D $REL -v $V 'Add Vitastor support'; \
+    DEB_BUILD_OPTIONS=nocheck dpkg-buildpackage --jobs=auto -sa; \
+    rm -rf /root/packages/libvirt-$REL/$D

debian/patched-qemu.Dockerfile

@@ -7,11 +7,11 @@ ARG REL=
 
 WORKDIR /root
 
-RUN if [ "$REL" = "buster" ]; then \
-        echo 'deb http://deb.debian.org/debian buster-backports main' >> /etc/apt/sources.list; \
+RUN if [ "$REL" = "buster" -o "$REL" = "bullseye" ]; then \
+        echo "deb http://deb.debian.org/debian $REL-backports main" >> /etc/apt/sources.list; \
         echo >> /etc/apt/preferences; \
         echo 'Package: *' >> /etc/apt/preferences; \
-        echo 'Pin: release a=buster-backports' >> /etc/apt/preferences; \
+        echo "Pin: release a=$REL-backports" >> /etc/apt/preferences; \
         echo 'Pin-Priority: 500' >> /etc/apt/preferences; \
     fi; \
     grep '^deb ' /etc/apt/sources.list | perl -pe 's/^deb/deb-src/' >> /etc/apt/sources.list; \
@@ -21,28 +21,41 @@ RUN if [ "$REL" = "buster" ]; then \
 RUN apt-get update
 RUN apt-get -y install qemu fio liburing1 liburing-dev libgoogle-perftools-dev devscripts
 RUN apt-get -y build-dep qemu
-RUN apt-get -y build-dep fio
 # To build a custom version
 #RUN cp /root/packages/qemu-orig/* /root
 RUN apt-get --download-only source qemu
-RUN apt-get --download-only source fio
 
-ADD patches/qemu-5.0-vitastor.patch patches/qemu-5.1-vitastor.patch /root/vitastor/patches/
+ADD patches/qemu-5.0-vitastor.patch patches/qemu-5.1-vitastor.patch patches/qemu-6.1-vitastor.patch src/qemu_driver.c /root/vitastor/patches/
 RUN set -e; \
+    apt-get install -y wget; \
+    wget -q -O /etc/apt/trusted.gpg.d/vitastor.gpg https://vitastor.io/debian/pubkey.gpg; \
+    (echo deb http://vitastor.io/debian $REL main > /etc/apt/sources.list.d/vitastor.list); \
+    (echo "APT::Install-Recommends false;" > /etc/apt/apt.conf) && \
+    apt-get update; \
+    apt-get install -y vitastor-client vitastor-client-dev quilt; \
     mkdir -p /root/packages/qemu-$REL; \
     rm -rf /root/packages/qemu-$REL/*; \
     cd /root/packages/qemu-$REL; \
     dpkg-source -x /root/qemu*.dsc; \
-    if [ -d /root/packages/qemu-$REL/qemu-5.0 ]; then \
-        cp /root/vitastor/patches/qemu-5.0-vitastor.patch /root/packages/qemu-$REL/qemu-5.0/debian/patches; \
-        echo qemu-5.0-vitastor.patch >> /root/packages/qemu-$REL/qemu-5.0/debian/patches/series; \
+    if ls -d /root/packages/qemu-$REL/qemu-5.0*; then \
+        D=$(ls -d /root/packages/qemu-$REL/qemu-5.0*); \
+        cp /root/vitastor/patches/qemu-5.0-vitastor.patch $D/debian/patches; \
+        echo qemu-5.0-vitastor.patch >> $D/debian/patches/series; \
+    elif ls /root/packages/qemu-$REL/qemu-6.1*; then \
+        D=$(ls -d /root/packages/qemu-$REL/qemu-6.1*); \
+        cp /root/vitastor/patches/qemu-6.1-vitastor.patch $D/debian/patches; \
+        echo qemu-6.1-vitastor.patch >> $D/debian/patches/series; \
     else \
         cp /root/vitastor/patches/qemu-5.1-vitastor.patch /root/packages/qemu-$REL/qemu-*/debian/patches; \
         P=`ls -d /root/packages/qemu-$REL/qemu-*/debian/patches`; \
         echo qemu-5.1-vitastor.patch >> $P/series; \
     fi; \
     cd /root/packages/qemu-$REL/qemu-*/; \
+    quilt push -a; \
+    quilt add block/vitastor.c; \
+    cp /root/vitastor/patches/qemu_driver.c block/vitastor.c; \
+    quilt refresh; \
     V=$(head -n1 debian/changelog | perl -pe 's/^.*\((.*?)(~bpo[\d\+]*)?\).*$/$1/')+vitastor1; \
-    DEBFULLNAME="Vitaliy Filippov <vitalif@yourcmc.ru>" dch -D $REL -v $V 'Plug Vitastor block driver'; \
+    DEBEMAIL="Vitaliy Filippov <vitalif@yourcmc.ru>" dch -D $REL -v $V 'Plug Vitastor block driver'; \
     DEB_BUILD_OPTIONS=nocheck dpkg-buildpackage --jobs=auto -sa; \
     rm -rf /root/packages/qemu-$REL/qemu-*/

debian/pve-storage-vitastor.install

@@ -0,0 +1 @@
+patches/PVE_VitastorPlugin.pm usr/share/perl5/PVE/Storage/Custom/VitastorPlugin.pm

debian/raw.h

@@ -0,0 +1,19 @@
+/* Removed in Linux 5.14 */
+
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+#ifndef __LINUX_RAW_H
+#define __LINUX_RAW_H
+
+#include <linux/types.h>
+
+#define RAW_SETBIND	_IO( 0xac, 0 )
+#define RAW_GETBIND	_IO( 0xac, 1 )
+
+struct raw_config_request 
+{
+	int	raw_minor;
+	__u64	block_major;
+	__u64	block_minor;
+};
+
+#endif /* __LINUX_RAW_H */

debian/rules

@@ -6,5 +6,5 @@ export DH_VERBOSE = 1
 
 override_dh_installdeb:
 	cat debian/fio_version >> debian/vitastor-fio.substvars
-	cat debian/qemu_version >> debian/vitastor-qemu.substvars
+	[ -f debian/qemu_version ] && (cat debian/qemu_version >> debian/vitastor-qemu.substvars) || true
 	dh_installdeb

debian/vitastor-client.install

@@ -3,3 +3,4 @@ usr/bin/vitastor-cli
 usr/bin/vitastor-rm
 usr/bin/vitastor-nbd
 usr/lib/*/libvitastor*.so*
+mon/make-osd.sh /usr/lib/vitastor

debian/vitastor-osd.install

@@ -1,3 +1,2 @@
 usr/bin/vitastor-osd
 usr/bin/vitastor-dump-journal
-mon/make-osd.sh /usr/lib/vitastor

debian/vitastor-qemu.install

@@ -1 +0,0 @@
-usr/lib/*/qemu/*

debian/vitastor.Dockerfile

@@ -7,11 +7,11 @@ ARG REL=
 
 WORKDIR /root
 
-RUN if [ "$REL" = "buster" ]; then \
-        echo 'deb http://deb.debian.org/debian buster-backports main' >> /etc/apt/sources.list; \
+RUN if [ "$REL" = "buster" -o "$REL" = "bullseye" ]; then \
+        echo "deb http://deb.debian.org/debian $REL-backports main" >> /etc/apt/sources.list; \
         echo >> /etc/apt/preferences; \
         echo 'Package: *' >> /etc/apt/preferences; \
-        echo 'Pin: release a=buster-backports' >> /etc/apt/preferences; \
+        echo "Pin: release a=$REL-backports" >> /etc/apt/preferences; \
         echo 'Pin-Priority: 500' >> /etc/apt/preferences; \
     fi; \
     grep '^deb ' /etc/apt/sources.list | perl -pe 's/^deb/deb-src/' >> /etc/apt/sources.list; \
@@ -19,10 +19,8 @@ RUN if [ "$REL" = "buster" ]; then \
     echo 'APT::Install-Suggests false;' >> /etc/apt/apt.conf
 
 RUN apt-get update
-RUN apt-get -y install qemu fio liburing1 liburing-dev libgoogle-perftools-dev devscripts
-RUN apt-get -y build-dep qemu
+RUN apt-get -y install fio liburing1 liburing-dev libgoogle-perftools-dev devscripts
 RUN apt-get -y build-dep fio
-RUN apt-get --download-only source qemu
 RUN apt-get --download-only source fio
 RUN apt-get update && apt-get -y install libjerasure-dev cmake libibverbs-dev
 
@@ -32,37 +30,25 @@ RUN set -e -x; \
     cd /root/fio-build/; \
     rm -rf /root/fio-build/*; \
     dpkg-source -x /root/fio*.dsc; \
-    cd /root/packages/qemu-$REL/; \
-    rm -rf qemu*/; \
-    dpkg-source -x qemu*.dsc; \
-    cd /root/packages/qemu-$REL/qemu*/; \
-    debian/rules b/configure-stamp; \
-    cd b/qemu; \
-    make -j8 qapi/qapi-builtin-types.h; \
     mkdir -p /root/packages/vitastor-$REL; \
     rm -rf /root/packages/vitastor-$REL/*; \
     cd /root/packages/vitastor-$REL; \
-    cp -r /root/vitastor vitastor-0.6.8; \
-    ln -s /root/packages/qemu-$REL/qemu-*/ vitastor-0.6.8/qemu; \
-    ln -s /root/fio-build/fio-*/ vitastor-0.6.8/fio; \
-    cd vitastor-0.6.8; \
+    cp -r /root/vitastor vitastor-0.6.12; \
+    cd vitastor-0.6.12; \
+    ln -s /root/fio-build/fio-*/ ./fio; \
     FIO=$(head -n1 fio/debian/changelog | perl -pe 's/^.*\((.*?)\).*$/$1/'); \
-    QEMU=$(head -n1 qemu/debian/changelog | perl -pe 's/^.*\((.*?)\).*$/$1/'); \
-    sh copy-qemu-includes.sh; \
+    ls /usr/include/linux/raw.h || cp ./debian/raw.h /usr/include/linux/raw.h; \
     sh copy-fio-includes.sh; \
-    rm qemu fio; \
+    rm fio; \
     mkdir -p a b debian/patches; \
-    mv qemu-copy b/qemu; \
     mv fio-copy b/fio; \
-    diff -NaurpbB a b > debian/patches/qemu-fio-headers.patch || true; \
-    echo qemu-fio-headers.patch >> debian/patches/series; \
+    diff -NaurpbB a b > debian/patches/fio-headers.patch || true; \
+    echo fio-headers.patch >> debian/patches/series; \
     rm -rf a b; \
-    rm -rf /root/packages/qemu-$REL/qemu*/; \
     echo "dep:fio=$FIO" > debian/fio_version; \
-    echo "dep:qemu=$QEMU" > debian/qemu_version; \
     cd /root/packages/vitastor-$REL; \
-    tar --sort=name --mtime='2020-01-01' --owner=0 --group=0 --exclude=debian -cJf vitastor_0.6.8.orig.tar.xz vitastor-0.6.8; \
-    cd vitastor-0.6.8; \
+    tar --sort=name --mtime='2020-01-01' --owner=0 --group=0 --exclude=debian -cJf vitastor_0.6.12.orig.tar.xz vitastor-0.6.12; \
+    cd vitastor-0.6.12; \
     V=$(head -n1 debian/changelog | perl -pe 's/^.*\((.*?)\).*$/$1/'); \
     DEBFULLNAME="Vitaliy Filippov <vitalif@yourcmc.ru>" dch -D $REL -v "$V""$REL" "Rebuild for $REL"; \
     DEB_BUILD_OPTIONS=nocheck dpkg-buildpackage --jobs=auto -sa; \

docs/params/common.yml

@@ -0,0 +1,35 @@
+- name: config_path
+  type: string
+  default: "/etc/vitastor/vitastor.conf"
+  info: |
+    Path to the JSON configuration file. Configuration file is optional,
+    a non-existing configuration file does not prevent Vitastor from
+    running if required parameters are specified.
+  info_ru: |
+    Путь к файлу конфигурации в формате JSON. Файл конфигурации необязателен,
+    без него Vitastor тоже будет работать, если переданы необходимые параметры.
+- name: etcd_address
+  type: string or array of strings
+  type_ru: строка или массив строк
+  info: |
+    etcd connection endpoint(s). Multiple endpoints may be delimited by "," or
+    specified in a JSON array `["10.0.115.10:2379/v3","10.0.115.11:2379/v3"]`.
+    Note that https is not supported for etcd connections yet.
+  info_ru: |
+    Адрес(а) подключения к etcd. Несколько адресов могут разделяться запятой
+    или указываться в виде JSON-массива `["10.0.115.10:2379/v3","10.0.115.11:2379/v3"]`.
+- name: etcd_prefix
+  type: string
+  default: "/vitastor"
+  info: |
+    Prefix for all keys in etcd used by Vitastor. You can change prefix and, for
+    example, use a single etcd cluster for multiple Vitastor clusters.
+  info_ru: |
+    Префикс для ключей etcd, которые использует Vitastor. Вы можете задать другой
+    префикс, например, чтобы запустить несколько кластеров Vitastor с одним
+    кластером etcd.
+- name: log_level
+  type: int
+  default: 0
+  info: Log level. Raise if you want more verbose output.
+  info_ru: Уровень логгирования. Повысьте, если хотите более подробный вывод.

docs/params/layout-cluster.yml

@@ -0,0 +1,200 @@
+- name: block_size
+  type: int
+  default: 131072
+  info: |
+    Size of objects (data blocks) into which all physical and virtual drives are
+    subdivided in Vitastor. One of current main settings in Vitastor, affects
+    memory usage, write amplification and I/O load distribution effectiveness.
+
+    Recommended default block size is 128 KB for SSD and 4 MB for HDD. In fact,
+    it's possible to use 4 MB for SSD too - it will lower memory usage, but
+    may increase average WA and reduce linear performance.
+
+    OSDs with different block sizes (for example, SSD and SSD+HDD OSDs) can
+    currently coexist in one etcd instance only within separate Vitastor
+    clusters with different etcd_prefix'es.
+
+    Also block size can't be changed after OSD initialization without losing
+    data.
+
+    You must always specify block_size in etcd in /vitastor/config/global if
+    you change it so all clients can know about it.
+
+    OSD memory usage is roughly (SIZE / BLOCK * 68 bytes) which is roughly
+    544 MB per 1 TB of used disk space with the default 128 KB block size.
+  info_ru: |
+    Размер объектов (блоков данных), на которые делятся физические и виртуальные
+    диски в Vitastor. Одна из ключевых на данный момент настроек, влияет на
+    потребление памяти, объём избыточной записи (write amplification) и
+    эффективность распределения нагрузки по OSD.
+
+    Рекомендуемые по умолчанию размеры блока - 128 килобайт для SSD и 4
+    мегабайта для HDD. В принципе, для SSD можно тоже использовать 4 мегабайта,
+    это понизит использование памяти, но ухудшит распределение нагрузки и в
+    среднем увеличит WA.
+
+    OSD с разными размерами блока (например, SSD и SSD+HDD OSD) на данный
+    момент могут сосуществовать в рамках одного etcd только в виде двух независимых
+    кластеров Vitastor с разными etcd_prefix.
+
+    Также размер блока нельзя менять после инициализации OSD без потери данных.
+
+    Если вы меняете размер блока, обязательно прописывайте его в etcd в
+    /vitastor/config/global, дабы все клиенты его знали.
+
+    Потребление памяти OSD составляет примерно (РАЗМЕР / БЛОК * 68 байт),
+    т.е. примерно 544 МБ памяти на 1 ТБ занятого места на диске при
+    стандартном 128 КБ блоке.
+- name: bitmap_granularity
+  type: int
+  default: 4096
+  info: |
+    Required virtual disk write alignment ("sector size"). Must be a multiple
+    of disk_alignment. It's called bitmap granularity because Vitastor tracks
+    an allocation bitmap for each object containing 2 bits per each
+    (bitmap_granularity) bytes.
+
+    This parameter can't be changed after OSD initialization without losing
+    data. Also it's fixed for the whole Vitastor cluster i.e. two different
+    values can't be used in a single Vitastor cluster.
+
+    Clients MUST be aware of this parameter value, so put it into etcd key
+    /vitastor/config/global if you change it for any reason.
+  info_ru: |
+    Требуемое выравнивание записи на виртуальные диски (размер их "сектора").
+    Должен быть кратен disk_alignment. Называется гранулярностью битовой карты
+    потому, что Vitastor хранит битовую карту для каждого объекта, содержащую
+    по 2 бита на каждые (bitmap_granularity) байт.
+
+    Данный параметр нельзя менять после инициализации OSD без потери данных.
+    Также он фиксирован для всего кластера Vitastor, т.е. разные значения
+    не могут сосуществовать в одном кластере.
+
+    Клиенты ДОЛЖНЫ знать правильное значение этого параметра, так что если вы
+    его меняете, обязательно прописывайте изменённое значение в etcd в ключ
+    /vitastor/config/global.
+- name: immediate_commit
+  type: string
+  default: false
+  info: |
+    Another parameter which is really important for performance.
+
+    Desktop SSDs are very fast (100000+ iops) for simple random writes
+    without cache flush. However, they are really slow (only around 1000 iops)
+    if you try to fsync() each write, that is, when you want to guarantee that
+    each change gets immediately persisted to the physical media.
+
+    Server-grade SSDs with "Advanced/Enhanced Power Loss Protection" or with
+    "Supercapacitor-based Power Loss Protection", on the other hand, are equally
+    fast with and without fsync because their cache is protected from sudden
+    power loss by a built-in supercapacitor-based "UPS".
+
+    Some software-defined storage systems always fsync each write and thus are
+    really slow when used with desktop SSDs. Vitastor, however, can also
+    efficiently utilize desktop SSDs by postponing fsync until the client calls
+    it explicitly.
+
+    This is what this parameter regulates. When it's set to "all" the whole
+    Vitastor cluster commits each change to disks immediately and clients just
+    ignore fsyncs because they know for sure that they're unneeded. This reduces
+    the amount of network roundtrips performed by clients and improves
+    performance. So it's always better to use server grade SSDs with
+    supercapacitors even with Vitastor, especially given that they cost only
+    a bit more than desktop models.
+
+    There is also a common SATA SSD (and HDD too!) firmware bug (or feature)
+    that makes server SSDs which have supercapacitors slow with fsync. To check
+    if your SSDs are affected, compare benchmark results from `fio -name=test
+    -ioengine=libaio -direct=1 -bs=4k -rw=randwrite -iodepth=1` with and without
+    `-fsync=1`. Results should be the same. If fsync=1 result is worse you can
+    try to work around this bug by "disabling" drive write-back cache by running
+    `hdparm -W 0 /dev/sdXX` or `echo write through > /sys/block/sdXX/device/scsi_disk/*/cache_type`
+    (IMPORTANT: don't mistake it with `/sys/block/sdXX/queue/write_cache` - it's
+    unsafe to change by hand). The same may apply to newer HDDs with internal
+    SSD cache or "media-cache" - for example, a lot of Seagate EXOS drives have
+    it (they have internal SSD cache even though it's not stated in datasheets).
+
+    This parameter must be set both in etcd in /vitastor/config/global and in
+    OSD command line or configuration. Setting it to "all" or "small" requires
+    enabling disable_journal_fsync and disable_meta_fsync, setting it to "all"
+    also requires enabling disable_data_fsync.
+
+    TLDR: For optimal performance, set immediate_commit to "all" if you only use
+    SSDs with supercapacitor-based power loss protection (nonvolatile
+    write-through cache) for both data and journals in the whole Vitastor
+    cluster. Set it to "small" if you only use such SSDs for journals. Leave
+    empty if your drives have write-back cache.
+  info_ru: |
+    Ещё один важный для производительности параметр.
+
+    Модели SSD для настольных компьютеров очень быстрые (100000+ операций в
+    секунду) при простой случайной записи без сбросов кэша. Однако они очень
+    медленные (всего порядка 1000 iops), если вы пытаетесь сбрасывать кэш после
+    каждой записи, то есть, если вы пытаетесь гарантировать, что каждое
+    изменение физически записывается в энергонезависимую память.
+
+    С другой стороны, серверные SSD с конденсаторами - функцией, называемой
+    "Advanced/Enhanced Power Loss Protection" или просто "Supercapacitor-based
+    Power Loss Protection" - одинаково быстрые и со сбросом кэша, и без
+    него, потому что их кэш защищён от потери питания встроенным "источником
+    бесперебойного питания" на основе суперконденсаторов и на самом деле они
+    его никогда не сбрасывают.
+
+    Некоторые программные СХД всегда сбрасывают кэши дисков при каждой записи
+    и поэтому работают очень медленно с настольными SSD. Vitastor, однако, может
+    откладывать fsync до явного его вызова со стороны клиента и таким образом
+    эффективно утилизировать настольные SSD.
+
+    Данный параметр влияет как раз на это. Когда он установлен в значение "all",
+    весь кластер Vitastor мгновенно фиксирует каждое изменение на физические
+    носители и клиенты могут просто игнорировать запросы fsync, т.к. они точно
+    знают, что fsync-и не нужны. Это уменьшает число необходимых обращений к OSD
+    по сети и улучшает производительность. Поэтому даже с Vitastor лучше всегда
+    использовать только серверные модели SSD с суперконденсаторами, особенно
+    учитывая то, что стоят они ненамного дороже настольных.
+
+    Также в прошивках SATA SSD (и даже HDD!) очень часто встречается либо баг,
+    либо просто особенность логики, из-за которой серверные SSD, имеющие
+    конденсаторы и защиту от потери питания, всё равно медленно работают с
+    fsync. Чтобы понять, подвержены ли этой проблеме ваши SSD, сравните
+    результаты тестов `fio -name=test -ioengine=libaio -direct=1 -bs=4k
+    -rw=randwrite -iodepth=1` без и с опцией `-fsync=1`. Результаты должны
+    быть одинаковые. Если результат с `fsync=1` хуже, вы можете попробовать
+    обойти проблему, "отключив" кэш записи диска командой `hdparm -W 0 /dev/sdXX`
+    либо `echo write through > /sys/block/sdXX/device/scsi_disk/*/cache_type`
+    (ВАЖНО: не перепутайте с `/sys/block/sdXX/queue/write_cache` - этот параметр
+    менять руками небезопасно). Такая же проблема может встречаться и в новых
+    HDD-дисках с внутренним SSD или "медиа" кэшем - например, она встречается во
+    многих дисках Seagate EXOS (у них есть внутренний SSD-кэш, хотя это и не
+    указано в спецификациях).
+
+    Данный параметр нужно указывать и в etcd в /vitastor/config/global, и в
+    командной строке или конфигурации OSD. Значения "all" и "small" требуют
+    включения disable_journal_fsync и disable_meta_fsync, значение "all" также
+    требует включения disable_data_fsync.
+
+    Итого, вкратце: для оптимальной производительности установите
+    immediate_commit в значение "all", если вы используете в кластере только SSD
+    с суперконденсаторами и для данных, и для журналов. Если вы используете
+    такие SSD для всех журналов, но не для данных - можете установить параметр
+    в "small". Если и какие-то из дисков журналов имеют волатильный кэш записи -
+    оставьте параметр пустым.
+- name: client_dirty_limit
+  type: int
+  default: 33554432
+  info: |
+    Without immediate_commit=all this parameter sets the limit of "dirty"
+    (not committed by fsync) data allowed by the client before forcing an
+    additional fsync and committing the data. Also note that the client always
+    holds a copy of uncommitted data in memory so this setting also affects
+    RAM usage of clients.
+
+    This parameter doesn't affect OSDs themselves.
+  info_ru: |
+    При работе без immediate_commit=all - это лимит объёма "грязных" (не
+    зафиксированных fsync-ом) данных, при достижении которого клиент будет
+    принудительно вызывать fsync и фиксировать данные. Также стоит иметь в виду,
+    что в этом случае до момента fsync клиент хранит копию незафиксированных
+    данных в памяти, то есть, настройка влияет на потребление памяти клиентами.
+
+    Параметр не влияет на сами OSD.

docs/params/layout-osd.yml

@@ -0,0 +1,205 @@
+- name: data_device
+  type: string
+  info: |
+    Path to the block device to use for data. It's highly recommendded to use
+    stable paths for all device names: `/dev/disk/by-partuuid/xxx...` instead
+    of just `/dev/sda` or `/dev/nvme0n1` to not mess up after server restart.
+    Files can also be used instead of block devices, but this is implemented
+    only for testing purposes and not for production.
+  info_ru: |
+    Путь к диску (блочному устройству) для хранения данных. Крайне рекомендуется
+    использовать стабильные пути: `/dev/disk/by-partuuid/xxx...` вместо простых
+    `/dev/sda` или `/dev/nvme0n1`, чтобы пути не могли спутаться после
+    перезагрузки сервера. Также вместо блочных устройств можно указывать файлы,
+    но это реализовано только для тестирования, а не для боевой среды.
+- name: meta_device
+  type: string
+  info: |
+    Path to the block device to use for the metadata. Metadata must be on a fast
+    SSD or performance will suffer. If this option is skipped, `data_device` is
+    used for the metadata.
+  info_ru: |
+    Путь к диску метаданных. Метаданные должны располагаться на быстром
+    SSD-диске, иначе производительность пострадает. Если эта опция не указана,
+    для метаданных используется `data_device`.
+- name: journal_device
+  type: string
+  info: |
+    Path to the block device to use for the journal. Journal must be on a fast
+    SSD or performance will suffer. If this option is skipped, `meta_device` is
+    used for the journal, and if it's also empty, journal is put on
+    `data_device`. It's almost always fine to put metadata and journal on the
+    same device, in this case you only need to set `meta_device`.
+  info_ru: |
+    Путь к диску журнала. Журнал должен располагаться на быстром SSD-диске,
+    иначе производительность пострадает. Если эта опция не указана,
+    для журнала используется `meta_device`, если же пуста и она, журнал
+    располагается на `data_device`. Нормально располагать журнал и метаданные
+    на одном устройстве, в этом случае достаточно указать только `meta_device`.
+- name: journal_offset
+  type: int
+  default: 0
+  info: Offset on the device in bytes where the journal is stored.
+  info_ru: Смещение на устройстве в байтах, по которому располагается журнал.
+- name: journal_size
+  type: int
+  info: |
+    Journal size in bytes. Doesn't have to be large, 16-32 MB is usually fine.
+    By default, the whole journal device will be used for the journal. You must
+    set it to some value manually (or use make-osd.sh) if you colocate the
+    journal with data or metadata.
+  info_ru: |
+    Размер журнала в байтах. Большим быть не обязан, 16-32 МБ обычно достаточно.
+    По умолчанию для журнала используется всё устройство журнала. Если же вы
+    размещаете журнал на устройстве данных или метаданных, то вы должны
+    установить эту опцию в какое-то значение сами (или использовать скрипт
+    make-osd.sh).
+- name: meta_offset
+  type: int
+  default: 0
+  info: |
+    Offset on the device in bytes where the metadata area is stored.
+    Again, set it to something if you colocate metadata with journal or data.
+  info_ru: |
+    Смещение на устройстве в байтах, по которому располагаются метаданные.
+    Эту опцию нужно задать, если метаданные у вас хранятся на том же
+    устройстве, что данные или журнал.
+- name: data_offset
+  type: int
+  default: 0
+  info: |
+    Offset on the device in bytes where the data area is stored.
+    Again, set it to something if you colocate data with journal or metadata.
+  info_ru: |
+    Смещение на устройстве в байтах, по которому располагаются данные.
+    Эту опцию нужно задать, если данные у вас хранятся на том же
+    устройстве, что метаданные или журнал.
+- name: data_size
+  type: int
+  info: |
+    Data area size in bytes. By default, the whole data device up to the end
+    will be used for the data area, but you can restrict it if you want to use
+    a smaller part. Note that there is no option to set metadata area size -
+    it's derived from the data area size.
+  info_ru: |
+    Размер области данных в байтах. По умолчанию под данные будет использована
+    вся доступная область устройства данных до конца устройства, но вы можете
+    использовать эту опцию, чтобы ограничить её меньшим размером. Заметьте, что
+    опции размера области метаданных нет - она вычисляется из размера области
+    данных автоматически.
+- name: meta_block_size
+  type: int
+  default: 4096
+  info: |
+    Physical block size of the metadata device. 4096 for most current
+    HDDs and SSDs.
+  info_ru: |
+    Размер физического блока устройства метаданных. 4096 для большинства
+    современных SSD и HDD.
+- name: journal_block_size
+  type: int
+  default: 4096
+  info: |
+    Physical block size of the journal device. Must be a multiple of
+    `disk_alignment`. 4096 for most current HDDs and SSDs.
+  info_ru: |
+    Размер физического блока устройства журнала. Должен быть кратен
+    `disk_alignment`. 4096 для большинства современных SSD и HDD.
+- name: disable_data_fsync
+  type: bool
+  default: false
+  info: |
+    Do not issue fsyncs to the data device, i.e. do not flush its cache.
+    Safe ONLY if your data device has write-through cache. If you disable
+    the cache yourself using `hdparm` or `scsi_disk/cache_type` then make sure
+    that the cache disable command is run every time before starting Vitastor
+    OSD, for example, in the systemd unit. See also `immediate_commit` option
+    for the instructions to disable cache and how to benefit from it.
+  info_ru: |
+    Не отправлять fsync-и устройству данных, т.е. не сбрасывать его кэш.
+    Безопасно, ТОЛЬКО если ваше устройство данных имеет кэш со сквозной
+    записью (write-through). Если вы отключаете кэш через `hdparm` или
+    `scsi_disk/cache_type`, то удостоверьтесь, что команда отключения кэша
+    выполняется перед каждым запуском Vitastor OSD, например, в systemd unit-е.
+    Смотрите также опцию `immediate_commit` для инструкций по отключению кэша
+    и о том, как из этого извлечь выгоду.
+- name: disable_meta_fsync
+  type: bool
+  default: false
+  info: |
+    Same as disable_data_fsync, but for the metadata device. If the metadata
+    device is not set or if the data device is used for the metadata the option
+    is ignored and disable_data_fsync value is used instead of it.
+  info_ru: |
+    То же, что disable_data_fsync, но для устройства метаданных. Если устройство
+    метаданных не задано или если оно равно устройству данных, значение опции
+    игнорируется и вместо него используется значение опции disable_data_fsync.
+- name: disable_journal_fsync
+  type: bool
+  default: false
+  info: |
+    Same as disable_data_fsync, but for the journal device. If the journal
+    device is not set or if the metadata device is used for the journal the
+    option is ignored and disable_meta_fsync value is used instead of it. If
+    the same device is used for data, metadata and journal the option is also
+    ignored and disable_data_fsync value is used instead of it.
+  info_ru: |
+    То же, что disable_data_fsync, но для устройства журнала. Если устройство
+    журнала не задано или если оно равно устройству метаданных, значение опции
+    игнорируется и вместо него используется значение опции disable_meta_fsync.
+    Если одно и то же устройство используется и под данные, и под журнал, и под
+    метаданные - значение опции также игнорируется и вместо него используется
+    значение опции disable_data_fsync.
+- name: disable_device_lock
+  type: bool
+  default: false
+  info: |
+    Do not lock data, metadata and journal block devices exclusively with
+    flock(). Though it's not recommended, but you can use it you want to run
+    multiple OSD with a single device and different offsets, without using
+    partitions.
+  info_ru: |
+    Не блокировать устройства данных, метаданных и журнала от открытия их
+    другими OSD с помощью flock(). Так делать не рекомендуется, но теоретически
+    вы можете это использовать, чтобы запускать несколько OSD на одном
+    устройстве с разными смещениями и без использования разделов.
+- name: disk_alignment
+  type: int
+  default: 4096
+  info: |
+    Required physical disk write alignment. Most current SSD and HDD drives
+    use 4 KB physical sectors even if they report 512 byte logical sector
+    size, so 4 KB is a good default setting.
+
+    Note, however, that physical sector size also affects WA, because with block
+    devices it's impossible to write anything smaller than a block. So, when
+    Vitastor has to write a single metadata entry that's only about 32 bytes in
+    size, it actually has to write the whole 4 KB sector.
+
+    Because of this it can actually be beneficial to use SSDs which work well
+    with 512 byte sectors and use 512 byte disk_alignment, journal_block_size
+    and meta_block_size. But the only SSD that may fit into this category is
+    Intel Optane (probably, not tested yet).
+
+    Clients don't need to be aware of disk_alignment, so it's not required to
+    put a modified value into etcd key /vitastor/config/global.
+  info_ru: |
+    Требуемое выравнивание записи на физические диски. Почти все современные
+    SSD и HDD диски используют 4 КБ физические секторы, даже если показывают
+    логический размер сектора 512 байт, поэтому 4 КБ - хорошее значение по
+    умолчанию.
+
+    Однако стоит понимать, что физический размер сектора тоже влияет на
+    избыточную запись (WA), потому что ничего меньше блока (сектора) на блочное
+    устройство записать невозможно. Таким образом, когда Vitastor-у нужно
+    записать на диск всего лишь одну 32-байтную запись метаданных, фактически
+    приходится перезаписывать 4 КБ сектор целиком.
+
+    Поэтому, на самом деле, может быть выгодно найти SSD, хорошо работающие с
+    меньшими, 512-байтными, блоками и использовать 512-байтные disk_alignment,
+    journal_block_size и meta_block_size. Однако единственные SSD, которые
+    теоретически могут попасть в эту категорию - это Intel Optane (но и это
+    пока не проверялось автором).
+
+    Клиентам не обязательно знать про disk_alignment, так что помещать значение
+    этого параметра в etcd в /vitastor/config/global не нужно.

docs/params/monitor.yml

@@ -0,0 +1,65 @@
+- name: etcd_mon_ttl
+  type: sec
+  min: 10
+  default: 30
+  info: Monitor etcd lease refresh interval in seconds
+  info_ru: Интервал обновления etcd резервации (lease) монитором
+- name: etcd_mon_timeout
+  type: ms
+  default: 1000
+  info: etcd request timeout used by monitor
+  info_ru: Таймаут выполнения запросов к etcd от монитора
+- name: etcd_mon_retries
+  type: int
+  default: 5
+  info: Maximum number of attempts for one monitor etcd request
+  info_ru: Максимальное число попыток выполнения запросов к etcd монитором
+- name: mon_change_timeout
+  type: ms
+  min: 100
+  default: 1000
+  info: Optimistic retry interval for monitor etcd modification requests
+  info_ru: Время повтора при коллизиях при запросах модификации в etcd, производимых монитором
+- name: mon_stats_timeout
+  type: ms
+  min: 100
+  default: 1000
+  info: |
+    Interval for monitor to wait before updating aggregated statistics in
+    etcd after receiving OSD statistics updates
+  info_ru: |
+    Интервал, который монитор ожидает при изменении статистики по отдельным
+    OSD перед обновлением агрегированной статистики в etcd
+- name: osd_out_time
+  type: sec
+  default: 600
+  info: |
+    Time after which a failed OSD is removed from the data distribution.
+    I.e. time which the monitor waits before attempting to restore data
+    redundancy using other OSDs.
+  info_ru: |
+    Время, через которое отключенный OSD исключается из распределения данных.
+    То есть, время, которое монитор ожидает перед попыткой переместить данные
+    на другие OSD и таким образом восстановить избыточность хранения.
+- name: placement_levels
+  type: json
+  default: '`{"host":100,"osd":101}`'
+  info: |
+    Levels for the placement tree. You can define arbitrary tree levels by
+    defining them in this parameter. The configuration parameter value should
+    contain a JSON object with level names as keys and integer priorities as
+    values.  Smaller priority means higher level in tree. For example,
+    "datacenter" should have smaller priority than "osd". "host" and "osd"
+    levels are always predefined and can't be removed. If one of them is not
+    present in the configuration, then it is defined with the default priority
+    (100 for "host", 101 for "osd").
+  info_ru: |
+    Определения уровней для дерева размещения OSD. Вы можете определять
+    произвольные уровни, помещая их в данный параметр конфигурации. Значение
+    параметра должно содержать JSON-объект, ключи которого будут являться
+    названиями уровней, а значения - целочисленными приоритетами. Меньшие
+    приоритеты соответствуют верхним уровням дерева. Например, уровень
+    "датацентр" должен иметь меньший приоритет, чем "OSD". Уровни с названиями
+    "host" и "osd" являются предопределёнными и не могут быть удалены. Если
+    один из них отсутствует в конфигурации, он доопределяется с приоритетом по
+    умолчанию (100 для уровня "host", 101 для "osd").

docs/params/network.yml

@@ -0,0 +1,234 @@
+- name: tcp_header_buffer_size
+  type: int
+  default: 65536
+  info: |
+    Size of the buffer used to read data using an additional copy. Vitastor
+    packet headers are 128 bytes, payload is always at least 4 KB, so it is
+    usually beneficial to try to read multiple packets at once even though
+    it requires to copy the data an additional time. The rest of each packet
+    is received without an additional copy. You can try to play with this
+    parameter and see how it affects random iops and linear bandwidth if you
+    want.
+  info_ru: |
+    Размер буфера для чтения данных с дополнительным копированием. Пакеты
+    Vitastor содержат 128-байтные заголовки, за которыми следуют данные размером
+    от 4 КБ и для мелких операций ввода-вывода обычно выгодно за 1 вызов читать
+    сразу несколько пакетов, даже не смотря на то, что это требует лишний раз
+    скопировать данные. Часть каждого пакета за пределами значения данного
+    параметра читается без дополнительного копирования. Вы можете попробовать
+    поменять этот параметр и посмотреть, как он влияет на производительность
+    случайного и линейного доступа.
+- name: use_sync_send_recv
+  type: bool
+  default: false
+  info: |
+    If true, synchronous send/recv syscalls are used instead of io_uring for
+    socket communication. Useless for OSDs because they require io_uring anyway,
+    but may be required for clients with old kernel versions.
+  info_ru: |
+    Если установлено в истину, то вместо io_uring для передачи данных по сети
+    будут использоваться обычные синхронные системные вызовы send/recv. Для OSD
+    это бессмысленно, так как OSD в любом случае нуждается в io_uring, но, в
+    принципе, это может применяться для клиентов со старыми версиями ядра.
+- name: use_rdma
+  type: bool
+  default: true
+  info: |
+    Try to use RDMA for communication if it's available. Disable if you don't
+    want Vitastor to use RDMA. RDMA increases the performance, but TCP-only
+    clients can still talk to an RDMA-enabled cluster, so you don't need to
+    make sure that all clients support RDMA when enabling it.
+  info_ru: |
+    Пытаться использовать RDMA для связи при наличии доступных устройств.
+    Отключите, если вы не хотите, чтобы Vitastor использовал RDMA.
+    RDMA улучшает производительность, но 
+    Клиенты и клиентов and TCP-only clients in the cluster at the
+    same time - TCP-only clients are still able to use an RDMA-enabled cluster.
+- name: rdma_device
+  type: string
+  info: |
+    RDMA device name to use for Vitastor OSD communications (for example,
+    "rocep5s0f0"). Please note that if your RDMA device doesn't support
+    Implicit ODP (Implicit On-Demand Paging) then all Vitastor OSDs and clients
+    will have to use mlockall() to lock all application memory to use RDMA.
+    In case of the native Vitastor QEMU driver with RDMA, all virtual machine
+    memory will be locked if your RDMA device doesn't support Implicit ODP.
+
+    Notably, Mellanox ConnectX-3 and older adapters don't support Implicit ODP,
+    while ConnectX-4 and newer do. Run `ibv_devinfo -v` as root to list
+    available RDMA devices and their features.
+  info_ru: |
+    Название RDMA-устройства для связи с Vitastor OSD (например, "rocep5s0f0").
+    Имейте в виду, что если ваше устройство не поддерживает Implicit ODP
+    (Implicit On-Demand Paging), то все OSD и клиенты Vitastor будут вынуждены
+    блокировать всю память приложения с помощью mlockall(), чтобы задействовать
+    RDMA. В случае нативного QEMU-драйвера это будет означать, что при
+    использовании RDMA на устройстве без поддержки Implicit ODP блокироваться
+    от выгрузки будет вся память виртуальных машин.
+
+    В случае с адаптерами Mellanox Implicit ODP поддерживается начиная с
+    ConnectX-4. ConnectX-3 и более старые адаптеры не поддерживают Implicit ODP.
+    Чтобы посмотреть список своих RDMA-устройств и их возможностей, запустите
+    `ibv_devinfo -v` от имени суперпользователя.
+- name: rdma_port_num
+  type: int
+  default: 1
+  info: |
+    RDMA device port number to use. Only for devices that have more than 1 port.
+    See `phys_port_cnt` in `ibv_devinfo -v` output to determine how many ports
+    your device has.
+  info_ru: |
+    Номер порта RDMA-устройства, который следует использовать. Имеет смысл
+    только для устройств, у которых более 1 порта. Чтобы узнать, сколько портов
+    у вашего адаптера, посмотрите `phys_port_cnt` в выводе команды
+    `ibv_devinfo -v`.
+- name: rdma_gid_index
+  type: int
+  default: 0
+  info: |
+    Global address identifier index of the RDMA device to use. Different GID
+    indexes may correspond to different protocols like RoCEv1, RoCEv2 and iWARP.
+    Search for "GID" in `ibv_devinfo -v` output to determine which GID index
+    you need.
+
+    **IMPORTANT:** If you want to use RoCEv2 (as recommended) then the correct
+    rdma_gid_index is usually 1 (IPv6) or 3 (IPv4).
+  info_ru: |
+    Номер глобального идентификатора адреса RDMA-устройства, который следует
+    использовать. Разным gid_index могут соответствовать разные протоколы связи:
+    RoCEv1, RoCEv2, iWARP. Чтобы понять, какой нужен вам - смотрите строчки со
+    словом "GID" в выводе команды `ibv_devinfo -v`.
+
+    **ВАЖНО:** Если вы хотите использовать RoCEv2 (как мы и рекомендуем), то
+    правильный rdma_gid_index, как правило, 1 (IPv6) или 3 (IPv4).
+- name: rdma_mtu
+  type: int
+  default: 4096
+  info: |
+    RDMA Path MTU to use. Must be 1024, 2048 or 4096. There is usually no
+    sense to change it from the default 4096.
+  info_ru: |
+    Максимальная единица передачи (Path MTU) для RDMA. Должно быть равно 1024,
+    2048 или 4096. Обычно нет смысла менять значение по умолчанию, равное 4096.
+- name: rdma_max_sge
+  type: int
+  default: 128
+  info: |
+    Maximum number of scatter/gather entries to use for RDMA. OSDs negotiate
+    the actual value when establishing connection anyway, so it's usually not
+    required to change this parameter.
+  info_ru: |
+    Максимальное число записей разделения/сборки (scatter/gather) для RDMA.
+    OSD в любом случае согласовывают реальное значение при установке соединения,
+    так что менять этот параметр обычно не нужно.
+- name: rdma_max_msg
+  type: int
+  default: 1048576
+  info: Maximum size of a single RDMA send or receive operation in bytes.
+  info_ru: Максимальный размер одной RDMA-операции отправки или приёма.
+- name: rdma_max_recv
+  type: int
+  default: 8
+  info: |
+    Maximum number of parallel RDMA receive operations. Note that this number
+    of receive buffers `rdma_max_msg` in size are allocated for each client,
+    so this setting actually affects memory usage. This is because RDMA receive
+    operations are (sadly) still not zero-copy in Vitastor. It may be fixed in
+    later versions.
+  info_ru: |
+    Максимальное число параллельных RDMA-операций получения данных. Следует
+    иметь в виду, что данное число буферов размером `rdma_max_msg` выделяется
+    для каждого подключённого клиентского соединения, так что данная настройка
+    влияет на потребление памяти. Это так потому, что RDMA-приём данных в
+    Vitastor, увы, всё равно не является zero-copy, т.е. всё равно 1 раз
+    копирует данные в памяти. Данная особенность, возможно, будет исправлена в
+    более новых версиях Vitastor.
+- name: peer_connect_interval
+  type: sec
+  min: 1
+  default: 5
+  info: Interval before attempting to reconnect to an unavailable OSD.
+  info_ru: Время ожидания перед повторной попыткой соединиться с недоступным OSD.
+- name: peer_connect_timeout
+  type: sec
+  min: 1
+  default: 5
+  info: Timeout for OSD connection attempts.
+  info_ru: Максимальное время ожидания попытки соединения с OSD.
+- name: osd_idle_timeout
+  type: sec
+  min: 1
+  default: 5
+  info: |
+    OSD connection inactivity time after which clients and other OSDs send
+    keepalive requests to check state of the connection.
+  info_ru: |
+    Время неактивности соединения с OSD, после которого клиенты или другие OSD
+    посылают запрос проверки состояния соединения.
+- name: osd_ping_timeout
+  type: sec
+  min: 1
+  default: 5
+  info: |
+    Maximum time to wait for OSD keepalive responses. If an OSD doesn't respond
+    within this time, the connection to it is dropped and a reconnection attempt
+    is scheduled.
+  info_ru: |
+    Максимальное время ожидания ответа на запрос проверки состояния соединения.
+    Если OSD не отвечает за это время, соединение отключается и производится
+    повторная попытка соединения.
+- name: up_wait_retry_interval
+  type: ms
+  min: 50
+  default: 500
+  info: |
+    OSDs respond to clients with a special error code when they receive I/O
+    requests for a PG that's not synchronized and started. This parameter sets
+    the time for the clients to wait before re-attempting such I/O requests.
+  info_ru: |
+    Когда OSD получают от клиентов запросы ввода-вывода, относящиеся к не
+    поднятым на данный момент на них PG, либо к PG в процессе синхронизации,
+    они отвечают клиентам специальным кодом ошибки, означающим, что клиент
+    должен некоторое время подождать перед повторением запроса. Именно это время
+    ожидания задаёт данный параметр.
+- name: max_etcd_attempts
+  type: int
+  default: 5
+  info: |
+    Maximum number of attempts for etcd requests which can't be retried
+    indefinitely.
+  info_ru: |
+    Максимальное число попыток выполнения запросов к etcd для тех запросов,
+    которые нельзя повторять бесконечно.
+- name: etcd_quick_timeout
+  type: ms
+  default: 1000
+  info: |
+    Timeout for etcd requests which should complete quickly, like lease refresh.
+  info_ru: |
+    Максимальное время выполнения запросов к etcd, которые должны завершаться
+    быстро, таких, как обновление резервации (lease).
+- name: etcd_slow_timeout
+  type: ms
+  default: 5000
+  info: Timeout for etcd requests which are allowed to wait for some time.
+  info_ru: |
+    Максимальное время выполнения запросов к etcd, для которых не обязательно
+    гарантировать быстрое выполнение.
+- name: etcd_keepalive_timeout
+  type: sec
+  default: max(30, etcd_report_interval*2)
+  info: |
+    Timeout for etcd connection HTTP Keep-Alive. Should be higher than
+    etcd_report_interval to guarantee that keepalive actually works.
+  info_ru: |
+    Таймаут для HTTP Keep-Alive в соединениях к etcd. Должен быть больше, чем
+    etcd_report_interval, чтобы keepalive гарантированно работал.
+- name: etcd_ws_keepalive_timeout
+  type: sec
+  default: 30
+  info: |
+    etcd websocket ping interval required to keep the connection alive and
+    detect disconnections quickly.
+  info_ru: |
+    Интервал проверки живости вебсокет-подключений к etcd.

docs/params/osd.yml

@@ -0,0 +1,341 @@
+- name: etcd_report_interval
+  type: sec
+  default: 5
+  info: |
+    Interval at which OSDs report their state to etcd. Affects OSD lease time
+    and thus the failover speed. Lease time is equal to this parameter value
+    plus max_etcd_attempts * etcd_quick_timeout because it should be guaranteed
+    that every OSD always refreshes its lease in time.
+  info_ru: |
+    Интервал, с которым OSD обновляет своё состояние в etcd. Значение параметра
+    влияет на время резервации (lease) OSD и поэтому на скорость переключения
+    при падении OSD. Время lease равняется значению этого параметра плюс
+    max_etcd_attempts * etcd_quick_timeout.
+- name: run_primary
+  type: bool
+  default: true
+  info: |
+    Start primary OSD logic on this OSD. As of now, can be turned off only for
+    debugging purposes. It's possible to implement additional feature for the
+    monitor which may allow to separate primary and secondary OSDs, but it's
+    unclear why anyone could need it, so it's not implemented.
+  info_ru: |
+    Запускать логику первичного OSD на данном OSD. На данный момент отключать
+    эту опцию может иметь смысл только в целях отладки. В теории, можно
+    реализовать дополнительный режим для монитора, который позволит отделять
+    первичные OSD от вторичных, но пока не понятно, зачем это может кому-то
+    понадобиться, поэтому это не реализовано.
+- name: osd_network
+  type: string or array of strings
+  type_ru: строка или массив строк
+  info: |
+    Network mask of the network (IPv4 or IPv6) to use for OSDs. Note that
+    although it's possible to specify multiple networks here, this does not
+    mean that OSDs will create multiple listening sockets - they'll only
+    pick the first matching address of an UP + RUNNING interface. Separate
+    networks for cluster and client connections are also not implemented, but
+    they are mostly useless anyway, so it's not a big deal.
+  info_ru: |
+    Маска подсети (IPv4 или IPv6) для использования для соединений с OSD.
+    Имейте в виду, что хотя сейчас и можно передать в этот параметр несколько
+    подсетей, это не означает, что OSD будут создавать несколько слушающих
+    сокетов - они лишь будут выбирать адрес первого поднятого (состояние UP +
+    RUNNING), подходящий под заданную маску. Также не реализовано разделение
+    кластерной и публичной сетей OSD. Правда, от него обычно всё равно довольно
+    мало толку, так что особенной проблемы в этом нет.
+- name: bind_address
+  type: string
+  default: "0.0.0.0"
+  info: |
+    Instead of the network mask, you can also set OSD listen address explicitly
+    using this parameter. May be useful if you want to start OSDs on interfaces
+    that are not UP + RUNNING.
+  info_ru: |
+    Этим параметром можно явным образом задать адрес, на котором будет ожидать
+    соединений OSD (вместо использования маски подсети). Может быть полезно,
+    например, чтобы запускать OSD на неподнятых интерфейсах (не UP + RUNNING).
+- name: bind_port
+  type: int
+  info: |
+    By default, OSDs pick random ports to use for incoming connections
+    automatically. With this option you can set a specific port for a specific
+    OSD by hand.
+  info_ru: |
+    По умолчанию OSD сами выбирают случайные порты для входящих подключений.
+    С помощью данной опции вы можете задать порт для отдельного OSD вручную.
+- name: autosync_interval
+  type: sec
+  default: 5
+  info: |
+    Time interval at which automatic fsyncs/flushes are issued by each OSD when
+    the immediate_commit mode if disabled. fsyncs are required because without
+    them OSDs quickly fill their journals, become unable to clear them and
+    stall. Also this option limits the amount of recent uncommitted changes
+    which OSDs may lose in case of a power outage in case when clients don't
+    issue fsyncs at all.
+  info_ru: |
+    Временной интервал отправки автоматических fsync-ов (операций очистки кэша)
+    каждым OSD для случая, когда режим immediate_commit отключён. fsync-и нужны
+    OSD, чтобы успевать очищать журнал - без них OSD быстро заполняют журналы и
+    перестают обрабатывать операции записи. Также эта опция ограничивает объём
+    недавних незафиксированных изменений, которые OSD могут терять при
+    отключении питания, если клиенты вообще не отправляют fsync.
+- name: autosync_writes
+  type: int
+  default: 128
+  info: |
+    Same as autosync_interval, but sets the maximum number of uncommitted write
+    operations before issuing an fsync operation internally.
+  info_ru: |
+    Аналогично autosync_interval, но задаёт не временной интервал, а
+    максимальное количество незафиксированных операций записи перед
+    принудительной отправкой fsync-а.
+- name: recovery_queue_depth
+  type: int
+  default: 4
+  info: |
+    Maximum recovery operations per one primary OSD at any given moment of time.
+    Currently it's the only parameter available to tune the speed or recovery
+    and rebalancing, but it's planned to implement more.
+  info_ru: |
+    Максимальное число операций восстановления на одном первичном OSD в любой
+    момент времени. На данный момент единственный параметр, который можно менять
+    для ускорения или замедления восстановления и перебалансировки данных, но
+    в планах реализация других параметров.
+- name: recovery_sync_batch
+  type: int
+  default: 16
+  info: Maximum number of recovery operations before issuing an additional fsync.
+  info_ru: Максимальное число операций восстановления перед дополнительным fsync.
+- name: readonly
+  type: bool
+  default: false
+  info: |
+    Read-only mode. If this is enabled, an OSD will never issue any writes to
+    the underlying device. This may be useful for recovery purposes.
+  info_ru: |
+    Режим "только чтение". Если включить этот режим, OSD не будет писать ничего
+    на диск. Может быть полезно в целях восстановления.
+- name: no_recovery
+  type: bool
+  default: false
+  info: |
+    Disable automatic background recovery of objects. Note that it doesn't
+    affect implicit recovery of objects happening during writes - a write is
+    always made to a full set of at least pg_minsize OSDs.
+  info_ru: |
+    Отключить автоматическое фоновое восстановление объектов. Обратите внимание,
+    что эта опция не отключает восстановление объектов, происходящее при
+    записи - запись всегда производится в полный набор из как минимум pg_minsize
+    OSD.
+- name: no_rebalance
+  type: bool
+  default: false
+  info: |
+    Disable background movement of data between different OSDs. Disabling it
+    means that PGs in the `has_misplaced` state will be left in it indefinitely.
+  info_ru: |
+    Отключить фоновое перемещение объектов между разными OSD. Отключение
+    означает, что PG, находящиеся в состоянии `has_misplaced`, будут оставлены
+    в нём на неопределённый срок.
+- name: print_stats_interval
+  type: sec
+  default: 3
+  info: |
+    Time interval at which OSDs print simple human-readable operation
+    statistics on stdout.
+  info_ru: |
+    Временной интервал, с которым OSD печатают простую человекочитаемую
+    статистику выполнения операций в стандартный вывод.
+- name: slow_log_interval
+  type: sec
+  default: 10
+  info: |
+    Time interval at which OSDs dump slow or stuck operations on stdout, if
+    they're any. Also it's the time after which an operation is considered
+    "slow".
+  info_ru: |
+    Временной интервал, с которым OSD выводят в стандартный вывод список
+    медленных или зависших операций, если таковые имеются. Также время, при
+    превышении которого операция считается "медленной".
+- name: max_write_iodepth
+  type: int
+  default: 128
+  info: |
+    Parallel client write operation limit per one OSD. Operations that exceed
+    this limit are pushed to a temporary queue instead of being executed
+    immediately.
+  info_ru: |
+    Максимальное число одновременных клиентских операций записи на один OSD.
+    Операции, превышающие этот лимит, не исполняются сразу, а сохраняются во
+    временной очереди.
+- name: min_flusher_count
+  type: int
+  default: 1
+  info: |
+    Flusher is a micro-thread that moves data from the journal to the data
+    area of the device. Their number is auto-tuned between minimum and maximum.
+    Minimum number is set by this parameter.
+  info_ru: |
+    Flusher - это микро-поток (корутина), которая копирует данные из журнала в
+    основную область устройства данных. Их число настраивается динамически между
+    минимальным и максимальным значением. Этот параметр задаёт минимальное число.
+- name: max_flusher_count
+  type: int
+  default: 256
+  info: |
+    Maximum number of journal flushers (see above min_flusher_count).
+  info_ru: |
+    Максимальное число микро-потоков очистки журнала (см. выше min_flusher_count).
+- name: inmemory_metadata
+  type: bool
+  default: true
+  info: |
+    This parameter makes Vitastor always keep metadata area of the block device
+    in memory. It's required for good performance because it allows to avoid
+    additional read-modify-write cycles during metadata modifications. Metadata
+    area size is currently roughly 224 MB per 1 TB of data. You can turn it off
+    to reduce memory usage by this value, but it will hurt performance. This
+    restriction is likely to be removed in the future along with the upgrade
+    of the metadata storage scheme.
+  info_ru: |
+    Данный параметр заставляет Vitastor всегда держать область метаданных диска
+    в памяти. Это нужно, чтобы избегать дополнительных операций чтения с диска
+    при записи. Размер области метаданных на данный момент составляет примерно
+    224 МБ на 1 ТБ данных. При включении потребление памяти снизится примерно
+    на эту величину, но при этом также снизится и производительность. В будущем,
+    после обновления схемы хранения метаданных, это ограничение, скорее всего,
+    будет ликвидировано.
+- name: inmemory_journal
+  type: bool
+  default: true
+  info: |
+    This parameter make Vitastor always keep journal area of the block
+    device in memory. Turning it off will, again, reduce memory usage, but
+    hurt performance because flusher coroutines will have to read data from
+    the disk back before copying it into the main area. The memory usage benefit
+    is typically very small because it's sufficient to have 16-32 MB journal
+    for SSD OSDs. However, in theory it's possible that you'll want to turn it
+    off for hybrid (HDD+SSD) OSDs with large journals on quick devices.
+  info_ru: |
+    Данный параметр заставляет Vitastor всегда держать в памяти журналы OSD.
+    Отключение параметра, опять же, снижает потребление памяти, но ухудшает
+    производительность, так как для копирования данных из журнала в основную
+    область устройства OSD будут вынуждены читать их обратно с диска. Выигрыш
+    по памяти при этом обычно крайне низкий, так как для SSD OSD обычно
+    достаточно 16- или 32-мегабайтного журнала. Однако в теории отключение
+    параметра может оказаться полезным для гибридных OSD (HDD+SSD) с большими
+    журналами, расположенными на быстром по сравнению с HDD устройстве.
+- name: journal_sector_buffer_count
+  type: int
+  default: 32
+  info: |
+    Maximum number of buffers that can be used for writing journal metadata
+    blocks. The only situation when you should increase it to a larger value
+    is when you enable journal_no_same_sector_overwrites. In this case set
+    it to, for example, 1024.
+  info_ru: |
+    Максимальное число буферов, разрешённых для использования под записываемые
+    в журнал блоки метаданных. Единственная ситуация, в которой этот параметр
+    нужно менять - это если вы включаете journal_no_same_sector_overwrites. В
+    этом случае установите данный параметр, например, в 1024.
+- name: journal_no_same_sector_overwrites
+  type: bool
+  default: false
+  info: |
+    Enable this option for SSDs like Intel D3-S4510 and D3-S4610 which REALLY
+    don't like when a program overwrites the same sector multiple times in a
+    row and slow down significantly (from 25000+ iops to ~3000 iops). When
+    this option is set, Vitastor will always move to the next sector of the
+    journal after writing it instead of possibly overwriting it the second time.
+  info_ru: |
+    Включайте данную опцию для SSD вроде Intel D3-S4510 и D3-S4610, которые
+    ОЧЕНЬ не любят, когда ПО перезаписывает один и тот же сектор несколько раз
+    подряд. Такие SSD при многократной перезаписи одного и того же сектора
+    сильно замедляются - условно, с 25000 и более iops до 3000 iops. Когда
+    данная опция установлена, Vitastor всегда переходит к следующему сектору
+    журнала после записи вместо потенциально повторной перезаписи того же
+    самого сектора.
+- name: throttle_small_writes
+  type: bool
+  default: false
+  info: |
+    Enable soft throttling of small journaled writes. Useful for hybrid OSDs
+    with fast journal/metadata devices and slow data devices. The idea is that
+    small writes complete very quickly because they're first written to the
+    journal device, but moving them to the main device is slow. So if an OSD
+    allows clients to issue a lot of small writes it will perform very good
+    for several seconds and then the journal will fill up and the performance
+    will drop to almost zero. Throttling is meant to prevent this problem by
+    artifically slowing quick writes down based on the amount of free space in
+    the journal. When throttling is used, the performance of small writes will
+    decrease smoothly instead of abrupt drop at the moment when the journal
+    fills up.
+  info_ru: |
+    Разрешить мягкое ограничение скорости журналируемой записи. Полезно для
+    гибридных OSD с быстрыми устройствами метаданных и медленными устройствами
+    данных. Идея заключается в том, что мелкие записи в этой ситуации могут
+    завершаться очень быстро, так как они изначально записываются на быстрое
+    журнальное устройство (SSD). Но перемещать их потом на основное медленное
+    устройство долго. Поэтому если OSD быстро примет от клиентов очень много
+    мелких операций записи, он быстро заполнит свой журнал, после чего
+    производительность записи резко упадёт практически до нуля. Ограничение
+    скорости записи призвано решить эту проблему с помощью искусственного
+    замедления операций записи на основании объёма свободного места в журнале.
+    Когда эта опция включена, производительность мелких операций записи будет
+    снижаться плавно, а не резко в момент окончательного заполнения журнала.
+- name: throttle_target_iops
+  type: int
+  default: 100
+  info: |
+    Target maximum number of throttled operations per second under the condition
+    of full journal. Set it to approximate random write iops of your data devices
+    (HDDs).
+  info_ru: |
+    Расчётное максимальное число ограничиваемых операций в секунду при условии
+    отсутствия свободного места в журнале. Устанавливайте приблизительно равным
+    максимальной производительности случайной записи ваших устройств данных
+    (HDD) в операциях в секунду.
+- name: throttle_target_mbs
+  type: int
+  default: 100
+  info: |
+    Target maximum bandwidth in MB/s of throttled operations per second under
+    the condition of full journal. Set it to approximate linear write
+    performance of your data devices (HDDs).
+  info_ru: |
+    Расчётный максимальный размер в МБ/с ограничиваемых операций в секунду при
+    условии отсутствия свободного места в журнале. Устанавливайте приблизительно
+    равным максимальной производительности линейной записи ваших устройств
+    данных (HDD).
+- name: throttle_target_parallelism
+  type: int
+  default: 1
+  info: |
+    Target maximum parallelism of throttled operations under the condition of
+    full journal. Set it to approximate internal parallelism of your data
+    devices (1 for HDDs, 4-8 for SSDs).
+  info_ru: |
+    Расчётный максимальный параллелизм ограничиваемых операций в секунду при
+    условии отсутствия свободного места в журнале. Устанавливайте приблизительно
+    равным внутреннему параллелизму ваших устройств данных (1 для HDD, 4-8
+    для SSD).
+- name: throttle_threshold_us
+  type: us
+  default: 50
+  info: |
+    Minimal computed delay to be applied to throttled operations. Usually
+    doesn't need to be changed.
+  info_ru: |
+    Минимальная применимая к ограничиваемым операциям задержка. Обычно не
+    требует изменений.
+- name: osd_memlock
+  type: bool
+  default: false
+  info: >
+    Lock all OSD memory to prevent it from being unloaded into swap with
+    mlockall(). Requires sufficient ulimit -l (max locked memory).
+  info_ru: >
+    Блокировать всю память OSD с помощью mlockall, чтобы запретить её выгрузку
+    в пространство подкачки. Требует достаточного значения ulimit -l (лимита
+    заблокированной памяти).

mon/lp-optimizer.js

@@ -50,7 +50,7 @@ async function lp_solve(text)
     return { score, vars };
 }
 
-async function optimize_initial({ osd_tree, pg_count, pg_size = 3, pg_minsize = 2, max_combinations = 10000, parity_space = 1 })
+async function optimize_initial({ osd_tree, pg_count, pg_size = 3, pg_minsize = 2, max_combinations = 10000, parity_space = 1, ordered = false })
 {
     if (!pg_count || !osd_tree)
     {
@@ -92,7 +92,7 @@ async function optimize_initial({ osd_tree, pg_count, pg_size = 3, pg_minsize =
         console.log(lp);
         throw new Error('Problem is infeasible or unbounded - is it a bug?');
     }
-    const int_pgs = make_int_pgs(lp_result.vars, pg_count);
+    const int_pgs = make_int_pgs(lp_result.vars, pg_count, ordered);
     const eff = pg_list_space_efficiency(int_pgs, all_weights, pg_minsize, parity_space);
     const res = {
         score: lp_result.score,
@@ -115,7 +115,7 @@ function shuffle(array)
     }
 }
 
-function make_int_pgs(weights, pg_count)
+function make_int_pgs(weights, pg_count, round_robin)
 {
     const total_weight = Object.values(weights).reduce((a, c) => Number(a) + Number(c), 0);
     let int_pgs = [];
@@ -123,10 +123,15 @@ function make_int_pgs(weights, pg_count)
     let weight_left = total_weight;
     for (const pg_name in weights)
     {
+        let cur_pg = pg_name.substr(3).split('_');
         let n = Math.round(weights[pg_name] / weight_left * pg_left);
         for (let i = 0; i < n; i++)
         {
-            int_pgs.push(pg_name.substr(3).split('_'));
+            int_pgs.push([ ...cur_pg ]);
+            if (round_robin)
+            {
+                cur_pg.push(cur_pg.shift());
+            }
         }
         weight_left -= weights[pg_name];
         pg_left -= n;
@@ -135,20 +140,20 @@ function make_int_pgs(weights, pg_count)
     return int_pgs;
 }
 
-function calc_intersect_weights(pg_size, pg_count, prev_weights, all_pgs)
+function calc_intersect_weights(old_pg_size, pg_size, pg_count, prev_weights, all_pgs, ordered)
 {
     const move_weights = {};
-    if ((1 << pg_size) < pg_count)
+    if ((1 << old_pg_size) < pg_count)
     {
         const intersect = {};
         for (const pg_name in prev_weights)
         {
             const pg = pg_name.substr(3).split(/_/);
-            for (let omit = 1; omit < (1 << pg_size); omit++)
+            for (let omit = 1; omit < (1 << old_pg_size); omit++)
             {
                 let pg_omit = [ ...pg ];
-                let intersect_count = pg_size;
-                for (let i = 0; i < pg_size; i++)
+                let intersect_count = old_pg_size;
+                for (let i = 0; i < old_pg_size; i++)
                 {
                     if (omit & (1 << i))
                     {
@@ -156,6 +161,8 @@ function calc_intersect_weights(pg_size, pg_count, prev_weights, all_pgs)
                         intersect_count--;
                     }
                 }
+                if (!ordered)
+                    pg_omit = pg_omit.filter(n => n).sort();
                 pg_omit = pg_omit.join(':');
                 intersect[pg_omit] = Math.max(intersect[pg_omit] || 0, intersect_count);
             }
@@ -169,10 +176,10 @@ function calc_intersect_weights(pg_size, pg_count, prev_weights, all_pgs)
                 for (let i = 0; i < pg_size; i++)
                 {
                     if (omit & (1 << i))
-                    {
                         pg_omit[i] = '';
-                    }
                 }
+                if (!ordered)
+                    pg_omit = pg_omit.filter(n => n).sort();
                 pg_omit = pg_omit.join(':');
                 max_int = Math.max(max_int, intersect[pg_omit] || 0);
             }
@@ -181,15 +188,18 @@ function calc_intersect_weights(pg_size, pg_count, prev_weights, all_pgs)
     }
     else
     {
-        const prev_pg_hashed = Object.keys(prev_weights).map(pg_name => pg_name.substr(3).split(/_/).reduce((a, c) => { a[c] = 1; return a; }, {}));
+        const prev_pg_hashed = Object.keys(prev_weights).map(pg_name => pg_name
+            .substr(3).split(/_/).reduce((a, c, i) => { a[c] = i+1; return a; }, {}));
         for (const pg of all_pgs)
         {
             if (!prev_weights['pg_'+pg.join('_')])
             {
                 let max_int = 0;
-                for (const prev_hash in prev_pg_hashed)
+                for (const prev_hash of prev_pg_hashed)
                 {
-                    const intersect_count = pg.reduce((a, osd) => a + (prev_hash[osd] ? 1 : 0), 0);
+                    const intersect_count = ordered
+                        ? pg.reduce((a, osd, i) => a + (prev_hash[osd] == 1+i ? 1 : 0), 0)
+                        : pg.reduce((a, osd, i) => a + (prev_hash[osd] ? 1 : 0), 0);
                     if (max_int < intersect_count)
                     {
                         max_int = intersect_count;
@@ -238,7 +248,7 @@ function add_valid_previous(osd_tree, prev_weights, all_pgs)
 }
 
 // Try to minimize data movement
-async function optimize_change({ prev_pgs: prev_int_pgs, osd_tree, pg_size = 3, pg_minsize = 2, max_combinations = 10000, parity_space = 1 })
+async function optimize_change({ prev_pgs: prev_int_pgs, osd_tree, pg_size = 3, pg_minsize = 2, max_combinations = 10000, parity_space = 1, ordered = false })
 {
     if (!osd_tree)
     {
@@ -261,9 +271,13 @@ async function optimize_change({ prev_pgs: prev_int_pgs, osd_tree, pg_size = 3,
             prev_pg_per_osd[osd].push([ pg_name, (i >= pg_minsize ? parity_space : 1) ]);
         }
     }
+    const old_pg_size = prev_int_pgs[0].length;
     // Get all combinations
     let all_pgs = random_combinations(osd_tree, pg_size, max_combinations, parity_space > 1);
-    add_valid_previous(osd_tree, prev_weights, all_pgs);
+    if (old_pg_size == pg_size)
+    {
+        add_valid_previous(osd_tree, prev_weights, all_pgs);
+    }
     all_pgs = Object.values(all_pgs);
     const pg_per_osd = {};
     for (const pg of all_pgs)
@@ -277,7 +291,7 @@ async function optimize_change({ prev_pgs: prev_int_pgs, osd_tree, pg_size = 3,
         }
     }
     // Penalize PGs based on their similarity to old PGs
-    const move_weights = calc_intersect_weights(pg_size, pg_count, prev_weights, all_pgs);
+    const move_weights = calc_intersect_weights(old_pg_size, pg_size, pg_count, prev_weights, all_pgs, ordered);
     // Calculate total weight - old PG weights
     const all_pg_names = all_pgs.map(pg => 'pg_'+pg.join('_'));
     const all_pgs_hash = all_pg_names.reduce((a, c) => { a[c] = true; return a; }, {});
@@ -288,11 +302,6 @@ async function optimize_change({ prev_pgs: prev_int_pgs, osd_tree, pg_size = 3,
     lp += 'max: '+all_pg_names.map(pg_name => (
         prev_weights[pg_name] ? `${pg_size+1}*add_${pg_name} - ${pg_size+1}*del_${pg_name}` : `${pg_size+1-move_weights[pg_name]}*${pg_name}`
     )).join(' + ')+';\n';
-    lp += all_pg_names
-        .map(pg_name => (prev_weights[pg_name] ? `add_${pg_name} - del_${pg_name}` : `${pg_name}`))
-        .join(' + ')+' = '+(pg_count
-            - Object.keys(prev_weights).reduce((a, old_pg_name) => (a + (all_pgs_hash[old_pg_name] ? prev_weights[old_pg_name] : 0)), 0)
-        )+';\n';
     for (const osd in pg_per_osd)
     {
         if (osd !== NO_OSD)
@@ -373,11 +382,35 @@ async function optimize_change({ prev_pgs: prev_int_pgs, osd_tree, pg_size = 3,
         {
             differs++;
         }
-        for (let j = 0; j < pg_size; j++)
+    }
+    if (ordered)
+    {
+        for (let i = 0; i < pg_count; i++)
         {
-            if (new_pgs[i][j] != prev_int_pgs[i][j])
+            for (let j = 0; j < pg_size; j++)
             {
-                osd_differs++;
+                if (new_pgs[i][j] != prev_int_pgs[i][j])
+                {
+                    osd_differs++;
+                }
+            }
+        }
+    }
+    else
+    {
+        for (let i = 0; i < pg_count; i++)
+        {
+            const old_map = prev_int_pgs[i].reduce((a, c) => { a[c] = (a[c]|0) + 1; return a; }, {});
+            for (let j = 0; j < pg_size; j++)
+            {
+                if ((0|old_map[new_pgs[i][j]]) > 0)
+                {
+                    old_map[new_pgs[i][j]]--;
+                }
+                else
+                {
+                    osd_differs++;
+                }
             }
         }
     }

mon/make-osd.sh

@@ -4,36 +4,25 @@
 # Copyright (c) Vitaliy Filippov, 2019+
 # License: MIT
 
-# USAGE: ./make-osd.sh /dev/disk/by-partuuid/xxx [ /dev/disk/by-partuuid/yyy]...
-
-IP_SUBSTR="10.200.1."
-ETCD_HOSTS="etcd0=http://10.200.1.10:2380,etcd1=http://10.200.1.11:2380,etcd2=http://10.200.1.12:2380"
+# USAGE:
+# 1) Put etcd_address and osd_network into /etc/vitastor/vitastor.conf. Example:
+#    {
+#        "etcd_address":["http://10.200.1.10:2379/v3","http://10.200.1.11:2379/v3","http://10.200.1.12:2379/v3"],
+#        "osd_network":"10.200.1.0/24"
+#    }
+# 2) Run ./make-osd.sh /dev/disk/by-partuuid/xxx [ /dev/disk/by-partuuid/yyy]...
 
 set -e -x
 
-IP=`ip -json a s | jq -r '.[].addr_info[] | select(.local | startswith("'$IP_SUBSTR'")) | .local'`
-[ "$IP" != "" ] || exit 1
-ETCD_MON=$(echo $ETCD_HOSTS | perl -pe 's/:2380/:2379/g; s/etcd\d*=//g;')
-D=`dirname $0`
-
 # Create OSDs on all passed devices
-OSD_NUM=1
 for DEV in $*; do
 
-# Ugly :) -> node.js rework pending
-while true; do
-    ST=$(etcdctl --endpoints="$ETCD_MON" get --print-value-only /vitastor/osd/stats/$OSD_NUM)
-    if [ "$ST" = "" ]; then
-        break
-    fi
-    OSD_NUM=$((OSD_NUM+1))
-done
-etcdctl --endpoints="$ETCD_MON" put /vitastor/osd/stats/$OSD_NUM '{}'
+OSD_NUM=$(vitastor-cli alloc-osd)
 
 echo Creating OSD $OSD_NUM on $DEV
 
-OPT=`node $D/simple-offsets.js --device $DEV --format options | tr '\n' ' '`
-META=`echo $OPT | grep -Po '(?<=data_offset )\d+'`
+OPT=$(vitastor-cli simple-offsets --format options $DEV | tr '\n' ' ')
+META=$(vitastor-cli simple-offsets --format json $DEV | jq .data_offset)
 dd if=/dev/zero of=$DEV bs=1048576 count=$(((META+1048575)/1048576)) oflag=direct
 
 cat >/etc/systemd/system/vitastor-osd$OSD_NUM.service <<EOF
@@ -48,8 +37,6 @@ LimitNOFILE=1048576
 LimitNPROC=1048576
 LimitMEMLOCK=infinity
 ExecStart=/usr/bin/vitastor-osd \\
-    --etcd_address $IP:2379/v3 \\
-    --bind_address $IP \\
     --osd_num $OSD_NUM \\
     --disable_data_fsync 1 \\
     --immediate_commit all \\

mon/mon-main.js

@@ -9,17 +9,18 @@ const options = {};
 
 for (let i = 2; i < process.argv.length; i++)
 {
-    if (process.argv[i].substr(0, 2) == '--')
+    if (process.argv[i] === '-h' || process.argv[i] === '--help')
+    {
+        console.error('USAGE: '+process.argv[0]+' '+process.argv[1]+' [--verbose 1]'+
+            ' [--etcd_address "http://127.0.0.1:2379,..."] [--config_file /etc/vitastor/vitastor.conf]'+
+            ' [--etcd_prefix "/vitastor"] [--etcd_start_timeout 5]');
+        process.exit();
+    }
+    else if (process.argv[i].substr(0, 2) == '--')
     {
         options[process.argv[i].substr(2)] = process.argv[i+1];
         i++;
     }
 }
 
-if (!options.etcd_url)
-{
-    console.error('USAGE: '+process.argv[0]+' '+process.argv[1]+' --etcd_url "http://127.0.0.1:2379,..." --etcd_prefix "/vitastor" --etcd_start_timeout 5 [--verbose 1]');
-    process.exit();
-}
-
-new Mon(options).start().catch(e => { console.error(e); process.exit(); });
+new Mon(options).start().catch(e => { console.error(e); process.exit(1); });

mon/mon.js

@@ -1,6 +1,7 @@
 // Copyright (c) Vitaliy Filippov, 2019+
 // License: VNPL-1.1 (see README.md for details)
 
+const fs = require('fs');
 const http = require('http');
 const crypto = require('crypto');
 const os = require('os');
@@ -82,9 +83,15 @@ const etcd_tree = {
             osd_idle_timeout: 5, // seconds. min: 1
             osd_ping_timeout: 5, // seconds. min: 1
             up_wait_retry_interval: 500, // ms. min: 50
+            max_etcd_attempts: 5,
+            etcd_quick_timeout: 1000, // ms
+            etcd_slow_timeout: 5000, // ms
+            etcd_keepalive_timeout: 30, // seconds, default is max(30, etcd_report_interval*2)
+            etcd_ws_keepalive_interval: 30, // seconds
             // osd
-            etcd_report_interval: 5,
+            etcd_report_interval: 5, // seconds
             run_primary: true,
+            osd_network: null, // "192.168.7.0/24" or an array of masks
             bind_address: "0.0.0.0",
             bind_port: 0,
             autosync_interval: 5,
@@ -97,6 +104,7 @@ const etcd_tree = {
             no_rebalance: false,
             print_stats_interval: 3,
             slow_log_interval: 10,
+            osd_memlock: false,
             // blockstore - fixed in superblock
             block_size,
             disk_alignment,
@@ -123,6 +131,11 @@ const etcd_tree = {
             inmemory_journal,
             journal_sector_buffer_count,
             journal_no_same_sector_overwrites,
+            throttle_small_writes: false,
+            throttle_target_iops: 100,
+            throttle_target_mbs: 100,
+            throttle_target_parallelism: 1,
+            throttle_threshold_us: 50,
         }, */
         global: {},
         /* node_placement: {
@@ -322,24 +335,56 @@ class Mon
 {
     constructor(config)
     {
-        // FIXME: Maybe prefer local etcd
-        this.etcd_urls = [];
-        for (let url of config.etcd_url.split(/,/))
+        this.die = (e) => this._die(e);
+        if (fs.existsSync(config.config_path||'/etc/vitastor/vitastor.conf'))
         {
-            let scheme = 'http';
-            url = url.trim().replace(/^(https?):\/\//, (m, m1) => { scheme = m1; return ''; });
-            if (!/\/[^\/]/.exec(url))
-                url += '/v3';
-            this.etcd_urls.push(scheme+'://'+url);
+            config = {
+                ...JSON.parse(fs.readFileSync(config.config_path||'/etc/vitastor/vitastor.conf', { encoding: 'utf-8' })),
+                ...config,
+            };
         }
+        this.parse_etcd_addresses(config.etcd_address||config.etcd_url);
         this.verbose = config.verbose || 0;
+        this.initConfig = config;
         this.config = {};
         this.etcd_prefix = config.etcd_prefix || '/vitastor';
         this.etcd_prefix = this.etcd_prefix.replace(/\/\/+/g, '/').replace(/^\/?(.*[^\/])\/?$/, '/$1');
         this.etcd_start_timeout = (config.etcd_start_timeout || 5) * 1000;
         this.state = JSON.parse(JSON.stringify(this.constructor.etcd_tree));
         this.signals_set = false;
-        this.on_stop_cb = () => this.on_stop().catch(console.error);
+        this.ws = null;
+        this.ws_alive = false;
+        this.ws_keepalive_timer = null;
+        this.on_stop_cb = () => this.on_stop(0).catch(console.error);
+    }
+
+    parse_etcd_addresses(addrs)
+    {
+        const is_local_ip = this.local_ips(true).reduce((a, c) => { a[c] = true; return a; }, {});
+        this.etcd_local = [];
+        this.etcd_urls = [];
+        this.selected_etcd_url = null;
+        this.etcd_urls_to_try = [];
+        if (!(addrs instanceof Array))
+            addrs = addrs ? (''+(addrs||'')).split(/,/) : [];
+        if (!addrs.length)
+        {
+            console.error('Vitastor etcd address(es) not specified. Please set on the command line or in the config file');
+            process.exit(1);
+        }
+        for (let url of addrs)
+        {
+            let scheme = 'http';
+            url = url.trim().replace(/^(https?):\/\//, (m, m1) => { scheme = m1; return ''; });
+            const slash = url.indexOf('/');
+            const colon = url.indexOf(':');
+            const is_local = is_local_ip[colon >= 0 ? url.substr(0, colon) : (slash >= 0 ? url.substr(0, slash) : url)];
+            url = scheme+'://'+(slash >= 0 ? url : url+'/v3');
+            if (is_local)
+                this.etcd_local.push(url);
+            else
+                this.etcd_urls.push(url);
+        }
     }
 
     async start()
@@ -352,7 +397,7 @@ class Mon
         for (const pool_id in this.state.config.pools)
         {
             if (!this.state.pool.stats[pool_id] ||
-                !this.state.pool.stats[pool_id].pg_real_size)
+                !Number(this.state.pool.stats[pool_id].pg_real_size))
             {
                 // Generate missing data in etcd
                 this.state.config.pgs.hash = null;
@@ -410,6 +455,43 @@ class Mon
         }
     }
 
+    pick_next_etcd()
+    {
+        if (this.selected_etcd_url)
+            return this.selected_etcd_url;
+        if (!this.etcd_urls_to_try || !this.etcd_urls_to_try.length)
+        {
+            this.etcd_urls_to_try = [ ...this.etcd_local ];
+            const others = [ ...this.etcd_urls ];
+            while (others.length)
+            {
+                const url = others.splice(0|(others.length*Math.random()), 1);
+                this.etcd_urls_to_try.push(url[0]);
+            }
+        }
+        this.selected_etcd_url = this.etcd_urls_to_try.shift();
+        return this.selected_etcd_url;
+    }
+
+    restart_watcher(cur_addr)
+    {
+        if (this.ws)
+        {
+            this.ws.close();
+            this.ws = null;
+        }
+        if (this.ws_keepalive_timer)
+        {
+            clearInterval(this.ws_keepalive_timer);
+            this.ws_keepalive_timer = null;
+        }
+        if (this.selected_etcd_url == cur_addr)
+        {
+            this.selected_etcd_url = null;
+        }
+        this.start_watcher(this.config.etcd_mon_retries).catch(this.die);
+    }
+
     async start_watcher(retries)
     {
         let retry = 0;
@@ -419,12 +501,14 @@ class Mon
         }
         while (retries < 0 || retry < retries)
         {
-            const base = 'ws'+this.etcd_urls[Math.floor(Math.random()*this.etcd_urls.length)].substr(4);
+            const cur_addr = this.pick_next_etcd();
+            const base = 'ws'+cur_addr.substr(4);
             const ok = await new Promise((ok, no) =>
             {
                 const timer_id = setTimeout(() =>
                 {
                     this.ws.close();
+                    this.ws = null;
                     ok(false);
                 }, this.config.etcd_mon_timeout);
                 this.ws = new WebSocket(base+'/watch');
@@ -442,9 +526,9 @@ class Mon
                 });
             });
             if (ok)
-            {
                 break;
-            }
+            if (this.selected_etcd_url == cur_addr)
+                this.selected_etcd_url = null;
             this.ws = null;
             retry++;
         }
@@ -452,6 +536,22 @@ class Mon
         {
             this.die('Failed to open etcd watch websocket');
         }
+        const cur_addr = this.selected_etcd_url;
+        this.ws_alive = true;
+        this.ws_keepalive_timer = setInterval(() =>
+        {
+            if (this.ws_alive)
+            {
+                this.ws_alive = false;
+                this.ws.send(JSON.stringify({ progress_request: {} }));
+            }
+            else
+            {
+                console.log('etcd websocket timed out, restarting it');
+                this.restart_watcher(cur_addr);
+            }
+        }, (Number(this.config.etcd_keepalive_interval) || 30)*1000);
+        this.ws.on('error', () => this.restart_watcher(cur_addr));
         this.ws.send(JSON.stringify({
             create_request: {
                 key: b64(this.etcd_prefix+'/'),
@@ -463,6 +563,7 @@ class Mon
         }));
         this.ws.on('message', (msg) =>
         {
+            this.ws_alive = true;
             let data;
             try
             {
@@ -471,12 +572,25 @@ class Mon
             catch (e)
             {
             }
-            if (!data || !data.result || !data.result.events)
+            if (!data || !data.result)
             {
-                if (!data || !data.result || !data.result.watch_id)
+                console.error('Unknown message received from watch websocket: '+msg);
+            }
+            else if (data.result.canceled)
+            {
+                // etcd watch canceled
+                if (data.result.compact_revision)
                 {
-                    console.error('Garbage received from watch websocket: '+msg);
+                    // we may miss events if we proceed
+                    console.error('Revisions before '+data.result.compact_revision+' were compacted by etcd, exiting');
+                    this.on_stop(1);
                 }
+                console.error('Watch canceled by etcd, reason: '+data.result.cancel_reason+', exiting');
+                this.on_stop(1);
+            }
+            else if (data.result.created)
+            {
+                // etcd watch created
             }
             else
             {
@@ -486,7 +600,7 @@ class Mon
                     console.log('Revision '+data.result.header.revision+' events: ');
                 }
                 this.etcd_watch_revision = BigInt(data.result.header.revision)+BigInt(1);
-                for (const e of data.result.events)
+                for (const e of data.result.events||[])
                 {
                     this.parse_kv(e.kv);
                     const key = e.kv.key.substr(this.etcd_prefix.length);
@@ -509,7 +623,7 @@ class Mon
                 }
                 if (pg_states_changed)
                 {
-                    this.save_last_clean().catch(console.error);
+                    this.save_last_clean().catch(this.die);
                 }
                 if (stats_changed)
                 {
@@ -580,11 +694,11 @@ class Mon
         }
     }
 
-    async on_stop()
+    async on_stop(status)
     {
         clearInterval(this.lease_timer);
         await this.etcd_call('/lease/revoke', { ID: this.etcd_lease_id }, this.config.etcd_mon_timeout, this.config.etcd_mon_retries);
-        process.exit(0);
+        process.exit(status);
     }
 
     async become_master()
@@ -637,10 +751,13 @@ class Mon
         for (const node_id in this.state.config.node_placement||{})
         {
             const node_cfg = this.state.config.node_placement[node_id];
-            if (!node_id || /^\d/.exec(node_id) ||
-                !node_cfg.level || !levels[node_cfg.level])
+            if (/^\d+$/.exec(node_id))
             {
-                // All nodes must have non-empty non-numeric IDs and valid levels
+                node_cfg.level = 'osd';
+            }
+            if (!node_id || !node_cfg.level || !levels[node_cfg.level])
+            {
+                // All nodes must have non-empty IDs and valid levels
                 continue;
             }
             tree[node_id] = { id: node_id, level: node_cfg.level, parent: node_cfg.parent, children: [] };
@@ -673,10 +790,10 @@ class Mon
                         .reduce((a, c) => { a[c] = true; return a; }, {});
                 }
                 delete tree[osd_num].children;
-                if (!tree[tree[osd_num].parent])
+                if (!tree[stat.host])
                 {
-                    tree[tree[osd_num].parent] = {
-                        id: tree[osd_num].parent,
+                    tree[stat.host] = {
+                        id: stat.host,
                         level: 'host',
                         parent: null,
                         children: [],
@@ -1022,6 +1139,7 @@ class Mon
                     pg_size: pool_cfg.pg_size,
                     pg_minsize: pool_cfg.pg_minsize,
                     max_combinations: pool_cfg.max_osd_combinations,
+                    ordered: pool_cfg.scheme != 'replicated',
                 };
                 let optimize_result;
                 if (old_pg_count > 0)
@@ -1044,10 +1162,6 @@ class Mon
                         {
                             pg.push(0);
                         }
-                        while (pg.length > pool_cfg.pg_size)
-                        {
-                            pg.pop();
-                        }
                     }
                     if (!this.state.config.pgs.hash)
                     {
@@ -1083,8 +1197,8 @@ class Mon
                 this.state.pool.stats[pool_id] = {
                     used_raw_tb: (this.state.pool.stats[pool_id]||{}).used_raw_tb || 0,
                     total_raw_tb: optimize_result.space,
-                    pg_real_size: pg_effsize,
-                    raw_to_usable: pg_effsize / (pool_cfg.scheme === 'replicated'
+                    pg_real_size: pg_effsize || pool_cfg.pg_size,
+                    raw_to_usable: (pg_effsize || pool_cfg.pg_size) / (pool_cfg.scheme === 'replicated'
                         ? 1 : (pool_cfg.pg_size - (pool_cfg.parity_chunks||0))),
                     space_efficiency: optimize_result.space/(optimize_result.total_space||1),
                 };
@@ -1194,7 +1308,7 @@ class Mon
         this.recheck_timer = setTimeout(() =>
         {
             this.recheck_timer = null;
-            this.recheck_pgs().catch(console.error);
+            this.recheck_pgs().catch(this.die);
         }, this.config.mon_change_timeout || 1000);
     }
 
@@ -1341,6 +1455,7 @@ class Mon
         {
             for (const inode_num in inode_stats[pool_id])
             {
+                let nonzero = inode_stats[pool_id][inode_num].raw_used > 0;
                 for (const op of [ 'read', 'write', 'delete' ])
                 {
                     const op_st = inode_stats[pool_id][inode_num][op];
@@ -1348,6 +1463,13 @@ class Mon
                     op_st.bps = prev_st ? (op_st.bytes - prev_st.bytes) * 1000n / tm : 0;
                     op_st.iops = prev_st ? (op_st.count - prev_st.count) * 1000n / tm : 0;
                     op_st.lat = prev_st ? (op_st.usec - prev_st.usec) / ((op_st.count - prev_st.count) || 1n) : 0;
+                    if (op_st.bps > 0 || op_st.iops > 0 || op_st.lat > 0)
+                        nonzero = true;
+                }
+                if (!nonzero && (!this.state.config.inode[pool_id] || !this.state.config.inode[pool_id][inode_num]))
+                {
+                    // Deleted inode (no data, no I/O, no config)
+                    delete inode_stats[pool_id][inode_num];
                 }
             }
         }
@@ -1396,6 +1518,18 @@ class Mon
                 } });
             }
         }
+        for (const pool_id in this.state.inode.stats)
+        {
+            for (const inode_num in this.state.inode.stats[pool_id])
+            {
+                if (!inode_stats[pool_id] || !inode_stats[pool_id][inode_num])
+                {
+                    txn.push({ requestDeleteRange: {
+                        key: b64(this.etcd_prefix+'/inode/stats/'+pool_id+'/'+inode_num),
+                    } });
+                }
+            }
+        }
         for (const pool_id in this.state.pool.stats)
         {
             const pool_stats = { ...this.state.pool.stats[pool_id] };
@@ -1461,7 +1595,7 @@ class Mon
         cur[key_parts[key_parts.length-1]] = kv.value;
         if (key === 'config/global')
         {
-            this.config = this.state.config.global;
+            this.config = { ...this.initConfig, ...this.state.config.global };
             this.check_config();
             for (const osd_num in this.state.osd.stats)
             {
@@ -1498,12 +1632,15 @@ class Mon
         }
         while (retries < 0 || retry < retries)
         {
-            const base = this.etcd_urls[Math.floor(Math.random()*this.etcd_urls.length)];
+            retry++;
+            const base = this.pick_next_etcd();
             const res = await POST(base+path, body, timeout);
             if (res.error)
             {
-                console.error('etcd returned error: '+res.error);
-                break;
+                if (this.selected_etcd_url == base)
+                    this.selected_etcd_url = null;
+                console.error('failed to query etcd: '+res.error);
+                continue;
             }
             if (res.json)
             {
@@ -1512,26 +1649,20 @@ class Mon
                     console.error('etcd returned error: '+res.json.error);
                     break;
                 }
-                if (this.etcd_urls.length > 1)
-                {
-                    // Stick to the same etcd for the rest of calls
-                    this.etcd_urls = [ base ];
-                }
                 return res.json;
             }
-            retry++;
         }
         this.die();
     }
 
-    die(err)
+    _die(err)
     {
         // In fact we can just try to rejoin
         console.error(new Error(err || 'Cluster connection failed'));
         process.exit(1);
     }
 
-    local_ips()
+    local_ips(all)
     {
         const ips = [];
         const ifaces = os.networkInterfaces();
@@ -1539,7 +1670,7 @@ class Mon
         {
             for (const iface of ifaces[ifname])
             {
-                if (iface.family == 'IPv4' && !iface.internal)
+                if (iface.family == 'IPv4' && !iface.internal || all)
                 {
                     ips.push(iface.address);
                 }

mon/test-optimize-simple.js

@@ -5,21 +5,45 @@ const LPOptimizer = require('./lp-optimizer.js');
 
 async function run()
 {
-    const osd_tree = { a: { 1: 1 }, b: { 2: 1 }, c: { 3: 1 } };
+    const osd_tree = {
+        100: { 1: 1 },
+        200: { 2: 1 },
+        300: { 3: 1 },
+    };
+
     let res;
 
     console.log('16 PGs, size=3');
-    res = await LPOptimizer.optimize_initial({ osd_tree, pg_size: 3, pg_count: 16 });
+    res = await LPOptimizer.optimize_initial({ osd_tree, pg_size: 3, pg_count: 16, ordered: false });
     LPOptimizer.print_change_stats(res, false);
-
-    console.log('\nReduce PG size to 2');
-    res = await LPOptimizer.optimize_change({ prev_pgs: res.int_pgs.map(pg => pg.slice(0, 2)), osd_tree, pg_size: 2 });
+    assert(res.space == 3, 'Initial distribution');
+    console.log('\nChange size to 2');
+    res = await LPOptimizer.optimize_change({ prev_pgs: res.int_pgs, osd_tree, pg_size: 2, ordered: false });
     LPOptimizer.print_change_stats(res, false);
-
+    assert(res.space >= 3*14/16 && res.osd_differs == 0, 'Redistribution');
     console.log('\nRemove OSD 3');
-    delete osd_tree['c'];
-    res = await LPOptimizer.optimize_change({ prev_pgs: res.int_pgs, osd_tree, pg_size: 2 });
+    const no3_tree = { ...osd_tree };
+    delete no3_tree['300'];
+    res = await LPOptimizer.optimize_change({ prev_pgs: res.int_pgs, osd_tree: no3_tree, pg_size: 2, ordered: false });
     LPOptimizer.print_change_stats(res, false);
+    assert(res.space == 2, 'Redistribution after OSD removal');
+
+    console.log('\n16 PGs, size=3, ordered');
+    res = await LPOptimizer.optimize_initial({ osd_tree, pg_size: 3, pg_count: 16, ordered: true });
+    LPOptimizer.print_change_stats(res, false);
+    assert(res.space == 3, 'Initial distribution');
+    console.log('\nChange size to 2, ordered');
+    res = await LPOptimizer.optimize_change({ prev_pgs: res.int_pgs, osd_tree, pg_size: 2, ordered: true });
+    LPOptimizer.print_change_stats(res, false);
+    assert(res.space >= 3*14/16 && res.osd_differs < 8, 'Redistribution');
+}
+
+function assert(cond, txt)
+{
+    if (!cond)
+    {
+        throw new Error((txt||'test')+' failed');
+    }
 }
 
 run().catch(console.error);

mon/test-optimize-undersized.js

@@ -45,30 +45,45 @@ async function run()
     console.log('Empty tree:');
     let res = await LPOptimizer.optimize_initial({ osd_tree: cur_tree, pg_size: 3, pg_count: 256 });
     LPOptimizer.print_change_stats(res, false);
+    assert(res.space == 0);
     console.log('\nAdding 1st failure domain:');
     cur_tree['dom1'] = osd_tree['dom1'];
     res = await LPOptimizer.optimize_change({ prev_pgs: res.int_pgs, osd_tree: cur_tree, pg_size: 3 });
     LPOptimizer.print_change_stats(res, false);
+    assert(res.space == 12 && res.total_space == 12);
     console.log('\nAdding 2nd failure domain:');
     cur_tree['dom2'] = osd_tree['dom2'];
     res = await LPOptimizer.optimize_change({ prev_pgs: res.int_pgs, osd_tree: cur_tree, pg_size: 3 });
     LPOptimizer.print_change_stats(res, false);
+    assert(res.space == 24 && res.total_space == 24);
     console.log('\nAdding 3rd failure domain:');
     cur_tree['dom3'] = osd_tree['dom3'];
     res = await LPOptimizer.optimize_change({ prev_pgs: res.int_pgs, osd_tree: cur_tree, pg_size: 3 });
     LPOptimizer.print_change_stats(res, false);
+    assert(res.space == 36 && res.total_space == 36);
     console.log('\nRemoving 3rd failure domain:');
     delete cur_tree['dom3'];
     res = await LPOptimizer.optimize_change({ prev_pgs: res.int_pgs, osd_tree: cur_tree, pg_size: 3 });
     LPOptimizer.print_change_stats(res, false);
+    assert(res.space == 24 && res.total_space == 24);
     console.log('\nRemoving 2nd failure domain:');
     delete cur_tree['dom2'];
     res = await LPOptimizer.optimize_change({ prev_pgs: res.int_pgs, osd_tree: cur_tree, pg_size: 3 });
     LPOptimizer.print_change_stats(res, false);
+    assert(res.space == 12 && res.total_space == 12);
     console.log('\nRemoving 1st failure domain:');
     delete cur_tree['dom1'];
     res = await LPOptimizer.optimize_change({ prev_pgs: res.int_pgs, osd_tree: cur_tree, pg_size: 3 });
     LPOptimizer.print_change_stats(res, false);
+    assert(res.space == 0);
+}
+
+function assert(cond, txt)
+{
+    if (!cond)
+    {
+        throw new Error((txt||'test')+' failed');
+    }
 }
 
 run().catch(console.error);

mon/test-optimize-unfeasible.js

@@ -0,0 +1,33 @@
+// Copyright (c) Vitaliy Filippov, 2019+
+// License: VNPL-1.1 (see README.md for details)
+
+const LPOptimizer = require('./lp-optimizer.js');
+
+const osd_tree = {
+    100: {
+        1: 0.1,
+        2: 0.1,
+        3: 0.1,
+    },
+    200: {
+        4: 0.1,
+        5: 0.1,
+        6: 0.1,
+    },
+};
+
+async function run()
+{
+    let res;
+    console.log('256 PGs, 3+3 OSDs, size=2');
+    res = await LPOptimizer.optimize_initial({ osd_tree, pg_size: 2, pg_count: 256 });
+    LPOptimizer.print_change_stats(res, false);
+
+    // Should NOT fail with the "unfeasible or unbounded" exception
+    console.log('\nRemoving osd.2');
+    delete osd_tree[100][2];
+    res = await LPOptimizer.optimize_change({ prev_pgs: res.int_pgs, osd_tree, pg_size: 2 });
+    LPOptimizer.print_change_stats(res, false);
+}
+
+run().catch(console.error);

patches/PVE_VitastorPlugin.pm

@@ -0,0 +1,503 @@
+# Install as /usr/share/perl5/PVE/Storage/Custom/VitastorPlugin.pm
+
+# Proxmox Vitastor Driver
+# Copyright (c) Vitaliy Filippov, 2021+
+# License: VNPL-1.1 or GNU AGPLv3.0
+
+package PVE::Storage::Custom::VitastorPlugin;
+
+use strict;
+use warnings;
+
+use JSON;
+
+use PVE::Storage::Plugin;
+use PVE::Tools qw(run_command);
+
+use base qw(PVE::Storage::Plugin);
+
+sub api
+{
+    # Trick it :)
+    return PVE::Storage->APIVER;
+}
+
+sub run_cli
+{
+    my ($scfg, $cmd, %args) = @_;
+    my $retval;
+    my $stderr = '';
+    my $errmsg = $args{errmsg} ? $args{errmsg}.": " : "vitastor-cli error: ";
+    my $json = delete $args{json};
+    $json = 1 if !defined $json;
+    my $binary = delete $args{binary};
+    $binary = '/usr/bin/vitastor-cli' if !defined $binary;
+    if (!exists($args{errfunc}))
+    {
+        $args{errfunc} = sub
+        {
+            my $line = shift;
+            print STDERR $line;
+            *STDERR->flush();
+            $stderr .= $line;
+        };
+    }
+    if (!exists($args{outfunc}))
+    {
+        $retval = '';
+        $args{outfunc} = sub { $retval .= shift };
+        if ($json)
+        {
+            unshift @$cmd, '--json';
+        }
+    }
+    if ($scfg->{vitastor_etcd_address})
+    {
+        unshift @$cmd, '--etcd_address', $scfg->{vitastor_etcd_address};
+    }
+    if ($scfg->{vitastor_config_path})
+    {
+        unshift @$cmd, '--config_path', $scfg->{vitastor_config_path};
+    }
+    unshift @$cmd, $binary;
+    eval { run_command($cmd, %args); };
+    if (my $err = $@)
+    {
+        die "Error invoking vitastor-cli: $err";
+    }
+    if (defined $retval)
+    {
+        # untaint
+        $retval =~ /^(.*)$/s;
+        if ($json)
+        {
+            eval { $retval = JSON::decode_json($1); };
+            if ($@)
+            {
+                die "vitastor-cli returned bad JSON: $@";
+            }
+        }
+        else
+        {
+            $retval = $1;
+        }
+    }
+    return $retval;
+}
+
+# Configuration
+
+sub type
+{
+    return 'vitastor';
+}
+
+sub plugindata
+{
+    return {
+        content => [ { images => 1, rootdir => 1 }, { images => 1 } ],
+    };
+}
+
+sub properties
+{
+    return {
+        vitastor_etcd_address => {
+            description => 'IP address(es) of etcd.',
+            type => 'string',
+            format => 'pve-storage-portal-dns-list',
+        },
+        vitastor_etcd_prefix => {
+            description => 'Prefix for Vitastor etcd metadata',
+            type => 'string',
+        },
+        vitastor_config_path => {
+            description => 'Path to Vitastor configuration file',
+            type => 'string',
+        },
+        vitastor_prefix => {
+            description => 'Image name prefix',
+            type => 'string',
+        },
+        vitastor_pool => {
+            description => 'Default pool to use for images',
+            type => 'string',
+        },
+        vitastor_nbd => {
+            description => 'Use kernel NBD devices (slower)',
+            type => 'boolean',
+        },
+    };
+}
+
+sub options
+{
+    return {
+        nodes => { optional => 1 },
+        disable => { optional => 1 },
+        vitastor_etcd_address => { optional => 1},
+        vitastor_etcd_prefix => { optional => 1 },
+        vitastor_config_path => { optional => 1 },
+        vitastor_prefix => { optional => 1 },
+        vitastor_pool => {},
+        vitastor_nbd => { optional => 1 },
+    };
+}
+
+# Storage implementation
+
+sub parse_volname
+{
+    my ($class, $volname) = @_;
+    if ($volname =~ m/^((base-(\d+)-\S+)\/)?((?:(base)|(vm))-(\d+)-\S+)$/)
+    {
+        # ($vtype, $name, $vmid, $basename, $basevmid, $isBase, $format)
+        return ('images', $4, $7, $2, $3, $5, 'raw');
+    }
+    die "unable to parse vitastor volume name '$volname'\n";
+}
+
+sub _qemu_option
+{
+    my ($k, $v) = @_;
+    if (defined $v && $v ne "")
+    {
+        $v =~ s/:/\\:/gso;
+        return ":$k=$v";
+    }
+    return "";
+}
+
+sub path
+{
+    my ($class, $scfg, $volname, $storeid, $snapname) = @_;
+    my $prefix = defined $scfg->{vitastor_prefix} ? $scfg->{vitastor_prefix} : 'pve/';
+    my ($vtype, $name, $vmid) = $class->parse_volname($volname);
+    $name .= '@'.$snapname if $snapname;
+    if ($scfg->{vitastor_nbd})
+    {
+        my $mapped = run_cli($scfg, [ 'ls' ], binary => '/usr/bin/vitastor-nbd');
+        my ($kerneldev) = grep { $mapped->{$_}->{image} eq $prefix.$name } keys %$mapped;
+        die "Image not mapped via NBD" if !$kerneldev;
+        return ($kerneldev, $vmid, $vtype);
+    }
+    my $path = "vitastor";
+    $path .= _qemu_option('config_path', $scfg->{vitastor_config_path});
+    # FIXME This is the only exception: etcd_address -> etcd_host for qemu
+    $path .= _qemu_option('etcd_host', $scfg->{vitastor_etcd_address});
+    $path .= _qemu_option('etcd_prefix', $scfg->{vitastor_etcd_prefix});
+    $path .= _qemu_option('image', $prefix.$name);
+    return ($path, $vmid, $vtype);
+}
+
+sub _find_free_diskname
+{
+    my ($class, $storeid, $scfg, $vmid, $fmt, $add_fmt_suffix) = @_;
+    my $list = _process_list($scfg, $storeid, run_cli($scfg, [ 'ls' ]));
+    $list = [ map { $_->{name} } @$list ];
+    return PVE::Storage::Plugin::get_next_vm_diskname($list, $storeid, $vmid, undef, $scfg);
+}
+
+# Used only in "Create Template" and, in fact, converts a VM into a template
+# As a consequence, this is always invoked with the VM powered off
+# So we just rename vm-xxx to base-xxx and make it a readonly base layer
+sub create_base
+{
+    my ($class, $storeid, $scfg, $volname) = @_;
+    my $prefix = defined $scfg->{vitastor_prefix} ? $scfg->{vitastor_prefix} : 'pve/';
+
+    my ($vtype, $name, $vmid, $basename, $basevmid, $isBase) = $class->parse_volname($volname);
+    die "create_base not possible with base image\n" if $isBase;
+
+    my $info = _process_list($scfg, $storeid, run_cli($scfg, [ 'ls', $prefix.$name ]))->[0];
+    die "image $name does not exist\n" if !$info;
+
+    die "volname '$volname' contains wrong information about parent {$info->{parent}} $basename\n"
+        if $basename && (!$info->{parent} || $info->{parent} ne $basename);
+
+    my $newname = $name;
+    $newname =~ s/^vm-/base-/;
+
+    my $newvolname = $basename ? "$basename/$newname" : "$newname";
+    run_cli($scfg, [ 'modify', '--rename', $prefix.$newname, '--readonly', $prefix.$name ], json => 0);
+
+    return $newvolname;
+}
+
+sub clone_image
+{
+    my ($class, $scfg, $storeid, $volname, $vmid, $snapname) = @_;
+    my $prefix = defined $scfg->{vitastor_prefix} ? $scfg->{vitastor_prefix} : 'pve/';
+
+    my $snap = '';
+    $snap = '@'.$snapname if length $snapname;
+
+    my ($vtype, $basename, $basevmid, undef, undef, $isBase) = $class->parse_volname($volname);
+    die "$volname is not a base image and snapname is not provided\n" if !$isBase && !length($snapname);
+
+    my $name = $class->find_free_diskname($storeid, $scfg, $vmid);
+
+    warn "clone $volname: $basename snapname $snap to $name\n";
+
+    my $newvol = "$basename/$name";
+    $newvol = $name if length($snapname);
+
+    run_cli($scfg, [ 'create', '--parent', $prefix.$basename.$snap, $prefix.$name ], json => 0);
+
+    return $newvol;
+}
+
+sub alloc_image
+{
+    # $size is in kb in this method
+    my ($class, $storeid, $scfg, $vmid, $fmt, $name, $size) = @_;
+    my $prefix = defined $scfg->{vitastor_prefix} ? $scfg->{vitastor_prefix} : 'pve/';
+    die "illegal name '$name' - should be 'vm-$vmid-*'\n" if $name && $name !~ m/^vm-$vmid-/;
+    $name = $class->find_free_diskname($storeid, $scfg, $vmid) if !$name;
+    run_cli($scfg, [ 'create', '--size', (int(($size+3)/4)*4).'k', '--pool', $scfg->{vitastor_pool}, $prefix.$name ], json => 0);
+    return $name;
+}
+
+sub free_image
+{
+    my ($class, $storeid, $scfg, $volname, $isBase) = @_;
+    my $prefix = defined $scfg->{vitastor_prefix} ? $scfg->{vitastor_prefix} : 'pve/';
+    my ($vtype, $name, $vmid, undef, undef, undef) = $class->parse_volname($volname);
+    $class->deactivate_volume($storeid, $scfg, $volname);
+    my $full_list = run_cli($scfg, [ 'ls', '-l' ]);
+    my $list = _process_list($scfg, $storeid, $full_list);
+    # Remove image and all its snapshots
+    my $rm_names = {
+        map { ($prefix.$_->{name} => 1) }
+        grep { $_->{name} eq $name || substr($_->{name}, 0, length($name)+1) eq ($name.'@') }
+        @$list
+    };
+    my $children = [ grep { $_->{parent_name} && $rm_names->{$_->{parent_name}} } @$full_list ];
+    die "Image has children: ".join(', ', map {
+        substr($_->{name}, 0, length $prefix) eq $prefix
+            ? substr($_->name, length $prefix)
+            : $_->{name}
+    } @$children)."\n" if @$children;
+    my $to_remove = [ grep { $rm_names->{$_->{name}} } @$full_list ];
+    for my $rmi (@$to_remove)
+    {
+        run_cli($scfg, [ 'rm-data', '--pool', $rmi->{pool_id}, '--inode', $rmi->{inode_num} ], json => 0);
+    }
+    for my $rmi (@$to_remove)
+    {
+        run_cli($scfg, [ 'rm', $rmi->{name} ], json => 0);
+    }
+    return undef;
+}
+
+sub _process_list
+{
+    my ($scfg, $storeid, $result) = @_;
+    my $prefix = defined $scfg->{vitastor_prefix} ? $scfg->{vitastor_prefix} : 'pve/';
+    my $list = [];
+    foreach my $el (@$result)
+    {
+        next if !$el->{name} || length($prefix) && substr($el->{name}, 0, length $prefix) ne $prefix;
+        my $name = substr($el->{name}, length $prefix);
+        next if $name =~ /@/;
+        my ($owner) = $name =~ /^(?:vm|base)-(\d+)-/s;
+        next if !defined $owner;
+        my $parent = !defined $el->{parent_name}
+            ? undef
+            : ($prefix eq '' || substr($el->{parent_name}, 0, length $prefix) eq $prefix
+                ? substr($el->{parent_name}, length $prefix) : '');
+        my $volid = $parent && $parent =~ /^(base-\d+-\S+)$/s
+            ? "$storeid:$1/$name" : "$storeid:$name";
+        push @$list, {
+            format => 'raw',
+            volid => $volid,
+            name => $name,
+            size => $el->{size},
+            parent => $parent,
+            vmid => $owner,
+        };
+    }
+    return $list;
+}
+
+sub list_images
+{
+    my ($class, $storeid, $scfg, $vmid, $vollist, $cache) = @_;
+    my $list = _process_list($scfg, $storeid, run_cli($scfg, [ 'ls', '-l' ]));
+    if ($vollist)
+    {
+        my $h = { map { ($_ => 1) } @$vollist };
+        $list = [ grep { $h->{$_->{volid}} } @$list ]
+    }
+    elsif (defined $vmid)
+    {
+        $list = [ grep { $_->{vmid} eq $vmid } @$list ];
+    }
+    return $list;
+}
+
+sub status
+{
+    my ($class, $storeid, $scfg, $cache) = @_;
+    my $stats = [ grep { $_->{name} eq $scfg->{vitastor_pool} } @{ run_cli($scfg, [ 'df' ]) } ]->[0];
+    my $free = $stats ? $stats->{max_available} : 0;
+    my $used = $stats ? $stats->{used_raw}/($stats->{raw_to_usable}||1) : 0;
+    my $total = $free+$used;
+    my $active = $stats ? 1 : 0;
+    return ($total, $free, $used, $active);
+}
+
+sub activate_storage
+{
+    my ($class, $storeid, $scfg, $cache) = @_;
+    return 1;
+}
+
+sub deactivate_storage
+{
+    my ($class, $storeid, $scfg, $cache) = @_;
+    return 1;
+}
+
+sub map_volume
+{
+    my ($class, $storeid, $scfg, $volname, $snapname) = @_;
+    my $prefix = defined $scfg->{vitastor_prefix} ? $scfg->{vitastor_prefix} : 'pve/';
+
+    my ($vtype, $img_name, $vmid) = $class->parse_volname($volname);
+    my $name = $img_name;
+    $name .= '@'.$snapname if $snapname;
+
+    my $mapped = run_cli($scfg, [ 'ls' ], binary => '/usr/bin/vitastor-nbd');
+    my ($kerneldev) = grep { $mapped->{$_}->{image} eq $prefix.$name } keys %$mapped;
+    return $kerneldev if $kerneldev && -b $kerneldev; # already mapped
+
+    $kerneldev = run_cli($scfg, [ 'map', '--image', $prefix.$name ], binary => '/usr/bin/vitastor-nbd', json => 0);
+    return $kerneldev;
+}
+
+sub unmap_volume
+{
+    my ($class, $storeid, $scfg, $volname, $snapname) = @_;
+    my $prefix = defined $scfg->{vitastor_prefix} ? $scfg->{vitastor_prefix} : 'pve/';
+
+    return 1 if !$scfg->{vitastor_nbd};
+
+    my ($vtype, $name, $vmid) = $class->parse_volname($volname);
+    $name .= '@'.$snapname if $snapname;
+
+    my $mapped = run_cli($scfg, [ 'ls' ], binary => '/usr/bin/vitastor-nbd');
+    my ($kerneldev) = grep { $mapped->{$_}->{image} eq $prefix.$name } keys %$mapped;
+    if ($kerneldev && -b $kerneldev)
+    {
+        run_cli($scfg, [ 'unmap', $kerneldev ], binary => '/usr/bin/vitastor-nbd', json => 0);
+    }
+
+    return 1;
+}
+
+sub activate_volume
+{
+    my ($class, $storeid, $scfg, $volname, $snapname, $cache) = @_;
+    $class->map_volume($storeid, $scfg, $volname, $snapname) if $scfg->{vitastor_nbd};
+    return 1;
+}
+
+sub deactivate_volume
+{
+    my ($class, $storeid, $scfg, $volname, $snapname, $cache) = @_;
+    $class->unmap_volume($storeid, $scfg, $volname, $snapname);
+    return 1;
+}
+
+sub volume_size_info
+{
+    my ($class, $scfg, $storeid, $volname, $timeout) = @_;
+    my $prefix = defined $scfg->{vitastor_prefix} ? $scfg->{vitastor_prefix} : 'pve/';
+    my ($vtype, $name, $vmid) = $class->parse_volname($volname);
+    my $info = _process_list($scfg, $storeid, run_cli($scfg, [ 'ls', $prefix.$name ]))->[0];
+    #return wantarray ? ($size, $format, $used, $parent, $st->ctime) : $size;
+    return $info->{size};
+}
+
+sub volume_resize
+{
+    my ($class, $scfg, $storeid, $volname, $size, $running) = @_;
+    my $prefix = defined $scfg->{vitastor_prefix} ? $scfg->{vitastor_prefix} : 'pve/';
+    my ($vtype, $name, $vmid) = $class->parse_volname($volname);
+    # $size is in bytes in this method
+    run_cli($scfg, [ 'modify', '--resize', (int(($size+4095)/4096)*4).'k', $prefix.$name ], json => 0);
+    return undef;
+}
+
+sub volume_snapshot
+{
+    my ($class, $scfg, $storeid, $volname, $snap) = @_;
+    my $prefix = defined $scfg->{vitastor_prefix} ? $scfg->{vitastor_prefix} : 'pve/';
+    my ($vtype, $name, $vmid) = $class->parse_volname($volname);
+    run_cli($scfg, [ 'create', '--snapshot', $snap, $prefix.$name ], json => 0);
+    return undef;
+}
+
+sub volume_snapshot_rollback
+{
+    my ($class, $scfg, $storeid, $volname, $snap) = @_;
+    my $prefix = defined $scfg->{vitastor_prefix} ? $scfg->{vitastor_prefix} : 'pve/';
+    my ($vtype, $name, $vmid) = $class->parse_volname($volname);
+    run_cli($scfg, [ 'rm', $prefix.$name ], json => 0);
+    run_cli($scfg, [ 'create', '--parent', $prefix.$name.'@'.$snap, $prefix.$name ], json => 0);
+    return undef;
+}
+
+sub volume_snapshot_delete
+{
+    my ($class, $scfg, $storeid, $volname, $snap, $running) = @_;
+    my $prefix = defined $scfg->{vitastor_prefix} ? $scfg->{vitastor_prefix} : 'pve/';
+    my ($vtype, $name, $vmid) = $class->parse_volname($volname);
+    run_cli($scfg, [ 'rm', $prefix.$name.'@'.$snap ], json => 0);
+    return undef;
+}
+
+sub volume_snapshot_needs_fsfreeze
+{
+    return 1;
+}
+
+sub volume_has_feature
+{
+    my ($class, $scfg, $feature, $storeid, $volname, $snapname, $running) = @_;
+    my $features = {
+        snapshot => { current => 1, snap => 1 },
+        clone => { base => 1, snap => 1 },
+        template => { current => 1 },
+        copy => { base => 1, current => 1, snap => 1 },
+        sparseinit => { base => 1, current => 1 },
+        rename => { current => 1 },
+    };
+    my ($vtype, $name, $vmid, $basename, $basevmid, $isBase) = $class->parse_volname($volname);
+    my $key = undef;
+    if ($snapname)
+    {
+        $key = 'snap';
+    }
+    else
+    {
+        $key = $isBase ? 'base' : 'current';
+    }
+    return 1 if $features->{$feature}->{$key};
+    return undef;
+}
+
+sub rename_volume
+{
+    my ($class, $scfg, $storeid, $source_volname, $target_vmid, $target_volname) = @_;
+    my $prefix = defined $scfg->{vitastor_prefix} ? $scfg->{vitastor_prefix} : 'pve/';
+    my (undef, $source_image, $source_vmid, $base_name, $base_vmid, undef, $format) =
+        $class->parse_volname($source_volname);
+    $target_volname = $class->find_free_diskname($storeid, $scfg, $target_vmid, $format) if !$target_volname;
+    run_cli($scfg, [ 'modify', '--rename', $prefix.$target_volname, $prefix.$source_image ], json => 0);
+    $base_name = $base_name ? "${base_name}/" : '';
+    return "${storeid}:${base_name}${target_volname}";
+}
+
+1;

patches/cinder-vitastor.py

@@ -50,7 +50,7 @@ from cinder.volume import configuration
 from cinder.volume import driver
 from cinder.volume import volume_utils
 
-VERSION = '0.6.8'
+VERSION = '0.6.12'
 
 LOG = logging.getLogger(__name__)
 
@@ -489,7 +489,7 @@ class VitastorDriver(driver.CloneableImageVD,
                 # FIXME use etcd_address in qemu driver
                 kk = 'etcd_host'
             if v:
-                args += ':'+kk+'='+v.replace(':', '\\:')
+                args += ':'+kk.replace('_', '-')+'='+v.replace(':', '\\:')
         return args
 
     def delete_volume(self, volume):
@@ -658,8 +658,8 @@ class VitastorDriver(driver.CloneableImageVD,
                 'etcd_address': self.configuration.vitastor_etcd_address,
                 'etcd_prefix': self.configuration.vitastor_etcd_prefix,
                 'name': volume.name,
-                'logical_block_size': 512,
-                'physical_block_size': 4096,
+                'logical_block_size': '512',
+                'physical_block_size': '4096',
             }
         }
         LOG.debug('connection data: %s', data)

patches/libvirt-5.0-vitastor.diff

@@ -1,4 +1,4 @@
-commit bd283191b3e7a4c6d1c100d3d96e348a1ebffe55
+commit 7f01510ef207940b07fac4f5fc8b9f1580b443aa
 Author: Vitaliy Filippov <vitalif@yourcmc.ru>
 Date:   Sun Jun 27 12:52:40 2021 +0300
 
@@ -65,10 +65,38 @@ index 4bf2b5f..dbc011b 100644
  
  int                     virConnectListAllStoragePools(virConnectPtr conn,
 diff --git a/src/conf/domain_conf.c b/src/conf/domain_conf.c
-index 222bb8c..685d255 100644
+index 222bb8c..2c30c55 100644
 --- a/src/conf/domain_conf.c
 +++ b/src/conf/domain_conf.c
-@@ -8653,6 +8653,10 @@ virDomainDiskSourceNetworkParse(xmlNodePtr node,
+@@ -4667,8 +4667,7 @@ virDomainDeviceDefPostParseCommon(virDomainDeviceDefPtr dev,
+     if (dev->type == VIR_DOMAIN_DEVICE_DISK) {
+         virDomainDiskDefPtr disk = dev->data.disk;
+ 
+-        /* internal snapshots and config files are currently supported
+-         * only with rbd: */
++        /* internal snapshots are currently supported only with rbd: */
+         if (virStorageSourceGetActualType(disk->src) != VIR_STORAGE_TYPE_NETWORK &&
+             disk->src->protocol != VIR_STORAGE_NET_PROTOCOL_RBD) {
+             if (disk->src->snapshot) {
+@@ -4677,11 +4676,15 @@ virDomainDeviceDefPostParseCommon(virDomainDeviceDefPtr dev,
+                                  "only with 'rbd' disks"));
+                 return -1;
+             }
+-
++        }
++        /* config files are currently supported only with rbd and vitastor: */
++        if (virStorageSourceGetActualType(disk->src) != VIR_STORAGE_TYPE_NETWORK &&
++            disk->src->protocol != VIR_STORAGE_NET_PROTOCOL_RBD &&
++            disk->src->protocol != VIR_STORAGE_NET_PROTOCOL_VITASTOR) {
+             if (disk->src->configFile) {
+                 virReportError(VIR_ERR_XML_ERROR, "%s",
+                                _("<config> element is currently supported "
+-                                 "only with 'rbd' disks"));
++                                 "only with 'rbd' and 'vitastor' disks"));
+                 return -1;
+             }
+         }
+@@ -8653,6 +8656,10 @@ virDomainDiskSourceNetworkParse(xmlNodePtr node,
          goto cleanup;
      }
  
@@ -79,7 +107,7 @@ index 222bb8c..685d255 100644
      if ((haveTLS = virXMLPropString(node, "tls")) &&
          (src->haveTLS = virTristateBoolTypeFromString(haveTLS)) <= 0) {
          virReportError(VIR_ERR_XML_ERROR,
-@@ -23849,6 +23853,10 @@ virDomainDiskSourceFormatNetwork(virBufferPtr attrBuf,
+@@ -23849,6 +23856,10 @@ virDomainDiskSourceFormatNetwork(virBufferPtr attrBuf,
  
      virBufferEscapeString(attrBuf, " name='%s'", path ? path : src->path);
  
@@ -90,7 +118,7 @@ index 222bb8c..685d255 100644
      VIR_FREE(path);
  
      if (src->haveTLS != VIR_TRISTATE_BOOL_ABSENT &&
-@@ -30930,6 +30938,7 @@ virDomainDiskTranslateSourcePool(virDomainDiskDefPtr def)
+@@ -30930,6 +30941,7 @@ virDomainDiskTranslateSourcePool(virDomainDiskDefPtr def)
  
      case VIR_STORAGE_POOL_MPATH:
      case VIR_STORAGE_POOL_RBD:
@@ -216,7 +244,7 @@ index 73e988a..ab7bb81 100644
      case VIR_STORAGE_NET_PROTOCOL_NONE:
          virReportError(VIR_ERR_NO_SUPPORT,
 diff --git a/src/qemu/qemu_block.c b/src/qemu/qemu_block.c
-index cbf0aa4..096700d 100644
+index cbf0aa4..f0ca9e7 100644
 --- a/src/qemu/qemu_block.c
 +++ b/src/qemu/qemu_block.c
 @@ -959,6 +959,42 @@ qemuBlockStorageSourceGetRBDProps(virStorageSourcePtr src)
@@ -245,9 +273,9 @@ index cbf0aa4..096700d 100644
 +
 +    if (virJSONValueObjectCreate(&ret,
 +                                 "s:driver", "vitastor",
-+                                 "S:etcd_host", etcd,
-+                                 "S:etcd_prefix", src->relPath,
-+                                 "S:config_path", src->configFile,
++                                 "S:etcd-host", etcd,
++                                 "S:etcd-prefix", src->relPath,
++                                 "S:config-path", src->configFile,
 +                                 "s:image", src->path,
 +                                 NULL) < 0)
 +        goto cleanup;
@@ -275,7 +303,7 @@ index cbf0aa4..096700d 100644
              if (!(fileprops = qemuBlockStorageSourceGetSheepdogProps(src)))
                  return NULL;
 diff --git a/src/qemu/qemu_command.c b/src/qemu/qemu_command.c
-index 822d5f8..e375cef 100644
+index 822d5f8..abec34e 100644
 --- a/src/qemu/qemu_command.c
 +++ b/src/qemu/qemu_command.c
 @@ -975,6 +975,43 @@ qemuBuildNetworkDriveStr(virStorageSourcePtr src,
@@ -293,7 +321,7 @@ index 822d5f8..e375cef 100644
 +            virBufferStrcat(&buf, "vitastor:image=", src->path, NULL);
 +
 +            if (src->nhosts > 0) {
-+                virBufferAddLit(&buf, ":etcd_host=");
++                virBufferAddLit(&buf, ":etcd-host=");
 +                for (i = 0; i < src->nhosts; i++) {
 +                    if (i)
 +                        virBufferAddLit(&buf, ",");
@@ -311,10 +339,10 @@ index 822d5f8..e375cef 100644
 +            }
 +
 +            if (src->configFile)
-+                virBufferEscape(&buf, '\\', ":", ":config_path=%s", src->configFile);
++                virBufferEscape(&buf, '\\', ":", ":config-path=%s", src->configFile);
 +
 +            if (src->relPath)
-+                virBufferEscape(&buf, '\\', ":", ":etcd_prefix=%s", src->relPath);
++                virBufferEscape(&buf, '\\', ":", ":etcd-prefix=%s", src->relPath);
 +
 +            ret = virBufferContentAndReset(&buf);
 +            break;
@@ -387,7 +415,7 @@ index 4a13e90..33301c7 100644
              ignore_value(VIR_STRDUP(stable_path, data->path));
              break;
 diff --git a/src/util/virstoragefile.c b/src/util/virstoragefile.c
-index bd4b027..b323cd6 100644
+index bd4b027..8454906 100644
 --- a/src/util/virstoragefile.c
 +++ b/src/util/virstoragefile.c
 @@ -84,7 +84,8 @@ VIR_ENUM_IMPL(virStorageNetProtocol, VIR_STORAGE_NET_PROTOCOL_LAST,
@@ -438,16 +466,16 @@ index bd4b027..b323cd6 100644
 +        if (STRPREFIX(p, "image=")) {
 +            if (VIR_STRDUP(src->path, p + strlen("image=")) < 0)
 +                return -1;
-+        } else if (STRPREFIX(p, "etcd_prefix=")) {
-+            if (VIR_STRDUP(src->relPath, p + strlen("etcd_prefix=")) < 0)
++        } else if (STRPREFIX(p, "etcd-prefix=")) {
++            if (VIR_STRDUP(src->relPath, p + strlen("etcd-prefix=")) < 0)
 +                return -1;
-+        } else if (STRPREFIX(p, "config_file=")) {
-+            if (VIR_STRDUP(src->configFile, p + strlen("config_file=")) < 0)
++        } else if (STRPREFIX(p, "config-path=")) {
++            if (VIR_STRDUP(src->configFile, p + strlen("config-path=")) < 0)
 +                return -1;
-+        } else if (STRPREFIX(p, "etcd_host=")) {
++        } else if (STRPREFIX(p, "etcd-host=")) {
 +            char *h, *sep;
 +
-+            h = p + strlen("etcd_host=");
++            h = p + strlen("etcd-host=");
 +            while (h < e) {
 +                for (sep = h; sep < e; ++sep) {
 +                    if (*sep == '\\' && (sep[1] == ',' ||
@@ -507,8 +535,8 @@ index bd4b027..b323cd6 100644
 +{
 +    const char *filename;
 +    const char *image = virJSONValueObjectGetString(json, "image");
-+    const char *conf = virJSONValueObjectGetString(json, "config_path");
-+    const char *etcd_prefix = virJSONValueObjectGetString(json, "etcd_prefix");
++    const char *conf = virJSONValueObjectGetString(json, "config-path");
++    const char *etcd_prefix = virJSONValueObjectGetString(json, "etcd-prefix");
 +    virJSONValuePtr servers = virJSONValueObjectGetArray(json, "server");
 +    size_t nservers;
 +    size_t i;

patches/libvirt-7.0-vitastor.diff

@@ -1,4 +1,4 @@
-commit 41cdfe8317d98f70aadedfdbb381effed2641bdd
+commit 4e74c622884e2585b2cfcdf322fbd2bff6de41ca
 Author: Vitaliy Filippov <vitalif@yourcmc.ru>
 Date:   Fri Jul 9 01:31:57 2021 +0300
 
@@ -65,10 +65,38 @@ index 089e1e0..d7e7ef4 100644
  
  int                     virConnectListAllStoragePools(virConnectPtr conn,
 diff --git a/src/conf/domain_conf.c b/src/conf/domain_conf.c
-index 01b7187..c6e9702 100644
+index 01b7187..645c758 100644
 --- a/src/conf/domain_conf.c
 +++ b/src/conf/domain_conf.c
-@@ -8261,7 +8261,8 @@ virDomainDiskSourceNetworkParse(xmlNodePtr node,
+@@ -5230,8 +5230,7 @@ virDomainDiskDefPostParse(virDomainDiskDefPtr disk,
+                           const virDomainDef *def,
+                           virDomainXMLOptionPtr xmlopt)
+ {
+-    /* internal snapshots and config files are currently supported
+-     * only with rbd: */
++    /* internal snapshots are currently supported only with rbd: */
+     if (virStorageSourceGetActualType(disk->src) != VIR_STORAGE_TYPE_NETWORK &&
+         disk->src->protocol != VIR_STORAGE_NET_PROTOCOL_RBD) {
+         if (disk->src->snapshot) {
+@@ -5240,11 +5239,15 @@ virDomainDiskDefPostParse(virDomainDiskDefPtr disk,
+                              "only with 'rbd' disks"));
+             return -1;
+         }
+-
++    }
++    /* config files are currently supported only with rbd and vitastor: */
++    if (virStorageSourceGetActualType(disk->src) != VIR_STORAGE_TYPE_NETWORK &&
++        disk->src->protocol != VIR_STORAGE_NET_PROTOCOL_RBD &&
++        disk->src->protocol != VIR_STORAGE_NET_PROTOCOL_VITASTOR) {
+         if (disk->src->configFile) {
+             virReportError(VIR_ERR_XML_ERROR, "%s",
+                            _("<config> element is currently supported "
+-                             "only with 'rbd' disks"));
++                             "only with 'rbd' and 'vitastor' disks"));
+             return -1;
+         }
+     }
+@@ -8261,7 +8264,8 @@ virDomainDiskSourceNetworkParse(xmlNodePtr node,
      src->configFile = virXPathString("string(./config/@file)", ctxt);
  
      if (src->protocol == VIR_STORAGE_NET_PROTOCOL_HTTP ||
@@ -78,7 +106,7 @@ index 01b7187..c6e9702 100644
          src->query = virXMLPropString(node, "query");
  
      if (virDomainStorageNetworkParseHosts(node, ctxt, &src->hosts, &src->nhosts) < 0)
-@@ -31392,6 +31393,7 @@ virDomainStorageSourceTranslateSourcePool(virStorageSourcePtr src,
+@@ -31392,6 +31396,7 @@ virDomainStorageSourceTranslateSourcePool(virStorageSourcePtr src,
  
      case VIR_STORAGE_POOL_MPATH:
      case VIR_STORAGE_POOL_RBD:
@@ -216,7 +244,7 @@ index 17b93d0..c5a0084 100644
      case VIR_STORAGE_NET_PROTOCOL_NONE:
          virReportError(VIR_ERR_NO_SUPPORT,
 diff --git a/src/qemu/qemu_block.c b/src/qemu/qemu_block.c
-index f9c6da2..922dde5 100644
+index f9c6da2..d837a05 100644
 --- a/src/qemu/qemu_block.c
 +++ b/src/qemu/qemu_block.c
 @@ -938,6 +938,38 @@ qemuBlockStorageSourceGetRBDProps(virStorageSourcePtr src,
@@ -244,9 +272,9 @@ index f9c6da2..922dde5 100644
 +    }
 +
 +    if (virJSONValueObjectCreate(&ret,
-+                                 "S:etcd_host", etcd,
-+                                 "S:etcd_prefix", src->query,
-+                                 "S:config_path", src->configFile,
++                                 "S:etcd-host", etcd,
++                                 "S:etcd-prefix", src->query,
++                                 "S:config-path", src->configFile,
 +                                 "s:image", src->path,
 +                                 NULL) < 0)
 +        return NULL;
@@ -293,7 +321,7 @@ index f9c6da2..922dde5 100644
              driver = "sheepdog";
              if (!(location = qemuBlockStorageSourceGetSheepdogProps(src)))
 diff --git a/src/qemu/qemu_command.c b/src/qemu/qemu_command.c
-index 6f970a3..10b39ca 100644
+index 6f970a3..4c03fb8 100644
 --- a/src/qemu/qemu_command.c
 +++ b/src/qemu/qemu_command.c
 @@ -1034,6 +1034,43 @@ qemuBuildNetworkDriveStr(virStorageSourcePtr src,
@@ -311,7 +339,7 @@ index 6f970a3..10b39ca 100644
 +            virBufferStrcat(&buf, "vitastor:image=", src->path, NULL);
 +
 +            if (src->nhosts > 0) {
-+                virBufferAddLit(&buf, ":etcd_host=");
++                virBufferAddLit(&buf, ":etcd-host=");
 +                for (i = 0; i < src->nhosts; i++) {
 +                    if (i)
 +                        virBufferAddLit(&buf, ",");
@@ -329,10 +357,10 @@ index 6f970a3..10b39ca 100644
 +            }
 +
 +            if (src->configFile)
-+                virBufferEscape(&buf, '\\', ":", ":config_path=%s", src->configFile);
++                virBufferEscape(&buf, '\\', ":", ":config-path=%s", src->configFile);
 +
 +            if (src->query)
-+                virBufferEscape(&buf, '\\', ":", ":etcd_prefix=%s", src->query);
++                virBufferEscape(&buf, '\\', ":", ":etcd-prefix=%s", src->query);
 +
 +            ret = virBufferContentAndReset(&buf);
 +            break;
@@ -415,7 +443,7 @@ index 29c4c86..a27ad94 100644
      case VIR_STORAGE_POOL_LOGICAL:
      case VIR_STORAGE_POOL_DISK:
 diff --git a/src/util/virstoragefile.c b/src/util/virstoragefile.c
-index 0d3c2af..36e3afc 100644
+index 0d3c2af..edb7f9e 100644
 --- a/src/util/virstoragefile.c
 +++ b/src/util/virstoragefile.c
 @@ -91,6 +91,7 @@ VIR_ENUM_IMPL(virStorageNetProtocol,
@@ -462,14 +490,14 @@ index 0d3c2af..36e3afc 100644
 +
 +        if (STRPREFIX(p, "image=")) {
 +            src->path = g_strdup(p + strlen("image="));
-+        } else if (STRPREFIX(p, "etcd_prefix=")) {
-+            src->query = g_strdup(p + strlen("etcd_prefix="));
-+        } else if (STRPREFIX(p, "config_file=")) {
-+            src->configFile = g_strdup(p + strlen("config_file="));
-+        } else if (STRPREFIX(p, "etcd_host=")) {
++        } else if (STRPREFIX(p, "etcd-prefix=")) {
++            src->query = g_strdup(p + strlen("etcd-prefix="));
++        } else if (STRPREFIX(p, "config-path=")) {
++            src->configFile = g_strdup(p + strlen("config-path="));
++        } else if (STRPREFIX(p, "etcd-host=")) {
 +            char *h, *sep;
 +
-+            h = p + strlen("etcd_host=");
++            h = p + strlen("etcd-host=");
 +            while (h < e) {
 +                for (sep = h; sep < e; ++sep) {
 +                    if (*sep == '\\' && (sep[1] == ',' ||
@@ -526,8 +554,8 @@ index 0d3c2af..36e3afc 100644
 +{
 +    const char *filename;
 +    const char *image = virJSONValueObjectGetString(json, "image");
-+    const char *conf = virJSONValueObjectGetString(json, "config_path");
-+    const char *etcd_prefix = virJSONValueObjectGetString(json, "etcd_prefix");
++    const char *conf = virJSONValueObjectGetString(json, "config-path");
++    const char *etcd_prefix = virJSONValueObjectGetString(json, "etcd-prefix");
 +    virJSONValuePtr servers = virJSONValueObjectGetArray(json, "server");
 +    size_t nservers;
 +    size_t i;

patches/libvirt-7.5-vitastor.diff

@@ -1,4 +1,4 @@
-commit c6e1958a1b4974828e8e5852beb252ce6594e670
+commit c97d7f2bfb7798f0d68bdba2646245dcfb940efa
 Author: Vitaliy Filippov <vitalif@yourcmc.ru>
 Date:   Mon Jun 28 01:20:19 2021 +0300
 
@@ -86,6 +86,37 @@ index d78f846..f7222e3 100644
      case VIR_STORAGE_POOL_SHEEPDOG:
      case VIR_STORAGE_POOL_GLUSTER:
      case VIR_STORAGE_POOL_LAST:
+diff --git a/src/conf/domain_validate.c b/src/conf/domain_validate.c
+index 2124d25..6acc6fa 100644
+--- a/src/conf/domain_validate.c
++++ b/src/conf/domain_validate.c
+@@ -470,7 +470,7 @@ virDomainDiskDefValidateSourceChainOne(const virStorageSource *src)
+         }
+     }
+ 
+-    /* internal snapshots and config files are currently supported only with rbd: */
++    /* internal snapshots are currently supported only with rbd: */
+     if (virStorageSourceGetActualType(src) != VIR_STORAGE_TYPE_NETWORK &&
+         src->protocol != VIR_STORAGE_NET_PROTOCOL_RBD) {
+         if (src->snapshot) {
+@@ -479,11 +479,15 @@ virDomainDiskDefValidateSourceChainOne(const virStorageSource *src)
+                              "only with 'rbd' disks"));
+             return -1;
+         }
+-
++    }
++    /* config files are currently supported only with rbd and vitastor: */
++    if (virStorageSourceGetActualType(src) != VIR_STORAGE_TYPE_NETWORK &&
++        src->protocol != VIR_STORAGE_NET_PROTOCOL_RBD &&
++        src->protocol != VIR_STORAGE_NET_PROTOCOL_VITASTOR) {
+         if (src->configFile) {
+             virReportError(VIR_ERR_XML_ERROR, "%s",
+                            _("<config> element is currently supported "
+-                             "only with 'rbd' disks"));
++                             "only with 'rbd' and 'vitastor' disks"));
+             return -1;
+         }
+     }
 diff --git a/src/conf/storage_conf.c b/src/conf/storage_conf.c
 index 2aa9a3d..166ca1f 100644
 --- a/src/conf/storage_conf.c
@@ -248,7 +279,7 @@ index c0905b0..c172378 100644
      case VIR_STORAGE_NET_PROTOCOL_NONE:
          virReportError(VIR_ERR_NO_SUPPORT,
 diff --git a/src/qemu/qemu_block.c b/src/qemu/qemu_block.c
-index 6627d04..c33f428 100644
+index 6627d04..f769d24 100644
 --- a/src/qemu/qemu_block.c
 +++ b/src/qemu/qemu_block.c
 @@ -928,6 +928,38 @@ qemuBlockStorageSourceGetRBDProps(virStorageSource *src,
@@ -276,9 +307,9 @@ index 6627d04..c33f428 100644
 +    }
 +
 +    if (virJSONValueObjectCreate(&ret,
-+                                 "S:etcd_host", etcd,
-+                                 "S:etcd_prefix", src->query,
-+                                 "S:config_path", src->configFile,
++                                 "S:etcd-host", etcd,
++                                 "S:etcd-prefix", src->query,
++                                 "S:config-path", src->configFile,
 +                                 "s:image", src->path,
 +                                 NULL) < 0)
 +        return NULL;
@@ -325,7 +356,7 @@ index 6627d04..c33f428 100644
              driver = "sheepdog";
              if (!(location = qemuBlockStorageSourceGetSheepdogProps(src)))
 diff --git a/src/qemu/qemu_command.c b/src/qemu/qemu_command.c
-index ea51369..8258632 100644
+index ea51369..d714597 100644
 --- a/src/qemu/qemu_command.c
 +++ b/src/qemu/qemu_command.c
 @@ -1074,6 +1074,43 @@ qemuBuildNetworkDriveStr(virStorageSource *src,
@@ -343,7 +374,7 @@ index ea51369..8258632 100644
 +            virBufferStrcat(&buf, "vitastor:image=", src->path, NULL);
 +
 +            if (src->nhosts > 0) {
-+                virBufferAddLit(&buf, ":etcd_host=");
++                virBufferAddLit(&buf, ":etcd-host=");
 +                for (i = 0; i < src->nhosts; i++) {
 +                    if (i)
 +                        virBufferAddLit(&buf, ",");
@@ -361,10 +392,10 @@ index ea51369..8258632 100644
 +            }
 +
 +            if (src->configFile)
-+                virBufferEscape(&buf, '\\', ":", ":config_path=%s", src->configFile);
++                virBufferEscape(&buf, '\\', ":", ":config-path=%s", src->configFile);
 +
 +            if (src->query)
-+                virBufferEscape(&buf, '\\', ":", ":etcd_prefix=%s", src->query);
++                virBufferEscape(&buf, '\\', ":", ":etcd-prefix=%s", src->query);
 +
 +            ret = virBufferContentAndReset(&buf);
 +            break;
@@ -435,7 +466,7 @@ index c2ff4b8..70d0689 100644
          case VIR_STORAGE_POOL_ZFS:
          case VIR_STORAGE_POOL_LAST:
 diff --git a/src/storage_file/storage_source_backingstore.c b/src/storage_file/storage_source_backingstore.c
-index e48ae72..d7a9b72 100644
+index e48ae72..2017ccc 100644
 --- a/src/storage_file/storage_source_backingstore.c
 +++ b/src/storage_file/storage_source_backingstore.c
 @@ -284,6 +284,75 @@ virStorageSourceParseRBDColonString(const char *rbdstr,
@@ -474,14 +505,14 @@ index e48ae72..d7a9b72 100644
 +
 +        if (STRPREFIX(p, "image=")) {
 +            src->path = g_strdup(p + strlen("image="));
-+        } else if (STRPREFIX(p, "etcd_prefix=")) {
-+            src->query = g_strdup(p + strlen("etcd_prefix="));
-+        } else if (STRPREFIX(p, "config_file=")) {
-+            src->configFile = g_strdup(p + strlen("config_file="));
-+        } else if (STRPREFIX(p, "etcd_host=")) {
++        } else if (STRPREFIX(p, "etcd-prefix=")) {
++            src->query = g_strdup(p + strlen("etcd-prefix="));
++        } else if (STRPREFIX(p, "config-path=")) {
++            src->configFile = g_strdup(p + strlen("config-path="));
++        } else if (STRPREFIX(p, "etcd-host=")) {
 +            char *h, *sep;
 +
-+            h = p + strlen("etcd_host=");
++            h = p + strlen("etcd-host=");
 +            while (h < e) {
 +                for (sep = h; sep < e; ++sep) {
 +                    if (*sep == '\\' && (sep[1] == ',' ||
@@ -538,8 +569,8 @@ index e48ae72..d7a9b72 100644
 +{
 +    const char *filename;
 +    const char *image = virJSONValueObjectGetString(json, "image");
-+    const char *conf = virJSONValueObjectGetString(json, "config_path");
-+    const char *etcd_prefix = virJSONValueObjectGetString(json, "etcd_prefix");
++    const char *conf = virJSONValueObjectGetString(json, "config-path");
++    const char *etcd_prefix = virJSONValueObjectGetString(json, "etcd-prefix");
 +    virJSONValue *servers = virJSONValueObjectGetArray(json, "server");
 +    size_t nservers;
 +    size_t i;

patches/libvirt-7.6-vitastor.diff

@@ -0,0 +1,692 @@
+commit c97d7f2bfb7798f0d68bdba2646245dcfb940efa
+Author: Vitaliy Filippov <vitalif@yourcmc.ru>
+Date:   Mon Jun 28 01:20:19 2021 +0300
+
+    Add Vitastor support
+
+Index: libvirt-7.6.0/docs/schemas/domaincommon.rng
+===================================================================
+--- libvirt-7.6.0.orig/docs/schemas/domaincommon.rng
++++ libvirt-7.6.0/docs/schemas/domaincommon.rng
+@@ -1877,6 +1877,35 @@
+     </element>
+   </define>
+ 
++  <define name="diskSourceNetworkProtocolVitastor">
++    <element name="source">
++      <interleave>
++        <attribute name="protocol">
++          <value>vitastor</value>
++        </attribute>
++        <ref name="diskSourceCommon"/>
++        <optional>
++          <attribute name="name"/>
++        </optional>
++        <optional>
++          <attribute name="query"/>
++        </optional>
++        <zeroOrMore>
++          <ref name="diskSourceNetworkHost"/>
++        </zeroOrMore>
++        <optional>
++          <element name="config">
++            <attribute name="file">
++              <ref name="absFilePath"/>
++            </attribute>
++            <empty/>
++          </element>
++        </optional>
++        <empty/>
++      </interleave>
++    </element>
++  </define>
++
+   <define name="diskSourceNetworkProtocolISCSI">
+     <element name="source">
+       <attribute name="protocol">
+@@ -2133,6 +2162,7 @@
+       <ref name="diskSourceNetworkProtocolSimple"/>
+       <ref name="diskSourceNetworkProtocolVxHS"/>
+       <ref name="diskSourceNetworkProtocolNFS"/>
++      <ref name="diskSourceNetworkProtocolVitastor"/>
+     </choice>
+   </define>
+ 
+Index: libvirt-7.6.0/include/libvirt/libvirt-storage.h
+===================================================================
+--- libvirt-7.6.0.orig/include/libvirt/libvirt-storage.h
++++ libvirt-7.6.0/include/libvirt/libvirt-storage.h
+@@ -245,6 +245,7 @@ typedef enum {
+     VIR_CONNECT_LIST_STORAGE_POOLS_ZFS           = 1 << 17,
+     VIR_CONNECT_LIST_STORAGE_POOLS_VSTORAGE      = 1 << 18,
+     VIR_CONNECT_LIST_STORAGE_POOLS_ISCSI_DIRECT  = 1 << 19,
++    VIR_CONNECT_LIST_STORAGE_POOLS_VITASTOR      = 1 << 20,
+ } virConnectListAllStoragePoolsFlags;
+ 
+ int                     virConnectListAllStoragePools(virConnectPtr conn,
+Index: libvirt-7.6.0/src/conf/domain_conf.c
+===================================================================
+--- libvirt-7.6.0.orig/src/conf/domain_conf.c
++++ libvirt-7.6.0/src/conf/domain_conf.c
+@@ -8268,7 +8268,8 @@ virDomainDiskSourceNetworkParse(xmlNodeP
+     src->configFile = virXPathString("string(./config/@file)", ctxt);
+ 
+     if (src->protocol == VIR_STORAGE_NET_PROTOCOL_HTTP ||
+-        src->protocol == VIR_STORAGE_NET_PROTOCOL_HTTPS)
++        src->protocol == VIR_STORAGE_NET_PROTOCOL_HTTPS ||
++        src->protocol == VIR_STORAGE_NET_PROTOCOL_VITASTOR)
+         src->query = virXMLPropString(node, "query");
+ 
+     if (virDomainStorageNetworkParseHosts(node, ctxt, &src->hosts, &src->nhosts) < 0)
+@@ -30831,6 +30832,7 @@ virDomainStorageSourceTranslateSourcePoo
+ 
+     case VIR_STORAGE_POOL_MPATH:
+     case VIR_STORAGE_POOL_RBD:
++    case VIR_STORAGE_POOL_VITASTOR:
+     case VIR_STORAGE_POOL_SHEEPDOG:
+     case VIR_STORAGE_POOL_GLUSTER:
+     case VIR_STORAGE_POOL_LAST:
+Index: libvirt-7.6.0/src/conf/domain_validate.c
+===================================================================
+--- libvirt-7.6.0.orig/src/conf/domain_validate.c
++++ libvirt-7.6.0/src/conf/domain_validate.c
+@@ -470,7 +470,7 @@ virDomainDiskDefValidateSourceChainOne(c
+         }
+     }
+ 
+-    /* internal snapshots and config files are currently supported only with rbd: */
++    /* internal snapshots are currently supported only with rbd: */
+     if (virStorageSourceGetActualType(src) != VIR_STORAGE_TYPE_NETWORK &&
+         src->protocol != VIR_STORAGE_NET_PROTOCOL_RBD) {
+         if (src->snapshot) {
+@@ -479,11 +479,15 @@ virDomainDiskDefValidateSourceChainOne(c
+                              "only with 'rbd' disks"));
+             return -1;
+         }
+-
++    }
++    /* config files are currently supported only with rbd and vitastor: */
++    if (virStorageSourceGetActualType(src) != VIR_STORAGE_TYPE_NETWORK &&
++        src->protocol != VIR_STORAGE_NET_PROTOCOL_RBD &&
++        src->protocol != VIR_STORAGE_NET_PROTOCOL_VITASTOR) {
+         if (src->configFile) {
+             virReportError(VIR_ERR_XML_ERROR, "%s",
+                            _("<config> element is currently supported "
+-                             "only with 'rbd' disks"));
++                             "only with 'rbd' and 'vitastor' disks"));
+             return -1;
+         }
+     }
+Index: libvirt-7.6.0/src/conf/storage_conf.c
+===================================================================
+--- libvirt-7.6.0.orig/src/conf/storage_conf.c
++++ libvirt-7.6.0/src/conf/storage_conf.c
+@@ -60,7 +60,7 @@ VIR_ENUM_IMPL(virStoragePool,
+               "logical", "disk", "iscsi",
+               "iscsi-direct", "scsi", "mpath",
+               "rbd", "sheepdog", "gluster",
+-              "zfs", "vstorage",
++              "zfs", "vstorage", "vitastor",
+ );
+ 
+ VIR_ENUM_IMPL(virStoragePoolFormatFileSystem,
+@@ -246,6 +246,18 @@ static virStoragePoolTypeInfo poolTypeIn
+           .formatToString = virStorageFileFormatTypeToString,
+       }
+     },
++    {.poolType = VIR_STORAGE_POOL_VITASTOR,
++     .poolOptions = {
++         .flags = (VIR_STORAGE_POOL_SOURCE_HOST |
++                   VIR_STORAGE_POOL_SOURCE_NETWORK |
++                   VIR_STORAGE_POOL_SOURCE_NAME),
++      },
++      .volOptions = {
++          .defaultFormat = VIR_STORAGE_FILE_RAW,
++          .formatFromString = virStorageVolumeFormatFromString,
++          .formatToString = virStorageFileFormatTypeToString,
++      }
++    },
+     {.poolType = VIR_STORAGE_POOL_SHEEPDOG,
+      .poolOptions = {
+          .flags = (VIR_STORAGE_POOL_SOURCE_HOST |
+@@ -546,6 +558,11 @@ virStoragePoolDefParseSource(xmlXPathCon
+                        _("element 'name' is mandatory for RBD pool"));
+         return -1;
+     }
++    if (pool_type == VIR_STORAGE_POOL_VITASTOR && source->name == NULL) {
++        virReportError(VIR_ERR_XML_ERROR, "%s",
++                       _("element 'name' is mandatory for Vitastor pool"));
++        return -1;
++    }
+ 
+     if (options->formatFromString) {
+         g_autofree char *format = NULL;
+@@ -1182,6 +1199,7 @@ virStoragePoolDefFormatBuf(virBuffer *bu
+     /* RBD, Sheepdog, Gluster and Iscsi-direct devices are not local block devs nor
+      * files, so they don't have a target */
+     if (def->type != VIR_STORAGE_POOL_RBD &&
++        def->type != VIR_STORAGE_POOL_VITASTOR &&
+         def->type != VIR_STORAGE_POOL_SHEEPDOG &&
+         def->type != VIR_STORAGE_POOL_GLUSTER &&
+         def->type != VIR_STORAGE_POOL_ISCSI_DIRECT) {
+Index: libvirt-7.6.0/src/conf/storage_conf.h
+===================================================================
+--- libvirt-7.6.0.orig/src/conf/storage_conf.h
++++ libvirt-7.6.0/src/conf/storage_conf.h
+@@ -106,6 +106,7 @@ typedef enum {
+     VIR_STORAGE_POOL_GLUSTER,  /* Gluster device */
+     VIR_STORAGE_POOL_ZFS,      /* ZFS */
+     VIR_STORAGE_POOL_VSTORAGE, /* Virtuozzo Storage */
++    VIR_STORAGE_POOL_VITASTOR, /* Vitastor */
+ 
+     VIR_STORAGE_POOL_LAST,
+ } virStoragePoolType;
+@@ -465,6 +466,7 @@ VIR_ENUM_DECL(virStoragePartedFs);
+                  VIR_CONNECT_LIST_STORAGE_POOLS_SCSI     | \
+                  VIR_CONNECT_LIST_STORAGE_POOLS_MPATH    | \
+                  VIR_CONNECT_LIST_STORAGE_POOLS_RBD      | \
++                 VIR_CONNECT_LIST_STORAGE_POOLS_VITASTOR | \
+                  VIR_CONNECT_LIST_STORAGE_POOLS_SHEEPDOG | \
+                  VIR_CONNECT_LIST_STORAGE_POOLS_GLUSTER  | \
+                  VIR_CONNECT_LIST_STORAGE_POOLS_ZFS      | \
+Index: libvirt-7.6.0/src/conf/storage_source_conf.c
+===================================================================
+--- libvirt-7.6.0.orig/src/conf/storage_source_conf.c
++++ libvirt-7.6.0/src/conf/storage_source_conf.c
+@@ -85,6 +85,7 @@ VIR_ENUM_IMPL(virStorageNetProtocol,
+               "ssh",
+               "vxhs",
+               "nfs",
++              "vitastor",
+ );
+ 
+ 
+@@ -1262,6 +1263,7 @@ virStorageSourceNetworkDefaultPort(virSt
+         case VIR_STORAGE_NET_PROTOCOL_GLUSTER:
+             return 24007;
+ 
++        case VIR_STORAGE_NET_PROTOCOL_VITASTOR:
+         case VIR_STORAGE_NET_PROTOCOL_RBD:
+             /* we don't provide a default for RBD */
+             return 0;
+Index: libvirt-7.6.0/src/conf/storage_source_conf.h
+===================================================================
+--- libvirt-7.6.0.orig/src/conf/storage_source_conf.h
++++ libvirt-7.6.0/src/conf/storage_source_conf.h
+@@ -127,6 +127,7 @@ typedef enum {
+     VIR_STORAGE_NET_PROTOCOL_SSH,
+     VIR_STORAGE_NET_PROTOCOL_VXHS,
+     VIR_STORAGE_NET_PROTOCOL_NFS,
++    VIR_STORAGE_NET_PROTOCOL_VITASTOR,
+ 
+     VIR_STORAGE_NET_PROTOCOL_LAST
+ } virStorageNetProtocol;
+Index: libvirt-7.6.0/src/conf/virstorageobj.c
+===================================================================
+--- libvirt-7.6.0.orig/src/conf/virstorageobj.c
++++ libvirt-7.6.0/src/conf/virstorageobj.c
+@@ -1481,6 +1481,7 @@ virStoragePoolObjSourceFindDuplicateCb(c
+             return 1;
+         break;
+ 
++    case VIR_STORAGE_POOL_VITASTOR:
+     case VIR_STORAGE_POOL_RBD:
+     case VIR_STORAGE_POOL_LAST:
+         break;
+@@ -1980,6 +1981,8 @@ virStoragePoolObjMatch(virStoragePoolObj
+                (obj->def->type == VIR_STORAGE_POOL_MPATH))   ||
+               (MATCH(VIR_CONNECT_LIST_STORAGE_POOLS_RBD) &&
+                (obj->def->type == VIR_STORAGE_POOL_RBD))     ||
++              (MATCH(VIR_CONNECT_LIST_STORAGE_POOLS_VITASTOR) &&
++               (obj->def->type == VIR_STORAGE_POOL_VITASTOR)) ||
+               (MATCH(VIR_CONNECT_LIST_STORAGE_POOLS_SHEEPDOG) &&
+                (obj->def->type == VIR_STORAGE_POOL_SHEEPDOG)) ||
+               (MATCH(VIR_CONNECT_LIST_STORAGE_POOLS_GLUSTER) &&
+Index: libvirt-7.6.0/src/libvirt-storage.c
+===================================================================
+--- libvirt-7.6.0.orig/src/libvirt-storage.c
++++ libvirt-7.6.0/src/libvirt-storage.c
+@@ -92,6 +92,7 @@ virStoragePoolGetConnect(virStoragePoolP
+  * VIR_CONNECT_LIST_STORAGE_POOLS_SCSI
+  * VIR_CONNECT_LIST_STORAGE_POOLS_MPATH
+  * VIR_CONNECT_LIST_STORAGE_POOLS_RBD
++ * VIR_CONNECT_LIST_STORAGE_POOLS_VITASTOR
+  * VIR_CONNECT_LIST_STORAGE_POOLS_SHEEPDOG
+  * VIR_CONNECT_LIST_STORAGE_POOLS_GLUSTER
+  * VIR_CONNECT_LIST_STORAGE_POOLS_ZFS
+Index: libvirt-7.6.0/src/libxl/libxl_conf.c
+===================================================================
+--- libvirt-7.6.0.orig/src/libxl/libxl_conf.c
++++ libvirt-7.6.0/src/libxl/libxl_conf.c
+@@ -972,6 +972,7 @@ libxlMakeNetworkDiskSrcStr(virStorageSou
+     case VIR_STORAGE_NET_PROTOCOL_SSH:
+     case VIR_STORAGE_NET_PROTOCOL_VXHS:
+     case VIR_STORAGE_NET_PROTOCOL_NFS:
++    case VIR_STORAGE_NET_PROTOCOL_VITASTOR:
+     case VIR_STORAGE_NET_PROTOCOL_LAST:
+     case VIR_STORAGE_NET_PROTOCOL_NONE:
+         virReportError(VIR_ERR_NO_SUPPORT,
+Index: libvirt-7.6.0/src/libxl/xen_xl.c
+===================================================================
+--- libvirt-7.6.0.orig/src/libxl/xen_xl.c
++++ libvirt-7.6.0/src/libxl/xen_xl.c
+@@ -1540,6 +1540,7 @@ xenFormatXLDiskSrcNet(virStorageSource *
+     case VIR_STORAGE_NET_PROTOCOL_SSH:
+     case VIR_STORAGE_NET_PROTOCOL_VXHS:
+     case VIR_STORAGE_NET_PROTOCOL_NFS:
++    case VIR_STORAGE_NET_PROTOCOL_VITASTOR:
+     case VIR_STORAGE_NET_PROTOCOL_LAST:
+     case VIR_STORAGE_NET_PROTOCOL_NONE:
+         virReportError(VIR_ERR_NO_SUPPORT,
+Index: libvirt-7.6.0/src/qemu/qemu_block.c
+===================================================================
+--- libvirt-7.6.0.orig/src/qemu/qemu_block.c
++++ libvirt-7.6.0/src/qemu/qemu_block.c
+@@ -916,6 +916,38 @@ qemuBlockStorageSourceGetRBDProps(virSto
+ 
+ 
+ static virJSONValue *
++qemuBlockStorageSourceGetVitastorProps(virStorageSource *src)
++{
++    virJSONValue *ret = NULL;
++    virStorageNetHostDef *host;
++    size_t i;
++    g_auto(virBuffer) buf = VIR_BUFFER_INITIALIZER;
++    g_autofree char *etcd = NULL;
++
++    for (i = 0; i < src->nhosts; i++) {
++        host = src->hosts + i;
++        if ((virStorageNetHostTransport)host->transport != VIR_STORAGE_NET_HOST_TRANS_TCP) {
++            return NULL;
++        }
++        virBufferAsprintf(&buf, i > 0 ? ",%s:%u" : "%s:%u", host->name, host->port);
++    }
++    if (src->nhosts > 0) {
++        etcd = virBufferContentAndReset(&buf);
++    }
++
++    if (virJSONValueObjectCreate(&ret,
++                                 "S:etcd-host", etcd,
++                                 "S:etcd-prefix", src->query,
++                                 "S:config-path", src->configFile,
++                                 "s:image", src->path,
++                                 NULL) < 0)
++        return NULL;
++
++    return ret;
++}
++
++
++static virJSONValue *
+ qemuBlockStorageSourceGetSheepdogProps(virStorageSource *src)
+ {
+     g_autoptr(virJSONValue) serverprops = NULL;
+@@ -1205,6 +1237,12 @@ qemuBlockStorageSourceGetBackendProps(vi
+                 return NULL;
+             break;
+ 
++        case VIR_STORAGE_NET_PROTOCOL_VITASTOR:
++            driver = "vitastor";
++            if (!(fileprops = qemuBlockStorageSourceGetVitastorProps(src)))
++                return NULL;
++            break;
++
+         case VIR_STORAGE_NET_PROTOCOL_SHEEPDOG:
+             driver = "sheepdog";
+             if (!(fileprops = qemuBlockStorageSourceGetSheepdogProps(src)))
+@@ -2219,6 +2257,7 @@ qemuBlockGetBackingStoreString(virStorag
+ 
+             case VIR_STORAGE_NET_PROTOCOL_SHEEPDOG:
+             case VIR_STORAGE_NET_PROTOCOL_RBD:
++            case VIR_STORAGE_NET_PROTOCOL_VITASTOR:
+             case VIR_STORAGE_NET_PROTOCOL_VXHS:
+             case VIR_STORAGE_NET_PROTOCOL_NFS:
+             case VIR_STORAGE_NET_PROTOCOL_SSH:
+@@ -2596,6 +2635,12 @@ qemuBlockStorageSourceCreateGetStoragePr
+                 return -1;
+             break;
+ 
++        case VIR_STORAGE_NET_PROTOCOL_VITASTOR:
++            driver = "vitastor";
++            if (!(location = qemuBlockStorageSourceGetVitastorProps(src)))
++                return -1;
++            break;
++
+         case VIR_STORAGE_NET_PROTOCOL_SHEEPDOG:
+             driver = "sheepdog";
+             if (!(location = qemuBlockStorageSourceGetSheepdogProps(src)))
+Index: libvirt-7.6.0/src/qemu/qemu_command.c
+===================================================================
+--- libvirt-7.6.0.orig/src/qemu/qemu_command.c
++++ libvirt-7.6.0/src/qemu/qemu_command.c
+@@ -1074,6 +1074,43 @@ qemuBuildNetworkDriveStr(virStorageSourc
+             ret = virBufferContentAndReset(&buf);
+             break;
+ 
++        case VIR_STORAGE_NET_PROTOCOL_VITASTOR:
++            if (strchr(src->path, ':')) {
++                virReportError(VIR_ERR_CONFIG_UNSUPPORTED,
++                               _("':' not allowed in Vitastor source volume name '%s'"),
++                               src->path);
++                return NULL;
++            }
++
++            virBufferStrcat(&buf, "vitastor:image=", src->path, NULL);
++
++            if (src->nhosts > 0) {
++                virBufferAddLit(&buf, ":etcd-host=");
++                for (i = 0; i < src->nhosts; i++) {
++                    if (i)
++                        virBufferAddLit(&buf, ",");
++
++                    /* assume host containing : is ipv6 */
++                    if (strchr(src->hosts[i].name, ':'))
++                        virBufferEscape(&buf, '\\', ":", "[%s]",
++                                        src->hosts[i].name);
++                    else
++                        virBufferAsprintf(&buf, "%s", src->hosts[i].name);
++
++                    if (src->hosts[i].port)
++                        virBufferAsprintf(&buf, "\\:%u", src->hosts[i].port);
++                }
++            }
++
++            if (src->configFile)
++                virBufferEscape(&buf, '\\', ":", ":config-path=%s", src->configFile);
++
++            if (src->query)
++                virBufferEscape(&buf, '\\', ":", ":etcd-prefix=%s", src->query);
++
++            ret = virBufferContentAndReset(&buf);
++            break;
++
+         case VIR_STORAGE_NET_PROTOCOL_VXHS:
+             virReportError(VIR_ERR_INTERNAL_ERROR, "%s",
+                            _("VxHS protocol does not support URI syntax"));
+Index: libvirt-7.6.0/src/qemu/qemu_domain.c
+===================================================================
+--- libvirt-7.6.0.orig/src/qemu/qemu_domain.c
++++ libvirt-7.6.0/src/qemu/qemu_domain.c
+@@ -4900,7 +4900,8 @@ qemuDomainValidateStorageSource(virStora
+     if (src->query &&
+         (actualType != VIR_STORAGE_TYPE_NETWORK ||
+          (src->protocol != VIR_STORAGE_NET_PROTOCOL_HTTPS &&
+-          src->protocol != VIR_STORAGE_NET_PROTOCOL_HTTP))) {
++          src->protocol != VIR_STORAGE_NET_PROTOCOL_HTTP &&
++          src->protocol != VIR_STORAGE_NET_PROTOCOL_VITASTOR))) {
+         virReportError(VIR_ERR_CONFIG_UNSUPPORTED, "%s",
+                        _("query is supported only with HTTP(S) protocols"));
+         return -1;
+@@ -10102,6 +10103,7 @@ qemuDomainPrepareStorageSourceTLS(virSto
+         break;
+ 
+     case VIR_STORAGE_NET_PROTOCOL_RBD:
++    case VIR_STORAGE_NET_PROTOCOL_VITASTOR:
+     case VIR_STORAGE_NET_PROTOCOL_SHEEPDOG:
+     case VIR_STORAGE_NET_PROTOCOL_GLUSTER:
+     case VIR_STORAGE_NET_PROTOCOL_ISCSI:
+Index: libvirt-7.6.0/src/qemu/qemu_snapshot.c
+===================================================================
+--- libvirt-7.6.0.orig/src/qemu/qemu_snapshot.c
++++ libvirt-7.6.0/src/qemu/qemu_snapshot.c
+@@ -402,6 +402,7 @@ qemuSnapshotPrepareDiskExternalInactive(
+         case VIR_STORAGE_NET_PROTOCOL_NONE:
+         case VIR_STORAGE_NET_PROTOCOL_NBD:
+         case VIR_STORAGE_NET_PROTOCOL_RBD:
++        case VIR_STORAGE_NET_PROTOCOL_VITASTOR:
+         case VIR_STORAGE_NET_PROTOCOL_SHEEPDOG:
+         case VIR_STORAGE_NET_PROTOCOL_GLUSTER:
+         case VIR_STORAGE_NET_PROTOCOL_ISCSI:
+@@ -494,6 +495,7 @@ qemuSnapshotPrepareDiskExternalActive(vi
+         case VIR_STORAGE_NET_PROTOCOL_NONE:
+         case VIR_STORAGE_NET_PROTOCOL_NBD:
+         case VIR_STORAGE_NET_PROTOCOL_RBD:
++        case VIR_STORAGE_NET_PROTOCOL_VITASTOR:
+         case VIR_STORAGE_NET_PROTOCOL_SHEEPDOG:
+         case VIR_STORAGE_NET_PROTOCOL_ISCSI:
+         case VIR_STORAGE_NET_PROTOCOL_HTTP:
+@@ -647,6 +649,7 @@ qemuSnapshotPrepareDiskInternal(virDomai
+         case VIR_STORAGE_NET_PROTOCOL_NONE:
+         case VIR_STORAGE_NET_PROTOCOL_NBD:
+         case VIR_STORAGE_NET_PROTOCOL_RBD:
++        case VIR_STORAGE_NET_PROTOCOL_VITASTOR:
+         case VIR_STORAGE_NET_PROTOCOL_SHEEPDOG:
+         case VIR_STORAGE_NET_PROTOCOL_GLUSTER:
+         case VIR_STORAGE_NET_PROTOCOL_ISCSI:
+Index: libvirt-7.6.0/src/storage/storage_driver.c
+===================================================================
+--- libvirt-7.6.0.orig/src/storage/storage_driver.c
++++ libvirt-7.6.0/src/storage/storage_driver.c
+@@ -1644,6 +1644,7 @@ storageVolLookupByPathCallback(virStorag
+ 
+         case VIR_STORAGE_POOL_GLUSTER:
+         case VIR_STORAGE_POOL_RBD:
++        case VIR_STORAGE_POOL_VITASTOR:
+         case VIR_STORAGE_POOL_SHEEPDOG:
+         case VIR_STORAGE_POOL_ZFS:
+         case VIR_STORAGE_POOL_LAST:
+Index: libvirt-7.6.0/src/storage_file/storage_source_backingstore.c
+===================================================================
+--- libvirt-7.6.0.orig/src/storage_file/storage_source_backingstore.c
++++ libvirt-7.6.0/src/storage_file/storage_source_backingstore.c
+@@ -285,6 +285,75 @@ virStorageSourceParseRBDColonString(cons
+ 
+ 
+ static int
++virStorageSourceParseVitastorColonString(const char *colonstr,
++                                         virStorageSource *src)
++{
++    char *p, *e, *next;
++    g_autofree char *options = NULL;
++
++    /* optionally skip the "vitastor:" prefix if provided */
++    if (STRPREFIX(colonstr, "vitastor:"))
++        colonstr += strlen("vitastor:");
++
++    options = g_strdup(colonstr);
++
++    p = options;
++    while (*p) {
++        /* find : delimiter or end of string */
++        for (e = p; *e && *e != ':'; ++e) {
++            if (*e == '\\') {
++                e++;
++                if (*e == '\0')
++                    break;
++            }
++        }
++        if (*e == '\0') {
++            next = e;    /* last kv pair */
++        } else {
++            next = e + 1;
++            *e = '\0';
++        }
++
++        if (STRPREFIX(p, "image=")) {
++            src->path = g_strdup(p + strlen("image="));
++        } else if (STRPREFIX(p, "etcd-prefix=")) {
++            src->query = g_strdup(p + strlen("etcd-prefix="));
++        } else if (STRPREFIX(p, "config-path=")) {
++            src->configFile = g_strdup(p + strlen("config-path="));
++        } else if (STRPREFIX(p, "etcd-host=")) {
++            char *h, *sep;
++
++            h = p + strlen("etcd-host=");
++            while (h < e) {
++                for (sep = h; sep < e; ++sep) {
++                    if (*sep == '\\' && (sep[1] == ',' ||
++                                         sep[1] == ';' ||
++                                         sep[1] == ' ')) {
++                        *sep = '\0';
++                        sep += 2;
++                        break;
++                    }
++                }
++
++                if (virStorageSourceRBDAddHost(src, h) < 0)
++                    return -1;
++
++                h = sep;
++            }
++        }
++
++        p = next;
++    }
++
++    if (!src->path) {
++        return -1;
++    }
++
++    return 0;
++}
++
++
++static int
+ virStorageSourceParseNBDColonString(const char *nbdstr,
+                                     virStorageSource *src)
+ {
+@@ -396,6 +465,11 @@ virStorageSourceParseBackingColon(virSto
+             return -1;
+         break;
+ 
++    case VIR_STORAGE_NET_PROTOCOL_VITASTOR:
++        if (virStorageSourceParseVitastorColonString(path, src) < 0)
++            return -1;
++        break;
++
+     case VIR_STORAGE_NET_PROTOCOL_SHEEPDOG:
+     case VIR_STORAGE_NET_PROTOCOL_LAST:
+     case VIR_STORAGE_NET_PROTOCOL_NONE:
+@@ -985,6 +1059,54 @@ virStorageSourceParseBackingJSONRBD(virS
+ }
+ 
+ static int
++virStorageSourceParseBackingJSONVitastor(virStorageSource *src,
++                                         virJSONValue *json,
++                                         const char *jsonstr G_GNUC_UNUSED,
++                                         int opaque G_GNUC_UNUSED)
++{
++    const char *filename;
++    const char *image = virJSONValueObjectGetString(json, "image");
++    const char *conf = virJSONValueObjectGetString(json, "config-path");
++    const char *etcd_prefix = virJSONValueObjectGetString(json, "etcd-prefix");
++    virJSONValue *servers = virJSONValueObjectGetArray(json, "server");
++    size_t nservers;
++    size_t i;
++
++    src->type = VIR_STORAGE_TYPE_NETWORK;
++    src->protocol = VIR_STORAGE_NET_PROTOCOL_VITASTOR;
++
++    /* legacy syntax passed via 'filename' option */
++    if ((filename = virJSONValueObjectGetString(json, "filename")))
++        return virStorageSourceParseVitastorColonString(filename, src);
++
++    if (!image) {
++        virReportError(VIR_ERR_INVALID_ARG, "%s",
++                       _("missing image name in Vitastor backing volume "
++                         "JSON specification"));
++        return -1;
++    }
++
++    src->path = g_strdup(image);
++    src->configFile = g_strdup(conf);
++    src->query = g_strdup(etcd_prefix);
++
++    if (servers) {
++        nservers = virJSONValueArraySize(servers);
++
++        src->hosts = g_new0(virStorageNetHostDef, nservers);
++        src->nhosts = nservers;
++
++        for (i = 0; i < nservers; i++) {
++            if (virStorageSourceParseBackingJSONInetSocketAddress(src->hosts + i,
++                                                                  virJSONValueArrayGet(servers, i)) < 0)
++                return -1;
++        }
++    }
++
++    return 0;
++}
++
++static int
+ virStorageSourceParseBackingJSONRaw(virStorageSource *src,
+                                     virJSONValue *json,
+                                     const char *jsonstr,
+@@ -1162,6 +1284,7 @@ static const struct virStorageSourceJSON
+     {"sheepdog", false, virStorageSourceParseBackingJSONSheepdog, 0},
+     {"ssh", false, virStorageSourceParseBackingJSONSSH, 0},
+     {"rbd", false, virStorageSourceParseBackingJSONRBD, 0},
++    {"vitastor", false, virStorageSourceParseBackingJSONVitastor, 0},
+     {"raw", true, virStorageSourceParseBackingJSONRaw, 0},
+     {"nfs", false, virStorageSourceParseBackingJSONNFS, 0},
+     {"vxhs", false, virStorageSourceParseBackingJSONVxHS, 0},
+Index: libvirt-7.6.0/src/test/test_driver.c
+===================================================================
+--- libvirt-7.6.0.orig/src/test/test_driver.c
++++ libvirt-7.6.0/src/test/test_driver.c
+@@ -7193,6 +7193,7 @@ testStorageVolumeTypeForPool(int pooltyp
+     case VIR_STORAGE_POOL_ISCSI_DIRECT:
+     case VIR_STORAGE_POOL_GLUSTER:
+     case VIR_STORAGE_POOL_RBD:
++    case VIR_STORAGE_POOL_VITASTOR:
+         return VIR_STORAGE_VOL_NETWORK;
+     case VIR_STORAGE_POOL_LOGICAL:
+     case VIR_STORAGE_POOL_DISK:
+Index: libvirt-7.6.0/tests/storagepoolcapsschemadata/poolcaps-fs.xml
+===================================================================
+--- libvirt-7.6.0.orig/tests/storagepoolcapsschemadata/poolcaps-fs.xml
++++ libvirt-7.6.0/tests/storagepoolcapsschemadata/poolcaps-fs.xml
+@@ -204,4 +204,11 @@
+       </enum>
+     </volOptions>
+   </pool>
++  <pool type='vitastor' supported='no'>
++    <volOptions>
++      <defaultFormat type='raw'/>
++      <enum name='targetFormatType'>
++      </enum>
++    </volOptions>
++  </pool>
+ </storagepoolCapabilities>
+Index: libvirt-7.6.0/tests/storagepoolcapsschemadata/poolcaps-full.xml
+===================================================================
+--- libvirt-7.6.0.orig/tests/storagepoolcapsschemadata/poolcaps-full.xml
++++ libvirt-7.6.0/tests/storagepoolcapsschemadata/poolcaps-full.xml
+@@ -204,4 +204,11 @@
+       </enum>
+     </volOptions>
+   </pool>
++  <pool type='vitastor' supported='yes'>
++    <volOptions>
++      <defaultFormat type='raw'/>
++      <enum name='targetFormatType'>
++      </enum>
++    </volOptions>
++  </pool>
+ </storagepoolCapabilities>
+Index: libvirt-7.6.0/tests/storagepoolxml2argvtest.c
+===================================================================
+--- libvirt-7.6.0.orig/tests/storagepoolxml2argvtest.c
++++ libvirt-7.6.0/tests/storagepoolxml2argvtest.c
+@@ -68,6 +68,7 @@ testCompareXMLToArgvFiles(bool shouldFai
+     case VIR_STORAGE_POOL_GLUSTER:
+     case VIR_STORAGE_POOL_ZFS:
+     case VIR_STORAGE_POOL_VSTORAGE:
++    case VIR_STORAGE_POOL_VITASTOR:
+     case VIR_STORAGE_POOL_LAST:
+     default:
+         VIR_TEST_DEBUG("pool type '%s' has no xml2argv test", defTypeStr);
+Index: libvirt-7.6.0/tools/virsh-pool.c
+===================================================================
+--- libvirt-7.6.0.orig/tools/virsh-pool.c
++++ libvirt-7.6.0/tools/virsh-pool.c
+@@ -1231,6 +1231,9 @@ cmdPoolList(vshControl *ctl, const vshCm
+             case VIR_STORAGE_POOL_VSTORAGE:
+                 flags |= VIR_CONNECT_LIST_STORAGE_POOLS_VSTORAGE;
+                 break;
++            case VIR_STORAGE_POOL_VITASTOR:
++                flags |= VIR_CONNECT_LIST_STORAGE_POOLS_VITASTOR;
++                break;
+             case VIR_STORAGE_POOL_LAST:
+                 break;
+             }

patches/libvirt-example.xml

@@ -15,9 +15,10 @@
       <target dev='vda' bus='virtio' />
       <driver name='qemu' type='raw' />
       <!-- name is Vitastor image name -->
-      <!-- config (optional) is the path to Vitastor's configuration file -->
       <!-- query (optional) is Vitastor's etcd_prefix -->
-      <source protocol='vitastor' name='debian9' query='/vitastor' config='/etc/vitastor/vitastor.conf'>
+      <source protocol='vitastor' name='debian9' query='/vitastor'>
+        <!-- config (optional) is the path to Vitastor's configuration file -->
+        <config file='/etc/vitastor/vitastor.conf' />
         <!-- hosts = etcd addresses -->
         <host name='192.168.7.2' port='2379' />
       </source>

patches/nova-21.diff

@@ -0,0 +1,288 @@
+diff --git a/nova/virt/image/model.py b/nova/virt/image/model.py
+index 971f7e9c07..ec3fca72cb 100644
+--- a/nova/virt/image/model.py
++++ b/nova/virt/image/model.py
+@@ -129,3 +129,22 @@ class RBDImage(Image):
+         self.user = user
+         self.password = password
+         self.servers = servers
++
++
++class VitastorImage(Image):
++    """Class for images in a remote Vitastor cluster"""
++
++    def __init__(self, name, etcd_address = None, etcd_prefix = None, config_path = None):
++        """Create a new Vitastor image object
++
++        :param name: name of the image
++        :param etcd_address: etcd URL(s) (optional)
++        :param etcd_prefix: etcd prefix (optional)
++        :param config_path: path to the configuration (optional)
++        """
++        super(VitastorImage, self).__init__(FORMAT_RAW)
++
++        self.name = name
++        self.etcd_address = etcd_address
++        self.etcd_prefix = etcd_prefix
++        self.config_path = config_path
+diff --git a/nova/virt/images.py b/nova/virt/images.py
+index 5358f3766a..ebe3d6effb 100644
+--- a/nova/virt/images.py
++++ b/nova/virt/images.py
+@@ -41,7 +41,7 @@ IMAGE_API = glance.API()
+ 
+ def qemu_img_info(path, format=None):
+     """Return an object containing the parsed output from qemu-img info."""
+-    if not os.path.exists(path) and not path.startswith('rbd:'):
++    if not os.path.exists(path) and not path.startswith('rbd:') and not path.startswith('vitastor:'):
+         raise exception.DiskNotFound(location=path)
+ 
+     info = nova.privsep.qemu.unprivileged_qemu_img_info(path, format=format)
+@@ -50,7 +50,7 @@ def qemu_img_info(path, format=None):
+ 
+ def privileged_qemu_img_info(path, format=None, output_format='json'):
+     """Return an object containing the parsed output from qemu-img info."""
+-    if not os.path.exists(path) and not path.startswith('rbd:'):
++    if not os.path.exists(path) and not path.startswith('rbd:') and not path.startswith('vitastor:'):
+         raise exception.DiskNotFound(location=path)
+ 
+     info = nova.privsep.qemu.privileged_qemu_img_info(path, format=format)
+diff --git a/nova/virt/libvirt/config.py b/nova/virt/libvirt/config.py
+index ea525648b3..d7aa798954 100644
+--- a/nova/virt/libvirt/config.py
++++ b/nova/virt/libvirt/config.py
+@@ -1005,6 +1005,8 @@ class LibvirtConfigGuestDisk(LibvirtConfigGuestDevice):
+         self.driver_iommu = False
+         self.source_path = None
+         self.source_protocol = None
++        self.source_query = None
++        self.source_config = None
+         self.source_name = None
+         self.source_hosts = []
+         self.source_ports = []
+@@ -1133,6 +1135,10 @@ class LibvirtConfigGuestDisk(LibvirtConfigGuestDevice):
+             source = etree.Element("source", protocol=self.source_protocol)
+             if self.source_name is not None:
+                 source.set('name', self.source_name)
++            if self.source_query is not None:
++                source.set('query', self.source_query)
++            if self.source_config is not None:
++                source.append(etree.Element('config', file=self.source_config))
+             hosts_info = zip(self.source_hosts, self.source_ports)
+             for name, port in hosts_info:
+                 host = etree.Element('host', name=name)
+diff --git a/nova/virt/libvirt/driver.py b/nova/virt/libvirt/driver.py
+index fbd033690a..74dc59ce87 100644
+--- a/nova/virt/libvirt/driver.py
++++ b/nova/virt/libvirt/driver.py
+@@ -180,6 +180,7 @@ libvirt_volume_drivers = [
+     'local=nova.virt.libvirt.volume.volume.LibvirtVolumeDriver',
+     'fake=nova.virt.libvirt.volume.volume.LibvirtFakeVolumeDriver',
+     'rbd=nova.virt.libvirt.volume.net.LibvirtNetVolumeDriver',
++    'vitastor=nova.virt.libvirt.volume.vitastor.LibvirtVitastorVolumeDriver',
+     'nfs=nova.virt.libvirt.volume.nfs.LibvirtNFSVolumeDriver',
+     'smbfs=nova.virt.libvirt.volume.smbfs.LibvirtSMBFSVolumeDriver',
+     'fibre_channel='
+@@ -287,10 +288,10 @@ class LibvirtDriver(driver.ComputeDriver):
+         # This prevents the risk of one test setting a capability
+         # which bleeds over into other tests.
+ 
+-        # LVM and RBD require raw images. If we are not configured to
++        # LVM, RBD, Vitastor require raw images. If we are not configured to
+         # force convert images into raw format, then we _require_ raw
+         # images only.
+-        raw_only = ('rbd', 'lvm')
++        raw_only = ('rbd', 'lvm', 'vitastor')
+         requires_raw_image = (CONF.libvirt.images_type in raw_only and
+                               not CONF.force_raw_images)
+         requires_ploop_image = CONF.libvirt.virt_type == 'parallels'
+@@ -703,12 +704,12 @@ class LibvirtDriver(driver.ComputeDriver):
+         # Some imagebackends are only able to import raw disk images,
+         # and will fail if given any other format. See the bug
+         # https://bugs.launchpad.net/nova/+bug/1816686 for more details.
+-        if CONF.libvirt.images_type in ('rbd',):
++        if CONF.libvirt.images_type in ('rbd', 'vitastor'):
+             if not CONF.force_raw_images:
+                 msg = _("'[DEFAULT]/force_raw_images = False' is not "
+-                        "allowed with '[libvirt]/images_type = rbd'. "
++                        "allowed with '[libvirt]/images_type = rbd' or 'vitastor'. "
+                         "Please check the two configs and if you really "
+-                        "do want to use rbd as images_type, set "
++                        "do want to use rbd or vitastor as images_type, set "
+                         "force_raw_images to True.")
+                 raise exception.InvalidConfiguration(msg)
+ 
+@@ -2165,6 +2166,16 @@ class LibvirtDriver(driver.ComputeDriver):
+                     if connection_info['data'].get('auth_enabled'):
+                         username = connection_info['data']['auth_username']
+                         path = f"rbd:{volume_name}:id={username}"
++                elif connection_info['driver_volume_type'] == 'vitastor':
++                    volume_name = connection_info['data']['name']
++                    path = 'vitastor:image='+volume_name.replace(':', '\\:')
++                    for k in [ 'config_path', 'etcd_address', 'etcd_prefix' ]:
++                        if k in connection_info['data']:
++                            kk = k
++                            if kk == 'etcd_address':
++                                # FIXME use etcd_address in qemu driver
++                                kk = 'etcd_host'
++                            path += ":"+kk.replace('_', '-')+"="+connection_info['data'][k].replace(':', '\\:')
+                 else:
+                     path = 'unknown'
+                     raise exception.DiskNotFound(location='unknown')
+@@ -2440,8 +2451,8 @@ class LibvirtDriver(driver.ComputeDriver):
+ 
+         image_format = CONF.libvirt.snapshot_image_format or source_type
+ 
+-        # NOTE(bfilippov): save lvm and rbd as raw
+-        if image_format == 'lvm' or image_format == 'rbd':
++        # NOTE(bfilippov): save lvm and rbd and vitastor as raw
++        if image_format == 'lvm' or image_format == 'rbd' or image_format == 'vitastor':
+             image_format = 'raw'
+ 
+         metadata = self._create_snapshot_metadata(instance.image_meta,
+@@ -2512,7 +2523,7 @@ class LibvirtDriver(driver.ComputeDriver):
+                               expected_state=task_states.IMAGE_UPLOADING)
+ 
+             # TODO(nic): possibly abstract this out to the root_disk
+-            if source_type == 'rbd' and live_snapshot:
++            if (source_type == 'rbd' or source_type == 'vitastor') and live_snapshot:
+                 # Standard snapshot uses qemu-img convert from RBD which is
+                 # not safe to run with live_snapshot.
+                 live_snapshot = False
+@@ -3715,7 +3726,7 @@ class LibvirtDriver(driver.ComputeDriver):
+         # cleanup rescue volume
+         lvm.remove_volumes([lvmdisk for lvmdisk in self._lvm_disks(instance)
+                                 if lvmdisk.endswith('.rescue')])
+-        if CONF.libvirt.images_type == 'rbd':
++        if CONF.libvirt.images_type == 'rbd' or CONF.libvirt.images_type == 'vitastor':
+             filter_fn = lambda disk: (disk.startswith(instance.uuid) and
+                                       disk.endswith('.rescue'))
+             rbd_utils.RBDDriver().cleanup_volumes(filter_fn)
+@@ -3972,6 +3983,8 @@ class LibvirtDriver(driver.ComputeDriver):
+         # TODO(mikal): there is a bug here if images_type has
+         # changed since creation of the instance, but I am pretty
+         # sure that this bug already exists.
++        if CONF.libvirt.images_type == 'vitastor':
++            return 'vitastor'
+         return 'rbd' if CONF.libvirt.images_type == 'rbd' else 'raw'
+ 
+     @staticmethod
+@@ -4370,10 +4383,10 @@ class LibvirtDriver(driver.ComputeDriver):
+                 finally:
+                     # NOTE(mikal): if the config drive was imported into RBD,
+                     # then we no longer need the local copy
+-                    if CONF.libvirt.images_type == 'rbd':
++                    if CONF.libvirt.images_type == 'rbd' or CONF.libvirt.images_type == 'vitastor':
+                         LOG.info('Deleting local config drive %(path)s '
+-                                 'because it was imported into RBD.',
+-                                 {'path': config_disk_local_path},
++                                 'because it was imported into %(type).',
++                                 {'path': config_disk_local_path, 'type': CONF.libvirt.images_type},
+                                  instance=instance)
+                         os.unlink(config_disk_local_path)
+ 
+diff --git a/nova/virt/libvirt/utils.py b/nova/virt/libvirt/utils.py
+index c1dc34daf4..263965912f 100644
+--- a/nova/virt/libvirt/utils.py
++++ b/nova/virt/libvirt/utils.py
+@@ -399,6 +399,10 @@ def find_disk(guest: libvirt_guest.Guest) -> ty.Tuple[str, ty.Optional[str]]:
+             disk_path = disk.source_name
+             if disk_path:
+                 disk_path = 'rbd:' + disk_path
++        elif not disk_path and disk.source_protocol == 'vitastor':
++            disk_path = disk.source_name
++            if disk_path:
++                disk_path = 'vitastor:' + disk_path
+ 
+     if not disk_path:
+         raise RuntimeError(_("Can't retrieve root device path "
+@@ -417,6 +421,8 @@ def get_disk_type_from_path(path: str) -> ty.Optional[str]:
+         return 'lvm'
+     elif path.startswith('rbd:'):
+         return 'rbd'
++    elif path.startswith('vitastor:'):
++        return 'vitastor'
+     elif (os.path.isdir(path) and
+           os.path.exists(os.path.join(path, "DiskDescriptor.xml"))):
+         return 'ploop'
+diff --git a/nova/virt/libvirt/volume/vitastor.py b/nova/virt/libvirt/volume/vitastor.py
+new file mode 100644
+index 0000000000..0256df62c1
+--- /dev/null
++++ b/nova/virt/libvirt/volume/vitastor.py
+@@ -0,0 +1,75 @@
++# Copyright (c) 2021+, Vitaliy Filippov <vitalif@yourcmc.ru>
++#
++#    Licensed under the Apache License, Version 2.0 (the "License"); you may
++#    not use this file except in compliance with the License. You may obtain
++#    a copy of the License at
++#
++#         http://www.apache.org/licenses/LICENSE-2.0
++#
++#    Unless required by applicable law or agreed to in writing, software
++#    distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
++#    WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
++#    License for the specific language governing permissions and limitations
++#    under the License.
++
++from os_brick import exception as os_brick_exception
++from os_brick import initiator
++from os_brick.initiator import connector
++from oslo_log import log as logging
++
++import nova.conf
++from nova import utils
++from nova.virt.libvirt.volume import volume as libvirt_volume
++
++
++CONF = nova.conf.CONF
++LOG = logging.getLogger(__name__)
++
++
++class LibvirtVitastorVolumeDriver(libvirt_volume.LibvirtBaseVolumeDriver):
++    """Driver to attach Vitastor volumes to libvirt."""
++    def __init__(self, host):
++        super(LibvirtVitastorVolumeDriver, self).__init__(host, is_block_dev=False)
++
++    def connect_volume(self, connection_info, instance):
++        pass
++
++    def disconnect_volume(self, connection_info, instance):
++        pass
++
++    def get_config(self, connection_info, disk_info):
++        """Returns xml for libvirt."""
++        conf = super(LibvirtVitastorVolumeDriver, self).get_config(connection_info, disk_info)
++        conf.source_type = 'network'
++        conf.source_protocol = 'vitastor'
++        conf.source_name = connection_info['data'].get('name')
++        conf.source_query = connection_info['data'].get('etcd_prefix') or None
++        conf.source_config = connection_info['data'].get('config_path') or None
++        conf.source_hosts = []
++        conf.source_ports = []
++        addresses = connection_info['data'].get('etcd_address', '')
++        if addresses:
++            if not isinstance(addresses, list):
++                addresses = addresses.split(',')
++            for addr in addresses:
++                if addr.startswith('https://'):
++                    raise NotImplementedError('Vitastor block driver does not support SSL for etcd communication yet')
++                if addr.startswith('http://'):
++                    addr = addr[7:]
++                addr = addr.rstrip('/')
++                if addr.endswith('/v3'):
++                    addr = addr[0:-3]
++                p = addr.find('/')
++                if p > 0:
++                    raise NotImplementedError('libvirt does not support custom URL paths for Vitastor etcd yet. Use /etc/vitastor/vitastor.conf')
++                p = addr.find(':')
++                port = '2379'
++                if p > 0:
++                    port = addr[p+1:]
++                    addr = addr[0:p]
++                conf.source_hosts.append(addr)
++                conf.source_ports.append(port)
++        return conf
++
++    def extend_volume(self, connection_info, instance, requested_size):
++        raise NotImplementedError

patches/nova-23.diff

@@ -1,5 +1,5 @@
 diff --git a/nova/virt/image/model.py b/nova/virt/image/model.py
-index 971f7e9c07..70ed70d5e2 100644
+index 971f7e9c07..ec3fca72cb 100644
 --- a/nova/virt/image/model.py
 +++ b/nova/virt/image/model.py
 @@ -129,3 +129,22 @@ class RBDImage(Image):
@@ -19,7 +19,7 @@ index 971f7e9c07..70ed70d5e2 100644
 +        :param etcd_prefix: etcd prefix (optional)
 +        :param config_path: path to the configuration (optional)
 +        """
-+        super(RBDImage, self).__init__(FORMAT_RAW)
++        super(VitastorImage, self).__init__(FORMAT_RAW)
 +
 +        self.name = name
 +        self.etcd_address = etcd_address
@@ -48,7 +48,7 @@ index 5358f3766a..ebe3d6effb 100644
  
      info = nova.privsep.qemu.privileged_qemu_img_info(path, format=format)
 diff --git a/nova/virt/libvirt/config.py b/nova/virt/libvirt/config.py
-index f9475776b3..51573fe41d 100644
+index f9475776b3..a2e18aab67 100644
 --- a/nova/virt/libvirt/config.py
 +++ b/nova/virt/libvirt/config.py
 @@ -1060,6 +1060,8 @@ class LibvirtConfigGuestDisk(LibvirtConfigGuestDevice):
@@ -60,18 +60,19 @@ index f9475776b3..51573fe41d 100644
          self.source_name = None
          self.source_hosts = []
          self.source_ports = []
-@@ -1186,7 +1188,8 @@ class LibvirtConfigGuestDisk(LibvirtConfigGuestDevice):
-         elif self.source_type == "mount":
-             dev.append(etree.Element("source", dir=self.source_path))
-         elif self.source_type == "network" and self.source_protocol:
--            source = etree.Element("source", protocol=self.source_protocol)
-+            source = etree.Element("source", protocol=self.source_protocol,
-+                query=self.source_query, config=self.source_config)
+@@ -1189,6 +1191,10 @@ class LibvirtConfigGuestDisk(LibvirtConfigGuestDevice):
+             source = etree.Element("source", protocol=self.source_protocol)
              if self.source_name is not None:
                  source.set('name', self.source_name)
++            if self.source_query is not None:
++                source.set('query', self.source_query)
++            if self.source_config is not None:
++                source.append(etree.Element('config', file=self.source_config))
              hosts_info = zip(self.source_hosts, self.source_ports)
+             for name, port in hosts_info:
+                 host = etree.Element('host', name=name)
 diff --git a/nova/virt/libvirt/driver.py b/nova/virt/libvirt/driver.py
-index 391231c527..34dc60dcdd 100644
+index 391231c527..f38faa1608 100644
 --- a/nova/virt/libvirt/driver.py
 +++ b/nova/virt/libvirt/driver.py
 @@ -179,6 +179,7 @@ VOLUME_DRIVERS = {
@@ -124,7 +125,7 @@ index 391231c527..34dc60dcdd 100644
 +                            if kk == 'etcd_address':
 +                                # FIXME use etcd_address in qemu driver
 +                                kk = 'etcd_host'
-+                            path += ":"+kk+"="+connection_info['data'][k].replace(':', '\\:')
++                            path += ":"+kk.replace('_', '-')+"="+connection_info['data'][k].replace(':', '\\:')
                  else:
                      path = 'unknown'
                      raise exception.DiskNotFound(location='unknown')

patches/pve-qemu-5.1-vitastor.patch

@@ -0,0 +1,175 @@
+Index: pve-qemu-kvm-5.1.0/qapi/block-core.json
+===================================================================
+--- pve-qemu-kvm-5.1.0.orig/qapi/block-core.json
++++ pve-qemu-kvm-5.1.0/qapi/block-core.json
+@@ -3041,7 +3041,7 @@
+             'luks', 'nbd', 'nfs', 'null-aio', 'null-co', 'nvme', 'parallels',
+             'qcow', 'qcow2', 'qed', 'quorum', 'raw', 'rbd',
+             { 'name': 'replication', 'if': 'defined(CONFIG_REPLICATION)' },
+-            'sheepdog', 'pbs',
++            'sheepdog', 'pbs', 'vitastor',
+             'ssh', 'throttle', 'vdi', 'vhdx', 'vmdk', 'vpc', 'vvfat' ] }
+ 
+ ##
+@@ -3889,6 +3889,28 @@
+             '*tag': 'str' } }
+ 
+ ##
++# @BlockdevOptionsVitastor:
++#
++# Driver specific block device options for vitastor
++#
++# @image:       Image name
++# @inode:       Inode number
++# @pool:        Pool ID
++# @size:        Desired image size in bytes
++# @config-path: Path to Vitastor configuration
++# @etcd-host:   etcd connection address(es)
++# @etcd-prefix: etcd key/value prefix
++##
++{ 'struct': 'BlockdevOptionsVitastor',
++  'data': { '*inode': 'uint64',
++            '*pool': 'uint64',
++            '*size': 'uint64',
++            '*image': 'str',
++            '*config-path': 'str',
++            '*etcd-host': 'str',
++            '*etcd-prefix': 'str' } }
++
++##
+ # @ReplicationMode:
+ #
+ # An enumeration of replication modes.
+@@ -4234,6 +4256,7 @@
+       'replication': { 'type': 'BlockdevOptionsReplication',
+                        'if': 'defined(CONFIG_REPLICATION)' },
+       'sheepdog':   'BlockdevOptionsSheepdog',
++      'vitastor':   'BlockdevOptionsVitastor',
+       'ssh':        'BlockdevOptionsSsh',
+       'throttle':   'BlockdevOptionsThrottle',
+       'vdi':        'BlockdevOptionsGenericFormat',
+@@ -4623,6 +4646,17 @@
+             '*cluster-size' :   'size' } }
+ 
+ ##
++# @BlockdevCreateOptionsVitastor:
++#
++# Driver specific image creation options for Vitastor.
++#
++# @size: Size of the virtual disk in bytes
++##
++{ 'struct': 'BlockdevCreateOptionsVitastor',
++  'data': { 'location':         'BlockdevOptionsVitastor',
++            'size':             'size' } }
++
++##
+ # @BlockdevVmdkSubformat:
+ #
+ # Subformat options for VMDK images
+@@ -4884,6 +4918,7 @@
+       'qed':            'BlockdevCreateOptionsQed',
+       'rbd':            'BlockdevCreateOptionsRbd',
+       'sheepdog':       'BlockdevCreateOptionsSheepdog',
++      'vitastor':       'BlockdevCreateOptionsVitastor',
+       'ssh':            'BlockdevCreateOptionsSsh',
+       'vdi':            'BlockdevCreateOptionsVdi',
+       'vhdx':           'BlockdevCreateOptionsVhdx',
+Index: pve-qemu-kvm-5.1.0/configure
+===================================================================
+--- pve-qemu-kvm-5.1.0.orig/configure
++++ pve-qemu-kvm-5.1.0/configure
+@@ -446,6 +446,7 @@ trace_backends="log"
+ trace_file="trace"
+ spice=""
+ rbd=""
++vitastor=""
+ smartcard=""
+ libusb=""
+ usb_redir=""
+@@ -1383,6 +1384,10 @@ for opt do
+   ;;
+   --enable-rbd) rbd="yes"
+   ;;
++  --disable-vitastor) vitastor="no"
++  ;;
++  --enable-vitastor) vitastor="yes"
++  ;;
+   --disable-xfsctl) xfs="no"
+   ;;
+   --enable-xfsctl) xfs="yes"
+@@ -1901,6 +1906,7 @@ disabled with --disable-FEATURE, default
+   vhost-vdpa      vhost-vdpa kernel backend support
+   spice           spice
+   rbd             rados block device (rbd)
++  vitastor        vitastor block device
+   libiscsi        iscsi support
+   libnfs          nfs support
+   smartcard       smartcard support (libcacard)
+@@ -4234,6 +4240,27 @@ EOF
+ fi
+ 
+ ##########################################
++# vitastor probe
++if test "$vitastor" != "no" ; then
++  cat > $TMPC <<EOF
++#include <vitastor_c.h>
++int main(void) {
++  vitastor_c_create_qemu(0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0);
++  return 0;
++}
++EOF
++  vitastor_libs="-lvitastor_client"
++  if compile_prog "" "$vitastor_libs" ; then
++    vitastor=yes
++  else
++    if test "$vitastor" = "yes" ; then
++      feature_not_found "vitastor block device" "Install vitastor-client-dev"
++    fi
++    vitastor=no
++  fi
++fi
++
++##########################################
+ # libssh probe
+ if test "$libssh" != "no" ; then
+   if $pkg_config --exists libssh; then
+@@ -6969,6 +6996,7 @@ echo "Trace output file $trace_file-<pid
+ fi
+ echo "spice support     $spice $(echo_version $spice $spice_protocol_version/$spice_server_version)"
+ echo "rbd support       $rbd"
++echo "vitastor support  $vitastor"
+ echo "xfsctl support    $xfs"
+ echo "smartcard support $smartcard"
+ echo "libusb            $libusb"
+@@ -7644,6 +7672,10 @@ if test "$rbd" = "yes" ; then
+   echo "RBD_CFLAGS=$rbd_cflags" >> $config_host_mak
+   echo "RBD_LIBS=$rbd_libs" >> $config_host_mak
+ fi
++if test "$vitastor" = "yes" ; then
++  echo "CONFIG_VITASTOR=y" >> $config_host_mak
++  echo "VITASTOR_LIBS=$vitastor_libs" >> $config_host_mak
++fi
+ 
+ echo "CONFIG_COROUTINE_BACKEND=$coroutine" >> $config_host_mak
+ if test "$coroutine_pool" = "yes" ; then
+Index: pve-qemu-kvm-5.1.0/block/Makefile.objs
+===================================================================
+--- pve-qemu-kvm-5.1.0.orig/block/Makefile.objs
++++ pve-qemu-kvm-5.1.0/block/Makefile.objs
+@@ -32,6 +32,7 @@ block-obj-$(if $(CONFIG_LIBISCSI),y,n) +
+ block-obj-$(CONFIG_LIBNFS) += nfs.o
+ block-obj-$(CONFIG_CURL) += curl.o
+ block-obj-$(CONFIG_RBD) += rbd.o
++block-obj-$(CONFIG_VITASTOR) += vitastor.o
+ block-obj-$(CONFIG_GLUSTERFS) += gluster.o
+ block-obj-$(CONFIG_LIBSSH) += ssh.o
+ block-obj-y += backup-dump.o
+@@ -61,6 +62,8 @@ curl.o-cflags      := $(CURL_CFLAGS)
+ curl.o-libs        := $(CURL_LIBS)
+ rbd.o-cflags       := $(RBD_CFLAGS)
+ rbd.o-libs         := $(RBD_LIBS)
++vitastor.o-cflags  := $(VITASTOR_CFLAGS)
++vitastor.o-libs    := $(VITASTOR_LIBS)
+ gluster.o-cflags   := $(GLUSTERFS_CFLAGS)
+ gluster.o-libs     := $(GLUSTERFS_LIBS)
+ ssh.o-cflags       := $(LIBSSH_CFLAGS)

patches/pve-qemu-5.2-vitastor.patch

@@ -0,0 +1,181 @@
+Index: pve-qemu-kvm-5.2.0/qapi/block-core.json
+===================================================================
+--- pve-qemu-kvm-5.2.0.orig/qapi/block-core.json
++++ pve-qemu-kvm-5.2.0/qapi/block-core.json
+@@ -3076,7 +3076,7 @@
+             'luks', 'nbd', 'nfs', 'null-aio', 'null-co', 'nvme', 'parallels',
+             'qcow', 'qcow2', 'qed', 'quorum', 'raw', 'rbd',
+             { 'name': 'replication', 'if': 'defined(CONFIG_REPLICATION)' },
+-            'sheepdog', 'pbs',
++            'sheepdog', 'pbs', 'vitastor',
+             'ssh', 'throttle', 'vdi', 'vhdx', 'vmdk', 'vpc', 'vvfat' ] }
+ 
+ ##
+@@ -3924,6 +3924,28 @@
+             '*tag': 'str' } }
+ 
+ ##
++# @BlockdevOptionsVitastor:
++#
++# Driver specific block device options for vitastor
++#
++# @image:       Image name
++# @inode:       Inode number
++# @pool:        Pool ID
++# @size:        Desired image size in bytes
++# @config-path: Path to Vitastor configuration
++# @etcd-host:   etcd connection address(es)
++# @etcd-prefix: etcd key/value prefix
++##
++{ 'struct': 'BlockdevOptionsVitastor',
++  'data': { '*inode': 'uint64',
++            '*pool': 'uint64',
++            '*size': 'uint64',
++            '*image': 'str',
++            '*config-path': 'str',
++            '*etcd-host': 'str',
++            '*etcd-prefix': 'str' } }
++
++##
+ # @ReplicationMode:
+ #
+ # An enumeration of replication modes.
+@@ -4272,6 +4294,7 @@
+       'replication': { 'type': 'BlockdevOptionsReplication',
+                        'if': 'defined(CONFIG_REPLICATION)' },
+       'sheepdog':   'BlockdevOptionsSheepdog',
++      'vitastor':   'BlockdevOptionsVitastor',
+       'ssh':        'BlockdevOptionsSsh',
+       'throttle':   'BlockdevOptionsThrottle',
+       'vdi':        'BlockdevOptionsGenericFormat',
+@@ -4662,6 +4685,17 @@
+             '*cluster-size' :   'size' } }
+ 
+ ##
++# @BlockdevCreateOptionsVitastor:
++#
++# Driver specific image creation options for Vitastor.
++#
++# @size: Size of the virtual disk in bytes
++##
++{ 'struct': 'BlockdevCreateOptionsVitastor',
++  'data': { 'location':         'BlockdevOptionsVitastor',
++            'size':             'size' } }
++
++##
+ # @BlockdevVmdkSubformat:
+ #
+ # Subformat options for VMDK images
+@@ -4923,6 +4957,7 @@
+       'qed':            'BlockdevCreateOptionsQed',
+       'rbd':            'BlockdevCreateOptionsRbd',
+       'sheepdog':       'BlockdevCreateOptionsSheepdog',
++      'vitastor':       'BlockdevCreateOptionsVitastor',
+       'ssh':            'BlockdevCreateOptionsSsh',
+       'vdi':            'BlockdevCreateOptionsVdi',
+       'vhdx':           'BlockdevCreateOptionsVhdx',
+Index: pve-qemu-kvm-5.2.0/block/meson.build
+===================================================================
+--- pve-qemu-kvm-5.2.0.orig/block/meson.build
++++ pve-qemu-kvm-5.2.0/block/meson.build
+@@ -89,6 +89,7 @@ foreach m : [
+   ['CONFIG_LIBNFS', 'nfs', libnfs, 'nfs.c'],
+   ['CONFIG_LIBSSH', 'ssh', libssh, 'ssh.c'],
+   ['CONFIG_RBD', 'rbd', rbd, 'rbd.c'],
++  ['CONFIG_VITASTOR', 'vitastor', vitastor, 'vitastor.c'],
+ ]
+   if config_host.has_key(m[0])
+     if enable_modules
+Index: pve-qemu-kvm-5.2.0/configure
+===================================================================
+--- pve-qemu-kvm-5.2.0.orig/configure
++++ pve-qemu-kvm-5.2.0/configure
+@@ -372,6 +372,7 @@ trace_backends="log"
+ trace_file="trace"
+ spice=""
+ rbd=""
++vitastor=""
+ smartcard=""
+ u2f="auto"
+ libusb=""
+@@ -1264,6 +1265,10 @@ for opt do
+   ;;
+   --enable-rbd) rbd="yes"
+   ;;
++  --disable-vitastor) vitastor="no"
++  ;;
++  --enable-vitastor) vitastor="yes"
++  ;;
+   --disable-xfsctl) xfs="no"
+   ;;
+   --enable-xfsctl) xfs="yes"
+@@ -1807,6 +1812,7 @@ disabled with --disable-FEATURE, default
+   vhost-vdpa      vhost-vdpa kernel backend support
+   spice           spice
+   rbd             rados block device (rbd)
++  vitastor        vitastor block device
+   libiscsi        iscsi support
+   libnfs          nfs support
+   smartcard       smartcard support (libcacard)
+@@ -3700,6 +3706,27 @@ EOF
+ fi
+ 
+ ##########################################
++# vitastor probe
++if test "$vitastor" != "no" ; then
++  cat > $TMPC <<EOF
++#include <vitastor_c.h>
++int main(void) {
++  vitastor_c_create_qemu(0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0);
++  return 0;
++}
++EOF
++  vitastor_libs="-lvitastor_client"
++  if compile_prog "" "$vitastor_libs" ; then
++    vitastor=yes
++  else
++    if test "$vitastor" = "yes" ; then
++      feature_not_found "vitastor block device" "Install vitastor-client-dev"
++    fi
++    vitastor=no
++  fi
++fi
++
++##########################################
+ # libssh probe
+ if test "$libssh" != "no" ; then
+   if $pkg_config --exists libssh; then
+@@ -6437,6 +6464,10 @@ if test "$rbd" = "yes" ; then
+   echo "CONFIG_RBD=y" >> $config_host_mak
+   echo "RBD_LIBS=$rbd_libs" >> $config_host_mak
+ fi
++if test "$vitastor" = "yes" ; then
++  echo "CONFIG_VITASTOR=y" >> $config_host_mak
++  echo "VITASTOR_LIBS=$vitastor_libs" >> $config_host_mak
++fi
+ 
+ echo "CONFIG_COROUTINE_BACKEND=$coroutine" >> $config_host_mak
+ if test "$coroutine_pool" = "yes" ; then
+Index: pve-qemu-kvm-5.2.0/meson.build
+===================================================================
+--- pve-qemu-kvm-5.2.0.orig/meson.build
++++ pve-qemu-kvm-5.2.0/meson.build
+@@ -596,6 +596,10 @@ rbd = not_found
+ if 'CONFIG_RBD' in config_host
+   rbd = declare_dependency(link_args: config_host['RBD_LIBS'].split())
+ endif
++vitastor = not_found
++if 'CONFIG_VITASTOR' in config_host
++  vitastor = declare_dependency(link_args: config_host['VITASTOR_LIBS'].split())
++endif
+ glusterfs = not_found
+ if 'CONFIG_GLUSTERFS' in config_host
+   glusterfs = declare_dependency(compile_args: config_host['GLUSTERFS_CFLAGS'].split(),
+@@ -2151,6 +2155,7 @@ endif
+ # TODO: add back protocol and server version
+ summary_info += {'spice support':     config_host.has_key('CONFIG_SPICE')}
+ summary_info += {'rbd support':       config_host.has_key('CONFIG_RBD')}
++summary_info += {'vitastor support':  config_host.has_key('CONFIG_VITASTOR')}
+ summary_info += {'xfsctl support':    config_host.has_key('CONFIG_XFS')}
+ summary_info += {'smartcard support': config_host.has_key('CONFIG_SMARTCARD')}
+ summary_info += {'U2F support':       u2f.found()}

patches/pve-qemu-6.1-vitastor.patch

@@ -0,0 +1,188 @@
+Index: pve-qemu-kvm-6.1.0/qapi/block-core.json
+===================================================================
+--- pve-qemu-kvm-6.1.0.orig/qapi/block-core.json
++++ pve-qemu-kvm-6.1.0/qapi/block-core.json
+@@ -3084,7 +3084,7 @@
+             'preallocate', 'qcow', 'qcow2', 'qed', 'quorum', 'raw', 'rbd',
+             { 'name': 'replication', 'if': 'defined(CONFIG_REPLICATION)' },
+             'pbs',
+-            'ssh', 'throttle', 'vdi', 'vhdx', 'vmdk', 'vpc', 'vvfat' ] }
++            'ssh', 'throttle', 'vdi', 'vhdx', 'vitastor', 'vmdk', 'vpc', 'vvfat' ] }
+ 
+ ##
+ # @BlockdevOptionsFile:
+@@ -4020,6 +4020,28 @@
+             '*server': ['InetSocketAddressBase'] } }
+ 
+ ##
++# @BlockdevOptionsVitastor:
++#
++# Driver specific block device options for vitastor
++#
++# @image:       Image name
++# @inode:       Inode number
++# @pool:        Pool ID
++# @size:        Desired image size in bytes
++# @config-path: Path to Vitastor configuration
++# @etcd-host:   etcd connection address(es)
++# @etcd-prefix: etcd key/value prefix
++##
++{ 'struct': 'BlockdevOptionsVitastor',
++  'data': { '*inode': 'uint64',
++            '*pool': 'uint64',
++            '*size': 'uint64',
++            '*image': 'str',
++            '*config-path': 'str',
++            '*etcd-host': 'str',
++            '*etcd-prefix': 'str' } }
++
++##
+ # @ReplicationMode:
+ #
+ # An enumeration of replication modes.
+@@ -4392,6 +4414,7 @@
+       'throttle':   'BlockdevOptionsThrottle',
+       'vdi':        'BlockdevOptionsGenericFormat',
+       'vhdx':       'BlockdevOptionsGenericFormat',
++      'vitastor':   'BlockdevOptionsVitastor',
+       'vmdk':       'BlockdevOptionsGenericCOWFormat',
+       'vpc':        'BlockdevOptionsGenericFormat',
+       'vvfat':      'BlockdevOptionsVVFAT'
+@@ -4782,6 +4805,17 @@
+             '*encrypt' :        'RbdEncryptionCreateOptions' } }
+ 
+ ##
++# @BlockdevCreateOptionsVitastor:
++#
++# Driver specific image creation options for Vitastor.
++#
++# @size: Size of the virtual disk in bytes
++##
++{ 'struct': 'BlockdevCreateOptionsVitastor',
++  'data': { 'location':         'BlockdevOptionsVitastor',
++            'size':             'size' } }
++
++##
+ # @BlockdevVmdkSubformat:
+ #
+ # Subformat options for VMDK images
+@@ -4977,6 +5011,7 @@
+       'ssh':            'BlockdevCreateOptionsSsh',
+       'vdi':            'BlockdevCreateOptionsVdi',
+       'vhdx':           'BlockdevCreateOptionsVhdx',
++      'vitastor':       'BlockdevCreateOptionsVitastor',
+       'vmdk':           'BlockdevCreateOptionsVmdk',
+       'vpc':            'BlockdevCreateOptionsVpc'
+   } }
+Index: pve-qemu-kvm-6.1.0/block/meson.build
+===================================================================
+--- pve-qemu-kvm-6.1.0.orig/block/meson.build
++++ pve-qemu-kvm-6.1.0/block/meson.build
+@@ -91,6 +91,7 @@ foreach m : [
+   [libnfs, 'nfs', files('nfs.c')],
+   [libssh, 'ssh', files('ssh.c')],
+   [rbd, 'rbd', files('rbd.c')],
++  [vitastor, 'vitastor', files('vitastor.c')],
+ ]
+   if m[0].found()
+     module_ss = ss.source_set()
+Index: pve-qemu-kvm-6.1.0/configure
+===================================================================
+--- pve-qemu-kvm-6.1.0.orig/configure
++++ pve-qemu-kvm-6.1.0/configure
+@@ -375,6 +375,7 @@ trace_file="trace"
+ spice="$default_feature"
+ spice_protocol="auto"
+ rbd="auto"
++vitastor="auto"
+ smartcard="auto"
+ u2f="auto"
+ libusb="auto"
+@@ -1293,6 +1294,10 @@ for opt do
+   ;;
+   --enable-rbd) rbd="enabled"
+   ;;
++  --disable-vitastor) vitastor="disabled"
++  ;;
++  --enable-vitastor) vitastor="enabled"
++  ;;
+   --disable-xfsctl) xfs="no"
+   ;;
+   --enable-xfsctl) xfs="yes"
+@@ -1921,6 +1926,7 @@ disabled with --disable-FEATURE, default
+   spice           spice
+   spice-protocol  spice-protocol
+   rbd             rados block device (rbd)
++  vitastor        vitastor block device
+   libiscsi        iscsi support
+   libnfs          nfs support
+   smartcard       smartcard support (libcacard)
+@@ -5211,7 +5217,7 @@ if test "$skip_meson" = no; then
+         -Dcapstone=$capstone -Dslirp=$slirp -Dfdt=$fdt -Dbrlapi=$brlapi \
+         -Dcurl=$curl -Dglusterfs=$glusterfs -Dbzip2=$bzip2 -Dlibiscsi=$libiscsi \
+         -Dlibnfs=$libnfs -Diconv=$iconv -Dcurses=$curses -Dlibudev=$libudev\
+-        -Drbd=$rbd -Dlzo=$lzo -Dsnappy=$snappy -Dlzfse=$lzfse -Dlibxml2=$libxml2 \
++        -Drbd=$rbd -Dvitastor=$vitastor -Dlzo=$lzo -Dsnappy=$snappy -Dlzfse=$lzfse -Dlibxml2=$libxml2 \
+         -Dlibdaxctl=$libdaxctl -Dlibpmem=$libpmem -Dlinux_io_uring=$linux_io_uring \
+         -Dgnutls=$gnutls -Dnettle=$nettle -Dgcrypt=$gcrypt -Dauth_pam=$auth_pam \
+         -Dzstd=$zstd -Dseccomp=$seccomp -Dvirtfs=$virtfs -Dcap_ng=$cap_ng \
+Index: pve-qemu-kvm-6.1.0/meson.build
+===================================================================
+--- pve-qemu-kvm-6.1.0.orig/meson.build
++++ pve-qemu-kvm-6.1.0/meson.build
+@@ -729,6 +729,26 @@ if not get_option('rbd').auto() or have_
+   endif
+ endif
+ 
++vitastor = not_found
++if not get_option('vitastor').auto() or have_block
++  libvitastor_client = cc.find_library('vitastor_client', has_headers: ['vitastor_c.h'],
++    required: get_option('vitastor'), kwargs: static_kwargs)
++  if libvitastor_client.found()
++    if cc.links('''
++      #include <vitastor_c.h>
++      int main(void) {
++        vitastor_c_create_qemu(0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0);
++        return 0;
++      }''', dependencies: libvitastor_client)
++      vitastor = declare_dependency(dependencies: libvitastor_client)
++    elif get_option('vitastor').enabled()
++      error('could not link libvitastor_client')
++    else
++      warning('could not link libvitastor_client, disabling')
++    endif
++  endif
++endif
++
+ glusterfs = not_found
+ glusterfs_ftruncate_has_stat = false
+ glusterfs_iocb_has_stat = false
+@@ -1268,6 +1288,7 @@ config_host_data.set('CONFIG_LIBNFS', li
+ config_host_data.set('CONFIG_LINUX_IO_URING', linux_io_uring.found())
+ config_host_data.set('CONFIG_LIBPMEM', libpmem.found())
+ config_host_data.set('CONFIG_RBD', rbd.found())
++config_host_data.set('CONFIG_VITASTOR', vitastor.found())
+ config_host_data.set('CONFIG_SDL', sdl.found())
+ config_host_data.set('CONFIG_SDL_IMAGE', sdl_image.found())
+ config_host_data.set('CONFIG_SECCOMP', seccomp.found())
+@@ -3087,6 +3108,7 @@ summary_info += {'bpf support': libbpf.f
+ # TODO: add back protocol and server version
+ summary_info += {'spice support':     config_host.has_key('CONFIG_SPICE')}
+ summary_info += {'rbd support':       rbd.found()}
++summary_info += {'vitastor support':  vitastor.found()}
+ summary_info += {'xfsctl support':    config_host.has_key('CONFIG_XFS')}
+ summary_info += {'smartcard support': cacard.found()}
+ summary_info += {'U2F support':       u2f.found()}
+Index: pve-qemu-kvm-6.1.0/meson_options.txt
+===================================================================
+--- pve-qemu-kvm-6.1.0.orig/meson_options.txt
++++ pve-qemu-kvm-6.1.0/meson_options.txt
+@@ -102,6 +102,8 @@ option('lzo', type : 'feature', value :
+        description: 'lzo compression support')
+ option('rbd', type : 'feature', value : 'auto',
+        description: 'Ceph block device driver')
++option('vitastor', type : 'feature', value : 'auto',
++       description: 'Vitastor block device driver')
+ option('gtk', type : 'feature', value : 'auto',
+        description: 'GTK+ user interface')
+ option('sdl', type : 'feature', value : 'auto',

patches/qemu-3.1-vitastor.patch

@@ -1,7 +1,107 @@
-Index: qemu-3.1+dfsg/qapi/block-core.json
-===================================================================
---- qemu-3.1+dfsg.orig/qapi/block-core.json
-+++ qemu-3.1+dfsg/qapi/block-core.json
+diff --git a/block/Makefile.objs b/block/Makefile.objs
+index 46d585cfd0..62222f25fe 100644
+--- a/block/Makefile.objs
++++ b/block/Makefile.objs
+@@ -29,6 +29,7 @@ block-obj-$(if $(CONFIG_LIBISCSI),y,n) += iscsi-opts.o
+ block-obj-$(CONFIG_LIBNFS) += nfs.o
+ block-obj-$(CONFIG_CURL) += curl.o
+ block-obj-$(CONFIG_RBD) += rbd.o
++block-obj-$(CONFIG_VITASTOR) += vitastor.o
+ block-obj-$(CONFIG_GLUSTERFS) += gluster.o
+ block-obj-$(CONFIG_VXHS) += vxhs.o
+ block-obj-$(CONFIG_LIBSSH2) += ssh.o
+@@ -49,6 +50,8 @@ curl.o-cflags      := $(CURL_CFLAGS)
+ curl.o-libs        := $(CURL_LIBS)
+ rbd.o-cflags       := $(RBD_CFLAGS)
+ rbd.o-libs         := $(RBD_LIBS)
++vitastor.o-cflags  := $(VITASTOR_CFLAGS)
++vitastor.o-libs    := $(VITASTOR_LIBS)
+ gluster.o-cflags   := $(GLUSTERFS_CFLAGS)
+ gluster.o-libs     := $(GLUSTERFS_LIBS)
+ vxhs.o-libs        := $(VXHS_LIBS)
+diff --git a/configure b/configure
+index 1c9f6090e8..25ef89c33a 100755
+--- a/configure
++++ b/configure
+@@ -422,6 +422,7 @@ trace_backends="log"
+ trace_file="trace"
+ spice=""
+ rbd=""
++vitastor=""
+ smartcard=""
+ libusb=""
+ usb_redir=""
+@@ -1282,6 +1283,10 @@ for opt do
+   ;;
+   --enable-rbd) rbd="yes"
+   ;;
++  --disable-vitastor) vitastor="no"
++  ;;
++  --enable-vitastor) vitastor="yes"
++  ;;
+   --disable-xfsctl) xfs="no"
+   ;;
+   --enable-xfsctl) xfs="yes"
+@@ -1737,6 +1742,7 @@ disabled with --disable-FEATURE, default is enabled if available:
+   vhost-crypto    vhost-crypto acceleration support
+   spice           spice
+   rbd             rados block device (rbd)
++  vitastor        vitastor block device
+   libiscsi        iscsi support
+   libnfs          nfs support
+   smartcard       smartcard support (libcacard)
+@@ -3722,6 +3728,27 @@ EOF
+   fi
+ fi
+ 
++##########################################
++# vitastor probe
++if test "$vitastor" != "no" ; then
++  cat > $TMPC <<EOF
++#include <vitastor_c.h>
++int main(void) {
++  vitastor_c_create_qemu(0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0);
++  return 0;
++}
++EOF
++  vitastor_libs="-lvitastor_client"
++  if compile_prog "" "$vitastor_libs" ; then
++    vitastor=yes
++  else
++    if test "$vitastor" = "yes" ; then
++      feature_not_found "vitastor block device" "Install vitastor-client-dev"
++    fi
++    vitastor=no
++  fi
++fi
++
+ ##########################################
+ # libssh2 probe
+ min_libssh2_version=1.2.8
+@@ -6109,6 +6136,7 @@ echo "Trace output file $trace_file-<pid>"
+ fi
+ echo "spice support     $spice $(echo_version $spice $spice_protocol_version/$spice_server_version)"
+ echo "rbd support       $rbd"
++echo "vitastor support  $vitastor"
+ echo "xfsctl support    $xfs"
+ echo "smartcard support $smartcard"
+ echo "libusb            $libusb"
+@@ -6694,6 +6722,11 @@ if test "$rbd" = "yes" ; then
+   echo "RBD_CFLAGS=$rbd_cflags" >> $config_host_mak
+   echo "RBD_LIBS=$rbd_libs" >> $config_host_mak
+ fi
++if test "$vitastor" = "yes" ; then
++  echo "CONFIG_VITASTOR=m" >> $config_host_mak
++  echo "VITASTOR_CFLAGS=$vitastor_cflags" >> $config_host_mak
++  echo "VITASTOR_LIBS=$vitastor_libs" >> $config_host_mak
++fi
+ 
+ echo "CONFIG_COROUTINE_BACKEND=$coroutine" >> $config_host_mak
+ if test "$coroutine_pool" = "yes" ; then
+diff --git a/qapi/block-core.json b/qapi/block-core.json
+index d4fe710836..dbad3327b3 100644
+--- a/qapi/block-core.json
++++ b/qapi/block-core.json
 @@ -2617,7 +2617,7 @@
  ##
  { 'enum': 'BlockdevDriver',
@@ -11,10 +111,11 @@ Index: qemu-3.1+dfsg/qapi/block-core.json
              'host_cdrom', 'host_device', 'http', 'https', 'iscsi', 'luks',
              'nbd', 'nfs', 'null-aio', 'null-co', 'nvme', 'parallels', 'qcow',
              'qcow2', 'qed', 'quorum', 'raw', 'rbd', 'replication', 'sheepdog',
-@@ -3367,6 +3367,28 @@
+@@ -3366,6 +3366,28 @@
+             '*snap-id': 'uint32',
              '*tag': 'str' } }
  
- ##
++##
 +# @BlockdevOptionsVitastor:
 +#
 +# Driver specific block device options for vitastor
@@ -23,24 +124,23 @@ Index: qemu-3.1+dfsg/qapi/block-core.json
 +# @inode:       Inode number
 +# @pool:        Pool ID
 +# @size:        Desired image size in bytes
-+# @config_path: Path to Vitastor configuration
-+# @etcd_host:   etcd connection address(es)
-+# @etcd_prefix: etcd key/value prefix
++# @config-path: Path to Vitastor configuration
++# @etcd-host:   etcd connection address(es)
++# @etcd-prefix: etcd key/value prefix
 +##
 +{ 'struct': 'BlockdevOptionsVitastor',
 +  'data': { '*inode': 'uint64',
 +            '*pool': 'uint64',
 +            '*size': 'uint64',
 +            '*image': 'str',
-+            '*config_path': 'str',
-+            '*etcd_host': 'str',
-+            '*etcd_prefix': 'str' } }
++            '*config-path': 'str',
++            '*etcd-host': 'str',
++            '*etcd-prefix': 'str' } }
 +
-+##
+ ##
  # @ReplicationMode:
  #
- # An enumeration of replication modes.
-@@ -3713,6 +3731,7 @@
+@@ -3713,6 +3735,7 @@
        'rbd':        'BlockdevOptionsRbd',
        'replication':'BlockdevOptionsReplication',
        'sheepdog':   'BlockdevOptionsSheepdog',
@@ -48,10 +148,11 @@ Index: qemu-3.1+dfsg/qapi/block-core.json
        'ssh':        'BlockdevOptionsSsh',
        'throttle':   'BlockdevOptionsThrottle',
        'vdi':        'BlockdevOptionsGenericFormat',
-@@ -4158,6 +4177,17 @@
+@@ -4157,6 +4180,17 @@
+             '*subformat':           'BlockdevVhdxSubformat',
              '*block-state-zero':    'bool' } }
  
- ##
++##
 +# @BlockdevCreateOptionsVitastor:
 +#
 +# Driver specific image creation options for Vitastor.
@@ -62,11 +163,10 @@ Index: qemu-3.1+dfsg/qapi/block-core.json
 +  'data': { 'location':         'BlockdevOptionsVitastor',
 +            'size':             'size' } }
 +
-+##
+ ##
  # @BlockdevVpcSubformat:
  #
- # @dynamic: Growing image file
-@@ -4212,6 +4242,7 @@
+@@ -4212,6 +4246,7 @@
        'qed':            'BlockdevCreateOptionsQed',
        'rbd':            'BlockdevCreateOptionsRbd',
        'sheepdog':       'BlockdevCreateOptionsSheepdog',
@@ -74,15 +174,3 @@ Index: qemu-3.1+dfsg/qapi/block-core.json
        'ssh':            'BlockdevCreateOptionsSsh',
        'vdi':            'BlockdevCreateOptionsVdi',
        'vhdx':           'BlockdevCreateOptionsVhdx',
-Index: qemu-3.1+dfsg/scripts/modules/module_block.py
-===================================================================
---- qemu-3.1+dfsg.orig/scripts/modules/module_block.py
-+++ qemu-3.1+dfsg/scripts/modules/module_block.py
-@@ -88,6 +88,7 @@ def print_bottom(fheader):
- output_file = sys.argv[1]
- with open(output_file, 'w') as fheader:
-     print_top(fheader)
-+    add_module(fheader, "vitastor", "vitastor", "vitastor")
- 
-     for filename in sys.argv[2:]:
-         if os.path.isfile(filename):

patches/qemu-4.2-vitastor.patch

@@ -1,8 +1,105 @@
-Index: qemu/qapi/block-core.json
-===================================================================
---- qemu.orig/qapi/block-core.json	2020-11-07 22:57:38.932613674 +0000
-+++ qemu.orig/qapi/block-core.json	2020-11-07 22:59:49.890722862 +0000
-@@ -2907,7 +2907,7 @@
+diff -NaurpbB qemu-4.2.0/block/Makefile.objs qemu-4.2.0-vitastor/block/Makefile.objs
+--- qemu-4.2.0/block/Makefile.objs	2019-12-12 18:20:47.000000000 +0000
++++ qemu-4.2.0-vitastor/block/Makefile.objs	2021-12-01 21:28:47.342341760 +0000
+@@ -29,6 +29,7 @@ block-obj-$(if $(CONFIG_LIBISCSI),y,n) +
+ block-obj-$(CONFIG_LIBNFS) += nfs.o
+ block-obj-$(CONFIG_CURL) += curl.o
+ block-obj-$(CONFIG_RBD) += rbd.o
++block-obj-$(CONFIG_VITASTOR) += vitastor.o
+ block-obj-$(CONFIG_GLUSTERFS) += gluster.o
+ block-obj-$(CONFIG_VXHS) += vxhs.o
+ block-obj-$(CONFIG_LIBSSH) += ssh.o
+@@ -53,6 +54,8 @@ curl.o-cflags      := $(CURL_CFLAGS)
+ curl.o-libs        := $(CURL_LIBS)
+ rbd.o-cflags       := $(RBD_CFLAGS)
+ rbd.o-libs         := $(RBD_LIBS)
++vitastor.o-cflags  := $(VITASTOR_CFLAGS)
++vitastor.o-libs    := $(VITASTOR_LIBS)
+ gluster.o-cflags   := $(GLUSTERFS_CFLAGS)
+ gluster.o-libs     := $(GLUSTERFS_LIBS)
+ vxhs.o-libs        := $(VXHS_LIBS)
+diff -NaurpbB qemu-4.2.0/configure qemu-4.2.0-vitastor/configure
+--- qemu-4.2.0/configure	2019-12-12 18:20:47.000000000 +0000
++++ qemu-4.2.0-vitastor/configure	2021-12-01 21:30:24.605237562 +0000
+@@ -435,6 +435,7 @@ trace_backends="log"
+ trace_file="trace"
+ spice=""
+ rbd=""
++vitastor=""
+ smartcard=""
+ libusb=""
+ usb_redir=""
+@@ -1312,6 +1313,10 @@ for opt do
+   ;;
+   --enable-rbd) rbd="yes"
+   ;;
++  --disable-vitastor) vitastor="no"
++  ;;
++  --enable-vitastor) vitastor="yes"
++  ;;
+   --disable-xfsctl) xfs="no"
+   ;;
+   --enable-xfsctl) xfs="yes"
+@@ -1782,6 +1787,7 @@ disabled with --disable-FEATURE, default
+   vhost-user      vhost-user backend support
+   spice           spice
+   rbd             rados block device (rbd)
++  vitastor        vitastor block device
+   libiscsi        iscsi support
+   libnfs          nfs support
+   smartcard       smartcard support (libcacard)
+@@ -3980,6 +3986,27 @@ EOF
+ fi
+ 
+ ##########################################
++# vitastor probe
++if test "$vitastor" != "no" ; then
++  cat > $TMPC <<EOF
++#include <vitastor_c.h>
++int main(void) {
++  vitastor_c_create_qemu(0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0);
++  return 0;
++}
++EOF
++  vitastor_libs="-lvitastor_client"
++  if compile_prog "" "$vitastor_libs" ; then
++    vitastor=yes
++  else
++    if test "$vitastor" = "yes" ; then
++      feature_not_found "vitastor block device" "Install vitastor-client-dev"
++    fi
++    vitastor=no
++  fi
++fi
++
++##########################################
+ # libssh probe
+ if test "$libssh" != "no" ; then
+   if $pkg_config --exists libssh; then
+@@ -6549,6 +6576,7 @@ echo "Trace output file $trace_file-<pid
+ fi
+ echo "spice support     $spice $(echo_version $spice $spice_protocol_version/$spice_server_version)"
+ echo "rbd support       $rbd"
++echo "vitastor support  $vitastor"
+ echo "xfsctl support    $xfs"
+ echo "smartcard support $smartcard"
+ echo "libusb            $libusb"
+@@ -7182,6 +7210,11 @@ if test "$rbd" = "yes" ; then
+   echo "RBD_CFLAGS=$rbd_cflags" >> $config_host_mak
+   echo "RBD_LIBS=$rbd_libs" >> $config_host_mak
+ fi
++if test "$vitastor" = "yes" ; then
++  echo "CONFIG_VITASTOR=m" >> $config_host_mak
++  echo "VITASTOR_CFLAGS=$vitastor_cflags" >> $config_host_mak
++  echo "VITASTOR_LIBS=$vitastor_libs" >> $config_host_mak
++fi
+ 
+ echo "CONFIG_COROUTINE_BACKEND=$coroutine" >> $config_host_mak
+ if test "$coroutine_pool" = "yes" ; then
+diff -NaurpbB qemu-4.2.0/qapi/block-core.json qemu-4.2.0-vitastor/qapi/block-core.json
+--- qemu-4.2.0/qapi/block-core.json	2019-12-12 18:20:48.000000000 +0000
++++ qemu-4.2.0-vitastor/qapi/block-core.json	2021-12-01 21:27:49.213574396 +0000
+@@ -2894,7 +2894,7 @@
              'nbd', 'nfs', 'null-aio', 'null-co', 'nvme', 'parallels', 'qcow',
              'qcow2', 'qed', 'quorum', 'raw', 'rbd',
              { 'name': 'replication', 'if': 'defined(CONFIG_REPLICATION)' },
@@ -11,7 +108,7 @@ Index: qemu/qapi/block-core.json
              'ssh', 'throttle', 'vdi', 'vhdx', 'vmdk', 'vpc', 'vvfat', 'vxhs' ] }
  
  ##
-@@ -3725,6 +3725,28 @@
+@@ -3712,6 +3712,28 @@
              '*tag': 'str' } }
  
  ##
@@ -23,24 +120,24 @@ Index: qemu/qapi/block-core.json
 +# @inode:       Inode number
 +# @pool:        Pool ID
 +# @size:        Desired image size in bytes
-+# @config_path: Path to Vitastor configuration
-+# @etcd_host:   etcd connection address(es)
-+# @etcd_prefix: etcd key/value prefix
++# @config-path: Path to Vitastor configuration
++# @etcd-host:   etcd connection address(es)
++# @etcd-prefix: etcd key/value prefix
 +##
 +{ 'struct': 'BlockdevOptionsVitastor',
 +  'data': { '*inode': 'uint64',
 +            '*pool': 'uint64',
 +            '*size': 'uint64',
 +            '*image': 'str',
-+            '*config_path': 'str',
-+            '*etcd_host': 'str',
-+            '*etcd_prefix': 'str' } }
++            '*config-path': 'str',
++            '*etcd-host': 'str',
++            '*etcd-prefix': 'str' } }
 +
 +##
  # @ReplicationMode:
  #
  # An enumeration of replication modes.
-@@ -4084,6 +4102,7 @@
+@@ -4071,6 +4093,7 @@
        'replication': { 'type': 'BlockdevOptionsReplication',
                         'if': 'defined(CONFIG_REPLICATION)' },
        'sheepdog':   'BlockdevOptionsSheepdog',
@@ -48,7 +145,7 @@ Index: qemu/qapi/block-core.json
        'ssh':        'BlockdevOptionsSsh',
        'throttle':   'BlockdevOptionsThrottle',
        'vdi':        'BlockdevOptionsGenericFormat',
-@@ -4461,6 +4480,17 @@
+@@ -4441,6 +4464,17 @@
              '*cluster-size' :   'size' } }
  
  ##
@@ -66,7 +163,7 @@ Index: qemu/qapi/block-core.json
  # @BlockdevVmdkSubformat:
  #
  # Subformat options for VMDK images
-@@ -4722,6 +4752,7 @@
+@@ -4702,6 +4736,7 @@
        'qed':            'BlockdevCreateOptionsQed',
        'rbd':            'BlockdevCreateOptionsRbd',
        'sheepdog':       'BlockdevCreateOptionsSheepdog',
@@ -74,15 +171,3 @@ Index: qemu/qapi/block-core.json
        'ssh':            'BlockdevCreateOptionsSsh',
        'vdi':            'BlockdevCreateOptionsVdi',
        'vhdx':           'BlockdevCreateOptionsVhdx',
-Index: qemu/scripts/modules/module_block.py
-===================================================================
---- qemu.orig/scripts/modules/module_block.py	2020-11-07 22:57:38.936613739 +0000
-+++ qemu/scripts/modules/module_block.py	2020-11-07 22:59:49.890722862 +0000
-@@ -86,6 +86,7 @@ def print_bottom(fheader):
- output_file = sys.argv[1]
- with open(output_file, 'w') as fheader:
-     print_top(fheader)
-+    add_module(fheader, "vitastor", "vitastor", "vitastor")
- 
-     for filename in sys.argv[2:]:
-         if os.path.isfile(filename):

patches/qemu-5.0-vitastor.patch

@@ -1,7 +1,107 @@
-Index: qemu/qapi/block-core.json
-===================================================================
---- qemu.orig/qapi/block-core.json
-+++ qemu/qapi/block-core.json
+diff --git a/block/Makefile.objs b/block/Makefile.objs
+index 3635b6b4c1..6cdf6df6ff 100644
+--- a/block/Makefile.objs
++++ b/block/Makefile.objs
+@@ -30,6 +30,7 @@ block-obj-$(if $(CONFIG_LIBISCSI),y,n) += iscsi-opts.o
+ block-obj-$(CONFIG_LIBNFS) += nfs.o
+ block-obj-$(CONFIG_CURL) += curl.o
+ block-obj-$(CONFIG_RBD) += rbd.o
++block-obj-$(CONFIG_VITASTOR) += vitastor.o
+ block-obj-$(CONFIG_GLUSTERFS) += gluster.o
+ block-obj-$(CONFIG_VXHS) += vxhs.o
+ block-obj-$(CONFIG_LIBSSH) += ssh.o
+@@ -58,6 +59,8 @@ curl.o-cflags      := $(CURL_CFLAGS)
+ curl.o-libs        := $(CURL_LIBS)
+ rbd.o-cflags       := $(RBD_CFLAGS)
+ rbd.o-libs         := $(RBD_LIBS)
++vitastor.o-cflags  := $(VITASTOR_CFLAGS)
++vitastor.o-libs    := $(VITASTOR_LIBS)
+ gluster.o-cflags   := $(GLUSTERFS_CFLAGS)
+ gluster.o-libs     := $(GLUSTERFS_LIBS)
+ vxhs.o-libs        := $(VXHS_LIBS)
+diff --git a/configure b/configure
+index 23b5e93752..7400cb9546 100755
+--- a/configure
++++ b/configure
+@@ -438,6 +438,7 @@ trace_backends="log"
+ trace_file="trace"
+ spice=""
+ rbd=""
++vitastor=""
+ smartcard=""
+ libusb=""
+ usb_redir=""
+@@ -1355,6 +1356,10 @@ for opt do
+   ;;
+   --enable-rbd) rbd="yes"
+   ;;
++  --disable-vitastor) vitastor="no"
++  ;;
++  --enable-vitastor) vitastor="yes"
++  ;;
+   --disable-xfsctl) xfs="no"
+   ;;
+   --enable-xfsctl) xfs="yes"
+@@ -1848,6 +1853,7 @@ disabled with --disable-FEATURE, default is enabled if available:
+   vhost-user      vhost-user backend support
+   spice           spice
+   rbd             rados block device (rbd)
++  vitastor        vitastor block device
+   libiscsi        iscsi support
+   libnfs          nfs support
+   smartcard       smartcard support (libcacard)
+@@ -4088,6 +4094,27 @@ EOF
+   fi
+ fi
+ 
++##########################################
++# vitastor probe
++if test "$vitastor" != "no" ; then
++  cat > $TMPC <<EOF
++#include <vitastor_c.h>
++int main(void) {
++  vitastor_c_create_qemu(0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0);
++  return 0;
++}
++EOF
++  vitastor_libs="-lvitastor_client"
++  if compile_prog "" "$vitastor_libs" ; then
++    vitastor=yes
++  else
++    if test "$vitastor" = "yes" ; then
++      feature_not_found "vitastor block device" "Install vitastor-client-dev"
++    fi
++    vitastor=no
++  fi
++fi
++
+ ##########################################
+ # libssh probe
+ if test "$libssh" != "no" ; then
+@@ -6679,6 +6706,7 @@ echo "Trace output file $trace_file-<pid>"
+ fi
+ echo "spice support     $spice $(echo_version $spice $spice_protocol_version/$spice_server_version)"
+ echo "rbd support       $rbd"
++echo "vitastor support  $vitastor"
+ echo "xfsctl support    $xfs"
+ echo "smartcard support $smartcard"
+ echo "libusb            $libusb"
+@@ -7329,6 +7357,11 @@ if test "$rbd" = "yes" ; then
+   echo "RBD_CFLAGS=$rbd_cflags" >> $config_host_mak
+   echo "RBD_LIBS=$rbd_libs" >> $config_host_mak
+ fi
++if test "$vitastor" = "yes" ; then
++  echo "CONFIG_VITASTOR=m" >> $config_host_mak
++  echo "VITASTOR_CFLAGS=$vitastor_cflags" >> $config_host_mak
++  echo "VITASTOR_LIBS=$vitastor_libs" >> $config_host_mak
++fi
+ 
+ echo "CONFIG_COROUTINE_BACKEND=$coroutine" >> $config_host_mak
+ if test "$coroutine_pool" = "yes" ; then
+diff --git a/qapi/block-core.json b/qapi/block-core.json
+index 943df1926a..c4f23230a3 100644
+--- a/qapi/block-core.json
++++ b/qapi/block-core.json
 @@ -2798,7 +2798,7 @@
              'luks', 'nbd', 'nfs', 'null-aio', 'null-co', 'nvme', 'parallels',
              'qcow', 'qcow2', 'qed', 'quorum', 'raw', 'rbd',
@@ -11,10 +111,11 @@ Index: qemu/qapi/block-core.json
              'ssh', 'throttle', 'vdi', 'vhdx', 'vmdk', 'vpc', 'vvfat', 'vxhs' ] }
  
  ##
-@@ -3635,6 +3635,28 @@
+@@ -3634,6 +3634,28 @@
+             '*snap-id': 'uint32',
              '*tag': 'str' } }
  
- ##
++##
 +# @BlockdevOptionsVitastor:
 +#
 +# Driver specific block device options for vitastor
@@ -23,24 +124,23 @@ Index: qemu/qapi/block-core.json
 +# @inode:       Inode number
 +# @pool:        Pool ID
 +# @size:        Desired image size in bytes
-+# @config_path: Path to Vitastor configuration
-+# @etcd_host:   etcd connection address(es)
-+# @etcd_prefix: etcd key/value prefix
++# @config-path: Path to Vitastor configuration
++# @etcd-host:   etcd connection address(es)
++# @etcd-prefix: etcd key/value prefix
 +##
 +{ 'struct': 'BlockdevOptionsVitastor',
 +  'data': { '*inode': 'uint64',
 +            '*pool': 'uint64',
 +            '*size': 'uint64',
 +            '*image': 'str',
-+            '*config_path': 'str',
-+            '*etcd_host': 'str',
-+            '*etcd_prefix': 'str' } }
++            '*config-path': 'str',
++            '*etcd-host': 'str',
++            '*etcd-prefix': 'str' } }
 +
-+##
+ ##
  # @ReplicationMode:
  #
- # An enumeration of replication modes.
-@@ -3995,6 +4013,7 @@
+@@ -3995,6 +4017,7 @@
        'replication': { 'type': 'BlockdevOptionsReplication',
                         'if': 'defined(CONFIG_REPLICATION)' },
        'sheepdog':   'BlockdevOptionsSheepdog',
@@ -48,10 +148,11 @@ Index: qemu/qapi/block-core.json
        'ssh':        'BlockdevOptionsSsh',
        'throttle':   'BlockdevOptionsThrottle',
        'vdi':        'BlockdevOptionsGenericFormat',
-@@ -4365,6 +4384,17 @@
+@@ -4364,6 +4387,17 @@
+             'size':             'size',
              '*cluster-size' :   'size' } }
  
- ##
++##
 +# @BlockdevCreateOptionsVitastor:
 +#
 +# Driver specific image creation options for Vitastor.
@@ -62,11 +163,10 @@ Index: qemu/qapi/block-core.json
 +  'data': { 'location':         'BlockdevOptionsVitastor',
 +            'size':             'size' } }
 +
-+##
+ ##
  # @BlockdevVmdkSubformat:
  #
- # Subformat options for VMDK images
-@@ -4626,6 +4656,7 @@
+@@ -4626,6 +4660,7 @@
        'qed':            'BlockdevCreateOptionsQed',
        'rbd':            'BlockdevCreateOptionsRbd',
        'sheepdog':       'BlockdevCreateOptionsSheepdog',
@@ -74,15 +174,3 @@ Index: qemu/qapi/block-core.json
        'ssh':            'BlockdevCreateOptionsSsh',
        'vdi':            'BlockdevCreateOptionsVdi',
        'vhdx':           'BlockdevCreateOptionsVhdx',
-Index: qemu/scripts/modules/module_block.py
-===================================================================
---- qemu.orig/scripts/modules/module_block.py
-+++ qemu/scripts/modules/module_block.py
-@@ -85,6 +85,7 @@ def print_bottom(fheader):
- output_file = sys.argv[1]
- with open(output_file, 'w') as fheader:
-     print_top(fheader)
-+    add_module(fheader, "vitastor", "vitastor", "vitastor")
- 
-     for filename in sys.argv[2:]:
-         if os.path.isfile(filename):

patches/qemu-5.1-vitastor.patch

@@ -1,8 +1,8 @@
-Index: qemu-5.1+dfsg/qapi/block-core.json
+Index: qemu-5.2+dfsg/qapi/block-core.json
 ===================================================================
---- qemu-5.1+dfsg.orig/qapi/block-core.json
-+++ qemu-5.1+dfsg/qapi/block-core.json
-@@ -2807,7 +2807,7 @@
+--- qemu-5.2+dfsg.orig/qapi/block-core.json
++++ qemu-5.2+dfsg/qapi/block-core.json
+@@ -2831,7 +2831,7 @@
              'luks', 'nbd', 'nfs', 'null-aio', 'null-co', 'nvme', 'parallels',
              'qcow', 'qcow2', 'qed', 'quorum', 'raw', 'rbd',
              { 'name': 'replication', 'if': 'defined(CONFIG_REPLICATION)' },
@@ -11,7 +11,7 @@ Index: qemu-5.1+dfsg/qapi/block-core.json
              'ssh', 'throttle', 'vdi', 'vhdx', 'vmdk', 'vpc', 'vvfat' ] }
  
  ##
-@@ -3644,6 +3644,28 @@
+@@ -3668,6 +3668,28 @@
              '*tag': 'str' } }
  
  ##
@@ -23,24 +23,24 @@ Index: qemu-5.1+dfsg/qapi/block-core.json
 +# @inode:       Inode number
 +# @pool:        Pool ID
 +# @size:        Desired image size in bytes
-+# @config_path: Path to Vitastor configuration
-+# @etcd_host:   etcd connection address(es)
-+# @etcd_prefix: etcd key/value prefix
++# @config-path: Path to Vitastor configuration
++# @etcd-host:   etcd connection address(es)
++# @etcd-prefix: etcd key/value prefix
 +##
 +{ 'struct': 'BlockdevOptionsVitastor',
 +  'data': { '*inode': 'uint64',
 +            '*pool': 'uint64',
 +            '*size': 'uint64',
 +            '*image': 'str',
-+            '*config_path': 'str',
-+            '*etcd_host': 'str',
-+            '*etcd_prefix': 'str' } }
++            '*config-path': 'str',
++            '*etcd-host': 'str',
++            '*etcd-prefix': 'str' } }
 +
 +##
  # @ReplicationMode:
  #
  # An enumeration of replication modes.
-@@ -3988,6 +4006,7 @@
+@@ -4015,6 +4037,7 @@
        'replication': { 'type': 'BlockdevOptionsReplication',
                         'if': 'defined(CONFIG_REPLICATION)' },
        'sheepdog':   'BlockdevOptionsSheepdog',
@@ -48,7 +48,7 @@ Index: qemu-5.1+dfsg/qapi/block-core.json
        'ssh':        'BlockdevOptionsSsh',
        'throttle':   'BlockdevOptionsThrottle',
        'vdi':        'BlockdevOptionsGenericFormat',
-@@ -4376,6 +4395,17 @@
+@@ -4404,6 +4427,17 @@
              '*cluster-size' :   'size' } }
  
  ##
@@ -66,7 +66,7 @@ Index: qemu-5.1+dfsg/qapi/block-core.json
  # @BlockdevVmdkSubformat:
  #
  # Subformat options for VMDK images
-@@ -4637,6 +4667,7 @@
+@@ -4665,6 +4699,7 @@
        'qed':            'BlockdevCreateOptionsQed',
        'rbd':            'BlockdevCreateOptionsRbd',
        'sheepdog':       'BlockdevCreateOptionsSheepdog',
@@ -74,15 +74,108 @@ Index: qemu-5.1+dfsg/qapi/block-core.json
        'ssh':            'BlockdevCreateOptionsSsh',
        'vdi':            'BlockdevCreateOptionsVdi',
        'vhdx':           'BlockdevCreateOptionsVhdx',
-Index: qemu-5.1+dfsg/scripts/modules/module_block.py
+Index: qemu-5.2+dfsg/block/meson.build
 ===================================================================
---- qemu-5.1+dfsg.orig/scripts/modules/module_block.py
-+++ qemu-5.1+dfsg/scripts/modules/module_block.py
-@@ -86,6 +86,7 @@ if __name__ == '__main__':
-     output_file = sys.argv[1]
-     with open(output_file, 'w') as fheader:
-         print_top(fheader)
-+        add_module(fheader, "vitastor", "vitastor", "vitastor")
+--- qemu-5.2+dfsg.orig/block/meson.build
++++ qemu-5.2+dfsg/block/meson.build
+@@ -76,6 +76,7 @@ foreach m : [
+   ['CONFIG_LIBNFS', 'nfs', libnfs, 'nfs.c'],
+   ['CONFIG_LIBSSH', 'ssh', libssh, 'ssh.c'],
+   ['CONFIG_RBD', 'rbd', rbd, 'rbd.c'],
++  ['CONFIG_VITASTOR', 'vitastor', vitastor, 'vitastor.c'],
+ ]
+   if config_host.has_key(m[0])
+     if enable_modules
+Index: qemu-5.2+dfsg/configure
+===================================================================
+--- qemu-5.2+dfsg.orig/configure
++++ qemu-5.2+dfsg/configure
+@@ -372,6 +372,7 @@ trace_backends="log"
+ trace_file="trace"
+ spice=""
+ rbd=""
++vitastor=""
+ smartcard=""
+ u2f="auto"
+ libusb=""
+@@ -1263,6 +1264,10 @@ for opt do
+   ;;
+   --enable-rbd) rbd="yes"
+   ;;
++  --disable-vitastor) vitastor="no"
++  ;;
++  --enable-vitastor) vitastor="yes"
++  ;;
+   --disable-xfsctl) xfs="no"
+   ;;
+   --enable-xfsctl) xfs="yes"
+@@ -1827,6 +1832,7 @@ disabled with --disable-FEATURE, default
+   vhost-vdpa      vhost-vdpa kernel backend support
+   spice           spice
+   rbd             rados block device (rbd)
++  vitastor        vitastor block device
+   libiscsi        iscsi support
+   libnfs          nfs support
+   smartcard       smartcard support (libcacard)
+@@ -3719,6 +3725,27 @@ EOF
+ fi
  
-         for filename in sys.argv[2:]:
-             if os.path.isfile(filename):
+ ##########################################
++# vitastor probe
++if test "$vitastor" != "no" ; then
++  cat > $TMPC <<EOF
++#include <vitastor_c.h>
++int main(void) {
++  vitastor_c_create_qemu(0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0);
++  return 0;
++}
++EOF
++  vitastor_libs="-lvitastor_client"
++  if compile_prog "" "$vitastor_libs" ; then
++    vitastor=yes
++  else
++    if test "$vitastor" = "yes" ; then
++      feature_not_found "vitastor block device" "Install vitastor-client-dev"
++    fi
++    vitastor=no
++  fi
++fi
++
++##########################################
+ # libssh probe
+ if test "$libssh" != "no" ; then
+   if $pkg_config --exists libssh; then
+@@ -6456,6 +6483,10 @@ if test "$rbd" = "yes" ; then
+   echo "CONFIG_RBD=y" >> $config_host_mak
+   echo "RBD_LIBS=$rbd_libs" >> $config_host_mak
+ fi
++if test "$vitastor" = "yes" ; then
++  echo "CONFIG_VITASTOR=y" >> $config_host_mak
++  echo "VITASTOR_LIBS=$vitastor_libs" >> $config_host_mak
++fi
+ 
+ echo "CONFIG_COROUTINE_BACKEND=$coroutine" >> $config_host_mak
+ if test "$coroutine_pool" = "yes" ; then
+Index: qemu-5.2+dfsg/meson.build
+===================================================================
+--- qemu-5.2+dfsg.orig/meson.build
++++ qemu-5.2+dfsg/meson.build
+@@ -596,6 +596,10 @@ rbd = not_found
+ if 'CONFIG_RBD' in config_host
+   rbd = declare_dependency(link_args: config_host['RBD_LIBS'].split())
+ endif
++vitastor = not_found
++if 'CONFIG_VITASTOR' in config_host
++  vitastor = declare_dependency(link_args: config_host['VITASTOR_LIBS'].split())
++endif
+ glusterfs = not_found
+ if 'CONFIG_GLUSTERFS' in config_host
+   glusterfs = declare_dependency(compile_args: config_host['GLUSTERFS_CFLAGS'].split(),
+@@ -2145,6 +2149,7 @@ endif
+ # TODO: add back protocol and server version
+ summary_info += {'spice support':     config_host.has_key('CONFIG_SPICE')}
+ summary_info += {'rbd support':       config_host.has_key('CONFIG_RBD')}
++summary_info += {'vitastor support':  config_host.has_key('CONFIG_VITASTOR')}
+ summary_info += {'xfsctl support':    config_host.has_key('CONFIG_XFS')}
+ summary_info += {'smartcard support': config_host.has_key('CONFIG_SMARTCARD')}
+ summary_info += {'U2F support':       u2f.found()}

patches/qemu-6.0-vitastor.patch

@@ -0,0 +1,188 @@
+diff --git a/block/meson.build b/block/meson.build
+index d21990ec95..385ac37732 100644
+--- a/block/meson.build
++++ b/block/meson.build
+@@ -78,6 +78,7 @@ foreach m : [
+   [libnfs, 'nfs', libnfs, 'nfs.c'],
+   [libssh, 'ssh', libssh, 'ssh.c'],
+   [rbd, 'rbd', rbd, 'rbd.c'],
++  [vitastor, 'vitastor', vitastor, 'vitastor.c'],
+ ]
+   if m[0].found()
+     if enable_modules
+diff --git a/configure b/configure
+index c77f7b1020..5f534e8484 100755
+--- a/configure
++++ b/configure
+@@ -389,6 +389,7 @@ trace_backends="log"
+ trace_file="trace"
+ spice="$default_feature"
+ rbd="auto"
++vitastor="auto"
+ smartcard="$default_feature"
+ u2f="auto"
+ libusb="$default_feature"
+@@ -1280,6 +1281,10 @@ for opt do
+   ;;
+   --enable-rbd) rbd="enabled"
+   ;;
++  --disable-vitastor) vitastor="disabled"
++  ;;
++  --enable-vitastor) vitastor="enabled"
++  ;;
+   --disable-xfsctl) xfs="no"
+   ;;
+   --enable-xfsctl) xfs="yes"
+@@ -1867,6 +1872,7 @@ disabled with --disable-FEATURE, default is enabled if available
+   vhost-vdpa      vhost-vdpa kernel backend support
+   spice           spice
+   rbd             rados block device (rbd)
++  vitastor        vitastor block device
+   libiscsi        iscsi support
+   libnfs          nfs support
+   smartcard       smartcard support (libcacard)
+@@ -6423,7 +6429,7 @@ NINJA=$ninja $meson setup \
+         -Dcapstone=$capstone -Dslirp=$slirp -Dfdt=$fdt -Dbrlapi=$brlapi \
+         -Dcurl=$curl -Dglusterfs=$glusterfs -Dbzip2=$bzip2 -Dlibiscsi=$libiscsi \
+         -Dlibnfs=$libnfs -Diconv=$iconv -Dcurses=$curses -Dlibudev=$libudev\
+-        -Drbd=$rbd -Dlzo=$lzo -Dsnappy=$snappy -Dlzfse=$lzfse \
++        -Drbd=$rbd -Dvitastor=$vitastor -Dlzo=$lzo -Dsnappy=$snappy -Dlzfse=$lzfse \
+         -Dzstd=$zstd -Dseccomp=$seccomp -Dvirtfs=$virtfs -Dcap_ng=$cap_ng \
+         -Dattr=$attr -Ddefault_devices=$default_devices \
+         -Ddocs=$docs -Dsphinx_build=$sphinx_build -Dinstall_blobs=$blobs \
+diff --git a/meson.build b/meson.build
+index c6f4b0cf5e..3dc7f7b463 100644
+--- a/meson.build
++++ b/meson.build
+@@ -720,6 +720,26 @@ if not get_option('rbd').auto() or have_block
+   endif
+ endif
+ 
++vitastor = not_found
++if not get_option('vitastor').auto() or have_block
++  libvitastor_client = cc.find_library('vitastor_client', has_headers: ['vitastor_c.h'],
++    required: get_option('vitastor'), kwargs: static_kwargs)
++  if libvitastor_client.found()
++    if cc.links('''
++      #include <vitastor_c.h>
++      int main(void) {
++        vitastor_c_create_qemu(0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0);
++        return 0;
++      }''', dependencies: libvitastor_client)
++      vitastor = declare_dependency(dependencies: libvitastor_client)
++    elif get_option('vitastor').enabled()
++      error('could not link libvitastor_client')
++    else
++      warning('could not link libvitastor_client, disabling')
++    endif
++  endif
++endif
++
+ glusterfs = not_found
+ glusterfs_ftruncate_has_stat = false
+ glusterfs_iocb_has_stat = false
+@@ -1118,6 +1138,7 @@ config_host_data.set('CONFIG_LIBCAP_NG', libcap_ng.found())
+ config_host_data.set('CONFIG_LIBISCSI', libiscsi.found())
+ config_host_data.set('CONFIG_LIBNFS', libnfs.found())
+ config_host_data.set('CONFIG_RBD', rbd.found())
++config_host_data.set('CONFIG_VITASTOR', vitastor.found())
+ config_host_data.set('CONFIG_SDL', sdl.found())
+ config_host_data.set('CONFIG_SDL_IMAGE', sdl_image.found())
+ config_host_data.set('CONFIG_SECCOMP', seccomp.found())
+@@ -2683,6 +2704,7 @@ summary_info += {'libcap-ng support': libcap_ng.found()}
+ # TODO: add back protocol and server version
+ summary_info += {'spice support':     config_host.has_key('CONFIG_SPICE')}
+ summary_info += {'rbd support':       rbd.found()}
++summary_info += {'vitastor support':  vitastor.found()}
+ summary_info += {'xfsctl support':    config_host.has_key('CONFIG_XFS')}
+ summary_info += {'smartcard support': config_host.has_key('CONFIG_SMARTCARD')}
+ summary_info += {'U2F support':       u2f.found()}
+diff --git a/meson_options.txt b/meson_options.txt
+index 9734019995..bc93963b27 100644
+--- a/meson_options.txt
++++ b/meson_options.txt
+@@ -80,6 +80,8 @@ option('lzo', type : 'feature', value : 'auto',
+        description: 'lzo compression support')
+ option('rbd', type : 'feature', value : 'auto',
+        description: 'Ceph block device driver')
++option('vitastor', type : 'feature', value : 'auto',
++       description: 'Vitastor block device driver')
+ option('gtk', type : 'feature', value : 'auto',
+        description: 'GTK+ user interface')
+ option('sdl', type : 'feature', value : 'auto',
+diff --git a/qapi/block-core.json b/qapi/block-core.json
+index 6d227924d0..d14b29aa43 100644
+--- a/qapi/block-core.json
++++ b/qapi/block-core.json
+@@ -2819,7 +2819,7 @@
+             'preallocate', 'qcow', 'qcow2', 'qed', 'quorum', 'raw', 'rbd',
+             { 'name': 'replication', 'if': 'defined(CONFIG_REPLICATION)' },
+             'sheepdog',
+-            'ssh', 'throttle', 'vdi', 'vhdx', 'vmdk', 'vpc', 'vvfat' ] }
++            'ssh', 'throttle', 'vdi', 'vhdx', 'vitastor', 'vmdk', 'vpc', 'vvfat' ] }
+ 
+ ##
+ # @BlockdevOptionsFile:
+@@ -3671,6 +3671,28 @@
+             '*snap-id': 'uint32',
+             '*tag': 'str' } }
+ 
++##
++# @BlockdevOptionsVitastor:
++#
++# Driver specific block device options for vitastor
++#
++# @image:       Image name
++# @inode:       Inode number
++# @pool:        Pool ID
++# @size:        Desired image size in bytes
++# @config-path: Path to Vitastor configuration
++# @etcd-host:   etcd connection address(es)
++# @etcd-prefix: etcd key/value prefix
++##
++{ 'struct': 'BlockdevOptionsVitastor',
++  'data': { '*inode': 'uint64',
++            '*pool': 'uint64',
++            '*size': 'uint64',
++            '*image': 'str',
++            '*config-path': 'str',
++            '*etcd-host': 'str',
++            '*etcd-prefix': 'str' } }
++
+ ##
+ # @ReplicationMode:
+ #
+@@ -4042,6 +4064,7 @@
+       'throttle':   'BlockdevOptionsThrottle',
+       'vdi':        'BlockdevOptionsGenericFormat',
+       'vhdx':       'BlockdevOptionsGenericFormat',
++      'vitastor':   'BlockdevOptionsVitastor',
+       'vmdk':       'BlockdevOptionsGenericCOWFormat',
+       'vpc':        'BlockdevOptionsGenericFormat',
+       'vvfat':      'BlockdevOptionsVVFAT'
+@@ -4426,6 +4449,17 @@
+             'size':             'size',
+             '*cluster-size' :   'size' } }
+ 
++##
++# @BlockdevCreateOptionsVitastor:
++#
++# Driver specific image creation options for Vitastor.
++#
++# @size: Size of the virtual disk in bytes
++##
++{ 'struct': 'BlockdevCreateOptionsVitastor',
++  'data': { 'location':         'BlockdevOptionsVitastor',
++            'size':             'size' } }
++
+ ##
+ # @BlockdevVmdkSubformat:
+ #
+@@ -4691,6 +4725,7 @@
+       'ssh':            'BlockdevCreateOptionsSsh',
+       'vdi':            'BlockdevCreateOptionsVdi',
+       'vhdx':           'BlockdevCreateOptionsVhdx',
++      'vitastor':       'BlockdevCreateOptionsVitastor',
+       'vmdk':           'BlockdevCreateOptionsVmdk',
+       'vpc':            'BlockdevCreateOptionsVpc'
+   } }

patches/qemu-6.1-vitastor.patch

@@ -0,0 +1,188 @@
+Index: qemu-6.1+dfsg/qapi/block-core.json
+===================================================================
+--- qemu-6.1+dfsg.orig/qapi/block-core.json
++++ qemu-6.1+dfsg/qapi/block-core.json
+@@ -2838,7 +2838,7 @@
+             'luks', 'nbd', 'nfs', 'null-aio', 'null-co', 'nvme', 'parallels',
+             'preallocate', 'qcow', 'qcow2', 'qed', 'quorum', 'raw', 'rbd',
+             { 'name': 'replication', 'if': 'defined(CONFIG_REPLICATION)' },
+-            'ssh', 'throttle', 'vdi', 'vhdx', 'vmdk', 'vpc', 'vvfat' ] }
++            'ssh', 'throttle', 'vdi', 'vhdx', 'vitastor', 'vmdk', 'vpc', 'vvfat' ] }
+ 
+ ##
+ # @BlockdevOptionsFile:
+@@ -3763,6 +3763,28 @@
+             '*server': ['InetSocketAddressBase'] } }
+ 
+ ##
++# @BlockdevOptionsVitastor:
++#
++# Driver specific block device options for vitastor
++#
++# @image:       Image name
++# @inode:       Inode number
++# @pool:        Pool ID
++# @size:        Desired image size in bytes
++# @config-path: Path to Vitastor configuration
++# @etcd-host:   etcd connection address(es)
++# @etcd-prefix: etcd key/value prefix
++##
++{ 'struct': 'BlockdevOptionsVitastor',
++  'data': { '*inode': 'uint64',
++            '*pool': 'uint64',
++            '*size': 'uint64',
++            '*image': 'str',
++            '*config-path': 'str',
++            '*etcd-host': 'str',
++            '*etcd-prefix': 'str' } }
++
++##
+ # @ReplicationMode:
+ #
+ # An enumeration of replication modes.
+@@ -4134,6 +4156,7 @@
+       'throttle':   'BlockdevOptionsThrottle',
+       'vdi':        'BlockdevOptionsGenericFormat',
+       'vhdx':       'BlockdevOptionsGenericFormat',
++      'vitastor':   'BlockdevOptionsVitastor',
+       'vmdk':       'BlockdevOptionsGenericCOWFormat',
+       'vpc':        'BlockdevOptionsGenericFormat',
+       'vvfat':      'BlockdevOptionsVVFAT'
+@@ -4523,6 +4546,17 @@
+             '*encrypt' :        'RbdEncryptionCreateOptions' } }
+ 
+ ##
++# @BlockdevCreateOptionsVitastor:
++#
++# Driver specific image creation options for Vitastor.
++#
++# @size: Size of the virtual disk in bytes
++##
++{ 'struct': 'BlockdevCreateOptionsVitastor',
++  'data': { 'location':         'BlockdevOptionsVitastor',
++            'size':             'size' } }
++
++##
+ # @BlockdevVmdkSubformat:
+ #
+ # Subformat options for VMDK images
+@@ -4718,6 +4752,7 @@
+       'ssh':            'BlockdevCreateOptionsSsh',
+       'vdi':            'BlockdevCreateOptionsVdi',
+       'vhdx':           'BlockdevCreateOptionsVhdx',
++      'vitastor':       'BlockdevCreateOptionsVitastor',
+       'vmdk':           'BlockdevCreateOptionsVmdk',
+       'vpc':            'BlockdevCreateOptionsVpc'
+   } }
+Index: qemu-6.1+dfsg/block/meson.build
+===================================================================
+--- qemu-6.1+dfsg.orig/block/meson.build
++++ qemu-6.1+dfsg/block/meson.build
+@@ -78,6 +78,7 @@ foreach m : [
+   [libnfs, 'nfs', files('nfs.c')],
+   [libssh, 'ssh', files('ssh.c')],
+   [rbd, 'rbd', files('rbd.c')],
++  [vitastor, 'vitastor', files('vitastor.c')],
+ ]
+   if m[0].found()
+     module_ss = ss.source_set()
+Index: qemu-6.1+dfsg/configure
+===================================================================
+--- qemu-6.1+dfsg.orig/configure
++++ qemu-6.1+dfsg/configure
+@@ -375,6 +375,7 @@ trace_file="trace"
+ spice="$default_feature"
+ spice_protocol="auto"
+ rbd="auto"
++vitastor="auto"
+ smartcard="auto"
+ u2f="auto"
+ libusb="auto"
+@@ -1292,6 +1293,10 @@ for opt do
+   ;;
+   --enable-rbd) rbd="enabled"
+   ;;
++  --disable-vitastor) vitastor="disabled"
++  ;;
++  --enable-vitastor) vitastor="enabled"
++  ;;
+   --disable-xfsctl) xfs="no"
+   ;;
+   --enable-xfsctl) xfs="yes"
+@@ -1916,6 +1921,7 @@ disabled with --disable-FEATURE, default
+   spice           spice
+   spice-protocol  spice-protocol
+   rbd             rados block device (rbd)
++  vitastor        vitastor block device
+   libiscsi        iscsi support
+   libnfs          nfs support
+   smartcard       smartcard support (libcacard)
+@@ -5202,7 +5208,7 @@ if test "$skip_meson" = no; then
+         -Dcapstone=$capstone -Dslirp=$slirp -Dfdt=$fdt -Dbrlapi=$brlapi \
+         -Dcurl=$curl -Dglusterfs=$glusterfs -Dbzip2=$bzip2 -Dlibiscsi=$libiscsi \
+         -Dlibnfs=$libnfs -Diconv=$iconv -Dcurses=$curses -Dlibudev=$libudev\
+-        -Drbd=$rbd -Dlzo=$lzo -Dsnappy=$snappy -Dlzfse=$lzfse -Dlibxml2=$libxml2 \
++        -Drbd=$rbd -Dvitastor=$vitastor -Dlzo=$lzo -Dsnappy=$snappy -Dlzfse=$lzfse -Dlibxml2=$libxml2 \
+         -Dlibdaxctl=$libdaxctl -Dlibpmem=$libpmem -Dlinux_io_uring=$linux_io_uring \
+         -Dgnutls=$gnutls -Dnettle=$nettle -Dgcrypt=$gcrypt -Dauth_pam=$auth_pam \
+         -Dzstd=$zstd -Dseccomp=$seccomp -Dvirtfs=$virtfs -Dcap_ng=$cap_ng \
+Index: qemu-6.1+dfsg/meson.build
+===================================================================
+--- qemu-6.1+dfsg.orig/meson.build
++++ qemu-6.1+dfsg/meson.build
+@@ -729,6 +729,26 @@ if not get_option('rbd').auto() or have_
+   endif
+ endif
+ 
++vitastor = not_found
++if not get_option('vitastor').auto() or have_block
++  libvitastor_client = cc.find_library('vitastor_client', has_headers: ['vitastor_c.h'],
++    required: get_option('vitastor'), kwargs: static_kwargs)
++  if libvitastor_client.found()
++    if cc.links('''
++      #include <vitastor_c.h>
++      int main(void) {
++        vitastor_c_create_qemu(0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0);
++        return 0;
++      }''', dependencies: libvitastor_client)
++      vitastor = declare_dependency(dependencies: libvitastor_client)
++    elif get_option('vitastor').enabled()
++      error('could not link libvitastor_client')
++    else
++      warning('could not link libvitastor_client, disabling')
++    endif
++  endif
++endif
++
+ glusterfs = not_found
+ glusterfs_ftruncate_has_stat = false
+ glusterfs_iocb_has_stat = false
+@@ -1264,6 +1284,7 @@ config_host_data.set('CONFIG_LIBNFS', li
+ config_host_data.set('CONFIG_LINUX_IO_URING', linux_io_uring.found())
+ config_host_data.set('CONFIG_LIBPMEM', libpmem.found())
+ config_host_data.set('CONFIG_RBD', rbd.found())
++config_host_data.set('CONFIG_VITASTOR', vitastor.found())
+ config_host_data.set('CONFIG_SDL', sdl.found())
+ config_host_data.set('CONFIG_SDL_IMAGE', sdl_image.found())
+ config_host_data.set('CONFIG_SECCOMP', seccomp.found())
+@@ -3075,6 +3096,7 @@ summary_info += {'bpf support': libbpf.f
+ # TODO: add back protocol and server version
+ summary_info += {'spice support':     config_host.has_key('CONFIG_SPICE')}
+ summary_info += {'rbd support':       rbd.found()}
++summary_info += {'vitastor support':  vitastor.found()}
+ summary_info += {'xfsctl support':    config_host.has_key('CONFIG_XFS')}
+ summary_info += {'smartcard support': cacard.found()}
+ summary_info += {'U2F support':       u2f.found()}
+Index: qemu-6.1+dfsg/meson_options.txt
+===================================================================
+--- qemu-6.1+dfsg.orig/meson_options.txt
++++ qemu-6.1+dfsg/meson_options.txt
+@@ -102,6 +102,8 @@ option('lzo', type : 'feature', value :
+        description: 'lzo compression support')
+ option('rbd', type : 'feature', value : 'auto',
+        description: 'Ceph block device driver')
++option('vitastor', type : 'feature', value : 'auto',
++       description: 'Vitastor block device driver')
+ option('gtk', type : 'feature', value : 'auto',
+        description: 'GTK+ user interface')
+ option('sdl', type : 'feature', value : 'auto',

patches/qemu-make-patches.sh

@@ -0,0 +1,15 @@
+#!/bin/bash
+# QEMU patches don't include the `block/vitastor.c` file to not duplicate it in sources
+# Run this script to append its creation to all QEMU patches
+
+DIR=$(dirname $0)
+for i in "$DIR"/qemu-*-vitastor.patch "$DIR"/pve-qemu-*-vitastor.patch; do
+    if ! grep -qP '^\+\+\+ .*block/vitastor\.c' $i; then
+        echo 'Index: a/block/vitastor.c' >> $i
+        echo '===================================================================' >> $i
+        echo '--- /dev/null' >> $i
+        echo '+++ a/block/vitastor.c' >> $i
+        echo '@@ -0,0 +1,'$(wc -l "$DIR"/../src/qemu_driver.c)' @@' >> $i
+        cat "$DIR"/../src/qemu_driver.c | sed 's/^/+/' >> $i
+    fi
+done

rpm/build-tarball.sh

@@ -1,5 +1,5 @@
 #!/bin/bash
-# Vitastor depends on QEMU and FIO headers, but QEMU and FIO don't have -devel packages
+# Vitastor depends on QEMU and/or FIO headers, but QEMU and FIO don't have -devel packages
 # So we have to copy their headers into the source tarball
 
 set -e
@@ -18,34 +18,11 @@ else
 fi
 cd ~/rpmbuild/SPECS
 rpmbuild -bp fio.spec
-perl -i -pe 's/^make V=1/exit 0; make V=1/' qemu*.spec
-rpmbuild -bc qemu*.spec
-perl -i -pe 's/^exit 0; make V=1/make V=1/' qemu*.spec
-cd ~/rpmbuild/BUILD/qemu*/
-rm -rf $VITASTOR/qemu $VITASTOR/fio
-mkdir -p $VITASTOR/qemu/b/qemu
-make -j8 config-host.h
-cp config-host.h $VITASTOR/qemu/b/qemu
-cp -r include $VITASTOR/qemu
-if [ -f qapi-schema.json ]; then
-    # QEMU 2.0
-    make qapi-types.h
-    cp qapi-types.h $VITASTOR/qemu/b/qemu
-else
-    # QEMU 3.0+
-    make qapi
-    cp -r qapi $VITASTOR/qemu/b/qemu
-fi
 cd $VITASTOR
-sh copy-qemu-includes.sh
-rm -rf qemu
-mv qemu-copy qemu
 ln -s ~/rpmbuild/BUILD/fio*/ fio
 sh copy-fio-includes.sh
 rm fio
 mv fio-copy fio
 FIO=`rpm -qi fio | perl -e 'while(<>) { /^Epoch[\s:]+(\S+)/ && print "$1:"; /^Version[\s:]+(\S+)/ && print $1; /^Release[\s:]+(\S+)/ && print "-$1"; }'`
-QEMU=`rpm -qi qemu qemu-kvm | perl -e 'while(<>) { /^Epoch[\s:]+(\S+)/ && print "$1:"; /^Version[\s:]+(\S+)/ && print $1; /^Release[\s:]+(\S+)/ && print "-$1"; }'`
 perl -i -pe 's/(Requires:\s*fio)([^\n]+)?/$1 = '$FIO'/' $VITASTOR/rpm/vitastor-el$EL.spec
-perl -i -pe 's/(Requires:\s*qemu(?:-kvm)?)([^\n]+)?/$1 = '$QEMU'/' $VITASTOR/rpm/vitastor-el$EL.spec
-tar --transform 's#^#vitastor-0.6.8/#' --exclude 'rpm/*.rpm' -czf $VITASTOR/../vitastor-0.6.8$(rpm --eval '%dist').tar.gz *
+tar --transform 's#^#vitastor-0.6.12/#' --exclude 'rpm/*.rpm' -czf $VITASTOR/../vitastor-0.6.12$(rpm --eval '%dist').tar.gz *

rpm/qemu-el8.Dockerfile

@@ -1,3 +1,6 @@
+# This is an attempt to automatically build patched RPM specs
+# More or less broken, better use *.spec.patch for now (and copy src/qemu_driver.c to SOURCES/qemu-vitastor.c)
+
 # Build packages for CentOS 8 inside a container
 # cd ..; podman build -t qemu-el8 -v `pwd`/packages:/root/packages -f rpm/qemu-el8.Dockerfile .
 

rpm/qemu-kvm-4.2-el7.spec.patch

@@ -1,5 +1,5 @@
 --- qemu-kvm.spec.orig	2020-11-09 23:41:03.000000000 +0000
-+++ qemu-kvm.spec	2020-12-06 10:44:24.207640963 +0000
++++ qemu-kvm.spec	2021-12-01 21:53:30.895747529 +0000
 @@ -2,7 +2,7 @@
  %global SLOF_gittagcommit 899d9883
  
@@ -9,25 +9,24 @@
  %global have_opengl   1
  %global have_fdt      0
  %global have_gluster  1
-@@ -56,7 +56,7 @@ Requires: %{name}-block-curl = %{epoch}:
- Requires: %{name}-block-gluster = %{epoch}:%{version}-%{release} \
+@@ -57,6 +57,7 @@ Requires: %{name}-block-gluster = %{epoc
  %endif                                                           \
  Requires: %{name}-block-iscsi = %{epoch}:%{version}-%{release}   \
--Requires: %{name}-block-rbd = %{epoch}:%{version}-%{release}     \
-+#Requires: %{name}-block-rbd = %{epoch}:%{version}-%{release}     \
+ Requires: %{name}-block-rbd = %{epoch}:%{version}-%{release}     \
++Requires: %{name}-block-vitastor = %{epoch}:%{version}-%{release}\
  Requires: %{name}-block-ssh = %{epoch}:%{version}-%{release}
  
  # Macro to properly setup RHEL/RHEV conflict handling
-@@ -67,7 +67,7 @@ Obsoletes: %1-rhev
+@@ -67,7 +68,7 @@ Obsoletes: %1-rhev
  Summary: QEMU is a machine emulator and virtualizer
  Name: qemu-kvm
  Version: 4.2.0
 -Release: 29.vitastor%{?dist}.6
-+Release: 30.vitastor%{?dist}.6
++Release: 32.vitastor%{?dist}.6
  # Epoch because we pushed a qemu-1.0 package. AIUI this can't ever be dropped
  Epoch: 15
  License: GPLv2 and GPLv2+ and CC-BY
-@@ -99,8 +99,8 @@ Source30: kvm-s390x.conf
+@@ -99,9 +100,10 @@ Source30: kvm-s390x.conf
  Source31: kvm-x86.conf
  Source32: qemu-pr-helper.service
  Source33: qemu-pr-helper.socket
@@ -36,9 +35,11 @@
 +#Source34: 81-kvm-rhel.rules
 +#Source35: udev-kvm-check.c
  Source36: README.tests
++Source37: qemu-vitastor.c
  
  
-@@ -825,7 +825,9 @@ Patch331: kvm-Drop-bogus-IPv6-messages.p
+ Patch0005: 0005-Initial-redhat-build.patch
+@@ -825,7 +827,9 @@ Patch331: kvm-Drop-bogus-IPv6-messages.p
  Patch333: kvm-virtiofsd-Whitelist-fchmod.patch
  # For bz#1883869 - virtiofsd core dump in KATA Container [rhel-8.2.1.z]
  Patch334: kvm-virtiofsd-avoid-proc-self-fd-tempdir.patch
@@ -49,7 +50,7 @@
  
  BuildRequires: wget
  BuildRequires: rpm-build
-@@ -842,7 +844,8 @@ BuildRequires: pciutils-devel
+@@ -842,7 +846,8 @@ BuildRequires: pciutils-devel
  BuildRequires: libiscsi-devel
  BuildRequires: ncurses-devel
  BuildRequires: libattr-devel
@@ -59,7 +60,7 @@
  %if %{have_usbredir}
  BuildRequires: usbredir-devel >= 0.7.1
  %endif
-@@ -856,12 +859,12 @@ BuildRequires: virglrenderer-devel
+@@ -856,12 +861,13 @@ BuildRequires: virglrenderer-devel
  # For smartcard NSS support
  BuildRequires: nss-devel
  %endif
@@ -70,12 +71,13 @@
  BuildRequires: libssh-devel
 -BuildRequires: librados-devel
 -BuildRequires: librbd-devel
-+#BuildRequires: librados-devel
-+#BuildRequires: librbd-devel
++BuildRequires: librados2-devel
++BuildRequires: librbd1-devel
++BuildRequires: vitastor-client-devel
  %if %{have_gluster}
  # For gluster block driver
  BuildRequires: glusterfs-api-devel
-@@ -955,25 +958,25 @@ hardware for a full system such as a PC
+@@ -955,25 +961,25 @@ hardware for a full system such as a PC
  
  %package -n qemu-kvm-core
  Summary: qemu-kvm core components
@@ -105,38 +107,35 @@
  # For compressed guest memory dumps
  Requires: lzo snappy
  %if %{have_kvm_setup}
-@@ -1085,15 +1088,15 @@ This package provides the additional iSC
- Install this package if you want to access iSCSI volumes.
- 
- 
--%package  block-rbd
--Summary: QEMU Ceph/RBD block driver
--Requires: %{name}-common%{?_isa} = %{epoch}:%{version}-%{release}
--
--%description block-rbd
--This package provides the additional Ceph/RBD block driver for QEMU.
--
--Install this package if you want to access remote Ceph volumes
--using the rbd protocol.
-+#%package  block-rbd
-+#Summary: QEMU Ceph/RBD block driver
-+#Requires: %{name}-common%{?_isa} = %{epoch}:%{version}-%{release}
-+#
-+#%description block-rbd
-+#This package provides the additional Ceph/RBD block driver for QEMU.
-+#
-+#Install this package if you want to access remote Ceph volumes
-+#using the rbd protocol.
+@@ -1096,6 +1102,14 @@ Install this package if you want to acce
+ using the rbd protocol.
  
  
++%package  block-vitastor
++Summary: QEMU Vitastor block driver
++Requires: %{name}-common%{?_isa} = %{epoch}:%{version}-%{release}
++
++%description block-vitastor
++This package provides the additional Vitastor block driver for QEMU.
++
++
  %package  block-ssh
-@@ -1117,12 +1120,14 @@ the Secure Shell (SSH) protocol.
+ Summary: QEMU SSH block driver
+ Requires: %{name}-common%{?_isa} = %{epoch}:%{version}-%{release}
+@@ -1110,6 +1124,7 @@ the Secure Shell (SSH) protocol.
+ %prep
+ %setup -n qemu-%{version}
+ %autopatch -p1
++cp %{SOURCE37} ./block/vitastor.c
+ 
+ %build
+ %global buildarch %{kvm_target}-softmmu
+@@ -1117,12 +1132,13 @@ the Secure Shell (SSH) protocol.
  # --build-id option is used for giving info to the debug packages.
  buildldflags="VL_LDFLAGS=-Wl,--build-id"
  
 -%global block_drivers_list qcow2,raw,file,host_device,nbd,iscsi,rbd,blkdebug,luks,null-co,nvme,copy-on-read,throttle
-+#%global block_drivers_list qcow2,raw,file,host_device,nbd,iscsi,rbd,blkdebug,luks,null-co,nvme,copy-on-read,throttle
-+%global block_drivers_list qcow2,raw,file,host_device,nbd,iscsi,blkdebug,luks,null-co,nvme,copy-on-read,throttle
++%global block_drivers_list qcow2,raw,file,host_device,nbd,iscsi,rbd,vitastor,blkdebug,luks,null-co,nvme,copy-on-read,throttle
  
  %if 0%{have_gluster}
      %global block_drivers_list %{block_drivers_list},gluster
@@ -146,12 +145,20 @@
  ./configure  \
   --prefix="%{_prefix}" \
   --libdir="%{_libdir}" \
-@@ -1152,15 +1157,15 @@ buildldflags="VL_LDFLAGS=-Wl,--build-id"
- %else
+@@ -1132,7 +1148,7 @@ buildldflags="VL_LDFLAGS=-Wl,--build-id"
+  --docdir="%{qemudocdir}" \
+  --libexecdir="%{_libexecdir}" \
+  --extra-ldflags="-Wl,--build-id -Wl,-z,relro -Wl,-z,now" \
+- --extra-cflags="%{optflags}" \
++ --extra-cflags="%{optflags} -DRHEL_BDRV_CO_TRUNCATE_FLAGS" \
+  --with-pkgversion="%{name}-%{version}-%{release}" \
+  --with-confsuffix=/"%{name}" \
+  --firmwarepath=%{_prefix}/share/qemu-firmware \
+@@ -1153,14 +1169,15 @@ buildldflags="VL_LDFLAGS=-Wl,--build-id"
    --disable-numa \
  %endif
--  --enable-rbd \
-+  --disable-rbd \
+   --enable-rbd \
++  --enable-vitastor \
  %if 0%{have_librdma}
    --enable-rdma \
  %else
@@ -165,7 +172,7 @@
    --enable-spice \
    --enable-smartcard \
    --enable-virglrenderer \
-@@ -1179,7 +1184,7 @@ buildldflags="VL_LDFLAGS=-Wl,--build-id"
+@@ -1179,7 +1196,7 @@ buildldflags="VL_LDFLAGS=-Wl,--build-id"
  %else
    --disable-usb-redir \
  %endif
@@ -174,7 +181,7 @@
  %ifarch x86_64
    --enable-libpmem \
  %else
-@@ -1193,9 +1198,7 @@ buildldflags="VL_LDFLAGS=-Wl,--build-id"
+@@ -1193,9 +1210,7 @@ buildldflags="VL_LDFLAGS=-Wl,--build-id"
  %endif
    --python=%{__python3} \
    --target-list="%{buildarch}" \
@@ -184,7 +191,7 @@
    --with-coroutine=ucontext \
    --tls-priority=NORMAL \
    --disable-bluez \
-@@ -1262,7 +1265,7 @@ buildldflags="VL_LDFLAGS=-Wl,--build-id"
+@@ -1262,7 +1277,7 @@ buildldflags="VL_LDFLAGS=-Wl,--build-id"
    --disable-sanitizers \
    --disable-hvf \
    --disable-whpx \
@@ -193,7 +200,7 @@
    --disable-membarrier \
    --disable-vhost-crypto \
    --disable-libxml2 \
-@@ -1308,7 +1311,7 @@ make V=1 %{?_smp_mflags} $buildldflags
+@@ -1308,7 +1323,7 @@ make V=1 %{?_smp_mflags} $buildldflags
  cp -a %{kvm_target}-softmmu/qemu-system-%{kvm_target} qemu-kvm
  
  gcc %{SOURCE6} $RPM_OPT_FLAGS $RPM_LD_FLAGS -o ksmctl
@@ -202,7 +209,7 @@
  
  %install
  %define _udevdir %(pkg-config --variable=udevdir udev)
-@@ -1343,8 +1346,8 @@ mkdir -p $RPM_BUILD_ROOT%{testsdir}/test
+@@ -1343,8 +1358,8 @@ mkdir -p $RPM_BUILD_ROOT%{testsdir}/test
  mkdir -p $RPM_BUILD_ROOT%{testsdir}/tests/qemu-iotests
  mkdir -p $RPM_BUILD_ROOT%{testsdir}/scripts/qmp
  
@@ -213,7 +220,7 @@
  
  install -m 0644 scripts/dump-guest-memory.py \
                  $RPM_BUILD_ROOT%{_datadir}/%{name}
-@@ -1562,6 +1565,8 @@ rm -rf $RPM_BUILD_ROOT%{qemudocdir}/inte
+@@ -1562,6 +1577,8 @@ rm -rf $RPM_BUILD_ROOT%{qemudocdir}/inte
  # Remove spec
  rm -rf $RPM_BUILD_ROOT%{qemudocdir}/specs
  
@@ -222,7 +229,7 @@
  %check
  export DIFF=diff; make check V=1
  
-@@ -1645,8 +1650,8 @@ useradd -r -u 107 -g qemu -G kvm -d / -s
+@@ -1645,8 +1662,8 @@ useradd -r -u 107 -g qemu -G kvm -d / -s
  %config(noreplace) %{_sysconfdir}/sysconfig/ksm
  %{_unitdir}/ksmtuned.service
  %{_sbindir}/ksmtuned
@@ -233,7 +240,7 @@
  %ghost %{_sysconfdir}/kvm
  %config(noreplace) %{_sysconfdir}/ksmtuned.conf
  %dir %{_sysconfdir}/%{name}
-@@ -1711,8 +1716,8 @@ useradd -r -u 107 -g qemu -G kvm -d / -s
+@@ -1711,8 +1728,8 @@ useradd -r -u 107 -g qemu -G kvm -d / -s
  %{_libexecdir}/vhost-user-gpu
  %{_datadir}/%{name}/vhost-user/50-qemu-gpu.json
  %endif
@@ -244,14 +251,13 @@
  
  %files -n qemu-img
  %defattr(-,root,root)
-@@ -1748,8 +1753,8 @@ useradd -r -u 107 -g qemu -G kvm -d / -s
- %files block-iscsi
- %{_libdir}/qemu-kvm/block-iscsi.so
- 
--%files block-rbd
--%{_libdir}/qemu-kvm/block-rbd.so
-+#%files block-rbd
-+#%{_libdir}/qemu-kvm/block-rbd.so
+@@ -1751,6 +1768,9 @@ useradd -r -u 107 -g qemu -G kvm -d / -s
+ %files block-rbd
+ %{_libdir}/qemu-kvm/block-rbd.so
  
++%files block-vitastor
++%{_libdir}/qemu-kvm/block-vitastor.so
++
  %files block-ssh
  %{_libdir}/qemu-kvm/block-ssh.so
+ 

rpm/qemu-kvm-4.2-el8.spec.patch

@@ -0,0 +1,112 @@
+--- qemu-kvm.spec.orig	2021-12-01 22:10:58.967935539 +0000
++++ qemu-kvm.spec	2021-12-01 22:14:38.530117175 +0000
+@@ -57,6 +57,7 @@ Requires: %{name}-block-gluster = %{epoc
+ %endif                                                           \
+ Requires: %{name}-block-iscsi = %{epoch}:%{version}-%{release}   \
+ Requires: %{name}-block-rbd = %{epoch}:%{version}-%{release}     \
++Requires: %{name}-block-vitastor = %{epoch}:%{version}-%{release}\
+ Requires: %{name}-block-ssh = %{epoch}:%{version}-%{release}
+ 
+ # Macro to properly setup RHEL/RHEV conflict handling
+@@ -67,7 +68,7 @@ Obsoletes: %1-rhev
+ Summary: QEMU is a machine emulator and virtualizer
+ Name: qemu-kvm
+ Version: 4.2.0
+-Release: 29%{?dist}.6
++Release: 32.vitastor%{?dist}.6
+ # Epoch because we pushed a qemu-1.0 package. AIUI this can't ever be dropped
+ Epoch: 15
+ License: GPLv2 and GPLv2+ and CC-BY
+@@ -102,6 +103,7 @@ Source33: qemu-pr-helper.socket
+ Source34: 81-kvm-rhel.rules
+ Source35: udev-kvm-check.c
+ Source36: README.tests
++Source37: qemu-vitastor.c
+ 
+ 
+ Patch0005: 0005-Initial-redhat-build.patch
+@@ -825,6 +827,7 @@ Patch331: kvm-Drop-bogus-IPv6-messages.p
+ Patch333: kvm-virtiofsd-Whitelist-fchmod.patch
+ # For bz#1883869 - virtiofsd core dump in KATA Container [rhel-8.2.1.z]
+ Patch334: kvm-virtiofsd-avoid-proc-self-fd-tempdir.patch
++Patch335: qemu-4.2-vitastor.patch
+ 
+ BuildRequires: wget
+ BuildRequires: rpm-build
+@@ -861,6 +864,7 @@ BuildRequires: libcurl-devel
+ BuildRequires: libssh-devel
+ BuildRequires: librados-devel
+ BuildRequires: librbd-devel
++BuildRequires: vitastor-client-devel
+ %if %{have_gluster}
+ # For gluster block driver
+ BuildRequires: glusterfs-api-devel
+@@ -1095,6 +1099,14 @@ Install this package if you want to acce
+ using the rbd protocol.
+ 
+ 
++%package  block-vitastor
++Summary: QEMU Vitastor block driver
++Requires: %{name}-common%{?_isa} = %{epoch}:%{version}-%{release}
++
++%description block-vitastor
++This package provides the additional Vitastor block driver for QEMU.
++
++
+ %package  block-ssh
+ Summary: QEMU SSH block driver
+ Requires: %{name}-common%{?_isa} = %{epoch}:%{version}-%{release}
+@@ -1109,6 +1121,7 @@ the Secure Shell (SSH) protocol.
+ %prep
+ %setup -n qemu-%{version}
+ %autopatch -p1
++cp %{SOURCE37} ./block/vitastor.c
+ 
+ %build
+ %global buildarch %{kvm_target}-softmmu
+@@ -1116,7 +1129,7 @@ the Secure Shell (SSH) protocol.
+ # --build-id option is used for giving info to the debug packages.
+ buildldflags="VL_LDFLAGS=-Wl,--build-id"
+ 
+-%global block_drivers_list qcow2,raw,file,host_device,nbd,iscsi,rbd,blkdebug,luks,null-co,nvme,copy-on-read,throttle
++%global block_drivers_list qcow2,raw,file,host_device,nbd,iscsi,rbd,vitastor,blkdebug,luks,null-co,nvme,copy-on-read,throttle
+ 
+ %if 0%{have_gluster}
+     %global block_drivers_list %{block_drivers_list},gluster
+@@ -1131,7 +1144,7 @@ buildldflags="VL_LDFLAGS=-Wl,--build-id"
+  --docdir="%{qemudocdir}" \
+  --libexecdir="%{_libexecdir}" \
+  --extra-ldflags="-Wl,--build-id -Wl,-z,relro -Wl,-z,now" \
+- --extra-cflags="%{optflags}" \
++ --extra-cflags="%{optflags} -DRHEL_BDRV_CO_TRUNCATE_FLAGS" \
+  --with-pkgversion="%{name}-%{version}-%{release}" \
+  --with-confsuffix=/"%{name}" \
+  --firmwarepath=%{_prefix}/share/qemu-firmware \
+@@ -1152,6 +1165,7 @@ buildldflags="VL_LDFLAGS=-Wl,--build-id"
+   --disable-numa \
+ %endif
+   --enable-rbd \
++  --enable-vitastor \
+ %if 0%{have_librdma}
+   --enable-rdma \
+ %else
+@@ -1192,9 +1206,7 @@ buildldflags="VL_LDFLAGS=-Wl,--build-id"
+ %endif
+   --python=%{__python3} \
+   --target-list="%{buildarch}" \
+-  --block-drv-rw-whitelist=%{block_drivers_list} \
+   --audio-drv-list= \
+-  --block-drv-ro-whitelist=vmdk,vhdx,vpc,https,ssh \
+   --with-coroutine=ucontext \
+   --tls-priority=NORMAL \
+   --disable-bluez \
+@@ -1750,6 +1762,9 @@ useradd -r -u 107 -g qemu -G kvm -d / -s
+ %files block-rbd
+ %{_libdir}/qemu-kvm/block-rbd.so
+ 
++%files block-vitastor
++%{_libdir}/qemu-kvm/block-vitastor.so
++
+ %files block-ssh
+ %{_libdir}/qemu-kvm/block-ssh.so
+ 

rpm/qemu-kvm-6.0-el8.spec.patch

@@ -0,0 +1,103 @@
+--- qemu-kvm_6.0.spec.orig	2021-10-22 13:22:07.000000000 +0000
++++ qemu-kvm_6.0.spec	2021-12-01 22:43:26.095508618 +0000
+@@ -67,6 +67,7 @@ Requires: %{name}-hw-usbredir = %{epoch}
+ %endif                                                           \
+ Requires: %{name}-block-iscsi = %{epoch}:%{version}-%{release}   \
+ Requires: %{name}-block-rbd = %{epoch}:%{version}-%{release}     \
++Requires: %{name}-block-vitastor = %{epoch}:%{version}-%{release}\
+ Requires: %{name}-block-ssh = %{epoch}:%{version}-%{release}
+ 
+ # Macro to properly setup RHEL/RHEV conflict handling
+@@ -77,7 +78,7 @@ Obsoletes: %1-rhev <= %{epoch}:%{version
+ Summary: QEMU is a machine emulator and virtualizer
+ Name: qemu-kvm
+ Version: 6.0.0
+-Release: 33%{?dist}
++Release: 33.vitastor%{?dist}
+ # Epoch because we pushed a qemu-1.0 package. AIUI this can't ever be dropped
+ Epoch: 15
+ License: GPLv2 and GPLv2+ and CC-BY
+@@ -112,6 +113,7 @@ Source33: qemu-pr-helper.socket
+ Source34: 81-kvm-rhel.rules
+ Source35: udev-kvm-check.c
+ Source36: README.tests
++Source37: qemu-vitastor.c
+ 
+ 
+ Patch0001: 0001-redhat-Adding-slirp-to-the-exploded-tree.patch
+@@ -342,6 +344,7 @@ Patch109: kvm-virtio-balloon-Fix-page-po
+ Patch110: kvm-virtio-net-fix-use-after-unmap-free-for-sg.patch
+ # For bz#1999141 - migration fails with: "qemu-kvm: get_pci_config_device: Bad config data: i=0x9a read: 3 device: 2 cmask: ff wmask: 0 w1cmask:0"
+ Patch111: kvm-Fix-virtio-net-pci-vectors-compat.patch
++Patch112: qemu-6.0-vitastor.patch
+ 
+ BuildRequires: wget
+ BuildRequires: rpm-build
+@@ -379,6 +382,7 @@ BuildRequires: libcurl-devel
+ BuildRequires: libssh-devel
+ BuildRequires: librados-devel
+ BuildRequires: librbd-devel
++BuildRequires: vitastor-client-devel
+ %if %{have_gluster}
+ # For gluster block driver
+ BuildRequires: glusterfs-api-devel
+@@ -625,6 +629,14 @@ Install this package if you want to acce
+ using the rbd protocol.
+ 
+ 
++%package  block-vitastor
++Summary: QEMU Vitastor block driver
++Requires: %{name}-common%{?_isa} = %{epoch}:%{version}-%{release}
++
++%description block-vitastor
++This package provides the additional Vitastor block driver for QEMU.
++
++
+ %package  block-ssh
+ Summary: QEMU SSH block driver
+ Requires: %{name}-common%{?_isa} = %{epoch}:%{version}-%{release}
+@@ -678,6 +690,7 @@ This package provides usbredir support.
+ rm -fr slirp
+ mkdir slirp
+ %autopatch -p1
++cp %{SOURCE37} ./block/vitastor.c
+ 
+ %global qemu_kvm_build qemu_kvm_build
+ %global qemu_kiwi_build qemu_kiwi_src/build
+@@ -701,7 +714,7 @@ mkdir -p %{qemu_kvm_build}
+ # --build-id option is used for giving info to the debug packages.
+ buildldflags="VL_LDFLAGS=-Wl,--build-id"
+ 
+-%global block_drivers_list qcow2,raw,file,host_device,nbd,iscsi,rbd,blkdebug,luks,null-co,nvme,copy-on-read,throttle
++%global block_drivers_list qcow2,raw,file,host_device,nbd,iscsi,rbd,vitastor,blkdebug,luks,null-co,nvme,copy-on-read,throttle
+ 
+ %if 0%{have_gluster}
+     %global block_drivers_list %{block_drivers_list},gluster
+@@ -894,6 +907,7 @@ pushd %{qemu_kvm_build}
+ %endif
+   --enable-pie \
+   --enable-rbd \
++  --enable-vitastor \
+ %if 0%{have_librdma}
+   --enable-rdma \
+ %endif
+@@ -977,9 +991,7 @@ find ../default-configs -name "*-rh-devi
+   --firmwarepath=%{_prefix}/share/qemu-firmware \
+   --meson="%{__meson}" \
+   --target-list="%{buildarch}" \
+-  --block-drv-rw-whitelist=%{block_drivers_list} \
+   --audio-drv-list= \
+-  --block-drv-ro-whitelist=vmdk,vhdx,vpc,https,ssh \
+   --with-coroutine=ucontext \
+   --with-git=git \
+   --tls-priority=@QEMU,SYSTEM \
+@@ -1584,6 +1596,9 @@ sh %{_sysconfdir}/sysconfig/modules/kvm.
+ %files block-rbd
+ %{_libdir}/qemu-kvm/block-rbd.so
+ 
++%files block-vitastor
++%{_libdir}/qemu-kvm/block-vitastor.so
++
+ %files block-ssh
+ %{_libdir}/qemu-kvm/block-ssh.so
+ 

rpm/qemu-kvm.spec.patch

@@ -1,29 +0,0 @@
---- qemu-kvm.spec	2020-12-05 13:13:54.388623517 +0000
-+++ qemu-kvm.spec	2020-12-05 13:13:58.728696598 +0000
-@@ -67,7 +67,7 @@ Obsoletes: %1-rhev
- Summary: QEMU is a machine emulator and virtualizer
- Name: qemu-kvm
- Version: 4.2.0
--Release: 29%{?dist}.6
-+Release: 29.vitastor%{?dist}.6
- # Epoch because we pushed a qemu-1.0 package. AIUI this can't ever be dropped
- Epoch: 15
- License: GPLv2 and GPLv2+ and CC-BY
-@@ -825,6 +825,7 @@ Patch331: kvm-Drop-bogus-IPv6-messages.p
- Patch333: kvm-virtiofsd-Whitelist-fchmod.patch
- # For bz#1883869 - virtiofsd core dump in KATA Container [rhel-8.2.1.z]
- Patch334: kvm-virtiofsd-avoid-proc-self-fd-tempdir.patch
-+Patch335: qemu-4.2-vitastor.patch
- 
- BuildRequires: wget
- BuildRequires: rpm-build
-@@ -1192,9 +1193,7 @@ buildldflags="VL_LDFLAGS=-Wl,--build-id"
- %endif
-   --python=%{__python3} \
-   --target-list="%{buildarch}" \
--  --block-drv-rw-whitelist=%{block_drivers_list} \
-   --audio-drv-list= \
--  --block-drv-ro-whitelist=vmdk,vhdx,vpc,https,ssh \
-   --with-coroutine=ucontext \
-   --tls-priority=NORMAL \
-   --disable-bluez \

rpm/vitastor-el7.Dockerfile

@@ -9,15 +9,11 @@ WORKDIR /root
 RUN rm -f /etc/yum.repos.d/CentOS-Media.repo
 RUN yum -y --enablerepo=extras install centos-release-scl epel-release yum-utils rpm-build
 RUN yum -y install https://vitastor.io/rpms/centos/7/vitastor-release-1.0-1.el7.noarch.rpm
-RUN yum -y install devtoolset-9-gcc-c++ devtoolset-9-libatomic-devel gperftools-devel qemu-kvm fio rh-nodejs12 jerasure-devel gf-complete-devel
-RUN yumdownloader --disablerepo=centos-sclo-rh --source qemu-kvm
+RUN yum -y install devtoolset-9-gcc-c++ devtoolset-9-libatomic-devel gcc make cmake gperftools-devel fio rh-nodejs12 jerasure-devel gf-complete-devel rdma-core-devel
 RUN yumdownloader --disablerepo=centos-sclo-rh --source fio
-RUN rpm --nomd5 -i qemu*.src.rpm
 RUN rpm --nomd5 -i fio*.src.rpm
 RUN rm -f /etc/yum.repos.d/CentOS-Media.repo
-RUN cd ~/rpmbuild/SPECS && yum-builddep -y qemu-kvm.spec
 RUN cd ~/rpmbuild/SPECS && yum-builddep -y fio.spec
-RUN yum -y install rdma-core-devel
 
 ADD https://vitastor.io/rpms/liburing-el7/liburing-0.7-2.el7.src.rpm /root
 
@@ -38,7 +34,7 @@ ADD . /root/vitastor
 RUN set -e; \
     cd /root/vitastor/rpm; \
     sh build-tarball.sh; \
-    cp /root/vitastor-0.6.8.el7.tar.gz ~/rpmbuild/SOURCES; \
+    cp /root/vitastor-0.6.12.el7.tar.gz ~/rpmbuild/SOURCES; \
     cp vitastor-el7.spec ~/rpmbuild/SPECS/vitastor.spec; \
     cd ~/rpmbuild/SPECS/; \
     rpmbuild -ba vitastor.spec; \

rpm/vitastor-el7.spec

@@ -1,11 +1,11 @@
 Name:           vitastor
-Version:        0.6.8
+Version:        0.6.12
 Release:        1%{?dist}
 Summary:        Vitastor, a fast software-defined clustered block storage
 
 License:        Vitastor Network Public License 1.1
 URL:            https://vitastor.io/
-Source0:        vitastor-0.6.8.el7.tar.gz
+Source0:        vitastor-0.6.12.el7.tar.gz
 
 BuildRequires:  liburing-devel >= 0.6
 BuildRequires:  gperftools-devel
@@ -21,7 +21,6 @@ Requires:       vitastor-mon = %{version}-%{release}
 Requires:       vitastor-client = %{version}-%{release}
 Requires:       vitastor-client-devel = %{version}-%{release}
 Requires:       vitastor-fio = %{version}-%{release}
-Requires:       vitastor-qemu = %{version}-%{release}
 
 %description
 Vitastor is a small, simple and fast clustered block storage (storage for VM drives),
@@ -83,24 +82,13 @@ Requires:       fio = 3.7-1.el7
 Vitastor fio drivers for benchmarking.
 
 
-%package -n vitastor-qemu
-Summary:        Vitastor - QEMU driver
-Group:          Development/Libraries
-Requires:       vitastor-client = %{version}-%{release}
-Requires:       qemu-kvm = 2.0.0-1.el7.6
-
-
-%description -n vitastor-qemu
-Vitastor QEMU block device driver.
-
-
 %prep
 %setup -q
 
 
 %build
 . /opt/rh/devtoolset-9/enable
-%cmake . -DQEMU_PLUGINDIR=qemu-kvm
+%cmake .
 %make_build
 
 
@@ -123,7 +111,6 @@ cp -r mon %buildroot/usr/lib/vitastor
 %files -n vitastor-osd
 %_bindir/vitastor-osd
 %_bindir/vitastor-dump-journal
-/usr/lib/vitastor/make-osd.sh
 
 
 %files -n vitastor-mon
@@ -137,6 +124,7 @@ cp -r mon %buildroot/usr/lib/vitastor
 %_bindir/vita
 %_libdir/libvitastor_blk.so*
 %_libdir/libvitastor_client.so*
+/usr/lib/vitastor/make-osd.sh
 
 
 %files -n vitastor-client-devel
@@ -150,8 +138,4 @@ cp -r mon %buildroot/usr/lib/vitastor
 %_libdir/libfio_vitastor_sec.so
 
 
-%files -n vitastor-qemu
-%_libdir/qemu-kvm/block-vitastor.so
-
-
 %changelog

rpm/vitastor-el8.Dockerfile

@@ -8,14 +8,11 @@ WORKDIR /root
 RUN rm -f /etc/yum.repos.d/CentOS-Media.repo
 RUN dnf -y install centos-release-advanced-virtualization epel-release dnf-plugins-core
 RUN yum -y install https://vitastor.io/rpms/centos/8/vitastor-release-1.0-1.el8.noarch.rpm
-RUN dnf --enablerepo='centos-advanced-virtualization' -y install gcc-toolset-9 gcc-toolset-9-gcc-c++ gperftools-devel qemu-kvm fio nodejs rpm-build jerasure-devel gf-complete-devel
-RUN rm -rf /var/lib/dnf/*; dnf download --disablerepo='*' --enablerepo='vitastor' --source qemu-kvm
+RUN dnf -y install gcc-toolset-9 gcc-toolset-9-gcc-c++ gperftools-devel \
+    fio nodejs rpm-build jerasure-devel gf-complete-devel libibverbs-devel libarchive cmake
 RUN dnf download --source fio
-RUN rpm --nomd5 -i qemu*.src.rpm
 RUN rpm --nomd5 -i fio*.src.rpm
-RUN cd ~/rpmbuild/SPECS && dnf builddep -y --enablerepo=powertools --spec qemu-kvm.spec
-RUN cd ~/rpmbuild/SPECS && dnf builddep -y --enablerepo=powertools --spec fio.spec && dnf install -y cmake
-RUN yum -y install libibverbs-devel libarchive
+RUN cd ~/rpmbuild/SPECS && dnf builddep -y --enablerepo=powertools --spec fio.spec
 
 ADD https://vitastor.io/rpms/liburing-el7/liburing-0.7-2.el7.src.rpm /root
 
@@ -29,14 +26,14 @@ RUN set -e; \
     cp ~/rpmbuild/RPMS/*/liburing* /root/packages/liburing-el8/; \
     cp ~/rpmbuild/SRPMS/liburing* /root/packages/liburing-el8/
 
-RUN rpm -i `ls /root/packages/liburing-el7/liburing-*.x86_64.rpm | grep -v debug`
+RUN rpm -i `ls /root/packages/liburing-el8/liburing-*.x86_64.rpm | grep -v debug`
 
 ADD . /root/vitastor
 
 RUN set -e; \
     cd /root/vitastor/rpm; \
     sh build-tarball.sh; \
-    cp /root/vitastor-0.6.8.el8.tar.gz ~/rpmbuild/SOURCES; \
+    cp /root/vitastor-0.6.12.el8.tar.gz ~/rpmbuild/SOURCES; \
     cp vitastor-el8.spec ~/rpmbuild/SPECS/vitastor.spec; \
     cd ~/rpmbuild/SPECS/; \
     rpmbuild -ba vitastor.spec; \

rpm/vitastor-el8.spec

@@ -1,11 +1,11 @@
 Name:           vitastor
-Version:        0.6.8
+Version:        0.6.12
 Release:        1%{?dist}
 Summary:        Vitastor, a fast software-defined clustered block storage
 
 License:        Vitastor Network Public License 1.1
 URL:            https://vitastor.io/
-Source0:        vitastor-0.6.8.el8.tar.gz
+Source0:        vitastor-0.6.12.el8.tar.gz
 
 BuildRequires:  liburing-devel >= 0.6
 BuildRequires:  gperftools-devel
@@ -20,7 +20,6 @@ Requires:       vitastor-mon = %{version}-%{release}
 Requires:       vitastor-client = %{version}-%{release}
 Requires:       vitastor-client-devel = %{version}-%{release}
 Requires:       vitastor-fio = %{version}-%{release}
-Requires:       vitastor-qemu = %{version}-%{release}
 
 %description
 Vitastor is a small, simple and fast clustered block storage (storage for VM drives),
@@ -81,24 +80,13 @@ Requires:       fio = 3.7-3.el8
 Vitastor fio drivers for benchmarking.
 
 
-%package -n vitastor-qemu
-Summary:        Vitastor - QEMU driver
-Group:          Development/Libraries
-Requires:       vitastor-client = %{version}-%{release}
-Requires:       qemu-kvm = 4.2.0-29.el8.6
-
-
-%description -n vitastor-qemu
-Vitastor QEMU block device driver.
-
-
 %prep
 %setup -q
 
 
 %build
 . /opt/rh/gcc-toolset-9/enable
-%cmake . -DQEMU_PLUGINDIR=qemu-kvm
+%cmake .
 %make_build
 
 
@@ -120,7 +108,6 @@ cp -r mon %buildroot/usr/lib/vitastor
 %files -n vitastor-osd
 %_bindir/vitastor-osd
 %_bindir/vitastor-dump-journal
-/usr/lib/vitastor/make-osd.sh
 
 
 %files -n vitastor-mon
@@ -134,6 +121,7 @@ cp -r mon %buildroot/usr/lib/vitastor
 %_bindir/vita
 %_libdir/libvitastor_blk.so*
 %_libdir/libvitastor_client.so*
+/usr/lib/vitastor/make-osd.sh
 
 
 %files -n vitastor-client-devel
@@ -147,8 +135,4 @@ cp -r mon %buildroot/usr/lib/vitastor
 %_libdir/libfio_vitastor_sec.so
 
 
-%files -n vitastor-qemu
-%_libdir/qemu-kvm/block-vitastor.so
-
-
 %changelog

src/CMakeLists.txt

@@ -4,7 +4,7 @@ project(vitastor)
 
 include(GNUInstallDirs)
 
-set(WITH_QEMU true CACHE BOOL "Build QEMU driver")
+set(WITH_QEMU false CACHE BOOL "Build QEMU driver inside Vitastor source tree")
 set(WITH_FIO true CACHE BOOL "Build FIO driver")
 set(QEMU_PLUGINDIR qemu CACHE STRING "QEMU plugin directory suffix (qemu-kvm on RHEL)")
 set(WITH_ASAN false CACHE BOOL "Build with AddressSanitizer")
@@ -15,7 +15,7 @@ if("${CMAKE_INSTALL_PREFIX}" MATCHES "^/usr/local/?$")
 	set(CMAKE_INSTALL_RPATH "${CMAKE_INSTALL_PREFIX}/${CMAKE_INSTALL_LIBDIR}")
 endif()
 
-add_definitions(-DVERSION="0.6.8")
+add_definitions(-DVERSION="0.6.12")
 add_definitions(-Wall -Wno-sign-compare -Wno-comment -Wno-parentheses -Wno-pointer-arith -fdiagnostics-color=always -I ${CMAKE_SOURCE_DIR}/src)
 if (${WITH_ASAN})
 	add_definitions(-fsanitize=address -fno-omit-frame-pointer)
@@ -88,8 +88,8 @@ if (IBVERBS_LIBRARIES)
 	set(MSGR_RDMA "msgr_rdma.cpp")
 endif (IBVERBS_LIBRARIES)
 add_library(vitastor_common STATIC
-	epoll_manager.cpp etcd_state_client.cpp
-	messenger.cpp msgr_stop.cpp msgr_op.cpp msgr_send.cpp msgr_receive.cpp ringloop.cpp ../json11/json11.cpp
+	epoll_manager.cpp etcd_state_client.cpp messenger.cpp addr_util.cpp
+	msgr_stop.cpp msgr_op.cpp msgr_send.cpp msgr_receive.cpp ringloop.cpp ../json11/json11.cpp
 	http_client.cpp osd_ops.cpp pg_states.cpp timerfd_manager.cpp base64.cpp ${MSGR_RDMA}
 )
 target_compile_options(vitastor_common PUBLIC -fPIC)
@@ -112,6 +112,7 @@ if (${WITH_FIO})
 	add_library(fio_vitastor_sec SHARED
 		fio_sec_osd.cpp
 		rw_blocking.cpp
+		addr_util.cpp
 	)
 	target_link_libraries(fio_vitastor_sec
 		tcmalloc_minimal
@@ -153,7 +154,8 @@ target_link_libraries(vitastor-nbd
 
 # vitastor-cli
 add_executable(vitastor-cli
-	cli.cpp cli_ls.cpp cli_create.cpp cli_modify.cpp cli_flatten.cpp cli_merge.cpp cli_rm.cpp cli_snap_rm.cpp
+	cli.cpp cli_alloc_osd.cpp cli_simple_offsets.cpp cli_df.cpp
+	cli_ls.cpp cli_create.cpp cli_modify.cpp cli_flatten.cpp cli_merge.cpp cli_rm.cpp cli_snap_rm.cpp
 )
 target_link_libraries(vitastor-cli
 	vitastor_client
@@ -170,6 +172,7 @@ if (${WITH_QEMU})
 	add_library(qemu_vitastor SHARED
 		qemu_driver.c
 	)
+	target_compile_options(qemu_vitastor PUBLIC -DVITASTOR_SOURCE_TREE)
 	target_include_directories(qemu_vitastor PUBLIC
 		../qemu/b/qemu
 		../qemu/include
@@ -187,11 +190,11 @@ endif (${WITH_QEMU})
 ### Test stubs
 
 # stub_osd, stub_bench, osd_test
-add_executable(stub_osd stub_osd.cpp rw_blocking.cpp)
+add_executable(stub_osd stub_osd.cpp rw_blocking.cpp addr_util.cpp)
 target_link_libraries(stub_osd tcmalloc_minimal)
-add_executable(stub_bench stub_bench.cpp rw_blocking.cpp)
+add_executable(stub_bench stub_bench.cpp rw_blocking.cpp addr_util.cpp)
 target_link_libraries(stub_bench tcmalloc_minimal)
-add_executable(osd_test osd_test.cpp rw_blocking.cpp)
+add_executable(osd_test osd_test.cpp rw_blocking.cpp addr_util.cpp)
 target_link_libraries(osd_test tcmalloc_minimal)
 
 # osd_rmw_test

src/addr_util.cpp

@@ -0,0 +1,188 @@
+#include <arpa/inet.h>
+#include <net/if.h>
+#include <sys/types.h>
+#include <ifaddrs.h>
+#include <string.h>
+#include <stdio.h>
+
+#include <stdexcept>
+
+#include "addr_util.h"
+
+bool string_to_addr(std::string str, bool parse_port, int default_port, struct sockaddr *addr)
+{
+    if (parse_port)
+    {
+        int p = str.rfind(':');
+        if (p != std::string::npos && !(str.length() > 0 && str[p-1] == ']')) // "[ipv6]" which contains ':'
+        {
+            char null_byte = 0;
+            int n = sscanf(str.c_str()+p+1, "%d%c", &default_port, &null_byte);
+            if (n != 1 || default_port >= 0x10000)
+                return false;
+            str = str.substr(0, p);
+        }
+    }
+    if (inet_pton(AF_INET, str.c_str(), &((struct sockaddr_in*)addr)->sin_addr) == 1)
+    {
+        addr->sa_family = AF_INET;
+        ((struct sockaddr_in*)addr)->sin_port = htons(default_port);
+        return true;
+    }
+    if (str.length() >= 2 && str[0] == '[' && str[str.length()-1] == ']')
+        str = str.substr(1, str.length()-2);
+    if (inet_pton(AF_INET6, str.c_str(), &((struct sockaddr_in6*)addr)->sin6_addr) == 1)
+    {
+        addr->sa_family = AF_INET6;
+        ((struct sockaddr_in6*)addr)->sin6_port = htons(default_port);
+        return true;
+    }
+    return false;
+}
+
+std::string addr_to_string(const sockaddr &addr)
+{
+    char peer_str[256];
+    bool ok = false;
+    int port;
+    if (addr.sa_family == AF_INET)
+    {
+        ok = !!inet_ntop(AF_INET, &((sockaddr_in*)&addr)->sin_addr, peer_str, 256);
+        port = ntohs(((sockaddr_in*)&addr)->sin_port);
+    }
+    else if (addr.sa_family == AF_INET6)
+    {
+        ok = !!inet_ntop(AF_INET6, &((sockaddr_in6*)&addr)->sin6_addr, peer_str, 256);
+        port = ntohs(((sockaddr_in6*)&addr)->sin6_port);
+    }
+    else
+        throw std::runtime_error("Unknown address family "+std::to_string(addr.sa_family));
+    if (!ok)
+        throw std::runtime_error(std::string("inet_ntop: ") + strerror(errno));
+    return std::string(peer_str)+":"+std::to_string(port);
+}
+
+static bool cidr_match(const in_addr &addr, const in_addr &net, uint8_t bits)
+{
+    if (bits == 0)
+    {
+        // C99 6.5.7 (3): u32 << 32 is undefined behaviour
+        return true;
+    }
+    return !((addr.s_addr ^ net.s_addr) & htonl(0xFFFFFFFFu << (32 - bits)));
+}
+
+static bool cidr6_match(const in6_addr &address, const in6_addr &network, uint8_t bits)
+{
+    const uint32_t *a = address.s6_addr32;
+    const uint32_t *n = network.s6_addr32;
+    int bits_whole, bits_incomplete;
+    bits_whole = bits >> 5;         // number of whole u32
+    bits_incomplete = bits & 0x1F;  // number of bits in incomplete u32
+    if (bits_whole && memcmp(a, n, bits_whole << 2))
+        return false;
+    if (bits_incomplete)
+    {
+        uint32_t mask = htonl((0xFFFFFFFFu) << (32 - bits_incomplete));
+        if ((a[bits_whole] ^ n[bits_whole]) & mask)
+            return false;
+    }
+    return true;
+}
+
+struct addr_mask_t
+{
+    sa_family_t family;
+    in_addr ipv4;
+    in6_addr ipv6;
+    uint8_t bits;
+};
+
+std::vector<std::string> getifaddr_list(std::vector<std::string> mask_cfg, bool include_v6)
+{
+    std::vector<addr_mask_t> masks;
+    for (auto mask: mask_cfg)
+    {
+        unsigned bits = 0;
+        int p = mask.find('/');
+        if (p != std::string::npos)
+        {
+            char null_byte = 0;
+            if (sscanf(mask.c_str()+p+1, "%u%c", &bits, &null_byte) != 1 || bits > 128)
+            {
+                throw std::runtime_error((include_v6 ? "Invalid IPv4 address mask: " : "Invalid IP address mask: ") + mask);
+            }
+            mask = mask.substr(0, p);
+        }
+        in_addr ipv4;
+        in6_addr ipv6;
+        if (inet_pton(AF_INET, mask.c_str(), &ipv4) == 1)
+        {
+            if (bits > 32)
+            {
+                throw std::runtime_error((include_v6 ? "Invalid IPv4 address mask: " : "Invalid IP address mask: ") + mask);
+            }
+            masks.push_back((addr_mask_t){ .family = AF_INET, .ipv4 = ipv4, .bits = (uint8_t)bits });
+        }
+        else if (include_v6 && inet_pton(AF_INET6, mask.c_str(), &ipv6) == 1)
+        {
+            masks.push_back((addr_mask_t){ .family = AF_INET6, .ipv6 = ipv6, .bits = (uint8_t)bits });
+        }
+        else
+        {
+            throw std::runtime_error((include_v6 ? "Invalid IPv4 address mask: " : "Invalid IP address mask: ") + mask);
+        }
+    }
+    std::vector<std::string> addresses;
+    ifaddrs *list, *ifa;
+    if (getifaddrs(&list) == -1)
+    {
+        throw std::runtime_error(std::string("getifaddrs: ") + strerror(errno));
+    }
+    for (ifa = list; ifa != NULL; ifa = ifa->ifa_next)
+    {
+        if (!ifa->ifa_addr)
+        {
+            continue;
+        }
+        int family = ifa->ifa_addr->sa_family;
+        if ((family == AF_INET || family == AF_INET6 && include_v6) &&
+            (ifa->ifa_flags & (IFF_UP | IFF_RUNNING | IFF_LOOPBACK)) == (IFF_UP | IFF_RUNNING))
+        {
+            void *addr_ptr;
+            if (family == AF_INET)
+            {
+                addr_ptr = &((sockaddr_in *)ifa->ifa_addr)->sin_addr;
+            }
+            else
+            {
+                addr_ptr = &((sockaddr_in6 *)ifa->ifa_addr)->sin6_addr;
+            }
+            if (masks.size() > 0)
+            {
+                int i;
+                for (i = 0; i < masks.size(); i++)
+                {
+                    if (masks[i].family == family && (family == AF_INET
+                        ? cidr_match(*(in_addr*)addr_ptr, masks[i].ipv4, masks[i].bits)
+                        : cidr6_match(*(in6_addr*)addr_ptr, masks[i].ipv6, masks[i].bits)))
+                    {
+                        break;
+                    }
+                }
+                if (i >= masks.size())
+                {
+                    continue;
+                }
+            }
+            char addr[INET6_ADDRSTRLEN];
+            if (!inet_ntop(family, addr_ptr, addr, INET6_ADDRSTRLEN))
+            {
+                throw std::runtime_error(std::string("inet_ntop: ") + strerror(errno));
+            }
+            addresses.push_back(std::string(addr));
+        }
+    }
+    freeifaddrs(list);
+    return addresses;
+}

src/addr_util.h

@@ -0,0 +1,9 @@
+#pragma once
+
+#include <sys/socket.h>
+#include <string>
+#include <vector>
+
+bool string_to_addr(std::string str, bool parse_port, int default_port, struct sockaddr *addr);
+std::string addr_to_string(const sockaddr &addr);
+std::vector<std::string> getifaddr_list(std::vector<std::string> mask_cfg = std::vector<std::string>(), bool include_v6 = false);

src/blockstore_flush.cpp

@@ -185,7 +185,7 @@ void journal_flusher_t::release_trim()
 void journal_flusher_t::dump_diagnostics()
 {
     const char *unflushable_type = "";
-    obj_ver_id unflushable = { 0 };
+    obj_ver_id unflushable = {};
     // Try to find out if there is a flushable object for information
     for (object_id cur_oid: flush_queue)
     {
@@ -486,8 +486,8 @@ resume_1:
         if (bs->clean_entry_bitmap_size)
         {
             new_clean_bitmap = (bs->inmemory_meta
-                ? meta_new.buf + meta_new.pos*bs->clean_entry_size + sizeof(clean_disk_entry)
-                : bs->clean_bitmap + (clean_loc >> bs->block_order)*(2*bs->clean_entry_bitmap_size));
+                ? (uint8_t*)meta_new.buf + meta_new.pos*bs->clean_entry_size + sizeof(clean_disk_entry)
+                : (uint8_t*)bs->clean_bitmap + (clean_loc >> bs->block_order)*(2*bs->clean_entry_bitmap_size));
             if (clean_init_bitmap)
             {
                 memset(new_clean_bitmap, 0, bs->clean_entry_bitmap_size);
@@ -533,7 +533,7 @@ resume_1:
                 return false;
             }
             // zero out old metadata entry
-            memset(meta_old.buf + meta_old.pos*bs->clean_entry_size, 0, bs->clean_entry_size);
+            memset((uint8_t*)meta_old.buf + meta_old.pos*bs->clean_entry_size, 0, bs->clean_entry_size);
             await_sqe(15);
             data->iov = (struct iovec){ meta_old.buf, bs->meta_block_size };
             data->callback = simple_callback_w;
@@ -544,23 +544,25 @@ resume_1:
         }
         if (has_delete)
         {
-            clean_disk_entry *new_entry = (clean_disk_entry*)(meta_new.buf + meta_new.pos*bs->clean_entry_size);
+            clean_disk_entry *new_entry = (clean_disk_entry*)((uint8_t*)meta_new.buf + meta_new.pos*bs->clean_entry_size);
             if (new_entry->oid.inode != 0 && new_entry->oid != cur.oid)
             {
-                printf("Fatal error (metadata corruption or bug): tried to delete metadata entry %lu (%lx:%lx) while deleting %lx:%lx\n",
-                    clean_loc >> bs->block_order, new_entry->oid.inode, new_entry->oid.stripe, cur.oid.inode, cur.oid.stripe);
+                printf("Fatal error (metadata corruption or bug): tried to delete metadata entry %lu (%lx:%lx v%lu) while deleting %lx:%lx\n",
+                    clean_loc >> bs->block_order, new_entry->oid.inode, new_entry->oid.stripe,
+                    new_entry->version, cur.oid.inode, cur.oid.stripe);
                 exit(1);
             }
             // zero out new metadata entry
-            memset(meta_new.buf + meta_new.pos*bs->clean_entry_size, 0, bs->clean_entry_size);
+            memset((uint8_t*)meta_new.buf + meta_new.pos*bs->clean_entry_size, 0, bs->clean_entry_size);
         }
         else
         {
-            clean_disk_entry *new_entry = (clean_disk_entry*)(meta_new.buf + meta_new.pos*bs->clean_entry_size);
+            clean_disk_entry *new_entry = (clean_disk_entry*)((uint8_t*)meta_new.buf + meta_new.pos*bs->clean_entry_size);
             if (new_entry->oid.inode != 0 && new_entry->oid != cur.oid)
             {
-                printf("Fatal error (metadata corruption or bug): tried to overwrite non-zero metadata entry %lu (%lx:%lx) with %lx:%lx\n",
-                    clean_loc >> bs->block_order, new_entry->oid.inode, new_entry->oid.stripe, cur.oid.inode, cur.oid.stripe);
+                printf("Fatal error (metadata corruption or bug): tried to overwrite non-zero metadata entry %lu (%lx:%lx v%lu) with %lx:%lx v%lu\n",
+                    clean_loc >> bs->block_order, new_entry->oid.inode, new_entry->oid.stripe, new_entry->version,
+                    cur.oid.inode, cur.oid.stripe, cur.version);
                 exit(1);
             }
             new_entry->oid = cur.oid;
@@ -573,7 +575,7 @@ resume_1:
             if (bs->clean_entry_bitmap_size)
             {
                 void *bmp_ptr = bs->clean_entry_bitmap_size > sizeof(void*) ? dirty_end->second.bitmap : &dirty_end->second.bitmap;
-                memcpy((void*)(new_entry+1) + bs->clean_entry_bitmap_size, bmp_ptr, bs->clean_entry_bitmap_size);
+                memcpy((uint8_t*)(new_entry+1) + bs->clean_entry_bitmap_size, bmp_ptr, bs->clean_entry_bitmap_size);
             }
         }
         await_sqe(6);
@@ -743,12 +745,15 @@ bool journal_flusher_co::scan_dirty(int wait_base)
                 offset = dirty_it->second.offset;
                 end_offset = dirty_it->second.offset + dirty_it->second.len;
                 it = v.begin();
-                while (1)
+                while (end_offset > offset)
                 {
                     for (; it != v.end(); it++)
-                        if (it->offset >= offset)
+                        if (it->offset+it->len > offset)
                             break;
-                    if (it == v.end() || it->offset > offset && it->len > 0)
+                    // If all items end before offset or if the found item starts after end_offset, just insert the buffer
+                    // If (offset < it->offset < end_offset) insert (offset..it->offset) part
+                    // If (it->offset <= offset <= it->offset+it->len) then just skip to it->offset+it->len
+                    if (it == v.end() || it->offset > offset)
                     {
                         submit_offset = dirty_it->second.location + offset - dirty_it->second.offset;
                         submit_len = it == v.end() || it->offset >= end_offset ? end_offset-offset : it->offset-offset;
@@ -757,7 +762,7 @@ bool journal_flusher_co::scan_dirty(int wait_base)
                         if (bs->journal.inmemory)
                         {
                             // Take it from memory
-                            memcpy(it->buf, bs->journal.buffer + submit_offset, submit_len);
+                            memcpy(it->buf, (uint8_t*)bs->journal.buffer + submit_offset, submit_len);
                         }
                         else
                         {
@@ -772,7 +777,7 @@ bool journal_flusher_co::scan_dirty(int wait_base)
                         }
                     }
                     offset = it->offset+it->len;
-                    if (it == v.end() || offset >= end_offset)
+                    if (it == v.end())
                         break;
                 }
             }
@@ -821,7 +826,7 @@ bool journal_flusher_co::modify_meta_read(uint64_t meta_loc, flusher_meta_write_
     wr.pos = ((meta_loc >> bs->block_order) % (bs->meta_block_size / bs->clean_entry_size));
     if (bs->inmemory_meta)
     {
-        wr.buf = bs->metadata_buffer + wr.sector;
+        wr.buf = (uint8_t*)bs->metadata_buffer + wr.sector;
         return true;
     }
     wr.it = flusher->meta_sectors.find(wr.sector);

src/blockstore_impl.cpp

@@ -142,7 +142,6 @@ void blockstore_impl_t::loop()
                     continue;
                 }
             }
-            unsigned ring_space = ringloop->space_left();
             unsigned prev_sqe_pos = ringloop->save();
             // 0 = can't submit
             // 1 = in progress
@@ -212,7 +211,6 @@ void blockstore_impl_t::loop()
                 ringloop->restore(prev_sqe_pos);
                 if (PRIV(op)->wait_for == WAIT_SQE)
                 {
-                    PRIV(op)->wait_detail = 1 + ring_space;
                     // ring is full, stop submission
                     break;
                 }
@@ -235,6 +233,12 @@ void blockstore_impl_t::loop()
         {
             throw std::runtime_error(std::string("io_uring_submit: ") + strerror(-ret));
         }
+        for (auto s: journal.submitting_sectors)
+        {
+            // Mark journal sector writes as submitted
+            journal.sector_info[s].submit_id = 0;
+        }
+        journal.submitting_sectors.clear();
         if ((initial_ring_space - ringloop->space_left()) > 0)
         {
             live = true;
@@ -276,7 +280,7 @@ void blockstore_impl_t::check_wait(blockstore_op_t *op)
 {
     if (PRIV(op)->wait_for == WAIT_SQE)
     {
-        if (ringloop->space_left() < PRIV(op)->wait_detail)
+        if (ringloop->sqes_left() < PRIV(op)->wait_detail)
         {
             // stop submission if there's still no free space
 #ifdef BLOCKSTORE_DEBUG
@@ -366,7 +370,7 @@ void blockstore_impl_t::enqueue_op(blockstore_op_t *op)
                     };
                 }
                 unstable_writes.clear();
-                op->callback = [this, old_callback](blockstore_op_t *op)
+                op->callback = [old_callback](blockstore_op_t *op)
                 {
                     obj_ver_id *vers = (obj_ver_id*)op->buf;
                     delete[] vers;

src/blockstore_impl.h

@@ -54,6 +54,15 @@
 #define IS_BIG_WRITE(st) (((st) & 0x0F) == BS_ST_BIG_WRITE)
 #define IS_DELETE(st) (((st) & 0x0F) == BS_ST_DELETE)
 
+#define BS_SUBMIT_CHECK_SQES(n) \
+    if (ringloop->sqes_left() < (n))\
+    {\
+        /* Pause until there are more requests available */\
+        PRIV(op)->wait_detail = (n);\
+        PRIV(op)->wait_for = WAIT_SQE;\
+        return 0;\
+    }
+
 #define BS_SUBMIT_GET_SQE(sqe, data) \
     BS_SUBMIT_GET_ONLY_SQE(sqe); \
     struct ring_data_t *data = ((ring_data_t*)sqe->user_data)
@@ -63,6 +72,7 @@
     if (!sqe)\
     {\
         /* Pause until there are more requests available */\
+        PRIV(op)->wait_detail = 1;\
         PRIV(op)->wait_for = WAIT_SQE;\
         return 0;\
     }
@@ -72,6 +82,7 @@
     if (!sqe)\
     {\
         /* Pause until there are more requests available */\
+        PRIV(op)->wait_detail = 1;\
         PRIV(op)->wait_for = WAIT_SQE;\
         return 0;\
     }
@@ -170,7 +181,7 @@ struct blockstore_op_private_t
     std::vector<fulfill_read_t> read_vec;
 
     // Sync, write
-    uint64_t min_flushed_journal_sector, max_flushed_journal_sector;
+    int min_flushed_journal_sector, max_flushed_journal_sector;
 
     // Write
     struct iovec iov_zerofill[3];
@@ -251,6 +262,7 @@ class blockstore_impl_t
     int data_fd;
     uint64_t meta_size, meta_area, meta_len;
     uint64_t data_size, data_len;
+    uint64_t data_device_sect, meta_device_sect, journal_device_sect;
 
     void *metadata_buffer = NULL;
 
@@ -271,7 +283,7 @@ class blockstore_impl_t
 
     friend class blockstore_init_meta;
     friend class blockstore_init_journal;
-    friend class blockstore_journal_check_t;
+    friend struct blockstore_journal_check_t;
     friend class journal_flusher_t;
     friend class journal_flusher_co;
 
@@ -282,6 +294,10 @@ class blockstore_impl_t
     void open_journal();
     uint8_t* get_clean_entry_bitmap(uint64_t block_loc, int offset);
 
+    // Journaling
+    void prepare_journal_sector_write(int sector, blockstore_op_t *op);
+    void handle_journal_write(ring_data_t *data, uint64_t flush_id);
+
     // Asynchronous init
     int initialized;
     int metadata_buf_size;
@@ -309,21 +325,18 @@ class blockstore_impl_t
 
     // Sync
     int continue_sync(blockstore_op_t *op, bool queue_has_in_progress_sync);
-    void handle_sync_event(ring_data_t *data, blockstore_op_t *op);
     void ack_sync(blockstore_op_t *op);
 
     // Stabilize
     int dequeue_stable(blockstore_op_t *op);
     int continue_stable(blockstore_op_t *op);
     void mark_stable(const obj_ver_id & ov, bool forget_dirty = false);
-    void handle_stable_event(ring_data_t *data, blockstore_op_t *op);
     void stabilize_object(object_id oid, uint64_t max_ver);
 
     // Rollback
     int dequeue_rollback(blockstore_op_t *op);
     int continue_rollback(blockstore_op_t *op);
     void mark_rolled_back(const obj_ver_id & ov);
-    void handle_rollback_event(ring_data_t *data, blockstore_op_t *op);
     void erase_dirty(blockstore_dirty_db_t::iterator dirty_start, blockstore_dirty_db_t::iterator dirty_end, uint64_t clean_loc);
 
     // List

src/blockstore_init.cpp

@@ -148,7 +148,7 @@ resume_1:
         {
             GET_SQE();
             data->iov = {
-                metadata_buffer + (bs->inmemory_meta
+                (uint8_t*)metadata_buffer + (bs->inmemory_meta
                     ? metadata_read
                     : (prev == 1 ? bs->metadata_buf_size : 0)),
                 bs->meta_len - metadata_read > bs->metadata_buf_size ? bs->metadata_buf_size : bs->meta_len - metadata_read,
@@ -169,13 +169,13 @@ resume_1:
         if (prev_done)
         {
             void *done_buf = bs->inmemory_meta
-                ? (metadata_buffer + done_pos)
-                : (metadata_buffer + (prev_done == 2 ? bs->metadata_buf_size : 0));
+                ? ((uint8_t*)metadata_buffer + done_pos)
+                : ((uint8_t*)metadata_buffer + (prev_done == 2 ? bs->metadata_buf_size : 0));
             unsigned count = bs->meta_block_size / bs->clean_entry_size;
             for (int sector = 0; sector < done_len; sector += bs->meta_block_size)
             {
                 // handle <count> entries
-                handle_entries(done_buf + sector, count, bs->block_order);
+                handle_entries((uint8_t*)done_buf + sector, count, bs->block_order);
                 done_cnt += count;
             }
             prev_done = 0;
@@ -215,7 +215,7 @@ void blockstore_init_meta::handle_entries(void* entries, unsigned count, int blo
 {
     for (unsigned i = 0; i < count; i++)
     {
-        clean_disk_entry *entry = (clean_disk_entry*)(entries + i*bs->clean_entry_size);
+        clean_disk_entry *entry = (clean_disk_entry*)((uint8_t*)entries + i*bs->clean_entry_size);
         if (!bs->inmemory_meta && bs->clean_entry_bitmap_size)
         {
             memcpy(bs->clean_bitmap + (done_cnt+i)*2*bs->clean_entry_bitmap_size, &entry->bitmap, 2*bs->clean_entry_bitmap_size);
@@ -440,7 +440,7 @@ resume_1:
                 if (!bs->journal.inmemory)
                     submitted_buf = memalign_or_die(MEM_ALIGNMENT, JOURNAL_BUFFER_SIZE);
                 else
-                    submitted_buf = bs->journal.buffer + journal_pos;
+                    submitted_buf = (uint8_t*)bs->journal.buffer + journal_pos;
                 data->iov = {
                     submitted_buf,
                     end - journal_pos < JOURNAL_BUFFER_SIZE ? end - journal_pos : JOURNAL_BUFFER_SIZE,
@@ -570,7 +570,7 @@ int blockstore_init_journal::handle_journal_part(void *buf, uint64_t done_pos, u
     resume:
         while (pos < bs->journal.block_size)
         {
-            journal_entry *je = (journal_entry*)(buf + proc_pos - done_pos + pos);
+            journal_entry *je = (journal_entry*)((uint8_t*)buf + proc_pos - done_pos + pos);
             if (je->magic != JOURNAL_MAGIC || je_crc32(je) != je->crc32 ||
                 je->type < JE_MIN || je->type > JE_MAX || started && je->crc32_prev != crc32_last)
             {
@@ -619,7 +619,7 @@ int blockstore_init_journal::handle_journal_part(void *buf, uint64_t done_pos, u
                 if (location >= done_pos && location+je->small_write.len <= done_pos+len)
                 {
                     // data is within this buffer
-                    data_crc32 = crc32c(0, buf + location - done_pos, je->small_write.len);
+                    data_crc32 = crc32c(0, (uint8_t*)buf + location - done_pos, je->small_write.len);
                 }
                 else
                 {
@@ -634,7 +634,7 @@ int blockstore_init_journal::handle_journal_part(void *buf, uint64_t done_pos, u
                                 ? location+je->small_write.len : done[i].pos+done[i].len);
                             uint64_t part_begin = (location < done[i].pos ? done[i].pos : location);
                             covered += part_end - part_begin;
-                            data_crc32 = crc32c(data_crc32, done[i].buf + part_begin - done[i].pos, part_end - part_begin);
+                            data_crc32 = crc32c(data_crc32, (uint8_t*)done[i].buf + part_begin - done[i].pos, part_end - part_begin);
                         }
                     }
                     if (covered < je->small_write.len)
@@ -650,9 +650,9 @@ int blockstore_init_journal::handle_journal_part(void *buf, uint64_t done_pos, u
                     // interesting thing is that we must clear the corrupt entry if we're not readonly,
                     // because we don't write next entries in the same journal block
                     printf("Journal entry data is corrupt (data crc32 %x != %x)\n", data_crc32, je->small_write.crc32_data);
-                    memset(buf + proc_pos - done_pos + pos, 0, bs->journal.block_size - pos);
+                    memset((uint8_t*)buf + proc_pos - done_pos + pos, 0, bs->journal.block_size - pos);
                     bs->journal.next_free = prev_free;
-                    init_write_buf = buf + proc_pos - done_pos;
+                    init_write_buf = (uint8_t*)buf + proc_pos - done_pos;
                     init_write_sector = proc_pos;
                     return 0;
                 }
@@ -665,7 +665,7 @@ int blockstore_init_journal::handle_journal_part(void *buf, uint64_t done_pos, u
                         .version = je->small_write.version,
                     };
                     void *bmp = NULL;
-                    void *bmp_from = (void*)je + sizeof(journal_entry_small_write);
+                    void *bmp_from = (uint8_t*)je + sizeof(journal_entry_small_write);
                     if (bs->clean_entry_bitmap_size <= sizeof(void*))
                     {
                         memcpy(&bmp, bmp_from, bs->clean_entry_bitmap_size);
@@ -745,7 +745,7 @@ int blockstore_init_journal::handle_journal_part(void *buf, uint64_t done_pos, u
                         .version = je->big_write.version,
                     };
                     void *bmp = NULL;
-                    void *bmp_from = (void*)je + sizeof(journal_entry_big_write);
+                    void *bmp_from = (uint8_t*)je + sizeof(journal_entry_big_write);
                     if (bs->clean_entry_bitmap_size <= sizeof(void*))
                     {
                         memcpy(&bmp, bmp_from, bs->clean_entry_bitmap_size);

src/blockstore_init.h

@@ -6,7 +6,7 @@
 class blockstore_init_meta
 {
     blockstore_impl_t *bs;
-    int wait_state = 0, wait_count = 0;
+    int wait_state = 0;
     bool zero_on_init = false;
     void *metadata_buffer = NULL;
     uint64_t metadata_read = 0;

src/blockstore_journal.cpp

@@ -96,7 +96,8 @@ int blockstore_journal_check_t::check_available(blockstore_op_t *op, int entries
         next_pos = next_pos + data_after;
         if (next_pos > bs->journal.len)
         {
-            next_pos = bs->journal.block_size + data_after;
+            if (right_dir)
+                next_pos = bs->journal.block_size + data_after;
             right_dir = false;
         }
     }
@@ -136,13 +137,13 @@ journal_entry* prefill_single_journal_entry(journal_t & journal, uint16_t type,
         journal.in_sector_pos = 0;
         journal.next_free = (journal.next_free+journal.block_size) < journal.len ? journal.next_free + journal.block_size : journal.block_size;
         memset(journal.inmemory
-            ? journal.buffer + journal.sector_info[journal.cur_sector].offset
-            : journal.sector_buf + journal.block_size*journal.cur_sector, 0, journal.block_size);
+            ? (uint8_t*)journal.buffer + journal.sector_info[journal.cur_sector].offset
+            : (uint8_t*)journal.sector_buf + journal.block_size*journal.cur_sector, 0, journal.block_size);
     }
     journal_entry *je = (struct journal_entry*)(
         (journal.inmemory
-            ? journal.buffer + journal.sector_info[journal.cur_sector].offset
-            : journal.sector_buf + journal.block_size*journal.cur_sector) + journal.in_sector_pos
+            ? (uint8_t*)journal.buffer + journal.sector_info[journal.cur_sector].offset
+            : (uint8_t*)journal.sector_buf + journal.block_size*journal.cur_sector) + journal.in_sector_pos
     );
     journal.in_sector_pos += size;
     je->magic = JOURNAL_MAGIC;
@@ -153,22 +154,73 @@ journal_entry* prefill_single_journal_entry(journal_t & journal, uint16_t type,
     return je;
 }
 
-void prepare_journal_sector_write(journal_t & journal, int cur_sector, io_uring_sqe *sqe, std::function<void(ring_data_t*)> cb)
+void blockstore_impl_t::prepare_journal_sector_write(int cur_sector, blockstore_op_t *op)
 {
+    // Don't submit the same sector twice in the same batch
+    if (!journal.sector_info[cur_sector].submit_id)
+    {
+        io_uring_sqe *sqe = get_sqe();
+        // Caller must ensure availability of an SQE
+        assert(sqe != NULL);
+        ring_data_t *data = ((ring_data_t*)sqe->user_data);
+        journal.sector_info[cur_sector].written = true;
+        journal.sector_info[cur_sector].submit_id = ++journal.submit_id;
+        journal.submitting_sectors.push_back(cur_sector);
+        journal.sector_info[cur_sector].flush_count++;
+        data->iov = (struct iovec){
+            (journal.inmemory
+                ? (uint8_t*)journal.buffer + journal.sector_info[cur_sector].offset
+                : (uint8_t*)journal.sector_buf + journal.block_size*cur_sector),
+            journal.block_size
+        };
+        data->callback = [this, flush_id = journal.submit_id](ring_data_t *data) { handle_journal_write(data, flush_id); };
+        my_uring_prep_writev(
+            sqe, journal.fd, &data->iov, 1, journal.offset + journal.sector_info[cur_sector].offset
+        );
+    }
     journal.sector_info[cur_sector].dirty = false;
-    journal.sector_info[cur_sector].written = true;
-    journal.sector_info[cur_sector].flush_count++;
-    ring_data_t *data = ((ring_data_t*)sqe->user_data);
-    data->iov = (struct iovec){
-        (journal.inmemory
-            ? journal.buffer + journal.sector_info[cur_sector].offset
-            : journal.sector_buf + journal.block_size*cur_sector),
-        journal.block_size
-    };
-    data->callback = cb;
-    my_uring_prep_writev(
-        sqe, journal.fd, &data->iov, 1, journal.offset + journal.sector_info[cur_sector].offset
-    );
+    // But always remember that this operation has to wait until this exact journal write is finished
+    journal.flushing_ops.insert((pending_journaling_t){
+        .flush_id = journal.sector_info[cur_sector].submit_id,
+        .sector = cur_sector,
+        .op = op,
+    });
+    auto priv = PRIV(op);
+    priv->pending_ops++;
+    if (!priv->min_flushed_journal_sector)
+        priv->min_flushed_journal_sector = 1+cur_sector;
+    priv->max_flushed_journal_sector = 1+cur_sector;
+}
+
+void blockstore_impl_t::handle_journal_write(ring_data_t *data, uint64_t flush_id)
+{
+    live = true;
+    if (data->res != data->iov.iov_len)
+    {
+        // FIXME: our state becomes corrupted after a write error. maybe do something better than just die
+        throw std::runtime_error(
+            "journal write failed ("+std::to_string(data->res)+" != "+std::to_string(data->iov.iov_len)+
+            "). in-memory state is corrupted. AAAAAAAaaaaaaaaa!!!111"
+        );
+    }
+    auto fl_it = journal.flushing_ops.upper_bound((pending_journaling_t){ .flush_id = flush_id });
+    if (fl_it != journal.flushing_ops.end() && fl_it->flush_id == flush_id)
+    {
+        journal.sector_info[fl_it->sector].flush_count--;
+    }
+    while (fl_it != journal.flushing_ops.end() && fl_it->flush_id == flush_id)
+    {
+        auto priv = PRIV(fl_it->op);
+        priv->pending_ops--;
+        assert(priv->pending_ops >= 0);
+        if (priv->pending_ops == 0)
+        {
+            release_journal_sectors(fl_it->op);
+            priv->op_state++;
+            ringloop->wakeup();
+        }
+        journal.flushing_ops.erase(fl_it++);
+    }
 }
 
 journal_t::~journal_t()

src/blockstore_journal.h

@@ -4,6 +4,7 @@
 #pragma once
 
 #include "crc32c.h"
+#include <set>
 
 #define MIN_JOURNAL_SIZE 4*1024*1024
 #define JOURNAL_MAGIC 0x4A33
@@ -145,8 +146,21 @@ struct journal_sector_info_t
     uint64_t flush_count;
     bool written;
     bool dirty;
+    uint64_t submit_id;
 };
 
+struct pending_journaling_t
+{
+    uint64_t flush_id;
+    int sector;
+    blockstore_op_t *op;
+};
+
+inline bool operator < (const pending_journaling_t & a, const pending_journaling_t & b)
+{
+    return a.flush_id < b.flush_id || a.flush_id == b.flush_id && a.op < b.op;
+}
+
 struct journal_t
 {
     int fd;
@@ -172,6 +186,9 @@ struct journal_t
     bool no_same_sector_overwrites = false;
     int cur_sector = 0;
     int in_sector_pos = 0;
+    std::vector<int> submitting_sectors;
+    std::set<pending_journaling_t> flushing_ops;
+    uint64_t submit_id = 0;
 
     // Used sector map
     // May use ~ 80 MB per 1 GB of used journal space in the worst case
@@ -200,5 +217,3 @@ struct blockstore_journal_check_t
 };
 
 journal_entry* prefill_single_journal_entry(journal_t & journal, uint16_t type, uint32_t size);
-
-void prepare_journal_sector_write(journal_t & journal, int sector, io_uring_sqe *sqe, std::function<void(ring_data_t*)> cb);

src/blockstore_open.cpp

@@ -295,9 +295,9 @@ void blockstore_impl_t::calc_lengths()
     }
 }
 
-void check_size(int fd, uint64_t *size, std::string name)
+static void check_size(int fd, uint64_t *size, uint64_t *sectsize, std::string name)
 {
-    int sectsize;
+    int sect;
     struct stat st;
     if (fstat(fd, &st) < 0)
     {
@@ -306,14 +306,21 @@ void check_size(int fd, uint64_t *size, std::string name)
     if (S_ISREG(st.st_mode))
     {
         *size = st.st_size;
+        if (sectsize)
+        {
+            *sectsize = st.st_blksize;
+        }
     }
     else if (S_ISBLK(st.st_mode))
     {
-        if (ioctl(fd, BLKSSZGET, &sectsize) < 0 ||
-            ioctl(fd, BLKGETSIZE64, size) < 0 ||
-            sectsize != 512)
+        if (ioctl(fd, BLKGETSIZE64, size) < 0 ||
+            ioctl(fd, BLKSSZGET, &sect) < 0)
         {
-            throw std::runtime_error(name+" sector is not equal to 512 bytes");
+            throw std::runtime_error("failed to get "+name+" size or block size: "+strerror(errno));
+        }
+        if (sectsize)
+        {
+            *sectsize = sect;
         }
     }
     else
@@ -329,7 +336,14 @@ void blockstore_impl_t::open_data()
     {
         throw std::runtime_error("Failed to open data device");
     }
-    check_size(data_fd, &data_size, "data device");
+    check_size(data_fd, &data_size, &data_device_sect, "data device");
+    if (disk_alignment % data_device_sect)
+    {
+        throw std::runtime_error(
+            "disk_alignment ("+std::to_string(disk_alignment)+
+            ") is not a multiple of data device sector size ("+std::to_string(data_device_sect)+")"
+        );
+    }
     if (data_offset >= data_size)
     {
         throw std::runtime_error("data_offset exceeds device size = "+std::to_string(data_size));
@@ -350,7 +364,7 @@ void blockstore_impl_t::open_meta()
         {
             throw std::runtime_error("Failed to open metadata device");
         }
-        check_size(meta_fd, &meta_size, "metadata device");
+        check_size(meta_fd, &meta_size, &meta_device_sect, "metadata device");
         if (meta_offset >= meta_size)
         {
             throw std::runtime_error("meta_offset exceeds device size = "+std::to_string(meta_size));
@@ -363,12 +377,20 @@ void blockstore_impl_t::open_meta()
     else
     {
         meta_fd = data_fd;
+        meta_device_sect = data_device_sect;
         meta_size = 0;
         if (meta_offset >= data_size)
         {
             throw std::runtime_error("meta_offset exceeds device size = "+std::to_string(data_size));
         }
     }
+    if (meta_block_size % meta_device_sect)
+    {
+        throw std::runtime_error(
+            "meta_block_size ("+std::to_string(meta_block_size)+
+            ") is not a multiple of data device sector size ("+std::to_string(meta_device_sect)+")"
+        );
+    }
 }
 
 void blockstore_impl_t::open_journal()
@@ -380,7 +402,7 @@ void blockstore_impl_t::open_journal()
         {
             throw std::runtime_error("Failed to open journal device");
         }
-        check_size(journal.fd, &journal.device_size, "journal device");
+        check_size(journal.fd, &journal.device_size, &journal_device_sect, "journal device");
         if (!disable_flock && flock(journal.fd, LOCK_EX|LOCK_NB) != 0)
         {
             throw std::runtime_error(std::string("Failed to lock journal device: ") + strerror(errno));
@@ -389,6 +411,7 @@ void blockstore_impl_t::open_journal()
     else
     {
         journal.fd = meta_fd;
+        journal_device_sect = meta_device_sect;
         journal.device_size = 0;
         if (journal.offset >= data_size)
         {
@@ -406,4 +429,11 @@ void blockstore_impl_t::open_journal()
         if (!journal.sector_buf)
             throw std::bad_alloc();
     }
+    if (journal_block_size % journal_device_sect)
+    {
+        throw std::runtime_error(
+            "journal_block_size ("+std::to_string(journal_block_size)+
+            ") is not a multiple of journal device sector size ("+std::to_string(journal_device_sect)+")"
+        );
+    }
 }

src/blockstore_read.cpp

@@ -24,7 +24,7 @@ int blockstore_impl_t::fulfill_read_push(blockstore_op_t *op, void *buf, uint64_
     }
     if (journal.inmemory && IS_JOURNAL(item_state))
     {
-        memcpy(buf, journal.buffer + offset, len);
+        memcpy(buf, (uint8_t*)journal.buffer + offset, len);
         return 1;
     }
     BS_SUBMIT_GET_SQE(sqe, data);
@@ -75,7 +75,7 @@ int blockstore_impl_t::fulfill_read(blockstore_op_t *read_op, uint64_t &fulfille
                 };
                 it = PRIV(read_op)->read_vec.insert(it, el);
                 if (!fulfill_read_push(read_op,
-                    read_op->buf + el.offset - read_op->offset,
+                    (uint8_t*)read_op->buf + el.offset - read_op->offset,
                     item_location + el.offset - item_start,
                     el.len, item_state, item_version))
                 {
@@ -102,7 +102,7 @@ uint8_t* blockstore_impl_t::get_clean_entry_bitmap(uint64_t block_loc, int offse
     {
         uint64_t sector = (meta_loc / (meta_block_size / clean_entry_size)) * meta_block_size;
         uint64_t pos = (meta_loc % (meta_block_size / clean_entry_size));
-        clean_entry_bitmap = (uint8_t*)(metadata_buffer + sector + pos*clean_entry_size + sizeof(clean_disk_entry) + offset);
+        clean_entry_bitmap = ((uint8_t*)metadata_buffer + sector + pos*clean_entry_size + sizeof(clean_disk_entry) + offset);
     }
     else
         clean_entry_bitmap = (uint8_t*)(clean_bitmap + meta_loc*2*clean_entry_bitmap_size + offset);

src/blockstore_rollback.cpp

@@ -74,24 +74,17 @@ skip_ov:
     {
         return 0;
     }
-    // There is sufficient space. Get SQEs
-    struct io_uring_sqe *sqe[space_check.sectors_to_write];
-    for (i = 0; i < space_check.sectors_to_write; i++)
-    {
-        BS_SUBMIT_GET_SQE_DECL(sqe[i]);
-    }
+    // There is sufficient space. Check SQEs
+    BS_SUBMIT_CHECK_SQES(space_check.sectors_to_write);
     // Prepare and submit journal entries
-    auto cb = [this, op](ring_data_t *data) { handle_rollback_event(data, op); };
-    int s = 0, cur_sector = -1;
+    int s = 0;
     for (i = 0, v = (obj_ver_id*)op->buf; i < op->len; i++, v++)
     {
         if (!journal.entry_fits(sizeof(journal_entry_rollback)) &&
             journal.sector_info[journal.cur_sector].dirty)
         {
-            if (cur_sector == -1)
-                PRIV(op)->min_flushed_journal_sector = 1 + journal.cur_sector;
-            prepare_journal_sector_write(journal, journal.cur_sector, sqe[s++], cb);
-            cur_sector = journal.cur_sector;
+            prepare_journal_sector_write(journal.cur_sector, op);
+            s++;
         }
         journal_entry_rollback *je = (journal_entry_rollback*)
             prefill_single_journal_entry(journal, JE_ROLLBACK, sizeof(journal_entry_rollback));
@@ -100,12 +93,9 @@ skip_ov:
         je->crc32 = je_crc32((journal_entry*)je);
         journal.crc32_last = je->crc32;
     }
-    prepare_journal_sector_write(journal, journal.cur_sector, sqe[s++], cb);
+    prepare_journal_sector_write(journal.cur_sector, op);
+    s++;
     assert(s == space_check.sectors_to_write);
-    if (cur_sector == -1)
-        PRIV(op)->min_flushed_journal_sector = 1 + journal.cur_sector;
-    PRIV(op)->max_flushed_journal_sector = 1 + journal.cur_sector;
-    PRIV(op)->pending_ops = s;
     PRIV(op)->op_state = 1;
     return 1;
 }
@@ -114,30 +104,23 @@ int blockstore_impl_t::continue_rollback(blockstore_op_t *op)
 {
     if (PRIV(op)->op_state == 2)
         goto resume_2;
-    else if (PRIV(op)->op_state == 3)
-        goto resume_3;
-    else if (PRIV(op)->op_state == 5)
-        goto resume_5;
+    else if (PRIV(op)->op_state == 4)
+        goto resume_4;
     else
         return 1;
 resume_2:
-    // Release used journal sectors
-    release_journal_sectors(op);
-resume_3:
     if (!disable_journal_fsync)
     {
-        io_uring_sqe *sqe;
-        BS_SUBMIT_GET_SQE_DECL(sqe);
-        ring_data_t *data = ((ring_data_t*)sqe->user_data);
+        BS_SUBMIT_GET_SQE(sqe, data);
         my_uring_prep_fsync(sqe, journal.fd, IORING_FSYNC_DATASYNC);
         data->iov = { 0 };
-        data->callback = [this, op](ring_data_t *data) { handle_rollback_event(data, op); };
+        data->callback = [this, op](ring_data_t *data) { handle_write_event(data, op); };
         PRIV(op)->min_flushed_journal_sector = PRIV(op)->max_flushed_journal_sector = 0;
         PRIV(op)->pending_ops = 1;
-        PRIV(op)->op_state = 4;
+        PRIV(op)->op_state = 3;
         return 1;
     }
-resume_5:
+resume_4:
     obj_ver_id* v;
     int i;
     for (i = 0, v = (obj_ver_id*)op->buf; i < op->len; i++, v++)
@@ -196,24 +179,6 @@ void blockstore_impl_t::mark_rolled_back(const obj_ver_id & ov)
     }
 }
 
-void blockstore_impl_t::handle_rollback_event(ring_data_t *data, blockstore_op_t *op)
-{
-    live = true;
-    if (data->res != data->iov.iov_len)
-    {
-        throw std::runtime_error(
-            "write operation failed ("+std::to_string(data->res)+" != "+std::to_string(data->iov.iov_len)+
-            "). in-memory state is corrupted. AAAAAAAaaaaaaaaa!!!111"
-        );
-    }
-    PRIV(op)->pending_ops--;
-    if (PRIV(op)->pending_ops == 0)
-    {
-        PRIV(op)->op_state++;
-        ringloop->wakeup();
-    }
-}
-
 void blockstore_impl_t::erase_dirty(blockstore_dirty_db_t::iterator dirty_start, blockstore_dirty_db_t::iterator dirty_end, uint64_t clean_loc)
 {
     if (dirty_end == dirty_start)

src/blockstore_stable.cpp

@@ -97,25 +97,18 @@ int blockstore_impl_t::dequeue_stable(blockstore_op_t *op)
     {
         return 0;
     }
-    // There is sufficient space. Get SQEs
-    struct io_uring_sqe *sqe[space_check.sectors_to_write];
-    for (i = 0; i < space_check.sectors_to_write; i++)
-    {
-        BS_SUBMIT_GET_SQE_DECL(sqe[i]);
-    }
+    // There is sufficient space. Check SQEs
+    BS_SUBMIT_CHECK_SQES(space_check.sectors_to_write);
     // Prepare and submit journal entries
-    auto cb = [this, op](ring_data_t *data) { handle_stable_event(data, op); };
-    int s = 0, cur_sector = -1;
+    int s = 0;
     for (i = 0, v = (obj_ver_id*)op->buf; i < op->len; i++, v++)
     {
         // FIXME: Only stabilize versions that aren't stable yet
         if (!journal.entry_fits(sizeof(journal_entry_stable)) &&
             journal.sector_info[journal.cur_sector].dirty)
         {
-            if (cur_sector == -1)
-                PRIV(op)->min_flushed_journal_sector = 1 + journal.cur_sector;
-            prepare_journal_sector_write(journal, journal.cur_sector, sqe[s++], cb);
-            cur_sector = journal.cur_sector;
+            prepare_journal_sector_write(journal.cur_sector, op);
+            s++;
         }
         journal_entry_stable *je = (journal_entry_stable*)
             prefill_single_journal_entry(journal, JE_STABLE, sizeof(journal_entry_stable));
@@ -124,12 +117,9 @@ int blockstore_impl_t::dequeue_stable(blockstore_op_t *op)
         je->crc32 = je_crc32((journal_entry*)je);
         journal.crc32_last = je->crc32;
     }
-    prepare_journal_sector_write(journal, journal.cur_sector, sqe[s++], cb);
+    prepare_journal_sector_write(journal.cur_sector, op);
+    s++;
     assert(s == space_check.sectors_to_write);
-    if (cur_sector == -1)
-        PRIV(op)->min_flushed_journal_sector = 1 + journal.cur_sector;
-    PRIV(op)->max_flushed_journal_sector = 1 + journal.cur_sector;
-    PRIV(op)->pending_ops = s;
     PRIV(op)->op_state = 1;
     return 1;
 }
@@ -138,30 +128,23 @@ int blockstore_impl_t::continue_stable(blockstore_op_t *op)
 {
     if (PRIV(op)->op_state == 2)
         goto resume_2;
-    else if (PRIV(op)->op_state == 3)
-        goto resume_3;
-    else if (PRIV(op)->op_state == 5)
-        goto resume_5;
+    else if (PRIV(op)->op_state == 4)
+        goto resume_4;
     else
         return 1;
 resume_2:
-    // Release used journal sectors
-    release_journal_sectors(op);
-resume_3:
     if (!disable_journal_fsync)
     {
-        io_uring_sqe *sqe;
-        BS_SUBMIT_GET_SQE_DECL(sqe);
-        ring_data_t *data = ((ring_data_t*)sqe->user_data);
+        BS_SUBMIT_GET_SQE(sqe, data);
         my_uring_prep_fsync(sqe, journal.fd, IORING_FSYNC_DATASYNC);
         data->iov = { 0 };
-        data->callback = [this, op](ring_data_t *data) { handle_stable_event(data, op); };
+        data->callback = [this, op](ring_data_t *data) { handle_write_event(data, op); };
         PRIV(op)->min_flushed_journal_sector = PRIV(op)->max_flushed_journal_sector = 0;
         PRIV(op)->pending_ops = 1;
-        PRIV(op)->op_state = 4;
+        PRIV(op)->op_state = 3;
         return 1;
     }
-resume_5:
+resume_4:
     // Mark dirty_db entries as stable, acknowledge op completion
     obj_ver_id* v;
     int i;
@@ -257,21 +240,3 @@ void blockstore_impl_t::mark_stable(const obj_ver_id & v, bool forget_dirty)
         unstable_writes.erase(unstab_it);
     }
 }
-
-void blockstore_impl_t::handle_stable_event(ring_data_t *data, blockstore_op_t *op)
-{
-    live = true;
-    if (data->res != data->iov.iov_len)
-    {
-        throw std::runtime_error(
-            "write operation failed ("+std::to_string(data->res)+" != "+std::to_string(data->iov.iov_len)+
-            "). in-memory state is corrupted. AAAAAAAaaaaaaaaa!!!111"
-        );
-    }
-    PRIV(op)->pending_ops--;
-    if (PRIV(op)->pending_ops == 0)
-    {
-        PRIV(op)->op_state++;
-        ringloop->wakeup();
-    }
-}

src/blockstore_sync.cpp

@@ -44,10 +44,8 @@ int blockstore_impl_t::continue_sync(blockstore_op_t *op, bool queue_has_in_prog
         if (journal.sector_info[journal.cur_sector].dirty)
         {
             // Write out the last journal sector if it happens to be dirty
-            BS_SUBMIT_GET_ONLY_SQE(sqe);
-            prepare_journal_sector_write(journal, journal.cur_sector, sqe, [this, op](ring_data_t *data) { handle_sync_event(data, op); });
-            PRIV(op)->min_flushed_journal_sector = PRIV(op)->max_flushed_journal_sector = 1 + journal.cur_sector;
-            PRIV(op)->pending_ops = 1;
+            BS_SUBMIT_CHECK_SQES(1);
+            prepare_journal_sector_write(journal.cur_sector, op);
             PRIV(op)->op_state = SYNC_JOURNAL_WRITE_SENT;
             return 1;
         }
@@ -64,7 +62,7 @@ int blockstore_impl_t::continue_sync(blockstore_op_t *op, bool queue_has_in_prog
             BS_SUBMIT_GET_SQE(sqe, data);
             my_uring_prep_fsync(sqe, data_fd, IORING_FSYNC_DATASYNC);
             data->iov = { 0 };
-            data->callback = [this, op](ring_data_t *data) { handle_sync_event(data, op); };
+            data->callback = [this, op](ring_data_t *data) { handle_write_event(data, op); };
             PRIV(op)->min_flushed_journal_sector = PRIV(op)->max_flushed_journal_sector = 0;
             PRIV(op)->pending_ops = 1;
             PRIV(op)->op_state = SYNC_DATA_SYNC_SENT;
@@ -85,24 +83,18 @@ int blockstore_impl_t::continue_sync(blockstore_op_t *op, bool queue_has_in_prog
         {
             return 0;
         }
-        // Get SQEs. Don't bother about merging, submit each journal sector as a separate request
-        struct io_uring_sqe *sqe[space_check.sectors_to_write];
-        for (int i = 0; i < space_check.sectors_to_write; i++)
-        {
-            BS_SUBMIT_GET_SQE_DECL(sqe[i]);
-        }
+        // Check SQEs. Don't bother about merging, submit each journal sector as a separate request
+        BS_SUBMIT_CHECK_SQES(space_check.sectors_to_write);
         // Prepare and submit journal entries
         auto it = PRIV(op)->sync_big_writes.begin();
-        int s = 0, cur_sector = -1;
+        int s = 0;
         while (it != PRIV(op)->sync_big_writes.end())
         {
             if (!journal.entry_fits(sizeof(journal_entry_big_write) + clean_entry_bitmap_size) &&
                 journal.sector_info[journal.cur_sector].dirty)
             {
-                if (cur_sector == -1)
-                    PRIV(op)->min_flushed_journal_sector = 1 + journal.cur_sector;
-                prepare_journal_sector_write(journal, journal.cur_sector, sqe[s++], [this, op](ring_data_t *data) { handle_sync_event(data, op); });
-                cur_sector = journal.cur_sector;
+                prepare_journal_sector_write(journal.cur_sector, op);
+                s++;
             }
             auto & dirty_entry = dirty_db.at(*it);
             journal_entry_big_write *je = (journal_entry_big_write*)prefill_single_journal_entry(
@@ -129,12 +121,9 @@ int blockstore_impl_t::continue_sync(blockstore_op_t *op, bool queue_has_in_prog
             journal.crc32_last = je->crc32;
             it++;
         }
-        prepare_journal_sector_write(journal, journal.cur_sector, sqe[s++], [this, op](ring_data_t *data) { handle_sync_event(data, op); });
+        prepare_journal_sector_write(journal.cur_sector, op);
+        s++;
         assert(s == space_check.sectors_to_write);
-        if (cur_sector == -1)
-            PRIV(op)->min_flushed_journal_sector = 1 + journal.cur_sector;
-        PRIV(op)->max_flushed_journal_sector = 1 + journal.cur_sector;
-        PRIV(op)->pending_ops = s;
         PRIV(op)->op_state = SYNC_JOURNAL_WRITE_SENT;
         return 1;
     }
@@ -145,7 +134,7 @@ int blockstore_impl_t::continue_sync(blockstore_op_t *op, bool queue_has_in_prog
             BS_SUBMIT_GET_SQE(sqe, data);
             my_uring_prep_fsync(sqe, journal.fd, IORING_FSYNC_DATASYNC);
             data->iov = { 0 };
-            data->callback = [this, op](ring_data_t *data) { handle_sync_event(data, op); };
+            data->callback = [this, op](ring_data_t *data) { handle_write_event(data, op); };
             PRIV(op)->min_flushed_journal_sector = PRIV(op)->max_flushed_journal_sector = 0;
             PRIV(op)->pending_ops = 1;
             PRIV(op)->op_state = SYNC_JOURNAL_SYNC_SENT;
@@ -164,42 +153,6 @@ int blockstore_impl_t::continue_sync(blockstore_op_t *op, bool queue_has_in_prog
     return 1;
 }
 
-void blockstore_impl_t::handle_sync_event(ring_data_t *data, blockstore_op_t *op)
-{
-    live = true;
-    if (data->res != data->iov.iov_len)
-    {
-        throw std::runtime_error(
-            "write operation failed ("+std::to_string(data->res)+" != "+std::to_string(data->iov.iov_len)+
-            "). in-memory state is corrupted. AAAAAAAaaaaaaaaa!!!111"
-        );
-    }
-    PRIV(op)->pending_ops--;
-    if (PRIV(op)->pending_ops == 0)
-    {
-        // Release used journal sectors
-        release_journal_sectors(op);
-        // Handle states
-        if (PRIV(op)->op_state == SYNC_DATA_SYNC_SENT)
-        {
-            PRIV(op)->op_state = SYNC_DATA_SYNC_DONE;
-        }
-        else if (PRIV(op)->op_state == SYNC_JOURNAL_WRITE_SENT)
-        {
-            PRIV(op)->op_state = SYNC_JOURNAL_WRITE_DONE;
-        }
-        else if (PRIV(op)->op_state == SYNC_JOURNAL_SYNC_SENT)
-        {
-            PRIV(op)->op_state = SYNC_DONE;
-        }
-        else
-        {
-            throw std::runtime_error("BUG: unexpected sync op state");
-        }
-        ringloop->wakeup();
-    }
-}
-
 void blockstore_impl_t::ack_sync(blockstore_op_t *op)
 {
     // Handle states

src/blockstore_write.cpp

@@ -102,7 +102,7 @@ bool blockstore_impl_t::enqueue_write(blockstore_op_t *op)
         // Issue an additional sync so that the previous big write can reach the journal
         blockstore_op_t *sync_op = new blockstore_op_t;
         sync_op->opcode = BS_OP_SYNC;
-        sync_op->callback = [this, op](blockstore_op_t *sync_op)
+        sync_op->callback = [](blockstore_op_t *sync_op)
         {
             delete sync_op;
         };
@@ -268,8 +268,8 @@ int blockstore_impl_t::dequeue_write(blockstore_op_t *op)
             cancel_all_writes(op, dirty_it, -ENOSPC);
             return 2;
         }
-        write_iodepth++;
         BS_SUBMIT_GET_SQE(sqe, data);
+        write_iodepth++;
         dirty_it->second.location = loc << block_order;
         dirty_it->second.state = (dirty_it->second.state & ~BS_ST_WORKFLOW_MASK) | BS_ST_SUBMITTED;
 #ifdef BLOCKSTORE_DEBUG
@@ -324,29 +324,21 @@ int blockstore_impl_t::dequeue_write(blockstore_op_t *op)
         {
             return 0;
         }
-        write_iodepth++;
-        // There is sufficient space. Get SQE(s)
-        struct io_uring_sqe *sqe1 = NULL;
-        if (immediate_commit != IMMEDIATE_NONE ||
-            !journal.entry_fits(sizeof(journal_entry_small_write) + clean_entry_bitmap_size))
-        {
+        // There is sufficient space. Check SQE(s)
+        BS_SUBMIT_CHECK_SQES(
             // Write current journal sector only if it's dirty and full, or in the immediate_commit mode
-            BS_SUBMIT_GET_SQE_DECL(sqe1);
-        }
-        struct io_uring_sqe *sqe2 = NULL;
-        if (op->len > 0)
-        {
-            BS_SUBMIT_GET_SQE_DECL(sqe2);
-        }
+            (immediate_commit != IMMEDIATE_NONE ||
+                !journal.entry_fits(sizeof(journal_entry_small_write) + clean_entry_bitmap_size) ? 1 : 0) +
+            (op->len > 0 ? 1 : 0)
+        );
+        write_iodepth++;
         // Got SQEs. Prepare previous journal sector write if required
         auto cb = [this, op](ring_data_t *data) { handle_write_event(data, op); };
         if (immediate_commit == IMMEDIATE_NONE)
         {
-            if (sqe1)
+            if (!journal.entry_fits(sizeof(journal_entry_small_write) + clean_entry_bitmap_size))
             {
-                prepare_journal_sector_write(journal, journal.cur_sector, sqe1, cb);
-                PRIV(op)->min_flushed_journal_sector = PRIV(op)->max_flushed_journal_sector = 1 + journal.cur_sector;
-                PRIV(op)->pending_ops++;
+                prepare_journal_sector_write(journal.cur_sector, op);
             }
             else
             {
@@ -380,9 +372,7 @@ int blockstore_impl_t::dequeue_write(blockstore_op_t *op)
         journal.crc32_last = je->crc32;
         if (immediate_commit != IMMEDIATE_NONE)
         {
-            prepare_journal_sector_write(journal, journal.cur_sector, sqe1, cb);
-            PRIV(op)->min_flushed_journal_sector = PRIV(op)->max_flushed_journal_sector = 1 + journal.cur_sector;
-            PRIV(op)->pending_ops++;
+            prepare_journal_sector_write(journal.cur_sector, op);
         }
         if (op->len > 0)
         {
@@ -390,9 +380,9 @@ int blockstore_impl_t::dequeue_write(blockstore_op_t *op)
             if (journal.inmemory)
             {
                 // Copy data
-                memcpy(journal.buffer + journal.next_free, op->buf, op->len);
+                memcpy((uint8_t*)journal.buffer + journal.next_free, op->buf, op->len);
             }
-            ring_data_t *data2 = ((ring_data_t*)sqe2->user_data);
+            BS_SUBMIT_GET_SQE(sqe2, data2);
             data2->iov = (struct iovec){ op->buf, op->len };
             data2->callback = cb;
             my_uring_prep_writev(
@@ -441,13 +431,12 @@ int blockstore_impl_t::continue_write(blockstore_op_t *op)
 resume_2:
     // Only for the immediate_commit mode: prepare and submit big_write journal entry
     {
+        BS_SUBMIT_CHECK_SQES(1);
         auto dirty_it = dirty_db.find((obj_ver_id){
             .oid = op->oid,
             .version = op->version,
         });
         assert(dirty_it != dirty_db.end());
-        io_uring_sqe *sqe = NULL;
-        BS_SUBMIT_GET_SQE_DECL(sqe);
         journal_entry_big_write *je = (journal_entry_big_write*)prefill_single_journal_entry(
             journal, op->opcode == BS_OP_WRITE_STABLE ? JE_BIG_WRITE_INSTANT : JE_BIG_WRITE,
             sizeof(journal_entry_big_write) + clean_entry_bitmap_size
@@ -469,10 +458,7 @@ resume_2:
         memcpy((void*)(je+1), (clean_entry_bitmap_size > sizeof(void*) ? dirty_it->second.bitmap : &dirty_it->second.bitmap), clean_entry_bitmap_size);
         je->crc32 = je_crc32((journal_entry*)je);
         journal.crc32_last = je->crc32;
-        prepare_journal_sector_write(journal, journal.cur_sector, sqe,
-            [this, op](ring_data_t *data) { handle_write_event(data, op); });
-        PRIV(op)->min_flushed_journal_sector = PRIV(op)->max_flushed_journal_sector = 1 + journal.cur_sector;
-        PRIV(op)->pending_ops = 1;
+        prepare_journal_sector_write(journal.cur_sector, op);
         PRIV(op)->op_state = 3;
         return 1;
     }
@@ -587,6 +573,7 @@ void blockstore_impl_t::handle_write_event(ring_data_t *data, blockstore_op_t *o
         );
     }
     PRIV(op)->pending_ops--;
+    assert(PRIV(op)->pending_ops >= 0);
     if (PRIV(op)->pending_ops == 0)
     {
         release_journal_sectors(op);
@@ -604,7 +591,6 @@ void blockstore_impl_t::release_journal_sectors(blockstore_op_t *op)
         uint64_t s = PRIV(op)->min_flushed_journal_sector;
         while (1)
         {
-            journal.sector_info[s-1].flush_count--;
             if (s != (1+journal.cur_sector) && journal.sector_info[s-1].flush_count == 0)
             {
                 // We know for sure that we won't write into this sector anymore
@@ -643,24 +629,24 @@ int blockstore_impl_t::dequeue_del(blockstore_op_t *op)
     {
         return 0;
     }
-    write_iodepth++;
-    io_uring_sqe *sqe = NULL;
-    if (immediate_commit != IMMEDIATE_NONE ||
-        (journal_block_size - journal.in_sector_pos) < sizeof(journal_entry_del) &&
-        journal.sector_info[journal.cur_sector].dirty)
+    // Write current journal sector only if it's dirty and full, or in the immediate_commit mode
+    BS_SUBMIT_CHECK_SQES(
+        (immediate_commit != IMMEDIATE_NONE ||
+            (journal_block_size - journal.in_sector_pos) < sizeof(journal_entry_del) &&
+            journal.sector_info[journal.cur_sector].dirty) ? 1 : 0
+    );
+    if (write_iodepth >= max_write_iodepth)
     {
-        // Write current journal sector only if it's dirty and full, or in the immediate_commit mode
-        BS_SUBMIT_GET_SQE_DECL(sqe);
+        return 0;
     }
-    auto cb = [this, op](ring_data_t *data) { handle_write_event(data, op); };
+    write_iodepth++;
     // Prepare journal sector write
     if (immediate_commit == IMMEDIATE_NONE)
     {
-        if (sqe)
+        if ((journal_block_size - journal.in_sector_pos) < sizeof(journal_entry_del) &&
+            journal.sector_info[journal.cur_sector].dirty)
         {
-            prepare_journal_sector_write(journal, journal.cur_sector, sqe, cb);
-            PRIV(op)->min_flushed_journal_sector = PRIV(op)->max_flushed_journal_sector = 1 + journal.cur_sector;
-            PRIV(op)->pending_ops++;
+            prepare_journal_sector_write(journal.cur_sector, op);
         }
         else
         {
@@ -687,9 +673,7 @@ int blockstore_impl_t::dequeue_del(blockstore_op_t *op)
     dirty_it->second.state = BS_ST_DELETE | BS_ST_SUBMITTED;
     if (immediate_commit != IMMEDIATE_NONE)
     {
-        prepare_journal_sector_write(journal, journal.cur_sector, sqe, cb);
-        PRIV(op)->min_flushed_journal_sector = PRIV(op)->max_flushed_journal_sector = 1 + journal.cur_sector;
-        PRIV(op)->pending_ops++;
+        prepare_journal_sector_write(journal.cur_sector, op);
     }
     if (!PRIV(op)->pending_ops)
     {

src/cli.cpp

@@ -57,6 +57,7 @@ json11::Json::object cli_tool_t::parse_args(int narg, const char *args[])
             const char *opt = args[i]+2;
             cfg[opt] = i == narg-1 || !strcmp(opt, "json") || !strcmp(opt, "wait-list") ||
                 !strcmp(opt, "long") || !strcmp(opt, "del") || !strcmp(opt, "no-color") ||
+                !strcmp(opt, "readonly") || !strcmp(opt, "readwrite") ||
                 !strcmp(opt, "force") || !strcmp(opt, "reverse") ||
                 !strcmp(opt, "writers-stopped") && strcmp("1", args[i+1]) != 0
                 ? "1" : args[++i];
@@ -69,7 +70,7 @@ json11::Json::object cli_tool_t::parse_args(int narg, const char *args[])
     if (!cmd.size())
     {
         std::string exe(exe_name);
-        if (exe.substr(exe.size()-11) == "vitastor-rm")
+        if (exe.size() >= 11 && exe.substr(exe.size()-11) == "vitastor-rm")
         {
             cmd.push_back("rm-data");
         }
@@ -85,8 +86,11 @@ void cli_tool_t::help()
         "(c) Vitaliy Filippov, 2019+ (VNPL-1.1)\n"
         "\n"
         "USAGE:\n"
-        "%s ls [-l] [-p POOL] [--sort FIELD] [-r] [-n N] [<name> ...]\n"
-        "  List images (only specified if <name> passed).\n"
+        "%s df\n"
+        "  Show pool space statistics\n"
+        "\n"
+        "%s ls [-l] [-p POOL] [--sort FIELD] [-r] [-n N] [<glob> ...]\n"
+        "  List images (only matching <glob> patterns if passed).\n"
         "  -p|--pool POOL  Filter images by pool ID or name\n"
         "  -l|--long       Also report allocated size and I/O statistics\n"
         "  --del           Also include delete operation statistics\n"
@@ -103,8 +107,8 @@ void cli_tool_t::help()
         "%s snap-create [-p|--pool <id|name>] <image>@<snapshot>\n"
         "  Create a snapshot of image <name>. May be used live if only a single writer is active.\n"
         "\n"
-        "%s modify <name> [-s|--size <size>] [--readonly | --readwrite] [-f|--force]\n"
-        "  Resize image or change its readonly status. Images with children can't be made read-write.\n"
+        "%s modify <name> [--rename <new-name>] [--resize <size>] [--readonly | --readwrite] [-f|--force]\n"
+        "  Rename, resize image or change its readonly status. Images with children can't be made read-write.\n"
         "  If the new size is smaller than the old size, extra data will be purged.\n"
         "  You should resize file system in the image, if present, before shrinking it.\n"
         "  -f|--force  Proceed with shrinking or setting readwrite flag even if the image has children.\n"
@@ -130,6 +134,18 @@ void cli_tool_t::help()
         "  <to> must be a child of <from> and <target> may be one of the layers between\n"
         "  <from> and <to>, including <from> and <to>.\n"
         "\n"
+        "%s alloc-osd\n"
+        "  Allocate a new OSD number and reserve it by creating empty /osd/stats/<n> key.\n"
+        "%s simple-offsets <device>\n"
+        "  Calculate offsets for simple&stupid (no superblock) OSD deployment. Options:\n"
+        "  --object_size 128k       Set blockstore block size\n"
+        "  --bitmap_granularity 4k  Set bitmap granularity\n"
+        "  --journal_size 16M       Set journal size\n"
+        "  --device_block_size 4k   Set device block size\n"
+        "  --journal_offset 0       Set journal offset\n"
+        "  --device_size 0          Set device size\n"
+        "  --format text            Result format: json, options, env, or text\n"
+        "\n"
         "GLOBAL OPTIONS:\n"
         "  --etcd_address <etcd_address>\n"
         "  --iodepth N         Send N operations in parallel to each OSD when possible (default 32)\n"
@@ -139,7 +155,8 @@ void cli_tool_t::help()
         "  --no-color          Disable colored output\n"
         "  --json              JSON output\n"
         ,
-        exe_name, exe_name, exe_name, exe_name, exe_name, exe_name, exe_name, exe_name, exe_name
+        exe_name, exe_name, exe_name, exe_name, exe_name, exe_name,
+        exe_name, exe_name, exe_name, exe_name, exe_name, exe_name
     );
     exit(0);
 }
@@ -160,7 +177,7 @@ void cli_tool_t::change_parent(inode_t cur, inode_t new_parent)
     new_cfg.parent_id = new_parent;
     json11::Json::object cur_cfg_json = cli->st_cli.serialize_inode_cfg(&new_cfg);
     waiting++;
-    cli->st_cli.etcd_txn(json11::Json::object {
+    cli->st_cli.etcd_txn_slow(json11::Json::object {
         { "compare", json11::Json::array {
             json11::Json::object {
                 { "target", "MOD" },
@@ -177,7 +194,7 @@ void cli_tool_t::change_parent(inode_t cur, inode_t new_parent)
                 } }
             },
         } },
-    }, ETCD_SLOW_TIMEOUT, [this, new_parent, cur, cur_name](std::string err, json11::Json res)
+    }, [this, new_parent, cur, cur_name](std::string err, json11::Json res)
     {
         if (err != "")
         {
@@ -212,6 +229,22 @@ void cli_tool_t::change_parent(inode_t cur, inode_t new_parent)
     });
 }
 
+void cli_tool_t::etcd_txn(json11::Json txn)
+{
+    waiting++;
+    cli->st_cli.etcd_txn_slow(txn, [this](std::string err, json11::Json res)
+    {
+        waiting--;
+        if (err != "")
+        {
+            fprintf(stderr, "Error reading from etcd: %s\n", err.c_str());
+            exit(1);
+        }
+        etcd_result = res;
+        ringloop->wakeup();
+    });
+}
+
 inode_config_t* cli_tool_t::get_inode_cfg(const std::string & name)
 {
     for (auto & ic: cli->st_cli.inode_config)
@@ -233,6 +266,11 @@ void cli_tool_t::run(json11::Json cfg)
         fprintf(stderr, "command is missing\n");
         exit(1);
     }
+    else if (cmd[0] == "df")
+    {
+        // Show pool space stats
+        action_cb = start_df(cfg);
+    }
     else if (cmd[0] == "ls")
     {
         // List images
@@ -268,11 +306,25 @@ void cli_tool_t::run(json11::Json cfg)
         // Remove multiple snapshots and rebase their children
         action_cb = start_snap_rm(cfg);
     }
+    else if (cmd[0] == "alloc-osd")
+    {
+        // Allocate a new OSD number
+        action_cb = start_alloc_osd(cfg);
+    }
+    else if (cmd[0] == "simple-offsets")
+    {
+        // Calculate offsets for simple & stupid OSD deployment without superblock
+        action_cb = simple_offsets(cfg);
+    }
     else
     {
         fprintf(stderr, "unknown command: %s\n", cmd[0].string_value().c_str());
         exit(1);
     }
+    if (action_cb == NULL)
+    {
+        return;
+    }
     color = !cfg["no-color"].bool_value();
     json_output = cfg["json"].bool_value();
     iodepth = cfg["iodepth"].uint64_value();
@@ -313,6 +365,13 @@ void cli_tool_t::run(json11::Json cfg)
         if (action_cb != NULL)
             ringloop->wait();
     }
+    // Destroy the client
+    delete cli;
+    delete epmgr;
+    delete ringloop;
+    cli = NULL;
+    epmgr = NULL;
+    ringloop = NULL;
 }
 
 int main(int narg, const char *args[])
@@ -322,5 +381,6 @@ int main(int narg, const char *args[])
     exe_name = args[0];
     cli_tool_t *p = new cli_tool_t();
     p->run(cli_tool_t::parse_args(narg, args));
+    delete p;
     return 0;
 }

src/cli.h

@@ -34,6 +34,7 @@ public:
     cluster_client_t *cli = NULL;
 
     int waiting = 0;
+    json11::Json etcd_result;
     ring_consumer_t consumer;
     std::function<bool(void)> action_cb;
 
@@ -50,11 +51,28 @@ public:
     friend struct snap_flattener_t;
     friend struct snap_remover_t;
 
-    std::function<bool(void)> start_ls(json11::Json cfg);
-    std::function<bool(void)> start_create(json11::Json cfg);
-    std::function<bool(void)> start_modify(json11::Json cfg);
+    std::function<bool(void)> start_df(json11::Json);
+    std::function<bool(void)> start_ls(json11::Json);
+    std::function<bool(void)> start_create(json11::Json);
+    std::function<bool(void)> start_modify(json11::Json);
     std::function<bool(void)> start_rm(json11::Json);
     std::function<bool(void)> start_merge(json11::Json);
     std::function<bool(void)> start_flatten(json11::Json);
     std::function<bool(void)> start_snap_rm(json11::Json);
+    std::function<bool(void)> start_alloc_osd(json11::Json cfg, uint64_t *out = NULL);
+    std::function<bool(void)> simple_offsets(json11::Json cfg);
+
+    void etcd_txn(json11::Json txn);
 };
+
+uint64_t parse_size(std::string size_str);
+
+std::string print_table(json11::Json items, json11::Json header, bool use_esc);
+
+std::string format_size(uint64_t size);
+
+std::string format_lat(uint64_t lat);
+
+std::string format_q(double depth);
+
+bool stupid_glob(const std::string str, const std::string glob);

src/cli_alloc_osd.cpp

@@ -0,0 +1,124 @@
+// Copyright (c) Vitaliy Filippov, 2019+
+// License: VNPL-1.1 (see README.md for details)
+
+#include <ctype.h>
+#include "cli.h"
+#include "cluster_client.h"
+#include "base64.h"
+
+#include <algorithm>
+
+// Safely allocate an OSD number
+struct alloc_osd_t
+{
+    cli_tool_t *parent;
+
+    uint64_t new_id = 1;
+
+    int state = 0;
+
+    bool is_done()
+    {
+        return state == 100;
+    }
+
+    void loop()
+    {
+        if (state == 1)
+            goto resume_1;
+        do
+        {
+            parent->etcd_txn(json11::Json::object {
+                { "compare", json11::Json::array {
+                    json11::Json::object {
+                        { "target", "VERSION" },
+                        { "version", 0 },
+                        { "key", base64_encode(
+                            parent->cli->st_cli.etcd_prefix+"/osd/stats/"+std::to_string(new_id)
+                        ) },
+                    },
+                } },
+                { "success", json11::Json::array {
+                    json11::Json::object {
+                        { "request_put", json11::Json::object {
+                            { "key", base64_encode(
+                                parent->cli->st_cli.etcd_prefix+"/osd/stats/"+std::to_string(new_id)
+                            ) },
+                            { "value", base64_encode("{}") },
+                        } },
+                    },
+                } },
+                { "failure", json11::Json::array {
+                    json11::Json::object {
+                        { "request_range", json11::Json::object {
+                            { "key", base64_encode(parent->cli->st_cli.etcd_prefix+"/osd/stats/") },
+                            { "range_end", base64_encode(parent->cli->st_cli.etcd_prefix+"/osd/stats0") },
+                            { "keys_only", true },
+                        } },
+                    },
+                } },
+            });
+        resume_1:
+            state = 1;
+            if (parent->waiting > 0)
+                return;
+            if (!parent->etcd_result["succeeded"].bool_value())
+            {
+                std::vector<osd_num_t> used;
+                for (auto kv: parent->etcd_result["responses"][0]["response_range"]["kvs"].array_items())
+                {
+                    std::string key = base64_decode(kv["key"].string_value());
+                    osd_num_t cur_osd;
+                    char null_byte = 0;
+                    sscanf(key.c_str() + parent->cli->st_cli.etcd_prefix.length(), "/osd/stats/%lu%c", &cur_osd, &null_byte);
+                    if (!cur_osd || null_byte != 0)
+                    {
+                        fprintf(stderr, "Invalid key in etcd: %s\n", key.c_str());
+                        continue;
+                    }
+                    used.push_back(cur_osd);
+                }
+                std::sort(used.begin(), used.end());
+                if (used[used.size()-1] == used.size())
+                {
+                    new_id = used.size()+1;
+                }
+                else
+                {
+                    int s = 0, e = used.size();
+                    while (e > s+1)
+                    {
+                        int c = (s+e)/2;
+                        if (used[c] == c+1)
+                            s = c;
+                        else
+                            e = c;
+                    }
+                    new_id = used[e-1]+1;
+                }
+            }
+        } while (!parent->etcd_result["succeeded"].bool_value());
+        state = 100;
+    }
+};
+
+std::function<bool(void)> cli_tool_t::start_alloc_osd(json11::Json cfg, uint64_t *out)
+{
+    json11::Json::array cmd = cfg["command"].array_items();
+    auto alloc_osd = new alloc_osd_t();
+    alloc_osd->parent = this;
+    return [alloc_osd, out]()
+    {
+        alloc_osd->loop();
+        if (alloc_osd->is_done())
+        {
+            if (out)
+                *out = alloc_osd->new_id;
+            else if (alloc_osd->new_id)
+                printf("%lu\n", alloc_osd->new_id);
+            delete alloc_osd;
+            return true;
+        }
+        return false;
+    };
+}

src/cli_create.cpp

@@ -31,7 +31,6 @@ struct image_creator_t
     inode_t new_parent_id = 0;
     inode_t new_id = 0, old_id = 0;
     uint64_t max_id_mod_rev = 0, cfg_mod_rev = 0, idx_mod_rev = 0;
-    json11::Json result;
 
     int state = 0;
 
@@ -49,7 +48,8 @@ struct image_creator_t
             auto & pools = parent->cli->st_cli.pool_config;
             if (pools.find(new_pool_id) == pools.end())
             {
-                new_pool_id = 0;
+                fprintf(stderr, "Pool %u does not exist\n", new_pool_id);
+                exit(1);
             }
         }
         else if (new_pool_name != "")
@@ -62,24 +62,17 @@ struct image_creator_t
                     break;
                 }
             }
+            if (!new_pool_id)
+            {
+                fprintf(stderr, "Pool %s does not exist\n", new_pool_name.c_str());
+                exit(1);
+            }
         }
         else if (parent->cli->st_cli.pool_config.size() == 1)
         {
             auto it = parent->cli->st_cli.pool_config.begin();
             new_pool_id = it->first;
         }
-        if (!new_pool_id)
-        {
-            if (new_pool_name == "")
-            {
-                fprintf(stderr, "Pool name or ID is missing\n");
-            }
-            else
-            {
-                fprintf(stderr, "Pool %s does not exist\n", new_pool_name.c_str());
-            }
-            exit(1);
-        }
         state = 1;
     resume_1:
         if (new_snap == "")
@@ -101,29 +94,56 @@ struct image_creator_t
                 fprintf(stderr, "Image %s already exists\n", image_name.c_str());
                 exit(1);
             }
+            if (ic.second.name == new_parent)
+            {
+                new_parent_id = ic.second.num;
+                if (!new_pool_id)
+                {
+                    new_pool_id = INODE_POOL(ic.second.num);
+                }
+                if (!size)
+                {
+                    size = ic.second.size;
+                }
+            }
+        }
+        if (new_parent != "" && !new_parent_id)
+        {
+            fprintf(stderr, "Parent image not found\n");
+            exit(1);
+        }
+        if (!new_pool_id)
+        {
+            fprintf(stderr, "Pool name or ID is missing\n");
+            exit(1);
+        }
+        if (!size)
+        {
+            fprintf(stderr, "Image size is missing\n");
+            exit(1);
         }
         do
         {
-            etcd_txn(json11::Json::object {
+            parent->etcd_txn(json11::Json::object {
                 { "success", json11::Json::array { get_next_id() } }
             });
             state = 2;
 resume_2:
             if (parent->waiting > 0)
                 return;
-            extract_next_id(result["responses"][0]);
+            extract_next_id(parent->etcd_result["responses"][0]);
             attempt_create();
             state = 3;
 resume_3:
             if (parent->waiting > 0)
                 return;
-            if (!result["succeeded"].bool_value() &&
-                result["responses"][0]["response_range"]["kvs"].array_items().size() > 0)
+            if (!parent->etcd_result["succeeded"].bool_value() &&
+                parent->etcd_result["responses"][0]["response_range"]["kvs"].array_items().size() > 0)
             {
                 fprintf(stderr, "Image %s already exists\n", image_name.c_str());
                 exit(1);
             }
-        } while (!result["succeeded"].bool_value());
+        } while (!parent->etcd_result["succeeded"].bool_value());
         if (parent->progress)
         {
             printf("Image %s created\n", image_name.c_str());
@@ -147,6 +167,11 @@ resume_3:
                 exit(1);
             }
         }
+        if (new_parent != "")
+        {
+            fprintf(stderr, "--parent can't be used with snapshots\n");
+            exit(1);
+        }
         do
         {
             // In addition to next_id, get: size, old_id, old_pool_id, new_parent, cfg_mod_rev, idx_mod_rev
@@ -160,18 +185,23 @@ resume_3:
                 fprintf(stderr, "Image %s does not exist\n", image_name.c_str());
                 exit(1);
             }
+            if (!new_pool_id)
+            {
+                // Create snapshot in the same pool by default
+                new_pool_id = old_pool_id;
+            }
             attempt_create();
             state = 4;
 resume_4:
             if (parent->waiting > 0)
                 return;
-            if (!result["succeeded"].bool_value() &&
-                result["responses"][0]["response_range"]["kvs"].array_items().size() > 0)
+            if (!parent->etcd_result["succeeded"].bool_value() &&
+                parent->etcd_result["responses"][0]["response_range"]["kvs"].array_items().size() > 0)
             {
                 fprintf(stderr, "Snapshot %s@%s already exists\n", image_name.c_str(), new_snap.c_str());
                 exit(1);
             }
-        } while (!result["succeeded"].bool_value());
+        } while (!parent->etcd_result["succeeded"].bool_value());
         if (parent->progress)
         {
             printf("Snapshot %s@%s created\n", image_name.c_str(), new_snap.c_str());
@@ -215,7 +245,7 @@ resume_4:
             goto resume_2;
         else if (state == 3)
             goto resume_3;
-        etcd_txn(json11::Json::object { { "success", json11::Json::array {
+        parent->etcd_txn(json11::Json::object { { "success", json11::Json::array {
             get_next_id(),
             json11::Json::object {
                 { "request_range", json11::Json::object {
@@ -229,11 +259,11 @@ resume_4:
 resume_2:
         if (parent->waiting > 0)
             return;
-        extract_next_id(result["responses"][0]);
+        extract_next_id(parent->etcd_result["responses"][0]);
         old_id = 0;
         old_pool_id = 0;
         cfg_mod_rev = idx_mod_rev = 0;
-        if (result["responses"][1]["response_range"]["kvs"].array_items().size() == 0)
+        if (parent->etcd_result["responses"][1]["response_range"]["kvs"].array_items().size() == 0)
         {
             for (auto & ic: parent->cli->st_cli.inode_config)
             {
@@ -252,7 +282,7 @@ resume_2:
         {
             // FIXME: Parse kvs in etcd_state_client automatically
             {
-                auto kv = parent->cli->st_cli.parse_etcd_kv(result["responses"][1]["response_range"]["kvs"][0]);
+                auto kv = parent->cli->st_cli.parse_etcd_kv(parent->etcd_result["responses"][1]["response_range"]["kvs"][0]);
                 old_id = INODE_NO_POOL(kv.value["id"].uint64_value());
                 old_pool_id = (pool_id_t)kv.value["pool_id"].uint64_value();
                 idx_mod_rev = kv.mod_revision;
@@ -262,7 +292,7 @@ resume_2:
                     exit(1);
                 }
             }
-            etcd_txn(json11::Json::object {
+            parent->etcd_txn(json11::Json::object {
                 { "success", json11::Json::array {
                     json11::Json::object {
                         { "request_range", json11::Json::object {
@@ -279,7 +309,7 @@ resume_3:
             if (parent->waiting > 0)
                 return;
             {
-                auto kv = parent->cli->st_cli.parse_etcd_kv(result["responses"][0]["response_range"]["kvs"][0]);
+                auto kv = parent->cli->st_cli.parse_etcd_kv(parent->etcd_result["responses"][0]["response_range"]["kvs"][0]);
                 size = kv.value["size"].uint64_value();
                 new_parent_id = kv.value["parent_id"].uint64_value();
                 uint64_t parent_pool_id = kv.value["parent_pool_id"].uint64_value();
@@ -408,30 +438,43 @@ resume_3:
                 } },
             });
         };
-        etcd_txn(json11::Json::object {
+        parent->etcd_txn(json11::Json::object {
             { "compare", checks },
             { "success", success },
             { "failure", failure },
         });
     }
-
-    void etcd_txn(json11::Json txn)
-    {
-        parent->waiting++;
-        parent->cli->st_cli.etcd_txn(txn, ETCD_SLOW_TIMEOUT, [this](std::string err, json11::Json res)
-        {
-            parent->waiting--;
-            if (err != "")
-            {
-                fprintf(stderr, "Error reading from etcd: %s\n", err.c_str());
-                exit(1);
-            }
-            this->result = res;
-            parent->ringloop->wakeup();
-        });
-    }
 };
 
+uint64_t parse_size(std::string size_str)
+{
+    if (!size_str.length())
+    {
+        return 0;
+    }
+    uint64_t mul = 1;
+    char type_char = tolower(size_str[size_str.length()-1]);
+    if (type_char == 'k' || type_char == 'm' || type_char == 'g' || type_char == 't')
+    {
+        if (type_char == 'k')
+            mul = 1l<<10;
+        else if (type_char == 'm')
+            mul = 1l<<20;
+        else if (type_char == 'g')
+            mul = 1l<<30;
+        else /*if (type_char == 't')*/
+            mul = 1l<<40;
+        size_str = size_str.substr(0, size_str.length()-1);
+    }
+    uint64_t size = json11::Json(size_str).uint64_value() * mul;
+    if (size == 0 && size_str != "0" && (size_str != "" || mul != 1))
+    {
+        fprintf(stderr, "Invalid syntax for size: %s\n", size_str.c_str());
+        exit(1);
+    }
+    return size;
+}
+
 std::function<bool(void)> cli_tool_t::start_create(json11::Json cfg)
 {
     json11::Json::array cmd = cfg["command"].array_items();
@@ -458,33 +501,12 @@ std::function<bool(void)> cli_tool_t::start_create(json11::Json cfg)
     image_creator->new_parent = cfg["parent"].string_value();
     if (cfg["size"].string_value() != "")
     {
-        std::string size_str = cfg["size"].string_value();
-        uint64_t mul = 1;
-        char type_char = tolower(size_str[size_str.length()-1]);
-        if (type_char == 'k' || type_char == 'm' || type_char == 'g' || type_char == 't')
+        image_creator->size = parse_size(cfg["size"].string_value());
+        if (image_creator->size % 4096)
         {
-            if (type_char == 'k')
-                mul = 1l<<10;
-            else if (type_char == 'm')
-                mul = 1l<<20;
-            else if (type_char == 'g')
-                mul = 1l<<30;
-            else /*if (type_char == 't')*/
-                mul = 1l<<40;
-            size_str = size_str.substr(0, size_str.length()-1);
-        }
-        uint64_t size = json11::Json(size_str).uint64_value() * mul;
-        if (size == 0)
-        {
-            fprintf(stderr, "Invalid syntax for size: %s\n", cfg["size"].string_value().c_str());
+            fprintf(stderr, "Size should be a multiple of 4096\n");
             exit(1);
         }
-        if (size % 4096)
-        {
-            fprintf(stderr, "Image size should be a multiple of 4096\n");
-            exit(1);
-        }
-        image_creator->size = size;
         if (image_creator->new_snap != "")
         {
             fprintf(stderr, "--size can't be specified for snapshots\n");

src/cli_df.cpp

@@ -0,0 +1,229 @@
+// Copyright (c) Vitaliy Filippov, 2019+
+// License: VNPL-1.1 (see README.md for details)
+
+#include "cli.h"
+#include "cluster_client.h"
+#include "base64.h"
+
+// List pools with space statistics
+struct pool_lister_t
+{
+    cli_tool_t *parent;
+
+    int state = 0;
+    json11::Json space_info;
+    std::map<pool_id_t, json11::Json::object> pool_stats;
+
+    bool is_done()
+    {
+        return state == 100;
+    }
+
+    void get_stats()
+    {
+        if (state == 1)
+            goto resume_1;
+        // Space statistics - pool/stats/<pool>
+        parent->etcd_txn(json11::Json::object {
+            { "success", json11::Json::array {
+                json11::Json::object {
+                    { "request_range", json11::Json::object {
+                        { "key", base64_encode(
+                            parent->cli->st_cli.etcd_prefix+"/pool/stats/"
+                        ) },
+                        { "range_end", base64_encode(
+                            parent->cli->st_cli.etcd_prefix+"/pool/stats0"
+                        ) },
+                    } },
+                },
+                json11::Json::object {
+                    { "request_range", json11::Json::object {
+                        { "key", base64_encode(
+                            parent->cli->st_cli.etcd_prefix+"/osd/stats/"
+                        ) },
+                        { "range_end", base64_encode(
+                            parent->cli->st_cli.etcd_prefix+"/osd/stats0"
+                        ) },
+                    } },
+                },
+            } },
+        });
+        state = 1;
+resume_1:
+        if (parent->waiting > 0)
+            return;
+        space_info = parent->etcd_result;
+        std::map<pool_id_t, uint64_t> osd_free;
+        for (auto & kv_item: space_info["responses"][0]["response_range"]["kvs"].array_items())
+        {
+            auto kv = parent->cli->st_cli.parse_etcd_kv(kv_item);
+            // pool ID
+            pool_id_t pool_id;
+            char null_byte = 0;
+            sscanf(kv.key.substr(parent->cli->st_cli.etcd_prefix.length()).c_str(), "/pool/stats/%u%c", &pool_id, &null_byte);
+            if (!pool_id || pool_id >= POOL_ID_MAX || null_byte != 0)
+            {
+                fprintf(stderr, "Invalid key in etcd: %s\n", kv.key.c_str());
+                continue;
+            }
+            // pool/stats/<N>
+            pool_stats[pool_id] = kv.value.object_items();
+        }
+        for (auto & kv_item: space_info["responses"][1]["response_range"]["kvs"].array_items())
+        {
+            auto kv = parent->cli->st_cli.parse_etcd_kv(kv_item);
+            // osd ID
+            osd_num_t osd_num;
+            char null_byte = 0;
+            sscanf(kv.key.substr(parent->cli->st_cli.etcd_prefix.length()).c_str(), "/osd/stats/%lu%c", &osd_num, &null_byte);
+            if (!osd_num || osd_num >= POOL_ID_MAX || null_byte != 0)
+            {
+                fprintf(stderr, "Invalid key in etcd: %s\n", kv.key.c_str());
+                continue;
+            }
+            // osd/stats/<N>::free
+            osd_free[osd_num] = kv.value["free"].uint64_value();
+        }
+        // Calculate max_avail for each pool
+        for (auto & pp: parent->cli->st_cli.pool_config)
+        {
+            auto & pool_cfg = pp.second;
+            uint64_t pool_avail = UINT64_MAX;
+            std::map<osd_num_t, uint64_t> pg_per_osd;
+            for (auto & pgp: pool_cfg.pg_config)
+            {
+                for (auto pg_osd: pgp.second.target_set)
+                {
+                    if (pg_osd != 0)
+                    {
+                        pg_per_osd[pg_osd]++;
+                    }
+                }
+            }
+            for (auto pg_per_pair: pg_per_osd)
+            {
+                uint64_t pg_free = osd_free[pg_per_pair.first] * pool_cfg.pg_count / pg_per_pair.second;
+                if (pool_avail > pg_free)
+                {
+                    pool_avail = pg_free;
+                }
+            }
+            if (pool_avail == UINT64_MAX)
+            {
+                pool_avail = 0;
+            }
+            if (pool_cfg.scheme != POOL_SCHEME_REPLICATED)
+            {
+                uint64_t pg_real_size = pool_stats[pool_cfg.id]["pg_real_size"].uint64_value();
+                pool_avail = pg_real_size > 0 ? pool_avail * (pool_cfg.pg_size - pool_cfg.parity_chunks) / pg_real_size : 0;
+            }
+            pool_stats[pool_cfg.id] = json11::Json::object {
+                { "name", pool_cfg.name },
+                { "pg_count", pool_cfg.pg_count },
+                { "scheme", pool_cfg.scheme == POOL_SCHEME_REPLICATED ? "replicated" : "jerasure" },
+                { "scheme_name", pool_cfg.scheme == POOL_SCHEME_REPLICATED
+                    ? std::to_string(pool_cfg.pg_size)+"/"+std::to_string(pool_cfg.pg_minsize)
+                    : "EC "+std::to_string(pool_cfg.pg_size-pool_cfg.parity_chunks)+"+"+std::to_string(pool_cfg.parity_chunks) },
+                { "used_raw", (uint64_t)(pool_stats[pool_cfg.id]["used_raw_tb"].number_value() * (1l<<40)) },
+                { "total_raw", (uint64_t)(pool_stats[pool_cfg.id]["total_raw_tb"].number_value() * (1l<<40)) },
+                { "max_available", pool_avail },
+                { "raw_to_usable", pool_stats[pool_cfg.id]["raw_to_usable"].number_value() },
+                { "space_efficiency", pool_stats[pool_cfg.id]["space_efficiency"].number_value() },
+                { "pg_real_size", pool_stats[pool_cfg.id]["pg_real_size"].uint64_value() },
+                { "failure_domain", pool_cfg.failure_domain },
+            };
+        }
+    }
+
+    json11::Json::array to_list()
+    {
+        json11::Json::array list;
+        for (auto & kv: pool_stats)
+        {
+            list.push_back(kv.second);
+        }
+        return list;
+    }
+
+    void loop()
+    {
+        get_stats();
+        if (parent->waiting > 0)
+            return;
+        if (parent->json_output)
+        {
+            // JSON output
+            printf("%s\n", json11::Json(to_list()).dump().c_str());
+            state = 100;
+            return;
+        }
+        // Table output: name, scheme_name, pg_count, total, used, max_avail, used%, efficiency
+        json11::Json::array cols;
+        cols.push_back(json11::Json::object{
+            { "key", "name" },
+            { "title", "NAME" },
+        });
+        cols.push_back(json11::Json::object{
+            { "key", "scheme_name" },
+            { "title", "SCHEME" },
+        });
+        cols.push_back(json11::Json::object{
+            { "key", "pg_count" },
+            { "title", "PGS" },
+        });
+        cols.push_back(json11::Json::object{
+            { "key", "total_fmt" },
+            { "title", "TOTAL" },
+        });
+        cols.push_back(json11::Json::object{
+            { "key", "used_fmt" },
+            { "title", "USED" },
+        });
+        cols.push_back(json11::Json::object{
+            { "key", "max_avail_fmt" },
+            { "title", "AVAILABLE" },
+        });
+        cols.push_back(json11::Json::object{
+            { "key", "used_pct" },
+            { "title", "USED%" },
+        });
+        cols.push_back(json11::Json::object{
+            { "key", "eff_fmt" },
+            { "title", "EFFICIENCY" },
+        });
+        json11::Json::array list;
+        for (auto & kv: pool_stats)
+        {
+            double raw_to = kv.second["raw_to_usable"].number_value();
+            if (raw_to < 0.000001 && raw_to > -0.000001)
+                raw_to = 1;
+            kv.second["total_fmt"] = format_size(kv.second["total_raw"].uint64_value() / raw_to);
+            kv.second["used_fmt"] = format_size(kv.second["used_raw"].uint64_value() / raw_to);
+            kv.second["max_avail_fmt"] = format_size(kv.second["max_available"].uint64_value());
+            kv.second["used_pct"] = format_q(kv.second["total_raw"].uint64_value()
+                ? (100 - 100*kv.second["max_available"].uint64_value() *
+                    kv.second["raw_to_usable"].number_value() / kv.second["total_raw"].uint64_value())
+                : 100)+"%";
+            kv.second["eff_fmt"] = format_q(kv.second["space_efficiency"].number_value()*100)+"%";
+        }
+        printf("%s", print_table(to_list(), cols, parent->color).c_str());
+        state = 100;
+    }
+};
+
+std::function<bool(void)> cli_tool_t::start_df(json11::Json cfg)
+{
+    json11::Json::array cmd = cfg["command"].array_items();
+    auto lister = new pool_lister_t();
+    lister->parent = this;
+    return [lister]()
+    {
+        lister->loop();
+        if (lister->is_done())
+        {
+            delete lister;
+            return true;
+        }
+        return false;
+    };
+}

src/cli_flatten.cpp

@@ -3,6 +3,7 @@
 
 #include "cli.h"
 #include "cluster_client.h"
+#include <sys/stat.h>
 
 // Flatten a layer: merge all parents into a layer and break the connection completely
 struct snap_flattener_t

src/cli_ls.cpp

@@ -6,16 +6,6 @@
 #include "cluster_client.h"
 #include "base64.h"
 
-#define MIN(a, b) ((a) < (b) ? (b) : (a))
-
-std::string print_table(json11::Json items, json11::Json header, bool use_esc);
-
-std::string format_size(uint64_t size);
-
-std::string format_lat(uint64_t lat);
-
-std::string format_q(double depth);
-
 // List existing images
 //
 // Again, you can just look into etcd, but this console tool incapsulates it
@@ -94,8 +84,7 @@ struct image_lister_t
         // Space statistics
         // inode/stats/<pool>/<inode>::raw_used divided by pool/stats/<pool>::pg_real_size
         // multiplied by 1 or number of data drives
-        parent->waiting++;
-        parent->cli->st_cli.etcd_txn(json11::Json::object {
+        parent->etcd_txn(json11::Json::object {
             { "success", json11::Json::array {
                 json11::Json::object {
                     { "request_range", json11::Json::object {
@@ -122,21 +111,12 @@ struct image_lister_t
                     } },
                 },
             } },
-        }, ETCD_SLOW_TIMEOUT, [this](std::string err, json11::Json res)
-        {
-            parent->waiting--;
-            if (err != "")
-            {
-                fprintf(stderr, "Error reading from etcd: %s\n", err.c_str());
-                exit(1);
-            }
-            space_info = res;
-            parent->ringloop->wakeup();
         });
         state = 1;
 resume_1:
         if (parent->waiting > 0)
             return;
+        space_info = parent->etcd_result;
         std::map<pool_id_t, uint64_t> pool_pg_real_size;
         for (auto & kv_item: space_info["responses"][0]["response_range"]["kvs"].array_items())
         {
@@ -213,10 +193,21 @@ resume_1:
         json11::Json::array list;
         for (auto & kv: stats)
         {
-            if (!only_names.size() || only_names.find(kv.second["name"].string_value()) != only_names.end())
+            if (!only_names.size())
             {
                 list.push_back(kv.second);
             }
+            else
+            {
+                for (auto glob: only_names)
+                {
+                    if (stupid_glob(kv.second["name"].string_value(), glob))
+                    {
+                        list.push_back(kv.second);
+                        break;
+                    }
+                }
+            }
         }
         if (sort_field == "name" || sort_field == "pool_name")
         {
@@ -355,6 +346,9 @@ resume_1:
                 kv.second["read_bw"] = format_size(kv.second["read_bps"].uint64_value())+"/s";
                 kv.second["write_bw"] = format_size(kv.second["write_bps"].uint64_value())+"/s";
                 kv.second["delete_bw"] = format_size(kv.second["delete_bps"].uint64_value())+"/s";
+                kv.second["read_iops"] = format_q(kv.second["read_iops"].number_value());
+                kv.second["write_iops"] = format_q(kv.second["write_iops"].number_value());
+                kv.second["delete_iops"] = format_q(kv.second["delete_iops"].number_value());
                 kv.second["read_lat_f"] = format_lat(kv.second["read_lat"].uint64_value());
                 kv.second["write_lat_f"] = format_lat(kv.second["write_lat"].uint64_value());
                 kv.second["delete_lat_f"] = format_lat(kv.second["delete_lat"].uint64_value());
@@ -493,6 +487,62 @@ std::string format_q(double depth)
     return std::string(buf);
 }
 
+struct glob_stack_t
+{
+    int glob_pos;
+    int str_pos;
+};
+
+// Yes I know I could do it by translating the pattern to std::regex O:-)
+bool stupid_glob(const std::string str, const std::string glob)
+{
+    std::vector<glob_stack_t> wildcards;
+    int pos = 0, gp = 0;
+    bool m;
+back:
+    while (true)
+    {
+        if (gp >= glob.length())
+        {
+            if (pos >= str.length())
+                return true;
+            m = false;
+        }
+        else if (glob[gp] == '*')
+        {
+            wildcards.push_back((glob_stack_t){ .glob_pos = ++gp, .str_pos = pos });
+            continue;
+        }
+        else if (glob[gp] == '?')
+            m = pos < str.size();
+        else
+        {
+            if (glob[gp] == '\\' && gp < glob.length()-1)
+                gp++;
+            m = pos < str.size() && str[pos] == glob[gp];
+        }
+        if (!m)
+        {
+            while (wildcards.size() > 0)
+            {
+                // Backtrack
+                pos = (++wildcards[wildcards.size()-1].str_pos);
+                if (pos > str.size())
+                    wildcards.pop_back();
+                else
+                {
+                    gp = wildcards[wildcards.size()-1].glob_pos;
+                    goto back;
+                }
+            }
+            return false;
+        }
+        pos++;
+        gp++;
+    }
+    return true;
+}
+
 std::function<bool(void)> cli_tool_t::start_ls(json11::Json cfg)
 {
     json11::Json::array cmd = cfg["command"].array_items();
@@ -505,7 +555,7 @@ std::function<bool(void)> cli_tool_t::start_ls(json11::Json cfg)
     lister->sort_field = cfg["sort"].string_value();
     lister->reverse = cfg["reverse"].bool_value();
     lister->max_count = cfg["count"].uint64_value();
-    for (int i = 0; i < cmd.size(); i++)
+    for (int i = 1; i < cmd.size(); i++)
     {
         lister->only_names.insert(cmd[i].string_value());
     }

src/cli_merge.cpp

@@ -412,7 +412,7 @@ struct snap_merger_t
         uint64_t bitmap_size = target_block_size / gran;
         while (rwo->end < bitmap_size)
         {
-            auto bit = ((*(uint8_t*)(rwo->op.bitmap_buf + (rwo->end >> 3))) & (1 << (rwo->end & 0x7)));
+            auto bit = ((*((uint8_t*)rwo->op.bitmap_buf + (rwo->end >> 3))) & (1 << (rwo->end & 0x7)));
             if (!bit)
             {
                 if (rwo->end > rwo->start)
@@ -459,7 +459,7 @@ struct snap_merger_t
         subop->len = end-start;
         subop->version = version;
         subop->flags = OSD_OP_IGNORE_READONLY;
-        subop->iov.push_back(rwo->buf+start, end-start);
+        subop->iov.push_back((uint8_t*)rwo->buf+start, end-start);
         subop->callback = [this, rwo](cluster_op_t *subop)
         {
             rwo->todo--;
@@ -495,7 +495,7 @@ struct snap_merger_t
         subop->offset = offset;
         subop->len = 0;
         subop->flags = OSD_OP_IGNORE_READONLY;
-        subop->callback = [this](cluster_op_t *subop)
+        subop->callback = [](cluster_op_t *subop)
         {
             if (subop->retval != 0)
             {
@@ -519,10 +519,10 @@ struct snap_merger_t
                 deleted_unsynced++;
                 if (deleted_unsynced >= fsync_interval)
                 {
-                    uint64_t from = last_fsync_offset, to = last_written_offset;
+                    uint64_t to = last_written_offset;
                     cluster_op_t *subop = new cluster_op_t;
                     subop->opcode = OSD_OP_SYNC;
-                    subop->callback = [this, from, to](cluster_op_t *subop)
+                    subop->callback = [this, to](cluster_op_t *subop)
                     {
                         delete subop;
                         // We can now delete source data between <from> and <to>

src/cli_modify.cpp

@@ -5,12 +5,13 @@
 #include "cluster_client.h"
 #include "base64.h"
 
-// Resize image (purging extra data on shrink) or change its readonly status
+// Rename, resize image (and purge extra data on shrink) or change its readonly status
 struct image_changer_t
 {
     cli_tool_t *parent;
 
     std::string image_name;
+    std::string new_name;
     uint64_t new_size = 0;
     bool set_readonly = false, set_readwrite = false, force = false;
     // interval between fsyncs
@@ -18,7 +19,7 @@ struct image_changer_t
 
     uint64_t inode_num = 0;
     inode_config_t cfg;
-    std::string cur_cfg_key;
+    json11::Json::array checks, success;
     bool has_children = false;
 
     int state = 0;
@@ -43,6 +44,11 @@ struct image_changer_t
                 cfg = ic.second;
                 break;
             }
+            if (new_name != "" && ic.second.name == new_name)
+            {
+                fprintf(stderr, "Image %s already exists\n", new_name.c_str());
+                exit(1);
+            }
         }
         if (!inode_num)
         {
@@ -57,14 +63,23 @@ struct image_changer_t
                 break;
             }
         }
+        if ((!set_readwrite || !cfg.readonly) &&
+            (!set_readonly || cfg.readonly) &&
+            (!new_size || cfg.size == new_size) &&
+            (new_name == "" || new_name == image_name))
+        {
+            printf("No change\n");
+            state = 100;
+            return;
+        }
         if (new_size != 0)
         {
             if (cfg.size >= new_size)
             {
-                // Check confirmation if trimming an image with children
+                // Check confirmation when trimming an image with children
                 if (has_children && !force)
                 {
-                    fprintf(stderr, "Image %s has children. Refusing to shrink it without --force", image_name.c_str());
+                    fprintf(stderr, "Image %s has children. Refusing to shrink it without --force\n", image_name.c_str());
                     exit(1);
                 }
                 // Shrink the image first
@@ -91,56 +106,84 @@ resume_1:
         if (set_readwrite)
         {
             cfg.readonly = false;
-            // Check confirmation if trimming an image with children
-            if (!force)
+            // Check confirmation when making an image with children read-write
+            if (has_children && !force)
             {
-                fprintf(stderr, "Image %s has children. Refusing to make it read-write without --force", image_name.c_str());
+                fprintf(stderr, "Image %s has children. Refusing to make it read-write without --force\n", image_name.c_str());
                 exit(1);
             }
         }
-        cur_cfg_key = base64_encode(parent->cli->st_cli.etcd_prefix+
-            "/config/inode/"+std::to_string(INODE_POOL(inode_num))+
-            "/"+std::to_string(INODE_NO_POOL(inode_num)));
-        parent->waiting++;
-        parent->cli->st_cli.etcd_txn(json11::Json::object {
-            { "compare", json11::Json::array {
-                json11::Json::object {
-                    { "target", "MOD" },
-                    { "key", cur_cfg_key },
-                    { "result", "LESS" },
-                    { "mod_revision", cfg.mod_revision+1 },
-                },
-            } },
-            { "success", json11::Json::array {
-                json11::Json::object {
-                    { "request_put", json11::Json::object {
-                        { "key", cur_cfg_key },
-                        { "value", base64_encode(json11::Json(
-                            parent->cli->st_cli.serialize_inode_cfg(&cfg)
-                        ).dump()) },
-                    } }
-                },
-            } },
-        }, ETCD_SLOW_TIMEOUT, [this](std::string err, json11::Json res)
+        if (new_name != "")
         {
-            if (err != "")
-            {
-                fprintf(stderr, "Error changing %s: %s\n", image_name.c_str(), err.c_str());
-                exit(1);
-            }
-            if (!res["succeeded"].bool_value())
-            {
-                fprintf(stderr, "Image %s was modified by someone else, please repeat your request\n", image_name.c_str());
-                exit(1);
-            }
-            parent->waiting--;
-            parent->ringloop->wakeup();
+            cfg.name = new_name;
+        }
+        {
+            std::string cur_cfg_key = base64_encode(parent->cli->st_cli.etcd_prefix+
+                "/config/inode/"+std::to_string(INODE_POOL(inode_num))+
+                "/"+std::to_string(INODE_NO_POOL(inode_num)));
+            checks.push_back(json11::Json::object {
+                { "target", "MOD" },
+                { "key", cur_cfg_key },
+                { "result", "LESS" },
+                { "mod_revision", cfg.mod_revision+1 },
+            });
+            success.push_back(json11::Json::object {
+                { "request_put", json11::Json::object {
+                    { "key", cur_cfg_key },
+                    { "value", base64_encode(json11::Json(
+                        parent->cli->st_cli.serialize_inode_cfg(&cfg)
+                    ).dump()) },
+                } }
+            });
+        }
+        if (new_name != "")
+        {
+            std::string old_idx_key = base64_encode(
+                parent->cli->st_cli.etcd_prefix+"/index/image/"+image_name
+            );
+            std::string new_idx_key = base64_encode(
+                parent->cli->st_cli.etcd_prefix+"/index/image/"+new_name
+            );
+            checks.push_back(json11::Json::object {
+                { "target", "MOD" },
+                { "key", old_idx_key },
+                { "result", "LESS" },
+                { "mod_revision", cfg.mod_revision+1 },
+            });
+            checks.push_back(json11::Json::object {
+                { "target", "VERSION" },
+                { "version", 0 },
+                { "key", new_idx_key },
+            });
+            success.push_back(json11::Json::object {
+                { "request_delete_range", json11::Json::object {
+                    { "key", old_idx_key },
+                } }
+            });
+            success.push_back(json11::Json::object {
+                { "request_put", json11::Json::object {
+                    { "key", new_idx_key },
+                    { "value", base64_encode(json11::Json(json11::Json::object{
+                        { "id", INODE_NO_POOL(inode_num) },
+                        { "pool_id", (uint64_t)INODE_POOL(inode_num) },
+                    }).dump()) },
+                } }
+            });
+        }
+        parent->etcd_txn(json11::Json::object {
+            { "compare", checks },
+            { "success", success },
         });
         state = 2;
 resume_2:
         if (parent->waiting > 0)
             return;
-        printf("Image %s changed\n", image_name.c_str());
+        if (!parent->etcd_result["succeeded"].bool_value())
+        {
+            fprintf(stderr, "Image %s was modified by someone else, please repeat your request\n", image_name.c_str());
+            exit(1);
+        }
+        printf("Image %s modified\n", image_name.c_str());
         state = 100;
     }
 };
@@ -156,7 +199,8 @@ std::function<bool(void)> cli_tool_t::start_modify(json11::Json cfg)
         fprintf(stderr, "Image name is missing\n");
         exit(1);
     }
-    changer->new_size = cfg["size"].uint64_value();
+    changer->new_name = cfg["rename"].string_value();
+    changer->new_size = parse_size(cfg["resize"].string_value());
     if (changer->new_size != 0 && (changer->new_size % 4096))
     {
         fprintf(stderr, "Image size should be a multiple of 4096\n");

src/cli_simple_offsets.cpp

@@ -0,0 +1,144 @@
+// Copyright (c) Vitaliy Filippov, 2019+
+// License: VNPL-1.1 (see README.md for details)
+
+#include <fcntl.h>
+#include <sys/ioctl.h>
+#include <ctype.h>
+#include <unistd.h>
+#include "cli.h"
+#include "cluster_client.h"
+#include "base64.h"
+#include <sys/stat.h>
+
+// Calculate offsets for a block device and print OSD command line parameters
+std::function<bool(void)> cli_tool_t::simple_offsets(json11::Json cfg)
+{
+    std::string device = cfg["command"][1].string_value();
+    uint64_t object_size = parse_size(cfg["object_size"].string_value());
+    uint64_t bitmap_granularity = parse_size(cfg["bitmap_granularity"].string_value());
+    uint64_t journal_size = parse_size(cfg["journal_size"].string_value());
+    uint64_t device_block_size = parse_size(cfg["device_block_size"].string_value());
+    uint64_t journal_offset = parse_size(cfg["journal_offset"].string_value());
+    uint64_t device_size = parse_size(cfg["device_size"].string_value());
+    std::string format = cfg["format"].string_value();
+    if (json_output)
+        format = "json";
+    if (!object_size)
+        object_size = DEFAULT_BLOCK_SIZE;
+    if (!bitmap_granularity)
+        bitmap_granularity = DEFAULT_BITMAP_GRANULARITY;
+    if (!journal_size)
+        journal_size = 16*1024*1024;
+    if (!device_block_size)
+        device_block_size = 4096;
+    uint64_t orig_device_size = device_size;
+    if (!device_size)
+    {
+        struct stat st;
+        if (stat(device.c_str(), &st) < 0)
+        {
+            fprintf(stderr, "Can't stat %s: %s\n", device.c_str(), strerror(errno));
+            exit(1);
+        }
+        if (S_ISBLK(st.st_mode))
+        {
+            int fd = open(device.c_str(), O_DIRECT|O_RDONLY);
+            if (fd < 0 || ioctl(fd, BLKGETSIZE64, &device_size) < 0)
+            {
+                fprintf(stderr, "Failed to get device size for %s: %s\n", device.c_str(), strerror(errno));
+                exit(1);
+            }
+            close(fd);
+            if (st.st_blksize < device_block_size)
+            {
+                fprintf(
+                    stderr, "Warning: %s reports %lu byte blocks, but we use %lu."
+                    " Set --device_block_size=%lu if you're sure it works well with %lu byte blocks.\n",
+                    device.c_str(), st.st_blksize, device_block_size, st.st_blksize, st.st_blksize
+                );
+            }
+        }
+        else if (S_ISREG(st.st_mode))
+        {
+            device_size = st.st_size;
+        }
+        else
+        {
+            fprintf(stderr, "%s is neither a block device nor a regular file\n", device.c_str());
+            exit(1);
+        }
+    }
+    if (!device_size)
+    {
+        fprintf(stderr, "Failed to get device size for %s\n", device.c_str());
+        exit(1);
+    }
+    if (device_block_size < 512 || device_block_size > 1048576 ||
+        device_block_size & (device_block_size-1) != 0)
+    {
+        fprintf(stderr, "Invalid device block size specified: %lu\n", device_block_size);
+        exit(1);
+    }
+    if (object_size < device_block_size || object_size > MAX_BLOCK_SIZE ||
+        object_size & (object_size-1) != 0)
+    {
+        fprintf(stderr, "Invalid object size specified: %lu\n", object_size);
+        exit(1);
+    }
+    if (bitmap_granularity < device_block_size || bitmap_granularity > object_size ||
+        bitmap_granularity & (bitmap_granularity-1) != 0)
+    {
+        fprintf(stderr, "Invalid bitmap granularity specified: %lu\n", bitmap_granularity);
+        exit(1);
+    }
+    journal_offset = ((journal_offset+device_block_size-1)/device_block_size)*device_block_size;
+    uint64_t meta_offset = journal_offset + ((journal_size+device_block_size-1)/device_block_size)*device_block_size;
+    uint64_t entries_per_block = (device_block_size / (24 + 2*object_size/bitmap_granularity/8));
+    uint64_t object_count = ((device_size-meta_offset)/object_size);
+    uint64_t meta_size = (1 + (object_count+entries_per_block-1)/entries_per_block) * device_block_size;
+    uint64_t data_offset = meta_offset + meta_size;
+    if (format == "json")
+    {
+        // JSON
+        printf("%s\n", json11::Json(json11::Json::object {
+            { "meta_block_size", device_block_size },
+            { "journal_block_size", device_block_size },
+            { "data_size", device_size-data_offset },
+            { "data_device", device },
+            { "journal_offset", journal_offset },
+            { "meta_offset", meta_offset },
+            { "data_offset", data_offset },
+        }).dump().c_str());
+    }
+    else if (format == "env")
+    {
+        // Env
+        printf(
+            "meta_block_size=%lu\njournal_block_size=%lu\ndata_size=%lu\n"
+            "data_device=%s\njournal_offset=%lu\nmeta_offset=%lu\ndata_offset=%lu\n",
+            device_block_size, device_block_size, device_size-data_offset,
+            device.c_str(), journal_offset, meta_offset, data_offset
+        );
+    }
+    else
+    {
+        // OSD command-line options
+        if (format != "options")
+        {
+            fprintf(stderr, "Metadata size: %s\nOptions for the OSD:\n", format_size(meta_size).c_str());
+        }
+        if (device_block_size != 4096)
+        {
+            printf("--meta_block_size %lu\n--journal_block_size %lu\n", device_block_size, device_block_size);
+        }
+        if (orig_device_size)
+        {
+            printf("--data_size %lu\n", device_size-data_offset);
+        }
+        printf(
+            "--data_device %s\n--journal_offset %lu\n--meta_offset %lu\n--data_offset %lu\n",
+            device.c_str(), journal_offset, meta_offset, data_offset
+        );
+    }
+    return NULL;
+}

src/cli_snap_rm.cpp

@@ -1,6 +1,7 @@
 // Copyright (c) Vitaliy Filippov, 2019+
 // License: VNPL-1.1 (see README.md for details)
 
+#include <fcntl.h>
 #include "cli.h"
 #include "cluster_client.h"
 #include "base64.h"
@@ -255,9 +256,9 @@ resume_9:
             });
         }
         parent->waiting++;
-        parent->cli->st_cli.etcd_txn(json11::Json::object {
+        parent->cli->st_cli.etcd_txn_slow(json11::Json::object {
             { "success", reads },
-        }, ETCD_SLOW_TIMEOUT, [this](std::string err, json11::Json data)
+        }, [this](std::string err, json11::Json data)
         {
             parent->waiting--;
             if (err != "")
@@ -413,10 +414,10 @@ resume_9:
             }
         }
         parent->waiting++;
-        parent->cli->st_cli.etcd_txn(json11::Json::object {
+        parent->cli->st_cli.etcd_txn_slow(json11::Json::object {
             { "compare", cmp },
             { "success", txn },
-        }, ETCD_SLOW_TIMEOUT, [this, target_name, child_name](std::string err, json11::Json res)
+        }, [this, target_name, child_name](std::string err, json11::Json res)
         {
             parent->waiting--;
             if (err != "")
@@ -453,7 +454,7 @@ resume_9:
             "/"+std::to_string(INODE_NO_POOL(cur))
         );
         parent->waiting++;
-        parent->cli->st_cli.etcd_txn(json11::Json::object {
+        parent->cli->st_cli.etcd_txn_slow(json11::Json::object {
             { "compare", json11::Json::array {
                 json11::Json::object {
                     { "target", "MOD" },
@@ -467,12 +468,14 @@ resume_9:
                     { "request_delete_range", json11::Json::object {
                         { "key", cur_cfg_key },
                     } },
+                },
+                json11::Json::object {
                     { "request_delete_range", json11::Json::object {
                         { "key", base64_encode(parent->cli->st_cli.etcd_prefix+"/index/image/"+cur_name) },
                     } },
                 },
             } },
-        }, ETCD_SLOW_TIMEOUT, [this, cur_name](std::string err, json11::Json res)
+        }, [this, cur_name](std::string err, json11::Json res)
         {
             parent->waiting--;
             if (err != "")

src/cluster_client.cpp

@@ -64,6 +64,7 @@ cluster_client_t::cluster_client_t(ring_loop_t *ringloop, timerfd_manager_t *tfd
     st_cli.on_change_osd_state_hook = [this](uint64_t peer_osd) { on_change_osd_state_hook(peer_osd); };
     st_cli.on_change_hook = [this](std::map<std::string, etcd_kv_t> & changes) { on_change_hook(changes); };
     st_cli.on_load_pgs_hook = [this](bool success) { on_load_pgs_hook(success); };
+    st_cli.on_reload_hook = [this]() { st_cli.load_global_config(); };
 
     st_cli.parse_config(config);
     st_cli.load_global_config();
@@ -533,8 +534,8 @@ void cluster_client_t::copy_write(cluster_op_t *op, std::map<object_id, cluster_
             unsigned iov_len = (op->iov.buf[iov_idx].iov_len - iov_pos);
             if (iov_len <= cur_len)
             {
-                memcpy(dirty_it->second.buf + pos - dirty_it->first.stripe,
-                    op->iov.buf[iov_idx].iov_base + iov_pos, iov_len);
+                memcpy((uint8_t*)dirty_it->second.buf + pos - dirty_it->first.stripe,
+                    (uint8_t*)op->iov.buf[iov_idx].iov_base + iov_pos, iov_len);
                 pos += iov_len;
                 len -= iov_len;
                 cur_len -= iov_len;
@@ -543,8 +544,8 @@ void cluster_client_t::copy_write(cluster_op_t *op, std::map<object_id, cluster_
             }
             else
             {
-                memcpy(dirty_it->second.buf + pos - dirty_it->first.stripe,
-                    op->iov.buf[iov_idx].iov_base + iov_pos, cur_len);
+                memcpy((uint8_t*)dirty_it->second.buf + pos - dirty_it->first.stripe,
+                    (uint8_t*)op->iov.buf[iov_idx].iov_base + iov_pos, cur_len);
                 pos += cur_len;
                 len -= cur_len;
                 iov_pos += cur_len;
@@ -761,7 +762,7 @@ static void add_iov(int size, bool skip, cluster_op_t *op, int &iov_idx, size_t
         {
             if (!skip)
             {
-                iov.push_back(op->iov.buf[iov_idx].iov_base + iov_pos, cur_left);
+                iov.push_back((uint8_t*)op->iov.buf[iov_idx].iov_base + iov_pos, cur_left);
             }
             left -= cur_left;
             iov_pos = 0;
@@ -771,7 +772,7 @@ static void add_iov(int size, bool skip, cluster_op_t *op, int &iov_idx, size_t
         {
             if (!skip)
             {
-                iov.push_back(op->iov.buf[iov_idx].iov_base + iov_pos, left);
+                iov.push_back((uint8_t*)op->iov.buf[iov_idx].iov_base + iov_pos, left);
             }
             iov_pos += left;
             left = 0;
@@ -816,7 +817,7 @@ void cluster_client_t::slice_rw(cluster_op_t *op)
                 // First allocation
                 memset(op->bitmap_buf, 0, object_bitmap_size);
             }
-            op->part_bitmaps = op->bitmap_buf + object_bitmap_size;
+            op->part_bitmaps = (uint8_t*)op->bitmap_buf + object_bitmap_size;
             op->bitmap_buf_size = bitmap_mem;
         }
     }
@@ -838,7 +839,7 @@ void cluster_client_t::slice_rw(cluster_op_t *op)
             while (cur < end)
             {
                 unsigned bmp_loc = (cur - op->offset)/bs_bitmap_granularity;
-                bool skip = (((*(uint8_t*)(op->bitmap_buf + bmp_loc/8)) >> (bmp_loc%8)) & 0x1);
+                bool skip = (((*((uint8_t*)op->bitmap_buf + bmp_loc/8)) >> (bmp_loc%8)) & 0x1);
                 if (skip_prev != skip)
                 {
                     if (cur > prev)
@@ -943,7 +944,7 @@ bool cluster_client_t::try_send(cluster_op_t *op, int i)
                     .meta_revision = meta_rev,
                     .version = op->opcode == OSD_OP_WRITE || op->opcode == OSD_OP_DELETE ? op->version : 0,
                 } },
-                .bitmap = (op->opcode == OSD_OP_READ || op->opcode == OSD_OP_READ_BITMAP ? op->part_bitmaps + pg_bitmap_size*i : NULL),
+                .bitmap = (op->opcode == OSD_OP_READ || op->opcode == OSD_OP_READ_BITMAP ? (uint8_t*)op->part_bitmaps + pg_bitmap_size*i : NULL),
                 .bitmap_len = (unsigned)(op->opcode == OSD_OP_READ || op->opcode == OSD_OP_READ_BITMAP ? pg_bitmap_size : 0),
                 .callback = [this, part](osd_op_t *op_part)
                 {
@@ -1154,7 +1155,7 @@ void cluster_client_t::copy_part_bitmap(cluster_op_t *op, cluster_op_part_t *par
     if (!(object_offset & 0x7) && !(part_offset & 0x7) && (part_len >= 8))
     {
         // Copy bytes
-        mem_or(op->bitmap_buf + object_offset/8, part->op.bitmap + part_offset/8, part_len/8);
+        mem_or((uint8_t*)op->bitmap_buf + object_offset/8, (uint8_t*)part->op.bitmap + part_offset/8, part_len/8);
         object_offset += (part_len & ~0x7);
         part_offset += (part_len & ~0x7);
         part_len = (part_len & 0x7);
@@ -1162,8 +1163,8 @@ void cluster_client_t::copy_part_bitmap(cluster_op_t *op, cluster_op_part_t *par
     while (part_len > 0)
     {
         // Copy bits
-        (*(uint8_t*)(op->bitmap_buf + (object_offset >> 3))) |= (
-            (((*(uint8_t*)(part->op.bitmap + (part_offset >> 3))) >> (part_offset & 0x7)) & 0x1) << (object_offset & 0x7)
+        (*((uint8_t*)op->bitmap_buf + (object_offset >> 3))) |= (
+            (((*((uint8_t*)part->op.bitmap + (part_offset >> 3))) >> (part_offset & 0x7)) & 0x1) << (object_offset & 0x7)
         );
         part_offset++;
         object_offset++;

src/dump_journal.cpp

@@ -75,7 +75,7 @@ int main(int argc, char *argv[])
             uint64_t s;
             for (s = 0; s < self.journal_block; s += 8)
             {
-                if (*((uint64_t*)(data+s)) != 0)
+                if (*((uint64_t*)((uint8_t*)data+s)) != 0)
                     break;
             }
             if (s == self.journal_block)
@@ -139,7 +139,7 @@ int journal_dump_t::dump_block(void *buf)
     bool wrapped = false;
     while (pos < journal_block)
     {
-        journal_entry *je = (journal_entry*)(buf + pos);
+        journal_entry *je = (journal_entry*)((uint8_t*)buf + pos);
         if (je->magic != JOURNAL_MAGIC || je->type < JE_MIN || je->type > JE_MAX ||
             !all && started && je->crc32_prev != crc32_last)
         {

src/epoll_manager.cpp

@@ -13,6 +13,7 @@
 epoll_manager_t::epoll_manager_t(ring_loop_t *ringloop)
 {
     this->ringloop = ringloop;
+    this->pending = false;
 
     epoll_fd = epoll_create(1);
     if (epoll_fd < 0)
@@ -22,11 +23,19 @@ epoll_manager_t::epoll_manager_t(ring_loop_t *ringloop)
 
     tfd = new timerfd_manager_t([this](int fd, bool wr, std::function<void(int, int)> handler) { set_fd_handler(fd, wr, handler); });
 
+    consumer.loop = [this]()
+    {
+        if (pending)
+            handle_epoll_events();
+    };
+    ringloop->register_consumer(&consumer);
+
     handle_epoll_events();
 }
 
 epoll_manager_t::~epoll_manager_t()
 {
+    ringloop->unregister_consumer(&consumer);
     if (tfd)
     {
         delete tfd;
@@ -64,8 +73,13 @@ void epoll_manager_t::handle_epoll_events()
     io_uring_sqe *sqe = ringloop->get_sqe();
     if (!sqe)
     {
-        throw std::runtime_error("can't get SQE, will fall out of sync with EPOLLET");
+        // Don't handle epoll events until we manage to post the next event handler
+        // otherwise we'll fall out of sync with EPOLLET
+        pending = true;
+        ringloop->wakeup();
+        return;
     }
+    pending = false;
     ring_data_t *data = ((ring_data_t*)sqe->user_data);
     my_uring_prep_poll_add(sqe, epoll_fd, POLLIN);
     data->callback = [this](ring_data_t *data)

src/epoll_manager.h

@@ -11,6 +11,8 @@
 class epoll_manager_t
 {
     int epoll_fd;
+    bool pending;
+    ring_consumer_t consumer;
     ring_loop_t *ringloop;
     std::map<int, std::function<void(int, int)>> epoll_handlers;
 public:

src/etcd_state_client.cpp

@@ -5,6 +5,7 @@
 #include "pg_states.h"
 #include "etcd_state_client.h"
 #ifndef __MOCK__
+#include "addr_util.h"
 #include "http_client.h"
 #include "base64.h"
 #endif
@@ -17,12 +18,22 @@ etcd_state_client_t::~etcd_state_client_t()
     }
     watches.clear();
     etcd_watches_initialised = -1;
+    if (ws_keepalive_timer >= 0)
+    {
+        tfd->clear_timer(ws_keepalive_timer);
+        ws_keepalive_timer = -1;
+    }
 #ifndef __MOCK__
     if (etcd_watch_ws)
     {
-        etcd_watch_ws->close();
+        http_close(etcd_watch_ws);
         etcd_watch_ws = NULL;
     }
+    if (keepalive_client)
+    {
+        http_close(keepalive_client);
+        keepalive_client = NULL;
+    }
 #endif
 }
 
@@ -43,19 +54,26 @@ etcd_kv_t etcd_state_client_t::parse_etcd_kv(const json11::Json & kv_json)
     return kv;
 }
 
-void etcd_state_client_t::etcd_txn(json11::Json txn, int timeout, std::function<void(std::string, json11::Json)> callback)
+void etcd_state_client_t::etcd_txn(json11::Json txn, int timeout, int retries, int interval, std::function<void(std::string, json11::Json)> callback)
 {
-    etcd_call("/kv/txn", txn, timeout, callback);
+    etcd_call("/kv/txn", txn, timeout, retries, interval, callback);
 }
 
-void etcd_state_client_t::etcd_call(std::string api, json11::Json payload, int timeout, std::function<void(std::string, json11::Json)> callback)
+void etcd_state_client_t::etcd_txn_slow(json11::Json txn, std::function<void(std::string, json11::Json)> callback)
 {
-    if (!etcd_addresses.size())
+    etcd_call("/kv/txn", txn, etcd_slow_timeout, max_etcd_attempts, 0, callback);
+}
+
+void etcd_state_client_t::etcd_call(std::string api, json11::Json payload, int timeout,
+    int retries, int interval, std::function<void(std::string, json11::Json)> callback)
+{
+    if (!etcd_addresses.size() && !etcd_local.size())
     {
         fprintf(stderr, "etcd_address is missing in Vitastor configuration\n");
         exit(1);
     }
-    std::string etcd_address = etcd_addresses[rand() % etcd_addresses.size()];
+    pick_next_etcd();
+    std::string etcd_address = selected_etcd_address;
     std::string etcd_api_path;
     int pos = etcd_address.find('/');
     if (pos >= 0)
@@ -68,9 +86,49 @@ void etcd_state_client_t::etcd_call(std::string api, json11::Json payload, int t
         "Host: "+etcd_address+"\r\n"
         "Content-Type: application/json\r\n"
         "Content-Length: "+std::to_string(req.size())+"\r\n"
-        "Connection: close\r\n"
+        "Connection: keep-alive\r\n"
+        "Keep-Alive: timeout="+std::to_string(etcd_keepalive_timeout)+"\r\n"
         "\r\n"+req;
-    http_request_json(tfd, etcd_address, req, timeout, callback);
+    auto cb = [this, api, payload, timeout, retries, interval, callback,
+        cur_addr = selected_etcd_address](const http_response_t *response)
+    {
+        std::string err;
+        json11::Json data;
+        response->parse_json_response(err, data);
+        if (err != "")
+        {
+            if (cur_addr == selected_etcd_address)
+                selected_etcd_address = "";
+            if (retries > 0)
+            {
+                if (this->log_level > 0)
+                {
+                    printf(
+                        "Warning: etcd request failed: %s, retrying %d more times\n",
+                        err.c_str(), retries
+                    );
+                }
+                if (interval > 0)
+                {
+                    tfd->set_timer(interval, false, [this, api, payload, timeout, retries, interval, callback](int)
+                    {
+                        etcd_call(api, payload, timeout, retries-1, interval, callback);
+                    });
+                }
+                else
+                    etcd_call(api, payload, timeout, retries-1, interval, callback);
+            }
+            else
+                callback(err, data);
+        }
+        else
+            callback(err, data);
+    };
+    if (!keepalive_client)
+    {
+        keepalive_client = http_init(tfd);
+    }
+    http_request(keepalive_client, etcd_address, req, { .timeout = timeout, .keepalive = true }, cb);
 }
 
 void etcd_state_client_t::add_etcd_url(std::string addr)
@@ -84,9 +142,30 @@ void etcd_state_client_t::add_etcd_url(std::string addr)
             fprintf(stderr, "HTTPS is unsupported for etcd. Either use plain HTTP or setup a local proxy for etcd interaction\n");
             exit(1);
         }
-        if (addr.find('/') == std::string::npos)
+        if (!local_ips.size())
+            local_ips = getifaddr_list();
+        std::string check_addr;
+        int pos = addr.find('/');
+        int pos2 = addr.find(':');
+        if (pos2 >= 0)
+            check_addr = addr.substr(0, pos2);
+        else if (pos >= 0)
+            check_addr = addr.substr(0, pos);
+        else
+            check_addr = addr;
+        if (pos == std::string::npos)
             addr += "/v3";
-        this->etcd_addresses.push_back(addr);
+        int i;
+        for (i = 0; i < local_ips.size(); i++)
+        {
+            if (local_ips[i] == check_addr)
+            {
+                this->etcd_local.push_back(addr);
+                break;
+            }
+        }
+        if (i >= local_ips.size())
+            this->etcd_addresses.push_back(addr);
     }
 }
 
@@ -123,16 +202,74 @@ void etcd_state_client_t::parse_config(const json11::Json & config)
         this->etcd_prefix = "/"+this->etcd_prefix;
     }
     this->log_level = config["log_level"].int64_value();
+    this->etcd_keepalive_timeout = config["etcd_keepalive_timeout"].uint64_value();
+    if (this->etcd_keepalive_timeout <= 0)
+    {
+        this->etcd_keepalive_timeout = config["etcd_report_interval"].uint64_value() * 2;
+        if (this->etcd_keepalive_timeout < 30)
+            this->etcd_keepalive_timeout = 30;
+    }
+    this->etcd_ws_keepalive_interval = config["etcd_ws_keepalive_interval"].uint64_value();
+    if (this->etcd_ws_keepalive_interval <= 0)
+    {
+        this->etcd_ws_keepalive_interval = 30;
+    }
+    this->max_etcd_attempts = config["max_etcd_attempts"].uint64_value();
+    if (this->max_etcd_attempts <= 0)
+    {
+        this->max_etcd_attempts = 5;
+    }
+    this->etcd_slow_timeout = config["etcd_slow_timeout"].uint64_value();
+    if (this->etcd_slow_timeout <= 0)
+    {
+        this->etcd_slow_timeout = 5000;
+    }
+    this->etcd_quick_timeout = config["etcd_quick_timeout"].uint64_value();
+    if (this->etcd_quick_timeout <= 0)
+    {
+        this->etcd_quick_timeout = 1000;
+    }
+}
+
+void etcd_state_client_t::pick_next_etcd()
+{
+    if (selected_etcd_address != "")
+        return;
+    if (addresses_to_try.size() == 0)
+    {
+        // Prefer local etcd, if any
+        for (int i = 0; i < etcd_local.size(); i++)
+            addresses_to_try.push_back(etcd_local[i]);
+        std::vector<int> ns;
+        for (int i = 0; i < etcd_addresses.size(); i++)
+            ns.push_back(i);
+        if (!rand_initialized)
+        {
+            timespec tv;
+            clock_gettime(CLOCK_REALTIME, &tv);
+            srand48(tv.tv_sec*1000000000 + tv.tv_nsec);
+            rand_initialized = true;
+        }
+        while (ns.size())
+        {
+            int i = lrand48() % ns.size();
+            addresses_to_try.push_back(etcd_addresses[ns[i]]);
+            ns.erase(ns.begin()+i, ns.begin()+i+1);
+        }
+    }
+    selected_etcd_address = addresses_to_try[0];
+    addresses_to_try.erase(addresses_to_try.begin(), addresses_to_try.begin()+1);
 }
 
 void etcd_state_client_t::start_etcd_watcher()
 {
-    if (!etcd_addresses.size())
+    if (!etcd_addresses.size() && !etcd_local.size())
     {
         fprintf(stderr, "etcd_address is missing in Vitastor configuration\n");
         exit(1);
     }
-    std::string etcd_address = etcd_addresses[rand() % etcd_addresses.size()];
+    pick_next_etcd();
+    std::string etcd_address = selected_etcd_address;
     std::string etcd_api_path;
     int pos = etcd_address.find('/');
     if (pos >= 0)
@@ -141,10 +278,20 @@ void etcd_state_client_t::start_etcd_watcher()
         etcd_address = etcd_address.substr(0, pos);
     }
     etcd_watches_initialised = 0;
-    etcd_watch_ws = open_websocket(tfd, etcd_address, etcd_api_path+"/watch", ETCD_SLOW_TIMEOUT, [this](const http_response_t *msg)
+    ws_alive = 1;
+    if (etcd_watch_ws)
+    {
+        http_close(etcd_watch_ws);
+        etcd_watch_ws = NULL;
+    }
+    if (this->log_level > 1)
+        printf("Trying to connect to etcd websocket at %s\n", etcd_address.c_str());
+    etcd_watch_ws = open_websocket(tfd, etcd_address, etcd_api_path+"/watch", etcd_slow_timeout,
+        [this, cur_addr = selected_etcd_address](const http_response_t *msg)
     {
         if (msg->body.length())
         {
+            ws_alive = 1;
             std::string json_err;
             json11::Json data = json11::Json::parse(msg->body, json_err);
             if (json_err != "")
@@ -155,11 +302,46 @@ void etcd_state_client_t::start_etcd_watcher()
             {
                 if (data["result"]["created"].bool_value())
                 {
+                    if (etcd_watches_initialised == 3 && this->log_level > 0)
+                        fprintf(stderr, "Successfully subscribed to etcd at %s\n", selected_etcd_address.c_str());
                     etcd_watches_initialised++;
                 }
+                if (data["result"]["canceled"].bool_value())
+                {
+                    // etcd watch canceled, maybe because the revision was compacted
+                    if (data["result"]["compact_revision"].uint64_value())
+                    {
+                        // we may miss events if we proceed
+                        // so we should restart from the beginning if we can
+                        if (on_reload_hook != NULL)
+                        {
+                            fprintf(stderr, "Revisions before %lu were compacted by etcd, reloading state\n",
+                                data["result"]["compact_revision"].uint64_value());
+                            if (etcd_watch_ws)
+                            {
+                                http_close(etcd_watch_ws);
+                                etcd_watch_ws = NULL;
+                            }
+                            etcd_watch_revision = 0;
+                            on_reload_hook();
+                        }
+                        else
+                        {
+                            fprintf(stderr, "Revisions before %lu were compacted by etcd, exiting\n",
+                                data["result"]["compact_revision"].uint64_value());
+                            exit(1);
+                        }
+                    }
+                    else
+                    {
+                        fprintf(stderr, "Watch canceled by etcd, reason: %s, exiting\n", data["result"]["cancel_reason"].string_value().c_str());
+                        exit(1);
+                    }
+                }
                 if (etcd_watches_initialised == 4)
                 {
-                    etcd_watch_revision = data["result"]["header"]["revision"].uint64_value();
+                    etcd_watch_revision = data["result"]["header"]["revision"].uint64_value()+1;
+                    addresses_to_try.clear();
                 }
                 // First gather all changes into a hash to remove multiple overwrites
                 std::map<std::string, etcd_kv_t> changes;
@@ -188,11 +370,22 @@ void etcd_state_client_t::start_etcd_watcher()
         }
         if (msg->eof)
         {
-            etcd_watch_ws = NULL;
+            if (cur_addr == selected_etcd_address)
+            {
+                fprintf(stderr, "Disconnected from etcd %s\n", selected_etcd_address.c_str());
+                selected_etcd_address = "";
+            }
+            else
+                fprintf(stderr, "Disconnected from etcd\n");
+            if (etcd_watch_ws)
+            {
+                http_close(etcd_watch_ws);
+                etcd_watch_ws = NULL;
+            }
             if (etcd_watches_initialised == 0)
             {
-                // Connection not established, retry in <ETCD_SLOW_TIMEOUT>
-                tfd->set_timer(ETCD_SLOW_TIMEOUT, false, [this](int)
+                // Connection not established, retry in <etcd_quick_timeout>
+                tfd->set_timer(etcd_quick_timeout, false, [this](int)
                 {
                     start_etcd_watcher();
                 });
@@ -204,54 +397,84 @@ void etcd_state_client_t::start_etcd_watcher()
             }
         }
     });
-    etcd_watch_ws->post_message(WS_TEXT, json11::Json(json11::Json::object {
+    http_post_message(etcd_watch_ws, WS_TEXT, json11::Json(json11::Json::object {
         { "create_request", json11::Json::object {
             { "key", base64_encode(etcd_prefix+"/config/") },
             { "range_end", base64_encode(etcd_prefix+"/config0") },
-            { "start_revision", etcd_watch_revision+1 },
+            { "start_revision", etcd_watch_revision },
             { "watch_id", ETCD_CONFIG_WATCH_ID },
             { "progress_notify", true },
         } }
     }).dump());
-    etcd_watch_ws->post_message(WS_TEXT, json11::Json(json11::Json::object {
+    http_post_message(etcd_watch_ws, WS_TEXT, json11::Json(json11::Json::object {
         { "create_request", json11::Json::object {
             { "key", base64_encode(etcd_prefix+"/osd/state/") },
             { "range_end", base64_encode(etcd_prefix+"/osd/state0") },
-            { "start_revision", etcd_watch_revision+1 },
+            { "start_revision", etcd_watch_revision },
             { "watch_id", ETCD_OSD_STATE_WATCH_ID },
             { "progress_notify", true },
         } }
     }).dump());
-    etcd_watch_ws->post_message(WS_TEXT, json11::Json(json11::Json::object {
+    http_post_message(etcd_watch_ws, WS_TEXT, json11::Json(json11::Json::object {
         { "create_request", json11::Json::object {
             { "key", base64_encode(etcd_prefix+"/pg/state/") },
             { "range_end", base64_encode(etcd_prefix+"/pg/state0") },
-            { "start_revision", etcd_watch_revision+1 },
+            { "start_revision", etcd_watch_revision },
             { "watch_id", ETCD_PG_STATE_WATCH_ID },
             { "progress_notify", true },
         } }
     }).dump());
-    etcd_watch_ws->post_message(WS_TEXT, json11::Json(json11::Json::object {
+    http_post_message(etcd_watch_ws, WS_TEXT, json11::Json(json11::Json::object {
         { "create_request", json11::Json::object {
             { "key", base64_encode(etcd_prefix+"/pg/history/") },
             { "range_end", base64_encode(etcd_prefix+"/pg/history0") },
-            { "start_revision", etcd_watch_revision+1 },
+            { "start_revision", etcd_watch_revision },
             { "watch_id", ETCD_PG_HISTORY_WATCH_ID },
             { "progress_notify", true },
         } }
     }).dump());
+    if (ws_keepalive_timer < 0)
+    {
+        ws_keepalive_timer = tfd->set_timer(etcd_ws_keepalive_interval*1000, true, [this](int)
+        {
+            if (!etcd_watch_ws)
+            {
+                // Do nothing
+            }
+            else if (!ws_alive)
+            {
+                if (this->log_level > 0)
+                {
+                    fprintf(stderr, "Websocket ping failed, disconnecting from etcd %s\n", selected_etcd_address.c_str());
+                }
+                if (etcd_watch_ws)
+                {
+                    http_close(etcd_watch_ws);
+                    etcd_watch_ws = NULL;
+                }
+                start_etcd_watcher();
+            }
+            else
+            {
+                ws_alive = 0;
+                http_post_message(etcd_watch_ws, WS_TEXT, json11::Json(json11::Json::object {
+                    { "progress_request", json11::Json::object { } }
+                }).dump());
+            }
+        });
+    }
 }
 
 void etcd_state_client_t::load_global_config()
 {
     etcd_call("/kv/range", json11::Json::object {
         { "key", base64_encode(etcd_prefix+"/config/global") }
-    }, ETCD_SLOW_TIMEOUT, [this](std::string err, json11::Json data)
+    }, etcd_slow_timeout, max_etcd_attempts, 0, [this](std::string err, json11::Json data)
     {
         if (err != "")
         {
             fprintf(stderr, "Error reading OSD configuration from etcd: %s\n", err.c_str());
-            tfd->set_timer(ETCD_SLOW_TIMEOUT, false, [this](int timer_id)
+            tfd->set_timer(etcd_slow_timeout, false, [this](int timer_id)
             {
                 load_global_config();
             });
@@ -319,12 +542,13 @@ void etcd_state_client_t::load_pgs()
     {
         req["compare"] = checks;
     }
-    etcd_txn(req, ETCD_SLOW_TIMEOUT, [this](std::string err, json11::Json data)
+    etcd_txn_slow(req, [this](std::string err, json11::Json data)
     {
         if (err != "")
         {
+            // Retry indefinitely
             fprintf(stderr, "Error loading PGs from etcd: %s\n", err.c_str());
-            tfd->set_timer(ETCD_SLOW_TIMEOUT, false, [this](int timer_id)
+            tfd->set_timer(etcd_slow_timeout, false, [this](int timer_id)
             {
                 load_pgs();
             });
@@ -337,7 +561,7 @@ void etcd_state_client_t::load_pgs()
         }
         if (!etcd_watch_revision)
         {
-            etcd_watch_revision = data["header"]["revision"].uint64_value();
+            etcd_watch_revision = data["header"]["revision"].uint64_value()+1;
         }
         for (auto & res: data["responses"].array_items())
         {
@@ -784,3 +1008,8 @@ json11::Json::object etcd_state_client_t::serialize_inode_cfg(inode_config_t *cf
     }
     return new_cfg;
 }
+
+int etcd_state_client_t::address_count()
+{
+    return etcd_addresses.size() + etcd_local.size();
+}

src/etcd_state_client.h

@@ -12,10 +12,6 @@
 #define ETCD_PG_HISTORY_WATCH_ID 3
 #define ETCD_OSD_STATE_WATCH_ID 4
 
-#define MAX_ETCD_ATTEMPTS 5
-#define ETCD_SLOW_TIMEOUT 5000
-#define ETCD_QUICK_TIMEOUT 1000
-
 #define DEFAULT_BLOCK_SIZE 128*1024
 
 struct etcd_kv_t
@@ -70,17 +66,31 @@ struct inode_watch_t
     inode_config_t cfg;
 };
 
-struct websocket_t;
+struct http_co_t;
 
 struct etcd_state_client_t
 {
 protected:
+    std::vector<std::string> local_ips;
+    std::vector<std::string> etcd_addresses;
+    std::vector<std::string> etcd_local;
+    std::string selected_etcd_address;
+    std::vector<std::string> addresses_to_try;
     std::vector<inode_watch_t*> watches;
-    websocket_t *etcd_watch_ws = NULL;
+    http_co_t *etcd_watch_ws = NULL, *keepalive_client = NULL;
+    int ws_keepalive_timer = -1;
+    int ws_alive = 0;
+    bool rand_initialized = false;
     uint64_t bs_block_size = DEFAULT_BLOCK_SIZE;
     void add_etcd_url(std::string);
+    void pick_next_etcd();
 public:
-    std::vector<std::string> etcd_addresses;
+    int etcd_keepalive_timeout = 30;
+    int etcd_ws_keepalive_interval = 30;
+    int max_etcd_attempts = 5;
+    int etcd_quick_timeout = 1000;
+    int etcd_slow_timeout = 5000;
+
     std::string etcd_prefix;
     int log_level = 0;
     timerfd_manager_t *tfd = NULL;
@@ -98,11 +108,13 @@ public:
     std::function<void(bool)> on_load_pgs_hook;
     std::function<void(pool_id_t, pg_num_t)> on_change_pg_history_hook;
     std::function<void(osd_num_t)> on_change_osd_state_hook;
+    std::function<void()> on_reload_hook;
 
     json11::Json::object serialize_inode_cfg(inode_config_t *cfg);
     etcd_kv_t parse_etcd_kv(const json11::Json & kv_json);
-    void etcd_call(std::string api, json11::Json payload, int timeout, std::function<void(std::string, json11::Json)> callback);
-    void etcd_txn(json11::Json txn, int timeout, std::function<void(std::string, json11::Json)> callback);
+    void etcd_call(std::string api, json11::Json payload, int timeout, int retries, int interval, std::function<void(std::string, json11::Json)> callback);
+    void etcd_txn(json11::Json txn, int timeout, int retries, int interval, std::function<void(std::string, json11::Json)> callback);
+    void etcd_txn_slow(json11::Json txn, std::function<void(std::string, json11::Json)> callback);
     void start_etcd_watcher();
     void load_global_config();
     void load_pgs();
@@ -110,5 +122,6 @@ public:
     void parse_config(const json11::Json & config);
     inode_watch_t* watch_inode(std::string name);
     void close_watch(inode_watch_t* watch);
+    int address_count();
     ~etcd_state_client_t();
 };

src/fio_cluster.cpp

@@ -247,6 +247,12 @@ static int sec_setup(struct thread_data *td)
             vitastor_c_uring_wait_events(bsd->cli);
         }
         td->files[0]->real_file_size = vitastor_c_inode_get_size(bsd->watch);
+        if (!vitastor_c_inode_get_num(bsd->watch) ||
+            !td->files[0]->real_file_size)
+        {
+            td_verror(td, EINVAL, "image does not exist");
+            return 1;
+        }
     }
 
     bsd->trace = o->trace ? true : false;

src/fio_engine.cpp

@@ -26,9 +26,8 @@
 
 #include "blockstore.h"
 #include "epoll_manager.h"
-#include "fio_headers.h"
-
 #include "json11/json11.hpp"
+#include "fio_headers.h"
 
 struct bs_data
 {
@@ -150,7 +149,6 @@ static int bs_init(struct thread_data *td)
 static enum fio_q_status bs_queue(struct thread_data *td, struct io_u *io)
 {
     bs_data *bsd = (bs_data*)td->io_ops_data;
-    int n = bsd->op_n;
     if (io->ddir == DDIR_SYNC && bsd->last_sync)
     {
         return FIO_Q_COMPLETED;
@@ -178,7 +176,7 @@ static enum fio_q_status bs_queue(struct thread_data *td, struct io_u *io)
         op->version = UINT64_MAX; // last unstable
         op->offset = io->offset % bsd->bs->get_block_size();
         op->len = io->xfer_buflen;
-        op->callback = [io, n](blockstore_op_t *op)
+        op->callback = [io](blockstore_op_t *op)
         {
             io->error = op->retval < 0 ? -op->retval : 0;
             bs_data *bsd = (bs_data*)io->engine_data;
@@ -200,7 +198,7 @@ static enum fio_q_status bs_queue(struct thread_data *td, struct io_u *io)
         op->version = 0; // assign automatically
         op->offset = io->offset % bsd->bs->get_block_size();
         op->len = io->xfer_buflen;
-        op->callback = [io, n](blockstore_op_t *op)
+        op->callback = [io](blockstore_op_t *op)
         {
             io->error = op->retval < 0 ? -op->retval : 0;
             bs_data *bsd = (bs_data*)io->engine_data;
@@ -215,7 +213,7 @@ static enum fio_q_status bs_queue(struct thread_data *td, struct io_u *io)
         break;
     case DDIR_SYNC:
         op->opcode = BS_OP_SYNC_STAB_ALL;
-        op->callback = [io, n](blockstore_op_t *op)
+        op->callback = [io](blockstore_op_t *op)
         {
             bs_data *bsd = (bs_data*)io->engine_data;
             io->error = op->retval < 0 ? -op->retval : 0;
@@ -230,6 +228,7 @@ static enum fio_q_status bs_queue(struct thread_data *td, struct io_u *io)
         break;
     default:
         io->error = EINVAL;
+        delete op;
         return FIO_Q_COMPLETED;
     }
 

src/fio_headers.h

@@ -1,4 +1,3 @@
-extern "C" {
 // Kill atomics in fio headers
 #define _STDATOMIC_H
 #include "fio/arch/arch.h"
@@ -11,6 +10,7 @@ extern "C" {
 #define CONFIG_HAVE_GETTID
 #define CONFIG_SYNC_FILE_RANGE
 #define CONFIG_PWRITEV2
+extern "C" {
 #include "fio/fio.h"
 #include "fio/optgroup.h"
 }

src/fio_sec_osd.cpp

@@ -28,16 +28,23 @@
 #include <vector>
 #include <unordered_map>
 
+#include "addr_util.h"
 #include "rw_blocking.h"
 #include "osd_ops.h"
 #include "fio_headers.h"
 
+struct op_buf_t
+{
+    osd_any_op_t buf;
+    io_u* fio_op;
+};
+
 struct sec_data
 {
     int connect_fd;
     /* block_size = 1 << block_order (128KB by default) */
     uint64_t block_order = 17, block_size = 1 << 17;
-    std::unordered_map<uint64_t, io_u*> queue;
+    std::unordered_map<uint64_t, op_buf_t*> queue;
     bool last_sync = false;
     /* The list of completed io_u structs. */
     std::vector<io_u*> completed;
@@ -52,6 +59,7 @@ struct sec_options
     int single_primary = 0;
     int trace = 0;
     int block_order = 17;
+    int zerocopy_send = 0;
 };
 
 static struct fio_option options[] = {
@@ -102,6 +110,16 @@ static struct fio_option options[] = {
         .category = FIO_OPT_C_ENGINE,
         .group  = FIO_OPT_G_FILENAME,
     },
+    {
+        .name   = "zerocopy_send",
+        .lname  = "Use zero-copy send",
+        .type   = FIO_OPT_BOOL,
+        .off1   = offsetof(struct sec_options, zerocopy_send),
+        .help   = "Use zero-copy send (MSG_ZEROCOPY)",
+        .def    = "0",
+        .category = FIO_OPT_C_ENGINE,
+        .group  = FIO_OPT_G_FILENAME,
+    },
     {
         .name = NULL,
     },
@@ -152,17 +170,14 @@ static int sec_init(struct thread_data *td)
     bsd->block_order = o->block_order == 0 ? 17 : o->block_order;
     bsd->block_size = 1 << o->block_order;
 
-    struct sockaddr_in addr;
-    int r;
-    if ((r = inet_pton(AF_INET, o->host ? o->host : "127.0.0.1", &addr.sin_addr)) != 1)
+    sockaddr addr;
+    if (!string_to_addr(std::string(o->host ? o->host : "127.0.0.1"), false, o->port > 0 ? o->port : 11203, &addr))
     {
-        fprintf(stderr, "server address: %s%s\n", o->host ? o->host : "127.0.0.1", r == 0 ? " is not valid" : ": no ipv4 support");
+        fprintf(stderr, "server address: %s is not valid\n", o->host ? o->host : "127.0.0.1");
         return 1;
     }
-    addr.sin_family = AF_INET;
-    addr.sin_port = htons(o->port ? o->port : 11203);
 
-    bsd->connect_fd = socket(AF_INET, SOCK_STREAM, 0);
+    bsd->connect_fd = socket(addr.sa_family, SOCK_STREAM, 0);
     if (bsd->connect_fd < 0)
     {
         perror("socket");
@@ -175,6 +190,19 @@ static int sec_init(struct thread_data *td)
     }
     int one = 1;
     setsockopt(bsd->connect_fd, SOL_TCP, TCP_NODELAY, &one, sizeof(one));
+    if (o->zerocopy_send)
+    {
+#ifndef SO_ZEROCOPY
+        perror("zerocopy send not supported on your system (socket.h misses SO_ZEROCOPY)");
+        return 1;
+#else
+        if (setsockopt(bsd->connect_fd, SOL_SOCKET, SO_ZEROCOPY, &one, sizeof(one)) < 0)
+        {
+            perror("setsockopt zerocopy");
+            return 1;
+        }
+#endif
+    }
 
     // FIXME: read config (block size) from OSD
 
@@ -195,7 +223,9 @@ static enum fio_q_status sec_queue(struct thread_data *td, struct io_u *io)
     }
 
     io->engine_data = bsd;
-    osd_any_op_t op = { 0 };
+    op_buf_t *op_buf = new op_buf_t;
+    op_buf->fio_op = io;
+    osd_any_op_t &op = op_buf->buf;
 
     op.hdr.magic = SECONDARY_OSD_OP_MAGIC;
     op.hdr.id = n;
@@ -259,6 +289,7 @@ static enum fio_q_status sec_queue(struct thread_data *td, struct io_u *io)
         break;
     default:
         io->error = EINVAL;
+        delete op_buf;
         return FIO_Q_COMPLETED;
     }
 
@@ -271,19 +302,24 @@ static enum fio_q_status sec_queue(struct thread_data *td, struct io_u *io)
     io->error = 0;
     bsd->inflight++;
     bsd->op_n++;
-    bsd->queue[n] = io;
+    bsd->queue[n] = op_buf;
 
     iovec iov[2] = { { .iov_base = op.buf, .iov_len = OSD_PACKET_SIZE } };
     int iovcnt = 1, wtotal = OSD_PACKET_SIZE;
     if (io->ddir == DDIR_WRITE)
     {
-        iov[1] = { .iov_base = io->xfer_buf, .iov_len = io->xfer_buflen };
+        iov[iovcnt++] = { .iov_base = io->xfer_buf, .iov_len = io->xfer_buflen };
         wtotal += io->xfer_buflen;
-        iovcnt++;
     }
-    if (writev_blocking(bsd->connect_fd, iov, iovcnt) != wtotal)
+    if (sendv_blocking(bsd->connect_fd, iov, iovcnt,
+#ifdef SO_ZEROCOPY
+        opt->zerocopy_send ? MSG_ZEROCOPY : 0
+#else
+        0
+#endif
+    ) != wtotal)
     {
-        perror("writev");
+        perror("sendmsg");
         exit(1);
     }
 
@@ -312,7 +348,8 @@ static int sec_getevents(struct thread_data *td, unsigned int min, unsigned int
             fprintf(stderr, "bad reply: op id %lx missing in local queue\n", reply.hdr.id);
             exit(1);
         }
-        io_u* io = it->second;
+        io_u* io = it->second->fio_op;
+        delete it->second;
         bsd->queue.erase(it);
         if (io->ddir == DDIR_READ)
         {
@@ -321,7 +358,23 @@ static int sec_getevents(struct thread_data *td, unsigned int min, unsigned int
                 fprintf(stderr, "Short read: retval = %ld instead of %llu\n", reply.hdr.retval, io->xfer_buflen);
                 exit(1);
             }
-            read_blocking(bsd->connect_fd, io->xfer_buf, io->xfer_buflen);
+            // Support bitmap
+            uint64_t bitmap = 0;
+            int iovcnt = 0;
+            iovec iov[2];
+            if (reply.sec_rw.attr_len > 0)
+            {
+                if (reply.sec_rw.attr_len <= 8)
+                    iov[iovcnt++] = { .iov_base = &bitmap, .iov_len = reply.sec_rw.attr_len };
+                else
+                    iov[iovcnt++] = { .iov_base = (void*)(bitmap = (uint64_t)malloc(reply.sec_rw.attr_len)), .iov_len = reply.sec_rw.attr_len };
+            }
+            iov[iovcnt++] = { .iov_base = io->xfer_buf, .iov_len = io->xfer_buflen };
+            readv_blocking(bsd->connect_fd, iov, iovcnt);
+            if (reply.sec_rw.attr_len > 8)
+            {
+                free((void*)bitmap);
+            }
         }
         else if (io->ddir == DDIR_WRITE)
         {