Release 0.6.17

- Fix incorrect reading of extra metadata block leading to extra unknown objects in stats
- Fix CSI driver volumeMode: Block support
- Add block PVC and pod examples
- Fix build under 32 bit architectures
- Fix slow connection ramp-up caused by up_wait_retry_interval

CMakeLists.txt

@@ -2,6 +2,6 @@ cmake_minimum_required(VERSION 2.8)
 
 project(vitastor)
 
-set(VERSION "0.6.11")
+set(VERSION "0.6.17")
 
 add_subdirectory(src)

README-ru.md

@@ -55,11 +55,11 @@ Vitastor на данный момент находится в статусе п
 
 ## Планы развития
 
-- Поддержка удаления снапшотов (слияния слоёв)
 - Более корректные скрипты разметки дисков и автоматического запуска OSD
 - Другие инструменты администрирования
 - Плагины для OpenNebula и других облачных систем
 - iSCSI-прокси
+- Упрощённый NFS прокси
 - Более быстрое переключение при отказах
 - Фоновая проверка целостности без контрольных сумм (сверка реплик)
 - Контрольные суммы
@@ -407,6 +407,7 @@ Vitastor с однопоточной NBD прокси на том же стен
 - На хостах мониторов:
   - Пропишите нужные вам значения в файле `/usr/lib/vitastor/mon/make-units.sh`
   - Создайте юниты systemd для etcd и мониторов: `/usr/lib/vitastor/mon/make-units.sh`
+- Запустите etcd и мониторы: `systemctl start etcd vitastor-mon`
 - Пропишите etcd_address и osd_network в `/etc/vitastor/vitastor.conf`. Например:
   ```
   {
@@ -414,7 +415,14 @@ Vitastor с однопоточной NBD прокси на том же стен
     "osd_network": "10.200.1.0/24"
   }
   ```
-- Создайте юниты systemd для OSD: `/usr/lib/vitastor/make-osd.sh /dev/disk/by-partuuid/XXX [/dev/disk/by-partuuid/YYY ...]`
+- Инициализуйте OSD:
+  - SSD: `/usr/lib/vitastor/make-osd.sh /dev/disk/by-partuuid/XXX [/dev/disk/by-partuuid/YYY ...]`
+  - Гибридные, HDD+SSD: `/usr/lib/vitastor/mon/make-osd-hybrid.js /dev/sda /dev/sdb ...` - передайте
+    все ваши SSD и HDD скрипту в командной строке подряд, скрипт автоматически выделит разделы под
+    журналы на SSD и данные на HDD. Скрипт пропускает HDD, на которых уже есть разделы
+    или вообще какие-то данные, поэтому если диски непустые, сначала очистите их с помощью
+    `wipefs -a`. SSD с таблицей разделов не пропускаются, но так как скрипт создаёт новые разделы
+    для журналов, на SSD должно быть доступно свободное нераспределённое место.
 - Вы можете менять параметры OSD в юнитах systemd или в `vitastor.conf`. Смысл некоторых параметров:
   - `disable_data_fsync 1` - отключает fsync, используется с SSD с конденсаторами.
   - `immediate_commit all` - используется с SSD с конденсаторами.
@@ -430,7 +438,6 @@ Vitastor с однопоточной NBD прокси на том же стен
     диски, используемые на одном из тестовых стендов - Intel D3-S4510 - очень сильно не любят такую
     перезапись, и для них была добавлена эта опция. Когда данный режим включён, также нужно поднимать
     значение `journal_sector_buffer_count`, так как иначе Vitastor не хватит буферов для записи в журнал.
-- Запустите все etcd: `systemctl start etcd`
 - Создайте глобальную конфигурацию в etcd: `etcdctl --endpoints=... put /vitastor/config/global '{"immediate_commit":"all"}'`
   (если все ваши диски - серверные с конденсаторами).
 - Создайте пулы: `etcdctl --endpoints=... put /vitastor/config/pools '{"1":{"name":"testpool","scheme":"replicated","pg_size":2,"pg_minsize":1,"pg_count":256,"failure_domain":"host"}}'`.

README.md

@@ -49,11 +49,11 @@ breaking changes in the future. However, the following is implemented:
 
 ## Roadmap
 
-- Snapshot deletion (layer merge) support
 - Better OSD creation and auto-start tools
 - Other administrative tools
-- Plugins for OpenNebula, Proxmox and other cloud systems
+- Plugins for OpenNebula and other cloud systems
 - iSCSI proxy
+- Simplified NFS proxy
 - Faster failover
 - Scrubbing without checksums (verification of replicas)
 - Checksums
@@ -360,6 +360,7 @@ and calculate disk offsets almost by hand. This will be fixed in near future.
 - On the monitor hosts:
   - Edit variables at the top of `/usr/lib/vitastor/mon/make-units.sh` to desired values.
   - Create systemd units for the monitor and etcd: `/usr/lib/vitastor/mon/make-units.sh`
+- Start etcd and monitors: `systemctl start etcd vitastor-mon`
 - Put etcd_address and osd_network into `/etc/vitastor/vitastor.conf`. Example:
   ```
   {
@@ -367,7 +368,13 @@ and calculate disk offsets almost by hand. This will be fixed in near future.
     "osd_network": "10.200.1.0/24"
   }
   ```
-- Create systemd units for your OSDs: `/usr/lib/vitastor/mon/make-osd.sh /dev/disk/by-partuuid/XXX [/dev/disk/by-partuuid/YYY ...]`
+- Initialize OSDs:
+  - Simplest, SSD-only: `/usr/lib/vitastor/mon/make-osd.sh /dev/disk/by-partuuid/XXX [/dev/disk/by-partuuid/YYY ...]`
+  - Hybrid, HDD+SSD: `/usr/lib/vitastor/mon/make-osd-hybrid.js /dev/sda /dev/sdb ...` - pass all your
+    devices (HDD and SSD) to this script - it will partition disks and initialize journals on its own.
+    This script skips HDDs which are already partitioned so if you want to use non-empty disks for
+    Vitastor you should first wipe them with `wipefs -a`. SSDs with GPT partition table are not skipped,
+    but some free unpartitioned space must be available because the script creates new partitions for journals.
 - You can change OSD configuration in units or in `vitastor.conf`. Notable configuration variables:
   - `disable_data_fsync 1` - only safe with server-grade drives with capacitors.
   - `immediate_commit all` - use this if all your drives are server-grade.

csi/Makefile

@@ -1,4 +1,4 @@
-VERSION ?= v0.6.11
+VERSION ?= v0.6.17
 
 all: build push
 

csi/deploy/004-csi-nodeplugin.yaml

@@ -49,7 +49,7 @@ spec:
             capabilities:
               add: ["SYS_ADMIN"]
             allowPrivilegeEscalation: true
-          image: vitalif/vitastor-csi:v0.6.11
+          image: vitalif/vitastor-csi:v0.6.17
           args:
             - "--node=$(NODE_ID)"
             - "--endpoint=$(CSI_ENDPOINT)"

csi/deploy/007-csi-provisioner.yaml

@@ -116,7 +116,7 @@ spec:
             privileged: true
             capabilities:
               add: ["SYS_ADMIN"]
-          image: vitalif/vitastor-csi:v0.6.11
+          image: vitalif/vitastor-csi:v0.6.17
           args:
             - "--node=$(NODE_ID)"
             - "--endpoint=$(CSI_ENDPOINT)"

csi/deploy/example-pvc-block.yaml

@@ -0,0 +1,13 @@
+---
+apiVersion: v1
+kind: PersistentVolumeClaim
+metadata:
+  name: test-vitastor-pvc-block
+spec:
+  storageClassName: vitastor
+  volumeMode: Block
+  accessModes:
+    - ReadWriteMany
+  resources:
+    requests:
+      storage: 10Gi

csi/deploy/example-test-pod-block.yaml

@@ -0,0 +1,17 @@
+apiVersion: v1
+kind: Pod
+metadata:
+  name: vitastor-test-block-pvc
+  namespace: default
+spec:
+  containers:
+  - name: vitastor-test-block-pvc
+    image: nginx
+    volumeDevices:
+      - name: data
+        devicePath: /dev/xvda
+  volumes:
+  - name: data
+    persistentVolumeClaim:
+      claimName: test-vitastor-pvc-block
+      readOnly: false

csi/deploy/example-test-pod.yaml

@@ -0,0 +1,17 @@
+apiVersion: v1
+kind: Pod
+metadata:
+  name: vitastor-test-nginx
+  namespace: default
+spec:
+  containers:
+   - name: vitastor-test-nginx
+     image: nginx
+     volumeMounts:
+       - mountPath: /usr/share/nginx/html/s3
+         name: data
+  volumes:
+   - name: data
+     persistentVolumeClaim:
+       claimName: test-vitastor-pvc
+       readOnly: false

csi/src/config.go

@@ -5,7 +5,7 @@ package vitastor
 
 const (
     vitastorCSIDriverName    = "csi.vitastor.io"
-    vitastorCSIDriverVersion = "0.6.11"
+    vitastorCSIDriverVersion = "0.6.17"
 )
 
 // Config struct fills the parameters of request or user input

csi/src/nodeserver.go

@@ -67,29 +67,44 @@ func (ns *NodeServer) NodePublishVolume(ctx context.Context, req *csi.NodePublis
     klog.Infof("received node publish volume request %+v", protosanitizer.StripSecrets(req))
 
     targetPath := req.GetTargetPath()
+    isBlock := req.GetVolumeCapability().GetBlock() != nil
 
     // Check that it's not already mounted
-    free, error := mount.IsNotMountPoint(ns.mounter, targetPath)
+    _, error := mount.IsNotMountPoint(ns.mounter, targetPath)
     if (error != nil)
     {
         if (os.IsNotExist(error))
         {
-            error := os.MkdirAll(targetPath, 0777)
-            if (error != nil)
+            if (isBlock)
             {
-                return nil, status.Error(codes.Internal, error.Error())
+                pathFile, err := os.OpenFile(targetPath, os.O_CREATE|os.O_RDWR, 0o600)
+                if (err != nil)
+                {
+                    klog.Errorf("failed to create block device mount target %s with error: %v", targetPath, err)
+                    return nil, status.Error(codes.Internal, err.Error())
+                }
+                err = pathFile.Close()
+                if (err != nil)
+                {
+                    klog.Errorf("failed to close %s with error: %v", targetPath, err)
+                    return nil, status.Error(codes.Internal, err.Error())
+                }
+            }
+            else
+            {
+                err := os.MkdirAll(targetPath, 0777)
+                if (err != nil)
+                {
+                    klog.Errorf("failed to create fs mount target %s with error: %v", targetPath, err)
+                    return nil, status.Error(codes.Internal, err.Error())
+                }
             }
-            free = true
         }
         else
         {
             return nil, status.Error(codes.Internal, error.Error())
         }
     }
-    if (!free)
-    {
-        return &csi.NodePublishVolumeResponse{}, nil
-    }
 
     ctxVars := make(map[string]string)
     err := json.Unmarshal([]byte(req.VolumeId), &ctxVars)
@@ -149,7 +164,6 @@ func (ns *NodeServer) NodePublishVolume(ctx context.Context, req *csi.NodePublis
 
     // Format the device (ext4 or xfs)
     fsType := req.GetVolumeCapability().GetMount().GetFsType()
-    isBlock := req.GetVolumeCapability().GetBlock() != nil
     opt := req.GetVolumeCapability().GetMount().GetMountFlags()
     opt = append(opt, "_netdev")
     if ((req.VolumeCapability.AccessMode.Mode == csi.VolumeCapability_AccessMode_MULTI_NODE_READER_ONLY ||

debian/changelog

@@ -1,4 +1,4 @@
-vitastor (0.6.11-1) unstable; urgency=medium
+vitastor (0.6.17-1) unstable; urgency=medium
 
   * RDMA support
   * Bugfixes

debian/vitastor.Dockerfile

@@ -33,8 +33,8 @@ RUN set -e -x; \
     mkdir -p /root/packages/vitastor-$REL; \
     rm -rf /root/packages/vitastor-$REL/*; \
     cd /root/packages/vitastor-$REL; \
-    cp -r /root/vitastor vitastor-0.6.11; \
-    cd vitastor-0.6.11; \
+    cp -r /root/vitastor vitastor-0.6.17; \
+    cd vitastor-0.6.17; \
     ln -s /root/fio-build/fio-*/ ./fio; \
     FIO=$(head -n1 fio/debian/changelog | perl -pe 's/^.*\((.*?)\).*$/$1/'); \
     ls /usr/include/linux/raw.h || cp ./debian/raw.h /usr/include/linux/raw.h; \
@@ -47,8 +47,8 @@ RUN set -e -x; \
     rm -rf a b; \
     echo "dep:fio=$FIO" > debian/fio_version; \
     cd /root/packages/vitastor-$REL; \
-    tar --sort=name --mtime='2020-01-01' --owner=0 --group=0 --exclude=debian -cJf vitastor_0.6.11.orig.tar.xz vitastor-0.6.11; \
-    cd vitastor-0.6.11; \
+    tar --sort=name --mtime='2020-01-01' --owner=0 --group=0 --exclude=debian -cJf vitastor_0.6.17.orig.tar.xz vitastor-0.6.17; \
+    cd vitastor-0.6.17; \
     V=$(head -n1 debian/changelog | perl -pe 's/^.*\((.*?)\).*$/$1/'); \
     DEBFULLNAME="Vitaliy Filippov <vitalif@yourcmc.ru>" dch -D $REL -v "$V""$REL" "Rebuild for $REL"; \
     DEB_BUILD_OPTIONS=nocheck dpkg-buildpackage --jobs=auto -sa; \

docs/params/common.yml

@@ -0,0 +1,35 @@
+- name: config_path
+  type: string
+  default: "/etc/vitastor/vitastor.conf"
+  info: |
+    Path to the JSON configuration file. Configuration file is optional,
+    a non-existing configuration file does not prevent Vitastor from
+    running if required parameters are specified.
+  info_ru: |
+    Путь к файлу конфигурации в формате JSON. Файл конфигурации необязателен,
+    без него Vitastor тоже будет работать, если переданы необходимые параметры.
+- name: etcd_address
+  type: string or array of strings
+  type_ru: строка или массив строк
+  info: |
+    etcd connection endpoint(s). Multiple endpoints may be delimited by "," or
+    specified in a JSON array `["10.0.115.10:2379/v3","10.0.115.11:2379/v3"]`.
+    Note that https is not supported for etcd connections yet.
+  info_ru: |
+    Адрес(а) подключения к etcd. Несколько адресов могут разделяться запятой
+    или указываться в виде JSON-массива `["10.0.115.10:2379/v3","10.0.115.11:2379/v3"]`.
+- name: etcd_prefix
+  type: string
+  default: "/vitastor"
+  info: |
+    Prefix for all keys in etcd used by Vitastor. You can change prefix and, for
+    example, use a single etcd cluster for multiple Vitastor clusters.
+  info_ru: |
+    Префикс для ключей etcd, которые использует Vitastor. Вы можете задать другой
+    префикс, например, чтобы запустить несколько кластеров Vitastor с одним
+    кластером etcd.
+- name: log_level
+  type: int
+  default: 0
+  info: Log level. Raise if you want more verbose output.
+  info_ru: Уровень логгирования. Повысьте, если хотите более подробный вывод.

docs/params/layout-cluster.yml

@@ -0,0 +1,200 @@
+- name: block_size
+  type: int
+  default: 131072
+  info: |
+    Size of objects (data blocks) into which all physical and virtual drives are
+    subdivided in Vitastor. One of current main settings in Vitastor, affects
+    memory usage, write amplification and I/O load distribution effectiveness.
+
+    Recommended default block size is 128 KB for SSD and 4 MB for HDD. In fact,
+    it's possible to use 4 MB for SSD too - it will lower memory usage, but
+    may increase average WA and reduce linear performance.
+
+    OSDs with different block sizes (for example, SSD and SSD+HDD OSDs) can
+    currently coexist in one etcd instance only within separate Vitastor
+    clusters with different etcd_prefix'es.
+
+    Also block size can't be changed after OSD initialization without losing
+    data.
+
+    You must always specify block_size in etcd in /vitastor/config/global if
+    you change it so all clients can know about it.
+
+    OSD memory usage is roughly (SIZE / BLOCK * 68 bytes) which is roughly
+    544 MB per 1 TB of used disk space with the default 128 KB block size.
+  info_ru: |
+    Размер объектов (блоков данных), на которые делятся физические и виртуальные
+    диски в Vitastor. Одна из ключевых на данный момент настроек, влияет на
+    потребление памяти, объём избыточной записи (write amplification) и
+    эффективность распределения нагрузки по OSD.
+
+    Рекомендуемые по умолчанию размеры блока - 128 килобайт для SSD и 4
+    мегабайта для HDD. В принципе, для SSD можно тоже использовать 4 мегабайта,
+    это понизит использование памяти, но ухудшит распределение нагрузки и в
+    среднем увеличит WA.
+
+    OSD с разными размерами блока (например, SSD и SSD+HDD OSD) на данный
+    момент могут сосуществовать в рамках одного etcd только в виде двух независимых
+    кластеров Vitastor с разными etcd_prefix.
+
+    Также размер блока нельзя менять после инициализации OSD без потери данных.
+
+    Если вы меняете размер блока, обязательно прописывайте его в etcd в
+    /vitastor/config/global, дабы все клиенты его знали.
+
+    Потребление памяти OSD составляет примерно (РАЗМЕР / БЛОК * 68 байт),
+    т.е. примерно 544 МБ памяти на 1 ТБ занятого места на диске при
+    стандартном 128 КБ блоке.
+- name: bitmap_granularity
+  type: int
+  default: 4096
+  info: |
+    Required virtual disk write alignment ("sector size"). Must be a multiple
+    of disk_alignment. It's called bitmap granularity because Vitastor tracks
+    an allocation bitmap for each object containing 2 bits per each
+    (bitmap_granularity) bytes.
+
+    This parameter can't be changed after OSD initialization without losing
+    data. Also it's fixed for the whole Vitastor cluster i.e. two different
+    values can't be used in a single Vitastor cluster.
+
+    Clients MUST be aware of this parameter value, so put it into etcd key
+    /vitastor/config/global if you change it for any reason.
+  info_ru: |
+    Требуемое выравнивание записи на виртуальные диски (размер их "сектора").
+    Должен быть кратен disk_alignment. Называется гранулярностью битовой карты
+    потому, что Vitastor хранит битовую карту для каждого объекта, содержащую
+    по 2 бита на каждые (bitmap_granularity) байт.
+
+    Данный параметр нельзя менять после инициализации OSD без потери данных.
+    Также он фиксирован для всего кластера Vitastor, т.е. разные значения
+    не могут сосуществовать в одном кластере.
+
+    Клиенты ДОЛЖНЫ знать правильное значение этого параметра, так что если вы
+    его меняете, обязательно прописывайте изменённое значение в etcd в ключ
+    /vitastor/config/global.
+- name: immediate_commit
+  type: string
+  default: false
+  info: |
+    Another parameter which is really important for performance.
+
+    Desktop SSDs are very fast (100000+ iops) for simple random writes
+    without cache flush. However, they are really slow (only around 1000 iops)
+    if you try to fsync() each write, that is, when you want to guarantee that
+    each change gets immediately persisted to the physical media.
+
+    Server-grade SSDs with "Advanced/Enhanced Power Loss Protection" or with
+    "Supercapacitor-based Power Loss Protection", on the other hand, are equally
+    fast with and without fsync because their cache is protected from sudden
+    power loss by a built-in supercapacitor-based "UPS".
+
+    Some software-defined storage systems always fsync each write and thus are
+    really slow when used with desktop SSDs. Vitastor, however, can also
+    efficiently utilize desktop SSDs by postponing fsync until the client calls
+    it explicitly.
+
+    This is what this parameter regulates. When it's set to "all" the whole
+    Vitastor cluster commits each change to disks immediately and clients just
+    ignore fsyncs because they know for sure that they're unneeded. This reduces
+    the amount of network roundtrips performed by clients and improves
+    performance. So it's always better to use server grade SSDs with
+    supercapacitors even with Vitastor, especially given that they cost only
+    a bit more than desktop models.
+
+    There is also a common SATA SSD (and HDD too!) firmware bug (or feature)
+    that makes server SSDs which have supercapacitors slow with fsync. To check
+    if your SSDs are affected, compare benchmark results from `fio -name=test
+    -ioengine=libaio -direct=1 -bs=4k -rw=randwrite -iodepth=1` with and without
+    `-fsync=1`. Results should be the same. If fsync=1 result is worse you can
+    try to work around this bug by "disabling" drive write-back cache by running
+    `hdparm -W 0 /dev/sdXX` or `echo write through > /sys/block/sdXX/device/scsi_disk/*/cache_type`
+    (IMPORTANT: don't mistake it with `/sys/block/sdXX/queue/write_cache` - it's
+    unsafe to change by hand). The same may apply to newer HDDs with internal
+    SSD cache or "media-cache" - for example, a lot of Seagate EXOS drives have
+    it (they have internal SSD cache even though it's not stated in datasheets).
+
+    This parameter must be set both in etcd in /vitastor/config/global and in
+    OSD command line or configuration. Setting it to "all" or "small" requires
+    enabling disable_journal_fsync and disable_meta_fsync, setting it to "all"
+    also requires enabling disable_data_fsync.
+
+    TLDR: For optimal performance, set immediate_commit to "all" if you only use
+    SSDs with supercapacitor-based power loss protection (nonvolatile
+    write-through cache) for both data and journals in the whole Vitastor
+    cluster. Set it to "small" if you only use such SSDs for journals. Leave
+    empty if your drives have write-back cache.
+  info_ru: |
+    Ещё один важный для производительности параметр.
+
+    Модели SSD для настольных компьютеров очень быстрые (100000+ операций в
+    секунду) при простой случайной записи без сбросов кэша. Однако они очень
+    медленные (всего порядка 1000 iops), если вы пытаетесь сбрасывать кэш после
+    каждой записи, то есть, если вы пытаетесь гарантировать, что каждое
+    изменение физически записывается в энергонезависимую память.
+
+    С другой стороны, серверные SSD с конденсаторами - функцией, называемой
+    "Advanced/Enhanced Power Loss Protection" или просто "Supercapacitor-based
+    Power Loss Protection" - одинаково быстрые и со сбросом кэша, и без
+    него, потому что их кэш защищён от потери питания встроенным "источником
+    бесперебойного питания" на основе суперконденсаторов и на самом деле они
+    его никогда не сбрасывают.
+
+    Некоторые программные СХД всегда сбрасывают кэши дисков при каждой записи
+    и поэтому работают очень медленно с настольными SSD. Vitastor, однако, может
+    откладывать fsync до явного его вызова со стороны клиента и таким образом
+    эффективно утилизировать настольные SSD.
+
+    Данный параметр влияет как раз на это. Когда он установлен в значение "all",
+    весь кластер Vitastor мгновенно фиксирует каждое изменение на физические
+    носители и клиенты могут просто игнорировать запросы fsync, т.к. они точно
+    знают, что fsync-и не нужны. Это уменьшает число необходимых обращений к OSD
+    по сети и улучшает производительность. Поэтому даже с Vitastor лучше всегда
+    использовать только серверные модели SSD с суперконденсаторами, особенно
+    учитывая то, что стоят они ненамного дороже настольных.
+
+    Также в прошивках SATA SSD (и даже HDD!) очень часто встречается либо баг,
+    либо просто особенность логики, из-за которой серверные SSD, имеющие
+    конденсаторы и защиту от потери питания, всё равно медленно работают с
+    fsync. Чтобы понять, подвержены ли этой проблеме ваши SSD, сравните
+    результаты тестов `fio -name=test -ioengine=libaio -direct=1 -bs=4k
+    -rw=randwrite -iodepth=1` без и с опцией `-fsync=1`. Результаты должны
+    быть одинаковые. Если результат с `fsync=1` хуже, вы можете попробовать
+    обойти проблему, "отключив" кэш записи диска командой `hdparm -W 0 /dev/sdXX`
+    либо `echo write through > /sys/block/sdXX/device/scsi_disk/*/cache_type`
+    (ВАЖНО: не перепутайте с `/sys/block/sdXX/queue/write_cache` - этот параметр
+    менять руками небезопасно). Такая же проблема может встречаться и в новых
+    HDD-дисках с внутренним SSD или "медиа" кэшем - например, она встречается во
+    многих дисках Seagate EXOS (у них есть внутренний SSD-кэш, хотя это и не
+    указано в спецификациях).
+
+    Данный параметр нужно указывать и в etcd в /vitastor/config/global, и в
+    командной строке или конфигурации OSD. Значения "all" и "small" требуют
+    включения disable_journal_fsync и disable_meta_fsync, значение "all" также
+    требует включения disable_data_fsync.
+
+    Итого, вкратце: для оптимальной производительности установите
+    immediate_commit в значение "all", если вы используете в кластере только SSD
+    с суперконденсаторами и для данных, и для журналов. Если вы используете
+    такие SSD для всех журналов, но не для данных - можете установить параметр
+    в "small". Если и какие-то из дисков журналов имеют волатильный кэш записи -
+    оставьте параметр пустым.
+- name: client_dirty_limit
+  type: int
+  default: 33554432
+  info: |
+    Without immediate_commit=all this parameter sets the limit of "dirty"
+    (not committed by fsync) data allowed by the client before forcing an
+    additional fsync and committing the data. Also note that the client always
+    holds a copy of uncommitted data in memory so this setting also affects
+    RAM usage of clients.
+
+    This parameter doesn't affect OSDs themselves.
+  info_ru: |
+    При работе без immediate_commit=all - это лимит объёма "грязных" (не
+    зафиксированных fsync-ом) данных, при достижении которого клиент будет
+    принудительно вызывать fsync и фиксировать данные. Также стоит иметь в виду,
+    что в этом случае до момента fsync клиент хранит копию незафиксированных
+    данных в памяти, то есть, настройка влияет на потребление памяти клиентами.
+
+    Параметр не влияет на сами OSD.

docs/params/layout-osd.yml

@@ -0,0 +1,205 @@
+- name: data_device
+  type: string
+  info: |
+    Path to the block device to use for data. It's highly recommendded to use
+    stable paths for all device names: `/dev/disk/by-partuuid/xxx...` instead
+    of just `/dev/sda` or `/dev/nvme0n1` to not mess up after server restart.
+    Files can also be used instead of block devices, but this is implemented
+    only for testing purposes and not for production.
+  info_ru: |
+    Путь к диску (блочному устройству) для хранения данных. Крайне рекомендуется
+    использовать стабильные пути: `/dev/disk/by-partuuid/xxx...` вместо простых
+    `/dev/sda` или `/dev/nvme0n1`, чтобы пути не могли спутаться после
+    перезагрузки сервера. Также вместо блочных устройств можно указывать файлы,
+    но это реализовано только для тестирования, а не для боевой среды.
+- name: meta_device
+  type: string
+  info: |
+    Path to the block device to use for the metadata. Metadata must be on a fast
+    SSD or performance will suffer. If this option is skipped, `data_device` is
+    used for the metadata.
+  info_ru: |
+    Путь к диску метаданных. Метаданные должны располагаться на быстром
+    SSD-диске, иначе производительность пострадает. Если эта опция не указана,
+    для метаданных используется `data_device`.
+- name: journal_device
+  type: string
+  info: |
+    Path to the block device to use for the journal. Journal must be on a fast
+    SSD or performance will suffer. If this option is skipped, `meta_device` is
+    used for the journal, and if it's also empty, journal is put on
+    `data_device`. It's almost always fine to put metadata and journal on the
+    same device, in this case you only need to set `meta_device`.
+  info_ru: |
+    Путь к диску журнала. Журнал должен располагаться на быстром SSD-диске,
+    иначе производительность пострадает. Если эта опция не указана,
+    для журнала используется `meta_device`, если же пуста и она, журнал
+    располагается на `data_device`. Нормально располагать журнал и метаданные
+    на одном устройстве, в этом случае достаточно указать только `meta_device`.
+- name: journal_offset
+  type: int
+  default: 0
+  info: Offset on the device in bytes where the journal is stored.
+  info_ru: Смещение на устройстве в байтах, по которому располагается журнал.
+- name: journal_size
+  type: int
+  info: |
+    Journal size in bytes. Doesn't have to be large, 16-32 MB is usually fine.
+    By default, the whole journal device will be used for the journal. You must
+    set it to some value manually (or use make-osd.sh) if you colocate the
+    journal with data or metadata.
+  info_ru: |
+    Размер журнала в байтах. Большим быть не обязан, 16-32 МБ обычно достаточно.
+    По умолчанию для журнала используется всё устройство журнала. Если же вы
+    размещаете журнал на устройстве данных или метаданных, то вы должны
+    установить эту опцию в какое-то значение сами (или использовать скрипт
+    make-osd.sh).
+- name: meta_offset
+  type: int
+  default: 0
+  info: |
+    Offset on the device in bytes where the metadata area is stored.
+    Again, set it to something if you colocate metadata with journal or data.
+  info_ru: |
+    Смещение на устройстве в байтах, по которому располагаются метаданные.
+    Эту опцию нужно задать, если метаданные у вас хранятся на том же
+    устройстве, что данные или журнал.
+- name: data_offset
+  type: int
+  default: 0
+  info: |
+    Offset on the device in bytes where the data area is stored.
+    Again, set it to something if you colocate data with journal or metadata.
+  info_ru: |
+    Смещение на устройстве в байтах, по которому располагаются данные.
+    Эту опцию нужно задать, если данные у вас хранятся на том же
+    устройстве, что метаданные или журнал.
+- name: data_size
+  type: int
+  info: |
+    Data area size in bytes. By default, the whole data device up to the end
+    will be used for the data area, but you can restrict it if you want to use
+    a smaller part. Note that there is no option to set metadata area size -
+    it's derived from the data area size.
+  info_ru: |
+    Размер области данных в байтах. По умолчанию под данные будет использована
+    вся доступная область устройства данных до конца устройства, но вы можете
+    использовать эту опцию, чтобы ограничить её меньшим размером. Заметьте, что
+    опции размера области метаданных нет - она вычисляется из размера области
+    данных автоматически.
+- name: meta_block_size
+  type: int
+  default: 4096
+  info: |
+    Physical block size of the metadata device. 4096 for most current
+    HDDs and SSDs.
+  info_ru: |
+    Размер физического блока устройства метаданных. 4096 для большинства
+    современных SSD и HDD.
+- name: journal_block_size
+  type: int
+  default: 4096
+  info: |
+    Physical block size of the journal device. Must be a multiple of
+    `disk_alignment`. 4096 for most current HDDs and SSDs.
+  info_ru: |
+    Размер физического блока устройства журнала. Должен быть кратен
+    `disk_alignment`. 4096 для большинства современных SSD и HDD.
+- name: disable_data_fsync
+  type: bool
+  default: false
+  info: |
+    Do not issue fsyncs to the data device, i.e. do not flush its cache.
+    Safe ONLY if your data device has write-through cache. If you disable
+    the cache yourself using `hdparm` or `scsi_disk/cache_type` then make sure
+    that the cache disable command is run every time before starting Vitastor
+    OSD, for example, in the systemd unit. See also `immediate_commit` option
+    for the instructions to disable cache and how to benefit from it.
+  info_ru: |
+    Не отправлять fsync-и устройству данных, т.е. не сбрасывать его кэш.
+    Безопасно, ТОЛЬКО если ваше устройство данных имеет кэш со сквозной
+    записью (write-through). Если вы отключаете кэш через `hdparm` или
+    `scsi_disk/cache_type`, то удостоверьтесь, что команда отключения кэша
+    выполняется перед каждым запуском Vitastor OSD, например, в systemd unit-е.
+    Смотрите также опцию `immediate_commit` для инструкций по отключению кэша
+    и о том, как из этого извлечь выгоду.
+- name: disable_meta_fsync
+  type: bool
+  default: false
+  info: |
+    Same as disable_data_fsync, but for the metadata device. If the metadata
+    device is not set or if the data device is used for the metadata the option
+    is ignored and disable_data_fsync value is used instead of it.
+  info_ru: |
+    То же, что disable_data_fsync, но для устройства метаданных. Если устройство
+    метаданных не задано или если оно равно устройству данных, значение опции
+    игнорируется и вместо него используется значение опции disable_data_fsync.
+- name: disable_journal_fsync
+  type: bool
+  default: false
+  info: |
+    Same as disable_data_fsync, but for the journal device. If the journal
+    device is not set or if the metadata device is used for the journal the
+    option is ignored and disable_meta_fsync value is used instead of it. If
+    the same device is used for data, metadata and journal the option is also
+    ignored and disable_data_fsync value is used instead of it.
+  info_ru: |
+    То же, что disable_data_fsync, но для устройства журнала. Если устройство
+    журнала не задано или если оно равно устройству метаданных, значение опции
+    игнорируется и вместо него используется значение опции disable_meta_fsync.
+    Если одно и то же устройство используется и под данные, и под журнал, и под
+    метаданные - значение опции также игнорируется и вместо него используется
+    значение опции disable_data_fsync.
+- name: disable_device_lock
+  type: bool
+  default: false
+  info: |
+    Do not lock data, metadata and journal block devices exclusively with
+    flock(). Though it's not recommended, but you can use it you want to run
+    multiple OSD with a single device and different offsets, without using
+    partitions.
+  info_ru: |
+    Не блокировать устройства данных, метаданных и журнала от открытия их
+    другими OSD с помощью flock(). Так делать не рекомендуется, но теоретически
+    вы можете это использовать, чтобы запускать несколько OSD на одном
+    устройстве с разными смещениями и без использования разделов.
+- name: disk_alignment
+  type: int
+  default: 4096
+  info: |
+    Required physical disk write alignment. Most current SSD and HDD drives
+    use 4 KB physical sectors even if they report 512 byte logical sector
+    size, so 4 KB is a good default setting.
+
+    Note, however, that physical sector size also affects WA, because with block
+    devices it's impossible to write anything smaller than a block. So, when
+    Vitastor has to write a single metadata entry that's only about 32 bytes in
+    size, it actually has to write the whole 4 KB sector.
+
+    Because of this it can actually be beneficial to use SSDs which work well
+    with 512 byte sectors and use 512 byte disk_alignment, journal_block_size
+    and meta_block_size. But the only SSD that may fit into this category is
+    Intel Optane (probably, not tested yet).
+
+    Clients don't need to be aware of disk_alignment, so it's not required to
+    put a modified value into etcd key /vitastor/config/global.
+  info_ru: |
+    Требуемое выравнивание записи на физические диски. Почти все современные
+    SSD и HDD диски используют 4 КБ физические секторы, даже если показывают
+    логический размер сектора 512 байт, поэтому 4 КБ - хорошее значение по
+    умолчанию.
+
+    Однако стоит понимать, что физический размер сектора тоже влияет на
+    избыточную запись (WA), потому что ничего меньше блока (сектора) на блочное
+    устройство записать невозможно. Таким образом, когда Vitastor-у нужно
+    записать на диск всего лишь одну 32-байтную запись метаданных, фактически
+    приходится перезаписывать 4 КБ сектор целиком.
+
+    Поэтому, на самом деле, может быть выгодно найти SSD, хорошо работающие с
+    меньшими, 512-байтными, блоками и использовать 512-байтные disk_alignment,
+    journal_block_size и meta_block_size. Однако единственные SSD, которые
+    теоретически могут попасть в эту категорию - это Intel Optane (но и это
+    пока не проверялось автором).
+
+    Клиентам не обязательно знать про disk_alignment, так что помещать значение
+    этого параметра в etcd в /vitastor/config/global не нужно.

docs/params/monitor.yml

@@ -0,0 +1,65 @@
+- name: etcd_mon_ttl
+  type: sec
+  min: 10
+  default: 30
+  info: Monitor etcd lease refresh interval in seconds
+  info_ru: Интервал обновления etcd резервации (lease) монитором
+- name: etcd_mon_timeout
+  type: ms
+  default: 1000
+  info: etcd request timeout used by monitor
+  info_ru: Таймаут выполнения запросов к etcd от монитора
+- name: etcd_mon_retries
+  type: int
+  default: 5
+  info: Maximum number of attempts for one monitor etcd request
+  info_ru: Максимальное число попыток выполнения запросов к etcd монитором
+- name: mon_change_timeout
+  type: ms
+  min: 100
+  default: 1000
+  info: Optimistic retry interval for monitor etcd modification requests
+  info_ru: Время повтора при коллизиях при запросах модификации в etcd, производимых монитором
+- name: mon_stats_timeout
+  type: ms
+  min: 100
+  default: 1000
+  info: |
+    Interval for monitor to wait before updating aggregated statistics in
+    etcd after receiving OSD statistics updates
+  info_ru: |
+    Интервал, который монитор ожидает при изменении статистики по отдельным
+    OSD перед обновлением агрегированной статистики в etcd
+- name: osd_out_time
+  type: sec
+  default: 600
+  info: |
+    Time after which a failed OSD is removed from the data distribution.
+    I.e. time which the monitor waits before attempting to restore data
+    redundancy using other OSDs.
+  info_ru: |
+    Время, через которое отключенный OSD исключается из распределения данных.
+    То есть, время, которое монитор ожидает перед попыткой переместить данные
+    на другие OSD и таким образом восстановить избыточность хранения.
+- name: placement_levels
+  type: json
+  default: '`{"host":100,"osd":101}`'
+  info: |
+    Levels for the placement tree. You can define arbitrary tree levels by
+    defining them in this parameter. The configuration parameter value should
+    contain a JSON object with level names as keys and integer priorities as
+    values.  Smaller priority means higher level in tree. For example,
+    "datacenter" should have smaller priority than "osd". "host" and "osd"
+    levels are always predefined and can't be removed. If one of them is not
+    present in the configuration, then it is defined with the default priority
+    (100 for "host", 101 for "osd").
+  info_ru: |
+    Определения уровней для дерева размещения OSD. Вы можете определять
+    произвольные уровни, помещая их в данный параметр конфигурации. Значение
+    параметра должно содержать JSON-объект, ключи которого будут являться
+    названиями уровней, а значения - целочисленными приоритетами. Меньшие
+    приоритеты соответствуют верхним уровням дерева. Например, уровень
+    "датацентр" должен иметь меньший приоритет, чем "OSD". Уровни с названиями
+    "host" и "osd" являются предопределёнными и не могут быть удалены. Если
+    один из них отсутствует в конфигурации, он доопределяется с приоритетом по
+    умолчанию (100 для уровня "host", 101 для "osd").

docs/params/network.yml

@@ -0,0 +1,225 @@
+- name: tcp_header_buffer_size
+  type: int
+  default: 65536
+  info: |
+    Size of the buffer used to read data using an additional copy. Vitastor
+    packet headers are 128 bytes, payload is always at least 4 KB, so it is
+    usually beneficial to try to read multiple packets at once even though
+    it requires to copy the data an additional time. The rest of each packet
+    is received without an additional copy. You can try to play with this
+    parameter and see how it affects random iops and linear bandwidth if you
+    want.
+  info_ru: |
+    Размер буфера для чтения данных с дополнительным копированием. Пакеты
+    Vitastor содержат 128-байтные заголовки, за которыми следуют данные размером
+    от 4 КБ и для мелких операций ввода-вывода обычно выгодно за 1 вызов читать
+    сразу несколько пакетов, даже не смотря на то, что это требует лишний раз
+    скопировать данные. Часть каждого пакета за пределами значения данного
+    параметра читается без дополнительного копирования. Вы можете попробовать
+    поменять этот параметр и посмотреть, как он влияет на производительность
+    случайного и линейного доступа.
+- name: use_sync_send_recv
+  type: bool
+  default: false
+  info: |
+    If true, synchronous send/recv syscalls are used instead of io_uring for
+    socket communication. Useless for OSDs because they require io_uring anyway,
+    but may be required for clients with old kernel versions.
+  info_ru: |
+    Если установлено в истину, то вместо io_uring для передачи данных по сети
+    будут использоваться обычные синхронные системные вызовы send/recv. Для OSD
+    это бессмысленно, так как OSD в любом случае нуждается в io_uring, но, в
+    принципе, это может применяться для клиентов со старыми версиями ядра.
+- name: use_rdma
+  type: bool
+  default: true
+  info: |
+    Try to use RDMA for communication if it's available. Disable if you don't
+    want Vitastor to use RDMA. RDMA increases the performance, but TCP-only
+    clients can still talk to an RDMA-enabled cluster, so you don't need to
+    make sure that all clients support RDMA when enabling it.
+  info_ru: |
+    Пытаться использовать RDMA для связи при наличии доступных устройств.
+    Отключите, если вы не хотите, чтобы Vitastor использовал RDMA.
+    RDMA улучшает производительность, но 
+    Клиенты и клиентов and TCP-only clients in the cluster at the
+    same time - TCP-only clients are still able to use an RDMA-enabled cluster.
+- name: rdma_device
+  type: string
+  info: |
+    RDMA device name to use for Vitastor OSD communications (for example,
+    "rocep5s0f0"). Please note that Vitastor RDMA requires Implicit On-Demand
+    Paging (Implicit ODP) and Scatter/Gather (SG) support from the RDMA device
+    to work. For example, Mellanox ConnectX-3 and older adapters don't have
+    Implicit ODP, so they're unsupported by Vitastor. Run `ibv_devinfo -v` as
+    root to list available RDMA devices and their features.
+  info_ru: |
+    Название RDMA-устройства для связи с Vitastor OSD (например, "rocep5s0f0").
+    Имейте в виду, что поддержка RDMA в Vitastor требует функций устройства
+    Implicit On-Demand Paging (Implicit ODP) и Scatter/Gather (SG). Например,
+    адаптеры Mellanox ConnectX-3 и более старые не поддерживают Implicit ODP и
+    потому не поддерживаются в Vitastor. Запустите `ibv_devinfo -v` от имени
+    суперпользователя, чтобы посмотреть список доступных RDMA-устройств, их
+    параметры и возможности.
+- name: rdma_port_num
+  type: int
+  default: 1
+  info: |
+    RDMA device port number to use. Only for devices that have more than 1 port.
+    See `phys_port_cnt` in `ibv_devinfo -v` output to determine how many ports
+    your device has.
+  info_ru: |
+    Номер порта RDMA-устройства, который следует использовать. Имеет смысл
+    только для устройств, у которых более 1 порта. Чтобы узнать, сколько портов
+    у вашего адаптера, посмотрите `phys_port_cnt` в выводе команды
+    `ibv_devinfo -v`.
+- name: rdma_gid_index
+  type: int
+  default: 0
+  info: |
+    Global address identifier index of the RDMA device to use. Different GID
+    indexes may correspond to different protocols like RoCEv1, RoCEv2 and iWARP.
+    Search for "GID" in `ibv_devinfo -v` output to determine which GID index
+    you need.
+
+    **IMPORTANT:** If you want to use RoCEv2 (as recommended) then the correct
+    rdma_gid_index is usually 1 (IPv6) or 3 (IPv4).
+  info_ru: |
+    Номер глобального идентификатора адреса RDMA-устройства, который следует
+    использовать. Разным gid_index могут соответствовать разные протоколы связи:
+    RoCEv1, RoCEv2, iWARP. Чтобы понять, какой нужен вам - смотрите строчки со
+    словом "GID" в выводе команды `ibv_devinfo -v`.
+
+    **ВАЖНО:** Если вы хотите использовать RoCEv2 (как мы и рекомендуем), то
+    правильный rdma_gid_index, как правило, 1 (IPv6) или 3 (IPv4).
+- name: rdma_mtu
+  type: int
+  default: 4096
+  info: |
+    RDMA Path MTU to use. Must be 1024, 2048 or 4096. There is usually no
+    sense to change it from the default 4096.
+  info_ru: |
+    Максимальная единица передачи (Path MTU) для RDMA. Должно быть равно 1024,
+    2048 или 4096. Обычно нет смысла менять значение по умолчанию, равное 4096.
+- name: rdma_max_sge
+  type: int
+  default: 128
+  info: |
+    Maximum number of scatter/gather entries to use for RDMA. OSDs negotiate
+    the actual value when establishing connection anyway, so it's usually not
+    required to change this parameter.
+  info_ru: |
+    Максимальное число записей разделения/сборки (scatter/gather) для RDMA.
+    OSD в любом случае согласовывают реальное значение при установке соединения,
+    так что менять этот параметр обычно не нужно.
+- name: rdma_max_msg
+  type: int
+  default: 1048576
+  info: Maximum size of a single RDMA send or receive operation in bytes.
+  info_ru: Максимальный размер одной RDMA-операции отправки или приёма.
+- name: rdma_max_recv
+  type: int
+  default: 8
+  info: |
+    Maximum number of parallel RDMA receive operations. Note that this number
+    of receive buffers `rdma_max_msg` in size are allocated for each client,
+    so this setting actually affects memory usage. This is because RDMA receive
+    operations are (sadly) still not zero-copy in Vitastor. It may be fixed in
+    later versions.
+  info_ru: |
+    Максимальное число параллельных RDMA-операций получения данных. Следует
+    иметь в виду, что данное число буферов размером `rdma_max_msg` выделяется
+    для каждого подключённого клиентского соединения, так что данная настройка
+    влияет на потребление памяти. Это так потому, что RDMA-приём данных в
+    Vitastor, увы, всё равно не является zero-copy, т.е. всё равно 1 раз
+    копирует данные в памяти. Данная особенность, возможно, будет исправлена в
+    более новых версиях Vitastor.
+- name: peer_connect_interval
+  type: sec
+  min: 1
+  default: 5
+  info: Interval before attempting to reconnect to an unavailable OSD.
+  info_ru: Время ожидания перед повторной попыткой соединиться с недоступным OSD.
+- name: peer_connect_timeout
+  type: sec
+  min: 1
+  default: 5
+  info: Timeout for OSD connection attempts.
+  info_ru: Максимальное время ожидания попытки соединения с OSD.
+- name: osd_idle_timeout
+  type: sec
+  min: 1
+  default: 5
+  info: |
+    OSD connection inactivity time after which clients and other OSDs send
+    keepalive requests to check state of the connection.
+  info_ru: |
+    Время неактивности соединения с OSD, после которого клиенты или другие OSD
+    посылают запрос проверки состояния соединения.
+- name: osd_ping_timeout
+  type: sec
+  min: 1
+  default: 5
+  info: |
+    Maximum time to wait for OSD keepalive responses. If an OSD doesn't respond
+    within this time, the connection to it is dropped and a reconnection attempt
+    is scheduled.
+  info_ru: |
+    Максимальное время ожидания ответа на запрос проверки состояния соединения.
+    Если OSD не отвечает за это время, соединение отключается и производится
+    повторная попытка соединения.
+- name: up_wait_retry_interval
+  type: ms
+  min: 50
+  default: 500
+  info: |
+    OSDs respond to clients with a special error code when they receive I/O
+    requests for a PG that's not synchronized and started. This parameter sets
+    the time for the clients to wait before re-attempting such I/O requests.
+  info_ru: |
+    Когда OSD получают от клиентов запросы ввода-вывода, относящиеся к не
+    поднятым на данный момент на них PG, либо к PG в процессе синхронизации,
+    они отвечают клиентам специальным кодом ошибки, означающим, что клиент
+    должен некоторое время подождать перед повторением запроса. Именно это время
+    ожидания задаёт данный параметр.
+- name: max_etcd_attempts
+  type: int
+  default: 5
+  info: |
+    Maximum number of attempts for etcd requests which can't be retried
+    indefinitely.
+  info_ru: |
+    Максимальное число попыток выполнения запросов к etcd для тех запросов,
+    которые нельзя повторять бесконечно.
+- name: etcd_quick_timeout
+  type: ms
+  default: 1000
+  info: |
+    Timeout for etcd requests which should complete quickly, like lease refresh.
+  info_ru: |
+    Максимальное время выполнения запросов к etcd, которые должны завершаться
+    быстро, таких, как обновление резервации (lease).
+- name: etcd_slow_timeout
+  type: ms
+  default: 5000
+  info: Timeout for etcd requests which are allowed to wait for some time.
+  info_ru: |
+    Максимальное время выполнения запросов к etcd, для которых не обязательно
+    гарантировать быстрое выполнение.
+- name: etcd_keepalive_timeout
+  type: sec
+  default: max(30, etcd_report_interval*2)
+  info: |
+    Timeout for etcd connection HTTP Keep-Alive. Should be higher than
+    etcd_report_interval to guarantee that keepalive actually works.
+  info_ru: |
+    Таймаут для HTTP Keep-Alive в соединениях к etcd. Должен быть больше, чем
+    etcd_report_interval, чтобы keepalive гарантированно работал.
+- name: etcd_ws_keepalive_timeout
+  type: sec
+  default: 30
+  info: |
+    etcd websocket ping interval required to keep the connection alive and
+    detect disconnections quickly.
+  info_ru: |
+    Интервал проверки живости вебсокет-подключений к etcd.

docs/params/osd.yml

@@ -0,0 +1,341 @@
+- name: etcd_report_interval
+  type: sec
+  default: 5
+  info: |
+    Interval at which OSDs report their state to etcd. Affects OSD lease time
+    and thus the failover speed. Lease time is equal to this parameter value
+    plus max_etcd_attempts * etcd_quick_timeout because it should be guaranteed
+    that every OSD always refreshes its lease in time.
+  info_ru: |
+    Интервал, с которым OSD обновляет своё состояние в etcd. Значение параметра
+    влияет на время резервации (lease) OSD и поэтому на скорость переключения
+    при падении OSD. Время lease равняется значению этого параметра плюс
+    max_etcd_attempts * etcd_quick_timeout.
+- name: run_primary
+  type: bool
+  default: true
+  info: |
+    Start primary OSD logic on this OSD. As of now, can be turned off only for
+    debugging purposes. It's possible to implement additional feature for the
+    monitor which may allow to separate primary and secondary OSDs, but it's
+    unclear why anyone could need it, so it's not implemented.
+  info_ru: |
+    Запускать логику первичного OSD на данном OSD. На данный момент отключать
+    эту опцию может иметь смысл только в целях отладки. В теории, можно
+    реализовать дополнительный режим для монитора, который позволит отделять
+    первичные OSD от вторичных, но пока не понятно, зачем это может кому-то
+    понадобиться, поэтому это не реализовано.
+- name: osd_network
+  type: string or array of strings
+  type_ru: строка или массив строк
+  info: |
+    Network mask of the network (IPv4 or IPv6) to use for OSDs. Note that
+    although it's possible to specify multiple networks here, this does not
+    mean that OSDs will create multiple listening sockets - they'll only
+    pick the first matching address of an UP + RUNNING interface. Separate
+    networks for cluster and client connections are also not implemented, but
+    they are mostly useless anyway, so it's not a big deal.
+  info_ru: |
+    Маска подсети (IPv4 или IPv6) для использования для соединений с OSD.
+    Имейте в виду, что хотя сейчас и можно передать в этот параметр несколько
+    подсетей, это не означает, что OSD будут создавать несколько слушающих
+    сокетов - они лишь будут выбирать адрес первого поднятого (состояние UP +
+    RUNNING), подходящий под заданную маску. Также не реализовано разделение
+    кластерной и публичной сетей OSD. Правда, от него обычно всё равно довольно
+    мало толку, так что особенной проблемы в этом нет.
+- name: bind_address
+  type: string
+  default: "0.0.0.0"
+  info: |
+    Instead of the network mask, you can also set OSD listen address explicitly
+    using this parameter. May be useful if you want to start OSDs on interfaces
+    that are not UP + RUNNING.
+  info_ru: |
+    Этим параметром можно явным образом задать адрес, на котором будет ожидать
+    соединений OSD (вместо использования маски подсети). Может быть полезно,
+    например, чтобы запускать OSD на неподнятых интерфейсах (не UP + RUNNING).
+- name: bind_port
+  type: int
+  info: |
+    By default, OSDs pick random ports to use for incoming connections
+    automatically. With this option you can set a specific port for a specific
+    OSD by hand.
+  info_ru: |
+    По умолчанию OSD сами выбирают случайные порты для входящих подключений.
+    С помощью данной опции вы можете задать порт для отдельного OSD вручную.
+- name: autosync_interval
+  type: sec
+  default: 5
+  info: |
+    Time interval at which automatic fsyncs/flushes are issued by each OSD when
+    the immediate_commit mode if disabled. fsyncs are required because without
+    them OSDs quickly fill their journals, become unable to clear them and
+    stall. Also this option limits the amount of recent uncommitted changes
+    which OSDs may lose in case of a power outage in case when clients don't
+    issue fsyncs at all.
+  info_ru: |
+    Временной интервал отправки автоматических fsync-ов (операций очистки кэша)
+    каждым OSD для случая, когда режим immediate_commit отключён. fsync-и нужны
+    OSD, чтобы успевать очищать журнал - без них OSD быстро заполняют журналы и
+    перестают обрабатывать операции записи. Также эта опция ограничивает объём
+    недавних незафиксированных изменений, которые OSD могут терять при
+    отключении питания, если клиенты вообще не отправляют fsync.
+- name: autosync_writes
+  type: int
+  default: 128
+  info: |
+    Same as autosync_interval, but sets the maximum number of uncommitted write
+    operations before issuing an fsync operation internally.
+  info_ru: |
+    Аналогично autosync_interval, но задаёт не временной интервал, а
+    максимальное количество незафиксированных операций записи перед
+    принудительной отправкой fsync-а.
+- name: recovery_queue_depth
+  type: int
+  default: 4
+  info: |
+    Maximum recovery operations per one primary OSD at any given moment of time.
+    Currently it's the only parameter available to tune the speed or recovery
+    and rebalancing, but it's planned to implement more.
+  info_ru: |
+    Максимальное число операций восстановления на одном первичном OSD в любой
+    момент времени. На данный момент единственный параметр, который можно менять
+    для ускорения или замедления восстановления и перебалансировки данных, но
+    в планах реализация других параметров.
+- name: recovery_sync_batch
+  type: int
+  default: 16
+  info: Maximum number of recovery operations before issuing an additional fsync.
+  info_ru: Максимальное число операций восстановления перед дополнительным fsync.
+- name: readonly
+  type: bool
+  default: false
+  info: |
+    Read-only mode. If this is enabled, an OSD will never issue any writes to
+    the underlying device. This may be useful for recovery purposes.
+  info_ru: |
+    Режим "только чтение". Если включить этот режим, OSD не будет писать ничего
+    на диск. Может быть полезно в целях восстановления.
+- name: no_recovery
+  type: bool
+  default: false
+  info: |
+    Disable automatic background recovery of objects. Note that it doesn't
+    affect implicit recovery of objects happening during writes - a write is
+    always made to a full set of at least pg_minsize OSDs.
+  info_ru: |
+    Отключить автоматическое фоновое восстановление объектов. Обратите внимание,
+    что эта опция не отключает восстановление объектов, происходящее при
+    записи - запись всегда производится в полный набор из как минимум pg_minsize
+    OSD.
+- name: no_rebalance
+  type: bool
+  default: false
+  info: |
+    Disable background movement of data between different OSDs. Disabling it
+    means that PGs in the `has_misplaced` state will be left in it indefinitely.
+  info_ru: |
+    Отключить фоновое перемещение объектов между разными OSD. Отключение
+    означает, что PG, находящиеся в состоянии `has_misplaced`, будут оставлены
+    в нём на неопределённый срок.
+- name: print_stats_interval
+  type: sec
+  default: 3
+  info: |
+    Time interval at which OSDs print simple human-readable operation
+    statistics on stdout.
+  info_ru: |
+    Временной интервал, с которым OSD печатают простую человекочитаемую
+    статистику выполнения операций в стандартный вывод.
+- name: slow_log_interval
+  type: sec
+  default: 10
+  info: |
+    Time interval at which OSDs dump slow or stuck operations on stdout, if
+    they're any. Also it's the time after which an operation is considered
+    "slow".
+  info_ru: |
+    Временной интервал, с которым OSD выводят в стандартный вывод список
+    медленных или зависших операций, если таковые имеются. Также время, при
+    превышении которого операция считается "медленной".
+- name: max_write_iodepth
+  type: int
+  default: 128
+  info: |
+    Parallel client write operation limit per one OSD. Operations that exceed
+    this limit are pushed to a temporary queue instead of being executed
+    immediately.
+  info_ru: |
+    Максимальное число одновременных клиентских операций записи на один OSD.
+    Операции, превышающие этот лимит, не исполняются сразу, а сохраняются во
+    временной очереди.
+- name: min_flusher_count
+  type: int
+  default: 1
+  info: |
+    Flusher is a micro-thread that moves data from the journal to the data
+    area of the device. Their number is auto-tuned between minimum and maximum.
+    Minimum number is set by this parameter.
+  info_ru: |
+    Flusher - это микро-поток (корутина), которая копирует данные из журнала в
+    основную область устройства данных. Их число настраивается динамически между
+    минимальным и максимальным значением. Этот параметр задаёт минимальное число.
+- name: max_flusher_count
+  type: int
+  default: 256
+  info: |
+    Maximum number of journal flushers (see above min_flusher_count).
+  info_ru: |
+    Максимальное число микро-потоков очистки журнала (см. выше min_flusher_count).
+- name: inmemory_metadata
+  type: bool
+  default: true
+  info: |
+    This parameter makes Vitastor always keep metadata area of the block device
+    in memory. It's required for good performance because it allows to avoid
+    additional read-modify-write cycles during metadata modifications. Metadata
+    area size is currently roughly 224 MB per 1 TB of data. You can turn it off
+    to reduce memory usage by this value, but it will hurt performance. This
+    restriction is likely to be removed in the future along with the upgrade
+    of the metadata storage scheme.
+  info_ru: |
+    Данный параметр заставляет Vitastor всегда держать область метаданных диска
+    в памяти. Это нужно, чтобы избегать дополнительных операций чтения с диска
+    при записи. Размер области метаданных на данный момент составляет примерно
+    224 МБ на 1 ТБ данных. При включении потребление памяти снизится примерно
+    на эту величину, но при этом также снизится и производительность. В будущем,
+    после обновления схемы хранения метаданных, это ограничение, скорее всего,
+    будет ликвидировано.
+- name: inmemory_journal
+  type: bool
+  default: true
+  info: |
+    This parameter make Vitastor always keep journal area of the block
+    device in memory. Turning it off will, again, reduce memory usage, but
+    hurt performance because flusher coroutines will have to read data from
+    the disk back before copying it into the main area. The memory usage benefit
+    is typically very small because it's sufficient to have 16-32 MB journal
+    for SSD OSDs. However, in theory it's possible that you'll want to turn it
+    off for hybrid (HDD+SSD) OSDs with large journals on quick devices.
+  info_ru: |
+    Данный параметр заставляет Vitastor всегда держать в памяти журналы OSD.
+    Отключение параметра, опять же, снижает потребление памяти, но ухудшает
+    производительность, так как для копирования данных из журнала в основную
+    область устройства OSD будут вынуждены читать их обратно с диска. Выигрыш
+    по памяти при этом обычно крайне низкий, так как для SSD OSD обычно
+    достаточно 16- или 32-мегабайтного журнала. Однако в теории отключение
+    параметра может оказаться полезным для гибридных OSD (HDD+SSD) с большими
+    журналами, расположенными на быстром по сравнению с HDD устройстве.
+- name: journal_sector_buffer_count
+  type: int
+  default: 32
+  info: |
+    Maximum number of buffers that can be used for writing journal metadata
+    blocks. The only situation when you should increase it to a larger value
+    is when you enable journal_no_same_sector_overwrites. In this case set
+    it to, for example, 1024.
+  info_ru: |
+    Максимальное число буферов, разрешённых для использования под записываемые
+    в журнал блоки метаданных. Единственная ситуация, в которой этот параметр
+    нужно менять - это если вы включаете journal_no_same_sector_overwrites. В
+    этом случае установите данный параметр, например, в 1024.
+- name: journal_no_same_sector_overwrites
+  type: bool
+  default: false
+  info: |
+    Enable this option for SSDs like Intel D3-S4510 and D3-S4610 which REALLY
+    don't like when a program overwrites the same sector multiple times in a
+    row and slow down significantly (from 25000+ iops to ~3000 iops). When
+    this option is set, Vitastor will always move to the next sector of the
+    journal after writing it instead of possibly overwriting it the second time.
+  info_ru: |
+    Включайте данную опцию для SSD вроде Intel D3-S4510 и D3-S4610, которые
+    ОЧЕНЬ не любят, когда ПО перезаписывает один и тот же сектор несколько раз
+    подряд. Такие SSD при многократной перезаписи одного и того же сектора
+    сильно замедляются - условно, с 25000 и более iops до 3000 iops. Когда
+    данная опция установлена, Vitastor всегда переходит к следующему сектору
+    журнала после записи вместо потенциально повторной перезаписи того же
+    самого сектора.
+- name: throttle_small_writes
+  type: bool
+  default: false
+  info: |
+    Enable soft throttling of small journaled writes. Useful for hybrid OSDs
+    with fast journal/metadata devices and slow data devices. The idea is that
+    small writes complete very quickly because they're first written to the
+    journal device, but moving them to the main device is slow. So if an OSD
+    allows clients to issue a lot of small writes it will perform very good
+    for several seconds and then the journal will fill up and the performance
+    will drop to almost zero. Throttling is meant to prevent this problem by
+    artifically slowing quick writes down based on the amount of free space in
+    the journal. When throttling is used, the performance of small writes will
+    decrease smoothly instead of abrupt drop at the moment when the journal
+    fills up.
+  info_ru: |
+    Разрешить мягкое ограничение скорости журналируемой записи. Полезно для
+    гибридных OSD с быстрыми устройствами метаданных и медленными устройствами
+    данных. Идея заключается в том, что мелкие записи в этой ситуации могут
+    завершаться очень быстро, так как они изначально записываются на быстрое
+    журнальное устройство (SSD). Но перемещать их потом на основное медленное
+    устройство долго. Поэтому если OSD быстро примет от клиентов очень много
+    мелких операций записи, он быстро заполнит свой журнал, после чего
+    производительность записи резко упадёт практически до нуля. Ограничение
+    скорости записи призвано решить эту проблему с помощью искусственного
+    замедления операций записи на основании объёма свободного места в журнале.
+    Когда эта опция включена, производительность мелких операций записи будет
+    снижаться плавно, а не резко в момент окончательного заполнения журнала.
+- name: throttle_target_iops
+  type: int
+  default: 100
+  info: |
+    Target maximum number of throttled operations per second under the condition
+    of full journal. Set it to approximate random write iops of your data devices
+    (HDDs).
+  info_ru: |
+    Расчётное максимальное число ограничиваемых операций в секунду при условии
+    отсутствия свободного места в журнале. Устанавливайте приблизительно равным
+    максимальной производительности случайной записи ваших устройств данных
+    (HDD) в операциях в секунду.
+- name: throttle_target_mbs
+  type: int
+  default: 100
+  info: |
+    Target maximum bandwidth in MB/s of throttled operations per second under
+    the condition of full journal. Set it to approximate linear write
+    performance of your data devices (HDDs).
+  info_ru: |
+    Расчётный максимальный размер в МБ/с ограничиваемых операций в секунду при
+    условии отсутствия свободного места в журнале. Устанавливайте приблизительно
+    равным максимальной производительности линейной записи ваших устройств
+    данных (HDD).
+- name: throttle_target_parallelism
+  type: int
+  default: 1
+  info: |
+    Target maximum parallelism of throttled operations under the condition of
+    full journal. Set it to approximate internal parallelism of your data
+    devices (1 for HDDs, 4-8 for SSDs).
+  info_ru: |
+    Расчётный максимальный параллелизм ограничиваемых операций в секунду при
+    условии отсутствия свободного места в журнале. Устанавливайте приблизительно
+    равным внутреннему параллелизму ваших устройств данных (1 для HDD, 4-8
+    для SSD).
+- name: throttle_threshold_us
+  type: us
+  default: 50
+  info: |
+    Minimal computed delay to be applied to throttled operations. Usually
+    doesn't need to be changed.
+  info_ru: |
+    Минимальная применимая к ограничиваемым операциям задержка. Обычно не
+    требует изменений.
+- name: osd_memlock
+  type: bool
+  default: false
+  info: >
+    Lock all OSD memory to prevent it from being unloaded into swap with
+    mlockall(). Requires sufficient ulimit -l (max locked memory).
+  info_ru: >
+    Блокировать всю память OSD с помощью mlockall, чтобы запретить её выгрузку
+    в пространство подкачки. Требует достаточного значения ulimit -l (лимита
+    заблокированной памяти).

mon/lp-optimizer.js

@@ -50,7 +50,7 @@ async function lp_solve(text)
     return { score, vars };
 }
 
-async function optimize_initial({ osd_tree, pg_count, pg_size = 3, pg_minsize = 2, max_combinations = 10000, parity_space = 1, round_robin = false })
+async function optimize_initial({ osd_tree, pg_count, pg_size = 3, pg_minsize = 2, max_combinations = 10000, parity_space = 1, ordered = false })
 {
     if (!pg_count || !osd_tree)
     {
@@ -92,7 +92,7 @@ async function optimize_initial({ osd_tree, pg_count, pg_size = 3, pg_minsize =
         console.log(lp);
         throw new Error('Problem is infeasible or unbounded - is it a bug?');
     }
-    const int_pgs = make_int_pgs(lp_result.vars, pg_count, round_robin);
+    const int_pgs = make_int_pgs(lp_result.vars, pg_count, ordered);
     const eff = pg_list_space_efficiency(int_pgs, all_weights, pg_minsize, parity_space);
     const res = {
         score: lp_result.score,
@@ -140,20 +140,20 @@ function make_int_pgs(weights, pg_count, round_robin)
     return int_pgs;
 }
 
-function calc_intersect_weights(pg_size, pg_count, prev_weights, all_pgs)
+function calc_intersect_weights(old_pg_size, pg_size, pg_count, prev_weights, all_pgs, ordered)
 {
     const move_weights = {};
-    if ((1 << pg_size) < pg_count)
+    if ((1 << old_pg_size) < pg_count)
     {
         const intersect = {};
         for (const pg_name in prev_weights)
         {
             const pg = pg_name.substr(3).split(/_/);
-            for (let omit = 1; omit < (1 << pg_size); omit++)
+            for (let omit = 1; omit < (1 << old_pg_size); omit++)
             {
                 let pg_omit = [ ...pg ];
-                let intersect_count = pg_size;
-                for (let i = 0; i < pg_size; i++)
+                let intersect_count = old_pg_size;
+                for (let i = 0; i < old_pg_size; i++)
                 {
                     if (omit & (1 << i))
                     {
@@ -161,6 +161,8 @@ function calc_intersect_weights(pg_size, pg_count, prev_weights, all_pgs)
                         intersect_count--;
                     }
                 }
+                if (!ordered)
+                    pg_omit = pg_omit.filter(n => n).sort();
                 pg_omit = pg_omit.join(':');
                 intersect[pg_omit] = Math.max(intersect[pg_omit] || 0, intersect_count);
             }
@@ -174,10 +176,10 @@ function calc_intersect_weights(pg_size, pg_count, prev_weights, all_pgs)
                 for (let i = 0; i < pg_size; i++)
                 {
                     if (omit & (1 << i))
-                    {
                         pg_omit[i] = '';
-                    }
                 }
+                if (!ordered)
+                    pg_omit = pg_omit.filter(n => n).sort();
                 pg_omit = pg_omit.join(':');
                 max_int = Math.max(max_int, intersect[pg_omit] || 0);
             }
@@ -186,15 +188,18 @@ function calc_intersect_weights(pg_size, pg_count, prev_weights, all_pgs)
     }
     else
     {
-        const prev_pg_hashed = Object.keys(prev_weights).map(pg_name => pg_name.substr(3).split(/_/).reduce((a, c) => { a[c] = 1; return a; }, {}));
+        const prev_pg_hashed = Object.keys(prev_weights).map(pg_name => pg_name
+            .substr(3).split(/_/).reduce((a, c, i) => { a[c] = i+1; return a; }, {}));
         for (const pg of all_pgs)
         {
             if (!prev_weights['pg_'+pg.join('_')])
             {
                 let max_int = 0;
-                for (const prev_hash in prev_pg_hashed)
+                for (const prev_hash of prev_pg_hashed)
                 {
-                    const intersect_count = pg.reduce((a, osd) => a + (prev_hash[osd] ? 1 : 0), 0);
+                    const intersect_count = ordered
+                        ? pg.reduce((a, osd, i) => a + (prev_hash[osd] == 1+i ? 1 : 0), 0)
+                        : pg.reduce((a, osd, i) => a + (prev_hash[osd] ? 1 : 0), 0);
                     if (max_int < intersect_count)
                     {
                         max_int = intersect_count;
@@ -243,7 +248,7 @@ function add_valid_previous(osd_tree, prev_weights, all_pgs)
 }
 
 // Try to minimize data movement
-async function optimize_change({ prev_pgs: prev_int_pgs, osd_tree, pg_size = 3, pg_minsize = 2, max_combinations = 10000, parity_space = 1 })
+async function optimize_change({ prev_pgs: prev_int_pgs, osd_tree, pg_size = 3, pg_minsize = 2, max_combinations = 10000, parity_space = 1, ordered = false })
 {
     if (!osd_tree)
     {
@@ -266,9 +271,13 @@ async function optimize_change({ prev_pgs: prev_int_pgs, osd_tree, pg_size = 3,
             prev_pg_per_osd[osd].push([ pg_name, (i >= pg_minsize ? parity_space : 1) ]);
         }
     }
+    const old_pg_size = prev_int_pgs[0].length;
     // Get all combinations
     let all_pgs = random_combinations(osd_tree, pg_size, max_combinations, parity_space > 1);
-    add_valid_previous(osd_tree, prev_weights, all_pgs);
+    if (old_pg_size == pg_size)
+    {
+        add_valid_previous(osd_tree, prev_weights, all_pgs);
+    }
     all_pgs = Object.values(all_pgs);
     const pg_per_osd = {};
     for (const pg of all_pgs)
@@ -282,7 +291,7 @@ async function optimize_change({ prev_pgs: prev_int_pgs, osd_tree, pg_size = 3,
         }
     }
     // Penalize PGs based on their similarity to old PGs
-    const move_weights = calc_intersect_weights(pg_size, pg_count, prev_weights, all_pgs);
+    const move_weights = calc_intersect_weights(old_pg_size, pg_size, pg_count, prev_weights, all_pgs, ordered);
     // Calculate total weight - old PG weights
     const all_pg_names = all_pgs.map(pg => 'pg_'+pg.join('_'));
     const all_pgs_hash = all_pg_names.reduce((a, c) => { a[c] = true; return a; }, {});
@@ -373,11 +382,35 @@ async function optimize_change({ prev_pgs: prev_int_pgs, osd_tree, pg_size = 3,
         {
             differs++;
         }
-        for (let j = 0; j < pg_size; j++)
+    }
+    if (ordered)
+    {
+        for (let i = 0; i < pg_count; i++)
         {
-            if (new_pgs[i][j] != prev_int_pgs[i][j])
+            for (let j = 0; j < pg_size; j++)
             {
-                osd_differs++;
+                if (new_pgs[i][j] != prev_int_pgs[i][j])
+                {
+                    osd_differs++;
+                }
+            }
+        }
+    }
+    else
+    {
+        for (let i = 0; i < pg_count; i++)
+        {
+            const old_map = prev_int_pgs[i].reduce((a, c) => { a[c] = (a[c]|0) + 1; return a; }, {});
+            for (let j = 0; j < pg_size; j++)
+            {
+                if ((0|old_map[new_pgs[i][j]]) > 0)
+                {
+                    old_map[new_pgs[i][j]]--;
+                }
+                else
+                {
+                    osd_differs++;
+                }
             }
         }
     }

mon/make-osd-hybrid.js

@@ -0,0 +1,414 @@
+#!/usr/bin/nodejs
+// systemd unit generator for hybrid (HDD+SSD) vitastor OSDs
+// Copyright (c) Vitaliy Filippov, 2019+
+// License: VNPL-1.1
+
+// USAGE: nodejs make-osd-hybrid.js [--disable_ssd_cache 0] [--disable_hdd_cache 0] /dev/sda /dev/sdb /dev/sdc /dev/sdd ...
+// I.e. - just pass all HDDs and SSDs mixed, the script will decide where
+// to put journals on its own
+
+const fs = require('fs');
+const fsp = fs.promises;
+const child_process = require('child_process');
+
+const options = {
+    debug: 1,
+    journal_size: 1024*1024*1024,
+    min_meta_size: 1024*1024*1024,
+    object_size: 1024*1024,
+    bitmap_granularity: 4096,
+    device_block_size: 4096,
+    disable_ssd_cache: 1,
+    disable_hdd_cache: 1,
+};
+
+run().catch(console.fatal);
+
+async function run()
+{
+    const device_list = parse_options();
+    await system_or_die("mkdir -p /var/log/vitastor; chown vitastor /var/log/vitastor");
+    // Collect devices
+    const all_devices = await collect_devices(device_list);
+    const ssds = all_devices.filter(d => d.ssd);
+    const hdds = all_devices.filter(d => !d.ssd);
+    // Collect existing OSD units
+    const osd_units = await collect_osd_units();
+    // Count assigned HDD journals and unallocated space for each SSD
+    await check_journal_count(ssds, osd_units);
+    // Create new OSDs
+    await create_new_hybrid_osds(hdds, ssds, osd_units);
+    process.exit(0);
+}
+
+function parse_options()
+{
+    const devices = [];
+    const opt = {};
+    for (let i = 2; i < process.argv.length; i++)
+    {
+        const arg = process.argv[i];
+        if (arg == '--help' || arg == '-h')
+        {
+            opt.help = true;
+            break;
+        }
+        else if (arg.substr(0, 2) == '--')
+            opt[arg.substr(2)] = process.argv[++i];
+        else
+            devices.push(arg);
+    }
+    if (opt.help || !devices.length)
+    {
+        console.log(
+            'Prepare hybrid (HDD+SSD) Vitastor OSDs\n'+
+            '(c) Vitaliy Filippov, 2019+, license: VNPL-1.1\n\n'+
+            'USAGE: nodejs make-osd-hybrid.js [OPTIONS] /dev/sda /dev/sdb /dev/sdc ...\n'+
+            'Just pass all your SSDs and HDDs in any order, the script will distribute OSDs for you.\n\n'+
+            'OPTIONS (with defaults):\n'+
+            Object.keys(options).map(k => `  --${k} ${options[k]}`).join('\n')
+        );
+        process.exit(0);
+    }
+    for (const k in opt)
+        options[k] = opt[k];
+    return devices;
+}
+
+// Collect devices
+async function collect_devices(devices_to_check)
+{
+    const devices = [];
+    for (const dev of devices_to_check)
+    {
+        if (dev.substr(0, 5) != '/dev/')
+        {
+            console.log(`${dev} does not start with /dev/, skipping`);
+            continue;
+        }
+        if (!await file_exists('/sys/block/'+dev.substr(5)))
+        {
+            console.log(`${dev} is a partition, skipping`);
+            continue;
+        }
+        // Check if the device is an SSD
+        const rot = '/sys/block/'+dev.substr(5)+'/queue/rotational';
+        if (!await file_exists(rot))
+        {
+            console.log(`${dev} does not have ${rot} to check whether it's an SSD, skipping`);
+            continue;
+        }
+        const ssd = !parseInt(await fsp.readFile(rot, { encoding: 'utf-8' }));
+        // Check if the device has partition table
+        let [ has_partition_table, parts ] = await system(`sfdisk --dump ${dev} --json`);
+        if (has_partition_table != 0)
+        {
+            // Check if the device has any data
+            const [ has_data, out ] = await system(`blkid ${dev}`);
+            if (has_data == 0)
+            {
+                console.log(`${dev} contains data, skipping:\n  ${out.trim().replace(/\n/g, '\n  ')}`);
+                continue;
+            }
+        }
+        parts = parts ? JSON.parse(parts).partitiontable : null;
+        if (parts && parts.label != 'gpt')
+        {
+            console.log(`${dev} contains "${parts.label}" partition table, only GPT is supported, skipping`);
+            continue;
+        }
+        devices.push({
+            path: dev,
+            ssd,
+            parts,
+        });
+    }
+    return devices;
+}
+
+// Collect existing OSD units
+async function collect_osd_units()
+{
+    const units = [];
+    for (const unit of (await system("ls /etc/systemd/system/vitastor-osd*.service"))[1].trim().split('\n'))
+    {
+        if (!unit)
+        {
+            continue;
+        }
+        let cmd = /^ExecStart\s*=\s*(([^\n]*\\\n)*[^\n]*)/.exec(await fsp.readFile(unit, { encoding: 'utf-8' }));
+        if (!cmd)
+        {
+            console.log('ExecStart= not found in '+unit+', skipping')
+            continue;
+        }
+        let kv = {}, key;
+        cmd = cmd[1].replace(/^bash\s+-c\s+'/, '')
+            .replace(/>>\s*\S+2>\s*&1\s*'$/, '')
+            .replace(/\s*\\\n\s*/g, ' ')
+            .replace(/([^\s']+)|'([^']+)'/g, (m, m1, m2) =>
+            {
+                m1 = m1||m2;
+                if (key == null)
+                {
+                    if (m1.substr(0, 2) != '--')
+                    {
+                        console.log('Strange command line in '+unit+', stopping');
+                        process.exit(1);
+                    }
+                    key = m1.substr(2);
+                }
+                else
+                {
+                    kv[key] = m1;
+                    key = null;
+                }
+            });
+        units.push(kv);
+    }
+    return units;
+}
+
+// Count assigned HDD journals and unallocated space for each SSD
+async function check_journal_count(ssds, osd_units)
+{
+    const units_by_journal = osd_units.reduce((a, c) =>
+    {
+        if (c.journal_device)
+            a[c.journal_device] = c;
+        return a;
+    }, {});
+    for (const dev of ssds)
+    {
+        dev.journals = 0;
+        if (dev.parts)
+        {
+            for (const part of dev.parts.partitions)
+            {
+                if (part.uuid && units_by_journal['/dev/disk/by-partuuid/'+part.uuid.toLowerCase()])
+                {
+                    dev.journals++;
+                }
+            }
+            dev.free = free_from_parttable(dev.parts);
+        }
+        else
+        {
+            dev.free = parseInt(await system_or_die("blockdev --getsize64 "+dev.path));
+        }
+    }
+}
+
+async function create_new_hybrid_osds(hdds, ssds, osd_units)
+{
+    const units_by_disk = osd_units.reduce((a, c) => { a[c.data_device] = c; return a; }, {});
+    for (const dev of hdds)
+    {
+        if (!dev.parts)
+        {
+            // HDD is not partitioned yet, create a single partition
+            // + is the "default value" for sfdisk
+            await system_or_die('sfdisk '+dev.path, 'label: gpt\n\n+ +\n');
+            dev.parts = JSON.parse(await system_or_die('sfdisk --dump '+dev.path+' --json')).partitiontable;
+        }
+        if (dev.parts.partitions.length != 1)
+        {
+            console.log(dev.path+' has more than 1 partition, skipping');
+        }
+        else if ((dev.parts.partitions[0].start + dev.parts.partitions[0].size) != (1 + dev.parts.lastlba))
+        {
+            console.log(dev.path+'1 is not a whole-disk partition, skipping');
+        }
+        else if (!dev.parts.partitions[0].uuid)
+        {
+            console.log(dev.parts.partitions[0].node+' does not have UUID. Please repartition '+dev.path+' with GPT');
+        }
+        else if (!units_by_disk['/dev/disk/by-partuuid/'+dev.parts.partitions[0].uuid.toLowerCase()])
+        {
+            await create_hybrid_osd(dev, ssds);
+        }
+    }
+}
+
+async function create_hybrid_osd(dev, ssds)
+{
+    // Create a new OSD
+    // Calculate metadata size
+    const data_device = '/dev/disk/by-partuuid/'+dev.parts.partitions[0].uuid.toLowerCase();
+    const data_size = dev.parts.partitions[0].size * dev.parts.sectorsize;
+    const meta_entry_size = 24 + 2*options.object_size/options.bitmap_granularity/8;
+    const entries_per_block = Math.floor(options.device_block_size / meta_entry_size);
+    const object_count = Math.floor(data_size / options.object_size);
+    let meta_size = Math.ceil(1 + object_count / entries_per_block) * options.device_block_size;
+    // Leave some extra space for future metadata formats and round metadata area size to multiples of 1 MB
+    meta_size = 2*meta_size;
+    meta_size = Math.ceil(meta_size/1024/1024) * 1024*1024;
+    if (meta_size < options.min_meta_size)
+        meta_size = options.min_meta_size;
+    let journal_size = Math.ceil(options.journal_size/1024/1024) * 1024*1024;
+    // Pick an SSD for journal, balancing the number of journals across SSDs
+    let selected_ssd;
+    for (const ssd of ssds)
+        if (ssd.free >= (meta_size+journal_size) && (!selected_ssd || selected_ssd.journals > ssd.journals))
+            selected_ssd = ssd;
+    if (!selected_ssd)
+    {
+        console.error('Could not find free space for SSD journal and metadata for '+dev.path);
+        process.exit(1);
+    }
+    // Allocate an OSD number
+    const osd_num = (await system_or_die("vitastor-cli alloc-osd")).trim();
+    if (!osd_num)
+    {
+        console.error('Failed to run vitastor-cli alloc-osd');
+        process.exit(1);
+    }
+    console.log('Creating OSD '+osd_num+' on '+dev.path+' (HDD) with journal and metadata on '+selected_ssd.path+' (SSD)');
+    // Add two partitions: journal and metadata
+    const new_parts = await add_partitions(selected_ssd, [ journal_size, meta_size ]);
+    selected_ssd.journals++;
+    const journal_device = '/dev/disk/by-partuuid/'+new_parts[0].uuid.toLowerCase();
+    const meta_device = '/dev/disk/by-partuuid/'+new_parts[1].uuid.toLowerCase();
+    // Wait until the device symlinks appear
+    while (!await file_exists(journal_device))
+    {
+        await new Promise(ok => setTimeout(ok, 100));
+    }
+    while (!await file_exists(meta_device))
+    {
+        await new Promise(ok => setTimeout(ok, 100));
+    }
+    // Zero out metadata and journal
+    await system_or_die("dd if=/dev/zero of="+journal_device+" bs=1M count="+(journal_size/1024/1024)+" oflag=direct");
+    await system_or_die("dd if=/dev/zero of="+meta_device+" bs=1M count="+(meta_size/1024/1024)+" oflag=direct");
+    // Create unit file for the OSD
+    const has_scsi_cache_type = options.disable_ssd_cache &&
+        (await system("ls /sys/block/"+selected_ssd.path.substr(5)+"/device/scsi_disk/*/cache_type"))[0] == 0;
+    const write_through = options.disable_ssd_cache && (
+        has_scsi_cache_type || selected_ssd.path.substr(5, 4) == 'nvme'
+        && (await system_or_die("/sys/block/"+selected_ssd.path.substr(5)+"/queue/write_cache")).trim() == "write through");
+    await fsp.writeFile('/etc/systemd/system/vitastor-osd'+osd_num+'.service',
+`[Unit]
+Description=Vitastor object storage daemon osd.${osd_num}
+After=network-online.target local-fs.target time-sync.target
+Wants=network-online.target local-fs.target time-sync.target
+PartOf=vitastor.target
+
+[Service]
+LimitNOFILE=1048576
+LimitNPROC=1048576
+LimitMEMLOCK=infinity
+ExecStart=bash -c '/usr/bin/vitastor-osd \\
+    --osd_num ${osd_num} ${write_through
+        ? "--disable_meta_fsync 1 --disable_journal_fsync 1 --immediate_commit "+(options.disable_hdd_cache ? "all" : "small")
+        : ""} \\
+    --throttle_small_writes 1 \\
+    --disk_alignment ${options.device_block_size} \\
+    --journal_block_size ${options.device_block_size} \\
+    --meta_block_size ${options.device_block_size} \\
+    --journal_no_same_sector_overwrites true \\
+    --journal_sector_buffer_count 1024 \\
+    --block_size ${options.object_size} \\
+    --data_device ${data_device} \\
+    --journal_device ${journal_device} \\
+    --meta_device ${meta_device} >>/var/log/vitastor/osd${osd_num}.log 2>&1'
+WorkingDirectory=/
+ExecStartPre=+chown vitastor:vitastor ${data_device}
+ExecStartPre=+chown vitastor:vitastor ${journal_device}
+ExecStartPre=+chown vitastor:vitastor ${meta_device}${
+    has_scsi_cache_type
+    ? "\nExecStartPre=+bash -c 'D=$$$(readlink "+journal_device+"); echo write through > $$$(dirname /sys/block/*/$$\${D##*/})/device/scsi_disk/*/cache_type'"
+    : ""}${
+    options.disable_hdd_cache
+    ? "\nExecStartPre=+bash -c 'D=$$$(readlink "+data_device+"); echo write through > $$$(dirname /sys/block/*/$$\${D##*/})/device/scsi_disk/*/cache_type'"
+    : ""}
+User=vitastor
+PrivateTmp=false
+TasksMax=infinity
+Restart=always
+StartLimitInterval=0
+RestartSec=10
+
+[Install]
+WantedBy=vitastor.target
+`);
+    await system_or_die("systemctl enable vitastor-osd"+osd_num);
+}
+
+async function add_partitions(dev, sizes)
+{
+    let script = 'label: gpt\n\n';
+    if (dev.parts)
+    {
+        // Old partitions
+        for (const part of dev.parts.partitions)
+        {
+            script += part.node+': '+Object.keys(part).map(k => k == 'node' ? '' : k+'='+part[k]).filter(k => k).join(', ')+'\n';
+        }
+    }
+    // New partitions
+    for (const size of sizes)
+    {
+        script += '+ '+Math.ceil(size/1024)+'KiB\n';
+    }
+    await system_or_die('sfdisk '+dev.path, script);
+    // Get new partition table and find the new partition
+    const newpt = JSON.parse(await system_or_die('sfdisk --dump '+dev.path+' --json')).partitiontable;
+    const old_nodes = dev.parts ? dev.parts.partitions.reduce((a, c) => { a[c.uuid] = true; return a; }, {}) : {};
+    const new_nodes = newpt.partitions.filter(part => !old_nodes[part.uuid]);
+    if (new_nodes.length != sizes.length)
+    {
+        console.error('Failed to partition '+dev.path+': new partitions not found in table');
+        process.exit(1);
+    }
+    dev.parts = newpt;
+    dev.free = free_from_parttable(newpt);
+    return new_nodes;
+}
+
+function free_from_parttable(pt)
+{
+    let free = pt.lastlba + 1 - pt.firstlba;
+    for (const part of pt.partitions)
+    {
+        free -= part.size;
+    }
+    free *= pt.sectorsize;
+    return free;
+}
+
+async function system_or_die(cmd, input = '')
+{
+    let [ exitcode, stdout, stderr ] = await system(cmd, input);
+    if (exitcode != 0)
+    {
+        console.error(cmd+' failed: '+stderr);
+        process.exit(1);
+    }
+    return stdout;
+}
+
+async function system(cmd, input = '')
+{
+    if (options.debug)
+    {
+        process.stderr.write('+ '+cmd+(input ? " <<EOF\n"+input.replace(/\s*$/, '\n')+"EOF" : '')+'\n');
+    }
+    const cp = child_process.spawn(cmd, { shell: true });
+    let stdout = '', stderr = '', finish_cb;
+    cp.stdout.on('data', buf => stdout += buf.toString());
+    cp.stderr.on('data', buf => stderr += buf.toString());
+    cp.on('exit', () => finish_cb && finish_cb());
+    cp.stdin.write(input);
+    cp.stdin.end();
+    if (cp.exitCode == null)
+    {
+        await new Promise(ok => finish_cb = ok);
+    }
+    return [ cp.exitCode, stdout, stderr ];
+}
+
+async function file_exists(filename)
+{
+    return new Promise((ok, no) => fs.access(filename, fs.constants.R_OK, err => ok(!err)));
+}

mon/make-osd.sh

@@ -25,6 +25,10 @@ OPT=$(vitastor-cli simple-offsets --format options $DEV | tr '\n' ' ')
 META=$(vitastor-cli simple-offsets --format json $DEV | jq .data_offset)
 dd if=/dev/zero of=$DEV bs=1048576 count=$(((META+1048575)/1048576)) oflag=direct
 
+mkdir -p /var/log/vitastor
+id vitastor &>/dev/null || useradd vitastor
+chown vitastor /var/log/vitastor
+
 cat >/etc/systemd/system/vitastor-osd$OSD_NUM.service <<EOF
 [Unit]
 Description=Vitastor object storage daemon osd.$OSD_NUM
@@ -36,14 +40,14 @@ PartOf=vitastor.target
 LimitNOFILE=1048576
 LimitNPROC=1048576
 LimitMEMLOCK=infinity
-ExecStart=/usr/bin/vitastor-osd \\
+ExecStart=bash -c '/usr/bin/vitastor-osd \\
     --osd_num $OSD_NUM \\
     --disable_data_fsync 1 \\
     --immediate_commit all \\
     --disk_alignment 4096 --journal_block_size 4096 --meta_block_size 4096 \\
     --journal_no_same_sector_overwrites true \\
     --journal_sector_buffer_count 1024 \\
-    $OPT
+    $OPT >>/var/log/vitastor/osd$OSD_NUM.log 2>&1'
 WorkingDirectory=/
 ExecStartPre=+chown vitastor:vitastor $DEV
 User=vitastor

mon/mon.js

@@ -31,6 +31,7 @@ const etcd_allow = new RegExp('^'+[
     'osd/inodestats/[1-9]\\d*',
     'osd/space/[1-9]\\d*',
     'mon/master',
+    'mon/member/[a-f0-9]+',
     'pg/state/[1-9]\\d*/[1-9]\\d*',
     'pg/stats/[1-9]\\d*/[1-9]\\d*',
     'pg/history/[1-9]\\d*/[1-9]\\d*',
@@ -83,8 +84,13 @@ const etcd_tree = {
             osd_idle_timeout: 5, // seconds. min: 1
             osd_ping_timeout: 5, // seconds. min: 1
             up_wait_retry_interval: 500, // ms. min: 50
+            max_etcd_attempts: 5,
+            etcd_quick_timeout: 1000, // ms
+            etcd_slow_timeout: 5000, // ms
+            etcd_keepalive_timeout: 30, // seconds, default is max(30, etcd_report_interval*2)
+            etcd_ws_keepalive_interval: 30, // seconds
             // osd
-            etcd_report_interval: 5,
+            etcd_report_interval: 5, // seconds
             run_primary: true,
             osd_network: null, // "192.168.7.0/24" or an array of masks
             bind_address: "0.0.0.0",
@@ -99,6 +105,7 @@ const etcd_tree = {
             no_rebalance: false,
             print_stats_interval: 3,
             slow_log_interval: 10,
+            osd_memlock: false,
             // blockstore - fixed in superblock
             block_size,
             disk_alignment,
@@ -125,6 +132,11 @@ const etcd_tree = {
             inmemory_journal,
             journal_sector_buffer_count,
             journal_no_same_sector_overwrites,
+            throttle_small_writes: false,
+            throttle_target_iops: 100,
+            throttle_target_mbs: 100,
+            throttle_target_parallelism: 1,
+            throttle_threshold_us: 50,
         }, */
         global: {},
         /* node_placement: {
@@ -212,21 +224,28 @@ const etcd_tree = {
             }, */
         },
         inodestats: {
-            /* <inode_t>: {
-                read: { count: uint64_t, usec: uint64_t, bytes: uint64_t },
-                write: { count: uint64_t, usec: uint64_t, bytes: uint64_t },
-                delete: { count: uint64_t, usec: uint64_t, bytes: uint64_t },
+            /* <pool_id>: {
+                <inode_t>: {
+                    read: { count: uint64_t, usec: uint64_t, bytes: uint64_t },
+                    write: { count: uint64_t, usec: uint64_t, bytes: uint64_t },
+                    delete: { count: uint64_t, usec: uint64_t, bytes: uint64_t },
+                },
             }, */
         },
         space: {
             /* <osd_num_t>: {
-                <inode_t>: uint64_t, // bytes
+                <pool_id>: {
+                    <inode_t>: uint64_t, // bytes
+                },
             }, */
         },
     },
     mon: {
         master: {
-            /* ip: [ string ], */
+            /* ip: [ string ], id: uint64_t */
+        },
+        standby: {
+            /* <uint64_t>: { ip: [ string ] }, */
         },
     },
     pg: {
@@ -257,7 +276,7 @@ const etcd_tree = {
                 <pg_id>: {
                     osd_sets: osd_num_t[][],
                     all_peers: osd_num_t[],
-                    epoch: uint32_t,
+                    epoch: uint64_t,
                 },
             }, */
         },
@@ -341,6 +360,9 @@ class Mon
         this.etcd_start_timeout = (config.etcd_start_timeout || 5) * 1000;
         this.state = JSON.parse(JSON.stringify(this.constructor.etcd_tree));
         this.signals_set = false;
+        this.ws = null;
+        this.ws_alive = false;
+        this.ws_keepalive_timer = null;
         this.on_stop_cb = () => this.on_stop(0).catch(console.error);
     }
 
@@ -383,7 +405,7 @@ class Mon
         for (const pool_id in this.state.config.pools)
         {
             if (!this.state.pool.stats[pool_id] ||
-                !this.state.pool.stats[pool_id].pg_real_size)
+                !Number(this.state.pool.stats[pool_id].pg_real_size))
             {
                 // Generate missing data in etcd
                 this.state.config.pgs.hash = null;
@@ -461,8 +483,20 @@ class Mon
 
     restart_watcher(cur_addr)
     {
+        if (this.ws)
+        {
+            this.ws.close();
+            this.ws = null;
+        }
+        if (this.ws_keepalive_timer)
+        {
+            clearInterval(this.ws_keepalive_timer);
+            this.ws_keepalive_timer = null;
+        }
         if (this.selected_etcd_url == cur_addr)
+        {
             this.selected_etcd_url = null;
+        }
         this.start_watcher(this.config.etcd_mon_retries).catch(this.die);
     }
 
@@ -482,6 +516,7 @@ class Mon
                 const timer_id = setTimeout(() =>
                 {
                     this.ws.close();
+                    this.ws = null;
                     ok(false);
                 }, this.config.etcd_mon_timeout);
                 this.ws = new WebSocket(base+'/watch');
@@ -510,6 +545,20 @@ class Mon
             this.die('Failed to open etcd watch websocket');
         }
         const cur_addr = this.selected_etcd_url;
+        this.ws_alive = true;
+        this.ws_keepalive_timer = setInterval(() =>
+        {
+            if (this.ws_alive)
+            {
+                this.ws_alive = false;
+                this.ws.send(JSON.stringify({ progress_request: {} }));
+            }
+            else
+            {
+                console.log('etcd websocket timed out, restarting it');
+                this.restart_watcher(cur_addr);
+            }
+        }, (Number(this.config.etcd_keepalive_interval) || 30)*1000);
         this.ws.on('error', () => this.restart_watcher(cur_addr));
         this.ws.send(JSON.stringify({
             create_request: {
@@ -522,6 +571,7 @@ class Mon
         }));
         this.ws.on('message', (msg) =>
         {
+            this.ws_alive = true;
             let data;
             try
             {
@@ -558,7 +608,7 @@ class Mon
                     console.log('Revision '+data.result.header.revision+' events: ');
                 }
                 this.etcd_watch_revision = BigInt(data.result.header.revision)+BigInt(1);
-                for (const e of data.result.events)
+                for (const e of data.result.events||[])
                 {
                     this.parse_kv(e.kv);
                     const key = e.kv.key.substr(this.etcd_prefix.length);
@@ -631,11 +681,25 @@ class Mon
         }, this.etcd_start_timeout, 0);
     }
 
+    get_mon_state()
+    {
+        return { ip: this.local_ips(), hostname: os.hostname() };
+    }
+
     async get_lease()
     {
         const max_ttl = this.config.etcd_mon_ttl + this.config.etcd_mon_timeout/1000*this.config.etcd_mon_retries;
-        const res = await this.etcd_call('/lease/grant', { TTL: max_ttl }, this.config.etcd_mon_timeout, -1);
+        // Get lease
+        let res = await this.etcd_call('/lease/grant', { TTL: max_ttl }, this.config.etcd_mon_timeout, -1);
         this.etcd_lease_id = res.ID;
+        // Register in /mon/member, just for the information
+        const state = this.get_mon_state();
+        res = await this.etcd_call('/kv/put', {
+            key: b64(this.etcd_prefix+'/mon/member/'+this.etcd_lease_id),
+            value: b64(JSON.stringify(state)),
+            lease: ''+this.etcd_lease_id
+        }, this.etcd_start_timeout, 0);
+        // Set refresh timer
         this.lease_timer = setInterval(async () =>
         {
             const res = await this.etcd_call('/lease/keepalive', { ID: this.etcd_lease_id }, this.config.etcd_mon_timeout, this.config.etcd_mon_retries);
@@ -661,7 +725,7 @@ class Mon
 
     async become_master()
     {
-        const state = { ip: this.local_ips() };
+        const state = { ...this.get_mon_state(), id: ''+this.etcd_lease_id };
         while (1)
         {
             const res = await this.etcd_call('/kv/txn', {
@@ -1097,7 +1161,7 @@ class Mon
                     pg_size: pool_cfg.pg_size,
                     pg_minsize: pool_cfg.pg_minsize,
                     max_combinations: pool_cfg.max_osd_combinations,
-                    round_robin: pool_cfg.scheme != 'replicated',
+                    ordered: pool_cfg.scheme != 'replicated',
                 };
                 let optimize_result;
                 if (old_pg_count > 0)
@@ -1120,10 +1184,6 @@ class Mon
                         {
                             pg.push(0);
                         }
-                        while (pg.length > pool_cfg.pg_size)
-                        {
-                            pg.pop();
-                        }
                     }
                     if (!this.state.config.pgs.hash)
                     {
@@ -1159,8 +1219,8 @@ class Mon
                 this.state.pool.stats[pool_id] = {
                     used_raw_tb: (this.state.pool.stats[pool_id]||{}).used_raw_tb || 0,
                     total_raw_tb: optimize_result.space,
-                    pg_real_size: pg_effsize,
-                    raw_to_usable: pg_effsize / (pool_cfg.scheme === 'replicated'
+                    pg_real_size: pg_effsize || pool_cfg.pg_size,
+                    raw_to_usable: (pg_effsize || pool_cfg.pg_size) / (pool_cfg.scheme === 'replicated'
                         ? 1 : (pool_cfg.pg_size - (pool_cfg.parity_chunks||0))),
                     space_efficiency: optimize_result.space/(optimize_result.total_space||1),
                 };
@@ -1307,21 +1367,30 @@ class Mon
         const tm = prev_stats ? BigInt(timestamp - prev_stats.timestamp) : 0;
         for (const op in op_stats)
         {
-            op_stats[op].bps = prev_stats ? (op_stats[op].bytes - prev_stats.op_stats[op].bytes) * 1000n / tm : 0;
-            op_stats[op].iops = prev_stats ? (op_stats[op].count - prev_stats.op_stats[op].count) * 1000n / tm : 0;
-            op_stats[op].lat = prev_stats ? (op_stats[op].usec - prev_stats.op_stats[op].usec)
-                / ((op_stats[op].count - prev_stats.op_stats[op].count) || 1n) : 0;
+            if (prev_stats && prev_stats.op_stats && prev_stats.op_stats[op])
+            {
+                op_stats[op].bps = (op_stats[op].bytes - prev_stats.op_stats[op].bytes) * 1000n / tm;
+                op_stats[op].iops = (op_stats[op].count - prev_stats.op_stats[op].count) * 1000n / tm;
+                op_stats[op].lat = (op_stats[op].usec - prev_stats.op_stats[op].usec)
+                    / ((op_stats[op].count - prev_stats.op_stats[op].count) || 1n);
+            }
         }
         for (const op in subop_stats)
         {
-            subop_stats[op].iops = prev_stats ? (subop_stats[op].count - prev_stats.subop_stats[op].count) * 1000n / tm : 0;
-            subop_stats[op].lat = prev_stats ? (subop_stats[op].usec - prev_stats.subop_stats[op].usec)
-                / ((subop_stats[op].count - prev_stats.subop_stats[op].count) || 1n) : 0;
+            if (prev_stats && prev_stats.subop_stats && prev_stats.subop_stats[op])
+            {
+                subop_stats[op].iops = (subop_stats[op].count - prev_stats.subop_stats[op].count) * 1000n / tm;
+                subop_stats[op].lat = (subop_stats[op].usec - prev_stats.subop_stats[op].usec)
+                    / ((subop_stats[op].count - prev_stats.subop_stats[op].count) || 1n);
+            }
         }
         for (const op in recovery_stats)
         {
-            recovery_stats[op].bps = prev_stats ? (recovery_stats[op].bytes - prev_stats.recovery_stats[op].bytes) * 1000n / tm : 0;
-            recovery_stats[op].iops = prev_stats ? (recovery_stats[op].count - prev_stats.recovery_stats[op].count) * 1000n / tm : 0;
+            if (prev_stats && prev_stats.recovery_stats && prev_stats.recovery_stats[op])
+            {
+                recovery_stats[op].bps = (recovery_stats[op].bytes - prev_stats.recovery_stats[op].bytes) * 1000n / tm;
+                recovery_stats[op].iops = (recovery_stats[op].count - prev_stats.recovery_stats[op].count) * 1000n / tm;
+            }
         }
         return { op_stats, subop_stats, recovery_stats };
     }

mon/simple-offsets.js

@@ -49,7 +49,8 @@ async function run()
     }
     options.journal_offset = Math.ceil(options.journal_offset/options.device_block_size)*options.device_block_size;
     const meta_offset = options.journal_offset + Math.ceil(options.journal_size/options.device_block_size)*options.device_block_size;
-    const entries_per_block = Math.floor(options.device_block_size / (24 + 2*options.object_size/options.bitmap_granularity/8));
+    const meta_entry_size = 24 + 2*options.object_size/options.bitmap_granularity/8;
+    const entries_per_block = Math.floor(options.device_block_size / meta_entry_size);
     const object_count = Math.floor((device_size-meta_offset)/options.object_size);
     const meta_size = Math.ceil(1 + object_count / entries_per_block) * options.device_block_size;
     const data_offset = meta_offset + meta_size;

mon/test-optimize-simple.js

@@ -5,21 +5,45 @@ const LPOptimizer = require('./lp-optimizer.js');
 
 async function run()
 {
-    const osd_tree = { a: { 1: 1 }, b: { 2: 1 }, c: { 3: 1 } };
+    const osd_tree = {
+        100: { 1: 1 },
+        200: { 2: 1 },
+        300: { 3: 1 },
+    };
+
     let res;
 
     console.log('16 PGs, size=3');
-    res = await LPOptimizer.optimize_initial({ osd_tree, pg_size: 3, pg_count: 16 });
+    res = await LPOptimizer.optimize_initial({ osd_tree, pg_size: 3, pg_count: 16, ordered: false });
     LPOptimizer.print_change_stats(res, false);
-
-    console.log('\nReduce PG size to 2');
-    res = await LPOptimizer.optimize_change({ prev_pgs: res.int_pgs.map(pg => pg.slice(0, 2)), osd_tree, pg_size: 2 });
+    assert(res.space == 3, 'Initial distribution');
+    console.log('\nChange size to 2');
+    res = await LPOptimizer.optimize_change({ prev_pgs: res.int_pgs, osd_tree, pg_size: 2, ordered: false });
     LPOptimizer.print_change_stats(res, false);
-
+    assert(res.space >= 3*14/16 && res.osd_differs == 0, 'Redistribution');
     console.log('\nRemove OSD 3');
-    delete osd_tree['c'];
-    res = await LPOptimizer.optimize_change({ prev_pgs: res.int_pgs, osd_tree, pg_size: 2 });
+    const no3_tree = { ...osd_tree };
+    delete no3_tree['300'];
+    res = await LPOptimizer.optimize_change({ prev_pgs: res.int_pgs, osd_tree: no3_tree, pg_size: 2, ordered: false });
     LPOptimizer.print_change_stats(res, false);
+    assert(res.space == 2, 'Redistribution after OSD removal');
+
+    console.log('\n16 PGs, size=3, ordered');
+    res = await LPOptimizer.optimize_initial({ osd_tree, pg_size: 3, pg_count: 16, ordered: true });
+    LPOptimizer.print_change_stats(res, false);
+    assert(res.space == 3, 'Initial distribution');
+    console.log('\nChange size to 2, ordered');
+    res = await LPOptimizer.optimize_change({ prev_pgs: res.int_pgs, osd_tree, pg_size: 2, ordered: true });
+    LPOptimizer.print_change_stats(res, false);
+    assert(res.space >= 3*14/16 && res.osd_differs < 8, 'Redistribution');
+}
+
+function assert(cond, txt)
+{
+    if (!cond)
+    {
+        throw new Error((txt||'test')+' failed');
+    }
 }
 
 run().catch(console.error);

mon/test-optimize-undersized.js

@@ -45,30 +45,45 @@ async function run()
     console.log('Empty tree:');
     let res = await LPOptimizer.optimize_initial({ osd_tree: cur_tree, pg_size: 3, pg_count: 256 });
     LPOptimizer.print_change_stats(res, false);
+    assert(res.space == 0);
     console.log('\nAdding 1st failure domain:');
     cur_tree['dom1'] = osd_tree['dom1'];
     res = await LPOptimizer.optimize_change({ prev_pgs: res.int_pgs, osd_tree: cur_tree, pg_size: 3 });
     LPOptimizer.print_change_stats(res, false);
+    assert(res.space == 12 && res.total_space == 12);
     console.log('\nAdding 2nd failure domain:');
     cur_tree['dom2'] = osd_tree['dom2'];
     res = await LPOptimizer.optimize_change({ prev_pgs: res.int_pgs, osd_tree: cur_tree, pg_size: 3 });
     LPOptimizer.print_change_stats(res, false);
+    assert(res.space == 24 && res.total_space == 24);
     console.log('\nAdding 3rd failure domain:');
     cur_tree['dom3'] = osd_tree['dom3'];
     res = await LPOptimizer.optimize_change({ prev_pgs: res.int_pgs, osd_tree: cur_tree, pg_size: 3 });
     LPOptimizer.print_change_stats(res, false);
+    assert(res.space == 36 && res.total_space == 36);
     console.log('\nRemoving 3rd failure domain:');
     delete cur_tree['dom3'];
     res = await LPOptimizer.optimize_change({ prev_pgs: res.int_pgs, osd_tree: cur_tree, pg_size: 3 });
     LPOptimizer.print_change_stats(res, false);
+    assert(res.space == 24 && res.total_space == 24);
     console.log('\nRemoving 2nd failure domain:');
     delete cur_tree['dom2'];
     res = await LPOptimizer.optimize_change({ prev_pgs: res.int_pgs, osd_tree: cur_tree, pg_size: 3 });
     LPOptimizer.print_change_stats(res, false);
+    assert(res.space == 12 && res.total_space == 12);
     console.log('\nRemoving 1st failure domain:');
     delete cur_tree['dom1'];
     res = await LPOptimizer.optimize_change({ prev_pgs: res.int_pgs, osd_tree: cur_tree, pg_size: 3 });
     LPOptimizer.print_change_stats(res, false);
+    assert(res.space == 0);
+}
+
+function assert(cond, txt)
+{
+    if (!cond)
+    {
+        throw new Error((txt||'test')+' failed');
+    }
 }
 
 run().catch(console.error);

patches/cinder-vitastor.py

@@ -50,7 +50,7 @@ from cinder.volume import configuration
 from cinder.volume import driver
 from cinder.volume import volume_utils
 
-VERSION = '0.6.11'
+VERSION = '0.6.17'
 
 LOG = logging.getLogger(__name__)
 
@@ -355,7 +355,25 @@ class VitastorDriver(driver.CloneableImageVD,
     def revert_to_snapshot(self, context, volume, snapshot):
         """Revert a volume to a given snapshot."""
 
-        # FIXME Delete the image, then recreate it from the snapshot
+        vol_name = utils.convert_str(snapshot.volume_name)
+        snap_name = utils.convert_str(snapshot.name)
+
+        # Delete the image and recreate it from the snapshot
+        args = [ 'vitastor-cli', 'rm', vol_name, *(self._vitastor_args()) ]
+        try:
+            self._execute(*args)
+        except processutils.ProcessExecutionError as exc:
+            LOG.error("Failed to delete image "+vol_name+": "+exc)
+            raise exception.VolumeBackendAPIException(data = exc.stderr)
+        args = [
+            'vitastor-cli', 'create', '--parent', vol_name+'@'+snap_name,
+            vol_name, *(self._vitastor_args())
+        ]
+        try:
+            self._execute(*args)
+        except processutils.ProcessExecutionError as exc:
+            LOG.error("Failed to recreate image "+vol_name+" from "+vol_name+"@"+snap_name+": "+exc)
+            raise exception.VolumeBackendAPIException(data = exc.stderr)
 
     def delete_snapshot(self, snapshot):
         """Deletes a snapshot."""
@@ -363,24 +381,15 @@ class VitastorDriver(driver.CloneableImageVD,
         vol_name = utils.convert_str(snapshot.volume_name)
         snap_name = utils.convert_str(snapshot.name)
 
-        # Find the snapshot
-        resp = self._etcd_txn({ 'success': [
-            { 'request_range': { 'key': 'index/image/'+vol_name+'@'+snap_name } },
-        ] })
-        if len(resp['responses'][0]['kvs']) == 0:
-            raise exception.SnapshotNotFound(snapshot_id = snap_name)
-        inode_id = int(resp['responses'][0]['kvs'][0]['value']['id'])
-        pool_id = int(resp['responses'][0]['kvs'][0]['value']['pool_id'])
-        parents = {}
-        parents[(pool_id << 48) | (inode_id & 0xffffffffffff)] = True
-
-        # Check if there are child volumes
-        children = self._child_count(parents)
-        if children > 0:
-            raise exception.SnapshotIsBusy(snapshot_name = snap_name)
-
-        # FIXME: We can't delete snapshots because we can't merge layers yet
-        raise exception.VolumeBackendAPIException(data = 'Snapshot delete (layer merge) is not implemented yet')
+        args = [
+            'vitastor-cli', 'rm', vol_name+'@'+snap_name,
+            *(self._vitastor_args())
+        ]
+        try:
+            self._execute(*args)
+        except processutils.ProcessExecutionError as exc:
+            LOG.error("Failed to remove snapshot "+vol_name+'@'+snap_name+": "+exc)
+            raise exception.VolumeBackendAPIException(data = exc.stderr)
 
     def _child_count(self, parents):
         children = 0

rpm/build-tarball.sh

@@ -25,4 +25,4 @@ rm fio
 mv fio-copy fio
 FIO=`rpm -qi fio | perl -e 'while(<>) { /^Epoch[\s:]+(\S+)/ && print "$1:"; /^Version[\s:]+(\S+)/ && print $1; /^Release[\s:]+(\S+)/ && print "-$1"; }'`
 perl -i -pe 's/(Requires:\s*fio)([^\n]+)?/$1 = '$FIO'/' $VITASTOR/rpm/vitastor-el$EL.spec
-tar --transform 's#^#vitastor-0.6.11/#' --exclude 'rpm/*.rpm' -czf $VITASTOR/../vitastor-0.6.11$(rpm --eval '%dist').tar.gz *
+tar --transform 's#^#vitastor-0.6.17/#' --exclude 'rpm/*.rpm' -czf $VITASTOR/../vitastor-0.6.17$(rpm --eval '%dist').tar.gz *

rpm/vitastor-el7.Dockerfile

@@ -34,7 +34,7 @@ ADD . /root/vitastor
 RUN set -e; \
     cd /root/vitastor/rpm; \
     sh build-tarball.sh; \
-    cp /root/vitastor-0.6.11.el7.tar.gz ~/rpmbuild/SOURCES; \
+    cp /root/vitastor-0.6.17.el7.tar.gz ~/rpmbuild/SOURCES; \
     cp vitastor-el7.spec ~/rpmbuild/SPECS/vitastor.spec; \
     cd ~/rpmbuild/SPECS/; \
     rpmbuild -ba vitastor.spec; \

rpm/vitastor-el7.spec

@@ -1,11 +1,11 @@
 Name:           vitastor
-Version:        0.6.11
+Version:        0.6.17
 Release:        1%{?dist}
 Summary:        Vitastor, a fast software-defined clustered block storage
 
 License:        Vitastor Network Public License 1.1
 URL:            https://vitastor.io/
-Source0:        vitastor-0.6.11.el7.tar.gz
+Source0:        vitastor-0.6.17.el7.tar.gz
 
 BuildRequires:  liburing-devel >= 0.6
 BuildRequires:  gperftools-devel

rpm/vitastor-el8.Dockerfile

@@ -33,7 +33,7 @@ ADD . /root/vitastor
 RUN set -e; \
     cd /root/vitastor/rpm; \
     sh build-tarball.sh; \
-    cp /root/vitastor-0.6.11.el8.tar.gz ~/rpmbuild/SOURCES; \
+    cp /root/vitastor-0.6.17.el8.tar.gz ~/rpmbuild/SOURCES; \
     cp vitastor-el8.spec ~/rpmbuild/SPECS/vitastor.spec; \
     cd ~/rpmbuild/SPECS/; \
     rpmbuild -ba vitastor.spec; \

rpm/vitastor-el8.spec

@@ -1,11 +1,11 @@
 Name:           vitastor
-Version:        0.6.11
+Version:        0.6.17
 Release:        1%{?dist}
 Summary:        Vitastor, a fast software-defined clustered block storage
 
 License:        Vitastor Network Public License 1.1
 URL:            https://vitastor.io/
-Source0:        vitastor-0.6.11.el8.tar.gz
+Source0:        vitastor-0.6.17.el8.tar.gz
 
 BuildRequires:  liburing-devel >= 0.6
 BuildRequires:  gperftools-devel

src/CMakeLists.txt

@@ -15,7 +15,7 @@ if("${CMAKE_INSTALL_PREFIX}" MATCHES "^/usr/local/?$")
 	set(CMAKE_INSTALL_RPATH "${CMAKE_INSTALL_PREFIX}/${CMAKE_INSTALL_LIBDIR}")
 endif()
 
-add_definitions(-DVERSION="0.6.11")
+add_definitions(-DVERSION="0.6.17")
 add_definitions(-Wall -Wno-sign-compare -Wno-comment -Wno-parentheses -Wno-pointer-arith -fdiagnostics-color=always -I ${CMAKE_SOURCE_DIR}/src)
 if (${WITH_ASAN})
 	add_definitions(-fsanitize=address -fno-omit-frame-pointer)
@@ -154,8 +154,8 @@ target_link_libraries(vitastor-nbd
 
 # vitastor-cli
 add_executable(vitastor-cli
-	cli.cpp cli_alloc_osd.cpp cli_simple_offsets.cpp cli_df.cpp
-	cli_ls.cpp cli_create.cpp cli_modify.cpp cli_flatten.cpp cli_merge.cpp cli_rm.cpp cli_snap_rm.cpp
+	cli.cpp cli_alloc_osd.cpp cli_simple_offsets.cpp cli_status.cpp cli_df.cpp
+	cli_ls.cpp cli_create.cpp cli_modify.cpp cli_flatten.cpp cli_merge.cpp cli_rm_data.cpp cli_rm.cpp
 )
 target_link_libraries(vitastor-cli
 	vitastor_client

src/addr_util.cpp

@@ -1,4 +1,9 @@
+#include <sys/socket.h>
+#include <unistd.h>
 #include <arpa/inet.h>
+#include <net/if.h>
+#include <sys/types.h>
+#include <ifaddrs.h>
 #include <string.h>
 #include <stdio.h>
 
@@ -6,7 +11,7 @@
 
 #include "addr_util.h"
 
-bool string_to_addr(std::string str, bool parse_port, int default_port, struct sockaddr *addr)
+bool string_to_addr(std::string str, bool parse_port, int default_port, struct sockaddr_storage *addr)
 {
     if (parse_port)
     {
@@ -22,7 +27,7 @@ bool string_to_addr(std::string str, bool parse_port, int default_port, struct s
     }
     if (inet_pton(AF_INET, str.c_str(), &((struct sockaddr_in*)addr)->sin_addr) == 1)
     {
-        addr->sa_family = AF_INET;
+        addr->ss_family = AF_INET;
         ((struct sockaddr_in*)addr)->sin_port = htons(default_port);
         return true;
     }
@@ -30,31 +35,204 @@ bool string_to_addr(std::string str, bool parse_port, int default_port, struct s
         str = str.substr(1, str.length()-2);
     if (inet_pton(AF_INET6, str.c_str(), &((struct sockaddr_in6*)addr)->sin6_addr) == 1)
     {
-        addr->sa_family = AF_INET6;
+        addr->ss_family = AF_INET6;
         ((struct sockaddr_in6*)addr)->sin6_port = htons(default_port);
         return true;
     }
     return false;
 }
 
-std::string addr_to_string(const sockaddr &addr)
+std::string addr_to_string(const sockaddr_storage &addr)
 {
     char peer_str[256];
     bool ok = false;
     int port;
-    if (addr.sa_family == AF_INET)
+    if (addr.ss_family == AF_INET)
     {
         ok = !!inet_ntop(AF_INET, &((sockaddr_in*)&addr)->sin_addr, peer_str, 256);
         port = ntohs(((sockaddr_in*)&addr)->sin_port);
     }
-    else if (addr.sa_family == AF_INET6)
+    else if (addr.ss_family == AF_INET6)
     {
         ok = !!inet_ntop(AF_INET6, &((sockaddr_in6*)&addr)->sin6_addr, peer_str, 256);
         port = ntohs(((sockaddr_in6*)&addr)->sin6_port);
     }
     else
-        throw std::runtime_error("Unknown address family "+std::to_string(addr.sa_family));
+        throw std::runtime_error("Unknown address family "+std::to_string(addr.ss_family));
     if (!ok)
         throw std::runtime_error(std::string("inet_ntop: ") + strerror(errno));
     return std::string(peer_str)+":"+std::to_string(port);
 }
+
+static bool cidr_match(const in_addr &addr, const in_addr &net, uint8_t bits)
+{
+    if (bits == 0)
+    {
+        // C99 6.5.7 (3): u32 << 32 is undefined behaviour
+        return true;
+    }
+    return !((addr.s_addr ^ net.s_addr) & htonl(0xFFFFFFFFu << (32 - bits)));
+}
+
+static bool cidr6_match(const in6_addr &address, const in6_addr &network, uint8_t bits)
+{
+    const uint32_t *a = address.s6_addr32;
+    const uint32_t *n = network.s6_addr32;
+    int bits_whole, bits_incomplete;
+    bits_whole = bits >> 5;         // number of whole u32
+    bits_incomplete = bits & 0x1F;  // number of bits in incomplete u32
+    if (bits_whole && memcmp(a, n, bits_whole << 2))
+        return false;
+    if (bits_incomplete)
+    {
+        uint32_t mask = htonl((0xFFFFFFFFu) << (32 - bits_incomplete));
+        if ((a[bits_whole] ^ n[bits_whole]) & mask)
+            return false;
+    }
+    return true;
+}
+
+struct addr_mask_t
+{
+    sa_family_t family;
+    in_addr ipv4;
+    in6_addr ipv6;
+    uint8_t bits;
+};
+
+std::vector<std::string> getifaddr_list(std::vector<std::string> mask_cfg, bool include_v6)
+{
+    std::vector<addr_mask_t> masks;
+    for (auto mask: mask_cfg)
+    {
+        unsigned bits = 0;
+        int p = mask.find('/');
+        if (p != std::string::npos)
+        {
+            char null_byte = 0;
+            if (sscanf(mask.c_str()+p+1, "%u%c", &bits, &null_byte) != 1 || bits > 128)
+            {
+                throw std::runtime_error((include_v6 ? "Invalid IPv4 address mask: " : "Invalid IP address mask: ") + mask);
+            }
+            mask = mask.substr(0, p);
+        }
+        in_addr ipv4;
+        in6_addr ipv6;
+        if (inet_pton(AF_INET, mask.c_str(), &ipv4) == 1)
+        {
+            if (bits > 32)
+            {
+                throw std::runtime_error((include_v6 ? "Invalid IPv4 address mask: " : "Invalid IP address mask: ") + mask);
+            }
+            masks.push_back((addr_mask_t){ .family = AF_INET, .ipv4 = ipv4, .bits = (uint8_t)bits });
+        }
+        else if (include_v6 && inet_pton(AF_INET6, mask.c_str(), &ipv6) == 1)
+        {
+            masks.push_back((addr_mask_t){ .family = AF_INET6, .ipv6 = ipv6, .bits = (uint8_t)bits });
+        }
+        else
+        {
+            throw std::runtime_error((include_v6 ? "Invalid IPv4 address mask: " : "Invalid IP address mask: ") + mask);
+        }
+    }
+    std::vector<std::string> addresses;
+    ifaddrs *list, *ifa;
+    if (getifaddrs(&list) == -1)
+    {
+        throw std::runtime_error(std::string("getifaddrs: ") + strerror(errno));
+    }
+    for (ifa = list; ifa != NULL; ifa = ifa->ifa_next)
+    {
+        if (!ifa->ifa_addr)
+        {
+            continue;
+        }
+        int family = ifa->ifa_addr->sa_family;
+        if ((family == AF_INET || family == AF_INET6 && include_v6) &&
+            (ifa->ifa_flags & (IFF_UP | IFF_RUNNING | IFF_LOOPBACK)) == (IFF_UP | IFF_RUNNING))
+        {
+            void *addr_ptr;
+            if (family == AF_INET)
+            {
+                addr_ptr = &((sockaddr_in *)ifa->ifa_addr)->sin_addr;
+            }
+            else
+            {
+                addr_ptr = &((sockaddr_in6 *)ifa->ifa_addr)->sin6_addr;
+            }
+            if (masks.size() > 0)
+            {
+                int i;
+                for (i = 0; i < masks.size(); i++)
+                {
+                    if (masks[i].family == family && (family == AF_INET
+                        ? cidr_match(*(in_addr*)addr_ptr, masks[i].ipv4, masks[i].bits)
+                        : cidr6_match(*(in6_addr*)addr_ptr, masks[i].ipv6, masks[i].bits)))
+                    {
+                        break;
+                    }
+                }
+                if (i >= masks.size())
+                {
+                    continue;
+                }
+            }
+            char addr[INET6_ADDRSTRLEN];
+            if (!inet_ntop(family, addr_ptr, addr, INET6_ADDRSTRLEN))
+            {
+                throw std::runtime_error(std::string("inet_ntop: ") + strerror(errno));
+            }
+            addresses.push_back(std::string(addr));
+        }
+    }
+    freeifaddrs(list);
+    return addresses;
+}
+
+int create_and_bind_socket(std::string bind_address, int bind_port, int listen_backlog, int *listening_port)
+{
+    sockaddr_storage addr;
+    if (!string_to_addr(bind_address, 0, bind_port, &addr))
+    {
+        throw std::runtime_error("bind address "+bind_address+" is not valid");
+    }
+
+    int listen_fd = socket(addr.ss_family, SOCK_STREAM, 0);
+    if (listen_fd < 0)
+    {
+        throw std::runtime_error(std::string("socket: ") + strerror(errno));
+    }
+    int enable = 1;
+    setsockopt(listen_fd, SOL_SOCKET, SO_REUSEADDR, &enable, sizeof(enable));
+
+    if (bind(listen_fd, (sockaddr*)&addr, sizeof(addr)) < 0)
+    {
+        close(listen_fd);
+        throw std::runtime_error(std::string("bind: ") + strerror(errno));
+    }
+    if (listening_port)
+    {
+        if (bind_port == 0)
+        {
+            socklen_t len = sizeof(addr);
+            if (getsockname(listen_fd, (sockaddr *)&addr, &len) == -1)
+            {
+                close(listen_fd);
+                throw std::runtime_error(std::string("getsockname: ") + strerror(errno));
+            }
+            *listening_port = ntohs(((sockaddr_in*)&addr)->sin_port);
+        }
+        else
+        {
+            *listening_port = bind_port;
+        }
+    }
+
+    if (listen(listen_fd, listen_backlog ? listen_backlog : 128) < 0)
+    {
+        close(listen_fd);
+        throw std::runtime_error(std::string("listen: ") + strerror(errno));
+    }
+
+    return listen_fd;
+}

src/addr_util.h

@@ -2,6 +2,9 @@
 
 #include <sys/socket.h>
 #include <string>
+#include <vector>
 
-bool string_to_addr(std::string str, bool parse_port, int default_port, struct sockaddr *addr);
-std::string addr_to_string(const sockaddr &addr);
+bool string_to_addr(std::string str, bool parse_port, int default_port, struct sockaddr_storage *addr);
+std::string addr_to_string(const sockaddr_storage &addr);
+std::vector<std::string> getifaddr_list(std::vector<std::string> mask_cfg = std::vector<std::string>(), bool include_v6 = false);
+int create_and_bind_socket(std::string bind_address, int bind_port, int listen_backlog, int *listening_port);

src/allocator.cpp

@@ -25,7 +25,7 @@ allocator::allocator(uint64_t blocks)
     size = free = blocks;
     last_one_mask = (blocks % 64) == 0
         ? UINT64_MAX
-        : ((1l << (blocks % 64)) - 1);
+        : (((uint64_t)1 << (blocks % 64)) - 1);
     for (uint64_t i = 0; i < total; i++)
     {
         mask[i] = 0;
@@ -79,7 +79,7 @@ void allocator::set(uint64_t addr, bool value)
             }
             if (value)
             {
-                mask[last] = mask[last] | (1l << bit);
+                mask[last] = mask[last] | ((uint64_t)1 << bit);
                 if (mask[last] != (!is_last || cur_addr/64 < size/64
                     ? UINT64_MAX : last_one_mask))
                 {
@@ -88,7 +88,7 @@ void allocator::set(uint64_t addr, bool value)
             }
             else
             {
-                mask[last] = mask[last] & ~(1l << bit);
+                mask[last] = mask[last] & ~((uint64_t)1 << bit);
             }
             is_last = false;
             if (p2 > 1)

src/blockstore.h

@@ -21,7 +21,7 @@
 // Memory alignment for direct I/O (usually 512 bytes)
 // All other alignments must be a multiple of this one
 #ifndef MEM_ALIGNMENT
-#define MEM_ALIGNMENT 512
+#define MEM_ALIGNMENT 4096
 #endif
 
 // Default block size is 128 KB, current allowed range is 4K - 128M

src/blockstore_flush.cpp

@@ -185,7 +185,7 @@ void journal_flusher_t::release_trim()
 void journal_flusher_t::dump_diagnostics()
 {
     const char *unflushable_type = "";
-    obj_ver_id unflushable = { 0 };
+    obj_ver_id unflushable = {};
     // Try to find out if there is a flushable object for information
     for (object_id cur_oid: flush_queue)
     {
@@ -415,8 +415,11 @@ stop_flusher:
         flusher->active_flushers++;
 resume_1:
         // Find it in clean_db
-        clean_it = bs->clean_db.find(cur.oid);
-        old_clean_loc = (clean_it != bs->clean_db.end() ? clean_it->second.location : UINT64_MAX);
+        {
+            auto & clean_db = bs->clean_db_shard(cur.oid);
+            auto clean_it = clean_db.find(cur.oid);
+            old_clean_loc = (clean_it != clean_db.end() ? clean_it->second.location : UINT64_MAX);
+        }
         // Scan dirty versions of the object
         if (!scan_dirty(1))
         {
@@ -486,8 +489,8 @@ resume_1:
         if (bs->clean_entry_bitmap_size)
         {
             new_clean_bitmap = (bs->inmemory_meta
-                ? meta_new.buf + meta_new.pos*bs->clean_entry_size + sizeof(clean_disk_entry)
-                : bs->clean_bitmap + (clean_loc >> bs->block_order)*(2*bs->clean_entry_bitmap_size));
+                ? (uint8_t*)meta_new.buf + meta_new.pos*bs->clean_entry_size + sizeof(clean_disk_entry)
+                : (uint8_t*)bs->clean_bitmap + (clean_loc >> bs->block_order)*(2*bs->clean_entry_bitmap_size));
             if (clean_init_bitmap)
             {
                 memset(new_clean_bitmap, 0, bs->clean_entry_bitmap_size);
@@ -533,7 +536,7 @@ resume_1:
                 return false;
             }
             // zero out old metadata entry
-            memset(meta_old.buf + meta_old.pos*bs->clean_entry_size, 0, bs->clean_entry_size);
+            memset((uint8_t*)meta_old.buf + meta_old.pos*bs->clean_entry_size, 0, bs->clean_entry_size);
             await_sqe(15);
             data->iov = (struct iovec){ meta_old.buf, bs->meta_block_size };
             data->callback = simple_callback_w;
@@ -544,7 +547,7 @@ resume_1:
         }
         if (has_delete)
         {
-            clean_disk_entry *new_entry = (clean_disk_entry*)(meta_new.buf + meta_new.pos*bs->clean_entry_size);
+            clean_disk_entry *new_entry = (clean_disk_entry*)((uint8_t*)meta_new.buf + meta_new.pos*bs->clean_entry_size);
             if (new_entry->oid.inode != 0 && new_entry->oid != cur.oid)
             {
                 printf("Fatal error (metadata corruption or bug): tried to delete metadata entry %lu (%lx:%lx v%lu) while deleting %lx:%lx\n",
@@ -553,11 +556,11 @@ resume_1:
                 exit(1);
             }
             // zero out new metadata entry
-            memset(meta_new.buf + meta_new.pos*bs->clean_entry_size, 0, bs->clean_entry_size);
+            memset((uint8_t*)meta_new.buf + meta_new.pos*bs->clean_entry_size, 0, bs->clean_entry_size);
         }
         else
         {
-            clean_disk_entry *new_entry = (clean_disk_entry*)(meta_new.buf + meta_new.pos*bs->clean_entry_size);
+            clean_disk_entry *new_entry = (clean_disk_entry*)((uint8_t*)meta_new.buf + meta_new.pos*bs->clean_entry_size);
             if (new_entry->oid.inode != 0 && new_entry->oid != cur.oid)
             {
                 printf("Fatal error (metadata corruption or bug): tried to overwrite non-zero metadata entry %lu (%lx:%lx v%lu) with %lx:%lx v%lu\n",
@@ -575,7 +578,7 @@ resume_1:
             if (bs->clean_entry_bitmap_size)
             {
                 void *bmp_ptr = bs->clean_entry_bitmap_size > sizeof(void*) ? dirty_end->second.bitmap : &dirty_end->second.bitmap;
-                memcpy((void*)(new_entry+1) + bs->clean_entry_bitmap_size, bmp_ptr, bs->clean_entry_bitmap_size);
+                memcpy((uint8_t*)(new_entry+1) + bs->clean_entry_bitmap_size, bmp_ptr, bs->clean_entry_bitmap_size);
             }
         }
         await_sqe(6);
@@ -762,7 +765,7 @@ bool journal_flusher_co::scan_dirty(int wait_base)
                         if (bs->journal.inmemory)
                         {
                             // Take it from memory
-                            memcpy(it->buf, bs->journal.buffer + submit_offset, submit_len);
+                            memcpy(it->buf, (uint8_t*)bs->journal.buffer + submit_offset, submit_len);
                         }
                         else
                         {
@@ -826,7 +829,7 @@ bool journal_flusher_co::modify_meta_read(uint64_t meta_loc, flusher_meta_write_
     wr.pos = ((meta_loc >> bs->block_order) % (bs->meta_block_size / bs->clean_entry_size));
     if (bs->inmemory_meta)
     {
-        wr.buf = bs->metadata_buffer + wr.sector;
+        wr.buf = (uint8_t*)bs->metadata_buffer + wr.sector;
         return true;
     }
     wr.it = flusher->meta_sectors.find(wr.sector);
@@ -870,10 +873,11 @@ void journal_flusher_co::update_clean_db()
 #endif
         bs->data_alloc->set(old_clean_loc >> bs->block_order, false);
     }
+    auto & clean_db = bs->clean_db_shard(cur.oid);
     if (has_delete)
     {
-        auto clean_it = bs->clean_db.find(cur.oid);
-        bs->clean_db.erase(clean_it);
+        auto clean_it = clean_db.find(cur.oid);
+        clean_db.erase(clean_it);
 #ifdef BLOCKSTORE_DEBUG
         printf("Free block %lu from %lx:%lx v%lu (delete)\n",
             clean_loc >> bs->block_order,
@@ -884,7 +888,7 @@ void journal_flusher_co::update_clean_db()
     }
     else
     {
-        bs->clean_db[cur.oid] = {
+        clean_db[cur.oid] = {
             .version = cur.version,
             .location = clean_loc,
         };

src/blockstore_flush.h

@@ -49,7 +49,6 @@ class journal_flusher_co
     std::function<void(ring_data_t*)> simple_callback_r, simple_callback_w;
 
     bool skip_copy, has_delete, has_writes;
-    blockstore_clean_db_t::iterator clean_it;
     std::vector<copy_buffer_t> v;
     std::vector<copy_buffer_t>::iterator it;
     int copy_count;

src/blockstore_impl.cpp

@@ -118,7 +118,7 @@ void blockstore_impl_t::loop()
         // has_writes == 0 - no writes before the current queue item
         // has_writes == 1 - some writes in progress
         // has_writes == 2 - tried to submit some writes, but failed
-        int has_writes = 0, op_idx = 0, new_idx = 0;
+        int has_writes = 0, op_idx = 0, new_idx = 0, done_lists = 0;
         for (; op_idx < submit_queue.size(); op_idx++, new_idx++)
         {
             auto op = submit_queue[op_idx];
@@ -142,7 +142,6 @@ void blockstore_impl_t::loop()
                     continue;
                 }
             }
-            unsigned ring_space = ringloop->space_left();
             unsigned prev_sqe_pos = ringloop->save();
             // 0 = can't submit
             // 1 = in progress
@@ -199,9 +198,14 @@ void blockstore_impl_t::loop()
             }
             else if (op->opcode == BS_OP_LIST)
             {
-                // LIST doesn't need to be blocked by previous modifications
-                process_list(op);
-                wr_st = 2;
+                // LIST doesn't have to be blocked by previous modifications
+                // But don't do a lot of LISTs at once, because they're blocking and potentially slow
+                if (single_tick_list_limit <= 0 || done_lists < single_tick_list_limit)
+                {
+                    process_list(op);
+                    done_lists++;
+                    wr_st = 2;
+                }
             }
             if (wr_st == 2)
             {
@@ -212,7 +216,6 @@ void blockstore_impl_t::loop()
                 ringloop->restore(prev_sqe_pos);
                 if (PRIV(op)->wait_for == WAIT_SQE)
                 {
-                    PRIV(op)->wait_detail = 1 + ring_space;
                     // ring is full, stop submission
                     break;
                 }
@@ -282,7 +285,7 @@ void blockstore_impl_t::check_wait(blockstore_op_t *op)
 {
     if (PRIV(op)->wait_for == WAIT_SQE)
     {
-        if (ringloop->space_left() < PRIV(op)->wait_detail)
+        if (ringloop->sqes_left() < PRIV(op)->wait_detail)
         {
             // stop submission if there's still no free space
 #ifdef BLOCKSTORE_DEBUG
@@ -372,7 +375,7 @@ void blockstore_impl_t::enqueue_op(blockstore_op_t *op)
                     };
                 }
                 unstable_writes.clear();
-                op->callback = [this, old_callback](blockstore_op_t *op)
+                op->callback = [old_callback](blockstore_op_t *op)
                 {
                     obj_ver_id *vers = (obj_ver_id*)op->buf;
                     delete[] vers;
@@ -425,22 +428,104 @@ static bool replace_stable(object_id oid, uint64_t version, int search_start, in
     return false;
 }
 
+blockstore_clean_db_t& blockstore_impl_t::clean_db_shard(object_id oid)
+{
+    uint64_t pg_num = 0;
+    uint64_t pool_id = (oid.inode >> (64-POOL_ID_BITS));
+    auto sh_it = clean_db_settings.find(pool_id);
+    if (sh_it != clean_db_settings.end())
+    {
+        // like map_to_pg()
+        pg_num = (oid.stripe / sh_it->second.pg_stripe_size) % sh_it->second.pg_count + 1;
+    }
+    return clean_db_shards[(pool_id << (64-POOL_ID_BITS)) | pg_num];
+}
+
+void blockstore_impl_t::reshard_clean_db(pool_id_t pool, uint32_t pg_count, uint32_t pg_stripe_size)
+{
+    uint64_t pool_id = (uint64_t)pool;
+    std::map<pool_pg_id_t, blockstore_clean_db_t> new_shards;
+    auto sh_it = clean_db_shards.lower_bound((pool_id << (64-POOL_ID_BITS)));
+    while (sh_it != clean_db_shards.end() &&
+        (sh_it->first >> (64-POOL_ID_BITS)) == pool_id)
+    {
+        for (auto & pair: sh_it->second)
+        {
+            // like map_to_pg()
+            uint64_t pg_num = (pair.first.stripe / pg_stripe_size) % pg_count + 1;
+            uint64_t shard_id = (pool_id << (64-POOL_ID_BITS)) | pg_num;
+            new_shards[shard_id][pair.first] = pair.second;
+        }
+        clean_db_shards.erase(sh_it++);
+    }
+    for (sh_it = new_shards.begin(); sh_it != new_shards.end(); sh_it++)
+    {
+        auto & to = clean_db_shards[sh_it->first];
+        to.swap(sh_it->second);
+    }
+    clean_db_settings[pool_id] = (pool_shard_settings_t){
+        .pg_count = pg_count,
+        .pg_stripe_size = pg_stripe_size,
+    };
+}
+
 void blockstore_impl_t::process_list(blockstore_op_t *op)
 {
-    uint32_t list_pg = op->offset;
+    uint32_t list_pg = op->offset+1;
     uint32_t pg_count = op->len;
     uint64_t pg_stripe_size = op->oid.stripe;
     uint64_t min_inode = op->oid.inode;
     uint64_t max_inode = op->version;
     // Check PG
-    if (pg_count != 0 && (pg_stripe_size < MIN_BLOCK_SIZE || list_pg >= pg_count))
+    if (pg_count != 0 && (pg_stripe_size < MIN_BLOCK_SIZE || list_pg > pg_count))
     {
         op->retval = -EINVAL;
         FINISH_OP(op);
         return;
     }
-    // Copy clean_db entries (sorted)
-    int stable_count = 0, stable_alloc = clean_db.size() / (pg_count ? pg_count : 1);
+    // Check if the DB needs resharding
+    // (we don't know about PGs from the beginning, we only create "shards" here)
+    uint64_t first_shard = 0, last_shard = UINT64_MAX;
+    if (min_inode != 0 &&
+        // Check if min_inode == max_inode == pool_id<<N, i.e. this is a pool listing
+        (min_inode >> (64-POOL_ID_BITS)) == (max_inode >> (64-POOL_ID_BITS)))
+    {
+        pool_id_t pool_id = (min_inode >> (64-POOL_ID_BITS));
+        if (pg_count > 1)
+        {
+            // Per-pg listing
+            auto sh_it = clean_db_settings.find(pool_id);
+            if (sh_it == clean_db_settings.end() ||
+                sh_it->second.pg_count != pg_count ||
+                sh_it->second.pg_stripe_size != pg_stripe_size)
+            {
+                reshard_clean_db(pool_id, pg_count, pg_stripe_size);
+            }
+            first_shard = last_shard = ((uint64_t)pool_id << (64-POOL_ID_BITS)) | list_pg;
+        }
+        else
+        {
+            // Per-pool listing
+            first_shard = ((uint64_t)pool_id << (64-POOL_ID_BITS));
+            last_shard = ((uint64_t)(pool_id+1) << (64-POOL_ID_BITS)) - 1;
+        }
+    }
+    // Copy clean_db entries
+    int stable_count = 0, stable_alloc = 0;
+    if (min_inode != max_inode)
+    {
+        for (auto shard_it = clean_db_shards.lower_bound(first_shard);
+            shard_it != clean_db_shards.end() && shard_it->first <= last_shard;
+            shard_it++)
+        {
+            auto & clean_db = shard_it->second;
+            stable_alloc += clean_db.size();
+        }
+    }
+    else
+    {
+        stable_alloc = 32768;
+    }
     obj_ver_id *stable = (obj_ver_id*)malloc(sizeof(obj_ver_id) * stable_alloc);
     if (!stable)
     {
@@ -448,7 +533,11 @@ void blockstore_impl_t::process_list(blockstore_op_t *op)
         FINISH_OP(op);
         return;
     }
+    for (auto shard_it = clean_db_shards.lower_bound(first_shard);
+        shard_it != clean_db_shards.end() && shard_it->first <= last_shard;
+        shard_it++)
     {
+        auto & clean_db = shard_it->second;
         auto clean_it = clean_db.begin(), clean_end = clean_db.end();
         if ((min_inode != 0 || max_inode != 0) && min_inode <= max_inode)
         {
@@ -463,26 +552,28 @@ void blockstore_impl_t::process_list(blockstore_op_t *op)
         }
         for (; clean_it != clean_end; clean_it++)
         {
-            if (!pg_count || ((clean_it->first.stripe / pg_stripe_size) % pg_count) == list_pg) // like map_to_pg()
+            if (stable_count >= stable_alloc)
             {
-                if (stable_count >= stable_alloc)
+                stable_alloc *= 2;
+                stable = (obj_ver_id*)realloc(stable, sizeof(obj_ver_id) * stable_alloc);
+                if (!stable)
                 {
-                    stable_alloc += 32768;
-                    stable = (obj_ver_id*)realloc(stable, sizeof(obj_ver_id) * stable_alloc);
-                    if (!stable)
-                    {
-                        op->retval = -ENOMEM;
-                        FINISH_OP(op);
-                        return;
-                    }
+                    op->retval = -ENOMEM;
+                    FINISH_OP(op);
+                    return;
                 }
-                stable[stable_count++] = {
-                    .oid = clean_it->first,
-                    .version = clean_it->second.version,
-                };
             }
+            stable[stable_count++] = {
+                .oid = clean_it->first,
+                .version = clean_it->second.version,
+            };
         }
     }
+    if (first_shard != last_shard)
+    {
+        // If that's not a per-PG listing, sort clean entries
+        std::sort(stable, stable+stable_count);
+    }
     int clean_stable_count = stable_count;
     // Copy dirty_db entries (sorted, too)
     int unstable_count = 0, unstable_alloc = 0;
@@ -508,7 +599,7 @@ void blockstore_impl_t::process_list(blockstore_op_t *op)
         }
         for (; dirty_it != dirty_end; dirty_it++)
         {
-            if (!pg_count || ((dirty_it->first.oid.stripe / pg_stripe_size) % pg_count) == list_pg) // like map_to_pg()
+            if (!pg_count || ((dirty_it->first.oid.stripe / pg_stripe_size) % pg_count + 1) == list_pg) // like map_to_pg()
             {
                 if (IS_DELETE(dirty_it->second.state))
                 {

src/blockstore_impl.h

@@ -55,9 +55,10 @@
 #define IS_DELETE(st) (((st) & 0x0F) == BS_ST_DELETE)
 
 #define BS_SUBMIT_CHECK_SQES(n) \
-    if (ringloop->space_left() < (n))\
+    if (ringloop->sqes_left() < (n))\
     {\
         /* Pause until there are more requests available */\
+        PRIV(op)->wait_detail = (n);\
         PRIV(op)->wait_for = WAIT_SQE;\
         return 0;\
     }
@@ -71,6 +72,7 @@
     if (!sqe)\
     {\
         /* Pause until there are more requests available */\
+        PRIV(op)->wait_detail = 1;\
         PRIV(op)->wait_for = WAIT_SQE;\
         return 0;\
     }
@@ -80,6 +82,7 @@
     if (!sqe)\
     {\
         /* Pause until there are more requests available */\
+        PRIV(op)->wait_detail = 1;\
         PRIV(op)->wait_for = WAIT_SQE;\
         return 0;\
     }
@@ -201,6 +204,17 @@ typedef std::map<obj_ver_id, dirty_entry> blockstore_dirty_db_t;
 
 #include "blockstore_flush.h"
 
+typedef uint32_t pool_id_t;
+typedef uint64_t pool_pg_id_t;
+
+#define POOL_ID_BITS 16
+
+struct pool_shard_settings_t
+{
+    uint32_t pg_count;
+    uint32_t pg_stripe_size;
+};
+
 class blockstore_impl_t
 {
     /******* OPTIONS *******/
@@ -238,11 +252,14 @@ class blockstore_impl_t
     int throttle_target_parallelism = 1;
     // Minimum difference in microseconds between target and real execution times to throttle the response
     int throttle_threshold_us = 50;
+    // Maximum number of LIST operations to be processed between
+    int single_tick_list_limit = 1;
     /******* END OF OPTIONS *******/
 
     struct ring_consumer_t ring_consumer;
 
-    blockstore_clean_db_t clean_db;
+    std::map<pool_id_t, pool_shard_settings_t> clean_db_settings;
+    std::map<pool_pg_id_t, blockstore_clean_db_t> clean_db_shards;
     uint8_t *clean_bitmap = NULL;
     blockstore_dirty_db_t dirty_db;
     std::vector<blockstore_op_t*> submit_queue;
@@ -280,7 +297,7 @@ class blockstore_impl_t
 
     friend class blockstore_init_meta;
     friend class blockstore_init_journal;
-    friend class blockstore_journal_check_t;
+    friend struct blockstore_journal_check_t;
     friend class journal_flusher_t;
     friend class journal_flusher_co;
 
@@ -291,6 +308,9 @@ class blockstore_impl_t
     void open_journal();
     uint8_t* get_clean_entry_bitmap(uint64_t block_loc, int offset);
 
+    blockstore_clean_db_t& clean_db_shard(object_id oid);
+    void reshard_clean_db(pool_id_t pool_id, uint32_t pg_count, uint32_t pg_stripe_size);
+
     // Journaling
     void prepare_journal_sector_write(int sector, blockstore_op_t *op);
     void handle_journal_write(ring_data_t *data, uint64_t flush_id);

src/blockstore_init.cpp

@@ -131,6 +131,7 @@ resume_1:
     }
     // Skip superblock
     bs->meta_offset += bs->meta_block_size;
+    bs->meta_len -= bs->meta_block_size;
     prev_done = 0;
     done_len = 0;
     done_pos = 0;
@@ -148,7 +149,7 @@ resume_1:
         {
             GET_SQE();
             data->iov = {
-                metadata_buffer + (bs->inmemory_meta
+                (uint8_t*)metadata_buffer + (bs->inmemory_meta
                     ? metadata_read
                     : (prev == 1 ? bs->metadata_buf_size : 0)),
                 bs->meta_len - metadata_read > bs->metadata_buf_size ? bs->metadata_buf_size : bs->meta_len - metadata_read,
@@ -169,13 +170,13 @@ resume_1:
         if (prev_done)
         {
             void *done_buf = bs->inmemory_meta
-                ? (metadata_buffer + done_pos)
-                : (metadata_buffer + (prev_done == 2 ? bs->metadata_buf_size : 0));
+                ? ((uint8_t*)metadata_buffer + done_pos)
+                : ((uint8_t*)metadata_buffer + (prev_done == 2 ? bs->metadata_buf_size : 0));
             unsigned count = bs->meta_block_size / bs->clean_entry_size;
             for (int sector = 0; sector < done_len; sector += bs->meta_block_size)
             {
                 // handle <count> entries
-                handle_entries(done_buf + sector, count, bs->block_order);
+                handle_entries((uint8_t*)done_buf + sector, count, bs->block_order);
                 done_cnt += count;
             }
             prev_done = 0;
@@ -215,17 +216,18 @@ void blockstore_init_meta::handle_entries(void* entries, unsigned count, int blo
 {
     for (unsigned i = 0; i < count; i++)
     {
-        clean_disk_entry *entry = (clean_disk_entry*)(entries + i*bs->clean_entry_size);
+        clean_disk_entry *entry = (clean_disk_entry*)((uint8_t*)entries + i*bs->clean_entry_size);
         if (!bs->inmemory_meta && bs->clean_entry_bitmap_size)
         {
             memcpy(bs->clean_bitmap + (done_cnt+i)*2*bs->clean_entry_bitmap_size, &entry->bitmap, 2*bs->clean_entry_bitmap_size);
         }
         if (entry->oid.inode > 0)
         {
-            auto clean_it = bs->clean_db.find(entry->oid);
-            if (clean_it == bs->clean_db.end() || clean_it->second.version < entry->version)
+            auto & clean_db = bs->clean_db_shard(entry->oid);
+            auto clean_it = clean_db.find(entry->oid);
+            if (clean_it == clean_db.end() || clean_it->second.version < entry->version)
             {
-                if (clean_it != bs->clean_db.end())
+                if (clean_it != clean_db.end())
                 {
                     // free the previous block
 #ifdef BLOCKSTORE_DEBUG
@@ -245,7 +247,7 @@ void blockstore_init_meta::handle_entries(void* entries, unsigned count, int blo
                 printf("Allocate block (clean entry) %lu: %lx:%lx v%lu\n", done_cnt+i, entry->oid.inode, entry->oid.stripe, entry->version);
 #endif
                 bs->data_alloc->set(done_cnt+i, true);
-                bs->clean_db[entry->oid] = (struct clean_entry){
+                clean_db[entry->oid] = (struct clean_entry){
                     .version = entry->version,
                     .location = (done_cnt+i) << block_order,
                 };
@@ -440,7 +442,7 @@ resume_1:
                 if (!bs->journal.inmemory)
                     submitted_buf = memalign_or_die(MEM_ALIGNMENT, JOURNAL_BUFFER_SIZE);
                 else
-                    submitted_buf = bs->journal.buffer + journal_pos;
+                    submitted_buf = (uint8_t*)bs->journal.buffer + journal_pos;
                 data->iov = {
                     submitted_buf,
                     end - journal_pos < JOURNAL_BUFFER_SIZE ? end - journal_pos : JOURNAL_BUFFER_SIZE,
@@ -570,7 +572,7 @@ int blockstore_init_journal::handle_journal_part(void *buf, uint64_t done_pos, u
     resume:
         while (pos < bs->journal.block_size)
         {
-            journal_entry *je = (journal_entry*)(buf + proc_pos - done_pos + pos);
+            journal_entry *je = (journal_entry*)((uint8_t*)buf + proc_pos - done_pos + pos);
             if (je->magic != JOURNAL_MAGIC || je_crc32(je) != je->crc32 ||
                 je->type < JE_MIN || je->type > JE_MAX || started && je->crc32_prev != crc32_last)
             {
@@ -619,7 +621,7 @@ int blockstore_init_journal::handle_journal_part(void *buf, uint64_t done_pos, u
                 if (location >= done_pos && location+je->small_write.len <= done_pos+len)
                 {
                     // data is within this buffer
-                    data_crc32 = crc32c(0, buf + location - done_pos, je->small_write.len);
+                    data_crc32 = crc32c(0, (uint8_t*)buf + location - done_pos, je->small_write.len);
                 }
                 else
                 {
@@ -634,7 +636,7 @@ int blockstore_init_journal::handle_journal_part(void *buf, uint64_t done_pos, u
                                 ? location+je->small_write.len : done[i].pos+done[i].len);
                             uint64_t part_begin = (location < done[i].pos ? done[i].pos : location);
                             covered += part_end - part_begin;
-                            data_crc32 = crc32c(data_crc32, done[i].buf + part_begin - done[i].pos, part_end - part_begin);
+                            data_crc32 = crc32c(data_crc32, (uint8_t*)done[i].buf + part_begin - done[i].pos, part_end - part_begin);
                         }
                     }
                     if (covered < je->small_write.len)
@@ -650,14 +652,15 @@ int blockstore_init_journal::handle_journal_part(void *buf, uint64_t done_pos, u
                     // interesting thing is that we must clear the corrupt entry if we're not readonly,
                     // because we don't write next entries in the same journal block
                     printf("Journal entry data is corrupt (data crc32 %x != %x)\n", data_crc32, je->small_write.crc32_data);
-                    memset(buf + proc_pos - done_pos + pos, 0, bs->journal.block_size - pos);
+                    memset((uint8_t*)buf + proc_pos - done_pos + pos, 0, bs->journal.block_size - pos);
                     bs->journal.next_free = prev_free;
-                    init_write_buf = buf + proc_pos - done_pos;
+                    init_write_buf = (uint8_t*)buf + proc_pos - done_pos;
                     init_write_sector = proc_pos;
                     return 0;
                 }
-                auto clean_it = bs->clean_db.find(je->small_write.oid);
-                if (clean_it == bs->clean_db.end() ||
+                auto & clean_db = bs->clean_db_shard(je->small_write.oid);
+                auto clean_it = clean_db.find(je->small_write.oid);
+                if (clean_it == clean_db.end() ||
                     clean_it->second.version < je->small_write.version)
                 {
                     obj_ver_id ov = {
@@ -665,7 +668,7 @@ int blockstore_init_journal::handle_journal_part(void *buf, uint64_t done_pos, u
                         .version = je->small_write.version,
                     };
                     void *bmp = NULL;
-                    void *bmp_from = (void*)je + sizeof(journal_entry_small_write);
+                    void *bmp_from = (uint8_t*)je + sizeof(journal_entry_small_write);
                     if (bs->clean_entry_bitmap_size <= sizeof(void*))
                     {
                         memcpy(&bmp, bmp_from, bs->clean_entry_bitmap_size);
@@ -735,8 +738,9 @@ int blockstore_init_journal::handle_journal_part(void *buf, uint64_t done_pos, u
                         erase_dirty_object(dirty_it);
                     }
                 }
-                auto clean_it = bs->clean_db.find(je->big_write.oid);
-                if (clean_it == bs->clean_db.end() ||
+                auto & clean_db = bs->clean_db_shard(je->big_write.oid);
+                auto clean_it = clean_db.find(je->big_write.oid);
+                if (clean_it == clean_db.end() ||
                     clean_it->second.version < je->big_write.version)
                 {
                     // oid, version, block
@@ -745,7 +749,7 @@ int blockstore_init_journal::handle_journal_part(void *buf, uint64_t done_pos, u
                         .version = je->big_write.version,
                     };
                     void *bmp = NULL;
-                    void *bmp_from = (void*)je + sizeof(journal_entry_big_write);
+                    void *bmp_from = (uint8_t*)je + sizeof(journal_entry_big_write);
                     if (bs->clean_entry_bitmap_size <= sizeof(void*))
                     {
                         memcpy(&bmp, bmp_from, bs->clean_entry_bitmap_size);
@@ -841,8 +845,9 @@ int blockstore_init_journal::handle_journal_part(void *buf, uint64_t done_pos, u
                     dirty_it--;
                     dirty_exists = dirty_it->first.oid == je->del.oid;
                 }
-                auto clean_it = bs->clean_db.find(je->del.oid);
-                bool clean_exists = (clean_it != bs->clean_db.end() &&
+                auto & clean_db = bs->clean_db_shard(je->del.oid);
+                auto clean_it = clean_db.find(je->del.oid);
+                bool clean_exists = (clean_it != clean_db.end() &&
                     clean_it->second.version < je->del.version);
                 if (!clean_exists && dirty_exists)
                 {
@@ -901,8 +906,9 @@ void blockstore_init_journal::erase_dirty_object(blockstore_dirty_db_t::iterator
             break;
         }
     }
-    auto clean_it = bs->clean_db.find(oid);
-    uint64_t clean_loc = clean_it != bs->clean_db.end()
+    auto & clean_db = bs->clean_db_shard(oid);
+    auto clean_it = clean_db.find(oid);
+    uint64_t clean_loc = clean_it != clean_db.end()
         ? clean_it->second.location : UINT64_MAX;
     if (exists && clean_loc == UINT64_MAX)
     {

src/blockstore_init.h

@@ -6,7 +6,7 @@
 class blockstore_init_meta
 {
     blockstore_impl_t *bs;
-    int wait_state = 0, wait_count = 0;
+    int wait_state = 0;
     bool zero_on_init = false;
     void *metadata_buffer = NULL;
     uint64_t metadata_read = 0;

src/blockstore_journal.cpp

@@ -96,7 +96,8 @@ int blockstore_journal_check_t::check_available(blockstore_op_t *op, int entries
         next_pos = next_pos + data_after;
         if (next_pos > bs->journal.len)
         {
-            next_pos = bs->journal.block_size + data_after;
+            if (right_dir)
+                next_pos = bs->journal.block_size + data_after;
             right_dir = false;
         }
     }
@@ -136,13 +137,13 @@ journal_entry* prefill_single_journal_entry(journal_t & journal, uint16_t type,
         journal.in_sector_pos = 0;
         journal.next_free = (journal.next_free+journal.block_size) < journal.len ? journal.next_free + journal.block_size : journal.block_size;
         memset(journal.inmemory
-            ? journal.buffer + journal.sector_info[journal.cur_sector].offset
-            : journal.sector_buf + journal.block_size*journal.cur_sector, 0, journal.block_size);
+            ? (uint8_t*)journal.buffer + journal.sector_info[journal.cur_sector].offset
+            : (uint8_t*)journal.sector_buf + journal.block_size*journal.cur_sector, 0, journal.block_size);
     }
     journal_entry *je = (struct journal_entry*)(
         (journal.inmemory
-            ? journal.buffer + journal.sector_info[journal.cur_sector].offset
-            : journal.sector_buf + journal.block_size*journal.cur_sector) + journal.in_sector_pos
+            ? (uint8_t*)journal.buffer + journal.sector_info[journal.cur_sector].offset
+            : (uint8_t*)journal.sector_buf + journal.block_size*journal.cur_sector) + journal.in_sector_pos
     );
     journal.in_sector_pos += size;
     je->magic = JOURNAL_MAGIC;
@@ -168,8 +169,8 @@ void blockstore_impl_t::prepare_journal_sector_write(int cur_sector, blockstore_
         journal.sector_info[cur_sector].flush_count++;
         data->iov = (struct iovec){
             (journal.inmemory
-                ? journal.buffer + journal.sector_info[cur_sector].offset
-                : journal.sector_buf + journal.block_size*cur_sector),
+                ? (uint8_t*)journal.buffer + journal.sector_info[cur_sector].offset
+                : (uint8_t*)journal.sector_buf + journal.block_size*cur_sector),
             journal.block_size
         };
         data->callback = [this, flush_id = journal.submit_id](ring_data_t *data) { handle_journal_write(data, flush_id); };

src/blockstore_read.cpp

@@ -24,7 +24,7 @@ int blockstore_impl_t::fulfill_read_push(blockstore_op_t *op, void *buf, uint64_
     }
     if (journal.inmemory && IS_JOURNAL(item_state))
     {
-        memcpy(buf, journal.buffer + offset, len);
+        memcpy(buf, (uint8_t*)journal.buffer + offset, len);
         return 1;
     }
     BS_SUBMIT_GET_SQE(sqe, data);
@@ -75,7 +75,7 @@ int blockstore_impl_t::fulfill_read(blockstore_op_t *read_op, uint64_t &fulfille
                 };
                 it = PRIV(read_op)->read_vec.insert(it, el);
                 if (!fulfill_read_push(read_op,
-                    read_op->buf + el.offset - read_op->offset,
+                    (uint8_t*)read_op->buf + el.offset - read_op->offset,
                     item_location + el.offset - item_start,
                     el.len, item_state, item_version))
                 {
@@ -102,7 +102,7 @@ uint8_t* blockstore_impl_t::get_clean_entry_bitmap(uint64_t block_loc, int offse
     {
         uint64_t sector = (meta_loc / (meta_block_size / clean_entry_size)) * meta_block_size;
         uint64_t pos = (meta_loc % (meta_block_size / clean_entry_size));
-        clean_entry_bitmap = (uint8_t*)(metadata_buffer + sector + pos*clean_entry_size + sizeof(clean_disk_entry) + offset);
+        clean_entry_bitmap = ((uint8_t*)metadata_buffer + sector + pos*clean_entry_size + sizeof(clean_disk_entry) + offset);
     }
     else
         clean_entry_bitmap = (uint8_t*)(clean_bitmap + meta_loc*2*clean_entry_bitmap_size + offset);
@@ -111,6 +111,7 @@ uint8_t* blockstore_impl_t::get_clean_entry_bitmap(uint64_t block_loc, int offse
 
 int blockstore_impl_t::dequeue_read(blockstore_op_t *read_op)
 {
+    auto & clean_db = clean_db_shard(read_op->oid);
     auto clean_it = clean_db.find(read_op->oid);
     auto dirty_it = dirty_db.upper_bound((obj_ver_id){
         .oid = read_op->oid,
@@ -297,6 +298,7 @@ int blockstore_impl_t::read_bitmap(object_id oid, uint64_t target_version, void
             dirty_it--;
         }
     }
+    auto & clean_db = clean_db_shard(oid);
     auto clean_it = clean_db.find(oid);
     if (clean_it != clean_db.end())
     {

src/blockstore_stable.cpp

@@ -54,6 +54,7 @@ int blockstore_impl_t::dequeue_stable(blockstore_op_t *op)
         auto dirty_it = dirty_db.find(*v);
         if (dirty_it == dirty_db.end())
         {
+            auto & clean_db = clean_db_shard(v->oid);
             auto clean_it = clean_db.find(v->oid);
             if (clean_it == clean_db.end() || clean_it->second.version < v->version)
             {
@@ -188,6 +189,7 @@ void blockstore_impl_t::mark_stable(const obj_ver_id & v, bool forget_dirty)
                     }
                     if (exists == -1)
                     {
+                        auto & clean_db = clean_db_shard(v.oid);
                         auto clean_it = clean_db.find(v.oid);
                         exists = clean_it != clean_db.end() ? 1 : 0;
                     }
@@ -215,6 +217,7 @@ void blockstore_impl_t::mark_stable(const obj_ver_id & v, bool forget_dirty)
                         break;
                     }
                 }
+                auto & clean_db = clean_db_shard(v.oid);
                 auto clean_it = clean_db.find(v.oid);
                 uint64_t clean_loc = clean_it != clean_db.end()
                     ? clean_it->second.location : UINT64_MAX;

src/blockstore_write.cpp

@@ -41,6 +41,7 @@ bool blockstore_impl_t::enqueue_write(blockstore_op_t *op)
     }
     if (!found)
     {
+        auto & clean_db = clean_db_shard(op->oid);
         auto clean_it = clean_db.find(op->oid);
         if (clean_it != clean_db.end())
         {
@@ -102,7 +103,7 @@ bool blockstore_impl_t::enqueue_write(blockstore_op_t *op)
         // Issue an additional sync so that the previous big write can reach the journal
         blockstore_op_t *sync_op = new blockstore_op_t;
         sync_op->opcode = BS_OP_SYNC;
-        sync_op->callback = [this, op](blockstore_op_t *sync_op)
+        sync_op->callback = [](blockstore_op_t *sync_op)
         {
             delete sync_op;
         };
@@ -380,7 +381,7 @@ int blockstore_impl_t::dequeue_write(blockstore_op_t *op)
             if (journal.inmemory)
             {
                 // Copy data
-                memcpy(journal.buffer + journal.next_free, op->buf, op->len);
+                memcpy((uint8_t*)journal.buffer + journal.next_free, op->buf, op->len);
             }
             BS_SUBMIT_GET_SQE(sqe2, data2);
             data2->iov = (struct iovec){ op->buf, op->len };
@@ -543,12 +544,13 @@ resume_4:
             if (ref_us > exec_us + throttle_threshold_us)
             {
                 // Pause reply
+                PRIV(op)->op_state = 5;
+                // Remember that the timer can in theory be called right here
                 tfd->set_timer_us(ref_us-exec_us, false, [this, op](int timer_id)
                 {
                     PRIV(op)->op_state++;
                     ringloop->wakeup();
                 });
-                PRIV(op)->op_state = 5;
                 return 1;
             }
         }
@@ -629,13 +631,17 @@ int blockstore_impl_t::dequeue_del(blockstore_op_t *op)
     {
         return 0;
     }
-    write_iodepth++;
     // Write current journal sector only if it's dirty and full, or in the immediate_commit mode
     BS_SUBMIT_CHECK_SQES(
         (immediate_commit != IMMEDIATE_NONE ||
             (journal_block_size - journal.in_sector_pos) < sizeof(journal_entry_del) &&
             journal.sector_info[journal.cur_sector].dirty) ? 1 : 0
     );
+    if (write_iodepth >= max_write_iodepth)
+    {
+        return 0;
+    }
+    write_iodepth++;
     // Prepare journal sector write
     if (immediate_commit == IMMEDIATE_NONE)
     {

src/cli.cpp

@@ -86,6 +86,9 @@ void cli_tool_t::help()
         "(c) Vitaliy Filippov, 2019+ (VNPL-1.1)\n"
         "\n"
         "USAGE:\n"
+        "%s status\n"
+        "  Show cluster status\n"
+        "\n"
         "%s df\n"
         "  Show pool space statistics\n"
         "\n"
@@ -155,7 +158,7 @@ void cli_tool_t::help()
         "  --no-color          Disable colored output\n"
         "  --json              JSON output\n"
         ,
-        exe_name, exe_name, exe_name, exe_name, exe_name, exe_name,
+        exe_name, exe_name, exe_name, exe_name, exe_name, exe_name, exe_name,
         exe_name, exe_name, exe_name, exe_name, exe_name, exe_name
     );
     exit(0);
@@ -177,7 +180,7 @@ void cli_tool_t::change_parent(inode_t cur, inode_t new_parent)
     new_cfg.parent_id = new_parent;
     json11::Json::object cur_cfg_json = cli->st_cli.serialize_inode_cfg(&new_cfg);
     waiting++;
-    cli->st_cli.etcd_txn(json11::Json::object {
+    cli->st_cli.etcd_txn_slow(json11::Json::object {
         { "compare", json11::Json::array {
             json11::Json::object {
                 { "target", "MOD" },
@@ -194,7 +197,7 @@ void cli_tool_t::change_parent(inode_t cur, inode_t new_parent)
                 } }
             },
         } },
-    }, ETCD_SLOW_TIMEOUT, [this, new_parent, cur, cur_name](std::string err, json11::Json res)
+    }, [this, new_parent, cur, cur_name](std::string err, json11::Json res)
     {
         if (err != "")
         {
@@ -229,6 +232,22 @@ void cli_tool_t::change_parent(inode_t cur, inode_t new_parent)
     });
 }
 
+void cli_tool_t::etcd_txn(json11::Json txn)
+{
+    waiting++;
+    cli->st_cli.etcd_txn_slow(txn, [this](std::string err, json11::Json res)
+    {
+        waiting--;
+        if (err != "")
+        {
+            fprintf(stderr, "Error reading from etcd: %s\n", err.c_str());
+            exit(1);
+        }
+        etcd_result = res;
+        ringloop->wakeup();
+    });
+}
+
 inode_config_t* cli_tool_t::get_inode_cfg(const std::string & name)
 {
     for (auto & ic: cli->st_cli.inode_config)
@@ -250,6 +269,11 @@ void cli_tool_t::run(json11::Json cfg)
         fprintf(stderr, "command is missing\n");
         exit(1);
     }
+    else if (cmd[0] == "status")
+    {
+        // Show cluster status
+        action_cb = start_status(cfg);
+    }
     else if (cmd[0] == "df")
     {
         // Show pool space stats
@@ -324,6 +348,8 @@ void cli_tool_t::run(json11::Json cfg)
     ringloop = new ring_loop_t(512);
     epmgr = new epoll_manager_t(ringloop);
     cli = new cluster_client_t(ringloop, epmgr->tfd, cfg);
+    // Smaller timeout by default for more interactiveness
+    cli->st_cli.etcd_slow_timeout = cli->st_cli.etcd_quick_timeout;
     cli->on_ready([this]()
     {
         // Initialize job
@@ -349,6 +375,13 @@ void cli_tool_t::run(json11::Json cfg)
         if (action_cb != NULL)
             ringloop->wait();
     }
+    // Destroy the client
+    delete cli;
+    delete epmgr;
+    delete ringloop;
+    cli = NULL;
+    epmgr = NULL;
+    ringloop = NULL;
 }
 
 int main(int narg, const char *args[])
@@ -358,5 +391,6 @@ int main(int narg, const char *args[])
     exe_name = args[0];
     cli_tool_t *p = new cli_tool_t();
     p->run(cli_tool_t::parse_args(narg, args));
+    delete p;
     return 0;
 }

src/cli.h

@@ -34,6 +34,7 @@ public:
     cluster_client_t *cli = NULL;
 
     int waiting = 0;
+    json11::Json etcd_result;
     ring_consumer_t consumer;
     std::function<bool(void)> action_cb;
 
@@ -50,6 +51,7 @@ public:
     friend struct snap_flattener_t;
     friend struct snap_remover_t;
 
+    std::function<bool(void)> start_status(json11::Json cfg);
     std::function<bool(void)> start_df(json11::Json);
     std::function<bool(void)> start_ls(json11::Json);
     std::function<bool(void)> start_create(json11::Json);
@@ -60,13 +62,15 @@ public:
     std::function<bool(void)> start_snap_rm(json11::Json);
     std::function<bool(void)> start_alloc_osd(json11::Json cfg, uint64_t *out = NULL);
     std::function<bool(void)> simple_offsets(json11::Json cfg);
+
+    void etcd_txn(json11::Json txn);
 };
 
 uint64_t parse_size(std::string size_str);
 
 std::string print_table(json11::Json items, json11::Json header, bool use_esc);
 
-std::string format_size(uint64_t size);
+std::string format_size(uint64_t size, bool nobytes = false);
 
 std::string format_lat(uint64_t lat);
 

src/cli_alloc_osd.cpp

@@ -13,7 +13,6 @@ struct alloc_osd_t
 {
     cli_tool_t *parent;
 
-    json11::Json result;
     uint64_t new_id = 1;
 
     int state = 0;
@@ -29,7 +28,7 @@ struct alloc_osd_t
             goto resume_1;
         do
         {
-            etcd_txn(json11::Json::object {
+            parent->etcd_txn(json11::Json::object {
                 { "compare", json11::Json::array {
                     json11::Json::object {
                         { "target", "VERSION" },
@@ -63,10 +62,10 @@ struct alloc_osd_t
             state = 1;
             if (parent->waiting > 0)
                 return;
-            if (!result["succeeded"].bool_value())
+            if (!parent->etcd_result["succeeded"].bool_value())
             {
                 std::vector<osd_num_t> used;
-                for (auto kv: result["responses"][0]["response_range"]["kvs"].array_items())
+                for (auto kv: parent->etcd_result["responses"][0]["response_range"]["kvs"].array_items())
                 {
                     std::string key = base64_decode(kv["key"].string_value());
                     osd_num_t cur_osd;
@@ -98,25 +97,9 @@ struct alloc_osd_t
                     new_id = used[e-1]+1;
                 }
             }
-        } while (!result["succeeded"].bool_value());
+        } while (!parent->etcd_result["succeeded"].bool_value());
         state = 100;
     }
-
-    void etcd_txn(json11::Json txn)
-    {
-        parent->waiting++;
-        parent->cli->st_cli.etcd_txn(txn, ETCD_SLOW_TIMEOUT, [this](std::string err, json11::Json res)
-        {
-            parent->waiting--;
-            if (err != "")
-            {
-                fprintf(stderr, "Error reading from etcd: %s\n", err.c_str());
-                exit(1);
-            }
-            this->result = res;
-            parent->ringloop->wakeup();
-        });
-    }
 };
 
 std::function<bool(void)> cli_tool_t::start_alloc_osd(json11::Json cfg, uint64_t *out)

src/cli_create.cpp

@@ -31,7 +31,6 @@ struct image_creator_t
     inode_t new_parent_id = 0;
     inode_t new_id = 0, old_id = 0;
     uint64_t max_id_mod_rev = 0, cfg_mod_rev = 0, idx_mod_rev = 0;
-    json11::Json result;
 
     int state = 0;
 
@@ -125,26 +124,26 @@ struct image_creator_t
         }
         do
         {
-            etcd_txn(json11::Json::object {
+            parent->etcd_txn(json11::Json::object {
                 { "success", json11::Json::array { get_next_id() } }
             });
             state = 2;
 resume_2:
             if (parent->waiting > 0)
                 return;
-            extract_next_id(result["responses"][0]);
+            extract_next_id(parent->etcd_result["responses"][0]);
             attempt_create();
             state = 3;
 resume_3:
             if (parent->waiting > 0)
                 return;
-            if (!result["succeeded"].bool_value() &&
-                result["responses"][0]["response_range"]["kvs"].array_items().size() > 0)
+            if (!parent->etcd_result["succeeded"].bool_value() &&
+                parent->etcd_result["responses"][0]["response_range"]["kvs"].array_items().size() > 0)
             {
                 fprintf(stderr, "Image %s already exists\n", image_name.c_str());
                 exit(1);
             }
-        } while (!result["succeeded"].bool_value());
+        } while (!parent->etcd_result["succeeded"].bool_value());
         if (parent->progress)
         {
             printf("Image %s created\n", image_name.c_str());
@@ -196,13 +195,13 @@ resume_3:
 resume_4:
             if (parent->waiting > 0)
                 return;
-            if (!result["succeeded"].bool_value() &&
-                result["responses"][0]["response_range"]["kvs"].array_items().size() > 0)
+            if (!parent->etcd_result["succeeded"].bool_value() &&
+                parent->etcd_result["responses"][0]["response_range"]["kvs"].array_items().size() > 0)
             {
                 fprintf(stderr, "Snapshot %s@%s already exists\n", image_name.c_str(), new_snap.c_str());
                 exit(1);
             }
-        } while (!result["succeeded"].bool_value());
+        } while (!parent->etcd_result["succeeded"].bool_value());
         if (parent->progress)
         {
             printf("Snapshot %s@%s created\n", image_name.c_str(), new_snap.c_str());
@@ -246,7 +245,7 @@ resume_4:
             goto resume_2;
         else if (state == 3)
             goto resume_3;
-        etcd_txn(json11::Json::object { { "success", json11::Json::array {
+        parent->etcd_txn(json11::Json::object { { "success", json11::Json::array {
             get_next_id(),
             json11::Json::object {
                 { "request_range", json11::Json::object {
@@ -260,11 +259,11 @@ resume_4:
 resume_2:
         if (parent->waiting > 0)
             return;
-        extract_next_id(result["responses"][0]);
+        extract_next_id(parent->etcd_result["responses"][0]);
         old_id = 0;
         old_pool_id = 0;
         cfg_mod_rev = idx_mod_rev = 0;
-        if (result["responses"][1]["response_range"]["kvs"].array_items().size() == 0)
+        if (parent->etcd_result["responses"][1]["response_range"]["kvs"].array_items().size() == 0)
         {
             for (auto & ic: parent->cli->st_cli.inode_config)
             {
@@ -283,7 +282,7 @@ resume_2:
         {
             // FIXME: Parse kvs in etcd_state_client automatically
             {
-                auto kv = parent->cli->st_cli.parse_etcd_kv(result["responses"][1]["response_range"]["kvs"][0]);
+                auto kv = parent->cli->st_cli.parse_etcd_kv(parent->etcd_result["responses"][1]["response_range"]["kvs"][0]);
                 old_id = INODE_NO_POOL(kv.value["id"].uint64_value());
                 old_pool_id = (pool_id_t)kv.value["pool_id"].uint64_value();
                 idx_mod_rev = kv.mod_revision;
@@ -293,7 +292,7 @@ resume_2:
                     exit(1);
                 }
             }
-            etcd_txn(json11::Json::object {
+            parent->etcd_txn(json11::Json::object {
                 { "success", json11::Json::array {
                     json11::Json::object {
                         { "request_range", json11::Json::object {
@@ -310,7 +309,7 @@ resume_3:
             if (parent->waiting > 0)
                 return;
             {
-                auto kv = parent->cli->st_cli.parse_etcd_kv(result["responses"][0]["response_range"]["kvs"][0]);
+                auto kv = parent->cli->st_cli.parse_etcd_kv(parent->etcd_result["responses"][0]["response_range"]["kvs"][0]);
                 size = kv.value["size"].uint64_value();
                 new_parent_id = kv.value["parent_id"].uint64_value();
                 uint64_t parent_pool_id = kv.value["parent_pool_id"].uint64_value();
@@ -439,28 +438,12 @@ resume_3:
                 } },
             });
         };
-        etcd_txn(json11::Json::object {
+        parent->etcd_txn(json11::Json::object {
             { "compare", checks },
             { "success", success },
             { "failure", failure },
         });
     }
-
-    void etcd_txn(json11::Json txn)
-    {
-        parent->waiting++;
-        parent->cli->st_cli.etcd_txn(txn, ETCD_SLOW_TIMEOUT, [this](std::string err, json11::Json res)
-        {
-            parent->waiting--;
-            if (err != "")
-            {
-                fprintf(stderr, "Error reading from etcd: %s\n", err.c_str());
-                exit(1);
-            }
-            this->result = res;
-            parent->ringloop->wakeup();
-        });
-    }
 };
 
 uint64_t parse_size(std::string size_str)
@@ -474,13 +457,13 @@ uint64_t parse_size(std::string size_str)
     if (type_char == 'k' || type_char == 'm' || type_char == 'g' || type_char == 't')
     {
         if (type_char == 'k')
-            mul = 1l<<10;
+            mul = (uint64_t)1<<10;
         else if (type_char == 'm')
-            mul = 1l<<20;
+            mul = (uint64_t)1<<20;
         else if (type_char == 'g')
-            mul = 1l<<30;
+            mul = (uint64_t)1<<30;
         else /*if (type_char == 't')*/
-            mul = 1l<<40;
+            mul = (uint64_t)1<<40;
         size_str = size_str.substr(0, size_str.length()-1);
     }
     uint64_t size = json11::Json(size_str).uint64_value() * mul;

src/cli_df.cpp

@@ -24,8 +24,7 @@ struct pool_lister_t
         if (state == 1)
             goto resume_1;
         // Space statistics - pool/stats/<pool>
-        parent->waiting++;
-        parent->cli->st_cli.etcd_txn(json11::Json::object {
+        parent->etcd_txn(json11::Json::object {
             { "success", json11::Json::array {
                 json11::Json::object {
                     { "request_range", json11::Json::object {
@@ -48,21 +47,12 @@ struct pool_lister_t
                     } },
                 },
             } },
-        }, ETCD_SLOW_TIMEOUT, [this](std::string err, json11::Json res)
-        {
-            parent->waiting--;
-            if (err != "")
-            {
-                fprintf(stderr, "Error reading from etcd: %s\n", err.c_str());
-                exit(1);
-            }
-            space_info = res;
-            parent->ringloop->wakeup();
         });
         state = 1;
 resume_1:
         if (parent->waiting > 0)
             return;
+        space_info = parent->etcd_result;
         std::map<pool_id_t, uint64_t> osd_free;
         for (auto & kv_item: space_info["responses"][0]["response_range"]["kvs"].array_items())
         {
@@ -118,9 +108,14 @@ resume_1:
                     pool_avail = pg_free;
                 }
             }
+            if (pool_avail == UINT64_MAX)
+            {
+                pool_avail = 0;
+            }
             if (pool_cfg.scheme != POOL_SCHEME_REPLICATED)
             {
-                pool_avail = pool_avail * (pool_cfg.pg_size - pool_cfg.parity_chunks) / pool_stats[pool_cfg.id]["pg_real_size"].uint64_value();
+                uint64_t pg_real_size = pool_stats[pool_cfg.id]["pg_real_size"].uint64_value();
+                pool_avail = pg_real_size > 0 ? pool_avail * (pool_cfg.pg_size - pool_cfg.parity_chunks) / pg_real_size : 0;
             }
             pool_stats[pool_cfg.id] = json11::Json::object {
                 { "name", pool_cfg.name },
@@ -129,8 +124,8 @@ resume_1:
                 { "scheme_name", pool_cfg.scheme == POOL_SCHEME_REPLICATED
                     ? std::to_string(pool_cfg.pg_size)+"/"+std::to_string(pool_cfg.pg_minsize)
                     : "EC "+std::to_string(pool_cfg.pg_size-pool_cfg.parity_chunks)+"+"+std::to_string(pool_cfg.parity_chunks) },
-                { "used_raw", (uint64_t)(pool_stats[pool_cfg.id]["used_raw_tb"].number_value() * (1l<<40)) },
-                { "total_raw", (uint64_t)(pool_stats[pool_cfg.id]["total_raw_tb"].number_value() * (1l<<40)) },
+                { "used_raw", (uint64_t)(pool_stats[pool_cfg.id]["used_raw_tb"].number_value() * ((uint64_t)1<<40)) },
+                { "total_raw", (uint64_t)(pool_stats[pool_cfg.id]["total_raw_tb"].number_value() * ((uint64_t)1<<40)) },
                 { "max_available", pool_avail },
                 { "raw_to_usable", pool_stats[pool_cfg.id]["raw_to_usable"].number_value() },
                 { "space_efficiency", pool_stats[pool_cfg.id]["space_efficiency"].number_value() },
@@ -199,11 +194,16 @@ resume_1:
         json11::Json::array list;
         for (auto & kv: pool_stats)
         {
-            kv.second["total_fmt"] = format_size(kv.second["total_raw"].uint64_value() / kv.second["raw_to_usable"].number_value());
-            kv.second["used_fmt"] = format_size(kv.second["used_raw"].uint64_value() / kv.second["raw_to_usable"].number_value());
+            double raw_to = kv.second["raw_to_usable"].number_value();
+            if (raw_to < 0.000001 && raw_to > -0.000001)
+                raw_to = 1;
+            kv.second["total_fmt"] = format_size(kv.second["total_raw"].uint64_value() / raw_to);
+            kv.second["used_fmt"] = format_size(kv.second["used_raw"].uint64_value() / raw_to);
             kv.second["max_avail_fmt"] = format_size(kv.second["max_available"].uint64_value());
-            kv.second["used_pct"] = format_q(100 - 100*kv.second["max_available"].uint64_value() *
-                kv.second["raw_to_usable"].number_value() / kv.second["total_raw"].uint64_value())+"%";
+            kv.second["used_pct"] = format_q(kv.second["total_raw"].uint64_value()
+                ? (100 - 100*kv.second["max_available"].uint64_value() *
+                    kv.second["raw_to_usable"].number_value() / kv.second["total_raw"].uint64_value())
+                : 100)+"%";
             kv.second["eff_fmt"] = format_q(kv.second["space_efficiency"].number_value()*100)+"%";
         }
         printf("%s", print_table(to_list(), cols, parent->color).c_str());

src/cli_flatten.cpp

@@ -3,6 +3,7 @@
 
 #include "cli.h"
 #include "cluster_client.h"
+#include <sys/stat.h>
 
 // Flatten a layer: merge all parents into a layer and break the connection completely
 struct snap_flattener_t

src/cli_ls.cpp

@@ -84,8 +84,7 @@ struct image_lister_t
         // Space statistics
         // inode/stats/<pool>/<inode>::raw_used divided by pool/stats/<pool>::pg_real_size
         // multiplied by 1 or number of data drives
-        parent->waiting++;
-        parent->cli->st_cli.etcd_txn(json11::Json::object {
+        parent->etcd_txn(json11::Json::object {
             { "success", json11::Json::array {
                 json11::Json::object {
                     { "request_range", json11::Json::object {
@@ -112,21 +111,12 @@ struct image_lister_t
                     } },
                 },
             } },
-        }, ETCD_SLOW_TIMEOUT, [this](std::string err, json11::Json res)
-        {
-            parent->waiting--;
-            if (err != "")
-            {
-                fprintf(stderr, "Error reading from etcd: %s\n", err.c_str());
-                exit(1);
-            }
-            space_info = res;
-            parent->ringloop->wakeup();
         });
         state = 1;
 resume_1:
         if (parent->waiting > 0)
             return;
+        space_info = parent->etcd_result;
         std::map<pool_id_t, uint64_t> pool_pg_real_size;
         for (auto & kv_item: space_info["responses"][0]["response_range"]["kvs"].array_items())
         {
@@ -164,7 +154,7 @@ resume_1:
             if (pool_it != parent->cli->st_cli.pool_config.end())
             {
                 auto & pool_cfg = pool_it->second;
-                used_size = used_size / pool_pg_real_size[pool_id]
+                used_size = used_size / (pool_pg_real_size[pool_id] ? pool_pg_real_size[pool_id] : 1)
                     * (pool_cfg.scheme == POOL_SCHEME_REPLICATED ? 1 : pool_cfg.pg_size-pool_cfg.parity_chunks);
             }
             auto stat_it = stats.find(inode_num);
@@ -446,23 +436,26 @@ std::string print_table(json11::Json items, json11::Json header, bool use_esc)
     return str;
 }
 
-static uint64_t size_thresh[] = { 1024l*1024*1024*1024, 1024l*1024*1024, 1024l*1024, 1024, 0 };
+static uint64_t size_thresh[] = { (uint64_t)1024*1024*1024*1024, (uint64_t)1024*1024*1024, (uint64_t)1024*1024, 1024, 0 };
+static uint64_t size_thresh_d[] = { (uint64_t)1000000000000, (uint64_t)1000000000, (uint64_t)1000000, (uint64_t)1000, 0 };
+static const int size_thresh_n = sizeof(size_thresh)/sizeof(size_thresh[0]);
 static const char *size_unit = "TGMKB";
 
-std::string format_size(uint64_t size)
+std::string format_size(uint64_t size, bool nobytes)
 {
+    uint64_t *thr = nobytes ? size_thresh_d : size_thresh;
     char buf[256];
-    for (int i = 0; i < sizeof(size_thresh)/sizeof(size_thresh[0]); i++)
+    for (int i = 0; i < size_thresh_n; i++)
     {
-        if (size >= size_thresh[i] || i >= sizeof(size_thresh)/sizeof(size_thresh[0])-1)
+        if (size >= thr[i] || i >= size_thresh_n-1)
         {
-            double value = size_thresh[i] ? (double)size/size_thresh[i] : size;
+            double value = thr[i] ? (double)size/thr[i] : size;
             int l = snprintf(buf, sizeof(buf), "%.1f", value);
             assert(l < sizeof(buf)-2);
             if (buf[l-1] == '0')
                 l -= 2;
-            buf[l] = ' ';
-            buf[l+1] = size_unit[i];
+            buf[l] = i == size_thresh_n-1 && nobytes ? 0 : ' ';
+            buf[l+1] = i == size_thresh_n-1 && nobytes ? 0 : size_unit[i];
             buf[l+2] = 0;
             break;
         }

src/cli_merge.cpp

@@ -412,7 +412,7 @@ struct snap_merger_t
         uint64_t bitmap_size = target_block_size / gran;
         while (rwo->end < bitmap_size)
         {
-            auto bit = ((*(uint8_t*)(rwo->op.bitmap_buf + (rwo->end >> 3))) & (1 << (rwo->end & 0x7)));
+            auto bit = ((*((uint8_t*)rwo->op.bitmap_buf + (rwo->end >> 3))) & (1 << (rwo->end & 0x7)));
             if (!bit)
             {
                 if (rwo->end > rwo->start)
@@ -459,7 +459,7 @@ struct snap_merger_t
         subop->len = end-start;
         subop->version = version;
         subop->flags = OSD_OP_IGNORE_READONLY;
-        subop->iov.push_back(rwo->buf+start, end-start);
+        subop->iov.push_back((uint8_t*)rwo->buf+start, end-start);
         subop->callback = [this, rwo](cluster_op_t *subop)
         {
             rwo->todo--;
@@ -495,7 +495,7 @@ struct snap_merger_t
         subop->offset = offset;
         subop->len = 0;
         subop->flags = OSD_OP_IGNORE_READONLY;
-        subop->callback = [this](cluster_op_t *subop)
+        subop->callback = [](cluster_op_t *subop)
         {
             if (subop->retval != 0)
             {
@@ -519,10 +519,10 @@ struct snap_merger_t
                 deleted_unsynced++;
                 if (deleted_unsynced >= fsync_interval)
                 {
-                    uint64_t from = last_fsync_offset, to = last_written_offset;
+                    uint64_t to = last_written_offset;
                     cluster_op_t *subop = new cluster_op_t;
                     subop->opcode = OSD_OP_SYNC;
-                    subop->callback = [this, from, to](cluster_op_t *subop)
+                    subop->callback = [this, to](cluster_op_t *subop)
                     {
                         delete subop;
                         // We can now delete source data between <from> and <to>

src/cli_modify.cpp

@@ -170,29 +170,19 @@ resume_1:
                 } }
             });
         }
-        parent->waiting++;
-        parent->cli->st_cli.etcd_txn(json11::Json::object {
+        parent->etcd_txn(json11::Json::object {
             { "compare", checks },
             { "success", success },
-        }, ETCD_SLOW_TIMEOUT, [this](std::string err, json11::Json res)
-        {
-            if (err != "")
-            {
-                fprintf(stderr, "Error changing %s: %s\n", image_name.c_str(), err.c_str());
-                exit(1);
-            }
-            if (!res["succeeded"].bool_value())
-            {
-                fprintf(stderr, "Image %s was modified by someone else, please repeat your request\n", image_name.c_str());
-                exit(1);
-            }
-            parent->waiting--;
-            parent->ringloop->wakeup();
         });
         state = 2;
 resume_2:
         if (parent->waiting > 0)
             return;
+        if (!parent->etcd_result["succeeded"].bool_value())
+        {
+            fprintf(stderr, "Image %s was modified by someone else, please repeat your request\n", image_name.c_str());
+            exit(1);
+        }
         printf("Image %s modified\n", image_name.c_str());
         state = 100;
     }

src/cli_rm.cpp

@@ -1,211 +1,566 @@
 // Copyright (c) Vitaliy Filippov, 2019+
 // License: VNPL-1.1 (see README.md for details)
 
+#include <fcntl.h>
 #include "cli.h"
 #include "cluster_client.h"
+#include "base64.h"
 
-#define RM_LISTING 1
-#define RM_REMOVING 2
-#define RM_END 3
-
-struct rm_pg_t
+// Remove layer(s): similar to merge, but alters metadata and processes multiple merge targets
+//
+// Exactly one child of the requested layers may be merged using the "inverted" workflow,
+// where we merge it "down" into one of the "to-be-removed" layers and then rename the
+// "to-be-removed" layer to the child. It may be done either if all writers are stopped
+// before trying to delete layers (which is signaled by --writers-stopped) or if that child
+// is a read-only layer (snapshot) itself.
+//
+// This "inverted" workflow trades copying data of one of the deleted layers for copying
+// data of one child of the chain which is also a child of the "traded" layer. So we
+// choose the (parent,child) pair which has the largest difference between "parent" and
+// "child" inode sizes.
+//
+// All other children of the chain are processed by iterating though them, merging removed
+// parents into them and rebasing them to the last layer which isn't a member of the removed
+// chain.
+//
+// Example:
+//
+// <parent> - <from> - <layer 2> - <to> - <child 1>
+//                 \           \       \- <child 2>
+//                  \           \- <child 3>
+//                   \-<child 4>
+//
+// 1) Find optimal pair for the "reverse" scenario
+//    Imagine that it's (<layer 2>, <child 1>) in this example
+// 2) Process all children except <child 1>:
+//    - Merge <from>..<to> to <child 2>
+//    - Set <child 2> parent to <parent>
+//    - Repeat for others
+// 3) Process <child 1>:
+//    - Merge <from>..<child 1> to <layer 2>
+//    - Set <layer 2> parent to <parent>
+//    - Rename <layer 2> to <child 1>
+// 4) Delete other layers of the chain (<from>, <to>)
+struct snap_remover_t
 {
-    pg_num_t pg_num;
-    osd_num_t rm_osd_num;
-    std::set<object_id> objects;
-    std::set<object_id>::iterator obj_pos;
-    uint64_t obj_count = 0, obj_done = 0;
+    cli_tool_t *parent;
+
+    // remove from..to
+    std::string from_name, to_name;
+    // writers are stopped, we can safely change writable layers
+    bool writers_stopped = false;
+    // use CAS writes (0 = never, 1 = auto, 2 = always)
+    int use_cas = 1;
+    // interval between fsyncs
+    int fsync_interval = 128;
+
+    std::map<inode_t,int> sources;
+    std::map<inode_t,uint64_t> inode_used;
+    std::vector<inode_t> merge_children;
+    std::vector<inode_t> chain_list;
+    std::map<inode_t,int> inverse_candidates;
+    inode_t inverse_parent = 0, inverse_child = 0;
+    inode_t new_parent = 0;
     int state = 0;
-    int in_flight = 0;
-};
+    int current_child = 0;
+    std::function<bool(void)> cb;
 
-struct rm_inode_t
-{
-    uint64_t inode = 0;
-    pool_id_t pool_id = 0;
-    uint64_t min_offset = 0;
-
-    cli_tool_t *parent = NULL;
-    inode_list_t *lister = NULL;
-    std::vector<rm_pg_t*> lists;
-    uint64_t total_count = 0, total_done = 0, total_prev_pct = 0;
-    uint64_t pgs_to_list = 0;
-    bool lists_done = false;
-    int state = 0;
-
-    void start_delete()
+    bool is_done()
     {
-        lister = parent->cli->list_inode_start(inode, [this](inode_list_t *lst,
-            std::set<object_id>&& objects, pg_num_t pg_num, osd_num_t primary_osd, int status)
+        return state == 9;
+    }
+
+    void loop()
+    {
+        if (state == 1)
+            goto resume_1;
+        else if (state == 2)
+            goto resume_2;
+        else if (state == 3)
+            goto resume_3;
+        else if (state == 4)
+            goto resume_4;
+        else if (state == 5)
+            goto resume_5;
+        else if (state == 6)
+            goto resume_6;
+        else if (state == 7)
+            goto resume_7;
+        else if (state == 8)
+            goto resume_8;
+        else if (state == 9)
+            goto resume_9;
+        // Get children to merge
+        get_merge_children();
+        // Try to select an inode for the "inverse" optimized scenario
+        // Read statistics from etcd to do it
+        read_stats();
+        state = 1;
+resume_1:
+        if (parent->waiting > 0)
+            return;
+        choose_inverse_candidate();
+        // Merge children one by one, except our "inverse" child
+        for (current_child = 0; current_child < merge_children.size(); current_child++)
         {
-            rm_pg_t *rm = new rm_pg_t((rm_pg_t){
-                .pg_num = pg_num,
-                .rm_osd_num = primary_osd,
-                .objects = objects,
-                .obj_count = objects.size(),
-                .obj_done = 0,
-            });
-            if (min_offset == 0)
+            if (merge_children[current_child] == inverse_child)
+                continue;
+            start_merge_child(merge_children[current_child], merge_children[current_child]);
+resume_2:
+            while (!cb())
             {
-                total_count += objects.size();
+                state = 2;
+                return;
             }
-            else
-            {
-                for (object_id oid: objects)
-                {
-                    if (oid.stripe >= min_offset)
-                    {
-                        total_count++;
-                    }
-                }
-            }
-            rm->obj_pos = rm->objects.begin();
-            lists.push_back(rm);
-            if (parent->list_first)
-            {
-                parent->cli->list_inode_next(lister, 1);
-            }
-            if (status & INODE_LIST_DONE)
-            {
-                lists_done = true;
-            }
-            pgs_to_list--;
-            continue_delete();
-        });
-        if (!lister)
+            cb = NULL;
+            parent->change_parent(merge_children[current_child], new_parent);
+            state = 3;
+resume_3:
+            if (parent->waiting > 0)
+                return;
+        }
+        // Merge our "inverse" child into our "inverse" parent
+        if (inverse_child != 0)
         {
-            fprintf(stderr, "Failed to list inode %lu from pool %u objects\n", INODE_NO_POOL(inode), INODE_POOL(inode));
+            start_merge_child(inverse_child, inverse_parent);
+resume_4:
+            while (!cb())
+            {
+                state = 4;
+                return;
+            }
+            cb = NULL;
+            // Delete "inverse" child data
+            start_delete_source(inverse_child);
+resume_5:
+            while (!cb())
+            {
+                state = 5;
+                return;
+            }
+            cb = NULL;
+            // Delete "inverse" child metadata, rename parent over it,
+            // and also change parent links of the previous "inverse" child
+            rename_inverse_parent();
+            state = 6;
+resume_6:
+            if (parent->waiting > 0)
+                return;
+        }
+        // Delete parents, except the "inverse" one
+        for (current_child = 0; current_child < chain_list.size(); current_child++)
+        {
+            if (chain_list[current_child] == inverse_parent)
+                continue;
+            start_delete_source(chain_list[current_child]);
+resume_7:
+            while (!cb())
+            {
+                state = 7;
+                return;
+            }
+            cb = NULL;
+            delete_inode_config(chain_list[current_child]);
+            state = 8;
+resume_8:
+            if (parent->waiting > 0)
+                return;
+        }
+        state = 9;
+resume_9:
+        // Done
+        return;
+    }
+
+    void get_merge_children()
+    {
+        // Get all children of from..to
+        inode_config_t *from_cfg = parent->get_inode_cfg(from_name);
+        inode_config_t *to_cfg = parent->get_inode_cfg(to_name);
+        // Check that to_cfg is actually a child of from_cfg
+        // FIXME de-copypaste the following piece of code with snap_merger_t
+        inode_config_t *cur = to_cfg;
+        chain_list.push_back(cur->num);
+        while (cur->num != from_cfg->num && cur->parent_id != 0)
+        {
+            auto it = parent->cli->st_cli.inode_config.find(cur->parent_id);
+            if (it == parent->cli->st_cli.inode_config.end())
+            {
+                fprintf(stderr, "Parent inode of layer %s (id %ld) not found\n", cur->name.c_str(), cur->parent_id);
+                exit(1);
+            }
+            cur = &it->second;
+            chain_list.push_back(cur->num);
+        }
+        if (cur->num != from_cfg->num)
+        {
+            fprintf(stderr, "Layer %s is not a child of %s\n", to_name.c_str(), from_name.c_str());
             exit(1);
         }
-        pgs_to_list = parent->cli->list_pg_count(lister);
-        parent->cli->list_inode_next(lister, parent->parallel_osds);
-    }
-
-    void send_ops(rm_pg_t *cur_list)
-    {
-        if (parent->cli->msgr.osd_peer_fds.find(cur_list->rm_osd_num) ==
-            parent->cli->msgr.osd_peer_fds.end())
+        new_parent = from_cfg->parent_id;
+        // Calculate ranks
+        int i = chain_list.size()-1;
+        for (inode_t item: chain_list)
         {
-            // Initiate connection
-            parent->cli->msgr.connect_peer(cur_list->rm_osd_num, parent->cli->st_cli.peer_states[cur_list->rm_osd_num]);
-            return;
+            sources[item] = i--;
         }
-        while (cur_list->in_flight < parent->iodepth && cur_list->obj_pos != cur_list->objects.end())
+        for (auto & ic: parent->cli->st_cli.inode_config)
         {
-            if (cur_list->obj_pos->stripe >= min_offset)
+            if (!ic.second.parent_id)
             {
-                osd_op_t *op = new osd_op_t();
-                op->op_type = OSD_OP_OUT;
-                op->peer_fd = parent->cli->msgr.osd_peer_fds[cur_list->rm_osd_num];
-                op->req = (osd_any_op_t){
-                    .rw = {
-                        .header = {
-                            .magic = SECONDARY_OSD_OP_MAGIC,
-                            .id = parent->cli->next_op_id(),
-                            .opcode = OSD_OP_DELETE,
-                        },
-                        .inode = cur_list->obj_pos->inode,
-                        .offset = cur_list->obj_pos->stripe,
-                        .len = 0,
-                    },
-                };
-                op->callback = [this, cur_list](osd_op_t *op)
-                {
-                    cur_list->in_flight--;
-                    if (op->reply.hdr.retval < 0)
-                    {
-                        fprintf(stderr, "Failed to remove object %lx:%lx from PG %u (OSD %lu) (retval=%ld)\n",
-                            op->req.rw.inode, op->req.rw.offset,
-                            cur_list->pg_num, cur_list->rm_osd_num, op->reply.hdr.retval);
-                    }
-                    delete op;
-                    cur_list->obj_done++;
-                    total_done++;
-                    continue_delete();
-                };
-                cur_list->in_flight++;
-                parent->cli->msgr.outbox_push(op);
+                continue;
             }
-            cur_list->obj_pos++;
-        }
-    }
-
-    void continue_delete()
-    {
-        if (parent->list_first && !lists_done)
-        {
-            return;
-        }
-        for (int i = 0; i < lists.size(); i++)
-        {
-            if (!lists[i]->in_flight && lists[i]->obj_pos == lists[i]->objects.end())
+            auto it = sources.find(ic.second.parent_id);
+            if (it != sources.end() && sources.find(ic.second.num) == sources.end())
             {
-                delete lists[i];
-                lists.erase(lists.begin()+i, lists.begin()+i+1);
-                i--;
-                if (!lists_done)
+                merge_children.push_back(ic.second.num);
+                if (ic.second.readonly || writers_stopped)
                 {
-                    parent->cli->list_inode_next(lister, 1);
+                    inverse_candidates[ic.second.num] = it->second;
                 }
             }
-            else
-            {
-                send_ops(lists[i]);
-            }
-        }
-        if (parent->progress && total_count > 0 && total_done*1000/total_count != total_prev_pct)
-        {
-            printf("\rRemoved %lu/%lu objects, %lu more PGs to list...", total_done, total_count, pgs_to_list);
-            total_prev_pct = total_done*1000/total_count;
-        }
-        if (lists_done && !lists.size())
-        {
-            printf("Done, inode %lu in pool %u data removed\n", INODE_NO_POOL(inode), pool_id);
-            state = 2;
         }
     }
 
-    bool loop()
+    void read_stats()
     {
-        if (state == 0)
+        if (inverse_candidates.size() == 0)
         {
-            start_delete();
-            state = 1;
+            return;
         }
-        else if (state == 1)
+        json11::Json::array reads;
+        for (auto cp: inverse_candidates)
         {
-            continue_delete();
+            inode_t inode = cp.first;
+            reads.push_back(json11::Json::object {
+                { "request_range", json11::Json::object {
+                    { "key", base64_encode(
+                        parent->cli->st_cli.etcd_prefix+
+                        "/inode/stats/"+std::to_string(INODE_POOL(inode))+
+                        "/"+std::to_string(INODE_NO_POOL(inode))
+                    ) },
+                } }
+            });
         }
-        else if (state == 2)
+        for (auto cp: sources)
         {
-            return true;
+            inode_t inode = cp.first;
+            reads.push_back(json11::Json::object {
+                { "request_range", json11::Json::object {
+                    { "key", base64_encode(
+                        parent->cli->st_cli.etcd_prefix+
+                        "/inode/stats/"+std::to_string(INODE_POOL(inode))+
+                        "/"+std::to_string(INODE_NO_POOL(inode))
+                    ) },
+                } }
+            });
         }
-        return false;
+        parent->waiting++;
+        parent->cli->st_cli.etcd_txn_slow(json11::Json::object {
+            { "success", reads },
+        }, [this](std::string err, json11::Json data)
+        {
+            parent->waiting--;
+            if (err != "")
+            {
+                fprintf(stderr, "Error reading layer statistics from etcd: %s\n", err.c_str());
+                exit(1);
+            }
+            for (auto inode_result: data["responses"].array_items())
+            {
+                auto kv = parent->cli->st_cli.parse_etcd_kv(inode_result["kvs"][0]);
+                pool_id_t pool_id = 0;
+                inode_t inode = 0;
+                char null_byte = 0;
+                sscanf(kv.key.c_str() + parent->cli->st_cli.etcd_prefix.length()+13, "%u/%lu%c", &pool_id, &inode, &null_byte);
+                if (!inode || null_byte != 0)
+                {
+                    fprintf(stderr, "Bad key returned from etcd: %s\n", kv.key.c_str());
+                    exit(1);
+                }
+                auto pool_cfg_it = parent->cli->st_cli.pool_config.find(pool_id);
+                if (pool_cfg_it == parent->cli->st_cli.pool_config.end())
+                {
+                    fprintf(stderr, "Pool %u does not exist\n", pool_id);
+                    exit(1);
+                }
+                inode = INODE_WITH_POOL(pool_id, inode);
+                auto & pool_cfg = pool_cfg_it->second;
+                uint64_t used_bytes = kv.value["raw_used"].uint64_value() / pool_cfg.pg_size;
+                if (pool_cfg.scheme != POOL_SCHEME_REPLICATED)
+                {
+                    used_bytes *= (pool_cfg.pg_size - pool_cfg.parity_chunks);
+                }
+                inode_used[inode] = used_bytes;
+            }
+            parent->ringloop->wakeup();
+        });
+    }
+
+    void choose_inverse_candidate()
+    {
+        uint64_t max_diff = 0;
+        for (auto cp: inverse_candidates)
+        {
+            inode_t child = cp.first;
+            uint64_t child_used = inode_used[child];
+            int rank = cp.second;
+            for (int i = chain_list.size()-rank; i < chain_list.size(); i++)
+            {
+                inode_t parent = chain_list[i];
+                uint64_t parent_used = inode_used[parent];
+                if (parent_used > child_used && (!max_diff || max_diff < (parent_used-child_used)))
+                {
+                    max_diff = (parent_used-child_used);
+                    inverse_parent = parent;
+                    inverse_child = child;
+                }
+            }
+        }
+    }
+
+    void rename_inverse_parent()
+    {
+        auto child_it = parent->cli->st_cli.inode_config.find(inverse_child);
+        if (child_it == parent->cli->st_cli.inode_config.end())
+        {
+            fprintf(stderr, "Inode %ld disappeared\n", inverse_child);
+            exit(1);
+        }
+        auto target_it = parent->cli->st_cli.inode_config.find(inverse_parent);
+        if (target_it == parent->cli->st_cli.inode_config.end())
+        {
+            fprintf(stderr, "Inode %ld disappeared\n", inverse_parent);
+            exit(1);
+        }
+        inode_config_t *child_cfg = &child_it->second;
+        inode_config_t *target_cfg = &target_it->second;
+        std::string child_name = child_cfg->name;
+        std::string target_name = target_cfg->name;
+        std::string child_cfg_key = base64_encode(
+            parent->cli->st_cli.etcd_prefix+
+            "/config/inode/"+std::to_string(INODE_POOL(inverse_child))+
+            "/"+std::to_string(INODE_NO_POOL(inverse_child))
+        );
+        std::string target_cfg_key = base64_encode(
+            parent->cli->st_cli.etcd_prefix+
+            "/config/inode/"+std::to_string(INODE_POOL(inverse_parent))+
+            "/"+std::to_string(INODE_NO_POOL(inverse_parent))
+        );
+        // Fill new configuration
+        inode_config_t new_cfg = *child_cfg;
+        new_cfg.num = target_cfg->num;
+        new_cfg.parent_id = new_parent;
+        json11::Json::array cmp = json11::Json::array {
+            json11::Json::object {
+                { "target", "MOD" },
+                { "key", child_cfg_key },
+                { "result", "LESS" },
+                { "mod_revision", child_cfg->mod_revision+1 },
+            },
+            json11::Json::object {
+                { "target", "MOD" },
+                { "key", target_cfg_key },
+                { "result", "LESS" },
+                { "mod_revision", target_cfg->mod_revision+1 },
+            },
+        };
+        json11::Json::array txn = json11::Json::array {
+            json11::Json::object {
+                { "request_delete_range", json11::Json::object {
+                    { "key", child_cfg_key },
+                } },
+            },
+            json11::Json::object {
+                { "request_put", json11::Json::object {
+                    { "key", target_cfg_key },
+                    { "value", base64_encode(json11::Json(parent->cli->st_cli.serialize_inode_cfg(&new_cfg)).dump()) },
+                } },
+            },
+            json11::Json::object {
+                { "request_put", json11::Json::object {
+                    { "key", base64_encode(parent->cli->st_cli.etcd_prefix+"/index/image/"+child_cfg->name) },
+                    { "value", base64_encode(json11::Json({
+                        { "id", INODE_NO_POOL(inverse_parent) },
+                        { "pool_id", (uint64_t)INODE_POOL(inverse_parent) },
+                    }).dump()) },
+                } },
+            },
+        };
+        // Reparent children of inverse_child
+        for (auto & cp: parent->cli->st_cli.inode_config)
+        {
+            if (cp.second.parent_id == child_cfg->num)
+            {
+                auto cp_cfg = cp.second;
+                cp_cfg.parent_id = inverse_parent;
+                auto cp_key = base64_encode(
+                    parent->cli->st_cli.etcd_prefix+
+                    "/config/inode/"+std::to_string(INODE_POOL(cp.second.num))+
+                    "/"+std::to_string(INODE_NO_POOL(cp.second.num))
+                );
+                cmp.push_back(json11::Json::object {
+                    { "target", "MOD" },
+                    { "key", cp_key },
+                    { "result", "LESS" },
+                    { "mod_revision", cp.second.mod_revision+1 },
+                });
+                txn.push_back(json11::Json::object {
+                    { "request_put", json11::Json::object {
+                        { "key", cp_key },
+                        { "value", base64_encode(json11::Json(parent->cli->st_cli.serialize_inode_cfg(&cp_cfg)).dump()) },
+                    } },
+                });
+            }
+        }
+        parent->waiting++;
+        parent->cli->st_cli.etcd_txn_slow(json11::Json::object {
+            { "compare", cmp },
+            { "success", txn },
+        }, [this, target_name, child_name](std::string err, json11::Json res)
+        {
+            parent->waiting--;
+            if (err != "")
+            {
+                fprintf(stderr, "Error renaming %s to %s: %s\n", target_name.c_str(), child_name.c_str(), err.c_str());
+                exit(1);
+            }
+            if (!res["succeeded"].bool_value())
+            {
+                fprintf(
+                    stderr, "Parent (%s), child (%s), or one of its children"
+                    " configuration was modified during rename\n", target_name.c_str(), child_name.c_str()
+                );
+                exit(1);
+            }
+            printf("Layer %s renamed to %s\n", target_name.c_str(), child_name.c_str());
+            parent->ringloop->wakeup();
+        });
+    }
+
+    void delete_inode_config(inode_t cur)
+    {
+        auto cur_cfg_it = parent->cli->st_cli.inode_config.find(cur);
+        if (cur_cfg_it == parent->cli->st_cli.inode_config.end())
+        {
+            fprintf(stderr, "Inode 0x%lx disappeared\n", cur);
+            exit(1);
+        }
+        inode_config_t *cur_cfg = &cur_cfg_it->second;
+        std::string cur_name = cur_cfg->name;
+        std::string cur_cfg_key = base64_encode(
+            parent->cli->st_cli.etcd_prefix+
+            "/config/inode/"+std::to_string(INODE_POOL(cur))+
+            "/"+std::to_string(INODE_NO_POOL(cur))
+        );
+        parent->waiting++;
+        parent->cli->st_cli.etcd_txn_slow(json11::Json::object {
+            { "compare", json11::Json::array {
+                json11::Json::object {
+                    { "target", "MOD" },
+                    { "key", cur_cfg_key },
+                    { "result", "LESS" },
+                    { "mod_revision", cur_cfg->mod_revision+1 },
+                },
+            } },
+            { "success", json11::Json::array {
+                json11::Json::object {
+                    { "request_delete_range", json11::Json::object {
+                        { "key", cur_cfg_key },
+                    } },
+                },
+                json11::Json::object {
+                    { "request_delete_range", json11::Json::object {
+                        { "key", base64_encode(parent->cli->st_cli.etcd_prefix+"/index/image/"+cur_name) },
+                    } },
+                },
+            } },
+        }, [this, cur_name](std::string err, json11::Json res)
+        {
+            parent->waiting--;
+            if (err != "")
+            {
+                fprintf(stderr, "Error deleting %s: %s\n", cur_name.c_str(), err.c_str());
+                exit(1);
+            }
+            if (!res["succeeded"].bool_value())
+            {
+                fprintf(stderr, "Layer %s configuration was modified during deletion\n", cur_name.c_str());
+                exit(1);
+            }
+            printf("Layer %s deleted\n", cur_name.c_str());
+            parent->ringloop->wakeup();
+        });
+    }
+
+    void start_merge_child(inode_t child_inode, inode_t target_inode)
+    {
+        auto child_it = parent->cli->st_cli.inode_config.find(child_inode);
+        if (child_it == parent->cli->st_cli.inode_config.end())
+        {
+            fprintf(stderr, "Inode %ld disappeared\n", child_inode);
+            exit(1);
+        }
+        auto target_it = parent->cli->st_cli.inode_config.find(target_inode);
+        if (target_it == parent->cli->st_cli.inode_config.end())
+        {
+            fprintf(stderr, "Inode %ld disappeared\n", target_inode);
+            exit(1);
+        }
+        cb = parent->start_merge(json11::Json::object {
+            { "command", json11::Json::array{ "merge-data", from_name, child_it->second.name } },
+            { "target", target_it->second.name },
+            { "delete-source", false },
+            { "cas", use_cas },
+            { "fsync-interval", fsync_interval },
+        });
+    }
+
+    void start_delete_source(inode_t inode)
+    {
+        auto source = parent->cli->st_cli.inode_config.find(inode);
+        if (source == parent->cli->st_cli.inode_config.end())
+        {
+            fprintf(stderr, "Inode %ld disappeared\n", inode);
+            exit(1);
+        }
+        cb = parent->start_rm(json11::Json::object {
+            { "inode", inode },
+            { "pool", (uint64_t)INODE_POOL(inode) },
+            { "fsync-interval", fsync_interval },
+        });
     }
 };
 
-std::function<bool(void)> cli_tool_t::start_rm(json11::Json cfg)
+std::function<bool(void)> cli_tool_t::start_snap_rm(json11::Json cfg)
 {
-    auto remover = new rm_inode_t();
-    remover->parent = this;
-    remover->inode = cfg["inode"].uint64_value();
-    remover->pool_id = cfg["pool"].uint64_value();
-    if (remover->pool_id)
+    json11::Json::array cmd = cfg["command"].array_items();
+    auto snap_remover = new snap_remover_t();
+    snap_remover->parent = this;
+    snap_remover->from_name = cmd.size() > 1 ? cmd[1].string_value() : "";
+    snap_remover->to_name = cmd.size() > 2 ? cmd[2].string_value() : "";
+    if (snap_remover->from_name == "")
     {
-        remover->inode = (remover->inode & ((1l << (64-POOL_ID_BITS)) - 1)) | (((uint64_t)remover->pool_id) << (64-POOL_ID_BITS));
-    }
-    remover->pool_id = INODE_POOL(remover->inode);
-    if (!remover->pool_id)
-    {
-        fprintf(stderr, "pool is missing\n");
+        fprintf(stderr, "Layer to remove argument is missing\n");
         exit(1);
     }
-    remover->min_offset = cfg["min-offset"].uint64_value();
-    return [remover]()
+    if (snap_remover->to_name == "")
     {
-        if (remover->loop())
+        snap_remover->to_name = snap_remover->from_name;
+    }
+    snap_remover->fsync_interval = cfg["fsync-interval"].uint64_value();
+    if (!snap_remover->fsync_interval)
+        snap_remover->fsync_interval = 128;
+    if (!cfg["cas"].is_null())
+        snap_remover->use_cas = cfg["cas"].uint64_value() ? 2 : 0;
+    if (!cfg["writers_stopped"].is_null())
+        snap_remover->writers_stopped = true;
+    return [snap_remover]()
+    {
+        snap_remover->loop();
+        if (snap_remover->is_done())
         {
-            delete remover;
+            delete snap_remover;
             return true;
         }
         return false;

src/cli_rm_data.cpp

@@ -0,0 +1,214 @@
+// Copyright (c) Vitaliy Filippov, 2019+
+// License: VNPL-1.1 (see README.md for details)
+
+#include "cli.h"
+#include "cluster_client.h"
+
+#define RM_LISTING 1
+#define RM_REMOVING 2
+#define RM_END 3
+
+struct rm_pg_t
+{
+    pg_num_t pg_num;
+    osd_num_t rm_osd_num;
+    std::set<object_id> objects;
+    std::set<object_id>::iterator obj_pos;
+    uint64_t obj_count = 0, obj_done = 0;
+    int state = 0;
+    int in_flight = 0;
+};
+
+struct rm_inode_t
+{
+    uint64_t inode = 0;
+    pool_id_t pool_id = 0;
+    uint64_t min_offset = 0;
+
+    cli_tool_t *parent = NULL;
+    inode_list_t *lister = NULL;
+    std::vector<rm_pg_t*> lists;
+    uint64_t total_count = 0, total_done = 0, total_prev_pct = 0;
+    uint64_t pgs_to_list = 0;
+    bool lists_done = false;
+    int state = 0;
+
+    void start_delete()
+    {
+        lister = parent->cli->list_inode_start(inode, [this](inode_list_t *lst,
+            std::set<object_id>&& objects, pg_num_t pg_num, osd_num_t primary_osd, int status)
+        {
+            rm_pg_t *rm = new rm_pg_t((rm_pg_t){
+                .pg_num = pg_num,
+                .rm_osd_num = primary_osd,
+                .objects = objects,
+                .obj_count = objects.size(),
+                .obj_done = 0,
+            });
+            if (min_offset == 0)
+            {
+                total_count += objects.size();
+            }
+            else
+            {
+                for (object_id oid: objects)
+                {
+                    if (oid.stripe >= min_offset)
+                    {
+                        total_count++;
+                    }
+                }
+            }
+            rm->obj_pos = rm->objects.begin();
+            lists.push_back(rm);
+            if (parent->list_first)
+            {
+                parent->cli->list_inode_next(lister, 1);
+            }
+            if (status & INODE_LIST_DONE)
+            {
+                lists_done = true;
+            }
+            pgs_to_list--;
+            continue_delete();
+        });
+        if (!lister)
+        {
+            fprintf(stderr, "Failed to list inode %lu from pool %u objects\n", INODE_NO_POOL(inode), INODE_POOL(inode));
+            exit(1);
+        }
+        pgs_to_list = parent->cli->list_pg_count(lister);
+        parent->cli->list_inode_next(lister, parent->parallel_osds);
+    }
+
+    void send_ops(rm_pg_t *cur_list)
+    {
+        if (parent->cli->msgr.osd_peer_fds.find(cur_list->rm_osd_num) ==
+            parent->cli->msgr.osd_peer_fds.end())
+        {
+            // Initiate connection
+            parent->cli->msgr.connect_peer(cur_list->rm_osd_num, parent->cli->st_cli.peer_states[cur_list->rm_osd_num]);
+            return;
+        }
+        while (cur_list->in_flight < parent->iodepth && cur_list->obj_pos != cur_list->objects.end())
+        {
+            if (cur_list->obj_pos->stripe >= min_offset)
+            {
+                osd_op_t *op = new osd_op_t();
+                op->op_type = OSD_OP_OUT;
+                // Already checked that it exists above, but anyway
+                op->peer_fd = parent->cli->msgr.osd_peer_fds.at(cur_list->rm_osd_num);
+                op->req = (osd_any_op_t){
+                    .rw = {
+                        .header = {
+                            .magic = SECONDARY_OSD_OP_MAGIC,
+                            .id = parent->cli->next_op_id(),
+                            .opcode = OSD_OP_DELETE,
+                        },
+                        .inode = cur_list->obj_pos->inode,
+                        .offset = cur_list->obj_pos->stripe,
+                        .len = 0,
+                    },
+                };
+                op->callback = [this, cur_list](osd_op_t *op)
+                {
+                    cur_list->in_flight--;
+                    if (op->reply.hdr.retval < 0)
+                    {
+                        fprintf(stderr, "Failed to remove object %lx:%lx from PG %u (OSD %lu) (retval=%ld)\n",
+                            op->req.rw.inode, op->req.rw.offset,
+                            cur_list->pg_num, cur_list->rm_osd_num, op->reply.hdr.retval);
+                    }
+                    delete op;
+                    cur_list->obj_done++;
+                    total_done++;
+                    continue_delete();
+                };
+                cur_list->in_flight++;
+                parent->cli->msgr.outbox_push(op);
+            }
+            cur_list->obj_pos++;
+        }
+    }
+
+    void continue_delete()
+    {
+        if (parent->list_first && !lists_done)
+        {
+            return;
+        }
+        for (int i = 0; i < lists.size(); i++)
+        {
+            if (!lists[i]->in_flight && lists[i]->obj_pos == lists[i]->objects.end())
+            {
+                delete lists[i];
+                lists.erase(lists.begin()+i, lists.begin()+i+1);
+                i--;
+                if (!lists_done)
+                {
+                    parent->cli->list_inode_next(lister, 1);
+                }
+            }
+            else
+            {
+                send_ops(lists[i]);
+            }
+        }
+        if (parent->progress && total_count > 0 && total_done*1000/total_count != total_prev_pct)
+        {
+            printf("\rRemoved %lu/%lu objects, %lu more PGs to list...", total_done, total_count, pgs_to_list);
+            total_prev_pct = total_done*1000/total_count;
+        }
+        if (lists_done && !lists.size())
+        {
+            printf("Done, inode %lu in pool %u data removed\n", INODE_NO_POOL(inode), pool_id);
+            state = 2;
+        }
+    }
+
+    bool loop()
+    {
+        if (state == 0)
+        {
+            start_delete();
+            state = 1;
+        }
+        else if (state == 1)
+        {
+            continue_delete();
+        }
+        else if (state == 2)
+        {
+            return true;
+        }
+        return false;
+    }
+};
+
+std::function<bool(void)> cli_tool_t::start_rm(json11::Json cfg)
+{
+    auto remover = new rm_inode_t();
+    remover->parent = this;
+    remover->inode = cfg["inode"].uint64_value();
+    remover->pool_id = cfg["pool"].uint64_value();
+    if (remover->pool_id)
+    {
+        remover->inode = (remover->inode & (((uint64_t)1 << (64-POOL_ID_BITS)) - 1)) | (((uint64_t)remover->pool_id) << (64-POOL_ID_BITS));
+    }
+    remover->pool_id = INODE_POOL(remover->inode);
+    if (!remover->pool_id)
+    {
+        fprintf(stderr, "pool is missing\n");
+        exit(1);
+    }
+    remover->min_offset = cfg["min-offset"].uint64_value();
+    return [remover]()
+    {
+        if (remover->loop())
+        {
+            delete remover;
+            return true;
+        }
+        return false;
+    };
+}

src/cli_simple_offsets.cpp

@@ -8,6 +8,7 @@
 #include "cli.h"
 #include "cluster_client.h"
 #include "base64.h"
+#include <sys/stat.h>
 
 // Calculate offsets for a block device and print OSD command line parameters
 std::function<bool(void)> cli_tool_t::simple_offsets(json11::Json cfg)

src/cli_snap_rm.cpp

@@ -1,568 +0,0 @@
-// Copyright (c) Vitaliy Filippov, 2019+
-// License: VNPL-1.1 (see README.md for details)
-
-#include <fcntl.h>
-#include "cli.h"
-#include "cluster_client.h"
-#include "base64.h"
-
-// Remove layer(s): similar to merge, but alters metadata and processes multiple merge targets
-//
-// Exactly one child of the requested layers may be merged using the "inverted" workflow,
-// where we merge it "down" into one of the "to-be-removed" layers and then rename the
-// "to-be-removed" layer to the child. It may be done either if all writers are stopped
-// before trying to delete layers (which is signaled by --writers-stopped) or if that child
-// is a read-only layer (snapshot) itself.
-//
-// This "inverted" workflow trades copying data of one of the deleted layers for copying
-// data of one child of the chain which is also a child of the "traded" layer. So we
-// choose the (parent,child) pair which has the largest difference between "parent" and
-// "child" inode sizes.
-//
-// All other children of the chain are processed by iterating though them, merging removed
-// parents into them and rebasing them to the last layer which isn't a member of the removed
-// chain.
-//
-// Example:
-//
-// <parent> - <from> - <layer 2> - <to> - <child 1>
-//                 \           \       \- <child 2>
-//                  \           \- <child 3>
-//                   \-<child 4>
-//
-// 1) Find optimal pair for the "reverse" scenario
-//    Imagine that it's (<layer 2>, <child 1>) in this example
-// 2) Process all children except <child 1>:
-//    - Merge <from>..<to> to <child 2>
-//    - Set <child 2> parent to <parent>
-//    - Repeat for others
-// 3) Process <child 1>:
-//    - Merge <from>..<child 1> to <layer 2>
-//    - Set <layer 2> parent to <parent>
-//    - Rename <layer 2> to <child 1>
-// 4) Delete other layers of the chain (<from>, <to>)
-struct snap_remover_t
-{
-    cli_tool_t *parent;
-
-    // remove from..to
-    std::string from_name, to_name;
-    // writers are stopped, we can safely change writable layers
-    bool writers_stopped = false;
-    // use CAS writes (0 = never, 1 = auto, 2 = always)
-    int use_cas = 1;
-    // interval between fsyncs
-    int fsync_interval = 128;
-
-    std::map<inode_t,int> sources;
-    std::map<inode_t,uint64_t> inode_used;
-    std::vector<inode_t> merge_children;
-    std::vector<inode_t> chain_list;
-    std::map<inode_t,int> inverse_candidates;
-    inode_t inverse_parent = 0, inverse_child = 0;
-    inode_t new_parent = 0;
-    int state = 0;
-    int current_child = 0;
-    std::function<bool(void)> cb;
-
-    bool is_done()
-    {
-        return state == 9;
-    }
-
-    void loop()
-    {
-        if (state == 1)
-            goto resume_1;
-        else if (state == 2)
-            goto resume_2;
-        else if (state == 3)
-            goto resume_3;
-        else if (state == 4)
-            goto resume_4;
-        else if (state == 5)
-            goto resume_5;
-        else if (state == 6)
-            goto resume_6;
-        else if (state == 7)
-            goto resume_7;
-        else if (state == 8)
-            goto resume_8;
-        else if (state == 9)
-            goto resume_9;
-        // Get children to merge
-        get_merge_children();
-        // Try to select an inode for the "inverse" optimized scenario
-        // Read statistics from etcd to do it
-        read_stats();
-        state = 1;
-resume_1:
-        if (parent->waiting > 0)
-            return;
-        choose_inverse_candidate();
-        // Merge children one by one, except our "inverse" child
-        for (current_child = 0; current_child < merge_children.size(); current_child++)
-        {
-            if (merge_children[current_child] == inverse_child)
-                continue;
-            start_merge_child(merge_children[current_child], merge_children[current_child]);
-resume_2:
-            while (!cb())
-            {
-                state = 2;
-                return;
-            }
-            cb = NULL;
-            parent->change_parent(merge_children[current_child], new_parent);
-            state = 3;
-resume_3:
-            if (parent->waiting > 0)
-                return;
-        }
-        // Merge our "inverse" child into our "inverse" parent
-        if (inverse_child != 0)
-        {
-            start_merge_child(inverse_child, inverse_parent);
-resume_4:
-            while (!cb())
-            {
-                state = 4;
-                return;
-            }
-            cb = NULL;
-            // Delete "inverse" child data
-            start_delete_source(inverse_child);
-resume_5:
-            while (!cb())
-            {
-                state = 5;
-                return;
-            }
-            cb = NULL;
-            // Delete "inverse" child metadata, rename parent over it,
-            // and also change parent links of the previous "inverse" child
-            rename_inverse_parent();
-            state = 6;
-resume_6:
-            if (parent->waiting > 0)
-                return;
-        }
-        // Delete parents, except the "inverse" one
-        for (current_child = 0; current_child < chain_list.size(); current_child++)
-        {
-            if (chain_list[current_child] == inverse_parent)
-                continue;
-            start_delete_source(chain_list[current_child]);
-resume_7:
-            while (!cb())
-            {
-                state = 7;
-                return;
-            }
-            cb = NULL;
-            delete_inode_config(chain_list[current_child]);
-            state = 8;
-resume_8:
-            if (parent->waiting > 0)
-                return;
-        }
-        state = 9;
-resume_9:
-        // Done
-        return;
-    }
-
-    void get_merge_children()
-    {
-        // Get all children of from..to
-        inode_config_t *from_cfg = parent->get_inode_cfg(from_name);
-        inode_config_t *to_cfg = parent->get_inode_cfg(to_name);
-        // Check that to_cfg is actually a child of from_cfg
-        // FIXME de-copypaste the following piece of code with snap_merger_t
-        inode_config_t *cur = to_cfg;
-        chain_list.push_back(cur->num);
-        while (cur->num != from_cfg->num && cur->parent_id != 0)
-        {
-            auto it = parent->cli->st_cli.inode_config.find(cur->parent_id);
-            if (it == parent->cli->st_cli.inode_config.end())
-            {
-                fprintf(stderr, "Parent inode of layer %s (id %ld) not found\n", cur->name.c_str(), cur->parent_id);
-                exit(1);
-            }
-            cur = &it->second;
-            chain_list.push_back(cur->num);
-        }
-        if (cur->num != from_cfg->num)
-        {
-            fprintf(stderr, "Layer %s is not a child of %s\n", to_name.c_str(), from_name.c_str());
-            exit(1);
-        }
-        new_parent = from_cfg->parent_id;
-        // Calculate ranks
-        int i = chain_list.size()-1;
-        for (inode_t item: chain_list)
-        {
-            sources[item] = i--;
-        }
-        for (auto & ic: parent->cli->st_cli.inode_config)
-        {
-            if (!ic.second.parent_id)
-            {
-                continue;
-            }
-            auto it = sources.find(ic.second.parent_id);
-            if (it != sources.end() && sources.find(ic.second.num) == sources.end())
-            {
-                merge_children.push_back(ic.second.num);
-                if (ic.second.readonly || writers_stopped)
-                {
-                    inverse_candidates[ic.second.num] = it->second;
-                }
-            }
-        }
-    }
-
-    void read_stats()
-    {
-        if (inverse_candidates.size() == 0)
-        {
-            return;
-        }
-        json11::Json::array reads;
-        for (auto cp: inverse_candidates)
-        {
-            inode_t inode = cp.first;
-            reads.push_back(json11::Json::object {
-                { "request_range", json11::Json::object {
-                    { "key", base64_encode(
-                        parent->cli->st_cli.etcd_prefix+
-                        "/inode/stats/"+std::to_string(INODE_POOL(inode))+
-                        "/"+std::to_string(INODE_NO_POOL(inode))
-                    ) },
-                } }
-            });
-        }
-        for (auto cp: sources)
-        {
-            inode_t inode = cp.first;
-            reads.push_back(json11::Json::object {
-                { "request_range", json11::Json::object {
-                    { "key", base64_encode(
-                        parent->cli->st_cli.etcd_prefix+
-                        "/inode/stats/"+std::to_string(INODE_POOL(inode))+
-                        "/"+std::to_string(INODE_NO_POOL(inode))
-                    ) },
-                } }
-            });
-        }
-        parent->waiting++;
-        parent->cli->st_cli.etcd_txn(json11::Json::object {
-            { "success", reads },
-        }, ETCD_SLOW_TIMEOUT, [this](std::string err, json11::Json data)
-        {
-            parent->waiting--;
-            if (err != "")
-            {
-                fprintf(stderr, "Error reading layer statistics from etcd: %s\n", err.c_str());
-                exit(1);
-            }
-            for (auto inode_result: data["responses"].array_items())
-            {
-                auto kv = parent->cli->st_cli.parse_etcd_kv(inode_result["kvs"][0]);
-                pool_id_t pool_id = 0;
-                inode_t inode = 0;
-                char null_byte = 0;
-                sscanf(kv.key.c_str() + parent->cli->st_cli.etcd_prefix.length()+13, "%u/%lu%c", &pool_id, &inode, &null_byte);
-                if (!inode || null_byte != 0)
-                {
-                    fprintf(stderr, "Bad key returned from etcd: %s\n", kv.key.c_str());
-                    exit(1);
-                }
-                auto pool_cfg_it = parent->cli->st_cli.pool_config.find(pool_id);
-                if (pool_cfg_it == parent->cli->st_cli.pool_config.end())
-                {
-                    fprintf(stderr, "Pool %u does not exist\n", pool_id);
-                    exit(1);
-                }
-                inode = INODE_WITH_POOL(pool_id, inode);
-                auto & pool_cfg = pool_cfg_it->second;
-                uint64_t used_bytes = kv.value["raw_used"].uint64_value() / pool_cfg.pg_size;
-                if (pool_cfg.scheme != POOL_SCHEME_REPLICATED)
-                {
-                    used_bytes *= (pool_cfg.pg_size - pool_cfg.parity_chunks);
-                }
-                inode_used[inode] = used_bytes;
-            }
-            parent->ringloop->wakeup();
-        });
-    }
-
-    void choose_inverse_candidate()
-    {
-        uint64_t max_diff = 0;
-        for (auto cp: inverse_candidates)
-        {
-            inode_t child = cp.first;
-            uint64_t child_used = inode_used[child];
-            int rank = cp.second;
-            for (int i = chain_list.size()-rank; i < chain_list.size(); i++)
-            {
-                inode_t parent = chain_list[i];
-                uint64_t parent_used = inode_used[parent];
-                if (parent_used > child_used && (!max_diff || max_diff < (parent_used-child_used)))
-                {
-                    max_diff = (parent_used-child_used);
-                    inverse_parent = parent;
-                    inverse_child = child;
-                }
-            }
-        }
-    }
-
-    void rename_inverse_parent()
-    {
-        auto child_it = parent->cli->st_cli.inode_config.find(inverse_child);
-        if (child_it == parent->cli->st_cli.inode_config.end())
-        {
-            fprintf(stderr, "Inode %ld disappeared\n", inverse_child);
-            exit(1);
-        }
-        auto target_it = parent->cli->st_cli.inode_config.find(inverse_parent);
-        if (target_it == parent->cli->st_cli.inode_config.end())
-        {
-            fprintf(stderr, "Inode %ld disappeared\n", inverse_parent);
-            exit(1);
-        }
-        inode_config_t *child_cfg = &child_it->second;
-        inode_config_t *target_cfg = &target_it->second;
-        std::string child_name = child_cfg->name;
-        std::string target_name = target_cfg->name;
-        std::string child_cfg_key = base64_encode(
-            parent->cli->st_cli.etcd_prefix+
-            "/config/inode/"+std::to_string(INODE_POOL(inverse_child))+
-            "/"+std::to_string(INODE_NO_POOL(inverse_child))
-        );
-        std::string target_cfg_key = base64_encode(
-            parent->cli->st_cli.etcd_prefix+
-            "/config/inode/"+std::to_string(INODE_POOL(inverse_parent))+
-            "/"+std::to_string(INODE_NO_POOL(inverse_parent))
-        );
-        // Fill new configuration
-        inode_config_t new_cfg = *child_cfg;
-        new_cfg.num = target_cfg->num;
-        new_cfg.parent_id = new_parent;
-        json11::Json::array cmp = json11::Json::array {
-            json11::Json::object {
-                { "target", "MOD" },
-                { "key", child_cfg_key },
-                { "result", "LESS" },
-                { "mod_revision", child_cfg->mod_revision+1 },
-            },
-            json11::Json::object {
-                { "target", "MOD" },
-                { "key", target_cfg_key },
-                { "result", "LESS" },
-                { "mod_revision", target_cfg->mod_revision+1 },
-            },
-        };
-        json11::Json::array txn = json11::Json::array {
-            json11::Json::object {
-                { "request_delete_range", json11::Json::object {
-                    { "key", child_cfg_key },
-                } },
-            },
-            json11::Json::object {
-                { "request_put", json11::Json::object {
-                    { "key", target_cfg_key },
-                    { "value", base64_encode(json11::Json(parent->cli->st_cli.serialize_inode_cfg(&new_cfg)).dump()) },
-                } },
-            },
-            json11::Json::object {
-                { "request_put", json11::Json::object {
-                    { "key", base64_encode(parent->cli->st_cli.etcd_prefix+"/index/image/"+child_cfg->name) },
-                    { "value", base64_encode(json11::Json({
-                        { "id", INODE_NO_POOL(inverse_parent) },
-                        { "pool_id", (uint64_t)INODE_POOL(inverse_parent) },
-                    }).dump()) },
-                } },
-            },
-        };
-        // Reparent children of inverse_child
-        for (auto & cp: parent->cli->st_cli.inode_config)
-        {
-            if (cp.second.parent_id == child_cfg->num)
-            {
-                auto cp_cfg = cp.second;
-                cp_cfg.parent_id = inverse_parent;
-                auto cp_key = base64_encode(
-                    parent->cli->st_cli.etcd_prefix+
-                    "/config/inode/"+std::to_string(INODE_POOL(cp.second.num))+
-                    "/"+std::to_string(INODE_NO_POOL(cp.second.num))
-                );
-                cmp.push_back(json11::Json::object {
-                    { "target", "MOD" },
-                    { "key", cp_key },
-                    { "result", "LESS" },
-                    { "mod_revision", cp.second.mod_revision+1 },
-                });
-                txn.push_back(json11::Json::object {
-                    { "request_put", json11::Json::object {
-                        { "key", cp_key },
-                        { "value", base64_encode(json11::Json(parent->cli->st_cli.serialize_inode_cfg(&cp_cfg)).dump()) },
-                    } },
-                });
-            }
-        }
-        parent->waiting++;
-        parent->cli->st_cli.etcd_txn(json11::Json::object {
-            { "compare", cmp },
-            { "success", txn },
-        }, ETCD_SLOW_TIMEOUT, [this, target_name, child_name](std::string err, json11::Json res)
-        {
-            parent->waiting--;
-            if (err != "")
-            {
-                fprintf(stderr, "Error renaming %s to %s: %s\n", target_name.c_str(), child_name.c_str(), err.c_str());
-                exit(1);
-            }
-            if (!res["succeeded"].bool_value())
-            {
-                fprintf(
-                    stderr, "Parent (%s), child (%s), or one of its children"
-                    " configuration was modified during rename\n", target_name.c_str(), child_name.c_str()
-                );
-                exit(1);
-            }
-            printf("Layer %s renamed to %s\n", target_name.c_str(), child_name.c_str());
-            parent->ringloop->wakeup();
-        });
-    }
-
-    void delete_inode_config(inode_t cur)
-    {
-        auto cur_cfg_it = parent->cli->st_cli.inode_config.find(cur);
-        if (cur_cfg_it == parent->cli->st_cli.inode_config.end())
-        {
-            fprintf(stderr, "Inode 0x%lx disappeared\n", cur);
-            exit(1);
-        }
-        inode_config_t *cur_cfg = &cur_cfg_it->second;
-        std::string cur_name = cur_cfg->name;
-        std::string cur_cfg_key = base64_encode(
-            parent->cli->st_cli.etcd_prefix+
-            "/config/inode/"+std::to_string(INODE_POOL(cur))+
-            "/"+std::to_string(INODE_NO_POOL(cur))
-        );
-        parent->waiting++;
-        parent->cli->st_cli.etcd_txn(json11::Json::object {
-            { "compare", json11::Json::array {
-                json11::Json::object {
-                    { "target", "MOD" },
-                    { "key", cur_cfg_key },
-                    { "result", "LESS" },
-                    { "mod_revision", cur_cfg->mod_revision+1 },
-                },
-            } },
-            { "success", json11::Json::array {
-                json11::Json::object {
-                    { "request_delete_range", json11::Json::object {
-                        { "key", cur_cfg_key },
-                    } },
-                },
-                json11::Json::object {
-                    { "request_delete_range", json11::Json::object {
-                        { "key", base64_encode(parent->cli->st_cli.etcd_prefix+"/index/image/"+cur_name) },
-                    } },
-                },
-            } },
-        }, ETCD_SLOW_TIMEOUT, [this, cur_name](std::string err, json11::Json res)
-        {
-            parent->waiting--;
-            if (err != "")
-            {
-                fprintf(stderr, "Error deleting %s: %s\n", cur_name.c_str(), err.c_str());
-                exit(1);
-            }
-            if (!res["succeeded"].bool_value())
-            {
-                fprintf(stderr, "Layer %s configuration was modified during deletion\n", cur_name.c_str());
-                exit(1);
-            }
-            printf("Layer %s deleted\n", cur_name.c_str());
-            parent->ringloop->wakeup();
-        });
-    }
-
-    void start_merge_child(inode_t child_inode, inode_t target_inode)
-    {
-        auto child_it = parent->cli->st_cli.inode_config.find(child_inode);
-        if (child_it == parent->cli->st_cli.inode_config.end())
-        {
-            fprintf(stderr, "Inode %ld disappeared\n", child_inode);
-            exit(1);
-        }
-        auto target_it = parent->cli->st_cli.inode_config.find(target_inode);
-        if (target_it == parent->cli->st_cli.inode_config.end())
-        {
-            fprintf(stderr, "Inode %ld disappeared\n", target_inode);
-            exit(1);
-        }
-        cb = parent->start_merge(json11::Json::object {
-            { "command", json11::Json::array{ "merge-data", from_name, child_it->second.name } },
-            { "target", target_it->second.name },
-            { "delete-source", false },
-            { "cas", use_cas },
-            { "fsync-interval", fsync_interval },
-        });
-    }
-
-    void start_delete_source(inode_t inode)
-    {
-        auto source = parent->cli->st_cli.inode_config.find(inode);
-        if (source == parent->cli->st_cli.inode_config.end())
-        {
-            fprintf(stderr, "Inode %ld disappeared\n", inode);
-            exit(1);
-        }
-        cb = parent->start_rm(json11::Json::object {
-            { "inode", inode },
-            { "pool", (uint64_t)INODE_POOL(inode) },
-            { "fsync-interval", fsync_interval },
-        });
-    }
-};
-
-std::function<bool(void)> cli_tool_t::start_snap_rm(json11::Json cfg)
-{
-    json11::Json::array cmd = cfg["command"].array_items();
-    auto snap_remover = new snap_remover_t();
-    snap_remover->parent = this;
-    snap_remover->from_name = cmd.size() > 1 ? cmd[1].string_value() : "";
-    snap_remover->to_name = cmd.size() > 2 ? cmd[2].string_value() : "";
-    if (snap_remover->from_name == "")
-    {
-        fprintf(stderr, "Layer to remove argument is missing\n");
-        exit(1);
-    }
-    if (snap_remover->to_name == "")
-    {
-        snap_remover->to_name = snap_remover->from_name;
-    }
-    snap_remover->fsync_interval = cfg["fsync-interval"].uint64_value();
-    if (!snap_remover->fsync_interval)
-        snap_remover->fsync_interval = 128;
-    if (!cfg["cas"].is_null())
-        snap_remover->use_cas = cfg["cas"].uint64_value() ? 2 : 0;
-    if (!cfg["writers_stopped"].is_null())
-        snap_remover->writers_stopped = true;
-    return [snap_remover]()
-    {
-        snap_remover->loop();
-        if (snap_remover->is_done())
-        {
-            delete snap_remover;
-            return true;
-        }
-        return false;
-    };
-}

src/cli_status.cpp

@@ -0,0 +1,295 @@
+// Copyright (c) Vitaliy Filippov, 2019+
+// License: VNPL-1.1 (see README.md for details)
+
+#include "cli.h"
+#include "cluster_client.h"
+#include "base64.h"
+#include "pg_states.h"
+
+// Print cluster status:
+// etcd, mon, osd states
+// raw/used space, object states, pool states, pg states
+// client io, recovery io, rebalance io
+struct status_printer_t
+{
+    cli_tool_t *parent;
+
+    int state = 0;
+    json11::Json::array mon_members, osd_stats;
+    json11::Json agg_stats;
+    std::map<pool_id_t, json11::Json::object> pool_stats;
+    json11::Json::array etcd_states;
+
+    bool is_done()
+    {
+        return state == 100;
+    }
+
+    void loop()
+    {
+        if (state == 1)
+            goto resume_1;
+        else if (state == 2)
+            goto resume_2;
+        // etcd states
+        {
+            auto addrs = parent->cli->st_cli.get_addresses();
+            etcd_states.resize(addrs.size());
+            for (int i = 0; i < etcd_states.size(); i++)
+            {
+                parent->waiting++;
+                parent->cli->st_cli.etcd_call_oneshot(
+                    addrs[i], "/maintenance/status", json11::Json::object(),
+                    parent->cli->st_cli.etcd_quick_timeout, [this, i](std::string err, json11::Json res)
+                    {
+                        parent->waiting--;
+                        etcd_states[i] = err != "" ? json11::Json::object{ { "error", err } } : res;
+                        parent->ringloop->wakeup();
+                    }
+                );
+            }
+        }
+        state = 1;
+resume_1:
+        if (parent->waiting > 0)
+            return;
+        // Monitors, OSD states
+        parent->etcd_txn(json11::Json::object {
+            { "success", json11::Json::array {
+                json11::Json::object {
+                    { "request_range", json11::Json::object {
+                        { "key", base64_encode(parent->cli->st_cli.etcd_prefix+"/mon/") },
+                        { "range_end", base64_encode(parent->cli->st_cli.etcd_prefix+"/mon0") },
+                    } },
+                },
+                json11::Json::object {
+                    { "request_range", json11::Json::object {
+                        { "key", base64_encode(
+                            parent->cli->st_cli.etcd_prefix+"/osd/stats/"
+                        ) },
+                        { "range_end", base64_encode(
+                            parent->cli->st_cli.etcd_prefix+"/osd/stats0"
+                        ) },
+                    } },
+                },
+                json11::Json::object {
+                    { "request_range", json11::Json::object {
+                        { "key", base64_encode(parent->cli->st_cli.etcd_prefix+"/stats") },
+                    } },
+                },
+            } },
+        });
+        state = 2;
+resume_2:
+        if (parent->waiting > 0)
+            return;
+        mon_members = parent->etcd_result["responses"][0]["response_range"]["kvs"].array_items();
+        osd_stats = parent->etcd_result["responses"][1]["response_range"]["kvs"].array_items();
+        if (parent->etcd_result["responses"][2]["response_range"]["kvs"].array_items().size() > 0)
+        {
+            agg_stats = parent->cli->st_cli.parse_etcd_kv(parent->etcd_result["responses"][2]["response_range"]["kvs"][0]).value;
+        }
+        int etcd_alive = 0;
+        uint64_t etcd_db_size = 0;
+        std::string etcd_detail;
+        for (int i = 0; i < etcd_states.size(); i++)
+        {
+            if (etcd_states[i]["error"].is_null())
+            {
+                etcd_alive++;
+                etcd_db_size = etcd_states[i]["dbSizeInUse"].uint64_value();
+            }
+        }
+        int mon_count = 0;
+        std::string mon_master;
+        for (int i = 0; i < mon_members.size(); i++)
+        {
+            auto kv = parent->cli->st_cli.parse_etcd_kv(mon_members[i]);
+            kv.key = kv.key.substr(parent->cli->st_cli.etcd_prefix.size());
+            if (kv.key.substr(0, 12) == "/mon/member/")
+                mon_count++;
+            else if (kv.key == "/mon/master")
+            {
+                if (kv.value["hostname"].is_string())
+                    mon_master = kv.value["hostname"].string_value();
+                else
+                    mon_master = kv.value["ip"][0].string_value();
+            }
+        }
+        int osd_count = 0, osd_up = 0;
+        uint64_t total_raw = 0, free_raw = 0, free_down_raw = 0, down_raw = 0;
+        for (int i = 0; i < osd_stats.size(); i++)
+        {
+            auto kv = parent->cli->st_cli.parse_etcd_kv(osd_stats[i]);
+            osd_num_t stat_osd_num = 0;
+            char null_byte = 0;
+            sscanf(kv.key.c_str() + parent->cli->st_cli.etcd_prefix.size(), "/osd/stats/%lu%c", &stat_osd_num, &null_byte);
+            if (!stat_osd_num || null_byte != 0)
+            {
+                fprintf(stderr, "Invalid key in etcd: %s\n", kv.key.c_str());
+                continue;
+            }
+            osd_count++;
+            total_raw += kv.value["size"].uint64_value();
+            free_raw += kv.value["free"].uint64_value();
+            auto peer_it = parent->cli->st_cli.peer_states.find(stat_osd_num);
+            if (peer_it != parent->cli->st_cli.peer_states.end())
+            {
+                osd_up++;
+            }
+            else
+            {
+                down_raw += kv.value["size"].uint64_value();
+                free_down_raw += kv.value["size"].uint64_value();
+            }
+        }
+        int pool_count = 0, pools_active = 0;
+        std::map<std::string, int> pgs_by_state;
+        std::string pgs_by_state_str;
+        for (auto & pool_pair: parent->cli->st_cli.pool_config)
+        {
+            auto & pool_cfg = pool_pair.second;
+            bool active = true;
+            if (pool_cfg.pg_config.size() != pool_cfg.pg_count)
+            {
+                active = false;
+                pgs_by_state["offline"] += pool_cfg.pg_count-pool_cfg.pg_config.size();
+            }
+            pool_count++;
+            for (auto pg_it = pool_cfg.pg_config.begin(); pg_it != pool_cfg.pg_config.end(); pg_it++)
+            {
+                if (!(pg_it->second.cur_state & PG_ACTIVE))
+                {
+                    active = false;
+                }
+                std::string pg_state_str;
+                for (int i = 0; i < pg_state_bit_count; i++)
+                {
+                    if (pg_it->second.cur_state & pg_state_bits[i])
+                    {
+                        pg_state_str += "+";
+                        pg_state_str += pg_state_names[i];
+                    }
+                }
+                if (pg_state_str.size())
+                    pgs_by_state[pg_state_str.substr(1)]++;
+                else
+                    pgs_by_state["offline"]++;
+            }
+            if (active)
+            {
+                pools_active++;
+            }
+        }
+        for (auto & kv: pgs_by_state)
+        {
+            if (pgs_by_state_str.size())
+            {
+                pgs_by_state_str += "\n           ";
+            }
+            pgs_by_state_str += std::to_string(kv.second)+" "+kv.first;
+        }
+        uint64_t object_size = parent->cli->get_bs_block_size();
+        std::string more_states;
+        uint64_t obj_n;
+        obj_n = agg_stats["object_counts"]["misplaced"].uint64_value();
+        if (obj_n > 0)
+            more_states += ", "+format_size(obj_n*object_size)+" misplaced";
+        obj_n = agg_stats["object_counts"]["degraded"].uint64_value();
+        if (obj_n > 0)
+            more_states += ", "+format_size(obj_n*object_size)+" degraded";
+        obj_n = agg_stats["object_counts"]["incomplete"].uint64_value();
+        if (obj_n > 0)
+            more_states += ", "+format_size(obj_n*object_size)+" incomplete";
+        std::string recovery_io;
+        {
+            uint64_t deg_bps = agg_stats["recovery_stats"]["degraded"]["bps"].uint64_value();
+            uint64_t deg_iops = agg_stats["recovery_stats"]["degraded"]["iops"].uint64_value();
+            uint64_t misp_bps = agg_stats["recovery_stats"]["misplaced"]["bps"].uint64_value();
+            uint64_t misp_iops = agg_stats["recovery_stats"]["misplaced"]["iops"].uint64_value();
+            if (deg_iops > 0 || deg_bps > 0)
+                recovery_io += "    recovery:  "+format_size(deg_bps)+"/s, "+format_size(deg_iops, true)+" op/s\n";
+            if (misp_iops > 0 || misp_bps > 0)
+                recovery_io += "    rebalance: "+format_size(misp_bps)+"/s, "+format_size(misp_iops, true)+" op/s\n";
+        }
+        if (parent->json_output)
+        {
+            // JSON output
+            printf("%s\n", json11::Json(json11::Json::object {
+                { "etcd_alive", etcd_alive },
+                { "etcd_count", (uint64_t)etcd_states.size() },
+                { "etcd_db_size", etcd_db_size },
+                { "mon_count", mon_count },
+                { "mon_master", mon_master },
+                { "osd_up", osd_up },
+                { "osd_count", osd_count },
+                { "total_raw", total_raw },
+                { "free_raw", free_raw },
+                { "down_raw", down_raw },
+                { "free_down_raw", free_down_raw },
+                { "clean_data", agg_stats["object_counts"]["clean"].uint64_value() * object_size },
+                { "misplaced_data", agg_stats["object_counts"]["misplaced"].uint64_value() * object_size },
+                { "degraded_data", agg_stats["object_counts"]["degraded"].uint64_value() * object_size },
+                { "incomplete_data", agg_stats["object_counts"]["incomplete"].uint64_value() * object_size },
+                { "pool_count", pool_count },
+                { "active_pool_count", pools_active },
+                { "pg_states", pgs_by_state },
+                { "op_stats", agg_stats["op_stats"] },
+                { "recovery_stats", agg_stats["recovery_stats"] },
+                { "object_counts", agg_stats["object_counts"] },
+            }).dump().c_str());
+            state = 100;
+            return;
+        }
+        printf(
+            "  cluster:\n"
+            "    etcd: %d / %ld up, %s database size\n"
+            "    mon:  %d up%s\n"
+            "    osd:  %d / %d up\n"
+            "  \n"
+            "  data:\n"
+            "    raw:   %s used, %s / %s available%s\n"
+            "    state: %s clean%s\n"
+            "    pools: %d / %d active\n"
+            "    pgs:   %s\n"
+            "  \n"
+            "  io:\n"
+            "    client:%s %s/s rd, %s op/s rd, %s/s wr, %s op/s wr\n"
+            "%s",
+            etcd_alive, etcd_states.size(), format_size(etcd_db_size).c_str(),
+            mon_count, mon_master == "" ? "" : (", master "+mon_master).c_str(),
+            osd_up, osd_count,
+            format_size(total_raw-free_raw).c_str(),
+            format_size(free_raw-free_down_raw).c_str(),
+            format_size(total_raw-down_raw).c_str(),
+            (down_raw > 0 ? (", "+format_size(down_raw)+" down").c_str() : ""),
+            format_size(agg_stats["object_counts"]["clean"].uint64_value() * object_size).c_str(), more_states.c_str(),
+            pools_active, pool_count,
+            pgs_by_state_str.c_str(),
+            recovery_io.size() > 0 ? "   " : "",
+            format_size(agg_stats["op_stats"]["primary_read"]["bps"].uint64_value()).c_str(),
+            format_size(agg_stats["op_stats"]["primary_read"]["iops"].uint64_value(), true).c_str(),
+            format_size(agg_stats["op_stats"]["primary_write"]["bps"].uint64_value()).c_str(),
+            format_size(agg_stats["op_stats"]["primary_write"]["iops"].uint64_value(), true).c_str(),
+            recovery_io.c_str()
+        );
+        state = 100;
+    }
+};
+
+std::function<bool(void)> cli_tool_t::start_status(json11::Json cfg)
+{
+    json11::Json::array cmd = cfg["command"].array_items();
+    auto printer = new status_printer_t();
+    printer->parent = this;
+    return [printer]()
+    {
+        printer->loop();
+        if (printer->is_done())
+        {
+            delete printer;
+            return true;
+        }
+        return false;
+    };
+}

src/cluster_client.cpp

@@ -9,6 +9,7 @@
 #define PART_SENT 1
 #define PART_DONE 2
 #define PART_ERROR 4
+#define PART_RETRY 8
 #define CACHE_DIRTY 1
 #define CACHE_FLUSHING 2
 #define CACHE_REPEATING 3
@@ -143,7 +144,7 @@ void cluster_client_t::calc_wait(cluster_op_t *op)
     }
     else /* if (op->opcode == OSD_OP_READ || op->opcode == OSD_OP_READ_BITMAP) */
     {
-        for (auto prev = op->prev; prev; prev = prev->prev)
+        for (auto prev = op_queue_head; prev && prev != op; prev = prev->next)
         {
             if (prev->opcode == OSD_OP_WRITE && prev->flags & OP_FLUSH_BUFFER)
             {
@@ -151,7 +152,7 @@ void cluster_client_t::calc_wait(cluster_op_t *op)
             }
             else if (prev->opcode == OSD_OP_WRITE || prev->opcode == OSD_OP_READ || prev->opcode == OSD_OP_READ_BITMAP)
             {
-                // Flushes are always in the beginning
+                // Flushes are always in the beginning (we're scanning from the beginning of the queue)
                 break;
             }
         }
@@ -172,6 +173,7 @@ void cluster_client_t::inc_wait(uint64_t opcode, uint64_t flags, cluster_op_t *n
                 (next->opcode == OSD_OP_READ || next->opcode == OSD_OP_READ_BITMAP) && (flags & OP_FLUSH_BUFFER))
             {
                 next->prev_wait += inc;
+                assert(next->prev_wait >= 0);
                 if (!next->prev_wait)
                 {
                     if (next->opcode == OSD_OP_SYNC)
@@ -191,6 +193,7 @@ void cluster_client_t::inc_wait(uint64_t opcode, uint64_t flags, cluster_op_t *n
             if (next->opcode == OSD_OP_SYNC || next->opcode == OSD_OP_WRITE)
             {
                 next->prev_wait += inc;
+                assert(next->prev_wait >= 0);
                 if (!next->prev_wait)
                 {
                     if (next->opcode == OSD_OP_SYNC)
@@ -534,8 +537,8 @@ void cluster_client_t::copy_write(cluster_op_t *op, std::map<object_id, cluster_
             unsigned iov_len = (op->iov.buf[iov_idx].iov_len - iov_pos);
             if (iov_len <= cur_len)
             {
-                memcpy(dirty_it->second.buf + pos - dirty_it->first.stripe,
-                    op->iov.buf[iov_idx].iov_base + iov_pos, iov_len);
+                memcpy((uint8_t*)dirty_it->second.buf + pos - dirty_it->first.stripe,
+                    (uint8_t*)op->iov.buf[iov_idx].iov_base + iov_pos, iov_len);
                 pos += iov_len;
                 len -= iov_len;
                 cur_len -= iov_len;
@@ -544,8 +547,8 @@ void cluster_client_t::copy_write(cluster_op_t *op, std::map<object_id, cluster_
             }
             else
             {
-                memcpy(dirty_it->second.buf + pos - dirty_it->first.stripe,
-                    op->iov.buf[iov_idx].iov_base + iov_pos, cur_len);
+                memcpy((uint8_t*)dirty_it->second.buf + pos - dirty_it->first.stripe,
+                    (uint8_t*)op->iov.buf[iov_idx].iov_base + iov_pos, cur_len);
                 pos += cur_len;
                 len -= cur_len;
                 iov_pos += cur_len;
@@ -668,14 +671,17 @@ resume_2:
             if (!try_send(op, i))
             {
                 // We'll need to retry again
-                op->up_wait = true;
-                if (!retry_timeout_id)
+                if (op->parts[i].flags & PART_RETRY)
                 {
-                    retry_timeout_id = tfd->set_timer(up_wait_retry_interval, false, [this](int)
+                    op->up_wait = true;
+                    if (!retry_timeout_id)
                     {
-                        retry_timeout_id = 0;
-                        continue_ops(true);
-                    });
+                        retry_timeout_id = tfd->set_timer(up_wait_retry_interval, false, [this](int)
+                        {
+                            retry_timeout_id = 0;
+                            continue_ops(true);
+                        });
+                    }
                 }
                 op->state = 2;
             }
@@ -744,7 +750,7 @@ resume_3:
         {
             for (int i = 0; i < op->parts.size(); i++)
             {
-                op->parts[i].flags = 0;
+                op->parts[i].flags = PART_RETRY;
             }
             goto resume_2;
         }
@@ -762,7 +768,7 @@ static void add_iov(int size, bool skip, cluster_op_t *op, int &iov_idx, size_t
         {
             if (!skip)
             {
-                iov.push_back(op->iov.buf[iov_idx].iov_base + iov_pos, cur_left);
+                iov.push_back((uint8_t*)op->iov.buf[iov_idx].iov_base + iov_pos, cur_left);
             }
             left -= cur_left;
             iov_pos = 0;
@@ -772,7 +778,7 @@ static void add_iov(int size, bool skip, cluster_op_t *op, int &iov_idx, size_t
         {
             if (!skip)
             {
-                iov.push_back(op->iov.buf[iov_idx].iov_base + iov_pos, left);
+                iov.push_back((uint8_t*)op->iov.buf[iov_idx].iov_base + iov_pos, left);
             }
             iov_pos += left;
             left = 0;
@@ -817,7 +823,7 @@ void cluster_client_t::slice_rw(cluster_op_t *op)
                 // First allocation
                 memset(op->bitmap_buf, 0, object_bitmap_size);
             }
-            op->part_bitmaps = op->bitmap_buf + object_bitmap_size;
+            op->part_bitmaps = (uint8_t*)op->bitmap_buf + object_bitmap_size;
             op->bitmap_buf_size = bitmap_mem;
         }
     }
@@ -839,7 +845,7 @@ void cluster_client_t::slice_rw(cluster_op_t *op)
             while (cur < end)
             {
                 unsigned bmp_loc = (cur - op->offset)/bs_bitmap_granularity;
-                bool skip = (((*(uint8_t*)(op->bitmap_buf + bmp_loc/8)) >> (bmp_loc%8)) & 0x1);
+                bool skip = (((*((uint8_t*)op->bitmap_buf + bmp_loc/8)) >> (bmp_loc%8)) & 0x1);
                 if (skip_prev != skip)
                 {
                     if (cur > prev)
@@ -944,7 +950,7 @@ bool cluster_client_t::try_send(cluster_op_t *op, int i)
                     .meta_revision = meta_rev,
                     .version = op->opcode == OSD_OP_WRITE || op->opcode == OSD_OP_DELETE ? op->version : 0,
                 } },
-                .bitmap = (op->opcode == OSD_OP_READ || op->opcode == OSD_OP_READ_BITMAP ? op->part_bitmaps + pg_bitmap_size*i : NULL),
+                .bitmap = (op->opcode == OSD_OP_READ || op->opcode == OSD_OP_READ_BITMAP ? (uint8_t*)op->part_bitmaps + pg_bitmap_size*i : NULL),
                 .bitmap_len = (unsigned)(op->opcode == OSD_OP_READ || op->opcode == OSD_OP_READ_BITMAP ? pg_bitmap_size : 0),
                 .callback = [this, part](osd_op_t *op_part)
                 {
@@ -1155,7 +1161,7 @@ void cluster_client_t::copy_part_bitmap(cluster_op_t *op, cluster_op_part_t *par
     if (!(object_offset & 0x7) && !(part_offset & 0x7) && (part_len >= 8))
     {
         // Copy bytes
-        mem_or(op->bitmap_buf + object_offset/8, part->op.bitmap + part_offset/8, part_len/8);
+        mem_or((uint8_t*)op->bitmap_buf + object_offset/8, (uint8_t*)part->op.bitmap + part_offset/8, part_len/8);
         object_offset += (part_len & ~0x7);
         part_offset += (part_len & ~0x7);
         part_len = (part_len & 0x7);
@@ -1163,8 +1169,8 @@ void cluster_client_t::copy_part_bitmap(cluster_op_t *op, cluster_op_part_t *par
     while (part_len > 0)
     {
         // Copy bits
-        (*(uint8_t*)(op->bitmap_buf + (object_offset >> 3))) |= (
-            (((*(uint8_t*)(part->op.bitmap + (part_offset >> 3))) >> (part_offset & 0x7)) & 0x1) << (object_offset & 0x7)
+        (*((uint8_t*)op->bitmap_buf + (object_offset >> 3))) |= (
+            (((*((uint8_t*)part->op.bitmap + (part_offset >> 3))) >> (part_offset & 0x7)) & 0x1) << (object_offset & 0x7)
         );
         part_offset++;
         object_offset++;

src/cluster_client_list.cpp

@@ -200,7 +200,8 @@ void cluster_client_t::send_list(inode_list_osd_t *cur_list)
     auto & pool_cfg = st_cli.pool_config[cur_list->pg->lst->pool_id];
     osd_op_t *op = new osd_op_t();
     op->op_type = OSD_OP_OUT;
-    op->peer_fd = msgr.osd_peer_fds[cur_list->osd_num];
+    // Already checked that it exists above, but anyway
+    op->peer_fd = msgr.osd_peer_fds.at(cur_list->osd_num);
     op->req = (osd_any_op_t){
         .sec_list = {
             .header = {

src/dump_journal.cpp

@@ -75,7 +75,7 @@ int main(int argc, char *argv[])
             uint64_t s;
             for (s = 0; s < self.journal_block; s += 8)
             {
-                if (*((uint64_t*)(data+s)) != 0)
+                if (*((uint64_t*)((uint8_t*)data+s)) != 0)
                     break;
             }
             if (s == self.journal_block)
@@ -139,7 +139,7 @@ int journal_dump_t::dump_block(void *buf)
     bool wrapped = false;
     while (pos < journal_block)
     {
-        journal_entry *je = (journal_entry*)(buf + pos);
+        journal_entry *je = (journal_entry*)((uint8_t*)buf + pos);
         if (je->magic != JOURNAL_MAGIC || je->type < JE_MIN || je->type > JE_MAX ||
             !all && started && je->crc32_prev != crc32_last)
         {

src/epoll_manager.cpp

@@ -13,6 +13,7 @@
 epoll_manager_t::epoll_manager_t(ring_loop_t *ringloop)
 {
     this->ringloop = ringloop;
+    this->pending = false;
 
     epoll_fd = epoll_create(1);
     if (epoll_fd < 0)
@@ -22,11 +23,19 @@ epoll_manager_t::epoll_manager_t(ring_loop_t *ringloop)
 
     tfd = new timerfd_manager_t([this](int fd, bool wr, std::function<void(int, int)> handler) { set_fd_handler(fd, wr, handler); });
 
+    consumer.loop = [this]()
+    {
+        if (pending)
+            handle_epoll_events();
+    };
+    ringloop->register_consumer(&consumer);
+
     handle_epoll_events();
 }
 
 epoll_manager_t::~epoll_manager_t()
 {
+    ringloop->unregister_consumer(&consumer);
     if (tfd)
     {
         delete tfd;
@@ -64,8 +73,13 @@ void epoll_manager_t::handle_epoll_events()
     io_uring_sqe *sqe = ringloop->get_sqe();
     if (!sqe)
     {
-        throw std::runtime_error("can't get SQE, will fall out of sync with EPOLLET");
+        // Don't handle epoll events until we manage to post the next event handler
+        // otherwise we'll fall out of sync with EPOLLET
+        pending = true;
+        ringloop->wakeup();
+        return;
     }
+    pending = false;
     ring_data_t *data = ((ring_data_t*)sqe->user_data);
     my_uring_prep_poll_add(sqe, epoll_fd, POLLIN);
     data->callback = [this](ring_data_t *data)

src/epoll_manager.h

@@ -11,6 +11,8 @@
 class epoll_manager_t
 {
     int epoll_fd;
+    bool pending;
+    ring_consumer_t consumer;
     ring_loop_t *ringloop;
     std::map<int, std::function<void(int, int)>> epoll_handlers;
 public:

src/etcd_state_client.cpp

@@ -5,6 +5,7 @@
 #include "pg_states.h"
 #include "etcd_state_client.h"
 #ifndef __MOCK__
+#include "addr_util.h"
 #include "http_client.h"
 #include "base64.h"
 #endif
@@ -25,9 +26,14 @@ etcd_state_client_t::~etcd_state_client_t()
 #ifndef __MOCK__
     if (etcd_watch_ws)
     {
-        etcd_watch_ws->close();
+        http_close(etcd_watch_ws);
         etcd_watch_ws = NULL;
     }
+    if (keepalive_client)
+    {
+        http_close(keepalive_client);
+        keepalive_client = NULL;
+    }
 #endif
 }
 
@@ -48,12 +54,54 @@ etcd_kv_t etcd_state_client_t::parse_etcd_kv(const json11::Json & kv_json)
     return kv;
 }
 
-void etcd_state_client_t::etcd_txn(json11::Json txn, int timeout, std::function<void(std::string, json11::Json)> callback)
+void etcd_state_client_t::etcd_txn(json11::Json txn, int timeout, int retries, int interval, std::function<void(std::string, json11::Json)> callback)
 {
-    etcd_call("/kv/txn", txn, timeout, callback);
+    etcd_call("/kv/txn", txn, timeout, retries, interval, callback);
 }
 
-void etcd_state_client_t::etcd_call(std::string api, json11::Json payload, int timeout, std::function<void(std::string, json11::Json)> callback)
+void etcd_state_client_t::etcd_txn_slow(json11::Json txn, std::function<void(std::string, json11::Json)> callback)
+{
+    etcd_call("/kv/txn", txn, etcd_slow_timeout, max_etcd_attempts, 0, callback);
+}
+
+std::vector<std::string> etcd_state_client_t::get_addresses()
+{
+    auto addrs = etcd_local;
+    addrs.insert(addrs.end(), etcd_addresses.begin(), etcd_addresses.end());
+    return addrs;
+}
+
+void etcd_state_client_t::etcd_call_oneshot(std::string etcd_address, std::string api, json11::Json payload,
+    int timeout, std::function<void(std::string, json11::Json)> callback)
+{
+    std::string etcd_api_path;
+    int pos = etcd_address.find('/');
+    if (pos >= 0)
+    {
+        etcd_api_path = etcd_address.substr(pos);
+        etcd_address = etcd_address.substr(0, pos);
+    }
+    std::string req = payload.dump();
+    req = "POST "+etcd_api_path+api+" HTTP/1.1\r\n"
+        "Host: "+etcd_address+"\r\n"
+        "Content-Type: application/json\r\n"
+        "Content-Length: "+std::to_string(req.size())+"\r\n"
+        "Connection: close\r\n"
+        "\r\n"+req;
+    auto http_cli = http_init(tfd);
+    auto cb = [this, http_cli, callback](const http_response_t *response)
+    {
+        std::string err;
+        json11::Json data;
+        response->parse_json_response(err, data);
+        callback(err, data);
+        http_close(http_cli);
+    };
+    http_request(http_cli, etcd_address, req, { .timeout = timeout }, cb);
+}
+
+void etcd_state_client_t::etcd_call(std::string api, json11::Json payload, int timeout,
+    int retries, int interval, std::function<void(std::string, json11::Json)> callback)
 {
     if (!etcd_addresses.size() && !etcd_local.size())
     {
@@ -74,14 +122,49 @@ void etcd_state_client_t::etcd_call(std::string api, json11::Json payload, int t
         "Host: "+etcd_address+"\r\n"
         "Content-Type: application/json\r\n"
         "Content-Length: "+std::to_string(req.size())+"\r\n"
-        "Connection: close\r\n"
+        "Connection: keep-alive\r\n"
+        "Keep-Alive: timeout="+std::to_string(etcd_keepalive_timeout)+"\r\n"
         "\r\n"+req;
-    http_request_json(tfd, etcd_address, req, timeout, [this, cur_addr = selected_etcd_address, callback](std::string err, json11::Json data)
+    auto cb = [this, api, payload, timeout, retries, interval, callback,
+        cur_addr = selected_etcd_address](const http_response_t *response)
     {
-        if (err != "" && cur_addr == selected_etcd_address)
-            selected_etcd_address = "";
-        callback(err, data);
-    });
+        std::string err;
+        json11::Json data;
+        response->parse_json_response(err, data);
+        if (err != "")
+        {
+            if (cur_addr == selected_etcd_address)
+                selected_etcd_address = "";
+            if (retries > 0)
+            {
+                if (this->log_level > 0)
+                {
+                    printf(
+                        "Warning: etcd request failed: %s, retrying %d more times\n",
+                        err.c_str(), retries
+                    );
+                }
+                if (interval > 0)
+                {
+                    tfd->set_timer(interval, false, [this, api, payload, timeout, retries, interval, callback](int)
+                    {
+                        etcd_call(api, payload, timeout, retries-1, interval, callback);
+                    });
+                }
+                else
+                    etcd_call(api, payload, timeout, retries-1, interval, callback);
+            }
+            else
+                callback(err, data);
+        }
+        else
+            callback(err, data);
+    };
+    if (!keepalive_client)
+    {
+        keepalive_client = http_init(tfd);
+    }
+    http_request(keepalive_client, etcd_address, req, { .timeout = timeout, .keepalive = true }, cb);
 }
 
 void etcd_state_client_t::add_etcd_url(std::string addr)
@@ -155,6 +238,33 @@ void etcd_state_client_t::parse_config(const json11::Json & config)
         this->etcd_prefix = "/"+this->etcd_prefix;
     }
     this->log_level = config["log_level"].int64_value();
+    this->etcd_keepalive_timeout = config["etcd_keepalive_timeout"].uint64_value();
+    if (this->etcd_keepalive_timeout <= 0)
+    {
+        this->etcd_keepalive_timeout = config["etcd_report_interval"].uint64_value() * 2;
+        if (this->etcd_keepalive_timeout < 30)
+            this->etcd_keepalive_timeout = 30;
+    }
+    this->etcd_ws_keepalive_interval = config["etcd_ws_keepalive_interval"].uint64_value();
+    if (this->etcd_ws_keepalive_interval <= 0)
+    {
+        this->etcd_ws_keepalive_interval = 30;
+    }
+    this->max_etcd_attempts = config["max_etcd_attempts"].uint64_value();
+    if (this->max_etcd_attempts <= 0)
+    {
+        this->max_etcd_attempts = 5;
+    }
+    this->etcd_slow_timeout = config["etcd_slow_timeout"].uint64_value();
+    if (this->etcd_slow_timeout <= 0)
+    {
+        this->etcd_slow_timeout = 5000;
+    }
+    this->etcd_quick_timeout = config["etcd_quick_timeout"].uint64_value();
+    if (this->etcd_quick_timeout <= 0)
+    {
+        this->etcd_quick_timeout = 1000;
+    }
 }
 
 void etcd_state_client_t::pick_next_etcd()
@@ -169,9 +279,16 @@ void etcd_state_client_t::pick_next_etcd()
         std::vector<int> ns;
         for (int i = 0; i < etcd_addresses.size(); i++)
             ns.push_back(i);
+        if (!rand_initialized)
+        {
+            timespec tv;
+            clock_gettime(CLOCK_REALTIME, &tv);
+            srand48(tv.tv_sec*1000000000 + tv.tv_nsec);
+            rand_initialized = true;
+        }
         while (ns.size())
         {
-            int i = rand() % ns.size();
+            int i = lrand48() % ns.size();
             addresses_to_try.push_back(etcd_addresses[ns[i]]);
             ns.erase(ns.begin()+i, ns.begin()+i+1);
         }
@@ -200,10 +317,12 @@ void etcd_state_client_t::start_etcd_watcher()
     ws_alive = 1;
     if (etcd_watch_ws)
     {
-        etcd_watch_ws->close();
+        http_close(etcd_watch_ws);
         etcd_watch_ws = NULL;
     }
-    etcd_watch_ws = open_websocket(tfd, etcd_address, etcd_api_path+"/watch", ETCD_SLOW_TIMEOUT,
+    if (this->log_level > 1)
+        printf("Trying to connect to etcd websocket at %s\n", etcd_address.c_str());
+    etcd_watch_ws = open_websocket(tfd, etcd_address, etcd_api_path+"/watch", etcd_slow_timeout,
         [this, cur_addr = selected_etcd_address](const http_response_t *msg)
     {
         if (msg->body.length())
@@ -219,6 +338,8 @@ void etcd_state_client_t::start_etcd_watcher()
             {
                 if (data["result"]["created"].bool_value())
                 {
+                    if (etcd_watches_initialised == 3 && this->log_level > 0)
+                        fprintf(stderr, "Successfully subscribed to etcd at %s\n", selected_etcd_address.c_str());
                     etcd_watches_initialised++;
                 }
                 if (data["result"]["canceled"].bool_value())
@@ -232,8 +353,11 @@ void etcd_state_client_t::start_etcd_watcher()
                         {
                             fprintf(stderr, "Revisions before %lu were compacted by etcd, reloading state\n",
                                 data["result"]["compact_revision"].uint64_value());
-                            etcd_watch_ws->close();
-                            etcd_watch_ws = NULL;
+                            if (etcd_watch_ws)
+                            {
+                                http_close(etcd_watch_ws);
+                                etcd_watch_ws = NULL;
+                            }
                             etcd_watch_revision = 0;
                             on_reload_hook();
                         }
@@ -284,13 +408,20 @@ void etcd_state_client_t::start_etcd_watcher()
         {
             if (cur_addr == selected_etcd_address)
             {
+                fprintf(stderr, "Disconnected from etcd %s\n", selected_etcd_address.c_str());
                 selected_etcd_address = "";
             }
-            etcd_watch_ws = NULL;
+            else
+                fprintf(stderr, "Disconnected from etcd\n");
+            if (etcd_watch_ws)
+            {
+                http_close(etcd_watch_ws);
+                etcd_watch_ws = NULL;
+            }
             if (etcd_watches_initialised == 0)
             {
-                // Connection not established, retry in <ETCD_QUICK_TIMEOUT>
-                tfd->set_timer(ETCD_QUICK_TIMEOUT, false, [this](int)
+                // Connection not established, retry in <etcd_quick_timeout>
+                tfd->set_timer(etcd_quick_timeout, false, [this](int)
                 {
                     start_etcd_watcher();
                 });
@@ -302,7 +433,7 @@ void etcd_state_client_t::start_etcd_watcher()
             }
         }
     });
-    etcd_watch_ws->post_message(WS_TEXT, json11::Json(json11::Json::object {
+    http_post_message(etcd_watch_ws, WS_TEXT, json11::Json(json11::Json::object {
         { "create_request", json11::Json::object {
             { "key", base64_encode(etcd_prefix+"/config/") },
             { "range_end", base64_encode(etcd_prefix+"/config0") },
@@ -311,7 +442,7 @@ void etcd_state_client_t::start_etcd_watcher()
             { "progress_notify", true },
         } }
     }).dump());
-    etcd_watch_ws->post_message(WS_TEXT, json11::Json(json11::Json::object {
+    http_post_message(etcd_watch_ws, WS_TEXT, json11::Json(json11::Json::object {
         { "create_request", json11::Json::object {
             { "key", base64_encode(etcd_prefix+"/osd/state/") },
             { "range_end", base64_encode(etcd_prefix+"/osd/state0") },
@@ -320,7 +451,7 @@ void etcd_state_client_t::start_etcd_watcher()
             { "progress_notify", true },
         } }
     }).dump());
-    etcd_watch_ws->post_message(WS_TEXT, json11::Json(json11::Json::object {
+    http_post_message(etcd_watch_ws, WS_TEXT, json11::Json(json11::Json::object {
         { "create_request", json11::Json::object {
             { "key", base64_encode(etcd_prefix+"/pg/state/") },
             { "range_end", base64_encode(etcd_prefix+"/pg/state0") },
@@ -329,7 +460,7 @@ void etcd_state_client_t::start_etcd_watcher()
             { "progress_notify", true },
         } }
     }).dump());
-    etcd_watch_ws->post_message(WS_TEXT, json11::Json(json11::Json::object {
+    http_post_message(etcd_watch_ws, WS_TEXT, json11::Json(json11::Json::object {
         { "create_request", json11::Json::object {
             { "key", base64_encode(etcd_prefix+"/pg/history/") },
             { "range_end", base64_encode(etcd_prefix+"/pg/history0") },
@@ -340,7 +471,7 @@ void etcd_state_client_t::start_etcd_watcher()
     }).dump());
     if (ws_keepalive_timer < 0)
     {
-        ws_keepalive_timer = tfd->set_timer(ETCD_KEEPALIVE_TIMEOUT, true, [this](int)
+        ws_keepalive_timer = tfd->set_timer(etcd_ws_keepalive_interval*1000, true, [this](int)
         {
             if (!etcd_watch_ws)
             {
@@ -348,14 +479,21 @@ void etcd_state_client_t::start_etcd_watcher()
             }
             else if (!ws_alive)
             {
-                etcd_watch_ws->close();
-                etcd_watch_ws = NULL;
+                if (this->log_level > 0)
+                {
+                    fprintf(stderr, "Websocket ping failed, disconnecting from etcd %s\n", selected_etcd_address.c_str());
+                }
+                if (etcd_watch_ws)
+                {
+                    http_close(etcd_watch_ws);
+                    etcd_watch_ws = NULL;
+                }
                 start_etcd_watcher();
             }
             else
             {
                 ws_alive = 0;
-                etcd_watch_ws->post_message(WS_TEXT, json11::Json(json11::Json::object {
+                http_post_message(etcd_watch_ws, WS_TEXT, json11::Json(json11::Json::object {
                     { "progress_request", json11::Json::object { } }
                 }).dump());
             }
@@ -367,12 +505,12 @@ void etcd_state_client_t::load_global_config()
 {
     etcd_call("/kv/range", json11::Json::object {
         { "key", base64_encode(etcd_prefix+"/config/global") }
-    }, ETCD_SLOW_TIMEOUT, [this](std::string err, json11::Json data)
+    }, etcd_slow_timeout, max_etcd_attempts, 0, [this](std::string err, json11::Json data)
     {
         if (err != "")
         {
             fprintf(stderr, "Error reading OSD configuration from etcd: %s\n", err.c_str());
-            tfd->set_timer(ETCD_SLOW_TIMEOUT, false, [this](int timer_id)
+            tfd->set_timer(etcd_slow_timeout, false, [this](int timer_id)
             {
                 load_global_config();
             });
@@ -440,12 +578,13 @@ void etcd_state_client_t::load_pgs()
     {
         req["compare"] = checks;
     }
-    etcd_txn(req, ETCD_SLOW_TIMEOUT, [this](std::string err, json11::Json data)
+    etcd_txn_slow(req, [this](std::string err, json11::Json data)
     {
         if (err != "")
         {
+            // Retry indefinitely
             fprintf(stderr, "Error loading PGs from etcd: %s\n", err.c_str());
-            tfd->set_timer(ETCD_SLOW_TIMEOUT, false, [this](int timer_id)
+            tfd->set_timer(etcd_slow_timeout, false, [this](int timer_id)
             {
                 load_pgs();
             });
@@ -829,7 +968,7 @@ void etcd_state_client_t::parse_state(const etcd_kv_t & kv)
                     {
                         fprintf(
                             stderr, "Inode %lu/%lu parent_pool value is invalid, ignoring parent setting\n",
-                            inode_num >> (64-POOL_ID_BITS), inode_num & ((1l << (64-POOL_ID_BITS)) - 1)
+                            inode_num >> (64-POOL_ID_BITS), inode_num & (((uint64_t)1 << (64-POOL_ID_BITS)) - 1)
                         );
                         parent_inode_num = 0;
                     }

src/etcd_state_client.h

@@ -12,11 +12,6 @@
 #define ETCD_PG_HISTORY_WATCH_ID 3
 #define ETCD_OSD_STATE_WATCH_ID 4
 
-#define MAX_ETCD_ATTEMPTS 5
-#define ETCD_SLOW_TIMEOUT 5000
-#define ETCD_QUICK_TIMEOUT 1000
-#define ETCD_KEEPALIVE_TIMEOUT 30000
-
 #define DEFAULT_BLOCK_SIZE 128*1024
 
 struct etcd_kv_t
@@ -71,7 +66,7 @@ struct inode_watch_t
     inode_config_t cfg;
 };
 
-struct websocket_t;
+struct http_co_t;
 
 struct etcd_state_client_t
 {
@@ -82,13 +77,20 @@ protected:
     std::string selected_etcd_address;
     std::vector<std::string> addresses_to_try;
     std::vector<inode_watch_t*> watches;
-    websocket_t *etcd_watch_ws = NULL;
+    http_co_t *etcd_watch_ws = NULL, *keepalive_client = NULL;
     int ws_keepalive_timer = -1;
     int ws_alive = 0;
+    bool rand_initialized = false;
     uint64_t bs_block_size = DEFAULT_BLOCK_SIZE;
     void add_etcd_url(std::string);
     void pick_next_etcd();
 public:
+    int etcd_keepalive_timeout = 30;
+    int etcd_ws_keepalive_interval = 30;
+    int max_etcd_attempts = 5;
+    int etcd_quick_timeout = 1000;
+    int etcd_slow_timeout = 5000;
+
     std::string etcd_prefix;
     int log_level = 0;
     timerfd_manager_t *tfd = NULL;
@@ -110,8 +112,11 @@ public:
 
     json11::Json::object serialize_inode_cfg(inode_config_t *cfg);
     etcd_kv_t parse_etcd_kv(const json11::Json & kv_json);
-    void etcd_call(std::string api, json11::Json payload, int timeout, std::function<void(std::string, json11::Json)> callback);
-    void etcd_txn(json11::Json txn, int timeout, std::function<void(std::string, json11::Json)> callback);
+    std::vector<std::string> get_addresses();
+    void etcd_call_oneshot(std::string etcd_address, std::string api, json11::Json payload, int timeout, std::function<void(std::string, json11::Json)> callback);
+    void etcd_call(std::string api, json11::Json payload, int timeout, int retries, int interval, std::function<void(std::string, json11::Json)> callback);
+    void etcd_txn(json11::Json txn, int timeout, int retries, int interval, std::function<void(std::string, json11::Json)> callback);
+    void etcd_txn_slow(json11::Json txn, std::function<void(std::string, json11::Json)> callback);
     void start_etcd_watcher();
     void load_global_config();
     void load_pgs();

src/fio_cluster.cpp

@@ -214,14 +214,14 @@ static int sec_setup(struct thread_data *td)
 
     if (!o->image)
     {
-        if (!(o->inode & ((1l << (64-POOL_ID_BITS)) - 1)))
+        if (!(o->inode & (((uint64_t)1 << (64-POOL_ID_BITS)) - 1)))
         {
             td_verror(td, EINVAL, "inode number is missing");
             return 1;
         }
         if (o->pool)
         {
-            o->inode = (o->inode & ((1l << (64-POOL_ID_BITS)) - 1)) | (o->pool << (64-POOL_ID_BITS));
+            o->inode = (o->inode & (((uint64_t)1 << (64-POOL_ID_BITS)) - 1)) | (o->pool << (64-POOL_ID_BITS));
         }
         if (!(o->inode >> (64-POOL_ID_BITS)))
         {
@@ -247,6 +247,12 @@ static int sec_setup(struct thread_data *td)
             vitastor_c_uring_wait_events(bsd->cli);
         }
         td->files[0]->real_file_size = vitastor_c_inode_get_size(bsd->watch);
+        if (!vitastor_c_inode_get_num(bsd->watch) ||
+            !td->files[0]->real_file_size)
+        {
+            td_verror(td, EINVAL, "image does not exist");
+            return 1;
+        }
     }
 
     bsd->trace = o->trace ? true : false;
@@ -345,9 +351,9 @@ static enum fio_q_status sec_queue(struct thread_data *td, struct io_u *io)
         }
         else
         {
-            printf("+++ %s 0x%lx 0x%llx+%llx\n",
+            printf("+++ %s 0x%lx 0x%llx+%lx\n",
                 io->ddir == DDIR_READ ? "READ" : "WRITE",
-                (uint64_t)io, io->offset, io->xfer_buflen);
+                (uint64_t)io, io->offset, (uint64_t)io->xfer_buflen);
         }
     }
 

src/fio_engine.cpp

@@ -26,9 +26,8 @@
 
 #include "blockstore.h"
 #include "epoll_manager.h"
-#include "fio_headers.h"
-
 #include "json11/json11.hpp"
+#include "fio_headers.h"
 
 struct bs_data
 {
@@ -150,7 +149,6 @@ static int bs_init(struct thread_data *td)
 static enum fio_q_status bs_queue(struct thread_data *td, struct io_u *io)
 {
     bs_data *bsd = (bs_data*)td->io_ops_data;
-    int n = bsd->op_n;
     if (io->ddir == DDIR_SYNC && bsd->last_sync)
     {
         return FIO_Q_COMPLETED;
@@ -178,7 +176,7 @@ static enum fio_q_status bs_queue(struct thread_data *td, struct io_u *io)
         op->version = UINT64_MAX; // last unstable
         op->offset = io->offset % bsd->bs->get_block_size();
         op->len = io->xfer_buflen;
-        op->callback = [io, n](blockstore_op_t *op)
+        op->callback = [io](blockstore_op_t *op)
         {
             io->error = op->retval < 0 ? -op->retval : 0;
             bs_data *bsd = (bs_data*)io->engine_data;
@@ -200,7 +198,7 @@ static enum fio_q_status bs_queue(struct thread_data *td, struct io_u *io)
         op->version = 0; // assign automatically
         op->offset = io->offset % bsd->bs->get_block_size();
         op->len = io->xfer_buflen;
-        op->callback = [io, n](blockstore_op_t *op)
+        op->callback = [io](blockstore_op_t *op)
         {
             io->error = op->retval < 0 ? -op->retval : 0;
             bs_data *bsd = (bs_data*)io->engine_data;
@@ -215,7 +213,7 @@ static enum fio_q_status bs_queue(struct thread_data *td, struct io_u *io)
         break;
     case DDIR_SYNC:
         op->opcode = BS_OP_SYNC_STAB_ALL;
-        op->callback = [io, n](blockstore_op_t *op)
+        op->callback = [io](blockstore_op_t *op)
         {
             bs_data *bsd = (bs_data*)io->engine_data;
             io->error = op->retval < 0 ? -op->retval : 0;
@@ -230,6 +228,7 @@ static enum fio_q_status bs_queue(struct thread_data *td, struct io_u *io)
         break;
     default:
         io->error = EINVAL;
+        delete op;
         return FIO_Q_COMPLETED;
     }
 

src/fio_headers.h

@@ -1,4 +1,3 @@
-extern "C" {
 // Kill atomics in fio headers
 #define _STDATOMIC_H
 #include "fio/arch/arch.h"
@@ -11,6 +10,7 @@ extern "C" {
 #define CONFIG_HAVE_GETTID
 #define CONFIG_SYNC_FILE_RANGE
 #define CONFIG_PWRITEV2
+extern "C" {
 #include "fio/fio.h"
 #include "fio/optgroup.h"
 }

src/fio_sec_osd.cpp

@@ -170,14 +170,14 @@ static int sec_init(struct thread_data *td)
     bsd->block_order = o->block_order == 0 ? 17 : o->block_order;
     bsd->block_size = 1 << o->block_order;
 
-    sockaddr addr;
+    sockaddr_storage addr;
     if (!string_to_addr(std::string(o->host ? o->host : "127.0.0.1"), false, o->port > 0 ? o->port : 11203, &addr))
     {
         fprintf(stderr, "server address: %s is not valid\n", o->host ? o->host : "127.0.0.1");
         return 1;
     }
 
-    bsd->connect_fd = socket(addr.sa_family, SOCK_STREAM, 0);
+    bsd->connect_fd = socket(addr.ss_family, SOCK_STREAM, 0);
     if (bsd->connect_fd < 0)
     {
         perror("socket");
@@ -192,11 +192,16 @@ static int sec_init(struct thread_data *td)
     setsockopt(bsd->connect_fd, SOL_TCP, TCP_NODELAY, &one, sizeof(one));
     if (o->zerocopy_send)
     {
+#ifndef SO_ZEROCOPY
+        perror("zerocopy send not supported on your system (socket.h misses SO_ZEROCOPY)");
+        return 1;
+#else
         if (setsockopt(bsd->connect_fd, SOL_SOCKET, SO_ZEROCOPY, &one, sizeof(one)) < 0)
         {
             perror("setsockopt zerocopy");
             return 1;
         }
+#endif
     }
 
     // FIXME: read config (block size) from OSD
@@ -284,6 +289,7 @@ static enum fio_q_status sec_queue(struct thread_data *td, struct io_u *io)
         break;
     default:
         io->error = EINVAL;
+        delete op_buf;
         return FIO_Q_COMPLETED;
     }
 
@@ -305,7 +311,13 @@ static enum fio_q_status sec_queue(struct thread_data *td, struct io_u *io)
         iov[iovcnt++] = { .iov_base = io->xfer_buf, .iov_len = io->xfer_buflen };
         wtotal += io->xfer_buflen;
     }
-    if (sendv_blocking(bsd->connect_fd, iov, iovcnt, opt->zerocopy_send ? MSG_ZEROCOPY : 0) != wtotal)
+    if (sendv_blocking(bsd->connect_fd, iov, iovcnt,
+#ifdef SO_ZEROCOPY
+        opt->zerocopy_send ? MSG_ZEROCOPY : 0
+#else
+        0
+#endif
+    ) != wtotal)
     {
         perror("sendmsg");
         exit(1);
@@ -343,7 +355,7 @@ static int sec_getevents(struct thread_data *td, unsigned int min, unsigned int
         {
             if (reply.hdr.retval != io->xfer_buflen)
             {
-                fprintf(stderr, "Short read: retval = %ld instead of %llu\n", reply.hdr.retval, io->xfer_buflen);
+                fprintf(stderr, "Short read: retval = %ld instead of %lu\n", reply.hdr.retval, (uint64_t)io->xfer_buflen);
                 exit(1);
             }
             // Support bitmap
@@ -368,7 +380,7 @@ static int sec_getevents(struct thread_data *td, unsigned int min, unsigned int
         {
             if (reply.hdr.retval != io->xfer_buflen)
             {
-                fprintf(stderr, "Short write: retval = %ld instead of %llu\n", reply.hdr.retval, io->xfer_buflen);
+                fprintf(stderr, "Short write: retval = %ld instead of %lu\n", reply.hdr.retval, (uint64_t)io->xfer_buflen);
                 exit(1);
             }
         }

src/http_client.cpp

@@ -4,9 +4,7 @@
 #include <netinet/tcp.h>
 #include <sys/epoll.h>
 
-#include <net/if.h>
 #include <arpa/inet.h>
-#include <ifaddrs.h>
 
 #include <ctype.h>
 #include <unistd.h>
@@ -25,11 +23,12 @@
 static std::string trim(const std::string & in);
 static std::string ws_format_frame(int type, uint64_t size);
 static bool ws_parse_frame(std::string & buf, int & type, std::string & res);
+static void parse_http_headers(std::string & res, http_response_t *parsed);
 
-// FIXME: Use keepalive
 struct http_co_t
 {
     timerfd_manager_t *tfd;
+    std::function<void(const http_response_t*)> response_callback;
 
     int request_timeout = 0;
     std::string host;
@@ -37,11 +36,12 @@ struct http_co_t
     std::string ws_outbox;
     std::string response;
     bool want_streaming;
+    bool keepalive;
 
-    http_response_t parsed;
-    uint64_t target_response_size = 0;
+    std::vector<std::function<void()>> keepalive_queue;
 
     int state = 0;
+    std::string connected_host;
     int peer_fd = -1;
     int timeout_id = -1;
     int epoll_events = 0;
@@ -49,10 +49,8 @@ struct http_co_t
     std::vector<char> rbuf;
     iovec read_iov, send_iov;
     msghdr read_msg = { 0 }, send_msg = { 0 };
-
-    std::function<void(const http_response_t*)> callback;
-
-    websocket_t ws;
+    http_response_t parsed;
+    uint64_t target_response_size = 0;
 
     int onstack = 0;
     bool ended = false;
@@ -61,66 +59,41 @@ struct http_co_t
     inline void stackin() { onstack++; }
     inline void stackout() { onstack--; if (!onstack && ended) end(); }
     inline void end() { ended = true; if (!onstack) { delete this; } }
+    void run_cb_and_clear();
     void start_connection();
+    void close_connection();
+    void next_request();
     void handle_events();
     void handle_connect_result();
-    void submit_read();
+    void submit_read(bool check_timeout);
     void submit_send();
     bool handle_read();
     void post_message(int type, const std::string & msg);
+    void send_request(const std::string & host, const std::string & request,
+        const http_options_t & options, std::function<void(const http_response_t *response)> response_callback);
 };
 
+#define HTTP_CO_CLOSED 0
 #define HTTP_CO_CONNECTING 1
 #define HTTP_CO_SENDING_REQUEST 2
 #define HTTP_CO_REQUEST_SENT 3
 #define HTTP_CO_HEADERS_RECEIVED 4
 #define HTTP_CO_WEBSOCKET 5
 #define HTTP_CO_CHUNKED 6
+#define HTTP_CO_KEEPALIVE 7
 
 #define DEFAULT_TIMEOUT 5000
 
-void http_request(timerfd_manager_t *tfd, const std::string & host, const std::string & request,
-    const http_options_t & options, std::function<void(const http_response_t *response)> callback)
+http_co_t *http_init(timerfd_manager_t *tfd)
 {
     http_co_t *handler = new http_co_t();
-    handler->request_timeout = options.timeout < 0 ? 0 : (options.timeout == 0 ? DEFAULT_TIMEOUT : options.timeout);
-    handler->want_streaming = options.want_streaming;
     handler->tfd = tfd;
-    handler->host = host;
-    handler->request = request;
-    handler->callback = callback;
-    handler->ws.co = handler;
-    handler->start_connection();
+    handler->state = HTTP_CO_CLOSED;
+    return handler;
 }
 
-void http_request_json(timerfd_manager_t *tfd, const std::string & host, const std::string & request,
-    int timeout, std::function<void(std::string, json11::Json r)> callback)
-{
-    http_request(tfd, host, request, { .timeout = timeout }, [callback](const http_response_t* res)
-    {
-        if (res->error_code != 0)
-        {
-            callback("Error code: "+std::to_string(res->error_code)+" ("+std::string(strerror(res->error_code))+")", json11::Json());
-            return;
-        }
-        if (res->status_code != 200)
-        {
-            callback("HTTP "+std::to_string(res->status_code)+" "+res->status_line+" body: "+trim(res->body), json11::Json());
-            return;
-        }
-        std::string json_err;
-        json11::Json data = json11::Json::parse(res->body, json_err);
-        if (json_err != "")
-        {
-            callback("Bad JSON: "+json_err+" (response: "+trim(res->body)+")", json11::Json());
-            return;
-        }
-        callback(std::string(), data);
-    });
-}
-
-websocket_t* open_websocket(timerfd_manager_t *tfd, const std::string & host, const std::string & path,
-    int timeout, std::function<void(const http_response_t *msg)> callback)
+http_co_t* open_websocket(timerfd_manager_t *tfd, const std::string & host, const std::string & path,
+    int timeout, std::function<void(const http_response_t *msg)> response_callback)
 {
     std::string request = "GET "+path+" HTTP/1.1\r\n"
         "Host: "+host+"\r\n"
@@ -130,28 +103,166 @@ websocket_t* open_websocket(timerfd_manager_t *tfd, const std::string & host, co
         "Sec-WebSocket-Version: 13\r\n"
         "\r\n";
     http_co_t *handler = new http_co_t();
+    handler->tfd = tfd;
+    handler->state = HTTP_CO_CLOSED;
+    handler->host = host;
     handler->request_timeout = timeout < 0 ? -1 : (timeout == 0 ? DEFAULT_TIMEOUT : timeout);
     handler->want_streaming = false;
-    handler->tfd = tfd;
-    handler->host = host;
+    handler->keepalive = false;
     handler->request = request;
-    handler->callback = callback;
-    handler->ws.co = handler;
+    handler->response_callback = response_callback;
     handler->start_connection();
-    return &handler->ws;
+    return handler;
 }
 
-void websocket_t::post_message(int type, const std::string & msg)
+void http_request(http_co_t *handler, const std::string & host, const std::string & request,
+    const http_options_t & options, std::function<void(const http_response_t *response)> response_callback)
 {
-    co->post_message(type, msg);
+    handler->send_request(host, request, options, response_callback);
 }
 
-void websocket_t::close()
+void http_co_t::run_cb_and_clear()
 {
-    co->end();
+    parsed.eof = true;
+    std::function<void(const http_response_t*)> cb;
+    cb.swap(response_callback);
+    // Call callback after clearing it because otherwise we may hit reenterability problems
+    if (cb != NULL)
+        cb(&parsed);
+    next_request();
+}
+
+void http_co_t::send_request(const std::string & host, const std::string & request,
+    const http_options_t & options, std::function<void(const http_response_t *response)> response_callback)
+{
+    stackin();
+    if (state == HTTP_CO_WEBSOCKET)
+    {
+        stackout();
+        throw std::runtime_error("Attempt to send HTTP request into a websocket or chunked stream");
+    }
+    else if (state != HTTP_CO_KEEPALIVE && state != HTTP_CO_CLOSED)
+    {
+        keepalive_queue.push_back([this, host, request, options, response_callback]()
+        {
+            this->send_request(host, request, options, response_callback);
+        });
+        stackout();
+        return;
+    }
+    if (state == HTTP_CO_KEEPALIVE && connected_host != host)
+    {
+        close_connection();
+    }
+    this->request_timeout = options.timeout < 0 ? 0 : (options.timeout == 0 ? DEFAULT_TIMEOUT : options.timeout);
+    this->want_streaming = options.want_streaming;
+    this->keepalive = options.keepalive;
+    this->host = host;
+    this->request = request;
+    this->response = "";
+    this->sent = 0;
+    this->response_callback = response_callback;
+    this->parsed = {};
+    if (state == HTTP_CO_KEEPALIVE)
+    {
+        state = HTTP_CO_SENDING_REQUEST;
+        submit_send();
+    }
+    else
+    {
+        start_connection();
+    }
+    // Do it _after_ state assignment because set_timer() can actually trigger
+    // other timers and requests (reenterability is our friend)
+    if (request_timeout > 0)
+    {
+        timeout_id = tfd->set_timer(request_timeout, false, [this](int timer_id)
+        {
+            stackin();
+            if (state == HTTP_CO_REQUEST_SENT)
+            {
+                // In case of high CPU load, we may not handle etcd responses in time
+                // For this case, first check the socket and only then terminate request with the timeout
+                submit_read(true);
+            }
+            else
+            {
+                close_connection();
+                parsed = { .error = "HTTP request timed out" };
+                run_cb_and_clear();
+            }
+            stackout();
+        });
+    }
+    stackout();
+}
+
+void http_post_message(http_co_t *handler, int type, const std::string & msg)
+{
+    handler->post_message(type, msg);
+}
+
+void http_co_t::post_message(int type, const std::string & msg)
+{
+    stackin();
+    if (state == HTTP_CO_WEBSOCKET)
+    {
+        request += ws_format_frame(type, msg.size());
+        request += msg;
+        submit_send();
+    }
+    else if (state == HTTP_CO_KEEPALIVE || state == HTTP_CO_CHUNKED)
+    {
+        throw std::runtime_error("Attempt to send websocket message on a regular HTTP connection");
+    }
+    else
+    {
+        ws_outbox += ws_format_frame(type, msg.size());
+        ws_outbox += msg;
+    }
+    stackout();
+}
+
+void http_close(http_co_t *handler)
+{
+    handler->end();
+}
+
+void http_response_t::parse_json_response(std::string & error, json11::Json & r) const
+{
+    if (this->error != "")
+    {
+        error = this->error;
+        r = json11::Json();
+    }
+    else if (status_code != 200)
+    {
+        error = "HTTP "+std::to_string(status_code)+" "+status_line+" body: "+trim(body);
+        r = json11::Json();
+    }
+    else
+    {
+        std::string json_err;
+        json11::Json data = json11::Json::parse(body, json_err);
+        if (json_err != "")
+        {
+            error = "Bad JSON: "+json_err+" (response: "+trim(body)+")";
+            r = json11::Json();
+        }
+        else
+        {
+            error = "";
+            r = data;
+        }
+    }
 }
 
 http_co_t::~http_co_t()
+{
+    close_connection();
+}
+
+void http_co_t::close_connection()
 {
     if (timeout_id >= 0)
     {
@@ -164,63 +275,43 @@ http_co_t::~http_co_t()
         close(peer_fd);
         peer_fd = -1;
     }
-    if (parsed.headers["transfer-encoding"] == "chunked")
-    {
-        int prev = 0, pos = 0;
-        while ((pos = response.find("\r\n", prev)) >= prev)
-        {
-            uint64_t len = strtoull(response.c_str()+prev, NULL, 16);
-            parsed.body += response.substr(pos+2, len);
-            prev = pos+2+len+2;
-        }
-    }
-    else
-    {
-        std::swap(parsed.body, response);
-    }
-    parsed.eof = true;
-    callback(&parsed);
+    state = HTTP_CO_CLOSED;
+    connected_host = "";
+    response = "";
+    epoll_events = 0;
 }
 
 void http_co_t::start_connection()
 {
     stackin();
-    struct sockaddr addr;
+    struct sockaddr_storage addr;
     if (!string_to_addr(host.c_str(), 1, 80, &addr))
     {
-        parsed.error_code = ENXIO;
+        close_connection();
+        parsed = { .error = "Invalid address: "+host };
+        run_cb_and_clear();
         stackout();
-        end();
         return;
     }
-    peer_fd = socket(addr.sa_family, SOCK_STREAM, 0);
+    peer_fd = socket(addr.ss_family, SOCK_STREAM, 0);
     if (peer_fd < 0)
     {
-        parsed.error_code = errno;
+        close_connection();
+        parsed = { .error = std::string("socket: ")+strerror(errno) };
+        run_cb_and_clear();
         stackout();
-        end();
         return;
     }
     fcntl(peer_fd, F_SETFL, fcntl(peer_fd, F_GETFL, 0) | O_NONBLOCK);
-    if (request_timeout > 0)
-    {
-        timeout_id = tfd->set_timer(request_timeout, false, [this](int timer_id)
-        {
-            if (response.length() == 0)
-            {
-                parsed.error_code = ETIME;
-            }
-            end();
-        });
-    }
     epoll_events = 0;
     // Finally call connect
     int r = ::connect(peer_fd, (sockaddr*)&addr, sizeof(addr));
     if (r < 0 && errno != EINPROGRESS)
     {
-        parsed.error_code = errno;
+        close_connection();
+        parsed = { .error = std::string("connect: ")+strerror(errno) };
+        run_cb_and_clear();
         stackout();
-        end();
         return;
     }
     tfd->set_fd_handler(peer_fd, true, [this](int peer_fd, int epoll_events)
@@ -228,6 +319,7 @@ void http_co_t::start_connection()
         this->epoll_events |= epoll_events;
         handle_events();
     });
+    connected_host = host;
     state = HTTP_CO_CONNECTING;
     stackout();
 }
@@ -246,11 +338,14 @@ void http_co_t::handle_events()
             epoll_events &= ~EPOLLOUT;
             if (epoll_events & EPOLLIN)
             {
-                submit_read();
+                submit_read(false);
             }
             else if (epoll_events & (EPOLLRDHUP|EPOLLERR))
             {
-                end();
+                if (state == HTTP_CO_HEADERS_RECEIVED)
+                    std::swap(parsed.body, response);
+                close_connection();
+                run_cb_and_clear();
                 break;
             }
         }
@@ -269,9 +364,10 @@ void http_co_t::handle_connect_result()
     }
     if (result != 0)
     {
-        parsed.error_code = result;
+        close_connection();
+        parsed = { .error = std::string("connect: ")+strerror(result) };
+        run_cb_and_clear();
         stackout();
-        end();
         return;
     }
     int one = 1;
@@ -286,41 +382,6 @@ void http_co_t::handle_connect_result()
     stackout();
 }
 
-void http_co_t::submit_read()
-{
-    stackin();
-    int res;
-    if (rbuf.size() != READ_BUFFER_SIZE)
-    {
-        rbuf.resize(READ_BUFFER_SIZE);
-    }
-    read_iov = { .iov_base = rbuf.data(), .iov_len = READ_BUFFER_SIZE };
-    read_msg.msg_iov = &read_iov;
-    read_msg.msg_iovlen = 1;
-    res = recvmsg(peer_fd, &read_msg, 0);
-    if (res < 0)
-    {
-        res = -errno;
-    }
-    if (res == -EAGAIN)
-    {
-        epoll_events = epoll_events & ~EPOLLIN;
-    }
-    else if (res <= 0)
-    {
-        // < 0 means error, 0 means EOF
-        if (!res)
-            epoll_events = epoll_events & ~EPOLLIN;
-        end();
-    }
-    else
-    {
-        response += std::string(rbuf.data(), res);
-        handle_read();
-    }
-    stackout();
-}
-
 void http_co_t::submit_send()
 {
     stackin();
@@ -336,23 +397,23 @@ again:
         {
             res = -errno;
         }
-        if (res == -EAGAIN)
+        if (res == -EAGAIN || res == -EINTR)
         {
             res = 0;
         }
         else if (res < 0)
         {
+            close_connection();
+            parsed = { .error = std::string("sendmsg: ")+strerror(errno) };
+            run_cb_and_clear();
             stackout();
-            end();
             return;
         }
         sent += res;
         if (state == HTTP_CO_SENDING_REQUEST)
         {
             if (sent >= request.size())
-            {
                 state = HTTP_CO_REQUEST_SENT;
-            }
             else
                 goto again;
         }
@@ -366,6 +427,61 @@ again:
     stackout();
 }
 
+void http_co_t::submit_read(bool check_timeout)
+{
+    stackin();
+    int res;
+again:
+    if (rbuf.size() != READ_BUFFER_SIZE)
+    {
+        rbuf.resize(READ_BUFFER_SIZE);
+    }
+    read_iov = { .iov_base = rbuf.data(), .iov_len = READ_BUFFER_SIZE };
+    read_msg.msg_iov = &read_iov;
+    read_msg.msg_iovlen = 1;
+    res = recvmsg(peer_fd, &read_msg, 0);
+    if (res < 0)
+    {
+        res = -errno;
+    }
+    if (res == -EAGAIN || res == -EINTR)
+    {
+        if (check_timeout)
+        {
+            if (res == -EINTR)
+                goto again;
+            else
+            {
+                // Timeout happened and there is no data to read
+                close_connection();
+                parsed = { .error = "HTTP request timed out" };
+                run_cb_and_clear();
+            }
+        }
+        else
+        {
+            epoll_events = epoll_events & ~EPOLLIN;
+        }
+    }
+    else if (res <= 0)
+    {
+        // < 0 means error, 0 means EOF
+        epoll_events = epoll_events & ~EPOLLIN;
+        if (state == HTTP_CO_HEADERS_RECEIVED)
+            std::swap(parsed.body, response);
+        close_connection();
+        if (res < 0)
+            parsed = { .error = std::string("recvmsg: ")+strerror(-res) };
+        run_cb_and_clear();
+    }
+    else
+    {
+        response += std::string(rbuf.data(), res);
+        handle_read();
+    }
+    stackout();
+}
+
 bool http_co_t::handle_read()
 {
     stackin();
@@ -376,6 +492,7 @@ bool http_co_t::handle_read()
         {
             if (timeout_id >= 0)
             {
+                // Timeout is cleared when headers are received
                 tfd->clear_timer(timeout_id);
                 timeout_id = -1;
             }
@@ -403,20 +520,29 @@ bool http_co_t::handle_read()
                 if (!target_response_size)
                 {
                     // Sorry, unsupported response
+                    close_connection();
+                    parsed = { .error = "Response has neither Connection: close, nor Transfer-Encoding: chunked nor Content-Length headers" };
+                    run_cb_and_clear();
                     stackout();
-                    end();
                     return false;
                 }
             }
+            else
+            {
+                keepalive = false;
+            }
         }
     }
     if (state == HTTP_CO_HEADERS_RECEIVED && target_response_size > 0 && response.size() >= target_response_size)
     {
-        stackout();
-        end();
-        return false;
+        std::swap(parsed.body, response);
+        if (!keepalive)
+            close_connection();
+        else
+            state = HTTP_CO_KEEPALIVE;
+        run_cb_and_clear();
     }
-    if (state == HTTP_CO_CHUNKED && response.size() > 0)
+    else if (state == HTTP_CO_CHUNKED && response.size() > 0)
     {
         int prev = 0, pos = 0;
         while ((pos = response.find("\r\n", prev)) >= prev)
@@ -439,31 +565,27 @@ bool http_co_t::handle_read()
         {
             response = response.substr(prev);
         }
-        if (parsed.eof)
+        if (want_streaming)
         {
-            stackout();
-            end();
-            return false;
-        }
-        if (want_streaming && parsed.body.size() > 0)
-        {
-            if (!ended)
-            {
-                // Don't deliver additional events after close()
-                callback(&parsed);
-            }
+            // Streaming response
+            response_callback(&parsed);
             parsed.body = "";
         }
+        else if (parsed.eof)
+        {
+            // Normal response
+            if (!keepalive)
+                close_connection();
+            else
+                state = HTTP_CO_KEEPALIVE;
+            run_cb_and_clear();
+        }
     }
-    if (state == HTTP_CO_WEBSOCKET && response.size() > 0)
+    else if (state == HTTP_CO_WEBSOCKET && response.size() > 0)
     {
         while (ws_parse_frame(response, parsed.ws_msg_type, parsed.body))
         {
-            if (!ended)
-            {
-                // Don't deliver additional events after close()
-                callback(&parsed);
-            }
+            response_callback(&parsed);
             parsed.body = "";
         }
     }
@@ -471,21 +593,14 @@ bool http_co_t::handle_read()
     return true;
 }
 
-void http_co_t::post_message(int type, const std::string & msg)
+void http_co_t::next_request()
 {
-    stackin();
-    if (state == HTTP_CO_WEBSOCKET)
+    if (keepalive_queue.size() > 0)
     {
-        request += ws_format_frame(type, msg.size());
-        request += msg;
-        submit_send();
+        auto next = keepalive_queue[0];
+        keepalive_queue.erase(keepalive_queue.begin(), keepalive_queue.begin()+1);
+        next();
     }
-    else
-    {
-        ws_outbox += ws_format_frame(type, msg.size());
-        ws_outbox += msg;
-    }
-    stackout();
 }
 
 uint64_t stoull_full(const std::string & str, int base)
@@ -503,7 +618,7 @@ uint64_t stoull_full(const std::string & str, int base)
     return r;
 }
 
-void parse_http_headers(std::string & res, http_response_t *parsed)
+static void parse_http_headers(std::string & res, http_response_t *parsed)
 {
     int pos = res.find("\r\n");
     pos = pos < 0 ? res.length() : pos+2;
@@ -552,13 +667,13 @@ static std::string ws_format_frame(int type, uint64_t size)
         res[p++] = size | /*mask*/0x80;
     else if (size < 65536)
     {
-        res[p++] = 126 | /*mask*/0x80;
+        res[p++] = (char)(126 | /*mask*/0x80);
         res[p++] = (size >> 8) & 0xFF;
         res[p++] = (size >> 0) & 0xFF;
     }
     else
     {
-        res[p++] = 127 | /*mask*/0x80;
+        res[p++] = (char)(127 | /*mask*/0x80);
         res[p++] = (size >> 56) & 0xFF;
         res[p++] = (size >> 48) & 0xFF;
         res[p++] = (size >> 40) & 0xFF;
@@ -625,136 +740,6 @@ static bool ws_parse_frame(std::string & buf, int & type, std::string & res)
     return true;
 }
 
-static bool cidr_match(const in_addr &addr, const in_addr &net, uint8_t bits)
-{
-    if (bits == 0)
-    {
-        // C99 6.5.7 (3): u32 << 32 is undefined behaviour
-        return true;
-    }
-    return !((addr.s_addr ^ net.s_addr) & htonl(0xFFFFFFFFu << (32 - bits)));
-}
-
-static bool cidr6_match(const in6_addr &address, const in6_addr &network, uint8_t bits)
-{
-    const uint32_t *a = address.s6_addr32;
-    const uint32_t *n = network.s6_addr32;
-    int bits_whole, bits_incomplete;
-    bits_whole = bits >> 5;         // number of whole u32
-    bits_incomplete = bits & 0x1F;  // number of bits in incomplete u32
-    if (bits_whole && memcmp(a, n, bits_whole << 2))
-        return false;
-    if (bits_incomplete)
-    {
-        uint32_t mask = htonl((0xFFFFFFFFu) << (32 - bits_incomplete));
-        if ((a[bits_whole] ^ n[bits_whole]) & mask)
-            return false;
-    }
-    return true;
-}
-
-struct addr_mask_t
-{
-    sa_family_t family;
-    in_addr ipv4;
-    in6_addr ipv6;
-    uint8_t bits;
-};
-
-std::vector<std::string> getifaddr_list(json11::Json mask_cfg, bool include_v6)
-{
-    std::vector<addr_mask_t> masks;
-    if (mask_cfg.is_string())
-    {
-        mask_cfg = json11::Json::array{ mask_cfg };
-    }
-    for (auto mask_json: mask_cfg.array_items())
-    {
-        std::string mask = mask_json.string_value();
-        unsigned bits = 0;
-        int p = mask.find('/');
-        if (p != std::string::npos)
-        {
-            char null_byte = 0;
-            if (sscanf(mask.c_str()+p+1, "%u%c", &bits, &null_byte) != 1 || bits > 128)
-            {
-                throw std::runtime_error((include_v6 ? "Invalid IPv4 address mask: " : "Invalid IP address mask: ") + mask);
-            }
-            mask = mask.substr(0, p);
-        }
-        in_addr ipv4;
-        in6_addr ipv6;
-        if (inet_pton(AF_INET, mask.c_str(), &ipv4) == 1)
-        {
-            if (bits > 32)
-            {
-                throw std::runtime_error((include_v6 ? "Invalid IPv4 address mask: " : "Invalid IP address mask: ") + mask);
-            }
-            masks.push_back((addr_mask_t){ .family = AF_INET, .ipv4 = ipv4, .bits = (uint8_t)bits });
-        }
-        else if (include_v6 && inet_pton(AF_INET6, mask.c_str(), &ipv6) == 1)
-        {
-            masks.push_back((addr_mask_t){ .family = AF_INET6, .ipv6 = ipv6, .bits = (uint8_t)bits });
-        }
-        else
-        {
-            throw std::runtime_error((include_v6 ? "Invalid IPv4 address mask: " : "Invalid IP address mask: ") + mask);
-        }
-    }
-    std::vector<std::string> addresses;
-    ifaddrs *list, *ifa;
-    if (getifaddrs(&list) == -1)
-    {
-        throw std::runtime_error(std::string("getifaddrs: ") + strerror(errno));
-    }
-    for (ifa = list; ifa != NULL; ifa = ifa->ifa_next)
-    {
-        if (!ifa->ifa_addr)
-        {
-            continue;
-        }
-        int family = ifa->ifa_addr->sa_family;
-        if ((family == AF_INET || family == AF_INET6 && include_v6) &&
-            (ifa->ifa_flags & (IFF_UP | IFF_RUNNING | IFF_LOOPBACK)) == (IFF_UP | IFF_RUNNING))
-        {
-            void *addr_ptr;
-            if (family == AF_INET)
-            {
-                addr_ptr = &((sockaddr_in *)ifa->ifa_addr)->sin_addr;
-            }
-            else
-            {
-                addr_ptr = &((sockaddr_in6 *)ifa->ifa_addr)->sin6_addr;
-            }
-            if (masks.size() > 0)
-            {
-                int i;
-                for (i = 0; i < masks.size(); i++)
-                {
-                    if (masks[i].family == family && (family == AF_INET
-                        ? cidr_match(*(in_addr*)addr_ptr, masks[i].ipv4, masks[i].bits)
-                        : cidr6_match(*(in6_addr*)addr_ptr, masks[i].ipv6, masks[i].bits)))
-                    {
-                        break;
-                    }
-                }
-                if (i >= masks.size())
-                {
-                    continue;
-                }
-            }
-            char addr[INET6_ADDRSTRLEN];
-            if (!inet_ntop(family, addr_ptr, addr, INET6_ADDRSTRLEN))
-            {
-                throw std::runtime_error(std::string("inet_ntop: ") + strerror(errno));
-            }
-            addresses.push_back(std::string(addr));
-        }
-    }
-    freeifaddrs(list);
-    return addresses;
-}
-
 std::string strtolower(const std::string & in)
 {
     std::string s = in;

src/http_client.h

@@ -21,41 +21,34 @@ struct http_options_t
 {
     int timeout;
     bool want_streaming;
+    bool keepalive;
 };
 
 struct http_response_t
 {
+    std::string error;
+
     bool eof = false;
-    int error_code = 0;
     int status_code = 0;
     std::string status_line;
     std::map<std::string, std::string> headers;
     int ws_msg_type = -1;
     std::string body;
+
+    void parse_json_response(std::string & error, json11::Json & r) const;
 };
 
+// Opened websocket or keepalive HTTP connection
 struct http_co_t;
 
-struct websocket_t
-{
-    http_co_t *co;
-    void post_message(int type, const std::string & msg);
-    void close();
-};
-
-void parse_http_headers(std::string & res, http_response_t *parsed);
-
-std::vector<std::string> getifaddr_list(json11::Json mask_cfg = json11::Json(), bool include_v6 = true);
+http_co_t* http_init(timerfd_manager_t *tfd);
+http_co_t* open_websocket(timerfd_manager_t *tfd, const std::string & host, const std::string & path,
+    int timeout, std::function<void(const http_response_t *msg)> on_message);
+void http_request(http_co_t *handler, const std::string & host, const std::string & request,
+    const http_options_t & options, std::function<void(const http_response_t *response)> response_callback);
+void http_post_message(http_co_t *handler, int type, const std::string & msg);
+void http_close(http_co_t *co);
 
+// Utils
 uint64_t stoull_full(const std::string & str, int base = 10);
-
 std::string strtolower(const std::string & in);
-
-void http_request(timerfd_manager_t *tfd, const std::string & host, const std::string & request,
-    const http_options_t & options, std::function<void(const http_response_t *response)> callback);
-
-void http_request_json(timerfd_manager_t *tfd, const std::string & host, const std::string & request,
-    int timeout, std::function<void(std::string, json11::Json r)> callback);
-
-websocket_t* open_websocket(timerfd_manager_t *tfd, const std::string & host, const std::string & path,
-    int timeout, std::function<void(const http_response_t *msg)> callback);

src/messenger.cpp

@@ -4,6 +4,7 @@
 #include <unistd.h>
 #include <fcntl.h>
 #include <sys/socket.h>
+#include <sys/stat.h>
 #include <sys/epoll.h>
 #include <netinet/tcp.h>
 #include <stdexcept>
@@ -221,13 +222,13 @@ void osd_messenger_t::try_connect_peer(uint64_t peer_osd)
 void osd_messenger_t::try_connect_peer_addr(osd_num_t peer_osd, const char *peer_host, int peer_port)
 {
     assert(peer_osd != this->osd_num);
-    struct sockaddr addr;
+    struct sockaddr_storage addr;
     if (!string_to_addr(peer_host, 0, peer_port, &addr))
     {
         on_connect_peer(peer_osd, -EINVAL);
         return;
     }
-    int peer_fd = socket(addr.sa_family, SOCK_STREAM, 0);
+    int peer_fd = socket(addr.ss_family, SOCK_STREAM, 0);
     if (peer_fd < 0)
     {
         on_connect_peer(peer_osd, -errno);
@@ -483,10 +484,10 @@ void osd_messenger_t::check_peer_config(osd_client_t *cl)
 void osd_messenger_t::accept_connections(int listen_fd)
 {
     // Accept new connections
-    sockaddr addr;
+    sockaddr_storage addr;
     socklen_t peer_addr_size = sizeof(addr);
     int peer_fd;
-    while ((peer_fd = accept(listen_fd, &addr, &peer_addr_size)) >= 0)
+    while ((peer_fd = accept(listen_fd, (sockaddr*)&addr, &peer_addr_size)) >= 0)
     {
         assert(peer_fd != 0);
         fprintf(stderr, "[OSD %lu] new client %d: connection from %s\n", this->osd_num, peer_fd,
@@ -544,7 +545,7 @@ json11::Json osd_messenger_t::read_config(const json11::Json & config)
     int done = 0;
     while (done < st.st_size)
     {
-        int r = read(fd, (void*)buf.data()+done, st.st_size-done);
+        int r = read(fd, (uint8_t*)buf.data()+done, st.st_size-done);
         if (r < 0)
         {
             fprintf(stderr, "Error reading %s: %s\n", config_path, strerror(errno));

src/messenger.h

@@ -49,7 +49,7 @@ struct osd_client_t
 {
     int refs = 0;
 
-    sockaddr peer_addr;
+    sockaddr_storage peer_addr;
     int peer_port;
     int peer_fd;
     int peer_state;

src/msgr_op.h

@@ -141,7 +141,7 @@ struct osd_op_buf_list_t
             else
             {
                 iov.iov_len -= result;
-                iov.iov_base += result;
+                iov.iov_base = (uint8_t*)iov.iov_base + result;
                 break;
             }
         }

src/msgr_rdma.cpp

@@ -58,7 +58,9 @@ msgr_rdma_context_t *msgr_rdma_context_t::create(const char *ib_devname, uint8_t
     msgr_rdma_context_t *ctx = new msgr_rdma_context_t();
     ctx->mtu = mtu;
 
-    srand48(time(NULL));
+    timespec tv;
+    clock_gettime(CLOCK_REALTIME, &tv);
+    srand48(tv.tv_sec*1000000000 + tv.tv_nsec);
     dev_list = ibv_get_device_list(NULL);
     if (!dev_list)
     {
@@ -389,7 +391,7 @@ bool osd_messenger_t::try_send_rdma(osd_client_t *cl)
         uint32_t len = (uint32_t)(op_size+iov.iov_len-rc->send_buf_pos < rc->max_msg
             ? iov.iov_len-rc->send_buf_pos : rc->max_msg-op_size);
         sge[op_sge++] = {
-            .addr = (uintptr_t)(iov.iov_base+rc->send_buf_pos),
+            .addr = (uintptr_t)((uint8_t*)iov.iov_base+rc->send_buf_pos),
             .length = len,
             .lkey = rc->ctx->mr->lkey,
         };
@@ -519,7 +521,7 @@ void osd_messenger_t::handle_rdma_events()
                     }
                     if (cl->rdma_conn->send_buf_pos > 0)
                     {
-                        cl->send_list[0].iov_base += cl->rdma_conn->send_buf_pos;
+                        cl->send_list[0].iov_base = (uint8_t*)cl->send_list[0].iov_base + cl->rdma_conn->send_buf_pos;
                         cl->send_list[0].iov_len -= cl->rdma_conn->send_buf_pos;
                         cl->rdma_conn->send_buf_pos = 0;
                     }

src/msgr_receive.cpp

@@ -67,7 +67,7 @@ bool osd_messenger_t::handle_read(int result, osd_client_t *cl)
         }
         return false;
     }
-    if (result <= 0 && result != -EAGAIN)
+    if (result <= 0 && result != -EAGAIN && result != -EINTR)
     {
         // this is a client socket, so don't panic on error. just disconnect it
         if (result != 0)
@@ -77,7 +77,7 @@ bool osd_messenger_t::handle_read(int result, osd_client_t *cl)
         stop_client(cl->peer_fd);
         return false;
     }
-    if (result == -EAGAIN || result < cl->read_iov.iov_len)
+    if (result == -EAGAIN || result == -EINTR || result < cl->read_iov.iov_len)
     {
         cl->read_ready--;
         if (cl->read_ready > 0)
@@ -142,13 +142,13 @@ bool osd_messenger_t::handle_read_buffer(osd_client_t *cl, void *curbuf, int rem
                 memcpy(cur->iov_base, curbuf, remain);
                 cl->read_remaining -= remain;
                 cur->iov_len -= remain;
-                cur->iov_base += remain;
+                cur->iov_base = (uint8_t*)cur->iov_base + remain;
                 remain = 0;
             }
             else
             {
                 memcpy(cur->iov_base, curbuf, cur->iov_len);
-                curbuf += cur->iov_len;
+                curbuf = (uint8_t*)curbuf + cur->iov_len;
                 cl->read_remaining -= cur->iov_len;
                 remain -= cur->iov_len;
                 cur->iov_len = 0;
@@ -390,7 +390,7 @@ void osd_messenger_t::handle_reply_ready(osd_op_t *op)
         (tv_end.tv_sec - op->tv_begin.tv_sec)*1000000 +
         (tv_end.tv_nsec - op->tv_begin.tv_nsec)/1000
     );
-    set_immediate.push_back([this, op]()
+    set_immediate.push_back([op]()
     {
         // Copy lambda to be unaffected by `delete op`
         std::function<void(osd_op_t*)>(op->callback)(op);

src/msgr_send.cpp

@@ -224,7 +224,7 @@ void osd_messenger_t::handle_send(int result, osd_client_t *cl)
         }
         return;
     }
-    if (result < 0 && result != -EAGAIN)
+    if (result < 0 && result != -EAGAIN && result != -EINTR)
     {
         // this is a client socket, so don't panic. just disconnect it
         fprintf(stderr, "Client %d socket write error: %d (%s). Disconnecting client\n", cl->peer_fd, -result, strerror(-result));
@@ -250,7 +250,7 @@ void osd_messenger_t::handle_send(int result, osd_client_t *cl)
             else
             {
                 iov.iov_len -= result;
-                iov.iov_base += result;
+                iov.iov_base = (uint8_t*)iov.iov_base + result;
                 break;
             }
         }

src/msgr_stop.cpp

@@ -111,6 +111,10 @@ void osd_messenger_t::stop_client(int peer_fd, bool force, bool force_delete)
         {
             delete cl->read_op;
         }
+        else
+        {
+            cancel_op(cl->read_op);
+        }
         cl->read_op = NULL;
     }
     if (cl->osd_num)

src/nbd_proxy.cpp

@@ -30,6 +30,9 @@ protected:
     std::string image_name;
     uint64_t inode = 0;
     uint64_t device_size = 0;
+    int nbd_timeout = 30;
+    int nbd_max_devices = 64;
+    int nbd_max_part = 3;
     inode_watch_t *watch = NULL;
 
     ring_loop_t *ringloop = NULL;
@@ -51,7 +54,18 @@ protected:
     msghdr read_msg = { 0 }, send_msg = { 0 };
     iovec read_iov = { 0 };
 
+    std::string logfile = "/dev/null";
+
 public:
+    ~nbd_proxy()
+    {
+        if (recv_buf)
+        {
+            free(recv_buf);
+            recv_buf = NULL;
+        }
+    }
+
     static json11::Json::object parse_args(int narg, const char *args[])
     {
         json11::Json::object cfg;
@@ -117,9 +131,18 @@ public:
             "Vitastor NBD proxy\n"
             "(c) Vitaliy Filippov, 2020-2021 (VNPL-1.1)\n\n"
             "USAGE:\n"
-            "  %s map [--etcd_address <etcd_address>] (--image <image> | --pool <pool> --inode <inode> --size <size in bytes>)\n"
+            "  %s map [OPTIONS] (--image <image> | --pool <pool> --inode <inode> --size <size in bytes>)\n"
             "  %s unmap /dev/nbd0\n"
-            "  %s ls [--json]\n",
+            "  %s ls [--json]\n"
+            "OPTIONS:\n"
+            "  All usual Vitastor config options like --etcd_address <etcd_address> plus NBD-specific:\n"
+            "  --nbd_timeout 30\n"
+            "    timeout in seconds after which the kernel will stop the device\n"
+            "    you can set it to 0, but beware that you won't be able to stop the device at all\n"
+            "    if vitastor-nbd process dies\n"
+            "  --nbd_max_devices 64 --nbd_max_part 3\n"
+            "    options for the \"nbd\" kernel module when modprobing it (nbds_max and max_part).\n"
+            "    note that maximum allowed (nbds_max)*(1+max_part) is 256.\n",
             exe_name, exe_name, exe_name
         );
         exit(0);
@@ -166,7 +189,7 @@ public:
             uint64_t pool = cfg["pool"].uint64_value();
             if (pool)
             {
-                inode = (inode & ((1l << (64-POOL_ID_BITS)) - 1)) | (pool << (64-POOL_ID_BITS));
+                inode = (inode & (((uint64_t)1 << (64-POOL_ID_BITS)) - 1)) | (pool << (64-POOL_ID_BITS));
             }
             if (!(inode >> (64-POOL_ID_BITS)))
             {
@@ -174,6 +197,18 @@ public:
                 exit(1);
             }
         }
+        if (cfg["nbd_max_devices"].is_number() || cfg["nbd_max_devices"].is_string())
+        {
+            nbd_max_devices = cfg["nbd_max_devices"].uint64_value();
+        }
+        if (cfg["nbd_max_part"].is_number() || cfg["nbd_max_part"].is_string())
+        {
+            nbd_max_part = cfg["nbd_max_part"].uint64_value();
+        }
+        if (cfg["nbd_timeout"].is_number() || cfg["nbd_timeout"].is_string())
+        {
+            nbd_timeout = cfg["nbd_timeout"].uint64_value();
+        }
         // Create client
         ringloop = new ring_loop_t(512);
         epmgr = new epoll_manager_t(ringloop);
@@ -190,6 +225,12 @@ public:
             }
             watch = cli->st_cli.watch_inode(image_name);
             device_size = watch->cfg.size;
+            if (!watch->cfg.num || !device_size)
+            {
+                // Image does not exist
+                fprintf(stderr, "Image %s does not exist\n", image_name.c_str());
+                exit(1);
+            }
         }
         // Initialize NBD
         int sockfd[2];
@@ -204,7 +245,7 @@ public:
         bool bg = cfg["foreground"].is_null();
         if (!cfg["dev_num"].is_null())
         {
-            if (run_nbd(sockfd, cfg["dev_num"].int64_value(), device_size, NBD_FLAG_SEND_FLUSH, 30, bg) < 0)
+            if (run_nbd(sockfd, cfg["dev_num"].int64_value(), device_size, NBD_FLAG_SEND_FLUSH, nbd_timeout, bg) < 0)
             {
                 perror("run_nbd");
                 exit(1);
@@ -239,6 +280,10 @@ public:
                 }
             }
         }
+        if (cfg["logfile"].is_string())
+        {
+            logfile = cfg["logfile"].string_value();
+        }
         if (bg)
         {
             daemonize();
@@ -278,7 +323,7 @@ public:
         stop = false;
         cluster_op_t *close_sync = new cluster_op_t;
         close_sync->opcode = OSD_OP_SYNC;
-        close_sync->callback = [this, &stop](cluster_op_t *op)
+        close_sync->callback = [&stop](cluster_op_t *op)
         {
             stop = true;
             delete op;
@@ -292,6 +337,9 @@ public:
         delete cli;
         delete epmgr;
         delete ringloop;
+        cli = NULL;
+        epmgr = NULL;
+        ringloop = NULL;
     }
 
     void load_module()
@@ -301,7 +349,10 @@ public:
             return;
         }
         int r;
-        if ((r = system("modprobe nbd")) != 0)
+        // Kernel built-in default is 16 devices with up to 16 partitions per device which is a big shit
+        // 64 also isn't too high, but the possible maximum is nbds_max=256 max_part=0 and it won't reserve
+        // any block device minor numbers for partitions
+        if ((r = system(("modprobe nbd nbds_max="+std::to_string(nbd_max_devices)+" max_part="+std::to_string(nbd_max_part)).c_str())) != 0)
         {
             if (r < 0)
                 perror("Failed to load NBD kernel module");
@@ -318,13 +369,14 @@ public:
         setsid();
         if (fork())
             exit(0);
-        chdir("/");
         close(0);
         close(1);
         close(2);
         open("/dev/null", O_RDONLY);
-        open("/dev/null", O_WRONLY);
-        open("/dev/null", O_WRONLY);
+        open(logfile.c_str(), O_WRONLY|O_APPEND|O_CREAT, 0666);
+        open(logfile.c_str(), O_WRONLY|O_APPEND|O_CREAT, 0666);
+        if (chdir("/") != 0)
+            fprintf(stderr, "Warning: Failed to chdir into /\n");
     }
 
     json11::Json::object list_mapped()
@@ -465,7 +517,7 @@ protected:
             goto end_unmap;
         }
         ioctl(nbd, NBD_SET_FLAGS, flags);
-        if (timeout >= 0)
+        if (timeout > 0)
         {
             r = ioctl(nbd, NBD_SET_TIMEOUT, (unsigned long)timeout);
             if (r < 0)
@@ -480,7 +532,11 @@ protected:
         {
             goto end_unmap;
         }
-        write(qd_fd, "32768", 5);
+        r = write(qd_fd, "32768", 5);
+        if (r != 5)
+        {
+            fprintf(stderr, "Warning: Failed to configure max_sectors_kb\n");
+        }
         close(qd_fd);
         if (!fork())
         {
@@ -553,7 +609,7 @@ protected:
             }
             else
             {
-                send_list[to_eat].iov_base += result;
+                send_list[to_eat].iov_base = (uint8_t*)send_list[to_eat].iov_base + result;
                 send_list[to_eat].iov_len -= result;
                 break;
             }
@@ -627,13 +683,14 @@ protected:
                 memcpy(cur_buf, b, inc);
                 cur_left -= inc;
                 result -= inc;
-                cur_buf += inc;
-                b += inc;
+                cur_buf = (uint8_t*)cur_buf + inc;
+                b = (uint8_t*)b + inc;
             }
             else
             {
                 assert(result <= cur_left);
                 cur_left -= result;
+                cur_buf = (uint8_t*)cur_buf + result;
                 result = 0;
             }
             if (cur_left <= 0)
@@ -648,6 +705,12 @@ protected:
         if (read_state == CL_READ_HDR)
         {
             int req_type = be32toh(cur_req.type);
+            if (be32toh(cur_req.magic) == NBD_REQUEST_MAGIC && req_type == NBD_CMD_DISC)
+            {
+                // Disconnect
+                close(nbd_fd);
+                exit(0);
+            }
             if (be32toh(cur_req.magic) != NBD_REQUEST_MAGIC ||
                 req_type != NBD_CMD_READ && req_type != NBD_CMD_WRITE && req_type != NBD_CMD_FLUSH)
             {
@@ -667,7 +730,7 @@ protected:
                 op->offset = be64toh(cur_req.from);
                 op->len = be32toh(cur_req.len);
                 buf = malloc_or_die(sizeof(nbd_reply) + op->len);
-                op->iov.push_back(buf + sizeof(nbd_reply), op->len);
+                op->iov.push_back((uint8_t*)buf + sizeof(nbd_reply), op->len);
             }
             else if (req_type == NBD_CMD_FLUSH)
             {
@@ -695,7 +758,7 @@ protected:
             if (req_type == NBD_CMD_WRITE)
             {
                 cur_op = op;
-                cur_buf = buf + sizeof(nbd_reply);
+                cur_buf = (uint8_t*)buf + sizeof(nbd_reply);
                 cur_left = op->len;
                 read_state = CL_READ_DATA;
             }
@@ -734,5 +797,6 @@ int main(int narg, const char *args[])
     exe_name = args[0];
     nbd_proxy *p = new nbd_proxy();
     p->exec(nbd_proxy::parse_args(narg, args));
+    delete p;
     return 0;
 }

src/osd.cpp

@@ -3,6 +3,7 @@
 
 #include <sys/socket.h>
 #include <sys/poll.h>
+#include <sys/mman.h>
 #include <netinet/in.h>
 #include <netinet/tcp.h>
 #include <arpa/inet.h>
@@ -53,6 +54,20 @@ osd_t::osd_t(const json11::Json & config, ring_loop_t *ringloop)
             autosync_writes = max_autosync;
     }
 
+    if (this->config["osd_memlock"] == "true" || this->config["osd_memlock"] == "1" || this->config["osd_memlock"] == "yes")
+    {
+        // Lock all OSD memory if requested
+        if (mlockall(MCL_CURRENT|MCL_FUTURE
+#ifdef MCL_ONFAULT
+            | MCL_ONFAULT
+#endif
+            ) != 0)
+        {
+            fprintf(stderr, "osd_memlock is set to true, but mlockall() failed: %s\n", strerror(errno));
+            exit(-1);
+        }
+    }
+
     this->tfd->set_timer(print_stats_interval*1000, true, [this](int timer_id)
     {
         print_stats();
@@ -185,46 +200,7 @@ void osd_t::bind_socket()
 
     // FIXME Support multiple listening sockets
 
-    sockaddr addr;
-    if (!string_to_addr(bind_address, 0, bind_port, &addr))
-    {
-        throw std::runtime_error("bind address "+bind_address+" is not valid");
-    }
-
-    listen_fd = socket(addr.sa_family, SOCK_STREAM, 0);
-    if (listen_fd < 0)
-    {
-        throw std::runtime_error(std::string("socket: ") + strerror(errno));
-    }
-    int enable = 1;
-    setsockopt(listen_fd, SOL_SOCKET, SO_REUSEADDR, &enable, sizeof(enable));
-
-    if (bind(listen_fd, &addr, sizeof(addr)) < 0)
-    {
-        close(listen_fd);
-        throw std::runtime_error(std::string("bind: ") + strerror(errno));
-    }
-    if (bind_port == 0)
-    {
-        socklen_t len = sizeof(addr);
-        if (getsockname(listen_fd, (sockaddr *)&addr, &len) == -1)
-        {
-            close(listen_fd);
-            throw std::runtime_error(std::string("getsockname: ") + strerror(errno));
-        }
-        listening_port = ntohs(((sockaddr_in*)&addr)->sin_port);
-    }
-    else
-    {
-        listening_port = bind_port;
-    }
-
-    if (listen(listen_fd, listen_backlog) < 0)
-    {
-        close(listen_fd);
-        throw std::runtime_error(std::string("listen: ") + strerror(errno));
-    }
-
+    listen_fd = create_and_bind_socket(bind_address, bind_port, listen_backlog, &listening_port);
     fcntl(listen_fd, F_SETFL, fcntl(listen_fd, F_GETFL, 0) | O_NONBLOCK);
 
     epmgr->set_fd_handler(listen_fd, false, [this](int fd, int events)
@@ -331,8 +307,8 @@ void osd_t::exec_op(osd_op_t *cur_op)
 
 void osd_t::reset_stats()
 {
-    msgr.stats = { 0 };
-    prev_stats = { 0 };
+    msgr.stats = {};
+    prev_stats = {};
     memset(recovery_stat_count, 0, sizeof(recovery_stat_count));
     memset(recovery_stat_bytes, 0, sizeof(recovery_stat_bytes));
 }
@@ -447,7 +423,7 @@ void osd_t::print_slow()
                 {
                     for (uint64_t i = 0; i < op->req.sec_stab.len; i += sizeof(obj_ver_id))
                     {
-                        obj_ver_id *ov = (obj_ver_id*)(op->buf + i);
+                        obj_ver_id *ov = (obj_ver_id*)((uint8_t*)op->buf + i);
                         bufprintf(i == 0 ? " %lx:%lx v%lu" : ", %lx:%lx v%lu", ov->oid.inode, ov->oid.stripe, ov->version);
                     }
                 }

src/osd.h

@@ -166,8 +166,8 @@ class osd_t
     osd_op_stats_t prev_stats;
     std::map<uint64_t, inode_stats_t> inode_stats;
     const char* recovery_stat_names[2] = { "degraded", "misplaced" };
-    uint64_t recovery_stat_count[2][2] = { 0 };
-    uint64_t recovery_stat_bytes[2][2] = { 0 };
+    uint64_t recovery_stat_count[2][2] = {};
+    uint64_t recovery_stat_bytes[2][2] = {};
 
     // cluster connection
     void parse_config(const json11::Json & config);
@@ -211,7 +211,7 @@ class osd_t
     // flushing, recovery and backfill
     void submit_pg_flush_ops(pg_t & pg);
     void handle_flush_op(bool rollback, pool_id_t pool_id, pg_num_t pg_num, pg_flush_batch_t *fb, osd_num_t peer_osd, int retval);
-    void submit_flush_op(pool_id_t pool_id, pg_num_t pg_num, pg_flush_batch_t *fb, bool rollback, osd_num_t peer_osd, int count, obj_ver_id *data);
+    bool submit_flush_op(pool_id_t pool_id, pg_num_t pg_num, pg_flush_batch_t *fb, bool rollback, osd_num_t peer_osd, int count, obj_ver_id *data);
     bool pick_next_recovery(osd_recovery_op_t &op);
     void submit_recovery_op(osd_recovery_op_t *op);
     bool continue_recovery();

src/osd_cluster.cpp

@@ -6,6 +6,7 @@
 #include "etcd_state_client.h"
 #include "http_client.h"
 #include "osd_rmw.h"
+#include "addr_util.h"
 
 // Startup sequence:
 //   Start etcd watcher -> Load global OSD configuration -> Bind socket -> Acquire lease -> Report&lock OSD state
@@ -188,7 +189,7 @@ void osd_t::report_statistics()
     for (auto kv: bs->get_inode_space_stats())
     {
         pool_id_t pool_id = INODE_POOL(kv.first);
-        uint64_t only_inode_num = (kv.first & ((1l << (64-POOL_ID_BITS)) - 1));
+        uint64_t only_inode_num = INODE_NO_POOL(kv.first);
         if (!last_pool || pool_id != last_pool)
         {
             if (last_pool)
@@ -206,7 +207,7 @@ void osd_t::report_statistics()
     for (auto kv: inode_stats)
     {
         pool_id_t pool_id = INODE_POOL(kv.first);
-        uint64_t only_inode_num = (kv.first & ((1l << (64-POOL_ID_BITS)) - 1));
+        uint64_t only_inode_num = (kv.first & (((uint64_t)1 << (64-POOL_ID_BITS)) - 1));
         if (!last_pool || pool_id != last_pool)
         {
             if (last_pool)
@@ -276,14 +277,14 @@ void osd_t::report_statistics()
             } }
         });
     }
-    st_cli.etcd_txn(json11::Json::object { { "success", txn } }, ETCD_SLOW_TIMEOUT, [this](std::string err, json11::Json res)
+    st_cli.etcd_txn_slow(json11::Json::object { { "success", txn } }, [this](std::string err, json11::Json res)
     {
         etcd_reporting_stats = false;
         if (err != "")
         {
             printf("[OSD %lu] Error reporting state to etcd: %s\n", this->osd_num, err.c_str());
             // Retry indefinitely
-            tfd->set_timer(ETCD_SLOW_TIMEOUT, false, [this](int timer_id)
+            tfd->set_timer(st_cli.etcd_slow_timeout, false, [this](int timer_id)
             {
                 report_statistics();
             });
@@ -354,13 +355,13 @@ void osd_t::acquire_lease()
 {
     // Maximum lease TTL is (report interval) + retries * (timeout + repeat interval)
     st_cli.etcd_call("/lease/grant", json11::Json::object {
-        { "TTL", etcd_report_interval+(MAX_ETCD_ATTEMPTS*(2*ETCD_QUICK_TIMEOUT)+999)/1000 }
-    }, ETCD_QUICK_TIMEOUT, [this](std::string err, json11::Json data)
+        { "TTL", etcd_report_interval+(st_cli.max_etcd_attempts*(2*st_cli.etcd_quick_timeout)+999)/1000 }
+    }, st_cli.etcd_quick_timeout, 0, 0, [this](std::string err, json11::Json data)
     {
         if (err != "" || data["ID"].string_value() == "")
         {
-            printf("Error acquiring a lease from etcd: %s\n", err.c_str());
-            tfd->set_timer(ETCD_QUICK_TIMEOUT, false, [this](int timer_id)
+            printf("Error acquiring a lease from etcd: %s, retrying\n", err.c_str());
+            tfd->set_timer(st_cli.etcd_quick_timeout, false, [this](int timer_id)
             {
                 acquire_lease();
             });
@@ -407,19 +408,19 @@ void osd_t::create_osd_state()
                 } }
             },
         } },
-    }, ETCD_QUICK_TIMEOUT, [this](std::string err, json11::Json data)
+    }, st_cli.etcd_quick_timeout, 0, 0, [this](std::string err, json11::Json data)
     {
         if (err != "")
         {
             etcd_failed_attempts++;
             printf("Error creating OSD state key: %s\n", err.c_str());
-            if (etcd_failed_attempts > MAX_ETCD_ATTEMPTS)
+            if (etcd_failed_attempts > st_cli.max_etcd_attempts)
             {
                 // Die
                 throw std::runtime_error("Cluster connection failed");
             }
             // Retry
-            tfd->set_timer(ETCD_QUICK_TIMEOUT, false, [this](int timer_id)
+            tfd->set_timer(st_cli.etcd_quick_timeout, false, [this](int timer_id)
             {
                 create_osd_state();
             });
@@ -451,24 +452,26 @@ void osd_t::renew_lease()
 {
     st_cli.etcd_call("/lease/keepalive", json11::Json::object {
         { "ID", etcd_lease_id }
-    }, ETCD_QUICK_TIMEOUT, [this](std::string err, json11::Json data)
+    }, st_cli.etcd_quick_timeout, 0, 0, [this](std::string err, json11::Json data)
     {
         if (err == "" && data["result"]["TTL"].string_value() == "")
         {
             // Die
-            throw std::runtime_error("etcd lease has expired");
+            fprintf(stderr, "Error refreshing etcd lease\n");
+            force_stop(1);
         }
         if (err != "")
         {
             etcd_failed_attempts++;
             printf("Error renewing etcd lease: %s\n", err.c_str());
-            if (etcd_failed_attempts > MAX_ETCD_ATTEMPTS)
+            if (etcd_failed_attempts > st_cli.max_etcd_attempts)
             {
                 // Die
-                throw std::runtime_error("Cluster connection failed");
+                fprintf(stderr, "Cluster connection failed\n");
+                force_stop(1);
             }
             // Retry
-            tfd->set_timer(ETCD_QUICK_TIMEOUT, false, [this](int timer_id)
+            tfd->set_timer(st_cli.etcd_quick_timeout, false, [this](int timer_id)
             {
                 renew_lease();
             });
@@ -487,7 +490,7 @@ void osd_t::force_stop(int exitcode)
     {
         st_cli.etcd_call("/kv/lease/revoke", json11::Json::object {
             { "ID", etcd_lease_id }
-        }, ETCD_QUICK_TIMEOUT, [this, exitcode](std::string err, json11::Json data)
+        }, st_cli.etcd_quick_timeout, st_cli.max_etcd_attempts, 0, [this, exitcode](std::string err, json11::Json data)
         {
             if (err != "")
             {
@@ -825,7 +828,7 @@ void osd_t::report_pg_states()
     etcd_reporting_pg_state = true;
     st_cli.etcd_txn(json11::Json::object {
         { "compare", checks }, { "success", success }, { "failure", failure }
-    }, ETCD_QUICK_TIMEOUT, [this, reporting_pgs](std::string err, json11::Json data)
+    }, st_cli.etcd_quick_timeout, 0, 0, [this, reporting_pgs](std::string err, json11::Json data)
     {
         etcd_reporting_pg_state = false;
         if (!data["succeeded"].bool_value())
@@ -857,10 +860,13 @@ void osd_t::report_pg_states()
                         if (null_byte == 0)
                         {
                             auto pg_it = pgs.find({ .pool_id = pool_id, .pg_num = pg_num });
-                            if (pg_it != pgs.end() && pg_it->second.state != PG_OFFLINE && pg_it->second.state != PG_STARTING)
+                            if (pg_it != pgs.end() && pg_it->second.state != PG_OFFLINE && pg_it->second.state != PG_STARTING &&
+                                kv.value["primary"].uint64_value() != 0 &&
+                                kv.value["primary"].uint64_value() != this->osd_num)
                             {
-                                // Live PG state update failed
-                                printf("Failed to report state of pool %u PG %u which is live. Race condition detected, exiting\n", pool_id, pg_num);
+                                // PG is somehow captured by another OSD
+                                printf("BUG: OSD %lu captured our PG %u/%u. Race condition detected, exiting\n",
+                                    kv.value["primary"].uint64_value(), pool_id, pg_num);
                                 force_stop(1);
                                 return;
                             }

src/osd_flush.cpp

@@ -47,7 +47,8 @@ void osd_t::submit_pg_flush_ops(pg_t & pg)
         if (l.second.size() > 0)
         {
             fb->flush_ops++;
-            submit_flush_op(pg.pool_id, pg.pg_num, fb, true, l.first, l.second.size(), l.second.data());
+            if (!submit_flush_op(pg.pool_id, pg.pg_num, fb, true, l.first, l.second.size(), l.second.data()))
+                return;
         }
     }
     for (auto & l: fb->stable_lists)
@@ -55,7 +56,8 @@ void osd_t::submit_pg_flush_ops(pg_t & pg)
         if (l.second.size() > 0)
         {
             fb->flush_ops++;
-            submit_flush_op(pg.pool_id, pg.pg_num, fb, false, l.first, l.second.size(), l.second.data());
+            if (!submit_flush_op(pg.pool_id, pg.pg_num, fb, false, l.first, l.second.size(), l.second.data()))
+                return;
         }
     }
 }
@@ -160,7 +162,7 @@ void osd_t::handle_flush_op(bool rollback, pool_id_t pool_id, pg_num_t pg_num, p
     }
 }
 
-void osd_t::submit_flush_op(pool_id_t pool_id, pg_num_t pg_num, pg_flush_batch_t *fb, bool rollback, osd_num_t peer_osd, int count, obj_ver_id *data)
+bool osd_t::submit_flush_op(pool_id_t pool_id, pg_num_t pg_num, pg_flush_batch_t *fb, bool rollback, osd_num_t peer_osd, int count, obj_ver_id *data)
 {
     osd_op_t *op = new osd_op_t();
     // Copy buffer so it gets freed along with the operation
@@ -188,10 +190,8 @@ void osd_t::submit_flush_op(pool_id_t pool_id, pg_num_t pg_num, pg_flush_batch_t
     else
     {
         // Peer
-        int peer_fd = msgr.osd_peer_fds[peer_osd];
         op->op_type = OSD_OP_OUT;
         op->iov.push_back(op->buf, count * sizeof(obj_ver_id));
-        op->peer_fd = peer_fd;
         op->req = (osd_any_op_t){
             .sec_stab = {
                 .header = {
@@ -207,8 +207,21 @@ void osd_t::submit_flush_op(pool_id_t pool_id, pg_num_t pg_num, pg_flush_batch_t
             handle_flush_op(op->req.hdr.opcode == OSD_OP_SEC_ROLLBACK, pool_id, pg_num, fb, peer_osd, op->reply.hdr.retval);
             delete op;
         };
-        msgr.outbox_push(op);
+        auto peer_fd_it = msgr.osd_peer_fds.find(peer_osd);
+        if (peer_fd_it != msgr.osd_peer_fds.end())
+        {
+            op->peer_fd = peer_fd_it->second;
+            msgr.outbox_push(op);
+        }
+        else
+        {
+            // Fail it immediately
+            op->reply.hdr.retval = -EPIPE;
+            op->callback(op);
+            return false;
+        }
     }
+    return true;
 }
 
 bool osd_t::pick_next_recovery(osd_recovery_op_t &op)

src/osd_id.h

@@ -9,7 +9,7 @@
 #define POOL_ID_MAX 0x10000
 #define POOL_ID_BITS 16
 #define INODE_POOL(inode) (pool_id_t)((inode) >> (64 - POOL_ID_BITS))
-#define INODE_NO_POOL(inode) (inode_t)(inode & ((1l << (64-POOL_ID_BITS)) - 1))
+#define INODE_NO_POOL(inode) (inode_t)(inode & (((uint64_t)1 << (64-POOL_ID_BITS)) - 1))
 #define INODE_WITH_POOL(pool_id, inode) (((inode_t)(pool_id) << (64-POOL_ID_BITS)) | INODE_NO_POOL(inode))
 
 // Pool ID is 16 bits long

src/osd_peering.cpp

@@ -27,10 +27,12 @@ void osd_t::handle_peers()
                     misplaced_objects += p.second.misplaced_objects.size();
                     // FIXME: degraded objects may currently include misplaced, too! Report them separately?
                     degraded_objects += p.second.degraded_objects.size();
-                    if ((p.second.state & (PG_ACTIVE | PG_HAS_UNCLEAN)) == (PG_ACTIVE | PG_HAS_UNCLEAN))
+                    if (p.second.state & PG_HAS_UNCLEAN)
                         peering_state = peering_state | OSD_FLUSHING_PGS;
-                    else if (p.second.state & PG_ACTIVE)
+                    else if (p.second.state & (PG_HAS_DEGRADED | PG_HAS_MISPLACED))
                         peering_state = peering_state | OSD_RECOVERING;
+                    ringloop->wakeup();
+                    return;
                 }
                 else
                 {
@@ -176,6 +178,17 @@ void osd_t::start_pg_peering(pg_t & pg)
             msgr.stop_client(peer_fd);
         }
     }
+    // Try to connect with current peers if they're up, but we don't have connections to them
+    // Otherwise we may erroneously decide that the pg is incomplete :-)
+    for (auto pg_osd: pg.all_peers)
+    {
+        if (pg_osd != this->osd_num &&
+            msgr.osd_peer_fds.find(pg_osd) == msgr.osd_peer_fds.end() &&
+            msgr.wanted_peers.find(pg_osd) == msgr.wanted_peers.end())
+        {
+            msgr.connect_peer(pg_osd, st_cli.peer_states[pg_osd]);
+        }
+    }
     // Calculate current write OSD set
     pg.pg_cursize = 0;
     pg.cur_set.resize(pg.target_set.size());
@@ -207,10 +220,6 @@ void osd_t::start_pg_peering(pg_t & pg)
         {
             cur_peers.insert(pg_osd);
         }
-        else if (msgr.wanted_peers.find(pg_osd) == msgr.wanted_peers.end())
-        {
-            msgr.connect_peer(pg_osd, st_cli.peer_states[pg_osd]);
-        }
     }
     if (pg.target_history.size())
     {
@@ -333,7 +342,7 @@ void osd_t::submit_sync_and_list_subop(osd_num_t role_osd, pg_peering_state_t *p
     else
     {
         // Peer
-        auto & cl = msgr.clients.at(msgr.osd_peer_fds[role_osd]);
+        auto & cl = msgr.clients.at(msgr.osd_peer_fds.at(role_osd));
         osd_op_t *op = new osd_op_t();
         op->op_type = OSD_OP_OUT;
         op->peer_fd = cl->peer_fd;
@@ -387,7 +396,9 @@ void osd_t::submit_list_subop(osd_num_t role_osd, pg_peering_state_t *ps)
         {
             if (op->bs_op->retval < 0)
             {
-                throw std::runtime_error("local OP_LIST failed");
+                printf("Local OP_LIST failed: retval=%d\n", op->bs_op->retval);
+                force_stop(1);
+                return;
             }
             add_bs_subop_stats(op);
             printf(
@@ -412,7 +423,7 @@ void osd_t::submit_list_subop(osd_num_t role_osd, pg_peering_state_t *ps)
         // Peer
         osd_op_t *op = new osd_op_t();
         op->op_type = OSD_OP_OUT;
-        op->peer_fd = msgr.osd_peer_fds[role_osd];
+        op->peer_fd = msgr.osd_peer_fds.at(role_osd);
         op->req = (osd_any_op_t){
             .sec_list = {
                 .header = {

src/osd_peering_pg.cpp

@@ -437,7 +437,7 @@ void pg_t::calc_object_states(int log_level)
     st.walk();
     if (this->state & (PG_DEGRADED|PG_LEFT_ON_DEAD))
     {
-        assert(epoch != ((1ul << PG_EPOCH_BITS)-1));
+        assert(epoch != (((uint64_t)1 << PG_EPOCH_BITS)-1));
         epoch++;
     }
 }

src/osd_primary.cpp

@@ -96,11 +96,11 @@ bool osd_t::prepare_primary_rw(osd_op_t *cur_op)
             (pool_cfg.scheme == POOL_SCHEME_REPLICATED ? 0 : pg_it->second.pg_size)
         )
     );
-    void *data_buf = ((void*)op_data) + sizeof(osd_primary_op_data_t);
+    void *data_buf = (uint8_t*)op_data + sizeof(osd_primary_op_data_t);
     op_data->pg_num = pg_num;
     op_data->oid = oid;
     op_data->stripes = (osd_rmw_stripe_t*)data_buf;
-    data_buf += sizeof(osd_rmw_stripe_t) * stripe_count;
+    data_buf = (uint8_t*)data_buf + sizeof(osd_rmw_stripe_t) * stripe_count;
     op_data->scheme = pool_cfg.scheme;
     op_data->pg_data_size = pg_data_size;
     op_data->pg_size = pg_it->second.pg_size;
@@ -110,17 +110,17 @@ bool osd_t::prepare_primary_rw(osd_op_t *cur_op)
     for (int i = 0; i < stripe_count; i++)
     {
         op_data->stripes[i].bmp_buf = data_buf;
-        data_buf += clean_entry_bitmap_size;
+        data_buf = (uint8_t*)data_buf + clean_entry_bitmap_size;
     }
     op_data->chain_size = chain_size;
     if (chain_size > 0)
     {
         op_data->read_chain = (inode_t*)data_buf;
-        data_buf += sizeof(inode_t) * chain_size;
+        data_buf = (uint8_t*)data_buf + sizeof(inode_t) * chain_size;
         op_data->snapshot_bitmaps = data_buf;
-        data_buf += chain_size * stripe_count * clean_entry_bitmap_size;
+        data_buf = (uint8_t*)data_buf + chain_size * stripe_count * clean_entry_bitmap_size;
         op_data->missing_flags = (uint8_t*)data_buf;
-        data_buf += chain_size * (pool_cfg.scheme == POOL_SCHEME_REPLICATED ? 0 : pg_it->second.pg_size);
+        data_buf = (uint8_t*)data_buf + chain_size * (pool_cfg.scheme == POOL_SCHEME_REPLICATED ? 0 : pg_it->second.pg_size);
         // Copy chain
         int chain_num = 0;
         op_data->read_chain[chain_num++] = cur_op->req.rw.inode;
@@ -194,18 +194,22 @@ void osd_t::continue_primary_read(osd_op_t *cur_op)
         // Determine version
         auto vo_it = pg.ver_override.find(op_data->oid);
         op_data->target_ver = vo_it != pg.ver_override.end() ? vo_it->second : UINT64_MAX;
+        op_data->prev_set = pg.cur_set.data();
+        if (pg.state != PG_ACTIVE)
+        {
+            // PG may be degraded or have misplaced objects
+            op_data->prev_set = get_object_osd_set(pg, op_data->oid, pg.cur_set.data(), &op_data->object_state);
+        }
         if (pg.state == PG_ACTIVE || op_data->scheme == POOL_SCHEME_REPLICATED)
         {
             // Fast happy-path
             cur_op->buf = alloc_read_buffer(op_data->stripes, op_data->pg_data_size, 0);
-            submit_primary_subops(SUBMIT_RMW_READ, op_data->target_ver, pg.cur_set.data(), cur_op);
+            submit_primary_subops(SUBMIT_RMW_READ, op_data->target_ver, op_data->prev_set, cur_op);
             op_data->st = 1;
         }
         else
         {
-            // PG may be degraded or have misplaced objects
-            uint64_t* cur_set = get_object_osd_set(pg, op_data->oid, pg.cur_set.data(), &op_data->object_state);
-            if (extend_missing_stripes(op_data->stripes, cur_set, op_data->pg_data_size, pg.pg_size) < 0)
+            if (extend_missing_stripes(op_data->stripes, op_data->prev_set, op_data->pg_data_size, pg.pg_size) < 0)
             {
                 finish_op(cur_op, -EIO);
                 return;
@@ -215,7 +219,7 @@ void osd_t::continue_primary_read(osd_op_t *cur_op)
             op_data->scheme = pg.scheme;
             op_data->degraded = 1;
             cur_op->buf = alloc_read_buffer(op_data->stripes, pg.pg_size, 0);
-            submit_primary_subops(SUBMIT_RMW_READ, op_data->target_ver, cur_set, cur_op);
+            submit_primary_subops(SUBMIT_RMW_READ, op_data->target_ver, op_data->prev_set, cur_op);
             op_data->st = 1;
         }
     }
@@ -248,7 +252,7 @@ resume_2:
             {
                 // Send buffer in parts to avoid copying
                 cur_op->iov.push_back(
-                    stripes[role].read_buf + (stripes[role].req_start - stripes[role].read_start),
+                    (uint8_t*)stripes[role].read_buf + (stripes[role].req_start - stripes[role].read_start),
                     stripes[role].req_end - stripes[role].req_start
                 );
             }

src/osd_primary_chain.cpp

@@ -66,7 +66,7 @@ int osd_t::read_bitmaps(osd_op_t *cur_op, pg_t & pg, int base_state)
             auto read_version = (vo_it != pg.ver_override.end() ? vo_it->second : UINT64_MAX);
             // Read bitmap synchronously from the local database
             bs->read_bitmap(
-                cur_oid, read_version, op_data->snapshot_bitmaps + chain_num*clean_entry_bitmap_size,
+                cur_oid, read_version, (uint8_t*)op_data->snapshot_bitmaps + chain_num*clean_entry_bitmap_size,
                 !chain_num ? &cur_op->reply.rw.version : NULL
             );
         }
@@ -96,12 +96,15 @@ resume_1:
                 {
                     if (op_data->missing_flags[chain_num*pg.pg_size + i])
                     {
-                        osd_rmw_stripe_t local_stripes[pg.pg_size] = { 0 };
+                        osd_rmw_stripe_t local_stripes[pg.pg_size];
                         for (i = 0; i < pg.pg_size; i++)
                         {
-                            local_stripes[i].missing = op_data->missing_flags[chain_num*pg.pg_size + i] && true;
-                            local_stripes[i].bmp_buf = op_data->snapshot_bitmaps + (chain_num*pg.pg_size + i)*clean_entry_bitmap_size;
-                            local_stripes[i].read_start = local_stripes[i].read_end = 1;
+                            local_stripes[i] = (osd_rmw_stripe_t){
+                                .bmp_buf = (uint8_t*)op_data->snapshot_bitmaps + (chain_num*pg.pg_size + i)*clean_entry_bitmap_size,
+                                .read_start = 1,
+                                .read_end = 1,
+                                .missing = op_data->missing_flags[chain_num*pg.pg_size + i] && true,
+                            };
                         }
                         if (pg.scheme == POOL_SCHEME_XOR)
                         {
@@ -146,7 +149,7 @@ int osd_t::collect_bitmap_requests(osd_op_t *cur_op, pg_t & pg, std::vector<bitm
                 .osd_num = read_target,
                 .oid = cur_oid,
                 .version = target_version,
-                .bmp_buf = op_data->snapshot_bitmaps + chain_num*clean_entry_bitmap_size,
+                .bmp_buf = (uint8_t*)op_data->snapshot_bitmaps + chain_num*clean_entry_bitmap_size,
             });
         }
         else
@@ -185,7 +188,7 @@ int osd_t::collect_bitmap_requests(osd_op_t *cur_op, pg_t & pg, std::vector<bitm
                             .stripe = cur_oid.stripe | i,
                         },
                         .version = target_version,
-                        .bmp_buf = op_data->snapshot_bitmaps + (chain_num*pg.pg_size + i)*clean_entry_bitmap_size,
+                        .bmp_buf = (uint8_t*)op_data->snapshot_bitmaps + (chain_num*pg.pg_size + i)*clean_entry_bitmap_size,
                     });
                     found++;
                 }
@@ -204,6 +207,7 @@ int osd_t::submit_bitmap_subops(osd_op_t *cur_op, pg_t & pg)
     std::vector<bitmap_request_t> *bitmap_requests = new std::vector<bitmap_request_t>();
     if (collect_bitmap_requests(cur_op, pg, *bitmap_requests) < 0)
     {
+        delete bitmap_requests;
         return -1;
     }
     op_data->n_subops = 0;
@@ -242,7 +246,6 @@ int osd_t::submit_bitmap_subops(osd_op_t *cur_op, pg_t & pg)
                 // Send to a remote OSD
                 osd_op_t *subop = op_data->subops+subop_idx;
                 subop->op_type = OSD_OP_OUT;
-                subop->peer_fd = msgr.osd_peer_fds.at(subop_osd_num);
                 // FIXME: Use the pre-allocated buffer
                 subop->buf = malloc_or_die(sizeof(obj_ver_id)*(i+1-prev));
                 subop->req = (osd_any_op_t){
@@ -266,15 +269,15 @@ int osd_t::submit_bitmap_subops(osd_op_t *cur_op, pg_t & pg)
                     int requested_count = subop->req.sec_read_bmp.len / sizeof(obj_ver_id);
                     if (subop->reply.hdr.retval == requested_count * (8 + clean_entry_bitmap_size))
                     {
-                        void *cur_buf = subop->buf + 8;
+                        void *cur_buf = (uint8_t*)subop->buf + 8;
                         for (int j = prev; j <= i; j++)
                         {
                             memcpy((*bitmap_requests)[j].bmp_buf, cur_buf, clean_entry_bitmap_size);
                             if ((*bitmap_requests)[j].oid.inode == cur_op->req.rw.inode)
                             {
-                                memcpy(&cur_op->reply.rw.version, cur_buf-8, 8);
+                                memcpy(&cur_op->reply.rw.version, (uint8_t*)cur_buf-8, 8);
                             }
-                            cur_buf += 8 + clean_entry_bitmap_size;
+                            cur_buf = (uint8_t*)cur_buf + 8 + clean_entry_bitmap_size;
                         }
                     }
                     if ((cur_op->op_data->errors + cur_op->op_data->done + 1) >= cur_op->op_data->n_subops)
@@ -283,7 +286,18 @@ int osd_t::submit_bitmap_subops(osd_op_t *cur_op, pg_t & pg)
                     }
                     handle_primary_subop(subop, cur_op);
                 };
-                msgr.outbox_push(subop);
+                auto peer_fd_it = msgr.osd_peer_fds.find(subop_osd_num);
+                if (peer_fd_it != msgr.osd_peer_fds.end())
+                {
+                    subop->peer_fd = peer_fd_it->second;
+                    msgr.outbox_push(subop);
+                }
+                else
+                {
+                    // Fail it immediately
+                    subop->reply.hdr.retval = -EPIPE;
+                    subop->callback(subop);
+                }
                 subop_idx++;
             }
             prev = i+1;
@@ -363,7 +377,7 @@ int osd_t::submit_chained_read_requests(pg_t & pg, osd_op_t *cur_op)
         + sizeof(osd_rmw_stripe_t) * stripe_count * op_data->chain_size
     );
     osd_rmw_stripe_t *chain_stripes = (osd_rmw_stripe_t*)(
-        ((void*)op_data->chain_reads) + sizeof(osd_chain_read_t) * op_data->chain_read_count
+        (uint8_t*)op_data->chain_reads + sizeof(osd_chain_read_t) * op_data->chain_read_count
     );
     // Now process each subrequest as a separate read, including reconstruction if needed
     // Prepare reads
@@ -386,18 +400,21 @@ int osd_t::submit_chained_read_requests(pg_t & pg, osd_op_t *cur_op)
             stripes[role].read_end = stripes[role].req_end;
         }
         uint64_t *cur_set = pg.cur_set.data();
-        if (pg.state != PG_ACTIVE && op_data->scheme != POOL_SCHEME_REPLICATED)
+        if (pg.state != PG_ACTIVE)
         {
             pg_osd_set_state_t *object_state;
             cur_set = get_object_osd_set(pg, cur_oid, pg.cur_set.data(), &object_state);
-            if (extend_missing_stripes(stripes, cur_set, pg.pg_data_size, pg.pg_size) < 0)
+            if (op_data->scheme != POOL_SCHEME_REPLICATED)
             {
-                free(op_data->chain_reads);
-                op_data->chain_reads = NULL;
-                finish_op(cur_op, -EIO);
-                return -1;
+                if (extend_missing_stripes(stripes, cur_set, pg.pg_data_size, pg.pg_size) < 0)
+                {
+                    free(op_data->chain_reads);
+                    op_data->chain_reads = NULL;
+                    finish_op(cur_op, -EIO);
+                    return -1;
+                }
+                op_data->degraded = 1;
             }
-            op_data->degraded = 1;
         }
         if (op_data->scheme == POOL_SCHEME_REPLICATED)
         {
@@ -425,8 +442,8 @@ int osd_t::submit_chained_read_requests(pg_t & pg, osd_op_t *cur_op)
             if (stripes[role].read_end > 0)
             {
                 stripes[role].read_buf = cur_buf;
-                stripes[role].bmp_buf = op_data->snapshot_bitmaps + (chain_reads[cri].chain_pos*stripe_count + role)*clean_entry_bitmap_size;
-                cur_buf += stripes[role].read_end - stripes[role].read_start;
+                stripes[role].bmp_buf = (uint8_t*)op_data->snapshot_bitmaps + (chain_reads[cri].chain_pos*stripe_count + role)*clean_entry_bitmap_size;
+                cur_buf = (uint8_t*)cur_buf + stripes[role].read_end - stripes[role].read_start;
             }
         }
     }
@@ -451,7 +468,7 @@ int osd_t::submit_chained_read_requests(pg_t & pg, osd_op_t *cur_op)
         auto vo_it = pg.ver_override.find(cur_oid);
         uint64_t target_ver = vo_it != pg.ver_override.end() ? vo_it->second : UINT64_MAX;
         uint64_t *cur_set = pg.cur_set.data();
-        if (pg.state != PG_ACTIVE && op_data->scheme != POOL_SCHEME_REPLICATED)
+        if (pg.state != PG_ACTIVE)
         {
             pg_osd_set_state_t *object_state;
             cur_set = get_object_osd_set(pg, cur_oid, pg.cur_set.data(), &object_state);
@@ -474,7 +491,7 @@ void osd_t::send_chained_read_results(pg_t & pg, osd_op_t *cur_op)
     osd_primary_op_data_t *op_data = cur_op->op_data;
     int stripe_count = (pg.scheme == POOL_SCHEME_REPLICATED ? 1 : pg.pg_size);
     osd_rmw_stripe_t *chain_stripes = (osd_rmw_stripe_t*)(
-        ((void*)op_data->chain_reads) + sizeof(osd_chain_read_t) * op_data->chain_read_count
+        (uint8_t*)op_data->chain_reads + sizeof(osd_chain_read_t) * op_data->chain_read_count
     );
     // Reconstruct parts if needed
     if (op_data->degraded)
@@ -544,7 +561,7 @@ void osd_t::send_chained_read_results(pg_t & pg, osd_op_t *cur_op)
                             role_end = bs_block_size;
                         assert(stripes[role].read_buf);
                         cur_op->iov.push_back(
-                            stripes[role].read_buf + (role_start - stripes[role].read_start),
+                            (uint8_t*)stripes[role].read_buf + (role_start - stripes[role].read_start),
                             role_end - role_start
                         );
                         sent += role_end - role_start;

src/osd_primary_subops.cpp

@@ -182,7 +182,6 @@ int osd_t::submit_primary_subop_batch(int submit_type, inode_t inode, uint64_t o
             else
             {
                 subop->op_type = OSD_OP_OUT;
-                subop->peer_fd = msgr.osd_peer_fds.at(role_osd_num);
                 subop->bitmap = stripes[stripe_num].bmp_buf;
                 subop->bitmap_len = clean_entry_bitmap_size;
                 subop->req.sec_rw = {
@@ -225,7 +224,18 @@ int osd_t::submit_primary_subop_batch(int submit_type, inode_t inode, uint64_t o
                 {
                     handle_primary_subop(subop, cur_op);
                 };
-                msgr.outbox_push(subop);
+                auto peer_fd_it = msgr.osd_peer_fds.find(role_osd_num);
+                if (peer_fd_it != msgr.osd_peer_fds.end())
+                {
+                    subop->peer_fd = peer_fd_it->second;
+                    msgr.outbox_push(subop);
+                }
+                else
+                {
+                    // Fail it immediately
+                    subop->reply.hdr.retval = -EPIPE;
+                    subop->callback(subop);
+                }
             }
             i++;
         }
@@ -463,7 +473,6 @@ void osd_t::submit_primary_del_batch(osd_op_t *cur_op, obj_ver_osd_t *chunks_to_
         else
         {
             subops[i].op_type = OSD_OP_OUT;
-            subops[i].peer_fd = msgr.osd_peer_fds.at(chunk.osd_num);
             subops[i].req = (osd_any_op_t){ .sec_del = {
                 .header = {
                     .magic = SECONDARY_OSD_OP_MAGIC,
@@ -477,7 +486,18 @@ void osd_t::submit_primary_del_batch(osd_op_t *cur_op, obj_ver_osd_t *chunks_to_
             {
                 handle_primary_subop(subop, cur_op);
             };
-            msgr.outbox_push(&subops[i]);
+            auto peer_fd_it = msgr.osd_peer_fds.find(chunk.osd_num);
+            if (peer_fd_it != msgr.osd_peer_fds.end())
+            {
+                subops[i].peer_fd = peer_fd_it->second;
+                msgr.outbox_push(&subops[i]);
+            }
+            else
+            {
+                // Fail it immediately
+                subops[i].reply.hdr.retval = -EPIPE;
+                subops[i].callback(&subops[i]);
+            }
         }
     }
 }
@@ -567,7 +587,6 @@ void osd_t::submit_primary_stab_subops(osd_op_t *cur_op)
         else
         {
             subops[i].op_type = OSD_OP_OUT;
-            subops[i].peer_fd = msgr.osd_peer_fds.at(stab_osd.osd_num);
             subops[i].req = (osd_any_op_t){ .sec_stab = {
                 .header = {
                     .magic = SECONDARY_OSD_OP_MAGIC,
@@ -581,7 +600,18 @@ void osd_t::submit_primary_stab_subops(osd_op_t *cur_op)
             {
                 handle_primary_subop(subop, cur_op);
             };
-            msgr.outbox_push(&subops[i]);
+            auto peer_fd_it = msgr.osd_peer_fds.find(stab_osd.osd_num);
+            if (peer_fd_it != msgr.osd_peer_fds.end())
+            {
+                subops[i].peer_fd = peer_fd_it->second;
+                msgr.outbox_push(&subops[i]);
+            }
+            else
+            {
+                // Fail it immediately
+                subops[i].reply.hdr.retval = -EPIPE;
+                subops[i].callback(&subops[i]);
+            }
         }
     }
 }

src/osd_primary_sync.cpp

@@ -86,7 +86,7 @@ resume_2:
             sizeof(obj_ver_osd_t)*this->copies_to_delete_after_sync_count
         );
         op_data->dirty_pgs = (pool_pg_num_t*)dirty_buf;
-        op_data->dirty_osds = (osd_num_t*)(dirty_buf + sizeof(pool_pg_num_t)*dirty_pgs.size());
+        op_data->dirty_osds = (osd_num_t*)((uint8_t*)dirty_buf + sizeof(pool_pg_num_t)*dirty_pgs.size());
         op_data->dirty_pg_count = dirty_pgs.size();
         op_data->dirty_osd_count = dirty_osds.size();
         if (this->copies_to_delete_after_sync_count)

src/osd_primary_write.cpp

@@ -113,7 +113,7 @@ resume_3:
             op_data->stripes[0].write_end != bs_block_size))
         {
             memcpy(
-                op_data->stripes[0].read_buf + op_data->stripes[0].req_start,
+                (uint8_t*)op_data->stripes[0].read_buf + op_data->stripes[0].req_start,
                 op_data->stripes[0].write_buf,
                 op_data->stripes[0].req_end - op_data->stripes[0].req_start
             );
@@ -144,9 +144,9 @@ resume_3:
     }
     else
     {
-        if ((op_data->fact_ver & (1ul<<(64-PG_EPOCH_BITS) - 1)) == (1ul<<(64-PG_EPOCH_BITS) - 1))
+        if ((op_data->fact_ver & ((uint64_t)1 << (64-PG_EPOCH_BITS) - 1)) == ((uint64_t)1 << (64-PG_EPOCH_BITS) - 1))
         {
-            assert(pg.epoch != ((1ul << PG_EPOCH_BITS)-1));
+            assert(pg.epoch != (((uint64_t)1 << PG_EPOCH_BITS)-1));
             pg.epoch++;
         }
         op_data->target_ver = op_data->fact_ver + 1;

src/osd_rmw.cpp

@@ -103,8 +103,8 @@ void reconstruct_stripes_xor(osd_rmw_stripe_t *stripes, int pg_size, uint32_t bi
                         assert(stripes[role].read_start >= stripes[prev].read_start &&
                             stripes[role].read_start >= stripes[other].read_start);
                         memxor(
-                            stripes[prev].read_buf + (stripes[role].read_start - stripes[prev].read_start),
-                            stripes[other].read_buf + (stripes[role].read_start - stripes[other].read_start),
+                            (uint8_t*)stripes[prev].read_buf + (stripes[role].read_start - stripes[prev].read_start),
+                            (uint8_t*)stripes[other].read_buf + (stripes[role].read_start - stripes[other].read_start),
                             stripes[role].read_buf, stripes[role].read_end - stripes[role].read_start
                         );
                         memxor(stripes[prev].bmp_buf, stripes[other].bmp_buf, stripes[role].bmp_buf, bitmap_size);
@@ -115,7 +115,7 @@ void reconstruct_stripes_xor(osd_rmw_stripe_t *stripes, int pg_size, uint32_t bi
                         assert(stripes[role].read_start >= stripes[other].read_start);
                         memxor(
                             stripes[role].read_buf,
-                            stripes[other].read_buf + (stripes[role].read_start - stripes[other].read_start),
+                            (uint8_t*)stripes[other].read_buf + (stripes[role].read_start - stripes[other].read_start),
                             stripes[role].read_buf, stripes[role].read_end - stripes[role].read_start
                         );
                         memxor(stripes[role].bmp_buf, stripes[other].bmp_buf, stripes[role].bmp_buf, bitmap_size);
@@ -202,10 +202,9 @@ reed_sol_matrix_t* get_jerasure_matrix(int pg_size, int pg_minsize)
 int* get_jerasure_decoding_matrix(osd_rmw_stripe_t *stripes, int pg_size, int pg_minsize)
 {
     int edd = 0;
-    int erased[pg_size] = { 0 };
+    int erased[pg_size];
     for (int i = 0; i < pg_size; i++)
-        if (stripes[i].read_end == 0 || stripes[i].missing)
-            erased[i] = 1;
+        erased[i] = (stripes[i].read_end == 0 || stripes[i].missing ? 1 : 0);
     for (int i = 0; i < pg_minsize; i++)
         if (stripes[i].read_end != 0 && stripes[i].missing)
             edd++;
@@ -241,7 +240,9 @@ void reconstruct_stripes_jerasure(osd_rmw_stripe_t *stripes, int pg_size, int pg
         return;
     }
     int *decoding_matrix = dm_ids + pg_minsize;
-    char *data_ptrs[pg_size] = { 0 };
+    char *data_ptrs[pg_size];
+    for (int role = 0; role < pg_size; role++)
+        data_ptrs[role] = NULL;
     for (int role = 0; role < pg_minsize; role++)
     {
         if (stripes[role].read_end != 0 && stripes[role].missing)
@@ -254,7 +255,7 @@ void reconstruct_stripes_jerasure(osd_rmw_stripe_t *stripes, int pg_size, int pg
                     {
                         assert(stripes[other].read_start <= stripes[role].read_start);
                         assert(stripes[other].read_end >= stripes[role].read_end);
-                        data_ptrs[other] = (char*)(stripes[other].read_buf + (stripes[role].read_start - stripes[other].read_start));
+                        data_ptrs[other] = (char*)stripes[other].read_buf + (stripes[role].read_start - stripes[other].read_start);
                     }
                 }
                 data_ptrs[role] = (char*)stripes[role].read_buf;
@@ -330,7 +331,7 @@ void* alloc_read_buffer(osd_rmw_stripe_t *stripes, int read_pg_size, uint64_t ad
     {
         if (stripes[role].read_end != 0)
         {
-            stripes[role].read_buf = buf + buf_pos;
+            stripes[role].read_buf = (uint8_t*)buf + buf_pos;
             buf_pos += stripes[role].read_end - stripes[role].read_start;
         }
     }
@@ -446,12 +447,12 @@ void* calc_rmw(void *request_buf, osd_rmw_stripe_t *stripes, uint64_t *read_osd_
     {
         if (stripes[role].req_end != 0)
         {
-            stripes[role].write_buf = request_buf + in_pos;
+            stripes[role].write_buf = (uint8_t*)request_buf + in_pos;
             in_pos += stripes[role].req_end - stripes[role].req_start;
         }
         else if (role >= pg_minsize && write_osd_set[role] != 0 && end != 0)
         {
-            stripes[role].write_buf = rmw_buf + buf_pos;
+            stripes[role].write_buf = (uint8_t*)rmw_buf + buf_pos;
             buf_pos += end - start;
         }
     }
@@ -476,13 +477,13 @@ static void get_old_new_buffers(osd_rmw_stripe_t & stripe, uint32_t wr_start, ui
     if (ne && (!oe || ns <= os))
     {
         // NEW or NEW->OLD
-        bufs[nbufs++] = { .buf = stripe.write_buf + ns - stripe.req_start, .len = ne-ns };
+        bufs[nbufs++] = { .buf = (uint8_t*)stripe.write_buf + ns - stripe.req_start, .len = ne-ns };
         if (os < ne)
             os = ne;
         if (oe > os)
         {
             // NEW->OLD
-            bufs[nbufs++] = { .buf = stripe.read_buf + os - stripe.read_start, .len = oe-os };
+            bufs[nbufs++] = { .buf = (uint8_t*)stripe.read_buf + os - stripe.read_start, .len = oe-os };
         }
     }
     else if (oe)
@@ -491,18 +492,18 @@ static void get_old_new_buffers(osd_rmw_stripe_t & stripe, uint32_t wr_start, ui
         if (ne)
         {
             // OLD->NEW or OLD->NEW->OLD
-            bufs[nbufs++] = { .buf = stripe.read_buf + os - stripe.read_start, .len = ns-os };
-            bufs[nbufs++] = { .buf = stripe.write_buf + ns - stripe.req_start, .len = ne-ns };
+            bufs[nbufs++] = { .buf = (uint8_t*)stripe.read_buf + os - stripe.read_start, .len = ns-os };
+            bufs[nbufs++] = { .buf = (uint8_t*)stripe.write_buf + ns - stripe.req_start, .len = ne-ns };
             if (oe > ne)
             {
                 // OLD->NEW->OLD
-                bufs[nbufs++] = { .buf = stripe.read_buf + ne - stripe.read_start, .len = oe-ne };
+                bufs[nbufs++] = { .buf = (uint8_t*)stripe.read_buf + ne - stripe.read_start, .len = oe-ne };
             }
         }
         else
         {
             // OLD
-            bufs[nbufs++] = { .buf = stripe.read_buf + os - stripe.read_start, .len = oe-os };
+            bufs[nbufs++] = { .buf = (uint8_t*)stripe.read_buf + os - stripe.read_start, .len = oe-os };
         }
     }
 }
@@ -517,7 +518,7 @@ static void xor_multiple_buffers(buf_len_t *xor1, int n1, buf_len_t *xor2, int n
     {
         // We know for sure that ranges overlap
         uint32_t end = std::min(end1, end2);
-        memxor(xor1[i1].buf + pos-start1, xor2[i2].buf + pos-start2, dest+pos, end-pos);
+        memxor((uint8_t*)xor1[i1].buf + pos-start1, (uint8_t*)xor2[i2].buf + pos-start2, (uint8_t*)dest+pos, end-pos);
         pos = end;
         if (pos >= end1)
         {
@@ -586,7 +587,7 @@ static void calc_rmw_parity_copy_mod(osd_rmw_stripe_t *stripes, int pg_size, int
             {
                 // Copy modified chunk into the read buffer to write it back
                 memcpy(
-                    stripes[role].read_buf + stripes[role].req_start,
+                    (uint8_t*)stripes[role].read_buf + stripes[role].req_start,
                     stripes[role].write_buf,
                     stripes[role].req_end - stripes[role].req_start
                 );
@@ -609,7 +610,7 @@ static void calc_rmw_parity_copy_parity(osd_rmw_stripe_t *stripes, int pg_size,
             {
                 // Copy new parity into the read buffer to write it back
                 memcpy(
-                    stripes[role].read_buf + start,
+                    (uint8_t*)stripes[role].read_buf + start,
                     stripes[role].write_buf,
                     end - start
                 );
@@ -698,9 +699,15 @@ void calc_rmw_parity_jerasure(osd_rmw_stripe_t *stripes, int pg_size, int pg_min
         {
             // Calculate new coding chunks
             buf_len_t bufs[pg_size][3];
-            int nbuf[pg_size] = { 0 }, curbuf[pg_size] = { 0 };
+            int nbuf[pg_size], curbuf[pg_size];
             uint32_t positions[pg_size];
-            void *data_ptrs[pg_size] = { 0 };
+            void *data_ptrs[pg_size];
+            for (int i = 0; i < pg_size; i++)
+            {
+                data_ptrs[i] = NULL;
+                nbuf[i] = 0;
+                curbuf[i] = 0;
+            }
             for (int i = 0; i < pg_minsize; i++)
             {
                 get_old_new_buffers(stripes[i], start, end, bufs[i], nbuf[i]);
@@ -719,7 +726,7 @@ void calc_rmw_parity_jerasure(osd_rmw_stripe_t *stripes, int pg_size, int pg_min
                 {
                     assert(curbuf[i] < nbuf[i]);
                     assert(bufs[i][curbuf[i]].buf);
-                    data_ptrs[i] = bufs[i][curbuf[i]].buf + pos-positions[i];
+                    data_ptrs[i] = (uint8_t*)bufs[i][curbuf[i]].buf + pos-positions[i];
                     uint32_t this_end = bufs[i][curbuf[i]].len + positions[i];
                     if (next_end > this_end)
                         next_end = this_end;

src/osd_rmw.h

@@ -8,7 +8,7 @@
 #include "osd_id.h"
 
 #ifndef MEM_ALIGNMENT
-#define MEM_ALIGNMENT 512
+#define MEM_ALIGNMENT 4096
 #endif
 
 struct buf_len_t

src/osd_rmw_test.cpp

@@ -90,7 +90,7 @@ void dump_stripes(osd_rmw_stripe_t *stripes, int pg_size)
 void test1()
 {
     osd_num_t osd_set[3] = { 1, 0, 3 };
-    osd_rmw_stripe_t stripes[3] = { 0 };
+    osd_rmw_stripe_t stripes[3] = {};
     // Test 1.1
     split_stripes(2, 128*1024, 128*1024-4096, 8192, stripes);
     assert(stripes[0].req_start == 128*1024-4096 && stripes[0].req_end == 128*1024);
@@ -129,7 +129,7 @@ void test4()
     const uint32_t bmp = 4;
     unsigned bitmaps[3] = { 0 };
     osd_num_t osd_set[3] = { 1, 0, 3 };
-    osd_rmw_stripe_t stripes[3] = { 0 };
+    osd_rmw_stripe_t stripes[3] = {};
     // Test 4.1
     split_stripes(2, 128*1024, 128*1024-4096, 8192, stripes);
     for (int i = 0; i < 3; i++)
@@ -142,11 +142,11 @@ void test4()
     assert(stripes[0].write_start == 128*1024-4096 && stripes[0].write_end == 128*1024);
     assert(stripes[1].write_start == 0 && stripes[1].write_end == 4096);
     assert(stripes[2].write_start == 0 && stripes[2].write_end == 128*1024);
-    assert(stripes[0].read_buf == rmw_buf+128*1024);
-    assert(stripes[1].read_buf == rmw_buf+128*1024*2);
-    assert(stripes[2].read_buf == rmw_buf+128*1024*3-4096);
+    assert(stripes[0].read_buf == (uint8_t*)rmw_buf+128*1024);
+    assert(stripes[1].read_buf == (uint8_t*)rmw_buf+128*1024*2);
+    assert(stripes[2].read_buf == (uint8_t*)rmw_buf+128*1024*3-4096);
     assert(stripes[0].write_buf == write_buf);
-    assert(stripes[1].write_buf == write_buf+4096);
+    assert(stripes[1].write_buf == (uint8_t*)write_buf+4096);
     assert(stripes[2].write_buf == rmw_buf);
     // Test 4.2
     set_pattern(write_buf, 8192, PATTERN0);
@@ -183,7 +183,7 @@ void test4()
 void test5()
 {
     osd_num_t osd_set[3] = { 1, 0, 3 };
-    osd_rmw_stripe_t stripes[3] = { 0 };
+    osd_rmw_stripe_t stripes[3] = {};
     // Test 5.1
     split_stripes(2, 128*1024, 0, 64*1024*3, stripes);
     assert(stripes[0].req_start == 0 && stripes[0].req_end == 128*1024);
@@ -198,11 +198,11 @@ void test5()
     assert(stripes[0].write_start == 0 && stripes[0].write_end == 128*1024);
     assert(stripes[1].write_start == 0 && stripes[1].write_end == 64*1024);
     assert(stripes[2].write_start == 0 && stripes[2].write_end == 128*1024);
-    assert(stripes[0].read_buf == rmw_buf+128*1024);
-    assert(stripes[1].read_buf == rmw_buf+64*3*1024);
-    assert(stripes[2].read_buf == rmw_buf+64*4*1024);
+    assert(stripes[0].read_buf == (uint8_t*)rmw_buf+128*1024);
+    assert(stripes[1].read_buf == (uint8_t*)rmw_buf+64*3*1024);
+    assert(stripes[2].read_buf == (uint8_t*)rmw_buf+64*4*1024);
     assert(stripes[0].write_buf == write_buf);
-    assert(stripes[1].write_buf == write_buf+128*1024);
+    assert(stripes[1].write_buf == (uint8_t*)write_buf+128*1024);
     assert(stripes[2].write_buf == rmw_buf);
     free(rmw_buf);
     free(write_buf);
@@ -224,7 +224,7 @@ void test5()
 void test6()
 {
     osd_num_t osd_set[3] = { 1, 2, 3 };
-    osd_rmw_stripe_t stripes[3] = { 0 };
+    osd_rmw_stripe_t stripes[3] = {};
     // Test 6.1
     split_stripes(2, 128*1024, 0, 64*1024*3, stripes);
     void *write_buf = malloc(64*1024*3);
@@ -236,10 +236,10 @@ void test6()
     assert(stripes[1].write_start == 0 && stripes[1].write_end == 64*1024);
     assert(stripes[2].write_start == 0 && stripes[2].write_end == 128*1024);
     assert(stripes[0].read_buf == 0);
-    assert(stripes[1].read_buf == rmw_buf+128*1024);
+    assert(stripes[1].read_buf == (uint8_t*)rmw_buf+128*1024);
     assert(stripes[2].read_buf == 0);
     assert(stripes[0].write_buf == write_buf);
-    assert(stripes[1].write_buf == write_buf+128*1024);
+    assert(stripes[1].write_buf == (uint8_t*)write_buf+128*1024);
     assert(stripes[2].write_buf == rmw_buf);
     free(rmw_buf);
     free(write_buf);
@@ -267,7 +267,7 @@ void test7()
 {
     osd_num_t osd_set[3] = { 1, 0, 3 };
     osd_num_t write_osd_set[3] = { 1, 2, 3 };
-    osd_rmw_stripe_t stripes[3] = { 0 };
+    osd_rmw_stripe_t stripes[3] = {};
     // Test 7.1
     split_stripes(2, 128*1024, 128*1024-4096, 8192, stripes);
     void *write_buf = malloc(8192);
@@ -278,11 +278,11 @@ void test7()
     assert(stripes[0].write_start == 128*1024-4096 && stripes[0].write_end == 128*1024);
     assert(stripes[1].write_start == 0 && stripes[1].write_end == 4096);
     assert(stripes[2].write_start == 0 && stripes[2].write_end == 128*1024);
-    assert(stripes[0].read_buf == rmw_buf+128*1024);
-    assert(stripes[1].read_buf == rmw_buf+128*1024*2);
-    assert(stripes[2].read_buf == rmw_buf+128*1024*3);
+    assert(stripes[0].read_buf == (uint8_t*)rmw_buf+128*1024);
+    assert(stripes[1].read_buf == (uint8_t*)rmw_buf+128*1024*2);
+    assert(stripes[2].read_buf == (uint8_t*)rmw_buf+128*1024*3);
     assert(stripes[0].write_buf == write_buf);
-    assert(stripes[1].write_buf == write_buf+4096);
+    assert(stripes[1].write_buf == (uint8_t*)write_buf+4096);
     assert(stripes[2].write_buf == rmw_buf);
     // Test 7.2
     set_pattern(write_buf, 8192, PATTERN0);
@@ -320,7 +320,7 @@ void test8()
 {
     osd_num_t osd_set[3] = { 0, 2, 3 };
     osd_num_t write_osd_set[3] = { 1, 2, 3 };
-    osd_rmw_stripe_t stripes[3] = { 0 };
+    osd_rmw_stripe_t stripes[3] = {};
     // Test 8.1
     split_stripes(2, 128*1024, 0, 128*1024+4096, stripes);
     void *write_buf = malloc(128*1024+4096);
@@ -332,10 +332,10 @@ void test8()
     assert(stripes[1].write_start == 0 && stripes[1].write_end == 4096);
     assert(stripes[2].write_start == 0 && stripes[2].write_end == 128*1024);
     assert(stripes[0].read_buf == NULL);
-    assert(stripes[1].read_buf == rmw_buf+128*1024);
+    assert(stripes[1].read_buf == (uint8_t*)rmw_buf+128*1024);
     assert(stripes[2].read_buf == NULL);
     assert(stripes[0].write_buf == write_buf);
-    assert(stripes[1].write_buf == write_buf+128*1024);
+    assert(stripes[1].write_buf == (uint8_t*)write_buf+128*1024);
     assert(stripes[2].write_buf == rmw_buf);
     // Test 8.2
     set_pattern(write_buf, 128*1024+4096, PATTERN0);
@@ -345,7 +345,7 @@ void test8()
     assert(stripes[1].write_start == 0 && stripes[1].write_end == 4096);     // recheck again
     assert(stripes[2].write_start == 0 && stripes[2].write_end == 128*1024); // recheck again
     assert(stripes[0].write_buf == write_buf);                               // recheck again
-    assert(stripes[1].write_buf == write_buf+128*1024);                      // recheck again
+    assert(stripes[1].write_buf == (uint8_t*)write_buf+128*1024);                      // recheck again
     assert(stripes[2].write_buf == rmw_buf);                                 // recheck again
     check_pattern(stripes[2].write_buf, 4096, 0); // new parity
     check_pattern(stripes[2].write_buf+4096, 128*1024-4096, PATTERN0^PATTERN1); // new parity
@@ -375,7 +375,7 @@ void test9()
 {
     osd_num_t osd_set[3] = { 0, 2, 3 };
     osd_num_t write_osd_set[3] = { 1, 2, 3 };
-    osd_rmw_stripe_t stripes[3] = { 0 };
+    osd_rmw_stripe_t stripes[3] = {};
     // Test 9.0
     split_stripes(2, 128*1024, 64*1024, 0, stripes);
     assert(stripes[0].req_start == 0 && stripes[0].req_end == 0);
@@ -391,8 +391,8 @@ void test9()
     assert(stripes[1].write_start == 0 && stripes[1].write_end == 0);
     assert(stripes[2].write_start == 0 && stripes[2].write_end == 0);
     assert(stripes[0].read_buf == rmw_buf);
-    assert(stripes[1].read_buf == rmw_buf+128*1024);
-    assert(stripes[2].read_buf == rmw_buf+128*1024*2);
+    assert(stripes[1].read_buf == (uint8_t*)rmw_buf+128*1024);
+    assert(stripes[2].read_buf == (uint8_t*)rmw_buf+128*1024*2);
     assert(stripes[0].write_buf == NULL);
     assert(stripes[1].write_buf == NULL);
     assert(stripes[2].write_buf == NULL);
@@ -430,7 +430,7 @@ void test10()
 {
     osd_num_t osd_set[3] = { 1, 0, 0 };
     osd_num_t write_osd_set[3] = { 1, 2, 3 };
-    osd_rmw_stripe_t stripes[3] = { 0 };
+    osd_rmw_stripe_t stripes[3] = {};
     // Test 10.0
     split_stripes(2, 128*1024, 0, 256*1024, stripes);
     assert(stripes[0].req_start == 0 && stripes[0].req_end == 128*1024);
@@ -450,7 +450,7 @@ void test10()
     assert(stripes[1].read_buf == NULL);
     assert(stripes[2].read_buf == NULL);
     assert(stripes[0].write_buf == write_buf);
-    assert(stripes[1].write_buf == write_buf+128*1024);
+    assert(stripes[1].write_buf == (uint8_t*)write_buf+128*1024);
     assert(stripes[2].write_buf == rmw_buf);
     // Test 10.2
     set_pattern(stripes[0].write_buf, 128*1024, PATTERN1);
@@ -460,7 +460,7 @@ void test10()
     assert(stripes[1].write_start == 0 && stripes[1].write_end == 128*1024);
     assert(stripes[2].write_start == 0 && stripes[2].write_end == 128*1024);
     assert(stripes[0].write_buf == write_buf);
-    assert(stripes[1].write_buf == write_buf+128*1024);
+    assert(stripes[1].write_buf == (uint8_t*)write_buf+128*1024);
     assert(stripes[2].write_buf == rmw_buf);
     check_pattern(stripes[2].write_buf, 128*1024, PATTERN1^PATTERN2);
     free(rmw_buf);
@@ -486,7 +486,7 @@ void test11()
 {
     osd_num_t osd_set[3] = { 1, 0, 0 };
     osd_num_t write_osd_set[3] = { 1, 2, 3 };
-    osd_rmw_stripe_t stripes[3] = { 0 };
+    osd_rmw_stripe_t stripes[3] = {};
     // Test 11.0
     split_stripes(2, 128*1024, 128*1024, 256*1024, stripes);
     assert(stripes[0].req_start == 0 && stripes[0].req_end == 0);
@@ -502,7 +502,7 @@ void test11()
     assert(stripes[0].write_start == 0 && stripes[0].write_end == 0);
     assert(stripes[1].write_start == 0 && stripes[1].write_end == 128*1024);
     assert(stripes[2].write_start == 0 && stripes[2].write_end == 128*1024);
-    assert(stripes[0].read_buf == rmw_buf+128*1024);
+    assert(stripes[0].read_buf == (uint8_t*)rmw_buf+128*1024);
     assert(stripes[1].read_buf == NULL);
     assert(stripes[2].read_buf == NULL);
     assert(stripes[0].write_buf == NULL);
@@ -542,7 +542,7 @@ void test12()
 {
     osd_num_t osd_set[3] = { 1, 2, 0 };
     osd_num_t write_osd_set[3] = { 1, 2, 3 };
-    osd_rmw_stripe_t stripes[3] = { 0 };
+    osd_rmw_stripe_t stripes[3] = {};
     // Test 12.0
     split_stripes(2, 128*1024, 0, 0, stripes);
     assert(stripes[0].req_start == 0 && stripes[0].req_end == 0);
@@ -557,8 +557,8 @@ void test12()
     assert(stripes[0].write_start == 0 && stripes[0].write_end == 0);
     assert(stripes[1].write_start == 0 && stripes[1].write_end == 0);
     assert(stripes[2].write_start == 0 && stripes[2].write_end == 128*1024);
-    assert(stripes[0].read_buf == rmw_buf+128*1024);
-    assert(stripes[1].read_buf == rmw_buf+2*128*1024);
+    assert(stripes[0].read_buf == (uint8_t*)rmw_buf+128*1024);
+    assert(stripes[1].read_buf == (uint8_t*)rmw_buf+2*128*1024);
     assert(stripes[2].read_buf == NULL);
     assert(stripes[0].write_buf == NULL);
     assert(stripes[1].write_buf == NULL);
@@ -597,7 +597,7 @@ void test13()
     use_jerasure(4, 2, true);
     osd_num_t osd_set[4] = { 1, 2, 0, 0 };
     osd_num_t write_osd_set[4] = { 1, 2, 3, 4 };
-    osd_rmw_stripe_t stripes[4] = { 0 };
+    osd_rmw_stripe_t stripes[4] = {};
     // Test 13.0
     void *write_buf = malloc_or_die(8192);
     split_stripes(2, 128*1024, 128*1024-4096, 8192, stripes);
@@ -616,14 +616,14 @@ void test13()
     assert(stripes[1].write_start == 0 && stripes[1].write_end == 4096);
     assert(stripes[2].write_start == 0 && stripes[2].write_end == 128*1024);
     assert(stripes[3].write_start == 0 && stripes[3].write_end == 128*1024);
-    assert(stripes[0].read_buf == rmw_buf+2*128*1024);
-    assert(stripes[1].read_buf == rmw_buf+3*128*1024-4096);
+    assert(stripes[0].read_buf == (uint8_t*)rmw_buf+2*128*1024);
+    assert(stripes[1].read_buf == (uint8_t*)rmw_buf+3*128*1024-4096);
     assert(stripes[2].read_buf == NULL);
     assert(stripes[3].read_buf == NULL);
     assert(stripes[0].write_buf == write_buf);
-    assert(stripes[1].write_buf == write_buf+4096);
+    assert(stripes[1].write_buf == (uint8_t*)write_buf+4096);
     assert(stripes[2].write_buf == rmw_buf);
-    assert(stripes[3].write_buf == rmw_buf+128*1024);
+    assert(stripes[3].write_buf == (uint8_t*)rmw_buf+128*1024);
     // Test 13.2 - encode
     set_pattern(write_buf, 8192, PATTERN3);
     set_pattern(stripes[0].read_buf, 128*1024-4096, PATTERN1);
@@ -634,9 +634,9 @@ void test13()
     assert(stripes[2].write_start == 0 && stripes[2].write_end == 128*1024);
     assert(stripes[3].write_start == 0 && stripes[3].write_end == 128*1024);
     assert(stripes[0].write_buf == write_buf);
-    assert(stripes[1].write_buf == write_buf+4096);
+    assert(stripes[1].write_buf == (uint8_t*)write_buf+4096);
     assert(stripes[2].write_buf == rmw_buf);
-    assert(stripes[3].write_buf == rmw_buf+128*1024);
+    assert(stripes[3].write_buf == (uint8_t*)rmw_buf+128*1024);
     // Test 13.3 - full decode and verify
     osd_num_t read_osd_set[4] = { 0, 0, 3, 4 };
     memset(stripes, 0, sizeof(stripes));
@@ -658,11 +658,11 @@ void test13()
     void *read_buf = alloc_read_buffer(stripes, 4, 0);
     assert(read_buf);
     assert(stripes[0].read_buf == read_buf);
-    assert(stripes[1].read_buf == read_buf+128*1024);
-    assert(stripes[2].read_buf == read_buf+2*128*1024);
-    assert(stripes[3].read_buf == read_buf+3*128*1024);
-    memcpy(read_buf+2*128*1024, rmw_buf, 128*1024);
-    memcpy(read_buf+3*128*1024, rmw_buf+128*1024, 128*1024);
+    assert(stripes[1].read_buf == (uint8_t*)read_buf+128*1024);
+    assert(stripes[2].read_buf == (uint8_t*)read_buf+2*128*1024);
+    assert(stripes[3].read_buf == (uint8_t*)read_buf+3*128*1024);
+    memcpy((uint8_t*)read_buf+2*128*1024, rmw_buf, 128*1024);
+    memcpy((uint8_t*)read_buf+3*128*1024, (uint8_t*)rmw_buf+128*1024, 128*1024);
     reconstruct_stripes_jerasure(stripes, 4, 2, 0);
     check_pattern(stripes[0].read_buf, 128*1024-4096, PATTERN1);
     check_pattern(stripes[0].read_buf+128*1024-4096, 4096, PATTERN3);
@@ -690,10 +690,10 @@ void test13()
     assert(read_buf);
     assert(stripes[0].read_buf == read_buf);
     assert(stripes[1].read_buf == NULL);
-    assert(stripes[2].read_buf == read_buf+128*1024);
-    assert(stripes[3].read_buf == read_buf+2*128*1024);
-    memcpy(read_buf+128*1024, rmw_buf, 128*1024);
-    memcpy(read_buf+2*128*1024, rmw_buf+128*1024, 128*1024);
+    assert(stripes[2].read_buf == (uint8_t*)read_buf+128*1024);
+    assert(stripes[3].read_buf == (uint8_t*)read_buf+2*128*1024);
+    memcpy((uint8_t*)read_buf+128*1024, rmw_buf, 128*1024);
+    memcpy((uint8_t*)read_buf+2*128*1024, (uint8_t*)rmw_buf+128*1024, 128*1024);
     reconstruct_stripes_jerasure(stripes, 4, 2, 0);
     check_pattern(stripes[0].read_buf, 128*1024-4096, PATTERN1);
     check_pattern(stripes[0].read_buf+128*1024-4096, 4096, PATTERN3);
@@ -725,7 +725,7 @@ void test14()
     use_jerasure(3, 2, true);
     osd_num_t osd_set[3] = { 1, 2, 0 };
     osd_num_t write_osd_set[3] = { 1, 2, 3 };
-    osd_rmw_stripe_t stripes[3] = { 0 };
+    osd_rmw_stripe_t stripes[3] = {};
     unsigned bitmaps[3] = { 0 };
     // Test 13.0
     void *write_buf = malloc_or_die(8192);
@@ -744,11 +744,11 @@ void test14()
     assert(stripes[0].write_start == 128*1024-4096 && stripes[0].write_end == 128*1024);
     assert(stripes[1].write_start == 0 && stripes[1].write_end == 4096);
     assert(stripes[2].write_start == 0 && stripes[2].write_end == 128*1024);
-    assert(stripes[0].read_buf == rmw_buf+128*1024);
-    assert(stripes[1].read_buf == rmw_buf+2*128*1024-4096);
+    assert(stripes[0].read_buf == (uint8_t*)rmw_buf+128*1024);
+    assert(stripes[1].read_buf == (uint8_t*)rmw_buf+2*128*1024-4096);
     assert(stripes[2].read_buf == NULL);
     assert(stripes[0].write_buf == write_buf);
-    assert(stripes[1].write_buf == write_buf+4096);
+    assert(stripes[1].write_buf == (uint8_t*)write_buf+4096);
     assert(stripes[2].write_buf == rmw_buf);
     // Test 13.2 - encode
     set_pattern(write_buf, 8192, PATTERN3);
@@ -765,7 +765,7 @@ void test14()
     assert(stripes[1].write_start == 0 && stripes[1].write_end == 4096);
     assert(stripes[2].write_start == 0 && stripes[2].write_end == 128*1024);
     assert(stripes[0].write_buf == write_buf);
-    assert(stripes[1].write_buf == write_buf+4096);
+    assert(stripes[1].write_buf == (uint8_t*)write_buf+4096);
     assert(stripes[2].write_buf == rmw_buf);
     // Test 13.3 - decode and verify
     osd_num_t read_osd_set[4] = { 0, 2, 3 };
@@ -788,8 +788,8 @@ void test14()
         stripes[i].bmp_buf = bitmaps+i;
     assert(read_buf);
     assert(stripes[0].read_buf == read_buf);
-    assert(stripes[1].read_buf == read_buf+128*1024);
-    assert(stripes[2].read_buf == read_buf+2*128*1024);
+    assert(stripes[1].read_buf == (uint8_t*)read_buf+128*1024);
+    assert(stripes[2].read_buf == (uint8_t*)read_buf+2*128*1024);
     set_pattern(stripes[1].read_buf, 4096, PATTERN3);
     set_pattern(stripes[1].read_buf+4096, 128*1024-4096, PATTERN2);
     memcpy(stripes[2].read_buf, rmw_buf, 128*1024);

src/osd_secondary.cpp

@@ -54,8 +54,8 @@ void osd_t::exec_secondary(osd_op_t *cur_op)
             void *cur_buf = reply_buf;
             for (int i = 0; i < n; i++)
             {
-                bs->read_bitmap(ov[i].oid, ov[i].version, cur_buf + sizeof(uint64_t), (uint64_t*)cur_buf);
-                cur_buf += (8 + clean_entry_bitmap_size);
+                bs->read_bitmap(ov[i].oid, ov[i].version, (uint8_t*)cur_buf + sizeof(uint64_t), (uint64_t*)cur_buf);
+                cur_buf = (uint8_t*)cur_buf + (8 + clean_entry_bitmap_size);
             }
             free(cur_op->buf);
             cur_op->buf = reply_buf;
@@ -159,7 +159,7 @@ void osd_t::exec_show_config(osd_op_t *cur_op)
         { "readonly", readonly },
         { "immediate_commit", (immediate_commit == IMMEDIATE_ALL ? "all" :
             (immediate_commit == IMMEDIATE_SMALL ? "small" : "none")) },
-        { "lease_timeout", etcd_report_interval+(MAX_ETCD_ATTEMPTS*(2*ETCD_QUICK_TIMEOUT)+999)/1000 },
+        { "lease_timeout", etcd_report_interval+(st_cli.max_etcd_attempts*(2*st_cli.etcd_quick_timeout)+999)/1000 },
     };
 #ifdef WITH_RDMA
     if (msgr.is_rdma_enabled())