bump version to 9.1.2-3

Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>

.gitignore

@@ -0,0 +1,7 @@
+/*.build
+/*.buildinfo
+/*.changes
+/*.deb
+/*.dsc
+/*.tar*
+/pve-qemu-kvm-*.*/

Makefile

@@ -1,60 +1,90 @@
-include /usr/share/dpkg/pkg-info.mk
-include /usr/share/dpkg/architecture.mk
+include /usr/share/dpkg/default.mk
 
 PACKAGE = pve-qemu-kvm
 
 SRCDIR := qemu
-BUILDDIR ?= ${PACKAGE}-${DEB_VERSION_UPSTREAM}
+BUILDDIR ?= $(PACKAGE)-$(DEB_VERSION_UPSTREAM)
+ORIG_SRC_TAR=$(PACKAGE)_$(DEB_VERSION_UPSTREAM).orig.tar.gz
 
 GITVERSION := $(shell git rev-parse HEAD)
 
-DEB = ${PACKAGE}_${DEB_VERSION_UPSTREAM_REVISION}_${DEB_BUILD_ARCH}.deb
-DEB_DBG = ${PACKAGE}-dbg_${DEB_VERSION_UPSTREAM_REVISION}_${DEB_BUILD_ARCH}.deb
+DSC=$(PACKAGE)_$(DEB_VERSION_UPSTREAM_REVISION).dsc
+DEB = $(PACKAGE)_$(DEB_VERSION_UPSTREAM_REVISION)_$(DEB_BUILD_ARCH).deb
+DEB_DBG = $(PACKAGE)-dbgsym_$(DEB_VERSION_UPSTREAM_REVISION)_$(DEB_BUILD_ARCH).deb
 DEBS = $(DEB) $(DEB_DBG)
 
 all: $(DEBS)
 
 .PHONY: submodule
 submodule:
-	test -f "${SRCDIR}/configure" || git submodule update --init --recursive
+ifeq ($(shell test -f "$(SRCDIR)/configure" && echo 1 || echo 0), 0)
+	git submodule update --init --recursive
+	cd $(SRCDIR); meson subprojects download
+endif
 
-$(BUILDDIR): keycodemapdb | submodule
+PC_BIOS_FW_PURGE_LIST_IN = \
+	hppa-firmware.img \
+	hppa-firmware64.img \
+	openbios-ppc \
+	openbios-sparc32 \
+	openbios-sparc64 \
+	palcode-clipper \
+	s390-ccw.img \
+	s390-netboot.img \
+	u-boot.e500 \
+	.*[a-zA-Z0-9]\.dtb \
+	.*[a-zA-Z0-9]\.dts \
+	qemu_vga.ndrv \
+	slof.bin \
+	opensbi-riscv.*-generic-fw_dynamic.bin \
+
+BLOB_PURGE_SED_CMDS = $(foreach FILE,$(PC_BIOS_FW_PURGE_LIST_IN),-e "/$(FILE)/d")
+BLOB_PURGE_FILTER = $(foreach FILE,$(PC_BIOS_FW_PURGE_LIST_IN),-e "$(FILE)")
+
+$(BUILDDIR): submodule
 	# check if qemu/ was used for a build
 	# if so, please run 'make distclean' in the submodule and try again
 	test ! -f $(SRCDIR)/build/config.status
-	rm -rf $(BUILDDIR)
-	cp -a $(SRCDIR) $(BUILDDIR)
-	cp -a debian $(BUILDDIR)/debian
-	rm -rf $(BUILDDIR)/ui/keycodemapdb
-	cp -a keycodemapdb $(BUILDDIR)/ui/
-	echo "git clone git://git.proxmox.com/git/pve-qemu.git\\ngit checkout $(GITVERSION)" > $(BUILDDIR)/debian/SOURCE
+	rm -rf $@.tmp $@
+	cp -a $(SRCDIR) $@.tmp
+	cp -a debian $@.tmp/debian
+	rm -rf $@.tmp/roms/edk2 # packaged separately
+	find $@.tmp/pc-bios -type f | grep $(BLOB_PURGE_FILTER) | xargs rm -f
+	sed -i $(BLOB_PURGE_SED_CMDS) $@.tmp/pc-bios/meson.build
+	echo "git clone git://git.proxmox.com/git/pve-qemu.git\\ngit checkout $(GITVERSION)" > $@.tmp/debian/SOURCE
+	mv $@.tmp $@
 
 .PHONY: deb kvm
 deb kvm: $(DEBS)
 $(DEB_DBG): $(DEB)
 $(DEB): $(BUILDDIR)
-	cd $(BUILDDIR); dpkg-buildpackage -b -us -uc -j
+	cd $(BUILDDIR); dpkg-buildpackage -b -us -uc
 	lintian $(DEBS)
 
-.PHONY: update
-update:
-	cd $(SRCDIR) && git submodule deinit ui/keycodemapdb || true
-	rm -rf $(SRCDIR)/ui/keycodemapdb
-	mkdir $(SRCDIR)/ui/keycodemapdb
-	cd $(SRCDIR) && git submodule update --init ui/keycodemapdb
-	rm -rf keycodemapdb
-	mkdir keycodemapdb
-	cp -R $(SRCDIR)/ui/keycodemapdb/* keycodemapdb/
-	git add keycodemapdb
+sbuild: $(DSC)
+	sbuild $(DSC)
+
+$(ORIG_SRC_TAR): $(BUILDDIR)
+	tar czf $(ORIG_SRC_TAR) --exclude="$(BUILDDIR)/debian" $(BUILDDIR)
+
+.PHONY: dsc
+dsc:
+	rm -rf *.dsc $(BUILDDIR)
+	$(MAKE) $(DSC)
+	lintian $(DSC)
+
+$(DSC): $(ORIG_SRC_TAR) $(BUILDDIR)
+	cd $(BUILDDIR); dpkg-buildpackage -S -us -uc -d
 
 .PHONY: upload
+upload: UPLOAD_DIST ?= $(DEB_DISTRIBUTION)
 upload: $(DEBS)
-	tar cf - ${DEBS} | ssh repoman@repo.proxmox.com upload --product pve --dist bullseye
+	tar cf - $(DEBS) | ssh repoman@repo.proxmox.com upload --product pve --dist $(UPLOAD_DIST)
 
 .PHONY: distclean clean
 distclean: clean
 clean:
-	rm -rf $(BUILDDIR) $(PACKAGE)*.deb *.buildinfo *.changes
+	rm -rf $(PACKAGE)-[0-9]*/ $(PACKAGE)*.tar* *.deb *.dsc *.build *.buildinfo *.changes
 
 .PHONY: dinstall
 dinstall: $(DEBS)

debian/changelog

@@ -1,3 +1,566 @@
+pve-qemu-kvm (9.1.2-3) bookworm; urgency=medium
+
+  * async snapshot: explicitly specify raw format when loading the VM state
+    file
+
+  * vma create: rework CLI parameters for passing disk to a more structured
+    style and use that to allow explicitly specifying the format
+
+ -- Proxmox Support Team <support@proxmox.com>  Fri, 24 Jan 2025 16:12:34 +0100
+
+pve-qemu-kvm (9.1.2-2) bookworm; urgency=medium
+
+  * adapt machine version deprecation for Proxmox VE release and support
+    cycle.
+
+ -- Proxmox Support Team <support@proxmox.com>  Fri, 17 Jan 2025 16:34:06 +0100
+
+pve-qemu-kvm (9.1.2-1) bookworm; urgency=medium
+
+  * update submodule and patches to QEMU 9.1.2
+
+  * improve error handling and edge cases with fleecing backups.
+
+ -- Proxmox Support Team <support@proxmox.com>  Wed, 11 Dec 2024 16:47:21 +0100
+
+pve-qemu-kvm (9.0.2-4) bookworm; urgency=medium
+
+  * async snapshot: ensure any dynamic vCPU-throttling applied for
+    auto-converge gets always disabled again after finishing the snapshot.
+
+ -- Proxmox Support Team <support@proxmox.com>  Sun, 10 Nov 2024 11:23:09 +0100
+
+pve-qemu-kvm (9.0.2-3) bookworm; urgency=medium
+
+  * pick up fix for VirtIO PCI regressions
+
+  * pick up stable fixes for 9.0, including fixes for VirtIO-net, ARM and
+    x86(_64) emulation, CVEs to harden NBD server against malicious clients,
+    as well as a few others (VNC, physmem, Intel IOMMU, ...).
+
+ -- Proxmox Support Team <support@proxmox.com>  Fri, 06 Sep 2024 16:21:42 +0200
+
+pve-qemu-kvm (9.0.2-2) bookworm; urgency=medium
+
+  * actually update submodule to QEMU 9.0.2. The previous release was still
+    based on 9.0.0 by mistake.
+
+ -- Proxmox Support Team <support@proxmox.com>  Wed, 07 Aug 2024 10:16:01 +0200
+
+pve-qemu-kvm (9.0.2-1) bookworm; urgency=medium
+
+  * update submodule and patches to QEMU 9.0.2. While our version had most
+    stable fixes included already, there are new fixes for VirtIO and VGA
+    display screen blanking (#4786)
+
+  * backport fix for a regression with the LSI-53c895a controller and one for
+    the boot order getting ignored for USB storage
+
+ -- Proxmox Support Team <support@proxmox.com>  Mon, 29 Jul 2024 18:59:40 +0200
+
+pve-qemu-kvm (9.0.0-6) bookworm; urgency=medium
+
+  * fix a regression in the zeroinit block driver that prevented importing and
+    cloning disks to RBD storages which are not using the krbd setting
+
+ -- Proxmox Support Team <support@proxmox.com>  Mon, 08 Jul 2024 16:11:15 +0200
+
+pve-qemu-kvm (9.0.0-5) bookworm; urgency=medium
+
+  * backport fix for CVE-2024-4467 to prevent malicious qcow2 image files from
+    already causing bad effects if being queried via 'qemu-img info'. For
+    Proxmox VE, this is an additional safe guard, as currently it directly
+    creates and manages the qcow2 images used by VMs and does not allow
+    unprivileged users to import them
+
+  * fix #4726: code cleanup: avoid superfluous check in vma backup code
+
+ -- Proxmox Support Team <support@proxmox.com>  Wed, 03 Jul 2024 13:13:35 +0200
+
+pve-qemu-kvm (9.0.0-4) bookworm; urgency=medium
+
+  * fix crash after saving a snapshot without including VM state when a VirtIO
+    block device with iothread is configured.
+
+  * fix edge case in error handling when opening a block device from PBS fails
+
+  * minor code cleanup in backup code
+
+ -- Proxmox Support Team <support@proxmox.com>  Mon, 01 Jul 2024 11:26:11 +0200
+
+pve-qemu-kvm (9.0.0-3) bookworm; urgency=medium
+
+  * fix crash when doing resize after hotplugging a disk using io_uring
+
+  * fix some minor issues in software CPU emulation (i.e. non-KVM) for ARM and
+    x86(_64)
+
+ -- Proxmox Support Team <support@proxmox.com>  Wed, 29 May 2024 15:55:44 +0200
+
+pve-qemu-kvm (9.0.0-2) bookworm; urgency=medium
+
+  * fix #5409: backup: fix copy-before-write timeout
+
+  * backup: improve error when copy-before-write fails for fleecing
+
+  * fix forwards and backwards migration with VirtIO-GPU display
+
+  * fix a regression in pflash device introduced in 8.2
+
+  * revert a commit for VirtIO PCI devices that turned out to cause more
+    potential security issues than what it fixed
+
+  * move compatibility flags for a new VirtIO-net feature to the correct
+    machine type. The feature was introduced in QEMU 8.2, but the
+    compatibility flags got added to machine version 8.0 instead of 8.1. This
+    breaks backwards migration with machine version 8.1 from a 8.2/9.0 binary
+    to an 8.1 binary, in cases where the guest kernel enables the feature
+    (e.g. Ubuntu 23.10).
+    While that breaks migration with machine version 8.1 from an unpatched to
+    a patched binary, Proxmox VE only ever had 8.2 on the test repository and
+    9.0 not yet in any public repository.
+
+ -- Proxmox Support Team <support@proxmox.com>  Fri, 17 May 2024 17:04:52 +0200
+
+pve-qemu-kvm (9.0.0-1) bookworm; urgency=medium
+
+  * update submodule and patches to QEMU 9.0.0
+
+ -- Proxmox Support Team <support@proxmox.com>  Mon, 29 Apr 2024 10:51:37 +0200
+
+pve-qemu-kvm (8.2.2-1) bookworm; urgency=medium
+
+  * update submodule and patches to QEMU 8.2.2
+
+ -- Proxmox Support Team <support@proxmox.com>  Sat, 27 Apr 2024 12:44:30 +0200
+
+pve-qemu-kvm (8.1.5-5) bookworm; urgency=medium
+
+  * implement support for backup fleecing
+
+ -- Proxmox Support Team <support@proxmox.com>  Thu, 11 Apr 2024 17:46:48 +0200
+
+pve-qemu-kvm (8.1.5-4) bookworm; urgency=medium
+
+  * fix live-import for certain kinds of VMDK images that rely on padding
+
+  * backup: avoid bubbling up first error if it's an ECANCELED one, as those
+    are often a result of cancling the job due to running into an actual
+    issue.
+
+  * backup: factor out & clean up gathering device info into helper
+
+ -- Proxmox Support Team <support@proxmox.com>  Tue, 12 Mar 2024 14:08:40 +0100
+
+pve-qemu-kvm (8.1.5-3) bookworm; urgency=medium
+
+  * backport fix for potential deadlock during QMP stop command if the VM has
+    disks attached through VirtIO-Block and IO-Thread enabled
+
+  * fix #4507: add patch to automatically increase NOFILE soft limit
+
+ -- Proxmox Support Team <support@proxmox.com>  Wed, 21 Feb 2024 20:11:23 +0100
+
+pve-qemu-kvm (8.1.5-2) bookworm; urgency=medium
+
+  * work around for a situation where guest IO might get stuck, if the VM is
+    configure  with iothread and VirtIO block/SCSI
+
+ -- Proxmox Support Team <support@proxmox.com>  Fri, 02 Feb 2024 19:41:27 +0100
+
+pve-qemu-kvm (8.1.5-1) bookworm; urgency=medium
+
+  * update to 8.1.5 stable release, including more relevant fixes like:
+    - virtio-net: correctly copy vnet header when flushing TX
+    - hw/pflash: implement update buffer for block writes
+    - Fixes to i386 emulation and ARM emulation.
+
+ -- Proxmox Support Team <support@proxmox.com>  Fri, 02 Feb 2024 19:08:13 +0100
+
+pve-qemu-kvm (8.1.2-6) bookworm; urgency=medium
+
+  * revert attempted fix to avoid rare issue with stuck guest IO when using
+    iothread, because it caused a much more common issue with iothreads
+    consuming too much CPU
+
+ -- Proxmox Support Team <support@proxmox.com>  Fri, 15 Dec 2023 14:22:06 +0100
+
+pve-qemu-kvm (8.1.2-5) bookworm; urgency=medium
+
+  * backport workaround for stuck guest IO with iothread and VirtIO block/SCSI
+    in some rare edge cases
+
+  * backport fix for potential deadlock when issuing the "resize" QMP command
+    for a disk that is using iothread
+
+ -- Proxmox Support Team <support@proxmox.com>  Mon, 11 Dec 2023 16:58:27 +0100
+
+pve-qemu-kvm (8.1.2-4) bookworm; urgency=medium
+
+  * fix vnc clipboard in the host to guest direction
+
+ -- Proxmox Support Team <support@proxmox.com>  Wed, 22 Nov 2023 14:28:21 +0100
+
+pve-qemu-kvm (8.1.2-3) bookworm; urgency=medium
+
+  * fix #5054: backport fix for software reset with SATA, avoiding breakage
+    with, e.g., some FreeBSD VMs
+
+ -- Proxmox Support Team <support@proxmox.com>  Mon, 20 Nov 2023 10:24:50 +0100
+
+pve-qemu-kvm (8.1.2-2) bookworm; urgency=medium
+
+  * revert "x86: acpi: workaround Windows not handling name references in
+    Package properly" as that seems to have broken networking (and possibly
+    other things) one some localized variants of Windows (e.g., the German
+    versions).
+
+ -- Proxmox Support Team <support@proxmox.com>  Fri, 17 Nov 2023 11:55:23 +0100
+
+pve-qemu-kvm (8.1.2-1) bookworm; urgency=medium
+
+  * update submodule and patches to QEMU 8.1.2
+
+  * use QEMU's keycode-map-db again instead of our static copy from QEMU 6.0
+
+  * disable graph locking, newly introduced in the 8.1 release, as it has
+    still various deadlock issuess, e.g., during canceling backup jobs.
+
+ -- Proxmox Support Team <support@proxmox.com>  Tue, 24 Oct 2023 13:42:45 +0200
+
+pve-qemu-kvm (8.0.2-7) bookworm; urgency=medium
+
+  * fix #2874: SATA: avoid unsolicited write to sector 0 during reset
+
+ -- Proxmox Support Team <support@proxmox.com>  Wed, 04 Oct 2023 08:33:35 +0200
+
+pve-qemu-kvm (8.0.2-6) bookworm; urgency=medium
+
+  * fix #1534: vma: add extract-filter for disk images allowing users to pass
+    a comma separated list of the disks they want to extract from an archive.
+
+  * backup: create jobs in a drained section to avoid subtle bugs where
+    something interferes with the block-copy-state bitmap on initialization
+
+  * backup: drop experimental, and since a while also fully broken, directory
+    backup format (BACKUP_FORMAT_DIR). This format was never exposed via the
+    Proxmox VE API, but only available via QMP, as its broken since QEMU 8 and
+    we got zero reports about that, it's safe to assume that there are no
+    public users, so just remove it completely.
+
+ -- Proxmox Support Team <support@proxmox.com>  Wed, 06 Sep 2023 17:03:59 +0200
+
+pve-qemu-kvm (8.0.2-5) bookworm; urgency=medium
+
+  * improve memory footprint after backup by not keeping as much memory
+    resident.
+
+  * fix file descriptor leak for vhost (used by default by vNICs).
+
+ -- Proxmox Support Team <support@proxmox.com>  Wed, 16 Aug 2023 11:52:24 +0200
+
+pve-qemu-kvm (8.0.2-4) bookworm; urgency=medium
+
+  * fix resume for snapshot and hibernate in combination with iothread and
+    dirty bitmap
+
+ -- Proxmox Support Team <support@proxmox.com>  Fri, 28 Jul 2023 12:58:22 +0200
+
+pve-qemu-kvm (8.0.2-3) bookworm; urgency=medium
+
+  * fix regression in QEMU 8.0 for drive mirror with bitmap
+
+ -- Proxmox Support Team <support@proxmox.com>  Thu, 15 Jun 2023 13:57:46 +0200
+
+pve-qemu-kvm (8.0.2-2) bookworm; urgency=medium
+
+  * drop custom get_link_status QMP command, was never really used.
+
+  * drop custom & deprecated drive snapshot QMP commands, we use a better
+    alternative since a while.
+
+ -- Proxmox Support Team <support@proxmox.com>  Fri, 09 Jun 2023 07:57:56 +0200
+
+pve-qemu-kvm (8.0.2-1) bookworm; urgency=medium
+
+  * update to QEMU stable release 8.0.2
+
+  * update patches for avoiding issues with DMA reentrancy to current,
+    slightly optimized version.
+
+ -- Proxmox Support Team <support@proxmox.com>  Tue, 06 Jun 2023 16:34:50 +0200
+
+pve-qemu-kvm (8.0.0-1) bookworm; urgency=medium
+
+  * update to QEMU stable release 8.0.0
+
+  * re-build for Proxmox VE 8 / Debian 12 Bookworm
+
+  * adapt to the local virtiofsd C variant being dropped, it has been
+    rewritten in Rust and is now hosted in a separate source repository.
+
+ -- Proxmox Support Team <support@proxmox.com>  Mon, 22 May 2023 13:45:49 +0200
+
+pve-qemu-kvm (7.2.0-8) bullseye; urgency=medium
+
+  * backport fix for ACPI CPU hotplug issue with TCG
+
+  * cherry-pick TCG-related stable fixes for 7.2 for users that turned off KVM
+    HW acceleration
+
+ -- Proxmox Support Team <support@proxmox.com>  Fri, 17 Mar 2023 15:47:08 +0100
+
+pve-qemu-kvm (7.2.0-7) bullseye; urgency=medium
+
+  * improve fix for potential deadlock with trim for IDE/SATA and draining
+
+  * backport stable fixes:
+    - hw/nvme: fix missing endian conversions for doorbell buffers
+    - hw/smbios: fix field corruption in type 4 table
+    - virtio-rng-pci: fix transitional migration compat for vectors
+    - hw/timer/hpet: Fix expiration time overflow
+    - vhost/vdpa: stop all svq on device deletion
+    - vhost: avoid a potential use of an uninitialized variable in the call to
+      vhost_svq_poll
+    - chardev/char-socket: set s->listener = NULL in char_socket_finalize to
+      fix a potential crash after live-migration
+    - intel-iommu: fail MAP notifier without caching mode
+    - intel-iommu: fail DEVIOTLB_UNMAP without dt mode
+
+  * fix a regression for when the LSI SCSI controller is used
+
+ -- Proxmox Support Team <support@proxmox.com>  Mon, 13 Mar 2023 17:42:49 +0100
+
+pve-qemu-kvm (7.2.0-6) bullseye; urgency=medium
+
+  * fix 7.2 regression for Linux boot failures with megasas SCSI
+
+  * fix 7.0 regression for a potential deadlock with trim for IDE/SATA and
+    draining
+
+ -- Proxmox Support Team <support@proxmox.com>  Wed, 08 Mar 2023 14:32:17 +0100
+
+pve-qemu-kvm (7.2.0-5) bullseye; urgency=medium
+
+  * fix #4476: savevm-async: avoid looping without progress
+
+  * savevm-async: decrease the boundary for free space for (memory) state left
+    on target from 30 MiB to 100 MiB, improving the heuristic for when to
+    enter the final "pause and sync" stage.
+
+  * QMP backup: use correct error number when getting blockdrive length fails
+
+  * backport fix for some DMA reentrancy issues, better protecting against
+    malicious guests
+
+  * backport fix for iSCSI double free issue leading to crashes
+
+ -- Proxmox Support Team <support@proxmox.com>  Tue, 21 Feb 2023 13:49:43 +0100
+
+pve-qemu-kvm (7.2.0-4) bullseye; urgency=medium
+
+  * backport fix for a 7.2 regression when using VirtIO disk with
+    detect-zeroes=unmap
+
+ -- Proxmox Support Team <support@proxmox.com>  Fri, 27 Jan 2023 09:37:49 +0100
+
+pve-qemu-kvm (7.2.0-3) bullseye; urgency=medium
+
+  * add fix for live-migration with virtio-rng devices, which regressed in
+    QEMU 7.2.0.
+
+ -- Proxmox Support Team <support@proxmox.com>  Thu, 12 Jan 2023 13:13:14 +0100
+
+pve-qemu-kvm (7.2.0-2) bullseye; urgency=medium
+
+  * enable slirp again for now, as in qemu-server, user networking is
+    supported (via CLI/API) when no bridge is set on a virtual NIC
+
+  * cherry-pick stable fixes for 7.2. Two for virtio-mem and one for vIOMMU.
+    Both features are not yet exposed in PVE's qemu-server, but there's work
+    going on to change that.
+
+ -- Proxmox Support Team <support@proxmox.com>  Tue, 10 Jan 2023 15:47:48 +0100
+
+pve-qemu-kvm (7.2.0-1) bullseye; urgency=medium
+
+  * update to QEMU stable release 7.2.0
+
+  * drop 'slirp' networking
+
+ -- Proxmox Support Team <support@proxmox.com>  Fri, 16 Dec 2022 13:18:21 +0100
+
+pve-qemu-kvm (7.1.0-4) bullseye; urgency=medium
+
+  * cherry-pick "block/block-backend: blk_set_enable_write_cache is IO_CODE"
+
+ -- Proxmox Support Team <support@proxmox.com>  Tue, 22 Nov 2022 09:21:06 +0100
+
+pve-qemu-kvm (7.1.0-3) bullseye; urgency=medium
+
+  * init: daemonize: defuse PID file resolve error to a warning at max, fixing
+    some usecases that regressed with 7.1, like tracking start up in our
+    file-restore VM.
+
+ -- Proxmox Support Team <support@proxmox.com>  Fri, 28 Oct 2022 10:27:49 +0200
+
+pve-qemu-kvm (7.1.0-2) bullseye; urgency=medium
+
+  * fix an issue with error handling in async backup code
+
+ -- Proxmox Support Team <support@proxmox.com>  Tue, 18 Oct 2022 15:33:44 +0200
+
+pve-qemu-kvm (7.1.0-1) bullseye; urgency=medium
+
+  * update to QEMU stable release 7.1.0
+
+  * add fix for io_uring_register_ring_fd from upstream
+
+ -- Proxmox Support Team <support@proxmox.com>  Fri, 14 Oct 2022 14:54:09 +0200
+
+pve-qemu-kvm (7.0.0-4) bullseye; urgency=medium
+
+  * add revision to version output
+
+  * PVE Backup: allow passing max-workers performance setting
+
+ -- Proxmox Support Team <support@proxmox.com>  Mon, 10 Oct 2022 11:55:37 +0200
+
+pve-qemu-kvm (7.0.0-3) bullseye; urgency=medium
+
+  * savevm-async: avoid segfault when aborting snapshot creation task
+
+  * savevm-async: set SAVE_STATE_DONE when closing state file was successful
+    allowing one to start a new snapshot task after aborting one.
+
+ -- Proxmox Support Team <support@proxmox.com>  Tue, 30 Aug 2022 12:54:03 +0200
+
+pve-qemu-kvm (7.0.0-2) bullseye; urgency=medium
+
+  * backport "io_uring: fix short read slow path"
+
+  * backport "e1000: set RX descriptor status in a separate operation"
+
+ -- Proxmox Support Team <support@proxmox.com>  Wed, 20 Jul 2022 09:17:07 +0200
+
+pve-qemu-kvm (7.0.0-1) bullseye; urgency=medium
+
+  * update to QEMU stable release 7.0.0
+
+ -- Proxmox Support Team <support@proxmox.com>  Thu, 30 Jun 2022 11:07:37 +0200
+
+pve-qemu-kvm (6.2.0-11) bullseye; urgency=medium
+
+  * add 'namespace' to BlockdevOptionsPbs for live-restore support
+
+  * vma: create: support 64KiB-unaligned input images like to improve backing
+    up some VM templates
+
+  * block: alloc-track: avoid unlikely, but possible premature break
+
+ -- Proxmox Support Team <support@proxmox.com>  Wed, 22 Jun 2022 15:54:54 +0200
+
+pve-qemu-kvm (6.2.0-10) bullseye; urgency=medium
+
+  * fix #4101: fix backup cancellation bug with iothreads
+
+ -- Proxmox Support Team <support@proxmox.com>  Thu, 9 Jun 2022 16:35:51 +0200
+
+pve-qemu-kvm (6.2.0-9) bullseye; urgency=medium
+
+  * fix possible race conditions during cancellation of a PBS backup
+
+ -- Proxmox Support Team <support@proxmox.com>  Wed, 08 Jun 2022 14:03:22 +0200
+
+pve-qemu-kvm (6.2.0-8) bullseye; urgency=medium
+
+  * revert "block/rbd: implement bdrv_co_block_status" to work around
+    performance regression when backing up large RBD disk
+
+ -- Proxmox Support Team <support@proxmox.com>  Thu, 19 May 2022 09:24:45 +0200
+
+pve-qemu-kvm (6.2.0-7) bullseye; urgency=medium
+
+  * Proxmox Backup Server namespace support
+
+ -- Proxmox Support Team <support@proxmox.com>  Thu, 12 May 2022 16:05:56 +0200
+
+pve-qemu-kvm (6.2.0-6) bullseye; urgency=medium
+
+  * block/gluster: correctly set max_pdiscard which is int64_t to avoid
+    triggering assertion
+
+  * ui/vnc.c: Fixed a deadlock bug
+
+  * display/qxl-render: fix race condition in qxl_cursor (CVE-2021-4207) and
+    integer overflow in cursor_alloc (CVE-2021-4206)
+
+ -- Proxmox Support Team <support@proxmox.com>  Wed, 11 May 2022 10:42:53 +0200
+
+pve-qemu-kvm (6.2.0-5) bullseye; urgency=medium
+
+  * vma: allow partial restore by skipping some disk
+
+ -- Proxmox Support Team <support@proxmox.com>  Mon, 25 Apr 2022 10:13:46 +0200
+
+pve-qemu-kvm (6.2.0-4) bullseye; urgency=medium
+
+  * d/control: add libgbm to build dependencies
+
+  * d/control: add suggest dependency-hint for libgl1
+
+  * various stable backports:
+    + virtio-net: fix map leaking on error during receive
+    + memory: Fix incorrect calls of log_global_start/stop
+    + acpi: fix OEM ID/OEM Table ID padding
+    + vhost-vsock: detach the virqueue element in case of error
+    + vhost-user: remove VirtQ notifier restore
+    + vhost-user: fix VirtQ notifier cleanup
+    + virtio: fix the condition for iommu_platform not supported
+
+ -- Proxmox Support Team <support@proxmox.com>  Fri, 22 Apr 2022 11:52:30 +0200
+
+pve-qemu-kvm (6.2.0-3) bullseye; urgency=medium
+
+  *  cherry-pick fix for some manually added ACPI table SLIC entries via the
+     custom args flag.
+
+ -- Proxmox Support Team <support@proxmox.com>  Fri, 15 Apr 2022 09:09:37 +0200
+
+pve-qemu-kvm (6.2.0-2) bullseye; urgency=medium
+
+  * compile in virgl support
+
+  * enable zstd support
+
+  * drop sdl dependency (it was disabled at compile time already)
+
+  * recommend 'numactl'
+
+  * fix an issue with multi-disk backups where chunks would be written
+    multiple times
+
+ -- Proxmox Support Team <support@proxmox.com>  Thu, 03 Mar 2022 12:03:44 +0100
+
+pve-qemu-kvm (6.2.0-1) bullseye; urgency=medium
+
+  * update to QEMU stable release 6.2.0
+
+ -- Proxmox Support Team <support@proxmox.com>  Thu, 17 Feb 2022 06:23:14 +0100
+
+pve-qemu-kvm (6.1.1-2) bullseye; urgency=medium
+
+  * vma: create: register all streams before entering coroutines to avoid that
+    an early stream starts to write already before all got registered.
+
+ -- Proxmox Support Team <support@proxmox.com>  Mon, 14 Feb 2022 15:53:15 +0100
+
+pve-qemu-kvm (6.1.1-1) bullseye; urgency=medium
+
+  * update to 6.1.1 stable release
+
+ -- Proxmox Support Team <support@proxmox.com>  Thu, 13 Jan 2022 10:57:43 +0100
+
 pve-qemu-kvm (6.1.0-3) bullseye; urgency=medium
 
   * fix #3738: cherry-pick "block: introduce max_hw_iov for use in scsi-

debian/compat

@@ -1 +0,0 @@
-10

debian/control

@@ -2,41 +2,43 @@ Source: pve-qemu-kvm
 Section: admin
 Priority: optional
 Maintainer: Proxmox Support Team <support@proxmox.com>
-Build-Depends: autotools-dev,
+Build-Depends: debhelper-compat (= 13),
                check,
-               debhelper (>= 9),
                libacl1-dev,
                libaio-dev,
                libattr1-dev,
                libcap-ng-dev,
                libcurl4-gnutls-dev,
+               libepoxy-dev,
                libfdt-dev,
+               libgbm-dev,
                libglusterfs-dev (>= 5.2-2),
                libgnutls28-dev,
                libiscsi-dev (>= 1.12.0),
-               libjemalloc-dev,
                libjpeg-dev,
                libjson-perl,
                libnuma-dev,
                libpci-dev,
                libpixman-1-dev,
-               libproxmox-backup-qemu0-dev (>= 1.0.3-1),
+               libproxmox-backup-qemu0-dev (>= 1.3.0),
                librbd-dev (>= 0.48),
                libsdl1.2-dev,
                libseccomp-dev,
+               libslirp-dev,
                libspice-protocol-dev (>= 0.12.14~),
                libspice-server-dev (>= 0.14.0~),
                libsystemd-dev,
                liburing-dev,
-               libusb-1.0-0-dev (>= 1.0.17-1),
+               libusb-1.0-0-dev (>= 1.0.17),
                libusbredirparser-dev (>= 0.6-2),
+               libvirglrenderer-dev,
+               libzstd-dev,
                meson,
                python3-minimal,
                python3-sphinx,
                python3-sphinx-rtd-theme,
+               python3-venv,
                quilt,
-               texi2html,
-               texinfo,
                uuid-dev,
                xfslibs-dev,
 Standards-Version: 3.7.2
@@ -45,7 +47,6 @@ Package: pve-qemu-kvm
 Architecture: any
 Depends: ceph-common (>= 0.48),
          iproute2,
-         libaio1,
          libgfapi0 | glusterfs-common (>= 5.6),
          libgfchangelog0 | glusterfs-common (>= 5.6),
          libgfdb0 | glusterfs-common (>= 5.6),
@@ -54,16 +55,15 @@ Depends: ceph-common (>= 0.48),
          libglusterfs-dev | glusterfs-common (>= 5.6),
          libglusterfs0 | glusterfs-common (>= 5.6),
          libiscsi4 (>= 1.12.0) | libiscsi7,
-         libjemalloc2,
          libjpeg62-turbo,
-         libsdl1.2debian,
          libspice-server1 (>= 0.14.0~),
          libusb-1.0-0 (>= 1.0.17-1),
          libusbredirparser1 (>= 0.6-2),
          libuuid1,
-         numactl,
          ${misc:Depends},
          ${shlibs:Depends},
+Recommends: numactl,
+Suggests: libgl1,
 Conflicts: kvm,
            pve-kvm,
            pve-qemu-kvm-2.6.18,
@@ -71,22 +71,17 @@ Conflicts: kvm,
            qemu-kvm,
            qemu-system-arm,
            qemu-system-common,
+           qemu-system-data,
            qemu-system-x86,
            qemu-utils,
-Provides: qemu-system-arm, qemu-system-x86, qemu-utils
+Provides: qemu-system-arm, qemu-system-x86, qemu-utils,
 Replaces: pve-kvm,
           pve-qemu-kvm-2.6.18,
           qemu-system-arm,
           qemu-system-x86,
           qemu-utils,
+Breaks: qemu-server (<= 8.0.6)
 Description: Full virtualization on x86 hardware
  Using KVM, one can run multiple virtual PCs, each running unmodified Linux or
  Windows images. Each virtual machine has private virtualized hardware: a
  network card, disk, graphics adapter, etc.
-
-Package: pve-qemu-kvm-dbg
-Architecture: any
-Section: debug
-Depends: pve-qemu-kvm (= ${binary:Version})
-Description: pve qemu debugging symbols
- This package contains the debugging symbols for pve-qemu-kvm.

debian/copyright

@@ -25,7 +25,7 @@ License:
 
     In particular, the QEMU virtual CPU core library (libqemu.a) is
     released under the GNU Lesser General Public License version 2 or later.
-    On Debian systems, the complete text of the GNU Lesser General Public 
+    On Debian systems, the complete text of the GNU Lesser General Public
     License can be found in the file /usr/share/common-licenses/LGPL.
 
     Some hardware device emulation sources and other QEMU functionality are

debian/parse-machines.pl

@@ -24,4 +24,5 @@ while (<STDIN>) {
 
 die "no QEMU machine types detected from STDIN input" if scalar (@$machines) <= 0;
 
-print to_json($machines, { utf8 => 1 }) or die "$!\n";
+print to_json($machines, { utf8 => 1, canonical => 1 })
+    or die "failed to encode detected machines as JSON - $!\n";

debian/patches/bitmap-mirror/0001-drive-mirror-add-support-for-sync-bitmap-mode-never.patch

@@ -26,19 +26,22 @@ Suggested-by: Ma Haocong <mahaocong@didichuxing.com>
 Signed-off-by: Ma Haocong <mahaocong@didichuxing.com>
 Signed-off-by: John Snow <jsnow@redhat.com>
 Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
+Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
+[FE: rebased for 9.1.2]
+Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
 ---
- block/mirror.c                   | 98 +++++++++++++++++++++++++-------
- blockdev.c                       | 39 ++++++++++++-
- include/block/block_int.h        |  4 +-
- qapi/block-core.json             | 29 ++++++++--
- tests/unit/test-block-iothread.c |  4 +-
- 5 files changed, 145 insertions(+), 29 deletions(-)
+ block/mirror.c                         | 99 ++++++++++++++++++++------
+ blockdev.c                             | 38 +++++++++-
+ include/block/block_int-global-state.h |  4 +-
+ qapi/block-core.json                   | 25 ++++++-
+ tests/unit/test-block-iothread.c       |  4 +-
+ 5 files changed, 142 insertions(+), 28 deletions(-)
 
 diff --git a/block/mirror.c b/block/mirror.c
-index 98fc66eabf..9d73875bd6 100644
+index 61f0a717b7..83a88562c5 100644
 --- a/block/mirror.c
 +++ b/block/mirror.c
-@@ -50,7 +50,7 @@ typedef struct MirrorBlockJob {
+@@ -51,7 +51,7 @@ typedef struct MirrorBlockJob {
      BlockDriverState *to_replace;
      /* Used to block operations on the drive-mirror-replace target */
      Error *replace_blocker;
@@ -47,7 +50,7 @@ index 98fc66eabf..9d73875bd6 100644
      BlockMirrorBackingMode backing_mode;
      /* Whether the target image requires explicit zero-initialization */
      bool zero_target;
-@@ -65,6 +65,8 @@ typedef struct MirrorBlockJob {
+@@ -73,6 +73,8 @@ typedef struct MirrorBlockJob {
      size_t buf_size;
      int64_t bdev_length;
      unsigned long *cow_bitmap;
@@ -56,9 +59,9 @@ index 98fc66eabf..9d73875bd6 100644
      BdrvDirtyBitmap *dirty_bitmap;
      BdrvDirtyBitmapIter *dbi;
      uint8_t *buf;
-@@ -690,7 +692,8 @@ static int mirror_exit_common(Job *job)
-     bdrv_child_refresh_perms(mirror_top_bs, mirror_top_bs->backing,
+@@ -723,7 +725,8 @@ static int mirror_exit_common(Job *job)
                               &error_abort);
+ 
      if (!abort && s->backing_mode == MIRROR_SOURCE_BACKING_CHAIN) {
 -        BlockDriverState *backing = s->is_none_mode ? src : s->base;
 +        BlockDriverState *backing;
@@ -66,7 +69,7 @@ index 98fc66eabf..9d73875bd6 100644
          BlockDriverState *unfiltered_target = bdrv_skip_filters(target_bs);
  
          if (bdrv_cow_bs(unfiltered_target) != backing) {
-@@ -795,6 +798,16 @@ static void mirror_abort(Job *job)
+@@ -824,6 +827,16 @@ static void mirror_abort(Job *job)
      assert(ret == 0);
  }
  
@@ -83,7 +86,7 @@ index 98fc66eabf..9d73875bd6 100644
  static void coroutine_fn mirror_throttle(MirrorBlockJob *s)
  {
      int64_t now = qemu_clock_get_ns(QEMU_CLOCK_REALTIME);
-@@ -976,7 +989,8 @@ static int coroutine_fn mirror_run(Job *job, Error **errp)
+@@ -1020,7 +1033,8 @@ static int coroutine_fn mirror_run(Job *job, Error **errp)
      mirror_free_init(s);
  
      s->last_pause_ns = qemu_clock_get_ns(QEMU_CLOCK_REALTIME);
@@ -93,7 +96,7 @@ index 98fc66eabf..9d73875bd6 100644
          ret = mirror_dirty_init(s);
          if (ret < 0 || job_is_cancelled(&s->common.job)) {
              goto immediate_exit;
-@@ -1209,6 +1223,7 @@ static const BlockJobDriver mirror_job_driver = {
+@@ -1309,6 +1323,7 @@ static const BlockJobDriver mirror_job_driver = {
          .run                    = mirror_run,
          .prepare                = mirror_prepare,
          .abort                  = mirror_abort,
@@ -101,15 +104,15 @@ index 98fc66eabf..9d73875bd6 100644
          .pause                  = mirror_pause,
          .complete               = mirror_complete,
          .cancel                 = mirror_cancel,
-@@ -1225,6 +1240,7 @@ static const BlockJobDriver commit_active_job_driver = {
+@@ -1327,6 +1342,7 @@ static const BlockJobDriver commit_active_job_driver = {
          .run                    = mirror_run,
          .prepare                = mirror_prepare,
          .abort                  = mirror_abort,
 +        .clean                  = mirror_clean,
          .pause                  = mirror_pause,
          .complete               = mirror_complete,
-     },
-@@ -1587,7 +1603,10 @@ static BlockJob *mirror_start_job(
+         .cancel                 = commit_active_cancel,
+@@ -1719,7 +1735,10 @@ static BlockJob *mirror_start_job(
                               BlockCompletionFunc *cb,
                               void *opaque,
                               const BlockJobDriver *driver,
@@ -120,10 +123,10 @@ index 98fc66eabf..9d73875bd6 100644
 +                             BlockDriverState *base,
                               bool auto_complete, const char *filter_node_name,
                               bool is_mirror, MirrorCopyMode copy_mode,
-                              Error **errp)
-@@ -1599,10 +1618,39 @@ static BlockJob *mirror_start_job(
-     uint64_t target_perms, target_shared_perms;
-     int ret;
+                              bool base_ro,
+@@ -1734,10 +1753,39 @@ static BlockJob *mirror_start_job(
+ 
+     GLOBAL_STATE_CODE();
  
 -    if (granularity == 0) {
 -        granularity = bdrv_get_default_bitmap_granularity(target);
@@ -163,7 +166,7 @@ index 98fc66eabf..9d73875bd6 100644
      assert(is_power_of_2(granularity));
  
      if (buf_size < 0) {
-@@ -1740,7 +1788,9 @@ static BlockJob *mirror_start_job(
+@@ -1878,7 +1926,9 @@ static BlockJob *mirror_start_job(
      s->replaces = g_strdup(replaces);
      s->on_source_error = on_source_error;
      s->on_target_error = on_target_error;
@@ -173,10 +176,10 @@ index 98fc66eabf..9d73875bd6 100644
 +    s->bitmap_mode = bitmap_mode;
      s->backing_mode = backing_mode;
      s->zero_target = zero_target;
-     s->copy_mode = copy_mode;
-@@ -1761,6 +1811,18 @@ static BlockJob *mirror_start_job(
-         bdrv_disable_dirty_bitmap(s->dirty_bitmap);
-     }
+     qatomic_set(&s->copy_mode, copy_mode);
+@@ -1904,6 +1954,18 @@ static BlockJob *mirror_start_job(
+      */
+     bdrv_disable_dirty_bitmap(s->dirty_bitmap);
  
 +    if (s->sync_bitmap) {
 +        bdrv_dirty_bitmap_set_busy(s->sync_bitmap, true);
@@ -190,10 +193,10 @@ index 98fc66eabf..9d73875bd6 100644
 +        }
 +    }
 +
+     bdrv_graph_wrlock();
      ret = block_job_add_bdrv(&s->common, "source", bs, 0,
                               BLK_PERM_WRITE_UNCHANGED | BLK_PERM_WRITE |
-                              BLK_PERM_CONSISTENT_READ,
-@@ -1838,6 +1900,9 @@ fail:
+@@ -1986,6 +2048,9 @@ fail:
          if (s->dirty_bitmap) {
              bdrv_release_dirty_bitmap(s->dirty_bitmap);
          }
@@ -203,7 +206,7 @@ index 98fc66eabf..9d73875bd6 100644
          job_early_fail(&s->common.job);
      }
  
-@@ -1855,29 +1920,23 @@ void mirror_start(const char *job_id, BlockDriverState *bs,
+@@ -2008,35 +2073,28 @@ void mirror_start(const char *job_id, BlockDriverState *bs,
                    BlockDriverState *target, const char *replaces,
                    int creation_flags, int64_t speed,
                    uint32_t granularity, int64_t buf_size,
@@ -220,25 +223,31 @@ index 98fc66eabf..9d73875bd6 100644
 -    bool is_none_mode;
      BlockDriverState *base;
  
+     GLOBAL_STATE_CODE();
+ 
 -    if ((mode == MIRROR_SYNC_MODE_INCREMENTAL) ||
 -        (mode == MIRROR_SYNC_MODE_BITMAP)) {
 -        error_setg(errp, "Sync mode '%s' not supported",
 -                   MirrorSyncMode_str(mode));
 -        return;
 -    }
+-
+     bdrv_graph_rdlock_main_loop();
 -    is_none_mode = mode == MIRROR_SYNC_MODE_NONE;
      base = mode == MIRROR_SYNC_MODE_TOP ? bdrv_backing_chain_next(bs) : NULL;
+     bdrv_graph_rdunlock_main_loop();
+ 
      mirror_start_job(job_id, bs, creation_flags, target, replaces,
                       speed, granularity, buf_size, backing_mode, zero_target,
                       on_source_error, on_target_error, unmap, NULL, NULL,
 -                     &mirror_job_driver, is_none_mode, base, false,
--                     filter_node_name, true, copy_mode, errp);
+-                     filter_node_name, true, copy_mode, false, errp);
 +                     &mirror_job_driver, mode, bitmap, bitmap_mode, base,
-+                     false, filter_node_name, true, copy_mode, errp);
++                     false, filter_node_name, true, copy_mode, false, errp);
  }
  
  BlockJob *commit_active_start(const char *job_id, BlockDriverState *bs,
-@@ -1902,7 +1961,8 @@ BlockJob *commit_active_start(const char *job_id, BlockDriverState *bs,
+@@ -2063,7 +2121,8 @@ BlockJob *commit_active_start(const char *job_id, BlockDriverState *bs,
                       job_id, bs, creation_flags, base, NULL, speed, 0, 0,
                       MIRROR_LEAVE_BACKING_CHAIN, false,
                       on_error, on_error, true, cb, opaque,
@@ -246,36 +255,35 @@ index 98fc66eabf..9d73875bd6 100644
 +                     &commit_active_job_driver, MIRROR_SYNC_MODE_FULL,
 +                     NULL, 0, base, auto_complete,
                       filter_node_name, false, MIRROR_COPY_MODE_BACKGROUND,
-                      errp);
+                      base_read_only, errp);
      if (!job) {
 diff --git a/blockdev.c b/blockdev.c
-index 3d8ac368a1..03e99264dc 100644
+index 835064ed03..9b10e3917c 100644
 --- a/blockdev.c
 +++ b/blockdev.c
-@@ -2957,6 +2957,10 @@ static void blockdev_mirror_common(const char *job_id, BlockDriverState *bs,
+@@ -2778,6 +2778,9 @@ static void blockdev_mirror_common(const char *job_id, BlockDriverState *bs,
                                     BlockDriverState *target,
-                                    bool has_replaces, const char *replaces,
+                                    const char *replaces,
                                     enum MirrorSyncMode sync,
-+                                   bool has_bitmap,
 +                                   const char *bitmap_name,
 +                                   bool has_bitmap_mode,
 +                                   BitmapSyncMode bitmap_mode,
                                     BlockMirrorBackingMode backing_mode,
                                     bool zero_target,
                                     bool has_speed, int64_t speed,
-@@ -2976,6 +2980,7 @@ static void blockdev_mirror_common(const char *job_id, BlockDriverState *bs,
+@@ -2796,6 +2799,7 @@ static void blockdev_mirror_common(const char *job_id, BlockDriverState *bs,
  {
      BlockDriverState *unfiltered_bs;
      int job_flags = JOB_DEFAULT;
 +    BdrvDirtyBitmap *bitmap = NULL;
  
-     if (!has_speed) {
-         speed = 0;
-@@ -3030,6 +3035,29 @@ static void blockdev_mirror_common(const char *job_id, BlockDriverState *bs,
+     GLOBAL_STATE_CODE();
+     GRAPH_RDLOCK_GUARD_MAINLOOP();
+@@ -2850,6 +2854,29 @@ static void blockdev_mirror_common(const char *job_id, BlockDriverState *bs,
          sync = MIRROR_SYNC_MODE_FULL;
      }
  
-+    if (has_bitmap) {
++    if (bitmap_name) {
 +        if (granularity) {
 +            error_setg(errp, "Granularity and bitmap cannot both be set");
 +            return;
@@ -298,53 +306,53 @@ index 3d8ac368a1..03e99264dc 100644
 +        }
 +    }
 +
-     if (!has_replaces) {
+     if (!replaces) {
          /* We want to mirror from @bs, but keep implicit filters on top */
          unfiltered_bs = bdrv_skip_implicit_filters(bs);
-@@ -3076,8 +3104,8 @@ static void blockdev_mirror_common(const char *job_id, BlockDriverState *bs,
+@@ -2891,8 +2918,8 @@ static void blockdev_mirror_common(const char *job_id, BlockDriverState *bs,
       * and will allow to check whether the node still exist at mirror completion
       */
      mirror_start(job_id, bs, target,
--                 has_replaces ? replaces : NULL, job_flags,
+-                 replaces, job_flags,
 -                 speed, granularity, buf_size, sync, backing_mode, zero_target,
-+                 has_replaces ? replaces : NULL, job_flags, speed, granularity,
-+                 buf_size, sync, bitmap, bitmap_mode, backing_mode, zero_target,
++                 replaces, job_flags, speed, granularity, buf_size, sync,
++                 bitmap, bitmap_mode, backing_mode, zero_target,
                   on_source_error, on_target_error, unmap, filter_node_name,
                   copy_mode, errp);
  }
-@@ -3222,6 +3250,8 @@ void qmp_drive_mirror(DriveMirror *arg, Error **errp)
+@@ -3036,6 +3063,8 @@ void qmp_drive_mirror(DriveMirror *arg, Error **errp)
  
-     blockdev_mirror_common(arg->has_job_id ? arg->job_id : NULL, bs, target_bs,
-                            arg->has_replaces, arg->replaces, arg->sync,
-+                           arg->has_bitmap, arg->bitmap,
+     blockdev_mirror_common(arg->job_id, bs, target_bs,
+                            arg->replaces, arg->sync,
++                           arg->bitmap,
 +                           arg->has_bitmap_mode, arg->bitmap_mode,
                             backing_mode, zero_target,
                             arg->has_speed, arg->speed,
                             arg->has_granularity, arg->granularity,
-@@ -3243,6 +3273,8 @@ void qmp_blockdev_mirror(bool has_job_id, const char *job_id,
+@@ -3055,6 +3084,8 @@ void qmp_blockdev_mirror(const char *job_id,
                           const char *device, const char *target,
-                          bool has_replaces, const char *replaces,
+                          const char *replaces,
                           MirrorSyncMode sync,
-+                         bool has_bitmap, const char *bitmap,
++                         const char *bitmap,
 +                         bool has_bitmap_mode, BitmapSyncMode bitmap_mode,
                           bool has_speed, int64_t speed,
                           bool has_granularity, uint32_t granularity,
                           bool has_buf_size, int64_t buf_size,
-@@ -3292,7 +3324,8 @@ void qmp_blockdev_mirror(bool has_job_id, const char *job_id,
+@@ -3095,7 +3126,8 @@ void qmp_blockdev_mirror(const char *job_id,
      }
  
-     blockdev_mirror_common(has_job_id ? job_id : NULL, bs, target_bs,
--                           has_replaces, replaces, sync, backing_mode,
-+                           has_replaces, replaces, sync, has_bitmap,
+     blockdev_mirror_common(job_id, bs, target_bs,
+-                           replaces, sync, backing_mode,
++                           replaces, sync,
 +                           bitmap, has_bitmap_mode, bitmap_mode, backing_mode,
                             zero_target, has_speed, speed,
                             has_granularity, granularity,
                             has_buf_size, buf_size,
-diff --git a/include/block/block_int.h b/include/block/block_int.h
-index f1a54db0f8..3e625a4261 100644
---- a/include/block/block_int.h
-+++ b/include/block/block_int.h
-@@ -1247,7 +1247,9 @@ void mirror_start(const char *job_id, BlockDriverState *bs,
+diff --git a/include/block/block_int-global-state.h b/include/block/block_int-global-state.h
+index eb2d92a226..f0c642b194 100644
+--- a/include/block/block_int-global-state.h
++++ b/include/block/block_int-global-state.h
+@@ -158,7 +158,9 @@ void mirror_start(const char *job_id, BlockDriverState *bs,
                    BlockDriverState *target, const char *replaces,
                    int creation_flags, int64_t speed,
                    uint32_t granularity, int64_t buf_size,
@@ -356,31 +364,26 @@ index f1a54db0f8..3e625a4261 100644
                    BlockdevOnError on_source_error,
                    BlockdevOnError on_target_error,
 diff --git a/qapi/block-core.json b/qapi/block-core.json
-index 675d8265eb..6356a63695 100644
+index aa40d44f1d..c2a337cc04 100644
 --- a/qapi/block-core.json
 +++ b/qapi/block-core.json
-@@ -1938,10 +1938,19 @@
- #        (all the disk, only the sectors allocated in the topmost image, or
- #        only new I/O).
+@@ -2174,6 +2174,15 @@
+ #     destination (all the disk, only the sectors allocated in the
+ #     topmost image, or only new I/O).
  #
-+# @bitmap: The name of a bitmap to use for sync=bitmap mode. This argument must
-+#          be present for bitmap mode and absent otherwise. The bitmap's
-+#          granularity is used instead of @granularity (since 4.1).
++# @bitmap: The name of a bitmap to use for sync=bitmap mode. This
++#     argument must be present for bitmap mode and absent otherwise.
++#     The bitmap's granularity is used instead of @granularity (Since
++#     4.1).
 +#
-+# @bitmap-mode: Specifies the type of data the bitmap should contain after
-+#               the operation concludes. Must be present if sync is "bitmap".
-+#               Must NOT be present otherwise. (Since 4.1)
++# @bitmap-mode: Specifies the type of data the bitmap should contain
++#     after the operation concludes. Must be present if sync is
++#     "bitmap". Must NOT be present otherwise. (Since 4.1)
 +#
- # @granularity: granularity of the dirty bitmap, default is 64K
- #               if the image format doesn't have clusters, 4K if the clusters
- #               are smaller than that, else the cluster size.  Must be a
--#               power of 2 between 512 and 64M (since 1.4).
-+#               power of 2 between 512 and 64M. Must not be specified if
-+#               @bitmap is present (since 1.4).
- #
- # @buf-size: maximum amount of data in flight from source to
- #            target (since 1.4).
-@@ -1979,7 +1988,9 @@
+ # @granularity: granularity of the dirty bitmap, default is 64K if the
+ #     image format doesn't have clusters, 4K if the clusters are
+ #     smaller than that, else the cluster size.  Must be a power of 2
+@@ -2216,7 +2225,9 @@
  { 'struct': 'DriveMirror',
    'data': { '*job-id': 'str', 'device': 'str', 'target': 'str',
              '*format': 'str', '*node-name': 'str', '*replaces': 'str',
@@ -391,28 +394,23 @@ index 675d8265eb..6356a63695 100644
              '*speed': 'int', '*granularity': 'uint32',
              '*buf-size': 'int', '*on-source-error': 'BlockdevOnError',
              '*on-target-error': 'BlockdevOnError',
-@@ -2247,10 +2258,19 @@
- #        (all the disk, only the sectors allocated in the topmost image, or
- #        only new I/O).
+@@ -2496,6 +2507,15 @@
+ #     destination (all the disk, only the sectors allocated in the
+ #     topmost image, or only new I/O).
  #
-+# @bitmap: The name of a bitmap to use for sync=bitmap mode. This argument must
-+#          be present for bitmap mode and absent otherwise. The bitmap's
-+#          granularity is used instead of @granularity (since 4.1).
++# @bitmap: The name of a bitmap to use for sync=bitmap mode. This
++#     argument must be present for bitmap mode and absent otherwise.
++#     The bitmap's granularity is used instead of @granularity (since
++#     4.1).
 +#
-+# @bitmap-mode: Specifies the type of data the bitmap should contain after
-+#               the operation concludes. Must be present if sync is "bitmap".
-+#               Must NOT be present otherwise. (Since 4.1)
++# @bitmap-mode: Specifies the type of data the bitmap should contain
++#     after the operation concludes. Must be present if sync is
++#     "bitmap". Must NOT be present otherwise. (Since 4.1)
 +#
- # @granularity: granularity of the dirty bitmap, default is 64K
- #               if the image format doesn't have clusters, 4K if the clusters
- #               are smaller than that, else the cluster size.  Must be a
--#               power of 2 between 512 and 64M
-+#               power of 2 between 512 and 64M . Must not be specified if
-+#               @bitmap is present.
- #
- # @buf-size: maximum amount of data in flight from source to
- #            target
-@@ -2299,7 +2319,8 @@
+ # @granularity: granularity of the dirty bitmap, default is 64K if the
+ #     image format doesn't have clusters, 4K if the clusters are
+ #     smaller than that, else the cluster size.  Must be a power of 2
+@@ -2544,7 +2564,8 @@
  { 'command': 'blockdev-mirror',
    'data': { '*job-id': 'str', 'device': 'str', 'target': 'str',
              '*replaces': 'str',
@@ -423,10 +421,10 @@ index 675d8265eb..6356a63695 100644
              '*buf-size': 'int', '*on-source-error': 'BlockdevOnError',
              '*on-target-error': 'BlockdevOnError',
 diff --git a/tests/unit/test-block-iothread.c b/tests/unit/test-block-iothread.c
-index c39e70b2f5..470ef79ae0 100644
+index 3766d5de6b..afa44cbd34 100644
 --- a/tests/unit/test-block-iothread.c
 +++ b/tests/unit/test-block-iothread.c
-@@ -617,8 +617,8 @@ static void test_propagate_mirror(void)
+@@ -755,8 +755,8 @@ static void test_propagate_mirror(void)
  
      /* Start a mirror job */
      mirror_start("job0", src, target, NULL, JOB_DEFAULT, 0, 0, 0,
@@ -436,4 +434,4 @@ index c39e70b2f5..470ef79ae0 100644
 +                 false, BLOCKDEV_ON_ERROR_REPORT, BLOCKDEV_ON_ERROR_REPORT,
                   false, "filter_node", MIRROR_COPY_MODE_BACKGROUND,
                   &error_abort);
-     job = job_get("job0");
+ 

debian/patches/bitmap-mirror/0002-drive-mirror-add-support-for-conditional-and-always-.patch

@@ -18,15 +18,16 @@ incremental backup modes; we can use this bitmap to later refresh a
 successfully created mirror.
 
 Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
+Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
 ---
  block/mirror.c | 24 ++++++++++++++++++------
  1 file changed, 18 insertions(+), 6 deletions(-)
 
 diff --git a/block/mirror.c b/block/mirror.c
-index 9d73875bd6..8148df1f80 100644
+index 83a88562c5..fc439ea936 100644
 --- a/block/mirror.c
 +++ b/block/mirror.c
-@@ -667,8 +667,6 @@ static int mirror_exit_common(Job *job)
+@@ -694,8 +694,6 @@ static int mirror_exit_common(Job *job)
          bdrv_unfreeze_backing_chain(mirror_top_bs, target_bs);
      }
  
@@ -35,9 +36,9 @@ index 9d73875bd6..8148df1f80 100644
      /* Make sure that the source BDS doesn't go away during bdrv_replace_node,
       * before we can call bdrv_drained_end */
      bdrv_ref(src);
-@@ -776,6 +774,18 @@ static int mirror_exit_common(Job *job)
-     blk_set_perm(bjob->blk, 0, BLK_PERM_ALL, &error_abort);
-     blk_insert_bs(bjob->blk, mirror_top_bs, &error_abort);
+@@ -805,6 +803,18 @@ static int mirror_exit_common(Job *job)
+     bdrv_drained_end(target_bs);
+     bdrv_unref(target_bs);
  
 +    if (s->sync_bitmap) {
 +        if (s->bitmap_mode == BITMAP_SYNC_MODE_ALWAYS ||
@@ -54,7 +55,7 @@ index 9d73875bd6..8148df1f80 100644
      bs_opaque->job = NULL;
  
      bdrv_drained_end(src);
-@@ -1628,10 +1638,6 @@ static BlockJob *mirror_start_job(
+@@ -1763,10 +1773,6 @@ static BlockJob *mirror_start_job(
                         " sync mode",
                         MirrorSyncMode_str(sync_mode));
              return NULL;
@@ -65,7 +66,7 @@ index 9d73875bd6..8148df1f80 100644
          }
      } else if (bitmap) {
          error_setg(errp,
-@@ -1648,6 +1654,12 @@ static BlockJob *mirror_start_job(
+@@ -1783,6 +1789,12 @@ static BlockJob *mirror_start_job(
              return NULL;
          }
          granularity = bdrv_dirty_bitmap_granularity(bitmap);

debian/patches/bitmap-mirror/0003-mirror-add-check-for-bitmap-mode-without-bitmap.patch

@@ -10,15 +10,16 @@ as one without the other does not make much sense with the current set
 of modes.
 
 Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
+Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
 ---
  blockdev.c | 3 +++
  1 file changed, 3 insertions(+)
 
 diff --git a/blockdev.c b/blockdev.c
-index 03e99264dc..9e14feec87 100644
+index 9b10e3917c..c3fa897289 100644
 --- a/blockdev.c
 +++ b/blockdev.c
-@@ -3056,6 +3056,9 @@ static void blockdev_mirror_common(const char *job_id, BlockDriverState *bs,
+@@ -2875,6 +2875,9 @@ static void blockdev_mirror_common(const char *job_id, BlockDriverState *bs,
          if (bdrv_dirty_bitmap_check(bitmap, BDRV_BITMAP_ALLOW_RO, errp)) {
              return;
          }
@@ -27,4 +28,4 @@ index 03e99264dc..9e14feec87 100644
 +        return;
      }
  
-     if (!has_replaces) {
+     if (!replaces) {

debian/patches/bitmap-mirror/0004-mirror-switch-to-bdrv_dirty_bitmap_merge_internal.patch

@@ -10,15 +10,16 @@ since sync_bitmap is busy at the point of merging, and we checked access
 beforehand.
 
 Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
+Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
 ---
  block/mirror.c | 11 ++++-------
  1 file changed, 4 insertions(+), 7 deletions(-)
 
 diff --git a/block/mirror.c b/block/mirror.c
-index 8148df1f80..46e3d0860b 100644
+index fc439ea936..cde5d710fd 100644
 --- a/block/mirror.c
 +++ b/block/mirror.c
-@@ -780,8 +780,8 @@ static int mirror_exit_common(Job *job)
+@@ -809,8 +809,8 @@ static int mirror_exit_common(Job *job)
               job->ret == 0 && ret == 0)) {
              /* Success; synchronize copy back to sync. */
              bdrv_clear_dirty_bitmap(s->sync_bitmap, NULL);
@@ -29,7 +30,7 @@ index 8148df1f80..46e3d0860b 100644
          }
      }
      bdrv_release_dirty_bitmap(s->dirty_bitmap);
-@@ -1828,11 +1828,8 @@ static BlockJob *mirror_start_job(
+@@ -1971,11 +1971,8 @@ static BlockJob *mirror_start_job(
      }
  
      if (s->sync_mode == MIRROR_SYNC_MODE_BITMAP) {
@@ -42,4 +43,4 @@ index 8148df1f80..46e3d0860b 100644
 +                                         NULL, true);
      }
  
-     ret = block_job_add_bdrv(&s->common, "source", bs, 0,
+     bdrv_graph_wrlock();

debian/patches/bitmap-mirror/0005-iotests-add-test-for-bitmap-mirror.patch

@@ -20,6 +20,7 @@ intentionally keeping copyright and ownership of original test case to
 honor provenance.
 
 Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
+Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
 ---
  tests/qemu-iotests/384     |  547 +++++++
  tests/qemu-iotests/384.out | 2846 ++++++++++++++++++++++++++++++++++++

debian/patches/bitmap-mirror/0006-mirror-move-some-checks-to-qmp.patch

@@ -11,6 +11,9 @@ mode was never available for drive-mirror, it makes the interface more
 uniform w.r.t. backup block jobs.
 
 Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
+Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
+[FE: rebase for 8.2.2]
+Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
 ---
  block/mirror.c             | 28 +++------------
  blockdev.c                 | 29 +++++++++++++++
@@ -18,12 +21,12 @@ Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
  3 files changed, 70 insertions(+), 59 deletions(-)
 
 diff --git a/block/mirror.c b/block/mirror.c
-index 46e3d0860b..33477ade1b 100644
+index cde5d710fd..e20f50e5fb 100644
 --- a/block/mirror.c
 +++ b/block/mirror.c
-@@ -1628,31 +1628,13 @@ static BlockJob *mirror_start_job(
-     uint64_t target_perms, target_shared_perms;
-     int ret;
+@@ -1763,31 +1763,13 @@ static BlockJob *mirror_start_job(
+ 
+     GLOBAL_STATE_CODE();
  
 -    if (sync_mode == MIRROR_SYNC_MODE_INCREMENTAL) {
 -        error_setg(errp, "Sync mode '%s' not supported",
@@ -59,17 +62,17 @@ index 46e3d0860b..33477ade1b 100644
  
          if (bitmap_mode != BITMAP_SYNC_MODE_NEVER) {
 diff --git a/blockdev.c b/blockdev.c
-index 9e14feec87..b6f797b41f 100644
+index c3fa897289..9cbd166674 100644
 --- a/blockdev.c
 +++ b/blockdev.c
-@@ -3035,7 +3035,36 @@ static void blockdev_mirror_common(const char *job_id, BlockDriverState *bs,
+@@ -2854,7 +2854,36 @@ static void blockdev_mirror_common(const char *job_id, BlockDriverState *bs,
          sync = MIRROR_SYNC_MODE_FULL;
      }
  
 +    if ((sync == MIRROR_SYNC_MODE_BITMAP) ||
 +        (sync == MIRROR_SYNC_MODE_INCREMENTAL)) {
 +        /* done before desugaring 'incremental' to print the right message */
-+        if (!has_bitmap) {
++        if (!bitmap_name) {
 +            error_setg(errp, "Must provide a valid bitmap name for "
 +                       "'%s' sync mode", MirrorSyncMode_str(sync));
 +            return;
@@ -90,7 +93,7 @@ index 9e14feec87..b6f797b41f 100644
 +        bitmap_mode = BITMAP_SYNC_MODE_ON_SUCCESS;
 +    }
 +
-     if (has_bitmap) {
+     if (bitmap_name) {
 +        if (sync != MIRROR_SYNC_MODE_BITMAP) {
 +            error_setg(errp, "Sync mode '%s' not supported with bitmap.",
 +                       MirrorSyncMode_str(sync));

debian/patches/extra/0001-monitor-qmp-fix-race-with-clients-disconnecting-earl.patch

@@ -37,6 +37,7 @@ looping to open a connection, send the greeting, then exiting no longer
 crashes other, normally behaving clients with unrelated responses.
 
 Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
+Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
 ---
  include/monitor/monitor.h  |  1 +
  monitor/monitor-internal.h |  7 +++++++
@@ -47,7 +48,7 @@ Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
  6 files changed, 59 insertions(+), 5 deletions(-)
 
 diff --git a/include/monitor/monitor.h b/include/monitor/monitor.h
-index 1a8a369b50..2c8a558c67 100644
+index c3740ec616..7f38ce6b8b 100644
 --- a/include/monitor/monitor.h
 +++ b/include/monitor/monitor.h
 @@ -16,6 +16,7 @@ extern QemuOptsList qemu_mon_opts;
@@ -59,10 +60,10 @@ index 1a8a369b50..2c8a558c67 100644
  void monitor_init_globals(void);
  void monitor_init_globals_core(void);
 diff --git a/monitor/monitor-internal.h b/monitor/monitor-internal.h
-index 9c3a09cb01..a92be8c3f7 100644
+index cb628f681d..93dbd62fc2 100644
 --- a/monitor/monitor-internal.h
 +++ b/monitor/monitor-internal.h
-@@ -144,6 +144,13 @@ typedef struct {
+@@ -151,6 +151,13 @@ typedef struct {
      QemuMutex qmp_queue_lock;
      /* Input queue that holds all the parsed QMP requests */
      GQueue *qmp_requests;
@@ -77,10 +78,10 @@ index 9c3a09cb01..a92be8c3f7 100644
  
  /**
 diff --git a/monitor/monitor.c b/monitor/monitor.c
-index 46a171bca6..5ccdd2424b 100644
+index db52a9c7ef..2d63959351 100644
 --- a/monitor/monitor.c
 +++ b/monitor/monitor.c
-@@ -135,6 +135,21 @@ bool monitor_cur_is_qmp(void)
+@@ -116,6 +116,21 @@ bool monitor_cur_is_qmp(void)
      return cur_mon && monitor_is_qmp(cur_mon);
  }
  
@@ -103,10 +104,10 @@ index 46a171bca6..5ccdd2424b 100644
   * Is @mon is using readline?
   * Note: not all HMP monitors use readline, e.g., gdbserver has a
 diff --git a/monitor/qmp.c b/monitor/qmp.c
-index 092c527b6f..6b8cfcf6d8 100644
+index 5e538f34c0..eb181d5979 100644
 --- a/monitor/qmp.c
 +++ b/monitor/qmp.c
-@@ -141,6 +141,8 @@ static void monitor_qmp_dispatch(MonitorQMP *mon, QObject *req)
+@@ -165,6 +165,8 @@ static void monitor_qmp_dispatch(MonitorQMP *mon, QObject *req)
      QDict *rsp;
      QDict *error;
  
@@ -115,7 +116,7 @@ index 092c527b6f..6b8cfcf6d8 100644
      rsp = qmp_dispatch(mon->commands, req, qmp_oob_enabled(mon),
                         &mon->common);
  
-@@ -156,7 +158,17 @@ static void monitor_qmp_dispatch(MonitorQMP *mon, QObject *req)
+@@ -180,7 +182,17 @@ static void monitor_qmp_dispatch(MonitorQMP *mon, QObject *req)
          }
      }
  
@@ -134,7 +135,7 @@ index 092c527b6f..6b8cfcf6d8 100644
      qobject_unref(rsp);
  }
  
-@@ -444,6 +456,7 @@ static void monitor_qmp_event(void *opaque, QEMUChrEvent event)
+@@ -461,6 +473,7 @@ static void monitor_qmp_event(void *opaque, QEMUChrEvent event)
  
      switch (event) {
      case CHR_EVENT_OPENED:
@@ -143,10 +144,10 @@ index 092c527b6f..6b8cfcf6d8 100644
          monitor_qmp_caps_reset(mon);
          data = qmp_greeting(mon);
 diff --git a/qapi/qmp-dispatch.c b/qapi/qmp-dispatch.c
-index 59600210ce..95602446eb 100644
+index 176b549473..790bb7d1da 100644
 --- a/qapi/qmp-dispatch.c
 +++ b/qapi/qmp-dispatch.c
-@@ -120,16 +120,28 @@ typedef struct QmpDispatchBH {
+@@ -117,16 +117,28 @@ typedef struct QmpDispatchBH {
      QObject **ret;
      Error **errp;
      Coroutine *co;
@@ -179,19 +180,19 @@ index 59600210ce..95602446eb 100644
      aio_co_wake(data->co);
  }
  
-@@ -243,6 +255,7 @@ QDict *qmp_dispatch(const QmpCommandList *cmds, QObject *request,
+@@ -253,6 +265,7 @@ QDict *coroutine_mixed_fn qmp_dispatch(const QmpCommandList *cmds, QObject *requ
              .ret        = &ret,
              .errp       = &err,
              .co         = qemu_coroutine_self(),
 +            .conn_nr    = monitor_get_connection_nr(cur_mon),
          };
-         aio_bh_schedule_oneshot(qemu_get_aio_context(), do_qmp_dispatch_bh,
+         aio_bh_schedule_oneshot(iohandler_get_aio_context(), do_qmp_dispatch_bh,
                                  &data);
 diff --git a/stubs/monitor-core.c b/stubs/monitor-core.c
-index d058a2a00d..3290b58120 100644
+index 1894cdfe1f..d74d0459f0 100644
 --- a/stubs/monitor-core.c
 +++ b/stubs/monitor-core.c
-@@ -13,6 +13,11 @@ Monitor *monitor_set_cur(Coroutine *co, Monitor *mon)
+@@ -12,6 +12,11 @@ Monitor *monitor_set_cur(Coroutine *co, Monitor *mon)
      return NULL;
  }
  
@@ -200,6 +201,6 @@ index d058a2a00d..3290b58120 100644
 +    return -1;
 +}
 +
- void monitor_init_qmp(Chardev *chr, bool pretty, Error **errp)
+ void qapi_event_emit(QAPIEvent event, QDict *qdict)
  {
  }

debian/patches/extra/0001-qemu-sockets-fix-unix-socket-path-copy-again.patch

@@ -1,81 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Michael Tokarev <mjt@tls.msk.ru>
-Date: Wed, 1 Sep 2021 16:16:24 +0300
-Subject: [PATCH] qemu-sockets: fix unix socket path copy (again)
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Commit 4cfd970ec188558daa6214f26203fe553fb1e01f added an
-assert which ensures the path within an address of a unix
-socket returned from the kernel is at least one byte and
-does not exceed sun_path buffer. Both of this constraints
-are wrong:
-
-A unix socket can be unnamed, in this case the path is
-completely empty (not even \0)
-
-And some implementations (notable linux) can add extra
-trailing byte (\0) _after_ the sun_path buffer if we
-passed buffer larger than it (and we do).
-
-So remove the assertion (since it causes real-life breakage)
-but at the same time fix the usage of sun_path. Namely,
-we should not access sun_path[0] if kernel did not return
-it at all (this is the case for unnamed sockets),
-and use the returned salen when copyig actual path as an
-upper constraint for the amount of bytes to copy - this
-will ensure we wont exceed the information provided by
-the kernel, regardless whenever there is a trailing \0
-or not. This also helps with unnamed sockets.
-
-Note the case of abstract socket, the sun_path is actually
-a blob and can contain \0 characters, - it should not be
-passed to g_strndup and the like, it should be accessed by
-memcpy-like functions.
-
-Fixes: 4cfd970ec188558daa6214f26203fe553fb1e01f
-Fixes: http://bugs.debian.org/993145
-Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
-Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
-Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
-CC: qemu-stable@nongnu.org
----
- util/qemu-sockets.c | 13 +++++--------
- 1 file changed, 5 insertions(+), 8 deletions(-)
-
-diff --git a/util/qemu-sockets.c b/util/qemu-sockets.c
-index f2f3676d1f..c5043999e9 100644
---- a/util/qemu-sockets.c
-+++ b/util/qemu-sockets.c
-@@ -1345,25 +1345,22 @@ socket_sockaddr_to_address_unix(struct sockaddr_storage *sa,
-     SocketAddress *addr;
-     struct sockaddr_un *su = (struct sockaddr_un *)sa;
- 
--    assert(salen >= sizeof(su->sun_family) + 1 &&
--           salen <= sizeof(struct sockaddr_un));
--
-     addr = g_new0(SocketAddress, 1);
-     addr->type = SOCKET_ADDRESS_TYPE_UNIX;
-+    salen -= offsetof(struct sockaddr_un, sun_path);
- #ifdef CONFIG_LINUX
--    if (!su->sun_path[0]) {
-+    if (salen > 0 && !su->sun_path[0]) {
-         /* Linux abstract socket */
--        addr->u.q_unix.path = g_strndup(su->sun_path + 1,
--                                        salen - sizeof(su->sun_family) - 1);
-+        addr->u.q_unix.path = g_strndup(su->sun_path + 1, salen - 1);
-         addr->u.q_unix.has_abstract = true;
-         addr->u.q_unix.abstract = true;
-         addr->u.q_unix.has_tight = true;
--        addr->u.q_unix.tight = salen < sizeof(*su);
-+        addr->u.q_unix.tight = salen < sizeof(su->sun_path);
-         return addr;
-     }
- #endif
- 
--    addr->u.q_unix.path = g_strndup(su->sun_path, sizeof(su->sun_path));
-+    addr->u.q_unix.path = g_strndup(su->sun_path, salen);
-     return addr;
- }
- #endif /* WIN32 */

debian/patches/extra/0002-scsi-megasas-Internal-cdbs-have-16-byte-length.patch

@@ -0,0 +1,69 @@
+From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
+From: Guenter Roeck <linux@roeck-us.net>
+Date: Tue, 28 Feb 2023 09:11:29 -0800
+Subject: [PATCH] scsi: megasas: Internal cdbs have 16-byte length
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Host drivers do not necessarily set cdb_len in megasas io commands.
+With commits 6d1511cea0 ("scsi: Reject commands if the CDB length
+exceeds buf_len") and fe9d8927e2 ("scsi: Add buf_len parameter to
+scsi_req_new()"), this results in failures to boot Linux from affected
+SCSI drives because cdb_len is set to 0 by the host driver.
+Set the cdb length to its actual size to solve the problem.
+
+Signed-off-by: Guenter Roeck <linux@roeck-us.net>
+Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
+(picked-up from https://lists.nongnu.org/archive/html/qemu-devel/2023-02/msg08653.html)
+Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
+---
+ hw/scsi/megasas.c | 14 ++------------
+ 1 file changed, 2 insertions(+), 12 deletions(-)
+
+diff --git a/hw/scsi/megasas.c b/hw/scsi/megasas.c
+index 2d0c607177..97e51733af 100644
+--- a/hw/scsi/megasas.c
++++ b/hw/scsi/megasas.c
+@@ -1781,7 +1781,7 @@ static int megasas_handle_io(MegasasState *s, MegasasCmd *cmd, int frame_cmd)
+     uint8_t cdb[16];
+     int len;
+     struct SCSIDevice *sdev = NULL;
+-    int target_id, lun_id, cdb_len;
++    int target_id, lun_id;
+ 
+     lba_count = le32_to_cpu(cmd->frame->io.header.data_len);
+     lba_start_lo = le32_to_cpu(cmd->frame->io.lba_lo);
+@@ -1790,7 +1790,6 @@ static int megasas_handle_io(MegasasState *s, MegasasCmd *cmd, int frame_cmd)
+ 
+     target_id = cmd->frame->header.target_id;
+     lun_id = cmd->frame->header.lun_id;
+-    cdb_len = cmd->frame->header.cdb_len;
+ 
+     if (target_id < MFI_MAX_LD && lun_id == 0) {
+         sdev = scsi_device_find(&s->bus, 0, target_id, lun_id);
+@@ -1805,15 +1804,6 @@ static int megasas_handle_io(MegasasState *s, MegasasCmd *cmd, int frame_cmd)
+         return MFI_STAT_DEVICE_NOT_FOUND;
+     }
+ 
+-    if (cdb_len > 16) {
+-        trace_megasas_scsi_invalid_cdb_len(
+-            mfi_frame_desc(frame_cmd), 1, target_id, lun_id, cdb_len);
+-        megasas_write_sense(cmd, SENSE_CODE(INVALID_OPCODE));
+-        cmd->frame->header.scsi_status = CHECK_CONDITION;
+-        s->event_count++;
+-        return MFI_STAT_SCSI_DONE_WITH_ERROR;
+-    }
+-
+     cmd->iov_size = lba_count * sdev->blocksize;
+     if (megasas_map_sgl(s, cmd, &cmd->frame->io.sgl)) {
+         megasas_write_sense(cmd, SENSE_CODE(TARGET_FAILURE));
+@@ -1824,7 +1814,7 @@ static int megasas_handle_io(MegasasState *s, MegasasCmd *cmd, int frame_cmd)
+ 
+     megasas_encode_lba(cdb, lba_start, lba_count, is_write);
+     cmd->req = scsi_req_new(sdev, cmd->index,
+-                            lun_id, cdb, cdb_len, cmd);
++                            lun_id, cdb, sizeof(cdb), cmd);
+     if (!cmd->req) {
+         trace_megasas_scsi_req_alloc_failed(
+             mfi_frame_desc(frame_cmd), target_id, lun_id);

debian/patches/extra/0003-ide-avoid-potential-deadlock-when-draining-during-tr.patch

@@ -0,0 +1,100 @@
+From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
+From: Fiona Ebner <f.ebner@proxmox.com>
+Date: Tue, 7 Mar 2023 15:03:02 +0100
+Subject: [PATCH] ide: avoid potential deadlock when draining during trim
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+The deadlock can happen as follows:
+1. ide_issue_trim is called, and increments the in_flight counter.
+2. ide_issue_trim_cb calls blk_aio_pdiscard.
+3. Somebody else starts draining (e.g. backup to insert the cbw node).
+4. ide_issue_trim_cb is called as the completion callback for
+   blk_aio_pdiscard.
+5. ide_issue_trim_cb issues yet another blk_aio_pdiscard request.
+6. The request is added to the wait queue via blk_wait_while_drained,
+   because draining has been started.
+7. Nobody ever decrements the in_flight counter and draining can't
+   finish. This would be done by ide_trim_bh_cb, which is called after
+   ide_issue_trim_cb has issued its last request, but
+   ide_issue_trim_cb is not called anymore, because it's the
+   completion callback of blk_aio_pdiscard, which waits on draining.
+
+Quoting Hanna Czenczek:
+> The point of 7e5cdb345f was that we need any in-flight count to
+> accompany a set s->bus->dma->aiocb. While blk_aio_pdiscard() is
+> happening, we don’t necessarily need another count. But we do need
+> it while there is no blk_aio_pdiscard().
+> ide_issue_trim_cb() returns in two cases (and, recursively through
+> its callers, leaves s->bus->dma->aiocb set):
+> 1. After calling blk_aio_pdiscard(), which will keep an in-flight
+>    count,
+> 2. After calling replay_bh_schedule_event() (i.e.
+>    qemu_bh_schedule()), which does not keep an in-flight count.
+
+Thus, even after moving the blk_inc_in_flight to above the
+replay_bh_schedule_event call, the invariant "ide_issue_trim_cb
+returns with an accompanying in-flight count" is still satisfied.
+
+However, the issue 7e5cdb345f fixed for canceling resurfaces, because
+ide_cancel_dma_sync assumes that it just needs to drain once. But now
+the in_flight count is not consistently > 0 during the trim operation.
+So, change it to drain until !s->bus->dma->aiocb, which means that the
+operation finished (s->bus->dma->aiocb is cleared by ide_set_inactive
+via the ide_dma_cb when the end of the transfer is reached).
+
+Discussion here:
+https://lists.nongnu.org/archive/html/qemu-devel/2023-03/msg02506.html
+
+Fixes: 7e5cdb345f ("ide: Increment BB in-flight counter for TRIM BH")
+Suggested-by: Hanna Czenczek <hreitz@redhat.com>
+Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
+---
+ hw/ide/core.c | 12 ++++++------
+ 1 file changed, 6 insertions(+), 6 deletions(-)
+
+diff --git a/hw/ide/core.c b/hw/ide/core.c
+index 08d9218455..20d8c0cf66 100644
+--- a/hw/ide/core.c
++++ b/hw/ide/core.c
+@@ -456,7 +456,7 @@ static void ide_trim_bh_cb(void *opaque)
+     iocb->bh = NULL;
+     qemu_aio_unref(iocb);
+ 
+-    /* Paired with an increment in ide_issue_trim() */
++    /* Paired with an increment in ide_issue_trim_cb() */
+     blk_dec_in_flight(blk);
+ }
+ 
+@@ -516,6 +516,8 @@ static void ide_issue_trim_cb(void *opaque, int ret)
+ done:
+     iocb->aiocb = NULL;
+     if (iocb->bh) {
++        /* Paired with a decrement in ide_trim_bh_cb() */
++        blk_inc_in_flight(s->blk);
+         replay_bh_schedule_event(iocb->bh);
+     }
+ }
+@@ -528,9 +530,6 @@ BlockAIOCB *ide_issue_trim(
+     IDEDevice *dev = s->unit ? s->bus->slave : s->bus->master;
+     TrimAIOCB *iocb;
+ 
+-    /* Paired with a decrement in ide_trim_bh_cb() */
+-    blk_inc_in_flight(s->blk);
+-
+     iocb = blk_aio_get(&trim_aiocb_info, s->blk, cb, cb_opaque);
+     iocb->s = s;
+     iocb->bh = qemu_bh_new_guarded(ide_trim_bh_cb, iocb,
+@@ -754,8 +753,9 @@ void ide_cancel_dma_sync(IDEState *s)
+      */
+     if (s->bus->dma->aiocb) {
+         trace_ide_cancel_dma_sync_remaining();
+-        blk_drain(s->blk);
+-        assert(s->bus->dma->aiocb == NULL);
++        while (s->bus->dma->aiocb) {
++            blk_drain(s->blk);
++        }
+     }
+ }
+ 

debian/patches/extra/0003-monitor-hmp-add-support-for-flag-argument-with-value.patch

@@ -1,54 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Stefan Reiter <s.reiter@proxmox.com>
-Date: Wed, 1 Sep 2021 16:51:04 +0200
-Subject: [PATCH] monitor/hmp: add support for flag argument with value
-
-Adds support for the "-xS" parameter type, where "-x" denotes a flag
-name and the "S" suffix indicates that this flag is supposed to take an
-arbitrary string parameter.
-
-These parameters are always optional, the entry in the qdict will be
-omitted if the flag is not given.
-
-Reviewed-by: Eric Blake <eblake@redhat.com>
-Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
----
- monitor/hmp.c | 17 ++++++++++++++++-
- 1 file changed, 16 insertions(+), 1 deletion(-)
-
-diff --git a/monitor/hmp.c b/monitor/hmp.c
-index d50c3124e1..a32dce7a35 100644
---- a/monitor/hmp.c
-+++ b/monitor/hmp.c
-@@ -980,6 +980,7 @@ static QDict *monitor_parse_arguments(Monitor *mon,
-             {
-                 const char *tmp = p;
-                 int skip_key = 0;
-+                int ret;
-                 /* option */
- 
-                 c = *typestr++;
-@@ -1002,8 +1003,22 @@ static QDict *monitor_parse_arguments(Monitor *mon,
-                     }
-                     if (skip_key) {
-                         p = tmp;
-+                    } else if (*typestr == 'S') {
-+                        /* has option with string value */
-+                        typestr++;
-+                        tmp = p++;
-+                        while (qemu_isspace(*p)) {
-+                            p++;
-+                        }
-+                        ret = get_str(buf, sizeof(buf), &p);
-+                        if (ret < 0) {
-+                            monitor_printf(mon, "%s: value expected for -%c\n",
-+                                           cmd->name, *tmp);
-+                            goto fail;
-+                        }
-+                        qdict_put_str(qdict, key, buf);
-                     } else {
--                        /* has option */
-+                        /* has boolean option */
-                         p++;
-                         qdict_put_bool(qdict, key, true);
-                     }

debian/patches/extra/0004-Revert-x86-acpi-workaround-Windows-not-handling-name.patch

@@ -0,0 +1,45 @@
+From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
+From: Fiona Ebner <f.ebner@proxmox.com>
+Date: Fri, 17 Nov 2023 11:18:06 +0100
+Subject: [PATCH] Revert "x86: acpi: workaround Windows not handling name
+ references in Package properly"
+
+This reverts commit 44d975ef340e2f21f236f9520c53e1b30d2213a4.
+
+As reported in the community forum [0] and reproduced locally this
+breaks VirtIO network adapters in (at least) the German ISO of Windows
+Server 2022. The fix itself was for
+
+> Issue is not fatal but as result acpi-index/"PCI Label ID" property
+> is either not shown in device details page or shows incorrect value.
+
+so revert and tolerate that as a stop-gap, rather than have the
+devices not working at all.
+
+[0]: https://forum.proxmox.com/threads/92094/post-605684
+
+Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
+---
+ hw/i386/acpi-build.c | 8 ++------
+ 1 file changed, 2 insertions(+), 6 deletions(-)
+
+diff --git a/hw/i386/acpi-build.c b/hw/i386/acpi-build.c
+index 5d4bd2b710..67194bb705 100644
+--- a/hw/i386/acpi-build.c
++++ b/hw/i386/acpi-build.c
+@@ -346,13 +346,9 @@ Aml *aml_pci_device_dsm(void)
+     {
+         Aml *params = aml_local(0);
+         Aml *pkg = aml_package(2);
+-        aml_append(pkg, aml_int(0));
+-        aml_append(pkg, aml_int(0));
++        aml_append(pkg, aml_name("BSEL"));
++        aml_append(pkg, aml_name("ASUN"));
+         aml_append(method, aml_store(pkg, params));
+-        aml_append(method,
+-            aml_store(aml_name("BSEL"), aml_index(params, aml_int(0))));
+-        aml_append(method,
+-            aml_store(aml_name("ASUN"), aml_index(params, aml_int(1))));
+         aml_append(method,
+             aml_return(aml_call5("PDSM", aml_arg(0), aml_arg(1),
+                                  aml_arg(2), aml_arg(3), params))

debian/patches/extra/0004-monitor-refactor-set-expire_password-and-allow-VNC-d.patch

@@ -1,475 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Stefan Reiter <s.reiter@proxmox.com>
-Date: Wed, 25 Aug 2021 11:14:13 +0200
-Subject: [PATCH] monitor: refactor set/expire_password and allow VNC display
- id
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-It is possible to specify more than one VNC server on the command line,
-either with an explicit ID or the auto-generated ones à la "default",
-"vnc2", "vnc3", ...
-
-It is not possible to change the password on one of these extra VNC
-displays though. Fix this by adding a "display" parameter to the
-"set_password" and "expire_password" QMP and HMP commands.
-
-For HMP, the display is specified using the "-d" value flag.
-
-For QMP, the schema is updated to explicitly express the supported
-variants of the commands with protocol-discriminated unions.
-
-Suggested-by: Eric Blake <eblake@redhat.com>
-Suggested-by: Markus Armbruster <armbru@redhat.com>
-Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
----
- hmp-commands.hx    |  29 ++++----
- monitor/hmp-cmds.c |  57 +++++++++++++++-
- monitor/qmp-cmds.c |  62 ++++++-----------
- qapi/ui.json       | 163 ++++++++++++++++++++++++++++++++++++++-------
- 4 files changed, 232 insertions(+), 79 deletions(-)
-
-diff --git a/hmp-commands.hx b/hmp-commands.hx
-index 8e45bce2cd..d78e4cfc47 100644
---- a/hmp-commands.hx
-+++ b/hmp-commands.hx
-@@ -1514,34 +1514,35 @@ ERST
- 
-     {
-         .name       = "set_password",
--        .args_type  = "protocol:s,password:s,connected:s?",
--        .params     = "protocol password action-if-connected",
-+        .args_type  = "protocol:s,password:s,display:-dS,connected:s?",
-+        .params     = "protocol password [-d display] [action-if-connected]",
-         .help       = "set spice/vnc password",
-         .cmd        = hmp_set_password,
-     },
- 
- SRST
--``set_password [ vnc | spice ] password [ action-if-connected ]``
--  Change spice/vnc password.  Use zero to make the password stay valid
--  forever.  *action-if-connected* specifies what should happen in
--  case a connection is established: *fail* makes the password change
--  fail.  *disconnect* changes the password and disconnects the
--  client.  *keep* changes the password and keeps the connection up.
--  *keep* is the default.
-+``set_password [ vnc | spice ] password [ -d display ] [ action-if-connected ]``
-+  Change spice/vnc password.  *display* can be used with 'vnc' to specify
-+  which display to set the password on.  *action-if-connected* specifies
-+  what should happen in case a connection is established: *fail* makes
-+  the password change fail.  *disconnect* changes the password and
-+  disconnects the client.  *keep* changes the password and keeps the
-+  connection up.  *keep* is the default.
- ERST
- 
-     {
-         .name       = "expire_password",
--        .args_type  = "protocol:s,time:s",
--        .params     = "protocol time",
-+        .args_type  = "protocol:s,time:s,display:-dS",
-+        .params     = "protocol time [-d display]",
-         .help       = "set spice/vnc password expire-time",
-         .cmd        = hmp_expire_password,
-     },
- 
- SRST
--``expire_password [ vnc | spice ]`` *expire-time*
--  Specify when a password for spice/vnc becomes
--  invalid. *expire-time* accepts:
-+``expire_password [ vnc | spice ] expire-time [ -d display ]``
-+  Specify when a password for spice/vnc becomes invalid.
-+  *display* behaves the same as in ``set_password``.
-+  *expire-time* accepts:
- 
-   ``now``
-     Invalidate password instantly.
-diff --git a/monitor/hmp-cmds.c b/monitor/hmp-cmds.c
-index e00255f7ee..047294e1ed 100644
---- a/monitor/hmp-cmds.c
-+++ b/monitor/hmp-cmds.c
-@@ -1451,10 +1451,41 @@ void hmp_set_password(Monitor *mon, const QDict *qdict)
- {
-     const char *protocol  = qdict_get_str(qdict, "protocol");
-     const char *password  = qdict_get_str(qdict, "password");
-+    const char *display = qdict_get_try_str(qdict, "display");
-     const char *connected = qdict_get_try_str(qdict, "connected");
-     Error *err = NULL;
-+    DisplayProtocol proto;
- 
--    qmp_set_password(protocol, password, !!connected, connected, &err);
-+    SetPasswordOptions opts = {
-+        .password = g_strdup(password),
-+        .u.vnc.display = NULL,
-+    };
-+
-+    proto = qapi_enum_parse(&DisplayProtocol_lookup, protocol,
-+                            DISPLAY_PROTOCOL_VNC, &err);
-+    if (err) {
-+        hmp_handle_error(mon, err);
-+        return;
-+    }
-+    opts.protocol = proto;
-+
-+    if (proto == DISPLAY_PROTOCOL_VNC) {
-+        opts.u.vnc.has_display = !!display;
-+        opts.u.vnc.display = g_strdup(display);
-+    } else if (proto == DISPLAY_PROTOCOL_SPICE) {
-+        opts.u.spice.has_connected = !!connected;
-+        opts.u.spice.connected =
-+            qapi_enum_parse(&SetPasswordAction_lookup, connected,
-+                            SET_PASSWORD_ACTION_KEEP, &err);
-+        if (err) {
-+            hmp_handle_error(mon, err);
-+            return;
-+        }
-+    }
-+
-+    qmp_set_password(&opts, &err);
-+    g_free(opts.password);
-+    g_free(opts.u.vnc.display);
-     hmp_handle_error(mon, err);
- }
- 
-@@ -1462,9 +1493,31 @@ void hmp_expire_password(Monitor *mon, const QDict *qdict)
- {
-     const char *protocol  = qdict_get_str(qdict, "protocol");
-     const char *whenstr = qdict_get_str(qdict, "time");
-+    const char *display = qdict_get_try_str(qdict, "display");
-     Error *err = NULL;
-+    DisplayProtocol proto;
-+
-+    ExpirePasswordOptions opts = {
-+        .time = g_strdup(whenstr),
-+        .u.vnc.display = NULL,
-+    };
-+
-+    proto = qapi_enum_parse(&DisplayProtocol_lookup, protocol,
-+                            DISPLAY_PROTOCOL_VNC, &err);
-+    if (err) {
-+        hmp_handle_error(mon, err);
-+        return;
-+    }
-+    opts.protocol = proto;
-+
-+    if (proto == DISPLAY_PROTOCOL_VNC) {
-+        opts.u.vnc.has_display = !!display;
-+        opts.u.vnc.display = g_strdup(display);
-+    }
- 
--    qmp_expire_password(protocol, whenstr, &err);
-+    qmp_expire_password(&opts, &err);
-+    g_free(opts.time);
-+    g_free(opts.u.vnc.display);
-     hmp_handle_error(mon, err);
- }
- 
-diff --git a/monitor/qmp-cmds.c b/monitor/qmp-cmds.c
-index f7d64a6457..65882b5997 100644
---- a/monitor/qmp-cmds.c
-+++ b/monitor/qmp-cmds.c
-@@ -164,45 +164,30 @@ void qmp_system_wakeup(Error **errp)
-     qemu_system_wakeup_request(QEMU_WAKEUP_REASON_OTHER, errp);
- }
- 
--void qmp_set_password(const char *protocol, const char *password,
--                      bool has_connected, const char *connected, Error **errp)
-+void qmp_set_password(SetPasswordOptions *opts, Error **errp)
- {
--    int disconnect_if_connected = 0;
--    int fail_if_connected = 0;
--    int rc;
--
--    if (has_connected) {
--        if (strcmp(connected, "fail") == 0) {
--            fail_if_connected = 1;
--        } else if (strcmp(connected, "disconnect") == 0) {
--            disconnect_if_connected = 1;
--        } else if (strcmp(connected, "keep") == 0) {
--            /* nothing */
--        } else {
--            error_setg(errp, QERR_INVALID_PARAMETER, "connected");
--            return;
--        }
--    }
-+    bool disconnect_if_connected = false;
-+    bool fail_if_connected = false;
-+    int rc = 0;
- 
--    if (strcmp(protocol, "spice") == 0) {
-+    if (opts->protocol == DISPLAY_PROTOCOL_SPICE) {
-         if (!qemu_using_spice(errp)) {
-             return;
-         }
--        rc = qemu_spice.set_passwd(password, fail_if_connected,
--                                   disconnect_if_connected);
--    } else if (strcmp(protocol, "vnc") == 0) {
--        if (fail_if_connected || disconnect_if_connected) {
--            /* vnc supports "connected=keep" only */
--            error_setg(errp, QERR_INVALID_PARAMETER, "connected");
--            return;
-+        if (opts->u.spice.has_connected) {
-+            fail_if_connected =
-+                opts->u.spice.connected == SET_PASSWORD_ACTION_FAIL;
-+            disconnect_if_connected =
-+                opts->u.spice.connected == SET_PASSWORD_ACTION_DISCONNECT;
-         }
-+        rc = qemu_spice.set_passwd(opts->password, fail_if_connected,
-+                                   disconnect_if_connected);
-+    } else if (opts->protocol == DISPLAY_PROTOCOL_VNC) {
-         /* Note that setting an empty password will not disable login through
-          * this interface. */
--        rc = vnc_display_password(NULL, password);
--    } else {
--        error_setg(errp, QERR_INVALID_PARAMETER_VALUE, "protocol",
--                   "'vnc' or 'spice'");
--        return;
-+        rc = vnc_display_password(
-+                opts->u.vnc.has_display ? opts->u.vnc.display : NULL,
-+                opts->password);
-     }
- 
-     if (rc != 0) {
-@@ -210,11 +195,11 @@ void qmp_set_password(const char *protocol, const char *password,
-     }
- }
- 
--void qmp_expire_password(const char *protocol, const char *whenstr,
--                         Error **errp)
-+void qmp_expire_password(ExpirePasswordOptions *opts, Error **errp)
- {
-     time_t when;
-     int rc;
-+    const char* whenstr = opts->time;
- 
-     if (strcmp(whenstr, "now") == 0) {
-         when = 0;
-@@ -226,17 +211,14 @@ void qmp_expire_password(const char *protocol, const char *whenstr,
-         when = strtoull(whenstr, NULL, 10);
-     }
- 
--    if (strcmp(protocol, "spice") == 0) {
-+    if (opts->protocol == DISPLAY_PROTOCOL_SPICE) {
-         if (!qemu_using_spice(errp)) {
-             return;
-         }
-         rc = qemu_spice.set_pw_expire(when);
--    } else if (strcmp(protocol, "vnc") == 0) {
--        rc = vnc_display_pw_expire(NULL, when);
--    } else {
--        error_setg(errp, QERR_INVALID_PARAMETER_VALUE, "protocol",
--                   "'vnc' or 'spice'");
--        return;
-+    } else if (opts->protocol == DISPLAY_PROTOCOL_VNC) {
-+        rc = vnc_display_pw_expire(
-+                opts->u.vnc.has_display ? opts->u.vnc.display : NULL, when);
-     }
- 
-     if (rc != 0) {
-diff --git a/qapi/ui.json b/qapi/ui.json
-index fd9677d48e..0177cf4ee9 100644
---- a/qapi/ui.json
-+++ b/qapi/ui.json
-@@ -10,20 +10,21 @@
- { 'include': 'sockets.json' }
- 
- ##
--# @set_password:
-+# @DisplayProtocol:
- #
--# Sets the password of a remote display session.
-+# Display protocols which support changing password options.
- #
--# @protocol: - 'vnc' to modify the VNC server password
--#            - 'spice' to modify the Spice server password
-+# Since: 6.2
- #
--# @password: the new password
-+##
-+{ 'enum': 'DisplayProtocol',
-+  'data': [ { 'name': 'vnc', 'if': 'defined(CONFIG_VNC)' },
-+            { 'name': 'spice', 'if': 'defined(CONFIG_SPICE)' } ] }
-+
-+##
-+# @set_password:
- #
--# @connected: how to handle existing clients when changing the
--#             password.  If nothing is specified, defaults to 'keep'
--#             'fail' to fail the command if clients are connected
--#             'disconnect' to disconnect existing clients
--#             'keep' to maintain existing clients
-+# Sets the password of a remote display session.
- #
- # Returns: - Nothing on success
- #          - If Spice is not enabled, DeviceNotFound
-@@ -37,16 +38,123 @@
- # <- { "return": {} }
- #
- ##
--{ 'command': 'set_password',
--  'data': {'protocol': 'str', 'password': 'str', '*connected': 'str'} }
-+{ 'command': 'set_password', 'boxed': true, 'data': 'SetPasswordOptions' }
-+
-+##
-+# @SetPasswordOptions:
-+#
-+# Data required to set a new password on a display server protocol.
-+#
-+# @protocol: - 'vnc' to modify the VNC server password
-+#            - 'spice' to modify the Spice server password
-+#
-+# @password: the new password
-+#
-+# Since: 6.2
-+#
-+##
-+{ 'union': 'SetPasswordOptions',
-+  'base': { 'protocol': 'DisplayProtocol',
-+            'password': 'str' },
-+  'discriminator': 'protocol',
-+  'data': { 'vnc': 'SetPasswordOptionsVnc',
-+            'spice': 'SetPasswordOptionsSpice' } }
-+
-+##
-+# @SetPasswordAction:
-+#
-+# An action to take on changing a password on a connection with active clients.
-+#
-+# @fail: fail the command if clients are connected
-+#
-+# @disconnect: disconnect existing clients
-+#
-+# @keep: maintain existing clients
-+#
-+# Since: 6.2
-+#
-+##
-+{ 'enum': 'SetPasswordAction',
-+  'data': [ 'fail', 'disconnect', 'keep' ] }
-+
-+##
-+# @SetPasswordActionVnc:
-+#
-+# See @SetPasswordAction. VNC only supports the keep action. 'connection'
-+# should just be omitted for VNC, this is kept for backwards compatibility.
-+#
-+# @keep: maintain existing clients
-+#
-+# Since: 6.2
-+#
-+##
-+{ 'enum': 'SetPasswordActionVnc',
-+  'data': [ 'keep' ] }
-+
-+##
-+# @SetPasswordOptionsSpice:
-+#
-+# Options for set_password specific to the VNC procotol.
-+#
-+# @connected: How to handle existing clients when changing the
-+#             password. If nothing is specified, defaults to 'keep'.
-+#
-+# Since: 6.2
-+#
-+##
-+{ 'struct': 'SetPasswordOptionsSpice',
-+  'data': { '*connected': 'SetPasswordAction' } }
-+
-+##
-+# @SetPasswordOptionsVnc:
-+#
-+# Options for set_password specific to the VNC procotol.
-+#
-+# @display: The id of the display where the password should be changed.
-+#           Defaults to the first.
-+#
-+# @connected: How to handle existing clients when changing the
-+#             password.
-+#
-+# Features:
-+# @deprecated: For VNC, @connected will always be 'keep', parameter should be
-+#              omitted.
-+#
-+# Since: 6.2
-+#
-+##
-+{ 'struct': 'SetPasswordOptionsVnc',
-+  'data': { '*display': 'str',
-+            '*connected': { 'type': 'SetPasswordActionVnc',
-+                            'features': ['deprecated'] } } }
- 
- ##
- # @expire_password:
- #
- # Expire the password of a remote display server.
- #
--# @protocol: the name of the remote display protocol 'vnc' or 'spice'
-+# Returns: - Nothing on success
-+#          - If @protocol is 'spice' and Spice is not active, DeviceNotFound
-+#
-+# Since: 0.14
-+#
-+# Example:
-+#
-+# -> { "execute": "expire_password", "arguments": { "protocol": "vnc",
-+#                                                   "time": "+60" } }
-+# <- { "return": {} }
-+#
-+##
-+{ 'command': 'expire_password', 'boxed': true, 'data': 'ExpirePasswordOptions' }
-+
-+##
-+# @ExpirePasswordOptions:
-+#
-+# Data required to set password expiration on a display server protocol.
- #
-+# @protocol: - 'vnc' to modify the VNC server expiration
-+#            - 'spice' to modify the Spice server expiration
-+
- # @time: when to expire the password.
- #
- #        - 'now' to expire the password immediately
-@@ -54,24 +162,33 @@
- #        - '+INT' where INT is the number of seconds from now (integer)
- #        - 'INT' where INT is the absolute time in seconds
- #
--# Returns: - Nothing on success
--#          - If @protocol is 'spice' and Spice is not active, DeviceNotFound
--#
--# Since: 0.14
--#
- # Notes: Time is relative to the server and currently there is no way to
- #        coordinate server time with client time.  It is not recommended to
- #        use the absolute time version of the @time parameter unless you're
- #        sure you are on the same machine as the QEMU instance.
- #
--# Example:
-+# Since: 6.2
- #
--# -> { "execute": "expire_password", "arguments": { "protocol": "vnc",
--#                                                   "time": "+60" } }
--# <- { "return": {} }
-+##
-+{ 'union': 'ExpirePasswordOptions',
-+  'base': { 'protocol': 'DisplayProtocol',
-+            'time': 'str' },
-+  'discriminator': 'protocol',
-+  'data': { 'vnc': 'ExpirePasswordOptionsVnc' } }
-+
-+##
-+# @ExpirePasswordOptionsVnc:
-+#
-+# Options for expire_password specific to the VNC procotol.
-+#
-+# @display: The id of the display where the expiration should be changed.
-+#           Defaults to the first.
-+#
-+# Since: 6.2
- #
- ##
--{ 'command': 'expire_password', 'data': {'protocol': 'str', 'time': 'str'} }
-+{ 'struct': 'ExpirePasswordOptionsVnc',
-+  'data': { '*display': 'str' } }
- 
- ##
- # @screendump:

debian/patches/extra/0005-monitor-hmp-correctly-invert-password-argument-detec.patch

@@ -1,36 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Stefan Reiter <s.reiter@proxmox.com>
-Date: Wed, 25 Aug 2021 11:08:41 +0200
-Subject: [PATCH] monitor/hmp: correctly invert password argument detection
- again
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Commit cfb5387a1d 'hmp: remove "change vnc TARGET" command' claims to
-remove the HMP "change vnc" command, but doesn't actually do that.
-Instead it rewires it to use 'qmp_change_vnc_password', and in the
-process inverts the argument detection - ignoring the first issue, this
-inversion is wrong, as this will now ask the user for a password if one
-is already provided, and simply fail if none is given.
-
-Fixes: cfb5387a1d ("hmp: remove "change vnc TARGET" command")
-Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
-Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
----
- monitor/hmp-cmds.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
-diff --git a/monitor/hmp-cmds.c b/monitor/hmp-cmds.c
-index 047294e1ed..f4ef58d257 100644
---- a/monitor/hmp-cmds.c
-+++ b/monitor/hmp-cmds.c
-@@ -1549,7 +1549,7 @@ void hmp_change(Monitor *mon, const QDict *qdict)
-         }
-         if (strcmp(target, "passwd") == 0 ||
-             strcmp(target, "password") == 0) {
--            if (arg) {
-+            if (!arg) {
-                 MonitorHMP *hmp_mon = container_of(mon, MonitorHMP, common);
-                 monitor_read_password(hmp_mon, hmp_change_read_arg, NULL);
-                 return;

debian/patches/extra/0005-virtio-net-Add-queues-before-loading-them.patch

@@ -0,0 +1,81 @@
+From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
+From: Akihiko Odaki <akihiko.odaki@daynix.com>
+Date: Tue, 22 Oct 2024 15:49:01 +0900
+Subject: [PATCH] virtio-net: Add queues before loading them
+
+Call virtio_net_set_multiqueue() to add queues before loading their
+states. Otherwise the loaded queues will not have handlers and elements
+in them will not be processed.
+
+Cc: qemu-stable@nongnu.org
+Fixes: 8c49756825da ("virtio-net: Add only one queue pair when realizing")
+Reported-by: Laurent Vivier <lvivier@redhat.com>
+Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
+Acked-by: Michael S. Tsirkin <mst@redhat.com>
+(picked from https://lore.kernel.org/qemu-devel/20241022-load-v1-1-99df0bff7939@daynix.com/)
+Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
+---
+ hw/net/virtio-net.c        | 10 ++++++++++
+ hw/virtio/virtio.c         |  7 +++++++
+ include/hw/virtio/virtio.h |  2 ++
+ 3 files changed, 19 insertions(+)
+
+diff --git a/hw/net/virtio-net.c b/hw/net/virtio-net.c
+index ed33a32877..90d05f94d4 100644
+--- a/hw/net/virtio-net.c
++++ b/hw/net/virtio-net.c
+@@ -3032,6 +3032,15 @@ static void virtio_net_set_multiqueue(VirtIONet *n, int multiqueue)
+     virtio_net_set_queue_pairs(n);
+ }
+ 
++static int virtio_net_pre_load_queues(VirtIODevice *vdev)
++{
++    virtio_net_set_multiqueue(VIRTIO_NET(vdev),
++                              virtio_has_feature(vdev->guest_features, VIRTIO_NET_F_RSS) ||
++                              virtio_has_feature(vdev->guest_features, VIRTIO_NET_F_MQ));
++
++    return 0;
++}
++
+ static int virtio_net_post_load_device(void *opaque, int version_id)
+ {
+     VirtIONet *n = opaque;
+@@ -4010,6 +4019,7 @@ static void virtio_net_class_init(ObjectClass *klass, void *data)
+     vdc->guest_notifier_mask = virtio_net_guest_notifier_mask;
+     vdc->guest_notifier_pending = virtio_net_guest_notifier_pending;
+     vdc->legacy_features |= (0x1 << VIRTIO_NET_F_GSO);
++    vdc->pre_load_queues = virtio_net_pre_load_queues;
+     vdc->post_load = virtio_net_post_load_virtio;
+     vdc->vmsd = &vmstate_virtio_net_device;
+     vdc->primary_unplug_pending = primary_unplug_pending;
+diff --git a/hw/virtio/virtio.c b/hw/virtio/virtio.c
+index 9e10cbc058..10f24a58dd 100644
+--- a/hw/virtio/virtio.c
++++ b/hw/virtio/virtio.c
+@@ -3251,6 +3251,13 @@ virtio_load(VirtIODevice *vdev, QEMUFile *f, int version_id)
+         config_len--;
+     }
+ 
++    if (vdc->pre_load_queues) {
++        ret = vdc->pre_load_queues(vdev);
++        if (ret) {
++            return ret;
++        }
++    }
++
+     num = qemu_get_be32(f);
+ 
+     if (num > VIRTIO_QUEUE_MAX) {
+diff --git a/include/hw/virtio/virtio.h b/include/hw/virtio/virtio.h
+index 0fcbc5c0c6..953dfca27c 100644
+--- a/include/hw/virtio/virtio.h
++++ b/include/hw/virtio/virtio.h
+@@ -210,6 +210,8 @@ struct VirtioDeviceClass {
+     void (*guest_notifier_mask)(VirtIODevice *vdev, int n, bool mask);
+     int (*start_ioeventfd)(VirtIODevice *vdev);
+     void (*stop_ioeventfd)(VirtIODevice *vdev);
++    /* Called before loading queues. Useful to add queues before loading. */
++    int (*pre_load_queues)(VirtIODevice *vdev);
+     /* Saving and loading of a device; trying to deprecate save/load
+      * use vmsd for new devices.
+      */

debian/patches/extra/0006-qxl-fix-pre-save-logic.patch

@@ -1,34 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Gerd Hoffmann <kraxel@redhat.com>
-Date: Fri, 10 Sep 2021 11:42:03 +0200
-Subject: [PATCH] qxl: fix pre-save logic
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Oops.  Logic is backwards.
-
-Fixes: 39b8a183e2f3 ("qxl: remove assert in qxl_pre_save.")
-Resolves: https://gitlab.com/qemu-project/qemu/-/issues/610
-Resolves: https://bugzilla.redhat.com//show_bug.cgi?id=2002907
-Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
-Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
-Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
-Message-Id: <20210910094203.3582378-1-kraxel@redhat.com>
----
- hw/display/qxl.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
-diff --git a/hw/display/qxl.c b/hw/display/qxl.c
-index 43482d4364..29c80b4289 100644
---- a/hw/display/qxl.c
-+++ b/hw/display/qxl.c
-@@ -2252,7 +2252,7 @@ static int qxl_pre_save(void *opaque)
-     } else {
-         d->last_release_offset = (uint8_t *)d->last_release - ram_start;
-     }
--    if (d->last_release_offset < d->vga.vram_size) {
-+    if (d->last_release_offset >= d->vga.vram_size) {
-         return 1;
-     }
- 

debian/patches/extra/0006-virtio-net-Fix-size-check-in-dhclient-workaround.patch

@@ -0,0 +1,36 @@
+From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
+From: Akihiko Odaki <akihiko.odaki@daynix.com>
+Date: Fri, 22 Nov 2024 14:03:08 +0900
+Subject: [PATCH] virtio-net: Fix size check in dhclient workaround
+
+work_around_broken_dhclient() accesses IP and UDP headers to detect
+relevant packets and to calculate checksums, but it didn't check if
+the packet has size sufficient to accommodate them, causing out-of-bound
+access hazards. Fix this by correcting the size requirement.
+
+Fixes: 1d41b0c1ec66 ("Work around dhclient brokenness")
+Cc: qemu-stable@nongnu.org
+Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
+(picked from https://lore.kernel.org/qemu-devel/20241122-queue-v3-2-f2ff03b8dbfd@daynix.com/#t)
+Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
+---
+ hw/net/virtio-net.c | 5 ++++-
+ 1 file changed, 4 insertions(+), 1 deletion(-)
+
+diff --git a/hw/net/virtio-net.c b/hw/net/virtio-net.c
+index 90d05f94d4..c1fe457359 100644
+--- a/hw/net/virtio-net.c
++++ b/hw/net/virtio-net.c
+@@ -1692,8 +1692,11 @@ static void virtio_net_hdr_swap(VirtIODevice *vdev, struct virtio_net_hdr *hdr)
+ static void work_around_broken_dhclient(struct virtio_net_hdr *hdr,
+                                         uint8_t *buf, size_t size)
+ {
++    size_t csum_size = ETH_HLEN + sizeof(struct ip_header) +
++                       sizeof(struct udp_header);
++
+     if ((hdr->flags & VIRTIO_NET_HDR_F_NEEDS_CSUM) && /* missing csum */
+-        (size > 27 && size < 1500) && /* normal sized MTU */
++        (size >= csum_size && size < 1500) && /* normal sized MTU */
+         (buf[12] == 0x08 && buf[13] == 0x00) && /* ethertype == IPv4 */
+         (buf[23] == 17) && /* ip.protocol == UDP */
+         (buf[34] == 0 && buf[35] == 67)) { /* udp.srcport == bootps */

debian/patches/extra/0007-block-mirror-fix-NULL-pointer-dereference-in-mirror_.patch

@@ -1,85 +0,0 @@
-From 14889c02315b196f28b02832362dead64b015b6e Mon Sep 17 00:00:00 2001
-From: Stefano Garzarella <sgarzare@redhat.com>
-Date: Fri, 10 Sep 2021 14:45:33 +0200
-Subject: [PATCH qemu] block/mirror: fix NULL pointer dereference in
- mirror_wait_on_conflicts()
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-In mirror_iteration() we call mirror_wait_on_conflicts() with
-`self` parameter set to NULL.
-
-Starting from commit d44dae1a7c we dereference `self` pointer in
-mirror_wait_on_conflicts() without checks if it is not NULL.
-
-Backtrace:
-  Program terminated with signal SIGSEGV, Segmentation fault.
-  #0  mirror_wait_on_conflicts (self=0x0, s=<optimized out>, offset=<optimized out>, bytes=<optimized out>)
-      at ../block/mirror.c:172
-  172	                self->waiting_for_op = op;
-  [Current thread is 1 (Thread 0x7f0908931ec0 (LWP 380249))]
-  (gdb) bt
-  #0  mirror_wait_on_conflicts (self=0x0, s=<optimized out>, offset=<optimized out>, bytes=<optimized out>)
-      at ../block/mirror.c:172
-  #1  0x00005610c5d9d631 in mirror_run (job=0x5610c76a2c00, errp=<optimized out>) at ../block/mirror.c:491
-  #2  0x00005610c5d58726 in job_co_entry (opaque=0x5610c76a2c00) at ../job.c:917
-  #3  0x00005610c5f046c6 in coroutine_trampoline (i0=<optimized out>, i1=<optimized out>)
-      at ../util/coroutine-ucontext.c:173
-  #4  0x00007f0909975820 in ?? () at ../sysdeps/unix/sysv/linux/x86_64/__start_context.S:91
-      from /usr/lib64/libc.so.6
-
-Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=2001404
-Fixes: d44dae1a7c ("block/mirror: fix active mirror dead-lock in mirror_wait_on_conflicts")
-Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
-Message-Id: <20210910124533.288318-1-sgarzare@redhat.com>
-Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
-Signed-off-by: Hanna Reitz <hreitz@redhat.com>
-(cherry picked from commit 66fed30c9cd11854fc878a4eceb507e915d7c9cd)
-Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
----
- block/mirror.c | 25 ++++++++++++++++---------
- 1 file changed, 16 insertions(+), 9 deletions(-)
-
-diff --git a/block/mirror.c b/block/mirror.c
-index 33477ade1b..6a126d18c8 100644
---- a/block/mirror.c
-+++ b/block/mirror.c
-@@ -162,18 +162,25 @@ static void coroutine_fn mirror_wait_on_conflicts(MirrorOp *self,
-             if (ranges_overlap(self_start_chunk, self_nb_chunks,
-                                op_start_chunk, op_nb_chunks))
-             {
--                /*
--                 * If the operation is already (indirectly) waiting for us, or
--                 * will wait for us as soon as it wakes up, then just go on
--                 * (instead of producing a deadlock in the former case).
--                 */
--                if (op->waiting_for_op) {
--                    continue;
-+                if (self) {
-+                    /*
-+                     * If the operation is already (indirectly) waiting for us,
-+                     * or will wait for us as soon as it wakes up, then just go
-+                     * on (instead of producing a deadlock in the former case).
-+                     */
-+                    if (op->waiting_for_op) {
-+                        continue;
-+                    }
-+
-+                    self->waiting_for_op = op;
-                 }
- 
--                self->waiting_for_op = op;
-                 qemu_co_queue_wait(&op->waiting_requests, NULL);
--                self->waiting_for_op = NULL;
-+
-+                if (self) {
-+                    self->waiting_for_op = NULL;
-+                }
-+
-                 break;
-             }
-         }
--- 
-2.30.2
-

debian/patches/extra/0008-block-introduce-max_hw_iov-for-use-in-scsi-generic.patch

@@ -1,124 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Paolo Bonzini <pbonzini@redhat.com>
-Date: Thu, 23 Sep 2021 09:04:36 -0400
-Subject: [PATCH] block: introduce max_hw_iov for use in scsi-generic
-
-Linux limits the size of iovecs to 1024 (UIO_MAXIOV in the kernel
-sources, IOV_MAX in POSIX).  Because of this, on some host adapters
-requests with many iovecs are rejected with -EINVAL by the
-io_submit() or readv()/writev() system calls.
-
-In fact, the same limit applies to SG_IO as well.  To fix both the
-EINVAL and the possible performance issues from using fewer iovecs
-than allowed by Linux (some HBAs have max_segments as low as 128),
-introduce a separate entry in BlockLimits to hold the max_segments
-value from sysfs.  This new limit is used only for SG_IO and clamped
-to bs->bl.max_iov anyway, just like max_hw_transfer is clamped to
-bs->bl.max_transfer.
-
-Reported-by: Halil Pasic <pasic@linux.ibm.com>
-Cc: Hanna Reitz <hreitz@redhat.com>
-Cc: Kevin Wolf <kwolf@redhat.com>
-Cc: qemu-block@nongnu.org
-Cc: qemu-stable@nongnu.org
-Fixes: 18473467d5 ("file-posix: try BLKSECTGET on block devices too, do not round to power of 2", 2021-06-25)
-Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-Message-Id: <20210923130436.1187591-1-pbonzini@redhat.com>
-Signed-off-by: Kevin Wolf <kwolf@redhat.com>
----
- block/block-backend.c          | 6 ++++++
- block/file-posix.c             | 2 +-
- block/io.c                     | 1 +
- hw/scsi/scsi-generic.c         | 2 +-
- include/block/block_int.h      | 7 +++++++
- include/sysemu/block-backend.h | 1 +
- 6 files changed, 17 insertions(+), 2 deletions(-)
-
-diff --git a/block/block-backend.c b/block/block-backend.c
-index 6140d133e2..ba2b5ebb10 100644
---- a/block/block-backend.c
-+++ b/block/block-backend.c
-@@ -1986,6 +1986,12 @@ uint32_t blk_get_max_transfer(BlockBackend *blk)
-     return ROUND_DOWN(max, blk_get_request_alignment(blk));
- }
- 
-+int blk_get_max_hw_iov(BlockBackend *blk)
-+{
-+    return MIN_NON_ZERO(blk->root->bs->bl.max_hw_iov,
-+                        blk->root->bs->bl.max_iov);
-+}
-+
- int blk_get_max_iov(BlockBackend *blk)
- {
-     return blk->root->bs->bl.max_iov;
-diff --git a/block/file-posix.c b/block/file-posix.c
-index c62e42743d..53be0bdc1b 100644
---- a/block/file-posix.c
-+++ b/block/file-posix.c
-@@ -1273,7 +1273,7 @@ static void raw_refresh_limits(BlockDriverState *bs, Error **errp)
- 
-         ret = hdev_get_max_segments(s->fd, &st);
-         if (ret > 0) {
--            bs->bl.max_iov = ret;
-+            bs->bl.max_hw_iov = ret;
-         }
-     }
- }
-diff --git a/block/io.c b/block/io.c
-index 18d345a87a..bb0a254def 100644
---- a/block/io.c
-+++ b/block/io.c
-@@ -136,6 +136,7 @@ static void bdrv_merge_limits(BlockLimits *dst, const BlockLimits *src)
-     dst->min_mem_alignment = MAX(dst->min_mem_alignment,
-                                  src->min_mem_alignment);
-     dst->max_iov = MIN_NON_ZERO(dst->max_iov, src->max_iov);
-+    dst->max_hw_iov = MIN_NON_ZERO(dst->max_hw_iov, src->max_hw_iov);
- }
- 
- typedef struct BdrvRefreshLimitsState {
-diff --git a/hw/scsi/scsi-generic.c b/hw/scsi/scsi-generic.c
-index 665baf900e..0306ccc7b1 100644
---- a/hw/scsi/scsi-generic.c
-+++ b/hw/scsi/scsi-generic.c
-@@ -180,7 +180,7 @@ static int scsi_handle_inquiry_reply(SCSIGenericReq *r, SCSIDevice *s, int len)
-         page = r->req.cmd.buf[2];
-         if (page == 0xb0) {
-             uint64_t max_transfer = blk_get_max_hw_transfer(s->conf.blk);
--            uint32_t max_iov = blk_get_max_iov(s->conf.blk);
-+            uint32_t max_iov = blk_get_max_hw_iov(s->conf.blk);
- 
-             assert(max_transfer);
-             max_transfer = MIN_NON_ZERO(max_transfer, max_iov * qemu_real_host_page_size)
-diff --git a/include/block/block_int.h b/include/block/block_int.h
-index ffe86068d4..f4c75e8ba9 100644
---- a/include/block/block_int.h
-+++ b/include/block/block_int.h
-@@ -718,6 +718,13 @@ typedef struct BlockLimits {
-      */
-     uint64_t max_hw_transfer;
- 
-+    /* Maximal number of scatter/gather elements allowed by the hardware.
-+     * Applies whenever transfers to the device bypass the kernel I/O
-+     * scheduler, for example with SG_IO.  If larger than max_iov
-+     * or if zero, blk_get_max_hw_iov will fall back to max_iov.
-+     */
-+    int max_hw_iov;
-+
-     /* memory alignment, in bytes so that no bounce buffer is needed */
-     size_t min_mem_alignment;
- 
-diff --git a/include/sysemu/block-backend.h b/include/sysemu/block-backend.h
-index 29d4fdbf63..82bae55161 100644
---- a/include/sysemu/block-backend.h
-+++ b/include/sysemu/block-backend.h
-@@ -211,6 +211,7 @@ uint32_t blk_get_request_alignment(BlockBackend *blk);
- uint32_t blk_get_max_transfer(BlockBackend *blk);
- uint64_t blk_get_max_hw_transfer(BlockBackend *blk);
- int blk_get_max_iov(BlockBackend *blk);
-+int blk_get_max_hw_iov(BlockBackend *blk);
- void blk_set_guest_block_size(BlockBackend *blk, int align);
- void *blk_try_blockalign(BlockBackend *blk, size_t size);
- void *blk_blockalign(BlockBackend *blk, size_t size);
--- 
-2.30.2
-

debian/patches/pve/0001-PVE-Config-block-file-change-locking-default-to-off.patch

@@ -14,10 +14,10 @@ Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
  1 file changed, 2 insertions(+), 2 deletions(-)
 
 diff --git a/block/file-posix.c b/block/file-posix.c
-index cb9bffe047..1bbeb9e658 100644
+index ff928b5e85..99e5bea1cc 100644
 --- a/block/file-posix.c
 +++ b/block/file-posix.c
-@@ -533,7 +533,7 @@ static QemuOptsList raw_runtime_opts = {
+@@ -564,7 +564,7 @@ static QemuOptsList raw_runtime_opts = {
          {
              .name = "locking",
              .type = QEMU_OPT_STRING,
@@ -26,7 +26,7 @@ index cb9bffe047..1bbeb9e658 100644
          },
          {
              .name = "pr-manager",
-@@ -631,7 +631,7 @@ static int raw_open_common(BlockDriverState *bs, QDict *options,
+@@ -664,7 +664,7 @@ static int raw_open_common(BlockDriverState *bs, QDict *options,
          s->use_lock = false;
          break;
      case ON_OFF_AUTO_AUTO:

debian/patches/pve/0002-PVE-Config-Adjust-network-script-path-to-etc-kvm.patch

@@ -9,10 +9,10 @@ Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
  1 file changed, 2 insertions(+), 2 deletions(-)
 
 diff --git a/include/net/net.h b/include/net/net.h
-index 5d1508081f..f665924193 100644
+index c8f679761b..35a1338e40 100644
 --- a/include/net/net.h
 +++ b/include/net/net.h
-@@ -219,8 +219,8 @@ void netdev_add(QemuOpts *opts, Error **errp);
+@@ -309,8 +309,8 @@ void netdev_add(QemuOpts *opts, Error **errp);
  int net_hub_id_for_client(NetClientState *nc, int *id);
  NetClientState *net_hub_port_find(int hub_id);
  

debian/patches/pve/0003-PVE-Config-set-the-CPU-model-to-kvm64-32-instead-of-.patch

@@ -10,10 +10,10 @@ Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
  1 file changed, 2 insertions(+), 2 deletions(-)
 
 diff --git a/target/i386/cpu.h b/target/i386/cpu.h
-index 6c50d3ab4f..00289a798a 100644
+index fa027cc206..da7ef0cbe6 100644
 --- a/target/i386/cpu.h
 +++ b/target/i386/cpu.h
-@@ -2006,9 +2006,9 @@ uint64_t cpu_get_tsc(CPUX86State *env);
+@@ -2418,9 +2418,9 @@ uint64_t cpu_get_tsc(CPUX86State *env);
  #define CPU_RESOLVING_TYPE TYPE_X86_CPU
  
  #ifdef TARGET_X86_64
@@ -24,4 +24,4 @@ index 6c50d3ab4f..00289a798a 100644
 +#define TARGET_DEFAULT_CPU_TYPE X86_CPU_TYPE_NAME("kvm32")
  #endif
  
- #define cpu_signal_handler cpu_x86_signal_handler
+ #define cpu_list x86_cpu_list

debian/patches/pve/0004-PVE-Config-ui-spice-default-to-pve-certificates.patch

@@ -9,10 +9,10 @@ Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
  1 file changed, 9 insertions(+), 6 deletions(-)
 
 diff --git a/ui/spice-core.c b/ui/spice-core.c
-index 0371055e6c..840cf56923 100644
+index 15be640286..ea20e6153c 100644
 --- a/ui/spice-core.c
 +++ b/ui/spice-core.c
-@@ -694,32 +694,35 @@ static void qemu_spice_init(void)
+@@ -690,32 +690,35 @@ static void qemu_spice_init(void)
  
      if (tls_port) {
          x509_dir = qemu_opt_get(opts, "x509-dir");

debian/patches/pve/0005-PVE-Config-glusterfs-no-default-logfile-if-daemonize.patch

@@ -9,7 +9,7 @@ Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
  1 file changed, 11 insertions(+), 4 deletions(-)
 
 diff --git a/block/gluster.c b/block/gluster.c
-index e8ee14c8e9..3eb6a05500 100644
+index f8b415f381..02bde39d94 100644
 --- a/block/gluster.c
 +++ b/block/gluster.c
 @@ -42,7 +42,7 @@
@@ -21,15 +21,15 @@ index e8ee14c8e9..3eb6a05500 100644
  /*
   * Several versions of GlusterFS (3.12? -> 6.0.1) fail when the transfer size
   * is greater or equal to 1024 MiB, so we are limiting the transfer size to 512
-@@ -424,6 +424,7 @@ static struct glfs *qemu_gluster_glfs_init(BlockdevOptionsGluster *gconf,
+@@ -421,6 +421,7 @@ static struct glfs *qemu_gluster_glfs_init(BlockdevOptionsGluster *gconf,
      int old_errno;
      SocketAddressList *server;
-     unsigned long long port;
+     uint64_t port;
 +    const char *logfile;
  
      glfs = glfs_find_preopened(gconf->volume);
      if (glfs) {
-@@ -466,9 +467,15 @@ static struct glfs *qemu_gluster_glfs_init(BlockdevOptionsGluster *gconf,
+@@ -463,9 +464,15 @@ static struct glfs *qemu_gluster_glfs_init(BlockdevOptionsGluster *gconf,
          }
      }
  

debian/patches/pve/0006-PVE-Config-rbd-block-rbd-disable-rbd_cache_writethro.patch

@@ -18,10 +18,10 @@ Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
  1 file changed, 2 insertions(+)
 
 diff --git a/block/rbd.c b/block/rbd.c
-index dcf82b15b8..feeec452f0 100644
+index 9c0fd0cb3f..101ee59d6e 100644
 --- a/block/rbd.c
 +++ b/block/rbd.c
-@@ -814,6 +814,8 @@ static int qemu_rbd_connect(rados_t *cluster, rados_ioctx_t *io_ctx,
+@@ -963,6 +963,8 @@ static int qemu_rbd_connect(rados_t *cluster, rados_ioctx_t *io_ctx,
          rados_conf_set(*cluster, "rbd_cache", "false");
      }
  

debian/patches/pve/0007-PVE-Up-glusterfs-allow-partial-reads.patch

@@ -16,7 +16,7 @@ Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
  1 file changed, 9 insertions(+), 1 deletion(-)
 
 diff --git a/block/gluster.c b/block/gluster.c
-index 3eb6a05500..b612918ee8 100644
+index 02bde39d94..36c00088cc 100644
 --- a/block/gluster.c
 +++ b/block/gluster.c
 @@ -57,6 +57,7 @@ typedef struct GlusterAIOCB {
@@ -27,7 +27,7 @@ index 3eb6a05500..b612918ee8 100644
  } GlusterAIOCB;
  
  typedef struct BDRVGlusterState {
-@@ -752,8 +753,10 @@ static void gluster_finish_aiocb(struct glfs_fd *fd, ssize_t ret,
+@@ -749,8 +750,10 @@ static void gluster_finish_aiocb(struct glfs_fd *fd, ssize_t ret,
          acb->ret = 0; /* Success */
      } else if (ret < 0) {
          acb->ret = -errno; /* Read/Write failed */
@@ -39,15 +39,15 @@ index 3eb6a05500..b612918ee8 100644
      }
  
      aio_co_schedule(acb->aio_context, acb->coroutine);
-@@ -1021,6 +1024,7 @@ static coroutine_fn int qemu_gluster_co_pwrite_zeroes(BlockDriverState *bs,
+@@ -1019,6 +1022,7 @@ static coroutine_fn int qemu_gluster_co_pwrite_zeroes(BlockDriverState *bs,
      acb.ret = 0;
      acb.coroutine = qemu_coroutine_self();
      acb.aio_context = bdrv_get_aio_context(bs);
 +    acb.is_write = true;
  
-     ret = glfs_zerofill_async(s->fd, offset, size, gluster_finish_aiocb, &acb);
+     ret = glfs_zerofill_async(s->fd, offset, bytes, gluster_finish_aiocb, &acb);
      if (ret < 0) {
-@@ -1202,9 +1206,11 @@ static coroutine_fn int qemu_gluster_co_rw(BlockDriverState *bs,
+@@ -1199,9 +1203,11 @@ static coroutine_fn int qemu_gluster_co_rw(BlockDriverState *bs,
      acb.aio_context = bdrv_get_aio_context(bs);
  
      if (write) {
@@ -59,7 +59,7 @@ index 3eb6a05500..b612918ee8 100644
          ret = glfs_preadv_async(s->fd, qiov->iov, qiov->niov, offset, 0,
                                  gluster_finish_aiocb, &acb);
      }
-@@ -1268,6 +1274,7 @@ static coroutine_fn int qemu_gluster_co_flush_to_disk(BlockDriverState *bs)
+@@ -1264,6 +1270,7 @@ static coroutine_fn int qemu_gluster_co_flush_to_disk(BlockDriverState *bs)
      acb.ret = 0;
      acb.coroutine = qemu_coroutine_self();
      acb.aio_context = bdrv_get_aio_context(bs);
@@ -67,11 +67,11 @@ index 3eb6a05500..b612918ee8 100644
  
      ret = glfs_fsync_async(s->fd, gluster_finish_aiocb, &acb);
      if (ret < 0) {
-@@ -1314,6 +1321,7 @@ static coroutine_fn int qemu_gluster_co_pdiscard(BlockDriverState *bs,
+@@ -1312,6 +1319,7 @@ static coroutine_fn int qemu_gluster_co_pdiscard(BlockDriverState *bs,
      acb.ret = 0;
      acb.coroutine = qemu_coroutine_self();
      acb.aio_context = bdrv_get_aio_context(bs);
 +    acb.is_write = true;
  
-     ret = glfs_discard_async(s->fd, offset, size, gluster_finish_aiocb, &acb);
+     ret = glfs_discard_async(s->fd, offset, bytes, gluster_finish_aiocb, &acb);
      if (ret < 0) {

debian/patches/pve/0007-PVE-Up-qmp-add-get_link_status.patch

@@ -1,88 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Wolfgang Bumiller <w.bumiller@proxmox.com>
-Date: Mon, 6 Apr 2020 12:16:37 +0200
-Subject: [PATCH] PVE: [Up] qmp: add get_link_status
-
-Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
----
- net/net.c        | 27 +++++++++++++++++++++++++++
- qapi/net.json    | 15 +++++++++++++++
- qapi/pragma.json |  1 +
- 3 files changed, 43 insertions(+)
-
-diff --git a/net/net.c b/net/net.c
-index 76bbb7c31b..82e0a768b4 100644
---- a/net/net.c
-+++ b/net/net.c
-@@ -1314,6 +1314,33 @@ void hmp_info_network(Monitor *mon, const QDict *qdict)
-     }
- }
- 
-+int64_t qmp_get_link_status(const char *name, Error **errp)
-+{
-+    NetClientState *ncs[MAX_QUEUE_NUM];
-+    NetClientState *nc;
-+    int queues;
-+    bool ret;
-+
-+    queues = qemu_find_net_clients_except(name, ncs,
-+                                          NET_CLIENT_DRIVER__MAX,
-+                                          MAX_QUEUE_NUM);
-+
-+    if (queues == 0) {
-+        error_set(errp, ERROR_CLASS_DEVICE_NOT_FOUND,
-+                  "Device '%s' not found", name);
-+        return (int64_t) -1;
-+    }
-+
-+    nc = ncs[0];
-+    ret = ncs[0]->link_down;
-+
-+    if (nc->peer->info->type == NET_CLIENT_DRIVER_NIC) {
-+      ret = ncs[0]->peer->link_down;
-+    }
-+
-+    return (int64_t) ret ? 0 : 1;
-+}
-+
- void colo_notify_filters_event(int event, Error **errp)
- {
-     NetClientState *nc;
-diff --git a/qapi/net.json b/qapi/net.json
-index 7fab2e7cd8..74c9a6109e 100644
---- a/qapi/net.json
-+++ b/qapi/net.json
-@@ -35,6 +35,21 @@
- ##
- { 'command': 'set_link', 'data': {'name': 'str', 'up': 'bool'} }
- 
-+##
-+# @get_link_status:
-+#
-+# Get the current link state of the nics or nic.
-+#
-+# @name: name of the nic you get the state of
-+#
-+# Return: If link is up 1
-+#         If link is down 0
-+#         If an error occure an empty string.
-+#
-+# Notes: this is an Proxmox VE extension and not offical part of Qemu.
-+##
-+{ 'command': 'get_link_status', 'data': {'name': 'str'} , 'returns': 'int' }
-+
- ##
- # @netdev_add:
- #
-diff --git a/qapi/pragma.json b/qapi/pragma.json
-index 3bc0335d1f..7c91ea3685 100644
---- a/qapi/pragma.json
-+++ b/qapi/pragma.json
-@@ -22,6 +22,7 @@
-         'system_reset',
-         'system_wakeup' ],
-     'command-returns-exceptions': [
-+        'get_link_status',
-         'human-monitor-command',
-         'qom-get',
-         'query-tpm-models',

debian/patches/pve/0008-PVE-Up-qemu-img-return-success-on-info-without-snaps.patch

@@ -9,10 +9,10 @@ Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
  1 file changed, 2 insertions(+), 1 deletion(-)
 
 diff --git a/qemu-img.c b/qemu-img.c
-index 908fd0cce5..5dc1d0a2ca 100644
+index 7668f86769..2575e97b43 100644
 --- a/qemu-img.c
 +++ b/qemu-img.c
-@@ -2977,7 +2977,8 @@ static int img_info(int argc, char **argv)
+@@ -3075,7 +3075,8 @@ static int img_info(int argc, char **argv)
      list = collect_image_info_list(image_opts, filename, fmt, chain,
                                     force_share);
      if (!list) {

debian/patches/pve/0009-PVE-Up-qemu-img-dd-add-osize-and-read-from-to-stdin-.patch

@@ -31,16 +31,17 @@ override the output file's size.
 
 Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
 Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
+Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
 ---
  qemu-img-cmds.hx |   4 +-
- qemu-img.c       | 187 +++++++++++++++++++++++++++++------------------
- 2 files changed, 119 insertions(+), 72 deletions(-)
+ qemu-img.c       | 202 ++++++++++++++++++++++++++++++-----------------
+ 2 files changed, 133 insertions(+), 73 deletions(-)
 
 diff --git a/qemu-img-cmds.hx b/qemu-img-cmds.hx
-index b3620f29e5..e70ef3dc91 100644
+index c9dd70a892..048788b23d 100644
 --- a/qemu-img-cmds.hx
 +++ b/qemu-img-cmds.hx
-@@ -58,9 +58,9 @@ SRST
+@@ -60,9 +60,9 @@ SRST
  ERST
  
  DEF("dd", img_dd,
@@ -53,10 +54,10 @@ index b3620f29e5..e70ef3dc91 100644
  
  DEF("info", img_info,
 diff --git a/qemu-img.c b/qemu-img.c
-index 5dc1d0a2ca..f773182bd0 100644
+index 2575e97b43..8ec68b346f 100644
 --- a/qemu-img.c
 +++ b/qemu-img.c
-@@ -4793,10 +4793,12 @@ static int img_bitmap(int argc, char **argv)
+@@ -4993,10 +4993,12 @@ static int img_bitmap(int argc, char **argv)
  #define C_IF      04
  #define C_OF      010
  #define C_SKIP    020
@@ -69,7 +70,7 @@ index 5dc1d0a2ca..f773182bd0 100644
  };
  
  struct DdIo {
-@@ -4872,6 +4874,19 @@ static int img_dd_skip(const char *arg,
+@@ -5072,6 +5074,19 @@ static int img_dd_skip(const char *arg,
      return 0;
  }
  
@@ -89,7 +90,7 @@ index 5dc1d0a2ca..f773182bd0 100644
  static int img_dd(int argc, char **argv)
  {
      int ret = 0;
-@@ -4912,6 +4927,7 @@ static int img_dd(int argc, char **argv)
+@@ -5112,6 +5127,7 @@ static int img_dd(int argc, char **argv)
          { "if", img_dd_if, C_IF },
          { "of", img_dd_of, C_OF },
          { "skip", img_dd_skip, C_SKIP },
@@ -97,7 +98,7 @@ index 5dc1d0a2ca..f773182bd0 100644
          { NULL, NULL, 0 }
      };
      const struct option long_options[] = {
-@@ -4987,91 +5003,112 @@ static int img_dd(int argc, char **argv)
+@@ -5187,91 +5203,112 @@ static int img_dd(int argc, char **argv)
          arg = NULL;
      }
  
@@ -153,9 +154,9 @@ index 5dc1d0a2ca..f773182bd0 100644
      }
 -    create_opts = qemu_opts_append(create_opts, drv->create_opts);
 -    create_opts = qemu_opts_append(create_opts, proto_drv->create_opts);
- 
--    opts = qemu_opts_create(create_opts, NULL, 0, &error_abort);
 -
+-    opts = qemu_opts_create(create_opts, NULL, 0, &error_abort);
+ 
 -    size = blk_getlength(blk1);
 -    if (size < 0) {
 -        error_report("Failed to get size for '%s'", in.filename);
@@ -274,41 +275,54 @@ index 5dc1d0a2ca..f773182bd0 100644
      }
  
      if (dd.flags & C_SKIP && (in.offset > INT64_MAX / in.bsz ||
-@@ -5089,11 +5126,17 @@ static int img_dd(int argc, char **argv)
+@@ -5288,20 +5325,43 @@ static int img_dd(int argc, char **argv)
+     in.buf = g_new(uint8_t, in.bsz);
  
-     for (out_pos = 0; in_pos < size; block_count++) {
-         int in_ret, out_ret;
+     for (out_pos = 0; in_pos < size; ) {
++        int in_ret, out_ret;
+         int bytes = (in_pos + in.bsz > size) ? size - in_pos : in.bsz;
 -
--        if (in_pos + in.bsz > size) {
--            in_ret = blk_pread(blk1, in_pos, in.buf, size - in_pos);
-+        size_t in_bsz = in_pos + in.bsz > size ? size - in_pos : in.bsz;
+-        ret = blk_pread(blk1, in_pos, bytes, in.buf, 0);
+-        if (ret < 0) {
 +        if (blk1) {
-+            in_ret = blk_pread(blk1, in_pos, in.buf, in_bsz);
-         } else {
--            in_ret = blk_pread(blk1, in_pos, in.buf, in.bsz);
-+            in_ret = read(STDIN_FILENO, in.buf, in_bsz);
++            in_ret = blk_pread(blk1, in_pos, bytes, in.buf, 0);
++            if (in_ret == 0) {
++                in_ret = bytes;
++            }
++        } else {
++            in_ret = read(STDIN_FILENO, in.buf, bytes);
 +            if (in_ret == 0) {
 +                /* early EOF is considered an error */
 +                error_report("Input ended unexpectedly");
 +                ret = -1;
 +                goto out;
 +            }
-         }
-         if (in_ret < 0) {
++        }
++        if (in_ret < 0) {
              error_report("error while reading from input image file: %s",
-@@ -5103,9 +5146,13 @@ static int img_dd(int argc, char **argv)
+-                         strerror(-ret));
++                         strerror(-in_ret));
++            ret = -1;
+             goto out;
          }
-         in_pos += in_ret;
+         in_pos += bytes;
  
--        out_ret = blk_pwrite(blk2, out_pos, in.buf, in_ret, 0);
+-        ret = blk_pwrite(blk2, out_pos, bytes, in.buf, 0);
+-        if (ret < 0) {
 +        if (blk2) {
-+            out_ret = blk_pwrite(blk2, out_pos, in.buf, in_ret, 0);
++            out_ret = blk_pwrite(blk2, out_pos, in_ret, in.buf, 0);
++            if (out_ret == 0) {
++                out_ret = in_ret;
++            }
 +        } else {
 +            out_ret = write(STDOUT_FILENO, in.buf, in_ret);
 +        }
- 
--        if (out_ret < 0) {
++
 +        if (out_ret != in_ret) {
              error_report("error while writing to output image file: %s",
-                          strerror(-out_ret));
-             ret = -1;
+-                         strerror(-ret));
++                         strerror(-out_ret));
++            ret = -1;
+             goto out;
+         }
+         out_pos += bytes;

debian/patches/pve/0010-PVE-Up-qemu-img-dd-add-isize-parameter.patch

@@ -10,15 +10,16 @@ an expected end of input.
 
 Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
 Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
+Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
 ---
  qemu-img.c | 28 +++++++++++++++++++++++++---
  1 file changed, 25 insertions(+), 3 deletions(-)
 
 diff --git a/qemu-img.c b/qemu-img.c
-index f773182bd0..98a6562364 100644
+index 8ec68b346f..b98184bba1 100644
 --- a/qemu-img.c
 +++ b/qemu-img.c
-@@ -4794,11 +4794,13 @@ static int img_bitmap(int argc, char **argv)
+@@ -4994,11 +4994,13 @@ static int img_bitmap(int argc, char **argv)
  #define C_OF      010
  #define C_SKIP    020
  #define C_OSIZE   040
@@ -32,7 +33,7 @@ index f773182bd0..98a6562364 100644
  };
  
  struct DdIo {
-@@ -4887,6 +4889,19 @@ static int img_dd_osize(const char *arg,
+@@ -5087,6 +5089,19 @@ static int img_dd_osize(const char *arg,
      return 0;
  }
  
@@ -52,13 +53,13 @@ index f773182bd0..98a6562364 100644
  static int img_dd(int argc, char **argv)
  {
      int ret = 0;
-@@ -4901,12 +4916,14 @@ static int img_dd(int argc, char **argv)
+@@ -5101,12 +5116,14 @@ static int img_dd(int argc, char **argv)
      int c, i;
      const char *out_fmt = "raw";
      const char *fmt = NULL;
 -    int64_t size = 0;
 +    int64_t size = 0, readsize = 0;
-     int64_t block_count = 0, out_pos, in_pos;
+     int64_t out_pos, in_pos;
      bool force_share = false;
      struct DdInfo dd = {
          .flags = 0,
@@ -68,7 +69,7 @@ index f773182bd0..98a6562364 100644
      };
      struct DdIo in = {
          .bsz = 512, /* Block size is by default 512 bytes */
-@@ -4928,6 +4945,7 @@ static int img_dd(int argc, char **argv)
+@@ -5128,6 +5145,7 @@ static int img_dd(int argc, char **argv)
          { "of", img_dd_of, C_OF },
          { "skip", img_dd_skip, C_SKIP },
          { "osize", img_dd_osize, C_OSIZE },
@@ -76,20 +77,22 @@ index f773182bd0..98a6562364 100644
          { NULL, NULL, 0 }
      };
      const struct option long_options[] = {
-@@ -5124,14 +5142,18 @@ static int img_dd(int argc, char **argv)
+@@ -5324,9 +5342,10 @@ static int img_dd(int argc, char **argv)
  
      in.buf = g_new(uint8_t, in.bsz);
  
--    for (out_pos = 0; in_pos < size; block_count++) {
+-    for (out_pos = 0; in_pos < size; ) {
 +    readsize = (dd.isize > 0) ? dd.isize : size;
-+    for (out_pos = 0; in_pos < readsize; block_count++) {
++    for (out_pos = 0; in_pos < readsize; ) {
          int in_ret, out_ret;
--        size_t in_bsz = in_pos + in.bsz > size ? size - in_pos : in.bsz;
-+        size_t in_bsz = in_pos + in.bsz > readsize ? readsize - in_pos : in.bsz;
+-        int bytes = (in_pos + in.bsz > size) ? size - in_pos : in.bsz;
++        int bytes = (in_pos + in.bsz > readsize) ? readsize - in_pos : in.bsz;
          if (blk1) {
-             in_ret = blk_pread(blk1, in_pos, in.buf, in_bsz);
+             in_ret = blk_pread(blk1, in_pos, bytes, in.buf, 0);
+             if (in_ret == 0) {
+@@ -5335,6 +5354,9 @@ static int img_dd(int argc, char **argv)
          } else {
-             in_ret = read(STDIN_FILENO, in.buf, in_bsz);
+             in_ret = read(STDIN_FILENO, in.buf, bytes);
              if (in_ret == 0) {
 +                if (dd.isize == 0) {
 +                    goto out;

debian/patches/pve/0011-PVE-Up-qemu-img-dd-add-n-skip_create.patch

@@ -0,0 +1,121 @@
+From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
+From: Alexandre Derumier <aderumier@odiso.com>
+Date: Mon, 6 Apr 2020 12:16:42 +0200
+Subject: [PATCH] PVE: [Up] qemu-img dd: add -n skip_create
+
+Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
+[FE: fix getopt-string + add documentation]
+Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
+---
+ docs/tools/qemu-img.rst | 11 ++++++++++-
+ qemu-img-cmds.hx        |  4 ++--
+ qemu-img.c              | 23 ++++++++++++++---------
+ 3 files changed, 26 insertions(+), 12 deletions(-)
+
+diff --git a/docs/tools/qemu-img.rst b/docs/tools/qemu-img.rst
+index 3653adb963..d83e8fb3c0 100644
+--- a/docs/tools/qemu-img.rst
++++ b/docs/tools/qemu-img.rst
+@@ -212,6 +212,10 @@ Parameters to convert subcommand:
+ 
+ Parameters to dd subcommand:
+ 
++.. option:: -n
++
++  Skip the creation of the target volume
++
+ .. program:: qemu-img-dd
+ 
+ .. option:: bs=BLOCK_SIZE
+@@ -492,7 +496,7 @@ Command description:
+   it doesn't need to be specified separately in this case.
+ 
+ 
+-.. option:: dd [--image-opts] [-U] [-f FMT] [-O OUTPUT_FMT] [bs=BLOCK_SIZE] [count=BLOCKS] [skip=BLOCKS] if=INPUT of=OUTPUT
++.. option:: dd [--image-opts] [-U] [-f FMT] [-O OUTPUT_FMT] [-n] [bs=BLOCK_SIZE] [count=BLOCKS] [skip=BLOCKS] if=INPUT of=OUTPUT
+ 
+   dd copies from *INPUT* file to *OUTPUT* file converting it from
+   *FMT* format to *OUTPUT_FMT* format.
+@@ -503,6 +507,11 @@ Command description:
+ 
+   The size syntax is similar to :manpage:`dd(1)`'s size syntax.
+ 
++  If the ``-n`` option is specified, the target volume creation will be
++  skipped. This is useful for formats such as ``rbd`` if the target
++  volume has already been created with site specific options that cannot
++  be supplied through ``qemu-img``.
++
+ .. option:: info [--object OBJECTDEF] [--image-opts] [-f FMT] [--output=OFMT] [--backing-chain] [-U] FILENAME
+ 
+   Give information about the disk image *FILENAME*. Use it in
+diff --git a/qemu-img-cmds.hx b/qemu-img-cmds.hx
+index 048788b23d..0b29a67a06 100644
+--- a/qemu-img-cmds.hx
++++ b/qemu-img-cmds.hx
+@@ -60,9 +60,9 @@ SRST
+ ERST
+ 
+ DEF("dd", img_dd,
+-    "dd [--image-opts] [-U] [-f fmt] [-O output_fmt] [bs=block_size] [count=blocks] [skip=blocks] [osize=output_size] if=input of=output")
++    "dd [--image-opts] [-U] [-f fmt] [-O output_fmt] [-n] [bs=block_size] [count=blocks] [skip=blocks] [osize=output_size] if=input of=output")
+ SRST
+-.. option:: dd [--image-opts] [-U] [-f FMT] [-O OUTPUT_FMT] [bs=BLOCK_SIZE] [count=BLOCKS] [skip=BLOCKS] [osize=OUTPUT_SIZE] if=INPUT of=OUTPUT
++.. option:: dd [--image-opts] [-U] [-f FMT] [-O OUTPUT_FMT] [-n] [bs=BLOCK_SIZE] [count=BLOCKS] [skip=BLOCKS] [osize=OUTPUT_SIZE] if=INPUT of=OUTPUT
+ ERST
+ 
+ DEF("info", img_info,
+diff --git a/qemu-img.c b/qemu-img.c
+index b98184bba1..6fc8384f64 100644
+--- a/qemu-img.c
++++ b/qemu-img.c
+@@ -5118,7 +5118,7 @@ static int img_dd(int argc, char **argv)
+     const char *fmt = NULL;
+     int64_t size = 0, readsize = 0;
+     int64_t out_pos, in_pos;
+-    bool force_share = false;
++    bool force_share = false, skip_create = false;
+     struct DdInfo dd = {
+         .flags = 0,
+         .count = 0,
+@@ -5156,7 +5156,7 @@ static int img_dd(int argc, char **argv)
+         { 0, 0, 0, 0 }
+     };
+ 
+-    while ((c = getopt_long(argc, argv, ":hf:O:U", long_options, NULL))) {
++    while ((c = getopt_long(argc, argv, ":hf:O:Un", long_options, NULL))) {
+         if (c == EOF) {
+             break;
+         }
+@@ -5176,6 +5176,9 @@ static int img_dd(int argc, char **argv)
+         case 'h':
+             help();
+             break;
++        case 'n':
++            skip_create = true;
++            break;
+         case 'U':
+             force_share = true;
+             break;
+@@ -5306,13 +5309,15 @@ static int img_dd(int argc, char **argv)
+                                 size - in.bsz * in.offset, &error_abort);
+         }
+ 
+-        ret = bdrv_create(drv, out.filename, opts, &local_err);
+-        if (ret < 0) {
+-            error_reportf_err(local_err,
+-                              "%s: error while creating output image: ",
+-                              out.filename);
+-            ret = -1;
+-            goto out;
++        if (!skip_create) {
++            ret = bdrv_create(drv, out.filename, opts, &local_err);
++            if (ret < 0) {
++                error_reportf_err(local_err,
++                                  "%s: error while creating output image: ",
++                                  out.filename);
++                ret = -1;
++                goto out;
++            }
+         }
+ 
+         /* TODO, we can't honour --image-opts for the target,

debian/patches/pve/0012-PVE-Up-qemu-img-dd-add-n-skip_create.patch

@@ -1,65 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Alexandre Derumier <aderumier@odiso.com>
-Date: Mon, 6 Apr 2020 12:16:42 +0200
-Subject: [PATCH] PVE: [Up] qemu-img dd: add -n skip_create
-
-Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
----
- qemu-img.c | 23 ++++++++++++++---------
- 1 file changed, 14 insertions(+), 9 deletions(-)
-
-diff --git a/qemu-img.c b/qemu-img.c
-index 98a6562364..355b3b82f4 100644
---- a/qemu-img.c
-+++ b/qemu-img.c
-@@ -4918,7 +4918,7 @@ static int img_dd(int argc, char **argv)
-     const char *fmt = NULL;
-     int64_t size = 0, readsize = 0;
-     int64_t block_count = 0, out_pos, in_pos;
--    bool force_share = false;
-+    bool force_share = false, skip_create = false;
-     struct DdInfo dd = {
-         .flags = 0,
-         .count = 0,
-@@ -4956,7 +4956,7 @@ static int img_dd(int argc, char **argv)
-         { 0, 0, 0, 0 }
-     };
- 
--    while ((c = getopt_long(argc, argv, ":hf:O:U", long_options, NULL))) {
-+    while ((c = getopt_long(argc, argv, ":hf:O:U:n", long_options, NULL))) {
-         if (c == EOF) {
-             break;
-         }
-@@ -4976,6 +4976,9 @@ static int img_dd(int argc, char **argv)
-         case 'h':
-             help();
-             break;
-+        case 'n':
-+            skip_create = true;
-+            break;
-         case 'U':
-             force_share = true;
-             break;
-@@ -5106,13 +5109,15 @@ static int img_dd(int argc, char **argv)
-                                 size - in.bsz * in.offset, &error_abort);
-         }
- 
--        ret = bdrv_create(drv, out.filename, opts, &local_err);
--        if (ret < 0) {
--            error_reportf_err(local_err,
--                              "%s: error while creating output image: ",
--                              out.filename);
--            ret = -1;
--            goto out;
-+        if (!skip_create) {
-+            ret = bdrv_create(drv, out.filename, opts, &local_err);
-+            if (ret < 0) {
-+                error_reportf_err(local_err,
-+                                  "%s: error while creating output image: ",
-+                                  out.filename);
-+                ret = -1;
-+                goto out;
-+            }
-         }
- 
-         /* TODO, we can't honour --image-opts for the target,

debian/patches/pve/0012-qemu-img-dd-add-l-option-for-loading-a-snapshot.patch

@@ -0,0 +1,130 @@
+From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
+From: Fabian Ebner <f.ebner@proxmox.com>
+Date: Mon, 7 Feb 2022 14:21:01 +0100
+Subject: [PATCH] qemu-img dd: add -l option for loading a snapshot
+
+Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
+Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
+---
+ docs/tools/qemu-img.rst |  6 +++---
+ qemu-img-cmds.hx        |  4 ++--
+ qemu-img.c              | 33 +++++++++++++++++++++++++++++++--
+ 3 files changed, 36 insertions(+), 7 deletions(-)
+
+diff --git a/docs/tools/qemu-img.rst b/docs/tools/qemu-img.rst
+index d83e8fb3c0..61c6b21859 100644
+--- a/docs/tools/qemu-img.rst
++++ b/docs/tools/qemu-img.rst
+@@ -496,10 +496,10 @@ Command description:
+   it doesn't need to be specified separately in this case.
+ 
+ 
+-.. option:: dd [--image-opts] [-U] [-f FMT] [-O OUTPUT_FMT] [-n] [bs=BLOCK_SIZE] [count=BLOCKS] [skip=BLOCKS] if=INPUT of=OUTPUT
++.. option:: dd [--image-opts] [-U] [-f FMT] [-O OUTPUT_FMT] [-n] [-l SNAPSHOT_PARAM] [bs=BLOCK_SIZE] [count=BLOCKS] [skip=BLOCKS] if=INPUT of=OUTPUT
+ 
+-  dd copies from *INPUT* file to *OUTPUT* file converting it from
+-  *FMT* format to *OUTPUT_FMT* format.
++  dd copies from *INPUT* file or snapshot *SNAPSHOT_PARAM* to *OUTPUT* file
++  converting it from *FMT* format to *OUTPUT_FMT* format.
+ 
+   The data is by default read and written using blocks of 512 bytes but can be
+   modified by specifying *BLOCK_SIZE*. If count=\ *BLOCKS* is specified
+diff --git a/qemu-img-cmds.hx b/qemu-img-cmds.hx
+index 0b29a67a06..758f397232 100644
+--- a/qemu-img-cmds.hx
++++ b/qemu-img-cmds.hx
+@@ -60,9 +60,9 @@ SRST
+ ERST
+ 
+ DEF("dd", img_dd,
+-    "dd [--image-opts] [-U] [-f fmt] [-O output_fmt] [-n] [bs=block_size] [count=blocks] [skip=blocks] [osize=output_size] if=input of=output")
++    "dd [--image-opts] [-U] [-f fmt] [-O output_fmt] [-n] [-l snapshot_param] [bs=block_size] [count=blocks] [skip=blocks] [osize=output_size] if=input of=output")
+ SRST
+-.. option:: dd [--image-opts] [-U] [-f FMT] [-O OUTPUT_FMT] [-n] [bs=BLOCK_SIZE] [count=BLOCKS] [skip=BLOCKS] [osize=OUTPUT_SIZE] if=INPUT of=OUTPUT
++.. option:: dd [--image-opts] [-U] [-f FMT] [-O OUTPUT_FMT] [-n] [-l SNAPSHOT_PARAM] [bs=BLOCK_SIZE] [count=BLOCKS] [skip=BLOCKS] [osize=OUTPUT_SIZE] if=INPUT of=OUTPUT
+ ERST
+ 
+ DEF("info", img_info,
+diff --git a/qemu-img.c b/qemu-img.c
+index 6fc8384f64..a6c88e0860 100644
+--- a/qemu-img.c
++++ b/qemu-img.c
+@@ -5110,6 +5110,7 @@ static int img_dd(int argc, char **argv)
+     BlockDriver *drv = NULL, *proto_drv = NULL;
+     BlockBackend *blk1 = NULL, *blk2 = NULL;
+     QemuOpts *opts = NULL;
++    QemuOpts *sn_opts = NULL;
+     QemuOptsList *create_opts = NULL;
+     Error *local_err = NULL;
+     bool image_opts = false;
+@@ -5119,6 +5120,7 @@ static int img_dd(int argc, char **argv)
+     int64_t size = 0, readsize = 0;
+     int64_t out_pos, in_pos;
+     bool force_share = false, skip_create = false;
++    const char *snapshot_name = NULL;
+     struct DdInfo dd = {
+         .flags = 0,
+         .count = 0,
+@@ -5156,7 +5158,7 @@ static int img_dd(int argc, char **argv)
+         { 0, 0, 0, 0 }
+     };
+ 
+-    while ((c = getopt_long(argc, argv, ":hf:O:Un", long_options, NULL))) {
++    while ((c = getopt_long(argc, argv, ":hf:O:l:Un", long_options, NULL))) {
+         if (c == EOF) {
+             break;
+         }
+@@ -5179,6 +5181,19 @@ static int img_dd(int argc, char **argv)
+         case 'n':
+             skip_create = true;
+             break;
++        case 'l':
++            if (strstart(optarg, SNAPSHOT_OPT_BASE, NULL)) {
++                sn_opts = qemu_opts_parse_noisily(&internal_snapshot_opts,
++                                                  optarg, false);
++                if (!sn_opts) {
++                    error_report("Failed in parsing snapshot param '%s'",
++                                 optarg);
++                    goto out;
++                }
++            } else {
++                snapshot_name = optarg;
++            }
++            break;
+         case 'U':
+             force_share = true;
+             break;
+@@ -5238,11 +5253,24 @@ static int img_dd(int argc, char **argv)
+     if (dd.flags & C_IF) {
+         blk1 = img_open(image_opts, in.filename, fmt, 0, false, false,
+                         force_share);
+-
+         if (!blk1) {
+             ret = -1;
+             goto out;
+         }
++        if (sn_opts) {
++            bdrv_snapshot_load_tmp(blk_bs(blk1),
++                                   qemu_opt_get(sn_opts, SNAPSHOT_OPT_ID),
++                                   qemu_opt_get(sn_opts, SNAPSHOT_OPT_NAME),
++                                   &local_err);
++        } else if (snapshot_name != NULL) {
++            bdrv_snapshot_load_tmp_by_id_or_name(blk_bs(blk1), snapshot_name,
++                                                 &local_err);
++        }
++        if (local_err) {
++            error_reportf_err(local_err, "Failed to load snapshot: ");
++            ret = -1;
++            goto out;
++        }
+     }
+ 
+     if (dd.flags & C_OSIZE) {
+@@ -5397,6 +5425,7 @@ static int img_dd(int argc, char **argv)
+ out:
+     g_free(arg);
+     qemu_opts_del(opts);
++    qemu_opts_del(sn_opts);
+     qemu_opts_free(create_opts);
+     blk_unref(blk1);
+     blk_unref(blk2);

debian/patches/pve/0013-PVE-virtio-balloon-improve-query-balloon.patch

@@ -7,17 +7,62 @@ Actually provide memory information via the query-balloon
 command.
 
 Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
+[FE: add BalloonInfo to member name exceptions list
+     rebase for 8.0 - moved to hw/core/machine-hmp-cmds.c]
+Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
 ---
+ hw/core/machine-hmp-cmds.c | 30 +++++++++++++++++++++++++++++-
  hw/virtio/virtio-balloon.c | 33 +++++++++++++++++++++++++++++++--
- monitor/hmp-cmds.c         | 30 +++++++++++++++++++++++++++++-
  qapi/machine.json          | 22 +++++++++++++++++++++-
- 3 files changed, 81 insertions(+), 4 deletions(-)
+ qapi/pragma.json           |  1 +
+ 4 files changed, 82 insertions(+), 4 deletions(-)
 
+diff --git a/hw/core/machine-hmp-cmds.c b/hw/core/machine-hmp-cmds.c
+index 8701f00cc7..3b4c5ef403 100644
+--- a/hw/core/machine-hmp-cmds.c
++++ b/hw/core/machine-hmp-cmds.c
+@@ -179,7 +179,35 @@ void hmp_info_balloon(Monitor *mon, const QDict *qdict)
+         return;
+     }
+ 
+-    monitor_printf(mon, "balloon: actual=%" PRId64 "\n", info->actual >> 20);
++    monitor_printf(mon, "balloon: actual=%" PRId64, info->actual >> 20);
++    monitor_printf(mon, " max_mem=%" PRId64, info->max_mem >> 20);
++    if (info->has_total_mem) {
++        monitor_printf(mon, " total_mem=%" PRId64, info->total_mem >> 20);
++    }
++    if (info->has_free_mem) {
++        monitor_printf(mon, " free_mem=%" PRId64, info->free_mem >> 20);
++    }
++
++    if (info->has_mem_swapped_in) {
++        monitor_printf(mon, " mem_swapped_in=%" PRId64, info->mem_swapped_in);
++    }
++    if (info->has_mem_swapped_out) {
++        monitor_printf(mon, " mem_swapped_out=%" PRId64, info->mem_swapped_out);
++    }
++    if (info->has_major_page_faults) {
++        monitor_printf(mon, " major_page_faults=%" PRId64,
++                       info->major_page_faults);
++    }
++    if (info->has_minor_page_faults) {
++        monitor_printf(mon, " minor_page_faults=%" PRId64,
++                       info->minor_page_faults);
++    }
++    if (info->has_last_update) {
++        monitor_printf(mon, " last_update=%" PRId64,
++                       info->last_update);
++    }
++
++    monitor_printf(mon, "\n");
+ 
+     qapi_free_BalloonInfo(info);
+ }
 diff --git a/hw/virtio/virtio-balloon.c b/hw/virtio/virtio-balloon.c
-index 4b5d9e5e50..fddb5a4b82 100644
+index 609e39a821..8cb6dfcac3 100644
 --- a/hw/virtio/virtio-balloon.c
 +++ b/hw/virtio/virtio-balloon.c
-@@ -807,8 +807,37 @@ static uint64_t virtio_balloon_get_features(VirtIODevice *vdev, uint64_t f,
+@@ -781,8 +781,37 @@ static uint64_t virtio_balloon_get_features(VirtIODevice *vdev, uint64_t f,
  static void virtio_balloon_stat(void *opaque, BalloonInfo *info)
  {
      VirtIOBalloon *dev = opaque;
@@ -57,54 +102,13 @@ index 4b5d9e5e50..fddb5a4b82 100644
  }
  
  static void virtio_balloon_to_target(void *opaque, ram_addr_t target)
-diff --git a/monitor/hmp-cmds.c b/monitor/hmp-cmds.c
-index e00255f7ee..f528055cb6 100644
---- a/monitor/hmp-cmds.c
-+++ b/monitor/hmp-cmds.c
-@@ -698,7 +698,35 @@ void hmp_info_balloon(Monitor *mon, const QDict *qdict)
-         return;
-     }
- 
--    monitor_printf(mon, "balloon: actual=%" PRId64 "\n", info->actual >> 20);
-+    monitor_printf(mon, "balloon: actual=%" PRId64, info->actual >> 20);
-+    monitor_printf(mon, " max_mem=%" PRId64, info->max_mem >> 20);
-+    if (info->has_total_mem) {
-+        monitor_printf(mon, " total_mem=%" PRId64, info->total_mem >> 20);
-+    }
-+    if (info->has_free_mem) {
-+        monitor_printf(mon, " free_mem=%" PRId64, info->free_mem >> 20);
-+    }
-+
-+    if (info->has_mem_swapped_in) {
-+        monitor_printf(mon, " mem_swapped_in=%" PRId64, info->mem_swapped_in);
-+    }
-+    if (info->has_mem_swapped_out) {
-+        monitor_printf(mon, " mem_swapped_out=%" PRId64, info->mem_swapped_out);
-+    }
-+    if (info->has_major_page_faults) {
-+        monitor_printf(mon, " major_page_faults=%" PRId64,
-+                       info->major_page_faults);
-+    }
-+    if (info->has_minor_page_faults) {
-+        monitor_printf(mon, " minor_page_faults=%" PRId64,
-+                       info->minor_page_faults);
-+    }
-+    if (info->has_last_update) {
-+        monitor_printf(mon, " last_update=%" PRId64,
-+                       info->last_update);
-+    }
-+
-+    monitor_printf(mon, "\n");
- 
-     qapi_free_BalloonInfo(info);
- }
 diff --git a/qapi/machine.json b/qapi/machine.json
-index 157712f006..34035c25d1 100644
+index d4317435e7..db8ed2e357 100644
 --- a/qapi/machine.json
 +++ b/qapi/machine.json
-@@ -1018,10 +1018,30 @@
- # @actual: the logical size of the VM in bytes
- #          Formula used: logical_vm_size = vm_ram_size - balloon_size
+@@ -1164,9 +1164,29 @@
+ # @actual: the logical size of the VM in bytes Formula used:
+ #     logical_vm_size = vm_ram_size - balloon_size
  #
 +# @last_update: time when stats got updated from guest
 +#
@@ -123,7 +127,6 @@ index 157712f006..34035c25d1 100644
 +# @max_mem: amount of memory (in bytes) assigned to the guest
 +#
  # Since: 0.14
- #
  ##
 -{ 'struct': 'BalloonInfo', 'data': {'actual': 'int' } }
 +{ 'struct': 'BalloonInfo',
@@ -134,3 +137,15 @@ index 157712f006..34035c25d1 100644
  
  ##
  # @query-balloon:
+diff --git a/qapi/pragma.json b/qapi/pragma.json
+index 59fbe74b8c..be8fa304c5 100644
+--- a/qapi/pragma.json
++++ b/qapi/pragma.json
+@@ -90,6 +90,7 @@
+     'member-name-exceptions': [     # visible in:
+         'ACPISlotType',             # query-acpi-ospm-status
+         'AcpiTableOptions',         # -acpitable
++        'BalloonInfo',              # query-balloon
+         'BlkdebugEvent',            # blockdev-add, -blockdev
+         'BlkdebugSetStateOptions',  # blockdev-add, -blockdev
+         'BlockDeviceInfo',          # query-block

debian/patches/pve/0014-PVE-qapi-modify-query-machines.patch

@@ -13,13 +13,13 @@ Signed-off-by: Dietmar Maurer <dietmar@proxmox.com>
  2 files changed, 9 insertions(+), 1 deletion(-)
 
 diff --git a/hw/core/machine-qmp-cmds.c b/hw/core/machine-qmp-cmds.c
-index 216fdfaf3a..8f8d5d5276 100644
+index 130217da8f..52a6d74820 100644
 --- a/hw/core/machine-qmp-cmds.c
 +++ b/hw/core/machine-qmp-cmds.c
-@@ -98,6 +98,12 @@ MachineInfoList *qmp_query_machines(Error **errp)
-         info->hotpluggable_cpus = mc->has_hotpluggable_cpus;
+@@ -90,6 +90,12 @@ MachineInfoList *qmp_query_machines(bool has_compat_props, bool compat_props,
          info->numa_mem_supported = mc->numa_mem_supported;
          info->deprecated = !!mc->deprecation_reason;
+         info->acpi = !!object_class_property_find(OBJECT_CLASS(mc), "acpi");
 +
 +        if (strcmp(mc->name, MACHINE_GET_CLASS(current_machine)->name) == 0) {
 +            info->has_is_current = true;
@@ -28,21 +28,21 @@ index 216fdfaf3a..8f8d5d5276 100644
 +
          if (mc->default_cpu_type) {
              info->default_cpu_type = g_strdup(mc->default_cpu_type);
-             info->has_default_cpu_type = true;
+         }
 diff --git a/qapi/machine.json b/qapi/machine.json
-index 34035c25d1..cf120ac343 100644
+index db8ed2e357..0c703316f5 100644
 --- a/qapi/machine.json
 +++ b/qapi/machine.json
-@@ -141,6 +141,8 @@
+@@ -168,6 +168,8 @@
  #
  # @is-default: whether the machine is default
  #
 +# @is-current: whether this machine is currently used
 +#
  # @cpu-max: maximum number of CPUs supported by the machine type
- #           (since 1.5)
+ #     (since 1.5)
  #
-@@ -162,7 +164,7 @@
+@@ -200,7 +202,7 @@
  ##
  { 'struct': 'MachineInfo',
    'data': { 'name': 'str', '*alias': 'str',
@@ -50,4 +50,4 @@ index 34035c25d1..cf120ac343 100644
 +            '*is-default': 'bool', '*is-current': 'bool', 'cpu-max': 'int',
              'hotpluggable-cpus': 'bool',  'numa-mem-supported': 'bool',
              'deprecated': 'bool', '*default-cpu-type': 'str',
-             '*default-ram-id': 'str' } }
+             '*default-ram-id': 'str', 'acpi': 'bool',

debian/patches/pve/0015-PVE-qapi-modify-spice-query.patch

@@ -6,16 +6,18 @@ Subject: [PATCH] PVE: qapi: modify spice query
 Provide the last ticket in the SpiceInfo struct optionally.
 
 Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
+[FE: adapt to QAPI change]
+Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
 ---
  qapi/ui.json    | 3 +++
- ui/spice-core.c | 5 +++++
- 2 files changed, 8 insertions(+)
+ ui/spice-core.c | 4 ++++
+ 2 files changed, 7 insertions(+)
 
 diff --git a/qapi/ui.json b/qapi/ui.json
-index fd9677d48e..4497bb9c1f 100644
+index 8c8464faac..cebda37f8f 100644
 --- a/qapi/ui.json
 +++ b/qapi/ui.json
-@@ -216,11 +216,14 @@
+@@ -312,11 +312,14 @@
  #
  # @channels: a list of @SpiceChannel for each active spice channel
  #
@@ -28,18 +30,17 @@ index fd9677d48e..4497bb9c1f 100644
             '*tls-port': 'int', '*auth': 'str', '*compiled-version': 'str',
 +           '*ticket': 'str',
             'mouse-mode': 'SpiceQueryMouseMode', '*channels': ['SpiceChannel']},
-   'if': 'defined(CONFIG_SPICE)' }
+   'if': 'CONFIG_SPICE' }
  
 diff --git a/ui/spice-core.c b/ui/spice-core.c
-index 840cf56923..96be349635 100644
+index ea20e6153c..55a15fba8b 100644
 --- a/ui/spice-core.c
 +++ b/ui/spice-core.c
-@@ -534,6 +534,11 @@ static SpiceInfo *qmp_query_spice_real(Error **errp)
+@@ -548,6 +548,10 @@ static SpiceInfo *qmp_query_spice_real(Error **errp)
      micro = SPICE_SERVER_VERSION & 0xff;
      info->compiled_version = g_strdup_printf("%d.%d.%d", major, minor, micro);
  
 +    if (auth_passwd) {
-+        info->has_ticket = true;
 +        info->ticket =  g_strdup(auth_passwd);
 +    }
 +

debian/patches/pve/0016-PVE-add-IOChannel-implementation-for-savevm-async.patch

@@ -0,0 +1,284 @@
+From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
+From: Fiona Ebner <f.ebner@proxmox.com>
+Date: Thu, 13 Oct 2022 11:33:50 +0200
+Subject: [PATCH] PVE: add IOChannel implementation for savevm-async
+
+based on migration/channel-block.c and the implementation that was
+present in migration/savevm-async.c before QEMU 7.1.
+
+Passes along read/write requests to the given BlockBackend, while
+ensuring that a read request going beyond the end results in a
+graceful short read.
+
+Additionally, allows tracking the current position from the outside
+(intended to be used for progress tracking).
+
+Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
+Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
+---
+ migration/channel-savevm-async.c | 184 +++++++++++++++++++++++++++++++
+ migration/channel-savevm-async.h |  51 +++++++++
+ migration/meson.build            |   1 +
+ 3 files changed, 236 insertions(+)
+ create mode 100644 migration/channel-savevm-async.c
+ create mode 100644 migration/channel-savevm-async.h
+
+diff --git a/migration/channel-savevm-async.c b/migration/channel-savevm-async.c
+new file mode 100644
+index 0000000000..081a192f49
+--- /dev/null
++++ b/migration/channel-savevm-async.c
+@@ -0,0 +1,184 @@
++/*
++ * QIO Channel implementation to be used by savevm-async QMP calls
++ */
++#include "qemu/osdep.h"
++#include "migration/channel-savevm-async.h"
++#include "qapi/error.h"
++#include "sysemu/block-backend.h"
++#include "trace.h"
++
++QIOChannelSavevmAsync *
++qio_channel_savevm_async_new(BlockBackend *be, size_t *bs_pos)
++{
++    QIOChannelSavevmAsync *ioc;
++
++    ioc = QIO_CHANNEL_SAVEVM_ASYNC(object_new(TYPE_QIO_CHANNEL_SAVEVM_ASYNC));
++
++    bdrv_ref(blk_bs(be));
++    ioc->be = be;
++    ioc->bs_pos = bs_pos;
++
++    return ioc;
++}
++
++
++static void
++qio_channel_savevm_async_finalize(Object *obj)
++{
++    QIOChannelSavevmAsync *ioc = QIO_CHANNEL_SAVEVM_ASYNC(obj);
++
++    if (ioc->be) {
++        bdrv_unref(blk_bs(ioc->be));
++        ioc->be = NULL;
++    }
++    ioc->bs_pos = NULL;
++}
++
++
++static ssize_t
++qio_channel_savevm_async_readv(QIOChannel *ioc,
++                               const struct iovec *iov,
++                               size_t niov,
++                               int **fds,
++                               size_t *nfds,
++                               int flags,
++                               Error **errp)
++{
++    QIOChannelSavevmAsync *saioc = QIO_CHANNEL_SAVEVM_ASYNC(ioc);
++    BlockBackend *be = saioc->be;
++    int64_t maxlen = blk_getlength(be);
++    QEMUIOVector qiov;
++    size_t size;
++    int ret;
++
++    qemu_iovec_init_external(&qiov, (struct iovec *)iov, niov);
++
++    if (*saioc->bs_pos >= maxlen) {
++        error_setg(errp, "cannot read beyond maxlen");
++        return -1;
++    }
++
++    if (maxlen - *saioc->bs_pos < qiov.size) {
++        size = maxlen - *saioc->bs_pos;
++    } else {
++        size = qiov.size;
++    }
++
++    // returns 0 on success
++    ret = blk_preadv(be, *saioc->bs_pos, size, &qiov, 0);
++    if (ret < 0) {
++        error_setg_errno(errp, -ret, "blk_preadv failed");
++        return -1;
++    }
++
++    *saioc->bs_pos += size;
++    return size;
++}
++
++
++static ssize_t
++qio_channel_savevm_async_writev(QIOChannel *ioc,
++                                const struct iovec *iov,
++                                size_t niov,
++                                int *fds,
++                                size_t nfds,
++                                int flags,
++                                Error **errp)
++{
++    QIOChannelSavevmAsync *saioc = QIO_CHANNEL_SAVEVM_ASYNC(ioc);
++    BlockBackend *be = saioc->be;
++    QEMUIOVector qiov;
++    int ret;
++
++    qemu_iovec_init_external(&qiov, (struct iovec *)iov, niov);
++
++    if (qemu_in_coroutine()) {
++        ret = blk_co_pwritev(be, *saioc->bs_pos, qiov.size, &qiov, 0);
++        aio_wait_kick();
++    } else {
++        ret = blk_pwritev(be, *saioc->bs_pos, qiov.size, &qiov, 0);
++    }
++
++    if (ret < 0) {
++        error_setg_errno(errp, -ret, "blk(_co)_pwritev failed");
++        return -1;
++    }
++
++    *saioc->bs_pos += qiov.size;
++    return qiov.size;
++}
++
++
++static int
++qio_channel_savevm_async_set_blocking(QIOChannel *ioc,
++                                      bool enabled,
++                                      Error **errp)
++{
++    if (!enabled) {
++        error_setg(errp, "Non-blocking mode not supported for savevm-async");
++        return -1;
++    }
++    return 0;
++}
++
++
++static int
++qio_channel_savevm_async_close(QIOChannel *ioc,
++                               Error **errp)
++{
++    QIOChannelSavevmAsync *saioc = QIO_CHANNEL_SAVEVM_ASYNC(ioc);
++    int rv = bdrv_flush(blk_bs(saioc->be));
++
++    if (rv < 0) {
++        error_setg_errno(errp, -rv, "Unable to flush VMState");
++        return -1;
++    }
++
++    bdrv_unref(blk_bs(saioc->be));
++    saioc->be = NULL;
++    saioc->bs_pos = NULL;
++
++    return 0;
++}
++
++
++static void
++qio_channel_savevm_async_set_aio_fd_handler(QIOChannel *ioc,
++                                            AioContext *read_ctx,
++                                            IOHandler *io_read,
++                                            AioContext *write_ctx,
++                                            IOHandler *io_write,
++                                            void *opaque)
++{
++    // if channel-block starts doing something, check if this needs adaptation
++}
++
++
++static void
++qio_channel_savevm_async_class_init(ObjectClass *klass,
++                             void *class_data G_GNUC_UNUSED)
++{
++    QIOChannelClass *ioc_klass = QIO_CHANNEL_CLASS(klass);
++
++    ioc_klass->io_writev = qio_channel_savevm_async_writev;
++    ioc_klass->io_readv = qio_channel_savevm_async_readv;
++    ioc_klass->io_set_blocking = qio_channel_savevm_async_set_blocking;
++    ioc_klass->io_close = qio_channel_savevm_async_close;
++    ioc_klass->io_set_aio_fd_handler = qio_channel_savevm_async_set_aio_fd_handler;
++}
++
++static const TypeInfo qio_channel_savevm_async_info = {
++    .parent = TYPE_QIO_CHANNEL,
++    .name = TYPE_QIO_CHANNEL_SAVEVM_ASYNC,
++    .instance_size = sizeof(QIOChannelSavevmAsync),
++    .instance_finalize = qio_channel_savevm_async_finalize,
++    .class_init = qio_channel_savevm_async_class_init,
++};
++
++static void
++qio_channel_savevm_async_register_types(void)
++{
++    type_register_static(&qio_channel_savevm_async_info);
++}
++
++type_init(qio_channel_savevm_async_register_types);
+diff --git a/migration/channel-savevm-async.h b/migration/channel-savevm-async.h
+new file mode 100644
+index 0000000000..17ae2cb261
+--- /dev/null
++++ b/migration/channel-savevm-async.h
+@@ -0,0 +1,51 @@
++/*
++ * QEMU I/O channels driver for savevm-async.c
++ *
++ * Copyright (c) 2022 Proxmox Server Solutions
++ *
++ * Authors:
++ *  Fiona Ebner (f.ebner@proxmox.com)
++ *
++ * This work is licensed under the terms of the GNU GPL, version 2 or later.
++ * See the COPYING file in the top-level directory.
++ */
++
++#ifndef QIO_CHANNEL_SAVEVM_ASYNC_H
++#define QIO_CHANNEL_SAVEVM_ASYNC_H
++
++#include "io/channel.h"
++#include "qom/object.h"
++
++#define TYPE_QIO_CHANNEL_SAVEVM_ASYNC "qio-channel-savevm-async"
++OBJECT_DECLARE_SIMPLE_TYPE(QIOChannelSavevmAsync, QIO_CHANNEL_SAVEVM_ASYNC)
++
++
++/**
++ * QIOChannelSavevmAsync:
++ *
++ * The QIOChannelBlock object provides a channel implementation that is able to
++ * perform I/O on any BlockBackend whose BlockDriverState directly contains a
++ * VMState (as opposed to indirectly, like qcow2). It allows tracking the
++ * current position from the outside.
++ */
++struct QIOChannelSavevmAsync {
++    QIOChannel parent;
++    BlockBackend *be;
++    size_t *bs_pos;
++};
++
++
++/**
++ * qio_channel_savevm_async_new:
++ * @be: the block backend
++ * @bs_pos: used to keep track of the IOChannels current position
++ *
++ * Create a new IO channel object that can perform I/O on a BlockBackend object
++ * whose BlockDriverState directly contains a VMState.
++ *
++ * Returns: the new channel object
++ */
++QIOChannelSavevmAsync *
++qio_channel_savevm_async_new(BlockBackend *be, size_t *bs_pos);
++
++#endif /* QIO_CHANNEL_SAVEVM_ASYNC_H */
+diff --git a/migration/meson.build b/migration/meson.build
+index 5ce2acb41e..020127d901 100644
+--- a/migration/meson.build
++++ b/migration/meson.build
+@@ -13,6 +13,7 @@ system_ss.add(files(
+   'block-dirty-bitmap.c',
+   'channel.c',
+   'channel-block.c',
++  'channel-savevm-async.c',
+   'dirtyrate.c',
+   'exec.c',
+   'fd.c',

debian/patches/pve/0017-PVE-add-optional-buffer-size-to-QEMUFile.patch

@@ -1,187 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Wolfgang Bumiller <w.bumiller@proxmox.com>
-Date: Mon, 4 May 2020 11:05:08 +0200
-Subject: [PATCH] PVE: add optional buffer size to QEMUFile
-
-So we can use a 4M buffer for savevm-async which should
-increase performance storing the state onto ceph.
-
-Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
-[increase max IOV count in QEMUFile to actually write more data]
-Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
----
- migration/qemu-file.c    | 38 +++++++++++++++++++++++++-------------
- migration/qemu-file.h    |  1 +
- migration/savevm-async.c |  4 ++--
- 3 files changed, 28 insertions(+), 15 deletions(-)
-
-diff --git a/migration/qemu-file.c b/migration/qemu-file.c
-index 6338d8e2ff..6697a93a7e 100644
---- a/migration/qemu-file.c
-+++ b/migration/qemu-file.c
-@@ -30,8 +30,8 @@
- #include "trace.h"
- #include "qapi/error.h"
- 
--#define IO_BUF_SIZE 32768
--#define MAX_IOV_SIZE MIN_CONST(IOV_MAX, 64)
-+#define DEFAULT_IO_BUF_SIZE 32768
-+#define MAX_IOV_SIZE MIN_CONST(IOV_MAX, 256)
- 
- struct QEMUFile {
-     const QEMUFileOps *ops;
-@@ -45,7 +45,8 @@ struct QEMUFile {
-                     when reading */
-     int buf_index;
-     int buf_size; /* 0 when writing */
--    uint8_t buf[IO_BUF_SIZE];
-+    size_t buf_allocated_size;
-+    uint8_t *buf;
- 
-     DECLARE_BITMAP(may_free, MAX_IOV_SIZE);
-     struct iovec iov[MAX_IOV_SIZE];
-@@ -103,7 +104,7 @@ bool qemu_file_mode_is_not_valid(const char *mode)
-     return false;
- }
- 
--QEMUFile *qemu_fopen_ops(void *opaque, const QEMUFileOps *ops, bool has_ioc)
-+QEMUFile *qemu_fopen_ops_sized(void *opaque, const QEMUFileOps *ops, bool has_ioc, size_t buffer_size)
- {
-     QEMUFile *f;
- 
-@@ -112,9 +113,17 @@ QEMUFile *qemu_fopen_ops(void *opaque, const QEMUFileOps *ops, bool has_ioc)
-     f->opaque = opaque;
-     f->ops = ops;
-     f->has_ioc = has_ioc;
-+    f->buf_allocated_size = buffer_size;
-+    f->buf = malloc(buffer_size);
-+
-     return f;
- }
- 
-+QEMUFile *qemu_fopen_ops(void *opaque, const QEMUFileOps *ops, bool has_ioc)
-+{
-+    return qemu_fopen_ops_sized(opaque, ops, has_ioc, DEFAULT_IO_BUF_SIZE);
-+}
-+
- 
- void qemu_file_set_hooks(QEMUFile *f, const QEMUFileHooks *hooks)
- {
-@@ -349,7 +358,7 @@ static ssize_t qemu_fill_buffer(QEMUFile *f)
-     }
- 
-     len = f->ops->get_buffer(f->opaque, f->buf + pending, f->pos,
--                             IO_BUF_SIZE - pending, &local_error);
-+                             f->buf_allocated_size - pending, &local_error);
-     if (len > 0) {
-         f->buf_size += len;
-         f->pos += len;
-@@ -389,6 +398,9 @@ int qemu_fclose(QEMUFile *f)
-             ret = ret2;
-         }
-     }
-+
-+    free(f->buf);
-+
-     /* If any error was spotted before closing, we should report it
-      * instead of the close() return value.
-      */
-@@ -443,7 +455,7 @@ static void add_buf_to_iovec(QEMUFile *f, size_t len)
- {
-     if (!add_to_iovec(f, f->buf + f->buf_index, len, false)) {
-         f->buf_index += len;
--        if (f->buf_index == IO_BUF_SIZE) {
-+        if (f->buf_index == f->buf_allocated_size) {
-             qemu_fflush(f);
-         }
-     }
-@@ -469,7 +481,7 @@ void qemu_put_buffer(QEMUFile *f, const uint8_t *buf, size_t size)
-     }
- 
-     while (size > 0) {
--        l = IO_BUF_SIZE - f->buf_index;
-+        l = f->buf_allocated_size - f->buf_index;
-         if (l > size) {
-             l = size;
-         }
-@@ -516,8 +528,8 @@ size_t qemu_peek_buffer(QEMUFile *f, uint8_t **buf, size_t size, size_t offset)
-     size_t index;
- 
-     assert(!qemu_file_is_writable(f));
--    assert(offset < IO_BUF_SIZE);
--    assert(size <= IO_BUF_SIZE - offset);
-+    assert(offset < f->buf_allocated_size);
-+    assert(size <= f->buf_allocated_size - offset);
- 
-     /* The 1st byte to read from */
-     index = f->buf_index + offset;
-@@ -567,7 +579,7 @@ size_t qemu_get_buffer(QEMUFile *f, uint8_t *buf, size_t size)
-         size_t res;
-         uint8_t *src;
- 
--        res = qemu_peek_buffer(f, &src, MIN(pending, IO_BUF_SIZE), 0);
-+        res = qemu_peek_buffer(f, &src, MIN(pending, f->buf_allocated_size), 0);
-         if (res == 0) {
-             return done;
-         }
-@@ -601,7 +613,7 @@ size_t qemu_get_buffer(QEMUFile *f, uint8_t *buf, size_t size)
-  */
- size_t qemu_get_buffer_in_place(QEMUFile *f, uint8_t **buf, size_t size)
- {
--    if (size < IO_BUF_SIZE) {
-+    if (size < f->buf_allocated_size) {
-         size_t res;
-         uint8_t *src = NULL;
- 
-@@ -626,7 +638,7 @@ int qemu_peek_byte(QEMUFile *f, int offset)
-     int index = f->buf_index + offset;
- 
-     assert(!qemu_file_is_writable(f));
--    assert(offset < IO_BUF_SIZE);
-+    assert(offset < f->buf_allocated_size);
- 
-     if (index >= f->buf_size) {
-         qemu_fill_buffer(f);
-@@ -778,7 +790,7 @@ static int qemu_compress_data(z_stream *stream, uint8_t *dest, size_t dest_len,
- ssize_t qemu_put_compression_data(QEMUFile *f, z_stream *stream,
-                                   const uint8_t *p, size_t size)
- {
--    ssize_t blen = IO_BUF_SIZE - f->buf_index - sizeof(int32_t);
-+    ssize_t blen = f->buf_allocated_size - f->buf_index - sizeof(int32_t);
- 
-     if (blen < compressBound(size)) {
-         return -1;
-diff --git a/migration/qemu-file.h b/migration/qemu-file.h
-index 3f36d4dc8c..67501fd9cf 100644
---- a/migration/qemu-file.h
-+++ b/migration/qemu-file.h
-@@ -121,6 +121,7 @@ typedef struct QEMUFileHooks {
- } QEMUFileHooks;
- 
- QEMUFile *qemu_fopen_ops(void *opaque, const QEMUFileOps *ops, bool has_ioc);
-+QEMUFile *qemu_fopen_ops_sized(void *opaque, const QEMUFileOps *ops, bool has_ioc, size_t buffer_size);
- void qemu_file_set_hooks(QEMUFile *f, const QEMUFileHooks *hooks);
- int qemu_get_fd(QEMUFile *f);
- int qemu_fclose(QEMUFile *f);
-diff --git a/migration/savevm-async.c b/migration/savevm-async.c
-index 79a0cda906..970ee3b3fc 100644
---- a/migration/savevm-async.c
-+++ b/migration/savevm-async.c
-@@ -418,7 +418,7 @@ void qmp_savevm_start(bool has_statefile, const char *statefile, Error **errp)
-         goto restart;
-     }
- 
--    snap_state.file = qemu_fopen_ops(&snap_state, &block_file_ops);
-+    snap_state.file = qemu_fopen_ops_sized(&snap_state, &block_file_ops, false, 4 * 1024 * 1024);
- 
-     if (!snap_state.file) {
-         error_set(errp, ERROR_CLASS_GENERIC_ERROR, "failed to open '%s'", statefile);
-@@ -567,7 +567,7 @@ int load_snapshot_from_blockdev(const char *filename, Error **errp)
-     blk_op_block_all(be, blocker);
- 
-     /* restore the VM state */
--    f = qemu_fopen_ops(be, &loadstate_file_ops);
-+    f = qemu_fopen_ops_sized(be, &loadstate_file_ops, false, 4 * 1024 * 1024);
-     if (!f) {
-         error_setg(errp, "Could not open VM state file");
-         goto the_end;

debian/patches/pve/0017-PVE-add-savevm-async-for-background-state-snapshots.patch

@@ -21,28 +21,37 @@ still opened by QEMU.
 Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
 Signed-off-by: Dietmar Maurer <dietmar@proxmox.com>
 Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
-[improve aborting]
+[SR: improve aborting
+     register yank before migration_incoming_state_destroy]
 Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
+[FE: further improve aborting
+     adapt to removal of QEMUFileOps
+     improve condition for entering final stage
+     adapt to QAPI and other changes for 8.2
+     make sure to not call vm_start() from coroutine
+     stop CPU throttling after finishing
+     force raw format when loading state as suggested by Friedrich Weber]
+Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
 ---
  hmp-commands-info.hx         |  13 +
- hmp-commands.hx              |  33 ++
+ hmp-commands.hx              |  17 ++
  include/migration/snapshot.h |   2 +
- include/monitor/hmp.h        |   5 +
+ include/monitor/hmp.h        |   3 +
  migration/meson.build        |   1 +
- migration/savevm-async.c     | 598 +++++++++++++++++++++++++++++++++++
- monitor/hmp-cmds.c           |  57 ++++
- qapi/migration.json          |  34 ++
- qapi/misc.json               |  32 ++
+ migration/savevm-async.c     | 553 +++++++++++++++++++++++++++++++++++
+ monitor/hmp-cmds.c           |  38 +++
+ qapi/migration.json          |  34 +++
+ qapi/misc.json               |  18 ++
  qemu-options.hx              |  12 +
- softmmu/vl.c                 |  10 +
- 11 files changed, 797 insertions(+)
+ system/vl.c                  |  10 +
+ 11 files changed, 701 insertions(+)
  create mode 100644 migration/savevm-async.c
 
 diff --git a/hmp-commands-info.hx b/hmp-commands-info.hx
-index 27206ac049..e6dd3be07a 100644
+index c59cd6637b..d1a7b99add 100644
 --- a/hmp-commands-info.hx
 +++ b/hmp-commands-info.hx
-@@ -551,6 +551,19 @@ SRST
+@@ -512,6 +512,19 @@ SRST
      Show current migration parameters.
  ERST
  
@@ -63,13 +72,13 @@ index 27206ac049..e6dd3be07a 100644
          .name       = "balloon",
          .args_type  = "",
 diff --git a/hmp-commands.hx b/hmp-commands.hx
-index 8e45bce2cd..96bd7e00bd 100644
+index 06746f0afc..0c7c6f2c16 100644
 --- a/hmp-commands.hx
 +++ b/hmp-commands.hx
-@@ -1743,3 +1743,36 @@ ERST
-         .help       = "start a round of guest dirty rate measurement",
-         .cmd        = hmp_calc_dirty_rate,
-     },
+@@ -1859,3 +1859,20 @@ SRST
+   List event channels in the guest
+ ERST
+ #endif
 +
 +    {
 +        .name       = "savevm-start",
@@ -80,22 +89,6 @@ index 8e45bce2cd..96bd7e00bd 100644
 +    },
 +
 +    {
-+        .name       = "snapshot-drive",
-+        .args_type  = "device:s,name:s",
-+        .params     = "device name",
-+        .help       = "Create internal snapshot.",
-+        .cmd = hmp_snapshot_drive,
-+    },
-+
-+    {
-+        .name       = "delete-drive-snapshot",
-+        .args_type  = "device:s,name:s",
-+        .params     = "device name",
-+        .help       = "Delete internal snapshot.",
-+        .cmd = hmp_delete_drive_snapshot,
-+    },
-+
-+    {
 +        .name       = "savevm-end",
 +        .args_type  = "",
 +        .params     = "",
@@ -104,21 +97,21 @@ index 8e45bce2cd..96bd7e00bd 100644
 +        .coroutine  = true,
 +    },
 diff --git a/include/migration/snapshot.h b/include/migration/snapshot.h
-index e72083b117..c846d37806 100644
+index 9e4dcaaa75..2581730d74 100644
 --- a/include/migration/snapshot.h
 +++ b/include/migration/snapshot.h
-@@ -61,4 +61,6 @@ bool delete_snapshot(const char *name,
-                     bool has_devices, strList *devices,
-                     Error **errp);
+@@ -68,4 +68,6 @@ bool delete_snapshot(const char *name,
+  */
+ void load_snapshot_resume(RunState state);
  
 +int load_snapshot_from_blockdev(const char *filename, Error **errp);
 +
  #endif
 diff --git a/include/monitor/hmp.h b/include/monitor/hmp.h
-index 3baa1058e2..1247d7362a 100644
+index ae116d9804..2596cc2426 100644
 --- a/include/monitor/hmp.h
 +++ b/include/monitor/hmp.h
-@@ -25,6 +25,7 @@ void hmp_info_status(Monitor *mon, const QDict *qdict);
+@@ -28,6 +28,7 @@ void hmp_info_status(Monitor *mon, const QDict *qdict);
  void hmp_info_uuid(Monitor *mon, const QDict *qdict);
  void hmp_info_chardev(Monitor *mon, const QDict *qdict);
  void hmp_info_mice(Monitor *mon, const QDict *qdict);
@@ -126,42 +119,44 @@ index 3baa1058e2..1247d7362a 100644
  void hmp_info_migrate(Monitor *mon, const QDict *qdict);
  void hmp_info_migrate_capabilities(Monitor *mon, const QDict *qdict);
  void hmp_info_migrate_parameters(Monitor *mon, const QDict *qdict);
-@@ -79,6 +80,10 @@ void hmp_netdev_add(Monitor *mon, const QDict *qdict);
- void hmp_netdev_del(Monitor *mon, const QDict *qdict);
- void hmp_getfd(Monitor *mon, const QDict *qdict);
- void hmp_closefd(Monitor *mon, const QDict *qdict);
+@@ -92,6 +93,8 @@ void hmp_closefd(Monitor *mon, const QDict *qdict);
+ void hmp_mouse_move(Monitor *mon, const QDict *qdict);
+ void hmp_mouse_button(Monitor *mon, const QDict *qdict);
+ void hmp_mouse_set(Monitor *mon, const QDict *qdict);
 +void hmp_savevm_start(Monitor *mon, const QDict *qdict);
-+void hmp_snapshot_drive(Monitor *mon, const QDict *qdict);
-+void hmp_delete_drive_snapshot(Monitor *mon, const QDict *qdict);
 +void hmp_savevm_end(Monitor *mon, const QDict *qdict);
  void hmp_sendkey(Monitor *mon, const QDict *qdict);
- void hmp_screendump(Monitor *mon, const QDict *qdict);
+ void coroutine_fn hmp_screendump(Monitor *mon, const QDict *qdict);
  void hmp_chardev_add(Monitor *mon, const QDict *qdict);
 diff --git a/migration/meson.build b/migration/meson.build
-index f8714dcb15..ea9aedeefc 100644
+index 020127d901..4b0c4f0f51 100644
 --- a/migration/meson.build
 +++ b/migration/meson.build
-@@ -23,6 +23,7 @@ softmmu_ss.add(files(
-   'multifd-zlib.c',
+@@ -27,6 +27,7 @@ system_ss.add(files(
+   'options.c',
    'postcopy-ram.c',
    'savevm.c',
 +  'savevm-async.c',
    'socket.c',
    'tls.c',
- ), gnutls)
+   'threadinfo.c',
 diff --git a/migration/savevm-async.c b/migration/savevm-async.c
 new file mode 100644
-index 0000000000..79a0cda906
+index 0000000000..276f8bfcbb
 --- /dev/null
 +++ b/migration/savevm-async.c
-@@ -0,0 +1,598 @@
+@@ -0,0 +1,553 @@
 +#include "qemu/osdep.h"
++#include "migration/channel-savevm-async.h"
 +#include "migration/migration.h"
++#include "migration/migration-stats.h"
++#include "migration/options.h"
 +#include "migration/savevm.h"
 +#include "migration/snapshot.h"
 +#include "migration/global_state.h"
 +#include "migration/ram.h"
 +#include "migration/qemu-file.h"
++#include "sysemu/cpu-throttle.h"
 +#include "sysemu/sysemu.h"
 +#include "sysemu/runstate.h"
 +#include "block/block.h"
@@ -173,15 +168,14 @@ index 0000000000..79a0cda906
 +#include "qapi/qapi-commands-misc.h"
 +#include "qapi/qapi-commands-block.h"
 +#include "qemu/cutils.h"
++#include "qemu/error-report.h"
 +#include "qemu/timer.h"
 +#include "qemu/main-loop.h"
 +#include "qemu/rcu.h"
++#include "qemu/yank.h"
 +
 +/* #define DEBUG_SAVEVM_STATE */
 +
-+/* used while emulated sync operation in progress */
-+#define NOT_DONE -EINPROGRESS
-+
 +#ifdef DEBUG_SAVEVM_STATE
 +#define DPRINTF(fmt, ...) \
 +    do { printf("savevm-async: " fmt, ## __VA_ARGS__); } while (0)
@@ -210,7 +204,7 @@ index 0000000000..79a0cda906
 +    int64_t total_time;
 +    QEMUBH *finalize_bh;
 +    Coroutine *co;
-+    QemuCoSleep *target_close_wait;
++    QemuCoSleep target_close_wait;
 +} snap_state;
 +
 +static bool savevm_aborted(void)
@@ -229,24 +223,20 @@ index 0000000000..79a0cda906
 +        info->bytes = s->bs_pos;
 +        switch (s->state) {
 +        case SAVE_STATE_ERROR:
-+            info->has_status = true;
 +            info->status = g_strdup("failed");
 +            info->has_total_time = true;
 +            info->total_time = s->total_time;
 +            if (s->error) {
-+                info->has_error = true;
 +                info->error = g_strdup(error_get_pretty(s->error));
 +            }
 +            break;
 +        case SAVE_STATE_ACTIVE:
-+            info->has_status = true;
 +            info->status = g_strdup("active");
 +            info->has_total_time = true;
 +            info->total_time = qemu_clock_get_ms(QEMU_CLOCK_REALTIME)
 +                - s->total_time;
 +            break;
 +        case SAVE_STATE_COMPLETED:
-+            info->has_status = true;
 +            info->status = g_strdup("completed");
 +            info->has_total_time = true;
 +            info->total_time = s->total_time;
@@ -268,6 +258,7 @@ index 0000000000..79a0cda906
 +
 +    if (snap_state.file) {
 +        ret = qemu_fclose(snap_state.file);
++        snap_state.file = NULL;
 +    }
 +
 +    if (snap_state.target) {
@@ -285,15 +276,13 @@ index 0000000000..79a0cda906
 +        blk_unref(snap_state.target);
 +        snap_state.target = NULL;
 +
-+        if (snap_state.target_close_wait) {
-+            qemu_co_sleep_wake(snap_state.target_close_wait);
-+        }
++        qemu_co_sleep_wake(&snap_state.target_close_wait);
 +    }
 +
 +    return ret;
 +}
 +
-+static void save_snapshot_error(const char *fmt, ...)
++static void G_GNUC_PRINTF(1, 2) save_snapshot_error(const char *fmt, ...)
 +{
 +    va_list ap;
 +    char *msg;
@@ -305,7 +294,7 @@ index 0000000000..79a0cda906
 +    DPRINTF("save_snapshot_error: %s\n", msg);
 +
 +    if (!snap_state.error) {
-+        error_set(&snap_state.error, ERROR_CLASS_GENERIC_ERROR, "%s", msg);
++        error_setg(&snap_state.error, "%s", msg);
 +    }
 +
 +    g_free (msg);
@@ -313,64 +302,9 @@ index 0000000000..79a0cda906
 +    snap_state.state = SAVE_STATE_ERROR;
 +}
 +
-+static int block_state_close(void *opaque, Error **errp)
-+{
-+    snap_state.file = NULL;
-+    return blk_flush(snap_state.target);
-+}
-+
-+typedef struct BlkRwCo {
-+    int64_t offset;
-+    QEMUIOVector *qiov;
-+    ssize_t ret;
-+} BlkRwCo;
-+
-+static void coroutine_fn block_state_write_entry(void *opaque) {
-+    BlkRwCo *rwco = opaque;
-+    rwco->ret = blk_co_pwritev(snap_state.target, rwco->offset, rwco->qiov->size,
-+                               rwco->qiov, 0);
-+    aio_wait_kick();
-+}
-+
-+static ssize_t block_state_writev_buffer(void *opaque, struct iovec *iov,
-+                                         int iovcnt, int64_t pos, Error **errp)
-+{
-+    QEMUIOVector qiov;
-+    BlkRwCo rwco;
-+
-+    assert(pos == snap_state.bs_pos);
-+    rwco = (BlkRwCo) {
-+        .offset = pos,
-+        .qiov = &qiov,
-+        .ret = NOT_DONE,
-+    };
-+
-+    qemu_iovec_init_external(&qiov, iov, iovcnt);
-+
-+    if (qemu_in_coroutine()) {
-+        block_state_write_entry(&rwco);
-+    } else {
-+        Coroutine *co = qemu_coroutine_create(&block_state_write_entry, &rwco);
-+        bdrv_coroutine_enter(blk_bs(snap_state.target), co);
-+        BDRV_POLL_WHILE(blk_bs(snap_state.target), rwco.ret == NOT_DONE);
-+    }
-+    if (rwco.ret < 0) {
-+        return rwco.ret;
-+    }
-+
-+    snap_state.bs_pos += qiov.size;
-+    return qiov.size;
-+}
-+
-+static const QEMUFileOps block_file_ops = {
-+    .writev_buffer =  block_state_writev_buffer,
-+    .close =          block_state_close,
-+};
-+
 +static void process_savevm_finalize(void *opaque)
 +{
 +    int ret;
-+    AioContext *iohandler_ctx = iohandler_get_aio_context();
 +    MigrationState *ms = migrate_get_current();
 +
 +    bool aborted = savevm_aborted();
@@ -387,9 +321,7 @@ index 0000000000..79a0cda906
 +     * so move it back. It can stay in the main context and live out its live
 +     * there, since we're done with it after this method ends anyway.
 +     */
-+    aio_context_acquire(iohandler_ctx);
 +    blk_set_aio_context(snap_state.target, qemu_get_aio_context(), NULL);
-+    aio_context_release(iohandler_ctx);
 +
 +    ret = vm_stop_force_state(RUN_STATE_FINISH_MIGRATE);
 +    if (ret < 0) {
@@ -401,7 +333,7 @@ index 0000000000..79a0cda906
 +        (void)qemu_savevm_state_complete_precopy(snap_state.file, false, false);
 +        ret = qemu_file_get_error(snap_state.file);
 +        if (ret < 0) {
-+                save_snapshot_error("qemu_savevm_state_iterate error %d", ret);
++            save_snapshot_error("qemu_savevm_state_complete_precopy error %d", ret);
 +        }
 +    }
 +
@@ -414,6 +346,12 @@ index 0000000000..79a0cda906
 +        ret || aborted ? MIGRATION_STATUS_FAILED : MIGRATION_STATUS_COMPLETED);
 +    ms->to_dst_file = NULL;
 +
++    /*
++     * Same as in migration_iteration_finish(): saving RAM might've turned on CPU throttling for
++     * auto-converge, make sure to disable it.
++     */
++    cpu_throttle_stop();
++
 +    qemu_savevm_state_cleanup();
 +
 +    ret = save_snapshot_cleanup();
@@ -422,8 +360,11 @@ index 0000000000..79a0cda906
 +    } else if (snap_state.state == SAVE_STATE_ACTIVE) {
 +        snap_state.state = SAVE_STATE_COMPLETED;
 +    } else if (aborted) {
-+        save_snapshot_error("process_savevm_cleanup: found aborted state: %d",
-+                            snap_state.state);
++        /*
++         * If there was an error, there's no need to set a new one here.
++         * If the snapshot was canceled, leave setting the state to
++         * qmp_savevm_end(), which is waked by save_snapshot_cleanup().
++         */
 +    } else {
 +        save_snapshot_error("process_savevm_cleanup: invalid state: %d",
 +                            snap_state.state);
@@ -455,18 +396,32 @@ index 0000000000..79a0cda906
 +    }
 +
 +    while (snap_state.state == SAVE_STATE_ACTIVE) {
-+        uint64_t pending_size, pend_precopy, pend_compatible, pend_postcopy;
++        uint64_t pending_size, pend_precopy, pend_postcopy;
++        uint64_t threshold = 400 * 1000;
 +
-+        /* pending is expected to be called without iothread lock */
-+        qemu_mutex_unlock_iothread();
-+        qemu_savevm_state_pending(snap_state.file, 0, &pend_precopy, &pend_compatible, &pend_postcopy);
-+        qemu_mutex_lock_iothread();
++        /*
++         * pending_{estimate,exact} are expected to be called without iothread
++         * lock. Similar to what is done in migration.c, call the exact variant
++         * only once pend_precopy in the estimate is below the threshold.
++         */
++        bql_unlock();
++        qemu_savevm_state_pending_estimate(&pend_precopy, &pend_postcopy);
++        if (pend_precopy <= threshold) {
++            qemu_savevm_state_pending_exact(&pend_precopy, &pend_postcopy);
++        }
++        bql_lock();
++        pending_size = pend_precopy + pend_postcopy;
 +
-+        pending_size = pend_precopy + pend_compatible + pend_postcopy;
++        /*
++         * A guest reaching this cutoff is dirtying lots of RAM. It should be
++         * large enough so that the guest can't dirty this much between the
++         * check and the guest actually being stopped, but it should be small
++         * enough to avoid long downtimes for non-hibernation snapshots.
++         */
++        maxlen = blk_getlength(snap_state.target) - 100*1024*1024;
 +
-+        maxlen = blk_getlength(snap_state.target) - 30*1024*1024;
-+
-+        if (pending_size > 400000 && snap_state.bs_pos + pending_size < maxlen) {
++        /* Note that there is no progress for pend_postcopy when iterating */
++        if (pend_precopy > threshold && snap_state.bs_pos + pending_size < maxlen) {
 +            ret = qemu_savevm_state_iterate(snap_state.file, false);
 +            if (ret < 0) {
 +                save_snapshot_error("qemu_savevm_state_iterate error %d", ret);
@@ -475,11 +430,7 @@ index 0000000000..79a0cda906
 +            DPRINTF("savevm iterate pending size %lu ret %d\n", pending_size, ret);
 +        } else {
 +            qemu_system_wakeup_request(QEMU_WAKEUP_REASON_OTHER, NULL);
-+            ret = global_state_store();
-+            if (ret) {
-+                save_snapshot_error("global_state_store error %d", ret);
-+                break;
-+            }
++            global_state_store();
 +
 +            DPRINTF("savevm iterate complete\n");
 +            break;
@@ -498,19 +449,25 @@ index 0000000000..79a0cda906
 +     * so move there now and after every flush.
 +     */
 +    aio_co_reschedule_self(qemu_get_aio_context());
-+    for (bs = bdrv_first(&it); bs; bs = bdrv_next(&it)) {
++    bdrv_graph_co_rdlock();
++    bs = bdrv_first(&it);
++    bdrv_graph_co_rdunlock();
++    while (bs) {
 +        /* target has BDRV_O_NO_FLUSH, no sense calling bdrv_flush on it */
-+        if (bs == blk_bs(snap_state.target)) {
-+            continue;
-+        }
-+
-+        AioContext *bs_ctx = bdrv_get_aio_context(bs);
-+        if (bs_ctx != qemu_get_aio_context()) {
-+            DPRINTF("savevm: async flushing drive %s\n", bs->filename);
-+            aio_co_reschedule_self(bs_ctx);
-+            bdrv_flush(bs);
-+            aio_co_reschedule_self(qemu_get_aio_context());
++        if (bs != blk_bs(snap_state.target)) {
++            AioContext *bs_ctx = bdrv_get_aio_context(bs);
++            if (bs_ctx != qemu_get_aio_context()) {
++                DPRINTF("savevm: async flushing drive %s\n", bs->filename);
++                aio_co_reschedule_self(bs_ctx);
++                bdrv_graph_co_rdlock();
++                bdrv_flush(bs);
++                bdrv_graph_co_rdunlock();
++                aio_co_reschedule_self(qemu_get_aio_context());
++            }
 +        }
++        bdrv_graph_co_rdlock();
++        bs = bdrv_next(&it);
++        bdrv_graph_co_rdunlock();
 +    }
 +
 +    DPRINTF("timing: async flushing took %ld ms\n",
@@ -519,28 +476,22 @@ index 0000000000..79a0cda906
 +    qemu_bh_schedule(snap_state.finalize_bh);
 +}
 +
-+void qmp_savevm_start(bool has_statefile, const char *statefile, Error **errp)
++void qmp_savevm_start(const char *statefile, Error **errp)
 +{
 +    Error *local_err = NULL;
 +    MigrationState *ms = migrate_get_current();
 +    AioContext *iohandler_ctx = iohandler_get_aio_context();
++    int ret = 0;
 +
 +    int bdrv_oflags = BDRV_O_RDWR | BDRV_O_RESIZE | BDRV_O_NO_FLUSH;
 +
 +    if (snap_state.state != SAVE_STATE_DONE) {
-+        error_set(errp, ERROR_CLASS_GENERIC_ERROR,
-+                  "VM snapshot already started\n");
++        error_setg(errp, "VM snapshot already started\n");
 +        return;
 +    }
 +
-+    if (migration_is_running(ms->state)) {
-+        error_set(errp, ERROR_CLASS_GENERIC_ERROR, QERR_MIGRATION_ACTIVE);
-+        return;
-+    }
-+
-+    if (migrate_use_block()) {
-+        error_set(errp, ERROR_CLASS_GENERIC_ERROR,
-+                  "Block migration and snapshots are incompatible");
++    if (migration_is_running()) {
++        error_setg(errp, "There's a migration process in progress");
 +        return;
 +    }
 +
@@ -549,13 +500,14 @@ index 0000000000..79a0cda906
 +    snap_state.bs_pos = 0;
 +    snap_state.total_time = qemu_clock_get_ms(QEMU_CLOCK_REALTIME);
 +    snap_state.blocker = NULL;
++    snap_state.target_close_wait = (QemuCoSleep){ .to_wake = NULL };
 +
 +    if (snap_state.error) {
 +        error_free(snap_state.error);
 +        snap_state.error = NULL;
 +    }
 +
-+    if (!has_statefile) {
++    if (!statefile) {
 +        vm_stop(RUN_STATE_SAVE_VM);
 +        snap_state.state = SAVE_STATE_COMPLETED;
 +        return;
@@ -571,14 +523,16 @@ index 0000000000..79a0cda906
 +    qdict_put_str(options, "driver", "raw");
 +    snap_state.target = blk_new_open(statefile, NULL, options, bdrv_oflags, &local_err);
 +    if (!snap_state.target) {
-+        error_set(errp, ERROR_CLASS_GENERIC_ERROR, "failed to open '%s'", statefile);
++        error_setg(errp, "failed to open '%s'", statefile);
 +        goto restart;
 +    }
 +
-+    snap_state.file = qemu_fopen_ops(&snap_state, &block_file_ops);
++    QIOChannel *ioc = QIO_CHANNEL(qio_channel_savevm_async_new(snap_state.target,
++                                                               &snap_state.bs_pos));
++    snap_state.file = qemu_file_new_output(ioc);
 +
 +    if (!snap_state.file) {
-+        error_set(errp, ERROR_CLASS_GENERIC_ERROR, "failed to open '%s'", statefile);
++        error_setg(errp, "failed to open '%s'", statefile);
 +        goto restart;
 +    }
 +
@@ -587,8 +541,10 @@ index 0000000000..79a0cda906
 +     * State is cleared in process_savevm_co, but has to be initialized
 +     * here (blocking main thread, from QMP) to avoid race conditions.
 +     */
-+    migrate_init(ms);
-+    memset(&ram_counters, 0, sizeof(ram_counters));
++    if (migrate_init(ms, errp)) {
++        return;
++    }
++    memset(&mig_stats, 0, sizeof(mig_stats));
 +    ms->to_dst_file = snap_state.file;
 +
 +    error_setg(&snap_state.blocker, "block device is in use by savevm");
@@ -596,17 +552,25 @@ index 0000000000..79a0cda906
 +
 +    snap_state.state = SAVE_STATE_ACTIVE;
 +    snap_state.finalize_bh = qemu_bh_new(process_savevm_finalize, &snap_state);
-+    snap_state.co = qemu_coroutine_create(&process_savevm_co, NULL);
-+    qemu_mutex_unlock_iothread();
 +    qemu_savevm_state_header(snap_state.file);
-+    qemu_savevm_state_setup(snap_state.file);
-+    qemu_mutex_lock_iothread();
++    ret = qemu_savevm_state_setup(snap_state.file, &local_err);
++    if (ret != 0) {
++        error_setg_errno(errp, -ret, "savevm state setup failed: %s",
++                         local_err ? error_get_pretty(local_err) : "unknown error");
++        return;
++    }
 +
 +    /* Async processing from here on out happens in iohandler context, so let
 +     * the target bdrv have its home there.
 +     */
-+    blk_set_aio_context(snap_state.target, iohandler_ctx, &local_err);
++    ret = blk_set_aio_context(snap_state.target, iohandler_ctx, &local_err);
++    if (ret != 0) {
++        warn_report("failed to set iohandler context for VM state target: %s %s",
++                    local_err ? error_get_pretty(local_err) : "unknown error",
++                    strerror(-ret));
++    }
 +
++    snap_state.co = qemu_coroutine_create(&process_savevm_co, NULL);
 +    aio_co_schedule(iohandler_ctx, snap_state.co);
 +
 +    return;
@@ -621,29 +585,10 @@ index 0000000000..79a0cda906
 +    }
 +}
 +
-+void coroutine_fn qmp_savevm_end(Error **errp)
++static void coroutine_fn wait_for_close_co(void *opaque)
 +{
 +    int64_t timeout;
 +
-+    if (snap_state.state == SAVE_STATE_DONE) {
-+        error_set(errp, ERROR_CLASS_GENERIC_ERROR,
-+                  "VM snapshot not started\n");
-+        return;
-+    }
-+
-+    if (snap_state.state == SAVE_STATE_ACTIVE) {
-+        snap_state.state = SAVE_STATE_CANCELLED;
-+        goto wait_for_close;
-+    }
-+
-+    if (snap_state.saved_vm_running) {
-+        vm_start();
-+        snap_state.saved_vm_running = false;
-+    }
-+
-+    snap_state.state = SAVE_STATE_DONE;
-+
-+wait_for_close:
 +    if (!snap_state.target) {
 +        DPRINTF("savevm-end: no target file open\n");
 +        return;
@@ -653,9 +598,8 @@ index 0000000000..79a0cda906
 +     * call exits the statefile will be closed and can be removed immediately */
 +    DPRINTF("savevm-end: waiting for cleanup\n");
 +    timeout = 30L * 1000 * 1000 * 1000;
-+    qemu_co_sleep_ns_wakeable(snap_state.target_close_wait,
++    qemu_co_sleep_ns_wakeable(&snap_state.target_close_wait,
 +                              QEMU_CLOCK_REALTIME, timeout);
-+    snap_state.target_close_wait = NULL;
 +    if (snap_state.target) {
 +        save_snapshot_error("timeout waiting for target file close in "
 +                            "qmp_savevm_end");
@@ -664,56 +608,54 @@ index 0000000000..79a0cda906
 +        return;
 +    }
 +
++    // File closed and no other error, so ensure next snapshot can be started.
++    if (snap_state.state != SAVE_STATE_ERROR) {
++        snap_state.state = SAVE_STATE_DONE;
++    }
++
 +    DPRINTF("savevm-end: cleanup done\n");
 +}
 +
-+// FIXME: Deprecated
-+void qmp_snapshot_drive(const char *device, const char *name, Error **errp)
++void qmp_savevm_end(Error **errp)
 +{
-+    // Compatibility to older qemu-server.
-+    qmp_blockdev_snapshot_internal_sync(device, name, errp);
-+}
-+
-+// FIXME: Deprecated
-+void qmp_delete_drive_snapshot(const char *device, const char *name,
-+                               Error **errp)
-+{
-+    // Compatibility to older qemu-server.
-+    (void)qmp_blockdev_snapshot_delete_internal_sync(device, false, NULL,
-+                                                     true, name, errp);
-+}
-+
-+static ssize_t loadstate_get_buffer(void *opaque, uint8_t *buf, int64_t pos,
-+                                    size_t size, Error **errp)
-+{
-+    BlockBackend *be = opaque;
-+    int64_t maxlen = blk_getlength(be);
-+    if (pos > maxlen) {
-+        return -EIO;
++    if (snap_state.state == SAVE_STATE_DONE) {
++        error_setg(errp, "VM snapshot not started\n");
++        return;
 +    }
-+    if ((pos + size) > maxlen) {
-+        size = maxlen - pos - 1;
-+    }
-+    if (size == 0) {
-+        return 0;
-+    }
-+    return blk_pread(be, pos, buf, size);
-+}
 +
-+static const QEMUFileOps loadstate_file_ops = {
-+    .get_buffer = loadstate_get_buffer,
-+};
++    Coroutine *wait_for_close = qemu_coroutine_create(wait_for_close_co, NULL);
++
++    if (snap_state.state == SAVE_STATE_ACTIVE) {
++        snap_state.state = SAVE_STATE_CANCELLED;
++        qemu_coroutine_enter(wait_for_close);
++        return;
++    }
++
++    if (snap_state.saved_vm_running) {
++        vm_start();
++        snap_state.saved_vm_running = false;
++    }
++
++    snap_state.state = SAVE_STATE_DONE;
++
++    qemu_coroutine_enter(wait_for_close);
++}
 +
 +int load_snapshot_from_blockdev(const char *filename, Error **errp)
 +{
 +    BlockBackend *be;
 +    Error *local_err = NULL;
 +    Error *blocker = NULL;
++    QDict *options;
 +
 +    QEMUFile *f;
++    size_t bs_pos = 0;
 +    int ret = -EINVAL;
 +
-+    be = blk_new_open(filename, NULL, NULL, 0, &local_err);
++    options = qdict_new();
++    qdict_put_str(options, "driver", "raw");
++
++    be = blk_new_open(filename, NULL, options, 0, &local_err);
 +
 +    if (!be) {
 +        error_setg(errp, "Could not open VM state file");
@@ -724,7 +666,7 @@ index 0000000000..79a0cda906
 +    blk_op_block_all(be, blocker);
 +
 +    /* restore the VM state */
-+    f = qemu_fopen_ops(be, &loadstate_file_ops);
++    f = qemu_file_new_input(QIO_CHANNEL(qio_channel_savevm_async_new(be, &bs_pos)));
 +    if (!f) {
 +        error_setg(errp, "Could not open VM state file");
 +        goto the_end;
@@ -737,6 +679,10 @@ index 0000000000..79a0cda906
 +    dirty_bitmap_mig_before_vm_start();
 +
 +    qemu_fclose(f);
++
++    /* state_destroy assumes a real migration which would have added a yank */
++    yank_register_instance(MIGRATION_YANK_INSTANCE, &error_abort);
++
 +    migration_incoming_state_destroy();
 +    if (ret < 0) {
 +        error_setg_errno(errp, -ret, "Error while loading VM state");
@@ -754,39 +700,28 @@ index 0000000000..79a0cda906
 +    return ret;
 +}
 diff --git a/monitor/hmp-cmds.c b/monitor/hmp-cmds.c
-index f528055cb6..42a1eaf370 100644
+index f601d06ab8..874084565f 100644
 --- a/monitor/hmp-cmds.c
 +++ b/monitor/hmp-cmds.c
-@@ -1908,6 +1908,63 @@ void hmp_info_memory_devices(Monitor *mon, const QDict *qdict)
-     hmp_handle_error(mon, err);
+@@ -24,6 +24,7 @@
+ #include "qapi/error.h"
+ #include "qapi/qapi-commands-control.h"
+ #include "qapi/qapi-commands-machine.h"
++#include "qapi/qapi-commands-migration.h"
+ #include "qapi/qapi-commands-misc.h"
+ #include "qapi/qmp/qdict.h"
+ #include "qemu/cutils.h"
+@@ -434,3 +435,40 @@ void hmp_dumpdtb(Monitor *mon, const QDict *qdict)
+     monitor_printf(mon, "dtb dumped to %s", filename);
  }
- 
+ #endif
++
 +void hmp_savevm_start(Monitor *mon, const QDict *qdict)
 +{
 +    Error *errp = NULL;
 +    const char *statefile = qdict_get_try_str(qdict, "statefile");
 +
-+    qmp_savevm_start(statefile != NULL, statefile, &errp);
-+    hmp_handle_error(mon, errp);
-+}
-+
-+void hmp_snapshot_drive(Monitor *mon, const QDict *qdict)
-+{
-+    Error *errp = NULL;
-+    const char *name = qdict_get_str(qdict, "name");
-+    const char *device = qdict_get_str(qdict, "device");
-+
-+    qmp_snapshot_drive(device, name, &errp);
-+    hmp_handle_error(mon, errp);
-+}
-+
-+void hmp_delete_drive_snapshot(Monitor *mon, const QDict *qdict)
-+{
-+    Error *errp = NULL;
-+    const char *name = qdict_get_str(qdict, "name");
-+    const char *device = qdict_get_str(qdict, "device");
-+
-+    qmp_delete_drive_snapshot(device, name, &errp);
++    qmp_savevm_start(statefile, &errp);
 +    hmp_handle_error(mon, errp);
 +}
 +
@@ -803,7 +738,7 @@ index f528055cb6..42a1eaf370 100644
 +    SaveVMInfo *info;
 +    info = qmp_query_savevm(NULL);
 +
-+    if (info->has_status) {
++    if (info->status) {
 +        monitor_printf(mon, "savevm status: %s\n", info->status);
 +        monitor_printf(mon, "total time: %" PRIu64 " milliseconds\n",
 +                       info->total_time);
@@ -813,21 +748,17 @@ index f528055cb6..42a1eaf370 100644
 +    if (info->has_bytes) {
 +        monitor_printf(mon, "Bytes saved: %"PRIu64"\n", info->bytes);
 +    }
-+    if (info->has_error) {
++    if (info->error) {
 +        monitor_printf(mon, "Error: %s\n", info->error);
 +    }
 +}
-+
- void hmp_info_iothreads(Monitor *mon, const QDict *qdict)
- {
-     IOThreadInfoList *info_list = qmp_query_iothreads(NULL);
 diff --git a/qapi/migration.json b/qapi/migration.json
-index 1124a2dda8..3d72b3e3f3 100644
+index 7324571e92..d6e94a7c41 100644
 --- a/qapi/migration.json
 +++ b/qapi/migration.json
-@@ -247,6 +247,40 @@
-            '*compression': 'CompressionStats',
-            '*socket-address': ['SocketAddress'] } }
+@@ -276,6 +276,40 @@
+            '*dirty-limit-throttle-time-per-round': 'uint64',
+            '*dirty-limit-ring-full-time': 'uint64'} }
  
 +##
 +# @SaveVMInfo:
@@ -867,10 +798,10 @@ index 1124a2dda8..3d72b3e3f3 100644
  # @query-migrate:
  #
 diff --git a/qapi/misc.json b/qapi/misc.json
-index 5c2ca3b556..9bc14e1032 100644
+index 559b66f201..7959e89c1e 100644
 --- a/qapi/misc.json
 +++ b/qapi/misc.json
-@@ -431,6 +431,38 @@
+@@ -454,6 +454,24 @@
  ##
  { 'command': 'query-fdsets', 'returns': ['FdsetInfo'] }
  
@@ -879,41 +810,27 @@ index 5c2ca3b556..9bc14e1032 100644
 +#
 +# Prepare for snapshot and halt VM. Save VM state to statefile.
 +#
++# @statefile: target file that state should be written to.
++#
 +##
 +{ 'command': 'savevm-start', 'data': { '*statefile': 'str' } }
 +
 +##
-+# @snapshot-drive:
-+#
-+# Create an internal drive snapshot.
-+#
-+##
-+{ 'command': 'snapshot-drive', 'data': { 'device': 'str', 'name': 'str' } }
-+
-+##
-+# @delete-drive-snapshot:
-+#
-+# Delete a drive snapshot.
-+#
-+##
-+{ 'command': 'delete-drive-snapshot', 'data': { 'device': 'str', 'name': 'str' } }
-+
-+##
 +# @savevm-end:
 +#
 +# Resume VM after a snapshot.
 +#
 +##
-+{ 'command': 'savevm-end', 'coroutine': true }
++{ 'command': 'savevm-end' }
 +
  ##
  # @CommandLineParameterType:
  #
 diff --git a/qemu-options.hx b/qemu-options.hx
-index 83aa59a920..002ba697e9 100644
+index d94e2cbbae..07730f9e65 100644
 --- a/qemu-options.hx
 +++ b/qemu-options.hx
-@@ -4131,6 +4131,18 @@ SRST
+@@ -4805,6 +4805,18 @@ SRST
      Start right away with a saved state (``loadvm`` in monitor)
  ERST
  
@@ -932,22 +849,22 @@ index 83aa59a920..002ba697e9 100644
  #ifndef _WIN32
  DEF("daemonize", 0, QEMU_OPTION_daemonize, \
      "-daemonize      daemonize QEMU after initializing\n", QEMU_ARCH_ALL)
-diff --git a/softmmu/vl.c b/softmmu/vl.c
-index 5ca11e7469..220c67cd32 100644
---- a/softmmu/vl.c
-+++ b/softmmu/vl.c
-@@ -150,6 +150,7 @@ static const char *incoming;
- static const char *loadvm;
- static const char *accelerators;
+diff --git a/system/vl.c b/system/vl.c
+index 01b8b8e77a..d6bbdc906e 100644
+--- a/system/vl.c
++++ b/system/vl.c
+@@ -164,6 +164,7 @@ static const char *accelerators;
+ static bool have_custom_ram_size;
+ static const char *ram_memdev_id;
  static QDict *machine_opts_dict;
 +static const char *loadstate;
  static QTAILQ_HEAD(, ObjectOption) object_opts = QTAILQ_HEAD_INITIALIZER(object_opts);
- static ram_addr_t maxram_size;
- static uint64_t ram_slots;
-@@ -2700,6 +2701,12 @@ void qmp_x_exit_preconfig(Error **errp)
-             autostart = 0;
-             exit(1);
-         }
+ static QTAILQ_HEAD(, DeviceOption) device_opts = QTAILQ_HEAD_INITIALIZER(device_opts);
+ static int display_remote;
+@@ -2727,6 +2728,12 @@ void qmp_x_exit_preconfig(Error **errp)
+         RunState state = autostart ? RUN_STATE_RUNNING : runstate_get();
+         load_snapshot(loadvm, NULL, false, NULL, &error_fatal);
+         load_snapshot_resume(state);
 +    } else if (loadstate) {
 +        Error *local_err = NULL;
 +        if (load_snapshot_from_blockdev(loadstate, &local_err) < 0) {
@@ -957,7 +874,7 @@ index 5ca11e7469..220c67cd32 100644
      }
      if (replay_mode != REPLAY_MODE_NONE) {
          replay_vmstate_init();
-@@ -3238,6 +3245,9 @@ void qemu_init(int argc, char **argv, char **envp)
+@@ -3275,6 +3282,9 @@ void qemu_init(int argc, char **argv)
              case QEMU_OPTION_loadvm:
                  loadvm = optarg;
                  break;

debian/patches/pve/0018-PVE-add-optional-buffer-size-to-QEMUFile.patch

@@ -0,0 +1,208 @@
+From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
+From: Wolfgang Bumiller <w.bumiller@proxmox.com>
+Date: Mon, 4 May 2020 11:05:08 +0200
+Subject: [PATCH] PVE: add optional buffer size to QEMUFile
+
+So we can use a 4M buffer for savevm-async which should
+increase performance storing the state onto ceph.
+
+Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
+[increase max IOV count in QEMUFile to actually write more data]
+Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
+Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
+[FE: adapt to removal of QEMUFileOps]
+Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
+---
+ migration/qemu-file.c    | 48 +++++++++++++++++++++++++++-------------
+ migration/qemu-file.h    |  2 ++
+ migration/savevm-async.c |  5 +++--
+ 3 files changed, 38 insertions(+), 17 deletions(-)
+
+diff --git a/migration/qemu-file.c b/migration/qemu-file.c
+index b6d2f588bd..754dc0b3f7 100644
+--- a/migration/qemu-file.c
++++ b/migration/qemu-file.c
+@@ -34,8 +34,8 @@
+ #include "rdma.h"
+ #include "io/channel-file.h"
+ 
+-#define IO_BUF_SIZE 32768
+-#define MAX_IOV_SIZE MIN_CONST(IOV_MAX, 64)
++#define DEFAULT_IO_BUF_SIZE 32768
++#define MAX_IOV_SIZE MIN_CONST(IOV_MAX, 256)
+ 
+ struct QEMUFile {
+     QIOChannel *ioc;
+@@ -43,7 +43,8 @@ struct QEMUFile {
+ 
+     int buf_index;
+     int buf_size; /* 0 when writing */
+-    uint8_t buf[IO_BUF_SIZE];
++    size_t buf_allocated_size;
++    uint8_t *buf;
+ 
+     DECLARE_BITMAP(may_free, MAX_IOV_SIZE);
+     struct iovec iov[MAX_IOV_SIZE];
+@@ -100,7 +101,9 @@ int qemu_file_shutdown(QEMUFile *f)
+     return 0;
+ }
+ 
+-static QEMUFile *qemu_file_new_impl(QIOChannel *ioc, bool is_writable)
++static QEMUFile *qemu_file_new_impl(QIOChannel *ioc,
++                                    bool is_writable,
++                                    size_t buffer_size)
+ {
+     QEMUFile *f;
+ 
+@@ -109,6 +112,8 @@ static QEMUFile *qemu_file_new_impl(QIOChannel *ioc, bool is_writable)
+     object_ref(ioc);
+     f->ioc = ioc;
+     f->is_writable = is_writable;
++    f->buf_allocated_size = buffer_size;
++    f->buf = malloc(buffer_size);
+ 
+     return f;
+ }
+@@ -119,17 +124,27 @@ static QEMUFile *qemu_file_new_impl(QIOChannel *ioc, bool is_writable)
+  */
+ QEMUFile *qemu_file_get_return_path(QEMUFile *f)
+ {
+-    return qemu_file_new_impl(f->ioc, !f->is_writable);
++    return qemu_file_new_impl(f->ioc, !f->is_writable, DEFAULT_IO_BUF_SIZE);
+ }
+ 
+ QEMUFile *qemu_file_new_output(QIOChannel *ioc)
+ {
+-    return qemu_file_new_impl(ioc, true);
++    return qemu_file_new_impl(ioc, true, DEFAULT_IO_BUF_SIZE);
++}
++
++QEMUFile *qemu_file_new_output_sized(QIOChannel *ioc, size_t buffer_size)
++{
++    return qemu_file_new_impl(ioc, true, buffer_size);
+ }
+ 
+ QEMUFile *qemu_file_new_input(QIOChannel *ioc)
+ {
+-    return qemu_file_new_impl(ioc, false);
++    return qemu_file_new_impl(ioc, false, DEFAULT_IO_BUF_SIZE);
++}
++
++QEMUFile *qemu_file_new_input_sized(QIOChannel *ioc, size_t buffer_size)
++{
++    return qemu_file_new_impl(ioc, false, buffer_size);
+ }
+ 
+ /*
+@@ -327,7 +342,7 @@ static ssize_t coroutine_mixed_fn qemu_fill_buffer(QEMUFile *f)
+     do {
+         len = qio_channel_read(f->ioc,
+                                (char *)f->buf + pending,
+-                               IO_BUF_SIZE - pending,
++                               f->buf_allocated_size - pending,
+                                &local_error);
+         if (len == QIO_CHANNEL_ERR_BLOCK) {
+             if (qemu_in_coroutine()) {
+@@ -367,6 +382,9 @@ int qemu_fclose(QEMUFile *f)
+         ret = ret2;
+     }
+     g_clear_pointer(&f->ioc, object_unref);
++
++    free(f->buf);
++
+     error_free(f->last_error_obj);
+     g_free(f);
+     trace_qemu_file_fclose();
+@@ -415,7 +433,7 @@ static void add_buf_to_iovec(QEMUFile *f, size_t len)
+ {
+     if (!add_to_iovec(f, f->buf + f->buf_index, len, false)) {
+         f->buf_index += len;
+-        if (f->buf_index == IO_BUF_SIZE) {
++        if (f->buf_index == f->buf_allocated_size) {
+             qemu_fflush(f);
+         }
+     }
+@@ -440,7 +458,7 @@ void qemu_put_buffer(QEMUFile *f, const uint8_t *buf, size_t size)
+     }
+ 
+     while (size > 0) {
+-        l = IO_BUF_SIZE - f->buf_index;
++        l = f->buf_allocated_size - f->buf_index;
+         if (l > size) {
+             l = size;
+         }
+@@ -586,8 +604,8 @@ size_t coroutine_mixed_fn qemu_peek_buffer(QEMUFile *f, uint8_t **buf, size_t si
+     size_t index;
+ 
+     assert(!qemu_file_is_writable(f));
+-    assert(offset < IO_BUF_SIZE);
+-    assert(size <= IO_BUF_SIZE - offset);
++    assert(offset < f->buf_allocated_size);
++    assert(size <= f->buf_allocated_size - offset);
+ 
+     /* The 1st byte to read from */
+     index = f->buf_index + offset;
+@@ -637,7 +655,7 @@ size_t coroutine_mixed_fn qemu_get_buffer(QEMUFile *f, uint8_t *buf, size_t size
+         size_t res;
+         uint8_t *src;
+ 
+-        res = qemu_peek_buffer(f, &src, MIN(pending, IO_BUF_SIZE), 0);
++        res = qemu_peek_buffer(f, &src, MIN(pending, f->buf_allocated_size), 0);
+         if (res == 0) {
+             return done;
+         }
+@@ -671,7 +689,7 @@ size_t coroutine_mixed_fn qemu_get_buffer(QEMUFile *f, uint8_t *buf, size_t size
+  */
+ size_t coroutine_mixed_fn qemu_get_buffer_in_place(QEMUFile *f, uint8_t **buf, size_t size)
+ {
+-    if (size < IO_BUF_SIZE) {
++    if (size < f->buf_allocated_size) {
+         size_t res;
+         uint8_t *src = NULL;
+ 
+@@ -696,7 +714,7 @@ int coroutine_mixed_fn qemu_peek_byte(QEMUFile *f, int offset)
+     int index = f->buf_index + offset;
+ 
+     assert(!qemu_file_is_writable(f));
+-    assert(offset < IO_BUF_SIZE);
++    assert(offset < f->buf_allocated_size);
+ 
+     if (index >= f->buf_size) {
+         qemu_fill_buffer(f);
+diff --git a/migration/qemu-file.h b/migration/qemu-file.h
+index 11c2120edd..edf3c5d147 100644
+--- a/migration/qemu-file.h
++++ b/migration/qemu-file.h
+@@ -30,7 +30,9 @@
+ #include "io/channel.h"
+ 
+ QEMUFile *qemu_file_new_input(QIOChannel *ioc);
++QEMUFile *qemu_file_new_input_sized(QIOChannel *ioc, size_t buffer_size);
+ QEMUFile *qemu_file_new_output(QIOChannel *ioc);
++QEMUFile *qemu_file_new_output_sized(QIOChannel *ioc, size_t buffer_size);
+ int qemu_fclose(QEMUFile *f);
+ 
+ /*
+diff --git a/migration/savevm-async.c b/migration/savevm-async.c
+index 276f8bfcbb..30921d7e9f 100644
+--- a/migration/savevm-async.c
++++ b/migration/savevm-async.c
+@@ -381,7 +381,7 @@ void qmp_savevm_start(const char *statefile, Error **errp)
+ 
+     QIOChannel *ioc = QIO_CHANNEL(qio_channel_savevm_async_new(snap_state.target,
+                                                                &snap_state.bs_pos));
+-    snap_state.file = qemu_file_new_output(ioc);
++    snap_state.file = qemu_file_new_output_sized(ioc, 4 * 1024 * 1024);
+ 
+     if (!snap_state.file) {
+         error_setg(errp, "failed to open '%s'", statefile);
+@@ -518,7 +518,8 @@ int load_snapshot_from_blockdev(const char *filename, Error **errp)
+     blk_op_block_all(be, blocker);
+ 
+     /* restore the VM state */
+-    f = qemu_file_new_input(QIO_CHANNEL(qio_channel_savevm_async_new(be, &bs_pos)));
++    f = qemu_file_new_input_sized(QIO_CHANNEL(qio_channel_savevm_async_new(be, &bs_pos)),
++                                  4 * 1024 * 1024);
+     if (!f) {
+         error_setg(errp, "Could not open VM state file");
+         goto the_end;

debian/patches/pve/0019-PVE-block-add-the-zeroinit-block-driver-filter.patch

@@ -4,30 +4,34 @@ Date: Mon, 6 Apr 2020 12:16:47 +0200
 Subject: [PATCH] PVE: block: add the zeroinit block driver filter
 
 Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
+[FE: adapt to changed function signatures
+     adhere to block graph lock requirements
+     use dedicated function to open file child]
+Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
 ---
  block/meson.build |   1 +
- block/zeroinit.c  | 196 ++++++++++++++++++++++++++++++++++++++++++++++
- 2 files changed, 197 insertions(+)
+ block/zeroinit.c  | 207 ++++++++++++++++++++++++++++++++++++++++++++++
+ 2 files changed, 208 insertions(+)
  create mode 100644 block/zeroinit.c
 
 diff --git a/block/meson.build b/block/meson.build
-index 0450914c7a..7a0bc3df09 100644
+index f1262ec2ba..6a60b5d6b9 100644
 --- a/block/meson.build
 +++ b/block/meson.build
-@@ -41,6 +41,7 @@ block_ss.add(files(
-   'vmdk.c',
-   'vpc.c',
+@@ -39,6 +39,7 @@ block_ss.add(files(
+   'throttle.c',
+   'throttle-groups.c',
    'write-threshold.c',
 +  'zeroinit.c',
- ), zstd, zlib, gnutls)
+ ), zstd, zlib)
  
- softmmu_ss.add(when: 'CONFIG_TCG', if_true: files('blkreplay.c'))
+ system_ss.add(when: 'CONFIG_TCG', if_true: files('blkreplay.c'))
 diff --git a/block/zeroinit.c b/block/zeroinit.c
 new file mode 100644
-index 0000000000..5529627f7e
+index 0000000000..2b2b194ccf
 --- /dev/null
 +++ b/block/zeroinit.c
-@@ -0,0 +1,196 @@
+@@ -0,0 +1,207 @@
 +/*
 + * Filter to fake a zero-initialized block device.
 + *
@@ -41,6 +45,8 @@ index 0000000000..5529627f7e
 +#include "qemu/osdep.h"
 +#include "qapi/error.h"
 +#include "block/block_int.h"
++#include "block/block-io.h"
++#include "block/graph-lock.h"
 +#include "qapi/qmp/qdict.h"
 +#include "qapi/qmp/qstring.h"
 +#include "qemu/cutils.h"
@@ -106,10 +112,9 @@ index 0000000000..5529627f7e
 +    }
 +
 +    /* Open the raw file */
-+    bs->file = bdrv_open_child(qemu_opt_get(opts, "x-next"), options, "next",
-+                               bs, &child_of_bds, BDRV_CHILD_FILTERED, false, &local_err);
-+    if (local_err) {
-+        ret = -EINVAL;
++    ret = bdrv_open_file_child(qemu_opt_get(opts, "x-next"), options, "next",
++                               bs, &local_err);
++    if (ret < 0) {
 +        error_propagate(errp, local_err);
 +        goto fail;
 +    }
@@ -120,7 +125,9 @@ index 0000000000..5529627f7e
 +    ret = 0;
 +fail:
 +    if (ret < 0) {
++        bdrv_graph_wrlock();
 +        bdrv_unref_child(bs, bs->file);
++        bdrv_graph_wrunlock();
 +    }
 +    qemu_opts_del(opts);
 +    return ret;
@@ -132,28 +139,32 @@ index 0000000000..5529627f7e
 +    (void)s;
 +}
 +
-+static int64_t zeroinit_getlength(BlockDriverState *bs)
++static coroutine_fn int64_t GRAPH_RDLOCK
++zeroinit_co_getlength(BlockDriverState *bs)
 +{
-+    return bdrv_getlength(bs->file->bs);
++    return bdrv_co_getlength(bs->file->bs);
 +}
 +
-+static int coroutine_fn zeroinit_co_preadv(BlockDriverState *bs,
-+    uint64_t offset, uint64_t bytes, QEMUIOVector *qiov, int flags)
++static int coroutine_fn GRAPH_RDLOCK
++zeroinit_co_preadv(BlockDriverState *bs, int64_t offset, int64_t bytes,
++                   QEMUIOVector *qiov, BdrvRequestFlags flags)
 +{
 +    return bdrv_co_preadv(bs->file, offset, bytes, qiov, flags);
 +}
 +
-+static int coroutine_fn zeroinit_co_pwrite_zeroes(BlockDriverState *bs, int64_t offset,
-+                                                 int count, BdrvRequestFlags flags)
++static int coroutine_fn GRAPH_RDLOCK
++zeroinit_co_pwrite_zeroes(BlockDriverState *bs, int64_t offset, int64_t bytes,
++                          BdrvRequestFlags flags)
 +{
 +    BDRVZeroinitState *s = bs->opaque;
 +    if (offset >= s->extents)
 +        return 0;
-+    return bdrv_pwrite_zeroes(bs->file, offset, count, flags);
++    return bdrv_pwrite_zeroes(bs->file, offset, bytes, flags);
 +}
 +
-+static int coroutine_fn zeroinit_co_pwritev(BlockDriverState *bs,
-+    uint64_t offset, uint64_t bytes, QEMUIOVector *qiov, int flags)
++static int coroutine_fn GRAPH_RDLOCK
++zeroinit_co_pwritev(BlockDriverState *bs, int64_t offset, int64_t bytes,
++                    QEMUIOVector *qiov, BdrvRequestFlags flags)
 +{
 +    BDRVZeroinitState *s = bs->opaque;
 +    int64_t extents = offset + bytes;
@@ -162,33 +173,37 @@ index 0000000000..5529627f7e
 +    return bdrv_co_pwritev(bs->file, offset, bytes, qiov, flags);
 +}
 +
-+static coroutine_fn int zeroinit_co_flush(BlockDriverState *bs)
++static coroutine_fn int GRAPH_RDLOCK
++zeroinit_co_flush(BlockDriverState *bs)
 +{
 +    return bdrv_co_flush(bs->file->bs);
 +}
 +
-+static int zeroinit_has_zero_init(BlockDriverState *bs)
++static int GRAPH_RDLOCK
++zeroinit_has_zero_init(BlockDriverState *bs)
 +{
 +    BDRVZeroinitState *s = bs->opaque;
 +    return s->has_zero_init;
 +}
 +
-+static int coroutine_fn zeroinit_co_pdiscard(BlockDriverState *bs,
-+                                             int64_t offset, int count)
++static int coroutine_fn GRAPH_RDLOCK
++zeroinit_co_pdiscard(BlockDriverState *bs, int64_t offset, int64_t bytes)
 +{
-+    return bdrv_co_pdiscard(bs->file, offset, count);
++    return bdrv_co_pdiscard(bs->file, offset, bytes);
 +}
 +
-+static int zeroinit_co_truncate(BlockDriverState *bs, int64_t offset,
-+                                _Bool exact, PreallocMode prealloc,
-+                                BdrvRequestFlags req_flags, Error **errp)
++static int GRAPH_RDLOCK
++zeroinit_co_truncate(BlockDriverState *bs, int64_t offset, _Bool exact,
++                     PreallocMode prealloc, BdrvRequestFlags req_flags,
++                     Error **errp)
 +{
 +    return bdrv_co_truncate(bs->file, offset, exact, prealloc, req_flags, errp);
 +}
 +
-+static int zeroinit_get_info(BlockDriverState *bs, BlockDriverInfo *bdi)
++static coroutine_fn int GRAPH_RDLOCK
++zeroinit_co_get_info(BlockDriverState *bs, BlockDriverInfo *bdi)
 +{
-+    return bdrv_get_info(bs->file->bs, bdi);
++    return bdrv_co_get_info(bs->file->bs, bdi);
 +}
 +
 +static BlockDriver bdrv_zeroinit = {
@@ -197,9 +212,9 @@ index 0000000000..5529627f7e
 +    .instance_size                    = sizeof(BDRVZeroinitState),
 +
 +    .bdrv_parse_filename              = zeroinit_parse_filename,
-+    .bdrv_file_open                   = zeroinit_open,
++    .bdrv_open                        = zeroinit_open,
 +    .bdrv_close                       = zeroinit_close,
-+    .bdrv_getlength                   = zeroinit_getlength,
++    .bdrv_co_getlength                = zeroinit_co_getlength,
 +    .bdrv_child_perm                  = bdrv_default_perms,
 +    .bdrv_co_flush_to_disk            = zeroinit_co_flush,
 +
@@ -215,7 +230,7 @@ index 0000000000..5529627f7e
 +    .bdrv_co_pdiscard                 = zeroinit_co_pdiscard,
 +
 +    .bdrv_co_truncate                 = zeroinit_co_truncate,
-+    .bdrv_get_info                    = zeroinit_get_info,
++    .bdrv_co_get_info                 = zeroinit_co_get_info,
 +};
 +
 +static void bdrv_zeroinit_init(void)

debian/patches/pve/0020-PVE-Add-dummy-id-command-line-parameter.patch

@@ -10,16 +10,16 @@ Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
 Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
 ---
  qemu-options.hx | 3 +++
- softmmu/vl.c    | 8 ++++++++
+ system/vl.c     | 8 ++++++++
  2 files changed, 11 insertions(+)
 
 diff --git a/qemu-options.hx b/qemu-options.hx
-index 002ba697e9..a05959b9f1 100644
+index 07730f9e65..7fdc944965 100644
 --- a/qemu-options.hx
 +++ b/qemu-options.hx
-@@ -1005,6 +1005,9 @@ DEFHEADING()
+@@ -1239,6 +1239,9 @@ legacy PC, they are not recommended for modern configurations.
  
- DEFHEADING(Block device options:)
+ ERST
  
 +DEF("id", HAS_ARG, QEMU_OPTION_id,
 +    "-id n           set the VMID", QEMU_ARCH_ALL)
@@ -27,11 +27,11 @@ index 002ba697e9..a05959b9f1 100644
  DEF("fda", HAS_ARG, QEMU_OPTION_fda,
      "-fda/-fdb file  use 'file' as floppy disk 0/1 image\n", QEMU_ARCH_ALL)
  DEF("fdb", HAS_ARG, QEMU_OPTION_fdb, "", QEMU_ARCH_ALL)
-diff --git a/softmmu/vl.c b/softmmu/vl.c
-index 220c67cd32..d87cf6e103 100644
---- a/softmmu/vl.c
-+++ b/softmmu/vl.c
-@@ -2736,6 +2736,7 @@ void qemu_init(int argc, char **argv, char **envp)
+diff --git a/system/vl.c b/system/vl.c
+index d6bbdc906e..200468a753 100644
+--- a/system/vl.c
++++ b/system/vl.c
+@@ -2764,6 +2764,7 @@ void qemu_init(int argc, char **argv)
      MachineClass *machine_class;
      bool userconfig = true;
      FILE *vmstate_dump_file = NULL;
@@ -39,9 +39,9 @@ index 220c67cd32..d87cf6e103 100644
  
      qemu_add_opts(&qemu_drive_opts);
      qemu_add_drive_opts(&qemu_legacy_drive_opts);
-@@ -3360,6 +3361,13 @@ void qemu_init(int argc, char **argv, char **envp)
-             case QEMU_OPTION_smp:
-                 machine_parse_property_opt(qemu_find_opts("smp-opts"), "smp", optarg, &error_fatal);
+@@ -3387,6 +3388,13 @@ void qemu_init(int argc, char **argv)
+                 machine_parse_property_opt(qemu_find_opts("smp-opts"),
+                                            "smp", optarg);
                  break;
 +            case QEMU_OPTION_id:
 +                vm_id = strtol(optarg, (char **)&optarg, 10);
@@ -50,6 +50,6 @@ index 220c67cd32..d87cf6e103 100644
 +                    exit(1);
 +                }
 +                break;
+ #ifdef CONFIG_VNC
              case QEMU_OPTION_vnc:
                  vnc_parse(optarg);
-                 break;

debian/patches/pve/0021-PVE-Config-Revert-target-i386-disable-LINT0-after-re.patch

@@ -11,10 +11,10 @@ Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
  1 file changed, 9 insertions(+)
 
 diff --git a/hw/intc/apic_common.c b/hw/intc/apic_common.c
-index 2a20982066..7968ad5a93 100644
+index c13cdd7994..fd5808cdc0 100644
 --- a/hw/intc/apic_common.c
 +++ b/hw/intc/apic_common.c
-@@ -278,6 +278,15 @@ static void apic_reset_common(DeviceState *dev)
+@@ -263,6 +263,15 @@ static void apic_reset_common(DeviceState *dev)
      info->vapic_base_update(s);
  
      apic_init_reset(dev);

debian/patches/pve/0022-PVE-Up-Config-file-posix-make-locking-optiono-on-cre.patch

@@ -9,14 +9,14 @@ Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
 Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
 ---
  block/file-posix.c   | 59 ++++++++++++++++++++++++++++++--------------
- qapi/block-core.json |  3 ++-
- 2 files changed, 42 insertions(+), 20 deletions(-)
+ qapi/block-core.json |  7 +++++-
+ 2 files changed, 46 insertions(+), 20 deletions(-)
 
 diff --git a/block/file-posix.c b/block/file-posix.c
-index 1bbeb9e658..f28c5a3e52 100644
+index 99e5bea1cc..6a4f6a25e6 100644
 --- a/block/file-posix.c
 +++ b/block/file-posix.c
-@@ -2443,6 +2443,7 @@ raw_co_create(BlockdevCreateOptions *options, Error **errp)
+@@ -2884,6 +2884,7 @@ raw_co_create(BlockdevCreateOptions *options, Error **errp)
      int fd;
      uint64_t perm, shared;
      int result = 0;
@@ -24,7 +24,7 @@ index 1bbeb9e658..f28c5a3e52 100644
  
      /* Validate options and set default values */
      assert(options->driver == BLOCKDEV_DRIVER_FILE);
-@@ -2483,19 +2484,22 @@ raw_co_create(BlockdevCreateOptions *options, Error **errp)
+@@ -2924,19 +2925,22 @@ raw_co_create(BlockdevCreateOptions *options, Error **errp)
      perm = BLK_PERM_WRITE | BLK_PERM_RESIZE;
      shared = BLK_PERM_ALL & ~BLK_PERM_RESIZE;
  
@@ -59,7 +59,7 @@ index 1bbeb9e658..f28c5a3e52 100644
      }
  
      /* Clear the file by truncating it to 0 */
-@@ -2549,13 +2553,15 @@ raw_co_create(BlockdevCreateOptions *options, Error **errp)
+@@ -2990,13 +2994,15 @@ raw_co_create(BlockdevCreateOptions *options, Error **errp)
      }
  
  out_unlock:
@@ -82,7 +82,7 @@ index 1bbeb9e658..f28c5a3e52 100644
      }
  
  out_close:
-@@ -2580,6 +2586,7 @@ static int coroutine_fn raw_co_create_opts(BlockDriver *drv,
+@@ -3020,6 +3026,7 @@ raw_co_create_opts(BlockDriver *drv, const char *filename,
      PreallocMode prealloc;
      char *buf = NULL;
      Error *local_err = NULL;
@@ -90,7 +90,7 @@ index 1bbeb9e658..f28c5a3e52 100644
  
      /* Skip file: protocol prefix */
      strstart(filename, "file:", &filename);
-@@ -2602,6 +2609,18 @@ static int coroutine_fn raw_co_create_opts(BlockDriver *drv,
+@@ -3042,6 +3049,18 @@ raw_co_create_opts(BlockDriver *drv, const char *filename,
          return -EINVAL;
      }
  
@@ -109,7 +109,7 @@ index 1bbeb9e658..f28c5a3e52 100644
      options = (BlockdevCreateOptions) {
          .driver     = BLOCKDEV_DRIVER_FILE,
          .u.file     = {
-@@ -2613,6 +2632,8 @@ static int coroutine_fn raw_co_create_opts(BlockDriver *drv,
+@@ -3053,6 +3072,8 @@ raw_co_create_opts(BlockDriver *drv, const char *filename,
              .nocow              = nocow,
              .has_extent_size_hint = has_extent_size_hint,
              .extent_size_hint   = extent_size_hint,
@@ -119,10 +119,21 @@ index 1bbeb9e658..f28c5a3e52 100644
      };
      return raw_co_create(&options, errp);
 diff --git a/qapi/block-core.json b/qapi/block-core.json
-index 6356a63695..fdfa579d00 100644
+index c2a337cc04..1cb6f04db3 100644
 --- a/qapi/block-core.json
 +++ b/qapi/block-core.json
-@@ -4341,7 +4341,8 @@
+@@ -4959,6 +4959,10 @@
+ # @extent-size-hint: Extent size hint to add to the image file; 0 for
+ #     not adding an extent size hint (default: 1 MB, since 5.1)
+ #
++# @locking: whether to enable file locking.  If set to 'auto', only
++#     enable when Open File Descriptor (OFD) locking API is available
++#     (default: auto).
++#
+ # Since: 2.12
+ ##
+ { 'struct': 'BlockdevCreateOptionsFile',
+@@ -4966,7 +4970,8 @@
              'size':                 'size',
              '*preallocation':       'PreallocMode',
              '*nocow':               'bool',

debian/patches/pve/0023-PVE-monitor-disable-oob-capability.patch

@@ -18,10 +18,10 @@ Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
  1 file changed, 1 insertion(+), 2 deletions(-)
 
 diff --git a/monitor/qmp.c b/monitor/qmp.c
-index 092c527b6f..0ef7cebb78 100644
+index eb181d5979..20fc0d20a6 100644
 --- a/monitor/qmp.c
 +++ b/monitor/qmp.c
-@@ -506,8 +506,7 @@ void monitor_init_qmp(Chardev *chr, bool pretty, Error **errp)
+@@ -534,8 +534,7 @@ void monitor_init_qmp(Chardev *chr, bool pretty, Error **errp)
      qemu_chr_fe_set_echo(&mon->common.chr, true);
  
      /* Note: we run QMP monitor in I/O thread when @chr supports that */

debian/patches/pve/0024-PVE-Compat-4.0-used-balloon-qemu-4-0-config-size-fal.patch

@@ -26,10 +26,10 @@ Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
  1 file changed, 2 insertions(+), 1 deletion(-)
 
 diff --git a/hw/core/machine.c b/hw/core/machine.c
-index 54e040587d..905fcdc03d 100644
+index 27dcda0248..7a13e9f014 100644
 --- a/hw/core/machine.c
 +++ b/hw/core/machine.c
-@@ -106,7 +106,8 @@ GlobalProperty hw_compat_4_0[] = {
+@@ -173,7 +173,8 @@ GlobalProperty hw_compat_4_0[] = {
      { "virtio-vga",     "edid", "false" },
      { "virtio-gpu-device", "edid", "false" },
      { "virtio-device", "use-started", "false" },

debian/patches/pve/0025-PVE-Allow-version-code-in-machine-type.patch

@@ -10,90 +10,91 @@ Version is made available as 'pve-version' in query-machines (same as,
 and only if 'is-current').
 
 Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
+Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
+[FE: adapt to QAPI changes]
+Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
 ---
- hw/core/machine-qmp-cmds.c |  6 ++++++
+ hw/core/machine-qmp-cmds.c |  5 +++++
  include/hw/boards.h        |  2 ++
- qapi/machine.json          |  4 +++-
- softmmu/vl.c               | 23 +++++++++++++++++++++++
- 4 files changed, 34 insertions(+), 1 deletion(-)
+ qapi/machine.json          |  3 +++
+ system/vl.c                | 24 ++++++++++++++++++++++++
+ 4 files changed, 34 insertions(+)
 
 diff --git a/hw/core/machine-qmp-cmds.c b/hw/core/machine-qmp-cmds.c
-index 8f8d5d5276..370e66d9cc 100644
+index 52a6d74820..362128842d 100644
 --- a/hw/core/machine-qmp-cmds.c
 +++ b/hw/core/machine-qmp-cmds.c
-@@ -102,6 +102,12 @@ MachineInfoList *qmp_query_machines(Error **errp)
+@@ -94,6 +94,11 @@ MachineInfoList *qmp_query_machines(bool has_compat_props, bool compat_props,
          if (strcmp(mc->name, MACHINE_GET_CLASS(current_machine)->name) == 0) {
              info->has_is_current = true;
              info->is_current = true;
 +
 +            // PVE version string only exists for current machine
 +            if (mc->pve_version) {
-+                info->has_pve_version = true;
 +                info->pve_version = g_strdup(mc->pve_version);
 +            }
          }
  
          if (mc->default_cpu_type) {
 diff --git a/include/hw/boards.h b/include/hw/boards.h
-index accd6eff35..1b16728389 100644
+index 48ff6d8b93..5cddeb7fcb 100644
 --- a/include/hw/boards.h
 +++ b/include/hw/boards.h
-@@ -205,6 +205,8 @@ struct MachineClass {
+@@ -252,6 +252,8 @@ struct MachineClass {
      const char *desc;
      const char *deprecation_reason;
  
 +    const char *pve_version;
 +
      void (*init)(MachineState *state);
-     void (*reset)(MachineState *state);
+     void (*reset)(MachineState *state, ShutdownCause reason);
      void (*wakeup)(MachineState *state);
 diff --git a/qapi/machine.json b/qapi/machine.json
-index cf120ac343..a6f483af4f 100644
+index 0c703316f5..dc46a3e93f 100644
 --- a/qapi/machine.json
 +++ b/qapi/machine.json
-@@ -160,6 +160,8 @@
+@@ -190,6 +190,8 @@
  #
- # @default-ram-id: the default ID of initial RAM memory backend (since 5.2)
+ # @acpi: machine type supports ACPI (since 8.0)
  #
 +# @pve-version: custom PVE version suffix specified as 'machine+pveN'
 +#
- # Since: 1.2
- ##
- { 'struct': 'MachineInfo',
-@@ -167,7 +169,7 @@
-             '*is-default': 'bool', '*is-current': 'bool', 'cpu-max': 'int',
+ # @compat-props: The machine type's compatibility properties.  Only
+ #     present when query-machines argument @compat-props is true.
+ #     (since 9.1)
+@@ -206,6 +208,7 @@
              'hotpluggable-cpus': 'bool',  'numa-mem-supported': 'bool',
              'deprecated': 'bool', '*default-cpu-type': 'str',
--            '*default-ram-id': 'str' } }
-+            '*default-ram-id': 'str', '*pve-version': 'str' } }
+             '*default-ram-id': 'str', 'acpi': 'bool',
++            '*pve-version': 'str',
+             '*compat-props': { 'type': ['CompatProperty'],
+                                'features': ['unstable'] } } }
  
- ##
- # @query-machines:
-diff --git a/softmmu/vl.c b/softmmu/vl.c
-index d87cf6e103..e5010236f3 100644
---- a/softmmu/vl.c
-+++ b/softmmu/vl.c
-@@ -1621,6 +1621,7 @@ static const QEMUOption *lookup_opt(int argc, char **argv,
- static MachineClass *select_machine(QDict *qdict, Error **errp)
+diff --git a/system/vl.c b/system/vl.c
+index 200468a753..0dbdba6421 100644
+--- a/system/vl.c
++++ b/system/vl.c
+@@ -1675,6 +1675,7 @@ static MachineClass *select_machine(QDict *qdict, Error **errp)
  {
-     const char *optarg = qdict_get_try_str(qdict, "type");
+     ERRP_GUARD();
+     const char *machine_type = qdict_get_try_str(qdict, "type");
 +    const char *pvever = qdict_get_try_str(qdict, "pvever");
-     GSList *machines = object_class_get_list(TYPE_MACHINE, false);
-     MachineClass *machine_class;
-     Error *local_err = NULL;
-@@ -1638,6 +1639,11 @@ static MachineClass *select_machine(QDict *qdict, Error **errp)
-         }
-     }
+     g_autoptr(GSList) machines = object_class_get_list(TYPE_MACHINE, false);
+     MachineClass *machine_class = NULL;
  
-+    if (machine_class) {
+@@ -1694,7 +1695,11 @@ static MachineClass *select_machine(QDict *qdict, Error **errp)
+     if (!machine_class) {
+         error_append_hint(errp,
+                           "Use -machine help to list supported machines\n");
++    } else {
 +        machine_class->pve_version = g_strdup(pvever);
 +        qdict_del(qdict, "pvever");
-+    }
+     }
 +
-     g_slist_free(machines);
-     if (local_err) {
-         error_append_hint(&local_err, "Use -machine help to list supported machines\n");
-@@ -3312,12 +3318,31 @@ void qemu_init(int argc, char **argv, char **envp)
+     return machine_class;
+ }
+ 
+@@ -3329,12 +3334,31 @@ void qemu_init(int argc, char **argv)
              case QEMU_OPTION_machine:
                  {
                      bool help;

debian/patches/pve/0026-block-backup-move-bcs-bitmap-initialization-to-job-c.patch

@@ -0,0 +1,59 @@
+From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
+From: Fabian Ebner <f.ebner@proxmox.com>
+Date: Wed, 2 Mar 2022 08:35:05 +0100
+Subject: [PATCH] block/backup: move bcs bitmap initialization to job creation
+
+For backing up the state of multiple disks from the same time, a job
+for each disk has to be created. It's convenient if the jobs don't
+have to be started at the same time and if operation of the VM can be
+resumed after job creation. This would lead to a window between job
+creation and running the job, where writes can happen. But no writes
+should happen between setting up the copy-before-write filter and
+setting up the block copy state bitmap, because then new writes would
+just pass through.
+
+Commit 06e0a9c16405c0a4c1eca33cf286cc04c42066a2 moved initalization of
+the bitmap to setting up the copy-before-write filter when sync_mode
+is not MIRROR_SYNC_MODE_BITMAP. Ensure that the bitmap is initialized
+upon job creation for the remaining case too, by moving the
+backup_init_bcs_bitmap call to backup_job_create.
+
+Signed-off-by: Fabian Ebner <f.ebner@proxmox.com>
+Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
+---
+ block/backup.c | 8 ++++----
+ 1 file changed, 4 insertions(+), 4 deletions(-)
+
+diff --git a/block/backup.c b/block/backup.c
+index 3dd2e229d2..eba5b11493 100644
+--- a/block/backup.c
++++ b/block/backup.c
+@@ -237,8 +237,8 @@ static void backup_init_bcs_bitmap(BackupBlockJob *job)
+                                          true);
+     } else if (job->sync_mode == MIRROR_SYNC_MODE_TOP) {
+         /*
+-         * We can't hog the coroutine to initialize this thoroughly.
+-         * Set a flag and resume work when we are able to yield safely.
++         * Initialization is costly here. Simply set a flag and let the
++         * backup_run coroutine resume work once it can yield safely.
+          */
+         block_copy_set_skip_unallocated(job->bcs, true);
+     }
+@@ -252,8 +252,6 @@ static int coroutine_fn backup_run(Job *job, Error **errp)
+     BackupBlockJob *s = container_of(job, BackupBlockJob, common.job);
+     int ret;
+ 
+-    backup_init_bcs_bitmap(s);
+-
+     if (s->sync_mode == MIRROR_SYNC_MODE_TOP) {
+         int64_t offset = 0;
+         int64_t count;
+@@ -502,6 +500,8 @@ BlockJob *backup_job_create(const char *job_id, BlockDriverState *bs,
+                        &error_abort);
+     bdrv_graph_wrunlock();
+ 
++    backup_init_bcs_bitmap(job);
++
+     return &job->common;
+ 
+  error:

debian/patches/pve/0027-PVE-Backup-add-vma-backup-format-code.patch

@@ -3,61 +3,71 @@ From: Dietmar Maurer <dietmar@proxmox.com>
 Date: Mon, 6 Apr 2020 12:16:57 +0200
 Subject: [PATCH] PVE-Backup: add vma backup format code
 
+Notes about partial restoring: skipping a certain drive is done via a
+map line of the form skip=drive-scsi0. Since in PVE, most archives are
+compressed and piped to vma for restore, it's not easily possible to
+skip reads.
+
+Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
+[FE: improvements during create
+     allow partial restore
+     allow specifying disk formats for create operation]
+Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
 ---
  block/meson.build |   2 +
  meson.build       |   5 +
- vma-reader.c      | 857 ++++++++++++++++++++++++++++++++++++++++++++++
- vma-writer.c      | 790 ++++++++++++++++++++++++++++++++++++++++++
- vma.c             | 839 +++++++++++++++++++++++++++++++++++++++++++++
+ vma-reader.c      | 868 ++++++++++++++++++++++++++++++++++++++++++
+ vma-writer.c      | 817 ++++++++++++++++++++++++++++++++++++++++
+ vma.c             | 941 ++++++++++++++++++++++++++++++++++++++++++++++
  vma.h             | 150 ++++++++
- 6 files changed, 2643 insertions(+)
+ 6 files changed, 2783 insertions(+)
  create mode 100644 vma-reader.c
  create mode 100644 vma-writer.c
  create mode 100644 vma.c
  create mode 100644 vma.h
 
 diff --git a/block/meson.build b/block/meson.build
-index 7a0bc3df09..9ce9246194 100644
+index 6a60b5d6b9..652c8cbdb7 100644
 --- a/block/meson.build
 +++ b/block/meson.build
-@@ -44,6 +44,8 @@ block_ss.add(files(
+@@ -42,6 +42,8 @@ block_ss.add(files(
    'zeroinit.c',
- ), zstd, zlib, gnutls)
+ ), zstd, zlib)
  
 +block_ss.add(files('../vma-writer.c'), libuuid)
 +
- softmmu_ss.add(when: 'CONFIG_TCG', if_true: files('blkreplay.c'))
+ system_ss.add(when: 'CONFIG_TCG', if_true: files('blkreplay.c'))
+ system_ss.add(files('block-ram-registrar.c'))
  
- block_ss.add(when: 'CONFIG_QCOW1', if_true: files('qcow.c'))
 diff --git a/meson.build b/meson.build
-index b3e7ec0e92..b84f62f882 100644
+index aa7ea85d0b..7eee5b4249 100644
 --- a/meson.build
 +++ b/meson.build
-@@ -1064,6 +1064,8 @@ keyutils = dependency('libkeyutils', required: false,
+@@ -2012,6 +2012,8 @@ endif
  
  has_gettid = cc.has_function('gettid')
  
 +libuuid = cc.find_library('uuid', required: true)
 +
- # Malloc tests
- 
- malloc = []
-@@ -2743,6 +2745,9 @@ if have_tools
-   qemu_nbd = executable('qemu-nbd', files('qemu-nbd.c'),
-                dependencies: [blockdev, qemuutil, gnutls], install: true)
+ # libselinux
+ selinux = dependency('libselinux',
+                      required: get_option('selinux'),
+@@ -4097,6 +4099,9 @@ if have_tools
+                dependencies: [blockdev, qemuutil, selinux],
+                install: true)
  
 +  vma = executable('vma', files('vma.c', 'vma-reader.c') + genh,
-+                   dependencies: [authz, block, crypto, io, qom], install: true)
++                   dependencies: [authz, block, crypto, io, qemuutil, qom], install: true)
 +
    subdir('storage-daemon')
-   subdir('contrib/rdmacm-mux')
-   subdir('contrib/elf2dmp')
+ 
+   foreach exe: [ 'qemu-img', 'qemu-io', 'qemu-nbd', 'qemu-storage-daemon']
 diff --git a/vma-reader.c b/vma-reader.c
 new file mode 100644
-index 0000000000..2b1d1cdab3
+index 0000000000..65015d2e1e
 --- /dev/null
 +++ b/vma-reader.c
-@@ -0,0 +1,857 @@
+@@ -0,0 +1,868 @@
 +/*
 + * VMA: Virtual Machine Archive
 + *
@@ -75,11 +85,11 @@ index 0000000000..2b1d1cdab3
 +#include <glib.h>
 +#include <uuid/uuid.h>
 +
-+#include "qemu-common.h"
 +#include "qemu/timer.h"
 +#include "qemu/ratelimit.h"
 +#include "vma.h"
 +#include "block/block.h"
++#include "block/graph-lock.h"
 +#include "sysemu/block-backend.h"
 +
 +static unsigned char zero_vma_block[VMA_BLOCK_SIZE];
@@ -89,6 +99,7 @@ index 0000000000..2b1d1cdab3
 +    bool write_zeroes;
 +    unsigned long *bitmap;
 +    int bitmap_size;
++    bool skip;
 +}  VmaRestoreState;
 +
 +struct VmaReader {
@@ -252,6 +263,9 @@ index 0000000000..2b1d1cdab3
 +        if (vmar->rstate[i].bitmap) {
 +            g_free(vmar->rstate[i].bitmap);
 +        }
++        if (vmar->rstate[i].target) {
++            blk_unref(vmar->rstate[i].target);
++        }
 +    }
 +
 +    if (vmar->md5csum) {
@@ -368,7 +382,6 @@ index 0000000000..2b1d1cdab3
 +    }
 +
 +
-+    int count = 0;
 +    for (i = 1; i < 256; i++) {
 +        VmaDeviceInfoHeader *dih = &h->dev_info[i];
 +        uint32_t devname_ptr = GUINT32_FROM_BE(dih->devname_ptr);
@@ -376,7 +389,6 @@ index 0000000000..2b1d1cdab3
 +        const char *devname =  get_header_str(vmar, devname_ptr);
 +
 +        if (size && devname) {
-+            count++;
 +            vmar->devinfo[i].size = size;
 +            vmar->devinfo[i].devname = devname;
 +
@@ -483,13 +495,14 @@ index 0000000000..2b1d1cdab3
 +}
 +
 +static void allocate_rstate(VmaReader *vmar,  guint8 dev_id,
-+                            BlockBackend *target, bool write_zeroes)
++                            BlockBackend *target, bool write_zeroes, bool skip)
 +{
 +    assert(vmar);
 +    assert(dev_id);
 +
 +    vmar->rstate[dev_id].target = target;
 +    vmar->rstate[dev_id].write_zeroes = write_zeroes;
++    vmar->rstate[dev_id].skip = skip;
 +
 +    int64_t size = vmar->devinfo[dev_id].size;
 +
@@ -504,28 +517,30 @@ index 0000000000..2b1d1cdab3
 +}
 +
 +int vma_reader_register_bs(VmaReader *vmar, guint8 dev_id, BlockBackend *target,
-+                           bool write_zeroes, Error **errp)
++                           bool write_zeroes, bool skip, Error **errp)
 +{
 +    assert(vmar);
-+    assert(target != NULL);
++    assert(target != NULL || skip);
 +    assert(dev_id);
-+    assert(vmar->rstate[dev_id].target == NULL);
++    assert(vmar->rstate[dev_id].target == NULL && !vmar->rstate[dev_id].skip);
 +
-+    int64_t size = blk_getlength(target);
-+    int64_t size_diff = size - vmar->devinfo[dev_id].size;
++    if (target != NULL) {
++        int64_t size = blk_getlength(target);
++        int64_t size_diff = size - vmar->devinfo[dev_id].size;
 +
-+    /* storage types can have different size restrictions, so it
-+     * is not always possible to create an image with exact size.
-+     * So we tolerate a size difference up to 4MB.
-+     */
-+    if ((size_diff < 0) || (size_diff > 4*1024*1024)) {
-+        error_setg(errp, "vma_reader_register_bs for stream %s failed - "
-+                   "unexpected size %zd != %zd", vmar->devinfo[dev_id].devname,
-+                   size, vmar->devinfo[dev_id].size);
-+        return -1;
++        /* storage types can have different size restrictions, so it
++         * is not always possible to create an image with exact size.
++         * So we tolerate a size difference up to 4MB.
++         */
++        if ((size_diff < 0) || (size_diff > 4*1024*1024)) {
++            error_setg(errp, "vma_reader_register_bs for stream %s failed - "
++                       "unexpected size %zd != %zd", vmar->devinfo[dev_id].devname,
++                       size, vmar->devinfo[dev_id].size);
++            return -1;
++        }
 +    }
 +
-+    allocate_rstate(vmar, dev_id, target, write_zeroes);
++    allocate_rstate(vmar, dev_id, target, write_zeroes, skip);
 +
 +    return 0;
 +}
@@ -583,10 +598,12 @@ index 0000000000..2b1d1cdab3
 +            }
 +        }
 +    } else {
-+        int res = blk_pwrite(target, sector_num * BDRV_SECTOR_SIZE, buf, nb_sectors * BDRV_SECTOR_SIZE, 0);
++        int res = blk_pwrite(target, sector_num * BDRV_SECTOR_SIZE, nb_sectors * BDRV_SECTOR_SIZE, buf, 0);
 +        if (res < 0) {
++            bdrv_graph_rdlock_main_loop();
 +            error_setg(errp, "blk_pwrite to %s failed (%d)",
 +                       bdrv_get_device_name(blk_bs(target)), res);
++            bdrv_graph_rdunlock_main_loop();
 +            return -1;
 +        }
 +    }
@@ -618,19 +635,23 @@ index 0000000000..2b1d1cdab3
 +        VmaRestoreState *rstate = &vmar->rstate[dev_id];
 +        BlockBackend *target = NULL;
 +
++        bool skip = rstate->skip;
++
 +        if (dev_id != vmar->vmstate_stream) {
 +            target = rstate->target;
-+            if (!verify && !target) {
++            if (!verify && !target && !skip) {
 +                error_setg(errp, "got wrong dev id %d", dev_id);
 +                return -1;
 +            }
 +
-+            if (vma_reader_get_bitmap(rstate, cluster_num)) {
-+                error_setg(errp, "found duplicated cluster %zd for stream %s",
-+                          cluster_num, vmar->devinfo[dev_id].devname);
-+                return -1;
++            if (!skip) {
++                if (vma_reader_get_bitmap(rstate, cluster_num)) {
++                    error_setg(errp, "found duplicated cluster %zd for stream %s",
++                              cluster_num, vmar->devinfo[dev_id].devname);
++                    return -1;
++                }
++                vma_reader_set_bitmap(rstate, cluster_num, 1);
 +            }
-+            vma_reader_set_bitmap(rstate, cluster_num, 1);
 +
 +            max_sector = vmar->devinfo[dev_id].size/BDRV_SECTOR_SIZE;
 +        } else {
@@ -676,7 +697,7 @@ index 0000000000..2b1d1cdab3
 +                return -1;
 +            }
 +
-+            if (!verify) {
++            if (!verify && !skip) {
 +                int nb_sectors = end_sector - sector_num;
 +                if (restore_write_data(vmar, dev_id, target, vmstate_fd,
 +                                       buf + start, sector_num, nb_sectors,
@@ -712,7 +733,7 @@ index 0000000000..2b1d1cdab3
 +                        return -1;
 +                    }
 +
-+                    if (!verify) {
++                    if (!verify && !skip) {
 +                        int nb_sectors = end_sector - sector_num;
 +                        if (restore_write_data(vmar, dev_id, target, vmstate_fd,
 +                                               buf + start, sector_num,
@@ -737,7 +758,7 @@ index 0000000000..2b1d1cdab3
 +                            vmar->partial_zero_cluster_data += zero_size;
 +                        }
 +
-+                        if (rstate->write_zeroes && !verify) {
++                        if (rstate->write_zeroes && !verify && !skip) {
 +                            if (restore_write_data(vmar, dev_id, target, vmstate_fd,
 +                                                   zero_vma_block, sector_num,
 +                                                   nb_sectors, errp) < 0) {
@@ -908,7 +929,7 @@ index 0000000000..2b1d1cdab3
 +
 +    for (dev_id = 1; dev_id < 255; dev_id++) {
 +        if (vma_reader_get_device_info(vmar, dev_id)) {
-+            allocate_rstate(vmar, dev_id, NULL, false);
++            allocate_rstate(vmar, dev_id, NULL, false, false);
 +        }
 +    }
 +
@@ -917,10 +938,10 @@ index 0000000000..2b1d1cdab3
 +
 diff --git a/vma-writer.c b/vma-writer.c
 new file mode 100644
-index 0000000000..11d8321ffd
+index 0000000000..a466652a5d
 --- /dev/null
 +++ b/vma-writer.c
-@@ -0,0 +1,790 @@
+@@ -0,0 +1,817 @@
 +/*
 + * VMA: Virtual Machine Archive
 + *
@@ -936,6 +957,8 @@ index 0000000000..11d8321ffd
 +
 +#include "qemu/osdep.h"
 +#include <glib.h>
++#include <linux/magic.h>
++#include <sys/vfs.h>
 +#include <uuid/uuid.h>
 +
 +#include "vma.h"
@@ -944,6 +967,8 @@ index 0000000000..11d8321ffd
 +#include "qemu/main-loop.h"
 +#include "qemu/coroutine.h"
 +#include "qemu/cutils.h"
++#include "qemu/error-report.h"
++#include "qemu/memalign.h"
 +
 +#define DEBUG_VMA 0
 +
@@ -1126,10 +1151,10 @@ index 0000000000..11d8321ffd
 +{
 +    assert(qemu_in_coroutine());
 +    AioContext *ctx = qemu_get_current_aio_context();
-+    aio_set_fd_handler(ctx, fd, false, NULL, (IOHandler *)qemu_coroutine_enter,
++    aio_set_fd_handler(ctx, fd, NULL, (IOHandler *)qemu_coroutine_enter, NULL,
 +                       NULL, qemu_coroutine_self());
 +    qemu_coroutine_yield();
-+    aio_set_fd_handler(ctx, fd, false, NULL, NULL, NULL, NULL);
++    aio_set_fd_handler(ctx, fd, NULL, NULL, NULL, NULL, NULL);
 +}
 +
 +static ssize_t coroutine_fn
@@ -1178,6 +1203,23 @@ index 0000000000..11d8321ffd
 +    return (done == bytes) ? bytes : -1;
 +}
 +
++static bool is_path_tmpfs(const char *path) {
++    struct statfs fs;
++    int ret;
++
++    do {
++        ret = statfs(path, &fs);
++    } while (ret != 0 && errno == EINTR);
++
++    if (ret != 0) {
++        warn_report("statfs call for %s failed, assuming not tmpfs - %s\n",
++                    path, strerror(errno));
++        return false;
++    }
++
++    return fs.f_type == TMPFS_MAGIC;
++}
++
 +VmaWriter *vma_writer_create(const char *filename, uuid_t uuid, Error **errp)
 +{
 +    const char *p;
@@ -1227,12 +1269,19 @@ index 0000000000..11d8321ffd
 +            }
 +            /* try to use O_NONBLOCK */
 +            fcntl(vmaw->fd, F_SETFL, fcntl(vmaw->fd, F_GETFL)|O_NONBLOCK);
-+        } else  {
-+            oflags = O_NONBLOCK|O_DIRECT|O_WRONLY|O_EXCL;
++        } else {
++            gchar *dirname = g_path_get_dirname(filename);
++            oflags = O_NONBLOCK|O_WRONLY|O_EXCL;
++            if (!is_path_tmpfs(dirname)) {
++                oflags |= O_DIRECT;
++            }
++            g_free(dirname);
 +            vmaw->fd = qemu_create(filename, oflags, 0644, errp);
 +        }
 +
 +        if (vmaw->fd < 0) {
++            error_free(*errp);
++            *errp = NULL;
 +            error_setg(errp, "can't open file %s - %s\n", filename,
 +                       g_strerror(errno));
 +            goto err;
@@ -1467,17 +1516,16 @@ index 0000000000..11d8321ffd
 +    int i;
 +
 +    g_assert(vmaw != NULL);
++    g_assert(status != NULL);
 +
-+    if (status) {
-+        status->status = vmaw->status;
-+        g_strlcpy(status->errmsg, vmaw->errmsg, sizeof(status->errmsg));
-+        for (i = 0; i <= 255; i++) {
-+            status->stream_info[i] = vmaw->stream_info[i];
-+        }
-+
-+        uuid_unparse_lower(vmaw->uuid, status->uuid_str);
++    status->status = vmaw->status;
++    g_strlcpy(status->errmsg, vmaw->errmsg, sizeof(status->errmsg));
++    for (i = 0; i <= 255; i++) {
++        status->stream_info[i] = vmaw->stream_info[i];
 +    }
 +
++    uuid_unparse_lower(vmaw->uuid, status->uuid_str);
++
 +    status->closed = vmaw->closed;
 +
 +    return vmaw->status;
@@ -1713,10 +1761,10 @@ index 0000000000..11d8321ffd
 +}
 diff --git a/vma.c b/vma.c
 new file mode 100644
-index 0000000000..2eea2fc281
+index 0000000000..8d4b4be414
 --- /dev/null
 +++ b/vma.c
-@@ -0,0 +1,839 @@
+@@ -0,0 +1,941 @@
 +/*
 + * VMA: Virtual Machine Archive
 + *
@@ -1734,11 +1782,11 @@ index 0000000000..2eea2fc281
 +#include <glib.h>
 +
 +#include "vma.h"
-+#include "qemu-common.h"
 +#include "qemu/module.h"
 +#include "qemu/error-report.h"
 +#include "qemu/main-loop.h"
 +#include "qemu/cutils.h"
++#include "qemu/memalign.h"
 +#include "qapi/qmp/qdict.h"
 +#include "sysemu/block-backend.h"
 +
@@ -1748,9 +1796,9 @@ index 0000000000..2eea2fc281
 +        "usage: vma command [command options]\n"
 +        "\n"
 +        "vma list <filename>\n"
-+        "vma config <filename> [-c config]\n"
-+        "vma create <filename> [-c config] pathname ...\n"
-+        "vma extract <filename> [-r <fifo>] <targetdir>\n"
++        "vma config <filename> [-c <config>]\n"
++        "vma create <filename> [-c <config>] [-d format=<format>:<device name>=<path> [-d ...]]\n"
++        "vma extract <filename> [-d <drive-list>] [-r <fifo>] <targetdir>\n"
 +        "vma verify <filename> [-v]\n"
 +        ;
 +
@@ -1857,6 +1905,7 @@ index 0000000000..2eea2fc281
 +    char *throttling_group;
 +    char *cache;
 +    bool write_zero;
++    bool skip;
 +} RestoreMap;
 +
 +static bool try_parse_option(char **line, const char *optname, char **out, const char *inbuf) {
@@ -1894,9 +1943,10 @@ index 0000000000..2eea2fc281
 +    const char *filename;
 +    const char *dirname;
 +    const char *readmap = NULL;
++    gchar **drive_list = NULL;
 +
 +    for (;;) {
-+        c = getopt(argc, argv, "hvr:");
++        c = getopt(argc, argv, "hvd:r:");
 +        if (c == -1) {
 +            break;
 +        }
@@ -1905,6 +1955,9 @@ index 0000000000..2eea2fc281
 +        case 'h':
 +            help();
 +            break;
++        case 'd':
++            drive_list = g_strsplit(optarg, ",", 254);
++            break;
 +        case 'r':
 +            readmap = optarg;
 +            break;
@@ -1964,76 +2017,89 @@ index 0000000000..2eea2fc281
 +            char *bps = NULL;
 +            char *group = NULL;
 +            char *cache = NULL;
++            char *devname = NULL;
++            bool skip = false;
++            uint64_t bps_value = 0;
++            const char *path = NULL;
++            bool write_zero = true;
++
 +            if (!line || line[0] == '\0' || !strcmp(line, "done\n")) {
 +                break;
 +            }
 +            int len = strlen(line);
 +            if (line[len - 1] == '\n') {
 +                line[len - 1] = '\0';
-+                if (len == 1) {
++                len = len - 1;
++                if (len == 0) {
 +                    break;
 +                }
 +            }
 +
-+            while (1) {
-+                if (!try_parse_option(&line, "format", &format, inbuf) &&
-+                    !try_parse_option(&line, "throttling.bps", &bps, inbuf) &&
-+                    !try_parse_option(&line, "throttling.group", &group, inbuf) &&
-+                    !try_parse_option(&line, "cache", &cache, inbuf))
-+                {
-+                    break;
++            if (strncmp(line, "skip", 4) == 0) {
++                if (len < 6 || line[4] != '=') {
++                    g_error("read map failed - option 'skip' has no value ('%s')",
++                            inbuf);
++                } else {
++                    devname = line + 5;
++                    skip = true;
 +                }
-+            }
-+
-+            uint64_t bps_value = 0;
-+            if (bps) {
-+                bps_value = verify_u64(bps);
-+                g_free(bps);
-+            }
-+
-+            const char *path;
-+            bool write_zero;
-+            if (line[0] == '0' && line[1] == ':') {
-+                path = line + 2;
-+                write_zero = false;
-+            } else if (line[0] == '1' && line[1] == ':') {
-+                path = line + 2;
-+                write_zero = true;
 +            } else {
-+                g_error("read map failed - parse error ('%s')", inbuf);
++                while (1) {
++                    if (!try_parse_option(&line, "format", &format, inbuf) &&
++                        !try_parse_option(&line, "throttling.bps", &bps, inbuf) &&
++                        !try_parse_option(&line, "throttling.group", &group, inbuf) &&
++                        !try_parse_option(&line, "cache", &cache, inbuf))
++                    {
++                        break;
++                    }
++                }
++
++                if (bps) {
++                    bps_value = verify_u64(bps);
++                    g_free(bps);
++                }
++
++                if (line[0] == '0' && line[1] == ':') {
++                    path = line + 2;
++                    write_zero = false;
++                } else if (line[0] == '1' && line[1] == ':') {
++                    path = line + 2;
++                    write_zero = true;
++                } else {
++                    g_error("read map failed - parse error ('%s')", inbuf);
++                }
++
++                path = extract_devname(path, &devname, -1);
 +            }
 +
-+            char *devname = NULL;
-+            path = extract_devname(path, &devname, -1);
 +            if (!devname) {
 +                g_error("read map failed - no dev name specified ('%s')",
 +                        inbuf);
 +            }
 +
-+            RestoreMap *map = g_new0(RestoreMap, 1);
-+            map->devname = g_strdup(devname);
-+            map->path = g_strdup(path);
-+            map->format = format;
-+            map->throttling_bps = bps_value;
-+            map->throttling_group = group;
-+            map->cache = cache;
-+            map->write_zero = write_zero;
++            RestoreMap *restore_map = g_new0(RestoreMap, 1);
++            restore_map->devname = g_strdup(devname);
++            restore_map->path = g_strdup(path);
++            restore_map->format = format;
++            restore_map->throttling_bps = bps_value;
++            restore_map->throttling_group = group;
++            restore_map->cache = cache;
++            restore_map->write_zero = write_zero;
++            restore_map->skip = skip;
 +
-+            g_hash_table_insert(devmap, map->devname, map);
++            g_hash_table_insert(devmap, restore_map->devname, restore_map);
 +
 +        };
 +    }
 +
 +    int i;
 +    int vmstate_fd = -1;
-+    guint8 vmstate_stream = 0;
-+
-+    BlockBackend *blk = NULL;
++    bool drive_rename_bitmap[255];
++    memset(drive_rename_bitmap, 0, sizeof(drive_rename_bitmap));
 +
 +    for (i = 1; i < 255; i++) {
 +        VmaDeviceInfo *di = vma_reader_get_device_info(vmar, i);
 +        if (di && (strcmp(di->devname, "vmstate") == 0)) {
-+            vmstate_stream = i;
 +            char *statefn = g_strdup_printf("%s/vmstate.bin", dirname);
 +            vmstate_fd = open(statefn, O_WRONLY|O_CREAT|O_EXCL, 0644);
 +            if (vmstate_fd < 0) {
@@ -2049,8 +2115,25 @@ index 0000000000..2eea2fc281
 +            const char *cache = NULL;
 +            int flags = BDRV_O_RDWR;
 +            bool write_zero = true;
++            bool skip = false;
 +
-+            if (readmap) {
++            BlockBackend *blk = NULL;
++
++            if (drive_list) {
++                skip = true;
++                int j;
++                for (j = 0; drive_list[j]; j++) {
++                    if (strcmp(drive_list[j], di->devname) == 0) {
++                        skip = false;
++                        drive_rename_bitmap[i] = true;
++                        break;
++                    }
++                }
++            } else {
++                drive_rename_bitmap[i] = true;
++            }
++
++            if (!skip && readmap) {
 +                RestoreMap *map;
 +                map = (RestoreMap *)g_hash_table_lookup(devmap, di->devname);
 +                if (map == NULL) {
@@ -2062,7 +2145,8 @@ index 0000000000..2eea2fc281
 +                throttling_group = map->throttling_group;
 +                cache = map->cache;
 +                write_zero = map->write_zero;
-+            } else {
++                skip = map->skip;
++            } else if (!skip) {
 +                devfn = g_strdup_printf("%s/tmp-disk-%s.raw",
 +                                        dirname, di->devname);
 +                printf("DEVINFO %s %zd\n", devfn, di->size);
@@ -2080,57 +2164,60 @@ index 0000000000..2eea2fc281
 +                write_zero = false;
 +            }
 +
-+	    size_t devlen = strlen(devfn);
-+	    QDict *options = NULL;
-+            bool writethrough;
-+            if (format) {
-+                /* explicit format from commandline */
-+                options = qdict_new();
-+                qdict_put_str(options, "driver", format);
-+            } else if ((devlen > 4 && strcmp(devfn+devlen-4, ".raw") == 0) ||
-+	               strncmp(devfn, "/dev/", 5) == 0)
-+	    {
-+                /* This part is now deprecated for PVE as well (just as qemu
-+                 * deprecated not specifying an explicit raw format, too.
-+                 */
-+		/* explicit raw format */
-+		options = qdict_new();
-+		qdict_put_str(options, "driver", "raw");
-+	    }
-+            if (cache && bdrv_parse_cache_mode(cache, &flags, &writethrough)) {
-+                g_error("invalid cache option: %s\n", cache);
-+            }
-+
-+	    if (errp || !(blk = blk_new_open(devfn, NULL, options, flags, &errp))) {
-+                g_error("can't open file %s - %s", devfn,
-+                        error_get_pretty(errp));
-+            }
-+
-+            if (cache) {
-+                blk_set_enable_write_cache(blk, !writethrough);
-+            }
-+
-+            if (throttling_group) {
-+                blk_io_limits_enable(blk, throttling_group);
-+            }
-+
-+            if (throttling_bps) {
-+                if (!throttling_group) {
-+                    blk_io_limits_enable(blk, devfn);
++            if (!skip) {
++                size_t devlen = strlen(devfn);
++                QDict *options = NULL;
++                bool writethrough;
++                if (format) {
++                    /* explicit format from commandline */
++                    options = qdict_new();
++                    qdict_put_str(options, "driver", format);
++                } else if ((devlen > 4 && strcmp(devfn+devlen-4, ".raw") == 0) ||
++                    strncmp(devfn, "/dev/", 5) == 0)
++                {
++                    /* This part is now deprecated for PVE as well (just as qemu
++                     * deprecated not specifying an explicit raw format, too.
++                     */
++                    /* explicit raw format */
++                    options = qdict_new();
++                    qdict_put_str(options, "driver", "raw");
 +                }
 +
-+                ThrottleConfig cfg;
-+                throttle_config_init(&cfg);
-+                cfg.buckets[THROTTLE_BPS_WRITE].avg = throttling_bps;
-+                Error *err = NULL;
-+                if (!throttle_is_valid(&cfg, &err)) {
-+                    error_report_err(err);
-+                    g_error("failed to apply throttling");
++                if (cache && bdrv_parse_cache_mode(cache, &flags, &writethrough)) {
++                    g_error("invalid cache option: %s\n", cache);
++                }
++
++                if (errp || !(blk = blk_new_open(devfn, NULL, options, flags, &errp))) {
++                    g_error("can't open file %s - %s", devfn,
++                            error_get_pretty(errp));
++                }
++
++                if (cache) {
++                    blk_set_enable_write_cache(blk, !writethrough);
++                }
++
++                if (throttling_group) {
++                    blk_io_limits_enable(blk, throttling_group);
++                }
++
++                if (throttling_bps) {
++                    if (!throttling_group) {
++                        blk_io_limits_enable(blk, devfn);
++                    }
++
++                    ThrottleConfig cfg;
++                    throttle_config_init(&cfg);
++                    cfg.buckets[THROTTLE_BPS_WRITE].avg = throttling_bps;
++                    Error *err = NULL;
++                    if (!throttle_is_valid(&cfg, &err)) {
++                        error_report_err(err);
++                        g_error("failed to apply throttling");
++                    }
++                    blk_set_io_limits(blk, &cfg);
 +                }
-+                blk_set_io_limits(blk, &cfg);
 +            }
 +
-+            if (vma_reader_register_bs(vmar, i, blk, write_zero, &errp) < 0) {
++            if (vma_reader_register_bs(vmar, i, blk, write_zero, skip, &errp) < 0) {
 +                g_error("%s", error_get_pretty(errp));
 +            }
 +
@@ -2140,6 +2227,10 @@ index 0000000000..2eea2fc281
 +        }
 +    }
 +
++    if (drive_list) {
++        g_strfreev(drive_list);
++    }
++
 +    if (vma_reader_restore(vmar, vmstate_fd, verbose, &errp) < 0) {
 +        g_error("restore failed - %s", error_get_pretty(errp));
 +    }
@@ -2147,7 +2238,7 @@ index 0000000000..2eea2fc281
 +    if (!readmap) {
 +        for (i = 1; i < 255; i++) {
 +            VmaDeviceInfo *di = vma_reader_get_device_info(vmar, i);
-+            if (di && (i != vmstate_stream)) {
++            if (di && drive_rename_bitmap[i]) {
 +                char *tmpfn = g_strdup_printf("%s/tmp-disk-%s.raw",
 +                                              dirname, di->devname);
 +                char *fn = g_strdup_printf("%s/disk-%s.raw",
@@ -2162,8 +2253,6 @@ index 0000000000..2eea2fc281
 +
 +    vma_reader_destroy(vmar);
 +
-+    blk_unref(blk);
-+
 +    bdrv_close_all();
 +
 +    return ret;
@@ -2248,7 +2337,7 @@ index 0000000000..2eea2fc281
 +    struct iovec iov;
 +    QEMUIOVector qiov;
 +
-+    int64_t start, end;
++    int64_t start, end, readlen;
 +    int ret = 0;
 +
 +    unsigned char *buf = blk_blockalign(job->target, VMA_CLUSTER_SIZE);
@@ -2262,16 +2351,24 @@ index 0000000000..2eea2fc281
 +        iov.iov_len = VMA_CLUSTER_SIZE;
 +        qemu_iovec_init_external(&qiov, &iov, 1);
 +
++        if (start + 1 == end) {
++            memset(buf, 0, VMA_CLUSTER_SIZE);
++            readlen = job->len - start * VMA_CLUSTER_SIZE;
++            assert(readlen > 0 && readlen <= VMA_CLUSTER_SIZE);
++        } else {
++            readlen = VMA_CLUSTER_SIZE;
++        }
++
 +        ret = blk_co_preadv(job->target, start * VMA_CLUSTER_SIZE,
-+                            VMA_CLUSTER_SIZE, &qiov, 0);
++                            readlen, &qiov, 0);
 +        if (ret < 0) {
-+            vma_writer_set_error(job->vmaw, "read error", -1);
++            vma_writer_set_error(job->vmaw, "read error");
 +            goto out;
 +        }
 +
 +        size_t zb = 0;
 +        if (vma_writer_write(job->vmaw, job->dev_id, start, buf, &zb) < 0) {
-+            vma_writer_set_error(job->vmaw, "backup_dump_cb vma_writer_write failed", -1);
++            vma_writer_set_error(job->vmaw, "backup_dump_cb vma_writer_write failed");
 +            goto out;
 +        }
 +    }
@@ -2289,13 +2386,16 @@ index 0000000000..2eea2fc281
 +
 +static int create_archive(int argc, char **argv)
 +{
-+    int i, c;
++    int c;
 +    int verbose = 0;
++    bool expect_format = true;
 +    const char *archivename;
++    GList *backup_coroutines = NULL;
 +    GList *config_files = NULL;
++    GList *disk_infos = NULL;
 +
 +    for (;;) {
-+        c = getopt(argc, argv, "hvc:");
++        c = getopt(argc, argv, "hvc:d:");
 +        if (c == -1) {
 +            break;
 +        }
@@ -2307,6 +2407,9 @@ index 0000000000..2eea2fc281
 +        case 'c':
 +            config_files = g_list_append(config_files, optarg);
 +            break;
++        case 'd':
++            disk_infos = g_list_append(disk_infos, optarg);
++            break;
 +        case 'v':
 +            verbose = 1;
 +            break;
@@ -2352,16 +2455,48 @@ index 0000000000..2eea2fc281
 +        l = g_list_next(l);
 +    }
 +
-+    int devcount = 0;
++    /*
++     * Don't allow mixing new and old way to specifiy disks.
++     * TODO PVE 9 drop old way and always require format.
++     */
++    if (optind < argc && g_list_first(disk_infos)) {
++        unlink(archivename);
++        g_error("Unexpected extra argument - specify all devices via '-d'");
++    }
++
 +    while (optind < argc) {
-+        const char *path = argv[optind++];
++        expect_format = false;
++        disk_infos = g_list_append(disk_infos, argv[optind++]);
++    }
++
++    int devcount = 0;
++    GList *disk_l = disk_infos;
++    while (disk_l && disk_l->data) {
++        char *disk_info = disk_l->data;
++        const char *path = NULL;
 +        char *devname = NULL;
-+        path = extract_devname(path, &devname, devcount++);
++        char *format = NULL;
++        QDict *options = qdict_new();
++
++        if (try_parse_option(&disk_info, "format", &format, disk_info)) {
++            qdict_put_str(options, "driver", format);
++        } else {
++            if (expect_format) {
++                unlink(archivename);
++                g_error("No format specified for device: '%s'", disk_info);
++            } else {
++                g_warning("Specifying a device without a format is deprecated"
++                          " - use '-d format=<format>:%s'",
++                          disk_info);
++            }
++        }
++
++        path = extract_devname(disk_info, &devname, devcount++);
 +
 +        Error *errp = NULL;
 +        BlockBackend *target;
 +
-+        target = blk_new_open(path, NULL, NULL, 0, &errp);
++        target = blk_new_open(path, NULL, options, 0, &errp);
 +        if (!target) {
 +            unlink(archivename);
 +            g_error("bdrv_open '%s' failed - %s", path, error_get_pretty(errp));
@@ -2380,7 +2515,11 @@ index 0000000000..2eea2fc281
 +        job->dev_id = dev_id;
 +
 +        Coroutine *co = qemu_coroutine_create(backup_run, job);
-+        qemu_coroutine_enter(co);
++        // Don't enter coroutine yet, because it might write the header before
++        // all streams can be registered.
++        backup_coroutines = g_list_append(backup_coroutines, co);
++
++        disk_l = g_list_next(disk_l);
 +    }
 +
 +    VmaStatus vmastat;
@@ -2388,6 +2527,13 @@ index 0000000000..2eea2fc281
 +    int last_percent = -1;
 +
 +    if (devcount) {
++        GList *entry = backup_coroutines;
++        while (entry && entry->data) {
++            Coroutine *co = entry->data;
++            qemu_coroutine_enter(co);
++            entry = g_list_next(entry);
++        }
++
 +        while (1) {
 +            main_loop_wait(false);
 +            vma_writer_get_status(vmaw, &vmastat);
@@ -2437,6 +2583,7 @@ index 0000000000..2eea2fc281
 +    vma_writer_get_status(vmaw, &vmastat);
 +
 +    if (verbose) {
++        int i;
 +        for (i = 0; i < 256; i++) {
 +            VmaStreamInfo *si = &vmastat.stream_info[i];
 +            if (si->size) {
@@ -2452,6 +2599,9 @@ index 0000000000..2eea2fc281
 +        g_error("creating vma archive failed");
 +    }
 +
++    g_list_free(backup_coroutines);
++    g_list_free(config_files);
++    g_list_free(disk_infos);
 +    vma_writer_destroy(vmaw);
 +    return 0;
 +}
@@ -2558,7 +2708,7 @@ index 0000000000..2eea2fc281
 +}
 diff --git a/vma.h b/vma.h
 new file mode 100644
-index 0000000000..c895c97f6d
+index 0000000000..86d2873aa5
 --- /dev/null
 +++ b/vma.h
 @@ -0,0 +1,150 @@
@@ -2696,7 +2846,7 @@ index 0000000000..c895c97f6d
 +int coroutine_fn vma_writer_flush_output(VmaWriter *vmaw);
 +
 +int vma_writer_get_status(VmaWriter *vmaw, VmaStatus *status);
-+void vma_writer_set_error(VmaWriter *vmaw, const char *fmt, ...);
++void vma_writer_set_error(VmaWriter *vmaw, const char *fmt, ...) G_GNUC_PRINTF(2, 3);
 +
 +
 +VmaReader *vma_reader_create(const char *filename, Error **errp);
@@ -2706,7 +2856,7 @@ index 0000000000..c895c97f6d
 +VmaDeviceInfo *vma_reader_get_device_info(VmaReader *vmar, guint8 dev_id);
 +int vma_reader_register_bs(VmaReader *vmar, guint8 dev_id,
 +                           BlockBackend *target, bool write_zeroes,
-+                           Error **errp);
++                           bool skip, Error **errp);
 +int vma_reader_restore(VmaReader *vmar, int vmstate_fd, bool verbose,
 +                       Error **errp);
 +int vma_reader_verify(VmaReader *vmar, bool verbose, Error **errp);

debian/patches/pve/0028-PVE-Backup-add-backup-dump-block-driver.patch

@@ -7,21 +7,25 @@ Subject: [PATCH] PVE-Backup: add backup-dump block driver
 - move BackupBlockJob declaration from block/backup.c to include/block/block_int.h
 - block/backup.c - backup-job-create: also consider source cluster size
 - job.c: make job_should_pause non-static
+
+Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
+[FE: adapt to coroutine changes]
+Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
 ---
- block/backup-dump.c       | 168 ++++++++++++++++++++++++++++++++++++++
- block/backup.c            |  32 +++-----
- block/meson.build         |   1 +
- include/block/block_int.h |  35 ++++++++
- job.c                     |   3 +-
- 5 files changed, 216 insertions(+), 23 deletions(-)
+ block/backup-dump.c              | 172 +++++++++++++++++++++++++++++++
+ block/backup.c                   |  30 ++----
+ block/meson.build                |   1 +
+ include/block/block_int-common.h |  35 +++++++
+ job.c                            |   3 +-
+ 5 files changed, 218 insertions(+), 23 deletions(-)
  create mode 100644 block/backup-dump.c
 
 diff --git a/block/backup-dump.c b/block/backup-dump.c
 new file mode 100644
-index 0000000000..93d7f46950
+index 0000000000..e46abf1070
 --- /dev/null
 +++ b/block/backup-dump.c
-@@ -0,0 +1,168 @@
+@@ -0,0 +1,172 @@
 +/*
 + * BlockDriver to send backup data stream to a callback function
 + *
@@ -33,7 +37,8 @@ index 0000000000..93d7f46950
 + */
 +
 +#include "qemu/osdep.h"
-+#include "qemu-common.h"
++
++#include "qapi/qmp/qdict.h"
 +#include "qom/object_interfaces.h"
 +#include "block/block_int.h"
 +
@@ -44,7 +49,8 @@ index 0000000000..93d7f46950
 +    void           *dump_cb_data;
 +} BDRVBackupDumpState;
 +
-+static int qemu_backup_dump_get_info(BlockDriverState *bs, BlockDriverInfo *bdi)
++static coroutine_fn int qemu_backup_dump_co_get_info(BlockDriverState *bs,
++                                                     BlockDriverInfo *bdi)
 +{
 +    BDRVBackupDumpState *s = bs->opaque;
 +
@@ -85,7 +91,7 @@ index 0000000000..93d7f46950
 +    /* Nothing to do. */
 +}
 +
-+static int64_t qemu_backup_dump_getlength(BlockDriverState *bs)
++static coroutine_fn int64_t qemu_backup_dump_co_getlength(BlockDriverState *bs)
 +{
 +    BDRVBackupDumpState *s = bs->opaque;
 +
@@ -145,8 +151,8 @@ index 0000000000..93d7f46950
 +
 +    .bdrv_close                   = qemu_backup_dump_close,
 +    .bdrv_has_zero_init           = bdrv_has_zero_init_1,
-+    .bdrv_getlength               = qemu_backup_dump_getlength,
-+    .bdrv_get_info                = qemu_backup_dump_get_info,
++    .bdrv_co_getlength            = qemu_backup_dump_co_getlength,
++    .bdrv_co_get_info             = qemu_backup_dump_co_get_info,
 +
 +    .bdrv_co_writev               = qemu_backup_dump_co_writev,
 +
@@ -165,7 +171,7 @@ index 0000000000..93d7f46950
 +block_init(bdrv_backup_dump_init);
 +
 +
-+BlockDriverState *bdrv_backup_dump_create(
++BlockDriverState *coroutine_fn bdrv_co_backup_dump_create(
 +    int dump_cb_block_size,
 +    uint64_t byte_size,
 +    BackupDumpFunc *dump_cb,
@@ -173,9 +179,11 @@ index 0000000000..93d7f46950
 +    Error **errp)
 +{
 +    BDRVBackupDumpState *state;
-+    BlockDriverState *bs = bdrv_new_open_driver(
-+        &bdrv_backup_dump_drive, NULL, BDRV_O_RDWR, errp);
 +
++    QDict *options = qdict_new();
++    qdict_put_str(options, "driver", "backup-dump-drive");
++
++    BlockDriverState *bs = bdrv_co_open(NULL, NULL, options, BDRV_O_RDWR, errp);
 +    if (!bs) {
 +        return NULL;
 +    }
@@ -191,16 +199,16 @@ index 0000000000..93d7f46950
 +    return bs;
 +}
 diff --git a/block/backup.c b/block/backup.c
-index bd3614ce70..8bae9b060e 100644
+index eba5b11493..1963e47ab9 100644
 --- a/block/backup.c
 +++ b/block/backup.c
-@@ -31,28 +31,6 @@
+@@ -29,28 +29,6 @@
  
- #define BACKUP_CLUSTER_SIZE_DEFAULT (1 << 16)
+ #include "block/copy-before-write.h"
  
 -typedef struct BackupBlockJob {
 -    BlockJob common;
--    BlockDriverState *backup_top;
+-    BlockDriverState *cbw;
 -    BlockDriverState *source_bs;
 -    BlockDriverState *target_bs;
 -
@@ -223,11 +231,10 @@ index bd3614ce70..8bae9b060e 100644
  static const BlockJobDriver backup_job_driver;
  
  static void backup_cleanup_sync_bitmap(BackupBlockJob *job, int ret)
-@@ -504,6 +482,16 @@ BlockJob *backup_job_create(const char *job_id, BlockDriverState *bs,
-         goto error;
+@@ -462,6 +440,14 @@ BlockJob *backup_job_create(const char *job_id, BlockDriverState *bs,
      }
  
-+    cluster_size = backup_calculate_cluster_size(target, errp);
+     cluster_size = block_copy_cluster_size(bcs);
 +    if (cluster_size < 0) {
 +        goto error;
 +    }
@@ -236,12 +243,11 @@ index bd3614ce70..8bae9b060e 100644
 +    if (bdrv_get_info(bs, &bdi) == 0) {
 +        cluster_size = MAX(cluster_size, bdi.cluster_size);
 +    }
-+
-     /*
-      * If source is in backing chain of target assume that target is going to be
-      * used for "image fleecing", i.e. it should represent a kind of snapshot of
+ 
+     if (perf->max_chunk && perf->max_chunk < cluster_size) {
+         error_setg(errp, "Required max-chunk (%" PRIi64 ") is less than backup "
 diff --git a/block/meson.build b/block/meson.build
-index 9ce9246194..19bc2b7cbb 100644
+index 652c8cbdb7..e1cf5a2e65 100644
 --- a/block/meson.build
 +++ b/block/meson.build
 @@ -4,6 +4,7 @@ block_ss.add(files(
@@ -249,28 +255,28 @@ index 9ce9246194..19bc2b7cbb 100644
    'amend.c',
    'backup.c',
 +  'backup-dump.c',
-   'backup-top.c',
    'blkdebug.c',
    'blklogwrites.c',
-diff --git a/include/block/block_int.h b/include/block/block_int.h
-index 3e625a4261..4bd5fdb191 100644
---- a/include/block/block_int.h
-+++ b/include/block/block_int.h
+   'blkverify.c',
+diff --git a/include/block/block_int-common.h b/include/block/block_int-common.h
+index ebb4e56a50..e717a74e5f 100644
+--- a/include/block/block_int-common.h
++++ b/include/block/block_int-common.h
 @@ -26,6 +26,7 @@
  
- #include "block/accounting.h"
- #include "block/block.h"
+ #include "block/aio.h"
+ #include "block/block-common.h"
 +#include "block/block-copy.h"
- #include "block/aio-wait.h"
- #include "qemu/queue.h"
- #include "qemu/coroutine.h"
-@@ -63,6 +64,40 @@
+ #include "block/block-global-state.h"
+ #include "block/snapshot.h"
+ #include "qemu/iov.h"
+@@ -60,6 +61,40 @@
  
  #define BLOCK_PROBE_BUF_SIZE        512
  
 +typedef int BackupDumpFunc(void *opaque, uint64_t offset, uint64_t bytes, const void *buf);
 +
-+BlockDriverState *bdrv_backuo_dump_create(
++BlockDriverState *coroutine_fn bdrv_co_backup_dump_create(
 +    int dump_cb_block_size,
 +    uint64_t byte_size,
 +    BackupDumpFunc *dump_cb,
@@ -282,7 +288,7 @@ index 3e625a4261..4bd5fdb191 100644
 +typedef struct BlockCopyState BlockCopyState;
 +typedef struct BackupBlockJob {
 +    BlockJob common;
-+    BlockDriverState *backup_top;
++    BlockDriverState *cbw;
 +    BlockDriverState *source_bs;
 +    BlockDriverState *target_bs;
 +
@@ -306,16 +312,16 @@ index 3e625a4261..4bd5fdb191 100644
      BDRV_TRACKED_READ,
      BDRV_TRACKED_WRITE,
 diff --git a/job.c b/job.c
-index e7a5d28854..44eec9a441 100644
+index 660ce22c56..baf54c8d60 100644
 --- a/job.c
 +++ b/job.c
-@@ -269,7 +269,8 @@ static bool job_started(Job *job)
-     return job->co;
+@@ -331,7 +331,8 @@ static bool job_started_locked(Job *job)
  }
  
--static bool job_should_pause(Job *job)
-+bool job_should_pause(Job *job);
-+bool job_should_pause(Job *job)
+ /* Called with job_mutex held. */
+-static bool job_should_pause_locked(Job *job)
++bool job_should_pause_locked(Job *job);
++bool job_should_pause_locked(Job *job)
  {
      return job->pause_count > 0;
  }

debian/patches/pve/0029-PVE-Add-sequential-job-transaction-support.patch

@@ -4,16 +4,17 @@ Date: Thu, 20 Aug 2020 14:31:59 +0200
 Subject: [PATCH] PVE: Add sequential job transaction support
 
 Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
+Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
 ---
  include/qemu/job.h | 12 ++++++++++++
- job.c              | 31 +++++++++++++++++++++++++++++++
- 2 files changed, 43 insertions(+)
+ job.c              | 34 ++++++++++++++++++++++++++++++++++
+ 2 files changed, 46 insertions(+)
 
 diff --git a/include/qemu/job.h b/include/qemu/job.h
-index 41162ed494..6662c63519 100644
+index 2b873f2576..528cd6acb9 100644
 --- a/include/qemu/job.h
 +++ b/include/qemu/job.h
-@@ -285,6 +285,18 @@ typedef enum JobCreateFlags {
+@@ -362,6 +362,18 @@ void job_unlock(void);
   */
  JobTxn *job_txn_new(void);
  
@@ -33,10 +34,10 @@ index 41162ed494..6662c63519 100644
   * Release a reference that was previously acquired with job_txn_add_job or
   * job_txn_new. If it's the last reference to the object, it will be freed.
 diff --git a/job.c b/job.c
-index 44eec9a441..a0753ff2f1 100644
+index baf54c8d60..3ac5e5cde2 100644
 --- a/job.c
 +++ b/job.c
-@@ -72,6 +72,8 @@ struct JobTxn {
+@@ -94,6 +94,8 @@ struct JobTxn {
  
      /* Reference count */
      int refcnt;
@@ -44,8 +45,8 @@ index 44eec9a441..a0753ff2f1 100644
 +    bool sequential;
  };
  
- /* Right now, this mutex is only needed to synchronize accesses to job->busy
-@@ -102,6 +104,25 @@ JobTxn *job_txn_new(void)
+ void job_lock(void)
+@@ -119,6 +121,25 @@ JobTxn *job_txn_new(void)
      return txn;
  }
  
@@ -68,20 +69,23 @@ index 44eec9a441..a0753ff2f1 100644
 +    job_start(first);
 +}
 +
- static void job_txn_ref(JobTxn *txn)
+ /* Called with job_mutex held. */
+ static void job_txn_ref_locked(JobTxn *txn)
  {
-     txn->refcnt++;
-@@ -850,6 +871,9 @@ static void job_completed_txn_success(Job *job)
+@@ -1042,6 +1063,12 @@ static void job_completed_txn_success_locked(Job *job)
       */
      QLIST_FOREACH(other_job, &txn->jobs, txn_list) {
-         if (!job_is_completed(other_job)) {
+         if (!job_is_completed_locked(other_job)) {
 +            if (txn->sequential) {
++                job_unlock();
++                /* Needs to be called without holding the job lock */
 +                job_start(other_job);
++                job_lock();
 +            }
              return;
          }
          assert(other_job->ret == 0);
-@@ -1020,6 +1044,13 @@ int job_finish_sync(Job *job, void (*finish)(Job *, Error **errp), Error **errp)
+@@ -1253,6 +1280,13 @@ int job_finish_sync_locked(Job *job,
          return -EBUSY;
      }
  
@@ -89,9 +93,9 @@ index 44eec9a441..a0753ff2f1 100644
 +     * of cancelling, these have not begun work so job_enter won't do anything,
 +     * let's ensure they are marked as ABORTING if required */
 +    if (job->status == JOB_STATUS_CREATED && job->txn->sequential) {
-+        job_update_rc(job);
++        job_update_rc_locked(job);
 +    }
 +
-     AIO_WAIT_WHILE(job->aio_context,
-                    (job_enter(job), !job_is_completed(job)));
- 
+     job_unlock();
+     AIO_WAIT_WHILE_UNLOCKED(job->aio_context,
+                             (job_enter(job), !job_is_completed(job)));

debian/patches/pve/0029-PVE-Backup-Add-dirty-bitmap-tracking-for-incremental.patch

@@ -1,452 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Stefan Reiter <s.reiter@proxmox.com>
-Date: Mon, 29 Jun 2020 11:06:03 +0200
-Subject: [PATCH] PVE-Backup: Add dirty-bitmap tracking for incremental backups
-
-Uses QEMU's existing MIRROR_SYNC_MODE_BITMAP and a dirty-bitmap on top
-of all backed-up drives. This will only execute the data-write callback
-for any changed chunks, the PBS rust code will reuse chunks from the
-previous index for everything it doesn't receive if reuse_index is true.
-
-On error or cancellation, remove all dirty bitmaps to ensure
-consistency.
-
-Add PBS/incremental specific information to query backup info QMP and
-HMP commands.
-
-Only supported for PBS backups.
-
-Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
-Signed-off-by: Dietmar Maurer <dietmar@proxmox.com>
-Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
----
- block/monitor/block-hmp-cmds.c |   1 +
- monitor/hmp-cmds.c             |  45 ++++++++++----
- proxmox-backup-client.c        |   3 +-
- proxmox-backup-client.h        |   1 +
- pve-backup.c                   | 103 ++++++++++++++++++++++++++++++---
- qapi/block-core.json           |  12 +++-
- 6 files changed, 142 insertions(+), 23 deletions(-)
-
-diff --git a/block/monitor/block-hmp-cmds.c b/block/monitor/block-hmp-cmds.c
-index 1e29681d30..3fca3ce3e9 100644
---- a/block/monitor/block-hmp-cmds.c
-+++ b/block/monitor/block-hmp-cmds.c
-@@ -1042,6 +1042,7 @@ void hmp_backup(Monitor *mon, const QDict *qdict)
-         false, NULL, // PBS fingerprint
-         false, NULL, // PBS backup-id
-         false, 0, // PBS backup-time
-+        false, false, // PBS incremental
-         true, dir ? BACKUP_FORMAT_DIR : BACKUP_FORMAT_VMA,
-         false, NULL, false, NULL, !!devlist,
-         devlist, qdict_haskey(qdict, "speed"), speed, &error);
-diff --git a/monitor/hmp-cmds.c b/monitor/hmp-cmds.c
-index 55033530fb..27d35ab91b 100644
---- a/monitor/hmp-cmds.c
-+++ b/monitor/hmp-cmds.c
-@@ -221,19 +221,42 @@ void hmp_info_backup(Monitor *mon, const QDict *qdict)
-             monitor_printf(mon, "End time: %s", ctime(&info->end_time));
-         }
- 
--        int per = (info->has_total && info->total &&
--            info->has_transferred && info->transferred) ?
--            (info->transferred * 100)/info->total : 0;
--        int zero_per = (info->has_total && info->total &&
--                        info->has_zero_bytes && info->zero_bytes) ?
--            (info->zero_bytes * 100)/info->total : 0;
-         monitor_printf(mon, "Backup file: %s\n", info->backup_file);
-         monitor_printf(mon, "Backup uuid: %s\n", info->uuid);
--        monitor_printf(mon, "Total size: %zd\n", info->total);
--        monitor_printf(mon, "Transferred bytes: %zd (%d%%)\n",
--                       info->transferred, per);
--        monitor_printf(mon, "Zero bytes: %zd (%d%%)\n",
--                       info->zero_bytes, zero_per);
-+
-+        if (!(info->has_total && info->total))  {
-+            // this should not happen normally
-+            monitor_printf(mon, "Total size: %d\n", 0);
-+        } else {
-+            bool incremental = false;
-+            size_t total_or_dirty = info->total;
-+            if (info->has_transferred) {
-+                if (info->has_dirty && info->dirty) {
-+                     if (info->dirty < info->total) {
-+                        total_or_dirty = info->dirty;
-+                        incremental = true;
-+                    }
-+                }
-+            }
-+
-+            int per = (info->transferred * 100)/total_or_dirty;
-+
-+            monitor_printf(mon, "Backup mode: %s\n", incremental ? "incremental" : "full");
-+
-+            int zero_per = (info->has_zero_bytes && info->zero_bytes) ?
-+                (info->zero_bytes * 100)/info->total : 0;
-+            monitor_printf(mon, "Total size: %zd\n", info->total);
-+            monitor_printf(mon, "Transferred bytes: %zd (%d%%)\n",
-+                           info->transferred, per);
-+            monitor_printf(mon, "Zero bytes: %zd (%d%%)\n",
-+                           info->zero_bytes, zero_per);
-+
-+            if (info->has_reused) {
-+                int reused_per = (info->reused * 100)/total_or_dirty;
-+                monitor_printf(mon, "Reused bytes: %zd (%d%%)\n",
-+                               info->reused, reused_per);
-+            }
-+        }
-     }
- 
-     qapi_free_BackupStatus(info);
-diff --git a/proxmox-backup-client.c b/proxmox-backup-client.c
-index a8f6653a81..4ce7bc0b5e 100644
---- a/proxmox-backup-client.c
-+++ b/proxmox-backup-client.c
-@@ -89,6 +89,7 @@ proxmox_backup_co_register_image(
-     ProxmoxBackupHandle *pbs,
-     const char *device_name,
-     uint64_t size,
-+    bool incremental,
-     Error **errp)
- {
-     Coroutine *co = qemu_coroutine_self();
-@@ -98,7 +99,7 @@ proxmox_backup_co_register_image(
-     int pbs_res = -1;
- 
-     proxmox_backup_register_image_async(
--        pbs, device_name, size ,proxmox_backup_schedule_wake, &waker, &pbs_res, &pbs_err);
-+        pbs, device_name, size, incremental, proxmox_backup_schedule_wake, &waker, &pbs_res, &pbs_err);
-     qemu_coroutine_yield();
-     if (pbs_res < 0) {
-         if (errp) error_setg(errp, "backup register image failed: %s", pbs_err ? pbs_err : "unknown error");
-diff --git a/proxmox-backup-client.h b/proxmox-backup-client.h
-index 1dda8b7d8f..8cbf645b2c 100644
---- a/proxmox-backup-client.h
-+++ b/proxmox-backup-client.h
-@@ -32,6 +32,7 @@ proxmox_backup_co_register_image(
-     ProxmoxBackupHandle *pbs,
-     const char *device_name,
-     uint64_t size,
-+    bool incremental,
-     Error **errp);
- 
- 
-diff --git a/pve-backup.c b/pve-backup.c
-index 66868dec14..6cdbd40529 100644
---- a/pve-backup.c
-+++ b/pve-backup.c
-@@ -28,6 +28,8 @@
-  *
-  */
- 
-+const char *PBS_BITMAP_NAME = "pbs-incremental-dirty-bitmap";
-+
- static struct PVEBackupState {
-     struct {
-         // Everithing accessed from qmp_backup_query command is protected using lock
-@@ -39,7 +41,9 @@ static struct PVEBackupState {
-         uuid_t uuid;
-         char uuid_str[37];
-         size_t total;
-+        size_t dirty;
-         size_t transferred;
-+        size_t reused;
-         size_t zero_bytes;
-     } stat;
-     int64_t speed;
-@@ -66,6 +70,7 @@ typedef struct PVEBackupDevInfo {
-     uint8_t dev_id;
-     bool completed;
-     char targetfile[PATH_MAX];
-+    BdrvDirtyBitmap *bitmap;
-     BlockDriverState *target;
- } PVEBackupDevInfo;
- 
-@@ -105,11 +110,12 @@ static bool pvebackup_error_or_canceled(void)
-     return error_or_canceled;
- }
- 
--static void pvebackup_add_transfered_bytes(size_t transferred, size_t zero_bytes)
-+static void pvebackup_add_transfered_bytes(size_t transferred, size_t zero_bytes, size_t reused)
- {
-     qemu_mutex_lock(&backup_state.stat.lock);
-     backup_state.stat.zero_bytes += zero_bytes;
-     backup_state.stat.transferred += transferred;
-+    backup_state.stat.reused += reused;
-     qemu_mutex_unlock(&backup_state.stat.lock);
- }
- 
-@@ -148,7 +154,8 @@ pvebackup_co_dump_pbs_cb(
-         pvebackup_propagate_error(local_err);
-         return pbs_res;
-     } else {
--        pvebackup_add_transfered_bytes(size, !buf ? size : 0);
-+        size_t reused = (pbs_res == 0) ? size : 0;
-+        pvebackup_add_transfered_bytes(size, !buf ? size : 0, reused);
-     }
- 
-     return size;
-@@ -208,11 +215,11 @@ pvebackup_co_dump_vma_cb(
-         } else {
-             if (remaining >= VMA_CLUSTER_SIZE) {
-                 assert(ret == VMA_CLUSTER_SIZE);
--                pvebackup_add_transfered_bytes(VMA_CLUSTER_SIZE, zero_bytes);
-+                pvebackup_add_transfered_bytes(VMA_CLUSTER_SIZE, zero_bytes, 0);
-                 remaining -= VMA_CLUSTER_SIZE;
-             } else {
-                 assert(ret == remaining);
--                pvebackup_add_transfered_bytes(remaining, zero_bytes);
-+                pvebackup_add_transfered_bytes(remaining, zero_bytes, 0);
-                 remaining = 0;
-             }
-         }
-@@ -248,6 +255,18 @@ static void coroutine_fn pvebackup_co_cleanup(void *unused)
-             if (local_err != NULL) {
-                 pvebackup_propagate_error(local_err);
-             }
-+        } else {
-+            // on error or cancel we cannot ensure synchronization of dirty
-+            // bitmaps with backup server, so remove all and do full backup next
-+            GList *l = backup_state.di_list;
-+            while (l) {
-+                PVEBackupDevInfo *di = (PVEBackupDevInfo *)l->data;
-+                l = g_list_next(l);
-+
-+                if (di->bitmap) {
-+                    bdrv_release_dirty_bitmap(di->bitmap);
-+                }
-+            }
-         }
- 
-         proxmox_backup_disconnect(backup_state.pbs);
-@@ -303,6 +322,12 @@ static void pvebackup_complete_cb(void *opaque, int ret)
-     // remove self from job queue
-     backup_state.di_list = g_list_remove(backup_state.di_list, di);
- 
-+    if (di->bitmap && ret < 0) {
-+        // on error or cancel we cannot ensure synchronization of dirty
-+        // bitmaps with backup server, so remove all and do full backup next
-+        bdrv_release_dirty_bitmap(di->bitmap);
-+    }
-+
-     g_free(di);
- 
-     qemu_mutex_unlock(&backup_state.backup_mutex);
-@@ -472,12 +497,18 @@ static bool create_backup_jobs(void) {
- 
-         assert(di->target != NULL);
- 
-+        MirrorSyncMode sync_mode = MIRROR_SYNC_MODE_FULL;
-+        BitmapSyncMode bitmap_mode = BITMAP_SYNC_MODE_NEVER;
-+        if (di->bitmap) {
-+            sync_mode = MIRROR_SYNC_MODE_BITMAP;
-+            bitmap_mode = BITMAP_SYNC_MODE_ON_SUCCESS;
-+        }
-         AioContext *aio_context = bdrv_get_aio_context(di->bs);
-         aio_context_acquire(aio_context);
- 
-         BlockJob *job = backup_job_create(
--            NULL, di->bs, di->target, backup_state.speed, MIRROR_SYNC_MODE_FULL, NULL,
--            BITMAP_SYNC_MODE_NEVER, false, NULL, &perf, BLOCKDEV_ON_ERROR_REPORT, BLOCKDEV_ON_ERROR_REPORT,
-+            NULL, di->bs, di->target, backup_state.speed, sync_mode, di->bitmap,
-+            bitmap_mode, false, NULL, &perf, BLOCKDEV_ON_ERROR_REPORT, BLOCKDEV_ON_ERROR_REPORT,
-             JOB_DEFAULT, pvebackup_complete_cb, di, NULL, &local_err);
- 
-         aio_context_release(aio_context);
-@@ -528,6 +559,8 @@ typedef struct QmpBackupTask {
-     const char *fingerprint;
-     bool has_fingerprint;
-     int64_t backup_time;
-+    bool has_use_dirty_bitmap;
-+    bool use_dirty_bitmap;
-     bool has_format;
-     BackupFormat format;
-     bool has_config_file;
-@@ -619,6 +652,7 @@ static void coroutine_fn pvebackup_co_prepare(void *opaque)
-     }
- 
-     size_t total = 0;
-+    size_t dirty = 0;
- 
-     l = di_list;
-     while (l) {
-@@ -656,6 +690,8 @@ static void coroutine_fn pvebackup_co_prepare(void *opaque)
-         int dump_cb_block_size = PROXMOX_BACKUP_DEFAULT_CHUNK_SIZE; // Hardcoded (4M)
-         firewall_name = "fw.conf";
- 
-+        bool use_dirty_bitmap = task->has_use_dirty_bitmap && task->use_dirty_bitmap;
-+
-         char *pbs_err = NULL;
-         pbs = proxmox_backup_new(
-             task->backup_file,
-@@ -675,7 +711,8 @@ static void coroutine_fn pvebackup_co_prepare(void *opaque)
-             goto err;
-         }
- 
--        if (proxmox_backup_co_connect(pbs, task->errp) < 0)
-+        int connect_result = proxmox_backup_co_connect(pbs, task->errp);
-+        if (connect_result < 0)
-             goto err;
- 
-         /* register all devices */
-@@ -686,9 +723,40 @@ static void coroutine_fn pvebackup_co_prepare(void *opaque)
- 
-             const char *devname = bdrv_get_device_name(di->bs);
- 
--            int dev_id = proxmox_backup_co_register_image(pbs, devname, di->size, task->errp);
--            if (dev_id < 0)
-+            BdrvDirtyBitmap *bitmap = bdrv_find_dirty_bitmap(di->bs, PBS_BITMAP_NAME);
-+            bool expect_only_dirty = false;
-+
-+            if (use_dirty_bitmap) {
-+                if (bitmap == NULL) {
-+                    bitmap = bdrv_create_dirty_bitmap(di->bs, dump_cb_block_size, PBS_BITMAP_NAME, task->errp);
-+                    if (!bitmap) {
-+                        goto err;
-+                    }
-+                } else {
-+                    expect_only_dirty = proxmox_backup_check_incremental(pbs, devname, di->size) != 0;
-+                }
-+
-+                if (expect_only_dirty) {
-+                    dirty += bdrv_get_dirty_count(bitmap);
-+                } else {
-+                    /* mark entire bitmap as dirty to make full backup */
-+                    bdrv_set_dirty_bitmap(bitmap, 0, di->size);
-+                    dirty += di->size;
-+                }
-+                di->bitmap = bitmap;
-+            } else {
-+                dirty += di->size;
-+
-+                /* after a full backup the old dirty bitmap is invalid anyway */
-+                if (bitmap != NULL) {
-+                    bdrv_release_dirty_bitmap(bitmap);
-+                }
-+            }
-+
-+            int dev_id = proxmox_backup_co_register_image(pbs, devname, di->size, expect_only_dirty, task->errp);
-+            if (dev_id < 0) {
-                 goto err;
-+            }
- 
-             if (!(di->target = bdrv_backup_dump_create(dump_cb_block_size, di->size, pvebackup_co_dump_pbs_cb, di, task->errp))) {
-                 goto err;
-@@ -697,6 +765,8 @@ static void coroutine_fn pvebackup_co_prepare(void *opaque)
-             di->dev_id = dev_id;
-         }
-     } else if (format == BACKUP_FORMAT_VMA) {
-+        dirty = total;
-+
-         vmaw = vma_writer_create(task->backup_file, uuid, &local_err);
-         if (!vmaw) {
-             if (local_err) {
-@@ -724,6 +794,8 @@ static void coroutine_fn pvebackup_co_prepare(void *opaque)
-             }
-         }
-     } else if (format == BACKUP_FORMAT_DIR) {
-+        dirty = total;
-+
-         if (mkdir(task->backup_file, 0640) != 0) {
-             error_setg_errno(task->errp, errno, "can't create directory '%s'\n",
-                              task->backup_file);
-@@ -796,8 +868,10 @@ static void coroutine_fn pvebackup_co_prepare(void *opaque)
-     char *uuid_str = g_strdup(backup_state.stat.uuid_str);
- 
-     backup_state.stat.total = total;
-+    backup_state.stat.dirty = dirty;
-     backup_state.stat.transferred = 0;
-     backup_state.stat.zero_bytes = 0;
-+    backup_state.stat.reused = format == BACKUP_FORMAT_PBS && dirty >= total ? 0 : total - dirty;
- 
-     qemu_mutex_unlock(&backup_state.stat.lock);
- 
-@@ -821,6 +895,10 @@ err:
-         PVEBackupDevInfo *di = (PVEBackupDevInfo *)l->data;
-         l = g_list_next(l);
- 
-+        if (di->bitmap) {
-+            bdrv_release_dirty_bitmap(di->bitmap);
-+        }
-+
-         if (di->target) {
-             bdrv_unref(di->target);
-         }
-@@ -862,6 +940,7 @@ UuidInfo *qmp_backup(
-     bool has_fingerprint, const char *fingerprint,
-     bool has_backup_id, const char *backup_id,
-     bool has_backup_time, int64_t backup_time,
-+    bool has_use_dirty_bitmap, bool use_dirty_bitmap,
-     bool has_format, BackupFormat format,
-     bool has_config_file, const char *config_file,
-     bool has_firewall_file, const char *firewall_file,
-@@ -880,6 +959,8 @@ UuidInfo *qmp_backup(
-         .backup_id = backup_id,
-         .has_backup_time = has_backup_time,
-         .backup_time = backup_time,
-+        .has_use_dirty_bitmap = has_use_dirty_bitmap,
-+        .use_dirty_bitmap = use_dirty_bitmap,
-         .has_format = has_format,
-         .format = format,
-         .has_config_file = has_config_file,
-@@ -948,10 +1029,14 @@ BackupStatus *qmp_query_backup(Error **errp)
- 
-     info->has_total = true;
-     info->total = backup_state.stat.total;
-+    info->has_dirty = true;
-+    info->dirty = backup_state.stat.dirty;
-     info->has_zero_bytes = true;
-     info->zero_bytes = backup_state.stat.zero_bytes;
-     info->has_transferred = true;
-     info->transferred = backup_state.stat.transferred;
-+    info->has_reused = true;
-+    info->reused = backup_state.stat.reused;
- 
-     qemu_mutex_unlock(&backup_state.stat.lock);
- 
-diff --git a/qapi/block-core.json b/qapi/block-core.json
-index c5d604693f..a138ad08d4 100644
---- a/qapi/block-core.json
-+++ b/qapi/block-core.json
-@@ -712,8 +712,13 @@
- #
- # @total: total amount of bytes involved in the backup process
- #
-+# @dirty: with incremental mode (PBS) this is the amount of bytes involved
-+#         in the backup process which are marked dirty.
-+#
- # @transferred: amount of bytes already backed up.
- #
-+# @reused: amount of bytes reused due to deduplication.
-+#
- # @zero-bytes: amount of 'zero' bytes detected.
- #
- # @start-time: time (epoch) when backup job started.
-@@ -726,8 +731,8 @@
- #
- ##
- { 'struct': 'BackupStatus',
--  'data': {'*status': 'str', '*errmsg': 'str', '*total': 'int',
--           '*transferred': 'int', '*zero-bytes': 'int',
-+  'data': {'*status': 'str', '*errmsg': 'str', '*total': 'int', '*dirty': 'int',
-+           '*transferred': 'int', '*zero-bytes': 'int', '*reused': 'int',
-            '*start-time': 'int', '*end-time': 'int',
-            '*backup-file': 'str', '*uuid': 'str' } }
- 
-@@ -770,6 +775,8 @@
- #
- # @backup-time: backup timestamp (Unix epoch, required for format 'pbs')
- #
-+# @use-dirty-bitmap: use dirty bitmap to detect incremental changes since last job (optional for format 'pbs')
-+#
- # Returns: the uuid of the backup job
- #
- ##
-@@ -780,6 +787,7 @@
-                                     '*fingerprint': 'str',
-                                     '*backup-id': 'str',
-                                     '*backup-time': 'int',
-+                                    '*use-dirty-bitmap': 'bool',
-                                     '*format': 'BackupFormat',
-                                     '*config-file': 'str',
-                                     '*firewall-file': 'str',

debian/patches/pve/0030-PVE-various-PBS-fixes.patch

@@ -1,218 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Dietmar Maurer <dietmar@proxmox.com>
-Date: Thu, 9 Jul 2020 12:53:08 +0200
-Subject: [PATCH] PVE: various PBS fixes
-
-pbs: fix crypt and compress parameters
-Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
-
-PVE: handle PBS write callback with big blocks correctly
-Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
-
-PVE: add zero block handling to PBS dump callback
-Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
----
- block/monitor/block-hmp-cmds.c |  4 ++-
- pve-backup.c                   | 57 +++++++++++++++++++++++++++-------
- qapi/block-core.json           |  6 ++++
- 3 files changed, 54 insertions(+), 13 deletions(-)
-
-diff --git a/block/monitor/block-hmp-cmds.c b/block/monitor/block-hmp-cmds.c
-index 3fca3ce3e9..69254396d5 100644
---- a/block/monitor/block-hmp-cmds.c
-+++ b/block/monitor/block-hmp-cmds.c
-@@ -1042,7 +1042,9 @@ void hmp_backup(Monitor *mon, const QDict *qdict)
-         false, NULL, // PBS fingerprint
-         false, NULL, // PBS backup-id
-         false, 0, // PBS backup-time
--        false, false, // PBS incremental
-+        false, false, // PBS use-dirty-bitmap
-+        false, false, // PBS compress
-+        false, false, // PBS encrypt
-         true, dir ? BACKUP_FORMAT_DIR : BACKUP_FORMAT_VMA,
-         false, NULL, false, NULL, !!devlist,
-         devlist, qdict_haskey(qdict, "speed"), speed, &error);
-diff --git a/pve-backup.c b/pve-backup.c
-index 6cdbd40529..7527885251 100644
---- a/pve-backup.c
-+++ b/pve-backup.c
-@@ -8,6 +8,7 @@
- #include "block/blockjob.h"
- #include "qapi/qapi-commands-block.h"
- #include "qapi/qmp/qerror.h"
-+#include "qemu/cutils.h"
- 
- /* PVE backup state and related function */
- 
-@@ -67,6 +68,7 @@ opts_init(pvebackup_init);
- typedef struct PVEBackupDevInfo {
-     BlockDriverState *bs;
-     size_t size;
-+    uint64_t block_size;
-     uint8_t dev_id;
-     bool completed;
-     char targetfile[PATH_MAX];
-@@ -135,10 +137,13 @@ pvebackup_co_dump_pbs_cb(
-     PVEBackupDevInfo *di = opaque;
- 
-     assert(backup_state.pbs);
-+    assert(buf);
- 
-     Error *local_err = NULL;
-     int pbs_res = -1;
- 
-+    bool is_zero_block = size == di->block_size && buffer_is_zero(buf, size);
-+
-     qemu_co_mutex_lock(&backup_state.dump_callback_mutex);
- 
-     // avoid deadlock if job is cancelled
-@@ -147,17 +152,29 @@ pvebackup_co_dump_pbs_cb(
-         return -1;
-     }
- 
--    pbs_res = proxmox_backup_co_write_data(backup_state.pbs, di->dev_id, buf, start, size, &local_err);
--    qemu_co_mutex_unlock(&backup_state.dump_callback_mutex);
-+    uint64_t transferred = 0;
-+    uint64_t reused = 0;
-+    while (transferred < size) {
-+        uint64_t left = size - transferred;
-+        uint64_t to_transfer = left < di->block_size ? left : di->block_size;
- 
--    if (pbs_res < 0) {
--        pvebackup_propagate_error(local_err);
--        return pbs_res;
--    } else {
--        size_t reused = (pbs_res == 0) ? size : 0;
--        pvebackup_add_transfered_bytes(size, !buf ? size : 0, reused);
-+        pbs_res = proxmox_backup_co_write_data(backup_state.pbs, di->dev_id,
-+            is_zero_block ? NULL : buf + transferred, start + transferred,
-+            to_transfer, &local_err);
-+        transferred += to_transfer;
-+
-+        if (pbs_res < 0) {
-+            pvebackup_propagate_error(local_err);
-+            qemu_co_mutex_unlock(&backup_state.dump_callback_mutex);
-+            return pbs_res;
-+        }
-+
-+        reused += pbs_res == 0 ? to_transfer : 0;
-     }
- 
-+    qemu_co_mutex_unlock(&backup_state.dump_callback_mutex);
-+    pvebackup_add_transfered_bytes(size, is_zero_block ? size : 0, reused);
-+
-     return size;
- }
- 
-@@ -178,6 +195,7 @@ pvebackup_co_dump_vma_cb(
-     int ret = -1;
- 
-     assert(backup_state.vmaw);
-+    assert(buf);
- 
-     uint64_t remaining = size;
- 
-@@ -204,9 +222,7 @@ pvebackup_co_dump_vma_cb(
-         qemu_co_mutex_unlock(&backup_state.dump_callback_mutex);
- 
-         ++cluster_num;
--        if (buf) {
--            buf += VMA_CLUSTER_SIZE;
--        }
-+        buf += VMA_CLUSTER_SIZE;
-         if (ret < 0) {
-             Error *local_err = NULL;
-             vma_writer_error_propagate(backup_state.vmaw, &local_err);
-@@ -569,6 +585,10 @@ typedef struct QmpBackupTask {
-     const char *firewall_file;
-     bool has_devlist;
-     const char *devlist;
-+    bool has_compress;
-+    bool compress;
-+    bool has_encrypt;
-+    bool encrypt;
-     bool has_speed;
-     int64_t speed;
-     Error **errp;
-@@ -692,6 +712,7 @@ static void coroutine_fn pvebackup_co_prepare(void *opaque)
- 
-         bool use_dirty_bitmap = task->has_use_dirty_bitmap && task->use_dirty_bitmap;
- 
-+
-         char *pbs_err = NULL;
-         pbs = proxmox_backup_new(
-             task->backup_file,
-@@ -701,8 +722,10 @@ static void coroutine_fn pvebackup_co_prepare(void *opaque)
-             task->has_password ? task->password : NULL,
-             task->has_keyfile ? task->keyfile : NULL,
-             task->has_key_password ? task->key_password : NULL,
-+            task->has_compress ? task->compress : true,
-+            task->has_encrypt ? task->encrypt : task->has_keyfile,
-             task->has_fingerprint ? task->fingerprint : NULL,
--            &pbs_err);
-+             &pbs_err);
- 
-         if (!pbs) {
-             error_set(task->errp, ERROR_CLASS_GENERIC_ERROR,
-@@ -721,6 +744,8 @@ static void coroutine_fn pvebackup_co_prepare(void *opaque)
-             PVEBackupDevInfo *di = (PVEBackupDevInfo *)l->data;
-             l = g_list_next(l);
- 
-+            di->block_size = dump_cb_block_size;
-+
-             const char *devname = bdrv_get_device_name(di->bs);
- 
-             BdrvDirtyBitmap *bitmap = bdrv_find_dirty_bitmap(di->bs, PBS_BITMAP_NAME);
-@@ -941,6 +966,8 @@ UuidInfo *qmp_backup(
-     bool has_backup_id, const char *backup_id,
-     bool has_backup_time, int64_t backup_time,
-     bool has_use_dirty_bitmap, bool use_dirty_bitmap,
-+    bool has_compress, bool compress,
-+    bool has_encrypt, bool encrypt,
-     bool has_format, BackupFormat format,
-     bool has_config_file, const char *config_file,
-     bool has_firewall_file, const char *firewall_file,
-@@ -951,6 +978,8 @@ UuidInfo *qmp_backup(
-         .backup_file = backup_file,
-         .has_password = has_password,
-         .password = password,
-+        .has_keyfile = has_keyfile,
-+        .keyfile = keyfile,
-         .has_key_password = has_key_password,
-         .key_password = key_password,
-         .has_fingerprint = has_fingerprint,
-@@ -961,6 +990,10 @@ UuidInfo *qmp_backup(
-         .backup_time = backup_time,
-         .has_use_dirty_bitmap = has_use_dirty_bitmap,
-         .use_dirty_bitmap = use_dirty_bitmap,
-+        .has_compress = has_compress,
-+        .compress = compress,
-+        .has_encrypt = has_encrypt,
-+        .encrypt = encrypt,
-         .has_format = has_format,
-         .format = format,
-         .has_config_file = has_config_file,
-diff --git a/qapi/block-core.json b/qapi/block-core.json
-index a138ad08d4..a75f1b4687 100644
---- a/qapi/block-core.json
-+++ b/qapi/block-core.json
-@@ -777,6 +777,10 @@
- #
- # @use-dirty-bitmap: use dirty bitmap to detect incremental changes since last job (optional for format 'pbs')
- #
-+# @compress: use compression (optional for format 'pbs', defaults to true)
-+#
-+# @encrypt: use encryption ((optional for format 'pbs', defaults to true if there is a keyfile)
-+#
- # Returns: the uuid of the backup job
- #
- ##
-@@ -788,6 +792,8 @@
-                                     '*backup-id': 'str',
-                                     '*backup-time': 'int',
-                                     '*use-dirty-bitmap': 'bool',
-+                                    '*compress': 'bool',
-+                                    '*encrypt': 'bool',
-                                     '*format': 'BackupFormat',
-                                     '*config-file': 'str',
-                                     '*firewall-file': 'str',

debian/patches/pve/0031-PVE-Backup-pbs-restore-new-command-to-restore-from-p.patch

@@ -5,33 +5,35 @@ Subject: [PATCH] PVE-Backup: pbs-restore - new command to restore from proxmox
  backup server
 
 Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
+[WB: add namespace support]
+Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
 ---
  meson.build   |   4 +
- pbs-restore.c | 224 ++++++++++++++++++++++++++++++++++++++++++++++++++
- 2 files changed, 228 insertions(+)
+ pbs-restore.c | 236 ++++++++++++++++++++++++++++++++++++++++++++++++++
+ 2 files changed, 240 insertions(+)
  create mode 100644 pbs-restore.c
 
 diff --git a/meson.build b/meson.build
-index c05c926cc3..69a0fe80ef 100644
+index 979c452f74..426f382178 100644
 --- a/meson.build
 +++ b/meson.build
-@@ -2749,6 +2749,10 @@ if have_tools
+@@ -4103,6 +4103,10 @@ if have_tools
    vma = executable('vma', files('vma.c', 'vma-reader.c') + genh,
-                    dependencies: [authz, block, crypto, io, qom], install: true)
+                    dependencies: [authz, block, crypto, io, qemuutil, qom], install: true)
  
 +  pbs_restore = executable('pbs-restore', files('pbs-restore.c') + genh,
-+                  dependencies: [authz, block, crypto, io, qom,
++                  dependencies: [authz, block, crypto, io, qemuutil, qom,
 +                    libproxmox_backup_qemu], install: true)
 +
    subdir('storage-daemon')
-   subdir('contrib/rdmacm-mux')
-   subdir('contrib/elf2dmp')
+ 
+   foreach exe: [ 'qemu-img', 'qemu-io', 'qemu-nbd', 'qemu-storage-daemon']
 diff --git a/pbs-restore.c b/pbs-restore.c
 new file mode 100644
-index 0000000000..4d3f925a1b
+index 0000000000..f03d9bab8d
 --- /dev/null
 +++ b/pbs-restore.c
-@@ -0,0 +1,224 @@
+@@ -0,0 +1,236 @@
 +/*
 + * Qemu image restore helper for Proxmox Backup
 + *
@@ -50,7 +52,6 @@ index 0000000000..4d3f925a1b
 +#include <getopt.h>
 +#include <string.h>
 +
-+#include "qemu-common.h"
 +#include "qemu/module.h"
 +#include "qemu/error-report.h"
 +#include "qemu/main-loop.h"
@@ -64,7 +65,7 @@ index 0000000000..4d3f925a1b
 +static void help(void)
 +{
 +    const char *help_msg =
-+        "usage: pbs-restore [--repository <repo>] snapshot archive-name target [command options]\n"
++        "usage: pbs-restore [--repository <repo>] [--ns namespace] snapshot archive-name target [command options]\n"
 +        ;
 +
 +    printf("%s", help_msg);
@@ -96,7 +97,7 @@ index 0000000000..4d3f925a1b
 +        }
 +        res = blk_pwrite_zeroes(callback_data->target, offset, data_len, 0);
 +    } else {
-+        res = blk_pwrite(callback_data->target, offset, data, data_len, 0);
++        res = blk_pwrite(callback_data->target, offset, data_len, data, 0);
 +    }
 +
 +    if (res < 0) {
@@ -112,6 +113,7 @@ index 0000000000..4d3f925a1b
 +    Error *main_loop_err = NULL;
 +    const char *format = "raw";
 +    const char *repository = NULL;
++    const char *backup_ns = NULL;
 +    const char *keyfile = NULL;
 +    int verbose = false;
 +    bool skip_zero = false;
@@ -125,6 +127,7 @@ index 0000000000..4d3f925a1b
 +            {"verbose", no_argument, 0, 'v'},
 +            {"format", required_argument, 0, 'f'},
 +            {"repository", required_argument, 0, 'r'},
++            {"ns", required_argument, 0, 'n'},
 +            {"keyfile", required_argument, 0, 'k'},
 +            {0, 0, 0, 0}
 +        };
@@ -145,6 +148,9 @@ index 0000000000..4d3f925a1b
 +            case 'r':
 +                repository = g_strdup(argv[optind - 1]);
 +                break;
++            case 'n':
++                backup_ns = g_strdup(argv[optind - 1]);
++                break;
 +            case 'k':
 +                keyfile = g_strdup(argv[optind - 1]);
 +                break;
@@ -195,8 +201,16 @@ index 0000000000..4d3f925a1b
 +        fprintf(stderr, "connecting to repository '%s'\n", repository);
 +    }
 +    char *pbs_error = NULL;
-+    ProxmoxRestoreHandle *conn = proxmox_restore_new(
-+        repository, snapshot, password, keyfile, key_password, fingerprint, &pbs_error);
++    ProxmoxRestoreHandle *conn = proxmox_restore_new_ns(
++        repository,
++        snapshot,
++        backup_ns,
++        password,
++        keyfile,
++        key_password,
++        fingerprint,
++        &pbs_error
++    );
 +    if (conn == NULL) {
 +        fprintf(stderr, "restore failed: %s\n", pbs_error);
 +        return -1;

debian/patches/pve/0032-PVE-Add-PBS-block-driver-to-map-backup-archives-into.patch

@@ -6,35 +6,41 @@ Subject: [PATCH] PVE: Add PBS block driver to map backup archives into VMs
 Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
 [error cleanups, file_open implementation]
 Signed-off-by: Dietmar Maurer <dietmar@proxmox.com>
+Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
+[WB: add namespace support]
+Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
+[FE: adapt to changed function signatures
+     make pbs_co_preadv return values consistent with QEMU
+     getlength is now a coroutine function]
+Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
 ---
- block/meson.build    |   3 +
- block/pbs.c          | 271 +++++++++++++++++++++++++++++++++++++++++++
- configure            |   9 ++
- meson.build          |   1 +
- qapi/block-core.json |  13 +++
- 5 files changed, 297 insertions(+)
+ block/meson.build    |   2 +
+ block/pbs.c          | 306 +++++++++++++++++++++++++++++++++++++++++++
+ meson.build          |   2 +-
+ qapi/block-core.json |  29 ++++
+ qapi/pragma.json     |   1 +
+ 5 files changed, 339 insertions(+), 1 deletion(-)
  create mode 100644 block/pbs.c
 
 diff --git a/block/meson.build b/block/meson.build
-index 9e433daf2e..e3ed5ac97c 100644
+index 2367e1ac1b..e178047ec9 100644
 --- a/block/meson.build
 +++ b/block/meson.build
-@@ -51,6 +51,9 @@ block_ss.add(files(
+@@ -49,6 +49,8 @@ block_ss.add(files(
    '../pve-backup.c',
  ), libproxmox_backup_qemu)
  
-+block_ss.add(when: 'CONFIG_PBS_BDRV', if_true: files('pbs.c'))
-+block_ss.add(when: 'CONFIG_PBS_BDRV', if_true: libproxmox_backup_qemu)
++block_ss.add(files('pbs.c'), libproxmox_backup_qemu)
 +
  
- softmmu_ss.add(when: 'CONFIG_TCG', if_true: files('blkreplay.c'))
- 
+ system_ss.add(when: 'CONFIG_TCG', if_true: files('blkreplay.c'))
+ system_ss.add(files('block-ram-registrar.c'))
 diff --git a/block/pbs.c b/block/pbs.c
 new file mode 100644
-index 0000000000..78dad0dcc4
+index 0000000000..2d5e28ce8f
 --- /dev/null
 +++ b/block/pbs.c
-@@ -0,0 +1,271 @@
+@@ -0,0 +1,306 @@
 +/*
 + * Proxmox Backup Server read-only block driver
 + */
@@ -47,10 +53,12 @@ index 0000000000..78dad0dcc4
 +#include "qemu/option.h"
 +#include "qemu/cutils.h"
 +#include "block/block_int.h"
++#include "block/block-io.h"
 +
 +#include <proxmox-backup-qemu.h>
 +
 +#define PBS_OPT_REPOSITORY "repository"
++#define PBS_OPT_NAMESPACE "namespace"
 +#define PBS_OPT_SNAPSHOT "snapshot"
 +#define PBS_OPT_ARCHIVE "archive"
 +#define PBS_OPT_KEYFILE "keyfile"
@@ -60,10 +68,11 @@ index 0000000000..78dad0dcc4
 +
 +typedef struct {
 +    ProxmoxRestoreHandle *conn;
-+    char aid;
++    uint8_t aid;
 +    int64_t length;
 +
 +    char *repository;
++    char *namespace;
 +    char *snapshot;
 +    char *archive;
 +} BDRVPBSState;
@@ -78,6 +87,11 @@ index 0000000000..78dad0dcc4
 +            .help = "The server address and repository to connect to.",
 +        },
 +        {
++            .name = PBS_OPT_NAMESPACE,
++            .type = QEMU_OPT_STRING,
++            .help = "Optional: The snapshot's namespace.",
++        },
++        {
 +            .name = PBS_OPT_SNAPSHOT,
 +            .type = QEMU_OPT_STRING,
 +            .help = "The snapshot to read.",
@@ -113,7 +127,7 @@ index 0000000000..78dad0dcc4
 +
 +
 +// filename format:
-+// pbs:repository=<repo>,snapshot=<snap>,password=<pw>,key_password=<kpw>,fingerprint=<fp>,archive=<archive>
++// pbs:repository=<repo>,namespace=<ns>,snapshot=<snap>,password=<pw>,key_password=<kpw>,fingerprint=<fp>,archive=<archive>
 +static void pbs_parse_filename(const char *filename, QDict *options,
 +                                     Error **errp)
 +{
@@ -149,6 +163,7 @@ index 0000000000..78dad0dcc4
 +    s->archive = g_strdup(qemu_opt_get(opts, PBS_OPT_ARCHIVE));
 +    const char *keyfile = qemu_opt_get(opts, PBS_OPT_KEYFILE);
 +    const char *password = qemu_opt_get(opts, PBS_OPT_PASSWORD);
++    const char *namespace = qemu_opt_get(opts, PBS_OPT_NAMESPACE);
 +    const char *fingerprint = qemu_opt_get(opts, PBS_OPT_FINGERPRINT);
 +    const char *key_password = qemu_opt_get(opts, PBS_OPT_ENCRYPTION_PASSWORD);
 +
@@ -161,9 +176,12 @@ index 0000000000..78dad0dcc4
 +    if (!key_password) {
 +        key_password = getenv("PBS_ENCRYPTION_PASSWORD");
 +    }
++    if (namespace) {
++        s->namespace = g_strdup(namespace);
++    }
 +
 +    /* connect to PBS server in read mode */
-+    s->conn = proxmox_restore_new(s->repository, s->snapshot, password,
++    s->conn = proxmox_restore_new_ns(s->repository, s->snapshot, s->namespace, password,
 +        keyfile, key_password, fingerprint, &pbs_error);
 +
 +    /* invalidates qemu_opt_get char pointers from above */
@@ -183,12 +201,18 @@ index 0000000000..78dad0dcc4
 +    }
 +
 +    /* acquire handle and length */
-+    s->aid = proxmox_restore_open_image(s->conn, s->archive, &pbs_error);
-+    if (s->aid < 0) {
++    ret = proxmox_restore_open_image(s->conn, s->archive, &pbs_error);
++    if (ret < 0) {
 +        if (pbs_error && errp) error_setg(errp, "PBS open_image failed: %s", pbs_error);
 +        if (pbs_error) proxmox_backup_free_error(pbs_error);
 +        return -ENODEV;
 +    }
++    if (ret > UINT8_MAX) {
++        error_setg(errp, "PBS open_image returned an ID larger than %u", UINT8_MAX);
++        return -ENODEV;
++    }
++    s->aid = ret;
++
 +    s->length = proxmox_restore_get_image_length(s->conn, s->aid, &pbs_error);
 +    if (s->length < 0) {
 +        if (pbs_error && errp) error_setg(errp, "PBS get_image_length failed: %s", pbs_error);
@@ -199,21 +223,17 @@ index 0000000000..78dad0dcc4
 +    return 0;
 +}
 +
-+static int pbs_file_open(BlockDriverState *bs, QDict *options, int flags,
-+                         Error **errp)
-+{
-+    return pbs_open(bs, options, flags, errp);
-+}
-+
 +static void pbs_close(BlockDriverState *bs) {
 +    BDRVPBSState *s = bs->opaque;
 +    g_free(s->repository);
++    g_free(s->namespace);
 +    g_free(s->snapshot);
 +    g_free(s->archive);
 +    proxmox_restore_disconnect(s->conn);
 +}
 +
-+static int64_t pbs_getlength(BlockDriverState *bs)
++static coroutine_fn int64_t GRAPH_RDLOCK
++pbs_co_getlength(BlockDriverState *bs)
 +{
 +    BDRVPBSState *s = bs->opaque;
 +    return s->length;
@@ -230,21 +250,35 @@ index 0000000000..78dad0dcc4
 +    aio_co_schedule(rcb->ctx, rcb->co);
 +}
 +
-+static coroutine_fn int pbs_co_preadv(BlockDriverState *bs,
-+                                      uint64_t offset, uint64_t bytes,
-+                                      QEMUIOVector *qiov, int flags)
++static coroutine_fn int GRAPH_RDLOCK
++pbs_co_preadv(BlockDriverState *bs, int64_t offset, int64_t bytes,
++              QEMUIOVector *qiov, BdrvRequestFlags flags)
 +{
 +    BDRVPBSState *s = bs->opaque;
 +    int ret;
 +    char *pbs_error = NULL;
-+    uint8_t *buf = malloc(bytes);
++    uint8_t *buf;
++    bool inline_buf = true;
++
++    /* for single-buffer IO vectors we can fast-path the write directly to it */
++    if (qiov->niov == 1 && qiov->iov->iov_len >= bytes) {
++        buf = qiov->iov->iov_base;
++    } else {
++        inline_buf = false;
++        buf = g_malloc(bytes);
++    }
++
++    if (offset < 0 || bytes < 0) {
++        fprintf(stderr, "unexpected negative 'offset' or 'bytes' value!\n");
++        return -EIO;
++    }
 +
 +    ReadCallbackData rcb = {
 +        .co = qemu_coroutine_self(),
 +        .ctx = bdrv_get_aio_context(bs),
 +    };
 +
-+    proxmox_restore_read_image_at_async(s->conn, s->aid, buf, offset, bytes,
++    proxmox_restore_read_image_at_async(s->conn, s->aid, buf, (uint64_t)offset, (uint64_t)bytes,
 +                                        read_callback, (void *) &rcb, &ret, &pbs_error);
 +
 +    qemu_coroutine_yield();
@@ -255,26 +289,34 @@ index 0000000000..78dad0dcc4
 +        return -EIO;
 +    }
 +
-+    qemu_iovec_from_buf(qiov, 0, buf, bytes);
-+    free(buf);
++    if (!inline_buf) {
++        qemu_iovec_from_buf(qiov, 0, buf, bytes);
++        g_free(buf);
++    }
 +
-+    return ret;
++    return 0;
 +}
 +
-+static coroutine_fn int pbs_co_pwritev(BlockDriverState *bs,
-+                                       uint64_t offset, uint64_t bytes,
-+                                       QEMUIOVector *qiov, int flags)
++static coroutine_fn int GRAPH_RDLOCK
++pbs_co_pwritev(BlockDriverState *bs, int64_t offset, int64_t bytes,
++               QEMUIOVector *qiov, BdrvRequestFlags flags)
 +{
 +    fprintf(stderr, "pbs-bdrv: cannot write to backup file, make sure "
 +           "any attached disk devices are set to read-only!\n");
 +    return -EPERM;
 +}
 +
-+static void pbs_refresh_filename(BlockDriverState *bs)
++static void GRAPH_RDLOCK
++pbs_refresh_filename(BlockDriverState *bs)
 +{
 +    BDRVPBSState *s = bs->opaque;
-+    snprintf(bs->exact_filename, sizeof(bs->exact_filename), "%s/%s(%s)",
-+             s->repository, s->snapshot, s->archive);
++    if (s->namespace) {
++        snprintf(bs->exact_filename, sizeof(bs->exact_filename), "%s/%s:%s(%s)",
++                 s->repository, s->namespace, s->snapshot, s->archive);
++    } else {
++        snprintf(bs->exact_filename, sizeof(bs->exact_filename), "%s/%s(%s)",
++                 s->repository, s->snapshot, s->archive);
++    }
 +}
 +
 +static const char *const pbs_strong_runtime_opts[] = {
@@ -288,10 +330,9 @@ index 0000000000..78dad0dcc4
 +
 +    .bdrv_parse_filename    = pbs_parse_filename,
 +
-+    .bdrv_file_open         = pbs_file_open,
 +    .bdrv_open              = pbs_open,
 +    .bdrv_close             = pbs_close,
-+    .bdrv_getlength         = pbs_getlength,
++    .bdrv_co_getlength      = pbs_co_getlength,
 +
 +    .bdrv_co_preadv         = pbs_co_preadv,
 +    .bdrv_co_pwritev        = pbs_co_pwritev,
@@ -306,72 +347,32 @@ index 0000000000..78dad0dcc4
 +}
 +
 +block_init(bdrv_pbs_init);
-diff --git a/configure b/configure
-index 9a79a004d7..7cb181b61a 100755
---- a/configure
-+++ b/configure
-@@ -428,6 +428,7 @@ vdi=${default_feature:-yes}
- vvfat=${default_feature:-yes}
- qed=${default_feature:-yes}
- parallels=${default_feature:-yes}
-+pbs_bdrv="yes"
- libxml2="auto"
- debug_mutex="no"
- libpmem="auto"
-@@ -1486,6 +1487,10 @@ for opt do
-   ;;
-   --enable-parallels) parallels="yes"
-   ;;
-+  --disable-pbs-bdrv) pbs_bdrv="no"
-+  ;;
-+  --enable-pbs-bdrv) pbs_bdrv="yes"
-+  ;;
-   --disable-vhost-user) vhost_user="no"
-   ;;
-   --enable-vhost-user) vhost_user="yes"
-@@ -1956,6 +1961,7 @@ disabled with --disable-FEATURE, default is enabled if available
-   vvfat           vvfat image format support
-   qed             qed image format support
-   parallels       parallels image format support
-+  pbs-bdrv        Proxmox backup server read-only block driver support
-   crypto-afalg    Linux AF_ALG crypto backend driver
-   capstone        capstone disassembler support
-   debug-mutex     mutex debugging support
-@@ -4622,6 +4628,9 @@ fi
- if test "$linux_aio" = "yes" ; then
-   echo "CONFIG_LINUX_AIO=y" >> $config_host_mak
- fi
-+if test "$pbs_bdrv" = "yes" ; then
-+  echo "CONFIG_PBS_BDRV=y" >> $config_host_mak
-+fi
- if test "$vhost_scsi" = "yes" ; then
-   echo "CONFIG_VHOST_SCSI=y" >> $config_host_mak
- fi
 diff --git a/meson.build b/meson.build
-index 69a0fe80ef..3faec72a80 100644
+index 426f382178..7e6130cfdf 100644
 --- a/meson.build
 +++ b/meson.build
-@@ -3111,6 +3111,7 @@ summary_info += {'lzfse support':     liblzfse.found()}
- summary_info += {'zstd support':      zstd.found()}
- summary_info += {'NUMA host support': config_host.has_key('CONFIG_NUMA')}
- summary_info += {'libxml2':           libxml2.found()}
+@@ -4559,7 +4559,7 @@ summary_info += {'zstd support':      zstd}
+ summary_info += {'Query Processing Library support': qpl}
+ summary_info += {'UADK Library support': uadk}
+ summary_info += {'NUMA host support': numa}
+-summary_info += {'capstone':          capstone}
 +summary_info += {'PBS bdrv support':  config_host.has_key('CONFIG_PBS_BDRV')}
- summary_info += {'capstone':          capstone_opt == 'disabled' ? false : capstone_opt}
- summary_info += {'libpmem support':   libpmem.found()}
- summary_info += {'libdaxctl support': libdaxctl.found()}
+ summary_info += {'libpmem support':   libpmem}
+ summary_info += {'libdaxctl support': libdaxctl}
+ summary_info += {'libudev':           libudev}
 diff --git a/qapi/block-core.json b/qapi/block-core.json
-index a75f1b4687..e4d0c923a4 100644
+index ac83c3495d..fe0eefcea6 100644
 --- a/qapi/block-core.json
 +++ b/qapi/block-core.json
-@@ -2982,6 +2982,7 @@
-             'luks', 'nbd', 'nfs', 'null-aio', 'null-co', 'nvme', 'parallels',
-             'preallocate', 'qcow', 'qcow2', 'qed', 'quorum', 'raw', 'rbd',
-             { 'name': 'replication', 'if': 'defined(CONFIG_REPLICATION)' },
+@@ -3457,6 +3457,7 @@
+             'parallels', 'preallocate', 'qcow', 'qcow2', 'qed', 'quorum',
+             'raw', 'rbd',
+             { 'name': 'replication', 'if': 'CONFIG_REPLICATION' },
 +            'pbs',
-             'ssh', 'throttle', 'vdi', 'vhdx', 'vmdk', 'vpc', 'vvfat' ] }
- 
- ##
-@@ -3045,6 +3046,17 @@
+             'ssh', 'throttle', 'vdi', 'vhdx',
+             { 'name': 'virtio-blk-vfio-pci', 'if': 'CONFIG_BLKIO' },
+             { 'name': 'virtio-blk-vhost-user', 'if': 'CONFIG_BLKIO' },
+@@ -3543,6 +3544,33 @@
  { 'struct': 'BlockdevOptionsNull',
    'data': { '*size': 'int', '*latency-ns': 'uint64', '*read-zeroes': 'bool' } }
  
@@ -380,20 +381,48 @@ index a75f1b4687..e4d0c923a4 100644
 +#
 +# Driver specific block device options for the PBS backend.
 +#
++# @repository: Proxmox Backup Server repository.
++#
++# @snapshot: backup snapshots ID.
++#
++# @archive: archive name.
++#
++# @keyfile: keyfile to use for encryption.
++#
++# @password: password to use for connection.
++#
++# @fingerprint: backup server fingerprint.
++#
++# @key_password: password to unlock key.
++#
++# @namespace: namespace where backup snapshot lives.
++#
 +##
 +{ 'struct': 'BlockdevOptionsPbs',
 +  'data': { 'repository': 'str', 'snapshot': 'str', 'archive': 'str',
 +            '*keyfile': 'str', '*password': 'str', '*fingerprint': 'str',
-+            '*key_password': 'str' } }
++            '*key_password': 'str', '*namespace': 'str' } }
 +
  ##
  # @BlockdevOptionsNVMe:
  #
-@@ -4263,6 +4275,7 @@
+@@ -4978,6 +5006,7 @@
        'nfs':        'BlockdevOptionsNfs',
        'null-aio':   'BlockdevOptionsNull',
        'null-co':    'BlockdevOptionsNull',
 +      'pbs':        'BlockdevOptionsPbs',
        'nvme':       'BlockdevOptionsNVMe',
-       'parallels':  'BlockdevOptionsGenericFormat',
-       'preallocate':'BlockdevOptionsPreallocate',
+       'nvme-io_uring': { 'type': 'BlockdevOptionsNvmeIoUring',
+                          'if': 'CONFIG_BLKIO' },
+diff --git a/qapi/pragma.json b/qapi/pragma.json
+index be8fa304c5..7ff46bd128 100644
+--- a/qapi/pragma.json
++++ b/qapi/pragma.json
+@@ -100,6 +100,7 @@
+         'BlockInfo',                # query-block
+         'BlockdevAioOptions',       # blockdev-add, -blockdev
+         'BlockdevDriver',           # blockdev-add, query-blockstats, ...
++        'BlockdevOptionsPbs',       # for PBS backwards compat
+         'BlockdevVmdkAdapterType',  # blockdev-create (to match VMDK spec)
+         'BlockdevVmdkSubformat',    # blockdev-create (to match VMDK spec)
+         'ColoCompareProperties',    # object_add, -object

debian/patches/pve/0032-PVE-add-query_proxmox_support-QMP-command.patch

@@ -1,74 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Stefan Reiter <s.reiter@proxmox.com>
-Date: Wed, 8 Jul 2020 11:57:53 +0200
-Subject: [PATCH] PVE: add query_proxmox_support QMP command
-
-Generic interface for future use, currently used for PBS dirty-bitmap
-backup support.
-
-Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
-Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
-[PVE: query-proxmox-support: include library version]
-Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
----
- pve-backup.c         |  9 +++++++++
- qapi/block-core.json | 29 +++++++++++++++++++++++++++++
- 2 files changed, 38 insertions(+)
-
-diff --git a/pve-backup.c b/pve-backup.c
-index 7527885251..8cba8e97d3 100644
---- a/pve-backup.c
-+++ b/pve-backup.c
-@@ -1075,3 +1075,12 @@ BackupStatus *qmp_query_backup(Error **errp)
- 
-     return info;
- }
-+
-+ProxmoxSupportStatus *qmp_query_proxmox_support(Error **errp)
-+{
-+    ProxmoxSupportStatus *ret = g_malloc0(sizeof(*ret));
-+    ret->pbs_library_version = g_strdup(proxmox_backup_qemu_version());
-+    ret->pbs_dirty_bitmap = true;
-+    ret->pbs_dirty_bitmap_savevm = true;
-+    return ret;
-+}
-diff --git a/qapi/block-core.json b/qapi/block-core.json
-index e4d0c923a4..3eebe7ff71 100644
---- a/qapi/block-core.json
-+++ b/qapi/block-core.json
-@@ -822,6 +822,35 @@
- ##
- { 'command': 'backup-cancel' }
- 
-+##
-+# @ProxmoxSupportStatus:
-+#
-+# Contains info about supported features added by Proxmox.
-+#
-+# @pbs-dirty-bitmap: True if dirty-bitmap-incremental backups to PBS are
-+#                    supported.
-+#
-+# @pbs-dirty-bitmap-savevm: True if 'dirty-bitmaps' migration capability can
-+#                           safely be set for savevm-async.
-+#
-+# @pbs-library-version: Running version of libproxmox-backup-qemu0 library.
-+#
-+##
-+{ 'struct': 'ProxmoxSupportStatus',
-+  'data': { 'pbs-dirty-bitmap': 'bool',
-+            'pbs-dirty-bitmap-savevm': 'bool',
-+            'pbs-library-version': 'str' } }
-+
-+##
-+# @query-proxmox-support:
-+#
-+# Returns information about supported features added by Proxmox.
-+#
-+# Returns: @ProxmoxSupportStatus
-+#
-+##
-+{ 'command': 'query-proxmox-support', 'returns': 'ProxmoxSupportStatus' }
-+
- ##
- # @BlockDeviceTimedStats:
- #

debian/patches/pve/0033-PVE-add-query-pbs-bitmap-info-QMP-call.patch

@@ -1,440 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Stefan Reiter <s.reiter@proxmox.com>
-Date: Wed, 19 Aug 2020 17:02:00 +0200
-Subject: [PATCH] PVE: add query-pbs-bitmap-info QMP call
-
-Returns advanced information about dirty bitmaps used (or not used) for
-the latest PBS backup.
-
-Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
----
- monitor/hmp-cmds.c   |  28 ++++++-----
- pve-backup.c         | 117 ++++++++++++++++++++++++++++++++-----------
- qapi/block-core.json |  56 +++++++++++++++++++++
- 3 files changed, 159 insertions(+), 42 deletions(-)
-
-diff --git a/monitor/hmp-cmds.c b/monitor/hmp-cmds.c
-index 27d35ab91b..4fe2bbb26d 100644
---- a/monitor/hmp-cmds.c
-+++ b/monitor/hmp-cmds.c
-@@ -198,6 +198,7 @@ void hmp_info_mice(Monitor *mon, const QDict *qdict)
- void hmp_info_backup(Monitor *mon, const QDict *qdict)
- {
-     BackupStatus *info;
-+    PBSBitmapInfoList *bitmap_info;
- 
-     info = qmp_query_backup(NULL);
- 
-@@ -228,26 +229,29 @@ void hmp_info_backup(Monitor *mon, const QDict *qdict)
-             // this should not happen normally
-             monitor_printf(mon, "Total size: %d\n", 0);
-         } else {
--            bool incremental = false;
-             size_t total_or_dirty = info->total;
--            if (info->has_transferred) {
--                if (info->has_dirty && info->dirty) {
--                     if (info->dirty < info->total) {
--                        total_or_dirty = info->dirty;
--                        incremental = true;
--                    }
--                }
-+            bitmap_info = qmp_query_pbs_bitmap_info(NULL);
-+
-+            while (bitmap_info) {
-+                monitor_printf(mon, "Drive %s:\n",
-+                        bitmap_info->value->drive);
-+                monitor_printf(mon, "  bitmap action: %s\n",
-+                        PBSBitmapAction_str(bitmap_info->value->action));
-+                monitor_printf(mon, "  size: %zd\n",
-+                        bitmap_info->value->size);
-+                monitor_printf(mon, "  dirty: %zd\n",
-+                        bitmap_info->value->dirty);
-+                bitmap_info = bitmap_info->next;
-             }
- 
--            int per = (info->transferred * 100)/total_or_dirty;
--
--            monitor_printf(mon, "Backup mode: %s\n", incremental ? "incremental" : "full");
-+            qapi_free_PBSBitmapInfoList(bitmap_info);
- 
-             int zero_per = (info->has_zero_bytes && info->zero_bytes) ?
-                 (info->zero_bytes * 100)/info->total : 0;
-             monitor_printf(mon, "Total size: %zd\n", info->total);
-+            int trans_per = (info->transferred * 100)/total_or_dirty;
-             monitor_printf(mon, "Transferred bytes: %zd (%d%%)\n",
--                           info->transferred, per);
-+                           info->transferred, trans_per);
-             monitor_printf(mon, "Zero bytes: %zd (%d%%)\n",
-                            info->zero_bytes, zero_per);
- 
-diff --git a/pve-backup.c b/pve-backup.c
-index 8cba8e97d3..22420db26a 100644
---- a/pve-backup.c
-+++ b/pve-backup.c
-@@ -46,6 +46,7 @@ static struct PVEBackupState {
-         size_t transferred;
-         size_t reused;
-         size_t zero_bytes;
-+        GList *bitmap_list;
-     } stat;
-     int64_t speed;
-     VmaWriter *vmaw;
-@@ -672,7 +673,6 @@ static void coroutine_fn pvebackup_co_prepare(void *opaque)
-     }
- 
-     size_t total = 0;
--    size_t dirty = 0;
- 
-     l = di_list;
-     while (l) {
-@@ -693,18 +693,33 @@ static void coroutine_fn pvebackup_co_prepare(void *opaque)
- 
-     uuid_generate(uuid);
- 
-+    qemu_mutex_lock(&backup_state.stat.lock);
-+    backup_state.stat.reused = 0;
-+
-+    /* clear previous backup's bitmap_list */
-+    if (backup_state.stat.bitmap_list) {
-+        GList *bl = backup_state.stat.bitmap_list;
-+        while (bl) {
-+            g_free(((PBSBitmapInfo *)bl->data)->drive);
-+            g_free(bl->data);
-+            bl = g_list_next(bl);
-+        }
-+        g_list_free(backup_state.stat.bitmap_list);
-+        backup_state.stat.bitmap_list = NULL;
-+    }
-+
-     if (format == BACKUP_FORMAT_PBS) {
-         if (!task->has_password) {
-             error_set(task->errp, ERROR_CLASS_GENERIC_ERROR, "missing parameter 'password'");
--            goto err;
-+            goto err_mutex;
-         }
-         if (!task->has_backup_id) {
-             error_set(task->errp, ERROR_CLASS_GENERIC_ERROR, "missing parameter 'backup-id'");
--            goto err;
-+            goto err_mutex;
-         }
-         if (!task->has_backup_time) {
-             error_set(task->errp, ERROR_CLASS_GENERIC_ERROR, "missing parameter 'backup-time'");
--            goto err;
-+            goto err_mutex;
-         }
- 
-         int dump_cb_block_size = PROXMOX_BACKUP_DEFAULT_CHUNK_SIZE; // Hardcoded (4M)
-@@ -731,12 +746,12 @@ static void coroutine_fn pvebackup_co_prepare(void *opaque)
-             error_set(task->errp, ERROR_CLASS_GENERIC_ERROR,
-                       "proxmox_backup_new failed: %s", pbs_err);
-             proxmox_backup_free_error(pbs_err);
--            goto err;
-+            goto err_mutex;
-         }
- 
-         int connect_result = proxmox_backup_co_connect(pbs, task->errp);
-         if (connect_result < 0)
--            goto err;
-+            goto err_mutex;
- 
-         /* register all devices */
-         l = di_list;
-@@ -747,6 +762,8 @@ static void coroutine_fn pvebackup_co_prepare(void *opaque)
-             di->block_size = dump_cb_block_size;
- 
-             const char *devname = bdrv_get_device_name(di->bs);
-+            PBSBitmapAction action = PBS_BITMAP_ACTION_NOT_USED;
-+            size_t dirty = di->size;
- 
-             BdrvDirtyBitmap *bitmap = bdrv_find_dirty_bitmap(di->bs, PBS_BITMAP_NAME);
-             bool expect_only_dirty = false;
-@@ -755,49 +772,59 @@ static void coroutine_fn pvebackup_co_prepare(void *opaque)
-                 if (bitmap == NULL) {
-                     bitmap = bdrv_create_dirty_bitmap(di->bs, dump_cb_block_size, PBS_BITMAP_NAME, task->errp);
-                     if (!bitmap) {
--                        goto err;
-+                        goto err_mutex;
-                     }
-+                    action = PBS_BITMAP_ACTION_NEW;
-                 } else {
-                     expect_only_dirty = proxmox_backup_check_incremental(pbs, devname, di->size) != 0;
-                 }
- 
-                 if (expect_only_dirty) {
--                    dirty += bdrv_get_dirty_count(bitmap);
-+                    /* track clean chunks as reused */
-+                    dirty = MIN(bdrv_get_dirty_count(bitmap), di->size);
-+                    backup_state.stat.reused += di->size - dirty;
-+                    action = PBS_BITMAP_ACTION_USED;
-                 } else {
-                     /* mark entire bitmap as dirty to make full backup */
-                     bdrv_set_dirty_bitmap(bitmap, 0, di->size);
--                    dirty += di->size;
-+                    if (action != PBS_BITMAP_ACTION_NEW) {
-+                        action = PBS_BITMAP_ACTION_INVALID;
-+                    }
-                 }
-                 di->bitmap = bitmap;
-             } else {
--                dirty += di->size;
--
-                 /* after a full backup the old dirty bitmap is invalid anyway */
-                 if (bitmap != NULL) {
-                     bdrv_release_dirty_bitmap(bitmap);
-+                    action = PBS_BITMAP_ACTION_NOT_USED_REMOVED;
-                 }
-             }
- 
-             int dev_id = proxmox_backup_co_register_image(pbs, devname, di->size, expect_only_dirty, task->errp);
-             if (dev_id < 0) {
--                goto err;
-+                goto err_mutex;
-             }
- 
-             if (!(di->target = bdrv_backup_dump_create(dump_cb_block_size, di->size, pvebackup_co_dump_pbs_cb, di, task->errp))) {
--                goto err;
-+                goto err_mutex;
-             }
- 
-             di->dev_id = dev_id;
-+
-+            PBSBitmapInfo *info = g_malloc(sizeof(*info));
-+            info->drive = g_strdup(devname);
-+            info->action = action;
-+            info->size = di->size;
-+            info->dirty = dirty;
-+            backup_state.stat.bitmap_list = g_list_append(backup_state.stat.bitmap_list, info);
-         }
-     } else if (format == BACKUP_FORMAT_VMA) {
--        dirty = total;
--
-         vmaw = vma_writer_create(task->backup_file, uuid, &local_err);
-         if (!vmaw) {
-             if (local_err) {
-                 error_propagate(task->errp, local_err);
-             }
--            goto err;
-+            goto err_mutex;
-         }
- 
-         /* register all devices for vma writer */
-@@ -807,7 +834,7 @@ static void coroutine_fn pvebackup_co_prepare(void *opaque)
-             l = g_list_next(l);
- 
-             if (!(di->target = bdrv_backup_dump_create(VMA_CLUSTER_SIZE, di->size, pvebackup_co_dump_vma_cb, di, task->errp))) {
--                goto err;
-+                goto err_mutex;
-             }
- 
-             const char *devname = bdrv_get_device_name(di->bs);
-@@ -815,16 +842,14 @@ static void coroutine_fn pvebackup_co_prepare(void *opaque)
-             if (di->dev_id <= 0) {
-                 error_set(task->errp, ERROR_CLASS_GENERIC_ERROR,
-                           "register_stream failed");
--                goto err;
-+                goto err_mutex;
-             }
-         }
-     } else if (format == BACKUP_FORMAT_DIR) {
--        dirty = total;
--
-         if (mkdir(task->backup_file, 0640) != 0) {
-             error_setg_errno(task->errp, errno, "can't create directory '%s'\n",
-                              task->backup_file);
--            goto err;
-+            goto err_mutex;
-         }
-         backup_dir = task->backup_file;
- 
-@@ -841,18 +866,18 @@ static void coroutine_fn pvebackup_co_prepare(void *opaque)
-                             di->size, flags, false, &local_err);
-             if (local_err) {
-                 error_propagate(task->errp, local_err);
--                goto err;
-+                goto err_mutex;
-             }
- 
-             di->target = bdrv_open(di->targetfile, NULL, NULL, flags, &local_err);
-             if (!di->target) {
-                 error_propagate(task->errp, local_err);
--                goto err;
-+                goto err_mutex;
-             }
-         }
-     } else {
-         error_set(task->errp, ERROR_CLASS_GENERIC_ERROR, "unknown backup format");
--        goto err;
-+        goto err_mutex;
-     }
- 
- 
-@@ -860,7 +885,7 @@ static void coroutine_fn pvebackup_co_prepare(void *opaque)
-     if (task->has_config_file) {
-         if (pvebackup_co_add_config(task->config_file, config_name, format, backup_dir,
-                                     vmaw, pbs, task->errp) != 0) {
--            goto err;
-+            goto err_mutex;
-         }
-     }
- 
-@@ -868,12 +893,11 @@ static void coroutine_fn pvebackup_co_prepare(void *opaque)
-     if (task->has_firewall_file) {
-         if (pvebackup_co_add_config(task->firewall_file, firewall_name, format, backup_dir,
-                                     vmaw, pbs, task->errp) != 0) {
--            goto err;
-+            goto err_mutex;
-         }
-     }
-     /* initialize global backup_state now */
--
--    qemu_mutex_lock(&backup_state.stat.lock);
-+    /* note: 'reused' and 'bitmap_list' are initialized earlier */
- 
-     if (backup_state.stat.error) {
-         error_free(backup_state.stat.error);
-@@ -893,10 +917,9 @@ static void coroutine_fn pvebackup_co_prepare(void *opaque)
-     char *uuid_str = g_strdup(backup_state.stat.uuid_str);
- 
-     backup_state.stat.total = total;
--    backup_state.stat.dirty = dirty;
-+    backup_state.stat.dirty = total - backup_state.stat.reused;
-     backup_state.stat.transferred = 0;
-     backup_state.stat.zero_bytes = 0;
--    backup_state.stat.reused = format == BACKUP_FORMAT_PBS && dirty >= total ? 0 : total - dirty;
- 
-     qemu_mutex_unlock(&backup_state.stat.lock);
- 
-@@ -913,6 +936,9 @@ static void coroutine_fn pvebackup_co_prepare(void *opaque)
-     task->result = uuid_info;
-     return;
- 
-+err_mutex:
-+    qemu_mutex_unlock(&backup_state.stat.lock);
-+
- err:
- 
-     l = di_list;
-@@ -1076,11 +1102,42 @@ BackupStatus *qmp_query_backup(Error **errp)
-     return info;
- }
- 
-+PBSBitmapInfoList *qmp_query_pbs_bitmap_info(Error **errp)
-+{
-+    PBSBitmapInfoList *head = NULL, **p_next = &head;
-+
-+    qemu_mutex_lock(&backup_state.stat.lock);
-+
-+    GList *l = backup_state.stat.bitmap_list;
-+    while (l) {
-+        PBSBitmapInfo *info = (PBSBitmapInfo *)l->data;
-+        l = g_list_next(l);
-+
-+        /* clone bitmap info to avoid auto free after QMP marshalling */
-+        PBSBitmapInfo *info_ret = g_malloc0(sizeof(*info_ret));
-+        info_ret->drive = g_strdup(info->drive);
-+        info_ret->action = info->action;
-+        info_ret->size = info->size;
-+        info_ret->dirty = info->dirty;
-+
-+        PBSBitmapInfoList *info_list = g_malloc0(sizeof(*info_list));
-+        info_list->value = info_ret;
-+
-+        *p_next = info_list;
-+        p_next = &info_list->next;
-+    }
-+
-+    qemu_mutex_unlock(&backup_state.stat.lock);
-+
-+    return head;
-+}
-+
- ProxmoxSupportStatus *qmp_query_proxmox_support(Error **errp)
- {
-     ProxmoxSupportStatus *ret = g_malloc0(sizeof(*ret));
-     ret->pbs_library_version = g_strdup(proxmox_backup_qemu_version());
-     ret->pbs_dirty_bitmap = true;
-     ret->pbs_dirty_bitmap_savevm = true;
-+    ret->query_bitmap_info = true;
-     return ret;
- }
-diff --git a/qapi/block-core.json b/qapi/block-core.json
-index 3eebe7ff71..170c13984d 100644
---- a/qapi/block-core.json
-+++ b/qapi/block-core.json
-@@ -830,6 +830,8 @@
- # @pbs-dirty-bitmap: True if dirty-bitmap-incremental backups to PBS are
- #                    supported.
- #
-+# @query-bitmap-info: True if the 'query-pbs-bitmap-info' QMP call is supported.
-+#
- # @pbs-dirty-bitmap-savevm: True if 'dirty-bitmaps' migration capability can
- #                           safely be set for savevm-async.
- #
-@@ -838,6 +840,7 @@
- ##
- { 'struct': 'ProxmoxSupportStatus',
-   'data': { 'pbs-dirty-bitmap': 'bool',
-+            'query-bitmap-info': 'bool',
-             'pbs-dirty-bitmap-savevm': 'bool',
-             'pbs-library-version': 'str' } }
- 
-@@ -851,6 +854,59 @@
- ##
- { 'command': 'query-proxmox-support', 'returns': 'ProxmoxSupportStatus' }
- 
-+##
-+# @PBSBitmapAction:
-+#
-+# An action taken on a dirty-bitmap when a backup job was started.
-+#
-+# @not-used: Bitmap mode was not enabled.
-+#
-+# @not-used-removed: Bitmap mode was not enabled, but a bitmap from a
-+#                    previous backup still existed and was removed.
-+#
-+# @new: A new bitmap was attached to the drive for this backup.
-+#
-+# @used: An existing bitmap will be used to only backup changed data.
-+#
-+# @invalid: A bitmap existed, but had to be cleared since it's associated
-+#           base snapshot did not match the base given for the current job or
-+#           the crypt mode has changed.
-+#
-+##
-+{ 'enum': 'PBSBitmapAction',
-+  'data': ['not-used', 'not-used-removed', 'new', 'used', 'invalid'] }
-+
-+##
-+# @PBSBitmapInfo:
-+#
-+# Contains information about dirty bitmaps used for each drive in a PBS backup.
-+#
-+# @drive: The underlying drive.
-+#
-+# @action: The action that was taken when the backup started.
-+#
-+# @size: The total size of the drive.
-+#
-+# @dirty: How much of the drive is considered dirty and will be backed up,
-+#         or 'size' if everything will be.
-+#
-+##
-+{ 'struct': 'PBSBitmapInfo',
-+  'data': { 'drive': 'str', 'action': 'PBSBitmapAction', 'size': 'int',
-+            'dirty': 'int' } }
-+
-+##
-+# @query-pbs-bitmap-info:
-+#
-+# Returns information about dirty bitmaps used on the most recently started
-+# backup. Returns nothing when the last backup was not using PBS or if no
-+# backup occured in this session.
-+#
-+# Returns: @PBSBitmapInfo
-+#
-+##
-+{ 'command': 'query-pbs-bitmap-info', 'returns': ['PBSBitmapInfo'] }
-+
- ##
- # @BlockDeviceTimedStats:
- #

debian/patches/pve/0033-PVE-redirect-stderr-to-journal-when-daemonized.patch

@@ -7,51 +7,53 @@ QEMU uses the logging for error messages usually, so LOG_ERR is most
 fitting.
 
 Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
+Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
 ---
- meson.build | 2 ++
+ meson.build | 3 ++-
  os-posix.c  | 7 +++++--
- 2 files changed, 7 insertions(+), 2 deletions(-)
+ 2 files changed, 7 insertions(+), 3 deletions(-)
 
 diff --git a/meson.build b/meson.build
-index 3faec72a80..bae9ebe0c0 100644
+index 7e6130cfdf..984f858bdc 100644
 --- a/meson.build
 +++ b/meson.build
-@@ -1065,6 +1065,7 @@ keyutils = dependency('libkeyutils', required: false,
+@@ -2013,6 +2013,7 @@ endif
  has_gettid = cc.has_function('gettid')
  
  libuuid = cc.find_library('uuid', required: true)
 +libsystemd = cc.find_library('systemd', required: true)
  libproxmox_backup_qemu = cc.find_library('proxmox_backup_qemu', required: true)
  
- # Malloc tests
-@@ -2246,6 +2247,7 @@ if have_block
-   # os-posix.c contains POSIX-specific functions used by qemu-storage-daemon,
-   # os-win32.c does not
-   blockdev_ss.add(when: 'CONFIG_POSIX', if_true: files('os-posix.c'))
-+  blockdev_ss.add(when: 'CONFIG_POSIX', if_true: libsystemd)
-   softmmu_ss.add(when: 'CONFIG_WIN32', if_true: [files('os-win32.c')])
+ # libselinux
+@@ -3597,7 +3598,7 @@ if have_block
+   if host_os == 'windows'
+     system_ss.add(files('os-win32.c'))
+   else
+-    blockdev_ss.add(files('os-posix.c'))
++    blockdev_ss.add(files('os-posix.c'), libsystemd)
+   endif
  endif
  
 diff --git a/os-posix.c b/os-posix.c
-index ae6c9f2a5e..36807806bf 100644
+index 43f9a43f3f..a47e46d1c2 100644
 --- a/os-posix.c
 +++ b/os-posix.c
-@@ -28,6 +28,8 @@
+@@ -29,6 +29,8 @@
  #include <pwd.h>
  #include <grp.h>
  #include <libgen.h>
 +#include <systemd/sd-journal.h>
 +#include <syslog.h>
  
- #include "qemu-common.h"
- /* Needed early for CONFIG_BSD etc. */
-@@ -291,9 +293,10 @@ void os_setup_post(void)
+ #include "qemu/error-report.h"
+ #include "qemu/log.h"
+@@ -306,9 +308,10 @@ void os_setup_post(void)
  
          dup2(fd, 0);
          dup2(fd, 1);
 -        /* In case -D is given do not redirect stderr to /dev/null */
 +        /* In case -D is given do not redirect stderr to journal */
-         if (!qemu_logfile) {
+         if (!qemu_log_enabled()) {
 -            dup2(fd, 2);
 +            int journal_fd = sd_journal_stream_fd("QEMU", LOG_ERR, 0);
 +            dup2(journal_fd, 2);

debian/patches/pve/0034-PVE-Migrate-dirty-bitmap-state-via-savevm.patch

@@ -12,21 +12,24 @@ Also add a flag to query-proxmox-support so qemu-server can determine if
 safe migration is possible and makes sense.
 
 Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
+Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
+[FE: split up state_pending for 8.0]
+Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
 ---
  include/migration/misc.h |   3 ++
  migration/meson.build    |   2 +
  migration/migration.c    |   1 +
- migration/pbs-state.c    | 106 +++++++++++++++++++++++++++++++++++++++
+ migration/pbs-state.c    | 104 +++++++++++++++++++++++++++++++++++++++
  pve-backup.c             |   1 +
  qapi/block-core.json     |   6 +++
- 6 files changed, 119 insertions(+)
+ 6 files changed, 117 insertions(+)
  create mode 100644 migration/pbs-state.c
 
 diff --git a/include/migration/misc.h b/include/migration/misc.h
-index 465906710d..4f0aeceb6f 100644
+index bfadc5613b..e2e51fcf6b 100644
 --- a/include/migration/misc.h
 +++ b/include/migration/misc.h
-@@ -75,4 +75,7 @@ bool migration_in_bg_snapshot(void);
+@@ -111,4 +111,7 @@ bool migration_in_bg_snapshot(void);
  /* migration/block-dirty-bitmap.c */
  void dirty_bitmap_mig_init(void);
  
@@ -35,38 +38,43 @@ index 465906710d..4f0aeceb6f 100644
 +
  #endif
 diff --git a/migration/meson.build b/migration/meson.build
-index ea9aedeefc..c27dc9bd97 100644
+index 4b0c4f0f51..d039797132 100644
 --- a/migration/meson.build
 +++ b/migration/meson.build
-@@ -7,8 +7,10 @@ migration_files = files(
-   'qemu-file-channel.c',
+@@ -8,6 +8,7 @@ migration_files = files(
    'qemu-file.c',
    'yank_functions.c',
-+  'pbs-state.c',
  )
- softmmu_ss.add(migration_files)
-+softmmu_ss.add(libproxmox_backup_qemu)
++system_ss.add(libproxmox_backup_qemu)
  
- softmmu_ss.add(files(
+ system_ss.add(files(
    'block-dirty-bitmap.c',
+@@ -25,6 +26,7 @@ system_ss.add(files(
+   'multifd-zlib.c',
+   'multifd-zero-page.c',
+   'options.c',
++  'pbs-state.c',
+   'postcopy-ram.c',
+   'savevm.c',
+   'savevm-async.c',
 diff --git a/migration/migration.c b/migration/migration.c
-index 041b8451a6..9df2eed75e 100644
+index ae2be31557..fab4c20ee4 100644
 --- a/migration/migration.c
 +++ b/migration/migration.c
-@@ -218,6 +218,7 @@ void migration_object_init(void)
-     blk_mig_init();
+@@ -263,6 +263,7 @@ void migration_object_init(void)
+ 
      ram_mig_init();
      dirty_bitmap_mig_init();
 +    pbs_state_mig_init();
  }
  
- void migration_cancel(void)
+ typedef struct {
 diff --git a/migration/pbs-state.c b/migration/pbs-state.c
 new file mode 100644
-index 0000000000..29f2b3860d
+index 0000000000..a97187e4d7
 --- /dev/null
 +++ b/migration/pbs-state.c
-@@ -0,0 +1,106 @@
+@@ -0,0 +1,104 @@
 +/*
 + * PBS (dirty-bitmap) state migration
 + */
@@ -85,11 +93,8 @@ index 0000000000..29f2b3860d
 +/* state is accessed via this static variable directly, 'opaque' is NULL */
 +static PBSState pbs_state;
 +
-+static void pbs_state_save_pending(QEMUFile *f, void *opaque,
-+                                      uint64_t max_size,
-+                                      uint64_t *res_precopy_only,
-+                                      uint64_t *res_compatible,
-+                                      uint64_t *res_postcopy_only)
++static void pbs_state_pending(void *opaque, uint64_t *must_precopy,
++                              uint64_t *can_postcopy)
 +{
 +    /* we send everything in save_setup, so nothing is ever pending */
 +}
@@ -115,7 +120,7 @@ index 0000000000..29f2b3860d
 +}
 +
 +/* serialize PBS state and send to target via f, called on source */
-+static int pbs_state_save_setup(QEMUFile *f, void *opaque)
++static int pbs_state_save_setup(QEMUFile *f, void *opaque, Error **errp)
 +{
 +    size_t buf_size;
 +    uint8_t *buf = proxmox_export_state(&buf_size);
@@ -159,7 +164,8 @@ index 0000000000..29f2b3860d
 +static SaveVMHandlers savevm_pbs_state_handlers = {
 +    .save_setup = pbs_state_save_setup,
 +    .has_postcopy = pbs_state_has_postcopy,
-+    .save_live_pending = pbs_state_save_pending,
++    .state_pending_exact = pbs_state_pending,
++    .state_pending_estimate = pbs_state_pending,
 +    .is_active_iterate = pbs_state_is_active_iterate,
 +    .load_state = pbs_state_load,
 +    .is_active = pbs_state_is_active,
@@ -174,22 +180,22 @@ index 0000000000..29f2b3860d
 +                         NULL);
 +}
 diff --git a/pve-backup.c b/pve-backup.c
-index 9c20ef3a5e..59ccb38ceb 100644
+index 9f83ecb310..57477f7f2a 100644
 --- a/pve-backup.c
 +++ b/pve-backup.c
-@@ -1132,6 +1132,7 @@ ProxmoxSupportStatus *qmp_query_proxmox_support(Error **errp)
+@@ -1085,6 +1085,7 @@ ProxmoxSupportStatus *qmp_query_proxmox_support(Error **errp)
      ret->pbs_library_version = g_strdup(proxmox_backup_qemu_version());
      ret->pbs_dirty_bitmap = true;
      ret->pbs_dirty_bitmap_savevm = true;
 +    ret->pbs_dirty_bitmap_migration = true;
      ret->query_bitmap_info = true;
-     return ret;
- }
+     ret->pbs_masterkey = true;
+     ret->backup_max_workers = true;
 diff --git a/qapi/block-core.json b/qapi/block-core.json
-index a0d1d278e9..e5de769dc1 100644
+index fe0eefcea6..521a1914e8 100644
 --- a/qapi/block-core.json
 +++ b/qapi/block-core.json
-@@ -838,6 +838,11 @@
+@@ -1004,6 +1004,11 @@
  # @pbs-dirty-bitmap-savevm: True if 'dirty-bitmaps' migration capability can
  #                           safely be set for savevm-async.
  #
@@ -198,14 +204,14 @@ index a0d1d278e9..e5de769dc1 100644
 +#                              migration cap if this is false/unset may lead
 +#                              to crashes on migration!
 +#
- # @pbs-library-version: Running version of libproxmox-backup-qemu0 library.
+ # @pbs-masterkey: True if the QMP backup call supports the 'master_keyfile'
+ #                 parameter.
  #
- ##
-@@ -845,6 +850,7 @@
+@@ -1017,6 +1022,7 @@
    'data': { 'pbs-dirty-bitmap': 'bool',
              'query-bitmap-info': 'bool',
              'pbs-dirty-bitmap-savevm': 'bool',
 +            'pbs-dirty-bitmap-migration': 'bool',
-             'pbs-library-version': 'str' } }
- 
- ##
+             'pbs-masterkey': 'bool',
+             'pbs-library-version': 'str',
+             'backup-max-workers': 'bool' } }

debian/patches/pve/0035-migration-block-dirty-bitmap-migrate-other-bitmaps-e.patch

@@ -13,19 +13,23 @@ that are obviously marked as "busy", which would cause none at all to be
 transferred.
 
 Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
+Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
 ---
- migration/block-dirty-bitmap.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
+ migration/block-dirty-bitmap.c | 5 ++++-
+ 1 file changed, 4 insertions(+), 1 deletion(-)
 
 diff --git a/migration/block-dirty-bitmap.c b/migration/block-dirty-bitmap.c
-index 35f5ef688d..c4640925e7 100644
+index a7d55048c2..77346a5fa2 100644
 --- a/migration/block-dirty-bitmap.c
 +++ b/migration/block-dirty-bitmap.c
-@@ -538,7 +538,7 @@ static int add_bitmaps_to_list(DBMSaveState *s, BlockDriverState *bs,
+@@ -539,7 +539,10 @@ static int add_bitmaps_to_list(DBMSaveState *s, BlockDriverState *bs,
+         }
  
-         if (bdrv_dirty_bitmap_check(bitmap, BDRV_BITMAP_DEFAULT, &local_err)) {
-             error_report_err(local_err);
+         if (bdrv_dirty_bitmap_check(bitmap, BDRV_BITMAP_DEFAULT, errp)) {
 -            return -1;
++            if (errp != NULL) {
++                error_report_err(*errp);
++            }
 +            continue;
          }
  

debian/patches/pve/0036-PVE-Backup-Use-a-transaction-to-synchronize-job-stat.patch

@@ -1,292 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Stefan Reiter <s.reiter@proxmox.com>
-Date: Thu, 20 Aug 2020 14:25:00 +0200
-Subject: [PATCH] PVE-Backup: Use a transaction to synchronize job states
-
-By using a JobTxn, we can sync dirty bitmaps only when *all* jobs were
-successful - meaning we don't need to remove them when the backup fails,
-since QEMU's BITMAP_SYNC_MODE_ON_SUCCESS will now handle that for us.
-
-To keep the rate-limiting and IO impact from before, we use a sequential
-transaction, so drives will still be backed up one after the other.
-
-Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
----
- pve-backup.c | 167 +++++++++++++++------------------------------------
- 1 file changed, 49 insertions(+), 118 deletions(-)
-
-diff --git a/pve-backup.c b/pve-backup.c
-index 22420db26a..2e628d68e4 100644
---- a/pve-backup.c
-+++ b/pve-backup.c
-@@ -52,6 +52,7 @@ static struct PVEBackupState {
-     VmaWriter *vmaw;
-     ProxmoxBackupHandle *pbs;
-     GList *di_list;
-+    JobTxn *txn;
-     QemuMutex backup_mutex;
-     CoMutex dump_callback_mutex;
- } backup_state;
-@@ -71,32 +72,12 @@ typedef struct PVEBackupDevInfo {
-     size_t size;
-     uint64_t block_size;
-     uint8_t dev_id;
--    bool completed;
-     char targetfile[PATH_MAX];
-     BdrvDirtyBitmap *bitmap;
-     BlockDriverState *target;
-+    BlockJob *job;
- } PVEBackupDevInfo;
- 
--static void pvebackup_run_next_job(void);
--
--static BlockJob *
--lookup_active_block_job(PVEBackupDevInfo *di)
--{
--    if (!di->completed && di->bs) {
--        for (BlockJob *job = block_job_next(NULL); job; job = block_job_next(job)) {
--            if (job->job.driver->job_type != JOB_TYPE_BACKUP) {
--                continue;
--            }
--
--            BackupBlockJob *bjob = container_of(job, BackupBlockJob, common);
--            if (bjob && bjob->source_bs == di->bs) {
--                return job;
--            }
--        }
--    }
--    return NULL;
--}
--
- static void pvebackup_propagate_error(Error *err)
- {
-     qemu_mutex_lock(&backup_state.stat.lock);
-@@ -272,18 +253,6 @@ static void coroutine_fn pvebackup_co_cleanup(void *unused)
-             if (local_err != NULL) {
-                 pvebackup_propagate_error(local_err);
-             }
--        } else {
--            // on error or cancel we cannot ensure synchronization of dirty
--            // bitmaps with backup server, so remove all and do full backup next
--            GList *l = backup_state.di_list;
--            while (l) {
--                PVEBackupDevInfo *di = (PVEBackupDevInfo *)l->data;
--                l = g_list_next(l);
--
--                if (di->bitmap) {
--                    bdrv_release_dirty_bitmap(di->bitmap);
--                }
--            }
-         }
- 
-         proxmox_backup_disconnect(backup_state.pbs);
-@@ -322,8 +291,6 @@ static void pvebackup_complete_cb(void *opaque, int ret)
- 
-     qemu_mutex_lock(&backup_state.backup_mutex);
- 
--    di->completed = true;
--
-     if (ret < 0) {
-         Error *local_err = NULL;
-         error_setg(&local_err, "job failed with err %d - %s", ret, strerror(-ret));
-@@ -336,20 +303,17 @@ static void pvebackup_complete_cb(void *opaque, int ret)
- 
-     block_on_coroutine_fn(pvebackup_complete_stream, di);
- 
--    // remove self from job queue
-+    // remove self from job list
-     backup_state.di_list = g_list_remove(backup_state.di_list, di);
- 
--    if (di->bitmap && ret < 0) {
--        // on error or cancel we cannot ensure synchronization of dirty
--        // bitmaps with backup server, so remove all and do full backup next
--        bdrv_release_dirty_bitmap(di->bitmap);
--    }
--
-     g_free(di);
- 
--    qemu_mutex_unlock(&backup_state.backup_mutex);
-+    /* call cleanup if we're the last job */
-+    if (!g_list_first(backup_state.di_list)) {
-+        block_on_coroutine_fn(pvebackup_co_cleanup, NULL);
-+    }
- 
--    pvebackup_run_next_job();
-+    qemu_mutex_unlock(&backup_state.backup_mutex);
- }
- 
- static void pvebackup_cancel(void)
-@@ -371,36 +335,28 @@ static void pvebackup_cancel(void)
-         proxmox_backup_abort(backup_state.pbs, "backup canceled");
-     }
- 
--    qemu_mutex_unlock(&backup_state.backup_mutex);
--
--    for(;;) {
--
--        BlockJob *next_job = NULL;
--
--        qemu_mutex_lock(&backup_state.backup_mutex);
--
--        GList *l = backup_state.di_list;
--        while (l) {
--            PVEBackupDevInfo *di = (PVEBackupDevInfo *)l->data;
--            l = g_list_next(l);
-+    /* it's enough to cancel one job in the transaction, the rest will follow
-+     * automatically */
-+    GList *bdi = g_list_first(backup_state.di_list);
-+    BlockJob *cancel_job = bdi && bdi->data ?
-+        ((PVEBackupDevInfo *)bdi->data)->job :
-+        NULL;
- 
--            BlockJob *job = lookup_active_block_job(di);
--            if (job != NULL) {
--                next_job = job;
--                break;
--            }
--        }
-+    /* ref the job before releasing the mutex, just to be safe */
-+    if (cancel_job) {
-+        job_ref(&cancel_job->job);
-+    }
- 
--        qemu_mutex_unlock(&backup_state.backup_mutex);
-+    /* job_cancel_sync may enter the job, so we need to release the
-+     * backup_mutex to avoid deadlock */
-+    qemu_mutex_unlock(&backup_state.backup_mutex);
- 
--        if (next_job) {
--            AioContext *aio_context = next_job->job.aio_context;
--            aio_context_acquire(aio_context);
--            job_cancel_sync(&next_job->job);
--            aio_context_release(aio_context);
--        } else {
--            break;
--        }
-+    if (cancel_job) {
-+        AioContext *aio_context = cancel_job->job.aio_context;
-+        aio_context_acquire(aio_context);
-+        job_cancel_sync(&cancel_job->job);
-+        job_unref(&cancel_job->job);
-+        aio_context_release(aio_context);
-     }
- }
- 
-@@ -459,51 +415,19 @@ static int coroutine_fn pvebackup_co_add_config(
-     goto out;
- }
- 
--bool job_should_pause(Job *job);
--
--static void pvebackup_run_next_job(void)
--{
--    assert(!qemu_in_coroutine());
--
--    qemu_mutex_lock(&backup_state.backup_mutex);
--
--    GList *l = backup_state.di_list;
--    while (l) {
--        PVEBackupDevInfo *di = (PVEBackupDevInfo *)l->data;
--        l = g_list_next(l);
--
--        BlockJob *job = lookup_active_block_job(di);
--
--        if (job) {
--            qemu_mutex_unlock(&backup_state.backup_mutex);
--
--            AioContext *aio_context = job->job.aio_context;
--            aio_context_acquire(aio_context);
--
--            if (job_should_pause(&job->job)) {
--                bool error_or_canceled = pvebackup_error_or_canceled();
--                if (error_or_canceled) {
--                    job_cancel_sync(&job->job);
--                } else {
--                    job_resume(&job->job);
--                }
--            }
--            aio_context_release(aio_context);
--            return;
--        }
--    }
--
--    block_on_coroutine_fn(pvebackup_co_cleanup, NULL); // no more jobs, run cleanup
--
--    qemu_mutex_unlock(&backup_state.backup_mutex);
--}
--
- static bool create_backup_jobs(void) {
- 
-     assert(!qemu_in_coroutine());
- 
-     Error *local_err = NULL;
- 
-+    /* create job transaction to synchronize bitmap commit and cancel all
-+     * jobs in case one errors */
-+    if (backup_state.txn) {
-+        job_txn_unref(backup_state.txn);
-+    }
-+    backup_state.txn = job_txn_new_seq();
-+
-     BackupPerf perf = { .max_workers = 16 };
- 
-     /* create and start all jobs (paused state) */
-@@ -526,7 +450,7 @@ static bool create_backup_jobs(void) {
-         BlockJob *job = backup_job_create(
-             NULL, di->bs, di->target, backup_state.speed, sync_mode, di->bitmap,
-             bitmap_mode, false, NULL, &perf, BLOCKDEV_ON_ERROR_REPORT, BLOCKDEV_ON_ERROR_REPORT,
--            JOB_DEFAULT, pvebackup_complete_cb, di, NULL, &local_err);
-+            JOB_DEFAULT, pvebackup_complete_cb, di, backup_state.txn, &local_err);
- 
-         aio_context_release(aio_context);
- 
-@@ -538,7 +462,8 @@ static bool create_backup_jobs(void) {
-             pvebackup_propagate_error(create_job_err);
-             break;
-         }
--        job_start(&job->job);
-+
-+        di->job = job;
- 
-         bdrv_unref(di->target);
-         di->target = NULL;
-@@ -556,6 +481,10 @@ static bool create_backup_jobs(void) {
-                 bdrv_unref(di->target);
-                 di->target = NULL;
-             }
-+
-+            if (di->job) {
-+                job_unref(&di->job->job);
-+            }
-         }
-     }
- 
-@@ -946,10 +875,6 @@ err:
-         PVEBackupDevInfo *di = (PVEBackupDevInfo *)l->data;
-         l = g_list_next(l);
- 
--        if (di->bitmap) {
--            bdrv_release_dirty_bitmap(di->bitmap);
--        }
--
-         if (di->target) {
-             bdrv_unref(di->target);
-         }
-@@ -1038,9 +963,15 @@ UuidInfo *qmp_backup(
-     block_on_coroutine_fn(pvebackup_co_prepare, &task);
- 
-     if (*errp == NULL) {
--        create_backup_jobs();
-+        bool errors = create_backup_jobs();
-         qemu_mutex_unlock(&backup_state.backup_mutex);
--        pvebackup_run_next_job();
-+
-+        if (!errors) {
-+            /* start the first job in the transaction
-+             * note: this might directly enter the job, so we need to do this
-+             * after unlocking the backup_mutex */
-+            job_txn_start_seq(backup_state.txn);
-+        }
-     } else {
-         qemu_mutex_unlock(&backup_state.backup_mutex);
-     }

debian/patches/pve/0036-PVE-fall-back-to-open-iscsi-initiatorname.patch

@@ -15,15 +15,16 @@ According to RFC 3720, an initiator name is at most 223 bytes long, so the
 4 KiB buffer is big enough, even if many whitespaces are used.
 
 Signed-off-by: Fabian Ebner <f.ebner@proxmox.com>
+Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
 ---
  block/iscsi.c | 30 ++++++++++++++++++++++++++++++
  1 file changed, 30 insertions(+)
 
 diff --git a/block/iscsi.c b/block/iscsi.c
-index 4d2a416ce7..c345d30812 100644
+index 979bf90cb7..961714a4be 100644
 --- a/block/iscsi.c
 +++ b/block/iscsi.c
-@@ -1372,12 +1372,42 @@ static char *get_initiator_name(QemuOpts *opts)
+@@ -1392,12 +1392,42 @@ static char *get_initiator_name(QemuOpts *opts)
      const char *name;
      char *iscsi_name;
      UuidInfo *uuid_info;

debian/patches/pve/0037-PVE-Backup-Don-t-block-on-finishing-and-cleanup-crea.patch

@@ -1,500 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Stefan Reiter <s.reiter@proxmox.com>
-Date: Mon, 28 Sep 2020 13:40:51 +0200
-Subject: [PATCH] PVE-Backup: Don't block on finishing and cleanup
- create_backup_jobs
-
-proxmox_backup_co_finish is already async, but previously we would wait
-for the coroutine using block_on_coroutine_fn(). Avoid this by
-scheduling pvebackup_co_complete_stream (and thus pvebackup_co_cleanup)
-as a real coroutine when calling from pvebackup_complete_cb. This is ok,
-since complete_stream uses the backup_mutex internally to synchronize,
-and other streams can happily continue writing in the meantime anyway.
-
-To accomodate, backup_mutex is converted to a CoMutex. This means
-converting every user to a coroutine. This is not just useful here, but
-will come in handy once this series[0] is merged, and QMP calls can be
-yield-able coroutines too. Then we can also finally get rid of
-block_on_coroutine_fn.
-
-Cases of aio_context_acquire/release from within what is now a coroutine
-are changed to aio_co_reschedule_self, which works since a running
-coroutine always holds the aio lock for the context it is running in.
-
-job_cancel_sync is called from a BH since it can't be run from a
-coroutine (uses AIO_WAIT_WHILE internally).
-
-Same thing for create_backup_jobs, which is converted to a BH too.
-
-To communicate the finishing state, a new property is introduced to
-query-backup: 'finishing'. A new state is explicitly not used, since
-that would break compatibility with older qemu-server versions.
-
-Also fix create_backup_jobs:
-
-No more weird bool returns, just the standard "errp" format used
-everywhere else too. With this, if backup_job_create fails, the error
-message is actually returned over QMP and can be shown to the user.
-
-To facilitate correct cleanup on such an error, we call
-create_backup_jobs as a bottom half directly from pvebackup_co_prepare.
-This additionally allows us to actually hold the backup_mutex during
-operation.
-
-Also add a job_cancel_sync before job_unref, since a job must be in
-STATUS_NULL to be deleted by unref, which could trigger an assert
-before.
-
-[0] https://lists.gnu.org/archive/html/qemu-devel/2020-09/msg03515.html
-
-Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
----
- pve-backup.c         | 217 ++++++++++++++++++++++++++++---------------
- qapi/block-core.json |   5 +-
- 2 files changed, 144 insertions(+), 78 deletions(-)
-
-diff --git a/pve-backup.c b/pve-backup.c
-index 2e628d68e4..9c20ef3a5e 100644
---- a/pve-backup.c
-+++ b/pve-backup.c
-@@ -33,7 +33,9 @@ const char *PBS_BITMAP_NAME = "pbs-incremental-dirty-bitmap";
- 
- static struct PVEBackupState {
-     struct {
--        // Everithing accessed from qmp_backup_query command is protected using lock
-+        // Everything accessed from qmp_backup_query command is protected using
-+        // this lock. Do NOT hold this lock for long times, as it is sometimes
-+        // acquired from coroutines, and thus any wait time may block the guest.
-         QemuMutex lock;
-         Error *error;
-         time_t start_time;
-@@ -47,20 +49,22 @@ static struct PVEBackupState {
-         size_t reused;
-         size_t zero_bytes;
-         GList *bitmap_list;
-+        bool finishing;
-+        bool starting;
-     } stat;
-     int64_t speed;
-     VmaWriter *vmaw;
-     ProxmoxBackupHandle *pbs;
-     GList *di_list;
-     JobTxn *txn;
--    QemuMutex backup_mutex;
-+    CoMutex backup_mutex;
-     CoMutex dump_callback_mutex;
- } backup_state;
- 
- static void pvebackup_init(void)
- {
-     qemu_mutex_init(&backup_state.stat.lock);
--    qemu_mutex_init(&backup_state.backup_mutex);
-+    qemu_co_mutex_init(&backup_state.backup_mutex);
-     qemu_co_mutex_init(&backup_state.dump_callback_mutex);
- }
- 
-@@ -72,6 +76,7 @@ typedef struct PVEBackupDevInfo {
-     size_t size;
-     uint64_t block_size;
-     uint8_t dev_id;
-+    int completed_ret; // INT_MAX if not completed
-     char targetfile[PATH_MAX];
-     BdrvDirtyBitmap *bitmap;
-     BlockDriverState *target;
-@@ -227,12 +232,12 @@ pvebackup_co_dump_vma_cb(
- }
- 
- // assumes the caller holds backup_mutex
--static void coroutine_fn pvebackup_co_cleanup(void *unused)
-+static void coroutine_fn pvebackup_co_cleanup(void)
- {
-     assert(qemu_in_coroutine());
- 
-     qemu_mutex_lock(&backup_state.stat.lock);
--    backup_state.stat.end_time = time(NULL);
-+    backup_state.stat.finishing = true;
-     qemu_mutex_unlock(&backup_state.stat.lock);
- 
-     if (backup_state.vmaw) {
-@@ -261,35 +266,29 @@ static void coroutine_fn pvebackup_co_cleanup(void *unused)
- 
-     g_list_free(backup_state.di_list);
-     backup_state.di_list = NULL;
-+
-+    qemu_mutex_lock(&backup_state.stat.lock);
-+    backup_state.stat.end_time = time(NULL);
-+    backup_state.stat.finishing = false;
-+    qemu_mutex_unlock(&backup_state.stat.lock);
- }
- 
--// assumes the caller holds backup_mutex
--static void coroutine_fn pvebackup_complete_stream(void *opaque)
-+static void coroutine_fn pvebackup_co_complete_stream(void *opaque)
- {
-     PVEBackupDevInfo *di = opaque;
-+    int ret = di->completed_ret;
- 
--    bool error_or_canceled = pvebackup_error_or_canceled();
--
--    if (backup_state.vmaw) {
--        vma_writer_close_stream(backup_state.vmaw, di->dev_id);
-+    qemu_mutex_lock(&backup_state.stat.lock);
-+    bool starting = backup_state.stat.starting;
-+    qemu_mutex_unlock(&backup_state.stat.lock);
-+    if (starting) {
-+        /* in 'starting' state, no tasks have been run yet, meaning we can (and
-+         * must) skip all cleanup, as we don't know what has and hasn't been
-+         * initialized yet. */
-+        return;
-     }
- 
--    if (backup_state.pbs && !error_or_canceled) {
--        Error *local_err = NULL;
--        proxmox_backup_co_close_image(backup_state.pbs, di->dev_id, &local_err);
--        if (local_err != NULL) {
--            pvebackup_propagate_error(local_err);
--        }
--    }
--}
--
--static void pvebackup_complete_cb(void *opaque, int ret)
--{
--    assert(!qemu_in_coroutine());
--
--    PVEBackupDevInfo *di = opaque;
--
--    qemu_mutex_lock(&backup_state.backup_mutex);
-+    qemu_co_mutex_lock(&backup_state.backup_mutex);
- 
-     if (ret < 0) {
-         Error *local_err = NULL;
-@@ -301,7 +300,19 @@ static void pvebackup_complete_cb(void *opaque, int ret)
- 
-     assert(di->target == NULL);
- 
--    block_on_coroutine_fn(pvebackup_complete_stream, di);
-+    bool error_or_canceled = pvebackup_error_or_canceled();
-+
-+    if (backup_state.vmaw) {
-+        vma_writer_close_stream(backup_state.vmaw, di->dev_id);
-+    }
-+
-+    if (backup_state.pbs && !error_or_canceled) {
-+        Error *local_err = NULL;
-+        proxmox_backup_co_close_image(backup_state.pbs, di->dev_id, &local_err);
-+        if (local_err != NULL) {
-+            pvebackup_propagate_error(local_err);
-+        }
-+    }
- 
-     // remove self from job list
-     backup_state.di_list = g_list_remove(backup_state.di_list, di);
-@@ -310,21 +321,49 @@ static void pvebackup_complete_cb(void *opaque, int ret)
- 
-     /* call cleanup if we're the last job */
-     if (!g_list_first(backup_state.di_list)) {
--        block_on_coroutine_fn(pvebackup_co_cleanup, NULL);
-+        pvebackup_co_cleanup();
-     }
- 
--    qemu_mutex_unlock(&backup_state.backup_mutex);
-+    qemu_co_mutex_unlock(&backup_state.backup_mutex);
- }
- 
--static void pvebackup_cancel(void)
-+static void pvebackup_complete_cb(void *opaque, int ret)
- {
--    assert(!qemu_in_coroutine());
-+    PVEBackupDevInfo *di = opaque;
-+    di->completed_ret = ret;
-+
-+    /*
-+     * Schedule stream cleanup in async coroutine. close_image and finish might
-+     * take a while, so we can't block on them here. This way it also doesn't
-+     * matter if we're already running in a coroutine or not.
-+     * Note: di is a pointer to an entry in the global backup_state struct, so
-+     * it stays valid.
-+     */
-+    Coroutine *co = qemu_coroutine_create(pvebackup_co_complete_stream, di);
-+    aio_co_enter(qemu_get_aio_context(), co);
-+}
-+
-+/*
-+ * job_cancel(_sync) does not like to be called from coroutines, so defer to
-+ * main loop processing via a bottom half.
-+ */
-+static void job_cancel_bh(void *opaque) {
-+    CoCtxData *data = (CoCtxData*)opaque;
-+    Job *job = (Job*)data->data;
-+    AioContext *job_ctx = job->aio_context;
-+    aio_context_acquire(job_ctx);
-+    job_cancel_sync(job);
-+    aio_context_release(job_ctx);
-+    aio_co_enter(data->ctx, data->co);
-+}
- 
-+static void coroutine_fn pvebackup_co_cancel(void *opaque)
-+{
-     Error *cancel_err = NULL;
-     error_setg(&cancel_err, "backup canceled");
-     pvebackup_propagate_error(cancel_err);
- 
--    qemu_mutex_lock(&backup_state.backup_mutex);
-+    qemu_co_mutex_lock(&backup_state.backup_mutex);
- 
-     if (backup_state.vmaw) {
-         /* make sure vma writer does not block anymore */
-@@ -342,27 +381,22 @@ static void pvebackup_cancel(void)
-         ((PVEBackupDevInfo *)bdi->data)->job :
-         NULL;
- 
--    /* ref the job before releasing the mutex, just to be safe */
-     if (cancel_job) {
--        job_ref(&cancel_job->job);
-+        CoCtxData data = {
-+            .ctx = qemu_get_current_aio_context(),
-+            .co = qemu_coroutine_self(),
-+            .data = &cancel_job->job,
-+        };
-+        aio_bh_schedule_oneshot(data.ctx, job_cancel_bh, &data);
-+        qemu_coroutine_yield();
-     }
- 
--    /* job_cancel_sync may enter the job, so we need to release the
--     * backup_mutex to avoid deadlock */
--    qemu_mutex_unlock(&backup_state.backup_mutex);
--
--    if (cancel_job) {
--        AioContext *aio_context = cancel_job->job.aio_context;
--        aio_context_acquire(aio_context);
--        job_cancel_sync(&cancel_job->job);
--        job_unref(&cancel_job->job);
--        aio_context_release(aio_context);
--    }
-+    qemu_co_mutex_unlock(&backup_state.backup_mutex);
- }
- 
- void qmp_backup_cancel(Error **errp)
- {
--    pvebackup_cancel();
-+    block_on_coroutine_fn(pvebackup_co_cancel, NULL);
- }
- 
- // assumes the caller holds backup_mutex
-@@ -415,10 +449,18 @@ static int coroutine_fn pvebackup_co_add_config(
-     goto out;
- }
- 
--static bool create_backup_jobs(void) {
-+/*
-+ * backup_job_create can *not* be run from a coroutine (and requires an
-+ * acquired AioContext), so this can't either.
-+ * The caller is responsible that backup_mutex is held nonetheless.
-+ */
-+static void create_backup_jobs_bh(void *opaque) {
- 
-     assert(!qemu_in_coroutine());
- 
-+    CoCtxData *data = (CoCtxData*)opaque;
-+    Error **errp = (Error**)data->data;
-+
-     Error *local_err = NULL;
- 
-     /* create job transaction to synchronize bitmap commit and cancel all
-@@ -454,24 +496,19 @@ static bool create_backup_jobs(void) {
- 
-         aio_context_release(aio_context);
- 
--        if (!job || local_err != NULL) {
--            Error *create_job_err = NULL;
--            error_setg(&create_job_err, "backup_job_create failed: %s",
--                       local_err ? error_get_pretty(local_err) : "null");
-+        di->job = job;
- 
--            pvebackup_propagate_error(create_job_err);
-+        if (!job || local_err) {
-+            error_setg(errp, "backup_job_create failed: %s",
-+                       local_err ? error_get_pretty(local_err) : "null");
-             break;
-         }
- 
--        di->job = job;
--
-         bdrv_unref(di->target);
-         di->target = NULL;
-     }
- 
--    bool errors = pvebackup_error_or_canceled();
--
--    if (errors) {
-+    if (*errp) {
-         l = backup_state.di_list;
-         while (l) {
-             PVEBackupDevInfo *di = (PVEBackupDevInfo *)l->data;
-@@ -483,12 +520,17 @@ static bool create_backup_jobs(void) {
-             }
- 
-             if (di->job) {
-+                AioContext *ctx = di->job->job.aio_context;
-+                aio_context_acquire(ctx);
-+                job_cancel_sync(&di->job->job);
-                 job_unref(&di->job->job);
-+                aio_context_release(ctx);
-             }
-         }
-     }
- 
--    return errors;
-+    /* return */
-+    aio_co_enter(data->ctx, data->co);
- }
- 
- typedef struct QmpBackupTask {
-@@ -525,11 +567,12 @@ typedef struct QmpBackupTask {
-     UuidInfo *result;
- } QmpBackupTask;
- 
--// assumes the caller holds backup_mutex
- static void coroutine_fn pvebackup_co_prepare(void *opaque)
- {
-     assert(qemu_in_coroutine());
- 
-+    qemu_co_mutex_lock(&backup_state.backup_mutex);
-+
-     QmpBackupTask *task = opaque;
- 
-     task->result = NULL; // just to be sure
-@@ -550,8 +593,9 @@ static void coroutine_fn pvebackup_co_prepare(void *opaque)
-     const char *firewall_name = "qemu-server.fw";
- 
-     if (backup_state.di_list) {
--         error_set(task->errp, ERROR_CLASS_GENERIC_ERROR,
-+        error_set(task->errp, ERROR_CLASS_GENERIC_ERROR,
-                   "previous backup not finished");
-+        qemu_co_mutex_unlock(&backup_state.backup_mutex);
-         return;
-     }
- 
-@@ -618,6 +662,8 @@ static void coroutine_fn pvebackup_co_prepare(void *opaque)
-         }
-         di->size = size;
-         total += size;
-+
-+        di->completed_ret = INT_MAX;
-     }
- 
-     uuid_generate(uuid);
-@@ -849,6 +895,8 @@ static void coroutine_fn pvebackup_co_prepare(void *opaque)
-     backup_state.stat.dirty = total - backup_state.stat.reused;
-     backup_state.stat.transferred = 0;
-     backup_state.stat.zero_bytes = 0;
-+    backup_state.stat.finishing = false;
-+    backup_state.stat.starting = true;
- 
-     qemu_mutex_unlock(&backup_state.stat.lock);
- 
-@@ -863,6 +911,33 @@ static void coroutine_fn pvebackup_co_prepare(void *opaque)
-     uuid_info->UUID = uuid_str;
- 
-     task->result = uuid_info;
-+
-+    /* Run create_backup_jobs_bh outside of coroutine (in BH) but keep
-+    * backup_mutex locked. This is fine, a CoMutex can be held across yield
-+    * points, and we'll release it as soon as the BH reschedules us.
-+    */
-+    CoCtxData waker = {
-+        .co = qemu_coroutine_self(),
-+        .ctx = qemu_get_current_aio_context(),
-+        .data = &local_err,
-+    };
-+    aio_bh_schedule_oneshot(waker.ctx, create_backup_jobs_bh, &waker);
-+    qemu_coroutine_yield();
-+
-+    if (local_err) {
-+        error_propagate(task->errp, local_err);
-+        goto err;
-+    }
-+
-+    qemu_co_mutex_unlock(&backup_state.backup_mutex);
-+
-+    qemu_mutex_lock(&backup_state.stat.lock);
-+    backup_state.stat.starting = false;
-+    qemu_mutex_unlock(&backup_state.stat.lock);
-+
-+    /* start the first job in the transaction */
-+    job_txn_start_seq(backup_state.txn);
-+
-     return;
- 
- err_mutex:
-@@ -885,6 +960,7 @@ err:
-         g_free(di);
-     }
-     g_list_free(di_list);
-+    backup_state.di_list = NULL;
- 
-     if (devs) {
-         g_strfreev(devs);
-@@ -905,6 +981,8 @@ err:
-     }
- 
-     task->result = NULL;
-+
-+    qemu_co_mutex_unlock(&backup_state.backup_mutex);
-     return;
- }
- 
-@@ -958,24 +1036,8 @@ UuidInfo *qmp_backup(
-         .errp = errp,
-     };
- 
--    qemu_mutex_lock(&backup_state.backup_mutex);
--
-     block_on_coroutine_fn(pvebackup_co_prepare, &task);
- 
--    if (*errp == NULL) {
--        bool errors = create_backup_jobs();
--        qemu_mutex_unlock(&backup_state.backup_mutex);
--
--        if (!errors) {
--            /* start the first job in the transaction
--             * note: this might directly enter the job, so we need to do this
--             * after unlocking the backup_mutex */
--            job_txn_start_seq(backup_state.txn);
--        }
--    } else {
--        qemu_mutex_unlock(&backup_state.backup_mutex);
--    }
--
-     return task.result;
- }
- 
-@@ -1027,6 +1089,7 @@ BackupStatus *qmp_query_backup(Error **errp)
-     info->transferred = backup_state.stat.transferred;
-     info->has_reused = true;
-     info->reused = backup_state.stat.reused;
-+    info->finishing = backup_state.stat.finishing;
- 
-     qemu_mutex_unlock(&backup_state.stat.lock);
- 
-diff --git a/qapi/block-core.json b/qapi/block-core.json
-index 170c13984d..a0d1d278e9 100644
---- a/qapi/block-core.json
-+++ b/qapi/block-core.json
-@@ -729,12 +729,15 @@
- #
- # @uuid: uuid for this backup job
- #
-+# @finishing: if status='active' and finishing=true, then the backup process is
-+#             waiting for the target to finish.
-+#
- ##
- { 'struct': 'BackupStatus',
-   'data': {'*status': 'str', '*errmsg': 'str', '*total': 'int', '*dirty': 'int',
-            '*transferred': 'int', '*zero-bytes': 'int', '*reused': 'int',
-            '*start-time': 'int', '*end-time': 'int',
--           '*backup-file': 'str', '*uuid': 'str' } }
-+           '*backup-file': 'str', '*uuid': 'str', 'finishing': 'bool' } }
- 
- ##
- # @BackupFormat:

debian/patches/pve/0037-PVE-block-stream-increase-chunk-size.patch

@@ -4,15 +4,17 @@ Date: Tue, 2 Mar 2021 16:34:28 +0100
 Subject: [PATCH] PVE: block/stream: increase chunk size
 
 Ceph favors bigger chunks, so increase to 4M.
+
+Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
 ---
  block/stream.c | 2 +-
  1 file changed, 1 insertion(+), 1 deletion(-)
 
 diff --git a/block/stream.c b/block/stream.c
-index 97bee482dc..50093c9f57 100644
+index 7031eef12b..d2da83ae7c 100644
 --- a/block/stream.c
 +++ b/block/stream.c
-@@ -28,7 +28,7 @@ enum {
+@@ -27,7 +27,7 @@ enum {
       * large enough to process multiple clusters in a single call, so
       * that populating contiguous regions of the image is efficient.
       */

debian/patches/pve/0038-block-add-alloc-track-driver.patch

@@ -19,22 +19,33 @@ well.
 This only worked if the target supports backing images, so up until now
 only for qcow2, with alloc-track any driver for the target can be used.
 
-If 'auto-remove' is set, alloc-track will automatically detach itself
-once the backing image is removed. It will be replaced by 'file'.
+Replacing the node cannot be done in the
+track_co_change_backing_file() callback, because replacing a node
+cannot happen in a coroutine and requires the block graph lock
+exclusively. Could either become a special option for the stream job,
+or maybe the upcoming blockdev-replace QMP command can be used in the
+future.
 
 Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
+Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
+[FE: adapt to changed function signatures
+     make error return value consistent with QEMU
+     avoid premature break during read
+     adhere to block graph lock requirements]
+Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
 ---
- block/alloc-track.c | 345 ++++++++++++++++++++++++++++++++++++++++++++
+ block/alloc-track.c | 366 ++++++++++++++++++++++++++++++++++++++++++++
  block/meson.build   |   1 +
- 2 files changed, 346 insertions(+)
+ block/stream.c      |  34 ++++
+ 3 files changed, 401 insertions(+)
  create mode 100644 block/alloc-track.c
 
 diff --git a/block/alloc-track.c b/block/alloc-track.c
 new file mode 100644
-index 0000000000..35f2737c89
+index 0000000000..b4a9851144
 --- /dev/null
 +++ b/block/alloc-track.c
-@@ -0,0 +1,345 @@
+@@ -0,0 +1,366 @@
 +/*
 + * Node to allow backing images to be applied to any node. Assumes a blank
 + * image to begin with, only new writes are tracked as allocated, thus this
@@ -50,9 +61,12 @@ index 0000000000..35f2737c89
 +#include "qemu/osdep.h"
 +#include "qapi/error.h"
 +#include "block/block_int.h"
++#include "block/dirty-bitmap.h"
++#include "block/graph-lock.h"
 +#include "qapi/qmp/qdict.h"
 +#include "qapi/qmp/qstring.h"
 +#include "qemu/cutils.h"
++#include "qemu/error-report.h"
 +#include "qemu/option.h"
 +#include "qemu/module.h"
 +#include "sysemu/block-backend.h"
@@ -61,12 +75,12 @@ index 0000000000..35f2737c89
 +
 +typedef enum DropState {
 +    DropNone,
-+    DropRequested,
 +    DropInProgress,
 +} DropState;
 +
 +typedef struct {
 +    BdrvDirtyBitmap *bitmap;
++    uint64_t granularity;
 +    DropState drop_state;
 +    bool auto_remove;
 +} BDRVAllocTrackState;
@@ -85,26 +99,29 @@ index 0000000000..35f2737c89
 +    },
 +};
 +
-+static void track_refresh_limits(BlockDriverState *bs, Error **errp)
++static void GRAPH_RDLOCK
++track_refresh_limits(BlockDriverState *bs, Error **errp)
 +{
-+    BlockDriverInfo bdi;
++    BDRVAllocTrackState *s = bs->opaque;
 +
 +    if (!bs->file) {
 +        return;
 +    }
 +
-+    /* always use alignment from underlying write device so RMW cycle for
-+     * bdrv_pwritev reads data from our backing via track_co_preadv (no partial
-+     * cluster allocation in 'file') */
-+    bdrv_get_info(bs->file->bs, &bdi);
++    /*
++     * Always use alignment from underlying write device so RMW cycle for
++     * bdrv_pwritev reads data from our backing via track_co_preadv. Also use at
++     * least the bitmap granularity.
++     */
 +    bs->bl.request_alignment = MAX(bs->file->bs->bl.request_alignment,
-+                                   MAX(bdi.cluster_size, BDRV_SECTOR_SIZE));
++                                   s->granularity);
 +}
 +
 +static int track_open(BlockDriverState *bs, QDict *options, int flags,
 +                      Error **errp)
 +{
 +    BDRVAllocTrackState *s = bs->opaque;
++    BdrvChild *file = NULL;
 +    QemuOpts *opts;
 +    Error *local_err = NULL;
 +    int ret = 0;
@@ -120,18 +137,45 @@ index 0000000000..35f2737c89
 +    s->auto_remove = qemu_opt_get_bool(opts, TRACK_OPT_AUTO_REMOVE, false);
 +
 +    /* open the target (write) node, backing will be attached by block layer */
-+    bs->file = bdrv_open_child(NULL, options, "file", bs, &child_of_bds,
-+                               BDRV_CHILD_DATA | BDRV_CHILD_METADATA, false,
-+                               &local_err);
++    file = bdrv_open_child(NULL, options, "file", bs, &child_of_bds,
++                           BDRV_CHILD_DATA | BDRV_CHILD_METADATA, false,
++                           &local_err);
++    bdrv_graph_wrlock();
++    bs->file = file;
++    bdrv_graph_wrunlock();
 +    if (local_err) {
 +        ret = -EINVAL;
 +        error_propagate(errp, local_err);
 +        goto fail;
 +    }
 +
++    bdrv_graph_rdlock_main_loop();
++    BlockDriverInfo bdi = {0};
++    ret = bdrv_get_info(bs->file->bs, &bdi);
++    if (ret < 0) {
++        /*
++         * Not a hard failure. Worst that can happen is partial cluster
++         * allocation in the write target. However, the driver here returns its
++         * allocation status based on the dirty bitmap, so any other data that
++         * maps to such a cluster will still be copied later by a stream job (or
++         * during writes to that cluster).
++         */
++        warn_report("alloc-track: unable to query cluster size for write target: %s",
++                    strerror(ret));
++    }
++    ret = 0;
++    /*
++     * Always consider alignment from underlying write device so RMW cycle for
++     * bdrv_pwritev reads data from our backing via track_co_preadv. Also try to
++     * avoid partial cluster allocation in the write target by considering the
++     * cluster size.
++     */
++    s->granularity = MAX(bs->file->bs->bl.request_alignment,
++                         MAX(bdi.cluster_size, BDRV_SECTOR_SIZE));
 +    track_refresh_limits(bs, errp);
-+    uint64_t gran = bs->bl.request_alignment;
-+    s->bitmap = bdrv_create_dirty_bitmap(bs->file->bs, gran, NULL, &local_err);
++    s->bitmap = bdrv_create_dirty_bitmap(bs->file->bs, s->granularity, NULL,
++                                         &local_err);
++    bdrv_graph_rdunlock_main_loop();
 +    if (local_err) {
 +        ret = -EIO;
 +        error_propagate(errp, local_err);
@@ -142,7 +186,9 @@ index 0000000000..35f2737c89
 +
 +fail:
 +    if (ret < 0) {
++        bdrv_graph_wrlock();
 +        bdrv_unref_child(bs, bs->file);
++        bdrv_graph_wrunlock();
 +        if (s->bitmap) {
 +            bdrv_release_dirty_bitmap(s->bitmap);
 +        }
@@ -159,13 +205,15 @@ index 0000000000..35f2737c89
 +    }
 +}
 +
-+static int64_t track_getlength(BlockDriverState *bs)
++static coroutine_fn int64_t GRAPH_RDLOCK
++track_co_getlength(BlockDriverState *bs)
 +{
-+    return bdrv_getlength(bs->file->bs);
++    return bdrv_co_getlength(bs->file->bs);
 +}
 +
-+static int coroutine_fn track_co_preadv(BlockDriverState *bs,
-+    uint64_t offset, uint64_t bytes, QEMUIOVector *qiov, int flags)
++static int coroutine_fn GRAPH_RDLOCK
++track_co_preadv(BlockDriverState *bs, int64_t offset, int64_t bytes,
++                QEMUIOVector *qiov, BdrvRequestFlags flags)
 +{
 +    BDRVAllocTrackState *s = bs->opaque;
 +    QEMUIOVector local_qiov;
@@ -176,6 +224,11 @@ index 0000000000..35f2737c89
 +    int64_t local_bytes;
 +    bool alloc;
 +
++    if (offset < 0 || bytes < 0) {
++        fprintf(stderr, "unexpected negative 'offset' or 'bytes' value!\n");
++        return -EIO;
++    }
++
 +    /* a read request can span multiple granularity-sized chunks, and can thus
 +     * contain blocks with different allocation status - we could just iterate
 +     * granularity-wise, but for better performance use bdrv_dirty_bitmap_next_X
@@ -206,7 +259,8 @@ index 0000000000..35f2737c89
 +            ret = bdrv_co_preadv(bs->backing, local_offset, local_bytes,
 +                                 &local_qiov, flags);
 +        } else {
-+            ret = qemu_iovec_memset(&local_qiov, cur_offset, 0, local_bytes);
++            qemu_iovec_memset(&local_qiov, cur_offset, 0, local_bytes);
++            ret = 0;
 +        }
 +
 +        if (ret != 0) {
@@ -217,36 +271,39 @@ index 0000000000..35f2737c89
 +    return ret;
 +}
 +
-+static int coroutine_fn track_co_pwritev(BlockDriverState *bs,
-+    uint64_t offset, uint64_t bytes, QEMUIOVector *qiov, int flags)
++static int coroutine_fn GRAPH_RDLOCK
++track_co_pwritev(BlockDriverState *bs, int64_t offset, int64_t bytes,
++                 QEMUIOVector *qiov, BdrvRequestFlags flags)
 +{
 +    return bdrv_co_pwritev(bs->file, offset, bytes, qiov, flags);
 +}
 +
-+static int coroutine_fn track_co_pwrite_zeroes(BlockDriverState *bs,
-+    int64_t offset, int count, BdrvRequestFlags flags)
++static int coroutine_fn GRAPH_RDLOCK
++track_co_pwrite_zeroes(BlockDriverState *bs, int64_t offset, int64_t bytes,
++                       BdrvRequestFlags flags)
 +{
-+    return bdrv_co_pwrite_zeroes(bs->file, offset, count, flags);
++    return bdrv_co_pwrite_zeroes(bs->file, offset, bytes, flags);
 +}
 +
-+static int coroutine_fn track_co_pdiscard(BlockDriverState *bs,
-+    int64_t offset, int count)
++static int coroutine_fn GRAPH_RDLOCK
++track_co_pdiscard(BlockDriverState *bs, int64_t offset, int64_t bytes)
 +{
-+    return bdrv_co_pdiscard(bs->file, offset, count);
++    return bdrv_co_pdiscard(bs->file, offset, bytes);
 +}
 +
-+static coroutine_fn int track_co_flush(BlockDriverState *bs)
++static coroutine_fn int GRAPH_RDLOCK
++track_co_flush(BlockDriverState *bs)
 +{
 +    return bdrv_co_flush(bs->file->bs);
 +}
 +
-+static int coroutine_fn track_co_block_status(BlockDriverState *bs,
-+                                              bool want_zero,
-+                                              int64_t offset,
-+                                              int64_t bytes,
-+                                              int64_t *pnum,
-+                                              int64_t *map,
-+                                              BlockDriverState **file)
++static int coroutine_fn GRAPH_RDLOCK
++track_co_block_status(BlockDriverState *bs, bool want_zero,
++                                            int64_t offset,
++                                            int64_t bytes,
++                                            int64_t *pnum,
++                                            int64_t *map,
++                                            BlockDriverState **file)
 +{
 +    BDRVAllocTrackState *s = bs->opaque;
 +
@@ -272,10 +329,10 @@ index 0000000000..35f2737c89
 +    return 0;
 +}
 +
-+static void track_child_perm(BlockDriverState *bs, BdrvChild *c,
-+                             BdrvChildRole role, BlockReopenQueue *reopen_queue,
-+                             uint64_t perm, uint64_t shared,
-+                             uint64_t *nperm, uint64_t *nshared)
++static void GRAPH_RDLOCK
++track_child_perm(BlockDriverState *bs, BdrvChild *c, BdrvChildRole role,
++                 BlockReopenQueue *reopen_queue, uint64_t perm, uint64_t shared,
++                 uint64_t *nperm, uint64_t *nshared)
 +{
 +    BDRVAllocTrackState *s = bs->opaque;
 +
@@ -298,53 +355,28 @@ index 0000000000..35f2737c89
 +    }
 +}
 +
-+static void track_drop(void *opaque)
++static int coroutine_fn GRAPH_RDLOCK
++track_co_change_backing_file(BlockDriverState *bs, const char *backing_file,
++                             const char *backing_fmt)
 +{
-+    BlockDriverState *bs = (BlockDriverState*)opaque;
-+    BlockDriverState *file = bs->file->bs;
-+    BDRVAllocTrackState *s = bs->opaque;
-+
-+    assert(file);
-+
-+    /* we rely on the fact that we're not used anywhere else, so let's wait
-+     * until we're only used once - in the drive connected to the guest (and one
-+     * ref is held by bdrv_ref in track_change_backing_file) */
-+    if (bs->refcnt > 2) {
-+        aio_bh_schedule_oneshot(qemu_get_aio_context(), track_drop, opaque);
-+        return;
-+    }
-+    AioContext *aio_context = bdrv_get_aio_context(bs);
-+    aio_context_acquire(aio_context);
-+
-+    bdrv_drained_begin(bs);
-+
-+    /* now that we're drained, we can safely set 'DropInProgress' */
-+    s->drop_state = DropInProgress;
-+    bdrv_child_refresh_perms(bs, bs->file, &error_abort);
-+
-+    bdrv_replace_node(bs, file, &error_abort);
-+    bdrv_set_backing_hd(bs, NULL, &error_abort);
-+    bdrv_drained_end(bs);
-+    bdrv_unref(bs);
-+    aio_context_release(aio_context);
-+}
-+
-+static int track_change_backing_file(BlockDriverState *bs,
-+                                     const char *backing_file,
-+                                     const char *backing_fmt)
-+{
-+    BDRVAllocTrackState *s = bs->opaque;
-+    if (s->auto_remove && s->drop_state == DropNone &&
-+        backing_file == NULL && backing_fmt == NULL)
-+    {
-+        /* backing file has been disconnected, there's no longer any use for
-+         * this node, so let's remove ourselves from the block graph - we need
-+         * to schedule this for later however, since when this function is
-+         * called, the blockjob modifying us is probably not done yet and has a
-+         * blocker on 'bs' */
-+        s->drop_state = DropRequested;
-+        bdrv_ref(bs);
-+        aio_bh_schedule_oneshot(qemu_get_aio_context(), track_drop, (void*)bs);
++    /*
++     * Note that the actual backing file graph change is already done in the
++     * stream job itself with bdrv_set_backing_hd_drained(), so no need to
++     * actually do anything here. But still needs to be implemented, to make
++     * our caller (i.e. bdrv_co_change_backing_file() do the right thing).
++     *
++     * FIXME
++     * We'd like to auto-remove ourselves from the block graph, but it cannot
++     * be done from a coroutine. Currently done in the stream job, where it
++     * kinda fits better, but in the long-term, a special parameter would be
++     * nice (or done via qemu-server via upcoming blockdev-replace QMP command).
++     */
++    if (backing_file == NULL) {
++        BDRVAllocTrackState *s = bs->opaque;
++        bdrv_drained_begin(bs);
++        s->drop_state = DropInProgress;
++        bdrv_child_refresh_perms(bs, bs->file, &error_abort);
++        bdrv_drained_end(bs);
 +    }
 +
 +    return 0;
@@ -354,9 +386,9 @@ index 0000000000..35f2737c89
 +    .format_name                      = "alloc-track",
 +    .instance_size                    = sizeof(BDRVAllocTrackState),
 +
-+    .bdrv_file_open                   = track_open,
++    .bdrv_open                        = track_open,
 +    .bdrv_close                       = track_close,
-+    .bdrv_getlength                   = track_getlength,
++    .bdrv_co_getlength                = track_co_getlength,
 +    .bdrv_child_perm                  = track_child_perm,
 +    .bdrv_refresh_limits              = track_refresh_limits,
 +
@@ -371,7 +403,7 @@ index 0000000000..35f2737c89
 +    .supports_backing                 = true,
 +
 +    .bdrv_co_block_status             = track_co_block_status,
-+    .bdrv_change_backing_file         = track_change_backing_file,
++    .bdrv_co_change_backing_file      = track_co_change_backing_file,
 +};
 +
 +static void bdrv_alloc_track_init(void)
@@ -381,7 +413,7 @@ index 0000000000..35f2737c89
 +
 +block_init(bdrv_alloc_track_init);
 diff --git a/block/meson.build b/block/meson.build
-index e3ed5ac97c..d1ee260048 100644
+index e178047ec9..7ef7250d31 100644
 --- a/block/meson.build
 +++ b/block/meson.build
 @@ -2,6 +2,7 @@ block_ss.add(genh)
@@ -392,3 +424,48 @@ index e3ed5ac97c..d1ee260048 100644
    'amend.c',
    'backup.c',
    'backup-dump.c',
+diff --git a/block/stream.c b/block/stream.c
+index d2da83ae7c..f941cba14e 100644
+--- a/block/stream.c
++++ b/block/stream.c
+@@ -120,6 +120,40 @@ static int stream_prepare(Job *job)
+             ret = -EPERM;
+             goto out;
+         }
++
++        /*
++         * This cannot be done in the co_change_backing_file callback, because
++         * bdrv_replace_node() cannot be done in a coroutine. The latter also
++         * requires the graph lock exclusively. Only required for the
++         * alloc-track driver.
++         *
++         * The long-term plan is to either have an explicit parameter for the
++         * stream job or use the upcoming blockdev-replace QMP command.
++         */
++        if (base_id == NULL && strcmp(unfiltered_bs->drv->format_name, "alloc-track") == 0) {
++            BlockDriverState *file_bs;
++
++            bdrv_graph_rdlock_main_loop();
++            file_bs = unfiltered_bs->file->bs;
++            bdrv_graph_rdunlock_main_loop();
++
++            bdrv_ref(unfiltered_bs); // unrefed by bdrv_replace_node()
++            bdrv_drained_begin(file_bs);
++            bdrv_graph_wrlock();
++
++            bdrv_replace_node(unfiltered_bs, file_bs, &local_err);
++
++            bdrv_graph_wrunlock();
++            bdrv_drained_end(file_bs);
++            bdrv_unref(unfiltered_bs);
++
++            if (local_err) {
++                error_prepend(&local_err, "failed to replace alloc-track node: ");
++                error_report_err(local_err);
++                ret = -EPERM;
++                goto out;
++            }
++        }
+     }
+ 
+ out:

debian/patches/pve/0039-Revert-block-rbd-workaround-for-ceph-issue-53784.patch

@@ -0,0 +1,81 @@
+From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
+From: Fabian Ebner <f.ebner@proxmox.com>
+Date: Thu, 23 Jun 2022 14:00:05 +0200
+Subject: [PATCH] Revert "block/rbd: workaround for ceph issue #53784"
+
+This reverts commit fc176116cdea816ceb8dd969080b2b95f58edbc0 in
+preparation to revert 0347a8fd4c3faaedf119be04c197804be40a384b.
+
+Signed-off-by: Fabian Ebner <f.ebner@proxmox.com>
+Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
+---
+ block/rbd.c | 42 ++----------------------------------------
+ 1 file changed, 2 insertions(+), 40 deletions(-)
+
+diff --git a/block/rbd.c b/block/rbd.c
+index 101ee59d6e..4ad3b1a7b1 100644
+--- a/block/rbd.c
++++ b/block/rbd.c
+@@ -1515,7 +1515,6 @@ static int coroutine_fn qemu_rbd_co_block_status(BlockDriverState *bs,
+     int status, r;
+     RBDDiffIterateReq req = { .offs = offset };
+     uint64_t features, flags;
+-    uint64_t head = 0;
+ 
+     assert(offset + bytes <= s->image_size);
+ 
+@@ -1543,43 +1542,7 @@ static int coroutine_fn qemu_rbd_co_block_status(BlockDriverState *bs,
+         return status;
+     }
+ 
+-#if LIBRBD_VERSION_CODE < LIBRBD_VERSION(1, 17, 0)
+-    /*
+-     * librbd had a bug until early 2022 that affected all versions of ceph that
+-     * supported fast-diff. This bug results in reporting of incorrect offsets
+-     * if the offset parameter to rbd_diff_iterate2 is not object aligned.
+-     * Work around this bug by rounding down the offset to object boundaries.
+-     * This is OK because we call rbd_diff_iterate2 with whole_object = true.
+-     * However, this workaround only works for non cloned images with default
+-     * striping.
+-     *
+-     * See: https://tracker.ceph.com/issues/53784
+-     */
+-
+-    /* check if RBD image has non-default striping enabled */
+-    if (features & RBD_FEATURE_STRIPINGV2) {
+-        return status;
+-    }
+-
+-#pragma GCC diagnostic push
+-#pragma GCC diagnostic ignored "-Wdeprecated-declarations"
+-    /*
+-     * check if RBD image is a clone (= has a parent).
+-     *
+-     * rbd_get_parent_info is deprecated from Nautilus onwards, but the
+-     * replacement rbd_get_parent is not present in Luminous and Mimic.
+-     */
+-    if (rbd_get_parent_info(s->image, NULL, 0, NULL, 0, NULL, 0) != -ENOENT) {
+-        return status;
+-    }
+-#pragma GCC diagnostic pop
+-
+-    head = req.offs & (s->object_size - 1);
+-    req.offs -= head;
+-    bytes += head;
+-#endif
+-
+-    r = rbd_diff_iterate2(s->image, NULL, req.offs, bytes, true, true,
++    r = rbd_diff_iterate2(s->image, NULL, offset, bytes, true, true,
+                           qemu_rbd_diff_iterate_cb, &req);
+     if (r < 0 && r != QEMU_RBD_EXIT_DIFF_ITERATE2) {
+         return status;
+@@ -1598,8 +1561,7 @@ static int coroutine_fn qemu_rbd_co_block_status(BlockDriverState *bs,
+         status = BDRV_BLOCK_ZERO | BDRV_BLOCK_OFFSET_VALID;
+     }
+ 
+-    assert(req.bytes > head);
+-    *pnum = req.bytes - head;
++    *pnum = req.bytes;
+     return status;
+ }
+ 

debian/patches/pve/0040-Revert-block-rbd-fix-handling-of-holes-in-.bdrv_co_b.patch

@@ -0,0 +1,36 @@
+From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
+From: Fabian Ebner <f.ebner@proxmox.com>
+Date: Thu, 23 Jun 2022 14:00:07 +0200
+Subject: [PATCH] Revert "block/rbd: fix handling of holes in
+ .bdrv_co_block_status"
+
+This reverts commit 9e302f64bb407a9bb097b626da97228c2654cfee in
+preparation to revert 0347a8fd4c3faaedf119be04c197804be40a384b.
+
+Signed-off-by: Fabian Ebner <f.ebner@proxmox.com>
+Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
+---
+ block/rbd.c | 10 +++++-----
+ 1 file changed, 5 insertions(+), 5 deletions(-)
+
+diff --git a/block/rbd.c b/block/rbd.c
+index 4ad3b1a7b1..e341745255 100644
+--- a/block/rbd.c
++++ b/block/rbd.c
+@@ -1474,11 +1474,11 @@ static int qemu_rbd_diff_iterate_cb(uint64_t offs, size_t len,
+     RBDDiffIterateReq *req = opaque;
+ 
+     assert(req->offs + req->bytes <= offs);
+-
+-    /* treat a hole like an unallocated area and bail out */
+-    if (!exists) {
+-        return 0;
+-    }
++    /*
++     * we do not diff against a snapshot so we should never receive a callback
++     * for a hole.
++     */
++    assert(exists);
+ 
+     if (!req->exists && offs > req->offs) {
+         /*

debian/patches/pve/0041-PVE-Use-coroutine-QMP-for-backup-cancel_backup.patch

@@ -1,597 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Stefan Reiter <s.reiter@proxmox.com>
-Date: Tue, 26 Jan 2021 15:45:30 +0100
-Subject: [PATCH] PVE: Use coroutine QMP for backup/cancel_backup
-
-Finally turn backup QMP calls into coroutines, now that it's possible.
-This has the benefit that calls are asynchronous to the main loop, i.e.
-long running operations like connecting to a PBS server will no longer
-hang the VM.
-
-Additionally, it allows us to get rid of block_on_coroutine_fn, which
-was always a hacky workaround.
-
-While we're already spring cleaning, also remove the QmpBackupTask
-struct, since we can now put the 'prepare' function directly into
-qmp_backup and thus no longer need those giant walls of text.
-
-(Note that for our patches to work with 5.2.0 this change is actually
-required, otherwise monitor_get_fd() fails as we're not in a QMP
-coroutine, but one we start ourselves - we could of course set the
-monitor for that coroutine ourselves, but let's just fix it the right
-way instead)
-
-Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
----
- block/monitor/block-hmp-cmds.c |   4 +-
- hmp-commands.hx                |   2 +
- proxmox-backup-client.c        |  31 -----
- pve-backup.c                   | 232 ++++++++++-----------------------
- qapi/block-core.json           |   4 +-
- 5 files changed, 77 insertions(+), 196 deletions(-)
-
-diff --git a/block/monitor/block-hmp-cmds.c b/block/monitor/block-hmp-cmds.c
-index 69254396d5..b838586fc0 100644
---- a/block/monitor/block-hmp-cmds.c
-+++ b/block/monitor/block-hmp-cmds.c
-@@ -1016,7 +1016,7 @@ void hmp_info_snapshots(Monitor *mon, const QDict *qdict)
-     g_free(global_snapshots);
- }
- 
--void hmp_backup_cancel(Monitor *mon, const QDict *qdict)
-+void coroutine_fn hmp_backup_cancel(Monitor *mon, const QDict *qdict)
- {
-     Error *error = NULL;
- 
-@@ -1025,7 +1025,7 @@ void hmp_backup_cancel(Monitor *mon, const QDict *qdict)
-     hmp_handle_error(mon, error);
- }
- 
--void hmp_backup(Monitor *mon, const QDict *qdict)
-+void coroutine_fn hmp_backup(Monitor *mon, const QDict *qdict)
- {
-     Error *error = NULL;
- 
-diff --git a/hmp-commands.hx b/hmp-commands.hx
-index b18063ce19..02c8f83ca3 100644
---- a/hmp-commands.hx
-+++ b/hmp-commands.hx
-@@ -109,6 +109,7 @@ ERST
- 		    "\n\t\t\t Use -d to dump data into a directory instead"
- 		    "\n\t\t\t of using VMA format.",
-         .cmd = hmp_backup,
-+        .coroutine  = true,
-     },
- 
- SRST
-@@ -122,6 +123,7 @@ ERST
-         .params     = "",
-         .help       = "cancel the current VM backup",
-         .cmd        = hmp_backup_cancel,
-+        .coroutine  = true,
-     },
- 
- SRST
-diff --git a/proxmox-backup-client.c b/proxmox-backup-client.c
-index 4ce7bc0b5e..0923037dec 100644
---- a/proxmox-backup-client.c
-+++ b/proxmox-backup-client.c
-@@ -5,37 +5,6 @@
- 
- /* Proxmox Backup Server client bindings using coroutines */
- 
--typedef struct BlockOnCoroutineWrapper {
--    AioContext *ctx;
--    CoroutineEntry *entry;
--    void *entry_arg;
--    bool finished;
--} BlockOnCoroutineWrapper;
--
--static void coroutine_fn block_on_coroutine_wrapper(void *opaque)
--{
--    BlockOnCoroutineWrapper *wrapper = opaque;
--    wrapper->entry(wrapper->entry_arg);
--    wrapper->finished = true;
--    aio_wait_kick();
--}
--
--void block_on_coroutine_fn(CoroutineEntry *entry, void *entry_arg)
--{
--    assert(!qemu_in_coroutine());
--
--    AioContext *ctx = qemu_get_current_aio_context();
--    BlockOnCoroutineWrapper wrapper = {
--        .finished = false,
--        .entry = entry,
--        .entry_arg = entry_arg,
--        .ctx = ctx,
--    };
--    Coroutine *wrapper_co = qemu_coroutine_create(block_on_coroutine_wrapper, &wrapper);
--    aio_co_enter(ctx, wrapper_co);
--    AIO_WAIT_WHILE(ctx, !wrapper.finished);
--}
--
- // This is called from another thread, so we use aio_co_schedule()
- static void proxmox_backup_schedule_wake(void *data) {
-     CoCtxData *waker = (CoCtxData *)data;
-diff --git a/pve-backup.c b/pve-backup.c
-index 59ccb38ceb..f858003a06 100644
---- a/pve-backup.c
-+++ b/pve-backup.c
-@@ -357,7 +357,7 @@ static void job_cancel_bh(void *opaque) {
-     aio_co_enter(data->ctx, data->co);
- }
- 
--static void coroutine_fn pvebackup_co_cancel(void *opaque)
-+void coroutine_fn qmp_backup_cancel(Error **errp)
- {
-     Error *cancel_err = NULL;
-     error_setg(&cancel_err, "backup canceled");
-@@ -394,11 +394,6 @@ static void coroutine_fn pvebackup_co_cancel(void *opaque)
-     qemu_co_mutex_unlock(&backup_state.backup_mutex);
- }
- 
--void qmp_backup_cancel(Error **errp)
--{
--    block_on_coroutine_fn(pvebackup_co_cancel, NULL);
--}
--
- // assumes the caller holds backup_mutex
- static int coroutine_fn pvebackup_co_add_config(
-     const char *file,
-@@ -533,50 +528,27 @@ static void create_backup_jobs_bh(void *opaque) {
-     aio_co_enter(data->ctx, data->co);
- }
- 
--typedef struct QmpBackupTask {
--    const char *backup_file;
--    bool has_password;
--    const char *password;
--    bool has_keyfile;
--    const char *keyfile;
--    bool has_key_password;
--    const char *key_password;
--    bool has_backup_id;
--    const char *backup_id;
--    bool has_backup_time;
--    const char *fingerprint;
--    bool has_fingerprint;
--    int64_t backup_time;
--    bool has_use_dirty_bitmap;
--    bool use_dirty_bitmap;
--    bool has_format;
--    BackupFormat format;
--    bool has_config_file;
--    const char *config_file;
--    bool has_firewall_file;
--    const char *firewall_file;
--    bool has_devlist;
--    const char *devlist;
--    bool has_compress;
--    bool compress;
--    bool has_encrypt;
--    bool encrypt;
--    bool has_speed;
--    int64_t speed;
--    Error **errp;
--    UuidInfo *result;
--} QmpBackupTask;
--
--static void coroutine_fn pvebackup_co_prepare(void *opaque)
-+UuidInfo coroutine_fn *qmp_backup(
-+    const char *backup_file,
-+    bool has_password, const char *password,
-+    bool has_keyfile, const char *keyfile,
-+    bool has_key_password, const char *key_password,
-+    bool has_fingerprint, const char *fingerprint,
-+    bool has_backup_id, const char *backup_id,
-+    bool has_backup_time, int64_t backup_time,
-+    bool has_use_dirty_bitmap, bool use_dirty_bitmap,
-+    bool has_compress, bool compress,
-+    bool has_encrypt, bool encrypt,
-+    bool has_format, BackupFormat format,
-+    bool has_config_file, const char *config_file,
-+    bool has_firewall_file, const char *firewall_file,
-+    bool has_devlist, const char *devlist,
-+    bool has_speed, int64_t speed, Error **errp)
- {
-     assert(qemu_in_coroutine());
- 
-     qemu_co_mutex_lock(&backup_state.backup_mutex);
- 
--    QmpBackupTask *task = opaque;
--
--    task->result = NULL; // just to be sure
--
-     BlockBackend *blk;
-     BlockDriverState *bs = NULL;
-     const char *backup_dir = NULL;
-@@ -593,17 +565,17 @@ static void coroutine_fn pvebackup_co_prepare(void *opaque)
-     const char *firewall_name = "qemu-server.fw";
- 
-     if (backup_state.di_list) {
--        error_set(task->errp, ERROR_CLASS_GENERIC_ERROR,
-+        error_set(errp, ERROR_CLASS_GENERIC_ERROR,
-                   "previous backup not finished");
-         qemu_co_mutex_unlock(&backup_state.backup_mutex);
--        return;
-+        return NULL;
-     }
- 
-     /* Todo: try to auto-detect format based on file name */
--    BackupFormat format = task->has_format ? task->format : BACKUP_FORMAT_VMA;
-+    format = has_format ? format : BACKUP_FORMAT_VMA;
- 
--    if (task->has_devlist) {
--        devs = g_strsplit_set(task->devlist, ",;:", -1);
-+    if (has_devlist) {
-+        devs = g_strsplit_set(devlist, ",;:", -1);
- 
-         gchar **d = devs;
-         while (d && *d) {
-@@ -611,14 +583,14 @@ static void coroutine_fn pvebackup_co_prepare(void *opaque)
-             if (blk) {
-                 bs = blk_bs(blk);
-                 if (!bdrv_is_inserted(bs)) {
--                    error_setg(task->errp, QERR_DEVICE_HAS_NO_MEDIUM, *d);
-+                    error_setg(errp, QERR_DEVICE_HAS_NO_MEDIUM, *d);
-                     goto err;
-                 }
-                 PVEBackupDevInfo *di = g_new0(PVEBackupDevInfo, 1);
-                 di->bs = bs;
-                 di_list = g_list_append(di_list, di);
-             } else {
--                error_set(task->errp, ERROR_CLASS_DEVICE_NOT_FOUND,
-+                error_set(errp, ERROR_CLASS_DEVICE_NOT_FOUND,
-                           "Device '%s' not found", *d);
-                 goto err;
-             }
-@@ -641,7 +613,7 @@ static void coroutine_fn pvebackup_co_prepare(void *opaque)
-     }
- 
-     if (!di_list) {
--        error_set(task->errp, ERROR_CLASS_GENERIC_ERROR, "empty device list");
-+        error_set(errp, ERROR_CLASS_GENERIC_ERROR, "empty device list");
-         goto err;
-     }
- 
-@@ -651,13 +623,13 @@ static void coroutine_fn pvebackup_co_prepare(void *opaque)
-     while (l) {
-         PVEBackupDevInfo *di = (PVEBackupDevInfo *)l->data;
-         l = g_list_next(l);
--        if (bdrv_op_is_blocked(di->bs, BLOCK_OP_TYPE_BACKUP_SOURCE, task->errp)) {
-+        if (bdrv_op_is_blocked(di->bs, BLOCK_OP_TYPE_BACKUP_SOURCE, errp)) {
-             goto err;
-         }
- 
-         ssize_t size = bdrv_getlength(di->bs);
-         if (size < 0) {
--            error_setg_errno(task->errp, -di->size, "bdrv_getlength failed");
-+            error_setg_errno(errp, -di->size, "bdrv_getlength failed");
-             goto err;
-         }
-         di->size = size;
-@@ -684,47 +656,44 @@ static void coroutine_fn pvebackup_co_prepare(void *opaque)
-     }
- 
-     if (format == BACKUP_FORMAT_PBS) {
--        if (!task->has_password) {
--            error_set(task->errp, ERROR_CLASS_GENERIC_ERROR, "missing parameter 'password'");
-+        if (!has_password) {
-+            error_set(errp, ERROR_CLASS_GENERIC_ERROR, "missing parameter 'password'");
-             goto err_mutex;
-         }
--        if (!task->has_backup_id) {
--            error_set(task->errp, ERROR_CLASS_GENERIC_ERROR, "missing parameter 'backup-id'");
-+        if (!has_backup_id) {
-+            error_set(errp, ERROR_CLASS_GENERIC_ERROR, "missing parameter 'backup-id'");
-             goto err_mutex;
-         }
--        if (!task->has_backup_time) {
--            error_set(task->errp, ERROR_CLASS_GENERIC_ERROR, "missing parameter 'backup-time'");
-+        if (!has_backup_time) {
-+            error_set(errp, ERROR_CLASS_GENERIC_ERROR, "missing parameter 'backup-time'");
-             goto err_mutex;
-         }
- 
-         int dump_cb_block_size = PROXMOX_BACKUP_DEFAULT_CHUNK_SIZE; // Hardcoded (4M)
-         firewall_name = "fw.conf";
- 
--        bool use_dirty_bitmap = task->has_use_dirty_bitmap && task->use_dirty_bitmap;
--
--
-         char *pbs_err = NULL;
-         pbs = proxmox_backup_new(
--            task->backup_file,
--            task->backup_id,
--            task->backup_time,
-+            backup_file,
-+            backup_id,
-+            backup_time,
-             dump_cb_block_size,
--            task->has_password ? task->password : NULL,
--            task->has_keyfile ? task->keyfile : NULL,
--            task->has_key_password ? task->key_password : NULL,
--            task->has_compress ? task->compress : true,
--            task->has_encrypt ? task->encrypt : task->has_keyfile,
--            task->has_fingerprint ? task->fingerprint : NULL,
-+            has_password ? password : NULL,
-+            has_keyfile ? keyfile : NULL,
-+            has_key_password ? key_password : NULL,
-+            has_compress ? compress : true,
-+            has_encrypt ? encrypt : has_keyfile,
-+            has_fingerprint ? fingerprint : NULL,
-              &pbs_err);
- 
-         if (!pbs) {
--            error_set(task->errp, ERROR_CLASS_GENERIC_ERROR,
-+            error_set(errp, ERROR_CLASS_GENERIC_ERROR,
-                       "proxmox_backup_new failed: %s", pbs_err);
-             proxmox_backup_free_error(pbs_err);
-             goto err_mutex;
-         }
- 
--        int connect_result = proxmox_backup_co_connect(pbs, task->errp);
-+        int connect_result = proxmox_backup_co_connect(pbs, errp);
-         if (connect_result < 0)
-             goto err_mutex;
- 
-@@ -743,9 +712,9 @@ static void coroutine_fn pvebackup_co_prepare(void *opaque)
-             BdrvDirtyBitmap *bitmap = bdrv_find_dirty_bitmap(di->bs, PBS_BITMAP_NAME);
-             bool expect_only_dirty = false;
- 
--            if (use_dirty_bitmap) {
-+            if (has_use_dirty_bitmap && use_dirty_bitmap) {
-                 if (bitmap == NULL) {
--                    bitmap = bdrv_create_dirty_bitmap(di->bs, dump_cb_block_size, PBS_BITMAP_NAME, task->errp);
-+                    bitmap = bdrv_create_dirty_bitmap(di->bs, dump_cb_block_size, PBS_BITMAP_NAME, errp);
-                     if (!bitmap) {
-                         goto err_mutex;
-                     }
-@@ -775,12 +744,12 @@ static void coroutine_fn pvebackup_co_prepare(void *opaque)
-                 }
-             }
- 
--            int dev_id = proxmox_backup_co_register_image(pbs, devname, di->size, expect_only_dirty, task->errp);
-+            int dev_id = proxmox_backup_co_register_image(pbs, devname, di->size, expect_only_dirty, errp);
-             if (dev_id < 0) {
-                 goto err_mutex;
-             }
- 
--            if (!(di->target = bdrv_backup_dump_create(dump_cb_block_size, di->size, pvebackup_co_dump_pbs_cb, di, task->errp))) {
-+            if (!(di->target = bdrv_backup_dump_create(dump_cb_block_size, di->size, pvebackup_co_dump_pbs_cb, di, errp))) {
-                 goto err_mutex;
-             }
- 
-@@ -794,10 +763,10 @@ static void coroutine_fn pvebackup_co_prepare(void *opaque)
-             backup_state.stat.bitmap_list = g_list_append(backup_state.stat.bitmap_list, info);
-         }
-     } else if (format == BACKUP_FORMAT_VMA) {
--        vmaw = vma_writer_create(task->backup_file, uuid, &local_err);
-+        vmaw = vma_writer_create(backup_file, uuid, &local_err);
-         if (!vmaw) {
-             if (local_err) {
--                error_propagate(task->errp, local_err);
-+                error_propagate(errp, local_err);
-             }
-             goto err_mutex;
-         }
-@@ -808,25 +777,25 @@ static void coroutine_fn pvebackup_co_prepare(void *opaque)
-             PVEBackupDevInfo *di = (PVEBackupDevInfo *)l->data;
-             l = g_list_next(l);
- 
--            if (!(di->target = bdrv_backup_dump_create(VMA_CLUSTER_SIZE, di->size, pvebackup_co_dump_vma_cb, di, task->errp))) {
-+            if (!(di->target = bdrv_backup_dump_create(VMA_CLUSTER_SIZE, di->size, pvebackup_co_dump_vma_cb, di, errp))) {
-                 goto err_mutex;
-             }
- 
-             const char *devname = bdrv_get_device_name(di->bs);
-             di->dev_id = vma_writer_register_stream(vmaw, devname, di->size);
-             if (di->dev_id <= 0) {
--                error_set(task->errp, ERROR_CLASS_GENERIC_ERROR,
-+                error_set(errp, ERROR_CLASS_GENERIC_ERROR,
-                           "register_stream failed");
-                 goto err_mutex;
-             }
-         }
-     } else if (format == BACKUP_FORMAT_DIR) {
--        if (mkdir(task->backup_file, 0640) != 0) {
--            error_setg_errno(task->errp, errno, "can't create directory '%s'\n",
--                             task->backup_file);
-+        if (mkdir(backup_file, 0640) != 0) {
-+            error_setg_errno(errp, errno, "can't create directory '%s'\n",
-+                             backup_file);
-             goto err_mutex;
-         }
--        backup_dir = task->backup_file;
-+        backup_dir = backup_file;
- 
-         l = di_list;
-         while (l) {
-@@ -840,34 +809,34 @@ static void coroutine_fn pvebackup_co_prepare(void *opaque)
-             bdrv_img_create(di->targetfile, "raw", NULL, NULL, NULL,
-                             di->size, flags, false, &local_err);
-             if (local_err) {
--                error_propagate(task->errp, local_err);
-+                error_propagate(errp, local_err);
-                 goto err_mutex;
-             }
- 
-             di->target = bdrv_open(di->targetfile, NULL, NULL, flags, &local_err);
-             if (!di->target) {
--                error_propagate(task->errp, local_err);
-+                error_propagate(errp, local_err);
-                 goto err_mutex;
-             }
-         }
-     } else {
--        error_set(task->errp, ERROR_CLASS_GENERIC_ERROR, "unknown backup format");
-+        error_set(errp, ERROR_CLASS_GENERIC_ERROR, "unknown backup format");
-         goto err_mutex;
-     }
- 
- 
-     /* add configuration file to archive */
--    if (task->has_config_file) {
--        if (pvebackup_co_add_config(task->config_file, config_name, format, backup_dir,
--                                    vmaw, pbs, task->errp) != 0) {
-+    if (has_config_file) {
-+        if (pvebackup_co_add_config(config_file, config_name, format, backup_dir,
-+                                    vmaw, pbs, errp) != 0) {
-             goto err_mutex;
-         }
-     }
- 
-     /* add firewall file to archive */
--    if (task->has_firewall_file) {
--        if (pvebackup_co_add_config(task->firewall_file, firewall_name, format, backup_dir,
--                                    vmaw, pbs, task->errp) != 0) {
-+    if (has_firewall_file) {
-+        if (pvebackup_co_add_config(firewall_file, firewall_name, format, backup_dir,
-+                                    vmaw, pbs, errp) != 0) {
-             goto err_mutex;
-         }
-     }
-@@ -885,7 +854,7 @@ static void coroutine_fn pvebackup_co_prepare(void *opaque)
-     if (backup_state.stat.backup_file) {
-         g_free(backup_state.stat.backup_file);
-     }
--    backup_state.stat.backup_file = g_strdup(task->backup_file);
-+    backup_state.stat.backup_file = g_strdup(backup_file);
- 
-     uuid_copy(backup_state.stat.uuid, uuid);
-     uuid_unparse_lower(uuid, backup_state.stat.uuid_str);
-@@ -900,7 +869,7 @@ static void coroutine_fn pvebackup_co_prepare(void *opaque)
- 
-     qemu_mutex_unlock(&backup_state.stat.lock);
- 
--    backup_state.speed = (task->has_speed && task->speed > 0) ? task->speed : 0;
-+    backup_state.speed = (has_speed && speed > 0) ? speed : 0;
- 
-     backup_state.vmaw = vmaw;
-     backup_state.pbs = pbs;
-@@ -910,8 +879,6 @@ static void coroutine_fn pvebackup_co_prepare(void *opaque)
-     uuid_info = g_malloc0(sizeof(*uuid_info));
-     uuid_info->UUID = uuid_str;
- 
--    task->result = uuid_info;
--
-     /* Run create_backup_jobs_bh outside of coroutine (in BH) but keep
-     * backup_mutex locked. This is fine, a CoMutex can be held across yield
-     * points, and we'll release it as soon as the BH reschedules us.
-@@ -925,7 +892,7 @@ static void coroutine_fn pvebackup_co_prepare(void *opaque)
-     qemu_coroutine_yield();
- 
-     if (local_err) {
--        error_propagate(task->errp, local_err);
-+        error_propagate(errp, local_err);
-         goto err;
-     }
- 
-@@ -938,7 +905,7 @@ static void coroutine_fn pvebackup_co_prepare(void *opaque)
-     /* start the first job in the transaction */
-     job_txn_start_seq(backup_state.txn);
- 
--    return;
-+    return uuid_info;
- 
- err_mutex:
-     qemu_mutex_unlock(&backup_state.stat.lock);
-@@ -969,7 +936,7 @@ err:
-     if (vmaw) {
-         Error *err = NULL;
-         vma_writer_close(vmaw, &err);
--        unlink(task->backup_file);
-+        unlink(backup_file);
-     }
- 
-     if (pbs) {
-@@ -980,65 +947,8 @@ err:
-         rmdir(backup_dir);
-     }
- 
--    task->result = NULL;
--
-     qemu_co_mutex_unlock(&backup_state.backup_mutex);
--    return;
--}
--
--UuidInfo *qmp_backup(
--    const char *backup_file,
--    bool has_password, const char *password,
--    bool has_keyfile, const char *keyfile,
--    bool has_key_password, const char *key_password,
--    bool has_fingerprint, const char *fingerprint,
--    bool has_backup_id, const char *backup_id,
--    bool has_backup_time, int64_t backup_time,
--    bool has_use_dirty_bitmap, bool use_dirty_bitmap,
--    bool has_compress, bool compress,
--    bool has_encrypt, bool encrypt,
--    bool has_format, BackupFormat format,
--    bool has_config_file, const char *config_file,
--    bool has_firewall_file, const char *firewall_file,
--    bool has_devlist, const char *devlist,
--    bool has_speed, int64_t speed, Error **errp)
--{
--    QmpBackupTask task = {
--        .backup_file = backup_file,
--        .has_password = has_password,
--        .password = password,
--        .has_keyfile = has_keyfile,
--        .keyfile = keyfile,
--        .has_key_password = has_key_password,
--        .key_password = key_password,
--        .has_fingerprint = has_fingerprint,
--        .fingerprint = fingerprint,
--        .has_backup_id = has_backup_id,
--        .backup_id = backup_id,
--        .has_backup_time = has_backup_time,
--        .backup_time = backup_time,
--        .has_use_dirty_bitmap = has_use_dirty_bitmap,
--        .use_dirty_bitmap = use_dirty_bitmap,
--        .has_compress = has_compress,
--        .compress = compress,
--        .has_encrypt = has_encrypt,
--        .encrypt = encrypt,
--        .has_format = has_format,
--        .format = format,
--        .has_config_file = has_config_file,
--        .config_file = config_file,
--        .has_firewall_file = has_firewall_file,
--        .firewall_file = firewall_file,
--        .has_devlist = has_devlist,
--        .devlist = devlist,
--        .has_speed = has_speed,
--        .speed = speed,
--        .errp = errp,
--    };
--
--    block_on_coroutine_fn(pvebackup_co_prepare, &task);
--
--    return task.result;
-+    return NULL;
- }
- 
- BackupStatus *qmp_query_backup(Error **errp)
-diff --git a/qapi/block-core.json b/qapi/block-core.json
-index e5de769dc1..afa67c28d2 100644
---- a/qapi/block-core.json
-+++ b/qapi/block-core.json
-@@ -801,7 +801,7 @@
-                                     '*config-file': 'str',
-                                     '*firewall-file': 'str',
-                                     '*devlist': 'str', '*speed': 'int' },
--  'returns': 'UuidInfo' }
-+  'returns': 'UuidInfo', 'coroutine': true }
- 
- ##
- # @query-backup:
-@@ -823,7 +823,7 @@
- # Notes: This command succeeds even if there is no backup process running.
- #
- ##
--{ 'command': 'backup-cancel' }
-+{ 'command': 'backup-cancel', 'coroutine': true }
- 
- ##
- # @ProxmoxSupportStatus:

debian/patches/pve/0041-Revert-block-rbd-implement-bdrv_co_block_status.patch

@@ -0,0 +1,162 @@
+From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
+From: Fabian Ebner <f.ebner@proxmox.com>
+Date: Tue, 17 May 2022 09:46:02 +0200
+Subject: [PATCH] Revert "block/rbd: implement bdrv_co_block_status"
+
+During backup, bdrv_co_block_status is called for each block copy
+chunk. When RBD is used, the current implementation with
+rbd_diff_iterate2() using whole_object=true takes about linearly more
+time, depending on the image size. Since there are linearly more
+chunks, the slowdown is quadratic, becoming unacceptable for large
+images (starting somewhere between 500-1000 GiB in my testing).
+
+This reverts commit 0347a8fd4c3faaedf119be04c197804be40a384b as a
+stop-gap measure, until it's clear how to make the implemenation
+more efficient.
+
+Upstream bug report:
+https://gitlab.com/qemu-project/qemu/-/issues/1026
+
+Signed-off-by: Fabian Ebner <f.ebner@proxmox.com>
+Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
+---
+ block/rbd.c | 112 ----------------------------------------------------
+ 1 file changed, 112 deletions(-)
+
+diff --git a/block/rbd.c b/block/rbd.c
+index e341745255..436d3d7811 100644
+--- a/block/rbd.c
++++ b/block/rbd.c
+@@ -108,12 +108,6 @@ typedef struct RBDTask {
+     int64_t ret;
+ } RBDTask;
+ 
+-typedef struct RBDDiffIterateReq {
+-    uint64_t offs;
+-    uint64_t bytes;
+-    bool exists;
+-} RBDDiffIterateReq;
+-
+ static int qemu_rbd_connect(rados_t *cluster, rados_ioctx_t *io_ctx,
+                             BlockdevOptionsRbd *opts, bool cache,
+                             const char *keypairs, const char *secretid,
+@@ -1460,111 +1454,6 @@ static ImageInfoSpecific *qemu_rbd_get_specific_info(BlockDriverState *bs,
+     return spec_info;
+ }
+ 
+-/*
+- * rbd_diff_iterate2 allows to interrupt the exection by returning a negative
+- * value in the callback routine. Choose a value that does not conflict with
+- * an existing exitcode and return it if we want to prematurely stop the
+- * execution because we detected a change in the allocation status.
+- */
+-#define QEMU_RBD_EXIT_DIFF_ITERATE2 -9000
+-
+-static int qemu_rbd_diff_iterate_cb(uint64_t offs, size_t len,
+-                                    int exists, void *opaque)
+-{
+-    RBDDiffIterateReq *req = opaque;
+-
+-    assert(req->offs + req->bytes <= offs);
+-    /*
+-     * we do not diff against a snapshot so we should never receive a callback
+-     * for a hole.
+-     */
+-    assert(exists);
+-
+-    if (!req->exists && offs > req->offs) {
+-        /*
+-         * we started in an unallocated area and hit the first allocated
+-         * block. req->bytes must be set to the length of the unallocated area
+-         * before the allocated area. stop further processing.
+-         */
+-        req->bytes = offs - req->offs;
+-        return QEMU_RBD_EXIT_DIFF_ITERATE2;
+-    }
+-
+-    if (req->exists && offs > req->offs + req->bytes) {
+-        /*
+-         * we started in an allocated area and jumped over an unallocated area,
+-         * req->bytes contains the length of the allocated area before the
+-         * unallocated area. stop further processing.
+-         */
+-        return QEMU_RBD_EXIT_DIFF_ITERATE2;
+-    }
+-
+-    req->bytes += len;
+-    req->exists = true;
+-
+-    return 0;
+-}
+-
+-static int coroutine_fn qemu_rbd_co_block_status(BlockDriverState *bs,
+-                                                 bool want_zero, int64_t offset,
+-                                                 int64_t bytes, int64_t *pnum,
+-                                                 int64_t *map,
+-                                                 BlockDriverState **file)
+-{
+-    BDRVRBDState *s = bs->opaque;
+-    int status, r;
+-    RBDDiffIterateReq req = { .offs = offset };
+-    uint64_t features, flags;
+-
+-    assert(offset + bytes <= s->image_size);
+-
+-    /* default to all sectors allocated */
+-    status = BDRV_BLOCK_DATA | BDRV_BLOCK_OFFSET_VALID;
+-    *map = offset;
+-    *file = bs;
+-    *pnum = bytes;
+-
+-    /* check if RBD image supports fast-diff */
+-    r = rbd_get_features(s->image, &features);
+-    if (r < 0) {
+-        return status;
+-    }
+-    if (!(features & RBD_FEATURE_FAST_DIFF)) {
+-        return status;
+-    }
+-
+-    /* check if RBD fast-diff result is valid */
+-    r = rbd_get_flags(s->image, &flags);
+-    if (r < 0) {
+-        return status;
+-    }
+-    if (flags & RBD_FLAG_FAST_DIFF_INVALID) {
+-        return status;
+-    }
+-
+-    r = rbd_diff_iterate2(s->image, NULL, offset, bytes, true, true,
+-                          qemu_rbd_diff_iterate_cb, &req);
+-    if (r < 0 && r != QEMU_RBD_EXIT_DIFF_ITERATE2) {
+-        return status;
+-    }
+-    assert(req.bytes <= bytes);
+-    if (!req.exists) {
+-        if (r == 0) {
+-            /*
+-             * rbd_diff_iterate2 does not invoke callbacks for unallocated
+-             * areas. This here catches the case where no callback was
+-             * invoked at all (req.bytes == 0).
+-             */
+-            assert(req.bytes == 0);
+-            req.bytes = bytes;
+-        }
+-        status = BDRV_BLOCK_ZERO | BDRV_BLOCK_OFFSET_VALID;
+-    }
+-
+-    *pnum = req.bytes;
+-    return status;
+-}
+-
+ static int64_t coroutine_fn qemu_rbd_co_getlength(BlockDriverState *bs)
+ {
+     BDRVRBDState *s = bs->opaque;
+@@ -1801,7 +1690,6 @@ static BlockDriver bdrv_rbd = {
+ #ifdef LIBRBD_SUPPORTS_WRITE_ZEROES
+     .bdrv_co_pwrite_zeroes  = qemu_rbd_co_pwrite_zeroes,
+ #endif
+-    .bdrv_co_block_status   = qemu_rbd_co_block_status,
+ 
+     .bdrv_snapshot_create   = qemu_rbd_snap_create,
+     .bdrv_snapshot_delete   = qemu_rbd_snap_remove,

debian/patches/pve/0042-PBS-add-master-key-support.patch

@@ -1,97 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Stefan Reiter <s.reiter@proxmox.com>
-Date: Wed, 10 Feb 2021 11:07:06 +0100
-Subject: [PATCH] PBS: add master key support
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-this requires a new enough libproxmox-backup-qemu0, and allows querying
-from the PVE side to avoid QMP calls with unsupported parameters.
-
-Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
-Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
----
- block/monitor/block-hmp-cmds.c | 1 +
- pve-backup.c                   | 3 +++
- qapi/block-core.json           | 7 +++++++
- 3 files changed, 11 insertions(+)
-
-diff --git a/block/monitor/block-hmp-cmds.c b/block/monitor/block-hmp-cmds.c
-index b838586fc0..5b52b93232 100644
---- a/block/monitor/block-hmp-cmds.c
-+++ b/block/monitor/block-hmp-cmds.c
-@@ -1039,6 +1039,7 @@ void coroutine_fn hmp_backup(Monitor *mon, const QDict *qdict)
-         false, NULL, // PBS password
-         false, NULL, // PBS keyfile
-         false, NULL, // PBS key_password
-+        false, NULL, // PBS master_keyfile
-         false, NULL, // PBS fingerprint
-         false, NULL, // PBS backup-id
-         false, 0, // PBS backup-time
-diff --git a/pve-backup.c b/pve-backup.c
-index f858003a06..04ebfc1e33 100644
---- a/pve-backup.c
-+++ b/pve-backup.c
-@@ -533,6 +533,7 @@ UuidInfo coroutine_fn *qmp_backup(
-     bool has_password, const char *password,
-     bool has_keyfile, const char *keyfile,
-     bool has_key_password, const char *key_password,
-+    bool has_master_keyfile, const char *master_keyfile,
-     bool has_fingerprint, const char *fingerprint,
-     bool has_backup_id, const char *backup_id,
-     bool has_backup_time, int64_t backup_time,
-@@ -681,6 +682,7 @@ UuidInfo coroutine_fn *qmp_backup(
-             has_password ? password : NULL,
-             has_keyfile ? keyfile : NULL,
-             has_key_password ? key_password : NULL,
-+            has_master_keyfile ? master_keyfile : NULL,
-             has_compress ? compress : true,
-             has_encrypt ? encrypt : has_keyfile,
-             has_fingerprint ? fingerprint : NULL,
-@@ -1044,5 +1046,6 @@ ProxmoxSupportStatus *qmp_query_proxmox_support(Error **errp)
-     ret->pbs_dirty_bitmap_savevm = true;
-     ret->pbs_dirty_bitmap_migration = true;
-     ret->query_bitmap_info = true;
-+    ret->pbs_masterkey = true;
-     return ret;
- }
-diff --git a/qapi/block-core.json b/qapi/block-core.json
-index afa67c28d2..84e4406d21 100644
---- a/qapi/block-core.json
-+++ b/qapi/block-core.json
-@@ -772,6 +772,8 @@
- #
- # @key-password: password for keyfile (optional for format 'pbs')
- #
-+# @master-keyfile: PEM-formatted master public keyfile (optional for format 'pbs')
-+#
- # @fingerprint: server cert fingerprint (optional for format 'pbs')
- #
- # @backup-id: backup ID (required for format 'pbs')
-@@ -791,6 +793,7 @@
-                                     '*password': 'str',
-                                     '*keyfile': 'str',
-                                     '*key-password': 'str',
-+                                    '*master-keyfile': 'str',
-                                     '*fingerprint': 'str',
-                                     '*backup-id': 'str',
-                                     '*backup-time': 'int',
-@@ -843,6 +846,9 @@
- #                              migration cap if this is false/unset may lead
- #                              to crashes on migration!
- #
-+# @pbs-masterkey: True if the QMP backup call supports the 'master_keyfile'
-+#                 parameter.
-+#
- # @pbs-library-version: Running version of libproxmox-backup-qemu0 library.
- #
- ##
-@@ -851,6 +857,7 @@
-             'query-bitmap-info': 'bool',
-             'pbs-dirty-bitmap-savevm': 'bool',
-             'pbs-dirty-bitmap-migration': 'bool',
-+            'pbs-masterkey': 'bool',
-             'pbs-library-version': 'str' } }
- 
- ##

debian/patches/pve/0042-alloc-track-error-out-when-auto-remove-is-not-set.patch

@@ -0,0 +1,43 @@
+From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
+From: Fiona Ebner <f.ebner@proxmox.com>
+Date: Tue, 26 Mar 2024 14:57:51 +0100
+Subject: [PATCH] alloc-track: error out when auto-remove is not set
+
+Since replacing the node now happens in the stream job, where the
+option cannot be read from (it's internal to the driver), it will
+always be treated as on.
+
+qemu-server will always set it, make sure to have other users notice
+the change (should they even exist). The option can be fully dropped
+in the future while adding a version guard in qemu-server.
+
+Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
+---
+ block/alloc-track.c | 7 +++++--
+ 1 file changed, 5 insertions(+), 2 deletions(-)
+
+diff --git a/block/alloc-track.c b/block/alloc-track.c
+index b4a9851144..fc7d58a5d0 100644
+--- a/block/alloc-track.c
++++ b/block/alloc-track.c
+@@ -34,7 +34,6 @@ typedef struct {
+     BdrvDirtyBitmap *bitmap;
+     uint64_t granularity;
+     DropState drop_state;
+-    bool auto_remove;
+ } BDRVAllocTrackState;
+ 
+ static QemuOptsList runtime_opts = {
+@@ -86,7 +85,11 @@ static int track_open(BlockDriverState *bs, QDict *options, int flags,
+         goto fail;
+     }
+ 
+-    s->auto_remove = qemu_opt_get_bool(opts, TRACK_OPT_AUTO_REMOVE, false);
++    if (!qemu_opt_get_bool(opts, TRACK_OPT_AUTO_REMOVE, false)) {
++        error_setg(errp, "alloc-track: requires auto-remove option to be set to on");
++        ret = -EINVAL;
++        goto fail;
++    }
+ 
+     /* open the target (write) node, backing will be attached by block layer */
+     file = bdrv_open_child(NULL, options, "file", bs, &child_of_bds,

debian/patches/pve/0043-PVE-block-pbs-fast-path-reads-without-allocation-if-.patch

@@ -1,52 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Stefan Reiter <s.reiter@proxmox.com>
-Date: Wed, 9 Dec 2020 11:46:57 +0100
-Subject: [PATCH] PVE: block/pbs: fast-path reads without allocation if
- possible
-
-...and switch over to g_malloc/g_free while at it to align with other
-QEMU code.
-
-Tracing shows the fast-path is taken almost all the time, though not
-100% so the slow one is still necessary.
-
-Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
----
- block/pbs.c | 17 ++++++++++++++---
- 1 file changed, 14 insertions(+), 3 deletions(-)
-
-diff --git a/block/pbs.c b/block/pbs.c
-index 78dad0dcc4..ac54e816c0 100644
---- a/block/pbs.c
-+++ b/block/pbs.c
-@@ -200,7 +200,16 @@ static coroutine_fn int pbs_co_preadv(BlockDriverState *bs,
-     BDRVPBSState *s = bs->opaque;
-     int ret;
-     char *pbs_error = NULL;
--    uint8_t *buf = malloc(bytes);
-+    uint8_t *buf;
-+    bool inline_buf = true;
-+
-+    /* for single-buffer IO vectors we can fast-path the write directly to it */
-+    if (qiov->niov == 1 && qiov->iov->iov_len >= bytes) {
-+        buf = qiov->iov->iov_base;
-+    } else {
-+        inline_buf = false;
-+        buf = g_malloc(bytes);
-+    }
- 
-     ReadCallbackData rcb = {
-         .co = qemu_coroutine_self(),
-@@ -218,8 +227,10 @@ static coroutine_fn int pbs_co_preadv(BlockDriverState *bs,
-         return -EIO;
-     }
- 
--    qemu_iovec_from_buf(qiov, 0, buf, bytes);
--    free(buf);
-+    if (!inline_buf) {
-+        qemu_iovec_from_buf(qiov, 0, buf, bytes);
-+        g_free(buf);
-+    }
- 
-     return ret;
- }

debian/patches/pve/0043-alloc-track-avoid-seemingly-superfluous-child-permis.patch

@@ -0,0 +1,84 @@
+From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
+From: Fiona Ebner <f.ebner@proxmox.com>
+Date: Wed, 27 Mar 2024 11:15:39 +0100
+Subject: [PATCH] alloc-track: avoid seemingly superfluous child permission
+ update
+
+Doesn't seem necessary nowadays (maybe after commit "alloc-track: fix
+deadlock during drop" where the dropping is not rescheduled and delayed
+anymore or some upstream change). Should there really be some issue,
+instead of having a drop state, this could also be just based off the
+fact whether there is still a backing child.
+
+Dumping the cumulative (shared) permissions for the BDS with a debug
+print yields the same values after this patch and with QEMU 8.1,
+namely 3 and 5.
+
+Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
+---
+ block/alloc-track.c | 26 --------------------------
+ 1 file changed, 26 deletions(-)
+
+diff --git a/block/alloc-track.c b/block/alloc-track.c
+index fc7d58a5d0..b56425b7f0 100644
+--- a/block/alloc-track.c
++++ b/block/alloc-track.c
+@@ -25,15 +25,9 @@
+ 
+ #define TRACK_OPT_AUTO_REMOVE "auto-remove"
+ 
+-typedef enum DropState {
+-    DropNone,
+-    DropInProgress,
+-} DropState;
+-
+ typedef struct {
+     BdrvDirtyBitmap *bitmap;
+     uint64_t granularity;
+-    DropState drop_state;
+ } BDRVAllocTrackState;
+ 
+ static QemuOptsList runtime_opts = {
+@@ -137,8 +131,6 @@ static int track_open(BlockDriverState *bs, QDict *options, int flags,
+         goto fail;
+     }
+ 
+-    s->drop_state = DropNone;
+-
+ fail:
+     if (ret < 0) {
+         bdrv_graph_wrlock();
+@@ -289,18 +281,8 @@ track_child_perm(BlockDriverState *bs, BdrvChild *c, BdrvChildRole role,
+                  BlockReopenQueue *reopen_queue, uint64_t perm, uint64_t shared,
+                  uint64_t *nperm, uint64_t *nshared)
+ {
+-    BDRVAllocTrackState *s = bs->opaque;
+-
+     *nshared = BLK_PERM_ALL;
+ 
+-    /* in case we're currently dropping ourselves, claim to not use any
+-     * permissions at all - which is fine, since from this point on we will
+-     * never issue a read or write anymore */
+-    if (s->drop_state == DropInProgress) {
+-        *nperm = 0;
+-        return;
+-    }
+-
+     if (role & BDRV_CHILD_DATA) {
+         *nperm = perm & DEFAULT_PERM_PASSTHROUGH;
+     } else {
+@@ -326,14 +308,6 @@ track_co_change_backing_file(BlockDriverState *bs, const char *backing_file,
+      * kinda fits better, but in the long-term, a special parameter would be
+      * nice (or done via qemu-server via upcoming blockdev-replace QMP command).
+      */
+-    if (backing_file == NULL) {
+-        BDRVAllocTrackState *s = bs->opaque;
+-        bdrv_drained_begin(bs);
+-        s->drop_state = DropInProgress;
+-        bdrv_child_refresh_perms(bs, bs->file, &error_abort);
+-        bdrv_drained_end(bs);
+-    }
+-
+     return 0;
+ }
+ 

debian/patches/pve/0044-copy-before-write-allow-specifying-minimum-cluster-s.patch

@@ -0,0 +1,133 @@
+From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
+From: Fiona Ebner <f.ebner@proxmox.com>
+Date: Thu, 11 Apr 2024 11:29:26 +0200
+Subject: [PATCH] copy-before-write: allow specifying minimum cluster size
+
+Useful to make discard-source work in the context of backup fleecing
+when the fleecing image has a larger granularity than the backup
+target.
+
+Copy-before-write operations will use at least this granularity and in
+particular, discard requests to the source node will too. If the
+granularity is too small, they will just be aligned down in
+cbw_co_pdiscard_snapshot() and thus effectively ignored.
+
+The QAPI uses uint32 so the value will be non-negative, but still fit
+into a uint64_t.
+
+Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
+Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
+---
+ block/block-copy.c         | 17 +++++++++++++----
+ block/copy-before-write.c  |  3 ++-
+ include/block/block-copy.h |  1 +
+ qapi/block-core.json       |  8 +++++++-
+ 4 files changed, 23 insertions(+), 6 deletions(-)
+
+diff --git a/block/block-copy.c b/block/block-copy.c
+index cc618e4561..12d662e9d4 100644
+--- a/block/block-copy.c
++++ b/block/block-copy.c
+@@ -310,6 +310,7 @@ void block_copy_set_copy_opts(BlockCopyState *s, bool use_copy_range,
+ }
+ 
+ static int64_t block_copy_calculate_cluster_size(BlockDriverState *target,
++                                                 int64_t min_cluster_size,
+                                                  Error **errp)
+ {
+     int ret;
+@@ -335,7 +336,7 @@ static int64_t block_copy_calculate_cluster_size(BlockDriverState *target,
+                     "used. If the actual block size of the target exceeds "
+                     "this default, the backup may be unusable",
+                     BLOCK_COPY_CLUSTER_SIZE_DEFAULT);
+-        return BLOCK_COPY_CLUSTER_SIZE_DEFAULT;
++        return MAX(min_cluster_size, BLOCK_COPY_CLUSTER_SIZE_DEFAULT);
+     } else if (ret < 0 && !target_does_cow) {
+         error_setg_errno(errp, -ret,
+             "Couldn't determine the cluster size of the target image, "
+@@ -345,16 +346,18 @@ static int64_t block_copy_calculate_cluster_size(BlockDriverState *target,
+         return ret;
+     } else if (ret < 0 && target_does_cow) {
+         /* Not fatal; just trudge on ahead. */
+-        return BLOCK_COPY_CLUSTER_SIZE_DEFAULT;
++        return MAX(min_cluster_size, BLOCK_COPY_CLUSTER_SIZE_DEFAULT);
+     }
+ 
+-    return MAX(BLOCK_COPY_CLUSTER_SIZE_DEFAULT, bdi.cluster_size);
++    return MAX(min_cluster_size,
++               MAX(BLOCK_COPY_CLUSTER_SIZE_DEFAULT, bdi.cluster_size));
+ }
+ 
+ BlockCopyState *block_copy_state_new(BdrvChild *source, BdrvChild *target,
+                                      BlockDriverState *copy_bitmap_bs,
+                                      const BdrvDirtyBitmap *bitmap,
+                                      bool discard_source,
++                                     int64_t min_cluster_size,
+                                      Error **errp)
+ {
+     ERRP_GUARD();
+@@ -365,7 +368,13 @@ BlockCopyState *block_copy_state_new(BdrvChild *source, BdrvChild *target,
+ 
+     GLOBAL_STATE_CODE();
+ 
+-    cluster_size = block_copy_calculate_cluster_size(target->bs, errp);
++    if (min_cluster_size && !is_power_of_2(min_cluster_size)) {
++        error_setg(errp, "min-cluster-size needs to be a power of 2");
++        return NULL;
++    }
++
++    cluster_size = block_copy_calculate_cluster_size(target->bs,
++                                                     min_cluster_size, errp);
+     if (cluster_size < 0) {
+         return NULL;
+     }
+diff --git a/block/copy-before-write.c b/block/copy-before-write.c
+index 28f6a096cd..ef4e666303 100644
+--- a/block/copy-before-write.c
++++ b/block/copy-before-write.c
+@@ -478,7 +478,8 @@ static int cbw_open(BlockDriverState *bs, QDict *options, int flags,
+ 
+     s->discard_source = flags & BDRV_O_CBW_DISCARD_SOURCE;
+     s->bcs = block_copy_state_new(bs->file, s->target, bs, bitmap,
+-                                  flags & BDRV_O_CBW_DISCARD_SOURCE, errp);
++                                  flags & BDRV_O_CBW_DISCARD_SOURCE,
++                                  opts->min_cluster_size, errp);
+     if (!s->bcs) {
+         error_prepend(errp, "Cannot create block-copy-state: ");
+         return -EINVAL;
+diff --git a/include/block/block-copy.h b/include/block/block-copy.h
+index bdc703bacd..77857c6c68 100644
+--- a/include/block/block-copy.h
++++ b/include/block/block-copy.h
+@@ -28,6 +28,7 @@ BlockCopyState *block_copy_state_new(BdrvChild *source, BdrvChild *target,
+                                      BlockDriverState *copy_bitmap_bs,
+                                      const BdrvDirtyBitmap *bitmap,
+                                      bool discard_source,
++                                     int64_t min_cluster_size,
+                                      Error **errp);
+ 
+ /* Function should be called prior any actual copy request */
+diff --git a/qapi/block-core.json b/qapi/block-core.json
+index 521a1914e8..171846deb1 100644
+--- a/qapi/block-core.json
++++ b/qapi/block-core.json
+@@ -4927,12 +4927,18 @@
+ #     @on-cbw-error parameter will decide how this failure is handled.
+ #     Default 0.  (Since 7.1)
+ #
++# @min-cluster-size: Minimum size of blocks used by copy-before-write
++#     operations.  Has to be a power of 2.  No effect if smaller than
++#     the maximum of the target's cluster size and 64 KiB.  Default 0.
++#     (Since 8.1)
++#
+ # Since: 6.2
+ ##
+ { 'struct': 'BlockdevOptionsCbw',
+   'base': 'BlockdevOptionsGenericFormat',
+   'data': { 'target': 'BlockdevRef', '*bitmap': 'BlockDirtyBitmap',
+-            '*on-cbw-error': 'OnCbwError', '*cbw-timeout': 'uint32' } }
++            '*on-cbw-error': 'OnCbwError', '*cbw-timeout': 'uint32',
++            '*min-cluster-size': 'uint32' } }
+ 
+ ##
+ # @BlockdevOptions:

debian/patches/pve/0045-backup-add-minimum-cluster-size-to-performance-optio.patch

@@ -0,0 +1,106 @@
+From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
+From: Fiona Ebner <f.ebner@proxmox.com>
+Date: Thu, 11 Apr 2024 11:29:27 +0200
+Subject: [PATCH] backup: add minimum cluster size to performance options
+
+Useful to make discard-source work in the context of backup fleecing
+when the fleecing image has a larger granularity than the backup
+target.
+
+Backup/block-copy will use at least this granularity for copy operations
+and in particular, discard requests to the backup source will too. If
+the granularity is too small, they will just be aligned down in
+cbw_co_pdiscard_snapshot() and thus effectively ignored.
+
+Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
+Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
+---
+ block/backup.c            | 2 +-
+ block/copy-before-write.c | 2 ++
+ block/copy-before-write.h | 1 +
+ blockdev.c                | 3 +++
+ qapi/block-core.json      | 9 +++++++--
+ 5 files changed, 14 insertions(+), 3 deletions(-)
+
+diff --git a/block/backup.c b/block/backup.c
+index 1963e47ab9..fe69723ada 100644
+--- a/block/backup.c
++++ b/block/backup.c
+@@ -434,7 +434,7 @@ BlockJob *backup_job_create(const char *job_id, BlockDriverState *bs,
+     }
+ 
+     cbw = bdrv_cbw_append(bs, target, filter_node_name, discard_source,
+-                          &bcs, errp);
++                          perf->min_cluster_size, &bcs, errp);
+     if (!cbw) {
+         goto error;
+     }
+diff --git a/block/copy-before-write.c b/block/copy-before-write.c
+index ef4e666303..adb27649a8 100644
+--- a/block/copy-before-write.c
++++ b/block/copy-before-write.c
+@@ -547,6 +547,7 @@ BlockDriverState *bdrv_cbw_append(BlockDriverState *source,
+                                   BlockDriverState *target,
+                                   const char *filter_node_name,
+                                   bool discard_source,
++                                  int64_t min_cluster_size,
+                                   BlockCopyState **bcs,
+                                   Error **errp)
+ {
+@@ -565,6 +566,7 @@ BlockDriverState *bdrv_cbw_append(BlockDriverState *source,
+     }
+     qdict_put_str(opts, "file", bdrv_get_node_name(source));
+     qdict_put_str(opts, "target", bdrv_get_node_name(target));
++    qdict_put_int(opts, "min-cluster-size", min_cluster_size);
+ 
+     top = bdrv_insert_node(source, opts, flags, errp);
+     if (!top) {
+diff --git a/block/copy-before-write.h b/block/copy-before-write.h
+index 01af0cd3c4..dc6cafe7fa 100644
+--- a/block/copy-before-write.h
++++ b/block/copy-before-write.h
+@@ -40,6 +40,7 @@ BlockDriverState *bdrv_cbw_append(BlockDriverState *source,
+                                   BlockDriverState *target,
+                                   const char *filter_node_name,
+                                   bool discard_source,
++                                  int64_t min_cluster_size,
+                                   BlockCopyState **bcs,
+                                   Error **errp);
+ void bdrv_cbw_drop(BlockDriverState *bs);
+diff --git a/blockdev.c b/blockdev.c
+index 8080c47fa6..3f67eb413d 100644
+--- a/blockdev.c
++++ b/blockdev.c
+@@ -2656,6 +2656,9 @@ static BlockJob *do_backup_common(BackupCommon *backup,
+         if (backup->x_perf->has_max_chunk) {
+             perf.max_chunk = backup->x_perf->max_chunk;
+         }
++        if (backup->x_perf->has_min_cluster_size) {
++            perf.min_cluster_size = backup->x_perf->min_cluster_size;
++        }
+     }
+ 
+     if ((backup->sync == MIRROR_SYNC_MODE_BITMAP) ||
+diff --git a/qapi/block-core.json b/qapi/block-core.json
+index 171846deb1..653df22046 100644
+--- a/qapi/block-core.json
++++ b/qapi/block-core.json
+@@ -1790,11 +1790,16 @@
+ #     it should not be less than job cluster size which is calculated
+ #     as maximum of target image cluster size and 64k.  Default 0.
+ #
++# @min-cluster-size: Minimum size of blocks used by copy-before-write
++#     and background copy operations.  Has to be a power of 2.  No
++#     effect if smaller than the maximum of the target's cluster size
++#     and 64 KiB.  Default 0. (Since 8.1)
++#
+ # Since: 6.0
+ ##
+ { 'struct': 'BackupPerf',
+-  'data': { '*use-copy-range': 'bool',
+-            '*max-workers': 'int', '*max-chunk': 'int64' } }
++  'data': { '*use-copy-range': 'bool', '*max-workers': 'int',
++            '*max-chunk': 'int64', '*min-cluster-size': 'uint32' } }
+ 
+ ##
+ # @BackupCommon:

debian/patches/pve/0045-block-io-accept-NULL-qiov-in-bdrv_pad_request.patch

@@ -1,31 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Stefan Reiter <s.reiter@proxmox.com>
-Date: Tue, 2 Mar 2021 16:11:54 +0100
-Subject: [PATCH] block/io: accept NULL qiov in bdrv_pad_request
-
-Some operations, e.g. block-stream, perform reads while discarding the
-results (only copy-on-read matters). In this case they will pass NULL as
-the target QEMUIOVector, which will however trip bdrv_pad_request, since
-it wants to extend its passed vector.
-
-Simply check for NULL and do nothing, there's no reason to pad the
-target if it will be discarded anyway.
----
- block/io.c | 4 ++++
- 1 file changed, 4 insertions(+)
-
-diff --git a/block/io.c b/block/io.c
-index a19942718b..9fa8252258 100644
---- a/block/io.c
-+++ b/block/io.c
-@@ -1763,6 +1763,10 @@ static int bdrv_pad_request(BlockDriverState *bs,
- {
-     int ret;
- 
-+    if (!qiov) {
-+        return 0;
-+    }
-+
-     bdrv_check_qiov_request(*offset, *bytes, *qiov, *qiov_offset, &error_abort);
- 
-     if (!bdrv_init_padding(bs, *offset, *bytes, pad)) {

debian/patches/pve/0046-PVE-backup-add-fleecing-option.patch

@@ -0,0 +1,337 @@
+From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
+From: Fiona Ebner <f.ebner@proxmox.com>
+Date: Thu, 11 Apr 2024 11:29:28 +0200
+Subject: [PATCH] PVE backup: add fleecing option
+
+When a fleecing option is given, it is expected that each device has
+a corresponding "-fleecing" block device already attached, except for
+EFI disk and TPM state, where fleecing is never used.
+
+The following graph was adapted from [0] which also contains more
+details about fleecing.
+
+[guest]
+   |
+   | root
+   v                 file
+[copy-before-write]<------[snapshot-access]
+   |           |
+   | file      | target
+   v           v
+[source] [fleecing]
+
+For fleecing, a copy-before-write filter is inserted on top of the
+source node, as well as a snapshot-access node pointing to the filter
+node which allows to read the consistent state of the image at the
+time it was inserted. New guest writes are passed through the
+copy-before-write filter which will first copy over old data to the
+fleecing image in case that old data is still needed by the
+snapshot-access node.
+
+The backup process will sequentially read from the snapshot access,
+which has a bitmap and knows whether to read from the original image
+or the fleecing image to get the "snapshot" state, i.e. data from the
+source image at the time when the copy-before-write filter was
+inserted. After reading, the copied sections are discarded from the
+fleecing image to reduce space usage.
+
+All of this can be restricted by an initial dirty bitmap to parts of
+the source image that are required for an incremental backup.
+
+For discard to work, it is necessary that the fleecing image does not
+have a larger cluster size than the backup job granularity. Since
+querying that size does not always work, e.g. for RBD with krbd, the
+cluster size will not be reported, a minimum of 4 MiB is used. A job
+with PBS target already has at least this granularity, so it's just
+relevant for other targets. I.e. edge cases where this minimum is not
+enough should be very rare in practice. If ever necessary in the
+future, can still add a passed-in value for the backup QMP command to
+override.
+
+Additionally, the cbw-timeout and on-cbw-error=break-snapshot options
+are set when installing the copy-before-write filter and
+snapshot-access. When an error or timeout occurs, the problematic (and
+each further) snapshot operation will fail and thus cancel the backup
+instead of breaking the guest write.
+
+Note that job_id cannot be inferred from the snapshot-access bs because
+it has no parent, so just pass the one from the original bs.
+
+[0]: https://www.mail-archive.com/qemu-devel@nongnu.org/msg876056.html
+
+Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
+Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
+---
+ block/monitor/block-hmp-cmds.c |   1 +
+ pve-backup.c                   | 135 ++++++++++++++++++++++++++++++++-
+ qapi/block-core.json           |  10 ++-
+ 3 files changed, 142 insertions(+), 4 deletions(-)
+
+diff --git a/block/monitor/block-hmp-cmds.c b/block/monitor/block-hmp-cmds.c
+index 439a7a14c8..d0e7771dcc 100644
+--- a/block/monitor/block-hmp-cmds.c
++++ b/block/monitor/block-hmp-cmds.c
+@@ -1044,6 +1044,7 @@ void coroutine_fn hmp_backup(Monitor *mon, const QDict *qdict)
+         NULL, NULL,
+         devlist, qdict_haskey(qdict, "speed"), speed,
+         false, 0, // BackupPerf max-workers
++        false, false, // fleecing
+         &error);
+ 
+     hmp_handle_error(mon, error);
+diff --git a/pve-backup.c b/pve-backup.c
+index 57477f7f2a..0f098000dd 100644
+--- a/pve-backup.c
++++ b/pve-backup.c
+@@ -7,9 +7,11 @@
+ #include "sysemu/blockdev.h"
+ #include "block/block_int-global-state.h"
+ #include "block/blockjob.h"
++#include "block/copy-before-write.h"
+ #include "block/dirty-bitmap.h"
+ #include "block/graph-lock.h"
+ #include "qapi/qapi-commands-block.h"
++#include "qapi/qmp/qdict.h"
+ #include "qapi/qmp/qerror.h"
+ #include "qemu/cutils.h"
+ 
+@@ -80,8 +82,15 @@ static void pvebackup_init(void)
+ // initialize PVEBackupState at startup
+ opts_init(pvebackup_init);
+ 
++typedef struct PVEBackupFleecingInfo {
++    BlockDriverState *bs;
++    BlockDriverState *cbw;
++    BlockDriverState *snapshot_access;
++} PVEBackupFleecingInfo;
++
+ typedef struct PVEBackupDevInfo {
+     BlockDriverState *bs;
++    PVEBackupFleecingInfo fleecing;
+     size_t size;
+     uint64_t block_size;
+     uint8_t dev_id;
+@@ -353,6 +362,22 @@ static void pvebackup_complete_cb(void *opaque, int ret)
+     PVEBackupDevInfo *di = opaque;
+     di->completed_ret = ret;
+ 
++    /*
++     * Handle block-graph specific cleanup (for fleecing) outside of the coroutine, because the work
++     * won't be done as a coroutine anyways:
++     * - For snapshot_access, allows doing bdrv_unref() directly. Doing it via bdrv_co_unref() would
++     *   just spawn a BH calling bdrv_unref().
++     * - For cbw, draining would need to spawn a BH.
++     */
++    if (di->fleecing.snapshot_access) {
++        bdrv_unref(di->fleecing.snapshot_access);
++        di->fleecing.snapshot_access = NULL;
++    }
++    if (di->fleecing.cbw) {
++        bdrv_cbw_drop(di->fleecing.cbw);
++        di->fleecing.cbw = NULL;
++    }
++
+     /*
+      * Needs to happen outside of coroutine, because it takes the graph write lock.
+      */
+@@ -519,9 +544,77 @@ static void create_backup_jobs_bh(void *opaque) {
+         }
+         bdrv_drained_begin(di->bs);
+ 
++        BackupPerf perf = (BackupPerf){ .max_workers = backup_state.perf.max_workers };
++
++        BlockDriverState *source_bs = di->bs;
++        bool discard_source = false;
++        bdrv_graph_co_rdlock();
++        const char *job_id = bdrv_get_device_name(di->bs);
++        bdrv_graph_co_rdunlock();
++        if (di->fleecing.bs) {
++            QDict *cbw_opts = qdict_new();
++            qdict_put_str(cbw_opts, "driver", "copy-before-write");
++            qdict_put_str(cbw_opts, "file", bdrv_get_node_name(di->bs));
++            qdict_put_str(cbw_opts, "target", bdrv_get_node_name(di->fleecing.bs));
++
++            if (di->bitmap) {
++                /*
++                 * Only guest writes to parts relevant for the backup need to be intercepted with
++                 * old data being copied to the fleecing image.
++                 */
++                qdict_put_str(cbw_opts, "bitmap.node", bdrv_get_node_name(di->bs));
++                qdict_put_str(cbw_opts, "bitmap.name", bdrv_dirty_bitmap_name(di->bitmap));
++            }
++            /*
++             * Fleecing storage is supposed to be fast and it's better to break backup than guest
++             * writes. Certain guest drivers like VirtIO-win have 60 seconds timeout by default, so
++             * abort a bit before that.
++             */
++            qdict_put_str(cbw_opts, "on-cbw-error", "break-snapshot");
++            qdict_put_int(cbw_opts, "cbw-timeout", 45);
++
++            di->fleecing.cbw = bdrv_insert_node(di->bs, cbw_opts, BDRV_O_RDWR, &local_err);
++
++            if (!di->fleecing.cbw) {
++                error_setg(errp, "appending cbw node for fleecing failed: %s",
++                           local_err ? error_get_pretty(local_err) : "unknown error");
++                break;
++            }
++
++            QDict *snapshot_access_opts = qdict_new();
++            qdict_put_str(snapshot_access_opts, "driver", "snapshot-access");
++            qdict_put_str(snapshot_access_opts, "file", bdrv_get_node_name(di->fleecing.cbw));
++
++            di->fleecing.snapshot_access =
++                bdrv_open(NULL, NULL, snapshot_access_opts, BDRV_O_RDWR | BDRV_O_UNMAP, &local_err);
++            if (!di->fleecing.snapshot_access) {
++                error_setg(errp, "setting up snapshot access for fleecing failed: %s",
++                           local_err ? error_get_pretty(local_err) : "unknown error");
++                break;
++            }
++            source_bs = di->fleecing.snapshot_access;
++            discard_source = true;
++
++            /*
++             * bdrv_get_info() just retuns 0 (= doesn't matter) for RBD when using krbd. But discard
++             * on the fleecing image won't work if the backup job's granularity is less than the RBD
++             * object size (default 4 MiB), so it does matter. Always use at least 4 MiB. With a PBS
++             * target, the backup job granularity would already be at least this much.
++             */
++            perf.min_cluster_size = 4 * 1024 * 1024;
++            /*
++             * For discard to work, cluster size for the backup job must be at least the same as for
++             * the fleecing image.
++             */
++            BlockDriverInfo bdi;
++            if (bdrv_get_info(di->fleecing.bs, &bdi) >= 0) {
++                perf.min_cluster_size = MAX(perf.min_cluster_size, bdi.cluster_size);
++            }
++        }
++
+         BlockJob *job = backup_job_create(
+-            NULL, di->bs, di->target, backup_state.speed, sync_mode, di->bitmap,
+-            bitmap_mode, false, NULL, &backup_state.perf, BLOCKDEV_ON_ERROR_REPORT,
++            job_id, source_bs, di->target, backup_state.speed, sync_mode, di->bitmap,
++            bitmap_mode, false, discard_source, NULL, &perf, BLOCKDEV_ON_ERROR_REPORT,
+             BLOCKDEV_ON_ERROR_REPORT, JOB_DEFAULT, pvebackup_complete_cb, di, backup_state.txn,
+             &local_err);
+ 
+@@ -577,6 +670,14 @@ static void create_backup_jobs_bh(void *opaque) {
+     aio_co_enter(data->ctx, data->co);
+ }
+ 
++/*
++ * EFI disk and TPM state are small and it's just not worth setting up fleecing for them.
++ */
++static bool device_uses_fleecing(const char *device_id)
++{
++    return strncmp(device_id, "drive-efidisk", 13) && strncmp(device_id, "drive-tpmstate", 14);
++}
++
+ /*
+  * Returns a list of device infos, which needs to be freed by the caller. In
+  * case of an error, errp will be set, but the returned value might still be a
+@@ -584,6 +685,7 @@ static void create_backup_jobs_bh(void *opaque) {
+  */
+ static GList coroutine_fn GRAPH_RDLOCK *get_device_info(
+     const char *devlist,
++    bool fleecing,
+     Error **errp)
+ {
+     gchar **devs = NULL;
+@@ -607,6 +709,31 @@ static GList coroutine_fn GRAPH_RDLOCK *get_device_info(
+             }
+             PVEBackupDevInfo *di = g_new0(PVEBackupDevInfo, 1);
+             di->bs = bs;
++
++            if (fleecing && device_uses_fleecing(*d)) {
++                g_autofree gchar *fleecing_devid = g_strconcat(*d, "-fleecing", NULL);
++                BlockBackend *fleecing_blk = blk_by_name(fleecing_devid);
++                if (!fleecing_blk) {
++                    error_set(errp, ERROR_CLASS_DEVICE_NOT_FOUND,
++                              "Device '%s' not found", fleecing_devid);
++                    goto err;
++                }
++                BlockDriverState *fleecing_bs = blk_bs(fleecing_blk);
++                if (!bdrv_co_is_inserted(fleecing_bs)) {
++                    error_setg(errp, "Device '%s' has no medium", fleecing_devid);
++                    goto err;
++                }
++                /*
++                 * Fleecing image needs to be the same size to act as a cbw target.
++                 */
++                if (bs->total_sectors != fleecing_bs->total_sectors) {
++                    error_setg(errp, "Size mismatch for '%s' - sector count %ld != %ld",
++                               fleecing_devid, fleecing_bs->total_sectors, bs->total_sectors);
++                    goto err;
++                }
++                di->fleecing.bs = fleecing_bs;
++            }
++
+             di_list = g_list_append(di_list, di);
+             d++;
+         }
+@@ -656,6 +783,7 @@ UuidInfo coroutine_fn *qmp_backup(
+     const char *devlist,
+     bool has_speed, int64_t speed,
+     bool has_max_workers, int64_t max_workers,
++    bool has_fleecing, bool fleecing,
+     Error **errp)
+ {
+     assert(qemu_in_coroutine());
+@@ -684,7 +812,7 @@ UuidInfo coroutine_fn *qmp_backup(
+     format = has_format ? format : BACKUP_FORMAT_VMA;
+ 
+     bdrv_graph_co_rdlock();
+-    di_list = get_device_info(devlist, &local_err);
++    di_list = get_device_info(devlist, has_fleecing && fleecing, &local_err);
+     bdrv_graph_co_rdunlock();
+     if (local_err) {
+         error_propagate(errp, local_err);
+@@ -1089,5 +1217,6 @@ ProxmoxSupportStatus *qmp_query_proxmox_support(Error **errp)
+     ret->query_bitmap_info = true;
+     ret->pbs_masterkey = true;
+     ret->backup_max_workers = true;
++    ret->backup_fleecing = true;
+     return ret;
+ }
+diff --git a/qapi/block-core.json b/qapi/block-core.json
+index 653df22046..9f25c398ec 100644
+--- a/qapi/block-core.json
++++ b/qapi/block-core.json
+@@ -948,6 +948,10 @@
+ #
+ # @max-workers: see @BackupPerf for details. Default 16.
+ #
++# @fleecing: perform a backup with fleecing. For each device in @devlist, a
++#            corresponing '-fleecing' device with the same size already needs to
++#            be present.
++#
+ # Returns: the uuid of the backup job
+ #
+ ##
+@@ -968,7 +972,8 @@
+                                     '*firewall-file': 'str',
+                                     '*devlist': 'str',
+                                     '*speed': 'int',
+-                                    '*max-workers': 'int' },
++                                    '*max-workers': 'int',
++                                    '*fleecing': 'bool' },
+   'returns': 'UuidInfo', 'coroutine': true }
+ 
+ ##
+@@ -1014,6 +1019,8 @@
+ #
+ # @pbs-library-version: Running version of libproxmox-backup-qemu0 library.
+ #
++# @backup-fleecing: Whether backup fleecing is supported or not.
++#
+ # @backup-max-workers: Whether the 'max-workers' @BackupPerf setting is
+ #     supported or not.
+ #
+@@ -1025,6 +1032,7 @@
+             'pbs-dirty-bitmap-migration': 'bool',
+             'pbs-masterkey': 'bool',
+             'pbs-library-version': 'str',
++            'backup-fleecing': 'bool',
+             'backup-max-workers': 'bool' } }
+ 
+ ##

debian/patches/pve/0047-PVE-backup-improve-error-when-copy-before-write-fail.patch

@@ -0,0 +1,117 @@
+From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
+From: Fiona Ebner <f.ebner@proxmox.com>
+Date: Mon, 29 Apr 2024 14:43:58 +0200
+Subject: [PATCH] PVE backup: improve error when copy-before-write fails for
+ fleecing
+
+With fleecing, failure for copy-before-write does not fail the guest
+write, but only sets the snapshot error that is associated to the
+copy-before-write filter, making further requests to the snapshot
+access fail with EACCES, which then also fails the job. But that error
+code is not the root cause of why the backup failed, so bubble up the
+original snapshot error instead.
+
+Reported-by: Friedrich Weber <f.weber@proxmox.com>
+Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
+Tested-by: Friedrich Weber <f.weber@proxmox.com>
+---
+ block/copy-before-write.c | 18 ++++++++++++------
+ block/copy-before-write.h |  1 +
+ pve-backup.c              |  9 +++++++++
+ 3 files changed, 22 insertions(+), 6 deletions(-)
+
+diff --git a/block/copy-before-write.c b/block/copy-before-write.c
+index adb27649a8..a5bb4d14f6 100644
+--- a/block/copy-before-write.c
++++ b/block/copy-before-write.c
+@@ -27,6 +27,7 @@
+ #include "qapi/qmp/qjson.h"
+ 
+ #include "sysemu/block-backend.h"
++#include "qemu/atomic.h"
+ #include "qemu/cutils.h"
+ #include "qapi/error.h"
+ #include "block/block_int.h"
+@@ -75,7 +76,8 @@ typedef struct BDRVCopyBeforeWriteState {
+      * @snapshot_error is normally zero. But on first copy-before-write failure
+      * when @on_cbw_error == ON_CBW_ERROR_BREAK_SNAPSHOT, @snapshot_error takes
+      * value of this error (<0). After that all in-flight and further
+-     * snapshot-API requests will fail with that error.
++     * snapshot-API requests will fail with that error. To be accessed with
++     * atomics.
+      */
+     int snapshot_error;
+ } BDRVCopyBeforeWriteState;
+@@ -115,7 +117,7 @@ static coroutine_fn int cbw_do_copy_before_write(BlockDriverState *bs,
+         return 0;
+     }
+ 
+-    if (s->snapshot_error) {
++    if (qatomic_read(&s->snapshot_error)) {
+         return 0;
+     }
+ 
+@@ -139,9 +141,7 @@ static coroutine_fn int cbw_do_copy_before_write(BlockDriverState *bs,
+     WITH_QEMU_LOCK_GUARD(&s->lock) {
+         if (ret < 0) {
+             assert(s->on_cbw_error == ON_CBW_ERROR_BREAK_SNAPSHOT);
+-            if (!s->snapshot_error) {
+-                s->snapshot_error = ret;
+-            }
++            qatomic_cmpxchg(&s->snapshot_error, 0, ret);
+         } else {
+             bdrv_set_dirty_bitmap(s->done_bitmap, off, end - off);
+         }
+@@ -215,7 +215,7 @@ cbw_snapshot_read_lock(BlockDriverState *bs, int64_t offset, int64_t bytes,
+ 
+     QEMU_LOCK_GUARD(&s->lock);
+ 
+-    if (s->snapshot_error) {
++    if (qatomic_read(&s->snapshot_error)) {
+         g_free(req);
+         return NULL;
+     }
+@@ -586,6 +586,12 @@ void bdrv_cbw_drop(BlockDriverState *bs)
+     bdrv_unref(bs);
+ }
+ 
++int bdrv_cbw_snapshot_error(BlockDriverState *bs)
++{
++    BDRVCopyBeforeWriteState *s = bs->opaque;
++    return qatomic_read(&s->snapshot_error);
++}
++
+ static void cbw_init(void)
+ {
+     bdrv_register(&bdrv_cbw_filter);
+diff --git a/block/copy-before-write.h b/block/copy-before-write.h
+index dc6cafe7fa..a27d2d7d9f 100644
+--- a/block/copy-before-write.h
++++ b/block/copy-before-write.h
+@@ -44,5 +44,6 @@ BlockDriverState *bdrv_cbw_append(BlockDriverState *source,
+                                   BlockCopyState **bcs,
+                                   Error **errp);
+ void bdrv_cbw_drop(BlockDriverState *bs);
++int bdrv_cbw_snapshot_error(BlockDriverState *bs);
+ 
+ #endif /* COPY_BEFORE_WRITE_H */
+diff --git a/pve-backup.c b/pve-backup.c
+index 0f098000dd..75da1dc051 100644
+--- a/pve-backup.c
++++ b/pve-backup.c
+@@ -374,6 +374,15 @@ static void pvebackup_complete_cb(void *opaque, int ret)
+         di->fleecing.snapshot_access = NULL;
+     }
+     if (di->fleecing.cbw) {
++        /*
++         * With fleecing, failure for cbw does not fail the guest write, but only sets the snapshot
++         * error, making further requests to the snapshot fail with EACCES, which then also fail the
++         * job. But that code is not the root cause and just confusing, so update it.
++         */
++        int snapshot_error = bdrv_cbw_snapshot_error(di->fleecing.cbw);
++        if (di->completed_ret == -EACCES && snapshot_error) {
++            di->completed_ret = snapshot_error;
++        }
+         bdrv_cbw_drop(di->fleecing.cbw);
+         di->fleecing.cbw = NULL;
+     }

debian/patches/pve/0047-PVE-whitelist-invalid-QAPI-names-for-backwards-compa.patch

@@ -1,32 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Stefan Reiter <s.reiter@proxmox.com>
-Date: Wed, 26 May 2021 15:26:30 +0200
-Subject: [PATCH] PVE: whitelist 'invalid' QAPI names for backwards compat
-
-Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
----
- qapi/pragma.json | 5 ++++-
- 1 file changed, 4 insertions(+), 1 deletion(-)
-
-diff --git a/qapi/pragma.json b/qapi/pragma.json
-index 7c91ea3685..c3888d654c 100644
---- a/qapi/pragma.json
-+++ b/qapi/pragma.json
-@@ -12,6 +12,7 @@
-         'device_add',
-         'device_del',
-         'expire_password',
-+        'get_link_status',
-         'migrate_cancel',
-         'netdev_add',
-         'netdev_del',
-@@ -60,6 +61,8 @@
-         'SysEmuTarget',             # query-cpu-fast, query-target
-         'UuidInfo',                 # query-uuid
-         'VncClientInfo',            # query-vnc, query-vnc-servers, ...
--        'X86CPURegister32'          # qom-get of x86 CPU properties
-+        'X86CPURegister32',         # qom-get of x86 CPU properties
-                                     # feature-words, filtered-features
-+        'BlockdevOptionsPbs',       # for PBS backwards compat
-+        'BalloonInfo'
-     ] } }

debian/patches/pve/0048-PVE-backup-fixup-error-handling-for-fleecing.patch

@@ -0,0 +1,103 @@
+From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
+From: Fiona Ebner <f.ebner@proxmox.com>
+Date: Thu, 7 Nov 2024 17:51:14 +0100
+Subject: [PATCH] PVE backup: fixup error handling for fleecing
+
+The drained section needs to be terminated before breaking out of the
+loop in the error scenarios. Otherwise, guest IO on the drive would
+become stuck.
+
+If the job is created successfully, then the job completion callback
+will clean up the snapshot access block nodes. In case failure
+happened before the job is created, there was no cleanup for the
+snapshot access block nodes yet. Add it.
+
+Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
+---
+ pve-backup.c | 38 +++++++++++++++++++++++++-------------
+ 1 file changed, 25 insertions(+), 13 deletions(-)
+
+diff --git a/pve-backup.c b/pve-backup.c
+index 75da1dc051..167f0b5c3f 100644
+--- a/pve-backup.c
++++ b/pve-backup.c
+@@ -357,22 +357,23 @@ static void coroutine_fn pvebackup_co_complete_stream(void *opaque)
+     qemu_co_mutex_unlock(&backup_state.backup_mutex);
+ }
+ 
+-static void pvebackup_complete_cb(void *opaque, int ret)
++static void cleanup_snapshot_access(PVEBackupDevInfo *di)
+ {
+-    PVEBackupDevInfo *di = opaque;
+-    di->completed_ret = ret;
+-
+-    /*
+-     * Handle block-graph specific cleanup (for fleecing) outside of the coroutine, because the work
+-     * won't be done as a coroutine anyways:
+-     * - For snapshot_access, allows doing bdrv_unref() directly. Doing it via bdrv_co_unref() would
+-     *   just spawn a BH calling bdrv_unref().
+-     * - For cbw, draining would need to spawn a BH.
+-     */
+     if (di->fleecing.snapshot_access) {
+         bdrv_unref(di->fleecing.snapshot_access);
+         di->fleecing.snapshot_access = NULL;
+     }
++    if (di->fleecing.cbw) {
++        bdrv_cbw_drop(di->fleecing.cbw);
++        di->fleecing.cbw = NULL;
++    }
++}
++
++static void pvebackup_complete_cb(void *opaque, int ret)
++{
++    PVEBackupDevInfo *di = opaque;
++    di->completed_ret = ret;
++
+     if (di->fleecing.cbw) {
+         /*
+          * With fleecing, failure for cbw does not fail the guest write, but only sets the snapshot
+@@ -383,10 +384,17 @@ static void pvebackup_complete_cb(void *opaque, int ret)
+         if (di->completed_ret == -EACCES && snapshot_error) {
+             di->completed_ret = snapshot_error;
+         }
+-        bdrv_cbw_drop(di->fleecing.cbw);
+-        di->fleecing.cbw = NULL;
+     }
+ 
++    /*
++     * Handle block-graph specific cleanup (for fleecing) outside of the coroutine, because the work
++     * won't be done as a coroutine anyways:
++     * - For snapshot_access, allows doing bdrv_unref() directly. Doing it via bdrv_co_unref() would
++     *   just spawn a BH calling bdrv_unref().
++     * - For cbw, draining would need to spawn a BH.
++     */
++    cleanup_snapshot_access(di);
++
+     /*
+      * Needs to happen outside of coroutine, because it takes the graph write lock.
+      */
+@@ -587,6 +595,7 @@ static void create_backup_jobs_bh(void *opaque) {
+             if (!di->fleecing.cbw) {
+                 error_setg(errp, "appending cbw node for fleecing failed: %s",
+                            local_err ? error_get_pretty(local_err) : "unknown error");
++                bdrv_drained_end(di->bs);
+                 break;
+             }
+ 
+@@ -599,6 +608,8 @@ static void create_backup_jobs_bh(void *opaque) {
+             if (!di->fleecing.snapshot_access) {
+                 error_setg(errp, "setting up snapshot access for fleecing failed: %s",
+                            local_err ? error_get_pretty(local_err) : "unknown error");
++                cleanup_snapshot_access(di);
++                bdrv_drained_end(di->bs);
+                 break;
+             }
+             source_bs = di->fleecing.snapshot_access;
+@@ -637,6 +648,7 @@ static void create_backup_jobs_bh(void *opaque) {
+         }
+ 
+         if (!job || local_err) {
++            cleanup_snapshot_access(di);
+             error_setg(errp, "backup_job_create failed: %s",
+                        local_err ? error_get_pretty(local_err) : "null");
+             break;

debian/patches/pve/0048-PVE-savevm-async-register-yank-before-migration_inco.patch

@@ -1,34 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Stefan Reiter <s.reiter@proxmox.com>
-Date: Wed, 26 May 2021 17:36:55 +0200
-Subject: [PATCH] PVE: savevm-async: register yank before
- migration_incoming_state_destroy
-
-Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
----
- migration/savevm-async.c | 5 +++++
- 1 file changed, 5 insertions(+)
-
-diff --git a/migration/savevm-async.c b/migration/savevm-async.c
-index 970ee3b3fc..b3ccc069f1 100644
---- a/migration/savevm-async.c
-+++ b/migration/savevm-async.c
-@@ -19,6 +19,7 @@
- #include "qemu/timer.h"
- #include "qemu/main-loop.h"
- #include "qemu/rcu.h"
-+#include "qemu/yank.h"
- 
- /* #define DEBUG_SAVEVM_STATE */
- 
-@@ -580,6 +581,10 @@ int load_snapshot_from_blockdev(const char *filename, Error **errp)
-     dirty_bitmap_mig_before_vm_start();
- 
-     qemu_fclose(f);
-+
-+    /* state_destroy assumes a real migration which would have added a yank */
-+    yank_register_instance(MIGRATION_YANK_INSTANCE, &error_abort);
-+
-     migration_incoming_state_destroy();
-     if (ret < 0) {
-         error_setg_errno(errp, -ret, "Error while loading VM state");

debian/patches/pve/0049-PVE-backup-factor-out-setting-up-snapshot-access-for.patch

@@ -0,0 +1,135 @@
+From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
+From: Fiona Ebner <f.ebner@proxmox.com>
+Date: Thu, 7 Nov 2024 17:51:15 +0100
+Subject: [PATCH] PVE backup: factor out setting up snapshot access for
+ fleecing
+
+Avoids some line bloat in the create_backup_jobs_bh() function and is
+in preparation for setting up the snapshot access independently of
+fleecing, in particular that will be useful for providing access to
+the snapshot via NBD.
+
+Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
+---
+ pve-backup.c | 95 ++++++++++++++++++++++++++++++++--------------------
+ 1 file changed, 58 insertions(+), 37 deletions(-)
+
+diff --git a/pve-backup.c b/pve-backup.c
+index 167f0b5c3f..f136d004c4 100644
+--- a/pve-backup.c
++++ b/pve-backup.c
+@@ -525,6 +525,62 @@ static int coroutine_fn pvebackup_co_add_config(
+     goto out;
+ }
+ 
++/*
++ * Setup a snapshot-access block node for a device with associated fleecing image.
++ */
++static int setup_snapshot_access(PVEBackupDevInfo *di, Error **errp)
++{
++    Error *local_err = NULL;
++
++    if (!di->fleecing.bs) {
++        error_setg(errp, "no associated fleecing image");
++        return -1;
++    }
++
++    QDict *cbw_opts = qdict_new();
++    qdict_put_str(cbw_opts, "driver", "copy-before-write");
++    qdict_put_str(cbw_opts, "file", bdrv_get_node_name(di->bs));
++    qdict_put_str(cbw_opts, "target", bdrv_get_node_name(di->fleecing.bs));
++
++    if (di->bitmap) {
++        /*
++         * Only guest writes to parts relevant for the backup need to be intercepted with
++         * old data being copied to the fleecing image.
++         */
++        qdict_put_str(cbw_opts, "bitmap.node", bdrv_get_node_name(di->bs));
++        qdict_put_str(cbw_opts, "bitmap.name", bdrv_dirty_bitmap_name(di->bitmap));
++    }
++    /*
++     * Fleecing storage is supposed to be fast and it's better to break backup than guest
++     * writes. Certain guest drivers like VirtIO-win have 60 seconds timeout by default, so
++     * abort a bit before that.
++     */
++    qdict_put_str(cbw_opts, "on-cbw-error", "break-snapshot");
++    qdict_put_int(cbw_opts, "cbw-timeout", 45);
++
++    di->fleecing.cbw = bdrv_insert_node(di->bs, cbw_opts, BDRV_O_RDWR, &local_err);
++
++    if (!di->fleecing.cbw) {
++        error_setg(errp, "appending cbw node for fleecing failed: %s",
++                   local_err ? error_get_pretty(local_err) : "unknown error");
++        return -1;
++    }
++
++    QDict *snapshot_access_opts = qdict_new();
++    qdict_put_str(snapshot_access_opts, "driver", "snapshot-access");
++    qdict_put_str(snapshot_access_opts, "file", bdrv_get_node_name(di->fleecing.cbw));
++
++    di->fleecing.snapshot_access =
++        bdrv_open(NULL, NULL, snapshot_access_opts, BDRV_O_RDWR | BDRV_O_UNMAP, &local_err);
++    if (!di->fleecing.snapshot_access) {
++        error_setg(errp, "setting up snapshot access for fleecing failed: %s",
++                   local_err ? error_get_pretty(local_err) : "unknown error");
++        return -1;
++    }
++
++    return 0;
++}
++
+ /*
+  * backup_job_create can *not* be run from a coroutine, so this can't either.
+  * The caller is responsible that backup_mutex is held nonetheless.
+@@ -569,49 +625,14 @@ static void create_backup_jobs_bh(void *opaque) {
+         const char *job_id = bdrv_get_device_name(di->bs);
+         bdrv_graph_co_rdunlock();
+         if (di->fleecing.bs) {
+-            QDict *cbw_opts = qdict_new();
+-            qdict_put_str(cbw_opts, "driver", "copy-before-write");
+-            qdict_put_str(cbw_opts, "file", bdrv_get_node_name(di->bs));
+-            qdict_put_str(cbw_opts, "target", bdrv_get_node_name(di->fleecing.bs));
+-
+-            if (di->bitmap) {
+-                /*
+-                 * Only guest writes to parts relevant for the backup need to be intercepted with
+-                 * old data being copied to the fleecing image.
+-                 */
+-                qdict_put_str(cbw_opts, "bitmap.node", bdrv_get_node_name(di->bs));
+-                qdict_put_str(cbw_opts, "bitmap.name", bdrv_dirty_bitmap_name(di->bitmap));
+-            }
+-            /*
+-             * Fleecing storage is supposed to be fast and it's better to break backup than guest
+-             * writes. Certain guest drivers like VirtIO-win have 60 seconds timeout by default, so
+-             * abort a bit before that.
+-             */
+-            qdict_put_str(cbw_opts, "on-cbw-error", "break-snapshot");
+-            qdict_put_int(cbw_opts, "cbw-timeout", 45);
+-
+-            di->fleecing.cbw = bdrv_insert_node(di->bs, cbw_opts, BDRV_O_RDWR, &local_err);
+-
+-            if (!di->fleecing.cbw) {
+-                error_setg(errp, "appending cbw node for fleecing failed: %s",
+-                           local_err ? error_get_pretty(local_err) : "unknown error");
+-                bdrv_drained_end(di->bs);
+-                break;
+-            }
+-
+-            QDict *snapshot_access_opts = qdict_new();
+-            qdict_put_str(snapshot_access_opts, "driver", "snapshot-access");
+-            qdict_put_str(snapshot_access_opts, "file", bdrv_get_node_name(di->fleecing.cbw));
+-
+-            di->fleecing.snapshot_access =
+-                bdrv_open(NULL, NULL, snapshot_access_opts, BDRV_O_RDWR | BDRV_O_UNMAP, &local_err);
+-            if (!di->fleecing.snapshot_access) {
++            if (setup_snapshot_access(di, &local_err) < 0) {
+                 error_setg(errp, "setting up snapshot access for fleecing failed: %s",
+                            local_err ? error_get_pretty(local_err) : "unknown error");
+                 cleanup_snapshot_access(di);
+                 bdrv_drained_end(di->bs);
+                 break;
+             }
++
+             source_bs = di->fleecing.snapshot_access;
+             discard_source = true;
+ 

debian/patches/pve/0050-PVE-backup-save-device-name-in-device-info-structure.patch

@@ -0,0 +1,135 @@
+From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
+From: Fiona Ebner <f.ebner@proxmox.com>
+Date: Thu, 7 Nov 2024 17:51:16 +0100
+Subject: [PATCH] PVE backup: save device name in device info structure
+
+The device name needs to be queried while holding the graph read lock
+and since it doesn't change during the whole operation, just get it
+once during setup and avoid the need to query it again in different
+places.
+
+Also in preparation to use it more often in error messages and for the
+upcoming external backup access API.
+
+Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
+---
+ pve-backup.c | 29 +++++++++++++++--------------
+ 1 file changed, 15 insertions(+), 14 deletions(-)
+
+diff --git a/pve-backup.c b/pve-backup.c
+index f136d004c4..8ccb281c8c 100644
+--- a/pve-backup.c
++++ b/pve-backup.c
+@@ -94,6 +94,7 @@ typedef struct PVEBackupDevInfo {
+     size_t size;
+     uint64_t block_size;
+     uint8_t dev_id;
++    char* device_name;
+     int completed_ret; // INT_MAX if not completed
+     BdrvDirtyBitmap *bitmap;
+     BlockDriverState *target;
+@@ -327,6 +328,8 @@ static void coroutine_fn pvebackup_co_complete_stream(void *opaque)
+     }
+ 
+     di->bs = NULL;
++    g_free(di->device_name);
++    di->device_name = NULL;
+ 
+     assert(di->target == NULL);
+ 
+@@ -621,9 +624,6 @@ static void create_backup_jobs_bh(void *opaque) {
+ 
+         BlockDriverState *source_bs = di->bs;
+         bool discard_source = false;
+-        bdrv_graph_co_rdlock();
+-        const char *job_id = bdrv_get_device_name(di->bs);
+-        bdrv_graph_co_rdunlock();
+         if (di->fleecing.bs) {
+             if (setup_snapshot_access(di, &local_err) < 0) {
+                 error_setg(errp, "setting up snapshot access for fleecing failed: %s",
+@@ -654,7 +654,7 @@ static void create_backup_jobs_bh(void *opaque) {
+         }
+ 
+         BlockJob *job = backup_job_create(
+-            job_id, source_bs, di->target, backup_state.speed, sync_mode, di->bitmap,
++            di->device_name, source_bs, di->target, backup_state.speed, sync_mode, di->bitmap,
+             bitmap_mode, false, discard_source, NULL, &perf, BLOCKDEV_ON_ERROR_REPORT,
+             BLOCKDEV_ON_ERROR_REPORT, JOB_DEFAULT, pvebackup_complete_cb, di, backup_state.txn,
+             &local_err);
+@@ -751,6 +751,7 @@ static GList coroutine_fn GRAPH_RDLOCK *get_device_info(
+             }
+             PVEBackupDevInfo *di = g_new0(PVEBackupDevInfo, 1);
+             di->bs = bs;
++            di->device_name = g_strdup(bdrv_get_device_name(bs));
+ 
+             if (fleecing && device_uses_fleecing(*d)) {
+                 g_autofree gchar *fleecing_devid = g_strconcat(*d, "-fleecing", NULL);
+@@ -789,6 +790,7 @@ static GList coroutine_fn GRAPH_RDLOCK *get_device_info(
+ 
+             PVEBackupDevInfo *di = g_new0(PVEBackupDevInfo, 1);
+             di->bs = bs;
++            di->device_name = g_strdup(bdrv_get_device_name(bs));
+             di_list = g_list_append(di_list, di);
+         }
+     }
+@@ -956,9 +958,6 @@ UuidInfo coroutine_fn *qmp_backup(
+ 
+             di->block_size = dump_cb_block_size;
+ 
+-            bdrv_graph_co_rdlock();
+-            const char *devname = bdrv_get_device_name(di->bs);
+-            bdrv_graph_co_rdunlock();
+             PBSBitmapAction action = PBS_BITMAP_ACTION_NOT_USED;
+             size_t dirty = di->size;
+ 
+@@ -973,7 +972,8 @@ UuidInfo coroutine_fn *qmp_backup(
+                     }
+                     action = PBS_BITMAP_ACTION_NEW;
+                 } else {
+-                    expect_only_dirty = proxmox_backup_check_incremental(pbs, devname, di->size) != 0;
++                    expect_only_dirty =
++                        proxmox_backup_check_incremental(pbs, di->device_name, di->size) != 0;
+                 }
+ 
+                 if (expect_only_dirty) {
+@@ -997,7 +997,8 @@ UuidInfo coroutine_fn *qmp_backup(
+                 }
+             }
+ 
+-            int dev_id = proxmox_backup_co_register_image(pbs, devname, di->size, expect_only_dirty, errp);
++            int dev_id = proxmox_backup_co_register_image(pbs, di->device_name, di->size,
++                                                          expect_only_dirty, errp);
+             if (dev_id < 0) {
+                 goto err_mutex;
+             }
+@@ -1009,7 +1010,7 @@ UuidInfo coroutine_fn *qmp_backup(
+             di->dev_id = dev_id;
+ 
+             PBSBitmapInfo *info = g_malloc(sizeof(*info));
+-            info->drive = g_strdup(devname);
++            info->drive = g_strdup(di->device_name);
+             info->action = action;
+             info->size = di->size;
+             info->dirty = dirty;
+@@ -1034,10 +1035,7 @@ UuidInfo coroutine_fn *qmp_backup(
+                 goto err_mutex;
+             }
+ 
+-            bdrv_graph_co_rdlock();
+-            const char *devname = bdrv_get_device_name(di->bs);
+-            bdrv_graph_co_rdunlock();
+-            di->dev_id = vma_writer_register_stream(vmaw, devname, di->size);
++            di->dev_id = vma_writer_register_stream(vmaw, di->device_name, di->size);
+             if (di->dev_id <= 0) {
+                 error_set(errp, ERROR_CLASS_GENERIC_ERROR,
+                           "register_stream failed");
+@@ -1148,6 +1146,9 @@ err:
+             bdrv_co_unref(di->target);
+         }
+ 
++        g_free(di->device_name);
++        di->device_name = NULL;
++
+         g_free(di);
+     }
+     g_list_free(di_list);

debian/patches/pve/0051-PVE-backup-include-device-name-in-error-when-setting.patch

@@ -0,0 +1,25 @@
+From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
+From: Fiona Ebner <f.ebner@proxmox.com>
+Date: Thu, 7 Nov 2024 17:51:17 +0100
+Subject: [PATCH] PVE backup: include device name in error when setting up
+ snapshot access fails
+
+Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
+---
+ pve-backup.c | 3 ++-
+ 1 file changed, 2 insertions(+), 1 deletion(-)
+
+diff --git a/pve-backup.c b/pve-backup.c
+index 8ccb281c8c..255465676c 100644
+--- a/pve-backup.c
++++ b/pve-backup.c
+@@ -626,7 +626,8 @@ static void create_backup_jobs_bh(void *opaque) {
+         bool discard_source = false;
+         if (di->fleecing.bs) {
+             if (setup_snapshot_access(di, &local_err) < 0) {
+-                error_setg(errp, "setting up snapshot access for fleecing failed: %s",
++                error_setg(errp, "%s - setting up snapshot access for fleecing failed: %s",
++                           di->device_name,
+                            local_err ? error_get_pretty(local_err) : "unknown error");
+                 cleanup_snapshot_access(di);
+                 bdrv_drained_end(di->bs);

debian/patches/pve/0052-adapt-machine-version-deprecation-for-Proxmox-VE.patch

@@ -0,0 +1,137 @@
+From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
+From: Fiona Ebner <f.ebner@proxmox.com>
+Date: Fri, 3 Jan 2025 14:03:12 +0100
+Subject: [PATCH] adapt machine version deprecation for Proxmox VE
+
+In commit a35f8577a0 ("include/hw: add macros for deprecation &
+removal of versioned machines"), a new machine version deprecation and
+removal policy was introduced. After only 3 years a machine version
+will be deprecated while being removed after 6 years.
+
+The deprecation is a bit early considering major PVE releases are
+approximately every 2 years. This means that a deprecation warning can
+already happen for a machine version that was introduced during the
+previous major release. This would scare users for no good reason, so
+avoid deprecating machine versions in PVE too early and define a
+baseline of machine versions that will be supported throughout a
+single major PVE release.
+
+Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
+---
+ include/hw/boards.h | 78 +++++++++++++++++++++++++++++----------------
+ 1 file changed, 51 insertions(+), 27 deletions(-)
+
+diff --git a/include/hw/boards.h b/include/hw/boards.h
+index 5cddeb7fcb..b1e7787499 100644
+--- a/include/hw/boards.h
++++ b/include/hw/boards.h
+@@ -607,42 +607,66 @@ struct MachineState {
+ 
+ 
+ /*
+- * How many years/major releases for each phase
+- * of the life cycle. Assumes use of versioning
+- * scheme where major is bumped each year
++ * Baseline of machine versions that are still considered supported throughout
++ * current major Proxmox VE release. Machine versions older than this are
++ * considered to be deprecated in Proxmox VE.
++ *
++ * Machine versions older than 6 years are removed just like in upstream QEMU.
++ * (policy takes effect with QEMU 10.1). Assumes yearly major QEMU release.
++ *
++ * QEMU release cylce N.0 in ~April, N.1 in ~August, N.2 in ~December
++ * Debian/PVE release cylce ~every two years in summer
++ *
++ * PVE - last QEMU - machine versions dropped - baseline
++ *   8         9.2              2.3 and older        2.4
++ *   9        11.2              5.2 and older        6.0
++ *  10        13.2              7.2 and older        8.0
++ */
++#define MACHINE_VER_BASELINE_PVE_MAJOR 2
++#define MACHINE_VER_BASELINE_PVE_MINOR 4
++#define MACHINE_VER_DELETION_MAJOR (QEMU_VERSION_MAJOR - 6)
++#define MACHINE_VER_DELETION_MINOR QEMU_VERSION_MINOR
++
++/*
++ * Proxmox VE needs to support the baseline throughout a major PVE release. So
++ * a QEMU release where the baseline is already deleted cannot be used.
++ * Removal policy after 6 years takes effect with QEMU 10.1.
+  */
+-#define MACHINE_VER_DELETION_MAJOR 6
+-#define MACHINE_VER_DEPRECATION_MAJOR 3
++#if ((QEMU_VERSION_MAJOR > 10) || ((QEMU_VERSION_MAJOR == 10) && (QEMU_VERSION_MINOR >= 1)))
++#if ((MACHINE_VER_BASELINE_PVE_MAJOR < MACHINE_VER_DELETION_MAJOR) || \
++     ((MACHINE_VER_BASELINE_PVE_MAJOR == MACHINE_VER_DELETION_MAJOR) && \
++      (MACHINE_VER_BASELINE_PVE_MINOR < MACHINE_VER_DELETION_MINOR)))
++#error "Baseline machine version needed by Proxmox VE not supported anymore by this QEMU release"
++#endif
++#endif
+ 
+ /*
+  * Expands to a static string containing a deprecation
+  * message for a versioned machine type
+  */
+ #define MACHINE_VER_DEPRECATION_MSG \
+-    "machines more than " stringify(MACHINE_VER_DEPRECATION_MAJOR) \
+-    " years old are subject to deletion after " \
+-    stringify(MACHINE_VER_DELETION_MAJOR) " years"
+-
+-#define _MACHINE_VER_IS_EXPIRED_IMPL(cutoff, major, minor) \
+-    (((QEMU_VERSION_MAJOR - major) > cutoff) || \
+-     (((QEMU_VERSION_MAJOR - major) == cutoff) && \
+-      (QEMU_VERSION_MINOR - minor) >= 0))
+-
+-#define _MACHINE_VER_IS_EXPIRED2(cutoff, major, minor) \
+-    _MACHINE_VER_IS_EXPIRED_IMPL(cutoff, major, minor)
+-#define _MACHINE_VER_IS_EXPIRED3(cutoff, major, minor, micro) \
+-    _MACHINE_VER_IS_EXPIRED_IMPL(cutoff, major, minor)
+-#define _MACHINE_VER_IS_EXPIRED4(cutoff, major, minor, _unused, tag) \
+-    _MACHINE_VER_IS_EXPIRED_IMPL(cutoff, major, minor)
+-#define _MACHINE_VER_IS_EXPIRED5(cutoff, major, minor, micro, _unused, tag)   \
+-    _MACHINE_VER_IS_EXPIRED_IMPL(cutoff, major, minor)
+-
+-#define _MACHINE_IS_EXPIRED(cutoff, ...) \
++    "old machine version is subject to deletion during current major Proxmox VE release"
++
++#define _MACHINE_VER_IS_EXPIRED_IMPL(baseline_major, baseline_minor, major, minor) \
++    ((major < baseline_major) || \
++     ((major == baseline_major) && \
++      (minor < baseline_minor)))
++
++#define _MACHINE_VER_IS_EXPIRED2(baseline_major, baseline_minor, major, minor) \
++    _MACHINE_VER_IS_EXPIRED_IMPL(baseline_major, baseline_minor, major, minor)
++#define _MACHINE_VER_IS_EXPIRED3(baseline_major, baseline_minor, major, minor, micro) \
++    _MACHINE_VER_IS_EXPIRED_IMPL(baseline_major, baseline_minor, major, minor)
++#define _MACHINE_VER_IS_EXPIRED4(baseline_major, baseline_minor, major, minor, _unused, tag) \
++    _MACHINE_VER_IS_EXPIRED_IMPL(baseline_major, baseline_minor, major, minor)
++#define _MACHINE_VER_IS_EXPIRED5(baseline_major, baseline_minor, major, minor, micro, _unused, tag)   \
++    _MACHINE_VER_IS_EXPIRED_IMPL(baseline_major, baseline_minor, major, minor)
++
++#define _MACHINE_IS_EXPIRED(baseline_major, baseline_minor, ...) \
+     _MACHINE_VER_PICK(__VA_ARGS__, \
+                       _MACHINE_VER_IS_EXPIRED5, \
+                       _MACHINE_VER_IS_EXPIRED4, \
+                       _MACHINE_VER_IS_EXPIRED3, \
+-                      _MACHINE_VER_IS_EXPIRED2) (cutoff, __VA_ARGS__)
++                      _MACHINE_VER_IS_EXPIRED2) (baseline_major, baseline_minor, __VA_ARGS__)
+ 
+ /*
+  * Evaluates true when a machine type with (major, minor)
+@@ -651,7 +675,7 @@ struct MachineState {
+  * lifecycle rules
+  */
+ #define MACHINE_VER_IS_DEPRECATED(...) \
+-    _MACHINE_IS_EXPIRED(MACHINE_VER_DEPRECATION_MAJOR, __VA_ARGS__)
++    _MACHINE_IS_EXPIRED(MACHINE_VER_BASELINE_PVE_MAJOR, MACHINE_VER_BASELINE_PVE_MINOR, __VA_ARGS__)
+ 
+ /*
+  * Evaluates true when a machine type with (major, minor)
+@@ -660,7 +684,7 @@ struct MachineState {
+  * lifecycle rules
+  */
+ #define MACHINE_VER_SHOULD_DELETE(...) \
+-    _MACHINE_IS_EXPIRED(MACHINE_VER_DELETION_MAJOR, __VA_ARGS__)
++    _MACHINE_IS_EXPIRED(MACHINE_VER_DELETION_MAJOR, MACHINE_VER_DELETION_MINOR, __VA_ARGS__)
+ 
+ /*
+  * Sets the deprecation reason for a versioned machine based

debian/patches/series

@@ -1,11 +1,9 @@
-extra/0001-qemu-sockets-fix-unix-socket-path-copy-again.patch
-extra/0002-monitor-qmp-fix-race-with-clients-disconnecting-earl.patch
-extra/0003-monitor-hmp-add-support-for-flag-argument-with-value.patch
-extra/0004-monitor-refactor-set-expire_password-and-allow-VNC-d.patch
-extra/0005-monitor-hmp-correctly-invert-password-argument-detec.patch
-extra/0006-qxl-fix-pre-save-logic.patch
-extra/0007-block-mirror-fix-NULL-pointer-dereference-in-mirror_.patch
-extra/0008-block-introduce-max_hw_iov-for-use-in-scsi-generic.patch
+extra/0001-monitor-qmp-fix-race-with-clients-disconnecting-earl.patch
+extra/0002-scsi-megasas-Internal-cdbs-have-16-byte-length.patch
+extra/0003-ide-avoid-potential-deadlock-when-draining-during-tr.patch
+extra/0004-Revert-x86-acpi-workaround-Windows-not-handling-name.patch
+extra/0005-virtio-net-Add-queues-before-loading-them.patch
+extra/0006-virtio-net-Fix-size-check-in-dhclient-workaround.patch
 bitmap-mirror/0001-drive-mirror-add-support-for-sync-bitmap-mode-never.patch
 bitmap-mirror/0002-drive-mirror-add-support-for-conditional-and-always-.patch
 bitmap-mirror/0003-mirror-add-check-for-bitmap-mode-without-bitmap.patch
@@ -18,45 +16,49 @@ pve/0003-PVE-Config-set-the-CPU-model-to-kvm64-32-instead-of-.patch
 pve/0004-PVE-Config-ui-spice-default-to-pve-certificates.patch
 pve/0005-PVE-Config-glusterfs-no-default-logfile-if-daemonize.patch
 pve/0006-PVE-Config-rbd-block-rbd-disable-rbd_cache_writethro.patch
-pve/0007-PVE-Up-qmp-add-get_link_status.patch
-pve/0008-PVE-Up-glusterfs-allow-partial-reads.patch
-pve/0009-PVE-Up-qemu-img-return-success-on-info-without-snaps.patch
-pve/0010-PVE-Up-qemu-img-dd-add-osize-and-read-from-to-stdin-.patch
-pve/0011-PVE-Up-qemu-img-dd-add-isize-parameter.patch
-pve/0012-PVE-Up-qemu-img-dd-add-n-skip_create.patch
+pve/0007-PVE-Up-glusterfs-allow-partial-reads.patch
+pve/0008-PVE-Up-qemu-img-return-success-on-info-without-snaps.patch
+pve/0009-PVE-Up-qemu-img-dd-add-osize-and-read-from-to-stdin-.patch
+pve/0010-PVE-Up-qemu-img-dd-add-isize-parameter.patch
+pve/0011-PVE-Up-qemu-img-dd-add-n-skip_create.patch
+pve/0012-qemu-img-dd-add-l-option-for-loading-a-snapshot.patch
 pve/0013-PVE-virtio-balloon-improve-query-balloon.patch
 pve/0014-PVE-qapi-modify-query-machines.patch
 pve/0015-PVE-qapi-modify-spice-query.patch
-pve/0016-PVE-add-savevm-async-for-background-state-snapshots.patch
-pve/0017-PVE-add-optional-buffer-size-to-QEMUFile.patch
-pve/0018-PVE-block-add-the-zeroinit-block-driver-filter.patch
-pve/0019-PVE-Add-dummy-id-command-line-parameter.patch
-pve/0020-PVE-Config-Revert-target-i386-disable-LINT0-after-re.patch
-pve/0021-PVE-Up-Config-file-posix-make-locking-optiono-on-cre.patch
-pve/0022-PVE-monitor-disable-oob-capability.patch
-pve/0023-PVE-Compat-4.0-used-balloon-qemu-4-0-config-size-fal.patch
-pve/0024-PVE-Allow-version-code-in-machine-type.patch
-pve/0025-PVE-Backup-add-vma-backup-format-code.patch
-pve/0026-PVE-Backup-add-backup-dump-block-driver.patch
-pve/0027-PVE-Backup-proxmox-backup-patches-for-qemu.patch
-pve/0028-PVE-Backup-pbs-restore-new-command-to-restore-from-p.patch
-pve/0029-PVE-Backup-Add-dirty-bitmap-tracking-for-incremental.patch
-pve/0030-PVE-various-PBS-fixes.patch
-pve/0031-PVE-Add-PBS-block-driver-to-map-backup-archives-into.patch
-pve/0032-PVE-add-query_proxmox_support-QMP-command.patch
-pve/0033-PVE-add-query-pbs-bitmap-info-QMP-call.patch
-pve/0034-PVE-redirect-stderr-to-journal-when-daemonized.patch
-pve/0035-PVE-Add-sequential-job-transaction-support.patch
-pve/0036-PVE-Backup-Use-a-transaction-to-synchronize-job-stat.patch
-pve/0037-PVE-Backup-Don-t-block-on-finishing-and-cleanup-crea.patch
-pve/0038-PVE-Migrate-dirty-bitmap-state-via-savevm.patch
-pve/0039-migration-block-dirty-bitmap-migrate-other-bitmaps-e.patch
-pve/0040-PVE-fall-back-to-open-iscsi-initiatorname.patch
-pve/0041-PVE-Use-coroutine-QMP-for-backup-cancel_backup.patch
-pve/0042-PBS-add-master-key-support.patch
-pve/0043-PVE-block-pbs-fast-path-reads-without-allocation-if-.patch
-pve/0044-PVE-block-stream-increase-chunk-size.patch
-pve/0045-block-io-accept-NULL-qiov-in-bdrv_pad_request.patch
-pve/0046-block-add-alloc-track-driver.patch
-pve/0047-PVE-whitelist-invalid-QAPI-names-for-backwards-compa.patch
-pve/0048-PVE-savevm-async-register-yank-before-migration_inco.patch
+pve/0016-PVE-add-IOChannel-implementation-for-savevm-async.patch
+pve/0017-PVE-add-savevm-async-for-background-state-snapshots.patch
+pve/0018-PVE-add-optional-buffer-size-to-QEMUFile.patch
+pve/0019-PVE-block-add-the-zeroinit-block-driver-filter.patch
+pve/0020-PVE-Add-dummy-id-command-line-parameter.patch
+pve/0021-PVE-Config-Revert-target-i386-disable-LINT0-after-re.patch
+pve/0022-PVE-Up-Config-file-posix-make-locking-optiono-on-cre.patch
+pve/0023-PVE-monitor-disable-oob-capability.patch
+pve/0024-PVE-Compat-4.0-used-balloon-qemu-4-0-config-size-fal.patch
+pve/0025-PVE-Allow-version-code-in-machine-type.patch
+pve/0026-block-backup-move-bcs-bitmap-initialization-to-job-c.patch
+pve/0027-PVE-Backup-add-vma-backup-format-code.patch
+pve/0028-PVE-Backup-add-backup-dump-block-driver.patch
+pve/0029-PVE-Add-sequential-job-transaction-support.patch
+pve/0030-PVE-Backup-Proxmox-backup-patches-for-QEMU.patch
+pve/0031-PVE-Backup-pbs-restore-new-command-to-restore-from-p.patch
+pve/0032-PVE-Add-PBS-block-driver-to-map-backup-archives-into.patch
+pve/0033-PVE-redirect-stderr-to-journal-when-daemonized.patch
+pve/0034-PVE-Migrate-dirty-bitmap-state-via-savevm.patch
+pve/0035-migration-block-dirty-bitmap-migrate-other-bitmaps-e.patch
+pve/0036-PVE-fall-back-to-open-iscsi-initiatorname.patch
+pve/0037-PVE-block-stream-increase-chunk-size.patch
+pve/0038-block-add-alloc-track-driver.patch
+pve/0039-Revert-block-rbd-workaround-for-ceph-issue-53784.patch
+pve/0040-Revert-block-rbd-fix-handling-of-holes-in-.bdrv_co_b.patch
+pve/0041-Revert-block-rbd-implement-bdrv_co_block_status.patch
+pve/0042-alloc-track-error-out-when-auto-remove-is-not-set.patch
+pve/0043-alloc-track-avoid-seemingly-superfluous-child-permis.patch
+pve/0044-copy-before-write-allow-specifying-minimum-cluster-s.patch
+pve/0045-backup-add-minimum-cluster-size-to-performance-optio.patch
+pve/0046-PVE-backup-add-fleecing-option.patch
+pve/0047-PVE-backup-improve-error-when-copy-before-write-fail.patch
+pve/0048-PVE-backup-fixup-error-handling-for-fleecing.patch
+pve/0049-PVE-backup-factor-out-setting-up-snapshot-access-for.patch
+pve/0050-PVE-backup-save-device-name-in-device-info-structure.patch
+pve/0051-PVE-backup-include-device-name-in-error-when-setting.patch
+pve/0052-adapt-machine-version-deprecation-for-Proxmox-VE.patch

debian/pve-qemu-kvm.install

@@ -1,7 +1,6 @@
-# install the userspace utilities
-debian/kvm-ifup etc/kvm/
-debian/kvm-ifdown etc/kvm/
-
 #install ovmf uefi rom
 debian/OVMF_CODE-pure-efi.fd usr/share/kvm/
 debian/OVMF_VARS-pure-efi.fd usr/share/kvm/
+debian/kvm-ifdown etc/kvm/
+# install the userspace utilities
+debian/kvm-ifup etc/kvm/

debian/pve-qemu-kvm.links

@@ -1,16 +1,13 @@
-usr/bin/qemu-system-x86_64 usr/bin/kvm
-
-# qemu-system-i386 and qemu-system-x86_64 provides the same hardware emulation
-usr/bin/qemu-system-x86_64 usr/bin/qemu-system-i386
-
 # also use aarch64 for 32 bit arm
 usr/bin/qemu-system-aarch64 usr/bin/qemu-system-arm
-
+usr/bin/qemu-system-x86_64 usr/bin/kvm
+# qemu-system-i386 and qemu-system-x86_64 provides the same hardware emulation
+usr/bin/qemu-system-x86_64 usr/bin/qemu-system-i386
 # upstream provides a qemu man page,
 # we symlink to kvm for backward compatibility
 # and to qemu-system-{i386,x86_64} to fullfill our 'Provides: qemu-system-x86'
 usr/share/man/man1/qemu.1  usr/share/man/man1/kvm.1
+usr/share/man/man1/qemu.1  usr/share/man/man1/qemu-system-aarch64.1
+usr/share/man/man1/qemu.1  usr/share/man/man1/qemu-system-arm.1
 usr/share/man/man1/qemu.1  usr/share/man/man1/qemu-system-i386.1
 usr/share/man/man1/qemu.1  usr/share/man/man1/qemu-system-x86_64.1
-usr/share/man/man1/qemu.1  usr/share/man/man1/qemu-system-arm.1
-usr/share/man/man1/qemu.1  usr/share/man/man1/qemu-system-aarch64.1

debian/pve-qemu-kvm.lintian-overrides

@@ -1,4 +1,7 @@
-pve-qemu-kvm: arch-dependent-file-in-usr-share usr/share/kvm/hppa-firmware.img
-pve-qemu-kvm: binary-from-other-architecture usr/share/kvm/hppa-firmware.img
-pve-qemu-kvm: unstripped-binary-or-object usr/share/kvm/hppa-firmware.img
-pve-qemu-kvm: statically-linked-binary usr/share/kvm/hppa-firmware.img
+pve-qemu-kvm: arch-dependent-file-in-usr-share [usr/share/kvm/hppa-firmware.img]
+pve-qemu-kvm: binary-from-other-architecture [usr/share/kvm/hppa-firmware.img]
+pve-qemu-kvm: embedded-javascript-library please use * [usr/share/doc/pve-qemu-kvm/kvm/_static/*]
+pve-qemu-kvm: groff-message *: warning [*]: can't break line [usr/share/man/*]
+pve-qemu-kvm: groff-message *: warning [*]: cannot adjust line [usr/share/man/*]
+pve-qemu-kvm: statically-linked-binary [usr/share/kvm/hppa-firmware.img]
+pve-qemu-kvm: unstripped-binary-or-object [usr/share/kvm/hppa-firmware.img]

debian/rules

@@ -1,22 +1,12 @@
 #!/usr/bin/make -f
 # -*- makefile -*-
-# Sample debian/rules that uses debhelper.
-# This file was originally written by Joey Hess and Craig Small.
-# As a special exception, when this file is copied by dh-make into a
-# dh-make output file, you may use that output file without restriction.
-# This special exception was added by Craig Small in version 0.37 of dh-make.
 
 # Uncomment this to turn on verbose mode.
 #export DH_VERBOSE=1
 
-include /usr/share/dpkg/pkg-info.mk
+include /usr/share/dpkg/default.mk
 
-# These are used for cross-compiling and for saving the configure script
-# from having to guess our platform (since we know it already)
-DEB_HOST_GNU_TYPE   ?= $(shell dpkg-architecture -qDEB_HOST_GNU_TYPE)
-DEB_BUILD_GNU_TYPE  ?= $(shell dpkg-architecture -qDEB_BUILD_GNU_TYPE)
-
-ARCH ?= $(shell dpkg-architecture -qDEB_HOST_GNU_CPU)
+HOST_CPU ?= $(DEB_HOST_GNU_CPU)
 
 PACKAGE=pve-qemu-kvm
 destdir := $(CURDIR)/debian/$(PACKAGE)
@@ -27,58 +17,70 @@ machinefile := $(destdir)/usr/share/kvm/machine-versions-x86_64.json
 # default QEMU out-of-tree build directory is ./build
 BUILDDIR=build
 
-CFLAGS = -Wall
+# FIXME: pass to configure as --extra-cflags=CFLAGS ?! also LDFLAGS?
+CFLAGS += -Wall
 
-ifneq (,$(findstring noopt,$(DEB_BUILD_OPTIONS)))
-	CFLAGS += -O0
-else
-	CFLAGS += -O2
-endif
+export CFLAGS
+
+# DEB_BUILD_OPTIONS=parallel=N
+MAKEFLAGS += $(subst parallel=,-j,$(filter parallel=%,${DEB_BUILD_OPTIONS}))
 
 ${BUILDDIR}/config.status: configure
 	dh_testdir
 	# Add here commands to configure the package.
 
+ifneq "$(wildcard /usr/share/misc/config.sub)" ""
+	cp -f /usr/share/misc/config.sub config.sub
+endif
+ifneq "$(wildcard /usr/share/misc/config.guess)" ""
+	cp -f /usr/share/misc/config.guess config.guess
+endif
+
 	# guest-agent is only required for guest systems
 	./configure \
-	--with-git-submodules=ignore \
-	--docdir=/usr/share/doc/pve-qemu-kvm \
-	--localstatedir=/var \
-	--prefix=/usr \
-	--sysconfdir=/etc \
-	--target-list=$(ARCH)-softmmu,aarch64-softmmu \
-	--with-suffix="kvm" \
-	--with-pkgversion="${DEB_SOURCE}_${DEB_VERSION_UPSTREAM}" \
-	--audio-drv-list="alsa" \
-	--datadir=/usr/share \
-	--libexecdir=/usr/lib/kvm \
-	--disable-capstone \
-	--disable-gtk \
-	--disable-guest-agent \
-	--disable-guest-agent-msi \
-	--disable-libnfs \
-	--disable-libxml2 \
-	--disable-sdl \
-	--disable-smartcard \
-	--disable-strip \
-	--disable-xen \
-	--enable-curl \
-	--enable-docs \
-	--enable-glusterfs \
-	--enable-gnutls \
-	--enable-libiscsi \
-	--enable-libusb \
-	--enable-linux-aio \
-	--enable-linux-io-uring \
-	--enable-numa \
-	--enable-rbd \
-	--enable-seccomp \
-	--enable-spice \
-	--enable-usb-redir \
-	--enable-virtfs \
-	--enable-virtiofsd \
-	--enable-xfsctl
+	    --disable-download \
+	    --docdir=/usr/share/doc/pve-qemu-kvm \
+	    --localstatedir=/var \
+	    --prefix=/usr \
+	    --sysconfdir=/etc \
+	    --target-list=$(HOST_CPU)-softmmu,aarch64-softmmu \
+	    --with-suffix="kvm" \
+	    --with-pkgversion="${DEB_SOURCE}_${DEB_VERSION_UPSTREAM_REVISION}" \
+	    --audio-drv-list="alsa" \
+	    --datadir=/usr/share \
+	    --libexecdir=/usr/lib/kvm \
+	    --disable-capstone \
+	    --disable-gtk \
+	    --disable-guest-agent \
+	    --disable-guest-agent-msi \
+	    --disable-libnfs \
+	    --disable-libssh \
+	    --disable-sdl \
+	    --disable-smartcard \
+	    --disable-strip \
+	    --disable-xen \
+	    --enable-curl \
+	    --enable-docs \
+	    --enable-glusterfs \
+	    --enable-gnutls \
+	    --enable-libiscsi \
+	    --enable-libusb \
+	    --enable-linux-aio \
+	    --enable-linux-io-uring \
+	    --enable-numa \
+	    --enable-opengl \
+	    --enable-rbd \
+	    --enable-seccomp \
+	    --enable-slirp \
+	    --enable-spice \
+	    --enable-usb-redir \
+	    --enable-virglrenderer \
+	    --enable-virtfs \
+	    --enable-zstd
 
+build: build-arch build-indep
+build-arch: build-stamp
+build-indep: build-stamp
 build: build-stamp
 
 build-stamp: ${BUILDDIR}/config.status
@@ -96,15 +98,8 @@ clean:
 	dh_testroot
 	rm -f build-stamp
 
-	# Add here commands to clean up after the build process.
+	# Add here commands to clean up before the build process.
 	-$(MAKE) distclean
-ifneq "$(wildcard /usr/share/misc/config.sub)" ""
-	cp -f /usr/share/misc/config.sub config.sub
-endif
-ifneq "$(wildcard /usr/share/misc/config.guess)" ""
-	cp -f /usr/share/misc/config.guess config.guess
-endif
-
 
 	dh_clean
 
@@ -118,21 +113,6 @@ install: build
 	# Add here commands to install the package into debian/pve-kvm.
 	$(MAKE) DESTDIR=$(destdir) install
 
-	# we do not need openbios files (sparc/ppc)
-	rm -rf $(destdir)/usr/share/kvm/openbios-*
-	# remove ppc files
-	rm $(destdir)/usr/share/kvm/*.dtb
-	rm $(destdir)/usr/share/kvm/s390-ccw.img
-	rm $(destdir)/usr/share/kvm/s390-netboot.img
-	rm $(destdir)/usr/share/kvm/qemu_vga.ndrv
-	rm $(destdir)/usr/share/kvm/slof.bin
-	rm $(destdir)/usr/share/kvm/u-boot.e500
-	# remove Alpha files
-	rm $(destdir)/usr/share/kvm/palcode-clipper
-	# remove RISC-V files
-	rm $(destdir)/usr/share/kvm/opensbi-riscv32-generic-fw_dynamic.elf
-	rm $(destdir)/usr/share/kvm/opensbi-riscv64-generic-fw_dynamic.elf
-
 	# Remove things we don't package at all, would be a "kvm-dev" package
 	rm -Rf $(destdir)/usr/include/linux/
 	rm -Rf $(destdir)/usr/include
@@ -168,7 +148,7 @@ binary-arch: build install
 #	dh_installinfo
 	dh_installman
 	dh_link
-	dh_strip --dbg-package=pve-qemu-kvm-dbg
+	dh_strip --dbgsym-migration='pve-qemu-kvm-dbg (<<8.0.0-1~)'
 	dh_compress
 	dh_fixperms
 #	dh_perl

debian/source/include-binaries

@@ -0,0 +1,3 @@
+debian/OVMF_CODE-pure-efi.fd
+debian/OVMF_VARS-pure-efi.fd
+debian/Logo.bmp