Commit Graph

2844 Commits (master)

Author SHA1 Message Date
Alessandro Ranellucci 52c9897eda New --extrusion-axis option; removed --no-extrusion 2011-12-01 22:34:21 +01:00
Alessandro Ranellucci 830965fc0b Note used settings in exported gcode. #52 2011-12-01 22:20:48 +01:00
Alessandro Ranellucci aab85a4e27 Bugfix: unable to read back config file if start or end gcode was empty. #84 2011-12-01 22:06:07 +01:00
Alessandro Ranellucci e99c9f9e5f Options on command line now override config. Also, "feed rate" was renamed to "speed" everywhere. #77 2011-12-01 22:04:23 +01:00
Alessandro Ranellucci 2a02d26ca5 Fixed regression: fill density = 0 was preventing extra solid layers. #75 2011-12-01 21:15:02 +01:00
Alessandro Ranellucci f7a9c9be63 Bugfix: sometimes holes were detected as contours 2011-12-01 20:57:38 +01:00
Alessandro Ranellucci 133f3a0495 Bugfix: Clipper error occurred under certain circumstances 2011-12-01 19:40:45 +01:00
Alessandro Ranellucci b03afc7f1c Bugfix: some bridges were not detected correctly. #57 2011-11-30 20:32:28 +01:00
Alessandro Ranellucci 52270d6b95 Bugfix: extrusion width ratio gave wrong flow rate under certain circumstances. #80 2011-11-30 18:18:17 +01:00
Alessandro Ranellucci 71c359bb29 Cleaning recent changes 2011-11-30 17:48:00 +01:00
Alessandro Ranellucci 42383dec84 Warn about models with overlapping or intersecting facets but try to repair wrong layers. #16 2011-11-30 16:28:09 +01:00
Alessandro Ranellucci d51a37a0ae Refactoring: moved slicing code to new TriangleMesh class, leaving in STL just what's needed to read that particular input format. Slic3r will now warn if model is not manifold. #16 2011-11-30 16:07:31 +01:00
Alessandro Ranellucci 15d060019f Merge pull request #83 from triffid/solid-fill-zero
allow solid fill layers to be zero
2011-11-30 00:17:41 -08:00
Michael Moon 729905d342 allow solid fill layers to be zero 2011-11-30 12:51:34 +11:00
Alessandro Ranellucci 2970e31540 Bugfix: some bridges being very close could lead to overlapping infill 2011-11-29 11:36:52 +01:00
Alessandro Ranellucci d168ecbb4e Bugfix: fill density = 0 was preventing generation of extra solid layers. #75 2011-11-29 10:15:50 +01:00
Alessandro Ranellucci 248ed8589a Bugfix: error when concentric infill. #73 2011-11-28 22:52:35 +01:00
Alessandro Ranellucci 92e86a2259 Bugfix: plate was lifted even when retracting for Z change 2011-11-28 19:59:39 +01:00
Alessandro Ranellucci 3ad9ed74ae New --solid-infill-feed-rate option. #68 2011-11-28 19:11:26 +01:00
Alessandro Ranellucci 975387d953 New --bridge-feed-rate option. #68 2011-11-28 18:37:53 +01:00
Alessandro Ranellucci 7b50e1bead Enbling autoflush 2011-11-28 10:20:12 +01:00
Alessandro Ranellucci 05dffad56f Releasing 0.5.3 2011-11-27 10:33:36 +01:00
Alessandro Ranellucci 4cdd0f6fd0 Bugfix: sparse and wrong infill was generated for objects with null fill density. Also fixed a division by zero. 2011-11-27 10:12:44 +01:00
Alessandro Ranellucci 22551b64de Bugfix: a recent change broke all options having a zero value 2011-11-26 22:43:12 +01:00
Alessandro Ranellucci 7a5af293a8 Mark slow infill patterns as slow. #20 2011-11-26 22:41:23 +01:00
Alessandro Ranellucci 8ce2c23e52 Bugfix: hard errors when extrusion width was left empty. 2011-11-26 20:51:04 +01:00
Alessandro Ranellucci 2ce697f2b9 Releasing 0.5.2 2011-11-26 17:01:56 +01:00
Alessandro Ranellucci 8e7d00bb34 Avoid unnecessary retractions during infill. #29 2011-11-26 17:01:00 +01:00
Alessandro Ranellucci 72d7e1a5de Don't update progress bar with wxWidgets 2.9.0 and 2.9.1 2011-11-26 16:52:10 +01:00
Alessandro Ranellucci bed502af3c Make the progress bar determinate and output status description. #31 2011-11-26 16:19:30 +01:00
Alessandro Ranellucci 951778439a Bugfix: recent changes broke the "infill every layers" option which didn't alternate infill direction correctly. #70 2011-11-26 15:21:15 +01:00
Alessandro Ranellucci afd8e0a1bd Bugfix: setting temperature to zero didn't remove it from output 2011-11-26 15:11:11 +01:00
Alessandro Ranellucci 0ab1fd4c19 concentric - new superfast infill pattern 2011-11-26 10:38:45 +01:00
Alessandro Ranellucci f3b689d4e0 Bugfix: infill every 'n' layers was broken after recent changes 2011-11-25 18:16:31 +01:00
Alessandro Ranellucci 25c85aada5 Renamed "filament packing density" to "extrusion multiplier". Same values. #4 2011-11-25 11:15:20 +01:00
Alessandro Ranellucci 3c0ea0b57f New --extrusion-width-ratio option. #8 2011-11-25 11:10:35 +01:00
Alessandro Ranellucci 465bef1748 Raising dev version to 0.5.2beta and updating MANIFEST 2011-11-24 14:24:01 +01:00
Alessandro Ranellucci 9005d5a98d Preparing to release 0.5.1 2011-11-24 13:21:06 +01:00
Alessandro Ranellucci 47d347e1b2 Revert "Disable retraction when moving over infill space. #29"
This reverts commit d6ed9c6f34.
2011-11-24 12:53:09 +01:00
Alessandro Ranellucci 0ecfd68c10 Changed version number to 0.5.1beta 2011-11-23 14:22:21 +01:00
Alessandro Ranellucci 8598b66b0a Large refactoring. Cleaner logic, smaller memory footprint. 2011-11-23 12:29:27 +01:00
Alessandro Ranellucci 13ef24b5eb Fixes, improvements and refactoring for bridges and solid surfaces. 2011-11-23 09:49:39 +01:00
Alessandro Ranellucci d13a0e2503 Bugfix: no top surfaces when they were too close to bridges 2011-11-22 21:45:05 +01:00
Alessandro Ranellucci 048410ac52 Bugfix: some infill lines extruded outside objects when using 45° infill angle. #65 2011-11-22 20:35:05 +01:00
Alessandro Ranellucci 84d9f5fd9d Bugfix: some regions near bridges were left blank. #58 2011-11-21 21:05:00 +01:00
Alessandro Ranellucci 36e1ea0caa Make sure bridges don't overlap. #58 2011-11-21 16:35:10 +01:00
Alessandro Ranellucci 74786185e4 Don't die on non-manifold models, after having tried the slower detection algorithm too. #16 2011-11-21 16:09:13 +01:00
Alessandro Ranellucci 00beb7e118 Merge branch 'new-bridges' 2011-11-21 12:49:41 +01:00
Alessandro Ranellucci d6ed9c6f34 Disable retraction when moving over infill space. #29 2011-11-21 12:37:12 +01:00
Alessandro Ranellucci bde3c11e82 Fixes to the new bridging algorithm. It appears to be working fine now 2011-11-20 22:09:59 +01:00